BS :2004 Code of practice for sloping glazing. supersedes BS 5516:1991 ISBN members non-members B/520, B/520/5

Transcription

1 BRITISH STANDARDS BS 2000:- Methods of test for petroleum and its products BS :- Determination of chlorine and bromine content. Wavelength-dispersive X-ray fluorescence spectrometry See BS ISO BS :- Liquid petroleum products. Determination of hydrocarbon types and oxygenates in petrol. Multidimensional gas chromatography method See BS EN BS 4515:- Specification for welding of steel pipelines on land and offshore. BS :2004 Carbon and carbon manganese steel pipelines supersedes BS :2000 ISBN members non-members WEE/21, WEE/21/7 BS 5502:- Buildings and structures for agriculture BS :2004 Fire precautions. Code of practice supersedes BS :1990 ISBN BS 5516:- Patent glazing and sloping glazing for buildings BS :2004 Code of practice for design and installation of sloping and vertical patent glazing supersedes BS 5516:1991 ISBN members non-members B/549 B/520, B/520/5 BS :2004 Code of practice for sloping glazing supersedes BS 5516:1991 ISBN members non-members BS 5588:- Fire precautions in the design, construction and use of buildings BS :2004 Access and facilities for fire-fighting supersedes BS :1991 ISBN X members non-members BS :2004 Managing fire safety ISBN members non-members BS 5656:- Safety rules for the construction and installation of escalators and passenger conveyors BS :2004 Code of practice for the selection, installation and location of new escalators and moving walks ISBN members non-members BS 6068:- Water quality BS :- B/520, B/520/5 FSH/14 FSH/14 MHE/4, MHE/4/3/2 Physical, chemical and biochemical methods BS :- See BS EN ISO BS 6100:- Glossary of building and civil engineering terms BS :2004 General terms supersedes BS :1999 ISBN members non-members BS 7801:2004 Escalators and moving walks. Code of practice for safe working on escalators and moving walks supersedes BS 7801:1995 ISBN X members non-members BS EN PUBLICATIONS BS EN ISO 340:2004 Conveyor belts. Laboratory scale flammability characteristics. Requirements and test method supersedes BS EN 20340:1993 ISBN BS EN ISO 376:2004 Metallic materials. Calibration of force-proving instruments used for the verification of uniaxial testing machines supersedes BS EN ISO 376:2002 ISBN MHE/4 PRI/67 ISE/NFE/4, ISE/NFE/4/1 BS EN 413:- Masonry cement BS EN 413-1:2004 Composition, specifications and conformity criteria supersedes BS 5224:1995 which remains current ISBN members non-members BS EN 520:2004 B/516, B/516/10 Gypsum plasterboards. Definitions, requirements and test methods ISBN members non-members B/544, B/544/2 BS EN PUBLICATIONS Page 1 of 65

2 BS EN 573:- Aluminium and aluminium alloys. Chemical composition and form of wrought products BS EN 573-1:2004 Numerical designation system supersedes BS EN 573-1:1995 ISBN BS EN 749:2004 NFE/35, NFE/35/5 Playing field equipment. Handball goals. Functional and safety requirements, test methods supersedes BS EN 749:1996 ISBN BS EN 750:2004 Playing field equipment. Hockey goals. Functional and safety requirements, test methods supersedes BS EN 750:1996 ISBN BS EN 1011:- Welding. Recommendations for welding of metallic materials BS EN :2004 Welding of cast irons supersedes BS 4570:1985 ISBN BS EN ISO 1181:2004 Fibre ropes. Manila and sisal. 3-, 4- and 8-strand ropes ISBN SW/14 SW/14 ISE/35 TCI/77 BS EN ISO 1346:2004 Fibre ropes. Polypropylene split film, monofilament and multifilament (PP2) and polypropylene high tenacity multifilament (PP3). 3-, 4- and 8- strand ropes supersedes BS EN 699:1995 ISBN BS EN 1365:- Fire resistance tests for loadbearing elements BS EN :2004 Balconies and walkways ISBN X BS EN :2004 Stairs ISBN BS EN 1366:- Fire resistance tests for service installations BS EN :2004 TCI/77 FSH/22, FSH/22/7 FSH/22, FSH/22/7 Raised access and hollow core floors ISBN BS EN 1514:- Flanges and their joints. Dimensions of gaskets for PN-designated flanges BS EN :2004 FSH/22, FSH/22/13 Polymeric O-ring gaskets for grooved flanges ISBN PSE/2 BS EN 1709:2004 Safety requirements for cableway installations designed to carry persons. Precommissioning inspection, maintenance, operational inspection and checks ISBN BS EN 1765:2004 Rubber hose assemblies for oil suction and discharge services. Specification for the assemblies supersedes BS EN 1765:1998 ISBN BS EN 1777:2004 Hydraulic platforms (HPs) for fire fighting and rescue services. Safety requirements and testing ISBN members non-members BS EN 1915:- MCE/20 PRI/66 FSH/17, FSH/17/3 Aircraft ground support equipment. General requirements BS EN :2004 Vibration measurement methods and reduction ISBN BS EN ISO 1968:2004 Fibre ropes and cordage. Vocabulary supersedes BS 3724:1991 ISBN members non-members BS EN ISO 1969:2004 Fibre ropes. Polyethylene. 3- and 4-strand ropes supersedes BS EN 700:1995 ISBN ACE/57 TCI/77 TCI/77 BS EN PUBLICATIONS Page 2 of 65

3 BS EN ISO 4934:2003 Steel and iron. Determination of sulfur content. Gravimetric method supersedes BS :1985 ISBN BS EN ISO 6401:2004 Plastics. Homopolymer and copolymer resins of vinyl chloride. Determination of residual vinyl chloride monomer. Gas chromatographic method ISBN BS EN ISO 8106:2004 Glass containers. Determination of capacity by gravimetric method. Test method supersedes BS ISO 8106:1985 ISBN X BS EN ISO 8491:2004 Metallic materials. Tube (in full section). Bend test supersedes BS EN 10232:1994 ISBN X ISE/18 PRI/21 PKW/0 ISE/NFE/4, ISE/NFE/4/2 BS EN ISO 8492:2004 Metallic materials. Tube. Flattening test supersedes BS EN 10233:1994 ISBN ISE/NFE/4, ISE/NFE/4/2 BS EN ISO 8493:2004 Metallic materials. Tube. Drift-expanding test supersedes BS EN 10234:1994 ISBN ISE/NFE/4, ISE/NFE/4/2 BS EN PUBLICATIONS BS EN ISO 8494:2004 Metallic materials. Tube. Flanging test supersedes BS EN 10235:1994 ISBN ISE/NFE/4, ISE/NFE/4/2 BS EN ISO 8495:2004 Metallic materials. Tube. Ring-expanding test supersedes BS EN 10236:1994 ISBN ISE/NFE/4, ISE/NFE/4/2 BS EN ISO 8496:2004 Metallic materials. Tube. Ring tensile test supersedes BS EN 10237:1994 ISBN X ISE/NFE/4, ISE/NFE/4/2 BS EN ISO 9409:- Manipulating industrial robots. Mechanical interfaces BS EN ISO :2003 Shafts supersedes BS EN ISO :1997 ISBN BS EN 10025:- Hot rolled products of structural steels BS EN :2004 General technical delivery conditions supersedes BS EN 10025:1993, Parts 1-3 of BS EN 10113:1993, Parts 1 & 2 of BS EN 10137:1996, and BS EN 10155:1993 ISBN members non-members BS EN :2004 Technical delivery conditions for non-alloy structural steels supersedes BS EN 10025:1993 ISBN members non-members AMT/4 ISE/12 ISE/12 BS EN :2004 Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels supersedes Parts 1 & 2 of BS EN 10113:1993 ISBN BS EN :2004 Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels supersedes Parts 1 & 3 of BS EN 10113:1993 ISBN BS EN :2004 Technical delivery conditions for structural steels with improved atmospheric corrosion resistance supersedes BS EN 10155:1993 ISBN BS EN :2004 Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition supersedes Parts 1 & 2 of BS EN 10137:1996 ISBN BS EN ISO 10240:2004 Small craft. Owner's manual supersedes BS EN ISO 10240:1996 ISBN BS EN ISO 10497:2004 Testing of valves. Fire type-testing requirements supersedes BS :1987 ISBN BS EN ISO 11904:- ISE/12 ISE/12 ISE/12 ISE/12 GME/33 PSE/7, PSE/7/1 Acoustics. Determination of sound immission from sound sources placed close to the ear Page 3 of 65

4 BS EN ISO :2004 Technique using a manikin ISBN BS EN 12215:2004 EH/1, EH/1/1 Coating plants. Spray booths for application of organic liquid coating materials. Safety requirements ISBN members non-members BS EN 12217:2003 Doors. Operating forces. Requirements and classification ISBN BS EN ISO 12683:2004 MCE/3, MCE/3/8 Mechanically deposited coatings of zinc. Specification and test methods ISBN BS EN 12845:2004 Fixed firefighting systems. Automatic sprinkler systems. Design, installation and maintenance supersedes BS EN 12845:2003 ISBN members non-members BS EN 12927:- B/538 STI/41 FSH/18, FSH/18/2 Safety requirements for cableway installations designed to carry persons. Ropes BS EN :2004 Safety factors ISBN MCE/20 BS EN :2004 End fixings ISBN BS EN 13209:- Child use and care articles. Baby carriers. Safety requirements and test methods BS EN :2004 Framed back carriers ISBN BS EN 13223:2004 Safety requirements for cableway installations designed to carry persons. Drive systems and other mechanical equipment ISBN members non-members BS EN 13243:2004 Safety requirements for cableway installations designed to carry persons. Electrical equipment other than for drive systems ISBN members non-members BS EN 13374:2004 Temporary edge protection systems. Product specification, test methods ISBN members non-members BS EN 13422:2004 Vertical road signs. Portable deformable warning devices and delineators. Portable road traffic signs. Cones and cylinders supersedes BS 873-8:1985 ISBN X members non-members MCE/20 CW/41 MCE/20 MCE/20 B/514, B/514/21 B/509, B/509/3 BS EN 13457:2004 Footwear, leather and imitation leather goods manufacturing machines. Splitting, skiving, cutting, cementing and cement drying machines. Safety requirements ISBN members non-members BS EN 13523:- Coil coated metals. Test methods BS EN :2004 Resistance to solvents (rubbing test) ISBN X BS EN :2004 Resistance to scratching ISBN BS EN :2004 Resistance to abrasion ISBN BS EN :2004 Adhesion of strippable films ISBN BS EN :2004 Panel design and method of atmospheric exposure testing ISBN MCE/3/12 STI/27 STI/27 STI/27 STI/27 STI/27 BS EN PUBLICATIONS Page 4 of 65

5 BS EN :2004 Foam adhesion ISBN BS EN :2004 Resistance to blocking and pressure marking ISBN BS EN 13631:- Explosives for civil uses. High explosives STI/27 STI/27 BS EN 13938:- Explosives for civil uses. Propellants and rocket propellants BS EN :2004 Requirements ISBN BS EN :2004 Determination of resistance to electrostatic energy ISBN CII/61 CII/61 BS EN :2004 Test methods for the determination of stability and strength of the structure ISBN BS EN 14074:2004 Office furniture. Tables and desks and storage furniture. Test methods for the determination of strength and durability of moving parts ISBN FW/0 FW/0 BS EN :2004 Specifications of boosters with different initiating capability ISBN X BS EN 13742:- Irrigation techniques. Solid set sprinkler systems BS EN :2004 Selection, design, planning and installation ISBN BS EN :2004 Test methods ISBN BS EN 13863:- Concrete pavements BS EN :2004 Test methods for the determination of wear resistance of concrete pavements to studded tyres ISBN CII/61 AGE/30 AGE/30 B/510, B/510/3 BS EN ISO 14001:2004 Environmental management systems. Requirements with guidance for use follows:supersedes BS EN ISO 14001:1996 which remains current but is obsolescent ISBN members non-members BS EN 14035:- Fireworks BS EN :2004 Throwdowns. Specification and test methods partially supersedes Parts 2 & 3 of BS 7114:1988 which are obsolescent ISBN BS EN 14073:- Office furniture. Storage furniture BS EN :2004 Safety requirements ISBN SES/1/1 CII/47 FW/0 BS EN 14129:2004 Pressure relief valves for LPG tanks ISBN X BS EN 14345:2004 Characterization of waste. Determination of hydrocarbon content by gravimetry ISBN BS EN 14350:- Child use and care articles. Drinking equipment BS EN :2004 General and mechanical requirements and tests ISBN BS EN :2004 Chemical requirements and tests ISBN PVE/19 B/508, B/508/3 CW/42 CW/42 BS EN PUBLICATIONS Page 5 of 65

6 BS EN 14366:2004 Laboratory measurement of noise from waste water installations ISBN BS EN 14404:2004 Personal protective equipment. Knee protectors for work in the kneeling position ISBN BS EN 14499:2004 Textile floor coverings. Minimum requirements for carpet underlays partially supersedes BS 5808:1991 ISBN BS EN 14517:2004 (BS :2004) EH/1, EH/1/6 Methods of test for petroleum and its products. BS Liquid petroleum products. Determination of hydrocarbon types and oxygenates in petrol. Multidimensional gas chromatography method ISBN members non-members BS EN 14602:2004 Footwear. Test methods for the assessment of ecological criteria ISBN BS EN 14610:2004 Welding and allied processes. Definitions of metal welding processes ISBN members non-members PH/3 PRI/3 PTI/13 TCI/69 WEE/1 BS EN 14664:2004 Chemicals used for treatment of water intended for human consumption. Iron (III) sulfate, solid ISBN members non-members BS EN 14870:- Petroleum and natural gas industries. Induction bends, fittings and flanges for pipeline transportation systems BS EN :2004 Induction bends ISBN members non-members BS EN ISO 15006:2004 CII/59 PSE/17, PSE/17/2 Road vehicles. Ergonomic aspects of transport information and control systems. Specifications and compliance procedures for in-vehicle auditory presentation ISBN BS EN ISO 15187:2002 Manipulating industrial robots. Graphical user interfaces for programming and operation of robots (GUI-R) ISBN members non-members BS EN ISO/IEC 17000:2004 Conformity assessment. Vocabulary and general principles partially supersedes BS EN 45020:1998 ISBN members non-members BS EN ISO 18278:- Resistance welding. Weldability EPL/278 AMT/4 QS/3 BS EN ISO :2004 Assessment of weldability for resistance spot, seam and projection welding of metallic materials ISBN BS EN ISO :2004 Alternative procedures for the assessment of sheet steels for spot welding ISBN BS EN ISO 21567:2004 Microbiology of food and animal feeding stuffs. Horizontal method for the detection of Shigella spp. ISBN members non-members BS EN 50065:- Signalling on low-voltage electrical installations in the frequency range 3 khz to khz BS EN :- Low voltage decoupling filters BS EN :2004 Phase coupler ISBN BS EN 60034:- Rotating electrical machines BS EN :2004 Mechanical vibration of certain machines with shaft heights 56 mm and higher. Measurement, evaluation and limits of vibration severity supersedes BS EN :1998 which remains current ISBN WEE/29 WEE/29 AW/9 PEL/205 PEL/2 BS EN PUBLICATIONS Page 6 of 65

7 BS EN 60068:- Environmental testing BS EN :- Test methods BS EN :2004 Test Td. Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD) supersedes BS EN :1999 which remains current ISBN BS EN 60085:2004 Electrical insulation. Thermal classification supersedes BS 2757:1986 ISBN BS EN 60099:- Surge arresters BS EN :2004 EPL/501 GEL/15, GEL/15/5 Metal-oxide surge arresters without gaps for a.c. systems supersedes BS EN :1993 ISBN members non-members BS EN 60300:- Dependability management BS EN :- Application guide BS EN :2004 Life cycle costing supersedes BS :1997 ISBN members non-members BS EN 60317:- Specifications for particular types of winding wires PEL/37 DS/1 BS EN :2004 Polyesterimide enamelled round aluminium wire, class 180 supersedes BS EN :1996 which remains current ISBN BS EN 60598:- Luminaires BS EN :2004 General requirements and tests supersedes BS EN :2000 which remains current ISBN members non-members BS EN 60601:- Medical electrical equipment BS EN :- General requirements for safety BS EN :2004 Collateral standard. Usability ISBN members non-members BS EN 60641:- GEL/55 CPL/34, CPL/34/4 CH/62, CH/62/1 Specification for pressboard and presspaper for electrical purposes BS EN :2004 Methods of tests supersedes BS EN :1996 ISBN BS EN 60747:- Discrete semiconductor devices and integrated circuits BS EN :- Microwave integrated circuits BS EN :2004 Switches ISBN members non-members GEL/15 EPL/47 BS EN :2004 Technology approval schedule (TAS) for monolithic microwave integrated circuits ISBN members non-members BS EN 60825:- Safety of laser products BS EN :2004 Safety of optical fibre communication systems (OFCS) supersedes BS EN :2000 ISBN members non-members BS EN 60974:- Arc welding equipment BS EN :2004 Electrode holders supersedes BS EN :1996 ISBN BS EN 61047:2004 D.C. or A.C. supplied electronic step-down convertors for filament lamps. Performance requirements supersedes BS EN 61047:1993 ISBN BS EN 61158:- Fieldbus standard for use in industrial control systems BS EN :2004 EPL/47 EPL/76 WEE/6 CPL/34, CPL/34/3 Application layer protocol specification supersedes BS EN 50254:1999 and BS EN 50170:1997 ISBN members non-members AMT/7 BS EN PUBLICATIONS Page 7 of 65

8 BS EN 61221:2004 Petroleum products and lubricants. Triaryl phosphate ester turbine control fluids (category ISO-L-TCD). Specifications supersedes BS EN 61221:1996 which remains current ISBN BS EN 61223:- Evaluation and routine testing in medical imaging departments BS EN :- Acceptance tests BS EN :2004 Imaging performance of computed tomography X-ray equipment ISBN members non-members BS EN 61241:- Electrical apparatus for use in the presence of combustible dust BS EN :2004 Selection and installation GEL/10 CH/62, CH/62/2 partially supersedes BS EN :1999 and Parts 1:1985 & 2:1988 of BS 6467 ISBN members non-members GEL/31, GEL/31/20 BS EN 61300:- Fibre optic interconnecting devices and passive components. Basic test and measurement procedures BS EN :- Tests BS EN :2004 Thermal shocks ISBN BS EN 61337:- Filters using waveguide type dielectric resonators GEL/86, GEL/86/2 BS EN :2004 Guide for use ISBN BS EN 61340:- Electrostatics BS EN :- Standard test methods for specific applications BS EN :2004 Methods for characterizing the electrostatic protection of footwear and flooring in combination with a person ISBN BS EN 61753:- Fibre optic interconnecting devices and passive components performance standard BS EN :- Single mode fibre optic pigtailed style isolators for category U BS EN :2004 Uncontrolled environment ISBN BS EN :- Single mode fibre optic pigtailed style circulators for category U BS EN :2004 Uncontrolled environment ISBN BS EN 62054:- EPL/49 GEL/101 GEL/86, GEL/86/2 GEL/86, GEL/86/2 Electricity metering (a.c.). Tariff and load control BS EN :2004 Particular requirements for electronic ripple control receivers partially supersedes BS EN 61037:1993 ISBN BS EN :2004 Particular requirements for time switches partially supersedes BS EN 61038:1993 ISBN BS EN 62309:2004 Dependability of products containing reused parts. Requirements for functionality and tests ISBN BS ENs IMPLEMENTED BY AMENDMENT BS EN ISO 17294:- Water quality. Application of inductively coupled plasma mass spectrometry (ICP-MS) BS EN ISO :2004 (BS ISO :2003, BS :2003) Determination of 62 elements PEL/13 PEL/13 DS/1 EH/3, EH/3/2 Implementation of European standard EN ISO by amendment to the dual-numbered standard BS ISO :2003, BS :2003. BS IMPLEMENTATIONS BS ISO 129:- Technical drawings. Indication of dimensions and tolerances BS ISO 129-1:2004 General principles supersedes BS ISO 129:1985 ISBN X members non-members TDW/4 BS IMPLEMENTATIONS Page 8 of 65

9 BS ISO 706:2004 Rubber latex. Determination of coagulum content (sieve residue) supersedes BS :1987 ISBN BS ISO 799:2004 Ships and marine technology. Pilot ladders supersedes BS MA 92:1981 ISBN BS ISO 1431:- PRI/50 SME/32, SME/32/1 Rubber, vulcanized or thermoplastic. Resistance to ozone cracking BS ISO :2004 Static and dynamic strain testing supersedes Parts A43:1990 & A44:1995 of BS 903 ISBN BS ISO 4148:2004 Road vehicles. Special warning lamps. Dimensions ISBN BS ISO 6105:- Blanks for superabrasive cutting-off wheels BS ISO :2004 Manually guided cutting-off in building and civil engineering supersedes BS :1990 ISBN BS ISO :2004 Hand-held cutting-off in building and civil engineering supersedes BS :1990 ISBN PRI/22 AUE/1 MTE/13 MTE/13 BS ISO 6611:2004 Milk and milk products. Enumeration of colony-forming units of yeasts and/or moulds. Colony-count technique at 25$0DC ISBN BS ISO 8254:- Paper and board. Measurement of specular gloss BS ISO : $0D gloss with a converging beam, TAPPI method ISBN BS ISO 14004:2004 Environmental management systems. General guidelines on principles, systems and support techniques supersedes BS ISO 14004:1996 ISBN members non-members BS ISO/IEC 15504:- Information technology. Process assessment BS ISO/IEC :2004 Concepts and vocabulary supersedes Parts 1 & 9 of BS ISO/IEC TR 15504:1998 ISBN BS ISO 15552:2004 Pneumatic fluid power. Cylinders with detachable mountings, kpa (10 bar) series, bores from 32 mm to 320 mm. Basic, mounting and accessories dimensions supersedes BS ISO 6431:1992 ISBN X AW/5 PAI/11 SES/1/1 IST/15 MCE/18 BS ISO 15597:2001 (BS :2004) Methods of test for Petroleum and its products. BS Determination of chlorine and bromine content. Wavelength-dispersive X-ray fluorescence spectrometry ISBN BS ISO 15825:2004 Rubber compounding ingredients. Carbon black. Determination of aggregate size distribution by disc centrifuge photosedimentometry ISBN X BS ISO 15838:2003 Ships and marine technology. Fittings for use with gasketed mechanical couplings used in piping applications. Performance specification ISBN BS ISO 15885:2002 PTI/13 PRI/50 SME/32, SME/32/3 Milk fat. Determination of the fatty acid composition by gas-liquid chromatography ISBN BS ISO 15886:- Agricultural irrigation equipment. Sprinklers BS ISO :2004 Definition of terms and classification ISBN X AW/5 AGE/30 BS IMPLEMENTATIONS Page 9 of 65

10 BS ISO :2004 Characterization of distribution and test methods ISBN BS ISO/IEC 15961:2004 Information technology. Radio frequency identification (RFID) for item management. Data protocol. Application interface ISBN members non-members BS ISO/IEC 15962:2004 Information technology. Radio frequency identification (RFID) for item management. Data protocol. Data encoding rules and logical memory functions ISBN members non-members BS ISO 16069:2004 Graphical symbols. Safety signs. Safety way guidance systems (SWGS) ISBN members non-members BS ISO 16132:2004 Ductile iron pipes and fittings. Seal coats for cement mortar linings ISBN BS ISO 16200:- AGE/30 IST/34 IST/34 PH/8, PH/8/1 Workplace air quality. Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography BS ISO :2001 Pumped sampling method ISBN members non-members BS IMPLEMENTATIONS PSE/10 EH/2, EH/2/2 BS ISO :2000 Diffusive sampling method ISBN members non-members BS ISO 16564:2004 EH/2, EH/2/2 Rubber, raw natural. Determination of average molecular mass and molecular-mass distribution by size exclusion chromatography (SEC) ISBN X BS ISO 16656:2004 Hydraulic fluid power. Single rod, short-stroke cylinders with bores from 32 mm to 100 mm for use at 10 MPa (100 bar). Mounting dimensions ISBN BS ISO 16703:2004 Soil quality. Determination of content of hydrocarbon in the range C10 to C40 by gas chromatography ISBN BS ISO 17081:2004 Method of measurement of hydrogen permeation and determination of hydrogen uptake and transport in metals by an electrochemical technique ISBN BS ISO 17240:2004 Fruit and vegetable products. Determination of tin content. Method using flame atomic absorption spectrometry ISBN PRI/23 MCE/18 EH/4, EH/4/3 ISE/NFE/8 AW/100 BS ISO 17559:2003 Hydraulic fluid power. Electrically controlled hydraulic pumps. Test methods to determine performance characteristics ISBN MCE/18, MCE/18/-/8 BS ISO 18329:2004 Milk and milk products. Determination of furosine content. Ion-pair reverse-phase high-performance liquid chromatography method ISBN X BS ISO 19819:2004 Metallic materials. Tensile testing in liquid helium ISBN AW/5 ISE/NFE/4, ISE/NFE/4/1 BS ISO/IEC 21000:- Information technology. Multimedia framework (MPEG-21) BS ISO/IEC :2004 Digital item adaptation ISBN members non-members BS ISO 21005:2004 Ships and marine technology. Thermally toughened safety glass panes for windows and side scuttles supersedes BS MA 24:1974 ISBN IST/37 SME/32, SME/32/8 Page 10 of 65

11 BS ISO 21287:2004 Pneumatic fluid power. Cylinders. Compact cylinders, kpa (10 bar) series, bores from 20 mm to 100 mm ISBN BS ISO 21538:2004 Blanks for superabrasive cutting-off wheels. Mounting and fixing bores. Building construction and civil engineering ISBN BS ISO 23529:2004 Rubber. General procedures for preparing and conditioning test pieces for physical test methods supersedes Parts A32:1988, A35:1995, A38:1991 & A49:1984 of BS 903 ISBN BS IEC 60709:2004 Nuclear power plants. Instrumentation and control systems important to safety. Separation ISBN BS IEC 60747:- Discrete semiconductor devices and integrated circuits BS IEC :2004 Metal-oxide-semiconductor field-effect transistors (MOSFETs) for power switching applications ISBN members non-members BS IEC 61691:- Behavioural languages MCE/18 MTE/13 PRI/22 NCE/8 EPL/47 BS IEC :2004 VHDL language reference manual ISBN members non-members BS IEC :2004 Verilog hardware description language ISBN members non-members BS IEC :2004 VITAL ASIC (application specific integrated circuit) modeling specification ISBN members non-members BS IEC 62138:2004 Nuclear power plants. Instrumentation and control important for safety. Software aspects for computer-based systems performing category B or C functions ISBN members non-members BS IEC 62241:2004 Nuclear power plants. Main control room. Alarm functions and presentation ISBN members non-members PUBLISHED DOCUMENTS PD CEN/TR 14748:2004 Non-destructive testing. Methodology for qualification of non-destructive tests ISBN GEL/93 GEL/93 GEL/93 NCE/8 NCE/8 WEE/46 PD CEN/TR 14819:- Safety recommendations for cableway installations designed to carry persons. Prevention and fight against fire PD CEN/TR :2004 Funicular railways in tunnels ISBN PD ISO/TR 14969:2004 Medical devices. Quality management systems. Guidance on the application of ISO 13485:2003 ISBN members non-members PD ISO/IEC TR 18037:2004 MCE/20 CH/210, CH/210/1 Programming languages. C. Extensions to support embedded processors ISBN members non-members PD ISO/IEC Guide 67:2004 Conformity assessment. Fundamentals of product certification ISBN PD CLC/TR 50424:2004 Electric cables. List of residual recognised national types ISBN PD IEC TR 62380:2004 IST/5 QS/3 GEL/20, GEL/20/17 Reliability data handbook. Universal model for reliability prediction of electronics components, PCBs and equipment ISBN members non-members EPL/47 PUBLISHED DOCUMENTS Page 11 of 65

12 DRAFTS FOR DEVELOPMENT DD CEN/TS 14751:2004 Welding. Use of time-of-flight diffraction technique (TOFD) for examination of welds ISBN DD CEN/TS 14773:2004 Postal services. Quality of service. Measurement of loss and substantial delay in priority and first class single piece mail using a survey of test letters ISBN DD CEN/TS 14826:2004 Postal services. Automatic identification of items. Two dimensional bar code symbol print quality specification for machine readable digital postage marks ISBN PUBLICLY AVAILABLE SPECIFICATIONS PAS 60:- Equipment used in the controlled removal of asbestos-containing materials PAS 60-2:2004 Negative pressure units. Specification ISBN PAS 60-3:2004 Operation, cleaning and maintenance of class H vacuum cleaners. Code of practice ISBN WEE/46 SVS/4 SVS/4 BIP 3016:2004 BS 8888:2004 Technical Product Specification CD-ROM VAT members VAT non-members BIP 3017:2004 Occupational Health and Safety (OH&S) Standards and Guidance CD-ROM supersedes EP 511 ISBN VAT members VAT non-members Includes OHSAS 18001, OHSAS 18002, BS 8800 and Managing Safety the Systems Way (BIP 2050). KITS, SETS, PACKS AND SERIES KIT 149 Aluminium & aluminium alloys. Chemical composition and mechanical properties kit ISBN members non-members Special offer. Includes BS EN 485-2, BS EN 541, BS EN 546-2, BS EN 570, Parts 1 to 3 of BS EN 573, BS EN 586-2, BS EN 602, BS EN 603-2, BS EN 683-2, BS EN 754-2, BS EN 755-2, BS EN , BS EN , BS EN and BS EN KIT 150 Electromagnetic fields pack ISBN members non-members Special offer. Includes BS EN 50357, BS EN 50361, BS EN 50366, BS EN 50371, BS EN and BS EN KIT 151 Biotechnology. Performance criteria for vessels kit ISBN members non-members Special offer. Includes Parts 1 to 6 of BS EN TDW/4 KIT 152 Biotechnology. Performance criteria for piping and instrumentation kit ISBN members non-members Special offer. Includes Parts 1 to 6 of BS EN KIT 153 Domestic cooking appliances safety kit ISBN members non-members Special offer. Includes BS 6172 and Parts 1 to 4 of BS EN KIT 154 Electric cables. PVC-insulated non-armoured cables kit ISBN members non-members Special offer. Includes BS 5099, BS 6004, BS 6360, BS , BS 6500, BS 7540, Parts 3.1, 4.1 & 4.2 of BS 7655, BS EN , BS EN 50334, Parts 1 & 2 of BS EN and BS KIT 155 Conduit systems for cable management kit ISBN members non-members Special offer. Includes Parts 1 & 21 to 23 of BS EN 61386, BS EN 60423, BS EN 60529, and Parts 10 to 13 of BS EN KIT 156 Welding metallic materials kit ISBN members non-members Special offer. Includes Parts 1 & 2 of BS EN 287, BS EN 439, Parts 1 to 4 of BS EN 729, Parts 1 to 5 & Part 7 of BS EN 1011, BS EN 1418, BS EN 22553, BS EN ISO 4063 and BS EN ISO ELECTRONIC PRODUCTS KITS, SETS, PACKS AND SERIES Page 12 of 65

13 KIT 157 Preparation and presentation of product specifications (supplement to KIT Design management kit) ISBN members non-members Special offer. Includes Parts 1 & 2 of BS 7373, BS 0-3, BS , Parts 2 & 3 of BS 4884, BS , Parts 3 to 5 of BS 7000, BS ISO 31-0, BS ISO 1000 and Parts 1 & 2 of BS EN ISO/IEC KIT 158 Control circuit devices and switching elements kit ISBN members non-members Special offer. Includes Parts 1 to 7 of BS EN KIT 159 Steel tubes technical delivery conditions kit ISBN members non-members Special offer. Includes BS EN 10255, BS EN , BS EN and Parts 1 to 5 of BS EN KIT 160 Medical devices kit ISBN members non-members Special offer. Includes BS EN ISO 13485, Parts 1 & 2 of BS EN ISO 14155, BS EN ISO and BS EN 980. AMENDMENTS TO BRITISH STANDARDS BS 2000:- Methods of test for petroleum and its products BS :- Liquid petroleum products. Determination of hydrocarbon types and oxygenates in petrol. Multidimensional gas chromatography method See BS EN BS 6068:- Water quality BS :- Physical, chemical and biochemical methods BS :- See BS ISO BS 7870:- LV and MV polymeric insulated cables for use by distribution and generation utilities BS :1999 Methods of test AMENDMENT 1 AMD BS : members non-members BS EN 2:1992 Classification of fires AMENDMENT 1 AMD BS EN 2: members non-members BS EN 572:- Glass in building. Basic soda lime silicate glass products BS EN 572-1:2004 Definitions and general physical and mechanical properties CORRIGENDUM 1 AMD GEL/20/16 FSH/2 BS EN 572-1:2004 B/520, B/520/1 BS EN 772:- Methods of test for masonry units BS EN :2000 Determination of dimensions AMENDMENT 1 AMD BS EN :2000 B/519, B/519/1 BS EN 934:- Admixtures for concrete, mortar and grout BS EN 934-4:2001 Admixtures for grout for prestressing tendons. Definitions, requirements, conformity, marking and labelling AMENDMENT 1 AMD BS EN 934-4:2001 B/517, B/517/3 BS EN 1015:- Methods of test for mortar for masonry BS EN :1999 Determination of consistence of fresh mortar (by flow table) AMENDMENT 1 AMD BS EN :1999 B/519, B/519/2 BS EN 1230:- Paper and board intended for contact with foodstuffs. Sensory analysis BS EN :2001 Off-flavour (taint) CORRIGENDUM 1 AMD BS EN :2001 CW/47, CW/47/3 BS EN ISO 4126:- Safety devices for protection against excessive pressure BS EN ISO :2003 Bursting disc safety devices CORRIGENDUM 1 AMD BS EN ISO : members non-members BS EN 12390:- Testing hardened concrete PVE/12 AMENDMENTS TO BRITISH STANDARDS Page 13 of 65

14 BS EN :2000 Shape, dimensions and other requirements for specimens and moulds CORRIGENDUM 2 AMD BS EN :2000 B/517, B/517/1 Also incorporates Corrigendum 1. BS EN :2000 Flexural strength of test specimens CORRIGENDUM 1 AMD BS EN :2000 B/517, B/517/1 BS EN :2000 Tensile splitting strength of test specimens CORRIGENDUM 1 AMD BS EN :2000 B/517, B/517/1 BS EN :2000 Density of hardened concrete CORRIGENDUM 1 AMD BS EN :2000 B/517, B/517/1 BS EN 13561:2004 External blinds. Performance requirements including safety CORRIGENDUM 1 AMD BS EN 13561: members non-members B/538, B/538/3 BS EN 13639:2002 Determination of total organic carbon in limestone CORRIGENDUM 1 AMD BS EN 13639:2002 B/516, B/516/12 AMENDMENTS TO BRITISH STANDARDS BS EN 14024:2004 Metal profiles with thermal barrier. Mechanical performance. Requirements, proof and tests for assessment CORRIGENDUM 1 AMD BS EN 14024:2004 B/538, B/538/1 BS EN 14458:2004 Personal eye-equipment. Faceshields and visors for use with firefighters and high performance industrial safety helmets used by firefighters, ambulance and emergency services CORRIGENDUM 1 AMD BS EN 14458: members non-members PH/2, PH/2/2 BS EN 14517:2004 (BS :2004) Methods of test for petroleum and its products. BS Liquid petroleum products. Determination of hydrocarbon types and oxygenates in petrol. Multidimensional gas chromatography method CORRIGENDUM 1 AMD BS EN 14517: members non-members BS EN ISO 14588:2001 Blind rivets. Terminology and definitions CORRIGENDUM 1 AMD BS EN ISO 14588:2001 PTI/13 FME/6 BS EN ISO 14589:2001 Blind rivets. Mechanical testing CORRIGENDUM 1 AMD BS EN ISO 14589:2001 BS EN ISO 15973:2001 Closed and blind rivets with break pull mandrel and protruding head. AIA/St CORRIGENDUM 1 AMD BS EN ISO 15973:2001 BS EN ISO 15974:2001 Closed and blind rivets with break pull mandrel and countersunk head. AIA/St CORRIGENDUM 1 AMD BS EN ISO 15974:2001 BS EN ISO 15975:2002 Closed end blind rivets with break pull mandrel and protruding head. AI/AIA CORRIGENDUM 2 AMD BS EN ISO 15975:2002 Also incorporates Corrigendum 1. BS EN ISO 15976:2002 Closed end blind rivets with break pull mandrel and protruding head. St/St CORRIGENDUM 2 AMD BS EN ISO 15976:2002 Also incorporates Corrigendum 1. FME/6 FME/6 FME/6 FME/6 FME/6 Page 14 of 65

15 BS EN ISO 15977:2002 Open end blind rivets with break pull mandrel and protruding head. AIA/St CORRIGENDUM 2 AMD BS EN ISO 15977:2002 Also incorporates Corrigendum 1. FME/6 BS EN ISO 15982:2002 Open end blind rivets with break pull mandrel and countersunk head. AIA/AIA CORRIGENDUM 2 AMD BS EN ISO 15982:2002 Also incorporates Corrigendum 1. FME/6 BS EN ISO 16584:2002 Open end blind rivets with break pull mandrel and protruding head. NiCu/St or NiCu/SSt CORRIGENDUM 2 AMD BS EN ISO 16584:2002 Also incorporates Corrigendum 1. FME/6 BS EN ISO 15978:2002 BS EN ISO 15983:2002 BS EN ISO 16585:2002 Open end blind rivets with break pull mandrel and countersunk head. AIA/St CORRIGENDUM 2 AMD Open end blind rivets with break pull mandrel and protruding head. A2/A2 CORRIGENDUM 2 AMD Closed end blind rivets with pull mandrel and protruding head. A2/SSt CORRIGENDUM 2 AMD BS EN ISO 15978:2002 Also incorporates Corrigendum 1. FME/6 BS EN ISO 15983:2002 Also incorporates Corrigendum 1. FME/6 BS EN ISO 16585:2002 Also incorporates Corrigendum 1. FME/6 BS EN ISO 15979:2002 Open end blind rivets with break pull mandrel and protruding head. St/St CORRIGENDUM 2 AMD BS EN ISO 15979:2002 Also incorporates Corrigendum 1. BS EN ISO 15980:2002 Open end blind rivets with break pull mandrel and countersunk head. St/St CORRIGENDUM 2 AMD BS EN ISO 15980:2002 Also incorporates Corrigendum 1. BS EN ISO 15981:2002 Open end blind rivets with break pull mandrel and protruding head. AIA/AIA CORRIGENDUM 2 AMD BS EN ISO 15981:2002 Also incorporates Corrigendum 1. FME/6 FME/6 FME/6 BS EN ISO 15984:2002 Open end blind rivets with break pull mandrel and countersunk head. A2/A2 CORRIGENDUM 2 AMD BS EN ISO 15984:2002 Also incorporates Corrigendum 1. BS EN ISO 16582:2002 Open end blind rivets with break pull mandrel and protruding head. Cu/St or Cu/Br or Cu/SSt CORRIGENDUM 2 AMD BS EN ISO 16582:2002 Also incorporates Corrigendum 1. BS EN ISO 16583:2002 Open end blind rivets with break pull mandrel and countersunk head. Cu/St or Cu/Br or Cu/SSt CORRIGENDUM 2 AMD BS EN ISO 16583:2002 Also incorporates Corrigendum 1. FME/6 FME/6 FME/6 BS EN 50241:- Specification for open path apparatus for the detection of combustible or toxic gases and vapours BS EN :1999 General requirements and test methods AMENDMENT 1 AMD BS EN :1999 GEL/31, GEL/31/19 BS EN 60335:- Specification for safety of household and similar electrical appliances BS EN :- Particular requirements BS EN :2001 Particular requirements for tumble dryers CORRIGENDUM 3 AMD BS EN :2001 CPL/61, CPL/61/14 Also incorporates Amendment 1 and Corrigenda 1 & 2. AMENDMENTS TO BRITISH STANDARDS Page 15 of 65

16 BS EN :2002 Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements AMENDMENT 1 AMD BS EN :2002 CPL/61, CPL/61/5 BS EN 60368:- Piezoelectric filters BS EN :2000 Generic specification AMENDMENT 1 AMD BS EN : members non-members Also incorporates Corrigendum 1. BS EN 60794:- Optical fibre cables BS EN :- Generic specification BS EN :2002 General CORRIGENDUM 1 AMD EPL/49 BS EN : members non-members GEL/86, GEL/86/1 BS EN :2003 Basic optical cable test procedures AMENDMENT 1 AMD BS EN : members non-members GEL/86, GEL/86/1 BS EN 61000:- Electromagnetic compatibility (EMC) BS EN :- Generic standards BS EN :2001 Emission standard for residential, commercial and light-industrial environments AMENDMENT 1 AMD BS EN :2001 GEL/210, GEL/210/12 BS EN 61558:- Safety of power transformers, power supply units and similar devices BS EN :2001 Particular requirements for isolating transformers for the supply of medical locations CORRIGENDUM 2 AMD BS EN :2001 Also incorporates Corrigendum 1. BS EN 61810:- Electromechanical non-specified time all-or-nothing relays BS EN :2004 General and safety requirements CORRIGENDUM 1 AMD BS EN : members non-members BS ISO 5599:- Pneumatic fluid power. Five-port directional control valves BS ISO :2001 Mounting interface surfaces with optional electrical connector AMENDMENT 1 AMD BS ISO :2001 BS ISO 17294:- Water quality. Application of inductively coupled plasma mass spectrometry (ICP-MS) PEL/96 EPL/94 MCE/18 BS ISO :2003 (BS EN ISO :2004, BS :2004) Determination of 62 elements AMENDMENT 1 AMD BS EN ISO :2004 EH/3, EH/3/2 Renumbered as dual-numbered standard BS EN ISO :2004, BS :2004. PAS 65:2004 Management of public swimming pools. General management. Code of practice AMENDMENT 1 AMD PAS 65:2004 UPDATED BRITISH STANDARDS BS 460:2002 Cast iron rainwater goods. Specification AMENDMENT 1 BS 460:2002 BS 4177:1992 Specification for cooker control units AMENDMENT 3 ZZ/1 PSE/10 BS 4177: members non-members PEL/23 Also incorporates Amendments 1 and 2. BS 5763:- Methods for microbiological examination of food and animal feeding stuffs UPDATED BRITISH STANDARDS Page 16 of 65

17 BS :- Microbiology of food and animal feeding stuffs. Horizontal method for the detection and enumeration of $7IListeria monocytogenes$7r. Detection method See BS EN ISO BS 6765:- Leisure accommodation vehicles. Caravans BS :1987 Specification for undergear AMENDMENT 2 BS : members non-members Also incorporates Amendment 1. BS 7363:1990 Method for bead-on-plate (BOP) test for welds AMENDMENT 2 BS 7363:1990 Also incorporates Amendment 1. BS EN 772:- Methods of test for masonry units BS EN :2000 Determination of water absorption of aggregate concrete, manufactured stone and natural stone masonry units due to capillary action and the initial rate of water absorption of clay masonry units AMENDMENT 1 AUE/8 WEE/2 BS EN :2000 B/519, B/519/1 BS EN 934:- Admixtures for concrete, mortar and grout BS EN 934-2:2001 Concrete admixtures. Definitions, requirements, conformity, marking and labelling AMENDMENT 1 BS EN 934-2:2001 B/517, B/517/3 BS EN 1015:- Methods of test for mortar for masonry BS EN :2000 Determination of water-soluble chloride content of fresh mortars AMENDMENT 1 BS EN :2000 B/519, B/519/2 BS EN :1999 Determination of water vapour permeability of hardened rendering and plastering mortars AMENDMENT 1 BS EN :1999 B/519, B/519/2 BS EN ISO 11290:- Microbiology of food and animal feeding stuffs. Horizontal method for the detection and enumeration of Listeria monocytogenes BS EN ISO :1997 (BS :1997) Detection method AMENDMENT 1 BS EN ISO :1997 AW/9 BS EN 60400:2000 Lampholders for tubular fluorescent lamps and starterholders AMENDMENT 2 BS EN 60400: members non-members CPL/34/2 Also incorporates Amendment 1 and Corrigendum 1. BS EN 61347:- Lamp controlgear BS EN :2001 Particular requirements for a.c. supplied electronic ballasts for fluorescent lamps AMENDMENT 1 BS EN :2001 CPL/34, CPL/34/3 Also incorporates Corrigendum 1. BS AU 50:- Tyres and wheels BS AU 50-3:- Valves BS AU e:2004 Dimensions, designation, valve pressure ratings by use and torque for clamp-in valves AMENDMENT 1 BS AU e: members non-members SPECIAL ANNOUNCEMENTS AUE/4 SPECIAL ANNOUNCEMENTS Page 17 of 65

18 CALL FOR EXPERTS / MEMBERS BSI Technical committee B/201, Fences and Gates, is seeking to expand its membership. Currently, the work of the committee includes projects on revising BS 3470:1975 Specification for field gates and posts, BS 4008:1991 Specification for cattle grids, BS 5709:2001 Gaps, gates and stiles. Specification, and the BS 1722 series Fences. Prospective members from trade associations, government and professional bodies or other interested parties wishing to nominate experts to join the committee should contact its programme manager (below). Prospective members must have the means to receive documents electronically. Contact: Nyomee Kyaw nyomee.kyaw@bsi-global.com B/201 BS EN 845:- Specification for ancillary components for masonry In 2003 a number of harmonised European Standards for masonry products were published by BSI and at the end of January 2005 the 12-month period of coexistence will be completed. At this time a number of existing s will be superseded and withdrawn at the end of the transitional arrangements. The relevant BS EN s and the corresponding standards due to be withdrawn are listed below. BS EN 845-1:2003 Ties, tension straps, hangers and brackets BS EN 845-2:2003 Lintels BS EN 845-3:2003 Bed joint reinforcement of steel meshwork which will supersede BS 1243:1978 Specification for wall ties for cavity wall construction BS :1990 Joist hangers. Part 1. Specification for joist hangers for building into walls of domestic dwellings DD 140-1:1986 Wall ties. Part 1. Method for test for mortar joint and timber frame connections BS :1983 Lintels. Part 2. Specification for prefabricated lintels Some of the standards which are being withdrawn contain guidance which although useful is not included in the corresponding European Standard. Work is in hand to ensure that such material is incorporated either in National Annexes to the Standards or in relevant Codes of Practice. Contact: David Fisher david.fisher@bsi-global.com B/519 BS EN 998:- Specification for mortar for masonry In 2003 a number of harmonised European Standards for masonry products were published by BSI and at the end of January 2005 the 12-month period of coexistence will be completed. At this time a number of existing s will be superseded and withdrawn at the end of the transitional arrangements. The relevant BS EN s and the corresponding standards due to be withdrawn are listed below. BS EN 998-1:2003 Rendering and plastering mortar & BS EN 998-2:2003 Masonry mortar which will supersede BS 4721:1981 Specification for ready-mixed building mortars & BS :1980 Specification for dry packaged cementitious mixes. Part 2. Pre-packed mortar mixes Some of the standards which are being withdrawn contain guidance which although useful is not included in the corresponding European Standard. Work is in hand to ensure that such material is incorporated either in National Annexes to the Standards or in relevant Codes of Practice. Contact: David Fisher david.fisher@bsi-global.com B/519 BS EN ISO 16888:2003/prA1 Water quality. Determination of six complexing agents. Gas-chromatographic method CEN proposes adopting the minor technical amendment made by ISO earlier this year to ISO 16588:2002. Consequently an approval-to-publish text of this amendment has been received, but with no public enquiry draft. This draft amendment text is therefore being issued and circulated to the relevant BSI committee, the text of which may be obtained on request from the committee secretary (below). Contact: Roger Wellings roger.wellings@bsi-global.com EH/3/2 SPECIAL ANNOUNCEMENTS Page 18 of 65