STANDARDS September UPDATE. New Quality Collection. Online version

Transcription

1 UPDATE STANDARDS September Online version UpdateStandardsOnline 2010 Contents New Quality Collection The ISO 9000 Standards Collection Quality Management Systems* *See back cover for more information 4 Quick Reference Guide 14 New and revised British Standards 14 BS EN and DD ENV publications 18 British Standard implementations 21 Published Documents 22 Drafts for Development 23 Education publications 23 Publicly Available Specifications 23 Specialist books from BSI 23 Kits, sets, packs and series 24 Corrigenda to British Standards 25 Updated British Standards 26 British Standards proposed for confirmation and confirmed 39 British Standards proposed for obsolescence and declared obsolescent 43 British Standards proposed for withdrawal and withdrawn 46 British Standards under review 51 New work started 60 Draft British Standards 66 Documents not issued as DPCs 66 CEN/CENELEC UAP procedure 66 CEN publications 68 CENELEC publications 71 IEC publications 74 ISO publications raising standards worldwide

2 Customer Services Your first point of contact 9 am to 5 pm GMT Monday to Friday Call Customer Services now: To purchase standards and publications For further information on standards, publications and our services To find out about BSI Membership To reserve your place on one of our seminars and conferences. Help us give you the best customer service If you have done business with us before, please quote your account number When phoning, always take a note of the name of the Customer Service Advisor you are speaking to If you are responding to literature please quote the reference code. How to order Telephone +44 (0) Website orders@bsigroup.com to place an order info@bsigroup.com to make an enquiry Fax +44 (0) Post BSI Customer Services 389 Chiswick High Road London W4 4AL We welcome all your feedback, please contact us with your comments. Your calls may be recorded and/or monitored to help us improve our service to you. **ATTENTION BSI MEMBERS** If you are a BSI Member you can order on your credit account. Standards and publications may also be ordered via the BSI shop at *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0) BSI British Standards Institution 2010

3 +44 (0) Get Chapter 1 of the latest BSI books When you visit the bookshop on BSI s website, you ll find free sample chapters are available for you to download. You ll find books on BCM, ICT, risk, supply chain management, fire safety, Eurocodes and many, many more. Why not browse and Find the books you need for your sector PD 25666:2010 Business continuity management. Guidance on exercising and testing for continuity and contingency programmes BSI is publishing a series of guidance documents that expand on key topics from the business continuity standard BS The new series is a set of Published Documents (PDs) authored by the same committee as BS The first out, PD 25666, provides a framework for, or signposts to, good practice for any organization that wishes to engage in exercising activities. Arrangements for information technology (IT) systems also fall under this general guidance. Read more and order at raising standards worldwide

4 British Standards Quick Reference Guide The following British Standards are listed or referred to in this issue of Update Standards with the exception of those in New Work Started. Building and civil engineering BS , 44 BS BS BS BS BS BS BS , 44 BS BS BS BS BS BS EN BS EN BS EN , 15 BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS ISO , 44 BS ISO PD Consumer products and services BS , 44 BS BS , 44 BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS , 44 BS BS , 44 BS BS BS BS DD , 44 BS EN BS EN BS EN BS EN ISO , 45 BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN BS EN BS EN BS EN BS EN , 44 BS EN ISO BS EN , 45 BS EN ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO , 44 BS ISO BS ISO , 44 BS ISO BS ISO , 44 BS ISO , 44 BS ISO , 44 BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO Electrotechnical BS BS BS BS BS BS BS BS , 40 BS BS BS BS , 43 BS BS , 44 BS BS BS BS BS BS , 44 BS BS BS BS , 44 BS BS BS BS BS BS BS BS BS BS BS 9612 N BS 9612 N BS 9612 N BS 9612 N BS 9612 N BS 9612 N BS 9612 N BS 9612 N BS 9612 N BS 9612 N BS 9612 N BS BS BS BS BS BS BS BS BS BS DD CEN ISO/TS DD CEN ISO/TS BS EN ISO BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN , 44 BS EN , 26 BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN , 25, 45 BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS ISO BS ISO BS IEC DD IEC/PAS , 45 DD IEC/TS DD IEC/TS PD CEN/TR PD CISPR/TR , 44 PD ISO/TR PD CLC/TR PD CLC/TR PD IEC/TR , 44 PD IEC/TR PD IEC/TR PD IEC/TR PD IEC/TR PD IEC TR PD IEC/TR PD IEC/TR BS QC BS QC BS QC Engineering BS BS Prices may be subject to change. Update Standards Sep 2010

5 British Standards Quick Reference Guide continued... BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS , 30 BS BS BS BS BS , 31 BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS 4633 and BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS , 44 BS BS BS BS BS BS BS BS , 44 BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS , 44 BS BS BS BS BS BS BS DD CEN/TS BS EN BS EN BS EN ISO , 47 BS EN BS EN BS EN BS EN BS EN BS EN BS EN ISO BS EN BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN BS EN BS EN ISO BS EN BS EN BS EN BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN , 45 BS EN , 45 BS EN BS EN ISO BS EN ISO , 45 BS EN ISO BS EN ISO BS EN ISO , 44 BS EN BS EN ISO , 45 BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN BS EN ISO BS EN BS EN BS EN BS EN BS EN BS EN BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO , 44 BS ISO , 44 BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO , 20 BS ISO BS ISO BS ISO BS ISO Update Standards Sep 2010 Prices may be subject to change. 5

6 British Standards Quick Reference Guide continued... BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO , 50 BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS IEC BS IEC BS IEC BS IEC BS IEC BS IEC DD ISO/PAS DD ISO/TS PD PD ISO/TR PD ISO/TR PD ISO/TR BS 2A BS 4G BS G BS G BS G BS 6L BS 6L BS 5L BS 7L BS 4L BS 4L BS 3L BS 2L BS L BS L BS L BS L BS L BS 2L BS L BS L BS 2M BS M BS PL BS PL BS PL BS PL BS PL BS PL BS SP 55 and SP BS AU BS AU 2a...38 BS AU BS AU BS AU BS AU BS AU BS AU BS AU BS AU BS AU BS AU BS AU BS AU 24a...38 BS AU BS AU BS AU 30b...38 BS AU 114b...38 BS AU 141a...42 BS AU 146b...38 Health and environment BS BS BS BS BS , 47 BS BS EN , 45 BS EN BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN BS EN ISO BS EN ISO BS EN BS EN ISO BS EN , 24, 25 BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO PD CEN/TR PD CEN/TR PD CR Information systems BS , 44 BS BS BS , 37 BS EN ISO BS EN ISO BS EN BS EN BS EN , 45 BS ISO , 44, 45 BS ISO BS ISO BS ISO BS ISO BS ISO/IEC , 26 BS ISO/IEC BS ISO/IEC , 50 BS ISO BS ISO/IEC BS ISO BS ISO/IEC BS ISO BS ISO/IEC BS ISO/IEC BS ISO/IEC DD ISO/TS DD IEC/PAS , 45 PD ISO/IEC TR Management systems BS BS EN , 45 BS EN BS ISO BS ISO BS IEC , 45 PD Materials and chemicals BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS , 28 BS BS , 44 BS BS BS BS BS BS BS BS BS BS BS BS BS BS , 43 BS , 39 BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS , 33 BS BS Prices may be subject to change. Update Standards Sep 2010

7 3rd Annual Conference & Workshop Risk Management November-1 December 2010, Grange City Hotel, London Integrate an effective risk management strategy into your business Implementing risk management standards will help you build a solid strategy for success, but how do you integrate this strategy into your business culture? Now in its third year, BSI's Risk Management Conference & Workshop will provide you with expert guidance on how to fully integrate your risk management strategy into the business. Find out how to embed risk into your business culture using standards such as BS and ISO Exciting new format! Whether you are relatively new to your career in risk management or if you are an experienced risk manager/director, the 2010 BSI Risk Management conference has something for you. This year s event will feature a morning session and an afternoon session, specifically tailored to your level of seniority. Read more and book your place today! (0) orders@bsigroup.com Sponsor: Supported by: Tel +44 (0) Fax +44 (0) orders@bsigroup.com Standards and publications may also be ordered via the BSI shop at *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0) BSI British Standards Institution th Annual Conference & Workshop Business Continuity Management September 2010, Dexter House, London You never know what's around the corner... Nobody can predict the future, but we can certainly prepare for it. Business leaders need to ensure their organizations are geared to handle unforeseen changes in the social, political, business and natural environments. BSI s Business Continuity Management Conference will update you on the main threats to business continuity. Find out about the UK BCM standard, BS 25999, and how it differs from the upcoming ISO Continuity management systems: requirements. Through case studies and discussion sessions, you ll hear how other organizations have optimized their BCM strategies using standards. Sponsor: Supported by: Media partner: Pre-conference workshop Monday 27 September 2010 Validating your BC plans, processes and arrangements How to exercise and test BSI s conference workshops provide detailed learning, guidance and practical advice through small groups and one-to-one interaction with highly skilled and knowledgeable tutors. Read more and book your place today! (0) orders@bsigroup.com Tel +44 (0) Fax +44 (0) orders@bsigroup.com Standards and publications may also be ordered via the BSI shop at *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0) BSI British Standards Institution 2010

8 British Standards Quick Reference Guide continued... BS , 34 BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS , 44 BS BS BS BS BS BS , 43 BS , 38 BS BS BS BS BS BS DD CEN/TS , 45 DD CEN/TS DD CEN/TS DD CEN/TS BS EN ISO BS EN ISO BS EN BS EN BS EN ISO BS EN BS EN BS EN ISO BS EN ISO , 45 BS EN ISO BS EN ISO BS EN ISO BS EN ISO , 44 BS EN ISO BS EN ISO BS EN ISO , 45 BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN , 45 BS EN BS EN ISO BS EN BS EN ISO BS EN , 45 BS EN ISO BS EN ISO BS EN BS EN ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO , 45 BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO DD ISO/TS PD CEN/TR PD CEN/TR PD ISO/TR Alpha-numeric sequence of British Standards quoted in this issue BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS , 44 BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS , 28 BS , 44 BS BS BS , 44 BS , 44 BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS , 44 BS BS BS BS BS BS BS BS BS , 43 BS BS BS BS BS , 30 BS BS BS , 39 BS BS BS BS BS BS BS BS , 31 BS BS Prices may be subject to change. Update Standards Sep 2010

9 3 rd Annual Conference & Workshop Energy Management September 2010, Grange City Hotel, London Save money and the environment by improving your energy efficiency Ask yourself the following question: is my business doing everything it can to cut energy consumption, costs and carbon emissions? If the answer is no or yes but, it s time to review your energy management system. Attend BSI s 3rd Annual Energy Management Conference to find out how to make significant energy efficiency gains using standards. Through discussion sessions and cases studies, you ll learn how to implement BS EN and ISO in order to minimize energy usage and reduce green house gas emissions. You ll also hear about ISO 50001, a brand new standard covering energy management systems. Read more at 5 reasons why you can t afford to miss this conference: Hear from leading energy management consultants and industry experts involved in developing the latest standards Get practical advice on improving your energy management processes and embedding standards, such as BS EN Hear how other companies have improved their energy efficiency and cut costs using standards Find out about new regulatory incentives and CRC Energy Efficiency Scheme Network with your industry peers over coffee or a glass of wine Who should attend? Energy managers Facilities managers Environment officer/managers Energy engineers Energy consultants Energy service providers Finance directors Sustainability consultants Sponsored by: Book your place today! (0) orders@bsigroup.com To book online visit or contact BSI Customer Services quoting marketing reference code EMCONF/J-U raising standards worldwide Standards and publications may also be ordered via the BSI shop at *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0) BSI British Standards Institution 2010

10 Alpha-numeric Sequence of British Standards continued... BS BS BS BS BS BS , 40 BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS 4633 and BS BS BS , 43 BS BS BS BS BS BS BS BS BS BS BS , 44 BS BS BS BS , 33 BS BS BS BS , 47 BS BS BS BS BS BS BS BS BS BS BS , 34 BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS , 44 BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS , 44 BS BS BS , 44 BS BS BS BS , 44 BS BS , 44 BS BS BS BS BS BS BS BS , 44 BS BS BS BS BS BS BS BS BS BS BS BS BS , 44 BS BS BS BS BS BS , 43 BS , 44 BS , 38 BS BS BS BS BS BS BS , 44 BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS , 37 BS BS BS BS BS BS BS BS BS BS BS BS 9612 N BS 9612 N BS 9612 N BS 9612 N BS 9612 N BS 9612 N BS 9612 N BS 9612 N BS 9612 N BS 9612 N BS 9612 N BS BS BS BS BS BS BS BS BS BS BIP BIP 2200 PP 1990 Pack of BIP 2200 PP 1990 Single copy...23 BIP KIT KIT KIT KIT KIT KIT KIT KIT KIT DD , Prices may be subject to change. Update Standards Sep 2010

11 Alpha-numeric Sequence of British Standards continued... DD CEN/TS DD CEN/TS , 45 DD CEN/TS DD CEN/TS DD CEN/TS DD CEN ISO/TS DD CEN ISO/TS BS EN , 45 BS EN ISO BS EN BS EN ISO BS EN BS EN BS EN BS EN BS EN ISO , 45 BS EN BS EN BS EN BS EN BS EN , 15 BS EN BS EN BS EN ISO BS EN ISO , 47 BS EN ISO BS EN BS EN BS EN BS EN ISO BS EN BS EN BS EN BS EN ISO , 45 BS EN BS EN ISO BS EN ISO BS EN BS EN BS EN ISO BS EN ISO BS EN BS EN ISO BS EN ISO BS EN ISO , 44 BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO , 45 BS EN ISO BS EN ISO BS EN ISO BS EN BS EN BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN BS EN BS EN BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN BS EN BS EN BS EN BS EN BS EN BS EN , 45 BS EN ISO BS EN BS EN BS EN BS EN BS EN BS EN , 45 BS EN , 45 BS EN BS EN BS EN ISO BS EN ISO BS EN BS EN BS EN ISO BS EN BS EN BS EN ISO , 45 BS EN BS EN , 45 BS EN BS EN BS EN ISO BS EN ISO BS EN BS EN ISO , 44 BS EN BS EN ISO BS EN ISO BS EN BS EN BS EN , 44 BS EN BS EN ISO , 45 BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN , 45 BS EN BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN BS EN BS EN BS EN ISO BS EN BS EN ISO BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN , 45 BS EN BS EN , 44 BS EN , 26 BS EN BS EN BS EN , 24, 25 BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN , 25, 45 BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN , 45 BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO , 44, 45 BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO , 44 BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO , 44 BS ISO , 44 BS ISO BS ISO , 45 BS ISO , 44 BS ISO BS ISO BS ISO BS ISO , 44 BS ISO BS ISO BS ISO , 44 BS ISO , 44 BS ISO BS ISO Update Standards Sep 2010 Prices may be subject to change. 11

12 Alpha-numeric Sequence of British Standards continued... BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO , 44 BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO/IEC , 26 BS ISO BS ISO/IEC BS ISO BS ISO BS ISO BS ISO , 20 BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO/IEC , 50 BS ISO BS ISO BS ISO BS ISO BS ISO , 50 BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO/IEC BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO/IEC BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO/IEC BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO/IEC BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO/IEC BS ISO BS IEC BS IEC BS IEC , 45 BS IEC BS IEC BS IEC BS IEC BS IEC DD ISO/PAS DD ISO/TS DD ISO/TS DD ISO/TS DD IEC/PAS , 45 DD IEC/PAS , 45 DD IEC/TS DD IEC/TS PD CEN/TR PD CEN/TR PD CEN/TR PD CEN/TR PD CEN/TR PD PD PD PD CR PD PD CISPR/TR , 44 PD ISO/TR PD ISO/TR PD ISO/TR PD ISO/TR PD ISO/IEC TR PD ISO/TR PD CLC/TR PD CLC/TR PD IEC/TR , 44 PD IEC/TR PD IEC/TR PD IEC/TR PD IEC/TR PD IEC TR PD IEC/TR PD IEC/TR BS 2A BS 4G BS G BS G BS G BS 6L BS 6L BS 5L BS 7L BS 4L BS 4L BS 3L BS 2L BS L BS L BS L BS L BS L BS 2L BS L BS L BS 2M BS M BS PL BS PL BS PL BS PL BS PL BS PL BS QC BS QC BS QC BS SP 55 and SP BIP PP BS AU BS AU 2a...38 BS AU BS AU BS AU BS AU BS AU BS AU BS AU BS AU BS AU BS AU BS AU BS AU 24a...38 BS AU BS AU BS AU 30b...38 BS AU 114b...38 BS AU 141a...42 BS AU 146b...38 PAS Prices may be subject to change. Update Standards Sep 2010

13 Online tool BSI Quality Management Self-assessment Ensure supply chain confidence by complying with ISO 9001 The new BSI Quality Management Self-assessment tool will give you confidence in your quality management policies and processes. It will allow you to assess your quality management system (QMS) and to record and report compliance with ISO It will help you demonstrate to your supply chain, senior management, or external auditors that you are consistently delivering high quality products and services. The standard has helped many companies: Improve the quality and consistency of their products Reduce poor quality goods being returned Build customer/supplier relationships Increase profit margins Reduce cost, production time and wastage. The tool provides a guide to the various aspects of planning, implementing, operating, checking and reviewing your system by taking the user through a question and answer session with in depth guidance material to help at every step. It will highlight what is already in place in terms of a QMS, what is working well and what is missing and/or needs attention. Reasons to subscribe to BSI Quality Management Self-assessment This new tool will help you: Build and manage an organizational structure for self-assessment by allocating sections of questions to other users Benchmark across the organization with comparison reports, show differences in compliance between sites, or report progress over time Browse standards and guidance online or download full PDFs. FREE 2 WEEK TRIAL Who should use this tool? This tool is designed for all organizations that wish to implement or continue their QMS programme. It can be used by organizations of all sizes, across all sectors that are intending to establish, implement, maintain or improve their QMS. Also useful to those embarking on the route to certification, self-assessment or third party assessment. What does BSI Quality Management Self-assessment include? The BSI Quality Management Self-assessment tool is a self-contained online resource that will also give you access to a reference library including: BS EN ISO 9001:2008 Quality management systems. Requirements BS EN ISO 9000:2005 Quality management systems. Fundamentals and vocabulary Understanding ISO 9001:2008 and Process-based Management Systems Creating a Process-based Management System for ISO 9001:2008 and Beyond Process Management Auditing for ISO 9001:2008. NB: BS EN ISO 9004:2009 will be fully implemented in Subscribe now BSI Quality Management Self-assessment can provide you with the confidence that your organization has implemented a QMS supporting continual assessment and improvement in line with ISO For further information or to subscribe, visit Price: VAT Single user price valid for one year. Enterprise licences are available on request. To subscribe visit or contact BSI Customer Services quoting marketing reference code QOSAJ-U Tel +44 (0) Fax +44 (0) orders@bsigroup.com raising standards worldwide Standards and publications may also be ordered via the BSI shop at *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0) BSI British Standards Institution 2010

14 British Standards BRITISH STANDARDS The following British Standard publications are available from BSI Customer Services (see How to order on page 2). The publications listed below are new and revised British Standards that were made available last month. An existing BSI publication bearing a number identical to one announced below is automatically withdrawn unless stated otherwise. In all other cases of supersession, details are given and a corresponding entry appears in the British Standards withdrawn section. BRITISH STANDARD IMPLEMENTATIONS WILL BE SUPPLIED IN PREFERENCE TO EUROPEAN OR INTERNATIONAL STANDARDS, UNLESS OTHERWISE REQUESTED. Please order by the British Standard reference not the ISBN number. BS 2000 series standards are also available from:- Library of the Energy Institute 61 New Cavendish Street London W1G 7AR Tel: Fax: lis@energyinst.org.uk For this series, member pricing is applicable to BSI and Energy Institute members. BS 5733:2010 General requirements for electrical accessories. Specification supersedes BS 5733:1995 which remains current ISBN members, non-members PEL/23 BS 8418:2010 Installation and remote monitoring of detectoractivated CCTV systems. Code of practice supersedes BS 8418:2003 which remains current ISBN members, non-members GW/1/10 BS 8530:2010 Traditional-style half round, beaded half round, Victorian ogee and moulded ogee aluminium rainwater systems. Specification supersedes BS 2997:1958 ISBN B/542/6 BS EN PUBLICATIONS The following are British Standard implementations of the English language versions of European Standards (ENs). BSI has an obligation to publish all ENs and to withdraw any conflicting British Standards. This has led to a series of standards, BS ENs, using the EN number. Note: The date referenced in the identifier is the date of the European standard. BS EN 3-10:2009 Portable fire extinguishers. Provisions for evaluating the conformity of a portable fire extinguisher to EN 3-7 supersedes BS EN 3-6:1996 ISBN members, non-members FSH/2 BS EN 131-2:2010 Ladders. Requirements, testing, marking supersedes BS EN 131-2:1993 ISBN members, non-members B/512 BS EN ISO 179-1:2010 Plastics. Determination of Charpy impact properties. Non-instrumented impact test supersedes BS EN ISO 179-1:2001 ISBN PRI/21 BS EN 257:2010 Mechanical thermostats for gas-burning appliances supersedes BS EN 257:1992 ISBN members, non-members GSE/22 BS EN 384:2010 Structural timber. Determination of characteristic values of mechanical properties and density supersedes BS EN 384:2004 ISBN B/518 BS EN 438-9:2010 High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates). Classification and specifications for alternative core laminates ISBN PRI/76 BS EN 843-7:2010 Advanced technical ceramics. Mechanical properties of monolithic ceramics at room temperature. C-ring tests ISBN RPI/13 BS EN 843-8:2010 Advanced technical ceramics. Mechanical properties of monolithic ceramics at room temperature. Guidelines for conducting proof tests ISBN RPI/13 BS EN 894-4:2010 Safety of machinery. Ergonomics requirements for the design of displays and control actuators. Location and arrangement of displays and control actuators ISBN members, non-members PH/9 BS EN :2010 Wood preservatives. Creosote and creosoted timber. Methods of sampling and analysis. Procedure for sampling creosote supersedes BS EN :1995 ISBN members, non-members B/515 BS 8423:2010 Fireguards for fires and heating appliances for domestic use. Specification supersedes BS 8423:2002 ISBN CW/1/3 BS EN ISO 286-2:2010 Geometrical product specifications (GPS). ISO code system for tolerances on linear sizes. Tables of standard tolerance classes and limit deviations for holes and shafts supersedes BS EN :1993 ISBN members, non-members TDW/4 BS EN :2010 Wood preservatives. Creosote and creosoted timber. Methods of sampling and analysis. Procedure for obtaining a sample of creosote from creosoted timber for subsequent analysis supersedes BS EN :1996 ISBN members, non-members B/ Prices may be subject to change. Update Standards Sep 2010

15 BS EN :2010 Wood preservatives. Creosote and creosoted timber. Methods of sampling and analysis. Determination of the benzo(a)pyrene content of creosote supersedes BS EN :1998 ISBN B/515 BS EN :2010 Wood preservatives. Creosote and creosoted timber. Methods of sampling and analysis. Determination of the water-extractable phenols content of creosote supersedes BS EN :1996 ISBN members, non-members B/515 BS EN :2010 Tests for mechanical and physical properties of aggregates. Methods for the determination of resistance to fragmentation supersedes BS EN :1998 ISBN members, non-members B/502 BS EN ISO 1211:2010 Milk. Determination of fat content. Gravimetric method (Reference method) supersedes the dual numbered standard BS EN ISO 1211:2001, BS :2001 ISBN AW/5 BS EN 1816:2010 Resilient floor coverings. Specification for homogeneous and heterogeneous smooth rubber floor coverings with foam backing supersedes BS EN 1816:1998 ISBN members, non-members PRI/3/60 BS EN 1817:2010 Resilient floor coverings. Specification for homogeneous and heterogeneous smooth rubber floor coverings supersedes BS EN 1817:1998 ISBN members, non-members PRI/3/60 BS EN :2010 Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 C to 175 C continuous, 200 C continuous, 260 C peak. Protective cover for receptacle. Product standard supersedes BS EN :2006 ISBN members, non-members ACE/6 BS EN :2010 Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 C to 175 C continuous, 200 C continuous, 260 C peak. Protective cover for plug. Product standard supersedes BS EN :2006 ISBN members, non-members ACE/6 BS EN :2010 Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 C to 175 C continuous, 200 C continuous, 260 C peak. Dummy receptacle. Product standard supersedes BS EN :2006 ISBN members, non-members ACE/6 BS EN ISO 3210:2010 Anodizing of aluminium and its alloys. Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution supersedes BS EN :1999 and BS EN :2002 ISBN STI/32 BS EN 3264:2010 Aerospace series. Pipe coupling 8 30 in titanium alloy. Thrust wire nuts supersedes BS EN 3264:2001 ISBN members, non-members ACE/12 BS EN :2010 Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Cable outlet, style K, straight, shielded, sealed, for heat shrinkable boot. Product standard ISBN ACE/6 BS EN 3838:2010 Aerospace series. Requirements and tests on user-applied markings on aircraft electrical cables ISBN ACE/6 BS EN 4115:2010 Aerospace series. Cushion, rubber for clamps. Dimensions, masses supersedes BS EN 4115:2001 ISBN members, non-members ACE/12 BS EN ISO 4498:2010 Sintered metal materials, excluding hardmetals. Determination of apparent hardness and microhardness supersedes BS EN ISO 4498:2007 ISBN ISE/65 BS EN ISO 4787:2010 Laboratory glassware. Volumetric instruments. Methods for testing of capacity and for use supersedes BS 1797:1987 and BS 6696:1986 ISBN LBI/36/1 BS EN ISO 7231:2010 Polymeric materials, cellular, flexible. Determination of air flow value at constant pressure-drop supersedes BS EN ISO 7231:1998 ISBN PRI/24 BS EN ISO 7599:2010 Anodizing of aluminium and its alloys. General specifications for anodic oxidation coatings on aluminium supersedes BS EN :2001 ISBN STI/32 BS EN :2010 Aerospace series. Quality management systems. Requirements for aerospace quality management system (AQMS) auditor training and qualification supersedes BS EN :2009 ISBN ACE/1 BS EN 9120:2010 Quality management systems. Requirements for aviation, space and defence distributors supersedes BS EN 9120:2005 ISBN ACE/1 BS EN ISO :2010 Continuously hot-rolled stainless steel. Tolerances on dimensions and form. Wide strip and sheet/plate ISBN ISE/105 To order visit Update Standards Sep 2010 Prices may be subject to change. 15

16 BS EN Publications continued... BS EN ISO 10423:2009 Petroleum and natural gas industries. Drilling and production equipment. Wellhead and christmas tree equipment CD-ROM supersedes BS EN ISO 10423:2004 ISBN members, non-members PSE/17/-/4 VAT is applicable to this item. BS EN ISO 10451:2010 Dentistry. Contents of technical file for dental implant systems supersedes BS EN ISO 10451:2002 ISBN CH/106/8 BS EN ISO 10765:2010 Footwear. Test method for the characterization of elastic materials. Tensile performance ISBN BS EN ISO 10768:2010 Footwear. Test method for the determination of the resistance of elastic materials for footwear to repeated extension. Fatigue resistance ISBN members, non-members BS EN ISO 11130:2010 Corrosion of metals and alloys. Alternate immersion test in salt solution supersedes BS EN ISO 11130:1999 ISBN ISE/NFE/8 BS EN ISO 12099:2010 Animal feeding stuffs, cereals and milled cereal products. Guidelines for the application of near infrared spectrometry ISBN members, non-members AW/10 BS EN 12288:2010 Industrial valves. Copper alloy gate valves supersedes BS EN 12288:2003 ISBN PSE/18/2 BS EN :2010 Flexible sheets for waterproofing. Determination of tensile properties. Plastic and rubber sheets for roof waterproofing supersedes BS EN :2000 ISBN members, non-members B/546/2 BS EN :2010 Flexible sheets for waterproofing. Determination of shear resistance of joints. Plastic and rubber sheets for roof waterproofing supersedes BS EN :2000 ISBN members, non-members B/546/2 BS EN :2010 Plastics. Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications. Designation of PVC-U profiles supersedes BS EN :2004 ISBN PRI/82 BS EN ISO 13709:2009 Centrifugal pumps for petroleum, petrochemical and natural gas industries CD-ROM supersedes BS EN ISO 13709:2003 ISBN members, non-members MCE/6 VAT is applicable to this item. BS EN 13798:2010 Hydrometry. Specification for a reference raingauge pit supersedes BS EN 13798:2002 ISBN CPI/113 BS EN :2010 Flexible sheets for waterproofing. Definitions and characteristics of underlays. Underlays for discontinuous roofing supersedes BS EN :2005+A1:2008 ISBN members, non-members B/546/5 BS EN ISO 13967:2009 Thermoplastics fittings. Determination of ring stiffness ISBN PRI/88/4 BS EN :2010 Timber structures. Strength graded structural timber with rectangular cross section. Machine grading. Additional requirements for initial type testing supersedes BS EN :2005 ISBN B/518 BS EN 14151:2010 Geosynthetics. Determination of burst strength ISBN members, non-members B/553 BS EN ISO 14245:2010 Gas cylinders. Specifications and testing of LPG cylinder valves. Self-closing supersedes BS EN 13152:2002 and BS ISO 14245:2006 ISBN PVE/19 BS EN :2010 Advanced technical ceramics. Test methods for determination of fracture toughness of monolithic ceramics. Chevron notched beam (CNB) method supersedes DD CEN/TS :2003 ISBN RPI/13 BS EN 14490:2010 Execution of special geotechnical works. Soil nailing partially supersedes BS 8006:1995 ISBN members, non-members B/526/4 BS EN 14635:2010 Glass packaging. 26 H 126 crown finish. Dimensions supersedes BS EN 14635:2006 ISBN members, non-members PKW/0/-/7 BS EN ISO :2009 Petroleum and natural gas industries. Progressing cavity pump systems for artificial lift. Pumps CD-ROM supersedes BS EN ISO :2001 ISBN members, non-members PSE/17/-/4 VAT is applicable to this item. BS EN ISO 15653:2010 Metallic materials. Method of test for the determination of quasistatic fracture toughness of welds supersedes BS :1997 ISBN members, non-members ISE/101/4 BS EN :2010 Influence of metallic materials on water intended for human consumption. Dynamic rig test for assessment of metal release. Test waters ISBN members, non-members EH/6 16 Prices may be subject to change. Update Standards Sep 2010

17 BS EN 15727:2010 Ventilation for buildings. Ducts and ductwork components, leakage classification and testing ISBN RHE/2 BS EN 15761:2009 Pre-shaped growing media. Determination of length, width, height, volume and bulk density ISBN AW/20 BS EN 15823:2010 Packaging. Braille on packaging for medicinal products supersedes DD 264:2007 ISBN PKW/0/-/5 BS EN 15860:2010 Plastics. Thermoplastic semi-finished products for machining. Requirements and test methods ISBN members, non-members PRI/82 BS EN ISO 15995:2010 Gas cylinders. Specifications and testing of LPG cylinder valves. Manually operated supersedes BS EN 13153:2002 and BS ISO 15995:2006 ISBN members, non-members PVE/19 BS EN ISO :2010 Petroleum and natural gas industries. Drilling and production equipment. Practices for sidepocket mandrels and related equipment CD-ROM ISBN members, non-members PSE/17/-/4 VAT is applicable to this item. BS EN ISO 17264:2009 Intelligent transport systems. Automatic vehicle and equipment identification. Interfaces ISBN EPL/278 BS EN ISO 17678:2010 Milk and milk products. Determination of milk fat purity by gas chromatographic analysis of triglycerides (Reference method) ISBN AW/5 BS EN ISO 18286:2010 Hot-rolled stainless steel plates. Tolerances on dimensions and shape ISBN ISE/105 BS EN ISO 21258:2010 Stationary source emissions. Determination of the mass concentration of dinitrogen monoxide (N2O). Reference method. Non-dispersive infrared method ISBN members, non-members EH/2/1 BS EN ISO :2010 Health informatics. Patient healthcard data. Links ISBN IST/35 BS EN ISO :2010 Geometrical product specifications (GPS). Surface texture. Areal. Nominal characteristics of contact (stylus) instruments ISBN TDW/4 BS EN ISO :2010 Geometrical product specifications (GPS). Surface texture. Areal. Nominal characteristics of non-contact (confocal chromatic probe) instruments ISBN members, non-members TDW/4 BS EN ISO :2010 Geometrical product specifications (GPS). Surface texture. Areal. Calibration and measurement standards for contact (stylus) instruments ISBN members, non-members TDW/4 BS EN ISO 28158:2010 Dentistry. Integrated dental floss and handles ISBN CH/106/7 BS EN 50215:2009 Railway applications. Rolling stock. Testing of rolling stock on completion of construction and before entry into service supersedes BS EN 50215:1999 ISBN members, non-members GEL/9/2 BS EN :2009 General requirements for home and building electronic systems (HBES) and building automation and control systems (BACS). Electrical safety requirements partially supersedes BS EN :1996+A2:2007 ISBN IST/6 BS EN :2010 General requirements for home and building electronic systems (HBES) and building automation and control systems (BACS). EMC requirements, conditions and test set-up partially supersedes BS EN :1996+A2:2007 ISBN IST/6 BS EN :2010 General requirements for home and building electronic systems (HBES) and building automation and control systems (BACS). EMC requirements for HBES/BACS used in residential, commercial and light industry environment partially supersedes BS EN :1996+A2:2007 ISBN IST/6 BS EN :2010 General requirements for home and building electronic systems (HBES) and building automation and control systems (BACS). EMC requirements for HBES/BACS used in industry environment partially supersedes BS EN :1996+A2:2007 ISBN members, non-members IST/6 BS EN :2010 Specification for radio disturbance and immunity measuring apparatus and methods. Radio disturbance and immunity measuring apparatus. Antennas and test sites for radiated disturbance measurements supersedes BS EN :2007+A2:2009 which remains current ISBN members, non-members GEL/210/12 BS EN :2010 Specification for radio disturbance and immunity measuring apparatus and methods. Methods of measurement of disturbances and immunity. Radiated disturbance measurements supersedes BS EN :2006 which remains current ISBN members, non-members GEL/210/12 Update Standards Sep 2010 Prices may be subject to change. 17

18 BS EN Publications continued... BS EN :2009 Measuring relays and protection equipment. Functional requirements for over/under current protection supersedes BS EN :1998 which remains current ISBN members, non-members PEL/95 BS EN :2009 Dependability management. Application guide. Engineering of system dependability supersedes BS IEC 61713:2000 ISBN members, non-members DS/1 BS EN :2010 Electroacoustics. Simulators of human head and ear. Occluded-ear simulator for the measurement of earphones coupled to the ear by means of ear inserts supersedes BS 6310:1982 ISBN EPL/29 BS EN :2010 Household and similar electrical appliances. Safety. Particular requirements for refrigerating appliances, ice-cream appliances and ice makers supersedes BS EN :2003+A2:2007 ISBN members, non-members CPL/61/3 BS EN :2010 Household and similar electrical appliances. Safety. Particular requirements for UV radiation water treatment appliances ISBN CPL/61/1 BS EN :2010 Connectors for electronic equipment. Tests and measurements. Chemical resistance tests. Test 19a. Fluid resistance of pre-insulated crimp barrels supersedes BS :1993 which remains current ISBN members, non-members EPL/48 BS EN :2010 Medical electrical equipment. General requirements for basic safety and essential performance. Collateral standard. Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment ISBN members, non-members CH/62/1 BS EN :2010 Connectors for electronic equipment. Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 100 MHz supersedes BS EN :2009 ISBN EPL/48 BS EN :2010 Fibre optic interconnecting devices and passive components. Non-wavelength-selective fibre optic branching devices. Generic specification supersedes BS EN :2001 ISBN GEL/86/2 BS EN :2010 Connectors for electronic equipment. Product requirements. Detail specification for circular hybrid connectors M12 with electrical and fibreoptic contacts with screw locking supersedes DD IEC/PAS :2007 ISBN members, non-members EPL/48 BS EN :2010 Maritime navigation and radiocommunication equipment and systems. Global navigation satellite systems (GNSS). Galileo receiver equipment. Performance requirements, methods of testing and required test results ISBN members, non-members EPL/80 BS EN :2010 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Screen testing of ceramic alignment split sleeve by stress application supersedes BS EN :2000 ISBN GEL/86/2 BS EN :2010 Communication networks and systems for power utility automation. Basic communication structure. Compatible logical node classes and data object classes supersedes BS EN :2003 ISBN members, non-members PEL/57 BS EN 61907:2010 Communication network dependability engineering ISBN members, non-members DS/1 BS EN :2010 Digital audio. Interface for non-linear PCM encoded audio bitstreams applying IEC MPEG-4 AAC and its extensions in LATM/LOAS ISBN EPL/100 BS EN :2010 Dynamic modules. Performance specification templates. Dynamic channel equalizers ISBN members, non-members GEL/86/3 BS EN 62591:2010 Industrial communication networks. Wireless communication network and communication profiles. WirelessHART supersedes DD IEC/PAS 62591:2009 ISBN members, non-members AMT/7 BS ENs IMPLEMENTED BY AMENDMENT For the standards listed below see also the Corrigenda to British Standards and Updated British Standards sections of this issue of Update Standards. BS EN 62340:2010 Nuclear power plants. Instrumentation and control systems important to safety. Requirements for coping with common cause failure (CCF) NCE/8 Implementation of European Standard EN by amendment to BS IEC 62340:2007 BS IMPLEMENTATIONS BS Implementations comprise the ISO or IEC text without any national deviation and with front and back cover indicating the UK committee responsible. No other information will normally be added. Note: The date referenced in the identifier is the date of the international standard. BS ISO 690:2010 Information and documentation. Guidelines for bibliographic references and citations to information resources supersedes BS 1629:1989 and BS ISO 690-2:1997 ISBN members, non-members IDT/2/2 18 Prices may be subject to change. Update Standards Sep 2010

19 BS ISO 1222:2010 Photography. Tripod connections supersedes BS ISO 1222:2003 ISBN members, non-members CPW/42 BS ISO 2575:2010 Road vehicles. Symbols for controls, indicators and telltales CD-ROM supersedes BS ISO 2575:2004+A4:2009 ISBN members, non-members AUE/12 VAT is applicable to this item. BS ISO 2962:2010 Cheese and processed cheese products. Determination of total phosphorus content. Molecular absorption spectrometric method supersedes BS 770-6:1984 ISBN AW/5 BS ISO :2009 Paper and board. Determination of colour by diffuse reflectance. Indoor daylight conditions (C/2 ) supersedes BS ISO 5631:2000 ISBN PAI/11 BS ISO :2008 Paper and board. Determination of colour by diffuse reflectance. Indoor illumination conditions (D50/2 ) ISBN PAI/11 BS ISO 5721:1989 Tractors for agriculture. Operator s field of vision supersedes BS 6389:1983 ISBN AGE/6 BS ISO 8443:2010 Rolling bearings. Radial ball bearings with flanged outer ring. Flange dimensions ISBN members, non-members MCE/7 BS ISO :2010 Optics and photonics. Optical transfer function. Application. Interchangeable lenses for 35 mm still cameras supersedes BS ISO :1994 ISBN members, non-members CPW/172/1 BS ISO 9533:2010 Earth-moving machinery. Machine-mounted audible travel alarms and forward horns. Test methods and performance criteria supersedes BS :1990 ISBN B/513/1 BS ISO :2010 Lift (Elevator) installation. Class I, II, III and VI lifts supersedes BS ISO :1999 ISBN members, non-members MHE/4 BS ISO 5151:2010 Non-ducted air conditioners and heat pumps. Testing and rating for performance ISBN members, non-members RHE/17 BS ISO 5546:2010 Caseins and caseinates. Determination of ph (Reference method) supersedes BS :1982 ISBN members, non-members AW/5 BS ISO 5597:2010 Hydraulic fluid power. Cylinders. Dimensions and tolerances of housings for single-acting piston and rod seals in reciprocating applications supersedes BS 5751:1987 ISBN MCE/11 BS ISO 6091:2010 Dried milk. Determination of titratable acidity (Reference method) supersedes BS :1982 ISBN members, non-members AW/5 BS ISO 6732:2010 Milk and milk products. Determination of iron content. Spectrometric method (Reference method) supersedes BS :1985 ISBN AW/5 BS ISO :2010 Implants for surgery. Partial and total hip joint prostheses. Determination of endurance properties and performance of stemmed femoral components supersedes BS ISO :2002 ISBN CH/150/4 BS ISO :2010 Petroleum products. Fuels (class F) classification. Categories of marine fuels supersedes BS ISO :2005 ISBN members, non-members PTI/2 BS ISO/IEC :2010 Information technology. Security techniques. Entity authentication. General supersedes BS ISO/IEC :1997 ISBN IST/33 BS ISO 10579:2010 Geometrical product specifications (GPS). Dimensioning and tolerancing. Non-rigid parts supersedes BS ISO 10579:1993 ISBN TDW/4 BS ISO 10638:2010 Rubber. Identification of antidegradants by gas chromatography/mass spectrometry ISBN members, non-members PRI/23 BS ISO :2010 Road vehicles. Communication on FlexRay. General information and use case definition ISBN members, non-members AUE/16 BS ISO :2008 Paper and board. Accelerated ageing. Exposure to elevated temperature at 100 C ISBN PAI/11 BS ISO 8217:2010 Petroleum products. Fuels (class F). Specifications of marine fuels supersedes BS ISO 8217:2005 ISBN members, non-members PTI/2 View Update Standards online at UpdateStandardsOnline Update Standards Sep 2010 Prices may be subject to change. 19

20 BS Implementations continued... BS ISO :2010 Road vehicles. Communication on FlexRay. Communication layer services ISBN members, non-members AUE/16 BS ISO 10710:2010 Water quality. Growth inhibition test with the marine and brackish water macroalga Ceramium tenuicorne ISBN EH/3/5 BS ISO 10872:2010 Water quality. Determination of the toxic effect of sediment and soil samples on growth, fertility and reproduction of Caenorhabditis elegans (Nematoda) ISBN EH/3/5 BS ISO 10932:2010 Milk and milk products. Determination of the minimal inhibitory concentration (MIC) of antibiotics applicable to bifidobacteria and nonenterococcal lactic acid bacteria (LAB) ISBN members, non-members AW/5 BS ISO 10961:2010 Gas cylinders. Cylinder bundles. Design, manufacture, testing and inspection ISBN PVE/3/7 BS ISO :1993 Agricultural wheeled tractors and implements. Three-point hitched couplers. A-frame coupler ISBN members, non-members AGE/6 BS ISO :1994 Agricultural wheeled tractors and implements. Three-point hitch couplers. Bar coupler ISBN members, non-members AGE/6 BS ISO 11471:1995 Agricultural tractors and machinery. Coding of remote hydraulic power services and controls ISBN members, non-members AGE/6 BS ISO 11639:2010 Aerospace. Part numbering for hose assemblies ISBN ACE/69 BS ISO 11684:1995 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment. Safety signs and hazard pictorials. General principles ISBN members, non-members AGE/6 BS ISO 11704:2010 Water quality. Measurement of gross alpha and beta activity concentration in non-saline water. Liquid scintillation counting method ISBN EH/3 BS ISO :2010 Connections for hydraulic fluid power and general use. Hose fittings. Hose fittings with ISO O-ring face seal ends supersedes BS ISO :1999 ISBN MCE/18/-/4 BS ISO :2010 Connections for hydraulic fluid power and general use. Hose fittings. Hose fittings with ISO or ISO flange ends supersedes BS ISO :1999 ISBN MCE/18/-/4 BS ISO 12315:2010 Aluminium oxide primarily used for production of aluminium. Method for calculating the Al 2 O 3 content of smelter-grade alumina ISBN members, non-members CII/24 BS ISO :2008 Graphic technology. Vocabulary. Prepress terms ISBN PAI/43 BS ISO :2009 Graphic technology. Safety requirements for graphic technology equipment and systems. General requirements supersedes BS ISO :2007 which remains current ISBN members, non-members PAI/43 BS ISO :2008 Test conditions for numerically controlled turning machines and turning centres. Geometric tests for machines with a vertical workholding spindle ISBN members, non-members MTE/1/2 BS ISO 13257:2010 Thermoplastics piping systems for non-pressure applications. Test method for resistance to elevated temperature cycling ISBN PRI/88/1 BS ISO 13260:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage. Test method for resistance to combined temperature cycling and external loading ISBN PRI/88/1 BS ISO 13264:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics fittings. Test method for mechanical strength or flexibility of fabricated fittings ISBN PRI/88/1 BS ISO 13268:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics shafts or risers for inspection chambers and manholes. Determination of ring stiffness ISBN PRI/88/1 BS ISO 13655:2009 Graphic technology. Spectral measurement and colorimetric computation for graphic arts images supersedes BS ISO 13655:1996 ISBN members, non-members PAI/43 BS ISO 16192:2010 Space systems. Experience gained in space projects (Lessons learned). Principles and guidelines ISBN ACE/68/-/5 20 Prices may be subject to change. Update Standards Sep 2010

21 BS ISO 17853:2010 Wear of implant materials. Polymer and metal wear particles. Isolation and characterization supersedes BS ISO 17853:2003 ISBN CH/150/4 BS ISO :2010 Implants for surgery. Wear of total intervertebral spinal disc prostheses. Nucleus replacements ISBN CH/150/5 BS ISO :2010 Sustainability in building construction. Framework for methods of assessment of the environmental performance of construction works. Buildings ISBN members, non-members B/558 BS ISO 22413:2010 Transfer sets for pharmaceutical preparations. Requirements and test methods supersedes BS ISO 22413:2007 ISBN CH/212 BS IEC 62465:2010 Nuclear power plants. Instrumentation and control important to safety. Management of ageing of electrical cabling systems ISBN members, non-members NCE/8 BS IEC 62523:2010 Radiation protection instrumentation. Cargo/vehicle radiographic inspection system ISBN NCE/2 BS ISO 18334:2010 Pallets for materials handling. Quality of assembly of new wooden pallets supersedes BS ISO 18334:2003 ISBN members, non-members PKW/0/-/11 BS ISO 18632:2010 Alloyed steel. Determination of manganese. Potentiometric and visual titration method ISBN ISE/102 BS ISO :2009 Optics and photonics. Designation of microscope objectives. Chromatic correction ISBN members, non-members CPW/172/5 BS ISO/IEC 20060:2010 Information technology. Open terminal architecture (OTA). Virtual machine supersedes BS ISO/IEC 20060:2001 ISBN members, non-members IST/17 BS ISO 20806:2009 Mechanical vibration. Criteria and safeguards for the in-situ balancing of medium and large rotors supersedes BS ISO 20806:2004 ISBN members, non-members GME/21/5 BS ISO 21217:2010 Intelligent transport systems. Communications access for land mobiles (CALM). Architecture ISBN members, non-members EPL/278 BS ISO :2010 Space systems. Oxygen safety. Operational and emergency procedures ISBN ACE/68 BS ISO 24100:2010 Intelligent transport systems. Basic principles for personal data protection in probe vehicle information services ISBN members, non-members EPL/278 BS ISO :2006 Language resource management. Feature structures. Feature structure representation ISBN members, non-members TS/1 BS ISO 26462:2010 Milk. Determination of lactose content. Enzymatic method using difference in ph ISBN AW/5 BS IEC 60737:2010 Nuclear power plants. Instrumentation important to safety Temperature sensors (incore and primary coolant circuit). Characteristics and test methods ISBN NCE/8 BS IEC 62463:2010 Radiation protection instrumentation. X-ray systems for the screening of persons for security and the carrying of illicit items ISBN NCE/2 BS IEC 62533:2010 Radiation protection instrumentation. Highly sensitive hand-held instruments for photon detection of radioactive material ISBN NCE/2 BS IEC 62534:2010 Radiation protection instrumentation. Highly sensitive hand-held instruments for neutron detection of radioactive material ISBN NCE/2 PUBLISHED DOCUMENTS PD 25666:2010 Business continuity management. Guidance on exercising and testing for continuity and contingency programmes ISBN members, non-members BCM/1 PD CEN/TR 13097:2010 Characterization of sludges. Good practice for sludge utilisation in agriculture supersedes PD CR 13097:2001 ISBN EH/5 PD CEN/TR 15985:2010 Thermal insulating products. Factory made products of expanded polystyrene (EPS). Voluntary certification of the raw material ISBN members, non-members PRI/72/2 Update Standards Sep 2010 Prices may be subject to change. 21

22 Published Documents continued... PD CEN/TR 15990:2010 Data sheets. Footwear tests materials and test adhesives ISBN PRI/52 PD ISO/TR 12859:2009 Intelligent transport systems. System architecture. Privacy aspects in ITS standards and systems ISBN EPL/278 PD IEC/TR :2009 Electromagnetic compatibility (EMC). Testing and measurement techniques. HPEM simulator compendium ISBN members, non-members GEL/210/12 PD CEN/TR :2010 Workplace exposure. Guide for the use of direct-reading instruments for aerosol monitoring. Choice of monitor for specific applications ISBN EH/2/2 PD CEN/TR 16040:2010 Electronic fee collection. Requirements for urban dedicated short-range communication ISBN members, non-members PD CISPR/TR 18-1:2010 Radio interference characteristics of overhead power lines and high-voltage equipment. Description of phenomena supersedes BS :1994 ISBN members, non-members GEL/210/11 PD CISPR/TR 18-2:2010 Radio interference characteristics of overhead power lines and high-voltage equipment. Methods of measurement and procedure for determining limits supersedes BS :1994 ISBN members, non-members GEL/210/11 PD CISPR/TR 18-3:2010 Radio interference characteristics of overhead power lines and high-voltage equipment. Code of practice for minimizing the generation of radio noise supersedes BS :1994 ISBN members, non-members GEL/210/11 PD ISO/TR 15847:2008 Graphic technology. Graphical symbols for printing press systems and finishing systems, including related auxiliary equipment ISBN members, non-members PAI/43 PD ISO/IEC TR :2010 Information technology. Radio frequency identification device conformance test methods. Test methods for active air interface communications at 433 MHz supersedes PD ISO/IEC TR :2005 ISBN members, non-members IST/34 PD ISO/TR 25743:2010 Lifts (elevators). Study of the use of lifts for evacuation during an emergency ISBN members, non-members MHE/4 PD CLC/TR 50417:2010 Safety of household and similar electrical appliances. Interpretations related to European Standards in the EN series supersedes PD CLC/TR 50417:2003 ISBN members, non-members CPL/61 PD CLC/TR 50484:2009 Recommendations for shielded enclosures ISBN GEL/210/12 PD IEC/TR 60887:2010 Glass bulb designation system for lamps supersedes BS 7132:1989 ISBN CPL/34/1 PD IEC/TR 61916:2009 Electrical accessories. Harmonization of general rules ISBN PEL/23 PD IEC/TR :2010 Metallic communication cable test methods. Electromagnetic compatibility (EMC). Introduction to electromagnetic (EMC) screening measurements ISBN members, non-members EPL/46 PD IEC/TR 62283:2010 Optical fibres. Guidance for nuclear radiation tests supersedes PD IEC TR 62283:2003 ISBN members, non-members GEL/86/1 PD IEC/TR :2010 Dynamic modules. Round robin measurement results for group delay ripple of tunable dispersion compensators ISBN GEL/86/3 DRAFTS FOR DEVELOPMENT DD CEN/TS Cranes. General design. Limit states and proof of competence of forged hooks ISBN members, non-members MHE/3/1 PD ISO/TR 230-8:2010 Test code for machine tools. Vibrations supersedes PD ISO/TR 230-8:2009 ISBN members, non-members MTE/1/2 PD IEC/TR :2010 Performance of high-voltage direct current (HVDC) systems with line-commutated converters. Steady-state conditions ISBN members, non-members PEL/22 DD CEN/TS 15401:2010 Solid recovered fuels. Determination of bulk density supersedes DD CEN/TS 15401:2006 ISBN members, non-members PTI/17 22 Prices may be subject to change. Update Standards Sep 2010

23 DD CEN/TS 15412:2010 Solid recovered fuels. Methods for the determination of metallic aluminium supersedes DD CEN/TS 15412:2006 ISBN members, non-members PTI/17 DD CEN/TS :2010 Solid recovered fuels. Determination of moisture content using the oven dry method. Determination of total moisture by a reference method supersedes DD CEN/TS :2006 ISBN members, non-members PTI/17 DD CEN/TS :2010 Solid recovered fuels. Determination of moisture content using the oven dry method. Determination of total moisture content by a simplified method supersedes DD CEN/TS :2006 ISBN members, non-members PTI/17 DD CEN ISO/TS 13141:2010 Electronic fee collection. Localisation augmentation communication for autonomous systems ISBN members, non-members EPL/278 DD CEN ISO/TS :2010 Electronic fee collection. Test procedures for user and fixed equipment. Description of test procedures supersedes DD CEN ISO/TS :2005 ISBN members, non-members EPL/278 DD ISO/TS 10128:2009 Graphic technology. Methods of adjustment of the colour reproduction of a printing system to match a set of characterization data ISBN members, non-members PAI/43 DD IEC/TS :2010 Adjustable speed electrical power drive systems. Specification of voltage on the power interface ISBN members, non-members PEL/22 DD IEC/TS 62579:2010 Multimedia home server systems. Conceptual model for domain management ISBN members, non-members EPL/100 EDUCATION PUBLICATIONS BIP 2200 PP 1990 Pack of 5 Structural Eurocodes: Extracts from the Structural Eurocodes for Students of Structural Design (PP 1990) supersedes BIP PP 1990:2007 Pk of members, non-members. BIP 2200 PP 1990 Single copy Structural Eurocodes: Extracts from the Structural Eurocodes for Students of Structural Design (PP 1990) supersedes BIP PP 1990:2007 Book (single copy) ISBN members, non-members. PUBLICLY AVAILABLE SPECIFICATIONS Publicly Available Specifications (formerly Product Assessment Specifications) are issued to provide an interim document where there is a market need but where a full British or European Standard has yet to be published. PAS 900:2010 Code of Practice for Wheelchair Passports ISBN members, non-members. SPECIALIST BOOKS FROM BSI BIP 2199 Concise Eurocodes. Loadings on Structures BS EN Eurocode 1 ISBN members, non-members. BIP 3092 The ISO 9000 standards collection. Quality management systems ISBN members, non-members ZBIP/5 British Standards Online at KITS, SETS, PACKS AND SERIES KIT 205 Action on structures ISBN , members, 2, non-members Special offer. Includes BS EN , NA to BS EN , BS EN , NA to BS EN , BS EN , NA to BS EN , BS EN , NA to BS EN , BS EN , NA to BS EN , BS EN , NA to BS EN , BS EN , NA to BS EN , BS EN , NA to BS EN , BS EN , NA to BS EN , BS EN and NA to BS EN KIT 206 Design of concrete structures ISBN members, non-members Special offer. Includes: BS EN , NA to BS EN , BS EN , NA to BS EN , BS EN , NA to BS EN , BS EN and NA to BS EN KIT 207 Design of steel structures ISBN , members, 3, non-members Special offer. Includes BS EN , NA to BS EN , BS EN , NA to BS EN , BS EN , NA to BS EN , BS EN , NA to BS EN , BS EN , NA to BS EN , BS EN , BS EN , BS EN , NA to BS EN , BS EN , NA to BS EN , BS EN , NA to BS EN , BS EN , NA to BS EN , BS EN , NA to BS EN , BS EN , NA to BS EN , BS EN , NA to BS EN , BS EN , BS EN , BS EN , BS EN , BS EN , NA to BS EN , BS EN and NA to BS EN KIT 208 Design on composite steel and concrete structures ISBN members, non-members Special offer. Includes BS EN , NA to BS EN , BS EN , NA to BS EN , BS EN and NA to BS EN KIT 209 Design of timber structure ISBN members, non-member Special offer. Includes BS EN , NA to BS EN , BS EN , NA to BS EN , BS EN and NA to BS EN Update Standards Sep 2010 Prices may be subject to change. 23

24 Kits, Sets, Packs and Series continued... KIT 210 Design of masonry structures ISBN members, non-members Special offer. Includes BS EN , NA to BS EN , BS EN , NA to BS EN , BS EN , NA to BS EN , BS EN and NA to BS EN KIT 211 Geotechnical design ISBN members, non-members Special offer. Includes BS EN , NA to BS EN , BS EN and NA to BS EN KIT 212 Design of structures for earthquake resistance ISBN members, 1, non-members Special offer. Includes BS EN , NA to BS EN , BS EN , NA to BS EN , BS EN , BS EN , NA to BS EN , BS EN , NA to BS EN , BS EN and NA to BS EN KIT 213 Design of aluminium structures ISBN members, 1, non-members. Special offer. Includes BS EN , NA to BS EN , BS EN , NA to BS EN , BS EN , NA to BS EN , BS EN , NA to BS EN , BS EN and NA to BS EN Help Us to Help You! Always quote your Customer Number Don t know your number? Contact Customer Services who will be happy to check it for you CORRIGENDA TO BRITISH STANDARDS Most amendments are not issued separately. Those that make significant changes to a standard are incorporated into the standard which is reissued (see Updated British Standards ). British Standards which have been corrected via corrigenda are available on request, free of charge to past purchasers of the standard. All amendments and corrigenda to date of despatch are included within any main publication when ordered for the first time. The following corrigenda to British Standards were made available last month. BS EN 1990:2002+A1:2005 Eurocode. Basis of structural design CORRIGENDUM 2 B/525/1 Also incorporates Amendment 1 and Corrigendum 1 BS EN ISO :2010 Infusion equipment for medical use. Closures for infusion bottles CORRIGENDUM 1 CH/212 BS EN ISO :October 2009 Biological evaluation of medical devices. Evaluation and testing within a risk management process CORRIGENDUM 1 CH/194 BS EN ISO :2008 Biological evaluation of medical devices. Ethylene oxide sterilization residuals CORRIGENDUM 1 CH/194 BS EN ISO :December 2009 Biological evaluation of medical devices. Framework for identification and quantification of potential degradation products CORRIGENDUM 1 CH/194 BS EN :2010 Sealants for non-structural use in joints in buildings and pedestrian walkways. Sealants for glazing CORRIGENDUM 1 B/547 BS EN :2010 Cable trunking systems and cable ducting systems for electrical installations. Particular requirements for slotted cable trunking systems intended for installation in cabinets CORRIGENDUM 1 PEL/213 BS EN :2001+A2:2005 Railway applications. Insulation coordination. Basic requirements. Clearances and creepage distances for all electrical and electronic equipment CORRIGENDUM 1 GEL/9 Also incorporates Amendments 1 and 2 BS EN :1999 Railway applications. The specification and demonstration of reliability, availability, maintainability and safety (RAMS). Basic requirements and generic process CORRIGENDUM 2 GEL/9 Also incorporates Corrigendum 1 BS EN 50129:2003 Railway applications. Communication, signalling and processing systems. Safety related electronic systems for signalling CORRIGENDUM 1 GEL/9 BS EN 50149:2001 Railway applications. Fixed installations. Electric traction. Copper and copper alloy grooved contact wires CORRIGENDUM 4 GEL/9 Also incorporates Corrigenda 1, 2 and 3 BS EN 50155:2007 Railway applications. Electronic equipment used on rolling stock CORRIGENDUM 1 GEL/9 BS EN 50367:2006 Railway applications. Current collection systems. Technical criteria for the interaction between pantograph and overhead line (to achieve free access) CORRIGENDUM 1 GEL/9 BS EN :1998+A2:2008 Luminaires. Particular requirements. Luminaires for emergency lighting CORRIGENDUM 4 CPL/34/4 Also incorporates Amendments 1 and 2 and Corrigenda 1, 2 and 3 BS EN :2007 Medical electrical equipment. General requirements for basic safety and essential performance. Collateral standard. Electromagnetic compatibility. Requirements and tests CORRIGENDUM 1 CH/62/1 BS EN :2008 Medical electrical equipment. General requirements for basic safety and essential performance. Collateral Standard. Radiation protection in diagnostic X-ray equipment CORRIGENDUM 1 CH/62/2 24 Prices may be subject to change. Update Standards Sep 2010

25 BS EN :2007 Medical electrical equipment. General requirements for basic safety and essential performance. Collateral Standard. Usability CORRIGENDUM 2 CH/62/1 Also incorporates Corrigendum 1 BS EN :2007 Medical electrical equipment. General requirements for basic safety and essential performance. Collateral Standard. General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems CORRIGENDUM 1 CH/62/1 BS EN :2010 Household and similar electrical appliances. Test code for the determination of airborne noise. General requirements CORRIGENDUM 1 CPL/59 BS EN :2008 Connectors for electronic equipment. Product requirements. Circular connectors. Detail specification for M12 connectors with screwlocking CORRIGENDUM 1 EPL/48 BS EN :1997 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital highspeed data applications. Rectangular connectors. Detail specification for a range of shielded connectors with trapezoidal shaped shells and non-removable rectangular contacts on a 1,27 mm x 2,54 mm centre-line CORRIGENDUM 1 EPL/48 BS EN 61547:2009 Equipment for general lighting purposes. EMC immunity requirements CORRIGENDUM 1 CPL/34 BS EN 62115:2005 Electric toys. Safety CORRIGENDUM 1 CPL/61/21 BS ISO 4217:2008 Codes for the representation of currencies and funds CORRIGENDUM 1 IST/12 BS ISO 6611:2004 Milk and milk products. Enumeration of colonyforming units of yeasts and/or moulds. Colonycount technique at 25 C CORRIGENDUM 1 AW/9 BS ISO/IEC :2006 Identification cards. Test methods. Cards with magnetic stripes CORRIGENDUM 1 IST/17 PD ISO/TR :2008 Rolling bearings. Explanatory notes on ISO 281. Modified rating life calculation, based on a systems approach to fatigue stresses CORRIGENDUM 1 MCE/7 UPDATED BRITISH STANDARDS The following standards have been amended and the amendments have been incorporated into an updated standard. NOTE: Updated British Standards must be reordered as the amendments are not available separately. BS 8300:2009+A1:2010 Design of buildings and their approaches to meet the needs of disabled people. Code of practice AMENDMENT members, 256 non-members B/559 This amendment was sent out free of charge to existing purchasers BS EN :2000+A1:2010 Safety of machinery. Safety requirements for the design and construction of paper-making and finishing machines. Common requirements AMENDMENT members, non-members MCE/3/9 BS EN 1678:1998+A1:2010 Food processing machinery. Vegetable cutting machines. Safety and hygiene requirements AMENDMENT members, non-members MCE/3/5 BS EN 12267:2003+A1:2010 Food processing machinery. Circular saw machines. Safety and hygiene requirements AMENDMENT members, non-members MCE/3/5 BS EN 12268:2003+A1:2010 Food processing machinery. Band saw machines. Safety and hygiene requirements AMENDMENT members, non-members MCE/3/5 BS EN 12355:2003+A1:2010 Food processing machinery. Derinding-, skinning- and membrane removal machines. Safety and hygiene requirements AMENDMENT members, non-members MCE/3/5 BS EN ISO :2006+A1:2010 Personal flotation devices. Special purpose lifejackets and buoyancy aids. Safety requirements and additional test methods AMENDMENT 1 PH/3/6 BS EN 12753:2005+A1:2010 Thermal cleaning systems for exhaust gas from surface treatment equipment. Safety requirements AMENDMENT members, non-members MCE/3/8 BS EN 12855:2003+A1:2010 Food processing machinery. Rotating bowl cutters. Safety and hygiene requirements AMENDMENT members, non-members MCE/3/5 BS EN :2005+A1:2010 Machines for surface cleaning and pretreatment of industrial items using liquids or vapours. Common safety requirements AMENDMENT members, non-members MCE/3/8 BS EN 13208:2003+A1:2010 Food processing machinery. Vegetable peelers. Safety and hygiene requirements AMENDMENT members, non-members MCE/3/5 BS EN :2006+A1:2010 Windows and doors. Product standard, performance characteristics. Windows and external pedestrian doorsets without resistance to fire and/or smoke leakage characteristics AMENDMENT members, non-members B/538 BS EN 50428:2005+A2:2009 Switches for household and similar fixed electrical installations. Collateral standard. Switches and related accessories for use in home and building electronic systems (HBES) AMENDMENT members, non-members PEL/23 Also incorporates Amendment 1 Update Standards Sep 2010 Prices may be subject to change. 25

26 Updated British Standards continued... BS EN :1996+A2:2010 Specifications for particular types of winding wires. Polyamide-imide enamelled round copper wire, class 200 AMENDMENT members, non-members GEL/55 Also incorporates Amendment 1 BS EN :1996+A2:2010 Specifications for particular types of winding wires. Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular copper wire, class 200 AMENDMENT members, non-members GEL/55 Also incorporates Amendment 1 BS EN :1997+A1:2010 Specifications for particular types of winding wires. Aromatic polyimide tape wrapped rectangular copper wire, class 240 AMENDMENT members, non-members GEL/55 BS EN :2005+A1:2008 Household and similar electrical appliances. Safety. Particular requirements for commercial electric dishwashing machines AMENDMENT members, non-members CPL/61/5 Also incorporates Corrigendum 1 and Amendment 1 BS EN :2004+A1:2005 Household and similar electrical appliances. Safety. Particular requirements for commercial dispensing appliances and vending machines AMENDMENT members, non-members CPL/61/5 Also incorporates Amendment 1 and 2 BS EN :2003+A1:2010 Insulation coordination for equipment within low-voltage systems. Use of coating, potting or moulding for protection against pollution AMENDMENT 1 GEL/109 BS EN :2003+A1:2009 Hand-held motor-operated electric tools. Safety. Particular requirements for reciprocating saws (jig and sabre saws) AMENDMENT 3 CPL/116 Also incorporates Amendments 1 and 2 BS EN :2009+A2:2010 Hand-held motor-operated electric tools. Safety. Particular requirements for planers AMENDMENT 1 CPL/116 BS EN :2009+A1:2010 Hand-held motor-operated electric tools. Safety. Particular requirements for hedge trimmers AMENDMENT 1 CPL/116 BS EN :2006+A2:2010 Electromagnetic compatibility (EMC). Testing and measurement techniques. Radiated, radiofrequency, electromagnetic field immunity test AMENDMENT members, non-members GEL/210/12 Also incorporates Amendment 1 and Corrigendum 1 BS EN 61549:2003+A2:2010 Miscellaneous lamps AMENDMENT members, non-members CPL/34/1 Also incorporates Amendment 1 BS ISO :2005+A1:2010 Tyres and rims (metric series) for agricultural tractors and machines. Service description and load ratings AMENDMENT 1 AUE/4 BS ISO/IEC :1998+A1:2010 Information technology. Security techniques. Entity authentication. Mechanisms using digital signature techniques AMENDMENT 1 and CORRIGENDUM 1 IST/33 BS ISO 11795:1997+A1:2010 Tyres and wheels. Tyres. Agricultural tractor and machine tyres. Method of measuring tyre rolling circumference for agricultural tractor drive wheels AMENDMENT members, non-members AUE/4 BS ISO :2006+A1:2010 Cutting tool data representation and exchange. Overview, fundamental principles and general information model AMENDMENT members, non-members MTE/18 Also incorporates Corrigendum 1 BS ISO/IEC :2004+A1:2010 Systems and software engineering. High-level Petri nets. Concepts, definitions and graphical notation AMENDMENT members, non-members IST/15 BS ISO/IEC 24744:2007+A1:2010 Software Engineering. Metamodel for Development Methodologies AMENDMENT members, non-members IST/15 BS IEC :2006+A1:2010 Semiconductor devices. General AMENDMENT members, non-members EPL/47 Also incorporates Corrigenda 1 and 2 BRITISH STANDARDS PROPOSED FOR CONFIRMATION It is BSI policy for every standard to be reviewed by the technical committee responsible not more than five years after publication, to establish whether it is still current and, if it is not, to identify and set in hand appropriate action. Circumstances may lead to an earlier review. Confirmation indicates the continuing currency of a standard. A note of any objections to the proposals below should be sent to Debbie Stead, Head of Committee Service Centre - Operations, BSI Head Office, 389 Chiswick High Road, London W4 4AL or via to BSUKoperations.review@bsigroup.com by 31 October, BS 90:1975 Specification for direct-acting electrical recording instruments and their accessories PEL/85 BS 115:1995 Specification for metallic resistance materials for electrical purposes GEL/55 BS 182:1972 Specification for galvanized line-wire for telephone and telegraph purposes ISE/106 BS 183:1972 Specification for general purpose galvanized steel wire strand ISE/106 BS 192-1:1996 Open-ended wrenches. Metric and unified MTE/15 BS 227:1995 Specification for H-section steel arches for use in mines MRE/1 26 Prices may be subject to change. Update Standards Sep 2010

27 BS 248:1969 Specification for light rails and fishplates for use at mines MRE/1 BS 328-4:1983 Drills and reamers. Specification for dimensions of reamers MTE/18 BS 411:1969 Specification for circular saws for woodworking and their attachment MTE/20 BS 448-2:1981 Dimensions of electronic tubes and valves. Specification for dimensions of United Kingdom electronic tubes EPL/39 BS 498:1990 Specification for rasps and engineers files MTE/15 BS 506-1:1987 Methanol for industrial use. Specification for methanol BS 506-2:1984 Methanol for industrial use. Methods of test BS 507:1985 Specification for ethanol for industrial use BS 508-1:1986 Butan-1-ol for industrial use. Specification for butan-1-ol BS 508-2:1984 Butan-1-ol for industrial use. Methods of test BS 509-1:1987 Acetone for industrial use. Specification for acetone BS 509-2:1984 Acetone for industrial use. Methods of test BS 549:1970 Specification for diacetone alcohol BS 551:1990 Specification for butyl acetate for industrial use BS 552:1970 Specification for amyl acetate BS 553:1990 Specification for ethyl acetate for industrial use BS 576-1:1988 Acetic acid for industrial use. Specification for acetic acid BS 576-2:1988 Acetic acid for industrial use. Methods of test for acetic acid BS 579:1957 Specification for diethyl ether (technical) BS 662-1:1979 Carbon disulphide for industrial use. Specification BS 662-3:1979 Carbon disulphide for industrial use. Additional methods of test BS 715:2005 Specification for metal flue boxes for gas-fired appliances not exceeding 20 kw GSE/4 BS 721-1:1963 Specification for worm gearing. Imperial units MCE/5 BS 721-2:1983 Specification for worm gearing. Metric units MCE/5 BS 787-1:1969 Specification for mining type flameproof gateend boxes. Gate-end boxes for direct-on-line motor starting (for use on 3-phase a.c. circuits up to 650 V) MRE/3 BS 787-2:1968 Specification for mining type flameproof gateend boxes. Gate-end boxes with air-break circuit-breakers (for use on 3-phase a.c. circuits up to 650 volts) MRE/3 BS 787-3:1971 Specification for mining type flameproof gateend boxes. Gate-end boxes with lighting transformers MRE/3 BS 787-4:1972 Specification for mining type flameproof gateend boxes. Gate-end boxes for drilling machines (for use on 3-phase a.c. circuits up to 650 V) MRE/3 BS 876:1995 Specification for hand hammers MTE/15 BS 949-2:1992 Screwing taps. Specification for unified ground thread taps. Manufacturing tolerances MTE/18 BS 978-1:1968 Specification for fine pitch gears. Involute spur and helical gears MCE/5 BS 978-2:1952 Specification for fine pitch gears. Cycloidal type gears MCE/5 BS 978-2:Addendum No. 1:1959 Gears for instruments and clockwork mechanisms. Cycloidal type gears. Double circular arc type gears MCE/5 BS 978-3:1952 Specification for fine pitch gears. Bevel gears MCE/5 BS 1052:1980 Specification for mild steel wire for general engineering purposes ISE/106 BS 1090:1970 Specification for flameproof hand-held electric drilling machines primarily for use in mines MRE/1 BS :1991 Packaging code. Wooden boxes, cases and crates PKW/0 BS :2004 Humidity. Guide to the measurement of humidity CPI/29 BS 1421:1995 Specification for picks, beater picks and mattocks MTE/15 BS 1429:1980 Specification for annealed round steel wire for general engineering springs ISE/106 BS 1545:1990 Specification for liquid toilet soap CII/34 BS :1986 Propan-2-ol (isopropyl alcohol) for industrial use. Specification for propan-2-ol (isopropyl alcohol) Update Standards Sep 2010 Prices may be subject to change. 27

28 British Standards Proposed for Confirmation continued... BS :1984 Propan-2-ol (isopropyl alcohol) for industrial use. Methods of test BS :1988 Machine tapers. Specification for turret sockets and reduction sleeves with tapped ends for tools with Morse taper shanks MTE/18 BS :1988 Machine tapers. Specification for extension adaptors with external 7/24 tapers for tools with Morse taper shanks MTE/18 BS :1989 Analysis of soaps. Quantitative test methods. Method for determination of free fatty acids content CII/34 BS :1990 Analysis of soaps. Quantitative test methods. Method for determination of EDTA content CII/34 BS 1813:1974 Specification for dimensions of conduit dies, diestocks and guides MTE/18 BS 1834:1968 Specification for isopropyl acetate BS 1835:1991 Specification for 2-ethylhexan-1-ol for industrial use BS 1842:1952 Specification for double-ended open-jawed spanners for B.A. hexagon sizes MTE/15 BS :1995 Tubular fluorescent lamps for general lighting service. Specification for lamps used in the United Kingdom not included in BS EN 60081, BS EN 60901, BS EN and BS EN CPL/34/1 BS 1911:1990 Specification for hard soap CII/34 BS 1912:1990 Specification for soap flakes CII/34 BS 1913:1990 Specification for soft soap CII/34 BS 1914:1990 Specification for toilet soap CII/34 BS :1993 Hacksaw blades. Specification for hand and machine hacksaw blades MTE/20 BS :1995 Hacksaw blades. Specification for cutting performance MTE/20 BS 1937:1953 Specification for engineers ratchet braces and drilling pillars MTE/15 BS 1940:1987 Specification for butanone (ethyl methyl ketone) for industrial use BS 1941:1993 Specification for 4-methylpentan-2-one (isobutyl methyl ketone) for industrial use BS 1943:1989 Specification for woodworking chisels and gouges MTE/15 BS 1978:1965 Specification for bit braces MTE/15 BS 1994:1993 Specification for dichloromethane (methylene chloride) BS 2007:1975 Specification for circular gear shaving cutters, 1 to 8 metric module, accuracy requirements MCE/5 BS 2045:1965 Preferred numbers GME/1 BS 2049:1985 Specification for paraffin lighting appliances for domestic use CW/31 BS 2054:1953 Specification for augers and auger bits MTE/15 BS 2068:1970 Specification for acetic anhydride BS 2090:1954 Specification for hook spanners, peg spanners, coupling wrenches and the related slots, holes and horns MTE/15 BS 2453:1973 Specification for steel wire for spokes ISE/106 BS 2511:1970 Methods for the determination of water (Karl Fischer method) ISE/102 BS :1954 Specification for rotary form relieved gear cutters. Diametral pitch MCE/5 BS :1977 Specification for rotary form relieved gear cutters. Metric module MCE/5 BS 2556:1973 Specification for hand and breast drills MTE/15 BS 2558:1954 Specification for tubular box spanners MTE/15 BS 2558:Supplement No. 1:1968 Metric sizes MTE/15 BS :1973 Specification for screwdrivers. Insulated screwdrivers MTE/15 BS 2559:1994 Specification for screwdrivers and screwdriver accessories MTE/15 BS 2583:1955 Specification for podger spanners MTE/15 BS 2589:1955 Specification for railway track spanners MTE/15 BS 2593:1974 Specification for rotary drill rods and tungsten carbide tipped rotary drill bits MRE/1 BS 2697:1976 Specification for rack type gear cutters, metric module MCE/5 BS 2713:1966 Specification for 2-ethoxyethanol (ethylene glycol monoethyl ether) BS 2797:1976 Specification for leathers for gas meter diaphragms 28 Prices may be subject to change. Update Standards Sep 2010

29 BS 2857:1976 Specification for nickel-iron transformer and choke laminations EPL/51 BS 2945:1995 Specification for axes and hatchets MTE/15 BS 2957:1958 Specification for fireman s axe with ash handle MTE/15 BS 2982:1992 Specification for materials and packaging of surgical scalpels with detachable blades CH/170 BS 3046:1981 Specification for adhesives for hanging flexible wallcoverings PRI/52 BS 3054:1959 Specification for fireman s axe with rubber insulated handle MTE/15 BS 3066:1995 Specification for engineers cold chisels and allied tools MTE/15 BS :1991 Pliers and nippers. General introduction MTE/15 BS :1991 Pliers and nippers. Specification for dimensions of tools not standardized by ISO MTE/15 BS 3088:1959 Specification for adjustable hand reamers with inserted blades MTE/18 BS 3101:1986 Specification for control and interlock circuits primarily associated with flameproof restrained plugs and sockets for use in coal mines MRE/3 BS 3123:1959 Specification for spring calipers and spring dividers MTE/15 BS 3138:1992 Glossary of terms used in management services MS/1 BS 3144:Addendum No. 1:1981 Sampling and physical testing of leather. Determination of resistance to bending and abrasion of heavy leather BS 3144:Addendum No. 2:1981 Sampling and physical testing of leather. Measurement of water vapour absorption BS :1999 Woodworking saws for hand use. Specification for hand saws MTE/15 BS :1993 Woodworking saws for hand use. Specification for tenon and dovetail saws MTE/15 BS 3237:1960 Specification for light and medium rolling stock for mineral haulage in mines MRE/1 BS 3300:1985 Specification for paraffin unflued space heating and cooking appliances for domestic use CW/31 This standard will become effective when the Oil Heaters (Safety) Regulations 1977 are remade. BS 3322:1981 Specification for carpenters squares and bevels MTE/15 BS :1961 Methods for the sampling and analysis of tin and tin alloys. Method for the determination of tin in ingot tin (aluminium reduction method) NFE/27 BS :1961 Methods for the sampling and analysis of tin and tin alloys. Method for the determination of antimony in ingot tin (photometric method) NFE/27 BS :1961 Methods for the sampling and analysis of tin and tin alloys. Method for the determination of copper in ingot tin and tin-lead solders (photometric method) NFE/27 BS :1961 Methods for the sampling and analysis of tin and tin alloys. Method for the determination of lead in ingot tin and tin-antimony solders (photometric method) NFE/27 BS :1961 Methods for the sampling and analysis of tin and tin alloys. Method for the determination of copper in high purity ingot tin (photometric method) NFE/27 BS :1961 Methods for the sampling and analysis of tin and tin alloys. Method for the determination of silver in solders (volumetric: ammonium thiocyanate method) NFE/27 BS :1961 Methods for the sampling and analysis of tin and tin alloys. Method for the determination of bismuth in ingot tin, tin-lead solders and white metal bearing alloys (photometric method) NFE/27 BS :1965 Methods for the sampling and analysis of tin and tin alloys. Method for the determination of arsenic in ingot tin, solders and white metal bearing alloys (photometric method) NFE/27 BS :1961 Methods for the sampling and analysis of tin and tin alloys. Method for the determination of iron in ingot tin, tin-lead solders and white metal bearing alloys (photometric method) NFE/27 BS :1961 Methods for the sampling and analysis of tin and tin alloys. Method for the determination of tin in solders (nickel coil reduction method) NFE/27 BS :1965 Methods for the sampling and analysis of tin and tin alloys. Method for the determination of antimony in solders and white metal bearing alloys (volumetric: potassium bromate method) NFE/27 BS :1965 Methods for the sampling and analysis of tin and tin alloys. Method for the sampling of white metal bearing alloy ingots NFE/27 BS :1965 Methods for the sampling and analysis of tin and tin alloys. Method for the determination of copper and lead in white metal bearing alloys (electrodeposition method) NFE/27 BS :1965 Methods for the sampling and analysis of tin and tin alloys. Method for the determination of tin in white metal bearing alloys (nickel coil reduction method) NFE/27 BS :1965 Methods for the sampling and analysis of tin and tin alloys. Method for the determination of cadmium in solders and white metal bearing alloys (photometric method) NFE/27 Update Standards Sep 2010 Prices may be subject to change. 29

30 British Standards Proposed for Confirmation continued... BS :1966 Methods for the sampling and analysis of tin and tin alloys. Method for the determination of aluminium in solders and white metal bearing alloys (photometric method) NFE/27 BS :1966 Methods for the sampling and analysis of tin and tin alloys. Method for the determination of zinc in solders and white metal bearing alloys (photometric method) NFE/27 BS :1970 Methods for the sampling and analysis of tin and tin alloys. Method for the determination of nickel in capping metal (photometric method) NFE/27 BS :1983 Methods for the sampling and analysis of tin and tin alloys. Determination of high cadmium content of soft solders NFE/27 BS 3388:2004 Forks, shovels and spades. Requirements and test methods MTE/15 BS :2000 Testing coated fabrics. Index of parts BS :1987 Testing coated fabrics. Methods 12A and 12B Determination of surface drag BS :1999 Testing coated fabrics. Guide to the selection of methods for colour fastness to light testing BS :1985 Testing coated fabrics. Method 16. Methods for determination of colour fastness to wet and dry rubbing and determination of resistance to printwear BS :1995 Testing coated fabrics. Method 18. Determination of air permeability BS :1987 Testing coated fabrics. Method 20. Method for determination of dimensional stability to water immersion BS :1986 Testing coated fabrics. Methods 21A and 21B. Methods for determination of resistance to wicking and lateral leakage BS :1989 Testing coated fabrics. Methods 22A, 22B and 22C. Determination of sulphur staining BS :1987 Testing coated fabrics. Method 23. Method for determination of dimensional changes on mechanical relaxation at zero tension BS :1993 Testing coated fabrics. Method 24. Method for determination of elongation and tension set BS :1983 Testing coated fabrics. Method 25. Methods for determination of fusion of PVC coatings and the state of cure of vulcanized rubber coatings BS :1990 Testing coated fabrics. Methods 27A and 27B. Methods for determination of abrasion resistance BS :1993 Testing coated fabrics. Method 28. Method for determination of the coating thickness and thickness of any expanded layer BS :1990 Testing coated fabrics. Methods 29A, 29B, 29C and 29D. Methods for determination of resistance to water penetration and surface wetting BS :1995 Testing coated fabrics. Method 31. Determination of specular gloss BS :1990 Testing coated fabrics. Method 34. Method for determination of resistance to scuffing and snagging BS :1992 Testing coated fabrics. Method 37. Method for determination of water vapour permeability index (WVPI) BS :1993 Testing coated fabrics. Method 39. Method for determination of the dimensional stability of coated fabrics to domestic washing BS :1998 Testing coated fabrics. Determination of wounded burst strength BS 3546:2001 Coated fabrics for use in the manufacture of water penetration resistant clothing BS 3555:1988 Specification for ring wrenches MTE/15 BS 3591:1985 Specification for industrial methylated spirits BS :1963 Specification for pipe wrenches. Stillson type wrenches MTE/15 BS :1965 Specification for pipe wrenches. Footprint type wrenches MTE/15 BS :1969 Glossary of mining terms. Planning and surveying MRE/1 BS :1971 Glossary of mining terms. Ventilation MRE/1 BS :1971 Glossary of mining terms. Boring and exploration MRE/1 BS :1971 Glossary of mining terms. Drainage MRE/1 BS :1971 Glossary of mining terms. Geology MRE/1 BS :1972 Glossary of mining terms. Drilling and blasting MRE/1 BS :1973 Glossary of mining terms. Electrical engineering and lighting MRE/1 BS :1974 Glossary of mining terms. Winning and working MRE/1 BS :1974 Glossary of mining terms. Shafts and associated equipment MRE/1 BS :1967 Glossary of mining terms. Transport MRE/1 30 Prices may be subject to change. Update Standards Sep 2010

31 BS :1967 Glossary of mining terms. Strata control MRE/1 BS 3623:1981 Specification for woodworkers metal-bodied planes MTE/15 BS 3632:2005 Residential park homes. Specification B/511 BS 3674:1981 Specification for sodium carbonate (technical grades) CII/26 BS 3693:1992 Recommendations for design of scales and indexes on analogue indicating instruments PEL/85 BS :1989 Analysis of formulated detergents. Qualitative test methods CII/34 BS :1989 Analysis of formulated detergents. Quantitative test methods CII/34 BS :1989 Analysis of formulated detergents. Quantitative test methods CII/34 BS :1985 Analysis of formulated detergents. Quantitative test methods CII/34 BS :1985 Analysis of formulated detergents. Quantitative test methods CII/34 BS :1985 Analysis of formulated detergents. Quantitative test methods CII/34 BS :1985 Analysis of formulated detergents. Quantitative test methods CII/34 BS :1989 Analysis of formulated detergents. Quantitative test methods CII/34 BS :1989 Analysis of formulated detergents. Physical test methods. CII/34 BS 3788:1984 Specification for tin coated finish on culinary utensils CW/9 BS 3823:1990 Grading of ash and hickory wood handles for hand tools MTE/15 BS 3831:1964 Specification for vitreous enamel finishes for domestic and catering appliances STI/36 BS :1990 Rope rollers, pulleys, mountings and assemblies for colliery track haulage. Specification for parallel barrel rollers, mountings and assemblies MRE/1 BS :1990 Rope rollers, pulleys, mountings and assemblies for colliery track haulage. Specification for vertical spindle pulleys, mountings and assemblies MRE/1 BS :1990 Rope rollers, pulleys, mountings and assemblies for colliery track haulage. Specification for suspended pulley assemblies and clamps MRE/1 BS 3877:1991 Specification for metal cutting bandsaw blades MTE/20 BS 3905:1995 Specification for 3.8/6.6 kv, 300 A bolted flameproof cable couplers and adaptors, for use in coal mines. MRE/3 BS 3935:1991 Guide to classification and marking of cattle hides and calfskins BS 3947:1976 Specification for liquid chlorine CII/26 BS 3984:1982 Specification for sodium silicates CII/26 BS 3993:1966 Specification for hydrochloric acid, commercial types 1 and 2 CII/26 BS 4006:1992 Specification for hand operated square drive socket wrenches and accessories MTE/15 BS 4034:1990 Specification for vitrified hotelware CW/29 BS 4073:1966 Specification for heavy rolling stock for mineral haulage in mines MRE/1 BS :1987 Powder actuated fixing systems. Code of practice for safe use MTE/21 BS :1989 Powder actuated fixing systems. Specification for tools MTE/21 BS 4087:1989 Specification for copper-covered steel wire for telephone and telegraph purposes ISE/106 BS 4102:1998 Specification for steel wire for general fencing purposes ISE/106 BS 4105:1990 Specification for liquid carbon dioxide, industrial CII/19 BS :1992 Conveyor chains, their attachments and associated chain wheels. Specification for chains and attachments (British series) MCE/1 BS 4130:1984 Specification for sodium hydroxide (technical grades) CII/26 BS :1968 Methods of measurement of the electrical properties of electronic tubes and valves (excluding microwave devices). Essential conditions for measuring equivalent input and output admittances EPL/39 BS 4341:1968 Methods of test for formic acid BS 4341:Addendum No. 1:1971 Methods of test for formic acid BS 4393:1991 Specification for solderable tin or tin-lead coated wires for component terminations NFE/27 BS 4405:1990 Specification for liquid soap CII/34 Update Standards Sep 2010 Prices may be subject to change. 31

32 British Standards Proposed for Confirmation continued... BS 4411:1969 Specification for woodcutting bandsaw blades MTE/20 BS :1969 Recommendations for the safety of powered industrial trucks. Operation and maintenance MHE/7 BS 4462:1969 Guide for the preparation of technical sales literature for measuring instruments and process control equipment CPI/704 BS 4478:1969 Methods of measurement of intermodulation products in electronic tubes or valves intended for use in colour television transposers EPL/39 BS :1970 Specification for fine pitch gears (metric module). Involute spur and helical gears MCE/5 BS :1978 Specification for fine pitch gears (metric module). Hobs and cutters MCE/5 BS 4583:1991 Methods of test for higher alcohols for industrial use BS 4633 and 4634:1970 Method for the determination of crystallizing point. Method for the determination of melting point and/or melting range ISE/102 BS 4637:1970 Specification for carbon steel wire for coiled springs (bedding and seating) ISE/106 BS 4638:1970 Specification for carbon steel wire for zigzag and square-form springs ISE/106 BS :Group 12:1990 Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to power engineering. Telecontrol terminology GEL/1 BS 4774:1972 Methods of test for chloroform for industrial use BS 4789:1972 Specification for ceramic components for use in envelopes for electronic tubes EPL/39 BS 4791:1985 Specification for calorimeter bombs LBI/22 BS 4835:1973 Methods of test for plasticizer esters CII/26 BS 4854:1972 Specification for cars for manriding in mines MRE/1 BS 4878:1973 Specification for large (vee-throated) haulage rope pulleys for mines and quarries MRE/1 BS :1992 Technical manuals. Specification for presentation of essential information IDT/2/10 BS :1993 Technical manuals. Guide to content IDT/2/10 BS :1993 Technical manuals. Guide to presentation IDT/2/10 BS 4900:1976 Specification for vitreous enamel colours for building purposes STI/36 BS 4981:1984 Specification for Mondopoint footwear sizing and marking system BS 5067:1985 Specification for flameproof transformers for use in mines MRE/3 BS 5125:1990 Specification for 50 A 650 V flameproof, restrained and bolted plugs and sockets for use in coal mines MRE/3 BS :1993 Mining type flameproof supply and control units for use on systems up to 1100 V. Specification for direct-on-line motor starters MRE/3 BS :1993 Mining type flameproof supply and control units for use on systems up to 1100 V. Specification for circuit breaker units MRE/3 BS :1993 Mining type flameproof supply and control units for use on systems up to 1100 V. Specification for air-cooled lighting transformer units MRE/3 BS :1993 Mining type flameproof supply and control units for use on systems up to 1100 V. Specification for air-cooled transformers to power drilling machines MRE/3 BS :1990 Methods of test for footwear and footwear materials. General introduction BS :1991 Methods of test for footwear and footwear materials. Adhesives. Resistance of adhesive joints to heat (creep test) BS :1991 Methods of test for footwear and footwear materials. Adhesives. Resistance of adhesive joints to peeling BS :1991 Methods of test for footwear and footwear materials. Adhesives. Preparation of test assemblies using adhesives (other than hot melt adhesives) for heat resistance (creep) and peel tests BS :1979 Methods of test for footwear and footwear materials. Adhesives. Recommended environmental storage conditions for adhesive joints prior to heat resistance or peeling tests BS :1991 Methods of test for footwear and footwear materials. Adhesives. Preparation of test assemblies using hot melt adhesives for heat resistance (creep) and peel tests BS :1981 Methods of test for footwear and footwear materials. Adhesives. Rate of bond strength development in shear of hot melt adhesives for lasting BS :1985 Methods of test for footwear and footwear materials. Adhesives. Measurement of green strength of adhesive joints BS :1991 Methods of test for footwear and footwear materials. Solings. Ross flexing method for cut growth resistance of soling materials BS :1980 Methods of test for footwear and footwear materials. Solings. The preparation of test pieces from soling materials for physical testing 32 Prices may be subject to change. Update Standards Sep 2010

33 BS :1983 Methods of test for footwear and footwear materials. Solings. Resistance of solings to shortterm contact with a hot surface BS :1991 Methods of test for footwear and footwear materials. Uppers, textiles and threads. Strength of upper materials and lining materials at right angles to stitch perforations BS :1978 Methods of test for footwear and footwear materials. Uppers, textiles and threads. Edgewise compressibility, upper materials BS :1978 Methods of test for footwear and footwear materials. Uppers, textiles and threads. The break/pipiness test BS :1991 Methods of test for footwear and footwear materials. Uppers, textiles and threads. Abrasion resistance of shoe laces BS :1991 Methods of test for footwear and footwear materials. Uppers, textiles and threads. Breaking strength of shoe laces BS :1975 Methods of test for footwear and footwear materials. Other components. Resistance to peeling of insole board BS :1990 Methods of test for footwear and footwear materials. Other components. Flexing index of fibreboard BS :1990 Methods of test for footwear and footwear materials. Other components. Tensile strength of fibreboard BS :1975 Methods of test for footwear and footwear materials. Other components. Shear strength of ribs stuck to insoles BS :1975 Methods of test for footwear and footwear materials. Other components. Resistance to peeling of ribs stuck to insoles BS :1990 Methods of test for footwear and footwear materials. Other components. Resistance of heels of ladies shoes to lateral impact BS :1990 Methods of test for footwear and footwear materials. Testing of complete footwear. Adhesion of stuck-on and moulded-on soles BS :1990 Methods of test for footwear and footwear materials. Testing of complete footwear. Degree of vulcanization of moulded-on rubber soles BS :1990 Methods of test for footwear and footwear materials. Testing of complete footwear. Resistance of complete footwear to heat BS :1978 Methods of test for footwear and footwear materials. Testing of complete footwear. Sole bond peeling strength BS :1991 Methods of test for footwear and footwear materials. Testing of complete footwear. Impact test for rigid units and shoe bottoms BS :1978 Methods of test for footwear and footwear materials. Testing of complete footwear. Fatigue test for rigid units and shoe bottoms BS :1979 Methods of test for footwear and footwear materials. Testing of complete footwear. Strength of top piece attachment to shoe heels BS :1981 Methods of test for footwear and footwear materials. Testing of complete footwear. Determination of the strength of buckle fastening assemblies BS :1980 Methods of test for footwear and footwear materials. Testing of complete footwear. Measurement of the strength of stitched seams in upper and lining materials BS :1981 Methods of test for footwear and footwear materials. Codes of practice. Code of practice for the comparative evaluation by wear trial of materials, components or constructions BS :1979 Methods of test for footwear and footwear materials. Codes of practice. Code of practice for the identification in footwear wear trials of major weaknesses in design or construction and the assessment of fitness-for-purpose BS 5164:1975 Specification for indirect-acting electrical indicating and recording instruments and their accessories PEL/85 BS 5190:1985 Specification for pipeline filters, filter bodies and filter elements for milking installations AW/32 BS :1989 Surgical instruments. Specification for instruments with pivot joints (excluding cutting instruments) CH/170 BS :1985 Surgical instruments. Specification for dissecting forceps CH/170 BS :1985 Surgical instruments. Specification for scissors, shears and other jointed cutting instruments CH/170 BS 5226:1991 Code of practice for equipment and procedures for the cleaning and disinfecting of milking machine installations AW/17 BS 5246:1976 Specification for pinion type cutters for spur gears - 1 to 8 metric module MCE/5 BS :1989 Bonding agents for use with gypsum plasters and cement. Specification for polyvinyl acetate (PVAC) emulsion bonding agents for indoor use with gypsum building plasters PRI/52 BS 5305:1984 Code of practice for cleaning and disinfecting of plant and equipment used in the dairying industry AW/17 BS 5347:1976 Specification for silicon-iron strip-wound cores for use in transformers and inductors for telecommunications and electronic equipment EPL/51 BS :1987 Methods of test for adhesives. General introduction PRI/52 Update Standards Sep 2010 Prices may be subject to change. 33

34 British Standards Proposed for Confirmation continued... BS 5350-A1:1976 Methods of test for adhesives. Adherends. Adherend preparation PRI/52 BS 5350-A2:1990 Methods of test for adhesives. Adherends. Guide to the selection of adherend materials PRI/52 BS 5416:1990 Specification for china tableware CW/29 BS 5443:1977 Recommendations for a standard layout for methods of chemical analysis by gas chromatography ISE/102 BS 5754:1987 Specification for electrical analogue and state signals for use in coal mines MRE/3 BS 5808:1991 Specification for underlays for textile floor coverings PRI/3 BS 5350-B5:1976 Methods of test for adhesives. Determination of gelation time PRI/52 BS 5350-C1:1986 Methods of test for adhesives. Adhesively bonded joints: mechanical tests. Determination of cleavage strength of adhesive bonds PRI/52 BS 5350-C6:1990 Methods of test for adhesives. Adhesively bonded joints: mechanical tests. Determination of bond strength in direct tension in sandwich panels PRI/52 BS 5350-C7:1990 Methods of test for adhesives. Adhesively bonded joints: mechanical tests. Determination of creep and resistance to sustained application of force PRI/52 BS 5350-D4:1976 Methods of test for adhesives. Adhesively bonded joints: environmental tests. Determination of staining potential PRI/52 BS 5350-E1:1976 Methods of test for adhesives. Sampling and analysis of test data. Guide to statistical analysis PRI/52 BS 5350-G3:1987 Methods of test for adhesives. Determination of ability of anaerobic adhesives to set on metal surfaces PRI/52 BS 5350-C13:1990 Methods of test for adhesives. Adhesively bonded joints: mechanical tests. Climbing drum peel test PRI/52 BS 5350-C14:1979 Methods of test for adhesives. Adhesively bonded joints: mechanical tests. 90 peel test for a rigid-to-rigid assembly PRI/52 BS 5350-C15:1990 Methods of test for adhesives. Adhesively bonded joints: mechanical tests. Determination of bond strength in compressive shear PRI/52 BS 5455:1977 Specification for polyurethane coated nylon fabric for mattress covers BS :1995 Buildings and structures for agriculture. Guide to the storage and handling of waste B/549 BS :2005 Buildings and structures for agriculture. Code of practice for design and construction of cattle buildings B/549 BS :1986 Cinematography. Common to more than one gauge. Sound. Code of Practice for the identification of systems for synchronization of unperforated audio tape with motion-picture film and videotape CPW/36 BS :1980 Cinematography. Television usage. Recommendations for the density range, contrast and colour balance of films and slides for colour television CPW/36 BS 5577:1999 Specification for table cutlery with non-metallic handles CW/17 BS 5620:1995 Specification for 200 A 1100 V flameproof restrained and bolted plugs and sockets for use in coal mines MRE/1 BS 5634:1978 Methods of test for potassium hydroxide CII/26 BS :1986 Methods of test for orthoboric acid (boric acid), diboron trioxide (boric oxide), disodium tetraborates, sodium perborates and crude sodium borates for industrial use. General introduction CII/26 BS 5708:1979 Specification for pruner shears (secateurs) MTE/15 BS 5833:1988 Scheme for labelling of footwear BS :1980 Methods for chemical analysis of rubber. EDTA titrimetric method for determination of zinc content of rubber products PRI/23 BS 5962:1980 Specifications for naphthalene (including test methods) BS :1994 Method of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of mesophase content CII/24 BS :1994 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of particle size distribution of fine coke CII/24 BS :1981 Methods of sampling and test for sodium carbonate for industrial use. General introduction CII/26 BS :1981 Methods of sampling and test for sodium carbonate for industrial use. Determination of copper content CII/26 BS :1981 Methods of sampling and test for sodium hydroxide for industrial use. General introduction CII/26 BS :1981 Methods of sampling and test for sodium hydroxide for industrial use. Determination of copper content CII/26 BS :1981 Methods of sampling and test for sodium hydroxide for industrial use. Determination of matter insoluble in water CII/26 34 Prices may be subject to change. Update Standards Sep 2010

35 BS :1981 Methods of sampling and test for sodium and potassium silicates for industrial use. General introduction CII/26 BS :1981 Methods of sampling and test for sodium and potassium silicates for industrial use. Determination of matter insoluble in water CII/26 BS :1981 Methods of sampling and test for sodium and potassium silicates for industrial use. Determination of chloride content of sodium metasilicate CII/26 BS :1981 Methods of sampling and test for sodium and potassium silicates for industrial use. Limit test for sulphate content of sodium metasilicate CII/26 BS :1990 Machine tool ball screws. Specification for ball nuts and principal dimensions of ball screws MTE/15 BS 6168:1987 Specification for non-metallic spur gears MCE/5 BS :1994 Intriniscally safe power supplies for use in coal mines. Specification for d.c. power supplies MRE/3 BS :1982 Intrinsically safe power supplies for use in coal mines. Specification for a.c. power supplies MRE/3 BS 6271:1982 Specification for miniature hacksaw blades MTE/20 BS 6353:1983 Specification for underground loudspeaker communication systems in coal mines MRE/3 BS :1989 Reagents for chemical analysis. Specifications (second series) CII/26 BS :1983 Testing of ethanol for industrial use. General introduction BS :1983 Testing of ethanol for industrial use. Method for detection of alkalinity or determination of acidity to phenolphthalein BS :1983 Testing of ethanol for industrial use. Method for determination of carbonyl compounds content present in small amounts (photometric method) BS :1983 Testing of ethanol for industrial use. Method for determination of carbonyl compounds content present in moderate amounts (titrimetric method) BS :1983 Testing of ethanol for industrial use. Method for determination of aldehydes content BS :1983 Testing of ethanol for industrial use. Method of test for miscibility with water BS :1983 Testing of ethanol for industrial use. Method for determination of methanol content [0.01% (V/V) to 0.20% (V/V)] (photometric method) BS :1983 Testing of ethanol for industrial use. Method for determination of methanol content [0.10% (V/V) to 1.50% (V/V)] (visual colorimetric method) BS :1983 Testing of ethanol for industrial use. Method for determination of esters content BS :1983 Testing of ethanol for industrial use. Method for determination of permanganate time BS 6451:1984 Specification for netting and fibre rope load restraint systems in surface transport MHE/16 BS 6453:1984 Specification for performance of leathers for garments BS :1985 Low speed digital signals for use in coal mines. Specification for optical coupling MRE/3 BS :1985 Low speed digital signals for use in coal mines. Specification for transformer coupling MRE/3 BS :1985 Low speed digital signals for use in coal mines. Specification for message protocols MRE/3 BS :1987 Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment. Specification for the outline dimensions of transformers and inductors using YEI-1 laminations EPL/51 BS :1985 Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment. Specification for the outline dimensions of transformers and inductors using the Q range of C-cores EPL/51 BS 6680:1985 Specification for flameproof equipment for diesel engines for use in coal mines and other mines susceptible to firedamp MRE/1 BS 6704:1996 Code of practice for selection, installation and maintenance of intrinsically safe electrical equipment in coal mines MRE/3 BS 6705:1987 Specification for electrical measuring instruments for use on intrinsically safe circuits in coal mines MRE/3 BS 6708:1998 Flexible cables for use at mines and quarries MRE/3 BS 6709:1986 Specification for interconnection of electrical apparatus, constructed to two or more British Standards, for use in mines susceptible to firedamp MRE/3 BS 6710:1987 Specification for dimensions of chain wheel tooth forming tools MCE/5 BS 6715:1991 Specification for chamois leather BS 6716:1986 Guide to properties and types of rubber PRI/54 BS 6750:1986 Specification for modular coordination in building B/554 Update Standards Sep 2010 Prices may be subject to change. 35

36 British Standards Proposed for Confirmation continued... BS 6756:1986 Specification for fibre rope cargo nets MHE/16 BS :1987 Leisure accommodation vehicles. Caravans. Specification for undergear AUE/8 BS 6882:1987 Guide for storage of raw solid natural and synthetic rubber PRI/50 BS :1988 Electrical installations for open-cast mines and quarries. Glossary MRE/3 BS :1988 Electrical installations for open-cast mines and quarries. General recommendations for protection against direct contact and electric shock MRE/3 BS :1988 Electrical installations for open-cast mines and quarries. Recommendations for equipment and ancillaries MRE/3 BS :1988 Electrical installations for open-cast mines and quarries. Recommendations for winning, stacking and processing machinery, pumps and low signal level and communications systems MRE/3 BS :1988 Electrical installations for open-cast mines and quarries. Recommendations for operation MRE/3 BS :1989 Total Access Communication System (T.A.C.S). Specification for performance requirements for mobile stations EPL/102 BS :1989 Total Access Communication System (T.A.C.S). Specification for performance and tests of the signalling system of mobile stations EPL/102 BS 6997:1990 Specification for elastomeric toroidal sealing rings ( O -rings) manufactured from acrylonitrile-butadiene rubbers complying with BS 6996 PRI/54 BS 7019:1989 Specification for fully screened 400 A bolted flameproof cable couplers and adaptors for use on systems up to and including 6.6 kv, primarily for use in mines MRE/3 BS :1993 Chemical tests for raw and vulcanized rubber. Butadiene rubber. Method for determination of unsaturation PRI/23 BS 7194:1990 Specification for direct-current and lowfrequency electronic measuring instruments with a digital display PEL/85 BS 7202:1989 Specification for non-incendive low voltage control/interlock and low voltage earth fault monitoring circuits for use in mines MRE/3 BS :1991 Drycleanability of leather garments. Specification for drycleanability and for appropriate care labels BS :1991 Drycleanability of leather garments. Method for assessing drycleanability BS 7383:1990 Specification for cold-pour resin-based compound for use as a filling medium in terminating cables in enclosures for voltages not exceeding 11 kv for use in coal mines MRE/3 BS 7398:1991 Specification for hand hacksaw frames MTE/15 BS 7451:1991 Specification for archival quality bookbinding leather BS :1992 Planning, design and installation of irrigation schemes. Glossary of terms AGE/30 BS :1992 Planning, design and installation of irrigation schemes. Guide for acquisition of site data AGE/30 BS :1992 Planning, design and installation of irrigation schemes. Guide to water resources AGE/30 BS :1993 Planning, design and installation of irrigation schemes. Guide for irrigation equipment AGE/30 BS :1992 Planning, design and installation of irrigation schemes. Guide for feasibility and implementation procedures AGE/30 BS 7586:1992 Specification for combination wrenches MTE/15 BS 7612:1993 Specification for non-circular steel wire for mechanical springs ISE/106 BS 7771:1994 Code of practice for pasteurization of milk on farms and in small dairies AW/17 BS 7794:1995 Specification for square-drive sockets, driving squares and accessories for power-driven socket wrenches MTE/15 BS 7874:1998 Method of test for microbiological deterioration of elastomeric seals for joints in pipework and pipelines PRI/70 BS 7924:1999 Code of practice for the repair and overhaul of certified electrical apparatus intended for use in mines susceptible to firedamp MRE/3 BS 7953:1999 Entrance flooring systems. Selection, installation and maintenance PRI/3 BS :2000 Materials used for the control of liquid spillages. Determination of water repellency or buoyancy for hydrophobic (oil sorbent) materials CII/63 BS 7986:2005 Data quality metrics for industrial measurement and control systems. Specification AMT/7 BS 8408:2005 Road traffic signs. Testing and performance of microprismatic retroreflective sheeting materials. Specification B/509/3 BS 8439:2005 Continuous handling equipment and systems. Guide to properties of powders and bulk materials MHE/9 BS :2005 Health informatics. Medical digital imaging. Profiles format. General principles IST/35 36 Prices may be subject to change. Update Standards Sep 2010

37 BS :2005 Health informatics. Medical digital imaging. Profiles format. Particular requirements for metadata profiles IST/35 BS 8449:2005 Building and construction sealants with movement accommodation factors greater than 25%. Method of test for determination of adhesion/cohesion properties at variable temperatures B/547 BS 9721:1985 Sectional specification for signal transformers of assessed quality for use in electronic equipment for capability approval EPL/51 BS 9727:1985 Sectional specification for power transformers of assessed quality for use in electronic equipment for capability approval EPL/51 BS 9733:1985 Sectional specification for pulse transformers of assessed quality for use in electronic equipment for capability approval EPL/51 BS 9734:1978 Sectional specification for pulse transformers of assessed quality for use in electronic equipment: full assessment level EPL/51 BS 9741:1986 Sectional specification for inductors of assessed quality for use in electronic equipment for capability approval EPL/51 BS 9751:1979 Blank detail specification for fixed insulated (unshielded) r. f. inductors at the full assessment level EPL/51 BS 9753:1986 Sectional specification for variable r.f. type inductors of assessed quality for use in electronic equipment for capability approval EPL/51 PD 6635:1999 Non-alloy steel rod for drawing and/or cold rolling. General purpose rod, rimmed and rimmed substitute low carbon steel rod, rod for special applications. Requirements and tests ISE/106 BS 2A 293:2005 Procurement of self-locking nuts with nonmetallic locking elements. Metric series. Specification ACE/12 BS G 257-1:1998 Design of electromagnetic hazard protection of civil aircraft. Guide to theory and threats ACE/66 BS G 257-2:1998 Design of electromagnetic hazard protection of civil aircraft. Guide to protection ACE/66 BS G 264:2005 Specification for avionic data transmission interface systems. Utilities bus ACE/6/-/9 BS 6L 16:1985 Specification for sheet and strip of 99% aluminium (temper designation H14 or H24) ACE/61/-/24 BS 6L 17:1985 Specification for sheet and strip of 99% aluminium (temper designation-o) ACE/61/-/24 BS 5L 36:1985 Specification for wire for solid, cold-forged rivets of 99.5% aluminium (not exceeding 10 mm diameter) ACE/61/-/24 BS 7L 37:1989 Specification for wire for solid cold-forged rivets of aluminium-copper-magnesium-siliconmanganese alloy (for use in the solution treated and naturally aged condition) (not exceeding 10 mm diameter) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8) (2014A) ACE/61/-/24 BS 4L 54:1986 Specification for tube of 99% aluminium (cold drawn: seamless: tested hydraulically) (not exceeding 12 mm wall thickness) ACE/61/-/24 BS 4L 56:1986 Specification for tube of aluminium-2 1 4% magnesium alloy (temper designation-o) (seamless: tested hydraulically) (not exceeding 12 mm wall thickness) ACE/61/-/24 BS 3L 63:1971 Specification for tube of aluminium-coppermangesium-silicon-manganese alloy (solution treated and precipitation treated) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8) ACE/61/-/24 BS 2L 77:1971 Specification for forging stock and forgings of aluminium-copper-magnesium-siliconmanganese alloy (solution treated and precipitation treated) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8) ACE/61/-/24 BS L 105:1971 Specification for tube of aluminium-coppermagnesium-silicon-manganese alloy (solution treated and aged at room temperature) (not exceeding 10 mm wall thickness) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8) ACE/61/-/24 BS L 114:1971 Specification for tube of aluminiummagnesium-silicon-manganese alloy (solution treated and precipitation treated) (not exceeding 10 mm wall thickness) (suitable for welding) (Mg 0.8, Si 1, Mn 0.7) ACE/61/-/24 BS L 117:1975 Specification for tube of aluminiummagnesium-silicon-copper-chromium alloy (solution treated and artificially aged: not tested hydraulically) (not exceeding 10 mm thickness) (Mg 1.0, Si 0.6, Cu 0.28, Cr 0.2) ACE/61/-/24 BS L 118:1975 Specification for tube of aluminiummagnesium-silicon-copper-chromium alloy (solution treated and artificially aged: tested hydraulically) (not exceeding 10 mm thickness) (Mg 1.0, Si 0.6, Cu 0.28, Cr 0.2) ACE/61/-/24 BS L 119:1975 Specification for ingots and castings of aluminium-copper-nickel-manganese-titaniumzirconium-cobalt-antimony alloy (solution treated and artificially aged) (Cu 5.0, Ni 1.5, Mn 0.25, Ti 0.2, Zr 0.2, Co 0.2, Sb 0.2) ACE/61/-/24 BS 2L 126:1970 Specification for ingots and castings of magnesium-cerium-zinc-zirconium alloy (precipitation treated) (rare earth metals 3.0, Zn 2.3, Zr 0.6) ACE/61/-/24 BS L 154:1977 Specification for ingots and castings of aluminium-copper-silicon alloy (solution treated and aged at room temperature) (Cu 4, Si 1) ACE/61/-/24 BS L 155:1977 Specification for ingots and castings of aluminium-copper-silicon alloy (solution treated and artificially aged) (Cu 4, Si 1) ACE/61/-/24 BS 2M 47:1990 Specification for retreading of cross ply tyres for aircraft ACE/59 BS PL 4:2005 Properties of unsaturated polyester resins for low pressure laminating of high strength fibre reinforced composites. Specification ACE/65/-/64 Update Standards Sep 2010 Prices may be subject to change. 37

38 British Standards Proposed for Confirmation continued... BS PL 5:2005 Unsaturated polyester resins for low pressure laminating of high strength fibre reinforced composites. Test methods ACE/65/-/64 BS PL 6:2005 Properties of unsaturated polyester resins for low pressure laminating of glass fibre reinforced composites. Specification ACE/65/-/64 BS PL 7:2005 Unsaturated polyester resins for low pressure laminating of glass fibre reinforced laminates. Test methods ACE/65/-/64 BS PL 8:2005 Fibrous polyamide material for use as an explosion suppressant and as a baffle material in aircraft fuel tanks. Specification ACE/65/-/64 BS PL 9:2005 Fibrous polyamide material for use as an explosion suppressant and as a baffle material in aircraft fuel tanks. Test methods ACE/65/-/64 BS AU 3:1970 Specification for clearance dimensions and fifth wheel positions for tractors and semi-trailers AUE/13 BS AU 2a:1970 Specification for dimensions of in diameter fifth wheel king pin for use with extra heavy duty semi-trailers AUE/13 BS AU 24a:1989 Specification for towing connections for trailers up to 5000 kg gross mass AUE/8 BS AU 25:1964 Specification for towing hook for use between trailers of 5-14 tons gross weight and towing vehicle AUE/13 BS AU 26:1964 Specification for towing jaw for use between trailers of 5-16 tons gross weight and towing vehicle AUE/13 BS AU 27:1964 Specification for towing hook for use between trailers of 5-35 tons gross weight and towing vehicle AUE/13 BS AU 28:1964 Specification for towing jaw for use between trailers of 5-35 tons gross weight and towing vehicle AUE/13 BS AU 29:1964 Specification for drawbar eyes and forecarriage pins for connection between trailers of 5-35 tons gross weight and towing vehicle AUE/13 BS AU 30b:1970 Specification for standard automatic roller-type coupling for semi-trailers of 7 tons to tons laden weight AUE/13 BS AU 114b:1979 Specification for strength requirements of towing brackets and coupling balls for caravans and light trailers AUE/8 BS AU 146b:1970 Specification for standard automatic roller-type coupling for semi-trailers not exceeding tons laden weight AUE/13 BS AU 181:1982 Specification for interface dimensions for demountable vehicle body systems AUE/13 BS AU 187:2000 Tow rope assemblies for towing passenger cars and light vans AUE/9 BS AU 190:1983 Specification for interface dimensions and fixing bolts for the mounting of overrun devices on delta shaped drawbars of trailers up to 2000 kg AUE/8 BS AU 200-1a:1984 Spray reducing devices for heavy goods vehicles. Specification for design of containment devices AUE/13 BS AU 200-2a:1984 Spray reducing devices for heavy goods vehicles. Specification for performance of suppression material and devices, and air/water separating material and devices AUE/13 BS AU 210-2:1994 Drawbars for caravans and light trailers. Specification for the design of aluminium drawbars and chassis AUE/8 BS AU 217-2:1989 Maximum road speed limiters for motor vehicles. Specification for system and component requirements AUE/13 BS AU 217-1a:1987 Maximum road speed limiters for motor vehicles. Specification for installed requirements AUE/13 BS AU 267:1998 Code of practice for breakaway cables and secondary couplings AUE/8 BRITISH STANDARDS REVIEWED AND CONFIRMED It is BSI policy for every standard to be reviewed by the technical committee responsible not more than five years after publication, to establish whether it is still current and, if it is not, to identify and set in hand appropriate action. Confirmation indicates the continuing currency of a standard. Where any standard in this list has been amended since publication, confirmation includes all amendments published to date. Reference to a particular amendment indicates that it is published concurrently with the confirmation. BS :2005 Code of practice for domestic butane- and propane-gas-burning installations. Installations at permanent dwellings, residential park homes and commercial premises, with installation pipework sizes not exceeding DN 25 for steel and DN 28 for corrugated stai GSE/24 BS :1990 Rubber latices. Methods of test. Determination of bound styrene content of non-reinforced styrene butadiene rubber latices PRI/50 BS :1996 Rubber latices. Methods of test. Determination of bound acrylonitrile content in nitrile latex PRI/50 BS 6630:1985 Method for identification of antidegradants in rubber and rubber products by thin layer chromatography PRI/23 BS :1996 Chemical tests for raw and vulcanized rubber. Determination of free sulfur PRI/23 BS :1995 Chemical tests for raw and vulcanized rubber. Methods for determination of copper content. Photometric method PRI/23 BS :1998 Chemical tests for raw and vulcanized rubber. Methods for determination of accelerators. Gas and thin layer chromatography PRI/23 38 Prices may be subject to change. Update Standards Sep 2010

39 BS 7659:1994 Specification for dog muzzles W/- BS EN ISO :2001 Resistance welding equipment. Electrode adaptors, male taper 1: 10. Parallel shank fixing for end-thrust electrodes WEE/29 BS EN 10184:2006 Chemical analysis of ferrous materials. Determination of phosphorus in non-alloyed steels and irons. Molybdenum blue spectrophotometric method ISE/102 BS EN 10315:2006 Routine method for analysis of high alloy steel by X-ray fluorescence spectrometry (XRF) by using a near by technique ISE/102 BS EN 10318:2005 Determination of thickness and chemical composition of zinc- and aluminium-based metallic coatings. Routine method ISE/102 BS EN ISO 18594:2007 Resistance spot-, projection- and seam-welding. Method for determining the transition resistance on aluminium and steel material WEE/29 BS EN ISO 18595:2007 Resistance welding. Spot welding of aluminium and aluminium alloys. Weldability, welding and testing WEE/29 BS EN 20693:1992 Dimensions of seam welding wheel blanks WEE/29 BS EN ISO 22829:2008 Resistance welding. Transformer-rectifier for welding guns with integrated transformers. Transformer- rectifier units operating at 1000 Hz frequency WEE/29 BS EN 28167:1992 Specification for projections for resistance welding WEE/29 BS EN 29313:1992 Specification for resistance spot welding equipment. Cooling tubes WEE/29 BS ISO :2002 Road vehicles. Ignition systems. Vocabulary MCE/9 BS ISO 6856:2005 Road vehicles. Unscreened high-voltage ignition cable assemblies. Test methods and general requirements MCE/9 BS ISO 7780:1998 (BS :1998) Rubber and rubber latices. Determination of manganese content. Sodium periodate photometric methods PRI/23 BS ISO 11565:2006 Road vehicles. Spark-plugs. Test methods and requirements MCE/9 BS ISO 12965:2000 Butadiene rubber. Determination of microstructure by infra-red spectrometry PRI/23 BS ISO 14558:2000 Rubber. Determination of residual unsaturation of hydrogenated nitrile rubber (HNBR) by infrared spectroscopy PRI/23 BS ISO 15671:2000 Rubber and rubber additives. Determination of total sulfur content using an automatic analyser PRI/50 BS ISO 15672:2000 Rubber and rubber additives. Determination of total nitrogen content using an automatic analyser PRI/23 BS ISO 18692:2007 Fibre ropes for offshore stationkeeping. Polyester TCI/77 BS ISO 19813:2006 Road vehicles. Ignition systems. Test methods and requirements for high voltage boots on plug-top coils and pencil coils MCE/9 DD ISO/PAS 11154:2006 Road vehicles. Roof load carriers AUE/9 BS AU 262-1:1995 Road vehicles. Sheath-type glow-plugs with conical seating and their cylinder head housing. M14 x 1, 25 glow-plugs MCE/9 BS AU 262-2:1995 Road vehicles. Sheath-type glow-plugs with conical seating and their cylinder head housing. M12 x 1.25 glow-plugs MCE/9 BRITISH STANDARDS PROPOSED FOR DECLARATION OF OBSOLESCENCE Declaration of obsolescence indicates that the standard is not recommended for use in new equipment, but needs to be retained for the servicing of existing equipment that is expected to have a long working life. A note of any objections to the proposals below should be sent to Debbie Stead, Head of Committee Service Centre Operations, BSI Head Office, 389 Chiswick High Road, London W4 4AL or via to BSUKoperations.review@bsigroup.com by 31 October, BS 3348:1961 Specification for antral trocars and cannulae CH/170 BS :1982 Testing coated fabrics. Methods 7A, 7B and 7C. Methods for determination of tear strength This standard has been proposed for obsolescence as sections are still used by the MoD. BS :1983 Testing coated fabrics. Methods 10A, 10B and 10C. Methods for determination of low temperature performance This standard has been proposed for obsolescence as sections are still used by the MoD. BS 3441:1995 Specification for tanks for the transport of milk and liquid milk products AW/22 BS 3504:1962 Specification for magnesium-activated nickel for cathodes of electronic tubes and valves EPL/39 BS :1966 Methods for the analysis of nickel for use in electronic tubes and valves. Determination of aluminium (photometric method) EPL/39 Update Standards Sep 2010 Prices may be subject to change. 39

40 British Standards Proposed for Obsolescence continued... BS :1968 Methods for the analysis of nickel for use in electronic tubes and valves. Determination of boron (photometric method) EPL/39 BS :1966 Methods for the analysis of nickel for use in electronic tubes and valves. Determination of carbon EPL/39 BS :1964 Methods for the analysis of nickel for use in electronic tubes and valves. Determination of chromium (photometric method) EPL/39 BS :1964 Methods for the analysis of nickel for use in electronic tubes and valves. Determination of cobalt (photometric method) EPL/39 BS :1964 Methods for the analysis of nickel for use in electronic tubes and valves. Determination of copper (photometric method) EPL/39 BS :1964 Methods for the analysis of nickel for use in electronic tubes and valves. Determination of iron (photometric method) EPL/39 BS :1964 Methods for the analysis of nickel for use in electronic tubes and valves. Determination of manganese (photometric method) EPL/39 BS :1967 Methods for the analysis of nickel for use in electronic tubes and valves. Determination of magnesium (photometric method) EPL/39 BS :1964 Methods for the analysis of nickel for use in electronic tubes and valves. Determination of silicon per cent (photometric method) EPL/39 BS :1965 Methods for the analysis of nickel for use in electronic tubes and valves. Determination of silicon per cent (photometric method) EPL/39 BS :1970 Methods for the analysis of nickel for use in electronic tubes and valves. Determination of sulphur (combustion method) EPL/39 BS :1965 Methods for the analysis of nickel for use in electronic tubes and valves. Determination of titanium (photometric method) EPL/39 BS :1964 Methods for the analysis of nickel for use in electronic tubes and valves. Determination of tungsten (gravimetric method) EPL/39 BS :1968 Methods for the analysis of nickel for use in electronic tubes and valves. Determination of zinc (photometric method) EPL/39 BS :1966 Methods for the analysis of nickel for use in electronic tubes and valves. Determination of combined and free magnesium EPL/39 BS :1966 Methods for the analysis of nickel for use in electronic tubes and valves. Spectrographic method EPL/39 BS :1966 Methods for the analysis of nickel for use in electronic tubes and valves. Determination of magnesium (atomic absorption method) EPL/39 BS 3839:1978 Specification for oxygen-free high-conductivity copper for electronic tubes and semiconductor devices EPL/39 BS :1988 Methods of test for rigid cellular materials. Methods 1 to 5 PRI/24 BS 5336:1976 Specification. Cores made of ferromagnetic oxides for use in high flux density transformers EPL/51 BS 5576:1998 Specification for fire safety features of camping tents, awnings, trailer tents and caravan awnings TCI/74 This standard has been proposed for obsolescence as areas of it have been replaced by BS EN ISO 5912:2005 Camping tents and BS ISO 10966:2005 Sports and recreational equipment. Fabrics for awnings and camping tents. Specification However, certain elements may well still be used by the military and NGO s therefore it is felt complete removal would make reference to these sections difficult for tender purposes BS 6341:1983 Specification for fabrics for camping tents TCI/74 This standard has been proposed for obsolescence as areas of it have been replaced by BS EN ISO 5912:2005 Camping tents and BS ISO 10966:2005 Sports and recreational equipment. Fabrics for awnings and camping tents. Specification However, certain elements may well still be used by the military and NGO s therefore it is felt complete removal would make reference to these sections difficult for tender purposes 40 Prices may be subject to change. Update Standards Sep 2010

41 BS 6608:1985 Specification for cattle hide leathers for upholstered furniture BS 6943:1988 Classification of shapes of electronic components for placement on printed wiring boards EPL/40X This standard has been proposed for obsolescence as it is no longer used in the electronics industry. It is intended that it be withdrawn at the next 5-year review BS :1989 Artificial sports surfaces. Methods of test. Methods for determination of ball/surface interaction PRI/57 This standard has been proposed for obsolescence as it covers 5 methods of test. (Rebound, Roll, Velocity Change, Spin and Stiffness). Of these, EN equivalents only exist for Rebound (EN 12235) and Roll (12234). The remaining tests for spin and Velocity Change remain in use and contract specifications and warranties remain which call up these procedures. There is also current interest in Test methods for ball/surface friction, notably for hockey and this standard could provide a vehicle to the development of such test methods. BS :1990 Artificial sports surfaces. Methods of test. Methods for determination of person/surface interaction PRI/57 This standard has been proposed for obsolescence as it covers 4 test methods (Traction, Sliding Distance, Slip Resistance and PeakG) Of these only 3 are currently covered by EN equivalents. There is no direct equivalent for Sliding Distance. This method features in many current contracts and warranties and still has potential use. BS :1990 Artificial sports surfaces. Methods of test. Methods for determination of durability PRI/57 This standard has been proposed for obsolescence as it covers 6 test methods (Abrasion wheel, Abrasion blades, Fatigue, Low Temp impact, Spikes, Indentation). Currently there are EN or ISO equivalents for Abrasion, Spikes and Indentation. The existing EN methods have attracted criticism and are due for review. It would be premature to withdraw this standard. BS :1991 Artificial sports surfaces. Methods of test. Miscellaneous PRI/57 This standard has been proposed for obsolescence as it covers 4 test methods (Colour transfer, Seam Strength tension, Seam strength peel and Infiltration). EN equivalents exist for 3 of these methods, but not for Colour Transfer. This test remains in use and the standard should not be withdrawn until an EN equivalent is published. BS 9030:1971 Specification for magnetrons of assessed quality: generic data and methods of test EPL/39 BS 9031:1971 Rules for the preparation of detail specifications for pulsed fixed-frequency magnetrons of assessed quality EPL/39 BS 9032:1975 Rules for the preparation of detail specifications for pulsed magnetrons (excluding frequencyagile magnetrons) of assessed quality. Basic assessment level EPL/39 BS 9040:1978 Specification for gas-filled microwave switching tubes of assessed quality: generic data and methods of test EPL/39 BS 9041:1978 Rules for the preparation of detail specifications for gas filled microwave switching tubes of assessed quality: tunable and broadband TR tubes and TR limiters. Full assessment level EPL/39 BS 9050:1971 Specification for cathode ray tubes of assessed quality: generic data and methods of test EPL/39 BS 9054:1971 Rules for the preparation of detail specifications for radar display cathode ray tubes of assessed quality EPL/39 British Standards Online at BS 9612 N004:1977 Detail specification for cold welded seal quartz crystal units for oscillator applications. DN, 47 U/2, DQ and DP enclosures, 0.8 to 20 MHz and 3.0 to 30 MHz frequency ranges. Fundamental thickness-shear mode, AT-cut, for operation over wide temperature ranges (nontemperature controlled). Full assessment level EPL/49 BS 9612 N005:1977 Detail specification for cold welded seal quartz crystal units for oscillator applications. DN, DQ and DP enclosures, 0.8 to 20 MHz and 3.0 to 30 MHz frequency ranges. Fundamental thickness-shear mode, AT-cut, for operation over narrow temperature ranges (temperature controlled). Full assessment level EPL/49 BS 9612 N006:1977 Detail specification for cold welded seal quartz crystal units for oscillator applications. DN, 47 U/2, DQ and DP enclosures, 17 to 75 MHz frequency range. Third overtone thickness-shear mode, AT-cut, for operation over wide temperature ranges (non-temperature controlled). Full assessment level EPL/49 BS 9612 N008:1977 Detail specification for cold welded seal quartz crystal units for oscillator applications. DN, DQ and DP enclosures, 50 to 125 MHz frequency range. Fifth overtone thickness-shear mode, AT-cut, for operation over wide temperature ranges (non-temperature controlled). Full assessment level EPL/49 BS 9612 N009:1977 Detail specification for cold welded seal quartz crystal units for oscillator applications. DN, DQ and DP enclosures, 50 to 125 MHz frequency range. Fifth overtone thickness-shear mode, AT-cut, for operation over narrow temperature ranges (temperature controlled). Full assessment level EPL/49 BS 9612 N010:1979 Detail specification for cold welded seal quartz crystal units for oscillator applications. DK enclosure, 6.0 to 25 MHz frequency range. Fundamental thickness-shear mode, AT-cut, for operation over wide temperature ranges (nontemperature controlled). Full assessment level EPL/49 Update Standards Sep 2010 Prices may be subject to change. 41

42 British Standards Proposed for Obsolescence continued... BS 9612 N016:1979 Detail specification for resistance welded seal quartz crystal units for oscillator applications. DN, DZ, DQ and DP enclosures, 0. 8 to 20 MHz and 3.0 to 30 MHz frequency ranges. Fundamental thickness-shear mode, AT-cut, for operation over wide temperature ranges (nontemperature controlled). Full assessment level EPL/49 BS 9612 N017:1979 Detail specification for resistance welded seal quartz crystal units for oscillator applications. DN, DZ, DQ and DP enclosures, 0. 8 to 20 MHz and 3.0 to 30 MHz frequency ranges. Fundamental thickness-shear mode, AT-cut, for operation over narrow temperature ranges (temperature controlled). Full assessment level EPL/49 BS 9612 N018:1979 Detail specification for resistance welded seal quartz crystal units for oscillator applications. DN, DZ, DQ and DP enclosures, 17 to 75 MHz frequency range. Third overtone thickness-shear mode, AT-cut, for operation over wide temperature ranges (non-temperature controlled). Full assessment level EPL/49 BS 9612 N019:1979 Detail specification for resistance welded seal quartz crystal units for oscillator applications. DN, DZ, DQ and DP enclosures, 17 to 75 MHz frequency range. Third overtone thickness-shear mode, AT-cut, for operation over narrow temperature ranges (temperature controlled). Full assessment level EPL/49 BS 9612 N020:1979 Detail specification for resistance welded seal quartz crystal units for oscillator applications. DN, DZ, DQ and DP enclosures, 50 to 125 MHz frequency range. Fifth overtone thickness-shear mode, AT-cut, for operation over wide temperature ranges (non-temperature controlled). Full assessment level EPL/49 BS 9617:1982 Rules for the preparation of detail specifications for quartz crystal units of assessed quality. Full assessment level EPL/49 BS 9625:1983 Blank detail specification for quartz crystal oscillators of assessed quality: full assessment level EPL/49 BS 9720:1989 Specification for custom-built transformers and inductors of assessed quality: generic data and methods of test EPL/51 PD :1999 Vehicle restraint systems. Fundamentals. Database B/509/1 This standard has been proposed for obsolescence as it is no longer PD :1999 Vehicle restraint systems. Fundamentals of highway restraint systems B/509/1 This standard has been proposed for obsolescence as it is no longer PD :1999 Vehicle restraint systems. Development of vehicle highway barriers in the United Kingdom B/509/1 This standard has been proposed for obsolescence as it is no longer PD :1999 Vehicle restraint systems. Development of bridge parapets in the United Kingdom B/509/1 This standard has been proposed for obsolescence as it is no longer PD :1999 Vehicle restraint systems. Development of barrier transitions and terminals B/509/1 This standard has been proposed for obsolescence as it is no longer PD :1999 Vehicle restraint systems. Crashworthy roadside features. Impact attenuators B/509/1 This standard has been proposed for obsolescence as it is no longer BS SP 55 and SP 56:1953 Specifications for double coil spring washers for aircraft ACE/12 BS AU 141a:1971 Specification for the performance of diesel engines for road vehicles MCE/22 BRITISH STANDARDS DECLARED OBSOLESCENT Declaration of obsolescence indicates that the standard is not recommended for use in new equipment but needs to be retained for the servicing of existing equipment that is expected to have a long working life. BS 999:1962 Schedule of tests for coke ovens This standard has been declared obsolescent as the technical committee that prepared this standard has been disbanded, so the standard cannot be maintained E/- BS :1968 Glossary of terms relating to solid fuel burning equipment. Industrial water heating and steam raising installations E/- This standard has been declared obsolescent as the technical committee that prepared this standard has been disbanded, so the standard cannot be maintained BS 3455:1973 Glossary of terms used in nuclear science and technology NCE/2 This standard has been declared obsolescent as the techniques are old but it is considered that there still is still a small level of use BS 3664:1963 Specification for film badges for personnel radiation monitoring NCE/2 This standard has been declared obsolescent as the techniques are old but it is considered that there still is still a small level of use BS 3775:1964 Specification for counting trays (planchets) for radioactive assay NCE/2 This standard has been declared obsolescent as the techniques are old but it is considered that there still is still a small level of use BS 3890:1965 General recommendations for the testing, calibration and processing of radiation monitoring films NCE/2 This standard has been declared obsolescent as the techniques are old but it is considered that there still is still a small level of use 42 Prices may be subject to change. Update Standards Sep 2010

43 BS :1981 Surface materials for use in radioactive areas. Methods of measuring and evaluating the decontamination factor NCE/2 This standard has been declared obsolescent as the techniques are old but it is considered that there still is still a small level of use BS :1982 Surface materials for use in radioactive areas. Guide to the selection of materials NCE/2 This standard has been declared obsolescent as the techniques are old but it is considered that there still is still a small level of use BRITISH STANDARDS PROPOSED FOR WITHDRAWAL A note of any objections to these withdrawals should be sent to Debbie Stead, Head of Committee Service Centre - Operations, BSI Head Office, 389 Chiswick High Road, London W4 4AL or via to BSUKoperations.review@bsigroup.com by 31 October, Where any standard in this list has been amended since publication, a proposal to withdraw also includes all amendments published to date. BS 691:1987 Specification for sub-normal range ovulation and dual-scale clinical maximum thermometers (mercury-in-glass, solid stem) LBI/36/3 This standard has been proposed for withdrawal as it was part of this year s BS reviews with the default proposal of withdrawal. The standard was circulated to the BSI committee for comment but there have been no replies so the default proposal stands. BS 691: 1987 has been Superseded by BS EN :2000+A1:2009 and partially Superseded by BS EN :2000+A1:2009 BS 1309:1974 Methods of sampling and chemical testing of leather This standard has been proposed for withdrawal as it is no longer. It is partially superseded by BS EN 12748:1999, BS EN ISO 2418:2002, BS EN ISO 4044:1998, BS EN ISO 4045:1998, BS EN ISO 4047:1998, BS EN ISO 4048:1998 and BS EN ISO 5399:1998 BS 3144:1968 Methods of sampling and physical testing of leather This standard has been proposed for withdrawal as it is no longer. It is partially superseded by BS EN ISO 2417:2002, BS EN ISO 2418:2002, BS EN ISO 2419:2002, BS EN ISO 2420:2002, BS EN ISO 2589:2002, BS EN ISO :2002, BS EN ISO 3378:2002, BS EN ISO 3380:2002, BS EN ISO 3376:2002, BS EN ISO 5402:2002, BS EN ISO 5403:2002, BS EN ISO 5404:2002 and BS EN ISO 14268:2002 BS :1989 Methods of test for flexible cellular materials. Method 10. Determination of solvent swelling PRI/24 This standard has been proposed for withdrawal it was partially superseded by BS EN ISO 2440:2000+A1:2010. The clauses which remained current are no longer considered BS :Group 01:1983 Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms common to power, telecommunications and electronics. Fundamental terminology GEL/1 This standard has been proposed for withdrawal as it was partially superseded by BS IEC 60050(101):1998, BS IEC 60050(111): 1996 and BS IEC 60050(121):1998. The clauses which remained current are no longer and are now proposed for withdrawal BS 4997:1991 Specification for wooden axilla crutches CH/173 This standard has been proposed for withdrawal as it was partially superseded by BS EN 1985:1999. The clauses which remained current are no longer BS 5181:1975 Specification for wooden walking sticks CH/173 This standard has been proposed for withdrawal as it was partially superseded by BS EN 1985:1999. The clauses which remained current are no longer BS 5293:1976 Methods for sampling and testing carbon black for use in the rubber industry PRI/50 This standard has been proposed for withdrawal. It was partially superseded by Parts of the new edition, and Superseded by: BS :1988, ISO 1304:1985, BS 5293:Part 2:1990, ISO 1306:1987, BS 5293:Part 3:1990, ISO 1435:1988, BS :1990, ISO 6209:1988, BS :1991, ISO :1990, BS :1991, ISO :1990, BS :1991, ISO 1125:1990, BS 5293:Part 6:1988, ISO , BS 5293:Part 17:1988, ISO 4656/ and BS 5293:Part 5:1988, ISO The clauses which remained current are no longer considered and are now proposed for withdrawal BS 6985:1989 Specification for dual-scale and ovulation clinical maximum thermometers (mercury-inglass, enclosed scale) LBI/36/3 This standard has been proposed for withdrawal as it was part of this year s BS reviews with the default proposal of withdrawal. The standard was circulated to the BSI committee for comment but there have been no replies so the default proposal stands. BS 6985: 1989 has been Superseded by BS EN :2000+A1:2009 and partially Superseded by BS EN :2000+A1:2009 BS :1989 Artificial sports surfaces. Methods of test. Methods for determination of environmental resistance PRI/57 This standard has been proposed for withdrawal as it is no longer. It is partially Superseded by BS EN 14836:2005 BS 7957:2000 Vitreous enamel systems. Determination of selfcleaning properties STI/36 This standard has been proposed for withdrawal as the International Standard ISO 8291:1986 has been withdrawn BS 9150:1983 Specification for electrical relays of assessed quality: generic data and methods of test EPL/94 This standard has been proposed for withdrawal as it was circulated to the BSI committee. It has been superseded by BS EN :1996 and BS EN :1996 To order visit BS 5205:1990 Specification for adjustable metal walking sticks CH/173 This standard has been proposed for withdrawal as it was partially superseded by BS EN 5205:1990. The clauses which remained current are no longer BS 9151:1972 Rules for the preparation of detail specifications for all-or-nothing electromechanical relays of assessed quality. Full and basic assessment levels EPL/94 This standard has been proposed for withdrawal as it was circulated to the BSI committee. It is superseded by BS EN : 1996, BS EN :1996 and BS EN :1996 Update Standards Sep 2010 Prices may be subject to change. 43

44 British Standards Proposed for Withdrawal continued... PD :1980 General metrology. Vocabulary of legal metrology (VLM) SS/7 This standard has been proposed for withdrawal as it reproduces verbatim the International Vocabulary of Terms used in Legal Metrology (VIML) published by the International Organization of Legal Metrology (OMIL). The OIML has published later editions of the VIML but PD :1980 has not been revised inline with the OIML documents. The latest edition of the VIML was published in 2000 and is available to download free of charge from the OIML web site. Consequently, the responsible BSI Technical Committee has decided to withdraw PD :1980 without replacement An on-line copy of the 2000 edition of the VIML can be found on the OIML web site at URL: BRITISH STANDARDS WITHDRAWN If any standard in this list has been amended since publication, all amendments published to date are also withdrawn BS 770-6:1984 Methods for chemical analysis of cheese. Determination of total phosphorus content. Molecular absorption spectrometric method AW/5 Superseded by BS ISO 2962:2010 BS :1959 Lubricating nipples. Lubricating nipples and adaptors for use on machinery and vehicles E/- This standard has been withdrawn as the technical committee that prepared this standard has now been disbanded, therefore the standard cannot be maintained BS :1961 Lubricating nipples. Heavy duty lubricating nipples E/- This standard has been withdrawn as the technical committee that prepared this standard has now been disbanded, therefore the standard cannot be maintained BS :1981 Lubricating nipples. Specification for hydraulic grease nipples E/- This standard has been withdrawn as the technical committee that prepared this standard has now been disbanded, therefore the standard cannot be maintained BS 1629:1989 Recommendation for references to published materials IDT/2/2 Superseded by BS ISO 690:2010 BS :1982 Methods for analysis of dried milk and dried milk products. Determination of the titratable acidity of dried milk. Reference method AW/5 Superseded by BS ISO 6091:2010 BS 1797:1987 Schedule for tables for use in the calibration of volumetric glassware LBI/36 Superseded by BS EN ISO 4787:2010 BS 2997:1958 Specification for aluminium rainwater goods B/505 Superseded by BS 8530:2010 BS Q:2002 Measurement of liquid flow in open channels. Guidelines for safe working practice in river flow measurement CPI/113/1 This standard is withdrawn as it is no longer and will not be revised BS :1989 Bitumens for building and civil engineering. Specification for bitumens for industrial purposes B/510 This standard has been withdrawn as it is believed there are very few users and it is no longer BS :1986 Microbiological examination for dairy purposes. Methods for detection and/or enumeration of specific groups of microorganisms. Enumeration of yeasts and moulds AW/9 Superseded by BS ISO 6611:2004 BS 4445:1969 Schedule of tests for gasification and reforming plants using hydrocarbon feedstocks E/- This standard has been withdrawn as the technical committee that prepared this standard has now been disbanded, therefore the standard cannot be maintained BS :1994 Radio interference characteristics of overhead power lines and high-voltage equipment. Description of phenomena GEL/210/11 Superseded by PD CISPR/TR 18-1:2010 BS :1994 Radio interference characteristics of overhead power lines and high-voltage equipment. Methods of measurement and procedure for determining limits GEL/210/11 Superseded by PD CISPR/TR 18-2:2010 BS :1994 Radio interference characteristics of overhead power lines and high-voltage equipment. Code of practice for minimizing the generation of radio noise GEL/210/11 Superseded by PD CISPR/TR 18-3:2010 BS 5751:1987 Specification for dimensions of housings for hydraulic seals for reciprocating applications MCE/11 Superseded by BS ISO 5597:2010 BS :1982 Caseins and caseinates. Method for determination of ph (reference method) AW/5 Superseded by BS ISO 5546:2010 BS 6310:1982 Specification for occluded-ear simulator for the measurement of earphones coupled to the ear by ear inserts EPL/29 Superseded by BS EN :2010 BS 6389:1983 Methods for determination of operator s field of vision for agricultural tractors AGE/6 Superseded by BS ISO 5721:19896 BS :1985 Trace elements in milk and milk products. Method for the determination of iron content (reference method) AW/5 Superseded by BS ISO 6732:2010 BS 6696:1986 Methods for use and testing of capacity of volumetric glassware LBI/36 Superseded by BS EN ISO 4787:2010 BS :1990 Safety of earth-moving machinery. Sound test method for machine-mounted forward and reverse warning alarm B/513/1 Superseded by BS ISO 9533:2010 BS 7132:1989 Nomenclature for glass bulb designation system for lamps CPL/34/1 Superseded by PD IEC/TR 60887:2010 BS :1997 Fracture mechanics toughness tests. Method for determination of KIc, critical CTOD and critical J values of welds in metallic materials ISE/NFE/4/4 Superseded by BS EN ISO 15653:2010 DD 264:2007 Packaging. Braille and other formats for medicinal products PKW/0 Superseded by BS EN 15823: Prices may be subject to change. Update Standards Sep 2010

45 DD CEN/TS :2003 Advanced technical ceramics. Test methods for determination of fracture toughness of monolithic ceramics. Chevron notched beam (CNB) method RPI/13 Superseded by BS EN :2010 BS EN 3-6:1996 Portable fire extinguishers. Provisions for the attestation of conformity of portable fire extinguishers in accordance with EN 3 Part 1 to Part 5 FSH/2 Superseded by BS EN 3-10:2009 BS EN :2001 Aluminium and aluminium alloys. Anodizing. Method for specifying decorative and protective anodic oxidation coatings on aluminium STI/32 Superseded by BS EN ISO 7599:2010 BS EN :1999 Aluminium and aluminium alloys. Anodizing. Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution without prior acid treatment STI/32 Superseded by BS EN ISO 3210:2010 BS EN :2002 Aluminium and aluminium alloys. Anodizing. Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution with prior acid treatment STI/32 Superseded by BS EN ISO 3210:2010 BS EN 13152:2002 Specification and testing of LPG cylinder valves. Self closing PVE/19 Superseded by BS EN ISO 14245:2010 BS EN 13153:2002 Specification and testing of LPG cylinder valves. Manually operated PVE/19 Superseded by BS EN ISO 15995:2010 BS EN 55012:2002 Vehicles, boats and internal combustion engine driven devices. Radio disturbance characteristics. Limits and methods of measurement for the protection of receivers except those installed in the vehicle/boat/device itself or in adjacent vehicles/boats/devi GEL/210/11 Superseded by BS EN 55012:2007+A1:2009 BS EN :1992 Automatic electrical controls for household and similar use. Particular requirements for thermal protectors for ballasts for tubular fluorescent lamps CPL/72 Superseded by BS EN :2007 BS EN :1993 Specification for automatic electrical controls for household and similar use. Particular requirements. Thermal motor protectors for motor-compressors of hermetic and semihermetic type CPL/72 Superseded by BS EN :2007 BS EN :1995 Specification for automatic electrical controls for household and similar use. Particular requirements. Motor starting relays CPL/72 Superseded by BS EN :2007 BS ISO 690-2:1997 Information and documentation. Bibliographic references. Electronic documents or parts thereof IDT/2/2 Superseded by BS ISO 690:2010 BS ISO 5631:2000 Paper and board. Determination of colour (C/2 ). Diffuse reflectance method PAI/11 Superseded by BS ISO :2009 BS ISO/IEC :2006+A1:2009 Information technology. Implementation and operation of customer premises cabling. Testing of optical fibre cabling TCT/7 This standard is withdrawn with immediate effect as the content is largely covered by BS EN Details of the reasoning behind this decision can be obtained by contacting TCT/7 Secretary Mr Asghar Ashrafi, asghar.ashrafi@bsigroup.com. DD IEC/PAS 62591:2009 Industrial communication networks. Fieldbus specifications. WirelessHART communication network and communication profile AMT/7 Superseded by BS EN 62591:2010 BS QC :1992 Harmonized system of quality assessment for electronic components. Fixed film resistor networks for use in electronic equipment. Generic specification EPL/40X This standard has been withdrawn as it is the UK implementation of IEC :1991. It is withdrawn in line with the replacement of IEC :1991 by IEC :2008, which at this time has not been adopted by CENELEC or implemented in the UK BS QC :1992 Harmonized system of quality assessment for electronic components. Fixed film resistor networks for use in electronic equipment. Sectional specification for film resistor networks of assessed quality on the basis of the capability approval procedure EPL/40X This standard has been withdrawn as it is the UK implementation of IEC :1991. It is withdrawn in line with the replacement of IEC :1991 by IEC :2008, which at this time has not been adopted by CENELEC or implemented in the UK BS QC :1992 Fixed film resistor networks for use in electronic equipment. Blank detail specification for film resistor networks of assessed quality on the basis of the capability approval procedure. Assessment level E EPL/40X This standard has been withdrawn as it is the UK implementation of IEC :1991. It is withdrawn in line with the replacement of IEC :1991 by IEC :2008, which at this time has not been adopted by CENELEC or implemented Help Us to Help You! BS EN :1993 ISO system of limits and fits. ISO system of limits and fits. Tables of standard tolerance grades and limit deviations for holes and shafts TDW/4 Superseded by BS EN ISO 286-2:2010 BS EN 50242:1999 Electric dishwashers for household use. Test methods for measuring the performance CPL/59/1 Superseded by the dual numbered standard BS EN 50242:2008, BS EN 60436:2008 BS IEC 61713:2000 Software dependabilty through the software life-cycle processes. Application guide DS/1 Superseded by BS EN :2009 DD IEC/PAS :2007 Connectors for electronic equipment. Product requirements. Circular connectors. Detail specification for circular hybrid connectors M12 with electrical and fibre-optic contacts with screw-locking EPL/48 Superseded by BS EN :2010 Always quote your Customer Number Don t know your number? Contact Customer Services who will be happy to check it for you Update Standards Sep 2010 Prices may be subject to change. 45

46 British Standards Under Review BRITISH STANDARDS UNDER REVIEW The following British Standards implement International and/or European Standards which are currently under review to see if they should be confirmed, revised or withdrawn. Comments are welcome and should be sent to Debbie Stead, Head of Committee Service Centre - Operations, BSI Head Office, 389 Chiswick High Road, London W4 4AL or via to BSUKoperations.review@bsigroup.com by 31 October, 2010, in order to be considered by the UK Committee. BS :1977 Specification for mosaic parquet panels. General characteristics B/543 BS :1991 Methods of test for cereals and pulses. Measurement of temperature of grain during bulk storage AW/4 BS :1988 Woodworking machines. Specification for single spindle boring machines MTE/23 BS :1988 Woodworking machines. Specification for slot mortising machines MTE/23 BS :1988 Woodworking machines. Specification for two-, three- and four-side moulding machines MTE/23 BS :1988 Woodworking machines. Specification for veneer pack edge shears MTE/23 BS :1988 Woodworking machines. Specification for single chain mortising machines MTE/23 BS :1989 Woodworking machines. Specification for turning lathes MTE/23 BS :1983 Tubes for fluid power cylinder barrels. Specification for non-ferrous metallic tubes with specially finished bores MCE/18 BS :1992 Reciprocating internal combustion engines. Performance. Specification for overspeed protection MCE/14 BS :1986 Methods of test for coffee and coffee products. Green coffee: determination of proportion of insect-damaged beans AW/15 BS :1995 Methods of test for coffee and coffee products. Roasted ground coffee. Determination of moisture content (loss in mass at 103 C (routine method) AW/15 BS :1997 Methods of test for coffee and coffee products. Instant coffee: determination of free and total carbohydrate contents by high performance anion-exchange chromatography AW/15 BS :1996 Methods of test for coffee and coffee products. Green and roasted coffee. Determination of free-flow bulk density of whole beans (routine method) AW/15 BS :1996 Building setting out and measurement. Checklists for the procurement of surveys and measurement services B/554 BS :1991 Cycles. Glossary of terms GME/25 BS :2001 Sampling tobacco and tobacco products. Method of sampling batches of raw material (general principles) AW/40 BS :2001 Storage of cereals and pulses. Practical recommendations AW/4 BS :1990 Storage of cereals and pulses. Guide to control of attack by pests AW/4 BS :1996 Reciprocating internal combustion engine driven alternating current generating sets. Technical declarations for specification and design MCE/14 BS :1996 Reciprocating internal combustion engine driven alternating current generating sets. Requirements and tests for low-power generating sets MCE/14 BS :1996 Reciprocating internal combustion engine driven alternating current generating sets. Measurement and evaluation of mechanical vibrations MCE/14 BS EN ISO 105-X18:2007 Textiles. Tests for colour fastness. Assessment of the potential to phenolic yellowing of materials TCI/81 BS EN 234:1997 Wallcoverings in roll form. Specification for wallcoverings for subsequent decoration CW/35 BS EN 235:2002 Wallcoverings. Vocabulary and symbols CW/35 BS EN 259-1:2001 Wallcoverings in roll form. Heavy duty wallcoverings. Specifications CW/35 BS EN 259-2:2001 Wallcoverings in roll form. Heavy duty wallcoverings. Determination of impact resistance CW/35 BS EN ISO :2007 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids. Determination of the resistance to internal pressure. Preparation of components PRI/88/4 BS EN ISO :2007 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids. Determination of the resistance to internal pressure. Preparation of assemblies PRI/88/4 BS :2001 Methods for chemical analysis of tobacco and tobacco products. Determination of organochlorine pesticide residues (gas chromatographic method) AW/40 BS :2000 Full-flow lubricating oil filters for internal combustion engines. Filtration efficiency using particle counting, and contaminant retention capacity MCE/21/5 BS EN ISO :2008 Connections for general use and fluid power. Ports and stud ends with ISO threads with elastomeric or metal-to-metal sealing. Threaded ports MCE/18/-/4 46 Prices may be subject to change. Update Standards Sep 2010

47 BS EN ISO :2008 Connections for general use and fluid power. Ports and stud ends with ISO threads with elastomeric or metal-to-metal sealing. Heavyduty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) MCE/18/-/4 BS EN ISO :2008 Connections for general use and fluid power. Ports and stud ends with ISO threads with elastomeric or metal-to-metal sealing. Lightduty (L series) stud ends with sealing by O-ring with retaining ring (types G and H) MCE/18/-/4 BS EN ISO :2008 Connections for general use and fluid power. Ports and stud ends with ISO threads with elastomeric or metal-to-metal sealing. Stud ends for general use only with metal-to-metal sealing (type B) MCE/18/-/4 BS EN ISO 1893:2008 Refractory products. Determination of refractoriness under load. Differential method with rising temperature RPI/1 BS EN 1953:1998+A1:2009 Atomizing and spraying equipment for coating materials. Safety requirements MCE/3/8 BS EN ISO 3497:2001 Metallic coatings. Measurement of coating thickness. X-ray spectrometric methods STI/33 BS EN ISO 3543:2001 Metallic and non-metallic coatings. Measurement of thickness. Beta backscatter method STI/33 BS EN ISO 3892:2001 Conversion coatings on metallic materials. Determination of coating mass per unit area. Gravimetric methods STI/33 BS EN ISO 3954:2007 Powders for powder metallurgical purposes. Sampling ISE/65 BS EN ISO 4507:2007 Sintered ferrous materials, carburized or carbonitrided. Determination and verification of case-hardening depth by a micro-hardness test ISE/65 BS EN ISO :2007 Leather. Chemical determination of chromic oxide content. Quantification by atomic absorption spectrometry BS EN ISO :2007 Leather. Chemical determination of chromic oxide content. Quantification by inductive coupled plasma-optical emission spectrometer (ICP-OES) BS EN ISO 5529:2010 Wheat. Determination of the sedimentation index. Zeleny test AW/4 BS EN ISO :2007 Rice. Determination of amylose content. Reference method AW/4 BS EN ISO :2007 Rice. Determination of amylose content. Routine methods AW/4 BS EN ISO :2001 (BS :1991) Surgical instruments. Metallic materials. Stainless steel CH/170 BS EN ISO :2007 Metallic tube connections for fluid power and general use. 24 degree cone connectors MCE/18/-/4 BS EN ISO :2001 Materials and articles in contact with foodstuffs. Cutlery and table holloware. Lightly silver plated table holloware protected by laquer CW/17 BS EN ISO :2001 Materials and articles in contact with foodstuffs. Cutlery and table holloware. Requirements for table cutlery made of silver, other precious metals and their alloys CW/17 BS EN ISO :2001 Materials and articles in contact with foodstuffs. Cutlery and table holloware. Requirements for silver table and decorative holloware CW/17 BS EN ISO 9626:1995 Stainless steel needle tubing for the manufacture of medical devices CH/84 BS EN ISO 9969:2007 Thermoplastics pipes. Determination of ring stiffness PRI/88/4 BS EN ISO 10111:2002 Metallic and other inorganic coatings. Measurement of mass per unit area. Review of gravimetric and chemical analysis methods STI/33 BS EN ISO :2007 Petroleum, petrochemical and natural gas industries. Rotary-type positive-displacement compressors. Process compressors MCE/8 BS EN ISO 10528:1995 Textiles. Commercial laundering procedure for textile fabrics prior to flammability testing TCI/82 BS EN ISO 11970:2007 Specification and approval of welding procedures for production welding of steel castings ISE/111 BS EN 12781:2001 Wallcoverings. Specification for cork panels CW/35 BS EN 13085:2001 Wallcoverings. Specification for cork rolls CW/35 BS EN ISO 13478:2007 Thermoplastics pipes for the conveyance of fluids. Determination of resistance to rapid crack propagation (RCP). Full-scale test (FST) PRI/88/4 BS EN ISO 15620:2000 Welding. Friction welding of metallic materials WEE/41 BS EN ISO 15701:1999 Leather. Tests for colour fastness. Colour fastness to migration into plasticized poly (vinyl chloride) BS EN ISO 15703:1999 Leather. Tests for colour fastness. Colour fastness to mild washing BS EN ISO 16021:2001 Urine-absorbing aids. Basic principles for evaluation of single-use adult-incontinenceabsorbing aids from the perspective of users and caregivers CH/173/-/3 BS EN ISO :2007 Leather. Chemical determination of chromic oxide content. Quantification by titration BS EN ISO 9967:2007 Thermoplastics pipes. Determination of creep ratio PRI/88/4 BS EN ISO 19136:2009 Geographic information. Geography Markup Language (GML) IST/36 Update Standards Sep 2010 Prices may be subject to change. 47

48 British Standards Under Review continued... BS EN ISO 22721:2007 Conveyor belts. Specification for rubber- or plastics-covered conveyor belts of textile construction for underground mining PRI/67 BS EN :1993 Metallic powders. Determination of oxygen content by reduction methods. General guidelines ISE/65 BS EN :1993 Metallic powders. Determination of oxygen content by reduction methods. Total oxygen by reduction-extraction ISE/65 BS EN 24492:1993 Metallic powders, excluding powders for hardmetals. Determination of dimensional changes associated with compacting and sintering ISE/65 BS EN 24506:1993 Specification for hardmetals. Compression test ISE/65 BS EN 27740:1992 Specification for dimensions of surgical scalpels with detatchable blades CH/170 BS ISO 105-F06:2000 Textiles. Tests for colour fastness. Specification for silk adjacent fabric TCI/81 BS ISO 246:2007 Rolling bearings. Cylindrical roller bearings, separate thrust collars. Boundary dimensions MCE/7 BS ISO 355:2007 Rolling bearings. Tapered roller bearings. Boundary dimensions and series designations MCE/7 BS ISO 464:1995 Rolling bearings. Radial bearings with locating snap ring. Dimensions and tolerances MCE/7 BS ISO 582:1995 Rolling bearings. Chamfer dimensions. Maximum values MCE/7 BS ISO 732:2000 Photography. 120-size and 220-size films. Dimensions CPW/42 BS ISO 923:2000 Coal cleaning equipment. Performance evaluation PTI/16 BS ISO 1007:2000 Photography. 135-size film and magazine. Specifications CPW/42 BS ISO 1012:1998 Photography. Films in sheets and rolls for general use. Dimensions CPW/42 BS ISO :2000 Rolling bearings. Tolerances. Terms and definitions MCE/7 BS ISO :2007 Rolling bearings. Instrument precision bearings. Boundary dimensions, tolerances and characteristics of metric series bearings MCE/7 BS ISO :2007 Rolling bearings. Instrument precision bearings. Boundary dimensions, tolerances and characteristics of inch series bearings MCE/7 BS ISO 1230:2007 Photography. Determination of flash guide numbers for electronic flash equipment CPW/42 BS ISO 1272:2000 Essential oils. Determination of content of phenols AW/54 BS ISO 1957:2000 Machine-made textile floor coverings. Selection and cutting of specimens for physical tests PRI/3 BS ISO 2261:1994 Reciprocating internal combustion engines. Hand-operated control devices. Standard direction of motion MCE/14 BS ISO :2000 Reciprocating internal combustion engines. Vocabulary. Terms for engine design and operation MCE/14 BS ISO :1999 Reciprocating internal combustion engines. Vocabulary. Terms for engine maintenance MCE/14 BS ISO :1995 Rolling bearings. Accessories. Tapered sleeves. Dimensions MCE/7 BS ISO 3031:2000 Rolling bearings. Thrust needle roller and cage assemblies, thrust washers. Boundary dimensions and tolerances MCE/7 BS ISO 3297:2007 Information and documentation. International standard serial number (ISSN) IDT/2/18 BS ISO 3724:2007 Hydraulic fluid power. Filter elements. Determination of resistance to flow fatigue using particulate contaminant MCE/18/-/6 BS ISO 3852:2007 Iron ores for blast furnace and direct reduction feedstocks. Determination of bulk density ISE/58 BS ISO 4387:2000+A1:2008 Cigarettes. Determination of total and nicotinefree dry particulate matter using a routine analytical smoking machine AW/40 BS ISO 4700:2007 Iron ore pellets for blast furnace and direct reduction feedstocks. Determination of the crushing strength ISE/58 BS ISO 4708:2000 Composition cork. Gasket material. Test methods PRI/81 BS ISO 4709:2000 Composition cork. Gasket material. Classification system, requirements, sampling, packing and marking PRI/81 BS ISO 4710:2000 Cork. Cylindrical stoppers for sparkling wines and gasified wines. Characteristics PRI/81 BS ISO 4714:2000 Composition cork. Specifications, sampling, packaging and marking PRI/81 BS ISO 5781:2000 Hydraulic fluid power. Pressure reducing valves, sequence valves, unloading valves, throttle valves and check valves. Mounting surfaces MCE/18/-/5 BS ISO 5989:1995 Photography. Pre-packaged chemicals for the processing of silver halide based photographic materials. Vocabulary CPW/42 BS ISO :2007 Hydraulic fluid power. Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series. Medium series MCE/18/-/3 48 Prices may be subject to change. Update Standards Sep 2010

49 BS ISO :2007 Rotary shaft lip-type seals incorporating elastomeric sealing elements. Nominal dimensions and tolerances MCE/11 BS ISO 6798:1995 Reciprocating internal combustion engines. Measurement of emitted airborne noise. Engineering method and survey method MCE/14 BS ISO :2000 Pneumatic fluid power. Compressed air pressure regulators and filter-regulators. Test methods to determine the main characteristics to be included in literature from suppliers MCE/18/-/5 BS ISO 7322:2000 Composition cork. Test methods PRI/81 BS ISO :2005 Reciprocating internal combustion engines. Vocabulary of components and systems. Structure and external covers MCE/14/-/5 BS ISO :2005 Reciprocating internal combustion engines. Vocabulary of components and systems. Starting systems MCE/14/-/5 BS ISO 8070:2007 Milk and milk products. Determination of calcium, sodium, potassium and magnesium contents. Atomic absorption spectrometric method AW/5 BS ISO 8121:2007 Textile machinery. Knitting machines. Nameplate information TCI/33 BS ISO :2000 Reciprocating internal combustion engines. Exhaust emission measurement. Report of measuring results and test MCE/14/-/3 BS ISO 8188:2007 Textile machinery and accessories. Pitches of knitting machines TCI/33 BS ISO 8432:1987 Essential oils. Analysis by high performance liquid chromatography. General method AW/54 BS ISO :2007 Metallic tube connections for fluid power and general use. 37 flared connectors MCE/18/-/4 BS ISO 8532:1995 Securities. Format for transmission of certificate numbers IST/12 BS ISO :2000 Ostomy collection bags. Determination of odour transmission of colostomy and ileostomy bags CH/173/-/3 BS ISO 9019:1995 Securities. Numbering of certificates IST/12 BS ISO :1990 Freight containers. Information related to containers on board vessels. Bay plan system TW/1 BS ISO 9736:2000 Eye-ends, in corrosion-resistant steel, threaded, for aircraft control wire rope. Dimensions and loads ACE/12 BS ISO 9737:2000 Eye-ends, in corrosion resisting steel, swaged on aircraft control wire rope. Dimensions and loads ACE/12 BS ISO 9738:2000 Turnbarrels, for aircraft control wire rope. Dimensions and loads ACE/12 BS ISO 9747:2000 Double shank ball-ends, in corrosion-resistant steel, swaged on aircraft control wire rope. Dimensions and loads ACE/12 BS ISO 9748:2000 Ball-ends, in corrosion-resistant steel, swaged on aircraft control wire rope. Dimensions and loads ACE/12 BS ISO 9749:2000 Stud-ends, in corrosion-resistant steel, swaged on aircraft control wire rope. Dimensions and loads ACE/12 BS ISO 9757:2000 Fork-ends, in corrosion-resistant steel, threaded, for aircraft control wire rope turnbarrels. Dimensions and loads ACE/12 BS ISO 9758:2000 Fork-ends, in corrosion-resistant steel, threaded, for rolling bearings, for aircraft control wire rope. Dimensions and loads ACE/12 BS ISO 9759:2000 Fork ends, in corrosion-resistant steel, swaged on aircraft control wire rope. Dimensions and loads ACE/12 BS ISO 9760:2000 Aerospace. Fork-ends, in corrosion-resistant steel, swaged on aircraft control wire rope, for rolling bearings. Dimensions and loads ACE/12 BS ISO 9761:2000 Locking clips, in corrosion-resistant steel, for aircraft control wire rope turnbuckles. Dimensions ACE/12 BS ISO 9762:2000 Aircraft control wire rope assemblies. Dimensions and end-fitting combinations ACE/12 BS ISO 9841:2007 Oil of hyssop (Hyssopus officinalis L. ssp. officinalis) AW/54 BS ISO 10587:2000 Metallic and other inorganic coatings. Test for residual embrittlement in both metallic-coated and uncoated externally-threaded articles and rods. Inclined wedge method STI/33 BS ISO 10725:2000 Acceptance sampling plans and procedures for the inspection of bulk materials SS/3 BS ISO :1995 Aerospace. Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner. Metric series MCE/7 BS ISO :1995 Aerospace. Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner. Inch series MCE/7 BS ISO :1995 Aerospace. Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner. Technical specification MCE/7 BS ISO :2000 Textile floor coverings. Laboratory soiling tests. Kappasoil test PRI/3 BS ISO/IEC :2005 Identification cards. Optical memory cards. Linear recording method. Physical characteristics IST/17 Update Standards Sep 2010 Prices may be subject to change. 49

50 British Standards Under Review continued... BS ISO/IEC :2005 Identification cards. Optical memory cards. Linear recording method. Dimensions and location of the accessible optical area IST/17 BS ISO 12043:2007 Rolling bearings. Single-row cylindrical roller bearings. Chamfer dimensions for loose rib and non-rib sides MCE/7 BS ISO 12044:1995 Rolling bearings. Single-row angular contact ball bearings. Chamfer dimensions for outer ring non-thrust side MCE/7 BS ISO :2007 Connections for hydraulic fluid power and general use. Hose fittings. Hose fittings with ISO 6149 metric stud ends MCE/18/-/4 BS ISO :2007 Connections for hydraulic fluid power and general use. Hose fittings. Hose fittings with ISO flared ends MCE/18/-/4 BS ISO 12165:2000 Tools for moulding. Components of compression and injection moulds and diecasting dies. Terms and symbols MTE/12 BS ISO 12233:2000 Photography. Electronic still picture cameras. Resolution measurements CPW/42 BS ISO 13332:2000 Reciprocating internal combustion engines. Test code for the measurement of structure-borne noise emitted from high-speed and mediumspeed reciprocating internal combustion engines measured at the engine feet MCE/14/-/7 BS ISO :2000 Industrial variable-reach trucks. Stability tests MHE/7 BS ISO :2000 Centrifugally cast steel and alloy products. General testing and tolerances ISE/111 BS ISO :2007 Financial services. International bank account number (IBAN). Structure of the IBAN IST/12 BS ISO :2007 Financial services. International bank account number (IBAN). Role and responsibilities of the registration authority IST/12 BS ISO 13746:2000 Textile floor coverings. Guidelines for installation and use on stairs PRI/3 BS ISO 14707:2000 Surface chemical analysis. Glow discharge optical emission spectrometry (GD-OES). Introduction to use CII/60 BS ISO 14975:2000 Surface chemical analysis. Information formats CII/60 BS ISO 14976:1998 Surface chemical analysis. Data transfer format CII/60 BS ISO :2000 Hydraulic fluid power. Determination of fluidborne noise characteristics of components and systems. Measurement of speed of sound in a fluid in a pipe MCE/18 BS ISO 15217:2000 Fluid power systems and components. 16mm square electrical connector with earth contact. Characteristics and requirements MCE/18/-/5 BS ISO :2007 Rolling bearings. Measuring methods for vibration. Radial cylindrical roller bearings with cylindrical bore and outside surface MCE/7 BS ISO :2000 Pneumatic fluid power. Five-port directional control valves, sizes 18 mm and 26 mm. Mounting interface surfaces without electrical connector MCE/18 BS ISO 15600:2000 Tools for moulding. Thermal insulating sheets for injection moulds MTE/12 BS ISO 15668:1999 Banking. Secure file transfer (retail) IST/12 BS ISO 15870:2000 Powered industrial trucks. Safety signs and hazard pictorials. General principles MHE/7 BS ISO 15871:2000 Industrial trucks. Specification for indicator lights for container handling and grappler arm operations MHE/7 BS ISO 15967:2007 Direct reduced iron. Determination of the tumble and abrasion indices of hot briquetted iron (HBI) ISE/58 BS ISO 17115:2007 Health informatics. Vocabulary for terminological systems IST/35 BS ISO/IEC :2005 Information technology. Personal identification. ISO-compliant driving licence. Physical characteristics and basic data set IST/17 BS ISO :2007 Rigid PVC pipes. Differential scanning calorimetry (DSC) method. Measurement of the processing temperature PRI/88/4 BS ISO 20515:2007 Rolling bearings. Radial bearings, retaining slots. Dimensions and tolerances MCE/7 BS ISO 20516:2007 Rolling bearings. Aligning thrust ball bearings and aligning seat washers. Boundary dimensions MCE/7 BS ISO :2007 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for airpurification performance of semiconducting photocatalytic materials. Removal of nitric oxide RPI/13 BS ISO 22662:2007 Milk and milk products. Determination of lactose content by high-performance liquid chromatography (Reference method) AW/5 BS ISO :2007 Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of bulk density of ceramic powders. Tap density RPI/13 BS ISO 23181:2007 Hydraulic fluid power. Filter elements. Determination of resistance to flow fatigue using high viscosity fluid MCE/18/-/6 DD ISO/TS :2007 Vacuum technology. Bakable flanges. Dimensions of knife-edge flanges MCE/8/-/4 DD ISO/TS :2007 Health informatics. Medical waveform format. Encoding rules IST/35 BS 4G 229:1996 Schedule for environmental conditions and test procedures for airborne equipment ACE/58 50 Prices may be subject to change. Update Standards Sep 2010

51 BS G 260:1996 Environmental tests for aircraft equipment. Steady-state acceleration ACE/58 BS M 58:1986 Specification for anodic coating of titanium and titanium alloys by the sulphuric acid process ACE/65/-/4 NEW WORK STARTED The reference number of the committee responsible for each item of new work started is given after each entry. Where a work item has the temporary designation BS EN XXXX, it has not yet been allocated a standard number by the European standards body. BS 3HR 2:2010/Amendment 1 Aerospace series. Specification for nickelchromium-cobalt-titanium-aluminium heatresisting alloy billets, bars, forgings and parts (nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5) ACE/61/-/48 BS SP 11:1949+A2:2009/Amendment 3 Specification for washers for aircraft purposes. (primarily for facing purposes) ACE/12 BS SP 57 and 58:1955/Amendment 3 Specifications for rivet burrs for aircraft ACE/12 BS SP 122 to 125:1958/Amendment 2 Washers for Unified hexagons for aircraft (primarily for packing purposes) ACE/12 BS SP 127:1959+A2:2009/Amendment 3 Washers for unified hexagons for aircraft (primarily for facing purposes ) ACE/12 BS (Revision) Reliability of constructed or manufactured products, systems, equipment and components. Introductory guide to reliability will supersede BS :1986 DS/1 BS 7195:1989/Amendment 1 Guide for prevention of corrosion of metals caused by vapours from organic materials PKW/0 BS 8210 (Revision) Guide to building maintenance management will supersede BS 8210:1986 FMW/1 BS EN 126 (Revision) Multifunctional controls for gas burners for gas appliances will supersede BS EN 126:2004 GSE/22 BS EN 267:2009/Amendment 1 Automatic forced draught burners for liquid fuels RHE/13 BS EN 492 (Revision) Fibre cement slates and fittings. Product specification and test methods will supersede BS EN 492:2004 B/542 BS EN 494 (Revision) Fibre-cement profiled sheets and fittings. Product specification and test methods will supersede BS EN 494:2004 B/542 BS EN 687 (Revision) Resilient floor coverings. Specification for plain and decorative linoleum on a corkment backing will supersede BS EN 687:1997 PRI/3/60 BS EN 688 (Revision) Resilient floor coverings. Specification for corklinoleum will supersede BS EN 688:1997 PRI/3/60 BS EN 828 (Revision) Adhesives. Wettability. Determination by measurement of contact angle and critical surface tension of solid surface will supersede BS EN 828:1998 PRI/52 BS EN (Revision) Mobile waste containers. Containers with 2 wheels with a capacity up to 400 l for comb lifting devices, dimensions and design will supersede BS EN 840-1:2004 B/508/1 BS EN (Revision) Mobile waste containers. Containers with 4 wheels with a capacity up to l with flat lid(s), for trunnion and/or comb lifting devices. Dimensions and design will supersede BS EN 840-2:2004 B/508/1 BS EN (Revision) Mobile waste containers. Containers with 4 wheels with a capacity up to l with dome lid(s), for trunnion and/or comb lifting devices. Dimensions and design will supersede BS EN 840-3:2004 B/508/1 BS EN (Revision) Mobile waste containers. Containers with 4 wheels with a capacity up to l with flat lid(s), for wide trunnion or BG- and/or wide comb lifting devices. Dimensions and design will supersede BS EN 840-4:2004 B/508/1 BS EN (Revision) Mobile waste containers. Performance requirements and test methods will supersede BS EN 840-5:2004 B/508/1 BS EN (Revision) Mobile waste containers. Safety and health requirements will supersede BS EN 840-6: A1:2008 B/508/1 BS EN (Revision) Safety of woodworking machines. One side moulding machines with rotating tools. Numerically controlled (NC) boring and routing machines will supersede BS EN 848-3:2007+A2:2009 MTE/23 BS EN 1238 (Revision) Adhesives. Determination of the softening point of thermoplastic adhesives (ring and ball) will supersede BS EN 1238:1999 PRI/52 BS EN 1239 (Revision) Adhesives. Freeze-thaw stability will supersede BS EN 1239:1998 PRI/52 BS EN 1240 (Revision) Adhesives. Determination of hydroxyl value and/or hydroxyl content will supersede BS EN 1240:1998 PRI/52 BS EN 1243 (Revision) Adhesives. Determination of free formaldehyde in amino and amidoformaldehyde condensates will supersede BS EN 1243:1999 PRI/52 BS EN 1245 (Revision) Adhesives. Determination of ph. Test method will supersede BS EN 1245:1999 PRI/52 BS EN Road restraint systems. Motorcycle road restraint systems which reduce the impact severity of motorcyclist collisions with safety barriers B/509/1 BS EN 1423 (Revision) Road marking materials. Drop on materials. Glass beads, antiskid aggregates and mixtures of the two will supersede BS EN 1423:1998 B/509/2 Update Standards Sep 2010 Prices may be subject to change. 51

52 New Work Started continued... BS EN 1527 (Revision) Building hardware. Hardware for sliding doors and folding doors. Requirements and test methods will supersede BS EN 1527:1998 B/538 BS EN (Revision) Fire resistance and smoke control tests for door, shutter and, openable window assemblies and elements of building hardware. Fire resistance tests for doors, shutters and openable windows will supersede BS EN :2008 FSH/22/5 BS EN (Revision) Components for slings. Safety. Forged steel components, Grade 8 will supersede BS EN :2000+A1:2008 MHE/1 BS EN 1751 (Revision) Ventilation for buildings. Air terminal devices. Aerodynamic testing of damper and valves will supersede BS EN 1751:1999 RHE/2 BS EN 1790 (Revision) Road marking materials. Preformed road markings will supersede BS EN 1790:1998 B/509/2 BS EN 1824 (Revision) Road marking materials. Road trials will supersede BS EN 1824:1998 B/509/2 BS EN ISO 1825 Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling. Specification PRI/66 BS EN :2002+A1:2009/ Amendment 2 Safety of woodworking machines. Circular sawing machines. Circular saw benches/upcutting cross-cut sawing machines MTE/23 BS EN :2002+A1:2009/ Amendment 2 Safety of woodworking machines. Circular sawing machines. Circular sawing machines for firewood and dual purpose circular sawing machines for firewood/circular saw benches, with manual loading and/or unloading MTE/23 BS EN (Revision) Safety of woodworking machines. Circular sawing machines. Single blade log sawing machines with integrated feed table and manual loading and/or unloading will supersede BS EN :2002+A1:2009 MTE/23 BS EN (Revision) Safety of woodworking machines. Circular sawing machines. Single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading will supersede BS EN :2001+A1:2009 MTE/23 BS EN (Revision) Safety of woodworking machines. Circular sawing machines. Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading will supersede BS EN :2000+A1:2009 MTE/23 BS EN :2007/Amendment 2 Safety of woodworking machines. Circular sawing machines. Horizontal beam panel sawing machines MTE/23 BS EN :2007/Amendment 2 Safety of woodworking machines. Circular sawing machines. Vertical panel sawing machines MTE/23 BS EN (Revision) Safety of woodworking machines. Circular sawing machines. Multi-blade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading will supersede BS EN :2004+A1:2009 MTE/23 BS EN (Revision) Safety of woodworking machines. Circular sawing machines. Double mitre sawing machines for V-cutting will supersede BS EN :2005+A1:2009 MTE/23 BS EN (Revision) Safety of woodworking machines. Circular sawing machines. Manual horizontal cutting cross-cut sawing machines with one saw unit (manual radial arm saws) will supersede BS EN :2007+A2:2009 MTE/23 BS EN 1871 (Revision) Road marking materials. Physical properties will supersede BS EN 1871:2000 B/509/2 BS EN 1935 (Revision) Building hardware. Single-axis hinges. Requirements and test methods will supersede BS EN 1935:2002 B/538 BS EN (Revision) Structural adhesives. Corrosion. Determination and classification of corrosion to a copper substrate will supersede BS EN :2001 PRI/52 BS EN (Revision) Structural adhesives. Corrosion. Determination and classification of corrosion to a brass substrate will supersede BS EN :2001 PRI/52 BS EN :2005/Amendment 1 Eurocode 6. Design of masonry structures. General rules for reinforced and unreinforced masonry structures B/525 BS EN :2005/Amendment 2 Eurocode 8. Design of structures for earthquake resistance. Bridges B/525/8 BS EN :2007/Amendment 1 Eurocode 9. Design of aluminium structures. Cold-formed structural sheeting B/525/9 BS EN ISO 3381 (Revision) Railway applications. Acoustics. Measurement of noise inside railbound vehicles will supersede BS EN ISO 3381:2005 EH/1/2 BS EN ISO :2009/Amendment 1 Mechanical properties of corrosion-resistant stainless steel fasteners. Bolts, screws and studs FME/9/1 BS EN ISO :2009/Amendment 1 Mechanical properties of corrosion-resistant stainless steel fasteners. Nuts FME/9/1 BS EN ISO 3994 (Revision) Plastics hoses. Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials. Specification will supersede BS EN ISO 3994:2001 PRI/66 BS EN ISO 4787:2010/Amendment 1 Laboratory glassware. Volumetric instruments. Methods for testing of capacity and for use LBI/18 BS EN ISO 5364 Anaesthetic and respiratory equipment. Oropharyngeal airways CH/121 BS EN ISO Leather. Determination of flex resistance. Vamp flex method will supersede BS EN ISO 22288:2009 BS EN ISO 7225:2007/Amendment 1 Gas cylinders. Precautionary labels PVE/3/7 52 Prices may be subject to change. Update Standards Sep 2010

53 BS EN ISO 8331 (Revision) Rubber and plastics hoses and hose assemblies. Guidelines for selection, storage, use and maintenance will supersede BS ISO 8331:2007 PRI/66 BS EN (Revision) Non-alloy steel tubes suitable for welding and threading. Technical delivery conditions will supersede BS EN 10255:2004 ISE/110 BS EN Stainless steel plumbing fittings. Fittings with press ends for metallic tubes ISE/110 BS EN ISO (Revision) Petroleum, petrochemical and natural gas industries. Axial and centrifugal compressors and expander-compressors for special-purpose applications handling gas or process air. General requirements will supersede BS EN ISO 10439:2002 MCE/8/-/1 BS EN ISO (Revision) Petroleum, petrochemical and natural gas industries. Axial and centrifugal compressors and expander-compressors for special-purpose applications handling gas or process air. Nonintegrally geared centrifugal and axial compressors will supersede BS EN ISO 10439:2002 MCE/8/-/1 BS EN ISO (Revision) Petroleum, petrochemical and natural gas industries. Axial and centrifugal compressors and expander-compressors for special-purpose applications handling gas or process air. Integrally geared centrifugal compressors will supersede BS EN ISO 10439:2002 MCE/8/-/1 BS EN ISO (Revision) Petroleum, petrochemical and natural gas industries. Axial and centrifugal compressors and expander-compressors for special-purpose applications handling gas or process air. Expander-compressors will supersede BS EN ISO 10439:2002 MCE/8/-/1 BS EN ISO Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks. General will supersede BS EN :2002 PRI/88/3 BS EN ISO Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks. Lining with close-fit pipes will supersede BS EN :2002 PRI/88/3 BS EN ISO Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks. Lining with cured-in-place pipes will supersede BS EN :2002 PRI/88/3 BS EN ISO Plastics piping systems for renovation of underground water supply networks. General will supersede BS EN :2004 PRI/88/3 BS EN ISO Plastics piping systems for renovation of underground water supply networks. Lining with close-fit pipes will supersede BS EN :2004 PRI/88/3 BS EN ISO (Implementation) Colorimetry. CIE standard colorimetric observers will supersede BS ISO :2007 STI/14 BS EN ISO (Implementation) Colorimetry. CIE standard illuminants will supersede BS ISO 10526:2007 CPL/34 BS EN ISO (Implementation) Colorimetry. CIE 1976 L * a * b * Colour space will supersede BS ISO :2008 STI/14 BS EN ISO (Implementation) Colorimetry. CIE 1976 L * u * v * Colour space and u, v uniform chromaticity scale diagram will supersede BS ISO :2009 STI/14 BS EN ISO (Revision) Health informatics. Digital imaging. Communication, workflow and data management will supersede BS EN 12052:2004 IST/35 BS EN (Revision) Aluminium and aluminium alloys. Terms and definitions. General terms will supersede BS EN :1998 NFE/35 BS EN (Revision) Mountaineering equipment. Connectors. Safety requirements and test methods will supersede BS EN 12275:1998 SW/136/5 BS EN 12413:2007/Amendment 1 Safety requirements for bonded abrasive products MTE/13 BS EN (Revision) Fibre-cement flat sheets. Product specification and test methods will supersede BS EN 12467:2004 B/542 BS EN (Revision) Gas meters. Rotary displacement gas meters will supersede BS EN 12480:2002 GSE/25 BS EN (Revision) Adhesives for leather and footwear materials. Determination of colour change of white or bright coloured leather surfaces by migration will supersede BS EN 12705:2000 PRI/52 BS EN (Revision) Road marking materials. Laboratory methods for identification will supersede BS EN 12802:2000 B/509/2 BS EN (Revision) Adhesives. Determination of elastic behaviour of liquid adhesives (elasticity index) will supersede BS EN 12962:2001 PRI/52 BS EN ISO (Revision) Health informatics. Service architecture. Enterprise viewpoint will supersede BS EN :2007 IST/35 BS EN ISO (Revision) Health informatics. Service architecture. Information viewpoint will supersede BS EN :2007 IST/35 BS EN ISO (Revision) Health informatics. Service architecture. Computational viewpoint will supersede BS EN :2007 IST/35 BS EN (Revision) Building hardware, fittings for windows and door height windows. Requirements and test methods. Casement fastener handles will supersede DD CEN/TS :2004 B/538 BS EN (Revision) Road marking materials. Wear simulators will supersede BS EN 13197:2001 B/509/2 BS EN (Revision) Road marking materials. Requirements for factory production control will supersede BS EN 13212:2001 B/509/2 Update Standards Sep 2010 Prices may be subject to change. 53

54 New Work Started continued... BS EN (Revision) Precast concrete products. Linear structural elements will supersede BS EN 13225:2004 B/524 BS EN ISO Aseptic processing of health care products. General requirements CH/198 BS EN ISO Aseptic processing of health care products. Filtration CH/198 BS EN ISO Aseptic processing of health care products. Lyophilization CH/198 BS EN ISO Aseptic processing of health care products. Clean-in-place technologies CH/198 BS EN ISO Aseptic processing of health care products. Sterilization in place CH/198 BS EN ISO Aseptic processing of health care products. Isolator systems CH/198 BS EN (Revision) Road marking materials. Quality control. Sampling from storage and testing will supersede DD ENV :1999 B/509/2 BS EN (Revision) Requirements for sleeping bags will supersede BS EN 13537:2002 SW/136 BS EN (Revision) Wood flooring. Solid pre-assembled hardwood board will supersede BS EN 13629:2002 B/543 BS EN (Revision) Carbonate liming materials. Determination of reactivity. Potentiometric titration method with hydrochloric acid will supersede BS EN 13971:2008 CII/37 BS EN (Revision) High rise aerial appliances for fire service use. Turntable ladders with combined movements. Safety and performance requirements and test methods will supersede BS EN 14043:2005+A1:2009 FSH/17 BS EN (Revision) High rise aerial appliances for fire service use. Turntable ladders with sequential movements. Safety and performance requirements and test methods will supersede BS EN 14044:2005+A1:2009 FSH/17 BS EN (Revision) Thermoplastic and flexible metal pipework for underground installation at petrol filling stations will supersede BS EN 14125:2004 PVE/393/6 BS EN :2005/Amendment 1 Railway applications. Brake discs for railway rolling stock. Brake discs pressed or shrunk onto the axle or drive shaft, dimensions and quality requirements RAE/4 BS EN (Revision) Safety of children s clothing. Cords and drawstrings on children s clothing. Specifications will supersede BS EN 14682:2007 TCI/66 BS EN 14846:2008/Amendment 1 Building hardware. Locks and latches. Electromechanically operated locks and striking plates. Requirements and test methods B/538 BS EN (Revision) Structural adhesives. Determination of shear behaviour of structural bonds. Torsion test method using butt- bonded hollow cylinders will supersede BS EN :2004 PRI/52 BS EN (Revision) Structural adhesives. Determination of shear behaviour of structural bonds. Thick adherends shear test will supersede BS EN :2004 PRI/52 BS EN (Revision) Leather. Leather for automotive. Test methods will supersede DD CEN/TS 14906:2004 BS EN 15102:2007/Amendment 1 Decorative wallcoverings. Roll and panel form products CW/35 BS EN :2008/Amendment 1 Railway applications. Brake indicators. Pneumatically operated brake indicators RAE/4 BS EN (Revision) Energy performance of buildings. Impact of building automation, controls and building management will supersede BS EN 15232:2007 RHE/16 BS EN 15595:2009/Amendment 1 Railway applications. Braking. Wheel slide protection RAE/4 BS EN Ventilation for buildings. Air diffusion. Measurements in the occupied zone of air conditioned/ventilated rooms to evaluate thermal and acoustic conditions RHE/2 BS EN ISO :2008/Amendment 1 Welding consumables. Test methods. Test methods for all-weld metal test specimens in steel, nickel and nickel alloys WEE/39 BS EN Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external roofs, walls and ceilings. Requirements and test methods B/542/1 BS EN Air traffic management. Software assurance level ACE/58/-/5 BS EN Foodstuffs. Determination of sucralose. High performance liquid chromatographic method AW/-/3 BS EN Water quality. Guidance on the use of in vivo absorption techniques for the estimation of chlorophyll concentration in marine and fresh water sample EH/3/5 BS EN Conservation of cultural property. Exhibition lighting of cultural property B/560 BS EN Water quality. Guidance standard for selection and design of taxonomic keys EH/3/5 BS EN ISO Small craft. Electric navigation lights. Installation and placement GME/33 BS EN ISO (Revision) Corrosion of metals and alloys. Corrosion in artificial atmosphere. Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution will supersede BS EN ISO 16701:2008 ISE/NFE/8 BS EN ISO Leather. Physical and mechanical tests. Determination of fogging characteristics will supersede BS EN 14288: Prices may be subject to change. Update Standards Sep 2010

55 BS EN ISO Leather. Physical and mechanical tests. Determination of resistance to horizontal spread of flame will supersede BS EN 14326:2003 BS EN ISO (Revision) Leather. Physical and mechanical tests. Determination of dry heat resistance of leather will supersede BS EN ISO 17227:2002 BS EN ISO Leather. Physical and mechanical tests. Determination of water penetration pressure will supersede BS EN 14289:2003 BS EN ISO Leather. Physical and mechanical tests. Determination of water repellency of garment leather will supersede BS EN 14340:2004 BS EN ISO (Implementation) Binders for paints and varnishes. Gum rosin. Gas-chromatographic analysis (ISO 19334:2010) will supersede BS ISO 19334:2010 STI/3 BS EN ISO (Revision) Gas turbine applications. Safety will supersede BS ISO 21789:2009 MCE/16 BS EN ISO (Revision) Transfer sets for pharmaceutical preparations. Requirements and test methods will supersede BS ISO 22413:2007 CH/212 BS EN ISO (Revision) Transportable gas cylinders. Inspection and maintenance of cylinder valves will supersede BS ISO 22434:2006 PVE/3 BS EN ISO Vitreous and porcelain enamels. Determination of resistance to chemical corrosion. Determination of resistance to chemical corrosion by acids at room temperature will supersede BS EN :2004 STI/36 BS EN ISO Vitreous and porcelain enamels. Determination of resistance to chemical corrosion. Determination of resistance to chemical corrosion by boiling acids, boiling neutral liquids and/or their vapours will supersede BS EN :2004 STI/36 BS EN ISO Vitreous and porcelain enamels. Determination of resistance to chemical corrosion. Determination of resistance to chemical corrosion by alkaline liquids using a hexagonal vessel will supersede BS EN :2004 STI/36 BS EN ISO Vitreous and porcelain enamels. Determination of resistance to chemical corrosion. Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel will supersede BS EN :2004 STI/36 BS EN ISO Vitreous and porcelain enamels. Glass-lined apparatus for process plants. Quality requirements for apparatus, components, appliances and accessories will supersede BS EN :2006 STI/36 BS EN ISO Vitreous and porcelain enamels. Glass-lined apparatus for process plants. Designation and specification of resistance to chemical attack and thermal shock will supersede BS EN :2006 STI/36 BS EN ISO Vitreous and porcelain enamels. Glass-lined apparatus for process plants. Thermal shock resistance will supersede BS EN :2006 STI/36 BS EN ISO Vitreous and porcelain enamels. Characteristics of enamel coatings applied to steel panels intended for architecture will supersede BS EN 14431:2004 STI/36 BS EN ISO Vitreous and porcelain enamels. Determination of the edge covering on enamelled steel plate to be used in heat exchangers will supersede BS EN 14863:2005 STI/36 BS EN ISO Vitreous and porcelain enamels. Regenerative, enamelled and packed panels for air-gas and gas-gas heat exchangers. Specifications will supersede BS EN 14866:2005 STI/36 BS EN ISO Vitreous and porcelain enamels. Production of specimens for testing enamels on sheet steel, sheet aluminium and cast iron will supersede BS EN 15206:2007 STI/36 BS EN ISO Vitreous and porcelain enamels. Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges will supersede BS EN 15282:2007 STI/36 BS EN ISO Cosmetics. Microbiology. Guidelines for the risk assessment and identification of microbiologically low-risk products CW/217 BS EN Connectors sets and interconnect components to be used in optical fibre communication systems. Product specifications. Type LF3 APC simplex terminated on IEC category B1.1 and B1.3 single mode fibre with with titanium composite ferrule for Category C GEL/86/2 BS EN Fibre organisers and closures to be used in optical fibre communication systems. Product specifications. Fibre management system, splice wall box, for category C & G GEL/86/2 BS EN (Revision) Environmental testing. Test methods. Test Cab. Damp heat, steady state will supersede BS EN :2002 GEL/104 BS EN (Revision) Power transformers. Insulation levels, dielectric tests and external clearances in air will supersede BS EN :2001 PEL/14 BS EN :2006/Amendment 1 Miniature fuses. Definitions for miniature fuses and general requirements for miniature fuselinks PEL/32 BS EN (Revision) Electrical relays. Common format for transient data exchange (COMTRADE) for power systems will supersede BS EN :2001 PEL/95 BS EN (Revision) Packaging of components for automatic handling. Stick magazines for electronic components encapsulated in packages of form E and G will supersede BS EN :1998 EPL/40X BS EN Connectors for electronic equipment. Tests and measurements. Signal integrity tests up to 500 MHz on M12 style connectors. Tests 29a to 29g EPL/48 Update Standards Sep 2010 Prices may be subject to change. 55

56 New Work Started continued... BS EN Safety in electroheating installations. Particular requirements for infra-red electroheating installations PEL/27 BS EN Semiconductor devices. Signal (including switching diodes) and regulator diodes will supersede BS :1986 and BS QC :1987 EPL/47 BS EN (Revision) Optical fibres. Product specifications. Sectional specification for class B single-mode fibres will supersede BS EN :2008 GEL/86/1 BS :2004/Amendment 1 Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs). General rules PEL/23/1 BS :2004/Amendment 1 Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs). General rules PEL/23/1 BS EN (Revision) Radio-frequency connectors. Sectional specification for series SMP push-on radiofrequency coaxial connectors will supersede DD IEC/PAS :2010 EPL/46 BS EN (Revision) Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Composite temperature/humidity cyclic test will supersede BS EN :2010 GEL/86/2 BS EN (Revision) Fibre optic connector interfaces. Type SC connector family will supersede BS EN :1997 GEL/86/2 BS EN (Revision) Fibre optic connector interfaces. Type MU connector family will supersede BS EN :1997 GEL/86/2 BS EN Industrial communication networks. Profiles. Installation of fieldbuses AMT/7 BS EN Photovoltaic (PV) module performance testing and energy rating. Spectral response, incidence angle and module operating temperature measurements GEL/82 BS EN 62035:2000/Amendment 2 Discharge lamps (excluding fluorescent lamps). Safety specifications CPL/34/1 BS EN Uninterruptible Power Systems (UPS). Environmental aspects PEL/22 BS EN Semiconductor devices. Micro-electromechanical devices. Forming limit measuring method of metallic film materials EPL/47 BS EN Semiconductor devices. Micro-electromechanical devices. Bulge test method for measuring mechanical properties of thin films EPL/47 BS EN Plugs, socket-outlets, vehicle couplers and vehicle inlets. Conductive charging of electric vehicles. Dimensional interchangeability requirements for pin and contact-tube couplers with rated operating voltage up to V d.c. and rated current up to 400 A for dedicated d.c. charging PEL/23/4 BS EN (Revision) Medical device software. Software life-cycle processes will supersede BS EN 62304:2006 CH/62/1 BS EN (Revision) Commissioning of electrical, instrumentation and control systems in the process industry. Specific phases and milestones will supersede BS EN 62337:2007 AMT/7 BS EN (Revision) Automation systems in the process industry. Factory acceptance test (FAT), site acceptance test (SAT), and site integration test (SIT) will supersede BS EN 62381:2007 AMT/7 BS EN (Revision) Electrical and instrumentation loop check will supersede BS EN 62382:2007 AMT/7 BS EN High-voltage plugs, socket-outlets, ship connectors and ship inlets for high-voltage shore connection systems (HVSC-Systems). Interchangeability requirements for accessories to be used by various types of ship PEL/23/4 BS EN Fibre optic interconnecting devices and passive components. Fibre optic connector product specifications. LC-PC duplex multimode connectors terminated on IEC category A1a and A1b fibre GEL/86/2 BS EN Industrial electroheating installations. Test methods for infrared electroheating installations PEL/27 BS EN Sorting test to determine metal content of Municipal Incinerator Bottom Ash (MIBA) Aggregates. Tests for chemical properties of aggregates B/502/6 BS EN Management and control of operational activities in drains and sewers. Rehabilitation B/505 BS EN Packaging. Transport packaging for dangerous goods. Test methods PKW/0/4 DD CEN/TS Intelligent transport systems. DATEX II data exchange specifications for traffic management and information. Context and framework EPL/278 DD CEN/TS Intelligent transport systems. DATEX II data exchange specifications for traffic management and information. Location referencing EPL/278 DD CEN/TS Intelligent transport systems. DATEX II data exchange specifications for traffic management and information. Situation publication EPL/278 DD CEN/TS Determination of slip resistance of pedestrian surfaces. Methods of evaluation B/507/7 DD CEN/TS Traffic and Travel Information (TTI). TTI via Transport Protocol Expert Group (TPEG) datastreams. Weather information (WEA) application (TPEGWEA_1.0/001) EPL/278 DD CEN/TS (Revision) Petroleum, petrochemical and natural gas industries. Composite repairs for pipework. Qualification and design, installation, testing and inspection will supersede DD ISO/TS 24817:2006 PSE/17 56 Prices may be subject to change. Update Standards Sep 2010

57 DD CEN/TS (Revision) Petroleum, petrochemical and natural gas industries. Sector-specific quality management systems. Requirements for product and service supply organizations will supersede PD ISO/TS 29001:2007 PSE/17 DD CEN/TS (Revision) Electrical resistance trace heating systems for industrial and commercial applications. Application guide for system design, installation and maintenance will supersede DD IEC/TS :2008 PEL/27 PD CEN/TR TR Basic data used to produce EN 14240:2004, Ventilation for buildings. Chilled ceilings. Testing and rating, and EN 14518: 2005, Ventilation for buildings. Chilled beams. Testing and rating of passive chilled beams RHE/2 PD CEN/TR (Revision) Petroleum and natural gas industries. Equations and calculations for the properties of casing, tubing, drill pipe and line pipe used as casing or tubing will supersede PD ISO/TR 10400:2007 PSE/17 PD CEN/TR (Revision) Petroleum and natural gas industries. Classification and conformity assessment of products, processes and services will supersede PD ISO/TR 13881:2001 PSE/17 PD CEN/TR (Revision) Unified tests procedures for the tests of EN 3-7 will supersede PD CEN/TR 15642:2008 FSH/2 PD CEN/TR Sludge, treated biowaste and soil. Methods for the validation of biotechnological, thermal and chemical processes for the treatment of animal by-products, sewage sludge and biowastes in order to determine the hygienic safety of the resulting fertilizers or comparable products H/-/4 BS ISO Technical drawings. General principles of presentation. Presentation of shipbuilding drawings TDW/4 BS ISO Technical drawings. Indication of dimensions and tolerances. Dimensioning for shipbuilding drawings TDW/4 BS ISO Bonded abrasive products. Dimensions. Glass grinding wheels MTE/13 BS ISO 1938 Geometrical product specifications (GPS). Dimensional measuring equipment. Plain limit gauges of linear size will partially supersede BS 969:2008 TDW/4 BS ISO Rubber, vulcanized or thermoplastic. Determination of stress relaxation in compression. With temperature cycling PRI/22 BS ISO Statistics. Vocabulary and symbols. Survey sampling SS/1 BS ISO Compressor, pneumatic tools and machines. Vocabulary. Air treatment MCE/8/-/3 BS ISO (Revision) Agricultural machinery. Safety. General requirements will supersede BS EN ISO :2009 AGE/32 BS ISO Tractors and self-propelled machinery for agriculture. Operator s field of vision. Selfpropelled machinery AGE/32 BS ISO (Revision) Hydraulic fluid power. Flange connectors with split or one-piece flange clamps and metric or inch screws. Flange connectors for use at pressures of 35 MPa (350 bar) to 40 MPa (400 bar), DN 13 to DN 51 will supersede BS ISO :2002 MCE/18/-/4 BS ISO Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles. Technical conditions for inspection and delivery NFE/35 BS ISO Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles. Mechanical properties NFE/35 BS ISO Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles. Extruded rectangular bars. Tolerances on shape and dimensions NFE/35 BS ISO Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles. Extruded profiles. Tolerances on shape and dimensions NFE/35 BS ISO Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles. Extruded round, square and hexagonal bars. Tolerances on shape and dimensions NFE/35 BS ISO Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles. Round, square, rectangular and hexagonal tubes. Tolerances on shape and dimensions NFE/35 BS ISO Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles. Chemical composition - NFE/35 BS ISO (Revision) Road vehicles. Sheath-type glow-plugs with conical seating and their cylinder head housing. M10 glow- plugs will supersede BS ISO :2009 MCE/9 BS ISO 6556 Laboratory glassware; Filter flasks will supersede BS 1739:1982 LBI/36 BS ISO 6623 (Revision) Internal combustion engines. Piston rings. Scraper rings made of cast iron will supersede BS ISO 6623:2004 MCE/9 BS ISO (Revision) Wheelchairs. Determination of effectiveness of brakes will supersede BS ISO :2003 CH/173/1 BS ISO 8513 Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of longitudinal tensile properties PRI/88/2 BS ISO (Revision) Pipes and fittings made of crosslinked polyethylene (PE-X). Estimation of the degree of crosslinking by determination of the gel content will supersede BS ISO 10147: A1:2008 PRI/88/4 BS ISO/IEC Identification cards. Test methods. Optical memory cards. Holographic recording method IST/17 BS ISO Sensory analysis. Methodology. General guidance for conducting hedonic tests with consumers in a controlled area AW/12 Update Standards Sep 2010 Prices may be subject to change. 57

58 New Work Started continued... BS ISO (Revision) Banking. Key management (retail). Symmetric ciphers, their key management and life cycle will supersede BS ISO :2005 IST/12 BS ISO (Revision) Agricultural machinery. Agricultural trailers and trailed equipment. Drawbar jacks will supersede BS ISO 12140:1998 AGE/32 BS ISO Indoor air. Road vehicles. Determination of the emissions of volatile organic compounds from car trim components. Bag method. (Screening method) EH/2/3 BS ISO Indoor air. Road vehicles. Determination of the emissions of volatile organic compounds from car trim components. Micro-chamber method EH/2/3 BS ISO Non-destructive testing. Terminology. Terms used in magnetic particle testing WEE/46 BS ISO Ceramic tiles. Definitions, classification, characteristics and marking B/539 BS ISO Sustainability criteria for biofuel PTI/20 BS ISO Plastics pipes and fittings. Slow peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 50 mm PRI/88/4 BS ISO Water quality. Measurement of lead 210 activity concentration. Liquid scintillation counting method EH/3 BS ISO Water quality. Measurement of radium 226 activity concentration. Liquid scintillation counting method EH/3 BS ISO Vehicle interface for provisioning and support of ITS Services EPL/278 BS ISO (Revision) Particle size analysis. Image analysis methods. Static image analysis methods will supersede BS ISO :2005 LBI/37 BS ISO Industrial furnace and associated thermal processing equipement. General safety requirements RHE/13 BS ISO Industrial furnaces and associated thermal processing equipment. Safety requirements for combustion and fuel handling systems RHE/13 BS ISO Industrial furnaces and associated thermal processing equipment. Method of measuring energy balance and calculating efficiency. General methodology RHE/13 BS ISO Industrial furnaces and associated thermal processing equipment. Method of measuring energy balance and calculating efficiency. Reheating furnace for steel RHE/13 BS ISO Industrial furnaces and associated thermal processing equipment. Method of measuring energy balance and calculating efficiency. Batch type aluminium melting furnace RHE/13 BS ISO Industrial furnaces and associated thermal processing equipment. Method of measuring energy balance and calculating efficiency. Controlled atmosphere furnace RHE/13 BS ISO Solid mineral fuel. Major and minor elements in hard coal ash and coke ash. Wavelength dispersive x-ray fluorescence spectrometric method PTI/16 BS ISO Safety of machinery. Pressure-sensitive protective devices. General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors MCE/3 BS ISO Soil quality. Determination of polycyclic aromatic hydrocarbons (PAH). Method by gas chromatography (GC) and high performance liquid chromatography (HPLC) EH/4 BS ISO Soil quality. Determination of polychlorinated biphenyls. Method by GC-MS and GC-ECD EH/4 BS ISO Soil quality. Determination of linear alkylbenzene sulphonate (LAS). Method by HPLC with fluorescence detection (LC-FLD) and mass selective detection (LC-MSD) EH/4 BS ISO Soil quality. Determination of nonylphenos (NP) and nonylphenol-mono- and diethoxylates. Method by gas chromatography with mass selective detection (GC-MS) EH/4 BS ISO Soil quality. Determination of selected phthalates. Method using capillary gas chromatography with mass spectrometric detection EH/4 BS ISO Soil quality. Determination of dioxines and furans and dioxin like polychlorinated biphenyls by gas chromatography with high resolution mass spectrometry (GC/HRMS) EH/4 BS ISO (Revision) Bonded abrasive products. Limit deviations and run-out tolerances will supersede BS ISO 13942:2000 MTE/13 BS ISO Implants for surgery. Active implantable medical devices. General requirements for safety, marking and for information to be provided by the manufacturer CH/150/6 BS ISO/IEC :2006/Amendment 2 Information technology. Security techniques. Digital signatures with appendix. Discrete logarithm based mechanisms IST/33 BS ISO Petroleum and natural gas industries. Cathodic protection of pipeline transportation systems. Offshore pipelines PSE/17/2 BS ISO Workplace air. Respirable crystalline silica by x- ray diffraction. Method by direct on filter analysis EH/2/2 BS ISO Workplace air. Respirable crystalline silica by x- ray diffraction. Method by indirect analysis EH/2/2 BS ISO Water quality. Determination of toxicity of fresh water sediments using Hyalella azteca EH/3/5 BS ISO Thermal insulating products for building applications. Determination of compressive creep B/540/8 58 Prices may be subject to change. Update Standards Sep 2010

59 BS ISO Thermal insulating products for building applications. Determination of long term water absorption by immersion B/540/8 BS ISO Thermal insulating products for building applications. Determination of long term water absorption by diffusion B/540/8 BS ISO Thermal insulating products for building applications. Determination of shear behaviour B/540/8 BS ISO Thermal insulating products for building applications. Conditioning to moisture equilibrium under specified temperature and humidity conditions B/540/8 BS ISO Thermal insulating products for building applications. Determination of behaviour under cyclic loading B/540/8 BS ISO Thermal insulating products for building applications. Determination of freeze-thaw resistance B/540/8 BS ISO Measurement and reporting of underwater sound radiated from merchant ships SME/32/-/2 BS ISO (Revision) Banking. Requirements for message authentication using symmetric techniques will supersede BS ISO 16609:2004 IST/12 BS ISO (Revision) Welding consumables. Wire electrodes, wires, rods and deposits for gas-shielded arc welding of high strength steels. Classification will supersede BS EN ISO 16834:2007 WEE/39 BS ISO Geographic information. Data quality will supersede BS EN ISO 19113:2005, BS EN ISO 19114:2005 and DD ISO/TS 19138:2006 IST/36 BS ISO/IEC Specification of data value domain services and interfaces supporting collaborative information processing in intelligent sensor networks ICT/-/1 BS ISO Intelligent transport systems. Communications access for land mobiles (CALM). Infra-red systems EPL/278 BS ISO Plastics pipes and fittings. Butt fusion jointing procedures for polyethylene (PE) pipes and fittings used in the construction of gas and water distribution systems PRI/88/2 BS ISO Corrosion of metals and alloys. Test method for isothermal exposure oxidation testing under high temperature corrosion conditions for metallic materials ISE/NFE/8 BS ISO (Revision) Welding consumables. Wire electrodes, wires, rods and deposits for gas-shielded arc welding of creep-resisting steel. Classification will supersede BS EN ISO 21952:2007 WEE/39 BS ISO Prerequisite programmes on food safety. Good manufacturing practices for food services AW/90 BS ISO Industrial trucks. Verification of stability. Lateral and front stacking trucks with elevating operator position MHE/7 BS ISO (Revision) Hybrid-electric road vehicles. Exhaust emissions and fuel consumption measurements. Nonexternally chargeable vehicles will supersede BS ISO 23274:2007 PEL/69 BS ISO (Revision) Laminate floor coverings. Determination of locking strength for mechanically assembled panels will supersede BS ISO 24334:2006 PRI/60 BS ISO (Revision) Welding consumables. Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of creep-resisting steels. Classification will supersede BS EN ISO 24598:2007 WEE/39 BS ISO Language resource management. Feature structures. Feature structure representation TS/1 BS ISO 28004:2007/Amendment 1 Security management systems for the supply chain. Guidelines for the implementation of ISO SME/32 BS ISO/IEC Reference architecture for sensor network applications and services. General overview and requirements ICT/-/1 BS ISO/IEC Reference architecture for sensor network applications and services. Vocabulary/terminology ICT/-/1 BS ISO/IEC Reference architecture for sensor network applications and services. Reference architecture views ICT/-/1 BS ISO/IEC Reference architecture for sensor network applications and services. Entity models ICT/-/1 BS ISO/IEC Reference architecture for sensor network applications and services. Interface definitions ICT/-/1 BS ISO/IEC Reference architecture for sensor network applications and services. Application profiles ICT/-/1 BS ISO/IEC Reference architecture for sensor network applications and services. Interoperability guidelines ICT/-/1 BS ISO Condoms. Guidance on clinical studies. General consideration for studies based on self-reports CH/157 Help Us to Help You! Always quote your Customer Number Don t know your number? Contact Customer Services who will be happy to check it for you Update Standards Sep 2010 Prices may be subject to change. 59

60 New Work Started continued... DD ISO/TS Agricultural machinery. Guards for moving parts of power transmission. Guard opening with tool AGE/32 PD IEC/TR (Revision) Effects of current on human beings and livestock. Effects of lightning strokes on human beings and livestock will supersede PD IEC/TR :2004 JPEL/64 PD IEC/TR (Revision) Optical fibres. Reliability. Power law theory will supersede PD IEC/TR 62048:2002 GEL/86/1 PD IEC/TR Guide to the installation of optical fibre cables GEL/86/1 PD ISO/TR (Revision) Environmental management. Life cycle impact assessment. Examples of application of ISO will supersede PD ISO/TR 14047:2003 SES/1/5 PD ISO/TR (Revision) Environmental management. Life cycle assessment. Examples of application of ISO to goal and scope definition and inventory analysis will supersede PD ISO/TR 14049:2000 SES/1/5 PD ISO/TR Information and documentation. Managing metadata for records. Self-assessment method IDT/2/17 BS IEC Electrical installations of buildings. Requirements for special installations or locations; Solar photovoltaic (PV) power supply systems JPEL/64 Please do not send confirmation of orders placed by telephone as it can lead to duplication DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT NATIONAL BRITISH STANDARDS You may now comment on any National British Standard online. BSI British Standards has launched a Draft Review system which allows access to the drafts of all National British Standards. To enhance access of Drafts for Public Comment for the wider community, make comments more visible and move into collaborative working practices, you will now be able to comment on any National British Standard by visiting All you need to do is register. This service is free of charge. Please note that the only standards available on this service are pure British Standards (National Standards e.g: BS XXXX). European and international documents are not included at this time. Deadlines for receipt of comments on each of the individual drafts can be found at The deadline for the following drafts is 31 October, 2010 unless otherwise stated. Should you wish to receive these drafts in hard copy format, they are available for a fee from BSI Customer Services (see How to order on page 2). 10/ DC BS 3247 Specification for salt for spreading on highways for winter maintenance B/510/21 10/ DC BS 8535 Railway applications. Wheelsets and bogies. Powered and non-powered axles with inboard bearings. Design method RAE/3 30 November, / DC BS Cylindrical helical springs made from round wire and bar. Guide to methods of specifying tolerances for hot coiled springs, and cold coiled springs not covered by BS EN General spring testing. Part 1. Compression springs FME/9/3 30 September, / DC BS 1134 Assessment of surface texture. Guidance and general information TDW/4 30 September, / DC BS 2A 241 AMD2 General requirements for steel protruding-head bolts of tensile strength 1250 MPa ( lbf/in 2 ) or greater. Specification ACE/12 30 September, / DC BS 8472 Methods for determining the oxobiodegradation and phytotoxicity of plastics PKW/0/-/1 30 September, / DC BS 2HR 505 Specification for nickel-chromiumiron- titanium-niobium-aluminium heatresisting alloy round wire for thread inserts with a maximum diameter of 2 mm (nickel base Cr 15.5, Fe 7.0, Ti 2.5, Nb/Ta 0.95, Al 0.70) ACE/61 30 September, / DC BS 2HR 506 Specification for nickel-chromiumcobalt- titanium-aluminium heat resisting alloy wire. softened (nickel base, Cr 19.5, Co 1.8, Ti 2.5, Al 1.5) ACE/61 30 September, / DC BS 4HR 601 Specification for nickel-chromiumtitanium-aluminium heat-resisting alloy bar and wire (maximum diameter or minor sectional dimension of 30 mm) for the manufacture of fasteners (nickel base, Cr 19.5, Ti 2.2, Al 1.4) ACE/61 30 September, / DC BS 2HR 650 Specification for high expansion heat-resisting steel bar and wire for the manufacture of bolts, studs, set screws and nuts (Ni 25.5, Cr 15, Ti 2, Mn 1.5, Mo 1.25, Si 0.7, V 0.3) (Limiting ruling section 20 mm) ACE/61 30 September, / DC BS 7195 AMD1 Guide for the prevention of corrosion of metals caused by vapours from organic materials PKW/0 10/ DC NA to BS EN UK National Annex to Eurocode 1. Actions on structures. Part 1-4: General actions. Wind actions B/525/1 30 September, Prices may be subject to change. Update Standards Sep 2010

61 DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT ADOPTIONS All Draft British Standards are available from BSI Customer Services (see How to order on page 2) Most drafts are charged at to members and to non-members. Larger draft documents are charged at a higher price according to the number of pages and are priced individually below. Comments are welcome and should be sent to Debbie Stead, Head of Committee Service Centre - Operations, BSI Head Office, 389 Chiswick High Road, London W4 4AL by 31 October, 2010 unless otherwise stated, to be considered by the BSI committee. Draft standards may be modified before adoption and issue as British Standards. 10/ DC BS EN Maritime navigation and radiocommunication equipment and systems. Automatic Identification systems (AIS). Part 2. Class A shipborne equipment of the universal Automatic Identification System (AIS). Operational and performance requirements, methods of test and required test results members, non-members EPL/80 10/ DC BS EN ISO 1302 AMD2 Geometrical Product Specifications (GPS). Indication of surface texture in technical product documentation TDW/4 10/ DC BS ISO Surface chemical analysis. Scanning-probe microscopy. Definition and calibration of the lateral resolution of a nearfield optical microscope CII/60 10/ DC BS EN ISO Dentistry. Compatibility testing. Part 1. Metal-ceramic systems CH/106/2 10/ DC BS EN Digital addressable lighting interface. Part 103. General requirements. Control devices CPL/34/3 10/ DC BS ISO Measurement of radioactivity in the environment. Air. Part 8. Radon-222 in buildings. Methodologies for initial and additional investigations NCE/2 10/ DC BS ISO Large yachts. Strength, weathertightness and watertightness of glazed openings. Part 1. Design criteria, materials, framing and testing of independent glazed openings SME/32/-/12 The comment date for the above document has now expired 10/ DC BS ISO Large yachts. Measurement and analysis of the visual appearance of coatings SME/32/-/12 12 September, / DC BS ISO Microbeam analysis. Electron backscatter diffraction. Measurement of average grain size CII/9 10/ DC BS EN ISO Diagrams for the chemical and petrochemical industry. Part 2. Graphical symbols TDW/4 10/ DC BS ISO 7970 Wheat (Triticum aestivum L.). Specification AW/4 10/ DC BS ISO Indoor air. Part 19. Sampling strategy for moulds EH/2/3 10/ DC BS EN ISO Environmental management systems. Guidelines for incorporating ecodesign SES/1/1 21 September, / DC BS ISO 3676 Packaging. Complete, filled transport packages and unit loads. Unit load dimensions PKW/0 10/ DC BS ISO 3394 Packaging. Complete, filled transport packages and unit loads. Dimensions of rigid rectangular packages PKW/0 10/ DC BS ISO Skin barrier for ostomy aids. Test methods CH/173/-/3 10/ DC BS ISO Lasers and laser-related equipment. Laser device. Minimum requirements for documentation CPW/172/9 30 November, / DC BS ISO Fire extinguishing media. Foam concentrates. Part 3. Specification for low expansion foam concentrates for top application to water-miscible liquids FSH/18/3 10/ DC BS ISO Indoor air. Part 28. Determination of odour emissions from building products using test chambers EH/2/3 10/ DC BS ISO Surface chemical analysis. Recording and reporting data in Auger electron spectroscopy (AES) CII/60 30 November, / DC BS ISO Surface chemical analysis. Recording and reporting data in X-ray photoelectron spectroscopy (XPS) CII/60 30 November, / DC BS ISO Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for cyclic bending fatigue of porous ceramics at room temperature RPI/13 10/ DC BS ISO Milk and milk products. Determination of the lipase activity of pregastric lipase preparation AW/5 10/ DC BS EN ISO Metallic and other inorganic coatings. Test method of cyclic heating for thermal-barrier coatings under temperature gradient STI/33 10/ DC BS ISO 3129 Wood. Sampling methods and general requirements for physical and mechanical testing of small clear wood specimens B/543 10/ DC BS ISO Road vehicles. Open test sequence exchange format (OTX). Part 1. General information and use cases AUE/16 10/ DC BS EN ISO Ophthalmic optics. Spectacle frames. Requirements and test methods CH/172/3 30 November, 2010 Update Standards Sep 2010 Prices may be subject to change. 61

62 Drafts British Standards for Public Comment continued... 10/ DC BS ISO 534 Paper and board. Determination of thickness, density and specific volume PAI/11 10/ DC BS ISO Lubricants, industrial oils and related products. Determination of the foaming and air release properties of industrial gear oils using a spur gear test rig. Flender foam test procedure PTI/13 3 November, / DC BS ISO Buildings and constructed assets. Service life planning. Part 2. Service life prediction procedures CB/101 6 December, / DC BS ISO Road vehicles. Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements. Part 3. Common message dictionary AUE/16 10/ DC BS EN ISO 2431 Paints and varnishes. Determination of flow time by use of flow cups STI/10 10/ DC BS ISO Indoor air. Part 4. Determination of formaldehyde. Diffusive sampling method EH/2/3 30 November, / DC BS ISO/IEC AMD1 Information technology. Multimedia framework (MPEG-21). Part 2. Digital Item Declaration IST/37 10/ DC PD ISO/IEC TR Information technology. Automatic identification and data capture techniques. Mobile item identification and management. Reference architecture for Mobile AIDC services IST/34 10/ DC BS ISO Active implantable medical devices. Electromagnetic compatibility. EMC test protocols for implantable cardiac pacemakers, implantable cardioverter defibrillators and cardiac resynchronization devices members, non-members CH/150/6 26 November, / DC BS ISO 8854 Road vehicles. Alternators with regulators. Test methods and general requirements AUE/16 10/ DC BS EN Railway applications. Design requirements for steps, handrails and associated staff access. Part 1. Passenger vehicles, luggage vans and locomotives RAE/1/-/2 30 November, / DC BS EN Railway applications. Design requirements for steps, handrails and associated staff access. Part 2. Freight wagons RAE/1/-/9 30 November, / DC BS ISO Road vehicles. Diagnostic communication over Controller Area Network (DoCAN). Part 1. General information and use case definition AUE/16 10/ DC BS ISO Road vehicles. Diagnostic communication over Controller Area Network (DoCAN). Part 2. Transport protocol and network layer services AUE/16 10/ DC BS ISO 20643/CD AMD1 Mechanical vibration. Hand-held and hand-guided machinery. Principles for evaluation of vibration emission MCE/8/-/2 10/ DC BS ISO Indexable inserts for cutting tools. Ceramic inserts with rounded corners. Part 2. Dimensions of inserts with cylindrical fixing hole MTE/18 10/ DC BS ISO Trenchless applications of ductile iron pipes systems. Product design and installation PSE/10 10/ DC BS EN ISO Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM). Part 9. CMMs with multiple probing systems TDW/4 10/ DC BS EN Non-self-ballasted LED lamps. Part 1. Safety requirements CPL/34/1 The comment date for the above document has now expired 10/ DC BS ISO Measurement of ride quality. Part 1. Lifts (elevators) MHE/4 10/ DC BS EN ISO Vegetable oils. Determination of the deterioration of bleachability index (DOBI) and carotene content AW/307 10/ DC BS EN Methods of test for masonry units. Part 1. Determination of compressive strength B/ September, / DC BS EN ISO Mechanical properties of fasteners made of carbon steel and alloy steel. Part 5. Set screws and similar threaded fasteners with specified hardness classes. Coarse thread and fine pitch thread FME/9/1 The comment date for the above document has now expired 10/ DC BS EN LPG equipment and accessories. Inspection and testing of LPG road tankers PVE/19 10/ DC BS ISO/IEC Integrated circuit cards. Enhanced Terminal Accessibility using cardholder preference interface IST/17 27 September, / DC BS EN High availability automation networks. Part 7. Ring-based Redundancy Protocol (RRP) AMT/7 15 September, / DC BS EN 741 AMD1 Continuous handling equipment and systems. Safety requirements for systems and their components for pneumatic handling of bulk materials MHE/9 17 September, / DC BS EN Vitrified clay pipes systems for drains and sewers Part 6. Requirements for components of manholes and inspection chambers B/505 10/ DC BS EN 1338 Concrete paving blocks. Requirements and test methods B/ November, Prices may be subject to change. Update Standards Sep 2010

63 10/ DC BS EN 1339 Concrete paving flags. Requirements and test methods B/ November, / DC BS EN 1340 Concrete kerb units. Requirements and test methods B/ November, / DC BS EN Child use and care articles. Chair mounted seat CW/1/5 29 October, / DC BS EN Solid biofuels. Determination of total content of carbon, hydrogen and nitrogen. Instrumental methods PTI/17 10/ DC BS EN Heating systems in buildings. Method for calculation of system energy requirements and system efficiencies. Part 4-8. Space heating generation systems, air heating and overhead radiant heating systems RHE/24 10/ DC BS EN AMD1 Child use and care articles. Soother holder. Safety requirements and test methods CW/1/4 10/ DC BS ISO 1125 AMD1 Rubber compounding ingredients. Carbon black. Determination of ash PRI/50 10/ DC BS ISO Fire detection and alarm systems. Part 11. Manual call points FSH/12/2 8 October, / DC BS EN Gas-fired heating boilers. Part 1. General requirements and tests members, non-members GSE/29 10/ DC BS EN Cranes. Bridge and gantry cranes MHE/3/3 29 October, / DC BS ISO AMD1 Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems. Part 3. Field joint coatings PSE/17/2 10/ DC BS EN Non-domestic storage furniture. Test methods for the determination of strength, durability and stability FW/0/2 2 November, / DC BS EN 673 Glass in building. Determination of thermal transmittance (U value). Calculation method B/520/4 17 November, / DC BS EN Solid biofuels. Determination of the water soluble chloride, sodium and potassium content PTI/17 10/ DC BS EN ISO AMD1 Microbiology of food and animal feeding stuffs. Preparation of test samples, initial suspension and decimal dilutions for microbiological examination. Part 4. Specific rules for the preparation of products other than milk and milk products, meat and meat products, and fish and fishery products AW/9 1 November, / DC BS ISO AMD2 Mechanical vibration. Laboratory method for evaluating vehicle seat vibration. Part 1. Basic requirements GME/21/6 30 September, / DC BS EN 1113 AMD1 Sanitary tapware. Shower hoses for sanitary tapware for water supply systems of type 1 and type 2. General technical specification B/ November, / DC BS EN Characterization of waste. Guidance on selection and application of screening methods B/508/3 10/ DC BS ISO Bicycle tyres and rims. Part 1. Tyre designations and dimensions GME/25 10/ DC BS EN LPG equipment and accessories. Refuelling installations at private and industrial premises PVE/19 10/ DC BS EN LPG equipment and accessories. Construction and performance of LPG equipment for automotive filling stations. Part 1. Dispensers PVE/19 10/ DC BS EN Solid biofuels. Determination of particle size distribution of disintegrated pellets PTI/17 10/ DC BS EN Solid biofuels. Determination of length and diameter of pellets PTI/17 10/ DC BS EN Leak detection systems. Part 1. General Principles PVE/393/2 10/ DC BS EN Leak detection systems. Part 3. Liquid systems for tanks PVE/21/2/2 10/ DC BS EN Specification for the performance of automatic tank contents gauges PVE/393/5 10/ DC BS EN Cold rolled low carbon steel flat products for vitreous enamelling. Technical delivery conditions ISE/109 10/ DC BS EN 410 Glass in building. Determination of luminous and solar characteristics of glazing B/520/4 17 November, / DC BS EN Reference test method for release of nickel from those parts of spectacle frames and sunglasses intended to come into close and prolonged contact with the skin CH/172/3 10/ DC BS EN 834 Heat cost allocators for the determination of the consumption of room heating radiators. Appliances with electrical energy supply CPI/30 Update Standards Sep 2010 Prices may be subject to change. 63

64 Drafts British Standards for Public Comment continued... 10/ DC BS ISO Societal security. Emergency management. Requirements for command and control SSM/1 The comment date for the above document has now expired 10/ DC BS EN 71-8 Safety of toys. Part 8. Swings, slides and similar activity toys for indoor and outdoor family domestic use CW/15 15 November, / DC BS EN Fibre optic interconnecting devices and passive components. Fibre optic connector optical interfaces. Part Optical interface, 8 degrees angled PC, polyphenylene sulphide rectangular ferrule, single mode fibres GEL/86/2 15 September, / DC BS EN Fibre optic interconnecting devices and passive components. Fibre optic connector optical interfaces. Part Optical interface, 8 degrees angled PC, thermoset epoxy rectangular ferrule, single mode fibres GEL/86/2 15 September, / DC BS EN Pressure equipment. Part 2. Quantities, symbols and units PVE/1 10/ DC BS EN Performance of portable leak detectors and of room monitors for halogenated refrigerants RHE/18 10/ DC BS ISO Freight containers. RFID cargo shipment tag system TW/1 10/ DC BS EN Specification for radio disturbance and immunity measuring apparatus and methods. Part 1-6. Radio disturbance and immunity measuring apparatus. EMC-antenna calibration GEL/210/12 10/ DC BS EN Household and similar electrical appliances. Test code for the determination of airborne acoustical noise. Part Particular requirements for electric cooking ranges, ovens, grills, microwave ovens and any combination of these CPL/59 19 November, / DC BS EN ISO Thermal performance of buildings and materials. Determination of specific airflow rate in buildings. Tracer gas dilution method B/540/8 3 November, / DC BS EN Aerospace series. Circuit breakers, three-pole, temperature compensated, rated current 20 A to 50 A. Part 001. Technical specification ACE/6 1 October, / DC BS EN Aerospace series. Circuit breakers, three-pole, temperature compensated, rated current 20 A to 50 A. Part 004. Without signal contact. Product standard ACE/6 1 October, / DC BS EN Aerospace series. Circuit breakers, single-pole, temperature compensated, rated current 20 A to 50 A. Part 001. Technical specification ACE/6 1 October, / DC BS EN Aerospace series. Circuit breakers, single-pole, temperature compensated, rated current 20 A to 50 A. Part 004. Without signal contact. Product standard ACE/6 1 October, / DC BS EN Aerospace series. Circuit breakers, single-pole, temperature compensated, rated current 1 A to 25 A. Part 001. Technical specification ACE/6 1 October, / DC BS EN Aerospace series. Circuit breakers, single-pole, temperature compensated, rated current 1 A to 25 A. Part 004. Without signal contact. Product standard ACE/6 1 October, / DC BS EN Aerospace series. Circuit breakers, three-pole, temperature compensated, rated current 1 A to 25 A. Part 001. Technical specification ACE/6 1 October, / DC BS EN Aerospace series. Circuit breakers, three-pole, temperature compensated, rated current 1 A to 25 A. Part 004. Without signal contact. Product standard ACE/6 1 October, / DC BS EN ISO Welding consumables. Wire electrodes and deposits for gas shielded metal arc welding of non alloy and fine grain steels. Classification WEE/39 10/ DC BS EN ISO 3580 Welding consumables. Covered electrodes for manual metal arc welding of creep-resisting steels. Classification WEE/39 1 November, / DC BS EN Environmental testing. Part Tests. Test Cab. Damp heat, steady state GEL/104 10/ DC BS EN Low-voltage electrical installations. Part Requirements for special installations or locations. Photovoltaic (PV) power systems JPEL/64 30 September, / DC BS EN Semiconductor devices. Part 3. Signal (including switching diodes) and regulator diodes EPL/47 The comment date for the above document has now expired 10/ DC BS EN Measuring relays and protection equipment. Part 24. Common format for transient data exchange (COMTRADE) for power systems PEL/95 10 September, / DC BS EN Fibre organisers and closures to be used in optical fibre communication systems. Product specifications. Part 3-1. Fibre management system, splice wall box, for category C & G GEL/86/2 10/ DC BS EN Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. Part Type LF3 APC simplex terminated on IEC category B1.1 and B1.3 single mode fibre with titanium composite ferrule for Category C GEL/86/2 64 Prices may be subject to change. Update Standards Sep 2010

65 10/ DC PD CISPR/TR 31 AMD1 Database on the characteristics of radio services GEL/210/12 10/ DC BS EN Coaxial communication cables. Part 5. Sectional specification for CATV trunk and distribution cables EPL/46 The comment date for the above document has now expired 10/ DC BS EN Coaxial communication cables. Part 5-1. Blank detail specification for CATV trunk and distribution cables EPL/46 The comment date for the above document has now expired 10/ DC BS EN Coaxial communication cables. Part RF Power Rating EPL/46 The comment date for the above document has now expired 10/ DC BS EN Semiconductor devices. Microelectromechanical systems. Part 14. Forming limit measuring method of metallic film materials EPL/47 The comment date for the above document has now expired 10/ DC BS EN Live working. Saddles, stick clamps and their accessories PEL/78 The comment date for the above document has now expired 10/ DC BS EN Safety requirements for electrical equipment for measurement, control, and laboratory use. Part Particular requirements for industrial-process measurement, control and automation equipment, specifically control equipment (excluding functional safety) GEL/65 The comment date for the above document has now expired 10/ DC BS EN AMD1 Plastic films for electrical purposes. Part 3. Specification for individual materials. Sheet 1. Biaxially oriented polypropylene (PP) films for capacitors GEL/15 1 November, / DC BS ISO Aircraft. De-icing/anti-icing methods on the ground ACE/57 10/ DC BS EN AMD2 Specification for radio disturbance and immunity measuring apparatus and methods. Part 1-5. Radio disturbance and immunity measuring apparatus. Antenna calibration test sites for 30 MHz to MHz GEL/210/12 10/ DC BS EN AMD2 Discharge lamps (excluding fluorescent lamps). Safety specifications CPL/34/1 The comment date for the above document has now expired 10/ DC BS EN Packaging of components for automatic handling. Part 4. Stick magazines for electronic components encapsulated in packages of form E and G EPL/40X 15 September, / DC BS EN Active implantable medical devices. Part 1. General requirements for safety, marking and information to be provided by the manufacturer CH/150/6 17 November, / DC BS EN Photovoltaic (PV) module performance testing and energy rating. Part 2. Spectral response, incidence angle and module operating temperature measurements GEL/82 10/ DC BS EN Radio-frequency connectors. Part 44. Sectional specification for SMP series RF coaxial connectors EPL/46 The comment date for the above document has now expired Help Us to Help You! Always quote your Customer Number Don t know your number? Contact Customer Services who will be happy to check it for you 10/ DC BS EN High-voltage plugs, socketoutlets and ship couplers for high-voltage shore connection systems (HVSC-SYSTEMS). Part 1. General requirements PEL/23/4 10/ DC BS EN Optical fibres. Part Product specifications. Sectional specification for class B single-mode fibres GEL/86/1 1 October, / DC BS EN Power transformers. Part 3. Insulation levels, dielectric tests and external clearances in air PEL/14 17 September, / DC BS EN High-voltage switchgear and controlgear. Part 207. Seismic qualification for gas-insulated switchgear assemblies for rated voltages above 52 kv PEL/17/1 1 October, / DC PD CEN/TR Characterisation of waste. Onsite verification B/508/3 30 September, / DC BS ISO/IEC AMD2 Information technology. Multimedia framework (MPEG-21). Part 4. Intellectual Property Management and Protection Components IST/37 10/ DC BS EN Electrical and instrumentation loop check AMT/7 30 November, / DC BS EN AMD1 Electrical accessories. Circuit breakers for overcurrent protection for household and similar installations. Part 1. Circuit-breakers for a.c. operation PEL/23/1 30 November, / DC BS EN AMD1 Switches for household and similar fixed-electrical installations. Part 1. General requirements PEL/23 30 November, 2010 Update Standards Sep 2010 Prices may be subject to change. 65

66 Drafts British Standards for Public Comment continued... 10/ DC BS EN Automation systems in the process industry. Factory acceptance test (FAT), site acceptance test (SAT), and site integration test (SIT) AMT/7 30 November, / DC BS EN Commissioning of electrical, instrumentation and control systems in the process industry. Specific phases and milestones AMT/7 30 November, / DC BS EN Fibre optic interconnecting devices and passive components. Fibre optic connector product specifications. Part 1-1. LC-PC duplex multi mode connectors terminated on IEC category A1a and A1b fibre GEL/86/2 15 September, / DC BS EN Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces. Part 4. Type SC connector family GEL/86/2 15 September, / DC BS EN Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces. Part 6. Type MU connector family GEL/86/2 15 September, 2010 EN Influence of metallic materials on water intended for human consumption. Method to evaluate the passive behaviour of stainless steels EN Influence of metallic materials on water intended for human consumption. Determination of residual surface lead (Pb). Extraction method The above two draft standards were circulated for comment (to the responsible BSI committee) in April The deadline for comment for these drafts has now closed. The UK voted positively (with comments) for both these draft standards in June Contact: Charlotte Armstrong EH/6 ISO Gas welding equipment. Marking for equipment used for gas welding, cutting and allied processes This standard has been circulated as DIS for the second time. The draft is available from the Programme Manager (below). Voting terminates on 10 September, Contact: Sarah Meagher WEE/18 ISO Plastics. Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD). Requirements and test methods The above mentioned standard has not been issued as a Draft for Public Comment. Copies are available on request from the contact point (below). Contact: Committee Service Centre csc@bsigroup.com PRI/75 CEN/CENELEC UNIQUE ACCEPTANCE PROCEDURE Comments can be sent by or by post to named contacts at:- BSI Head Office 389 Chiswick High Road London W4 4AL Tel: pren ISO 4063 ((ISO 4063:2009, Corrected version )) Welding and allied processes. Nomenclature of processes and reference numbers This document, which will not be issued as a Draft for Public Comment is identical to ISO 4063:2009 Corrected version It has been circulated to CEN members for voting by 22 October, Contact: Sarah Meagher sarah.meagher@bsigroup.com WEE/1 CEN EUROPEAN STANDARDS EUROPEAN RATIFIED TEXTS The documents listed below have recently been issued by CEN but have not yet been published as BS ENs. BSI has an obligation to adopt all ENs and to withdraw any conflicting British Standards (BSs) or parts of BSs. The following will be implemented as BS ENs or as amendments to BS ENs shortly. Notification of their implementation will be given in the BS EN Publications section of the edition of Update Standards. EN :2008+A1:2010 Domestic cooking appliances burning gas. Safety. General GSE/35 DOCUMENTS NOT ISSUED AS DPCs Comments can be sent by or by post to named contacts at:- BSI Head Office 389 Chiswick High Road London W4 4AL Tel: EN ISO Electronic fee collection. Information exchange between service provision and toll charging ISO Forced draught oil burners This standard has been circulated as an FDIS. Copies are available on request from the contact point (below). Contact: Committee Service Centre csc@bsigroup.com GSE/27 EN 115-2:2010 Safety of escalators and moving walks. Rules for the improvement of safety of existing escalators and moving walks MHE/4 EN 354:2010 Personal fall protection equipment. Lanyards PH/5 EN 530:2010 Abrasion resistance of protective clothing material. Test methods PH/3/5 The above draft has been issued for DIS ballot. Copies are available upon request from the contact point (below) Contact: Alex Price alex.price@bsigroup.com EPL/278 British Standards Online at EN 659: Protective gloves for firefighters CORRIGENDUM 1:June 2009 to EN 659:2003+A1:2008 PH/3/8 66 Prices may be subject to change. Update Standards Sep 2010

67 EN 709:1997+A4:2009 Agricultural and forestry machinery. Pedestrian controlled tractors with mounted rotary cultivators, motor hoes, motor hoes with drive wheel(s). Safety AGE/20 EN 809: Pumps and pump units for liquids. Common safety requirements CORRIGENDUM 1:July 2010 to EN 809:1998+A1:2009 MCE/6 EN :2010 Advanced technical ceramics. Ceramic composites. Methods of test for reinforcements. Determination of the distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at high temperature RPI/13 EN :2006+A1:2010 Safety of machinery. Safety requirements for the design and construction of printing and paper converting machines. Printing and varnishing machines including pre-press machinery MCE/3/9 EN 1247:2004+A1:2010 Foundry machinery. Safety requirements for ladles, pouring equipment, centrifugal casting machines, continuous and semi continuous casting machines MCE/3/10 EN :2010 Road restraint systems. Terminology and general criteria for test methods B/509/1 EN :2010 Road restraint systems. Performance classes, impact test acceptance criteria and test methods for safety barriers including vehicle parapets B/509/1 EN :2010 Road restraint systems. Performance classes, impact test acceptance criteria and test methods for crash cushions B/509/1 EN 1493:2010 Vehicle lifts MHE/12/-/3 EN 1533:2010 Wood flooring. Determination of bending strength under static load. Test methods B/543 EN :2010 Patient handling equipment used in road ambulances. Specification for general stretcher systems and patient handling equipment CH/239 EN :2010 Patient handling equipment used in road ambulances. Power assisted atretcher CH/239 EN 1938:2010 Personal eye protection. Goggles for motorcycle and moped users PH/2 EN 3264:2010 Aerospace series. Pipe coupling 8 30 in titanium alloy. Thrust wire nuts ACE/12 EN :2010 Aerospace series. Cables, electrical, aircraft use. Test methods. Corona extinction voltage ACE/6 EN :2010 Aerospace series. Cables, electrical, aircraft use. Test methods. Resistance to dry arc propagation ACE/6 EN :2010 Aerospace series. Cables, electrical, aircraft use. Test methods. Wet short circuit test ACE/6 EN 3719:2010 Aerospace series. Aluminium or aluminium alloy conductors for electrical cables. Product standard ACE/6 EN :2000+A1:2010 Builders hoists for goods. Hoists with accessible platforms MHE/6 EN :2000+A1:2010 Builders hoists for goods. Inclined hoists with non-accessible load carrying devices MHE/6 EN :2010 Testing fresh concrete. Self-compacting concrete. Slump-flow test B/517/1 EN :2010 Testing fresh concrete. Self-compacting concrete. V-funnel test B/517/1 EN :2010 Testing fresh concrete. Self-compacting concrete. L-box test B/517/1 EN :2010 Testing fresh concrete. Self-compacting concrete. Sieve segregation test B/517/1 EN :2010 Testing fresh concrete. Self-compacting concrete. J-ring test B/517/1 EN 12542:2010 LPG equipment and accessories. Static welded steel cylindrical tanks, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greaterthan 13 m 3. Design and manufacture PVE/19 EN :2010 Bituminous mixtures. Test methods for hot mix asphalt. Determination of the ash content of natural asphalts B/510/1 EN :2010 Copper and copper alloys. Seamless, round copper tubes for air conditioning and refrigeration. Tubes for piping systems NFE/34/1 EN :2010 Copper and copper alloys. Seamless, round copper tubes for air conditioning and refrigeration. Tubes for equipment NFE/34/1 EN :2010 Ventilation for buildings. Performance testing of components/products for residential ventilation. Exhaust and supply air terminal devices RHE/2 EN 13309:2010 Construction machinery. Electromagnetic compatibility of machines with internal power supply B/513 EN :2006+A1:2010 Railway applications. Track. Rail. Switch and crossing rails used in conjunction with Vignole railway rails 46 kg/m and above RAE/2 EN :2006+A1:2010 Railway applications. Track. Rail. Check rails RAE/2 EN 13823:2010 Reaction to fire tests for building products. Building products excluding floorings exposed to the thermal attack by a single burning item FSH/21/7 EN 13941:2009+A1:2010 Design and installation of preinsulated bonded pipe systems for district heating RHE/9 EN 14516:2006+A1:2010 Baths for domestic purposes B/503 Update Standards Sep 2010 Prices may be subject to change. 67

68 CEN European Standards continued... EN 14527:2006+A1:2010 Shower trays for domestic purposes B/503 EN :2006+A1:2010 Railway applications. Track. Aluminothermic welding of rails. Approval of welding processes RAE/2 EN :2010 Copper and copper alloys. Determination of bismuth content. Flame atomic absorption spectrometric method (FAAS) NFE/34 EN 14974:2006+A1:2010 Facilities for users of roller sports equipment. Safety requirements and test methods SW/65 EN 14975:2006+A1:2010 Loft ladders. Requirements, marking and testing B/512 EN :2010 Copper and copper alloys. Determination of nickel content. Flame atomic absorption spectrometric method (FAAS) NFE/34 EN 15025:2010 Copper and copper alloys. Determination of magnesium content. Flame atomic absorption spectrometric method (FAAS) NFE/34 EN :2010 Copper and copper alloys. Determination of tellurium content Medium tellurium content. Flame atomic absorption spectrometric method (FAAS) NFE/34 CEN TECHNICAL SPECIFICATIONS CEN/TS 14464:2010 Sawn timber. Method for assessment of casehardening B/543 CENELEC PUBLICATIONS EUROPEAN RATIFIED TEXTS The documents listed below have recently been issued by CENELEC but have not yet been published as BS ENs. BSI has an obligation to adopt all ENs and to withdraw any conflicting British Standards (BSs) or parts of BSs. The following will be implemented as BS ENs or as amendments to BS ENs shortly. Notification of their implementation will be given in the BS EN Publications section of the edition of Update Standards. EN 50160:2010 Voltage characteristics of electricity supplied by public electricity networks GEL/8 EN 55011: (CISPR 11:2009/A1:2010) Industrial, scientific and medical equipment. Radio-frequency disturbance characteristics. Limits and methods of measurement AMENDMENT 1:July 2010 to EN 55011:2010 GEL/210/11 EN : (IEC :2003/A2:2010) Miniature fuses. Cartridge fuse-links AMENDMENT 2:July 2010 to EN :2003 PEL/32 EN :2010 (IEC :2009) Semiconductor converters. General requirements and line commutated converters. Specification of basic requirements PEL/22 EN :2010 (IEC :2010) Sound system equipment. Microphones EPL/100 EN : Household and similar electrical appliances. Safety. General requirements AMENDMENT 14:July 2010 to EN :2002 CPL/61 EN 15365:2010 Advanced technical ceramics. Mechanical properties of ceramic fibres at high temperature in a non-reactive environment. Determination of creep behaviour by the cold end method RPI/13 EN 15605:2010 Copper and copper alloys. Inductively coupled plasma optical emission spectrometry NFE/34 EN 15878:2010 Steel static storage systems. Terms and definitions MHE/8 EN 15907:2010 Film identification. Enhancing interoperability of metadata. Element sets and structures CPW/36 EN 15915:2010 Copper and copper alloys. Determination of silver content. Flame atomic absorption spectrometric method (FAAS) NFE/34 EN 50181:2010 Plug-in type bushings above 1 kv up to 52 kv and from 250 A to 2,50 ka for equipment other than liquid filled transformers PEL/36 EN :2010 Industrial communications subsystem based on ISO (CAN) for controller-device interfaces. Functional safety communication based on EN AMT/7 EN 50498:2010 Electromagnetic compatibility (EMC). Product family standard for aftermarket electronic equipment in vehicles GEL/210/11 British Standards Online at EN :2010 (IEC :2010) Connectors for electronic equipment. Tests and measurement. Fire hazard tests. Test 20a: Flammability, needle-flame EPL/48 EN :2010 (IEC :2010) Connectors for electronic equipment. Tests and measurements. Fire hazard tests. Test 20c:Flammability, glow-wire EPL/48 EN :2010 (IEC :2010) Connectors for electronic equipment. Tests and measurements. R.F. resistance tests. Test 21a. R.F. shunt resistance EPL/48 EN :2010 (IEC :2010) Connectors for electronic equipment. Tests and measurements. Capacitance tests. Test 22a. Capacitance EPL/48 68 Prices may be subject to change. Update Standards Sep 2010

69 New standard BS :2010 Stairs. Code of practice for the design of stairs with straight flights and winders In the UK, there are over 500 deaths each year from stair related accidents in the home. It is estimated that a further non-fatal accidents take place on stairs in the home each year. These accidents are serious enough to cause the victim to visit their General Practitioner (GP) or Hospital Accident and Emergency department. This is equivalent to a domestic accident on stairs occurring every 2.5 minutes. In addition, there are approximately accidents on stairs in leisure environments and a further plus in the workplace. This is equivalent to a fall on stairs in the UK occurring every 90 seconds. The most important aspects of stair design that affects the safety of users are the tread dimensions. If a going is too small to easily place a significant proportion of the foot upon, it increases the likelihood of an overstep. Research suggests that large oversteps, coupled with the type of material on the stair nosing, can lead to a slip in descent. If there are no suitable handrails, or the person cannot reach them in time, this slip can lead to a serious incident. It is therefore important that stairs are designed and constructed to enable use by people with as wide range of ability as practical. BS is a code of practice that gives recommendations for the design of stairs with straight flights, including landings and winders for all types of building and industrial walkways. The standard also takes account of the ability to use steps as this can vary significantly. BS replaces BS :2000, which is now withdrawn. To subscribe visit or contact BSI Customer Services quoting marketing reference code 5395J-U Tel +44 (0) Fax +44 (0) orders@bsigroup.com raising standards worldwide Standards and publications may also be ordered via the BSI shop at *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0) BSI British Standards Institution 2010

70 CENELEC Publications continued... EN :2010 (IEC :2010) Connectors for electronic equipment. Detail specification for 8-way, shielded, free and fixed connectors, for data transmission with frequencies up to 100 MHz EPL/48 EN :2010 (IEC :2010) Connectors for electronic equipment. Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz EPL/48 EN :2010 (IEC :2010) Connectors for electronic equipment. Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz EPL/48 EN 60666:2010 (IEC 60666:2010) Detection and determination of specified additives in mineral insulating oils GEL/10 EN :2010 (IEC :2010) Flexible insulating sleeving. Specifications for individual types of sleeving Sheet 209: Heatshrinkable polyolefin sleeving, general purpose, flame retarded GEL/15 EN :2010 (IEC :2010) Fire hazard testing. Toxicity of fire effluent. General guidance GEL/89 EN :2010 (IEC :2010) Optical fibre cables. Outdoor cables. Product specification for duct, directly buried and lashed aerial single-mode optical fibre telecommunication cables GEL/86/1 EN : (IEC :2006/A1:2010) Electromagnetic compatibility (EMC). Testing and measurement techniques. Damped oscillatory wave immunity test AMENDMENT 1:July 2010 to EN :2007 GEL/210/12 EN :2010 (IEC :2010) Connectors for electronic equipment. Product requirements. Rectangular connectors. Detail specification for a 4 pole + PE power connector with push-pull coupling EPL/48 EN : (IEC :2008/A1:2010) Maritime navigation and radiocommunication equipment and systems. Digital interfaces. Serial data instrument network AMENDMENT 1:July 2010 to EN :2008 EPL/80 EN :2010 (IEC :2010) Expression of performance of gas analyzers. General GEL/65/2 EN :2010 (IEC :2010) Wind turbines. Lightning protection PEL/88 EN :2010 (IEC :2010) Safety of transformers, reactors, power supply units and combinations thereof. Particular requirements and tests for transformer for shavers, power supply units for shavers and shaver supply units PEL/96 EN :2010 (IEC :2010) Fibre optic interconnecting devices and passive components. Performance standards. Simplex and duplex cords with singlemode fibre and cylindrical ferruleconnectors for category C. Controlled environment GEL/86/2 EN :2010 (IEC :2010) Fibre optic interconnecting devices and passive components. Performance standard. Simplex and duplex cords with single-mode fibre and cylindrical ferrule connectors for category U. Uncontrolled environment GEL/86/2 EN :2010 (IEC :2010) Superconductivity. Superconducting power devices. General requirements for characteristic tests of current leads designed for powering superconducting devices L/-/90 EN :2010 (IEC :2010) Safety of power converters for use in photovoltaic power systems. General requirements GEL/82 EN :2010 (IEC :2010) Ferrite cores. Dimensions. Pot-cores for use in telecommunications, power supply, and filter applications EPL/51 EN :2010 (IEC :2010) Heat-shrinkable moulded shapes. Specification requirements for shape dimensions, material requirements and compatibility performance. Sheet 100. Heat-shrinkable moulded shape dimensions GEL/15/5 EN 62418:2010 (IEC 62418:2010) Semiconductor devices. Metallization stress void test EPL/47 EN 62514:2010 (IEC 62514:2010) Multimedia gateway in home networks. Guidelines EPL/100 EN 62537:2010 (IEC 62537:2010) Interface for loudspeakers with digital input signals based on IEC EPL/100 CENELEC REPORTS CLC/TR :2010 Alcohol interlocks. Test methods and performance requirements Guidance for decision makers, purchasers and users AUE/16 CENELEC TECHNICAL SPECIFICATIONS CLC/TS :2010 Alarm systems. Intrusion and hold-up systems. Application guidelines GW/1/2 CLC/TS :2010 Railway applications. Compatibility between rolling stock and train detection systems. Compatibility with track circuits GEL/9/1 CLC/TS :2010 Railway applications. Compatibility between rolling stock and train detection systems. Compatibility with axle counters GEL/9/1 70 Prices may be subject to change. Update Standards Sep 2010

71 HARMONIZATION DOCUMENTS HD :2010 (IEC :2007) Low-voltage electrical installations. Protection for safety. Protection against voltage disturbances and electromagnetic disturbances members, non-members JPEL/64 Incorporating corrigendum July:2010 IEC PUBLICATIONS It is BSI policy to supply the UK version of all adopted standards, which are published as British standards, unless otherwise requested. The following IEC publications are available from BSI Customer Services (see How to order on page 2) IEC/TS :2010 (Edition 2) Rotating electrical machines Functional evaluation of insulation systems. Test procedures for form-wound windings. Multifactor evaluation by endurance under simultaneous thermal and electrical stresses members, non-members PEL/2 IEC 60065: Audio, video and similar electronic apparatus. Safety requirements AMENDMENT 2:July 2010 to IEC 60065: members, non-members EPL/108 IEC :1997 (Edition 1.1) Specifications for particular types of winding wires. Polyester-amide-imide enamelled round copper wire, class members, non-members Consolidated version incorporating Amendment 1 IEC :1997 (Edition 1.1) Specifications for particular types of winding wires. Aromatic polyimide tape wrapped round copper wire, class members, non-members Consolidated version incorporating Amendment 1 To order visit IEC : Household and similar electrical appliances. Safety. Particular requirements for commercial microwave ovens AMENDMENT 1:July 2010 to IEC : members, non-members CPL/61/7 IEC 60462:2010 (Edition 2) Nuclear instrumentation. Photomultiplier tubes for scintillation counting. Test procedures members, non-members NCE/2 IEC : Directly heated negative temperature coefficient thermistors. Sectional specification. Surface mount negative temperature coefficient thermistors AMENDMENT 1:July 2010 to IEC : members, non-members EPL/40X IEC :2010 (Edition 2) Controllers with analogue signals for use in industrial-process control systems. Guidance for inspection and routine testing members, non-members GEL/65/2 IEC :2010 (Edition 5) Hand-held motor-operated electric tools. Safety. Particular requirements for circular saws members, non-members CPL/116 IEC : Semiconductor devices. Mechanical and climatic test methods. Die shear strength AMENDMENT 1:July 2010 to IEC : members, non-members EPL/47 IEC : Semiconductor devices. Mechanical and climatic test methods. Flammability of plasticencapsulated devices (externally induced) AMENDMENT 1:July 2010 to IEC : members, non-members EPL/47 IEC :2010 (Edition 2) Transmitters for use in industrial-process control systems. Methods for performance evaluation members, non-members GEL/65/2 IEC :2010 (Edition 3) Passive filter units for electromagnetic interference suppression. Generic specification members, non-members EPL/40X IEC :2010 (Edition 3) Arc welding equipment. Electrode holders members, non-members WEE/6 IEC :2010 (Edition 5) Industrial communication networks. Fieldbus specifications. Physical layer specification and service definition members, non-members AMT/7 IEC :2010 (Edition 2) Industrial communication networks. Fieldbus specifications. Data-link layer service definition. Type 12 elements members, non-members AMT/7 IEC : Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Fibre optic connector endface visual and automated inspection CORRIGENDUM 1:June 2010 to IEC :2009 GEL/86/2 IEC : Lamp controlgear. General and safety requirements AMENDMENT 1:July 2010 to IEC : members, non-members CPL/34/3 IEC 61526:2010 (Edition 3) Radiation protection instrumentation. Measurement of personal dose equivalents Hp(10) and Hp(0,07) for X, gamma, neutron and beta radiations. Direct reading personal dose equivalent meters members, non-members NCE/2 IEC :2010 (Edition 2) Safety of transformers, reactors, power supply units and combinations thereof. Particular requirements and tests for transformers and power supply units for bells and chimes members, non-members PEL/96 Update Standards Sep 2010 Prices may be subject to change. 71

72 IEC Publications continued... IEC 61591: Household range hoods and other cooking fume extractors. Methods for measuring performance AMENDMENT 2:July 2010 to IEC 61591: members, non-members CPL/59 IEC :2010 (Edition 3) Industrial communication networks. Profiles. Fieldbus profiles members, non-members AMT/7 IEC :2010 (Edition 2) Industrial communication networks. Profiles. Additional fieldbus profiles for real-time networks based on ISO/IEC members, non-members AMT/7 IEC :2010 (Edition 2) Industrial communication networks. Profiles. Installation of fieldbuses. Installation profiles for CPF members, non-members AMT/7 IEC :2010 (Edition 2) Industrial communication networks. Profiles. Installation of fieldbuses. Installation profiles for CPF members, non-members AMT/7 IEC :2010 Industrial communication networks. Profiles. Installation of fieldbuses. Installation profiles for CPF members, non-members AMT/7 IEC :2010 (Edition 2) Industrial communication networks. Profiles. Installation of fieldbuses. Installation profiles for CPF members, non-members AMT/7 IEC :2010 (Edition 2) Industrial communication networks. Profiles. Installation of fieldbuses. Installation profiles for CPF members, non-members AMT/7 IEC :2010 (Edition 2) Industrial communication networks. Profiles. Installation of fieldbuses. Installation profiles for CPF members, non-members AMT/7 IEC :2010 Industrial communication networks. Profiles. Installation of fieldbuses. Installation profiles for CPF members, non-members AMT/7 IEC :2010 Industrial communication networks. Profiles. Installation of fieldbuses. Installation profiles for CPF members, non-members AMT/7 IEC :2010 Industrial communication networks. Profiles. Installation of fieldbuses. Installation profiles for CPF members, non-members AMT/7 IEC 61918:2010 (Edition 2) Industrial communication networks. Installation of communication networks in industrial premises members, non members AMT/7 IEC :2010 (Edition 3) Specification for the testing of balanced and coaxial information technology cabling. Cords as specified in ISO/IEC and related standards members, non-members EPL/46 IEC :2010 Application integration at electric utilities. System interfaces for distribution management. Common information model (CIM) extensions for distribution members, non-members PEL/57 IEC 61975:2010 High-voltage direct current (HVDC) Installations. System tests members, non-members PEL/22 IEC : Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices. Human models, instrumentation, and procedures. Procedure to determine the specific absorption rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHzto 6 GHz) CORRIGENDUM 1:June 2010 to IEC :2010 GEL/106 IEC/TS :2010 Power systems management and associated information exchange. Data and communications security. Network and system management (NSM) data object models members, non-members PEL/57 IEC : Audio/video, information and communication technology equipment. Safety requirements CORRIGENDUM 1:June 2010 to IEC :2010 EPL/108 IEC 62486:2010 Railway applications. Current collection systems. Technical criteria for the interaction between pantograph and overhead line (to achieve free access) members, non-members GEL/9 IEC :2010 ESL measuring method. Capacitors with lead terminal for use in electronic equipment members, non-members EPL/40X IEC :2010 ESL measuring method. Surface mount capacitors for use in electronic equipment members, non-members EPL/40X IEC :2010 OPC unified architecture. Address Space Model members, non-members AMT/7 IEC 62589:2010 Railway applications. Fixed installations. Harmonisation of the rated values for converter groups and tests on converter groups members, non-members GEL/9/3 IEC 62614:2010 Fibre optics. Launch condition requirements for measuring multimode attenuation members, non-members GEL/86 72 Prices may be subject to change. Update Standards Sep 2010

73 Intelligent buying for a brighter future BS 8903:2010 Principles and framework for procuring sustainably. Guide Customers and other stakeholders are demanding that you consider their future when making purchasing decisions. What's more, making purchasing decisions based on wider costs can help you achieve increased efficiency and more stable suppliers and markets. So how can you achieve best practice when it comes to purchasing sustainably? BS 8903 is a practical guide to embedding sustainable procurement principles and practices across your organization and it's supply chain. It also includes guidance on how to measure your success. So why not use BS 8903 to demonstrate to your customers and stakeholders that you're making purchasing decisions with their future in mind? It applies across the whole procurement cycle from one time purchases to ongoing contracts with long term supplier partners. Read more and buy at To buy online visit or contact BSI Customer Services quoting marketing reference code 8903J-U Tel +44 (0) Fax +44 (0) orders@bsigroup.com raising standards worldwide Standards and publications may also be ordered via the BSI shop at *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0) BSI British Standards Institution 2010

74 IEC Publications continued... CISPR : Specification for radio disturbance and immunity measuring apparatus and methods. Methods of measurement of disturbances and immunity. Conducted disturbance measurements AMENDMENT 1:July 2010 to CISPR : members, non-members GEL/210/12 CISPR :2010 (Edition 2) Specification for radio disturbance and immunity measuring apparatus and methods. Methods of measurement of disturbances and immunity. Measurement of disturbance power members, non-members GEL/210/12 ISO PUBLICATIONS It is BSI policy to supply the UK version of all adopted standards, which are published as British standards, unless otherwise requested. The following ISO publications are available from BSI Customer Services (see How to order on page 2) ISO 105-E05:2010 (Edition 5) Textiles. Tests for colour fastness. Colour fastness to spotting: Acid members, non-members TCI/81 ISO 639-4:2010 Codes for the representation of names of languages. General principles of coding of the representation of names of languages and related entities, and application guidelines members, non-members TS/1 ISO 813:2010 (Edition 4) Rubber, vulcanized or thermoplastic. Determination of adhesion to a rigid substrate. 90 peel method members, non-members PRI/22 ISO 2061:2010 (Edition 3) Textiles. Determination of twist in yarns. Direct counting method members, non-members TCI/24 ISO 2307:2010 (Edition 4) Fibre ropes. Determination of certain physical and mechanical properties members, non-members TCI/77 ISO 2376:2010 (Edition 2) Anodizing of aluminium and its alloys. Determination of electric breakdown potential members, non-members STI/32 ISO 2781: Rubber, vulcanized or thermoplastic. Determination of density AMENDMENT 1:July 2010 to ISO 2781: members, 9.64 non-members PRI/22 ISO 3039:2010 (Edition 2) Corrugated fibreboard. Determination of grammage of the component papers after separation members, non-members PAI/11 ISO 4107:2010 (Edition 4) Commercial vehicles. Wheelhub attachment dimensions members, non-members AUE/4 ISO 4309:2010 (Edition 4) Cranes. Wire ropes. Care and maintenance, inspection and discard members, non-members MHE/3 ISO 4701: Iron ores and direct reduced iron. Determination of size distribution by sieving CORRIGENDUM 1:August 2010 to ISO 4701:2008 ISE/58 ISO :2010 Tool holders with rectangular shank for indexable inserts. General survey, correlation and determination of dimensions members, non-members MTE/18 ISO :2010 Tool holders with rectangular shank for indexable inserts. Style A members, non-members MTE/18 ISO :2010 Tool holders with rectangular shank for indexable inserts. Style B members, non-members MTE/18 ISO :2010 Tool holders with rectangular shank for indexable inserts. Style D members, non-members MTE/18 ISO :2010 Tool holders with rectangular shank for indexable inserts. Style F members, non-members MTE/18 ISO :2010 Tool holders with rectangular shank for indexable inserts. Style G members, non-members MTE/18 ISO :2010 Tool holders with rectangular shank for indexable inserts. Style J members, non-members MTE/18 ISO :2010 Tool holders with rectangular shank for indexable inserts. Style K members, non members MTE/18 ISO :2010 Tool holders with rectangular shank for indexable inserts. Style L members, non-members MTE/18 ISO :2010 Tool holders with rectangular shank for indexable inserts. Style N members, non-members MTE/18 ISO :2010 Tool holders with rectangular shank for indexable inserts. Style R members, non-members MTE/18 74 Prices may be subject to change. Update Standards Sep 2010

75 BSI Knowledge Centre Your standards resource BSI Knowledge Centre provides the following services to BSI Members: Enquiry Line information on the status, availability, scope and coverage of standards detailed database searches across current and withdrawn standards response within 1 working day Loan service borrow a wide selection of international and foreign standards Information Resources consult databases, journals and standards in our member study area. Contact us to arrange a visit Withdrawn Standards a comprehensive collection of withdrawn British Standards available to view and purchase in PDF and hardcopy For more information contact the BSI Knowledge Centre: Tel +44 (0) Fax +44 (0) knowledgecentre@bsigroup.com raising standards worldwide New book Managing Security in Outsourced and Off-shored Environments. How to Safeguard Intellectual Assets in a Virtual Business World David Lacey If you need a working knowledge of how to implement and manage outsourcing and off-shoring of IT and business services, then this is the book for you. Even if you have no prior knowledge of the subject, the book s focus on the practical along with the specialist aspects of security management will give you a firm grounding. Access insights, tips and the warnings associated with outsourcing, including the three highly persuasive factors that will help you convince your managing director to see the benefits of externalizing supplies and services, whilst managing the risks. Clearly laid out, the book sets out guidance, best practice and critical success factors for managing security risks. For the impatient amongst you, the key learning points contained in each chapter are a useful starting point for grasping the salient issues. Buy the book and follow the real-life experiences of designing and managing large scale outsourcing programmes, so you too can harness the powerful business practices that are capable of delivering impressive cost savings and operational benefits. Read more and buy at To buy please visit or contact BSI Customer Services quoting marketing reference 0116J-U Tel +44 (0) Fax +44 (0) orders@bsigroup.com Standards and publications may also be ordered via the BSI shop at *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0) BSI British Standards Institution 2010

76 ISO Publications continued... ISO :2010 Tool holders with rectangular shank for indexable inserts. Style S members, non-members MTE/18 ISO :2010 Tool holders with rectangular shank for indexable inserts. Style T members, non-members MTE/18 ISO :2010 Tool holders with rectangular shank for indexable inserts. Style H members, non-members MTE/18 ISO :2010 Tool holders with rectangular shank for indexable inserts. Style V members, non-members MTE/18 ISO 6581:2010 (Edition 2) Anodizing of aluminium and its alloys. Determination of the comparative fastness to ultraviolet light and heat of coloured anodic oxidation coatings members, non-members STI/32 ISO : Rubber. Analysis by pyrolytic gas chromatographic methods. Identification of polymers (single polymers and polymer blends) AMENDMENT 1:July 2010 to ISO : members, 9.64 non-members PRI/23 ISO 7779:2010 (Edition 3) Acoustics. Measurement of airborne noise emitted by information technology and telecommunications equipment members, non-members EH/1/4 ISO 8993:2010 (Edition 2) Anodizing of aluminium and its alloys. Rating system for the evaluation of pitting corrosion. Chart method members, non-members STI/32 ISO/IEC : Information technology. Database languages. SQL Framework. (SQL/Framework) CORRIGENDUM 1:June 2010 to ISO/IEC :2008 IST/40 ISO/IEC : Information technology. Database languages. SQL Foundation. (SQL/Foundation) CORRIGENDUM 1:June 2010 to ISO/IEC :2008 IST/40 ISO/IEC : Information technology. Database languages. SQL Persistent Stored Modules (SQL/PSM) CORRIGENDUM 1:June 2010 to ISO/IEC :2008 IST/40 ISO/IEC : Information technology. Database languages. SQL Management of External Data (SQL/MED) CORRIGENDUM 1:June 2010 to ISO/IEC :2008 IST/40 ISO/IEC : Information technology. Database languages. SQL Object Language Bindings (SQL/OLB) CORRIGENDUM 1:June 2010 to ISO/IEC :2008 IST/40 ISO/IEC : Information technology. Database languages. SQL SQL Routines and Types Using the Java TM Programming Language (SQL/JRT) CORRIGENDUM 1:June 2010 to ISO/IEC :2008 IST/40 ISO/IEC : Information technology. Database languages. SQL XML-Related Specifications (SQL/XML) CORRIGENDUM 1:June 2010 to ISO/IEC :2008 IST/40 ISO 10244:2010 Document management. Business process baselining and analysis members, non-members IDT/1/2 Will not be implemented as a British Standard ISO 10276:2010 Nuclear energy. Fuel technology. Trunnions for packages used to transport radioactive material members, non-members NCE/9 Will be implemented as a British Standard ISO :2010 Cutter arbors with parallel key and tenon drive. General dimensions members, non-members MTE/18 ISO :2010 Cutter arbors with parallel key and tenon drive. Dimensions and designation of tool holders with hollow taper interface with flange contact surface members, non-members MTE/18 ISO :2010 Cutter arbors with parallel key and tenon drive. Dimensions and designation of tool holders with 7/24 taper for automatic tool changers members, non-members MTE/18 ISO :2010 Cutter arbors with parallel key and tenon drive. Dimensions and designation of tool holders with 7/24 taper without automatic tool changers members, non-members MTE/18 ISO :2010 Acoustics. Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining rooms. Application to junctions with at least one heavy element members, non-members EH/1/6 ISO :2010 (Edition 3) Biological evaluation of medical devices. Tests for irritation and skin sensitization members, non-members CH/194 ISO 11231:2010 Space systems. Probabilistic risk assessment (PRA) members, non-members ACE/68/-/5 76 Prices may be subject to change. Update Standards Sep 2010

77 ISO/TR 11360:2010 Nanotechnologies. Methodology for the classification and categorization of nanomaterials members, non-members NTI/1 ISO 11476:2010 (Edition 2) Paper and board. Determination of CIE whiteness, C/2 (indoor illumination conditions) members, non-members PAI/11 ISO 11745:2010 Brazing for aerospace applications. Qualification test for brazers and brazing operators. Brazing of metallic components members, non-members WEE/-/1 ISO :2010 Lasers and laser-related equipment. Determination of laser resistance of tracheal tubes. Tracheal tube cuffs members, non-members CPW/172/9 ISO/TR 12845:2010 Selected illustrations of fractional factorial screening experiments members, non-members MS/6 ISO/TS :2010 Industrial automation systems and integration. Parts library. Implementation resources. Spreadsheet interface for parts library members, non-members AMT/4 Will not be implemented as a British Standard. Is approved as suitable for use in the UK ISO 13822:2010 (Edition 2) Bases for design of structures. Assessment of existing structures members, non-members B/525/1 Will not be implemented as a British Standard ISO 14237:2010 (Edition 2) Surface chemical analysis. Secondary-ion mass spectrometry. Determination of boron atomic concentration in silicon using uniformly doped materials members, non-members CII/60 ISO/IEC :2010 Information technology. Small computer system interface (SCSI). Serial attached SCSI-1.1 (SAS-1.1) members, non-members IST/6 Will not be implemented as a British Standard ISO/IEC TR :2010 Systems and software engineering. Systems and software assurance. Concepts and vocabulary members, non-members IST/15 ISO :2010 Earth-moving machinery and mobile road construction machinery. Worksite data exchange. System architecture members, non-members B/513/1 ISO :2010 Earth-moving machinery and mobile road construction machinery. Worksite data exchange. Data dictionary members, non-members B/513/1 ISO 15529:2010 (Edition 3) Optics and photonics. Optical transfer function. Principles of measurement of modulation transfer function (MTF) of sampled imaging systems members, non-members CPW/172/1 ISO 15856:2010 Space systems. Space environment. Simulation guidelines for radiation exposure of nonmetallic materials members, non-members ACE/68/-/4 ISO :2010 (Edition 2) Graphic technology. Prepress digital data exchange using PDF. Complete exchange of printing data (PDF/X-4) and partial exchange of printing data with external profile reference (PDF/X-4p) using PDF members, non members PAI/43 ISO :2010 (Edition 2) Graphic technology. Prepress digital data exchange using PDF. Partial exchange of printing data using PDF 1.6 (PDF/X-5) members, non-members PAI/43 ISO/IEC/TR 16166:2010 Information technology. Telecommunications and information exchange between systems. Next Generation Corporate Networks (NGCN). Security of session-based communications members, non-members IST/6 Will be implemented as a British Standard ISO/IEC/TR 16167:2010 Information technology. Telecommunications and information exchange between systems. Next Generation Corporate Networks (NGCN). Emergency calls members, non-members IST/6 Will not be implemented as a British Standard ISO :2010 Graphic technology. Variable data exchange. Using PDF/X-4 and PDF/X-5 (PDF/VT-1 and PDF/VT-2) members, non-members PAI/43 ISO 17331: Surface chemical analysis. Chemical methods for the collection of elements from the surface of silicon-wafer working reference materials and their determination by total-reflection X-ray fluorescence (TXRF) spectroscopy AMENDMENT 1:July 2010 to ISO 17331: members, 9.64 non-members CII/60 ISO :2010 Surface chemical analysis. Vocabulary. General terms and terms used in spectroscopy members, non-members CII/60 ISO :2010 Surface chemical analysis. Vocabulary. Terms used in scanning-probe microscopy members, non-members CII/60 ISO 19250:2010 Water quality. Detection of Salmonella spp members, non-members EH/3/4 ISO/TS :2010 Road vehicles. Inlet air cleaning equipment for internal combustion engines and compressors. Fractional efficiency testing with fine particles (0,3µ to 5µ optical diameter) members, non-members MCE/21/2 Update Standards Sep 2010 Prices may be subject to change. 77

78 ISO Publications continued... ISO/TS :2010 Road vehicles. Inlet air cleaning equipment for internal combustion engines and compressors. Fractional efficiency testing with coarse particles (5µ to 40µ optical diameter) members, non members MCE/21/2 ISO/IEC : Information technology. Biometric application programming interface. BioAPI specification AMENDMENT 3:August 2010 to ISO/IEC : members, non members IST/44 by amendment to a National Standard ISO :2010 Timber structures. Bond performance of adhesives. Basic requirements members, non-members B/518 ISO :2010 Glass in buildings. Insulating glass. Gas concentration and gas leakage members, non-members B/520/2 Will not be implemented as a British Standard ISO :2010 Glass in buildings. Insulating glass. Methods of test for the physical attributes of edge seals members, non-members B/520/2 Will not be implemented as a British Standard ISO 21338:2010 Water quality. Kinetic determination of the inhibitory effects of sediment, other solids and coloured samples on the light emission of Vibrio fischeri (kinetic luminescent bacteria test) members, non-members EH/3/5 ISO :2010 Workplace atmospheres. Determination of inorganic acids by ion chromatography. Hydrofluoric acid and particulate fluorides members, non-members EH/2/2 ISO 22390:2010 Timber structures. Laminated veneer lumber. Structural properties members, non-members B/518 Will not be implemented as a British Standard ISO :2010 Space systems. Oxygen safety. Facility planning and implementation members, non-members ACE/68 ISO 22810:2010 Horology. Water-resistant watches members, non-members STI/53 ISO/IEC :2010 Information technology. Multimedia application format (MPEG-A). Interactive music application format members, non-members IST/37 Will not be implemented as a British Standard ISO :2010 Automatic vehicle and equipment identification. Electronic registration identification (ERI) for vehicles. Architecture members, non-members EPL/278 ISO :2010 Automatic vehicle and equipment identification. Electronic registration identification (ERI) for vehicles. Operational requirements members, non-members EPL/278 ISO :2010 Automatic vehicle and equipment identification. Electronic registration identification (ERI) for vehicles. Vehicle data members, non-members EPL/278 ISO :2010 Automatic vehicle and equipment identification. Electronic registration identification (ERI) for vehicles. Secure communications using asymmetrical techniques members, non-members EPL/278 ISO/IEC 24723:2010 (Edition 2) Information technology. Automatic identification and data capture techniques. GS1 Composite bar code symbology specification members, non-members IST/34 ISO/IEC TR 25060:2010 Systems and software engineering. Systems and software product Quality Requirements and Evaluation (SQuaRE). Common Industry Format (CIF) for usability. General framework for usability-related information members, non-members IST/15 ISO 25140:2010 Stationary source emissions. Automatic method for the determination of the methane concentration using flame ionisation detection (FID) members, non-members EH/2/1 ISO :2010 Optics and photonics. Electronic exchange of optical data. NODIF information model members, non-members CPW/172/1 ISO 26802:2010 Nuclear facilities. Criteria for the design and the operation of containment and ventilation systems for nuclear reactors members, non-members NCE/2 Will be implemented as a British Standard ISO/TR 27507:2010 Plain bearings. Recommendations for automotive crankshaft bearing environments members, non-members MCE/12 ISO/TS 27527:2010 Health informatics. Provider identification members, non-members IST/35 ISO 27955:2010 Road vehicles. Securing of cargo in passenger cars, station wagons and multi-purpose vehicles. Requirements and test methods members, non-members AUE/7 ISO 29383:2010 Terminology policies. Development and implementation members, non-members TS/1 ISO/PAS PUBLICATIONS ISO/PAS 13613:2010 Ships and marine technology. Maintenance and testing to reduce losses in critical systems for propulsion members, non-members SME/32/-/3 78 Prices may be subject to change. Update Standards Sep 2010

79 New book Quality Service, Competitive Business: Setting the Standard in Customer Service Howard Kendall This new book is the definitive guide to world-class customer service delivery, offering an invaluable resource for any business with customer service personnel. Customer retention is the key to business success and this book will help you to achieve excellence in serving your customers by putting the role, leadership and strategy of customer service operations into a business-aligned and integrated perspective. Using BSI s customer service standards, the book highlights the structure and organization of staff, and gives advice on how to achieve the best operational mix. Emphasis is on the importance of best practice processes and using them to: Achieve a great customer experience Set and meet targets Measure performance statistics to gauge successful service delivery and areas for improvement. Who should read this book? Any business with a customer services team Customer service managers and representatives Customer relationship managers and complaints handling managers HR personnel All public sector bodies. Read more and buy at To buy please visit or contact BSI Customer Services quoting marketing reference 2189J-U Tel +44 (0) Fax +44 (0) orders@bsigroup.com Standards and publications may also be ordered via the BSI shop at *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0) BSI British Standards Institution 2010 American Welding Society AWS D1.1: Structural welding code-steel Save time and money with a new 5 year revision cycle This code covers the welding requirements for any type of welded structure made from the commonly used carbon and low-alloy constructional steels. Clauses 1 through 8 constitute a body of rules for the regulation of welding in steel construction. There are eight normative and twelve informative annexes in this code. A Commentary of the code is included with the document. Significant changes in 2010 Edition: New prequalification variable tables and accompanying commentary added to clarify what variables must be listed on prequalified WPSs and what ranges they are allowed Matching and under matching table in the prequalification section was revised to clarify intent Weld profile requirements were clarified and slightly revised Shelf bar requirements were added Thermal cut requirements were changed Weld access hole and beam cope requirements were revised and clarified Weathering steel requirements were expanded to include more materials Three new materials were added to the list of prequalified materials Issue on CVN qualification was clarified to avoid unnecessary testing Backing requirements revised to allow discontinuous backing in limited applications Headed stud requirements revised and clarified for burst cracks. Price: Non-Members Members and Distributors *Prices subject to change due to exchange rate fluctuations. To order please contact world wide sales by: worldwide.standards@bsigroup.com To order please worldwide.standards@bsigroup.com. For quotes and queries please or call Worldwide Standards quoting marketing reference AWSD1/J-U Tel Fax worldwide.standards@bsigroup.com * Postage applies BSI British Standards Institution 2010

80 New standard The ISO 9000 Standards Collection Quality Management Systems Save time and improve your understanding of Quality Management Systems (QMS) with this great value ISO 9000 Standards Collection. The convenient, enhanced PDF format brings ISO 9000, ISO 9001 and ISO 9004 together, creating links between clauses and documents and pairing key terms with their definitions. A clear, concise overview places the three standards in context and explains how they can work together. It proposes some key actions and considerations to meet the most common challenges encountered when adopting the ISO 9000 series. Pinpoint exact phrases or clauses instantly with the search facility, or navigate the series quickly and easily using a comprehensive and logical structure of bookmarks and links. What does this Quality Management System Collection contain? This publication contains the three key standards for quality management, plus an introductory overview: BS EN ISO 9000:2005 Quality management systems. Fundamentals and vocabulary BS EN ISO 9001:2008 Quality management systems. Requirements BS EN ISO 9004:2009 Managing for the sustained success of an organization. A quality management approach Who is The ISO 9000 Standards Collection for? The ISO 9000 Standards Collection will be of interest to anyone responsible for implementing, maintaining or auditing a QMS to the ISO 9000 series, whether their system is in its infancy or well established, including: Quality managers Compliance managers Senior management Auditors Consultants. The enhanced PDF format can aid understanding by highlighting links within and between these three key standards as well as saving time by enabling quick, easy and accurate navigation. Need to share The ISO 9000 Standards Collection? The document could also be placed on a network so you can share it with colleagues across the business. For networking opportunities, contact BSI Customer Services or sales@bsigroup.com. Buy at To buy online visit or contact BSI Customer Services quoting marketing reference code NewqualcJ-U Tel +44 (0) Fax +44 (0) orders@bsigroup.com raising standards worldwide Standards and publications may also be ordered via the BSI shop at *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0) BSI British Standards Institution 2010