This new standard enables clear data use statements and can help with GDPR compliance.

Transcription

1 December 2017 bsigroup.com This new standard enables clear data use statements and can help with GDPR compliance. Find out more shop.bsigroup.com/19944 Contents 4 Quick Reference Guide 10 New and revised British Standards 10 BS EN publications 17 British Standard implementations 21 Published Documents 22 Corrigenda to British Standards 23 Updated British Standards 23 British Standards confirmed 24 British Standards withdrawn 28 British Standards under review 40 New work started 49 Draft British Standards 60 Documents not issued as DPCs 60 CEN publications 62 CENELEC publications 63 IEC publications 64 ISO publications

2 Welcome to Update Standards In these pages you ll find details of new, revised, draft and withdrawn standards and publications from the last month. Update Standards is changing in the next few months. We would like our Members to have their say on this development to ensure we deliver standards information in the best way possible. Stay tuned for details. Free expert help from our Knowledge Centre Our information professionals will take the hassle out of your standards and subject searches by doing them for you. They can provide you with information on what a standard covers, carry out subject searches and even provide you with expanded information on what a standard covers through keyword searches, saving you a huge amount of time and effort. They ll also search for standards from over 200 standards organizations in 23 countries if that s what you need. This service is available exclusively for BSI Members only. To find out more about what the Knowledge Centre can do for you, contact us today: Phone Fax knowledgecentre@bsigroup.com How to order The standards, publications and conferences featured in this magazine are available online or from our customer services team. Customer services is open from 09:00-17:00 Monday to Friday. Phone Website shop.bsigroup.com/ UScustomerservices orders@bsigroup.com to place an order. info@bsigroup.com to make an enquiry Fax Post BSI Customer Services 389 Chiswick High Road, London W4 4AL bsigroup.com/uscustomerservices BSI Training Our tutors are skilled in transferring knowledge contained within each standard to help you embed excellence within your organization. We trained 90,000 people globally last year, and with over 72,000 clients in 150 countries, you can trust BSI to help you perform better, reduce risk and grow sustainably. Visit us and download our training catalogue today: bsigroup.com/ustraining To view past Update Standards including ETSI data, please visit shop.bsigroup.com/usarchive

3 Build credibility for your business. Sponsor a PAS Why create a PAS? Improve productivity Increase efficiency Reduce costs Maintain quality Accelerate innovation Agree good practice Build trust with consumers Can be developed into an international standard Who is a PAS for? Government and public sector Trade associations Professional bodies and private organizations bsigroup.com/pas A PAS (Publicly Available Specification) is your own fast-track standardization document the result of an expert consulting service from BSI They are usually commissioned by industry leaders be they individual companies, SMEs, trade associations or government departments. A PAS may have the potential to resolve some of the strategic issues that organizations face. Commissioning a PAS can also put an organization in the driving seat for setting the agenda in their sector. You can have a PAS for a wide variety of issues and sectors. Recent PASs include detailed specifications for e-cigarette manufacturing and new guidelines on dementia care. As PAS can help your business: Win more business by giving your innovations a badge of authority Get to market faster by creating a rapid route to standardization Build trust in your organization by setting the bar for good practice Raise your industry and media profile by linking with BSI s respected brand Take a leadership role in your sector by helping to resolve its strategic issues Contact us for an informal chat on how a PAS could help your organization: bsigroup.com/pas T: jonathon.lyons@bsigroup.com

4 British Standards Quick Reference Guide The following British Standards are listed or referred to in this issue of Update Standards with the exception of those in New Work Started. Quick reference guide Building and civil engineering BS , 24 BS BS BS BS BS , 24 BS BS EN BS EN BS EN BS EN BS EN BS EN BS EN , 24 BS EN BS EN BS EN BS EN BS EN BS EN , 25 BS EN BS EN , 25 BS EN BS EN BS EN BS EN BS EN BS EN , 25 BS EN BS EN ISO BS ISO , 27 BS ISO BS ISO , 27 BS ISO BS ISO BS ISO PD CEN/TR PD CEN/TR PD CEN/TS , 25 Consumer products and services BS BS BS BS EN BS EN , 24 BS EN ISO BS EN ISO BS EN ISO BS EN BS EN BS EN BS EN BS EN BS EN BS EN , 25 BS EN BS EN ISO BS EN ISO , 25 BS EN ISO , 25 BS EN BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO , 27 DD ISO/TS DD ISO/TS PD CEN/TR PD ISO/TS PD ISO/IEC GUIDE Electrotechnical BS EN ISO BS EN BS EN ISO BS EN , 25 BS EN BS EN , 25 BS EN , 25 BS EN BS EN , 26 BS EN , 26 BS EN , 26 BS EN BS EN BS EN , 26, 28 BS EN , 26 BS EN , 26 BS EN , 26 BS EN BS EN , 26 BS EN BS EN , 26 BS EN BS EN , 26 BS EN , 26 BS EN , 26 BS EN BS EN , 26 BS EN BS EN , 26 BS EN , 28 BS EN , 26 BS EN BS EN , 26 BS EN , 26 BS EN BS EN BS EN , 27 BS EN , 27 BS EN BS EN BS EN , 28 BS EN BS EN , 27 BS EN BS EN BS EN BS EN BS EN BS EN BS ISO BS ISO BS ISO BS IEC , 28 BS IEC BS IEC BS IEC BS IEC DD IEC/PAS , 28 DD CLC/TS , 28 PD CEN/TR PD CEN ISO/TS , 27 PD CEN/ISO TS , 27 PD ISO/TS PD ISO/TR PD IEC/PAS PD IEC/TR PD IEC/TR PD IEC/TR BS QC Engineering BS BS , 24 BS , 24 BS , 24 BS BS BS , 24 BS BS , 24 BS , 24 BS BS EN BS EN BS EN , 24 BS EN BS EN BS EN BS EN ISO BS EN BS EN ISO BS EN BS EN , 24 BS EN ISO BS EN , 24 BS EN ISO , 25 BS EN ISO BS EN BS EN ISO BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN ISO BS EN ISO BS EN ISO , 25 BS EN ISO BS EN BS EN BS EN ISO BS EN ISO , 25 BS EN ISO BS EN ISO , 25 BS EN BS EN BS EN ISO BS EN ISO , 25 BS EN ISO , 25 BS EN BS EN ISO BS EN ISO BS EN BS EN BS EN BS EN BS EN BS EN ISO BS EN BS EN ISO BS EN ISO BS EN ISO , 25 BS EN ISO BS EN BS EN ISO , 25 BS EN ISO BS EN BS EN BS EN BS EN , 25 BS EN BS EN BS EN BS EN ISO BS EN BS EN BS EN ISO , 25 BS EN BS EN BS EN ISO , 25 BS EN ISO BS EN ISO Prices may be subject to change. Update Standards December 2017

5 British Standards Quick Reference Guide continued... BS EN BS EN BS EN , 15 BS EN BS EN ISO BS EN ISO BS EN ISO , 25 BS EN ISO BS EN ISO BS EN ISO BS EN , 26 BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO , 27 BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO , 27 BS ISO BS ISO BS ISO , 27 BS ISO , 27 BS ISO , 24 BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO , 38 BS ISO BS ISO BS ISO BS ISO BS ISO , 24 BS ISO BS ISO BS ISO BS ISO , 27 BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO , 27 BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO , 28 BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO DD ISO/TS DD ISO/TS PD PD ISO/TS PD ISO/TS PD ISO/TS PD ISO/TR PD ISO/TS , 40 PD ISO GUIDE BS MA BS MA BS MA BS MA BS MA BS AU BS AU 203a...40 Health and environment BS BS , 24 BS EN BS EN BS EN BS EN BS EN ISO , 25 BS EN ISO BS EN ISO BS EN ISO BS EN BS EN ISO BS EN ISO BS EN BS EN BS EN BS EN BS EN ISO BS EN ISO BS EN ISO BS EN BS EN BS EN BS EN BS EN ISO BS EN ISO BS EN ISO BS ISO , 27 BS ISO BS ISO BS ISO BS ISO BS ISO DD ISO/TS PD ISO/TS PD ISO/TS PD ISO/TR Information systems BS , 28 BS BS EN ISO/IEC BS EN BS EN BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN BS ISO , 27 BS ISO/IEC BS ISO/IEC/IEEE , 27 BS ISO/IEC/IEEE , 27 BS ISO/IEC IEEE BS ISO/IEC/IEEE , 28 BS ISO/IEC BS ISO/IEC BS ISO/IEC BS ISO/IEC BS ISO/IEC BS ISO BS ISO/IEC BS ISO BS ISO/IEC , 27 BS ISO BS ISO , 27 BS ISO/IEC , 28 BS ISO BS ISO BS ISO/IEC BS ISO/IEC BS ISO/IEC BS ISO BS ISO , 28 BS ISO/IEC BS ISO/IEC BS ISO/IEC BS ISO/IEC BS ISO/IEC BS ISO/IEC , 28 BS ISO/IEC , 28 BS ISO/IEC BS ISO/IEC BS ISO/IEC BS ISO/IEC BS ISO/IEC BS ISO/IEC BS ISO/IEC BS ISO/IEC BS ISO/IEC PD CEN/TR PD CEN/TS PD ISO/IEC TR PD ISO/IEC TR , 27 PD ISO/TR , 27 PD ISO/TS PD ISO/IEC TR PD ISO/TS Management systems BS , 24 BS EN ISO BS EN BS EN ISO BS EN ISO BS EN BS ISO BS ISO , 27 BS ISO BS ISO , 27 BS ISO BS ISO , 28 BS ISO BS ISO , 24 BS ISO , 24 BS ISO , 28 BS ISO , 27 BS ISO , 27 BS ISO PD CEN ISO/TS PD ISO/TS Materials and chemicals BS BS , 24, 25, 28, 29, 32, 33, 34, 35, 38 BS , 24 BS BS , 29 BS BS BS , 24 BS EN ISO BS EN BS EN ISO Update Standards December 2017 Prices may be subject to change. 5

6 British Standards Quick Reference Guide continued... BS EN ISO BS EN BS EN BS EN BS EN BS EN ISO BS EN ISO BS EN ISO , 24 BS EN ISO BS EN ISO , 24 BS EN ISO , 24 BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO , 25 BS EN ISO BS EN ISO BS EN ISO BS EN ISO , 22, 25, 32 BS EN BS EN BS EN ISO BS EN BS EN BS EN BS EN ISO BS EN ISO BS EN BS EN ISO BS EN BS EN , 25 BS EN , 33 BS EN BS EN BS EN , 33 BS EN BS EN ISO BS EN BS EN BS EN BS EN BS EN ISO BS EN BS EN ISO BS EN ISO BS EN ISO BS EN BS EN ISO BS EN ISO BS EN BS EN ISO BS EN BS EN ISO BS EN ISO BS EN ISO BS EN BS EN BS EN BS EN BS EN ISO BS EN ISO BS EN ISO BS EN BS EN BS EN BS EN BS EN BS EN BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN BS EN BS EN ISO BS ISO BS ISO BS ISO , 27 BS ISO BS ISO , 24 BS ISO , 27 BS ISO BS ISO BS ISO , 27 BS ISO BS ISO , 24 BS ISO BS ISO BS ISO , 27 BS ISO BS ISO , 27 BS ISO BS ISO BS ISO BS ISO , 27 BS ISO BS ISO BS ISO BS ISO , 38 BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO , 28 DD ISO/TS PD ISO/TS PD ISO/TR PD ISO GUIDE Alpha-numeric sequence of British Standards quoted in this issue BS BS BS BS , 24, 25, 28, 29, 32, 33, 34, 35, 38 BS , 24 BS BS , 24 BS , 24 BS BS , 24 BS , 24 BS , 24 BS , 24 BS , 29 BS BS BS BS BS , 24 BS BS BS BS , 24 BS BS , 28 BS , 24 BS BS , 24 BS BS , 24 BS BS BS BS BS EN BS EN ISO BS EN BS EN BS EN ISO BS EN BS EN BS EN BS EN BS EN , 24 BS EN ISO BS EN BS EN BS EN BS EN BS EN ISO/IEC BS EN BS EN BS EN BS EN BS EN , 24 BS EN BS EN BS EN BS EN BS EN BS EN , 24 BS EN ISO BS EN BS EN BS EN BS EN ISO BS EN BS EN BS EN ISO , 24 BS EN ISO BS EN ISO BS EN ISO , 24 BS EN ISO , 24 BS EN ISO BS EN ISO BS EN BS EN ISO BS EN BS EN ISO BS EN , 24 BS EN ISO BS EN , 24 BS EN ISO , 25 BS EN ISO BS EN ISO BS EN BS EN ISO BS EN ISO BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN ISO BS EN ISO BS EN ISO BS EN ISO , 25 BS EN ISO BS EN BS EN BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO , 25 BS EN ISO BS EN ISO BS EN ISO BS EN ISO , 25 BS EN ISO Prices may be subject to change. Update Standards December 2017

7 Two new documents tackling better I&HASs and Alarm Transmission Systems BSI has produced two new Published Documents this summer aimed at helping improve the effectiveness of alarm systems. - The revised PD 6662:2017 PUBLISHED DOCUMENT Scheme for the application of European Standards for intrusion and holdup alarm systems describes how systems should be configured using the right standards in the right way. In addition, to be eligible for a Police Unique Reference Number and therefore a police response systems must be set up in alignment with this PD. - The all new PD 6669:2017 Guidance for the provision of Alarm Transmission Systems (ATS) for Alarm Systems in the UK supplies guidance, advice and clarifications to help users comply with the BS EN suite of European standards on alarm transmission systems, and ultimately implement more reliable and available transmission systems. Both documents have been written as schemes that will run in combination with one another. These PDs will be extremely useful to a wide range of people, including: - System purchasers, specifiers, manufacturers, consultants, designers, installers and maintainers - Insurers - Inspectors - Test houses - Police and fire organizations Find out more shop.bsigroup.com/pd6669 shop.bsigroup.com/pd To contact us visit shop.bsigroup.com/pd6669 or contact Customer Services quoting marketing reference code USPD6669 T F orders@bsigroup.com shop.bsigroup.com/pd6669 Standards and publications may also be ordered via the BSI shop at shop.bsigroup.com *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call BSI British Standards Institution 2017

8 Alpha-numeric Sequence of British Standards continued... BS EN BS EN ISO , 25 BS EN BS EN ISO BS EN ISO BS EN ISO BS EN ISO , 25 BS EN ISO BS EN ISO , 25 BS EN ISO , 25 BS EN BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO , 22, 25, 32 BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN ISO BS EN BS EN BS EN BS EN BS EN ISO BS EN ISO BS EN ISO BS EN BS EN ISO BS EN ISO BS EN ISO BS EN BS EN BS EN ISO BS EN ISO BS EN , 25 BS EN , 33 BS EN BS EN BS EN ISO BS EN , 33 BS EN BS EN BS EN BS EN ISO BS EN , 25 BS EN BS EN ISO BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN ISO BS EN ISO BS EN BS EN ISO BS EN BS EN , 25 BS EN ISO BS EN BS EN BS EN ISO BS EN ISO , 25 BS EN ISO BS EN BS EN BS EN ISO BS EN ISO BS EN BS EN ISO BS EN BS EN BS EN ISO BS EN ISO , 25 BS EN BS EN ISO BS EN BS EN BS EN BS EN ISO BS EN ISO BS EN BS EN ISO BS EN BS EN BS EN ISO BS EN ISO BS EN ISO BS EN , 25 BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN ISO BS EN ISO BS EN BS EN BS EN BS EN BS EN BS EN BS EN ISO BS EN ISO , 25 BS EN ISO BS EN BS EN BS EN , 25 BS EN ISO , 25 BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN , 25 BS EN , 15 BS EN ISO BS EN BS EN BS EN ISO BS EN BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO , 25 BS EN ISO BS EN BS EN ISO , 25 BS EN ISO , 25 BS EN ISO BS EN BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN , 25 BS EN BS EN , 25 BS EN , 25 BS EN BS EN , 26 BS EN , 26 BS EN , 26 BS EN BS EN BS EN , 26, 28 BS EN , 26 BS EN , 26 BS EN , 26 BS EN , 26 BS EN BS EN , 26 BS EN BS EN , 26 BS EN BS EN , 26 BS EN , 26 BS EN , 26 BS EN BS EN , 26 BS EN BS EN , 26 BS EN , 28 BS EN , 26 BS EN BS EN , 26 BS EN , 26 BS EN BS EN BS EN , 27 BS EN , 27 BS EN BS EN BS EN , 28 BS EN BS EN , 27 BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO , 27 BS ISO BS ISO BS ISO , 24 BS ISO BS ISO , 27 BS ISO BS ISO BS ISO BS ISO , 27 BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO Prices may be subject to change. Update Standards December 2017

9 Alpha-numeric Sequence of British Standards continued... BS ISO BS ISO , 27 BS ISO BS ISO BS ISO BS ISO BS ISO , 27 BS ISO , 27 BS ISO BS ISO BS ISO BS ISO BS ISO , 27 BS ISO BS ISO BS ISO , 27 BS ISO , 27 BS ISO , 24 BS ISO , 24 BS ISO BS ISO BS ISO BS ISO BS ISO , 27 BS ISO BS ISO BS ISO , 27 BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO/IEC BS ISO BS ISO , 27 BS ISO BS ISO BS ISO BS ISO BS ISO/IEC/IEEE , 27 BS ISO/IEC/IEEE , 27 BS ISO/IEC IEEE BS ISO/IEC/IEEE , 28 BS ISO , 27 BS ISO BS ISO/IEC BS ISO BS ISO BS ISO BS ISO BS ISO/IEC BS ISO/IEC BS ISO BS ISO , 38 BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO/IEC BS ISO BS ISO , 38 BS ISO , 27 BS ISO BS ISO BS ISO BS ISO BS ISO , 27 BS ISO/IEC BS ISO BS ISO BS ISO BS ISO BS ISO , 27 BS ISO BS ISO BS ISO/IEC BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO/IEC , 27 BS ISO , 24 BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO , 27 BS ISO , 27 BS ISO BS ISO BS ISO BS ISO , 27 BS ISO BS ISO/IEC , 28 BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO , 27 BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO/IEC BS ISO BS ISO/IEC BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO/IEC BS ISO BS ISO BS ISO BS ISO , 28 BS ISO , 28 BS ISO BS ISO BS ISO BS ISO , 28 BS ISO BS ISO BS ISO BS ISO/IEC BS ISO/IEC BS ISO/IEC BS ISO/IEC BS ISO/IEC BS ISO BS ISO , 28 BS ISO BS ISO/IEC , 28 BS ISO/IEC , 28 BS ISO/IEC BS ISO/IEC BS ISO/IEC BS ISO BS ISO BS ISO BS ISO , 24 BS ISO , 24 BS ISO , 28 BS ISO , 27 BS ISO , 27 BS ISO/IEC BS ISO/IEC BS ISO/IEC BS ISO BS ISO/IEC BS ISO BS ISO BS ISO/IEC BS ISO/IEC BS IEC , 28 BS IEC BS IEC BS IEC BS IEC DD ISO/TS DD ISO/TS DD ISO/TS DD ISO/TS DD ISO/TS DD ISO/TS DD IEC/PAS , 28 DD CLC/TS , 28 PD CEN/TR PD CEN/TR PD CEN/TR PD CEN/TR PD CEN/TR PD CEN/TS , 25 PD CEN/TS PD CEN ISO/TS PD CEN ISO/TS , 27 PD CEN/ISO TS , 27 PD PD ISO/TS PD ISO/IEC TR PD ISO/TS PD ISO/IEC TR , 27 PD ISO/TS PD ISO/TS PD ISO/TR , 27 PD ISO/TS PD ISO/TS PD ISO/TR PD ISO/TS PD ISO/TS , 40 PD ISO/TS PD ISO/TS PD ISO/TR PD ISO/TR PD ISO/TS PD ISO/IEC TR PD ISO/TS PD ISO/TR PD ISO GUIDE PD ISO/IEC GUIDE PD ISO GUIDE PD IEC/PAS PD IEC/TR PD IEC/TR PD IEC/TR BS MA BS MA BS MA BS MA BS MA BS QC BS AU BS AU 203a...40 Update Standards December 2017 Prices may be subject to change. 9

10 British Standards BRITISH STANDARDS The following British Standard publications are available from BSI Customer Services (see How to order on page 2). The publications listed below are new and revised British Standards that were made available last month. An existing BSI publication bearing a number identical to one announced below is automatically withdrawn unless stated otherwise. In all other cases of supersession, details are given and a corresponding entry appears in the British Standards withdrawn section. BRITISH STANDARD IMPLEMENTATIONS WILL BE SUPPLIED IN PREFERENCE TO EUROPEAN OR INTERNATIONAL STANDARDS, UNLESS OTHERWISE REQUESTED. Please order by the British Standard reference not the ISBN number. BS 2000 series standards are also available from: Library of the Energy Institute 61 New Cavendish Street London W1G 7AR Tel: Fax: lis@energyinst.org.uk For this series, member pricing is applicable to BSI and Energy Institute members. BS :2017 Fire extinguishing installations and equipment on premises. Commissioning and maintenance of portable fire extinguishers. Code of practice supersedes BS :2009 ISBN members, non-members FSH/2 BS 5607:2017 Code of practice for the safe use of explosives in the construction industry supersedes BS 5607:1998 ISBN members, non-members B/513 BS 5974:2017 Planning, design, setting up and use of temporary suspended access equipment. Code of practice supersedes BS 5974:2010 ISBN members, non-members MHE/12/7 BS :2017 Planning, design, installation and use of permanently installed access equipment. Code of practice. Suspended access equipment supersedes BS :2003 ISBN MHE/12/7 BS :2017 Information security management systems. Guidelines for information security risk management supersedes BS :2006 and BS ISO/IEC 27005:2011 ISBN IST/33 BS 7981:2017 Code of practice for the installation, maintenance, thorough examination and safe use of mast climbing work platforms (MCWPs) supersedes BS 7981:2002 ISBN members, non-members MHE/12 BS 8297:2017 Design, manufacture and installation of architectural precast concrete cladding. Code of practice supersedes BS 8297:2000 ISBN members, non-members B/524 BS 8460:2017 Code of practice for the safe use of MEWPS supersedes BS 8460:2005 ISBN members, non-members MHE/12 BS :2017 Examination and test of new lifts before putting into service. Specification for means of determining compliance with BS EN 81. Passenger and goods passenger lifts conforming to BS EN ISBN members, non-members MHE/4 BS 8634:2017 Portable roof ladders. Specification ISBN B/512 BS EN PUBLICATIONS The following are British Standard implementations of the English language versions of European Standards (ENs). BSI has an obligation to publish all ENs and to withdraw any conflicting British Standards. This has led to a series of standards, BS ENs, using the EN number. Note: The date referenced in the identifier is the date of the European standard. BS EN 593:2017 Industrial valves. Metallic butterfly valves for general purposes supersedes BS EN 593:2009+A1:2011 ISBN PSE/18/3 BS EN :2017 Playground equipment and surfacing. General safety requirements and test methods supersedes BS EN :2008 ISBN members, non-members SW/65 BS EN :2017 Playground equipment and surfacing. Additional specific safety requirements and test methods for swings supersedes BS EN :2008 ISBN SW/65 BS EN :2017 Playground equipment and surfacing. Additional specific safety requirements and test methods for slides supersedes BS EN :2008 ISBN SW/65 BS EN :2017 Playground equipment and surfacing. Additional specific safety requirements and test methods for cableways supersedes BS EN :2008 ISBN members, non-members SW/65 BS EN :2017 Playground equipment and surfacing. Additional specific safety requirements and test methods for rocking equipment supersedes BS EN :2008 ISBN SW/65 10 Prices may be subject to change. Update Standards December 2017

11 Take the smart route to medical device compliance with BSI s Compliance Navigator A powerful workflow tool, Compliance Navigator holds over 2,000 documents essential for medical device compliance. And with multi-user access, it s available to your whole team. Smart tools that save time and money MDR/IVDR expert guidance Understand how the new regulations apply to your business and how to plan for the transition. Alerts to changes You ll be alerted to upcoming standard changes, so you can plan accordingly. Device-specific profiles You can create regulatory profiles for each device, so you have the information you need in one place right down to what s relevant to each aspect of development. A comprehensive source You can see the full text of the new MD and IVD regulations, standards, legislation and guidance, so you don t miss anything important. Expert commentary You ll interpret changes to standards correctly, as our experts provide context and guidance. Track changes You ll find it easy to see what s new, with red line changes between versions. Proceed with confidence Use the most authoritative source of medical device standards information on the market. With over a century of experience, BSI is trusted by thousands of companies worldwide to help them stay compliant and grow their businesses. It s not just the direct time saving of locating information quickly, it s a much faster, accelerated workflow. Rinda Sama, VP for Operations, Quality and Regulatory Affairs, Axonics Modulation Contact us today to book a demo and learn how Compliance Navigator can help you avoid risk, stay competitive and maximize profitability. T: +44 (0) E: cservices@bsigroup.com bsigroup.com/complinav

12 BS EN Publications continued... BS EN :2017 Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity. Site application of products and systems and quality control of the works supersedes BS EN :2003 ISBN members, non-members B/517/8 BS EN 2037:2017 Aerospace series. Hexagonal steel bars drawn. Dimensions. Tolerances h 11 and h 12 ISBN members, non-members ACE/61 BS EN ISO :2017 Thermal spraying. Zinc, aluminium and their alloys. Design considerations and quality requirements for corrosion protection systems supersedes BS EN ISO 2063:2005 ISBN STI/40 BS EN ISO :2017 Thermal spraying. Zinc, aluminium and their alloys. Execution of corrosion protection systems supersedes BS EN ISO 2063:2005 ISBN members, non-members STI/40 BS EN ISO 2411:2017 Rubber- or plastics-coated fabrics. Determination of coating adhesion supersedes BS EN ISO 2411:2000 ISBN TCI/24 BS EN ISO 2592:2017 Petroleum and related products. Determination of flash and fire points. Cleveland open cup method supersedes BS EN ISO 2592:2001 ISBN PTI/13 BS EN 2850:2017 Aerospace series. Carbon fibre thermosetting resin. Unidirectional laminates. Compression test parallel to fibre direction ISBN ACE/65 BS EN 3094:2017 Aerospace series. Sealants. Test method. Determination of the application time ISBN members, non-members ACE/61/-/6 BS EN :2017 Aerospace series. Cables, electrical, aircraft use. Test methods. Strippability and adherence of insulation to the conductor supersedes BS EN :2002 ISBN members, non-members ACE/6 BS EN 3820:2017 Aerospace series. Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated. Classification: MPa (at ambient temperature)/315 C supersedes BS EN 3820:2006 ISBN members, non-members ACE/12 BS EN ISO 3927:2017 Metallic powders, excluding powders for hardmetals. Determination of compressibility in uniaxial compression supersedes BS EN ISO 3927:2011 ISBN ISE/65 BS EN :2017 Aerospace series. Connectors, coaxial, radio frequency. Type 4, C interface. Crimp assembly version. Right angle plug. Product standard ISBN members, non-members ACE/6 BS EN :2017 Aerospace series. Tie rod with integrated bolts. Technical specification ISBN members, non-members ACE/12 BS EN 4692:2017 Aerospace series. Tie rod with integrated bolts. Locking clip ISBN ACE/12 BS EN 4693:2017 Aerospace series. Tie rod with integrated bolts. Assembly code A, B and C ISBN ACE/12 BS EN 4694:2017 Aerospace series. Tie rod with integrated bolts. Assembly code D, E and F ISBN ACE/12 BS EN 4695:2017 Aerospace series. Tie rod with integrated bolts. Assembly code G, H and K ISBN ACE/12 BS EN :2017 Aerospace series. Quick release fastening systems for non-structural and lining applications. Spring clamp stud combination ISBN members, non-members ACE/12 BS EN :2017 Aerospace series. Quick release fastening systems for non-structural and lining applications. Stud. Quick-release and locking ISBN ACE/12 BS EN :2017 Aerospace series. Quick release fastening systems for non-structural and lining applications. Spring clamp ISBN members, non-members ACE/12 BS EN :2017 Aerospace series. Quick release fastening systems for non-structural and lining applications. Retaining washer ISBN members, non-members ACE/12 BS EN ISO 5801:2017 Fans. Performance testing using standardized airways supersedes BS EN ISO 5801:2008 ISBN members, non-members MCE/17 BS EN 6075:2017 Aerospace series. Static seal elements O-Ring ethylene-propylene, moulded, phosphate ester resistant (-55 C to 107 C). Inch series ISBN ACE/69 12 Prices may be subject to change. Update Standards December 2017

13 This new standard enables clear data use statements and can help with GDPR compliance Across the world, there s a growing volume of personal data regulation asking cloud service providers (among others) to make it clear to users how their personal data is being treated. This new international standard BS ISO/IEC 19944:2017 Information technology Cloud computing Cloud services and devices: Data flow, data categories and data use was written with that in mind. It provides a way for cloud service providers to produce clear statements telling device users where their data is flowing, where it s being processed and why. The standard will be used by: Cloud service providers and customers Cloud service users and device users Anyone involved in legal, policy, technical or other implications of data flows between devices and cloud services It will be especially useful to anyone needing to demonstrate compliance with personal data regulation. Find out more shop.bsigroup.com/19944 To contact us visit shop.bsigroup.com/19944 or contact Customer Services quoting marketing reference code US19944 T F orders@bsigroup.com shop.bsigroup.com/19944 Standards and publications may also be ordered via the BSI shop at shop.bsigroup.com *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call BSI British Standards Institution 2017

14 BS EN Publications continued... BS EN 6128:2017 Aerospace series. Blind bolt, 100 flush head, high strength ISBN ACE/12 BS EN ISO 8665:2017 Small craft. Marine propulsion reciprocating internal combustion engines. Power measurements and declarations supersedes BS EN ISO 8665:2006 ISBN members, non-members GME/33 BS EN ISO 9097:2017 Small craft. Electric fans supersedes BS EN ISO 9097:1995 ISBN members, non-members GME/33 BS EN 9117:2017 Aerospace series. Delegated Product Release Verification ISBN members, non-members ACE/1 BS EN ISO :2017 Ergonomics of human-system interaction. Guidance on visual presentation of information supersedes BS EN ISO :1999 ISBN members, non-members PH/9 BS EN :2017 Aerospace series. LOTAR. LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data. Authentication and Verification ISBN ACE/1 BS EN :2017 Aerospace series. LOTAR. LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data. Terms and References ISBN ACE/1 BS EN ISO 9717:2017 Metallic and other inorganic coatings. Phosphate conversion coating of metals supersedes BS EN ISO 9717:2013 ISBN STI/33 BS EN ISO 10088:2017 Small craft. Permanently installed fuel systems supersedes BS EN ISO 10088:2013 ISBN GME/33 BS EN ISO 10239:2017 Small craft. Liquefied petroleum gas (LPG) systems supersedes BS EN ISO 10239:2014 ISBN GME/33 BS EN ISO :2017 Needle-based injection systems for medical use. Requirements and test methods. Accessibility for persons with visual impairment ISBN CH/84 BS EN ISO :2017 Paints and varnishes. Determination of resistance to cyclic corrosion conditions. Wet (salt fog)/dry/humid supersedes BS EN ISO :2006 ISBN STI/10 BS EN 13303:2017 (BS :2017) Bitumen and bituminous binders. Determination of the loss in mass after heating of industrial bitumen supersedes BS EN 13303:2009 ISBN members, non-members PTI/13 Available from the Institute of Petroleum, see the British Standards section foreword for ordering information BS EN :2017 Size designation of clothes. Size labelling based on body measurements and intervals supersedes BS EN :2013 ISBN TCI/66/-/3 BS EN 13639:2017 Determination of total organic carbon in limestone supersedes BS EN 13639:2002 ISBN B/516/12 BS EN 14157:2017 Natural stone test methods. Determination of the abrasion resistance supersedes BS EN 14157:2004 ISBN B/545 BS EN ISO 14271:2017 Resistance welding. Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds supersedes BS EN ISO 14271:2011 ISBN members, non-members WEE/-/1 BS EN ISO :2017 Petroleum and natural gas industries. Glassreinforced plastics (GRP) piping. Fabrication, installation and operation supersedes BS EN ISO :2002 ISBN members, non-members PSE/17/-/6 BS EN 15194:2017 Cycles. Electrically power assisted cycles. EPAC Bicycles supersedes BS EN 15194:2009+A1:2011 ISBN members, non-members GME/25 BS EN ISO 15378:2017 Primary packaging materials for medicinal products. Particular requirements for the application of ISO 9001:2015, with reference to good manufacturing practice (GMP) supersedes BS EN ISO 15378:2015 ISBN members, non-members CH/212 BS EN ISO 15584:2017 Small craft. Inboard petrol engines. Enginemounted fuel and electrical components supersedes BS EN ISO 15584:2001 ISBN members, non-members GME/33 BS EN ISO 15652:2017 Small craft. Remote steering systems for inboard mini jet boats supersedes BS EN ISO 15652:2005 ISBN GME/33 BS EN 16516:2017 Construction products: Assessment of release of dangerous substances. Determination of emissions into indoor air supersedes PD CEN/TS 16516:2013 ISBN members, non-members B/557 BS EN :2017 Space engineering. Interface management ISBN members, non-members ACE/68 14 Prices may be subject to change. Update Standards December 2017

15 BS EN :2017 Space engineering. Telemetry and telecommand packet utilization ISBN members, non-members ACE/68 BS EN 16755:2017 Durability of reaction to fire performance. Classes of fire-retardant treated wood products in interior and exterior end use applications ISBN B/543 BS EN :2017 Energy performance of buildings. Ventilation for buildings. Calculation methods for energy requirements of ventilation systems (Modules M5-6, M5-8, M6-5, M6-8, M7-5, M7-8). Distribution and generation supersedes BS EN 15241:2007 ISBN members, non-members RHE/2 BS EN 17007:2017 Maintenance process and associated indicators ISBN members, non-members DS/1 BS EN ISO 22829:2017 Resistance welding equipment. Transformers. Integrated transformer-rectifier units for welding guns operating at Hz supersedes BS EN ISO 22829:2008 ISBN WEE/29 BS EN ISO :2017 Geometrical product specifications (GPS). Surface texture: Areal. Software measurement standards supersedes BS EN ISO :2012 ISBN TDW/4 BS EN ISO :2017 Floating leisure articles for use on and in the water. Classification, materials, general requirements and test methods supersedes BS EN :2009+A2:2013 ISBN SW/136/8 BS EN ISO :2017 Floating leisure articles for use on and in the water. Consumer information supersedes BS EN :2009+A2:2013 ISBN SW/136/8 BS EN ISO :2017 Floating leisure articles for use on and in the water. Additional specific safety requirements and test methods for Class B devices supersedes BS EN :2010+A1:2012 ISBN SW/136/8 BS EN ISO :2017 Floating leisure articles for use on and in the water. Additional specific safety requirements and test methods for Class C devices supersedes BS EN :2009 ISBN SW/136/8 BS EN ISO :2017 Floating leisure articles for use on and in the water. Additional specific safety requirements and test methods for Class D devices supersedes BS EN :2009+A1:2013 ISBN SW/136/8 BS EN ISO :2017 Floating leisure articles for use on and in the water. Additional specific safety requirements and test methods for Class E devices supersedes BS EN :2009 ISBN SW/136/8 BS EN 50155:2017 Railway applications. Rolling stock. Electronic equipment supersedes BS EN 50155:2007 ISBN members, non-members GEL/9/2 BS EN :2017 Overhead electrical lines exceeding AC 1 kv. National Normative Aspects (NNA) for Great Britain and Northern Ireland (based on EN :2012) supersedes BS EN :2015 ISBN PEL/11 BS EN 50360:2017 Product standard to demonstrate the compliance of wireless communication devices, with the basic restrictions and exposure limit values related to human exposure to electromagnetic fields in the frequency range from 300 MHz to 6 GHz: devices used next to the ear supersedes BS EN 50360:2001+A1:2012 ISBN members, non-members GEL/106 BS EN 50401:2017 Product standard to demonstrate the compliance of base station equipment with radiofrequency electromagnetic field exposure limits (110 MHz-100 GHz), when put into service supersedes BS EN 50401:2006+A1:2011 ISBN members, non-members GEL/106 BS EN :2017 Railway applications. Energy measurement on board trains. General supersedes BS EN :2012 ISBN GEL/9 BS EN :2017 Railway applications. Energy measurement on board trains. Energy measuring supersedes BS EN :2012 ISBN members, non-members GEL/9 BS EN :2017 Railway applications. Energy measurement on board train. Data handling supersedes BS EN :2012 ISBN GEL/9 BS EN :2017 Railway applications. Energy measurement on board trains. Communication supersedes BS EN :2012 ISBN members, non-members GEL/9 BS EN :2017 Railway applications. Energy measurement on board trains. Conformity assessment supersedes BS EN :2012 ISBN GEL/9 BS EN 50566:2017 Product standard to demonstrate the compliance of wireless communication devices with the basic restrictions and exposure limit values related to human exposure to electromagnetic fields in the frequency range from 30 MHz to 6 GHz: hand-held and body mounted devices in close proximity to the human body supersedes BS EN 50566:2013 ISBN members, non-members GEL/106 Update Standards December 2017 Prices may be subject to change. 15

16 BS EN Publications continued... BS EN 50645:2017 Ecodesign requirements for small power transformers ISBN members, non-members PEL/96 BS EN :2017 Magnetic materials. Specifications for individual materials. Soft magnetic metallic materials supersedes BS EN :2009 ISBN ISE/108 BS EN :2017 Printed board assemblies. Sectional specification. Requirements for surface mount soldered assemblies supersedes BS EN :2013 ISBN EPL/501 BS EN :2017 Rotating electrical machines. Starting performance of single-speed three-phase cage induction motors supersedes BS EN :2002 ISBN PEL/2 BS EN :2017 Rotating electrical machines. Partial discharge resistant electrical insulation systems (Type II) used in rotating electrical machines fed from voltage converters. Qualification tests supersedes DD CLC/TS :2011 ISBN members, non-members PEL/2 BS EN :2017 Specifications for particular types of winding wires. Solderable fully insulated (FIW) zerodefect polyurethane enamelled round copper wire, class 180 supersedes BS EN :2012 ISBN L/-/99 BS EN :2016 Fixed capacitors for use in electronic equipment. Sectional specification. Fixed aluminium electrolytic capacitors with solid (MnO 2 ) and non-solid electrolyte supersedes BS EN :2007 ISBN members, non-members EPL/40X BS EN :2017 Fixed capacitors for use in electronic equipment. Sectional specification: Fixed tantalum capacitors with non-solid or solid electrolyte supersedes BS QC :1983 ISBN EPL/40X BS EN 60400:2017 Lampholders for tubular fluorescent lamps and starterholders supersedes BS EN 60400:2008+A2:2014 ISBN members, non-members CPL/34/2 BS EN :2017 Insulation coordination for equipment within low-voltage systems. Use of coating, potting or moulding for protection against pollution supersedes BS EN :2003+A1:2010 ISBN GEL/109 BS EN :2017 Fire hazard testing. Test flames. 1 kw pre-mixed flame. Apparatus, confirmatory test arrangement and guidance supersedes BS EN :2014 ISBN GEL/89 BS EN :2017 Photovoltaic devices. Measurement of currentvoltage characteristics of multi-junction photovoltaic (PV) devices ISBN GEL/82 BS EN :2017 Low-voltage switchgear and controlgear. Circuit-breakers supersedes BS EN :2006+A2:2013 ISBN members, non-members PEL/121/1 BS EN :2017 Safety requirements for electrical equipment for measurement, control, and laboratory use. Particular requirements for laboratory centrifuges supersedes BS EN :2006 ISBN EPL/66 BS EN :2017 Connectors for electrical and electronic equipment. Product requirements. Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to MHz supersedes BS EN :2006 ISBN members, non-members EPL/48 BS EN :2017 Electrostatics. Standard test methods for specific applications. Ionization ISBN GEL/101 BS EN 61745:2017 End-face image analysis procedure for the calibration of optical fibre geometry test sets. Introduction and roadmap for standardization supersedes BS IEC 61745:1998 ISBN GEL/86 BS EN :2017 Fibre optic interconnecting devices and passive components. Performance standard. Simplex and duplex cords with single-mode fibre and cylindrical ferrule connectors for category C. Controlled environment supersedes BS EN :2010 ISBN GEL/86/2 BS EN :2017 Fibre optic sensors. Temperature measurement. Distributed sensing ISBN GEL/86/3 BS EN :2017 Electromechanical elementary relays. Reliability. Procedure for the verification of B 10 values supersedes BS EN :2011 ISBN EPL/94 BS EN :2017 Electromechanical elementary relays. Reliability supersedes BS EN :2011 ISBN members, non-members EPL/94 BS EN :2017 Secondary cells and batteries containing alkaline or other non-acid electrolytes. Secondary sealed cells and batteries for portable applications. Nickel-Cadmium supersedes BS EN :2014 ISBN PEL/21/1 16 Prices may be subject to change. Update Standards December 2017

17 BS EN :2017 Electricity metering data exchange. The DLMS/COSEM suite. Wired and wireless M-Bus communication profiles for local and neighbourhood networks ISBN PEL/13 BS EN :2017 High-voltage switchgear and controlgear. Common specifications for alternating current switchgear and controlgear supersedes BS EN :2008+A1:2011 ISBN members, non-members PEL/17/1 BS EN :2017 EMC IC modelling. Models of integrated circuits for EMI behavioural simulation. Conducted emissions modelling (ICEM-CE) supersedes BS EN :2010 ISBN members, non-members EPL/47 BS EN :2017 Power line communication systems for power utility applications. Analogue power line carrier terminals or APLC ISBN members, non-members PEL/57 BS EN :2017 Generic specification of information on products by properties. Principles and methods supersedes DD IEC/PAS :2009 ISBN GEL/3 BS EN :2017 Standardized product ontology register and transfer by spreadsheets. Interface for activity description ISBN members, non-members GEL/3 BS EN :2017 Low-voltage switchgear and controlgear. Product data and properties for information exchange. Catalogue data supersedes BS EN 62683:2015 ISBN members, non-members PEL/121/1 BS EN :2017 Engineering data exchange format for use in industrial automation systems engineering. Automation markup language. Geometry and kinematics ISBN members, non-members AMT/7 BS EN :2017 Building intercom systems. System requirements. Building intercom systems using the internet protocol (IP) ISBN GW/1/8 BS EN :2017 Wireless power transfer. Management. Multiple device control management ISBN members, non-members EPL/100 BS EN 62920:2017 Photovoltaic power generating systems. EMC requirements and test methods for power conversion equipment ISBN members, non-members GEL/82 BS EN :2017 Power sources for a wireless communication device. Generic energy harvesting adapter module ISBN GEL/65/2 BS EN 63028:2017 Wireless Power Transfer. AirFuel Resonant Baseline System Specification (BSS) ISBN members, non-members EPL/100 BS EN 63029:2017 Audio, video multimedia systems and equipment. Multimedia e-publishing and e- book technologies. Raster-graphics image-based e-books ISBN EPL/100 BS EN 63035:2017 MIDI (Musical Instrument Digital Interface) specification 1.0 (Abridged Edition, 2015) ISBN EPL/100 BS IMPLEMENTATIONS BS Implementations comprise the ISO or IEC text without any national deviation and with front and back cover indicating the UK committee responsible. No other information will normally be added. Note: The date referenced in the identifier is the date of the international standard. BS ISO 433:2017 Conveyor belts. Marking ISBN members, non-members PRI/67 BS ISO 2135:2017 Anodizing of aluminium and its alloys. Accelerated test of light fastness of coloured anodic oxidation coatings using artificial light supersedes BS ISO 2135:2010 ISBN members, non-members STI/33 BS ISO 2528:2017 Sheet materials. Determination of water vapour transmission rate (WVTR). Gravimetric (dish) method supersedes BS :Method 820A:1996 ISBN PAI/11 BS ISO :2017 Graphic technology. Colour and transparency of printing ink sets for four-colour printing. Sheetfed and heat-set web offset lithographic printing supersedes BS ISO :2006 ISBN PAI/43 BS ISO 3108:2017 Steel wire ropes. Test method. Determination of measured breaking force ISBN members, non-members MHE/2 Update Standards December 2017 Prices may be subject to change. 17

18 BS Implementations continued... BS ISO 3297:2017 Information and documentation. International standard serial number (ISSN) supersedes BS ISO 3297:2007 ISBN IDT/2/18 BS ISO 4708:2017 Composition cork. Gasket material. Test methods supersedes BS ISO 4708:2015 ISBN members, non-members PRI/81 BS ISO 5006:2017 Earth-moving machinery. Operator s field of view. Test method and performance criteria supersedes BS ISO 5006:2006 ISBN B/513/1 BS ISO :2017 Pneumatic fluid power. Compressed air filters. Main characteristics to be included in supplier s literature and product-marking requirements supersedes BS ISO :1997 ISBN MCE/18/-/5 BS ISO :2017 Pneumatic fluid power. Compressed-air lubricators. Main characteristics to be included in supplier s literature and product-marking requirements supersedes BS ISO :2009 ISBN MCE/18/-/5 BS ISO 6526:2017 Plain bearings. Pressed bimetallic half thrust washers. Features and tolerances supersedes BS :1984 ISBN members, non-members MCE/12 Help Us to Help You! Always quote your Customer Number Don t know your number? Contact Customer Services who will be happy to check it for you BS ISO 6578:2017 Refrigerated hydrocarbon liquids. Static measurement. Calculation procedure supersedes BS 7577:1992 ISBN PTI/12 BS ISO :2017 Wheelchairs. Determination of dynamic stability of electrically powered wheelchairs supersedes BS ISO :2001 ISBN CH/173/1 BS ISO 7743:2017 Rubber, vulcanized or thermoplastic. Determination of compression stress-strain properties supersedes BS ISO 7743:2011 ISBN PRI/22 BS ISO 8478:2017 Optics and photonics. Camera lenses. Measurement of ISO spectral transmittance ISBN CPW/172 BS ISO :2017 Technical product documentation. Design for manufacturing, assembling, disassembling and end-of-life processing. General concepts and requirements supersedes BS :2006 ISBN TDW/4 BS ISO 9123:2017 Hydrometry. Stage-fall-discharge relationships supersedes BS ISO 9123:2001 ISBN CPI/113/1 BS ISO 10216:2017 Anodizing of aluminium and its alloys. Instrumental determination of image clarity of anodic oxidation coatings. Instrumental method supersedes BS ISO 10216:2010 ISBN STI/33 BS ISO 10639:2017 Plastics piping systems for pressure and nonpressure water supply. Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin ISBN members, non-members PRI/88/2 BS ISO 12669:2017 Hydraulic fluid power. Method for determining the required cleanliness level (RCL) of a system ISBN MCE/18/-/6 BS ISO :2017 Condition monitoring and diagnostics of machines. Vibration condition monitoring. Diagnostic techniques for electric motors ISBN GME/21/7 BS ISO :2017 Environmental management. Guidelines for establishing good practices for combatting land degradation and desertification. Good practices framework ISBN SES/1 BS ISO :2017 Optics and photonics. Specifications for telescopic sights. High-performance instruments supersedes BS ISO :2014 ISBN CPW/172 BS ISO :2017 Processes, data elements and documents in commerce, industry and administration. Long term signature profiles. Long term signature profiles for PDF Advanced Electronic Signatures (PAdES) ISBN IST/47/-/3 BS ISO/IEC/IEEE 15289:2017 Systems and software engineering. Content of life-cycle information items (documentation) supersedes BS ISO/IEC/IEEE 15289:2011 and BS ISO/IEC/IEEE 15289:2015 ISBN members, non-members IST/15 BS ISO :2017 Automation systems and integration. Integration of advanced process control and optimization capabilities for manufacturing systems. Activity models and information exchange ISBN members, non-members AMT/5 18 Prices may be subject to change. Update Standards December 2017

19 BS ISO/IEC/IEEE 15939:2017 Systems and software engineering. Measurement process supersedes BS ISO/IEC 15939:2007 ISBN members, non-members IST/15 BS ISO :2017 Methods for the calibration of vibration and shock transducers. Testing of magnetic field sensitivity supersedes BS :1994 ISBN GME/21/2 BS ISO :2017 Automation systems and integration. Interoperability of capability units for manufacturing application solutions. Verification and validation of interoperability among capability units ISBN AMT/5 BS ISO :2017 Graphic technology. Variable content replacement. Using PDF/X for variable content replacement (PDF/VCR-1) ISBN PAI/43 BS ISO 16673:2017 Road vehicles. Ergonomic aspects of transport information and control systems. Occlusion method to assess visual demand due to the use of in-vehicle systems supersedes BS ISO 16673:2007 ISBN AUE/12 BS ISO :2017 Sustainability in buildings and civil engineering works. Carbon metric of an existing building during use stage. Calculation, reporting and communication supersedes BS ISO 16745:2015 ISBN members, non-members B/558 BS ISO :2017 Sustainability in buildings and civil engineering works. Carbon metric of an existing building during use stage. Verification supersedes BS ISO 16745:2015 ISBN members, non-members B/558 BS ISO 17068:2017 Information and documentation. Trusted third party repository for digital records supersedes PD ISO/TR 17068:2013 ISBN IDT/2/17 BS ISO 17757:2017 Earth-moving machinery and mining. Autonomous and semi-autonomous machine system safety ISBN B/513/1 BS ISO/IEC :2017 Information technology. Radio frequency identification device conformance test methods. Test methods for air interface communications at 860 MHz to 960 MHz supersedes BS ISO/IEC :2012 ISBN members, non-members IST/34 BS ISO 18237:2017 Hydraulic fluid power. Method for evaluating water separation performance of dehydrators ISBN MCE/18/-/6 BS ISO 18322:2017 Space systems. General management requirements for space test centres ISBN ACE/68 BS ISO 18543:2017 Glass in building. Electrochromic glazings. Accelerated ageing test and requirements ISBN B/520 BS ISO 18557:2017 Characterisation principles for soils, buildings and infrastructures contaminated by radionuclides for remediation purposes ISBN members, non-members NCE/9 BS ISO 18804:2017 Rims for agricultural, forestry and construction machines supersedes BS ISO :2006 ISBN AUE/4 BS ISO 18888:2017 Gas turbine combined cycle power plants. Thermal performance tests ISBN members, non-members MCE/16 BS ISO 19224:2017 Continuous surface miners (CSM). Safety requirements ISBN MRE/1 BS ISO 19434:2017 Mining. Classification of mine accidents ISBN MRE/1 BS ISO 19581:2017 Measurement of radioactivity. Gamma emitting radionuclides. Rapid screening method using scintillation detector gamma-ray spectrometry ISBN NCE/2 BS ISO/IEC :2017 Information technology. Security techniques. Secret sharing. Fundamental mechanisms ISBN IST/33/2 BS ISO 19634:2017 Fine ceramics (advanced ceramics, advanced technical ceramics). Ceramic composites. Notations and symbols ISBN RPI/13 BS ISO :2017 Petroleum and natural gas industries. Sitespecific assessment of mobile offshore units. Floating unit ISBN B/525/12 BS ISO 19924:2017 Space systems. Acoustic testing ISBN ACE/68 Update Standards December 2017 Prices may be subject to change. 19

20 BS Implementations continued... BS ISO 20015:2017 Spherical plain bearings. Method for the calculation of static and dynamic load ratings ISBN MCE/7 BS ISO 20053:2017 Ships and marine technology. Marine environment protection. Specifications on design and selection of sorbents ISBN members, non-members SME/32 BS ISO 20057:2017 Rubber household gloves. General requirements and test methods ISBN CH/205/3 BS ISO 20154:2017 Ships and marine technology. Guidelines on vibration isolation design methods for shipboard auxiliary machinery ISBN SME/32 BS ISO 20336:2017 Solid mineral fuels. Determination of total sulfur by Coulomb titration method ISBN members, non-members PTI/16 BS ISO/IEC :2017 Information technology. User interfaces. Faceto-face speech translation. User interface ISBN ICT/-/6 BS ISO/IEC :2017 Information technology. User interface. Face-toface speech translation. System architecture and functional components ISBN ICT/-/6 BS ISO 20410:2017 Tourism and related services. Bareboat charter. Minimum service and equipment requirements ISBN SVS/2 BS ISO 20729:2017 Natural gas. Determination of sulfur compounds. Determination of total sulfur content by ultraviolet fluorescence method ISBN PTI/15 BS ISO 21070:2017 Ships and marine technology. Marine environment protection. Management and handling of shipboard garbage supersedes BS ISO 21070:2011 ISBN SME/32 BS ISO :2017 Information and documentation. Records management processes. Metadata for records. Principles supersedes BS ISO :2006 ISBN IDT/2/17 BS ISO/IEC/IEEE 24765:2017 Systems and software engineering. Vocabulary supersedes BS ISO/IEC IEEE 24765:2010 ISBN members, non-members IST/15 BS ISO 26602:2017 Fine ceramics (advanced ceramics, advanced technical ceramics). Silicon nitride materials for rolling bearing balls and rollers supersedes BS ISO 26602:2009 ISBN members, non-members RPI/13 BS ISO :2009+A1:2017 Springs. Shot peening. General procedures ISBN FME/9/3 BS ISO/IEC 27007:2017 Information technology. Security techniques. Guidelines for information security management systems auditing supersedes BS ISO/IEC 27007:2011 ISBN members, non-members IST/33/1 BS ISO/IEC 27021:2017 Information technology. Security techniques. Competence requirements for information security management systems professionals ISBN IST/33/1 BS ISO/IEC :2017 Information technology. Security techniques. Application security. Protocols and application security controls data structure ISBN IST/33/4 BS ISO/IEC :2017 Information technology. Security techniques. Electronic discovery. Code of practice for electronic discovery ISBN IST/33/4 BS ISO 27914:2017 Carbon dioxide capture, transportation and geological storage. Geological storage ISBN members, non-members PSE/265 BS ISO 28590:2017 (BS :2017) Sampling procedures for inspection by attributes. Introduction to the ISO 2859 series of standards for sampling for inspection by attributes supersedes BS :2006 ISBN SS/5 BS ISO 28593:2017 Acceptance sampling procedures by attributes. Accept-zero sampling system based on credit principle for controlling outgoing quality supersedes BS :2006 ISBN SS/5 BS ISO 28594:2017 Combined accept-zero sampling systems and process control procedures for product acceptance supersedes BS ISO 21247:2005 ISBN members, non-members SS/5 BS ISO 28597:2017 Acceptance sampling procedures by attributes. Specified quality levels in nonconforming items per million supersedes BS ISO 14560:2004 ISBN SS/5 20 Prices may be subject to change. Update Standards December 2017

21 BS ISO :2017 Acceptance sampling procedures based on the allocation of priorities principle (APP). Guidelines for the APP approach supersedes BS ISO :2005 ISBN SS/5 BS ISO :2017 Acceptance sampling procedures based on the allocation of priorities principle (APP). Coordinated single sampling plans for acceptance sampling by attributes supersedes BS ISO :2004 ISBN members, non-members SS/5 BS ISO/IEC :2017 Information technology. Automatic identification and data capture techniques. Crypto suite AES-128 security services for air interface communications ISBN members, non-members IST/34 BS ISO/IEC :2017 Information technology. Underwater acoustic sensor network (UWASN). Reference architecture ISBN IOT/1/-/2 BS ISO 35101:2017 Petroleum and natural gas industries. Arctic operations. Working environment ISBN members, non-members PSE/17 BS ISO/IEC 40180:2017 Information technology. Quality for learning, education and training. Fundamentals and reference framework. General approach ISBN members, non-members IST/43 BS IEC :2017 Digital living network alliance (DLNA) home networked device interoperability guidelines. Device Profiles ISBN EPL/100 BS IEC :2017 Digital living network alliance (DLNA) home networked device interoperability guidelines. Remote user interface. RVU ISBN EPL/100 BS IEC :2017 3D display devices. Visual inspection methods for stereoscopic displays using glasses. Ghost image ISBN EPL/47 BS IEC :2017 Flexible display devices. Environmental testing methods ISBN EPL/47 BS IEC 63038:2016 Conceptual model of standardization for multimedia car systems and equipment ISBN EPL/100 PUBLISHED DOCUMENTS PD ISO/TS :2017 Measurement of radioactivity in the environment. Air: radon 222. Determination of the diffusion coefficient in waterproof materials: membrane two-side activity concentration test method ISBN NCE/2 PD ISO/IEC TR :2017 Information technology. Generic cabling for customer premises. End-to-end link configurations ISBN ICT/-/1 PD ISO/IEC TR 15446:2017 Information technology. Security techniques. Guidance for the production of protection profiles and security targets supersedes PD ISO/IEC TR 15446:2009 ISBN members, non-members IST/33/3 PD ISO/TS 16829:2017 Non-destructive testing. Automated ultrasonic testing. Selection and application of systems ISBN WEE/46 PD CEN/TS :2017 Electronic invoicing. Syntax binding for ISO/IEC (UBL 2.1) invoice and credit note ISBN members, non-members IST/47/-/2 PD CEN/TS :2017 Electronic invoicing. Syntax binding for UN/EDIFACT INVOIC D16B ISBN members, non-members IST/47/-/2 PD CEN/TR :2017 Electronic invoicing. Result of the test of EN with respect to its practical application for an end user ISBN members, non-members IST/47/-/2 PD CEN/TR 17113:2017 Construction products. Assessment of release of dangerous substances. Radiation from construction products. Dose assessment of emitted gamma radiation ISBN members, non-members B/557 PD CEN/TR 17143:2017 Intelligent transport systems. Standards and actions necessary to enable urban infrastructure coordination to support Urban-ITS ISBN members, non-members EPL/278 To order visit Update Standards December 2017 Prices may be subject to change. 21

22 Published Documents continued... PD ISO/TR :2017 Machine tool spindles. Evaluation of spindle vibrations by measurements on non-rotating parts. Direct-driven spindles and belt-driven spindles with rolling element bearings operating at speeds between 600 r/min and r/min ISBN MTE/1/2 PD CEN/ISO TS :2017 Electronic fee collection. Charging performance. Metrics supersedes PD CEN ISO/TS :2012 ISBN EPL/278 PD ISO/TS :2017 Road vehicles. Aerosol separator performance test for internal combustion engines. Laboratory test method ISBN MCE/22 PD ISO/TS 18625:2017 Freight containers. Container Tracking and Monitoring Systems (CTMS): Requirements ISBN TW/1 PD ISO/TR 19057:2017 Nanotechnologies. Use and application of acellular in vitro tests and methodologies to assess nanomaterial biodurability ISBN members, non-members PD ISO/TR :2017 Intelligent transport systems. Framework for green ITS (G-ITS) standards. General information and use case definitions ISBN EPL/278 PD ISO/TS 20658:2017 Medical laboratories. Requirements for collection, transport, receipt, and handling of samples ISBN CH/212 PD ISO/IEC TR 22560:2017 Information technology. Sensor networks. Guidelines for design in the aeronautics industry: active air-flow control ISBN members, non-members IOT/1/-/2 PD IEC/TR :2017 Live working. Voltage detectors. Guidelines on non-contact voltage detectors (NCVD) for use at nominal voltages above 1 kv AC ISBN PEL/78 PD IEC/TR :2017 Communication networks and systems for power utility automation. Models for scheduling ISBN PEL/57 PD ISO/TR :2017 Medical device software. Validation of software for medical device quality systems ISBN members, non-members CH/62/1 PD ISO GUIDE 35:2017 Reference materials. Guidance for characterization and assessment of homogeneity and stability ISBN members, non-members RMI/1 CORRIGENDA TO BRITISH STANDARDS Most amendments are not issued separately. Those that make significant changes to a standard are incorporated into the standard which is reissued (see Updated British Standards ). British Standards which have been corrected via corrigenda are available on request, free of charge to past purchasers of the standard. All amendments and corrigenda to date of despatch are included within any main publication when ordered for the first time. The following corrigenda to British Standards were made available last month. BS 8081:2015+A1:2017 Code of practice for grouted anchors CORRIGENDUM 1 B/526 BS EN :2015 Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175 C continuous. Technical specification CORRIGENDUM 1 ACE/6 NTI/1 Please do not send confirmation of orders placed by telephone as it can lead to duplication PD IEC/PAS :2017 The Qi wireless power transfer system power class 0 specification. Interface Definitions ISBN members, non-members EPL/100 PD IEC/TR :2017 Transmitting equipment for radiocommunication. Radio-over-fibre technologies and their performance standard. System applications of radio over fibre technology ISBN BS EN ISO :2017 Paints and varnishes. Determination of resistance to cyclic corrosion conditions. Wet (salt fog)/dry/humid CORRIGENDUM 1 STI/10 BS EN 12039:2016 Flexible sheets for waterproofing. Bitumen sheets for roof waterproofing. Determination of adhesion of granules CORRIGENDUM 1 B/546 PD CEN/TR :2017 Safety of toys. Interpretations. Replies to requests for interpretation of EN 71-1, EN 71-2, EN 71-8 and EN CORRIGENDUM 1 EPL/103 CW/15 22 Prices may be subject to change. Update Standards December 2017

23 PD CEN/TR 17105:2017 Construction products. Assessment of release of dangerous substances. Guidance on the use of ecotoxicity tests applied to construction products CORRIGENDUM 1 B/557 BS EN 55011:2016+A1:2017 Industrial, scientific and medical equipment. Radio-frequency disturbance characteristics. Limits and methods of measurement CORRIGENDUM 1 GEL/210/11 UPDATED BRITISH STANDARDS The following standards have been amended and the amendments have been incorporated into an updated standard. NOTE: Updated British Standards must be reordered as the amendments are not available separately. BS :2016+A1:2017 Maritime works. General. Code of practice for assessment of actions AMENDMENT members, non-members CB/502/-/P1 BS 8418:2015+A1:2017 Installation and remote monitoring of detectoractivated CCTV systems. Code of practice AMENDMENT 1 GW/1/10 BS 8492:2016+A1:2017 Telecommunications equipment and telecommunications cabling. Code of practice for fire performance and protection AMENDMENT 1 TCT/7/2 BS EN ISO :2013+A2:2017 Garden equipment. Safety requirements for combustion-engine-powered lawnmowers. Pedestrian-controlled lawnmowers AMENDMENT 2 AGE/20 BS EN :2011+A1:2017 Railway applications. Track. Rail. Vignole railway rails 46 kg/m and above AMENDMENT members, non-members RAE/2 BS EN :2013+A1:2016 Railway applications. Gauges. General. Common rules for infrastructure and rolling stock AMENDMENT members, non-members RAE/1/-/12 BS EN ISO 16654:2001+A1:2017 Microbiology of food and animal feeding stuffs. Horizontal method for the detection of Escherichia coli O157 AMENDMENT 1 AW/9 BS EN ISO 18082:2014+A1:2017 Anaesthetic and respiratory equipment. Dimensions of non-interchangeable screwthreaded (NIST) low-pressure connectors for medical gases AMENDMENT 1 CH/121/1 BS ISO 2635:2003+A1:2017 Aircraft. Conductors for general purpose aircraft electrical cables and aerospace applications. Dimensions and characteristics AMENDMENT members, non-members ACE/6 BS ISO 3616:2001+A1:2017 Textile glass. Chopped-strand and continuousfilament mats. Determination of average thickness, thickness under load and recovery after compression AMENDMENT members, non-members PRI/42 BS ISO 6487:2015+A1:2017 Road vehicles. Measurement techniques in impact tests. Instrumentation AMENDMENT 1 AUE/7 BS ISO :2009+A1:2017 Mechanical vibration. Evaluation of machine vibration by measurements on rotating shafts. Gas turbine sets with fluid-film bearings AMENDMENT 1 GME/21/5 BS ISO :2009+A1:2017 Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts. Industrial machines with nominal power above 15 kw and nominal speeds between 120 r/min and r/min when measured in situ AMENDMENT 1 GME/21/5 BS ISO :2009+A1:2017 Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts. Gas turbine sets with fluid-film bearings AMENDMENT 1 GME/21/5 PD ISO/TS 17242:2014+A1:2017 Quasi-static calibration procedure for belt force transducers AMENDMENT 1 AUE/7 BS ISO :2014+A1:2017 Automation systems and integration. Key performance indicators (KPIs) for manufacturing operations management. Definitions and descriptions AMENDMENT members, non-members AMT/5 PD 5500:2015+A3:2017 Specification for unfired fusion welded pressure vessels AMENDMENT members, 1, non-members PVE/1 BRITISH STANDARDS REVIEWED AND CONFIRMED It is BSI policy for every standard to be reviewed by the technical committee responsible not more than five years after publication, to establish whether it is still current and, if it is not, to identify and set in hand appropriate action. Confirmation indicates the continuing currency of a standard. Where any standard in this list has been amended since publication, confirmation includes all amendments published to date. Reference to a particular amendment indicates that it is published concurrently with the confirmation. BS ISO/IEC :1998 Information technology. Open distributed processing. Reference model. Overview IST/15 BS ISO/IEC :1998 Information technology. Open distributed processing. Trading function. Specification IST/15 BS ISO/IEC :1998 Information technology. Open distributed processing. Trading function. Provision of trading function using OSI Directory service IST/15 Update Standards December 2017 Prices may be subject to change. 23

24 British Standards Withdrawn BRITISH STANDARDS WITHDRAWN If any standard in this list has been amended since publication, all amendments published to date are also withdrawn BS :1998 (ISO 2746:1998) Methods of testing vitreous enamel finishes. High voltage test for enamelled articles for service under highly corrosive conditions STI/36 BS :1998 (ISO 2746:1998) is withdrawn in favour of BS EN ISO 2746:2015. This standard is now obsolete, is not cited in any current regulations BS :Method 820A:1996 (ISO 2528:1995) Methods of testing plastics. Other properties. Determination of water vapour transmission rate (dish method) PAI/11 Superseded by BS ISO 2528:2017 BS :1984 (ISO 6526:1983) Plain bearings: metric series. Specification for dimensions and tolerances of pressed bimetallic half thrust washers MCE/12 Superseded by BS ISO 6526:2017 BS :2009 Fire extinguishing installations and equipment on premises. Commissioning and maintenance of portable fire extinguishers. Code of practice FSH/2 Superseded by BS :2017 BS 5607:1998 Code of practice for the safe use of explosives in the construction industry B/513 Superseded by BS 5607:2017 BS 5974:2010 Code of practice for the planning, design, setting up and use of temporary suspended access equipment MHE/12/7 Superseded by BS 5974:2017 BS :2006 (ISO :2006) Sampling procedures for inspection by attributes. Introduction to the BS 6001 (ISO 2859) series of standards for sampling for inspection by attributes SS/5 Superseded by BS ISO 28590:2017 BS :2006 (ISO 18414:2006) Acceptance sampling procedures for inspection by attributes. Accept-zero sampling system based on credit principle for controlling outgoing quality SS/5 Superseded by BS ISO 28593:2017 BS :2003 Code of practice for the planning, design, installation and use of permanently installed access equipment. Suspended access equipment MHE/12/7 Superseded by BS :2017 BS :1994 (ISO :1993) Calibration of vibration and shock pick-ups. Method of test for magnetic field sensitivity GME/21/2 Superseded by BS ISO :2017 BS 7577:1992 (ISO 6578:1991) Specification for calculation procedures for static measurement of refrigerated light hydrocarbon fluids PTI/12 Superseded by BS ISO 6578:2017 BS 7981:2002 Code of practice for the installation, maintenance, thorough examination and safe use of mast climbing work platforms (MCWPs) MHE/12 Superseded by BS 7981:2017 BS 8297:2000 Code of practice for Design and installation of non-loadbearing precast concrete cladding B/524 Superseded by BS 8297:2017 BS 8460:2005 Safe use of MEWPs. Code of practice MHE/12 Superseded by BS 8460:2017 BS EN 287-1:2011 Qualification test of welders. Fusion welding. Steels WEE/36 Superseded by BS EN ISO :2013 BS EN 593:2009+A1:2011 Industrial valves. Metallic butterfly valves PSE/18/3 Superseded by BS EN 593:2017 BS EN :2008 Playground equipment and surfacing. General safety requirements and test methods SW/65 Superseded by BS EN :2017 BS EN :2008 Playground equipment and surfacing. Additional specific safety requirements and test methods for swings SW/65 Superseded by BS EN :2017 BS EN :2008 Playground equipment and surfacing. Additional specific safety requirements and test methods for slides SW/65 Superseded by BS EN :2017 BS EN :2008 Playground equipment and surfacing. Additional specific safety requirements and test methods for rocking equipment SW/65 Superseded by BS EN :2017 BS EN :2003 Products and systems for the protection and repair of concrete structures. Definitions. Requirements. Quality control and evaluation of conformity. Site application of products and systems and quality control of the works B/517/8 Superseded by BS EN :2017 BS EN ISO 2063:2005 Thermal spraying. Metallic and other inorganic coatings. Zinc, aluminium and their alloys STI/40 Superseded by BS EN ISO :2017 and BS EN ISO :2017 BS EN ISO 2411:2000 Rubber or plastics-coated fabrics. Determination of coating adhesion TCI/69 Superseded by BS EN ISO 2411:2017 BS EN ISO 2592:2001 (BS :2002) Determination of flash and fire points. Cleveland open cup method PTI/13 Superseded by BS EN ISO 2592:2017 BS EN :2002 Aerospace series. Cables, electrical, aircraft use. Test methods. Strippability and adherence of insulation to the conductor ACE/6/-/2 Superseded by BS EN :2017 BS EN 3820:2006 Aerospace series. Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in titanium alloy, anodized, MoS 2 lubricated. Classification: 1100 MPa (at ambient temperature)/315 C ACE/12 Superseded by BS EN 3820: Prices may be subject to change. Update Standards December 2017

25 BS EN ISO 3927:2011 Metallic powders, excluding powders for hardmetals. Determination of compressibility in uniaxial compression ISE/65 Superseded by BS EN ISO 3927:2017 BS EN ISO 5801:2008 (BS 848-1:2007) Industrial fans. Performance testing using standardized airways MCE/17 Superseded by BS EN ISO 5801:2017 BS EN ISO 8665:2006 Small craft. Marine propulsion reciprocating internal combustion engines. Power measurements and declarations GME/33 Superseded by BS EN ISO 8665:2017 BS EN ISO 9097:1995 Small craft. Electric fans GME/33 Superseded by BS EN ISO 9097:2017 BS EN ISO :1999 Ergonomic requirements for office work with visual display terminals (VDTs). Presentation of information PH/9 Superseded by BS EN ISO :2017 BS EN ISO 9717:2013 Metallic and other inorganic coatings. Phosphate conversion coating of metals STI/33 Superseded by BS EN ISO 9717:2017 BS EN ISO 10088:2013 Small craft. Permanently installed fuel systems GME/33 Superseded by BS EN ISO 10088:2017 BS EN ISO 10239:2014 Small craft. Liquefied petroleum gas (LPG) systems GME/33 Superseded by BS EN ISO 10239:2017 BS EN ISO :2006 Paints and varnishes. Determination of resistance to cyclic corrosion conditions. Wet (salt fog)/dry/humidity STI/10 Superseded by BS EN ISO :2017 BS EN 13303:2009 (BS :2009) Bitumen and bituminous binders. Determination of the loss in mass after heating of industrial bitumen PTI/13 Superseded by BS EN 13303:2017 BS EN 13639:2002 Determination of total organic carbon in limestone B/516/12 Superseded by BS EN 13639:2017 BS EN 14157:2004 Natural stones. Determination of abrasion resistance B/545 Superseded by BS EN 14157:2017 BS EN ISO 14271:2011 Resistance welding. Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds WEE/2 Superseded by BS EN ISO 14271:2017 BS EN ISO :2002 Petroleum and natural gas industries. Glassreinforced plastics (GRP) piping. Fabrication, installation and operation PSE/17/-/6 Superseded by BS EN ISO :2017 BS EN 15194:2009+A1:2011 Cycles. Electrically power assisted cycles. EPAC Bicycles GME/25 Superseded by BS EN 15194:2017 BS EN ISO 15584:2001 Small craft. Inboard petrol engines. Enginemounted fuel and electrical components GME/33 Superseded by BS EN ISO 15584:2017 BS EN :2009+A2:2013 Floating leisure articles for use on and in the water. Classification, materials, general requirements and test methods SW/136/8 Superseded by BS EN ISO :2017 BS EN :2009+A2:2013 Floating leisure articles for use on and in the water. Consumer information SW/136/8 Superseded by BS EN ISO :2017 BS EN :2010+A1:2012 Floating leisure articles for use on and in the water. Additional specific safety requirements and test methods for Class B devices SW/136 Superseded by BS EN ISO :2017 BS EN :2009 Floating leisure articles for use on and in the water. Additional specific safety requirements and test methods for Class C devices SW/136 Superseded by BS EN ISO :2017 BS EN :2009+A1:2013 Floating leisure articles for use on and in the water. Additional specific safety requirements and test methods for Class D devices SW/136/8 Superseded by BS EN ISO :2017 BS EN :2009 Floating leisure articles for use on and in the water. Additional specific safety requirements and test methods for Class E devices SW/136 Superseded by BS EN ISO :2017 BS EN ISO 15652:2005 Small craft. Remote steering systems for inboard mini jet boats GME/33 Superseded by BS EN ISO 15652:2017 PD CEN/TS 16516:2013 Construction products. Assessment of release of dangerous substances. Determination of emissions into indoor air B/557 Superseded by BS EN 16516:2017 BS EN ISO 22829:2008 Resistance welding. Transformer-rectifier for welding guns with integrated transformers. Transformer-rectifier units operating at 1000 Hz frequency WEE/29 Superseded by BS EN ISO 22829:2017 BS EN ISO :2012 Geometrical product specifications (GPS). Surface texture: Areal. Software measurement standards TDW/4 Superseded by BS EN ISO :2017 BS EN 50155:2007 Railway applications. Electronic equipment used on rolling stock GEL/9 Superseded by BS EN 50155:2017 BS EN :2002 Power transformers and reactor fittings. Basic accessories (earthing terminal, drain and filling devices, thermometer pocket, wheel assembly) PEL/14 Superseded by BS EN :2015 BS EN :2015 Overhead electrical lines exceeding AC 1 kv. National Normative Aspects (NNA) for Great Britain and Northern Ireland (based on EN :2012) PEL/11 Superseded by BS EN :2017 BS EN 50360:2001+A1:2012 Product standard to demonstrate the compliance of mobile phones with the basic restrictions related to human exposure to electromagnetic fields (300 MHz-3 GHz) GEL/106 Superseded by BS EN 50360:2017 Update Standards December 2017 Prices may be subject to change. 25

26 British Standards Withdrawn continued... BS EN 50393:2006 Test methods and requirements for accessories for use on distribution cables of rated voltage 0,6/1,0 (1,2) kv GEL/20/17 Superseded by BS EN 50393:2015 BS EN 50401:2006+A1:2011 Product standard to demonstrate the compliance of fixed equipment for radio transmission (110 MHz-40 GHz) intended for use in wireless telecommunication networks with the basic restrictions or the reference levels related to general public exposure to radio frequency electromagnetic fields, when put into service GEL/106 Superseded by BS EN 50401:2017 BS EN :2012 Railway applications. Energy measurement on board trains. General GEL/9 Superseded by BS EN :2017 BS EN :2012 Railway applications. Energy measurement on board trains. Energy measuring GEL/9 Superseded by BS EN :2017 BS EN :2012 Railway applications. Energy measurement on board trains. Data handling GEL/9 Superseded by BS EN :2017 BS EN :2012 Railway applications. Energy measurement on board trains. Communication GEL/9 Superseded by BS EN :2017 BS EN :2012 Railway applications. Energy measurement on board trains. Conformity assessment GEL/9 Superseded by BS EN :2017 BS EN 50566:2013 Product standard to demonstrate compliance of radio frequency fields from handheld and bodymounted wireless communication devices used by the general public (30 MHz-6 GHz) GEL/106 Superseded by BS EN 50566:2017 BS EN :2002 Rotating electrical machines. Starting performance of single-speed three-phase cage induction motors PEL/2 Superseded by BS EN :2017 BS EN :2012 Specifications for particular types of winding wires. Solderable fully insulated (FIW) zerodefect polyurethane enamelled round copper wire, with nominal conductor diameter of 0, 040 mm to 1,600 mm, class 180 L/-/99 Superseded by BS EN :2017 BS EN :2007 Fixed capacitors for use in electronic equipment. Sectional specification. Aluminium electrolytic capacitors with solid (MnO 2 ) and non-solid electrolyte EPL/40X Superseded by BS EN :2016 BS EN 60400:2008+A2:2014 Lampholders for tubular fluorescent lamps and starterholders CPL/34/2 Superseded by BS EN 60400:2017 BS EN :2009 Magnetic materials. Specifications for individual materials. Soft magnetic metallic materials ISE/108 Superseded by BS EN :2017 BS EN :2010 Luminaires. Particular requirements. Lighting chains CPL/34/4 Superseded by BS EN :2015 BS EN :2003+A1:2010 Insulation coordination for equipment within low-voltage systems. Use of coating, potting or moulding for protection against pollution GEL/109 Superseded by BS EN :2017 BS EN :2005 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations. General requirements PEL/23 Superseded by BS EN :2005+A1:2013 BS EN :2014 Fire hazard testing. Test flames. 1 kw nominal pre-mixed flame: Apparatus, confirmatory test arrangement and guidance GEL/89 Superseded by BS EN :2017 BS EN :2006+A2:2013 Low-voltage switchgear and controlgear. Circuit-breakers PEL/17 Superseded by BS EN :2017 BS EN :2006 Safety requirements for electrical equipment for measurement, control, and laboratory use. Particular requirements for laboratory centrifuges EPL/66 Superseded by BS EN :2017 BS EN :2006 Connectors for electronic equipment. Product requirements. Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 1000 MHz EPL/48 Superseded by BS EN :2017 BS EN :2006 Preparation of documents used in electrotechnology. Rules GEL/3 Superseded by BS EN :2015 BS EN :2013 Printed board assemblies. Sectional specification. Requirements for surface mount soldered assemblies EPL/501 Superseded by BS EN :2017 BS EN :1994 Expression of performance of gas analyzers. Photometric analyzers GEL/65/2 Superseded by BS EN :2015 BS EN :2012 Electrostatics. Standard test methods for specific applications. Electrostatic classification of flexible intermediate bulk containers (FIBC) GEL/101 Superseded by BS EN :2012+A1:2015 BS EN :2010 Fibre optic interconnecting devices and passive components. Performance standards. Simplex and duplex cords with singlemode fibre and cylindrical ferrule connectors for category C. Controlled environment GEL/86/2 Superseded by BS EN :2017 BS EN :2011 Electromechanical elementary relays. Reliability. Procedure for the verification of B10 values EPL/94 Superseded by BS EN :2017 BS EN :2011 Electromechanical elementary relays. Reliability EPL/94 Superseded by BS EN :2017 BS EN :2014 Secondary cells and batteries containing alkaline or other non-acid electrolytes. Portable sealed rechargeable single cells. Nickel-cadmium PEL/21/1 Superseded by BS EN :2017 BS EN :2009 Digital addressable lighting interface. General requirements. System CPL/34/3 Superseded by BS EN : Prices may be subject to change. Update Standards December 2017

27 BS EN :2009 Digital addressable lighting interface. General requirements. Control gear CPL/34/3 Superseded by BS EN :2014 BS EN :2010 EMC IC modelling. Models of integrated circuits for EMI behavioural simulation. Conducted emissions modelling (ICEM-CE) EPL/47 Superseded by BS EN :2017 BS EN :2014 Digital living network alliance (DLNA) home networked device interoperability guidelines. DLNA Device Profile guidelines EPL/100 This standard is withdrawn without replacement BS EN 62683:2015 Low-voltage switchgear and controlgear. Product data and properties for information exchange PEL/121/1 Superseded by BS EN :2017 BS ISO 2135:2010 Anodizing of aluminium and its alloys. Accelerated test of light fastness of coloured anodic oxidation coatings using artificial light STI/33 Superseded by BS ISO 2135:2017 BS ISO :2006 Graphic technology. Colour and transparency of printing ink sets for four-colour printing. Sheetfed and heat-set web offset lithographic printing PAI/43 Superseded by BS ISO :2017 BS ISO 3297:2007 Information and documentation. International standard serial number (ISSN) IDT/2/18 Superseded by BS ISO 3297:2017 BS ISO :2006 Tyres (ply rating marked series) and rims for agricultural tractors and machines. Rims AUE/4 Superseded by BS ISO 18804:2017 BS ISO 4708:2015 Composition cork. Gasket material. Test methods PRI/81 Superseded by BS ISO 4708:2017 BS ISO 5006:2006 Earth-moving machinery. Operator s field of view. Test method and performance criteria B/513/1 Superseded by BS ISO 5006:2017 BS ISO :1997 Pnuematic fluid power. Compressed air filters. Main characteristics to be included in supplier s literature and product-marking requirements MCE/18 Superseded by BS ISO :2017 BS ISO :2009 Pneumatic fluid power. Compressed-air lubricators. Main characteristics to be included in supplier s literature and product-marking requirements MCE/18/-/5 Superseded by BS ISO :2017 BS ISO 6487:2015 Road vehicles. Measurement techniques in impact tests. Instrumentation AUE/7 This standard is withdrawn without replacement BS ISO :2001 Wheelchairs. Determination of dynamic stability of electric wheelchairs CH/173/1 Superseded by BS ISO :2017 BS ISO 7743:2011 Rubber, vulcanized or thermoplastic. Determination of compression stress-strain properties PRI/22 Superseded by BS ISO 7743:2017 BS ISO 9123:2001 Measurement of liquid flow in open channels. Stage-fall-discharge relationships CPI/113/1 Superseded by BS ISO 9123:2017 BS ISO 10216:2010 Anodizing of aluminium and its alloys. Instrumental determination of image clarity of anodic oxidation coatings. Instrumental method STI/33 Superseded by BS ISO 10216:2017 BS ISO :2005 Rubber hoses and hose assemblies. Wire-braidreinforced compact types for hydraulic applications. Specification. Oil-based fluid applications PRI/66 This standard is withdrawn without replacement BS ISO :2006 Rubber hoses and hose assemblies. Wire-braidreinforced compact types for hydraulic applications. Specification. Water-based fluid applications PRI/66 This standard is withdrawn without replacement BS ISO :2005 Acceptance sampling procedures based on the allocation of priorities principle (APP). Guidelines for the APP approach SS/5 Superseded by BS ISO :2017 BS ISO :2004 Acceptance sampling procedures based on the allocation of priorities principles (APP). Coordinated single sampling plans for acceptance sampling by attributes SS/5 Superseded by BS ISO :2017 BS ISO :2014 Optics and photonics. Specifications for telescopic sights. High-performance instruments CPW/172 Superseded by BS ISO :2017 BS ISO 14560:2004 Acceptance sampling procedures by attributes. Specified quality levels in nonconforming items per million SS/5 Superseded by BS ISO 28597:2017 BS ISO/IEC/IEEE 15289:2011 Systems and software engineering. Content of life-cycle information products (documentation) IST/15 Superseded by BS ISO/IEC/IEEE 15289:2017 PD ISO/IEC TR 15446:2009 Information technology. Security techniques. Guide for the production of protection profiles and security targets IST/33/3 Superseded by PD ISO/IEC TR 15446:2017 BS ISO/IEC 15939:2007 Systems and software engineering. Measurement process IST/15 Superseded by BS ISO/IEC/IEEE 15939:2017 BS ISO 16673:2007 Road vehicles. Ergonomic aspects of transport information and control systems. Occlusion method to assess visual demand due to the use of in-vehicle systems AUE/12 Superseded by BS ISO 16673:2017 BS ISO 16745:2015 Environmental performance of buildings. Carbon metric of a building. Use stage B/558 Superseded by BS ISO :2017 and BS ISO :2017 PD ISO/TR 17068:2013 Information and documentation. Trusted third party repository for digital records IDT/2/17 Superseded by BS ISO 17068:2017 PD CEN ISO/TS :2012 Electronic fee collection. Charging performance. Metrics EPL/278 Superseded by PD CEN/ISO TS :2017 Update Standards December 2017 Prices may be subject to change. 27

28 British Standards Withdrawn continued... BS ISO/IEC :2012 Information technology. Radio frequency identification device conformance test methods. Test methods for air interface communications at 860 MHz to 960 MHz IST/34 Superseded by BS ISO/IEC :2017 BS ISO 21070:2011 Ships and marine technology. Marine environment protection. Management and handling of shipboard garbage SME/32 Superseded by BS ISO 21070:2017 BS ISO 21247:2005 Combined accept-zero sampling systems and process control procedures for product acceptance SS/5 Superseded by BS ISO 28594:2017 BS ISO :2006 Information and documentation. Records management processes. Metadata for records. Principles IDT/2/17 Superseded by BS ISO :2017 BS ISO/IEC/IEEE 24765:2010 Systems and software engineering. Vocabulary IST/15 Superseded by BS ISO/IEC/IEEE 24765:2017 BS ISO 26602:2009 Fine ceramics (advanced ceramics, advanced technical ceramics). Silicon nitride materials for rolling bearing balls RPI/13 Superseded by BS ISO 26602:2017 BS ISO/IEC 27005:2011 Information technology. Security techniques. Information security risk management IST/33/1 Superseded by BS :2017 BS ISO/IEC 27007:2011 Information technology. Security techniques. Guidelines for information security management systems auditing IST/33/1 Superseded by BS ISO/IEC 27007:2017 DD CLC/TS :2011 Rotating electrical machines. Qualification and acceptance tests for partial discharge resistant electrical insulation systems (Type II) used in rotating electrical machines fed from voltage converters PEL/2 Superseded by BS EN :2017 BS IEC 61745:1998 End-face image analysis procedure for the calibration of optical fibre geometry test sets GEL/86 Superseded by BS EN 61745:2017 DD IEC/PAS :2009 Generic specification of information on products. Principles and methods GEL/3 Superseded by BS EN :2017 BRITISH STANDARDS UNDER REVIEW The following British Standards implement International and/or European Standards which are currently under review to see if they should be confirmed, revised or withdrawn. Comments should be sent to Debbie Stead, Head of Committee Service Centre and International Secretariat, BSI Group, 389 Chiswick High Road, London W4 4AL or via to by 31 January 2018, in order to be considered by the relevant UK Committee. BS :1983 (ISO 4219:1979) Methods for measurement of air pollution. Sampling equipment used for the determination of gaseous sulphur compounds in ambient air EH/2 BS :1987 (ISO 7996:1985) Methods for measurement of air pollution. Determination of the mass concentration of nitrogen oxides in ambient air: chemiluminescence method EH/2 BS :1998 (ISO 3839:1996) Methods of test for petroleum and its products. Petroleum products. Determination of bromine number of distillates and aliphatic olefins. Electrometric method PTI/13 BS :1998 Methods of test for petroleum and its products. Determination of saponification number. Colour-indicator titration method PTI/13 BS :1995 (ISO 10478:1994) Methods of test for petroleum and its products. Petroleum products. Determination of aluminium and silicon in fuel oils. Inductively coupled plasma emission and atomic absorption spectroscopy methods PTI/13 BS :1996 (ISO 8691:1994) Methods of test for petroleum and its products. Petroleum products. Low levels of vanadium in liquid fuels. Determination by flameless atomic absorption spectrometry after ashing PTI/13 BS :1978 (ISO 4238:1976) Cinematography. Common to more than one film gauge. Printing. Specification for optical printing ratios for enlargement and reduction of motion-picture film images CPW/36 BS :2000 (ISO 12979:1999) Methods of sampling and test for carbonaceous materials used in aluminium manufacture CII/24 BS :2000 (ISO 10238:1999) Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch CII/24 BS :1997 (ISO 8658:1997) Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of trace elements in green and calcined coke by flame atomic absorption spectroscopy CII/24 BS :1995 (ISO 9406:1995) Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of volatile matter content CII/24 BS :1997 (ISO 10142:1996) Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of grain stability of calcined coke using a laboratory vibration mill CII/24 BS :2001 (ISO 5931:2000) Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke CII/24 BS :1999 (ISO :1999) Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrodes CII/24 BS :1999 (ISO :1999) Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrodes CII/24 28 Prices may be subject to change. Update Standards December 2017

29 BS :2000 (ISO 11713:2000) Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrodes CII/24 BS :1997 (ISO :1997) Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Multielement methods. Determination of nickel, copper and cobalt contents by inductively coupled plasma atomic emission spectrometric method. General requirements and sample dissolution ISE/102 BS :1997 (ISO :1997) Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Multielement methods. Determination of nickel, copper and cobalt contents by inductively coupled plasma atomic emission spectrometric method. Determination of nickel content ISE/102 BS :1997 (ISO :1997) Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Multielement methods. Determination of nickel, copper and cobalt contents by inductively coupled plasma atomic emission spectrometric method. Determination of copper content ISE/102 BS :1997 (ISO :1997) Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Multielement methods. Determination of nickel, copper and cobalt contents by inductively coupled plasma atomic emission spectrometric method. Determination of cobalt content ISE/102 BS 6794:1986 (ISO 8002:1986) Method for reporting measured vibration data for land vehicles GME/21/5 BS :1991 (ISO 8927:1991) Operation and maintenance of earth-moving machinery. Glossary for machine availability B/513/1 BS 7427:1991 (ISO 5647:1990) Method for determination of titanium dioxide content of paper and board PAI/11 BS 7472:1991 (ISO 9382:1990) Classification for shipborne barges of all series SME/32 BS :1993 (ISO :1992) Building construction. Expression of users requirements. Acoustical requirements CB/101 BS EN 71-10:2005 Safety of toys. Organic chemical compounds. Sample preparation and extraction CW/15 BS EN 71-11:2005 Safety of toys. Organic chemical compounds. Methods of analysis CW/15 BS EN ISO 186:2002 Paper and board. Sampling to determine average quality PAI/11 BS EN :2007 Gas heated catering equipment. Specific requirements. Chargrills GSE/19 BS EN 241:2000 (BS :2001) Methods of test for petroleum and its products. Liquid petroleum products. Determination of sodium content. Atomic absorption spectrometric method PTI/13 BS EN ISO 284:2012 Conveyor belts. Electrical conductivity. Specification and test method PRI/67 BS EN 361:2002 Personal protective equipment against falls from a height. Full body harnesses PH/5 BS EN 450-1:2012 Fly ash for concrete. Definition, specifications and conformity criteria B/517/4 BS EN 572-2:2012 Glass in building. Basic soda lime silicate glass products. Float glass B/520 BS EN 572-3:2012 Glass in building. Basic soda lime silicate glass products. Polished wired glass B/520 BS EN 572-4:2012 Glass in building. Basic soda lime silicate glass products. Drawn sheet glass B/520 BS EN 572-5:2012 Glass in building. Basic soda lime silicate glass products. Patterned glass B/520 BS EN 572-6:2012 Glass in building. Basic soda lime silicate glass products. Wired patterned glass B/520 BS EN 572-7:2012 Glass in building. Basic soda lime silicate glass products. Wired or unwired channel shaped glass B/520 BS EN ISO 638:2008 Paper, board and pulps. Determination of dry matter content. Oven-drying method PAI/11 BS EN 650:2012 Resilient floor coverings. Polyvinyl chloride floor coverings on jute backing or on polyester felt backing or on a polyester felt with a polyvinyl chloride backing. Specification PRI/3 BS EN 795:2012 Personal fall protection equipment. Anchor devices PH/5 BS EN 846-5:2012 Methods of test for ancillary components for masonry. Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (couplet test) B/519/3 BS EN 846-6:2012 Methods of test for ancillary components for masonry. Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (single end test) B/519/3 BS EN 846-7:2012 Methods of test for ancillary components for masonry. Determination of shear load capacity and load displacement characteristics of shear ties and slip ties (couplet test for mortar joint connections) B/519/3 BS EN :2012 Methods of test for ancillary components for masonry. Determination of the initial shear strength between the prefabricated part of a composite lintel and the masonry above it B/519/3 BS EN 890:2012 Chemicals used for treatment of water intended for human consumption. Iron (III) sulfate solution CII/59 BS EN ISO/IEC 27037:2016 Information technology. Security techniques. Guidelines for identification, collection, acquisition and preservation of digital evidence IST/33/4 Update Standards December 2017 Prices may be subject to change. 29

30 British Standards Under Review continued... BS EN :2012 Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines. Tissue making machines MCE/3/9 BS EN :2012 Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines. Coating machines MCE/3/9 BS EN :2012 Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines. Roll handling systems MCE/3/9 BS EN :2007 Glass in building. Mirrors from silver-coated float glass for internal use. Definitions, requirements and test methods B/520 BS EN :2008 Glass in building. Mirrors from silver-coated float glass for internal use. Evaluation of conformity; product standard B/520 BS EN :2007 Glass in building. Glass blocks and glass pavers. Evaluation of conformity. Product standard B/520 BS EN :2008 Paints and varnishes. Coating materials and coating systems for exterior masonry and concrete. Determination of liquid water permeability STI/28 BS EN :2002 Paints and varnishes. Coating materials and coating systems for exterior masonry and concrete. Determination of carbon dioxide permeability STI/28 BS EN :2000 Glass in building. Determination of the bending strength of glass. Fundamentals of testing glass B/520/4 BS EN :2000 Glass in building. Determination of the bending strength of glass. Coaxial double ring test on flat specimens with large test surface areas B/520/4 BS EN :2000 Glass in building. Determination of the bending strength of glass. Test with specimen supported at two points (four point bending) B/520/4 BS EN :2000 Glass in building. Determination of the bending strength of glass. Testing of channel shaped glass B/520/4 BS EN :2000 Glass in building. Determination of the bending strength of glass. Coaxial double ring test on flat specimens with small test surface areas B/520/4 BS EN :2007 Identification card systems. Man-machine interface. Coding of user requirements for people with special needs IST/17 BS EN :2007 Thermal spraying. Acceptance inspection of thermal spraying equipment. General requirements STI/40 BS EN :2007 Thermal spraying. Acceptance inspection of thermal spraying equipment. Flame spraying including HVOF STI/40 BS EN :2007 Thermal spraying. Acceptance inspection of thermal spraying equipment. Arc spraying STI/40 BS EN :2007 Thermal spraying. Acceptance inspection of thermal spraying equipment. Plasma spraying STI/40 BS EN :2007 Thermal spraying. Acceptance inspection of thermal spraying equipment. Manipulator systems STI/40 BS EN :2007 Thermal spraying. Acceptance inspection of thermal spraying equipment. Powder feed system STI/40 BS EN 1486:2007 Protective clothing for fire-fighters. Test methods and requirements for reflective clothing for specialized fire-fighting PH/3/2 BS EN 1497:2007 Personal fall protection equipment. Rescue harnesses PH/5 BS EN ISO 1524:2013 Paints, varnishes and printing inks. Determination of fineness of grind STI/10 BS EN 1614:2006 Health informatics. Representation of dedicated kinds of property in laboratory medicine IST/35 BS EN :2002 Tests for chemical properties of aggregates. Preparation of eluates by leaching of aggregates B/502/6 BS EN :2012 Tests for chemical properties of aggregates. Sorting test to determine metal content of Municipal Incinerator Bottom Ash (MIBA) Aggregates B/502/6 BS EN :2012 Safety of woodworking machines. Circular sawing machines. Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading MTE/23 BS EN ISO :2012 Monolithic (unshaped) refractory products. Sampling for testing RPI/1 BS EN ISO :2012 Monolithic (unshaped) refractory products. Characterization as received RPI/1 BS EN ISO :2012 Monolithic (unshaped) refractory products. Determination of consistency of castables RPI/1 BS EN ISO :2012 Monolithic (unshaped) refractory products. Preparation and treatment of test pieces RPI/1 BS EN ISO :2012 Monolithic (unshaped) refractory products. Measurement of physical properties RPI/1 BS EN ISO :2012 Monolithic (unshaped) refractory products. Tests on pre-formed shapes RPI/1 BS EN ISO :2012 Monolithic (unshaped) refractory products. Determination of complementary properties RPI/1 BS EN 1936:2006 Natural stone test methods. Determination of real density and apparent density, and of total and open porosity B/545 BS EN ISO 2151:2008 Acoustics. Noise test code for compressors and vacuum pumps. Engineering method (Grade 2) MCE/8 BS EN ISO 2409:2013 Paints and varnishes. Cross-cut test STI/10 30 Prices may be subject to change. Update Standards December 2017

31 BS EN ISO 2810:2004 Paints and varnishes. Natural weathering of coatings. Exposure and assessment STI/10 BS EN ISO :2012 Paints and varnishes. Determination of resistance to liquids. Method using an absorbent medium STI/10 BS EN ISO 3059:2012 Non-destructive testing. Penetrant testing and magnetic particle testing. Viewing conditions WEE/46 BS EN ISO :2013 Paints and varnishes. Determination of the percentage volume of non-volatile matter. Method using a coated test panel to determine non-volatile matter and to determine dry film density by the Archimedes principle STI/10 BS EN ISO 3661:2010 (ISO 3661:1977) End-suction centrifugal pumps. Baseplate and installation dimensions MCE/6 BS EN ISO 4120:2007 Sensory analysis. Methodology. Triangle test AW/12 BS EN ISO 4136:2012 Destructive tests on welds in metallic materials. Transverse tensile test WEE/46 BS EN ISO :2012 Petroleum and related products. Determination of the corrosion resistance of fire-resistant hydraulic fluids. Water-containing fluids MCE/18/-/16 BS EN ISO :2012 Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance. Assessment of degree of delamination and corrosion around a scribe or other artificial defect STI/10 BS EN ISO 5079:1996 Textiles. Fibres. Determination of breaking force and elongation at break of individual fibres TCI/24 BS EN ISO 5674:2009 Tractors and machinery for agriculture and forestry. Guards for power take-off (PTO) driveshafts. Strength and wear tests and acceptance criteria AGE/6 BS EN ISO 5802:2008+A1:2015 (BS 848-3:2001) Industrial fans. Performance testing in situ RHE/2 BS EN ISO 6556:2012 Laboratory glassware. Filter flasks LBI/1/2 BS EN ISO :2012 Corrosion of metals and alloys. Stress corrosion testing. General guidance on testing procedures ISE/NFE/8 BS EN ISO :2014 Corrosion of metals and alloys. Stress corrosion testing. Reverse U-bend method ISE/NFE/8 BS EN ISO :2004 (BS 7079-B5:2004) Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness. Measurement of chloride on steel surfaces prepared for painting (ion detection tube method) STI/21 BS EN ISO 8586:2014 Sensory analysis. General guidelines for the selection, training and monitoring of selected assessors and expert sensory assessors AW/12 BS EN ISO 8795:2001 Plastics piping systems for the transport of water intended for human consumption. Migration assessment. Determination of migration values of plastics pipes and fittings and their joints PRI/88/4 BS EN ISO 9016:2012 Destructive tests on welds in metallic materials. Impact tests. Test specimen location, notch orientation and examination WEE/46 BS EN ISO 9080:2012 Plastics piping and ducting systems. Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation PRI/88/4 BS EN ISO :2009 Paints and varnishes. Drying tests. Determination of through-dry state and through-dry time STI/10 BS EN ISO :2012 Paints and varnishes. Drying tests. Test using a mechanical recorder STI/10 BS EN ISO :2012 Paints and varnishes. Drying tests. Modified Bandow-Wolff test STI/10 BS EN ISO :2012 Paints and varnishes. Drying tests. Print-free test STI/10 BS EN ISO :2005 Optics and optical instruments. Test lenses for calibration of focimeters. Test lenses for focimeters used for measuring contact lenses CH/172/6 BS EN ISO 9514:2005 Paints and varnishes. Determination of the pot life of multicomponent coating systems. Preparation and conditioning of samples and guidelines for testing STI/10 BS EN ISO 9886:2004 Ergonomics. Evaluation of thermal strain by physiological measurements PH/9 BS EN 10341:2006 Cold rolled electrical non-alloy and alloy steel sheet and strip delivered in the semi-processed state ISE/108 BS EN ISO :2012 Diagrams for the chemical and petrochemical industry. Graphical symbols TDW/4 BS EN ISO 10700:1995 Steel and iron. Determination of manganese content. Flame atomic absorption spectrometric method ISE/102 BS EN ISO 10723:2012 Natural gas. Performance evaluation for analytical systems PTI/15 BS EN ISO :2012 Health informatics. Personal health device communication. Device specialization. Basic electrocardiograph (ECG) (1- to 3-lead ECG) IST/35 BS EN ISO :2012 Hand-held non-electric power tools. Safety requirements. Drills and tappers MCE/8/-/2 BS EN ISO :2012 Hand-held non-electric power tools. Safety requirements. Non-rotary percussive power tools MCE/8/-/2 BS EN ISO :2012 Hand-held non-electric power tools. Safety requirements. Assembly power tools for threaded fasteners MCE/8/-/2 BS EN ISO :2012 Hand-held non-electric power tools. Safety requirements. Circular, oscillating and reciprocating saws MCE/8/-/2 Update Standards December 2017 Prices may be subject to change. 31

32 British Standards Under Review continued... BS EN ISO 11641:2012 Leather. Tests for colour fastness. Colour fastness to perspiration TCI/69 BS EN ISO 11642:2012 Leather. Tests for colour fastness. Colour fastness to water TCI/69 BS EN ISO :2013 Paints and varnishes. Determination of resistance to cyclic corrosion conditions. Wet (salt fog)/dry/humidity/uv light STI/10 BS EN :2012 Gas infrastructure. Pipelines for maximum operating pressure up to and including 16 bar. General functional requirements GSE/33 BS EN :2012 Gas infrastructure. Pipelines for maximum operating pressure up to and including 16 bar. Specific functional requirements for polyethylene (MOP up to and including 10 bar) GSE/33 BS EN :2012 Gas infrastructure. Pipelines for maximum operating pressure up to and including 16 bar. Specific functional requirements for renovation GSE/33 BS EN 12170:2002 Heating systems in buildings. Procedure for the preparation of documents for operation, maintenance and use. Heating systems requiring a trained operator RHE/24 BS EN 12171:2002 Heating systems in buildings. Procedure for the preparation of documents for operation, maintenance and use. Heating systems not requiring a trained operator RHE/24 BS EN :2002 Rubber- or plastics-coated fabrics. Accelerated ageing tests. Physical ageing: effect of light or weathering TCI/69 BS EN :2002 Rubber- or plastics-coated fabrics. Accelerated ageing tests. Environmental ageing TCI/69 BS EN 12327:2012 Gas infrastructure. Pressure testing, commissioning and decommissioning procedures. Functional requirements GSE/33 BS EN :2002 Rubber- or plastics-coated fabrics. Determination of bursting strength. Hydraulic method TCI/69 BS EN :2012 Gas meters. Conversion devices. Energy conversion GSE/25 BS EN :2012 Testing concrete in structures. Non-destructive testing. Determination of rebound number B/517/1 BS EN ISO :2012 Tissue paper and tissue products. Determination of wet ball burst strength PAI/11 BS EN 12747:1999 Footwear. Test methods for insoles. Abrasion resistance TCI/69 BS EN 12800:2000 Footwear. Test methods for insoles. Dimensional stability TCI/69 BS EN 12841:2006 Personal fall protection equipment. Rope access systems. Rope adjustment devices PH/5 BS EN :2000 Colouring materials in plastics. Determination of colour stability to heat during processing of colouring materials in plastics. General introduction STI/1 BS EN :2000 Colouring materials in plastics. Determination of colour stability to heat during processing of colouring materials in plastics. Determination by injection moulding STI/1 BS EN :2000 Colouring materials in plastics. Determination of colour stability to heat during processing of colouring materials in plastics. Determination by oven test STI/1 BS EN :2000 Colouring materials in plastics. Determination of colour stability to heat during processing of colouring materials in plastics. Determination by two-roll milling STI/1 BS EN ISO 12922:2012 Lubricants, industrial oils and related products (class L). Family H (Hydraulic systems). Specifications for hydraulic fluids in categories HFAE, HFAS, HFB, HFC, HFDR and HFDU MCE/18/-/16 BS EN ISO 13032:2012 (BS :2012) Petroleum products. Determination of low concentration of sulfur in automotive fuels. Energy-dispersive X-ray fluorescence spectrometric method PTI/13 BS EN ISO 13076:2012 Paints and varnishes. Lighting and procedure for visual assessments of coatings STI/10 BS EN 13095:2000 Biotechnology. Performance criteria for off-gas systems BTI/1 BS EN ISO 13119:2012 Health informatics. Clinical knowledge resources. Metadata IST/35 BS EN ISO 13129:2012 Paints and varnishes. Electrochemical measurement of the protection provided to steel by paint coatings. Current interrupter (CI) technique, relaxation voltammetry (RV) technique and DC transient (DCT) measurements STI/10 BS EN ISO 13174:2012 Cathodic protection of harbour installations GEL/603 BS EN 13248:2002 Cookware. Coffee makers for domestic use with an independent heat source. Definitions, requirements and test methods CW/9 BS EN 13267:2001 Surface active agents. Determination of water content. Karl Fischer method CII/34 BS EN ISO 13287:2012 Personal protective equipment. Footwear. Test method for slip resistance PH/1 BS EN ISO 13293:2012 Recreational diving services. Requirements for gas blender training programmes SVS/2/4 BS EN :2001 Biotechnology. Performance criteria for vessels. General performance criteria BTI/1 BS EN :2001 Biotechnology. Performance criteria for vessels. Glass pressure vessels BTI/1 32 Prices may be subject to change. Update Standards December 2017

33 BS EN :2001 Biotechnology. Performance criteria for vessels. Bioreactors BTI/1 BS EN :2001 Biotechnology. Performance criteria for vessels. Kill tanks BTI/1 BS EN :2001 Biotechnology. Performance criteria for vessels. Chromatography columns BTI/1 BS EN :2001 Biotechnology. Performance criteria for piping and instrumentation. General performance criteria BTI/1 BS EN :2001 Biotechnology. Performance criteria for piping and instrumentation. Sampling and inoculation devices BTI/1 BS EN :2001 Biotechnology. Performance criteria for piping and instrumentation. Tubes and pipes BTI/1 BS EN :2001 Biotechnology. Performance criteria for piping and instrumentation. Equipment probes BTI/1 BS EN 13360:2002 Rubber- or plastics-coated fabrics. Terminology TCI/69 BS EN ISO :1998 Periodontal curettes, dental scalers and excavators. Dental excavators. Discoid type CH/106/4 BS EN :2002 Size designation of clothes. Primary and secondary dimensions TCI/66 BS EN :2002 Coil coated metals. Test methods. Resistance to staining STI/21 BS EN :2003 Ambient air quality. Diffusive samplers for the determination of concentrations of gases and vapours. Requirements and test methods. Guide to selection, use and maintenance EH/2/3 BS EN 13583:2012 Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of hail resistance B/546 BS EN ISO 13632:2012 Binders for paints and varnishes. Rosin. Sampling and sample preparation for colour measurement STI/10 BS EN ISO 13705:2012 Petroleum, petrochemical and natural gas industries. Fired heaters for general refinery service PSE/17/-/6 BS EN 13723:2002 (BS :2002) Methods of test for petroleum and its products. Petroleum products. Determination of low lead contents in gasolines. Wavelength-dispersive X- ray fluorescence spectrometry (XRF) PTI/13 BS EN 13750:2002 Domestic water kettles for use on top of stove, cooker or hob. Requirements and test methods CW/9 BS EN 13770:2002 Textiles. Determination of the abrasion resistance of knitted footwear garments TCI/24 BS EN 13792:2002 Colour coding of taps and valves for use in laboratories LBI/1/1 BS EN 13809:2003 Tourism services. Travel agencies and tour operators. Terminology SVS/2 BS EN 13844:2002 Textiles. Monofilaments. Determination of thermal shrinkage TCI/24 BS EN :2002 Methods of test for screed materials. Sampling, making and curing specimens for test CB/300 BS EN :2002 Methods of test for screed materials. Determination of flexural and compressive strength CB/300 BS EN :2002 Methods of test for screed materials. Determination of wear resistance-bca CB/300 BS EN :2003 Methods of test for screed materials. Determination of wear resistance to rolling wheel of screed material for wearing layer CB/300 BS EN :2002 Methods of test for screed materials. Determination of surface hardness CB/300 BS EN :2002 Methods of test for screed materials. Determination of bond strength CB/300 BS EN ISO 13968:2008 Plastics piping and ducting systems. Thermoplastics pipes. Determination of ring flexibility PRI/88/4 BS EN ISO 14015:2010 Environmental management. Environmental assessment of sites and organizations (EASO) SES/1/2 BS EN 14036:2003 Child use and care articles. Baby bouncers. Safety requirements and test methods CW/1 BS EN ISO 14045:2012 Environmental management. Eco-efficiency assessment of product systems. Principles, requirements and guidelines SES/1/5 BS EN 14056:2003 Laboratory furniture. Recommendations for design and installation LBI/1/1 BS EN ISO 14159:2008 Safety of machinery. Hygiene requirements for the design of machinery MCE/3 BS EN 14211:2012 Ambient air. Standard method for the measurement of the concentration of nitrogen dioxide and nitrogen monoxide by chemiluminescence EH/2/3 BS EN 14233:2002 Materials and articles in contact with foodstuffs. Plastics. Determination of temperature of plastics materials and articles at the plastics/food interface during microwave and conventional oven heating in order to select the appropriate temperature for migration testing CW/47/1 BS EN ISO 14268:2012 Leather. Physical and mechanical tests. Determination of water vapour permeability TCI/69 BS EN ISO 14284:2002 Steel and iron. Sampling and preparation of samples for the determination of chemical composition ISE/102 Update Standards December 2017 Prices may be subject to change. 33

34 British Standards Under Review continued... BS EN 14491:2012 Dust explosion venting protective systems EXL/23 BS EN :2012 Railway applications. Track. Flash butt welding of rails. Welding in association with crossing construction RAE/2 BS EN ISO 14596:2007 (BS :2007) Petroleum products. Determination of sulfur content. Wavelength-dispersive X-ray fluorescence spectrometry PTI/13 BS EN ISO 14597:1999 (BS :1999) Petroleum products. Determination of vanadium and nickel content. Wavelengthdispersive X-ray fluorescence spectrometry PTI/13 BS EN 14602:2012 Footwear. Test methods for the assessment of ecological criteria TCI/69 BS EN ISO 14604:2016 Fine ceramics (advanced ceramics, advanced technical ceramics). Methods of test for ceramic coatings. Determination of fracture strain RPI/13 BS EN 14625:2012 Ambient air. Standard method for the measurement of the concentration of ozone by ultraviolet photometry EH/2/3 BS EN 14626:2012 Ambient air. Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy EH/2/3 BS EN ISO 14629:2016 Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of flowability of ceramic powders RPI/13 BS EN :2007 Determination of the elasticity of fabrics. Multiaxial tests TCI/24 BS EN ISO 14732:2013 Welding personnel. Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials WEE/36 BS EN 14753:2007 Safety of machinery. Safety requirements for machinery and equipment for continuous casting of steel MCE/23 BS EN 14799:2007 Air filters for general air cleaning. Terminology MCE/21/3 BS EN :2006 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media. Coatings on concrete components ISE/110 BS EN ISO :2012 Immersion suits. Constant wear suits, requirements including safety PH/3/6 BS EN ISO :2012 Immersion suits. Abandonment suits, requirements including safety PH/3/6 BS EN ISO :2012 Immersion suits. Test methods PH/3/6 BS EN ISO 15091:2012 Paints and varnishes. Determination of electrical conductivity and resistance STI/10 BS EN 15109:2006 Surface active agents. Determination of the active matter content of alkylamidopropylbetaines CII/34 BS EN ISO 15147:2012 Light conveyor belts. Tolerances on widths and lengths of cut light conveyor belts PRI/67 BS EN :2012 Mountaineering equipment. Braking devices. Braking devices with manually assisted locking, safety requirements and test methods SW/136/5 BS EN :2012 Mountaineering equipment. Braking devices. Manual braking devices, safety requirements and test methods SW/136/5 BS EN 15178:2007 Elements for the identification of products in emergency enquiries PKW/0 BS EN ISO :2014 Paints and varnishes. Determination of release rate of biocides from antifouling paints. Determination of tralopyril release rate by quantitation of its degradation product in the extract STI/10 BS EN ISO 15184:2012 Paints and varnishes. Determination of film hardness by pencil test STI/10 BS EN ISO 15189:2012 Medical laboratories. Requirements for quality and competence CH/212 BS EN 15197:2007 Wood-based panels. Flaxboards. Specifications B/541 BS EN 15250:2007 Slow heat release appliances fired by solid fuel. Requirements and test methods RHE/28 BS EN 15334:2007 Sanitary appliances. Methacrylic dispersions of high filler content B/503 BS EN :2007 Thermal spraying. Safety requirements for thermal spraying equipment. Gas control units STI/40 BS EN 15340:2007 Thermal spraying. Determination of shear load resistance of thermally sprayed coatings STI/40 BS EN ISO 15350:2010 Steel and iron. Determination of total carbon and sulfur content. Infrared absorption method after combustion in an induction furnace (routine method) ISE/102 BS EN :2012 Railway applications. Axlebox condition monitoring. Interface and design requirements. Performance and design requirements of onboard systems for temperature monitoring RAE/3/-/5 BS EN 15445:2008 Fugitive and diffuse emissions of common concern to industry sectors. Qualification of fugitive dust sources by reverse dispersion modelling EH/2/1 BS EN 15446:2008 Fugitive and diffuse emissions of common concern to industry sectors. Measurement of fugitive emission of vapours generating from equipment and piping leaks EH/2/1 BS EN 15450:2007 Heating systems in buildings. Design of heat pump heating systems RHE/24 BS EN 15469:2007 Petroleum products. Test method for free water in liquefied petroleum gas by visual inspection PTI/15 34 Prices may be subject to change. Update Standards December 2017

35 BS EN 15520:2007 Thermal spraying. Recommendations for constructional design of components with thermally sprayed coatings STI/40 BS EN ISO :2004 Ships and marine technology. Drainage systems on ships and marine structures. Drainage of decks, cargo spaces and swimming pools SME/32 BS EN 16258:2012 Methodology for calculation and declaration of energy consumption and GHG emissions of transport services (freight and passengers) SEM/1 BS EN ISO 15528:2013 Paints, varnishes and raw materials for paints and varnishes. Sampling STI/10 BS EN ISO :2014 Petroleum, petrochemical and natural gas industries. Cathodic protection of pipeline transportation systems. Offshore pipelines GEL/603 BS EN 15629:2008 Steel static storage systems. Specification of storage equipment MHE/8 BS EN 15635:2008 Steel static storage systems. Application and maintenance of storage equipment MHE/8 BS EN ISO 15710:2006 Paints and varnishes. Corrosion testing by alternate immersion in and removal from a buffered sodium chloride solution STI/10 BS EN ISO 15711:2004 Paints and varnishes. Determination of resistance to cathodic disbonding of coatings exposed to sea water STI/10 BS EN ISO :2002 Ships and marine technology. Potable water supply on ships and marine structures. Planning and design SME/32 BS EN ISO :2004 Ships and marine technology. Drainage systems on ships and marine structures. Sanitary drainage-system design SME/32 BS EN ISO :2004 Ships and marine technology. Drainage systems on ships and marine structures. Sanitary drainage, drain piping for gravity system SME/32 BS EN ISO :2004 Ships and marine technology. Drainage systems on ships and marine structures. Sanitary drainage, drain piping for vacuum system SME/32 BS EN 16028:2012 Railway applications. Wheel/rail friction management. Lubricants for trainborne and trackside applications RAE/3/-/6 BS EN 16037:2012 Chemicals used for treatment of water intended for human consumption. Sodium hydrogen sulfate CII/59 BS EN 16038:2012 Chemicals used for treatment of water for swimming pools. Sodium hydrogen sulfate CII/59 BS EN 16054:2012 BMX bicycles. Safety requirements and test methods GME/25 BS EN 16056:2012 Influence of metallic materials on water intended for human consumption. Method to evaluate the passive behaviour of stainless steels EH/6 BS EN 16085:2012 Conservation of cultural property. Methodology for sampling from materials of cultural property. General rules B/560 BS EN 16095:2012 Conservation of cultural property. Condition recording for movable cultural heritage B/560 BS EN 16096:2012 Conservation of cultural property. Condition survey and report of built cultural heritage B/560 BS EN 16161:2012 Water quality. Guidance on the use of in vivo absorption techniques for the estimation of chlorophyll-a concentration in marine and fresh water samples EH/3/5 BS EN :2012 Pyrotechnic articles. Theatrical pyrotechnic articles. Terminology CII/47 BS EN :2012 Pyrotechnic articles. Fireworks, category 4. Terminology CII/47 BS EN 16274:2012 Methods for analysis of allergens. Quantification of suspected fragrance allergens in consumer products. GC analysis of ready-toinject sample CW/217 BS EN 16300:2012 (BS :2012) Automotive fuels. Determination of iodine value in fatty acid methyl esters (FAME). Calculation method from gas chromatographic data PTI/13 BS EN 16345:2012 (BS :2012) Bitumen and bituminous binders. Determination of efflux time of bituminous emulsions using the Redwood No. II Viscometer PTI/13 BS EN ISO 16851:2013 Textile conveyor belts. Determination of the net length of an endless (spliced) conveyor belt PRI/67 BS EN ISO 19117:2014 Geographic information. Portrayal IST/36 BS EN ISO 19152:2012 Geographic information. Land Administration Domain Model (LADM) IST/36 BS EN ISO 19980:2012 Ophthalmic instruments. Corneal topographers CH/172/6 BS EN ISO 20347:2012 Personal protective equipment. Occupational footwear PH/1 BS EN ISO 20566:2013 Paints and varnishes. Determination of the scratch resistance of a coating system using a laboratory-scale car-wash STI/10 BS EN ISO :2004 Ships and marine technology. Drainage systems on ships and marine structures. Sanitary drainage, sewage disposal pipes SME/32 BS EN :2012 Pyrotechnic articles. Theatrical pyrotechnic articles. Categories of theatrical pyrotechnic articles CII/47 BS EN ISO :2012 Paints and varnishes. Determination of stonechip resistance of coatings. Single-impact test with a free-flying impact body STI/10 Update Standards December 2017 Prices may be subject to change. 35

36 British Standards Under Review continued... BS EN ISO 20763:2004 Petroleum and related products. Determination of anti-wear properties of hydraulic fluids. Vane pump method MCE/18/-/16 BS EN ISO :2017 Dosimetry for exposures to cosmic radiation in civilian aircraft. Conceptual basis for measurements NCE/2 BS EN ISO 21487:2012+A2:2015 Small craft. Permanently installed petrol and diesel fuel tanks GME/33 BS EN ISO 23146:2016 Fine ceramics (advanced ceramics, advanced technical ceramics). Test methods for fracture toughness of monolithic ceramics. Single-edge V-notch beam (SEVNB) method RPI/13 BS EN 23270:1991 (ISO 3270:1984) Specification for temperatures and humidities for conditioning and testing paints, varnishes and their raw materials STI/10 BS EN ISO :2012 Energy performance of lifts, escalators and moving walks. Energy measurement and verification MHE/4 BS EN 27213:1993 (ISO 7213:1981) Method for sampling pulps for testing PAI/11 BS EN ISO 27509:2012 Petroleum and natural gas industries. Compact flanged connections with IX seal ring PSE/17/-/6 BS EN ISO :2009 Paints and varnishes. Evaluation of properties of coating systems related to the application process. Relevant vocabulary and preparation of test panels STI/10 BS EN ISO :2009 Paints and varnishes. Evaluation of properties of coating systems related to the application process. Colour stability, process hiding power, re-dissolving, overspray absorption, wetting, surface texture and mottling STI/10 BS EN ISO :2009 Paints and varnishes. Evaluation of properties of coating systems related to the application process. Visual assessment of sagging, formation of bubbles, pinholing and hiding power STI/10 BS EN ISO :2012 Hand-held portable power tools. Test methods for evaluation of vibration emission. Die grinders MCE/8/-/2 BS EN ISO :2016 Building information models. Information delivery manual. Interaction framework B/555 BS ISO 251:2012 Conveyor belts with textile carcass. Widths and lengths PRI/67 BS ISO 513:2012 Classification and application of hard cutting materials for metal removal with defined cutting edges. Designation of the main groups and groups of application MTE/18 BS ISO 704:2009 Terminology work. Principles and methods TS/1 BS ISO 1189:1986 Cinematography. Recorded characteristic for magnetic sound records on 35 mm motionpicture film excluding striped release prints. Specifications CPW/36 BS ISO 2330:2002 Fork-lift trucks. Fork arms. Technical characteristics and testing MHE/7 BS ISO 2424:2007 Textile floor coverings. Vocabulary PRI/3 BS ISO 3053:2004 Oil of grapefruit (Citrus x paradisi Macfad.), obtained by expression AW/54 BS ISO 3069:2000 End-suction centrifugal pumps. Dimensions of cavities for mechanical seals and for soft packing MCE/6 BS ISO 3394:2012 Packaging. Complete, filled transport packages and unit loads. Dimensions of rigid rectangular packages PKW/0 BS ISO :2012 Plain bearings. Thin-walled half bearings with or without flange. Measurement of peripheral length MCE/12 BS ISO 3676:2012 Packaging. Complete, filled transport packages and unit loads. Unit load dimensions PKW/0 BS ISO 3730:2012 Shipbuilding and marine structures. Mooring winches SME/32 BS ISO 3774:1988 Cinematography. 35 mm motion-picture film perforated 8 mm Type S ( ) and (1-0). Cutting and perforating dimensions CPW/36 BS ISO 3809:2004 Oil of lime (cold pressed), Mexican type [Citrus aurantifolia (Christm.) Swingle], obtained by mechanical means AW/54 BS ISO :2012 Compressors, pneumatic tools and machines. Vocabulary. Air treatment MCE/8/-/3 BS ISO 4020:2001 Road vehicles. Fuel filters for diesel engines.test methods MCE/21/6 BS ISO 4195:2012 Conveyor belts with heat-resistant rubber covers. Heat resistance of covers. Requirements and test methods PRI/67 BS ISO 4383:2012 Plain bearings. Multilayer materials for thinwalled plain bearings MCE/12 BS ISO :2012 Plain bearings. Hardness testing of bearing metals. Multilayer bearings materials MCE/12 BS ISO :2012 Plain bearings. Metallic multilayer plain bearings. Non-destructive ultrasonic testing of bond of thickness greater than or equal to 0,5 mm MCE/12 BS ISO :2012 Plain bearings. Metallic multilayer plain bearings. Destructive testing of bond for bearing metal layer thicknesses greater than or equal to 2 mm MCE/12 BS ISO :2012 Methods of test for full-flow lubricating oil filters for internal combustion engines. Vibration fatigue test MCE/21/6 BS ISO 5285:2012 Conveyor belts. Guidelines for storage and handling PRI/67 36 Prices may be subject to change. Update Standards December 2017

37 BS ISO 5294:2012 Synchronous belt drives. Pulleys MCE/10 BS ISO :2012 Tool holders for internal turning with cylindrical shank for indexable inserts. Designation, styles, dimensions and calculation for corrections MTE/18 BS ISO :2012 Tool holders for internal turning with cylindrical shank for indexable inserts. Style F MTE/18 BS ISO :2012 Tool holders for internal turning with cylindrical shank for indexable inserts. Style K MTE/18 BS ISO :2012 Tool holders for internal turning with cylindrical shank for indexable inserts. Style L MTE/18 BS ISO :2012 Tool holders for internal turning with cylindrical shank for indexable inserts. Style U MTE/18 BS ISO :2012 Tool holders for internal turning with cylindrical shank for indexable inserts. Style Q MTE/18 BS ISO 5681:1992 Equipment for crop protection. Vocabulary AGE/15 BS ISO 5950:2012 Electrolytic tin-coated cold-reduced carbon steel sheet of commercial and drawing qualities ISE/109 BS ISO :2012 Hydraulic fluid power. Flange connections with split or one-piece flange clamps and metric or inch screws. Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127 MCE/18/-/4 BS ISO :2012 Paper, board and pulps. Determination of ph of aqueous extracts. Cold extraction PAI/11 BS ISO :2012 Paper, board and pulps. Determination of ph of aqueous extracts. Hot extraction PAI/11 DD ISO/TS 6733:2006 Milk and milk products. Determination of lead content. Graphite furnace atomic absorption spectrometric method AW/5 BS ISO :1987 Textiles. Fibres and yarns. Determination of commercial mass of consignments. Methods for obtaining laboratory samples TCI/24 BS ISO :1987 Textiles. Fibres and yarns. Determination of commercial mass of consignments. Specimen cleaning procedures TCI/24 BS ISO :2008 Plain bearings. Appearance and characterization of damage to metallic hydrodynamic bearings. General MCE/12 BS ISO :2008 Plain bearings. Appearance and characterization of damage to metallic hydrodynamic bearings. Cavitation erosion and its counter measures MCE/12 BS ISO :2012 Plain bearings. Testing of the tribological behaviour of bearing materials. Testing of bearing metals MCE/12 BS ISO :2012 Plain bearings. Testing of the tribological behaviour of bearing materials. Testing of polymer-based bearing materials MCE/12 BS ISO :2009 Diesel engines. End-mounting flanges for pumps. High-pressure supply pumps for common rail fuel injection systems MCE/22 BS ISO 7612:2009 Diesel engines. Base-mounted in-line fuel injection pumps and high-pressure supply pumps for common rail fuel injection systems. Mounting dimensions MCE/22 BS ISO :1998 Hydrodynamic plain journal bearings under steady-state conditions. Circular cylindrical bearings. Functions used in the calculation procedure MCE/12 BS ISO :1998 Hydrodynamic plain journal bearings under steady-state conditions. Circular cylindrical bearings. Permissible operational parameters MCE/12 BS ISO 8310:2012 Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels. General requirements for automatic tank thermometers on board marine carriers and floating storage PTI/12 BS ISO :2007 Metallic tube connections for fluid power and general use. 37 flared connectors MCE/18/-/4 BS ISO/IEC 8652:2012 Information technology. Programming languages. Ada IST/5/-/9 BS ISO 9198:2001 Paper, board and pulp. Determination of watersoluble sulfates PAI/11 BS ISO :2001 Representation of results of particle size analysis. Characterization of a classification process LBI/37 BS ISO 9852:2007 Unplasticized poly(vinyl chloride) (PVC-U) pipes. Dichloromethane resistance at specified temperature (DCMT). Test method PRI/88/4 BS ISO 9980:2012 Belt drives. Grooved pulleys for V-belts (system based on effective width). Geometrical inspection of grooves MCE/10 BS ISO :2012 Hydraulic fluid power. Electrically modulated hydraulic control valves. Test methods for threeport directional flow-control valves MCE/18/-/8 BS ISO :2009 Road vehicles. Air filters for passenger compartments. Test for gaseous filtration MCE/21/2 BS ISO/IEC :2012 Identification cards. Optical memory cards. General characteristics IST/17 BS ISO/IEC :2012 Identification cards. Optical memory cards. Linear recording method. Physical characteristics IST/17 BS ISO/IEC :2012 Identification cards. Optical memory cards. Dimensions and location of the accessible optical area IST/17 BS ISO :2012 Paints and varnishes. Determination of curing characteristics using a free damped oscillation method. Start temperature of the curing reaction STI/10 Update Standards December 2017 Prices may be subject to change. 37

38 British Standards Under Review continued... BS ISO :2012 Paints and varnishes. Determination of curing characteristics using a free damped oscillation method. Glass transition temperature STI/10 BS ISO 12128:2001 Plain bearings. Lubrication holes, grooves and pockets. Dimensions, types, designation and their application to bearing bushes MCE/12 BS ISO :2011 Electrically propelled road vehicles. Test specification for lithium-ion traction battery packs and systems. High-power applications PEL/69 BS ISO 12510:2004 Earth-moving machinery. Operation and maintenance. Maintainability guidelines B/513/1 BS ISO :2004 Graphic technology. Prepress digital data exchange. XYZ/sRGB encoded standard colour image data (XYZ/SCID) PAI/43 BS ISO :2012+A1:2015 Graphic technology. Process control for the production of half-tone colour separations, proofs and production prints. Flexographic printing PAI/43 BS ISO 12742:2007 Copper, lead, and zinc sulfide concentrates. Determination of transportable moisture limits. Flow-table method NFE/36 BS ISO 12991:2012 Liquefied natural gas (LNG). Tanks for on-board storage as a fuel for automotive vehicles PVE/18 BS ISO 13332:2000 Reciprocating internal combustion engines. Test code for the measurement of structure-borne noise emitted from high-speed and mediumspeed reciprocating internal combustion engines measured at the engine feet MCE/14/-/7 BS ISO :2002 Condition monitoring and diagnostics of machines. Vibration condition monitoring. General procedures GME/21/7 BS ISO 13573:2012 Corrosion of metals and alloys. Test method for thermal-cycling exposure testing under hightemperature corrosion conditions for metallic materials ISE/NFE/8 BS ISO 13752:1998 Air quality. Assessment of uncertainty of a measurement method under field conditions using a second method as reference EH/2/4 BS ISO 13953:2001 Polyethelene (PE) pipes and fittings. Determination of the tensile strength and failure mode of test pieces from a butt-fused joint PRI/88 PD CEN ISO/TS 14071:2016 Environmental management. Life cycle assessment. Critical review processes and reviewer competencies: Additional requirements and guidelines to ISO 14044:2006 SES/1 PD ISO/TS 14072:2014 Environmental management. Life cycle assessment. Requirements and guidelines for organizational life cycle assessment SES/1/5 BS ISO/IEC :2012 Information technology. Software measurement. Functional size measurement. Guide for use of ISO/IEC series and related International Standards IST/15 BS ISO 14188:2012 Metallic and other inorganic coatings. Test methods for measuring thermal cycle resistance and thermal shock resistance for thermal barrier coatings STI/40 BS ISO :2012 Road vehicles. Unified diagnostic services (UDS). Unified diagnostic services on CAN implementation (UDSonCAN) AUE/16 BS ISO :2004 Plastics pipes and fittings. Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels. Metric series. Specifications. Fittings for heat-fusion jointing PRI/88/2 BS ISO 14965:2000 Ambient air. Determination of total nonmethane organic compounds. Cryogenic preconcentration and direct flame ionization detection method EH/2/3 BS ISO 15398:2012 Specifications for thermoplastics covers and frames for manholes and inspection chambers used in non-traffic areas PRI/88/1 BS ISO/IEC 15417:2007 Information technology. Automatic identification and data capture techniques. Code 128 bar code symbology specification IST/34 BS ISO 15597:2001 (BS :2004) Methods of test for petroleum and its products. Determination of chlorine and bromine content. Wavelength-dispersive X-ray fluorescence spectrometry PTI/13 BS ISO :2012 Intelligent transport systems. Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV). Framework and architecture EPL/278 BS ISO 15790:2004 Graphic technology and photography. Certified reference materials for reflection and transmission metrology. Documentation and procedures for use, including determination of combined standard uncertainty PAI/43 DD ISO/TS 15827:2007 Road vehicles. Test procedures. Evaluating small female dummy arm and forearm interactions with driver frontal airbags and side airbags AUE/15 BS ISO 15837:2004 Ships and marine technology. Gasketed mechanical couplings for use in piping systems. Performance specification SME/32 BS ISO 15840:2004 Ships and marine technology. Standard specification for thermosetting resin fibreglass pipe and fittings to be used for marine applications SME/32 BS ISO 16160:2012 Hot-rolled steel sheet products. Dimensional and shape tolerances ISE/109 BS ISO 16384:2012 Refrigerated hydrocarbon and nonpetroleum based liquefied gaseous fuels. Dimethylether (DME). Measurement and calculation on board ships PTI/12 BS ISO 16539:2013 Corrosion of metals and alloys. Accelerated cyclic corrosion tests with exposure to synthetic ocean water salt-deposition process. Dry and wet conditions at constant absolute humidity ISE/NFE/8 BS ISO 16548:2012 Ships and marine technology. Ship design. General guidance on emergency towing procedures SME/32 BS ISO 16850:2007+A1:2013 Road vehicles. Pedestrian protection. Child head impact test method AUE/15 38 Prices may be subject to change. Update Standards December 2017

39 BS ISO :2012 Respiratory protective devices. Methods of test and test equipment. Determination of particle filter penetration PH/4 BS ISO 17058:2004 Steel and iron. Determination of arsenic content. Spectrophotometric method ISE/102 PD ISO/TS 17439:2014 Health informatics. Development of terms and definitions for health informatics glossaries IST/35 BS ISO 18225:2012 Plastics piping systems. Multilayer piping systems for outdoor gas installations. Specifications for systems PRI/88/2 BS ISO :2012 Condition monitoring and diagnostics of machines. Requirements for qualification and assessment of personnel. Requirements for training bodies and the training process GME/21/7 BS ISO :2012 Condition monitoring and diagnostics of machines. Requirements for qualification and assessment of personnel. Lubricant laboratory technician/analyst GME/21/7 BS ISO 18573:2012 Conveyor belts. Test atmospheres and conditioning periods PRI/67 BS ISO :2012 Measurement of ride quality. Lifts (elevators) MHE/4 BS ISO :2012 Measurement of ride quality. Escalators and moving walks MHE/4 PD ISO/TS 18806:2014 Solid mineral fuels. Determination of Chlorine content PTI/16 BS ISO :2012 Document management. Electronic document file format for long-term preservation. Use of ISO with support for embedded files (PDF/A-3) IDT/1 BS ISO 19155:2012 Geographic information. Place Identifier (PI) architecture IST/36 BS ISO/IEC :2005+A2:2009 Information technology. Biometric data interchange formats. Face image data IST/44 BS ISO 20858:2007 Ships and marine technology. Maritime port facility security assessments and security plan development SME/32 BS ISO 21601:2013 Corrosion of metals and alloys. Guidelines for assessing the significance of stress corrosion cracks detected in service ISE/NFE/8 BS ISO 23788:2012 Metallic materials. Verification of the alignment of fatigue testing machines ISE/101/6 BS ISO 24535:2007 Intelligent transport systems. Automatic vehicle identification. Basic electronic registration identification (Basic ERI) EPL/278 BS ISO 24611:2012 Language resource management. Morphosyntactic annotation framework (MAF) TS/1 BS ISO/IEC :2012 Information technology. Automatic identification and data capture techniques. Real time locating systems (RTLS) device conformance test methods. Test methods for chirp spread spectrum (CSS) at 2,4 GHz air interface IST/34 BS ISO/IEC 24770:2012 Information technology. Real-time locating system (RTLS) device performance test methods. Test methods for air interface communication at 2,4 GHz IST/34 BS ISO/IEC :2012 Information technology. Radio frequency identification (RFID) for item management. Software system infrastructure. Device interface IST/34 BS ISO/IEC 25021:2012 Systems and software engineering. Systems and software Quality Requirements and Evaluation (SQuaRE). Quality measure elements IST/15 BS ISO/IEC 25041:2012 Systems and software engineering. Systems and software Quality Requirements and Evaluation (SQuaRE). Evaluation guide for developers, acquirers and independent evaluators IST/15 BS ISO 26146:2012 Corrosion of metals and alloys. Method for metallographic examination of samples after exposure to high-temperature corrosive environments ISE/NFE/8 BS ISO 28001:2007 Security management systems for the supply chain. Best practices for implementing supply chain security, assessments and plans. Requirements and guidance SME/32 BS ISO :2013 Security management systems for the supply chain. Electronic port clearance (EPC). Message structures SME/32 PD ISO/TS :2014 Information and documentation. RFID in libraries. Encoding of data elements based on rules from ISO/IEC in an RFID tag with partitioned memory IDT/2/7 BS ISO/IEC :2012 Information technology. Mobile item identification and management. Mobile RFID interrogator device protocol for ISO/IEC Type C IST/34 BS ISO/IEC 29191:2012 Information technology. Security techniques. Requirements for partially anonymous, partially unlinkable authentication IST/33 BS ISO 29903:2012 Guidance for comparison of toxic gas data between different physical fire models and scales FSH/16 BS ISO 39001:2012 Road traffic safety (RTS) management systems. Requirements with guidance for use RTS/1 BS ISO/IEC 40500:2012 Information technology. W3C Web Content Accessibility Guidelines (WCAG) 2.0 ICT/-/1 DD ISO/TS :2011 Nanotechnologies. Vocabulary. Diagnostics and therapeutics for healthcare NTI/1 DD ISO/TS :2011+A1:2013 Medical devices. Hierarchical coding structure for adverse events. Event-type codes CH/210/3 DD ISO/TS 23556:2007 Performance test method for diesel engine soot-removal devices in lubricating oils. Initial filtration efficiency MCE/21/6 Update Standards December 2017 Prices may be subject to change. 39

40 British Standards Under Review continued... DD ISO/TS 26844:2006 Milk and milk products. Determination of antimicrobial residues. Tube diffusion test AW/5 PD ISO/TS 16785:2014 Electronic Fee Collection (EFC). Interface definition between DSRC-OBE and external invehicle devices EPL/278 PD ISO/TS 17182:2014 Soil quality. Determination of some selected phenols and chlorophenols. Gas chromatographic method with mass spectrometric detection EH/4 PD ISO/TS :2014 Road vehicles. Aerosol separator performance test for internal combustion engines. Method to perform engine gravimetric test MCE/22 PD ISO/IEC GUIDE 37:2012 Instructions for use of products by consumers W/- PD ISO GUIDE 78:2012 Safety of machinery. Rules for drafting and presentation of safety standards MCE/3 BS MA 87-1:1980 (ISO 4175:1979) Series 1 shipborne barges. Specification for main dimensions SME/32 BS MA 87-2:1985 (ISO 7221:1984) Series 1 shipborne barges. Specification for principal technical requirements SME/32 BS MA 87-3:1987 (ISO 6764:1985) Series 1 shipborne barges. Specification for the arrangement, dimensions and method of test for lifting post castings SME/32 BS MA 98-1:1985 (ISO 7607:1984) Multi-bucket dredgers. Specification for scale of bucket capacities SME/32 BS MA 99-1:1985 (ISO 6766:1984) Series 4 shipborne barges. Specification for main dimensions SME/32 BS MA 104-1:1987 (ISO 7222:1985) Series 2 shipborne barges. Specification for main dimensions SME/32 BS MA 105-1:1987 (ISO 6765:1985) Series 3 shipborne barges. Specification for main dimensions SME/32 BS MA 105-2:1987 (ISO 8303:1985) Series 3 shipborne barges. Specification for main operational and technical requirements SME/32 BS MA 105-3:1987 (ISO 8304:1984) Series 3 shipborne barges. Specification for principal mating dimensions for the ventilating system SME/32 BS AU 203a:1988 (ISO 7653:1985) Specification for dimensions of couplings between power take offs (PTOs) and ancillary driven units on commercial road vehicles AUE/13 BS AU 222:1988 (ISO 7629:1987) Method of evaluating surface and material flaws of disc brake pads after testing AUE/15 NEW WORK STARTED The reference number of the committee responsible for each item of new work started is given after each entry. Where a work item has the temporary designation EN XXXX, it has not yet been allocated a standard number by the European standards body. All national standards (BS XXXX), apart from corrigenda, will be issued for public comment in due course. All drafts for public comment are available at where you can register and comment free of charge. BS Code of practice for the design and installation of natural stone cladding and lining. Traditional handset external cladding will supersede BS :2010 B/545 BS Code of practice for the design and installation of natural stone cladding and lining. Stonefaced pre-cast concrete cladding systems will supersede BS :2010 B/545 BS Code of practice for the design and installation of natural stone cladding and lining. Rainscreen and stone on metal frame cladding systems will supersede BS :2010 B/545 BS Code of practice for the design and installation of natural stone cladding and lining. Natural stone lining will supersede BS :2010 B/545 BS 4A 169:2002/A1 Specification for aluminium alloy bolts (unified hexagons and unified threads) for aircraft ACE/12 BS A 226:1965/A1 Specification for steel hexagon head bolts (short thread. Class 3A) ACE/12 BS 4A 228:1997/A1 Specification for steel double hexagon bolts Mpa (180, 000 lbf/in2) for aircraft ACE/12 EN 71-3 Safety of toys. Migration of certain elements will supersede BS EN 71-3:2013+A1:2014 CW/15 EN Safety rules for the construction and installation of lifts. Lifts for the transport of persons and goods. Passenger and goods passenger lifts will supersede BS EN 81-20:2014 MHE/4 EN Safety rules for the construction and installation of lifts. Examinations and tests. Design rules, calculations, examinations and tests of lift components will supersede BS EN 81-50:2014 MHE/4 EN Safety rules for the construction and installation of lifts. Particular applications for passenger and goods passenger lifts. Firefighters lifts will supersede BS EN 81-72:2015 MHE/4 EN Safety rules for the construction and installation of lifts. Particular applications for passenger and goods passenger lifts. Behaviour of lifts in the event of fire will supersede BS EN 81-73:2016 MHE/4 EN WI Temporary works equipment. Execution. Requirements for manufacturing B/514 EN WI Industrial trucks. Specifications and test methods. Operator restraint systems other than lap-type seat belts MHE/7 40 Prices may be subject to change. Update Standards December 2017

41 EN WI Protective clothing. Visibility clothing for nonprofessional use. Test methods and requirements will supersede BS EN 1150:1999 PH/3/7 EN WI Fixed firefighting systems. Water mist systems. Test protocol for office, school class rooms and hotel for automatic nozzle systems ( ) FSH/18/5 EN WI Fixed firefighting systems. Water mist systems. Test protocol for machinery in enclosures not exceeding 260 m3 for open nozzle systems FSH/18/5 EN WI Fixed firefighting systems. Water mist systems. Test protocol for machinery in enclosures exceeding 260 m3 for open nozzle systems FSH/18/5 EN WI Fixed firefighting systems. Components for sprinkler and water spray systems. Sprinklers for residential applications FSH/18/2 EN WI Stationary source emissions. Data acquisition and handling systems. Specification of requirements for the handling and reporting of data EH/2/4 CEN/TS WI Condition assessment methodologies DS/1 EN WI Construction products. Assessment of release of dangerous substances. Determination of emissions of ammonia from cellulose insulation products at 90% RH B/557 EN 384:2016/A1 Structural timber. Determination of characteristic values of mechanical properties and density B/518 EN 448 District heating pipes. Preinsulated bonded pipe systems for directly buried hot water networks. Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene will supersede BS EN 448:2015 RHE/9 EN 488 District heating pipes. Preinsulated bonded pipe systems for directly buried hot water networks. Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene will supersede BS EN 488:2015 RHE/9 EN ISO General methods of test for pigments and extenders. Determination of ph value of an aqueous suspension will supersede BS EN ISO 787-9:1995 STI/1 EN ISO General methods of test for pigments and extenders. Determination of resistivity of aqueous extract will supersede BS EN ISO :2002 STI/1 EN Tests for mechanical and physical properties of aggregates. Methods for the determination of resistance to fragmentation will supersede BS EN :2010 B/502/6 EN Tests for mechanical and physical properties of aggregates. Determination of the polished stone value will supersede BS EN :2009 B/502/6 EN 1473 Installation and equipment for liquefied natural gas. Design of onshore installations will supersede BS EN 1473:2016 GSE/38 EN ISO Textiles. Quantitative chemical analysis. General principles of testing will supersede BS EN ISO :2010 TCI/100 EN ISO Textiles. Quantitative chemical analysis. Ternary fibre mixtures will supersede BS EN ISO :2010 TCI/100 EN ISO Textiles. Quantitative chemical analysis. Mixtures of acetate and triacetate fibres (method using benzyl alcohol) will supersede BS EN ISO :2010 TCI/100 EN ISO Textiles. Quantitative chemical analysis. Mixtures of certain chlorofibres and certain other fibres (method using carbon disulfide/acetone) will supersede BS EN ISO :2010 TCI/100 EN ISO Textiles. Quantitative chemical analysis. Mixtures of acetate and certain chlorofibres (method using acetic acid) will supersede BS EN ISO :2010 TCI/100 EN ISO Textiles. Quantitative chemical analysis. Mixtures of jute and certain animal fibres (method by determining nitrogen content) will supersede BS EN ISO :2010 TCI/100 EN ISO Textiles. Quantitative chemical analysis. Mixtures of chlorofibres (homopolymers of vinyl chloride) and certain other fibres (method using sulfuric acid) will supersede BS EN ISO :2010 TCI/100 EN ISO 4074:2015/A1 Natural rubber latex male condoms. Requirements and test methods CH/157 EN ISO 4489 Sintered hardmetals. Sampling and testing will supersede BS EN 24489:1993 ISE/65 EN ISO Hardmetals. Metallographic determination of microstructure. Photomicrographs and description will supersede BS EN ISO :2010 ISE/65 EN ISO Hardmetals. Metallographic determination of microstructure. Measurement of WC grain size will supersede BS EN ISO :2010 ISE/65 EN ISO 4884 Hardmetals. Sampling and testing of powders using sintered test pieces will supersede BS EN 24884:1993 ISE/65 EN 7010 Aerospace series. User guide for creation and designation of bolts ACE/1 EN ISO 7199:2016/A1 Cardiovascular implants and artificial organs. Blood-gas exchangers (oxygenators) CH/150/2 EN 10139:2016/A1 Cold rolled uncoated low carbon steel narrow strip for cold forming. Technical delivery conditions ISE/109 EN Corrosion resistant steel castings will supersede BS EN 10283:2010 ISE/111 Update Standards December 2017 Prices may be subject to change. 41

42 New Work Started continued... EN ISO Jewellery. Determination of platinum in platinum jewellery alloys. ICP-OES method using yttrium as internal standard element will supersede BS EN ISO 11494:2016 STI/53 EN ISO Jewellery. Determination of palladium in palladium jewellery alloys. ICP-OES method using yttrium as internal standard element will supersede BS EN ISO 11495:2016 STI/53 EN Electromagnetic compatibility. Product family standard for lifts, escalators and moving walks. Immunity will supersede BS EN 12016:2013 MHE/4 EN Operating forces. Test method. Windows will supersede BS EN :2003 B/538/1 EN Swap bodies. Tarpaulins. Minimum requirements will supersede BS EN :2005 TW/1 EN Swap bodies. Tarpaulins. Minimum requirements for combined transport will supersede BS EN :2006 TW/1 EN Bituminous mixtures. Test methods. Cohesion increase by spreadability-meter method B/510/1 EN Bituminous mixtures. Test methods. Curing of specimen for test of mixtures with bitumen emulsion B/510/1 EN Bituminous mixtures. Test methods. Organoleptic assessment of compatibility of constituent materials of a mixture with bitumen emulsion B/510/1 EN Bituminous mixtures. Test methods. Specimen preparation by static compaction B/510/1 EN Shell boilers. Inspection during construction, documentation and marking of pressure parts of the boiler will supersede BS EN :2002 PVE/2 EN Petrol filling stations. Construction and performance of automatic nozzles for use on fuel dispensers will supersede BS EN 13012:2012 PVE/393 EN Bituminous mixtures. Material specifications. Asphalt concrete with bituminous emulsion B/510/1 EN Windows. Classification of mechanical properties. Racking, torsion and operating forces will supersede BS EN 13115:2001 B/538/1 CEN/TR Child care articles. General safety guidelines. Chemical hazards will supersede PD CEN/TR :2015 CW/1 CEN/TR Child care articles. General safety guidelines. Mechanical hazards will supersede PD CEN/TR :2015 CW/1 CEN/TR Child care articles. General safety guidelines. Product information will supersede PD CEN/TR :2015 CW/1 EN Unfired pressure vessels. Additional requirements for pressure vessels of titanium and titanium alloys PVE/1 EN Petrol filling stations. Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units will supersede BS EN :2012 PVE/393 EN Petrol filling stations. Safety requirements for construction and performance of safe breaks for use on metering pumps and dispensers will supersede BS EN :2012 PVE/393 EN Petrol filling stations. Safety requirements for construction and performance of shear valves will supersede BS EN :2012 PVE/393 EN Petrol filling stations. Safety requirements for construction and performance of swivels for use on metering pumps and dispensers will supersede BS EN :2012 PVE/393 EN 13830:2015/A1 Curtain walling. Product standard B/538/1 EN 14214:2012/A2 Liquid petroleum products. Fatty acid methyl esters (FAME) for use in diesel engines and heating applications. Requirements and test methods PTI/2 EN District heating pipes. Preinsulated bonded pipe systems for directly buried hot water networks. Surveillance systems will supersede BS EN 14419:2009 RHE/9 EN Water quality. Guidance standard for assessing the hydromorphological features of rivers will supersede BS EN 14614:2004 EH/3 EN District heating pipes. Preinsulated bonded twin pipe systems for directly buried hot water networks. Twin pipe assembly of steel service pipe, polyurethane thermal insulation and outer casing of polyethylene will supersede BS EN :2009 RHE/9 EN District heating pipes. Preinsulated bonded twin pipe systems for directly buried hot water networks. Fitting and valve assembly of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene will supersede BS EN :2015 RHE/9 EN Waste. Analysis of eluates will supersede BS EN 16192:2011 EH/4 EN Thermal insulation products for buildings. Factory made composite products. Specification B/540 CEN/TS Construction products. Assessment of release of dangerous substances. Guidance for the determination of leaching tests and additional testing steps will supersede PD CEN/TS :2014 B/557 CEN/TS Waste. Test methods for the determination of the monolithic status of waste to be landfilled will supersede PD CEN/TS 16675:2014 EH/4 EN Energy efficiency of industrial trucks. Test methods. Container straddle carriers CB/- 42 Prices may be subject to change. Update Standards December 2017

43 EN Determination of compressive shear strength of wood adhesives at elevated temperatures PRI/52 CEN/TR Fuels and biofuels. Assessment on oxidation stability determination methods for distillate fuels and blends thereof with fatty acid methyl esters (FAME) PTI/2 EN Information technology. RFID in rail IST/34 EN Water play equipment and features. Safety requirements, test methods and operational requirements SW/136 EN Water quality. Guidance for assessing the efficiency and related metrics of fish passage solutions using telemetry EH/3 EN ISO Functional pigments and extenders for special applications. Nanoscale calcium carbonate for sealant application will supersede BS ISO :2015 STI/1 EN ISO High-efficiency filters and filter media for removing particles in air. Aerosol production, measuring equipment and particle-counting statistics will supersede BS EN :2009 MCE/21/3 EN ISO High-efficiency filters and filter media for removing particles in air. Testing flat sheet filter media will supersede BS EN :2009 MCE/21/3 EN ISO High-efficiency filters and filter media for removing particles in air. Test method for determining leakage of filter elements. Scan method will supersede BS EN :2009 MCE/21/3 EN ISO High-efficiency filters and filter media for removing particles in air. Test method for filter elements will supersede BS EN :2009 MCE/21/3 CLC/TS Railway applications. Compatibility between rolling stock and train detection systems. Compatibility with axle counters will supersede PD CLC/TS :2013 GEL/9 EN :2015/A1 Lead-acid starter batteries. General requirements and methods of test PEL/21 EN :2013/A2 Power line communication apparatus used in low-voltage installations. Radio disturbance characteristics. Limits and methods of measurement. Apparatus for in-home use GEL/210 EN :2013/A3 Power line communication apparatus used in low-voltage installations. Radio disturbance characteristics. Limits and methods of measurement. Apparatus for in-home use GEL/210 CLC/TR Collection, logistics and treatment requirements for WEEE. Report on the alignment between Directive 2012/19/EU and EN series standards and EN GEL/111 CLC/TR Cyber security and privacy L/13 EN :2015/A1 Explosive atmospheres. Equipment protection by liquid immersion o EXL/31 EN :2006/A2 Household and similar electrical appliances. Safety. Particular requirements for commercial microwave ovens CPL/61/7 EN Photovoltaic devices. Procedures for temperature and irradiance corrections to measured I-V characteristics will supersede BS EN 60891:2010 GEL/82 EN Industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Methods of test will supersede BS EN :2004 GEL/15 EN Low-voltage switchgear and controlgear. Multiple function equipment. Control and protective switching devices (or equipment) (CPS) will supersede BS EN :2003 PEL/121/1 EN Electromagnetic compatibility (EMC). Environment. Description of HEMP environment. Conducted disturbance will supersede BS EN :1999 GEL/210 EN Connectors for electronic equipment. Product requirements. Detail specification for 2-way, shielded and unshielded, free and fixed connectors for data transmission up to 600 MHz with current carrying capacity will supersede PD IEC/PAS :2015 EPL/48 EN Connectors for electronic equipment. Product requirements. Power connectors. Detail specification for 2P or 3P power plus 2P signal shielded and sealed connectors with plastic housing for rated current of 40 A EPL/48 EN Connectors for electronic equipment. Product requirements. Power connectors. Detail specification for 2P or 3P power plus 2P signal shielded and sealed connectors with plastic housing for rated current of 40 A EPL/48 EN Connectors for electronic equipment. Product requirements. Power connectors. Detail specification for 2P or 3P power plus 2P signal shielded and sealed connectors with plastic housing for rated current of 150 A EPL/48 EN Maritime navigation and radiocommunication equipment and systems. Global navigation satellite systems (GNSS). Test results EPL/80 EN 61167:2016/A1 Metal halide lamps. Performance specification CPL/34/1 EN Live working. Voltage detectors. Capacitive type to be used for voltages exceeding 1 kv a.c. will supersede BS EN :2005+A1:2010 PEL/78 EN Live working. Conformity assessment applicable to tools, devices and equipment will supersede BS EN 61318:2008 PEL/78 EN Electrical installations for aeronautical ground lighting at aerodromes. Requirements for nonseries circuits EPL/97 EN Safety requirements for secondary batteries and battery installations. General safety information will supersede BS EN :2010 PEL/21 EN Safety requirements for secondary batteries and battery installations. Stationary batteries will supersede BS EN :2001 PEL/21 Update Standards December 2017 Prices may be subject to change. 43

44 New Work Started continued... EN Safety requirements for secondary batteries and battery installations. Valve-regulated lead-acid batteries for use in portable appliances will supersede BS EN :2007 PEL/21 EN OPC Unified Architecture. PubSub AMT/7 EN Maritime navigation and radiocommunication equipment and systems. Cyber security. General requirements, methods of testing and required test results EPL/80 EN ISO Medical electrical equipment. Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement will supersede BS EN ISO :2012 CH/121 IEC International electrotechnical vocabulary. Industrial electroheat PEL/27 IEC Specifications for particular types of winding wires. Solderable polyurethane enamelled round copper wire, class 130, with a bonding layer will supersede BS EN :2012 L/-/99 IEC Household and similar electrical appliances. Safety. General requirements will supersede BS EN :2012+A11:2014 CPL/61 IEC Household and similar electrical appliances. Safety. Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances will supersede BS EN :2015 CPL/61/7 IEC Household and similar electrical appliances. Safety. Particular requirements for appliances for skin exposure to optical radiation will supersede BS EN :2013 CPL/61/1 To order visit IEC Household and similar electrical appliances. Safety. Particular requirements for flexible sheet heating elements for room heating will supersede BS EN :2002+A2:2009 CPL/61/7 IEC Magnetic materials. Specifications for individual materials. Specification for steel strip and sheet with specified mechanical properties and magnetic permeability ISE/108 IEC Magnetic materials. Method of test for the determination of surface insulation resistance of magnetic strip and sheet will supersede BS EN :2013 ISE/108 IEC Safety in installations for electroheating and electromagnetic processing. General requirements will supersede BS EN :2015 PEL/27 IEC Luminaires. Particular requirements. Luminaires for emergency lighting CPL/34/4 IEC Specification for high-voltage fuse-links for motor circuit applications will supersede BS EN 60644:2009 PEL/32 IEC Nuclear power plants. Instrumentation systems important to safety. Containment monitoring for early detection of developing deviations from normal operation in light water reactors NCE/8 IEC/TR EMC. Phase angles of harmonic current emissions and voltages in the public supply networks, and future expectation GEL/210 IEC :2015/A1 Electromagnetic compatibility (EMC). Testing and measurement techniques. Test methods for protective devices for HEMP conducted disturbance GEL/210 IEC Reliability testing. Compliance test plans for success ratio will supersede BS :1993 DS/1 IEC Radio Frequency Connectors. Specification for coaxial connectors with 0.8 mm inner diameter of outer conductor, nominal characteristic impedance 50 ohms EPL/46 IEC Marking on ferrite cores will supersede BS EN 61333:1998 EPL/51 IEC Lamp controlgear. Particular requirements for battery supplied electronic controlgear for emergency lighting (self-contained) will supersede BS EN :2011+A1:2017 CPL/34/3 IEC Electrical installations for aeronautical ground lighting at aerodromes. Requirements for series circuits EPL/97 IEC Electrical systems for electric road vehicles and electric industrial trucks. Common items of TC 69 publications PEL/69 IEC Low-voltage switchgear and controlgear. Controller-device interfaces (CDIs). General rules will supersede BS EN :2007 PEL/121/1 IEC :2013/A1 Low-voltage switchgear and controlgear. Controller-device interfaces (CDIs). Actuator sensor interface (AS-i) PEL/121/1 IEC/TS Fuel cell technologies. Evaluation methodology for the environmental performance of fuel cell power systems based on life cycle thinking. Product category rules for environmental product declarations of stationary fuel cell power systems and alternative GEL/105 IEC Power systems management and associated information exchange. Data and communications security. Role-based access control PEL/57 IEC Digital addressable lighting interface. Particular requirements for control gear. Firmware transfer CPL/34/3 IEC /A1 Household refrigerating appliances. Characteristics and test methods. General requirements CPL/59 IEC /A1 Household refrigerating appliances. Characteristics and test methods. Energy consumption and volume CPL/59 44 Prices may be subject to change. Update Standards December 2017

45 IEC/TS Nanomanufacturing. Key control characteristics. Luminescent nanomaterials. Determination of fluorescence lifetime using time correlated single photon counting (TCSPC) NTI/1 IEC Field device integration (FDI). Profiles. Generic protocols AMT/7 IEC Field device integration (FDI). Profiles. Modbus- RT AMT/7 IEC Field device integration (FDI). Profiles. ISA100.11a AMT/7 IEC/TS Measurement of internal electric field in insulating materials. Pressure wave propagation method GEL/112 IEC Printed electronics. Materials. Conductive ink. Measurement of peel strength for printed conductive layer on flexible substrate AMT/9 IEC Printed electronics. Mechanical and environmental combined stress test methods for flexible OLED elements AMT/9 IEC Terrestrial photovoltaic (PV) modules. Guideline for increased confidence in PV module design qualification and type approval GEL/82 IEC Profiles for energy consumption data ( My Energy Data ) PEL/57 IEC Terrestrial photovoltaic (PV) modules for consumer products. Design qualification and type approval GEL/82 IEC/TS Reliability of industrial automation devices and systems. Assurance of automation devices reliability data and specification of their source GEL/65 IEC/TS Performance expression of industrial water quality analyzers. Photometry GEL/65 IEC Electrical household and similar cooling and freezing appliances, food preservation and storage CPL/59 ISO 473 Lithopone pigments for paints. Specifications and methods of test STI/1 ISO 788 Ultramarine pigments for paints STI/1 ISO 1018 Hard coal. Determination of moisture-holding capacity PTI/16 ISO 2370 Textiles. Determination of fineness of flax fibres. Permeametric methods TCI/24 ISO 3129 Wood. Sampling methods and general requirements for physical and mechanical testing of small clear wood specimens will supersede BS ISO 3129:2012 B/543 ISO 3911 Wheels and rims for pneumatic tyres. Vocabulary, designation and marking will supersede BS ISO 3911:2004 AUE/-/1 ISO :2013/A1 Agricultural machinery. Safety. General requirements AGE/32 ISO 4399 Fluid power systems and components. Connectors and associated components. Nominal pressures will supersede BS 7847:1996 MCE/18/-/4 ISO/TR Hardmetals. Metallographic determination of microstructure. Characterisation and measurement of miscellaneous microstructural features ISE/65 ISO 5323 Solid wood parquet and raw parquet blocks. Vocabulary B/543 ISO/TS Calculation of load capacity of spur and helical gears. Calculation of scuffing load capacity (also applicable to bevel and hypoid gears). Flash temperature method MCE/5/-/6 ISO 7438 Metallic materials. Bend test will supersede BS EN ISO 7438:2016 ISE/101/2 ISO Road vehicles. Electrical disturbances from conduction and coupling. Electrical transient conduction along supply lines only will supersede BS ISO :2011 AUE/-/1 ISO Rubber and plastics hoses and hose assemblies for automotive air conditioning. Specification. Refrigerant 1234yf PRI/66 ISO Electrical requirements for lifts, escalators and moving walks. Electromagnetic compatibility with regard to immunity MHE/4 ISO Particle size analysis by laser diffraction will supersede BS EN ISO :2010 STI/10 ISO Coating powders. Terminology will supersede BS EN ISO :2004 STI/10 ISO 8794 Steel wire ropes. Spliced eye terminations for slings MHE/2 ISO 8965 Logging industry. Technology. Vocabulary B/543 ISO 9090 Gas tightness of equipment for gas welding and allied processes will supersede BS EN 29090:1992 WEE/18 ISO 9628 Rolling bearings. Insert bearings and eccentric locking collars. Boundary dimensions and tolerances will supersede BS ISO 9628:2006+A1:2011 MCE/7 ISO/TR 9769 Steel and iron. Review of available methods of analysis ISE/102 ISO Textile machinery. Noise test code. Fabric manufacturing machinery will supersede BS EN ISO :2001+A2:2014 TCI/33 Update Standards December 2017 Prices may be subject to change. 45

46 New Work Started continued... ISO Metallic powders. Determination of envelopespecific surface area from measurements of the permeability to air of a powder bed under steady-state flow conditions ISE/65 ISO Small craft. Owner s manual will supersede BS EN ISO 10240:2004+A1:2015 GME/33 ISO/IEC Identification cards. Test methods. Vicinity cards will supersede BS ISO/IEC :2008 IST/17 ISO :2012/A1 Rough-terrain trucks. Safety requirements and verification. Variable-reach trucks MHE/7 ISO Tractors and machinery for agriculture and forestry. Serial control and communications data network. Network management will supersede BS ISO :2011 AGE/6/1 ISO Plastics. Smoke generation. Determination of the corrosivity of fire effluents. General requirements and applicability will supersede BS ISO :1998 PRI/26 ISO Ophthalmic implants. Intraocular lenses. Biocompatibility will supersede BS EN ISO :2006 CH/172/7 ISO Graphic technology. Process control for the manufacture of half-tone colour separations, proofs and production prints. Metal decoration printing processes PAI/43 ISO Ophthalmic optics. Spectacle frames. Requirements and test methods will supersede BS EN ISO 12870:2014 CH/172 ISO Rolling bearings. Accessories for sleeve type linear ball bearings. Boundary dimensions and tolerances for series 1 and 3 will supersede BS ISO :2009 MCE/7 ISO Rolling bearings. Accessories for sleeve type linear ball bearings. Boundary dimensions and tolerances for series 5 will supersede BS ISO :2009 MCE/7 ISO Physical and mechanical properties of wood. Test methods for small clear wood specimens. Determination of strength in compression perpendicular to grain B/543 ISO Road vehicles. Diagnostic communication over internet protocol (DoIP). Transport protocol and network layer services will supersede BS ISO :2012 AUE/-/1 ISO Environmental management. Material flow cost accounting. guidance for practical application in the SME sector SES/1 ISO Greenhouse gases. Requirements for greenhouse gas validation and verification bodies for use in accreditation or other forms of recognition will supersede BS EN ISO 14065:2013 SES/1/7 ISO Jewellery. Determination of precious metals in 999 0/00 gold, platinum and palladium jewellery alloys. Difference method using ICP- OES will supersede BS ISO 15093:2015 STI/53 ISO Jewellery. Determination of silver in 999 0/00 silver jewellery alloys. Difference method using ICP-OES will supersede BS ISO 15096:2014 STI/53 ISO Hot-rolled twin-roll cast carbon steel sheet of commercial quality will supersede BS ISO 15177:2012 ISE/109 ISO Hot-rolled twin-roll cast steel sheet of structural quality and high strength steel will supersede BS ISO 15179:2012 ISE/109 ISO Continuous hot-dip zinc-coated twin-roll cast steel sheet of commercial quality will supersede BS ISO 15208:2012 ISE/109 ISO Continuous hot-dip zinc-coated twin-roll cast steel sheet of structural quality and high strength steel will supersede BS ISO 15211:2012 ISE/109 ISO Petroleum and natural gas industries. Bends, fittings and flanges for pipeline transportation systems. Factory cold bends PSE/17 ISO 15674:2016/A1 Cardiovascular implants and artificial organs. Hard-shell cardiotomy/venous reservoir systems (with/without filter) and soft venous reservoir bags CH/150/2 ISO 15675:2016/A1 Cardiovascular implants and artificial organs. Cardiopulmonary bypass systems. Arterial blood line filters CH/150/2 ISO Automation systems and integration. Integration of advanced process control and optimization capabilities for manufacturing systems. Validation and verification AMT/5 ISO Soil quality. Characterization of soil with respect to human exposure EH/4 ISO/TS Road vehicles. Design and performance specifications for the WorldSID 50th percentile male side-impact dummy. Dummy design updates will supersede PD ISO/TS :2017 AUE/-/1 ISO 16135:2006/A1 Industrial valves. Ball valves of thermoplastics materials PRI/88/2 ISO 16136:2006/A1 Industrial valves. Butterfly valves of thermoplastics materials PRI/88/2 ISO 16137:2006/A1 Industrial valves. Check valves of thermoplastics materials PRI/88/2 ISO 16138:2006/A1 Industrial valves. Diaphragm valves of thermoplastics materials PRI/88/2 ISO 16139:2006/A1 Industrial valves. Gate valves of thermoplastics materials PRI/88/2 ISO Information and documentation. Principles and functional requirements for records in electronic office environments. Overview and statement of principles IDT/2/17 46 Prices may be subject to change. Update Standards December 2017

47 ISO Information and documentation. Principles and functional requirements for records in electronic office environments. Guidelines and functional requirements for digital records management systems IDT/2/17 ISO Automation systems and integration. Equipment behaviour catalogues for virtual production system. Overview AMT/5 ISO Road vehicles. Wheels. Measurement of radial and lateral run-out will supersede BS ISO 16833:2006 AUE/-/1 ISO Intelligent transport systems. Identifiers. Management and operation of registries EPL/278 ISO Footwear. Test methods for uppers, linings and in socks. Colour fastness to rubbing will supersede BS EN ISO 17700:2005 TCI/69 ISO Quantitative determination of antibacterial activity of ceramic surfaces. Test methods. Ceramic surfaces with incorporated antibacterial agents B/539 ISO Quantitative determination of antibacterial activity of ceramic surfaces. Test methods. Ceramic surfaces with incorporated photocatalytic antibacterial agents B/539 ISO Founding. Ausferritic spheroidal graphite cast irons. Classification will supersede BS ISO 17804:2005 ISE/111 ISO Ceramic tiling systems. Sustainability for ceramic tiles and installation materials. Specification for ceramic tiles B/539 ISO/IEC Information technology. Personal identification. ISO-compliant driving licence. Test methods will supersede BS ISO/IEC :2011 IST/-/99 ISO 18241:2016/A1 Cardiovascular implants and extracorporeal systems. Cardiopulmonary bypass systems. Venous bubble traps CH/150/2 ISO/TR Surface chemical analysis. X-ray photoelectron spectroscopy. Procedures for determining backgrounds CII/60 ISO Condition monitoring and diagnostics of machines. Thermography. Image interpretation and diagnostics GME/21 ISO Pigments, dyestuffs and extenders. Terminology. General terms will supersede BS ISO :2015 STI/1 ISO Robotics. Performance criteria and related test methods for service robots. Manipulation AMT/10 ISO Woodworking machines. Safety. Four sided planning and moulding machines MTE/23 ISO 19434:2017/A1 Mining. Classification of mine accidents MRE/1 ISO/TS Guidelines for assessing the adverse impact of wild land fires on the environment and to people through environmental exposure FSH/16 ISO/IEC Information technology. Document schema definition languages (DSDL). Character repertoire description language (CREPDL) will supersede BS ISO/IEC :2009 IST/-/99 ISO/IEC Information technology. Service management. Concepts and terminology will supersede PD ISO/IEC TR :2015 IST/60/2 ISO Standard-target method of calibrating active sonars for imaging and measuring scattering EH/1/7 ISO Surface chemical analysis. Auger electron spectroscopy and X-ray photoelectron spectroscopy. Methods used to determine peak intensities and information required when reporting results will supersede BS ISO 20903:2011 CII/60 ISO Digital cameras. Measurement and description method for image stabilization performance. Optical systems CPW/42 ISO Cryogenic vessels. Cryogenic insulation performance will supersede BS ISO 21014:2006 PVE/18 ISO Restrained joint system for ductile iron pipe. Length calculations of restrained pipes and fittings ISE/110 ISO Life cycle analysis and recycling of ductile iron pipes for water applications ISE/110 ISO/TS Water quality. Characterization of analytical methods. Guidance for the selection of a representative matrix for a scope EH/3 ISO Rolling bearings. Noise testing of rolling bearing greases. Test and evaluation method NQ MCE/7 ISO Water quality. Multi-class methods. Guidance for the identification of target compounds by gas and liquid chromatography and mass spectrometry EH/3 ISO Water quality. Multi-class methods. Guidance for the evaluation of a multi-group organic substances analytical method EH/3 ISO Soil quality. Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil materials. Influence of ph on leaching with initial acid/base addition EH/4 ISO Traditional Chinese medicine. Guidelines for Chinese materia medica specification CH/100/1 ISO Synchronous belt drives. Automotive belts MCE/10 ISO/TS Nanotechnologies. Characterization of cellulose elementary fibril samples NTI/1 ISO Global reference atmosphere for altitude km for aerospace use ACE/68 Update Standards December 2017 Prices may be subject to change. 47

48 New Work Started continued... ISO Model of atmosphere in the boundary layer at altitudes from 0 to 3000 m for aerospace practices ACE/68 ISO Global reference atmosphere for altitude km for aerospace use ACE/68 ISO Solid biofuels. Determination of grindability. Hardgrove type method for thermally treated biomass fuels PTI/17 ISO Solid recovered fuels. Determination of calorific value will supersede BS EN 15400:2011 PTI/17 ISO Solid recovered fuels. Determination of ash content will supersede BS EN 15400:2011 PTI/17 ISO Solid recovered fuels. Determination of moisture content using the oven dry method. Moisture in general analysis sample will supersede BS EN :2011 PTI/17 ISO 21787:2006/A1 Industrial valves. Globe valves of thermoplastics materials PRI/88/2 ISO External corrosion protection system for ductile iron pipes and fittings ISE/110 ISO Plain bearings. Automotive engine bearing test rig using actual connecting rods. Test rig MCE/12 ISO/TR Information and documentation. Appraisal for managing records IDT/2 ISO/TR Information and documentation. Records management in enterprise architecture IDT/2/17 ISO Geometrical product specifications (GPS). Geometrical tolerancing. Global and general GPS specifications will supersede BS EN :1993 TDW/4 ISO Water quality. Technetium-99. Test method using liquid scintillation counting EH/3 ISO Solid recovered fuels. Determination of content of volatile matter will supersede BS EN 15402:2011 PTI/17 ISO/TR Information and documentation. Records management in the cloud. Issues and concerns IDT/2 ISO Water quality. Iron-55 and nickel-63. Test method using liquid scintillation counting EH/3 ISO/IEC Standard for electronic labeling IST/-/99 ISO Cardiovascular implants. Cardiac occluders CH/150/2 ISO/TR Biotechnology. Biobanking. Implementation guide for ISO BTI/1 ISO Test method for measuring stress corrosion crack growth rate of austenitic steels and alloys under constant-load condition in hightemperature water ISE/NFE/8 ISO Fertilizers and soil conditioners. Compound fertilizer. General requirements CII/37 ISO Graphic technology. Decorative prints. Preparation of laminate samples for appearance assessment PAI/43 ISO Laboratory equipment. Interoperability of microfluidic devices LBI/1/2 ISO Surface chemical analysis. Secondary ion mass spectrometry. Method for the measurement of mass resolution in SIMS CII/60 ISO Graphic technology. Communication of ink properties PAI/43 ISO/TS Solid recovered fuels. Determination of elemental composition by X-ray fluorescence PTI/17 ISO Nuclear criticality safety. Solid waste (excluding irradiated and non-irradiated fuel) NCE/9 ISO Acoustics. Acoustic quality of open office spaces EH/1/3 ISO Petroleum and natural gas industries. Pipeline integrity assessment specification PSE/17 ISO Temperature controlled transport packaging. General requirements of temperature controlled transport packages for parcel shipping PKW/0 ISO Temperature controlled transport packaging. General specifications of testing of temperature controlled transport packages for parcel shipping PKW/0 ISO/TR Reusable transport packaging. Cleaning and sanitation methods of reusable transport containers for food distribution purpose PKW/0 ISO Space systems. Determination of material or component properties required for break-up models used for earth re-entry ACE/68 ISO/TS Graphic technology. Assessment and validation of the performance of spectrocolorimeters and spectrodensitometers PAI/43 ISO Meteorology. Ground-based remote sensing of wind. Radar wind profiler EH/2 ISO Biotechnology. Cell characterization. General guide for characterization of human cells for therapeutic applications BTI/1 ISO/TS Nanotechnologies. Method for quantification of cellular uptake of carbon nanomaterials by using optical absorption measurement NTI/1 48 Prices may be subject to change. Update Standards December 2017

49 ISO/IEC TR Information technology. Programming languages. Guide for the use of the Ada Ravenscar profile in high integrity systems will supersede PD ISO/IEC TR 24718:2005 IST/5 ISO/IEC Identification cards. Card service life. Application profiles and requirements will supersede BS ISO/IEC :2012 IST/17 ISO/IEC Identification cards. Card service life. Methods of evaluation will supersede BS ISO/IEC :2011 IST/17 ISO/TR Lifts and escalators subject to seismic conditions. Compilation report MHE/4 ISO Road vehicles. End-of-life activation of onboard pyrotechnic devices. General information and use case definitions will supersede BS ISO :2008 AUE/-/1 ISO Road vehicles. End-of-life activation of onboard pyrotechnic devices. Communication requirements will supersede BS ISO :2008 AUE/-/1 ISO Road vehicles. End-of-life activation of onboard pyrotechnic devices. Tool requirements will supersede BS ISO :2009 AUE/-/1 ISO Road vehicles. End-of-life activation of onboard pyrotechnic devices. Additional communication line with bidirectional communication will supersede BS ISO :2009 AUE/-/1 ISO Road vehicles. End-of-life activation of onboard pyrotechnic devices. Additional communication line with pulse width modulated signal will supersede BS ISO :2009 AUE/-/1 ISO Plastics. Determination of total luminous transmittance and reflectance PRI/21 ISO Space systems. Re-entry risk management for unmanned spacecraft and launch vehicle orbital stages will supersede BS ISO 27875:2010+A1:2016 ACE/68 ISO Learning services outside formal education. Additional requirements for distance learning IST/43 ISO Learning services outside formal education. Terminology IST/43 ISO Information and documentation. Management systems for records. Fundamentals and vocabulary will supersede BS ISO 30300:2011 IDT/2/17 ISO Information and documentation. Management systems for records. Requirements will supersede BS ISO 30301:2011 IDT/2/17 ISO/TS Human resource management. Impact of hire metric HCS/1/2 ISO/TS Human resource management. Quality of hire HCS/1/2 ISO Innovation management. Fundamentals and vocabulary IMS/1 DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT NATIONAL BRITISH STANDARDS The following national standards have all been issued, or are about to be issued, for public comment. You may comment online on any British Standard of national origin using the BSI Draft Review system. All you need to do is register at This service is free of charge. Deadlines for receipt of comments on each of the individual drafts can be found at IMPORTANT NOTICE: The BSI Draft Review system is being replaced by the new Standards Development Portal. If you cannot find the draft you are looking for on the Draft Review system, please try searching for it the Standards Development portal: p.com/. The service is free of charge. If you would like to receive these drafts in hard copy format, they are available for a fee from BSI Customer Services (see How to order on page 2). 17/ DC BS 8415 Monuments within burial grounds and memorial sites. Specification B/ January, 2018 DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT ADOPTIONS You may comment online on draft standards issued by CEN and ISO. The BSI Draft Review system has been modified to accommodate a wider range of standards content. The purpose of the website is to enhance access to Drafts for Public Comment for the wider community, make comments more visible and move into collaborative working practices. All you need to do is register at This service is free of charge. IMPORTANT NOTICE: The BSI Draft Review system is being replaced by the new Standards Development Portal. If you cannot find the draft you are looking for on the Draft Review system, please try searching for it the Standards Development portal: p.com/. The service is free of charge. Please note that CENELEC and IEC standards are not included on the BSI Draft Review system at this time, but are available in hard copy format from BSI Customer Services. All draft British Standards are available in hard copy format from BSI Customer Services (see How to order on page 2). Most drafts are charged at to members and for non-members. Larger draft documents are charged at a higher price according to the number of pages and, are priced individually below. Comments on all Draft British Standards are welcome and should be sent to Debbie Stead, Head of Committee Service Centre and International Secretariat, BSI Group, 389 Chiswick High Road, London W4 4AL. Draft standards may be modified before adoption and issue as British Standards. 17/ DC BS ISO Carbon dioxide capture, transportation and geological storage. Carbon dioxide storage using enhanced oil recovery (CO2-EOR) PSE/ December, 2017 Update Standards December 2017 Prices may be subject to change. 49

50 Drafts for Public Comment continued... 17/ DC BS ISO Fine Ceramics (advanced ceramics, advanced technical ceramics). Thermophysical properties of ceramic composites. Determination of unidimensional thermal diffusivity by flash method RPI/13 26 December, / DC BS ISO Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems. Part 11. Coating repairs on rehabilitation PSE/17/2 26 December, / DC BS ISO Road vehicles. Information for first and second responders. Part 2. Rescue sheet for buses, coaches and heavy commercial vehicles AUE/7 3 December, / DC BS ISO Road vehicles. Information for first and second responders. Part 3. Emergency response guide template AUE/7 5 December, / DC BS ISO PPE ensembles for firefighters undertaking specific rescue activities. Part 5. Helmet PH/14 6 December, / DC BS ISO Treated wastewater reuse for irrigation. Guidelines for the adaptation of irrigation systems and practices to treated wastewater B/505/50 13 December, / DC BS ISO Guidelines for performance evaluation of treatment technologies for water reuse systems. Part 1. General B/505/50 28 December, / DC BS ISO Guidelines for water quality grade classification for water reuse B/505/50 28 December, / DC BS ISO Tractors and machinery for agriculture and forestry. Camera interface between tractor and implement. Part 1. Analogue camera interface AGE/6 28 December, / DC BS ISO Walking trolleys. Requirements and test methods CH/173 3 December, / DC BS ISO Ships and marine technology. Gate valves for use in low temperature applications. Design and testing requirements SME/32 7 December, / DC BS ISO Ships and marine technology. Check valves for use in low temperature applications. Design and testing requirements SME/32 7 December, / DC BS ISO Fluid power. Specifications of reference dictionary. Part 2. Classes and properties definitions for pneumatics members, non-members MCE/18 4 December, / DC BS ISO Martial arts. Wushu Taiji sword. Requirements and test method SW/ December, / DC BS ISO Agricultural vehicles. Mechanical connections between towed and towing vehicles. Dimensions of ball-type coupling device (80 mm) AGE/6 3 December, / DC BS ISO 9161 Uranium dioxide powder. Determination of apparent density and tap density NCE/9 25 December, / DC BS ISO Intelligent transport systems. Cooperative adaptive cruise control systems (CACC). Performance requirements and test procedures EPL/ December, / DC BS ISO Vacuum technology. Standard methods for measuring vacuum-pump performance. Part 4. Turbomolecular vacuum pumps MCE/8/-/4 25 December, / DC BS ISO Martial arts. Wushu Taiji clothing. Requirements and test method SW/ December, / DC BS EN ISO Soil quality. Determination of effective cation exchange capacity (CEC) and exchangeable cations using a hexammine cobalt trichloride solution EH/4 7 December, / DC BS ISO Optics and photonics. Optical coatings. Part 8. Coatings used for laser optics CPW/ December, / DC BS ISO Fibre ropes. Electrostatic surface potential measuring method TCI/24 26 December, / DC BS ISO Liming materials. Determination of size distribution by dry and wet sieving CII/37 17 December, / DC BS ISO Textiles. Man-made fibres. Determination of dye-uptake of cationic dyeable modified polyester fibres TCI/24 26 December, / DC BS ISO Silk. Test method for size of silk yarns TCI/24 31 December, Prices may be subject to change. Update Standards December 2017

51 17/ DC BS ISO Ships and marine technology. Butterfly valves for use in low temperature applications. Design and testing requirements SME/32 4 December, / DC BS ISO Earth-moving machinery. Operator s controls B/513/1 12 December, / DC BS ISO Fine ceramics (advanced ceramics, advanced technical ceramics). Qualitative and semiquantitative assessment of the photocatalytic activities of surfaces by the reduction of resazurin in a deposited ink film RPI/13 17 December, / DC BS ISO/IEC Information technology. Automatic identification and data capture techniques. Part 21. Crypto suite SIMON security services for air interface communications IST/34 4 December, / DC BS ISO/IEC Information technology. Automatic identification and data capture techniques. Part 22. Crypto suite SPECK security services for air interface communications IST/34 4 December, / DC BS ISO Corrosion of metals and alloys. Measurement of environmentally assisted small crack growth rate ISE/NFE/8 1 January, / DC BS ISO/IEC Information technology. Best practices for slap ten print fingerprint capture IST/44 19 December, / DC BS EN 1175 Safety of industrial trucks. Electrical/electronic requirements MHE/7 26 December, / DC BS ISO Tools for pressing. Spring plungers with helicoidal compression steel spring or gas spring MTE/12 14 December, / DC BS EN ISO Geotextiles and geotextilerelated products. Determination of water permeability characteristics normal to the plane, without load B/ December, / DC BS ISO/IEC Information technology. Media context and control. Part 3. Sensory information members, non-members IST/37 20 December, / DC BS EN ISO 3405 Petroleum and related products from natural or synthetic sources. Determination of distillation characteristics at atmospheric pressure PTI/2 17 December, / DC BS ISO Wheat flour and durum wheat semolina. Determination of impurities of animal origin AW/4 4 December, / DC BS EN ISO Greenhouse gases. Carbon footprint of products. Requirements and guidelines for quantification SES/1/7 3 December, / DC BS EN 1656 Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in the veterinary area. Test method and requirements (phase 2, step 1) CH/216 5 December, / DC BS ISO Ships and marine technology. Specification of high manganese austenitic steel used for LNG tanks on board ships SME/32 12 December, / DC BS ISO Microbiology of the food chain. Horizontal method for the enumeration of psychrotrophic microorganisms AW/9 26 December, / DC BS ISO Earth-moving machinery. Safety. Part 15. Requirements for compact tool carriers B/513/1 28 December, / DC BS ISO Technical product documentation (TPD). General requirements of mechanical product digital manual TDW/4 4 January, / DC BS ISO Road vehicles. Fuse-links. Part 6. Single-bolt fuse-links AUE/32 27 December, / DC BS ISO/IEC Information technology. High efficiency coding and media delivery in heterogeneous environments. Part 9. 3D Audio conformance testing members, non-members IST/37 20 December, / DC BS ISO/IEC AMD3 Information technology. MPEG audio technologies. Part 4. Dynamic Range Control IST/37 21 December, / DC BS EN Butt-welding pipe fittings. Part 2. Non alloy and ferritic alloy steels with specific inspection requirements members, non-members ISE/ January, / DC BS EN Butt-welding pipe fittings. Part 4. Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements members, non-members ISE/ January, 2018 Update Standards December 2017 Prices may be subject to change. 51

52 Drafts for Public Comment continued... 17/ DC BS EN Rotating electrical machines. Part 2-3. Specific test methods for determining losses and efficiency of converter-fed AC motor PEL/2 27 December, / DC BS ISO Nuclear fuel technology. Dissolution of plutonium dioxide-containing materials. Part 1. Dissolution of plutonium dioxide powders NCE/9 26 December, / DC BS ISO Nuclear fuel technology. Dissolution of plutonium dioxide-containing materials. Part 2. Dissolution of MOX pellets and powders NCE/9 26 December, / DC BS EN Superconducting AC power cables and their accessories for rated voltages from 6 kv to 500 kv. Test methods and requirements GEL/20/17 13 December, / DC BS ISO Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation. Fundamentals and application. Part 1. Elementary applications NCE/2 26 December, / DC BS ISO Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation. Part 2. Advanced applications NCE/2 26 December, / DC BS ISO Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation. Fundamentals and application. Part 3. Applications to unfolding methods NCE/2 25 December, / DC BS ISO/IEC Information technology. User interface accessibility. Part 1. User accessibility needs members, non-members ICT/-/6 28 December, / DC BS EN ISO 2085 Anodizing of aluminium and its alloys. Check for continuity of thin anodic oxidation coatings. Copper sulfate test STI/33 21 December, / DC BS EN ISO 2376 Anodizing of aluminium and its alloys. Determination of electric breakdown potential STI/33 21 December, / DC BS EN ISO 3211 Anodizing of aluminium and its alloys. Assessment of resistance of anodic oxidation coatings to cracking by deformation STI/33 21 December, / DC BS EN ISO 6581 Anodizing of aluminium and its alloys. Determination of the comparative fastness to ultraviolet light and heat of coloured anodic oxidation coatings STI/33 21 December, / DC BS EN ISO 8993 Anodizing of aluminium and its alloys. Rating system for the evaluation of pitting corrosion. Chart method STI/33 21 December, / DC BS EN ISO Ceramic tiles. Part 4. Determination of modulus of rupture and breaking strength B/539 3 December, / DC BS ISO Vacuum technology. Vacuum gauges. Specifications, calibration and measurement uncertainties for capacitance diaphragm gauge MCE/8/-/4 26 December, / DC BS EN ISO Sterile hypodermic syringes for single use. Part 4. Syringes with re-use prevention feature. CH/84 14 December, / DC BS ISO Tobacco and tobacco products. Determination of tobacco-specific nitrosamines in tobacco products. Method using LC-MS/MS AW/40 5 December, / DC BS EN Secure storage units. Classification and methods of test for resistance to fire. Light fire storage units GW/2 12 December, / DC BS EN Secure storage units. Classification and methods of test for resistance to fire. Part 1. Data cabinets and diskette inserts GW/2 26 January, / DC BS EN Secure storage units. Classification and methods of test for resistance to fire. Part 2. Data rooms and data container GW/2 26 January, / DC BS ISO/IEC Information technology. Software and systems engineering. Tools and methods for product line realization IST/15 18 December, / DC BS ISO/IEC Information technology. Software and systems engineering. Tools and methods for product line organizational management IST/15 18 December, / DC BS ISO/IEC AMD1 Identification cards. Integrated circuit cards. Part 4. Organization, security and commands for interchange IST/17 6 December, Prices may be subject to change. Update Standards December 2017

53 17/ DC BS ISO/IEC AMD2 Identification cards. Integrated circuit cards. Part 4. Organization, security and commands for interchange IST/17 6 December, / DC BS ISO/IEC Information technology. Software and systems engineering. Tools and methods for product line testing IST/15 18 December, / DC BS EN Methods of test for masonry units. Part 22. Determination of freeze/thaw resistance of clay masonry units B/ January, / DC BS EN AMD1 Chemical disinfectants and antiseptics. Quantitative surface test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in veterinary area on porous surfaces without mechanical action. Test method and requirements (phase 2, step 2) CH/ January, / DC BS ISO/IEC AMD4 Information technology. Lossy/lossless coding of bi-level images IST/37 10 December, / DC BS ISO Soil quality. Inhibition of reproduction of soil mite (Hypoaspis aculeifer) by soil contaminants EH/4 4 January, / DC BS IEC Rotating electrical machines. Part 34. AC adjustable speed rolling mill motors PEL/2 27 December, / DC BS EN Apparatus for lighting purposes. Non-active mode power measurement CPL/34 6 December, / DC BS EN AMD1 Railway applications. Aerodynamics. Part 4. Requirements and test procedures for aerodynamics on open track RAE/1/-/4 19 December, / DC BS ISO Road vehicles. Automotive cables. Part 1. Terminology and design guidelines AUE/32 31 December, / DC BS ISO Road vehicles. Automotive cables. Part 2. Test methods AUE/32 31 December, / DC BS ISO Road vehicles. Automotive cables. Part 3. Dimensions and requirements for 30 V a.c. or 60 V d.c. single core copper conductor cables AUE/32 31 December, / DC BS ISO Road vehicles. Automotive cables. Part 4. Dimensions and requirements for 30 V a.c. and 60 V d.c. single core aluminium conductor cables AUE/32 31 December, / DC BS ISO Road vehicles. Automotive cables. Part 5. Dimensions and requirements for 600 V a.c. or 900 V d.c., 1000 V a.c. or 1500 V d.c. single core copper conductor cables AUE/32 31 December, / DC BS ISO Road vehicles. Automotive cables. Part 6. Dimensions and requirements for 600 V a.c. or 900 V d.c., 1000 V a.c. or 1500 V d.c. single core aluminium conductor cables AUE/32 31 December, / DC BS ISO Road vehicles. Automotive cables. Part 7. Dimensions and requirements for 30 V a.c. or 60 V d.c. round, sheathed, screened and unscreened multi and single core copper conductor cables AUE/32 31 December, / DC BS ISO Road vehicles. Automotive cables. Part 8. Dimensions and requirements for 30 V a.c. or 60 V d.c. round, sheathed, screened and unscreened multi and single core aluminium conductor cables AUE/32 31 December, / DC BS ISO Road vehicles. Automotive cables. Part 9. Dimensions and requirements for 600 V a.c. or 900 V d.c., 1000 V a.c. or 1500 V d.c. round, sheathed, screened and unscreened multi and single core copper conductor cables AUE/32 31 December, / DC BS ISO Road vehicles. Automotive cables. Part 10. Dimensions and requirements for 600 V a.c. or 900 V d.c., 1000 V a.c. or 1500 V d.c. round, sheathed, screened and unscreened multi and single core aluminium conductor cables AUE/32 31 December, / DC BS ISO Asset management. Management systems. Guidelines for the application of ISO AMS/1 14 December, / DC BS ISO/IEC Identification cards. ICCmanaged devices. Part 4. Test methods for logical characteristics IST/17 6 December, / DC BS ISO Document management applications. Minimum requirements for the storage of documents. Part 3. Disposal IDT/1 26 December, 2017 Please do not send confirmation of orders placed by telephone as it can lead to duplication Update Standards December 2017 Prices may be subject to change. 53

54 Drafts for Public Comment continued... 17/ DC BS ISO Space systems. Integrated logistic support ACE/68 21 December, / DC BS ISO Cigarettes. Determination of selected carbonyls in the mainstream smoke of cigarettes. Method using high performance liquid chromatography AW/40 14 December, / DC BS ISO Cigarettes. Determination of selected volatile organic compounds in the mainstream smoke of cigarettes. Method using GC/MS AW/40 14 December, / DC BS EN LPG equipment and accessories. Inspection and requalification of LPG pressure vessels up to and including 13 m 3 PVE/19 26 January, / DC BS EN LPG equipment and accessories. Inspection and requalification of LPG pressure vessels greater than 13 m 2 PVE/19 26 January, / DC BS EN Cranes. Bridge and gantry cranes MHE/3/3 5 December, / DC BS IEC/IEEE Nuclear facilities. Instrumentation important to safety. Spent fuel pool instrumentation NCE/8 30 November, / DC BS ISO/IEC AMD3 Information technology. MPEG systems technologies. Part 11. Energy-efficient media consumption (green metadata) IST/37 18 December, / DC BS ISO/IEC Information technology. MPEG systems technologies. Part 13. Media orchestration IST/37 21 December, / DC BS EN Secondary cells and batteries containing alkaline or other non-acid electrolytes. Performance of secondary lithium batteries for use in road vehicles not for the propulsion PEL/21/1 15 December, / DC BS ISO Carbonate liming materials. Determination of reactivity. Automatic titration method with citric acid CII/37 31 December, / DC BS ISO/IEC Information technology. Media context and control. Part 5. Data formats for interaction devices members, non-members IST/37 5 December, / DC BS ISO/IEC Information technology. Media context and control. Part 6. Common types and tools members, non-members IST/37 4 December, / DC BS ISO Ships and marine technology. Pilot ladders. Part 1. Design and specification SME/32 3 December, / DC BS EN Fertilizers and liming materials. Vocabulary. Part 3. Terms relating to liming materials CII/37 5 December, / DC BS ISO/IEC Information technology. Media context and control. Part 4. Virtual world object characteristics members, non-members IST/37 20 December, / DC BS ISO/IEC Information technology. Media context and control. Part 2. Control information members, non-members IST/37 18 December, / DC BS EN Safety and control devices for burners and appliances burning gaseous and/or liquid fuels. General requirements members, non-members GSE/22 26 January, / DC BS EN Domestic cooking appliances burning gas. Part 1-1. Safety. General members, non-members GSE/35 5 December, / DC BS EN ISO Leather. Chemical determination of formaldehyde content. Part 1. Method using high performance liquid chromatography TCI/69 24 December, / DC BS EN ISO Leather. Chemical determination of formaldehyde content. Part 2. Method using colorimetric analysis TCI/69 24 December, / DC BS EN Railway applications. Current collection systems. Technical criteria for the interaction between pantograph and overhead line (to achieve free access) GEL/9/3 3 January, / DC BS ISO/IEC Information technology. Dynamic adaptive streaming over HTTP (DASH). Part 4. Segment encryption and authentication IST/37 26 December, / DC BS EN Connectors for electronic equipment. Product requirements. Detail specification for 2-way, shielded and unshielded, free and fixed connectors for data transmission up to 600MHz with current carrying capacity EPL/48 27 December, / DC BS EN 71-3 AMD3 Safety of toys. Part 3. Migration of certain elements CW/15 12 December, Prices may be subject to change. Update Standards December 2017

55 17/ DC BS EN ISO Soil quality. Determination of selected organotin compounds. Gaschromatographic method EH/4 14 December, / DC BS EN Industrial, commercial and garage doors and gates. Safety devices for power operated doors and gates. Requirements and test methods B/538/1 12 December, / DC BS EN 598 Coated and lined ductile iron pipes, fittings and their joints for sewerage and drainage applications. Products characteristics and test and assessment methods PSE/10 19 December, / DC BS EN 1440 AMD1 LPG equipment and accessories. Transportable refillable traditional welded and brazed steel Liquefied Petroleum Gas (LPG) cylinders. Periodic inspection PVE/19 19 December, / DC BS EN LPG equipment and accessories. Essential operational dimensions for LPG cylinder valve outlet and associated equipment connections PVE/19 26 January, / DC BS EN LPG equipment and accessories. Specification and testing for Liquefied Petroleum Gas (LPG) pressure vessel valves and fittings PVE/19 5 December, / DC BS EN Tanks for the transport of dangerous goods. Metallic pressure tanks. Design and construction AUE/18 26 January, / DC BS EN Industrial communication networks. Wireless communication networks. Part 4. Coexistence management with central coordination of wireless applications GEL/65 2 November, / DC BS EN ISO Corrosion of metals and alloys. Stress corrosion testing. Part 6. Preparation and use of precracked specimens for tests under constant load or constant displacement ISE/NFE/8 5 December, / DC BS EN Liquid petroleum products. Determination of the total volatile sulfur content in liquefied petroleum gases by ultraviolet fluorescence PTI/15 12 December, / DC BS EN Ladders. Part 6. Telescopic ladders B/ December, / DC BS EN Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure. Oriented unplasticized poly(vinyl chloride) (PVC-O). Part 2. Pipes PRI/88/2 26 December, / DC BS EN Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure. Oriented unplasticized poly(vinyl chloride) (PVC-O). Part 1. General PRI/88/2 26 December, / DC BS EN Plastic piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure. Oriented unplasticized poly(vinyl chloride) (PVC-O). Part 3. Fittings PRI/88/2 26 December, / DC BS EN Plastic piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure. Oriented unplasticized poly(vinyl chloride) (PVC-O). Part 5. Fitness for purpose of the system PRI/88/2 26 December, / DC BS EN AMD1 Thermal energy meters. Part 1. General requirements CPI/30 5 December, / DC BS EN AMD1 Thermal energy meters. Part 4. Pattern approval tests CPI/30 5 December, / DC BS EN AMD1 Thermal energy meters. Part 5. Intitial verification tests CPI/30 5 December, / DC BS EN AMD1 Thermal energy meters. Part 6. Installation, commissioning, operational monitoring and maintenance CPI/30 5 December, / DC BS EN AMD1 Thermal energy meters. Part 2. Constructional requirements CPI/30 5 December, / DC BS EN 416 Gas-fired overhead radiant tube heaters and radiant tube heater systems for non-domestic use. Safety and energy efficiency members, non-members GSE/20 19 December, / DC BS EN AMD1 Bituminous mixtures. Test methods. Part 2. Determination of particle size distribution B/510/1 26 December, / DC BS EN Natural stone test methods. Determination of sensitivity to changes in appearance produced by thermal cycles B/ December, / DC BS EN Glass packaging. Crown cap. 26 mm intermediate depth crown cap PKW/0/-/7 12 December, / DC BS EN Packaging. Cork mouth finish with a bore diameter of 18,5 mm for corks and tamper evident capsules PKW/0/-/7 5 December, 2017 Update Standards December 2017 Prices may be subject to change. 55

56 Drafts for Public Comment continued... 17/ DC BS EN Road vehicles. Supplementary grip devices for tyres of passenger cars and light duty vehicles. Part 1. General safety and performance requirements PEL/69 12 December, / DC BS EN Soil, treated biowaste and sludge. Determination of dioxins and furans and dioxinlike polychlorinated biphenyls by gas chromatography with high resolution mass selective detection (HR GC-MS) EH/4 19 December, / DC BS EN Soil, treated biowaste and sludge. Determination of polychlorinated biphenyls (PCB) by gas chromatography with mass selective detection (GC-MS) and gas chromatography with electron-capture detection (GC-ECD) EH/4 19 December, / DC BS EN Soil, treated biowaste and sludge. Determination of polycyclic aromatic hydrocarbons (PAH) by gas chromatography (GC) and high performance liquid chromatography (HPLC) EH/4 19 December, / DC BS EN AMD1 Curtain walling. Determination of the strength of sheared connections. Test method and requirements B/538/6 26 December, 2017 Help Us to Help You! Always quote your Customer Number Don t know your number? Contact Customer Services who will be happy to check it for you 17/ DC BS EN Paints and varnishes. Coating materials and coating systems for exterior wood. Part 10. Resistance to blocking of paints and varnishes on wood STI/28 26 December, / DC BS EN Rough-terrain trucks. Safety requirements and verification. Part 7. Test method and determination of noise emission MHE/7 26 January, / DC BS EN Industrial trucks. Safety requirements and verification. Part 3. Supplementary requirements for trucks with elevating operator position and trucks specifically designed to travel with elevated loads (additional requirements to EN ) MHE/7 26 December, / DC BS EN Industrial trucks. Safety requirements and verification. Part 2. Supplementary requirements for self-propelled variable-reach trucks MHE/7 26 December, / DC BS EN Machines for mechanical processing of minerals and similar solid materials. Safety. Part 4. Specific requirements for screening machinery B/513/3 19 December, / DC BS EN Machines for mechanical processing of minerals and similar solid materials. Safety. Part 5. Specific requirements for cleaning, recycling, sorting and mud treatment machinery B/513/3 19 December, / DC BS EN Machines for mechanical processing of minerals and similar solid materials. Safety. Part 2. Specific requirements for feeding machinery and continuous handling equipment B/513/3 19 December, / DC BS EN Machines for mechanical processing of minerals and similar solid materials. Safety. Part 3. Specific requirements for crushing and milling machinery B/513/3 19 December, / DC BS EN Machines for mechanical processing of minerals and similar solid materials. Safety. Part 1. Common requirements for partly completed machinery and processing plants B/513/3 19 December, / DC BS EN Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Polyethylene (PE). Part 1. Requirements for pipes, fittings and the system PRI/88/1 26 December, / DC BS EN Passive safety of support structures for road equipment. Requirements and test methods B/509/10 26 January, / DC BS EN AMD1 LPG equipment and accessories. Pressure relief valves for LPG pressure vessels. Ancillary equipment PVE/19 26 December, / DC BS EN Conservation of cultural heritage. Characterization of mortars used in cultural heritage B/ January, / DC BS EN High-voltage switchgear and controlgear. Gas-filled wrought aluminium and aluminium alloy enclosures PEL/17/1 3 January, / DC BS EN High-voltage switchgear and controlgear. Gas-filled welded composite enclosures of cast and wrought aluminium alloys PEL/17/1 3 January, Prices may be subject to change. Update Standards December 2017

57 17/ DC BS EN ISO Petroleum and natural gas industries. Specific requirements for offshore structures. Part 7. Stationkeeping systems for floating offshore structures and mobile offshore units members, non-members B/525/12 31 December, / DC BS EN Lubricants. Determination of aerobic biological degradation of fully formulated lubricants in an aqueous solution. Test method based on CO2-production. MCE/18/-/16 26 December, / DC BS EN Gas-fired domestic appliances producing hot water. Part 2. Assessment of energy consumption GSE/29 26 January, / DC BS EN Glass in building. Thermally toughened soda lime silicate safety glass. Part 2. Product standard B/ December, / DC BS EN Glass in building. Laminated glass and laminated safety glass. Product standard B/ December, / DC BS EN Glass in building. Heat soaked thermally toughened soda lime silicate safety glass. Part 2. Product standard B/ December, / DC BS EN Fume cupboards. Part 3. Type test methods LBI/1/1 26 January, / DC BS EN ISO AMD1 Thermal insulating products for building applications. Determination of short-term water absorption by partial immersion B/540/8 30 November, / DC BS EN ISO Thermal insulating products for building applications. Determination of long-term water absorption by immersion B/540/8 30 November, / DC BS EN ISO Thermal insulating products for building applications. Determination of long-term water absorption by diffusion B/540/8 30 November, / DC BS ISO/IEC Information technology. Radio frequency identification for item management. Unique identification for RF tags. Part 1. Unique identification for RF tags numbering systems IST/-/99 14 December, / DC BS ISO Health informatics. Time standards for healthcare specific problems IST/35 6 December, / DC BS EN Procedure for the assessment of the exposure of workers to electromagnetic fields GEL/106 3 January, / DC BS EN AMD2 Voltage characteristics of electricity supplied by public electricity networks GEL/8 3 January, / DC BS EN AMD3 Voltage characteristics of electricity supplied by public electricity networks GEL/8 3 January, / DC BS ISO/IEC AMD4 Information technology. Multimedia framework (MPEG 21). Part 8. Reference software IST/37 21 December, / DC BS ISO AMD1 Cycles. Lighting and retro-reflective devices. Part 2. Retro-reflective devices GME/25 25 December, / DC BS EN ISO 3104 Petroleum products. Transparent and opaque liquids. Determination of kinematic viscosity and calculation of dynamic viscosity PTI/13 17 December, / DC BS ISO/IEC Information technology. Collection of graphical symbols for office equipment members, non-members ICT/-/6 27 December, / DC BS ISO Milk, milk products, infant formula and adult nutritionals. Determination of chloride. Potentiometric titration method AW/5 25 December, / DC BS ISO Milk, milk products, infant formula and adult nutritionals. Determination of minerals and trace elements. Inductively coupled plasma atomic emission spectrometry (ICP-AES) method AW/5 26 December, / DC BS ISO Milk, milk products, infant formula and adult nutritionals. Determination of minerals and trace elements. Inductively coupled plasma mass spectrometry (ICP-MS) method AW/5 26 December, / DC BS ISO Pneumatic fluid power. Push-in connectors for thermoplastic tubes MCE/18 1 January, / DC BS EN ISO AMD1 Protective gloves against dangerous chemicals and microorganisms. Part 1. Terminology and performance requirements for chemical risks PH/3/8 21 December, 2017 Update Standards December 2017 Prices may be subject to change. 57

58 Drafts for Public Comment continued... 17/ DC BS EN Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous. Part 006. Protective cap for receptacle. Product standard ACE/6 4 December, / DC BS EN Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous. Part 007. Protective cap for plug. Product standard ACE/6 4 December, / DC BS EN Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous. Part 008. Non release plug with grounding ring. Product standard ACE/6 4 December, / DC BS EN Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous. Part 009. Receptacle, round flange, jamnut mounting. Product standard ACE/6 4 December, / DC BS EN Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous. Part 010. Receptacle, hermetic, round flange, jam nut mounting. Product standard ACE/6 4 December, / DC BS EN High-voltage switchgear and controlgear. Part 109. Alternating-current series capacitor by-pass switches members, non-members PEL/17/1 6 December, / DC BS EN Aerospace series. Flammability of non-metallic materials. Part 1. Small burner test, vertical. Determination of the vertical flame propagation ACE/65 17 December, / DC BS EN Aerospace series. Flammability of non-metallic materials. Part 2. Small burner test, horizontal. Determination of the horizontal flame propagation ACE/65 17 December, / DC BS EN Aerospace series. Flammability of non-metallic materials. Part 3. Small burner test, 45. Determination of the resistance of material to flame and glow propagation and to flame penetration ACE/65 17 December, / DC BS EN Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family. Jacketed or screened and jacketed. Part 002. General ACE/6 17 December, / DC BS EN Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family. Jacketed or screened and jacketed. Part 003. Tin plated copper. Operating temperatures, between -65 C and 135 C. Single extruded wall for open applications, with jacket without screen. UV laser printable. Product standard ACE/6 17 December, / DC BS EN Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family. Jacketed or screened and jacketed. Part 004. Tin plated copper. Operating temperatures, between -65 C and 135 C. Single extruded wall for open applications, with jacket and screen (braid). UV laser printable. Product standard ACE/6 17 December, / DC BS EN Aerospace series. Cables, electrical, for general purpose, single and multicore assembly XLETFE. Family jacketed or screened and jacketed. Part 005. Tin plated copper. Operating temperatures, between 65 C and 135 C. Dual extruded wall for open applications, with jacket without screen UV laser printable. Product standard ACE/6 17 December, / DC BS EN Aerospace series. Cables, electrical, for general purpose, single and multicore assembly XLETFE. Family jacketed or screened and jacketed. Part 006. Tin plated copper. Operating temperatures, between 65 C and 135 C. Dual extruded wall for open applications, with jacket and screen (braid). UV laser printable. Product standard ACE/6 17 December, / DC BS EN Aerospace series. Cables, electrical, for general purpose, single and multicore assembly XLETFE. Family jacketed or screened and jacketed. Part 007. Silver plated copper. Operating temperatures, between 65 C and 150 C. Single extruded wall for open applications, with jacket without screen. UV laser printable. Product standard ACE/6 17 December, / DC BS EN Aerospace series. Cables, electrical, for general purpose, single and multicore assembly XLETFE. Family jacketed or screened and jacketed. Part 010. Silver plated copper. Operating temperatures, between 65 C and 150 C. Dual extruded wall for open applications, with jacket and screen (braid). UV laser printable. Product standard ACE/6 17 December, / DC BS EN Aerospace series. Cables, electrical, for general purpose, single and multicore assembly XLETFE. Family jacketed or screened and jacketed. Part 011. Nickel plated copper. Operating temperatures, between 65 C and 150 C. Dual extruded wall for open applications, with jacket without screen. UV laser printable. Product standard ACE/6 17 December, / DC BS EN Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family. Jacketed or screened and jacketed. Part 012. Nickel plated copper. Operating temperatures, between -65 C and 150 C. Dual extruded wall for open applications, with jacket and screen (braid). UV laser printable. Product standard ACE/6 17 December, Prices may be subject to change. Update Standards December 2017

59 This IVD-only international medical device standard replaces previous technical report Following the 2016 publication of an international standard on non-ivd devices, a standard that includes the specific essential principles for IVD devices has now been published. BS ISO :2017 Medical devices -- Recognized essential principles of safety and performance of medical devices -- Part 2: General essential principles and additional specific essential principles for all IVD medical devices and guidance on the selection of standards identifies the significant standards and guides that can be used to assess if a medical device is safe and performs as intended. When the technical report on which it was based ISO/TR was revised, the technical committee decided to split the standard between non-ivd and IVD medical devices. This part includes the specific essential principles for all IVD medical devices which were not included in the scope of part one. Six general principles for safety and performance are outlined that apply to all IVD medical devices. The standard also describes fundamental design and manufacturing criteria. Find out more shop.bsigroup.com/ To contact us visit shop.bsigroup.com/ or contact Customer Services quoting marketing reference code US T F orders@bsigroup.com shop.bsigroup.com/ Standards and publications may also be ordered via the BSI shop at shop.bsigroup.com *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call BSI British Standards Institution 2017

60 Drafts for Public Comment continued... 17/ DC BS EN Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family jacketed or screened and jacketed. Part 008. Silver plated copper Operating temperatures, between -65 C and 150 C Single extruded wall for open applications, with jacket and screen (braid) UV laser printable. Product standard ACE/6 15 December, / DC BS EN Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family jacketed or screened and jacketed. Part 009. Silver plated copper Dual extruded wall for open applications, with jacket without screen UV laser printable. Product standard ACE/6 15 December, / DC BS EN 4860 Aerospace series. Environmental testing. Test Xb. A brasion of markings, letterings, surfaces and materials caused by rubbing of fingertips and hands ACE/6 5 January, / DC BS EN 4861 Aerospace series. Metrological assessment procedure for kinematic fields measured by Digital Image Correlation ACE/6 5 January, / DC BS EN 7010 Aerospace series. User guide for creation and designation of bolts ACE/12 31 December, 2017 DOCUMENTS NOT ISSUED AS DPCs Comments can be sent by or by post to named contacts at: BSI Group 389 Chiswick High Road London W4 4AL ISO/FDIS Rolling bearings. Thermal speed rating. Calculation and coefficients The above has recently been issued at FDIS stage. For any further information regarding this FDIS, please send a note to the contact point below. Contact: Committee Service Centre csc@bsigroup.com MCE/7 FprEN Aerospace series. Heat shrinkable moulded shapes. Technical specification The above has recently been issued at Formal Vote stage. For any further information regarding this Formal Vote, please send a note to the contact point below. Contact: Committee Service Centre csc@bsigroup.com ACE/6 FprEN 6126 Aerospace series. Fitting end, 24 internal cone, external thread, flareless type, size -32 tube diameter D=2 inches (D=50,8 mm) extra fine thread pitch inch series. Inch series. Design standard The above has recently been issued at Formal Vote stage. For any further information regarding this Formal Vote, please send a note to the contact point below. Contact: Committee Service Centre csc@bsigroup.com ACE/12 CEN EUROPEAN STANDARDS EUROPEAN RATIFIED TEXTS The documents listed below have recently been issued by CEN but have not yet been published as BS ENs. BSI has an obligation to adopt all ENs and to withdraw any conflicting British Standards (BSs) or parts of BSs. The following will be implemented as BS ENs or as amendments to BS ENs shortly. Notification of their implementation will be given in the BS EN Publications section of the relevant edition of Update Standards. EN 301:2017 Adhesives, phenolic and aminoplastic, for loadbearing timber structures. Classification and performance requirements PRI/52 EN 304:2017 Heating boilers. Test code for heating boilers for atomizing oil burners RHE/10 EN 1406:2017 Chemicals used for treatment of water intended for human consumption. Modified starches CII/59 EN 1853:2017 Agricultural machinery. Trailers. Safety AGE/32 EN :2017 Safety of woodworking machines. Circular sawing machines. Circular sawing machines for fire wood MTE/23 EN :2017 Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 C (or 125 C) continuous. Technical specification ACE/6 EN :2017 Aerospace series. Connectors, coaxial, radiofrequency. Specification of performances ACE/6 EN :2017 Aerospace series. Connectors, coaxial, radio frequency. Type 4 C interface. Crimp assembly version. Straight plug. Product standard ACE/6 EN 10207:2017 Steels for simple pressure vessels. Technical delivery requirements for plates, strips and bars ISE/107 EN :2017 Steel rod, bars and wire for cold heading and cold extrusion. General technical delivery conditions ISE/106 EN :2017 Steel rod, bars and wire for cold heading and cold extrusion. Technical delivery conditions for case hardening steels ISE/106 EN 12440:2017 Natural stone. Denomination criteria B/545 EN :2017 Founding. Radiographic testing. Techniques with digital detectors ISE/111 EN :2017 Building hardware. Hardware for windows and door height windows. Requirements and test methods for Tilt and Turn, Tilt-First and Turn- Only hardware B/538/1 EN 13227:2017 Wood flooring. Solid lamparquet products B/543 EN :2017 Stationary source emissions. Determination of low range mass concentration of dust. Manual gravimetric method EH/2/1 EN :2017 Stationary source emissions. Determination of low range mass concentration of dust. Quality assurance of automated measuring systems EH/2/1 60 Prices may be subject to change. Update Standards December 2017

61 BS AU b:2017 Tyres and wheels. Wheels and rims Section 7b: Code of practice for the selection and care of tyres and wheels for commercial vehicles To achieve the highest safety standards, this document provides authoritative guidance on how to do vehicle maintenance and repairs on the wheels of heavy commercial vehicles. It gives recommendations on selecting replacement tyres and wheels and on the care of tyres, wheels and wheel fixings. It also describes the principal types of wheels and fixings and the procedures to be carried out when fitting wheels. Who is this standard for? Tyre fitters (fixed and mobile) Vehicle repair garages Roadside assistance services Vehicle operators and drivers Suppliers of wheels, wheel nuts and studs, valves and tyres The standard also provides an authoritative and up-to-date reference source for: The Department for Transport DVSA Highways England and their counterparts in the devolved regions Road safety organizations Why should you use this standard? It supplies an up-to-date and authoritative source of safety information in an area where the HSE reports that two or three operators are killed every year. In addition, licensed operators of heavy commercial vehicles are under a statutory obligation to demonstrate their vehicles are roadworthy. The guidance contained in this standard is a constituent part of demonstrating that roadworthiness. Find out more shop.bsigroup.com/bsau50-2.7b To contact us visit shop.bsigroup.com/bsau50-2.7b or contact Customer Services quoting marketing reference code USBSAU50-2.7B T F orders@bsigroup.com shop.bsigroup.com/bsau50-2.7b Standards and publications may also be ordered via the BSI shop at shop.bsigroup.com *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call BSI British Standards Institution 2017

62 CEN European Standards continued... EN 13329:2016+A1:2017 Laminate floor coverings. Elements with a surface layer based on aminoplastic thermosetting resins. Specifications, requirements and test methods PRI/60 EN 13588:2017 Bitumen and bituminous binders. Determination of cohesion of bituminous binders with pendulum test PTI/13 EN 14069:2017 Liming materials. Denominations, specifications and labelling CII/37 EN 14298:2017 Sawn timber. Assessment of drying quality B/543 EN 14450:2017 Secure storage units. Requirements, classification and methods of test for resistance to burglary. Secure safe cabinets GW/2 EN 15507:2017 Packaging. Transport packaging for dangerous goods. Comparative material testing of polyethylene grades PKW/0/4 EN :2017 Sustainability of construction works. Sustainability assessment of buildings and civil engineering works. Framework on specific principles and requirement for civil engineering works B/558 EN 16640: Bio-based products. Bio-based carbon content. Determination of the bio-based carbon content using the radiocarbon method CORRIGENUM 1:November 2017 to EN 16640:2017 MI/2 EN 16766:2017 Bio-based solvents. Requirements and test methods MI/2 EN 16839:2017 Railway applications. Rolling stock. Head stock layout RAE/3/-/7 To order visit EN 16866:2017 Metallic and other inorganic coatings. Simultaneous thickness and electrode potential determination of individual layers in multilayer nickel deposits (STEP test) STI/33 EN 16869:2017 Design/construction of Via Ferratas SW/136/5 EN :2017 Railway Applications. The Specification and Demonstration of Reliability, Availability, Maintainability and Safety (RAMS). Generic RAMS Process GEL/9 EN :2017 Railway Applications. The Specification and Demonstration of Reliability, Availability, Maintainability and Safety (RAMS). Systems Approach to Safety GEL/9 EN 50385:2017 Product standard to demonstrate the compliance of base station equipment with radiofrequency electromagnetic field exposure limits (110 MHz-100 GHz), when placed on the market GEL/106 EN 50663:2017 Generic standard for assessment of low power electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (10 MHz-300GHz) GEL/106 CEN REPORTS CEN/TR :2017 Corrugated metal hose assemblies for pressure applications. Design method GSE/42 CEN TECHNICAL SPECIFICATIONS CEN/TS 15223:2017 Plastics piping systems. Validated design parameters of buried thermoplastics piping systems PRI/88 CEN/TS :2017 Electronic invoicing. Syntax binding for UN/CEFACT XML Industry Invoice D16B IST/47/-/2 CEN/TS 17118:2017 Intelligent transport systems. Public transport. Open API for distributed journey planning EPL/278 CENELEC PUBLICATIONS EUROPEAN RATIFIED TEXTS The documents listed below have recently been issued by CENELEC but have not yet been published as BS ENs. BSI has an obligation to adopt all ENs and to withdraw any conflicting British Standards (BSs) or parts of BSs. The following will be implemented as BS ENs or as amendments to BS ENs shortly. Notification of their implementation will be given in the BS EN Publications section of the relevant edition of Update Standards. EN : (IEC :2015/COR1:2017) Fixed capacitors for use in electronic equipment. Sectional specification: Fixed capacitors of ceramic dielectric, Class 1 CORRIGENDUM 1:September 2017 to EN :2015 EPL/40X EN : (IEC :2016/COR1:2017) Directly heated negative temperature coefficient thermistors. Generic specification CORRIGENDUM 1:September 2017 to EN :2016 EPL/40X EN :2017 (IEC :2017) Electroacoustics. Audiometric equipment. Equipment for pure-tone and speech audiometry EPL/29 EN :2017 (IEC :2017) Optical fibre cables. Indoor cables. Sectional specification GEL/86/1 EN : (IEC :2002/A1:2017) Electromagnetic compatibility (EMC). Environment. Compatibility levels for lowfrequency conducted disturbances and signalling in public low-voltage power supply systems AMENDMENT 1:October 2017 to EN :2002 GEL/210/11 EN :2017 (IEC :2017) Electromagnetic compatibility (EMC). Testing and measurement techniques. Ring wave immunity test GEL/210/11 EN 61184:2017 (IEC 61184:2017) Bayonet lampholders CPL/34/2 62 Prices may be subject to change. Update Standards December 2017

63 EN :2017 (IEC :2017) Printed board assemblies. Sectional specification. Requirements for terminal soldered assemblies EPL/501 EN :2017 (IEC :2016) Industrial communication networks. Profiles. Functional safety fieldbuses. Additional specifications for CPF 3 AMT/7 EN :2017 (IEC :2017) Electric vehicle conductive charging system. Electric vehicle on-board charger EMC requirements for conductive connection to an AC/DC supply PEL/69 EN :2017 (IEC :2017) Industrial-process measurement and control. Data structures and elements in process equipment catalogues. List of properties (LOPs) of valve/actuator accessories for electronic data exchange GEL/65/2 EN :2017 (IEC :2017) Industrial-process measurement and control. Data structures and elements in process equipment catalogues. Lists of properties (LOPs) of flow modification accessories for electronic data exchange GEL/65/2 EN :2017 (IEC :2017) Fuel cell technologies. Stationary fuel cell power systems. Performance test methods for small fuel cell power systems GEL/105 EN :2017 (IEC :2017) Industrial communication networks. Wireless communication networks. Wireless communication requirements and spectrum considerations AMT/7 EN :2017 (IEC :2017) Universal serial bus interfaces for data and power. Common components. USB Power Delivery specification EPL/100 EN 62927:2017 (IEC 62927:2017) Voltage sourced converter (VSC) valves for static synchronous compensator (STATCOM). Electrical Testing PEL/22 EN 62979:2017 (IEC 62979:2017) Photovoltaic module. Bypass diode. Thermal runaway test GEL/82 IEC PUBLICATIONS It is BSI policy to supply the UK version of all adopted standards, which are published as British standards, unless otherwise requested. The following IEC publications are available from BSI Customer Services (see How to order on page 2). IEC/TS :2017 Electroacoustics. Simulators of human head and ear. Head and torso simulator for the measurement of air-conduction hearing aids members, non-members EPL/29 IEC : Household and similar electrical appliances. Safety. Particular requirements for warming plates and similar appliances AMENDMENT 2:October 2017 to IEC : members, non-members CPL/61/7 IEC : Household and similar electrical appliances. Safety. Particular requirements for refrigerating appliances, ice-cream appliances and ice-makers AMENDMENT 2:April 2017 to IEC : members, non-members CPL/61 IEC :2017 Household and similar electrical appliances. Safety. Particular requirements for commercial electric doughnut fryers and deep fat fryers members, non-members CPL/61 IEC : Household and similar electrical appliances. Safety. Particular requirements for commercial electric multi-purpose cooking pans AMENDMENT 1:April 2017 to IEC : members, non-members CPL/61 IEC : Household and similar electrical appliances. Safety. Particular requirements for commercial electric forced convection ovens, steam cookers and steam-convection ovens AMENDMENT 2:April 2017 to IEC : members, non-members CPL/61 IEC :2017 Household and similar electrical appliances. Safety. Particular clothes dryers and towel rails members, non-members CPL/61/7 IEC : Household and similar electrical appliances. Safety. Particular requirements for commercial electric boiling pans AMENDMENT 2:April 2017 to IEC : members, non-members CPL/61 IEC : Household and similar electrical appliances. Safety. Particular requirements for commercial electric grillers and toasters AMENDMENT 2:April 2017 to IEC : members, non-members CPL/61 IEC : Household and similar electrical appliances. Safety. Particular requirements for commercial electric appliances for keeping food and crockery warm AMENDMENT 2:July 2017 to IEC : members, non-members CPL/61 IEC : Household and similar electrical appliances. Safety. Particular requirements for oral hygiene appliances AMENDMENT 2:October 2017 to IEC : members, non-members CPL/61/1 IEC :2017 Household and similar electrical appliances. Safety. Particular requirements for amusement machines and personal service machines members, non-members CPL/61/1 IEC : Household and similar electrical appliances. Safety. Particular requirements for drives for gates, doors and windows AMENDMENT 1:October 2017 to IEC : members, non-members CPL/61/1 IEC :2017 Low-voltage electrical installations. Requirements for special installations or locations. Electrical installations in caravans and motor caravans members, non-members JPEL/64 Update Standards December 2017 Prices may be subject to change. 63

64 IEC Publications continued... IEC : Medical electrical equipment. Particular requirements for the basic safety and essential performance of dental intra-oral X-ray equipment AMENDMENT 1:May 2017 to IEC : members, non-members CH/62/2 IEC :2017 Automatic electrical controls. Particular requirements for humidity sensing controls members, non-members CPL/72 IEC 60755:2017 General safety requirements for residual current operated protective devices members, non-members PEL/23/1 IEC 60809: Lamps for road vehicles. Dimensional, electrical and luminous requirements AMENDMENT 1:March 2017 to IEC 60809: members, non-members CPL/34/1 IEC :2017 Electromagnetic Compatibility (EMC). Testing and measurement techniques. Ring wave immunity test members, non-members GEL/210/11 IEC :2017 Global maritime distress and safety system (GMDSS). Digital selective calling (DSC) equipment. Operational and performance requirements methods of testing and required test results members, non-members EPL/80 IEC :2017 Electrical equipment for measurement; control and laboratory use. EMC requirements. Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety). General industrial applications members, non-members GEL/65/1 IEC :2017 Electrical equipment for measurement, control and laboratory use. EMC requirements. Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety). Industrial applications with specified electromagnetic environment members, non-members GEL/65/1 IEC : Lamp controlgear. Particular requirements for battery supplied electronic controlgear for emergency lighting (self-contained) AMENDMENT 1:October 2017 to IEC : members, non-members CPL/34/3 IEC :2017 Wind energy generation systems. Communications for monitoring and control of wind power plants. Overall description of principles and models members, non-members PEL/88 IEC/TS 62229:2017 Multimedia systems and equipment. Multimedia e-publishing and e-book. Conceptual model for multimedia e-publishing members, non-members EPL/100 IEC :2017 Heat shrinkable low and medium voltage moulded shapes. General requirements members, non-members GEL/15/5 IEC :2017 Heat shrinkable low and medium voltage moulded shapes. Methods of test members, non-members GEL/15/5 IEC/IEEE :2017 Determining the peak spatial-average specific absorption rate (SAR) in the human body from wireless communications devices, 30 MHz to 6 GHz. General requirements for using the finitedifference time-domain (FDTD) method for SAR calculations members, non-members GEL/106 IEC/IEEE :2017 Determining the peak spatial-average specific absorption rate (SAR) in the human body from wireless communications devices, 30 MHz to 6 GHz. Specific requirements for using the finite difference time domain (FDTD) method for SAR calculations of mobile phones members, non-members GEL/106 IEC :2017 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety. Particular requirements for transportable drain cleaners members, non-members CPL/116 IEC :2017 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety. Particular requirements for chain saws members, non-members CPL/116 IEC/TS 62950:2017 Household and similar electrical appliances. Specifying smart capabilities, of appliances and devices. General aspects members, non-members CPL/59 ISO PUBLICATIONS It is BSI policy to supply the UK version of all adopted standards, which are published as British standards, unless otherwise requested. The following ISO publications are available from BSI Customer Services (see How to order on page 2). ISO 105-B03:2017 Textiles. Tests for colour fastness. Colour fastness to weathering: Outdoor exposure members, non-members TCI/81 ISO 287:2017 Paper and board. Determination of moisture content of a lot. Oven-drying method members, non-members PAI/11 ISO 294-5:2017 Plastics. Injection moulding of test specimens of thermoplastic materials. Preparation of standard specimens for investigating anisotropy members, non-members PRI/82 ISO 505:2017 Conveyor belts. Method for the determination of the tear propagation resistance of textile conveyor belts members, non-members PRI/67 ISO 2143:2017 Anodizing of aluminium and its alloys. Estimation of loss of absorptive power of anodic oxidation coatings after sealing. Dyespot test with prior acid treatment members, non-members STI/33 ISO 2256: Dried mint (spearmint) (Mentha spicata Linnaeus syn. Mentha viridis Linnaeus). Specification AMENDMENT 1:October 2017 to ISO 2256: members, non-members AW/-/2 Will not be implemented as a British Standard 64 Prices may be subject to change. Update Standards December 2017

65 Exclusive to members - 50% discount on online access to standards British Standards Online A faster and easier way to work with standards British Standards Online (BSOL) is the online database, which will help you manage standards more cost-effectively by giving you instant access to the standards vital to your business success. Effective use of standards will enable you to improve efficiencies, reduce costs and win new business. BSOL can help you achieve this: More cost effective than purchasing individual standards Build a collection of standards relevant to your business Access all your standards, whenever and wherever you are BSOL gives you access to all the standards you need to improve the performance of your business: 84% of companies say that using standards enhances their reputation. #BSI8bn To claim your discount and start building your collection, call Get your no-obligation quote at bsigroup.com/usbsol Access over 90,000 British, adopted European and International standards and now over 500 IEC standards

66 ISO Publications continued... ISO :2017 Paints and varnishes. Determination of resistance to liquids. Immersion in liquids other than water members, non-members STI/10 ISO :2017 Paints and varnishes. Determination of resistance to liquids. Spotting methods members, non-members STI/10 ISO 3210:2017 Anodizing of aluminium and its alloys. Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in acid solution(s) members, non-members STI/33 ISO 3874:2017 Series 1 freight containers. Handling and securing members, non-members TW/1 ISO :2017 Earth-mover tyres and rims. Tyre designation and dimensions members, non-members AUE/4 ISO :2017 Agricultural machinery. Safety. Combine harvesters, forage harvesters, cotton harvesters and sugar cane harvesters members, non-members AGE/32 ISO :2017 Petroleum and related products. Precision of measurement methods and results. Determination of precision data in relation to methods of test members, non-members PTI/13 ISO :2017 Petroleum and related products. Precision of measurement methods and results. Interpretation and application of precision data in relation to methods of test members, non-members PTI/13 ISO :2017 Gas welding equipment. Safety devices. Devices incorporating a flame (flashback) arrestor members, non-members WEE/18 ISO :2017 Gas welding equipment. Safety devices. Devices not incorporating a flame (flashback) arrestor members, non-members WEE/18 ISO 5390: Compressors. Classification AMENDMENT 1:September 2017 to ISO 5390: members, non-members MCE/8/-/1 Will not be implemented as a British Standard ISO 6416:2017 Hydrometry. Measurement of discharge by the ultrasonic transit time (time of flight) method members, non-members CPI/113/1 ISO :2017 Metallic materials. Brinell hardness test. Verification and calibration of testing machines members, non-members ISE/101/5 ISO 6571: Spices, condiments and herbs. Determination of volatile oil content (hydrodistillation method) AMENDMENT 1:October 2017 to ISO 6571: members, non-members AW/-/2 ISO :2017 Buildings and civil engineering works. Vocabulary. General terms members, non-members CB/101/-/2 ISO 6283:2017 Refined nickel members, non-members I/- Will not be implemented as a British Standard ISO 7529:2017 Nickel alloys. Determination of chromium content. Potentiometric titration method with ammonium iron(ii) sulfate members, non-members I/- Will not be implemented as a British Standard ISO/TS :2017 Data quality. Data quality management: Overview members, non-members AMT/4 Will not be implemented as a British Standard ISO/TS :2017 Escalators and moving walks. Safety parameters meeting the GESRs members, non-members MHE/4 ISO/IEC/IEEE :2017 Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks. Specific requirements. High datarate wireless multimedia networks members, non-members IST/6 ISO/IEC/IEEE :2017 Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks. Specific requirements. Wireless body area network members, non-members IST/6 ISO/IEC/IEEE : Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks. Specific requirements. Cognitive Wireless RAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications: Policies and Procedures for Operation in the TV Bands AMENDMENT 2:October 2017 to ISO/IEC/IEEE : members, non-members IST/6 Will not be implemented as a British Standard ISO/IEC/IEEE : Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks. Specific requirements. Cognitive Wireless RAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications: Policies and Procedures for Operation in the TV Bands AMENDMENT 1:October 2017 to ISO/IEC/IEEE : members, non-members IST/6 Will not be implemented as a British Standard ISO :2017 Ergonomics of human-system interaction. Evaluation of tactile and haptic interactions members, non-members PH/9 ISO : Representation of results of particle size analysis. Characterization of a classification process AMENDMENT 1:October 2017 to ISO : members, non-members LBI/37 66 Prices may be subject to change. Update Standards December 2017

67 The European requirements standard on I&HAS has been amended BS EN :2006+A2:2017 Alarm systems Intrusion and hold-up systems Part 1: System requirements specifies requirements for I&HAS installed in buildings. The purpose of this standard is to give insurers, intruder alarm companies, customers and the police a complete and accurate specification of the supervision required in particular premises. The standard describes four security grades that categorise risk levels from low to high, depending on the type of premises, the value of the contents and the typical intruder or robber expected. Buy now shop.bsigroup.com/ a2 All alarm components meeting the requirements of the standard are assigned a security grade. The overall grade of a system is that of the lowest graded component within it. This enables manufacturers, installers, purchasers and procurers to make sure a system is fit for purpose and meets risk assessment criteria. Amendments to the standard include to normative references, definitions and abbreviations. To contact us visit shop.bsigroup.com/ a2 or contact Customer Services quoting marketing reference code US50131 T F orders@bsigroup.com shop.bsigroup.com Standards and publications may also be ordered via the BSI shop at shop.bsigroup.com *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call BSI British Standards Institution 2017

68 ISO Publications continued... ISO :2017 Financial services. Personal Identification Number (PIN) management and security. Basic principles and requirements for PINs in cardbased systems members, non-members IST/12 ISO :2017 Plastics. Acquisition and presentation of comparable single-point data. Moulding materials members, non-members PRI/21 ISO/IEEE : Health informatics. Point-of-care medical device communication. Nomenclature AMENDMENT 1:October 2017 to ISO/IEEE : members, non-members IST/35 ISO/IEEE :2017 Health informatics. Personal health device communication. Device specialization. Urine analyser members, non-members IST/35 Will not be implemented as a British Standard ISO :2017 Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. Almandite garnet members, non-members STI/21 ISO 11295:2017 Classification and information on design and applications of plastics piping systems used for renovation and replacement members, non-members PRI/88/3 ISO :2017 Gas cylinders. 17E and 25E taper threads for connection of valves to gas cylinders. Inspection gauges members, non-members PVE/3/1 ISO 11508:2017 Soil quality. Determination of particle density members, non-members EH/4 ISO 11615:2017 Health informatics. Identification of medicinal products. Data elements and structures for the unique identification and exchange of regulated medicinal product information members, non-members IST/35 ISO 11616:2017 Health informatics. Identification of medicinal products. Data elements and structures for unique identification and exchange of regulated pharmaceutical product information members, non-members IST/35 ISO/TS 11686:2017 Connectors for fluid power and general use. Assembly instructions for connectors with adjustable stud ends and O-ring sealing members, non-members MCE/18/-/4 ISO 11746: Rice. Determination of biometric characteristics of kernels AMENDMENT 1:October 2017 to ISO 11746: members, non-members AW/4 ISO 11747: Rice. Determination of rice kernel resistance to extrusion after cooking AMENDMENT 1:October 2017 to ISO 11747: members, non-members AW/4 ISO/IEC TR :2017 Information technology. Generic cabling for customer premises. Assessment and mitigation of installed balanced cabling channels to support 2,5GBASE-T and 5GBASE-T members, non-members TCT/7 Will not be implemented as a British Standard ISO 12473:2017 General principles of cathodic protection in seawater members, non-members GEL/603 Will not be implemented as a British Standard ISO :2017 Physical and mechanical properties of wood. Test methods for small clear wood specimens. Determination of impact bending strength members, non-members B/543 ISO :2017 Physical and mechanical properties of wood. Test methods for small clear wood specimens. Determination of resistance to impact indentation members, non-members B/543 Will not be implemented as a British Standard ISO :2017 Physical and mechanical properties of wood. Test methods for small clear wood specimens. Determination of static hardness members, non-members B/543 Will not be implemented as a British Standard ISO :2017 Physical and mechanical properties of wood. Test methods for small clear wood specimens. Determination of ultimate stress in compression parallel to grain members, non-members B/543 Will not be implemented as a British Standard ISO 13854:2017 Safety of machinery. Minimum gaps to avoid crushing of parts of the human body members, non-members MCE/3 ISO 13887:2017 Steel sheet, cold-reduced, of higher yield strength with improved formability members, non-members ISE/109 ISO 13916:2017 Welding. Measurement of preheating temperature, interpass temperature and preheat maintenance temperature members, non-members WEE/-/1 ISO :2017 Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment. Decision rules for verifying conformity or nonconformity with specifications members, non-members TDW/4 ISO 14457:2017 Dentistry. Handpieces and motors members, non-members CH/106/4 68 Prices may be subject to change. Update Standards December 2017

69 ISO/IEC : Information technology. Coding of audio-visual objects. Animation Framework extension (AFX) AMENDMENT 4:November 2017 to ISO/IEC : members, non-members IST/37 Will not be implemented as a British Standard ISO :2017 Cleanrooms and associated controlled environments. Assessment of suitability for use of equipment and materials by airborne chemical concentration members, non-members LBI/30 ISO 14889: Ophthalmic optics. Spectacle lenses. Fundamental requirements for uncut finished lenses AMENDMENT 1:October 2017 to ISO 14889: members, non-members CH/172/3 ISO :2017 Machine tools. Environmental evaluation of machine tools. Design methodology for energyefficient machine tools members, non-members MTE/1 ISO 15296:2017 Gas welding equipment. Vocabulary members, non-members WEE/18 ISO 15394:2017 Packaging. Bar code and two-dimensional symbols for shipping, transport and receiving labels members, non-members PKW/0 ISO 15798: Ophthalmic implants. Ophthalmic viscosurgical devices AMENDMENT 1:May 2017 to ISO 15798: members, non-members CH/172/7 ISO 16084:2017 Balancing of rotating tools and tool systems members, non-members MTE/18 ISO : Acoustics. Field measurement of sound insulation in buildings and of building elements. Airborne sound insulation AMENDMENT 1:October 2017 to ISO : members, non-members EH/1/6 ISO :2017 Non-destructive testing. Industrial computed radiography with storage phosphor imaging plates. General principles for testing of metallic materials using X-rays and gamma rays members, non-members WEE/46 ISO :2017 Electronic fee collection. Evaluation of equipment for conformity to ISO Test suite structure and test purposes members, non-members EPL/278 ISO :2017 Electronic fee collection. Evaluation of equipment for conformity to ISO Test suite structure and test purposes members, non-members EPL/278 ISO 17640:2017 Non-destructive testing of welds. Ultrasonic testing. Techniques, testing levels, and assessment members, non-members WEE/46 ISO 17664:2017 Processing of health care products. Information to be provided by the medical device manufacturer for the processing of medical devices. Devices that require cleaning followed by disinfection and/or sterilization members, non-members CH/198 ISO 17836:2017 Thermal spraying. Determination of the deposition efficiency for thermal spraying members, non-members STI/40 ISO/IEC :2017 Information technology. Scalable compression and coding of continuous-tone still images. Conformance testing members, non-members IST/37 Will not be implemented as a British Standard ISO :2017 Geotechnical investigation and testing. Geotechnical monitoring by field instrumentation. Measurement of displacements across a line. Inclinometers members, non-members B/526/3 ISO :2017 Woodworking machines. Safety requirements. Numerically controlled (NC) boring and routing machines members, non-members MTE/23 ISO :2017 Woodworking machines. Safety. Single spindle vertical moulding machines ( toupies ) members, non-members MTE/23 ISO :2017 Addressing. International postal address components and template language members, non-members IST/36 ISO/IEC TS 19249:2017 Information technology. Security techniques. Catalogue of architectural and design principles for secure products, systems and applications members, non-members IST/33/3 ISO 19340:2017 Water quality. Determination of dissolved perchlorate. Method using ion chromatography (IC) members, non-members EH/3/2 ISO/TR 19669:2017 Health informatics. Re-usable component strategy for use case development members, non-members IST/35 ISO 19918:2017 Protective clothing. Protection against chemicals. Measurement of cumulative permeation of chemicals with low vapour pressure through materials members, non-members PH/3/3 ISO 20108:2017 Simultaneous interpreting. Quality and transmission of sound and image input. Requirements members, non-members TS/1 Update Standards December 2017 Prices may be subject to change. 69

70 ISO Publications continued... ISO/TS 20443:2017 Health informatics. Identification of medicinal products. Implementation guidelines for ISO data elements and structures for the unique identification and exchange of regulated medicinal product information members, non-members IST/35 ISO/TS 20451:2017 Medicinal products. Implementation guide for ISO data elements and structures for the unique identification and exchange of regulated pharmaceutical product information members, non-members IST/35 ISO :2017 Stationary training equipment. Steppers, stair climbers and climbers. Additional specific safety requirements and test methods members, non-members SW/136/4 ISO :2017 Stationary training equipment. Exercise bicycles with a fixed wheel or without freewheel. Additional specific safety requirements and test methods members, non-members SW/136/4 ISO/TR 21865:2017 Fireworks. Third party testing. Voluntary scheme members, non-members CII/47 Will not be implemented as a British Standard ISO :2017 Plastics. Determination of thermal conductivity and thermal diffusivity. General principles members, non-members PRI/21 ISO :2017 Geotechnical investigation and testing. Field testing. Weight sounding test members, non-members B/526/3 ISO 22825:2017 Non-destructive testing of welds. Ultrasonic testing. Testing of welds in austenitic steels and nickel-based alloys members, non-members WEE/2 ISO/IEC TR :2017 Information technology. MPEG video technologies. Tools for reconfigurable media coding implementations members, non-members IST/37 Will not be implemented as a British Standard ISO/IEC : Information technology. MPEG audio technologies. Dynamic Range Control AMENDMENT 2:October 2017 to ISO/IEC : members, non-members IST/37 Will not be implemented as a British Standard ISO/IEC : Information technology. High efficiency coding and media delivery in heterogeneous environments. MPEG media transport (MMT) AMENDMENT 1:September 2017 to ISO/IEC : members, non-members IST/37 Will not be implemented as a British Standard ISO/IEC :2017 Information technology. High efficiency coding and media delivery in heterogeneous environments. High efficiency video coding members, non-members IST/37 Will not be implemented as a British Standard ISO/IEC :2017 Information technology. Dynamic adaptive streaming over HTTP (DASH). Conformance and reference software members, non-members IST/37 Will not be implemented as a British Standard ISO 25110:2017 Electronic fee collection. Interface definition for on-board account using integrated circuit card (ICC) members, non-members EPL/278 ISO/IEC/IEEE 26513:2017 Systems and software engineering. Requirements for testers and reviewers of information for users members, non-members IST/15 ISO/IEC 27019:2017 Information technology. Security techniques. Information security controls for the energy utility industry members, non-members IST/33/1 ISO 28591:2017 Sequential sampling plans for inspection by attributes members, non-members SS/5 ISO 28592:2017 Double sampling plans by attributes with minimal sample sizes, indexed by producer s risk quality (PRQ) and consumer s risk quality (CRQ) members, non-members SS/5 ISO/IEC TS 29125:2017 Information technology. Telecommunications cabling requirements for remote powering of terminal equipment members, non-members TCT/7 Will not be implemented as a British Standard ISO/IEC TR :2017 Information technology. Advanced image coding and evaluation. Guidelines for image coding system evaluation members, non-members IST/37 Will not be implemented as a British Standard ISO/IEC : Information technology. JPEG XR image coding system. Image coding specification AMENDMENT 1:September 2017 to ISO/IEC : members, non-members IST/37 Will not be implemented as a British Standard ISO/IEC :2017 Information technology. Data centres. Key performance indicators. IT Equipment Energy Efficiency for servers (ITEEsv) members, non-members IST/46 Will not be implemented as a British Standard ISO/IEC :2017 Information technology. Data centres. Key performance indicators. IT Equipment Utilization for servers (ITEUsv) members, non-members IST/46 Will not be implemented as a British Standard ISO/IEC TS 33073:2017 Information technology. Process assessment. Process capability assessment model for quality management members, non-members IST/15 70 Prices may be subject to change. Update Standards December 2017

71 Become a BSI Distributor We have over 200 authorized distributors that are an essential part of our global distributor network who are selling our products to their customer base. With over 37,000 standards and publications covering a wide range of sectors, our distributors can choose to specialize in their specific sectors, such as fire safety and security, or cover the wider market and offer the complete range of BSI products. What do you get by becoming a BSI distributor? Healthy discounts available to assist you in generating revenue from sales. Becoming a BSI distributor enables you and your organization to use the BSI brand to enhance customer engagement. Regular standard updates and specialist newsletters that you wish to purchase, for the purpose of resale and/or distribution to your customer and membership base. You can purchase BS, BS EN, BS EN ISO, BS ISO and PAS standards as well as books and other valuable content and publications. Get bulk orders of the standards, books and publications that your customers and members need at healthy, customized discounts. For more information visit: shop.bsigroup.com/distributors For more information on how to become a distributor, or to place an order: T F E distributor.sales@bsigroup.com Free help from our Knowledge Centre Let us take the hassle out of your standards and subject searches. We employ a team of information professionals, just for Members. They re dedicated to answering your questions on BSI standards and helping you with your standards-related queries. They will: Provide scope and content information on any standard Find standards through subject searches Give you expanded information on what a standard covers through keyword searches You can view full standards online or in printed format in our Members Reading Room in London. Our information and searches cover current and withdrawn British Standards as well as standards from over 200 standards organizations in 23 countries. Contact the Knowledge Centre today to find out how we can help you with your standards searches. This service is available exclusively for BSI Members. T F E knowledgecentre@bsigroup.com bsigroup.com/usknowledgecentre