British Standards - Quick Reference Guide

Transcription

1 British Standards - Quick Reference Guide The following British Standards are listed or referred to in this issue of Update Standards with the exception of those in New Work Started. Building and civil engineering BS BS , 22 BS BS BS BS DD CEN/TS DD CEN/TS DD CEN/TS DD CEN/TS BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN ISO BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN DD ENV DD ENV PD PAS , 24 Consumer products and services BS BS BS BS BS BS BS BS BS , 23 BS BS BS BS BS BS BS EN ISO BS EN ISO BS EN ISO BS EN BS EN ISO BS ISO , 23 BS ISO BS ISO BS ISO BS ISO BS ISO DD ISO/TS Electrotechnical BS BS BS BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN , 15, 23 BS EN BS EN BS EN BS EN BS EN BS IEC BS IEC BS IEC BS IEC BS IEC BS IEC BS IEC DD IEC/PAS DD IEC/PAS Engineering BS BS , 22 BS , 23 BS BS , 23 BS BS BS BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN ISO BS EN BS EN BS EN ISO BS EN ISO BS EN ISO BS EN , 23 BS EN ISO BS EN BS EN BS EN BS EN BS EN , 23 BS EN , 12 BS EN ISO BS EN BS EN BS EN ISO BS EN ISO , 23 BS EN ISO DD ENV , 23 BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO , 16 BS ISO BS ISO BS ISO BS ISO BS ISO , 23 BS ISO BS ISO BS ISO BS ISO , 23 BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO , 23 BS ISO BS ISO BS ISO BS ISO , 23 BS ISO , 23 BS ISO , 23 BS ISO , 23 BS IEC DD ISO/PAS , 23 DD ISO/PAS , 23 DD ISO/PAS , 23 DD ISO/PAS , 23 PD ISO/PAS , 23 PD ISO/TR BS 9F Prices may be subject to change. Update Standards Feb 2008

2 British Standards - Quick Reference Guide continued... BS 7F BS 7F BS 5F BS 6F BS 5F BS 6F BS 5F BS 2F BS 2F BS 2F BS F BS 2F BS 3F BS F BS 2F BS F BS 6SP BS SP Health and environment BS BS BS BS BS , 23 BS , 23 BS BS EN BS EN BS EN BS EN BS EN BS EN ISO BS EN ISO BS EN ISO BS EN BS EN BS EN ISO BS EN , 23 BS EN BS EN BS ISO , 23 BS ISO , 23 BS ISO BS ISO BS ISO BS ISO Information systems BS , 23 BS BS , 23 BS EN BS EN BS ISO/IEC PD ISO/IEC TR Management systems PD ISO/TR Materials and chemicals BS BS DD CEN/TS , 23 DD CEN/TS DD CEN/TS , 23 BS EN ISO BS EN , 23 BS EN BS EN , 23 BS EN BS EN ISO BS EN ISO BS EN ISO BS EN BS EN BS EN BS EN BS EN BS EN BS EN ISO BS EN ISO BS EN BS EN BS EN BS EN BS EN ISO , 23 BS EN ISO BS EN ISO DD ENV ISO DD ENV , 23 BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO DD ISO/TR Alpha-numeric sequence of British Standards quoted in this issue BS BS BS BS , 22 BS BS , 22 BS BS BS BS BS BS BS BS BS BS BS BS BS BS , 23 BS BS BS BS BS , 23 BS , 23 BS BS BS BS BS , 23 BS BS BS BS BS , 23 BS BS BS BS BS BS BS BS , 23 BIP BIP BIP BIP DD CEN/TS , 23 DD CEN/TS DD CEN/TS DD CEN/TS DD CEN/TS , 23 DD CEN/TS DD CEN/TS BS EN BS EN ISO BS EN BS EN BS EN ISO BS EN BS EN BS EN , 23 BS EN BS EN , 23 BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN ISO BS EN BS EN BS EN BS EN BS EN BS EN ISO BS EN BS EN BS EN BS EN ISO Update Standards Feb 2008 Prices may be subject to change. 5

3 Alpha-numeric sequence of British Standards continued... BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN BS EN BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN BS EN , 23 BS EN BS EN ISO BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN , 23 BS EN , 12 BS EN BS EN ISO BS EN , 23 BS EN BS EN BS EN ISO BS EN ISO BS EN BS EN ISO BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN ISO , 23 BS EN ISO BS EN ISO BS EN ISO BS EN ISO , 23 BS EN ISO BS EN ISO BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN , 15, 23 BS EN BS EN BS EN BS EN BS EN DD ENV ISO DD ENV , 23 DD ENV DD ENV , 23 DD ENV BS ISO BS ISO BS ISO BS ISO BS ISO , 23 BS ISO BS ISO BS ISO , 16 BS ISO BS ISO BS ISO BS ISO BS ISO , 23 BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO , 23 BS ISO BS ISO BS ISO , 23 BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO/IEC BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO , 23 BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO , 23 BS ISO , 23 BS ISO , 23 BS ISO , 23 BS ISO BS IEC BS IEC BS IEC BS IEC BS IEC BS IEC BS IEC BS IEC DD ISO/PAS , 23 DD ISO/PAS , 23 DD ISO/PAS , 23 DD ISO/PAS , 23 DD ISO/TR DD ISO/TS DD IEC/PAS DD IEC/PAS PD PD ISO/PAS , 23 PD ISO/TR PD ISO/TR PD ISO/IEC TR BS 9F BS 7F BS 7F BS 5F BS 6F BS 5F BS 6F BS 5F BS 2F BS 2F BS 2F BS F BS 2F BS 3F BS F BS 2F BS F BS 6SP BS SP PAS , 24 6 Prices may be subject to change. Update Standards Feb 2008

4 British Standards BRITISH STANDARDS The following British Standard publications are available from BSI Customer Services (see How to order on page 2). The publications listed below are new and revised British Standards that were made available last month. An existing BSI publication bearing a number identical to one announced below is automatically withdrawn unless stated otherwise. In all other cases of supersession, details are given and a corresponding entry appears in the British Standards withdrawn section. BRITISH STANDARD IMPLEMENTATIONS WILL BE SUPPLIED IN PREFERENCE TO EUROPEAN OR INTERNATIONAL STANDARDS, UNLESS OTHERWISE REQUESTED. Please order by the British Standard reference not the ISBN number. BS 2000 series standards are also available from: Library of the Energy Institute 61 New Cavendish Street London W1G 7AR Tel: Fax: lis@energyinst.org.uk For this series, member pricing is applicable to BSI and Energy Institute members. BS 1192:2007 Collaborative production of architectural, engineering and construction information. Code of practice supersedes BS :1998 ISBN members, non-members B/555 BS 1580: Unified screw threads BS :2007 Screw threads with diameters 1 4 in and larger. Requirements supersedes BS 1580:Parts 1 and 2:1962 ISBN members, non-members FME/9 BS :2007 Screw threads with diameters below 1 4 in. Requirements supersedes BS :1965 ISBN FME/9 BS 6297:2007 Code of practice for the design and installation of drainage fields for use in wastewater treatment supersedes BS 6297:1983 ISBN members, non-members B/505 BS 6400: Specification for installation, exchange, relocation and removal of gas meters with a maximum capacity not exceeding 6 m/h BS :2007 Low and medium pressure (3rd family gases) ISBN members, non-members GSE/30 BS 7882:2008 Method for calibration and classification of torque measuring devices supersedes BS 7882:1997 ISBN ISE/NFE/4/1 BS 7907:2007 Code of practice for the design and manufacture of children s clothing to promote mechanical safety supersedes BS 7907:1997 ISBN members, non-members TCI/66 BS 8491:2008 Method for assessment of fire integrity of large diameter power cables for use as components for smoke and heat control systems and certain other active fire safety systems ISBN GEL/20/18 BS 8723: Structured vocabularies for information retrieval. Guide BS :2007 Vocabularies other than thesauri ISBN members, non-members IDT/2/2 BS :2007 Interoperability between vocabularies supersedes BS 6723:1985 ISBN members, non-members IDT/2/2 BS EN PUBLICATIONS The following are British Standard implementations of the English language versions of European Standards (ENs). BSI has an obligation to publish all ENs and to withdraw any conflicting British Standards. This has led to a series of standards, BS ENs, using the EN number. Note: The date referenced in the identifier is the date of the European standard. BS EN 88: Pressure regulators and associated safety devices for gas appliances BS EN 88-1:2007 Pressure regulators for inlet pressures up to and including 500 mbar supersedes BS EN 88:1991 ISBN GSE/22/19 BS EN 88-2:2007 Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar ISBN members, non-members GSE/22/19 BS EN ISO 216:2007 Writing paper and certain classes of printed matter. Trimmed sizes. A and B series, and indication of machine direction supersedes BS EN ISO 216:2001 ISBN PAI/11 BS EN 993: Methods of test for dense shaped refractory products BS EN :2007 Determination of resistance to thermal shock supersedes DD CEN/TS :2003 ISBN RPI/1 BS EN 1007: Advanced technical ceramic. Ceramic composites. Methods of test for reinforcements BS EN :2007 Determination of tensile properties of filaments at high temperature ISBN RPI/13 8 Prices may be subject to change. Update Standards Feb 2008

5 BS EN Publications continued... BS EN 1071: Advanced technical ceramics. Methods of test for ceramic coatings BS EN :2007 Determination of the abrasion resistance of coatings by a micro-abrasion wear test supersedes DD ENV :2002 ISBN RPI/13 BS EN 1348:2007 Adhesives for tiles. Determination of tensile adhesion strength for cementitious adhesives supersedes BS EN 1348:1999 ISBN B/539 BS EN 3375: Aerospace series. Cable, electrical, for digital data transmission BS EN 4604: Aerospace series. Cable, electrical, for signal transmission BS EN :2007 Cable, microcoaxial, high immunity, 50 Ohms, 200 C, type WS. Product standard ISBN ACE/6/-/2 BS EN 1124: Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems BS EN :2007 System S; dimensions supersedes BS EN :1999 ISBN ISE/8 BS EN :2007 Double braid. 77 Ohms. Type WJ. Product standard ISBN ACE/6/-/2 BS EN 3475: Aerospace series. Cables, electrical, aircraft use. Test methods BS EN ISO 5398: Leather. Chemical determination of chromic oxide content BS EN ISO :2007 Quantification by titration ISBN TCI/69 BS EN 1308:2007 Adhesives for tiles. Determination of slip ISBN B/539 BS EN 1323:2007 Adhesives for tiles. Concrete slabs for tests supersedes BS EN 1323:1999 ISBN B/539 BS EN 1324:2007 Adhesives for tiles. Determination of shear adhesion strength of dispersion adhesives supersedes BS EN 1324:1999 ISBN B/539 BS EN 1346:2007 Adhesives for tiles. Determination of open time supersedes BS EN 1346:1999 ISBN B/539 BS EN :2007 Thermal endurance for conductors ISBN ACE/6/-/2 BS EN :2007 Resistance to wet arc tracking supersedes BS EN :2002 ISBN ACE/6/-/2 BS EN 3909:2007 Aerospace series. Test fluids and test methods for electric components and sub-assemblies ISBN ACE/6/-/3 BS EN 4008: Aerospace series. Elements of electrical and optical connection. Crimping tool and associated accessories BS EN ISO :2007 Quantification by atomic absorption spectrometry ISBN TCI/69 BS EN ISO :2007 Quantification by inductive coupled plasmaoptical emission spectrometer (ICP-OES) ISBN TCI/69 BS EN ISO 6360: Dentistry. Number coding system for rotary instruments BS EN ISO :2007 Specific characteristics of root-canal instruments ISBN CH/106/4 BS EN 1347:2007 Adhesives for tiles. Determination of wetting capability supersedes BS EN 1347:1999 ISBN B/539 BS EN :2007 Positioner for crimping tool M22520/2-01. Product standard ISBN ACE/6/-/3 BS EN ISO 8307:2007 Flexible cellular polymeric materials. Determination of resilience by ball rebound supersedes BS EN ISO 8307:1998 ISBN PRI/24 10 Prices may be subject to change. Update Standards Feb 2008

6 BS EN ISO 8835: Inhalational anaesthesia systems BS EN ISO :2007 Anaesthetic breathing systems supersedes BS EN 740:1999 which remains current ISBN members, non-members CH/121/1 BS EN 10028: Flat products made of steels for pressure purposes BS EN :2007 General requirements supersedes BS EN :2000 ISBN ISE/73/2 BS EN :2007 Stainless steels supersedes BS EN :2000 ISBN members, non-members ISE/30 BS EN 10273:2007 Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties supersedes BS EN 10273:2000 ISBN ISE/73/2 BS EN ISO 10424: Petroleum and natural gas industries. Rotary drilling equipment BS EN ISO :2007 Threading and gauging of rotary shouldered thread connections ISBN members, non-members PSE/17/-/4 BS EN ISO 10440: Petroleum, petrochemical and natural gas industries. Rotary-type positive-displacement compressors BS EN ISO :2007 Process compressors supersedes BS EN ISO :2001 ISBN members, non-members MCE/8 BS EN ISO 10993: Biological evaluation of medical devices BS EN ISO :2007 Sample preparation and reference materials supersedes BS EN ISO :2004 ISBN CH/194 BS EN 12004:2007 Adhesives for tiles. Requirements, evaluation of conformity, classification and designation supersedes BS EN 12004:2001 ISBN B/539 BS EN 12151:2007 Machinery and plants for the preparation of concrete and mortar. Safety requirements ISBN members, non-members B/513/-/8 BS EN 12566: Small wastewater treatment systems for up to 50 PT BS EN :2007 Septic tanks assembled in situ from prefabricated kits ISBN B/505 BS EN 12767:2007 Passive safety of support structures for road equipment. Requirements, classification and test methods supersedes BS EN 12767:2000 ISBN members, non-members B/509/10 BS EN 13501: Fire classification of construction products and building elements BS EN :2007 Classification using data from fire resistance tests, excluding ventilation services supersedes BS EN :2003 ISBN members, non-members FSH/22 BS EN 13611:2007 Safety and control devices for gas burners and gas burning appliances. General requirements supersedes BS EN 13611:2000 ISBN members, non-members GSE/22 BS EN 13831:2007 Closed expansion vessels with built in diaphragm for installation in water ISBN members, non-members RHE/7 BS EN 13915:2007 Prefabricated gypsum plasterboard panels with a cellular paperboard core. Definitions, requirements and test methods ISBN members, non-members B/544/2 BS EN 14123:2007 Foodstuffs. Determination of aflatoxin B1 and the sum of aflatoxin B1, B2, G1 and G2 in hazelnuts, peanuts, pistachios, figs, and paprika powder. High performance liquid chromatographic method with post-column derivatisation and immunoaffinity column cleanup supersedes BS EN 14123:2003 ISBN AW/-/3 BS EN 14389: Road traffic noise reducing devices. Procedures for assessing long term performance BS EN :2007 Acoustical characteristics ISBN B/509/6 BS EN 14459:2007 Control functions in electronic systems for gas burners and gas burning appliances. Methods for classification and assessment supersedes DD ENV 1954:1997 ISBN members, non-members GSE/22 BS EN 14511: Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling BS EN :2007 Terms and definitions supersedes BS EN :2004 ISBN RHE/17 BS EN :2007 Test conditions supersedes BS EN :2004 ISBN RHE/17 Update Standards Feb 2008 Prices may be subject to change. 11

7 BS EN Publications continued... BS EN :2007 Test methods supersedes BS EN :2004 ISBN members, non-members RHE/17 BS EN :2007 Requirements supersedes BS EN :2004 ISBN RHE/17 BS EN 14682:2007 Safety of children s clothing. Cords and drawstrings on children s clothing. Specifications supersedes BS EN 14682:2004 ISBN TCI/66 BS EN ISO 14801:2007 Dentistry. Implants. Dynamic fatigue test for endosseous dental implants supersedes BS EN ISO 14801:2003 ISBN CH/106/8 BS EN 14891:2007 Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives. Requirements, test methods, evaluation of conformity, classification and designation ISBN B/539 BS EN 14944: Influence of cementitious products on water intended for human consumption. Test methods BS EN :2007 Migration of substances from factory-made cementitious products ISBN members, non-members EH/6 BS EN ISO 15015:2007 Plastics. Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA). Requirements and test methods ISBN PRI/75 BS EN 15027:2007 Transportable wall saw and wire saw equipment for job site. Safety ISBN members, non-members B/513/-/6 BS EN ISO 15138:2007 Petroleum and natural gas industries. Offshore production installations. Heating, ventilation and air-conditioning supersedes BS EN ISO 15138:2001 ISBN members, non-members PSE/17/-/6 BS EN 15416: Adhesives for load bearing timber structures. Test methods BS EN :2007 Creep deformation test at cyclic climate conditions with specimens loaded in bending shear ISBN PRI/52 BS EN 15459:2007 Energy performance of buildings. Economic evaluation procedure for energy systems in buildings ISBN members, non-members RHE/24 BS EN 15469:2007 Petroleum products. Test method for free water in liquefied petroleum gas by visual inspection ISBN PTI/15 BS EN 15471:2007 Liquefied petroleum gases. Determination of dissolved residues. High-temperature gravimetric method ISBN PTI/15 BS EN 15495:2007 Non-destructive testing. Acoustic emission. Examination of metallic pressure equipment during proof testing. Zone location of AE sources ISBN WEE/46 BS EN 15521:2007 Health informatics. Categorial structure for terminologies of human anatomy ISBN IST/35 BS EN ISO 17075:2007 Leather. Chemical tests. Determination of chromium(vi) content supersedes DD CEN/TS 14495:2003 ISBN TCI/69 BS EN ISO 21952:2007 Welding consumables. Wire electrodes, wires, rods and deposits for gas-shielded arc welding of creep-resisting steel. Classification supersedes BS EN 12070:2000 ISBN WEE/39 BS EN ISO 22435:2007 Gas cylinders. Cylinder valves with integrated pressure regulators. Specification and type testing ISBN members, non-members PVE/3/1 BS EN ISO 15013:2007 Plastics. Extruded sheets of polypropylene (PP). Requirements and test methods supersedes BS EN ISO 15013:1999 ISBN PRI/75 BS EN 15470:2007 Liquefied petroleum gases. Determination of dissolved residues. High temperature gas chromatographic method ISBN PTI/15 BS EN ISO 26082:2007 Leather. Physical and mechanical tests. Determination of soiling with rubbing for automotive leather ISBN TCI/69 12 Prices may be subject to change. Update Standards Feb 2008

8 BS EN Publications continued... BS EN 50173: Information technology. Generic cabling systems BS EN :2007 Industrial premises ISBN members, non-members TCT/7 BS EN 50463:2007 Railway applications. Energy measurement on board trains ISBN members, non-members GEL/9 BS EN 50494:2007 Satellite signal distribution over a single coaxial cable in single dwelling installations ISBN members, non-members EPL/100 BS EN 50497:2007 Recommended test method for assessment of the risk of plasticizer exudation from PVC insulated and sheathed cables ISBN GEL/20/17 BS EN 60191: Mechanical standardization of semiconductor devices BS EN :2007 Design guideline of open-top-type sockets for fine-pitch ball grid array and fine-pitch land grid array (FBGA/FLGA) ISBN EPL/47 BS EN 60423:2007 Conduit systems for cable management. Outside diameters of conduits for electrical installations and threads for conduits and fittings supersedes BS EN 60423:1995 ISBN PEL/213 your order orders@bsigroup.com BS EN 60664: Insulation coordination for equipment within low-voltage systems BS EN :2007 Comprehensive method for determining clearances and creepage distances equal to or less than 2 mm supersedes BS EN :2003 ISBN members, non-members GEL/109 BS EN 61023:2007 Maritime navigation and radiocommunication equipment and systems. Marine speed and distance measuring equipment (SDME). Performance requirements, methods of testing and required test results supersedes BS EN 61023:2000 ISBN EPL/80 BS EN 61076: Connectors for electronic equipment. Product requirements BS EN :2006 Cable outlet accessories. Detail specification for a metric cable sealing consisting of an integrated part of heavy-duty rectangular or circular connector hoods and a sealing system ISBN EPL/48 BS EN 61157:2007 Standard means for the reporting of the acoustic output of medical diagnostic ultrasonic equipment supersedes BS EN 61157:1995 ISBN members, non-members EPL/87 BS EN 61188: Printed boards and printed board assemblies. Design and use BS EN : Attachment (land/joint) considerations BS EN :2007 Components with gull-wing leads on two sides ISBN EPL/501 BS EN :2007 Components with J leads on two sides ISBN EPL/501 BS EN :2007 Components with gull-wing leads on four sides ISBN members, non-members EPL/501 BS EN 61193: Quality assessment systems BS EN :2007 Selection and use of sampling plans for inspection of electronic components and packages ISBN EPL/501 BS EN 61557: Electrical safety in low voltage distribution systems up to V A.C. and V D.C.. Equipment for testing, measuring or monitoring of protective measures BS EN :2007 Effectiveness of residual current devices (RCD) in TT, TN and IT systems supersedes BS EN :1998 which remains current ISBN PEL/85 BS EN 61558: Safety of power transformers, power supplies, reactors and similar products BS EN :2007 Particular requirements and tests for transformers and power supplies for toys supersedes BS EN :1998 ISBN PEL/96 BS EN 61689:2007 Ultrasonics. Physiotherapy systems. Field specifications and methods of measurement in the frequency range 0,5 MHz to 5 MHz supersedes BS EN 61689:1997 ISBN members, non-members EPL/87 BS EN 61753: Fibre optic interconnecting devices and passive components performance standard BS EN :2007 General and guidance for performance standards supersedes BS EN :2001 ISBN members, non-members GEL/86/2 14 Prices may be subject to change. Update Standards Feb 2008

9 BS EN :2007 Non-connectorized single-mode circulators for category O. Uncontrolled environment and sequential test ISBN GEL/86/2 BS EN 61850: Communication networks and systems for power utility automation BS EN :2007 Hydroelectric power plants. Communication for monitoring and control ISBN members, non-members PEL/57 BS EN 61937: Digital audio. Interface for non-linear PCM encoded audio bitstreams applying IEC BS EN :2007 Non-linear PCM bitstreams according to the MAT format ISBN EPL/100 BS EN 62379: Common control interface for networked digital audio and video products BS EN :2007 General ISBN members, non-members EPL/100 BS EN 62421:2007 Electronics assembly technology. Electronic modules ISBN EPL/501 NA to BS EN 1992: UK National Annex to Eurocode 2. Design of concrete structures NA to BS EN 1994: UK National Annex to Eurocode 4. Design of composite steel and concrete structures NA to BS EN :2005 General rules and rules for bridges ISBN B/525/4 BS ENs IMPLEMENTED BY AMENDMENT For the standards listed below see also the Amendments to British Standards and Updated British Standards sections of this issue of Update Standards. BS EN ISO 10405:2006 Petroleum and natural gas industries. Care and use of casing and tubing PSE/17 Implementation of European Standard EN ISO by amendment to BS ISO 10405:2000. BS EN ISO 21183: Light conveyor belts BS EN ISO :2006 List of equivalent terms PRI/67 Implementation of European Standard EN ISO by amendment to BS ISO :2005. BS IMPLEMENTATIONS BS Implementations comprise the ISO or IEC text without any national deviation and with front and back cover indicating the UK committee responsible. No other information will normally be added. Note: The date referenced in the identifier is the date of the international standard. BS ISO 702: Machine tools. Connecting dimensions of spindle noses and work holding chucks BS ISO 702-3:2007 Bayonet type ISBN BS ISO 2490:2007 Solid (monobloc) gear hobs with tenon drive or axial keyway, 0,5 to 40 module. Nominal dimensions ISBN MCE/5/-/3 BS ISO 3271:2007 Iron ores for blast furnace and direct reduction feedstocks. Determination of the tumble and abrasion indices supersedes BS ISO 3271:1995 ISBN ISE/58 BS ISO 4226:2007 Air quality. General aspects. Units of measurement supersedes BS :1994 ISBN EH/2/4 BS ISO 4252:2007 Agricultural tractors. Operator s workplace, access and exit. Dimensions ISBN AGE/6 BS ISO 4695:2007 Iron ores for blast furnace feedstocks. Determination of the reducibility by the rate of reduction index supersedes BS ISO 4695:1995 ISBN ISE/58 BS ISO 4696: Iron ores for blast furnace feedstocks. Determination of low-temperature reductiondisintegration indices by static method NA to BS EN :2005 Concrete bridges. Design and detailing rules ISBN B/525/2 BS ISO 702-2:2007 Camlock type ISBN BS ISO :2007 Reduction with CO, CO 2, H 2 and N 2 ISBN ISE/58 Update Standards Feb 2008 Prices may be subject to change. 15

10 BS Implementations continued... BS ISO :2007 Reduction with CO and N 2 ISBN ISE/58 BS ISO 4698:2007 Iron ore pellets for blast furnace feedstocks. Determination of the free-swelling index supersedes BS ISO 4698:1994 ISBN ISE/58 BS ISO 4960:2007 Cold-reduced carbon steel strip with a mass fraction of carbon over 0,25 % ISBN ISE/10 BS ISO 5415:2007 Reduction sleeves with 7/24 external and Morse internal taper and incorporated screw ISBN MTE/5 BS ISO 5954:2007 Cold-reduced carbon steel sheet according to hardness requirements ISBN ISE/10 BS ISO 6621: Internal combustion engines. Piston rings BS ISO :2007 Vocabulary supersedes BS :1992 ISBN members, non-members MCE/14/-/10 BS ISO 7215:2007 Iron ores for blast furnace feedstocks. Determination of the reducibility by the final degree of reduction index supersedes BS ISO 7215:1995 ISBN ISE/58 BS ISO 7992:2007 Iron ores for blast furnace feedstocks. Determination of reduction under load supersedes BS ISO 7992:1992 ISBN ISE/58 BS ISO 8188:2007 Textile machinery and accessories. Pitches of knitting machines ISBN TCI/33 BS ISO 8371:2007 Iron ores for blast furnace feedstocks. Determination of the decrepitation index supersedes BS ISO 8371:1994 ISBN ISE/58 BS ISO 9587:2007 Metallic and other inorganic coatings. Pretreatment of iron or steel to reduce the risk of hydrogen embrittlement supersedes BS ISO 9587:1999 ISBN STI/33 BS ISO 9696:2007 Water quality. Measurement of gross alpha activity in non-saline water. Thick source method supersedes BS :1993 ISBN EH/3 BS ISO 10135:2007 Geometrical product specifications (GPS). Drawing indications for moulded parts in technical product documentation (TPD) supersedes BS ISO 10135:1994 ISBN members, non-members TDW/4 Also available as part of KIT 148. BS ISO 10285:2007 Rolling bearings. Sleeve type linear ball bearings. Boundary dimensions and tolerances supersedes BS 7637:1993 ISBN MCE/7 BS ISO 10907: Tools for moulding. Locating rings BS ISO :2007 Locating rings for mounting with thermal insulating sheets in small or medium moulds (types C and D) ISBN BS ISO 11256:2007 Iron ore pellets for shaft direct-reduction feedstocks. Determination of the clustering index ISBN ISE/58 BS ISO 11257:2007 Iron ores for shaft direct-reduction feedstocks. Determination of the low-temperature reduction-disintegration index and degree of metallization ISBN ISE/58 BS ISO 11258:2007 Iron ores for shaft direct-reduction feedstocks. Determination of the reducibility index, final degree of reduction and degree of metallization ISBN ISE/58 BS ISO 11783: Tractors and machinery for agriculture and forestry. Serial control and communications data network BS ISO :2007 Data link layer supersedes BS ISO :1998 ISBN members, non-members AGE/6/1 BS ISO 13930:2007 Iron ores for blast furnace feedstocks. Determination of low-temperature reductiondisintegration indices by dynamic method ISBN ISE/58 BS ISO 15105: Plastics. Film and sheeting. Determination of gas-transmission rate BS ISO :2007 Differential-pressure methods supersedes BS ISO :2002 ISBN PRI/75 16 Prices may be subject to change. Update Standards Feb 2008

11 BS ISO 15527:2007 Plastics. Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD). Requirements and test methods ISBN PRI/75 BS ISO/IEC 15944: Information technology. Business operational view BS ISO/IEC :2007 Business transaction scenarios. Accounting and economic ontology ISBN members, non-members IST/40 BS ISO 17066:2007 Hydraulic tools. Vocabulary ISBN MCE/8 BS ISO 17355:2007 Space data and information transfer systems. CCSDS file delivery protocol supersedes BS ISO 17355:2004 ISBN members, non-members ACE/68 BS ISO 17751:2007 Textiles. Quantitative analysis of animal fibres by microscopy. Cashmere, wool, speciality fibres and their blends ISBN TCI/80 BS ISO 17812:2007 Paper, board and pulps. Determination of total magnesium, total calcium, total manganese, total iron and total copper ISBN PAI/11 BS ISO 18695:2007 Textiles. Determination of resistance to water penetration. Impact penetration test ISBN TCI/24 BS ISO 19933:2007 Space systems. Format for spacecraft launch environment test report ISBN ACE/68/-/2 BS ISO 20858:2007 Ships and marine technology. Maritime port facility security assessments and security plan development supersedes PD ISO/PAS 20858:2004 ISBN members, non-members SME/32 BS ISO 21349:2007 Space systems. Project reviews ISBN ACE/68/-/5 BS ISO 22538: Space systems. Oxygen safety BS ISO :2007 Design of oxygen systems and components ISBN ACE/68 BS ISO :2007 Selection of metallic materials for oxygen systems and components ISBN ACE/68 BS ISO 22716:2007 Cosmetics. Good manufacturing practices (GMP). Guidelines on good manufacturing practices ISBN CW/217 BS ISO 23600:2007 Assistive products for persons with vision impairments and persons with vision and hearing impairments. Acoustic and tactile signals for pedestrian traffic lights ISBN CH/173 BS ISO 23893: Water quality. Biochemical and physiological measurements on fish BS ISO :2007 Sampling of fish, handling and preservation of samples ISBN EH/3/5 BS ISO 23997:2007 Resilient floor coverings. Determination of mass per unit area ISBN PRI/60 BS ISO 24254:2007 Lubricants, industrial oils and related products (class L). Family E (internal combustion engine oils). Specifications for oils for use in four-stroke cycle motorcycle gasoline engines and associated drivetrains (categories EMA and EMB) ISBN PTI/7 BS ISO 24497: Non-destructive testing. Metal magnetic memory BS ISO :2007 Vocabulary ISBN WEE/46 BS ISO :2007 General requirements ISBN WEE/46 BS ISO :2007 Inspection of welded joints ISBN WEE/46 BS ISO 28000:2007 Specification for security management systems for the supply chain supersedes DD ISO/PAS 28000:2005 ISBN SME/32 Update Standards Feb 2008 Prices may be subject to change. 17

12 BS Implementations continued... BS ISO 28001:2007 Security management systems for the supply chain. Best practices for implementing supply chain security, assessments and plans. Requirements and guidance supersedes DD ISO/PAS 28001:2006 ISBN members, non-members SME/32 BS ISO 28003:2007 Security management systems for the supply chain. Requirements for bodies providing audit and certification of supply chain security management systems supersedes DD ISO/PAS 28003:2006 ISBN members, non-members SME/32 BS ISO 28004:2007 Security management systems for the supply chain. Guidelines for the implementation of ISO supersedes DD ISO/PAS 28004:2006 ISBN members, non-members SME/32 BS ISO 81060: Non-invasive sphygmomanometers BS ISO :2007 Requirements and test methods for nonautomated measurement type ISBN members, non-members CH/121/5 BS IEC 62525:2007 Standard test interface language (STIL) for digital test vector data ISBN members, non-members GEL/93 BS IEC 62526:2007 Standard for extensions to standard test interface language (STIL) for semiconductor design environments ISBN members, non-members GEL/93 BS IEC 62527:2007 Standard for extensions to standard test interface language (STIL) for DC level specification ISBN members, non-members GEL/93 BS IEC 62528:2007 Standard testability method for embedded core-based integrated circuits ISBN members, non-members GEL/93 BS IEC 62529:2007 Standard for signal and test definition ISBN members, non-members GEL/93 BS IEC 62530:2007 Standard for SystemVerilog. Unified hardware design, specification and verification language ISBN members, non-members GEL/93 BS IEC 62531:2007 Standard for Property Specification Language (PSL) ISBN members, non-members GEL/93 PUBLISHED DOCUMENTS PD 6696: UK National Annex to BS EN Eurocode 4. Design of composite steel and concrete structures PD :2007 General rules and rules for bridges ISBN B/525/4 PD ISO/TR 22514: Statistical methods in process management. Capability and performance PD ISO/TR :2007 Process capability estimates and performance measures ISBN members, non-members SS/4 PD ISO/TR 23462:2007 Space systems. Guidelines to define the management framework for a space project ISBN ACE/68/-/5 PD ISO/IEC TR 25021:2007 Software engineering. Software product quality requirements and evaluation (SQuaRE). Quality measure elements ISBN members, non-members IST/15 DRAFTS FOR DEVELOPMENT DD CEN/TS 15676:2007 Wood flooring. Slip resistance. Pendulum test ISBN B/543 DD CEN/TS 15680:2007 Prefabricated timber stairs. Mechanical test methods ISBN B/543 DD ISO/TS 21872: Microbiology of food and animal feeding stuffs. Horizontal method for the detection of potentially enteropathogenic Vibrio spp. DD ISO/TS :2007 Detection of Vibrio parahaemolyticus and Vibrio cholerae ISBN AW/9 DD ISO/TS :2007 Detection of species other than Vibrio parahaemolyticus and Vibrio cholerae ISBN members, non-members AW/9 DD IEC/PAS 61755: Fibre optic connector optical interfaces DD IEC/PAS :2007 Optical interface. 8 degrees angled-pc end-face thermoset rectangular ferrule, single mode fibres ISBN GEL/86/2 18 Prices may be subject to change. Update Standards Feb 2008

13 DD IEC/PAS 62396: Process management for avionics. Atmospheric radiation effects DD IEC/PAS :2007 Guidelines for single event effects testing for avionics systems ISBN GEL/107 DD IEC/PAS :2007 Optimising system design to accommodate the single event effects (SEE) of atmospheric radiation ISBN GEL/107 PUBLICLY AVAILABLE SPECIFICATIONS Publicly Available Specifications (formerly Product Assessment Specifications) are issued to provide an interim document where there is a market need but where a full British or European Standard has yet to be published. PAS 24:2007 Enhanced security performance requirements for door assemblies supersedes PAS 24-1:1999 ISBN members, non-members B/538/4 SPECIALIST BOOKS FROM BSI BIP 0027:2007 Moving to mobility. Creating a successful remote work environment ISBN members, non-members BIP 2130:2008 Managing food safety CD-ROM ISBN members, non-members BIP 2142:2007 The Route map to business continuity management. Meeting the requirements of BS ISBN members, non-members BIP 2145:2008 BS Business continuity management. Code of practice. Laminated Pocketbook ISBN members, non-members AMENDMENTS TO BRITISH STANDARDS Most amendments are not issued separately. Those that make significant changes to a standard are incorporated into the standard which is re-issued as a new edition (see Updated British Standards ). Amendments which make smaller changes or corrections are available on request, free of charge to past purchasers of the standard. All amendments to date of despatch are included within any main publication when ordered for the first time. The following amendments to British Standards were made available last month. BS 3882:2007 Specification for topsoil and requirements for use CORRIGENDUM 1 AW/20 BS 5979:2007 Remote centres receiving signals from fire and security systems. Code of practice CORRIGENDUM 1 GW/1/11 BS EN 560:2005 Gas welding equipment. Hose connections for equipment for welding, cutting and allied processes CORRIGENDUM 1 WEE/18 BS EN ISO 661:2005 Animal and vegetable fats and oils. Preparation of test sample CORRIGENDUM 1 AW/307 BS EN 1151: Pumps. Rotodynamic pumps. Circulation pumps having a rated power input not exceeding 200 W for heating installations and domestic hot water installations BS EN :2006 Non-automatic circulation pumps, requirements, testing, marking CORRIGENDUM 1 MCE/6 BS EN :2006 Noise test code (vibro-acoustics) for measuring structure and fluid-borne noise CORRIGENDUM 1 MCE/6 BS EN 1434: Heat meters BS EN :2007 Pattern approval tests CORRIGENDUM 1 CPI/30/7 BS EN 14885:2006 Chemical disinfectants and antiseptics. Application of European Standards for chemical disinfectants and antiseptics CORRIGENDUM 1 CH/216 BS EN 60062:2005 Marking codes for resistors and capacitors CORRIGENDUM 1 EPL/40X BS EN 60512: Connectors for electronic equipment. Tests and measurements BS EN : Mechanical operation tests BS EN :2006 Test 13b. Insertion and withdrawal forces CORRIGENDUM 1 EPL/48 BS EN :2006 Test 13e. Polarizing and keying method CORRIGENDUM 1 EPL/48 BS EN 60598: Luminaires BS EN :1999 Particular requirements. Luminaires for emergency lighting CORRIGENDUM 3 CPL/34/4 Also incorporates Corrigenda 1 & 2, and Amendment 1. BS EN 60601: Medical electrical equipment BS EN :2006 Particular requirements for the safety, including essential performance, of electrocardiographic monitoring equipment CORRIGENDUM 1 CH/62/4 Update Standards Feb 2008 Prices may be subject to change. 19

14 Amendments to British Standards continued... BS EN 61000: Electromagnetic compatibility (EMC) BS EN :2007 Testing and measurement techniques. Damped oscillatory wave immunity test CORRIGENDUM 1 GEL/210/12 BS EN 61338: Waveguide type dielectric resonators BS EN :2006 General information and test conditions. Measurement method of complex relative permittivity for dielectric resonator materials at millimetre-wave frequency CORRIGENDUM 1 EPL/49 BS EN 62104:2007 Characteristics of DAB receivers CORRIGENDUM 1 EPL/100 BS ISO 11565:2006 Road vehicles. Spark-plugs. Test methods and requirements CORRIGENDUM 1 MCE/9 BS ISO 13226:2005 Rubber. Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers CORRIGENDUM 1 PRI/22 BS ISO 14520: Gaseous fire-extinguishing systems. Physical properties and system design BS ISO :2006 General requirements CORRIGENDUM 1 FSH/18/6 NA to BS EN :2004 UK National Annex to Eurocode 7. Geotechnical design. General rules CORRIGENDUM 1 B/526 UPDATED BRITISH STANDARDS The following standards have been amended and the amendments have been incorporated into an updated standard. NOTE: Updated British Standards must be reordered as the amendments are not available separately. BS 4177:1992 Specification for cooker control units AMENDMENT members, non-members PEL/23 Also incorporates Amendments 1, 2 and 3. BS 5268: Structural use of timber BS :2002 Code of practice for permissible stress design, materials and workmanship AMENDMENT members, non-members B/525/5 BS 5930:1999 Code of practice for site investigations AMENDMENT members, non-members B/526/3 BS 8474:2006 Furniture. Chairs with electrically operated support surfaces. Requirements AMENDMENT 1 FW/1 Also incorporates Corrigendum 1. BS EN 13924:2006 Bitumen and bituminous binders. Specifications for hard paving grade bitumens AMENDMENT 1 B/510/19 Also incorporates Corrigendum 1. BS EN 60745: Hand-held motor-operated electric tools. Safety BS EN :2004 Particular requirements of strapping tools AMENDMENT 1 CPL/61/6 Also incorporates Corrigendum 1. BS SP 114:1955 Specification for eye bolts (unified threads) for aircraft AMENDMENT 4 ACE/12 Also incorporates Amendments 1, 2 and 3. SPECIAL ANNOUNCEMENTS Comments can be sent by or by post to named contacts at: BSI Head Office 389 Chiswick High Road London W4 4AL Tel: BS 4978:2007 Visual strength grading of softwood. Specification BS 5756:2007 Visual grading of hardwood. Specification The responsible committee has agreed some corrections to these standards, which apply mainly to subclause 4.3 on processed timber. In view of the minor nature of the corrections they are not being circulated for public comment, but copies are available on request from the Programme Manager (below). Contact: Alan Hall alan.hall@bsi-global.com B/518 BS F 156:2006 Properties of fluid resistant ethylene-propylene rubber sheet, mouldings and extrusions. Specification CORRIGENDUM 1 ACE/65/-/25 BS 6SP 4:2000 Pins headed, plain shank, drilled, steel alloy and corrosion resisting steel with a strength class 880/1080 MPa AMENDMENT 2 ACE/12 Also incorporates Corrigendum 1 and Amendment 1. BS 8666:2005 Scheduling, dimensioning, bending and cutting of steel reinforcement for concrete. Specification AMENDMENT 1 ISE/9/1 BS EN ISO 1856:2001 Flexible cellular polymeric materials. Determination of compression set AMENDMENT 1 PRI/24 Please do not send confirmation of orders placed by telephone as it can lead to duplication 20 Prices may be subject to change. Update Standards Feb 2008