European standard for general audit BS EN Energy audit

Transcription

1 Read online: shop.bsigroup.com/usonline1210 October 2012 European standard for general audit BS EN Energy audit First step towards reducing energy consumption and increasing energy efficiency Contents 4 Quick Reference Guide 12 New and revised British Standards 12 BS EN publications 17 British Standard implementations 20 Published Documents 21 Publicly Available Specifications 21 Specialist books from BSI 21 Corrigenda to British Standards 22 Updated British Standards 23 Special Announcements 23 British Standards proposed for confirmation and confirmed 34 British Standards proposed for withdrawal and withdrawn 35 British Standards under review 35 New work started 41 Draft British Standards 45 Documents not issued as DPCs 46 CEN publications 47 CENELEC publications 48 IEC publications 52 ISO publications *See back cover for more information

2 Welcome to Update Standards In these pages you ll find details of new, revised, draft and withdrawn standards and publications from the last month. Update Standards is designed to help you keep track of the standards you use, and discover new standards that could help your organization. Get free expert help from our Knowledge Centre The Knowledge Centre is a team of information professionals, available 9am-5pm Mon-Fri to help with your standards questions. They can perform advanced subject searches, and quickly identify international equivalents from over 200 standards organizations across 23 countries. They can also send you the scope and contents of standards before your buy, so you can be sure of what you re receiving. Access to the Knowledge Centre is a benefit of being a member of BSI. Contact the Knowledge Centre Phone Fax knowledgecentre@bsigroup.com How to order The standards, publications and conferences featured in this magazine are available online or from our customer services team. Customer services is open from 9am to 5pm, Monday to Friday. Phone Website shop.bsigroup.com/us1210 orders@bsigroup.com to place an order. info@bsigroup.com to make an enquiry Fax Post BSI Customer Services 389 Chiswick High Road London W4 4AL bsigroup.com/customerservicesus1210 BSI Training BSI's training courses are designed with the needs of our customers in mind from the largest organisations to smaller start-ups - we have a course to suit you. Take a look today. We also offer all of our public courses as bespoke in-company training at your company s premises should this be more convenient for you. To download the BSI Training Catalogue please visit our website: bsigroup.co.uk/training

3 BSI Events in 2012 BSI Customer Sustainability Events 23 October, BSI Milton Keynes 26 October, BSI Chiswick BSI are constantly introducing innovative ways to tackle the ever changing issues of sustainability. For the world and the world of business, today and tomorrow. BSI is proud to have produced the world s first environmental management standard, now ISO 14001, back in Since then we have led the way with ongoing developments in environmental management, energy management, corporate social responsibility, product carbon footprinting and biodiversity. These two unique events give you the opportunity to hear from experts from BSI and industry about the latest issues surrounding energy management, the Green Deal, ISO and ISO Join us to hear how BSI`s sustainability portfolio is helping businesses save money, energy and the environment... helping you tackle tomorrow`s sustainability issues today! Read more and book your place bsigroup.com/conferences Health & Safety - North 10 & 11 October, The Reebok Stadium, Bolton The Health and Safety Regional Events series of events has been developed to suit anyone responsible for health and safety at work. Quality and accessibility are essential which is why our exhibitions and conferences are FREE to attend and the vendors you will meet are among the most respected currently operating in the UK and Ireland. In partnership with The British Safety Council, coupled with support from IIRSM, Safety Groups UK and many other key stakeholders in the UK safety industry have all helped to create an outstanding experience for our visitors. Accessing your regional Health and Safety Event is FREE but the knowledge and experience you will gain could prove invaluable. Visit us on stand 98 healthandsafetyevents.co.uk BCM World Conference and Exhibition & 8 November, Olympia, London The BCM World Conference and Exhibition is the premier event in the global industry calendar featuring a vibrant Conference that is explicitly structured to provide value for all levels of business continuity experience and, of course, the bustling Exhibition, with some 50 leading product and service providers supported by an extensive, educational seminar programme across the two days. The demand for BCM has never been greater, whether driven by the need to manage crises more effectively or to provide assurance that your organization is a reliable business partner to key stakeholders. With ever increasing global complexity causing headaches for business leaders and policy makers alike, BCM provides a unique perspective to support better decision making about risk and uncertainty. Join us and fellow practitioners this November to learn and share and to strengthen the voice of BCM. Visit us on stand 3 bcm2012.com No longer require a paper copy of Update Standards? Please help us reduce waste by letting us know. Phone membership@bsigroup.com New draft for comment Design of accessible and adaptable general needs housing Code of practice (BS 9266) We invite your comments on the Draft for Public Consultation (DPC) on this new standard, it explains how, by following the key principles of inclusive design, general needs housing can be made sufficiently flexible and convenient to meet the existing and changing needs of more households, and so give people more choice over where they live. The draft will be available for comment until 31st October 2012: drafts.bsigroup.com/home/details/46922 Standards and publications may also be ordered via the BSI shop at shop.bsigroup.com *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call BSI British Standards Institution 2012

4 British Standards Quick Reference Guide The following British Standards are listed or referred to in this issue of Update Standards with the exception of those in New Work Started. Quick reference guide Building and civil engineering BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS , 34 BS BS BS BS BS BS BS BS BS BS BS BS BS BS EN BS EN BS EN BS EN BS EN BS EN , 14 BS EN BS EN BS EN BS EN BS EN BS EN ISO BS ISO PD PAS Consumer products and services BS BS BS BS BS BS BS BS BS BS BS 4500A...32 BS 4500B...33 BS EN BS EN ISO , 34 BS EN ISO BS EN BS EN ISO , 34 BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO DD ISO/TS , 35 PD PD ISO/TS PD ISO/TS , 35 PD ISO/TS Electrotechnical BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS , 34 BS BS BS BS BS BS , 22 BS BS BS BS 9210 N BS 9210 N BS 9220 N BS 9220 N BS 9220 N BS 9220 N DD CEN ISO/TS , 35 BS EN BS EN ISO , 35 BS EN BS EN , 35 BS EN , 22, 35 BS EN BS EN BS EN , 34 BS EN , 35 BS EN BS EN BS EN BS EN , 16 BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN , 35 BS EN BS EN BS EN , 35 BS ISO BS ISO , 34 BS IEC BS IEC BS IEC DD IEC/PAS , 35 DD CLC/TS , 35 PD IEC/TS PD IEC/TS Engineering BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS Prices may be subject to change. Update Standards October 2012

5 British Standards Quick Reference Guide continued... BS BS , 34 BS BS BS BS BS BS BS , 28 BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS , 34 BS BS BS BS BS BS BS BS BS BS BS , 34 BS BS BS BS EN BS EN , 34 BS EN BS EN BS EN BS EN BS EN BS EN ISO , 34 BS EN BS EN ISO BS EN ISO BS EN BS EN , 34 BS EN BS EN BS EN BS EN ISO BS EN ISO , 34 BS EN BS ISO BS ISO BS ISO BS ISO , 34 BS ISO , 34 BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO , 34 BS ISO BS ISO , 35 DD ISO/PAS , 35 PD CEN/TR , 35 PD PD PD PD PD PD CR , 35 PD ISO/TS BS 2A BS 6F BS 2F BS HR BS MA BS MA BS SP BS SP BS SP BS SP 59 and SP BS SP 66 and BS SP BS AU BS AU 138b...34 BS AU 144f...34 Health and environment BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS , 30 BS BS BS BS BS , 31 BS BS BS BS BS BS BS BS BS BS BS EN ISO , 22 BS EN ISO , 34 BS EN ISO BS EN BS EN BS EN BS EN BS EN BS EN ISO BS EN , 34 BS ISO BS ISO BS ISO BS ISO PD PD PD PD Information systems BS BS BS BS BS EN ISO , 34 BS ISO/IEC BS ISO/IEC , 34 BS ISO/IEC BS ISO/IEC BS ISO/IEC , 22 BS ISO/IEC BS ISO/IEC PD PD ISO/IEC TR PD ISO/IEC TR Management systems BS BS BS BS , 34 BS BS BS , 34 BS BS EN BS ISO , 34 BS ISO , 34 BS ISO PD PD PD PD PD ISO/TR PD ISO/TR PD ISO/IEC TS Materials and chemicals BS BS Update Standards October 2012 Prices may be subject to change. 5

6 British Standards Quick Reference Guide continued... BS BS BS BS BS BS BS BS BS BS BS BS BS , 24, 34 BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS EN BS EN BS EN ISO BS EN ISO BS EN ISO BS EN BS EN ISO , 34 BS EN ISO BS EN ISO BS EN ISO , 34 BS EN ISO , 34 BS EN ISO BS EN BS EN BS EN ISO BS EN BS EN BS EN ISO BS EN ISO DD ENV , 34 DD ENV , 34 DD ENV , 34 DD ENV , 34 BS ISO BS ISO , 34 BS ISO BS ISO , 35 BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO PD CEN/TS , 34 PD CEN/TS , 34 PD CEN/TS , 34 PD CEN/TS , 34 PD CEN/TS PD CEN ISO/TS PD CEN ISO/TS PD PD PD ISO/TS PD ISO/TS PD ISO/TR BS AU 110a...34 Alpha-numeric sequence of British Standards quoted in this issue BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS , 24, 34 BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS Prices may be subject to change. Update Standards October 2012

7 British Standards Online A faster, easier way to work with standards BSOL is the online standards database that makes using standards easier and more cost effective. With it, you can access over 55,000 British, adopted European and International Standards from your desktop. It s available 24/7 and revised every single day so you ll always be completely up to date. Save time With powerful search, alerts and links to related and superseded documents, finding the right document has never been easier. Reduce risk Having guaranteed access to the latest standards helps makes compliance with contracts or audit requirements simple. Start today Read case studies and arrange your free trial at: shop.bsigroup.com/bsol Get everything you need for less Choose from 53 subject related modules, or build your own collection with the standards you already use. Subscribing by subject area makes it affordable to have access to every standard in your industry. To contact us visit shop.bsigroup.com/bsolus1210 or contact Customer Services quoting marketing reference code BSOLM-US1210 T F orders@bsigroup.com shop.bsigroup.com/bsolus1210 Standards and publications may also be ordered via the BSI shop at shop.bsigroup.com *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0) BSI British Standards Institution 2012

8 Alpha-numeric Sequence of British Standards continued... BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS , 34 BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS , 28 BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS , 30 BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS , 31 BS , 34 BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS , 34 BS BS BS BS , 22 BS BS BS BS , 34 BS , 34 BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS , 34 BS BS BS BS BS BS BS BS BS BS BS 9210 N BS 9210 N BS 9220 N BS 9220 N BS 9220 N BS 9220 N BS BS 4500A...32 BS 4500B...33 BIP BIP BIP DD CEN ISO/TS , 35 BS EN BS EN BS EN BS EN BS EN , 34 BS EN BS EN BS EN BS EN BS EN ISO BS EN ISO BS EN ISO BS EN BS EN BS EN BS EN ISO , 34 BS EN BS EN ISO BS EN BS EN ISO BS EN ISO , 34 BS EN BS EN BS EN ISO , 22 8 Prices may be subject to change. Update Standards October 2012

9 NEW PD 5500:2012 Specification for unfired fusion welded pressure vessels Get the latest PD 5500:2012 specification for unfired fusion welded pressure vessels. This new and assessing pressure vessels. to BS 5500 or PD What s new? PD 5500:2012 outlines the latest amendments to the specification up to and including those published in September It also includes details of enquiry cases and will be updated every three years. Your PD 5500 subscription includes free updates on further amendments. The start of new three-year cycle will include updates and new enquiry cases. The three-year subscription to PD 5500 includes free regular updates as amendments are made to the specification. Key 2012 revisions include: for large tube diameters in the evaluation of test pressure Key features: for PED compliance made during last three years shop.bsigroup.com/pd5500us1210 To contact us visit or contact PD5500-US1210 T F shop.bsigroup.com/pd5500us1210 Standards and publications may also be ordered via the BSI shop at shop.bsigroup.com *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0) BSI British Standards Institution 2012

10 Alpha-numeric Sequence of British Standards continued... BS EN ISO , 34 BS EN ISO , 34 BS EN ISO BS EN ISO , 34 BS EN ISO , 34 BS EN ISO BS EN BS EN ISO BS EN ISO BS EN BS EN , 14 BS EN , 34 BS EN ISO BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN ISO BS EN BS EN BS EN BS EN ISO , 34 BS EN ISO BS EN BS EN BS EN BS EN BS EN BS EN BS EN ISO BS EN ISO , 34 BS EN ISO BS EN ISO , 35 BS EN ISO BS EN ISO , 34 BS EN ISO BS EN , 34 BS EN BS EN , 35 BS EN , 22, 35 BS EN BS EN BS EN , 34 BS EN , 35 BS EN BS EN BS EN BS EN , 16 BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN , 35 BS EN BS EN BS EN , 35 DD ENV , 34 DD ENV , 34 DD ENV , 34 DD ENV , 34 BS ISO BS ISO , 34 BS ISO BS ISO , 35 BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO , 34 BS ISO , 34 BS ISO BS ISO BS ISO BS ISO , 34 BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO/IEC BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO , 34 BS ISO BS ISO BS ISO BS ISO BS ISO/IEC , 34 BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO/IEC BS ISO BS ISO/IEC BS ISO BS ISO/IEC , 22 BS ISO , 34 BS ISO BS ISO BS ISO/IEC BS ISO BS ISO/IEC BS ISO , 35 BS ISO BS IEC BS IEC BS IEC DD ISO/PAS , 35 DD ISO/TS , 35 DD IEC/PAS , 35 DD CLC/TS , 35 PD PD CEN/TR , 35 PD CEN/TS , 34 PD CEN/TS , 34 PD CEN/TS , 34 PD CEN/TS , 34 PD CEN/TS PD CEN ISO/TS PD CEN ISO/TS PD PD PD PD PD PD PD PD PD PD PD PD PD PD PD PD PD PD CR , 35 PD ISO/TS PD ISO/TS PD ISO/TR PD ISO/TR PD ISO/TS PD ISO/TR PD ISO/IEC TS PD ISO/IEC TR PD ISO/TS PD ISO/TS , 35 PD ISO/TS PD ISO/IEC TR PD IEC/TS PD IEC/TS BS 2A BS 6F BS 2F BS HR BS MA BS MA BS SP BS SP BS SP BS SP 59 and SP BS SP 66 and BS SP BS AU BS AU 110a...34 BS AU 138b...34 BS AU 144f...34 PAS PAS Prices may be subject to change. Update Standards October 2012

11 NEW BS ISO The new face of sustainable events New International standard helps you cut environmental impact BS 8901:2009 Specification for a sustainability management system for events has helped events promoters, venues, affiliates and organizations improve operations, save money and provide the best event experience possible for nearly half a decade. Now ISO have taken the standard on board, creating ISO 20121:2012 Event sustainability management systems. Requirements with guidance for use. This new standard builds from and improves upon its predecessor to not only increase efficiency for anyone involved in events from large scale to small but also expand their view of what it means to create and manage an event sustainably. Big names have already begun using its guidance, with the London 2012 Olympics topping the list. ISO brings you even more useful guidance, like how to effectively tailor your marketing communications. It sets a framework for tackling issues such as costs, carbon emissions and waste. It can also help you to manage the biodiversity impacts of venues and achieve a diverse and inclusive workforce. It is flexible to apply and integrates easily into existing systems. It applies to any organization working within the event industry If you re involved with events, this standard can help make your events more popular, run more smoothly and reduce costs. To read more and buy your copy, visit: shop.bsigroup.com/bsiso20121us1210 To contact us visit shop.bsigroup.com/bsiso20121us1210 or contact Customer Services quoting marketing reference code ISO20121-US1210 T F orders@bsigroup.com shop.bsigroup.com/bsiso20121us1210 Standards and publications may also be ordered via the BSI shop at shop.bsigroup.com *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0) BSI British Standards Institution 2012

12 British Standards BRITISH STANDARDS The following British Standard publications are available from BSI Customer Services (see How to order on page 2). The publications listed below are new and revised British Standards that were made available last month. An existing BSI publication bearing a number identical to one announced below is automatically withdrawn unless stated otherwise. In all other cases of supersession, details are given and a corresponding entry appears in the British Standards withdrawn section. BRITISH STANDARD IMPLEMENTATIONS WILL BE SUPPLIED IN PREFERENCE TO EUROPEAN OR INTERNATIONAL STANDARDS, UNLESS OTHERWISE REQUESTED. Please order by the British Standard reference not the ISBN number. BS 2000 series standards are also available from: Library of the Energy Institute 61 New Cavendish Street London W1G 7AR Tel: Fax: lis@energyinst.org.uk For this series, member pricing is applicable to BSI and Energy Institute members. BS :2011 (CD-ROM) Library objects for architecture, engineering and construction. Recommended 2D symbols of building elements for use in building information modelling ISBN members, non-members B/555 BS :2012 Design for manufacture, assembly, disassembly and end-of-life processing (MADE). Specification for reworking and remarketing of computing hardware ISBN TDW/4/7 To order visit BS EN PUBLICATIONS The following are British Standard implementations of the English language versions of European Standards (ENs). BSI has an obligation to publish all ENs and to withdraw any conflicting British Standards. This has led to a series of standards, BS ENs, using the EN number. Note: The date referenced in the identifier is the date of the European standard. BS EN 303-5:2012 Heating boilers. Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kw. Terminology, requirements, testing and marking supersedes BS EN 303-5:1999 ISBN members, non-members RHE/10 BS EN 450-1:2012 Fly ash for concrete. Definition, specifications and conformity criteria supersedes BS EN 450-1:2005+A1:2007 ISBN members, non-members B/517/4 BS EN 480-8:2012 Admixtures for concrete, mortar and grout. Test methods. Determination of the conventional dry material content supersedes BS EN 480-8:1997 ISBN B/517/3 BS EN 846-5:2012 Methods of test for ancillary components for masonry. Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (couplet test) supersedes BS EN 846-5:2000 ISBN B/519/3 BS EN 846-6:2012 Methods of test for ancillary components for masonry. Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (single end test) supersedes BS EN 846-6:2000 ISBN B/519/3 BS EN 846-7:2012 Methods of test for ancillary components for masonry. Determination of shear load capacity and load displacement characteristics of shear ties and slip ties (couplet test for mortar joint connections) supersedes BS EN 846-7:2000 ISBN B/519/3 BS EN 890:2012 Chemicals used for treatment of water intended for human consumption. Iron (III) sulfate solution supersedes BS EN 890:2004 ISBN members, non-members CII/59 BS EN :2012 Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines. Tissue making machines ISBN members, non-members MCE/3/9 BS EN :2012 Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines. Coating machines ISBN members, non-members MCE/3/9 BS EN ISO 1140:2012 Fibre ropes. Polyamide. 3-, 4-, 8- and 12-strand ropes supersedes BS EN ISO 1140:2004 ISBN TCI/77 BS EN ISO 1141:2012 Fibre ropes. Polyester. 3-, 4-, 8- and 12-strand ropes supersedes BS EN ISO 1141:2004 ISBN TCI/77 BS EN ISO 1346:2012 Fibre ropes. Polypropylene split film, monofilament and multifilament (PP2) and polypropylene high-tenacity multifilament (PP3). 3-, 4-, 8- and 12-strand ropes supersedes BS EN ISO 1346:2004 ISBN TCI/77 12 Prices may be subject to change. Update Standards October 2012

13 BS EN 1906:2012 Building hardware. Lever handles and knob furniture. Requirements and test methods supersedes BS EN 1906:2010 ISBN members, non-members B/538/4 BS EN 1912:2012 Structural Timber. Strength classes. Assignment of visual grades and species supersedes BS EN 1912:2004+A4:2010 ISBN B/518 BS EN ISO :2012 Monolithic (unshaped) refractory products. Introduction and classification supersedes BS EN :2003 ISBN RPI/1 BS EN :2012 Aerospace series. Elements of electrical and optical connection. Test methods. Sinusoidal and random vibration supersedes BS EN :1998 ISBN ACE/6 BS EN ISO :2012 Paints and varnishes. Determination of resistance to liquids. Method using an absorbent medium supersedes BS EN ISO :2007 ISBN STI/10 BS EN :2012 Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures. 65ºC to 175ºC continuous, 200ºC continuous, 260ºC peak. Square flange receptacle. Product standard supersedes BS EN :2006 ISBN ACE/6 BS EN :2012 Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures. 65ºC to 175ºC continuous, 200ºC continuous, 260ºC peak. Hermetic square flange receptacle. Product standard supersedes BS EN :2006 ISBN ACE/6 BS EN ISO :2012 Plastics. Epoxy resins. Preparation of test specimens and determination of properties of crosslinked epoxy resins supersedes BS EN ISO :2000 ISBN PRI/42 BS EN :2012 Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175ºC (or 125ºC) continuous. Size 4 receptacle for rack and panel application. Product standard ISBN ACE/6 BS EN :2012 Aerospace series. Welded and brazed assemblies for aerospace construction. Joints of metallic materials by electron beam welding. Quality of welded assemblies ISBN members, non-members ACE/61 BS EN ISO 5923:2012 Equipment for fire protection and fire fighting. Fire extinguishing media. Carbon dioxide supersedes BS EN 25923:1994 ISBN FSH/18/6 BS EN ISO :2012 Paints and varnishes. Drying tests. Print-free test supersedes BS EN ISO 3678:1995 ISBN STI/10 BS EN ISO :2012 Hand-held non-electric power tools. Safety requirements. Grinders supersedes BS EN 792-7:2001+A1:2008 ISBN members, non-members MCE/8/-/2 BS EN ISO 11747:2012 Rice. Determination of rice kernel resistance to extrusion after cooking ISBN AW/4 BS EN :2012 Gas infrastructure. Pipelines for maximum operating pressure up to and including 16 bar. General functional requirements supersedes BS EN :2000 ISBN members, non-members GSE/33 BS EN :2012 Gas infrastructure. Pipelines for maximum operating pressure up to and including 16 bar. Specific functional requirements for polyethylene (MOP up to and including 10 bar) supersedes BS EN :2000 ISBN GSE/33 BS EN :2012 Gas infrastructure. Pipelines for maximum operating pressure up to and including 16 bar. Specific functional requirements for renovation supersedes BS EN :2000 ISBN members, non-members GSE/33 BS EN ISO 12211:2012 Petroleum, petrochemical and natural gas industries. Spiral plate heat exchangers ISBN members, non-members PSE/17/-/6 BS EN ISO 12212:2012 Petroleum, petrochemical and natural gas industries. Hairpin-type heat exchangers ISBN members, non-members PSE/17/-/6 BS EN 12327:2012 Gas infrastructure. Pressure testing, commissioning and decommissioning procedures. Functional requirements supersedes BS EN 12327:2000 ISBN GSE/33 BS EN :2012 Bituminous mixtures. Test methods for hot mix asphalt. Soluble binder content supersedes BS EN :2005 ISBN members, non-members B/510/1 BS EN :2012 Bituminous mixtures. Test methods for hot mix asphalt. Marshall test supersedes BS EN :2004 ISBN B/510/1 BS EN :2012 Bituminous mixtures. Test methods for hot mix asphalt. Binder content by ignition supersedes BS EN :2004 ISBN B/510/1 Update Standards October 2012 Prices may be subject to change. 13

14 BS EN Publications continued... BS EN :2012 Bituminous mixtures. Test methods for hot mix asphalt. In situ drainability supersedes BS EN :2005 ISBN B/510/1 BS EN ISO 13017:2012 Dentistry. Magnetic attachments ISBN CH/106/2 BS EN :2012 Unbound and hydraulically bound mixtures. Test method for the determination of California bearing ratio, immediate bearing index and linear swelling supersedes BS EN :2004 ISBN B/510/4 BS EN :2012 Fertilizers. Determination of chelating agents in fertilizers by chromatography. Determination of Fe chelated by o,o-eddha, o,o-eddhma and HBED by ion pair chromatography supersedes BS EN :2007 ISBN CII/37 BS EN :2012 Metal industrial piping. Design and calculation supersedes BS EN :2002+A4:2010 ISBN members, non-members PVE/10 BS EN :2012 Concrete pavements. Test methods for the determination of wear resistance of concrete pavements to studded tyres supersedes BS EN :2004 ISBN B/510/3 BS EN 14211:2012 Ambient air. Standard method for the measurement of the concentration of nitrogen dioxide and nitrogen monoxide by chemiluminescence supersedes BS EN 14211:2005 ISBN members, non-members EH/2/3 BS EN 14212:2012 Ambient air. Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence supersedes BS EN 14212:2005 ISBN members, non-members EH/2/3 BS EN 14491:2012 Dust explosion venting protective systems supersedes BS EN 14491:2006 ISBN members, non-members EXL/23 BS EN 14602:2012 Footwear. Test methods for the assessment of ecological criteria supersedes BS EN 14602:2004 ISBN TCI/69 BS EN 14625:2012 Ambient air. Standard method for the measurement of the concentration of ozone by ultraviolet photometry supersedes BS EN 14625:2005 ISBN members, non-members EH/2/3 BS EN ISO :2012 Cleanrooms and associated controlled environments. Classification of surface cleanliness by particle concentration ISBN members, non-members LBI/30 BS EN :2012 Mountaineering equipment. Braking devices. Braking devices with manually assisted locking, safety requirements and test methods ISBN SW/136/5 BS EN :2012 Mountaineering equipment. Braking devices. Manual braking devices, safety requirements and test methods ISBN SW/136/5 BS EN :2012 Extended application of results from fire resistance tests. Non-loadbearing ceilings. Metal sandwich panel construction ISBN FSH/22/-/7 BS EN :2012 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware. Fire resistance of hinged and pivoted timber doorsets and openable timber framed windows ISBN members, non-members FSH/22/-/5 BS EN ISO :2012 Indoor air. Sampling strategy for carbon dioxide (CO 2 ) ISBN EH/2/3 BS EN 16037:2012 Chemicals used for treatment of water intended for human consumption. Sodium hydrogen sulfate ISBN CII/59 BS EN 16038:2012 Chemicals used for treatment of water for swimming pools. Sodium hydrogen sulfate ISBN CII/59 BS EN 16085:2012 Conservation of Cultural property. Methodology for sampling from materials of cultural property. General rules ISBN B/560 BS EN 16095:2012 Conservation of cultural property. Condition recording for movable cultural heritage ISBN B/560 BS EN 16096:2012 Conservation of cultural property. Condition survey and report of built cultural heritage ISBN B/560 BS EN 16212:2012 Energy Efficiency and Savings Calculation, Topdown and Bottom-up Methods ISBN members, non-members SEM/1/2 BS EN ISO :2012 Building automation and control systems. Data communication protocol supersedes BS EN ISO :2010 ISBN members, non-members RHE/16 14 Prices may be subject to change. Update Standards October 2012

15 BS EN ISO :2012 Geometrical product specifications (GPS). Filtration. Linear profile filters: Gaussian filters supersedes BS EN ISO 11562:1997 ISBN members, non-members TDW/4 BS EN ISO 17131:2012 Leather. Identification of leather with microscopy ISBN TCI/69 BS EN ISO 17263:2012 Intelligent transport systems. Automatic vehicle and equipment identification. System parameters supersedes DD CEN ISO/TS 17263:2003 ISBN EPL/278 BS EN ISO 17556:2012 Plastics. Determination of the ultimate aerobic biodegradability of plastic materials in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved supersedes BS EN ISO 17556:2004 ISBN members, non-members PRI/21 BS EN ISO :2012 Liquid pumps and installation. General terms, definitions, quantities, letter symbols and units. Liquid pumps supersedes BS EN 12723:2000 ISBN members, non-members MCE/6 BS EN ISO :2012 Liquid pumps and installation. General terms, definitions, quantities, letter symbols and units. Pumping System ISBN members, non-members MCE/6 BS EN :2012 Communication cables. Specifications for test methods. Environmental test methods. Circuit integrity under fire conditions ISBN EPL/46 BS EN :2012 Rotating electrical machines. Functional evaluation of insulation systems. Test procedures for form-wound windings. Evaluation of thermomechanical endurance of insulation systems supersedes DD CLC/TS :2004 ISBN PEL/2 BS EN :2012 Explosive atmospheres. Caplights for use in mines susceptible to firedamp. Performance and other safety-related matters supersedes BS EN :2006 ISBN EXL/31 BS EN :2012 Specifications for particular types of winding wires. Polyester glass fibre wound minimum class 155 resin or varnish impregnated or not impregnated, bare or enamelled, rectangular copper wire, temperature index 155 ISBN GEL/55 BS EN :2011 Industrial-process control valves. Noise considerations. Laboratory measurement of noise generated by hydrodynamic flow through control valves supersedes BS EN :1993 which remains current ISBN GEL/65/2 BS EN :2012 Combined flexible materials for electrical insulation. Definitions and general requirements supersedes BS EN :1996 which remains current ISBN GEL/15 BS EN :2011 Flexible insulating sleeving. Methods of test supersedes BS EN :1997 which remains current ISBN members, non-members GEL/15/5 BS EN :2011 Flexible insulating sleeving. Specifications for individual types of sleeving. Sheets 116 and 117: Extruded polychloroprene, general purpose supersedes BS EN and 117:2003 ISBN GEL/15/5 BS EN :2011 Flexible insulating sleeving. Specifications for individual types of sleeving. Sheet 205: Heatshrinkable chlorinated polyolefin sleeving, flame retarded, nominal shrink ratio 1,7:1 and 2:1 ISBN GEL/15 BS EN :2011 Flexible insulating sleeving. Specifications for individual types of sleeving. Sheet 247: Heatshrinkable polyolefin sleeving, dual wall, not flame retarded, thick and medium wall ISBN GEL/15 BS EN :2012 Fire hazard testing. Terminology concerning fire tests for electrotechnical products supersedes BS EN :2006 ISBN GEL/89 BS EN :2012 Household and similar electrical appliances. Test code for the determination of airborne acoustical noise. Particular requirements for washing machines and spin extractors supersedes BS EN :2001 which remains current ISBN CPL/59/1 BS EN :2012 Optical fibre cables. Indoor optical fibre cables. Detailed specification for simplex and duplex cables for use in premises cabling supersedes BS EN :2005 ISBN GEL/86/1 BS EN :2012 Optical fibre cables. Indoor optical fibre cables. Detailed specification for multi-fibre optical distribution cables for use in premises cabling supersedes BS EN :2006 ISBN GEL/86/1 BS EN :2012 Non-cellulosic papers for electrical purposes. Definitions and general requirements supersedes BS EN :1996 which remains current ISBN GEL/15 Update Standards October 2012 Prices may be subject to change. 15

16 BS EN Publications continued... BS EN :2011 Non-cellulosic papers for electrical purposes. Specifications for individual materials. Sheet 3: Unfilled aramid (aromatic polyamide) papers supersedes BS EN :2006 which remains current ISBN GEL/15/10 BS EN :2012 Winding wires. Test methods. Thermal properties supersedes BS EN :1998 ISBN GEL/55 BS EN :2012 Surface acoustic wave (SAW) filters of assessed quality. Guidelines for the use supersedes BS EN :2002 ISBN members, non-members EPL/49 BS EN :2012 Arc welding equipment. Welding power sources supersedes BS EN :2005 ISBN members, non-members WEE/6 BS EN :2012 Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for cabinet x-ray systems ISBN EPL/66 BS EN :2012 Connectors for electronic equipment. Product requirements. Circular connectors. Detail specification for M12 connectors with screwlocking supersedes BS EN :2008 ISBN members, non-members EPL/48 BS EN 61124:2012 Reliability testing. Compliance tests for constant failure rate and constant failure intensity supersedes BS EN 61124:2006 ISBN members, non-members DS/1 BS EN :2012 Printed board assembly products. Manufacturing description data and transfer methodology. Sectional requirements for implementation of printed board fabrication data description ISBN members, non-members EPL/501 BS EN :2012 Optical amplifiers. Generic specification supersedes BS EN :2006 ISBN members, non-members GEL/86/3 BS EN :2012 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Group delay, chromatic dispersion and phase ripple ISBN members, non-members GEL/86/2 BS EN :2012 Electrostatics. Standard test methods for specific applications. Electrostatic classification of flexible intermediate bulk containers (FIBC) supersedes BS EN :2005 ISBN members, non-members GEL/101 BS EN :2012 Electronic railway equipment. Train communication network (TCN). General architecture ISBN members, non-members GEL/9/-/4 BS EN :2012 Electronic railway equipment. Train communication network (TCN). Wire Train Bus (WTB) ISBN members, non-members GEL/9/-/4 BS EN :2012 Electronic railway equipment. Train communication network (TCN). Wire Train Bus conformance testing ISBN members, non-members GEL/9/-/4 BS EN :2012 Electronic railway equipment. Train communication network (TCN). Multifunction Vehicle Bus (MVB) ISBN members, non-members GEL/9/-/4 BS EN :2012 Electronic railway equipment. Train communication network (TCN). MVB (Multifunction Vehicle Bus) conformance testing ISBN members, non-members GEL/9/-/4 BS EN :2012 Electronic railway equipment. Train communication network (TCN). CANopen Consist Network (CCN) ISBN members, non-members GEL/9/-/4 BS EN :2012 Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces. Type LC connector family supersedes BS EN :2002 ISBN GEL/86/2 BS EN :2012 Surface mounted piezoelectric devices for frequency control and selection. Standard outlines and terminal lead connections. Plastic moulded enclosure outlines supersedes BS EN :1999 ISBN EPL/49 BS EN :2012 High-voltage switchgear and controlgear. Seismic qualification for gas-insulated switchgear assemblies for rated voltages above 52 kv supersedes BS EN :2007 ISBN PEL/17/1 BS EN :2012 Fuel cell technologies. Fuel cell modules supersedes BS EN :2004 ISBN members, non-members GEL/105 BS EN 62474:2012 Material declaration for products of and for the electrotechnical industry supersedes DD IEC/PAS 61906:2005 ISBN members, non-members GEL/ Prices may be subject to change. Update Standards October 2012

17 BS ENs IMPLEMENTED BY AMENDMENT For the standards listed below see also the Corrigenda to British Standards section of this issue of Update Standards. BS EN ISO :2012 Implants for surgery. Metallic materials. Unalloyed titanium CH/150/1 Implementation of European Standard EN ISO by amendment to BS ISO :1999 BS IMPLEMENTATIONS BS Implementations comprise the ISO or IEC text without any national deviation and with front and back cover indicating the UK committee responsible. No other information will normally be added. Note: The date referenced in the identifier is the date of the international standard. BS ISO 248-2:2012 Rubber, raw. Determination of volatile-matter content. Thermogravimetric methods using an automatic analyser with an infrared drying unit ISBN PRI/23 BS ISO 501:2012 Hard coal. Determination of the crucible swelling number supersedes BS :1991 ISBN PTI/16 BS ISO 1922:2012 Rigid cellular plastics. Determination of shear strength supersedes BS ISO 1922:2001 ISBN PRI/24 BS ISO :2012 Rubber, vulcanized or thermoplastic. Determination of permeability to gases. Differential-pressure methods Together with BS ISO :2012, it supersedes BS ISO 2782:2006 which is withdrawn ISBN PRI/22 BS ISO :2012 Rubber, vulcanized or thermoplastic. Determination of permeability to gases. Equalpressure method Together with BS ISO :2012, it supersedes BS ISO 2782:2006 which is withdrawn ISBN PRI/22 BS ISO 3517:2012 Essential oil of neroli (Citrus aurantium L., syn. Citrus amara Link, syn. Citrus bigaradia Loisel, syn. Citrus vulgaris Risso) ISBN AW/54 BS ISO 4138:2012 Passenger cars. Steady-state circular driving behaviour. Open-loop test methods supersedes BS ISO 4138:2004 ISBN AUE/15 BS ISO 4161:2012 Hexagon nuts with flange, style 2. Coarse thread supersedes BS ISO 4161:1999 ISBN FME/9/1 BS ISO :2012 Agricultural machinery. Safety. Large rotary mowers ISBN members, non-members AGE/32 BS ISO 4377:2012 Hydrometric determinations. Flow measurement in open channels using structures. Flat-V weirs supersedes BS ISO 4377:2002 ISBN members, non-members CPI/113/2 BS ISO 4656:2012 Rubber compounding ingredients. Carbon black. Determination of oil absorption number (OAN) and oil absorption number of compressed sample (COAN) supersedes BS ISO 4656:2007 ISBN PRI/50 BS ISO :2012 Metallic materials. Dynamic force calibration for uniaxial fatigue testing. Testing systems Together with BS ISO :2012, it supersedes BS :2004 which is withdrawn ISBN ISE/101/6 BS ISO :2012 Metallic materials. Dynamic force calibration for uniaxial fatigue testing. Dynamic calibration device (DCD) instrumentation Together with BS ISO :2012, it supersedes BS :2004 which is withdrawn ISBN ISE/101/6 BS ISO 5608:2012 Turning and copying tool holders and cartridges for indexable inserts. Designation supersedes BS :1997 ISBN BS ISO 6421:2012 Hydrometry. Methods for assessment of reservoir sedimentation ISBN members, non-members CPI/113 BS ISO :2012 Control charts. Acceptance control charts supersedes BS 7783:1994 ISBN SS/4 BS ISO :2012 Reciprocating internal combustion engines. Exhaust emission measurement. Test cycles and test procedures for test bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions supersedes BS ISO :2000 ISBN members, non-members MCE/14/-/3 BS ISO 8217:2012 Petroleum products. Fuels (class F). Specifications of marine fuels supersedes BS ISO 8217:2010 ISBN members, non-members PTI/2 BS ISO :2012 Endoscopes. Medical endoscopes and endotherapy devices. Basic requirements for medical endoscopes of water-resistant type ISBN CPW/172 BS ISO :2012 Road vehicles. Fuse-links. Fuse-links with bolt-in contacts (Type H and J) with rated voltage of 450 V ISBN AUE/16 Update Standards October 2012 Prices may be subject to change. 17

18 BS Implementations continued... BS ISO :2012 Optics and photonics. Optical coatings. Specific test methods supersedes BS ISO :2006 ISBN CPW/172 BS ISO 10663:2012 Hexagon nuts with flange, style 2. Fine pitch thread supersedes BS ISO 10663:1999 ISBN FME/9/1 BS ISO 11350:2012 Water quality. Determination of the genotoxicity of water and waste water. Salmonella/microsome fluctuation test (Ames fluctuation test) ISBN members, non-members EH/3/5 BS ISO :2012 Measurement of radioactivity in the environment. Air: radon-222. Continuous measurement method of the activity concentration ISBN NCE/2 BS ISO 12108:2012 Metallic materials. Fatigue testing. Fatigue crack growth method supersedes BS ISO 12108:2002 ISBN members, non-members ISE/101/6 BS ISO 12152:2012 (BS :2012) Lubricants, industrial oils and related products. Determination of the foaming and air release properties of industrial gear oils using a spur gear test rig. Flender foam test procedure ISBN members, non-members PTI/13 Available from the Institute of Petroleum, see the British Standards section foreword for ordering information BS ISO 12230:2012 Polybutene-1 (PB-1) pipes. Effect of time and temperature on the expected strength ISBN PRI/88/4 BS ISO :2012 Electronic still-picture imaging. Removable memory. Basic removable-memory model supersedes BS ISO :2007 ISBN members, non-members CPW/42 BS ISO :2012 Electrically propelled road vehicles. Test specification for lithium-ion traction battery packs and systems. High-energy applications ISBN members, non-members PEL/69 BS ISO 12671:2012 Thermal spraying. Thermally sprayed coatings. Symbolic representation on drawings ISBN STI/40 BS ISO 12878:2012 Environmental monitoring of the impacts from marine finfish farms on soft bottom ISBN members, non-members AW/234 BS ISO :2012 Road vehicles. 24 V fully automatic coupling systems (FACS) for heavy commercial vehicle combinations. General requirements and definitions ISBN AUE/13 BS ISO :2012 Road vehicles. Open Test sequence exchange format (OTX). Standard extensions and requirements ISBN members, non-members AUE/16 BS ISO 13444:2012 Technical product documentation (TPD). Dimensioning and indication of knurling ISBN TDW/4 BS ISO :2012 Industrial furnaces and associated processing equipment. Safety. General requirements ISBN members, non-members RHE/13 BS ISO 14291:2012 Vacuum gauges. Definitions and specifications for quadrupole mass spectrometers ISBN MCE/8/-/4 BS ISO 14322:2012 Plastics. Epoxy resins. Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry ISBN PRI/42 BS ISO 14452:2012 Network services billing. Requirements supersedes BS 8463:2005+A1:2008 ISBN SVS/0/3 BS ISO 14486:2012 Laminate floor coverings. Specification ISBN PRI/3/60 BS ISO 15009:2012 Soil quality. Gas chromatographic determination of the content of volatile aromatic hydrocarbons, naphthalene and volatile halogenated hydrocarbons. Purge-andtrap method with thermal desorption supersedes BS ISO 15009:2002 ISBN EH/4 BS ISO :2012 Paints and varnishes. Determination of release rate of biocides from antifouling paints. Determination of tralopyril release rate by quantitation of its degradation product in the extract ISBN STI/10 BS ISO/IEC 15415:2011 Information technology. Automatic identification and data capture techniques. Bar code symbol print quality test specification. Two-dimensional symbols supersedes BS EN ISO 15415:2005 ISBN members, non-members IST/34 18 Prices may be subject to change. Update Standards October 2012

19 BS ISO 15632:2012 Microbeam analysis. Selected instrumental performance parameters for the specification and checking of energy-dispersive X-ray spectrometers for use in electron probe microanalysis supersedes BS ISO 15632:2002 ISBN CII/9 BS ISO :2012 Buildings and constructed assets. Service life planning. Service life prediction procedures supersedes BS ISO :2001 ISBN members, non-members CB/101 BS ISO 16159:2012 Space systems. Launch pad and integration site. Facility, system and equipment failure analysis ISBN ACE/68/-/3 BS ISO 16162:2012 Cold-rolled steel sheet products. Dimensional and shape tolerances supersedes BS ISO 16162:2010 ISBN ISE/109 BS ISO 16163:2012 Continuously hot-dipped coated steel sheet products. Dimensional and shape tolerances supersedes BS ISO 16163:2010 ISBN ISE/109 BS ISO 16592:2012 Microbeam analysis. Electron probe microanalysis. Guidelines for determining the carbon content of steels using a calibration curve method supersedes BS ISO 16592:2006 ISBN CII/9 BS ISO :2012 Mechanical vibration and shock. Characterization of the dynamic mechanical properties of visco-elastic materials. Principles and guidelines ISBN GME/21 BS ISO/IEC 19790:2012 Information technology. Security techniques. Security requirements for cryptographic modules supersedes BS ISO/IEC 19790:2006 ISBN members, non-members IST/33 BS ISO :2012 Cryogenic vessels. Pilot operated pressure-relief devices. Pressure-relief accessories for cryogenic service ISBN PVE/18 BS ISO/IEC 21117:2012 Information technology. Office equipment. Copying machines and multi-function devices. Information to be included in specification sheets and related test methods ISBN members, non-members IST/3 BS ISO :2012 Mechanical vibration. Rotor balancing. Procedures for assessing balance errors supersedes BS :1997 ISBN GME/21 BS ISO :2012 Optics and photonics. Specification of reference dictionary. Classes and properties definitions ISBN members, non-members CPW/172 BS ISO 23788:2012 Metallic materials. Verification of the alignment of fatigue testing machines ISBN members, non-members ISE/101/6 BS ISO/IEC 24735:2012 Information technology. Office equipment. Method for measuring digital copying productivity supersedes BS ISO/IEC 24735:2009 ISBN members, non-members IST/3 BS ISO 26162:2012 Systems to manage terminology, knowledge and content. Design, implementation and maintenance of terminology management systems ISBN members, non-members TS/1 BS ISO :2012 Road vehicles. Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements. General information and use case definition supersedes DD ISO/PAS :2006 ISBN AUE/16 BS ISO :2012 Road vehicles. Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements. Common data dictionary supersedes DD ISO/PAS :2006 ISBN members, non-members AUE/16 BS ISO :2012 Road vehicles. Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements. Common message dictionary supersedes DD ISO/PAS :2006 ISBN members, non-members AUE/16 BS ISO :2012 Road vehicles. Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements. Connection between vehicle and test equipment supersedes DD ISO/PAS :2006 ISBN AUE/16 BS ISO 27588:2012 Rubber, vulcanized or thermoplastic. Determination of dead-load hardness using the very low rubber hardness (VLRH) scale supersedes BS ISO 27588:2008 ISBN PRI/22 BS IEC 61671:2012 IEEE standard for automatic test markup language (ATML) for exchanging automatic test equipment and test information via XML ISBN members, non-members GEL/93 BS IEC 62529:2012 IEEE standard for signal and test definition supersedes BS IEC 62529:2007 ISBN members, non-members GEL/93 Update Standards October 2012 Prices may be subject to change. 19

20 BS Implementations continued... BS IEC 62531:2012 IEEE standard for property specification language (PSL) supersedes BS IEC 62531:2007 ISBN members, non-members GEL/93 PUBLISHED DOCUMENTS PD 476-3:2012 Classification rules for the end-use application of test results arising from BS 476-3, Classification and method of test for external fire exposure of roofs ISBN FSH/22/-/8 PD :2012 Application of fire safety engineering principles to the design of buildings. Property protection, business and mission continuity, and resilience ISBN members, non-members FSH/24 PD CEN/TS :2012 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Unplasticized poly(vinyl chloride) (PVC-U). Guidance for the assessment of conformity supersedes DD ENV :2001 ISBN PRI/88/1 PD CEN/TS :2012 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Acrylonitrile-butadienestyrene (ABS). Guidance for the assessment of conformity supersedes DD ENV :2001 ISBN PRI/88/1 PD CEN/TS :2012 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Styrene-copolymer blends (SAN+PVC). Guidance for the assessment of conformity supersedes DD ENV :2001 ISBN PRI/88/1 PD CEN/TS :2012 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Chlorinated poly(vinyl chloride) (PVC-C). Guidance for assessment of conformity supersedes DD ENV :2001 ISBN PRI/88/1 PD ISO/TS :2012 Industrial trucks. Safety requirements and verification. Regional requirements for countries outside the European Community ISBN MHE/7 PD ISO/TS 13605:2012 Solid mineral fuels. Major and minor elements in hard coal ash and coke ash. Wavelength dispersive X-ray fluorescence spectrometric method ISBN PTI/16 PD CEN/TR :2012 Implementation Guide for functional standards prepared by CEN/TC 234 Gas infrastructure. General supersedes PD CR 13737:2000 ISBN GSE/33 PD ISO/TR 14047:2012 Environmental management. Life cycle assessment. Illustrative examples on how to apply ISO to impact assessment situations supersedes PD ISO/TR 14047:2003 ISBN members, non-members SES/1/5 PD ISO/TR 14049:2012 Environmental management. Life cycle assessment. Illustrative examples on how to apply ISO to goal and scope definition and inventory analysis supersedes PD ISO/TR 14049:2000 ISBN members, non-members SES/1/5 PD ISO/TS 14909:2012 Fibre ropes for offshore stationkeeping. High modulus polyethylene (HMPE) ISBN members, non-members TCI/77 PD ISO/TR 16098:2012 Reclaimed rubbers and reclaimed crumb rubbers. Evaluation of dispersion in rubber mixes ISBN PRI/50 PD CEN ISO/TS 16179:2012 Footwear. Critical substances potentially present in footwear and footwear components. Determination of organotin compounds in footwear materials ISBN TCI/69 PD CEN ISO/TS 16186:2012 Footwear. Critical substances potentially present in footwear and footwear components. Test method to quantitatively determine dimethyl fumarate (DMFU) in footwear materials ISBN TCI/69 PD CEN/TS 16384:2012 Synthetic sport systems. Leaching test ISBN PRI/57 PD ISO/IEC TS :2012 Conformity assessment. Requirements for bodies providing audit and certification of management systems. Competence requirements for auditing and certification of environmental management systems ISBN CAS/1 PD ISO/IEC TR 20004:2012 Information technology. Security techniques. Refining software vulnerability analysis under ISO/IEC and ISO/IEC ISBN IST/33 PD ISO/TS :2012 Photography and graphic technology. Extended colour encodings for digital image storage, manipulation and interchange. Reference input medium metric RGB colour image encoding (RIMM RGB) supersedes DD ISO/TS :2006 ISBN CPW/42 20 Prices may be subject to change. Update Standards October 2012

21 PD ISO/TS 22113:2012 Milk and milk products. Determination of the titratable acidity of milk fat ISBN AW/5 PD ISO/IEC TR 29186:2012 Information technology. Office equipment. Test method of colour gamut mapping algorithm for office colour softcopy and hardcopy ISBN IST/3 PD IEC/TS 62768:2012 Preparation and processing of source definitions for data element types. Guidelines for product committees ISBN GEL/3 PD IEC/TS 62771:2012 Information model covering the contents of IEC and IEC , IEC 61175, IEC and IEC ISBN GEL/3 PUBLICLY AVAILABLE SPECIFICATIONS Publicly Available Specifications (formerly Product Assessment Specifications) are issued to provide an interim document where there is a market need but where a full British or European Standard has yet to be published. PAS 24:2012 Enhanced security performance requirements for doorsets and windows in the UK. External doorsets and windows intended to offer a level of security suitable for dwellings and other buildings exposed to comparable risk supersedes BS 7950:1997 and PAS 24:2007+A2:2011 ISBN members, non-members B/538 PAS 820:2012 Laboratory-identifiable forensic codes. Classification of performance when exposed to artificial weathering ISBN members, non-members SPECIALIST BOOKS FROM BSI BIP 0131:2012 TickITplus Base Process Library Version Word Edition on CD ISBN members, non-members BIP 2143:2012 Business continuity exercises and tests. Delivering successful exercise programmes with ISO supersedes BIP 2143:2008 ISBN members, non-members BIP 2151:2012 Auditing business continuity management plans. Assess and improve your performance against ISO supersedes BIP 2151:2008 ISBN members, non-members CORRIGENDA TO BRITISH STANDARDS Most amendments are not issued separately. Those that make significant changes to a standard are incorporated into the standard which is reissued (see Updated British Standards ). British Standards which have been corrected via corrigenda are available on request, free of charge to past purchasers of the standard. All amendments and corrigenda to date of despatch are included within any main publication when ordered for the first time. The following corrigenda to British Standards were made available last month. BS :2011 LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables of rated voltage 0.6/1 kv. XLPE insulated combined neutral and earth copper wire concentric cables with copper or aluminium conductors CORRIGENDUM 1 GEL/20/16 BS :2011 LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables of rated voltage 0.6/1 kv. XLPE insulated combined neutral and earth copper wire concentric cables with copper or aluminium conductors, having low emission of smoke and corrosive gases when affected by fire CORRIGENDUM 1 GEL/20/16 BS :2011 LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables of rated voltage 0.6/1 kv. XLPE insulated split concentric cables with copper or aluminium conductors CORRIGENDUM 1 GEL/20/16 BS :2011 LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables of rated voltage 0.6/1 kv. XLPE insulated split concentric cables with copper or aluminium conductors, having low emission of smoke and corrosive gases when affected by fire CORRIGENDUM 1 GEL/20/16 BS :2011 LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables of rated voltage 0.6/1 kv. XLPE insulated, copper wire waveform concentric cables with solid aluminium conductors CORRIGENDUM 1 GEL/20/16 BS :2011 LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables of rated voltage 0.6/1 kv. XLPE insulated, copper wire waveform or helical concentric cables with solid aluminium conductors, having low emission of smoke and corrosive gases when affected by fire CORRIGENDUM 1 GEL/20/16 BS :2011 LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables with extruded insulation of rated voltages of 11 kv to 33 kv. Single-core 11 kv to 33 kv cables CORRIGENDUM 1 GEL/20/16 BS :2011 LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables with extruded insulation for rated voltages of 11 kv and 33 kv. Single-core 33 kv lead sheathed cables CORRIGENDUM 1 GEL/20/16 BS :2011 LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables with extruded insulation for rated voltages of 11 kv to 33 kv. Three-core 11 kv cables CORRIGENDUM 1 GEL/20/16 Update Standards October 2012 Prices may be subject to change. 21

22 Corrigenda to British Standards continued... BS :2011 LV and MV polymeric insulated cables for use by distribution and generation utilities. Polymeric insulated aerial bundled conductors (ABC) of rated voltage 0.6/1 kv for overhead distribution CORRIGENDUM 1 GEL/20/16 BS 8567:2012 Specification for outdoor electricity meter cupboards CORRIGENDUM 1 PEL/13 BS EN :2010 Water slides. Safety requirements and test methods CORRIGENDUM 1 SW/136 BS EN ISO :2012 Implants for surgery. Metallic materials. Unalloyed titanium CORRIGENDUM 1 CH/150/1 BS EN :2009 Unfired pressure vessels. General CORRIGENDUM 3 PVE/1 BS EN :2009+A2:2012 Unfired pressure vessels. Materials CORRIGENDUM 3 PVE/1 BS EN :2009+A1:2012 Unfired pressure vessels. Design CORRIGENDUM 3 PVE/1 BS EN :2009+A1:2011 Unfired pressure vessels. Fabrication CORRIGENDUM 3 PVE/1 BS EN :2009 Unfired pressure vessels. Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron CORRIGENDUM 3 PVE/1 BS EN :2009 Unfired pressure vessels. Additional requirements for pressure vessels of aluminium and aluminium alloys CORRIGENDUM 3 PVE/1 BS EN ISO :2009 Petroleum and natural gas industries. Specific requirements for offshore structures. Marine operations CORRIGENDUM 1 B/525/12 BS EN :2012 Explosive atmospheres. Equipment protection by intrinsic safety i CORRIGENDUM 1 EXL/31 BS EN :2012 Low-voltage switchgear and controlgear. Contactors and motor-starters. AC semiconductor motor controllers and starters CORRIGENDUM 1 PEL/17/2 BS ISO/IEC :1999 Information technology. Security techniques. Entity authentication. Mechanisms using a cryptographic check function CORRIGENDUM 2 IST/33 BS ISO/IEC 21117:2012 Information technology. Office equipment. Copying machines and multi-function devices. Information to be included in specification sheets and related test methods CORRIGENDUM 1 IST/3 BS 2A 260-2A 265:2010 Specification for pan and 100º countersunk slotted head screws with ISO metric screw threads CORRIGENDUM 1 ACE/12 UPDATED BRITISH STANDARDS The following standards have been amended and the amendments have been incorporated into an updated standard. NOTE: Updated British Standards must be reordered as the amendments are not available separately. BS EN ISO 9856:2003+A1:2012 Conveyor belts. Determination of elastic and permanent elongation and calculation of elastic modulus AMENDMENT 1 PRI/67 BS EN :2003+A2:2012 Low-voltage switchgear and controlgear. Control units for built-in thermal protection (PTC) for rotating electrical machines AMENDMENT members, non-members PEL/17/2 BS ISO :2006+A1:2012 Water quality. Vocabulary. Part 2 AMENDMENT members, non-members EH/3 BS ISO 15154:2003+A1:2012 Tobacco. Determination of the content of reducing carbohydrates. Continuous-flow analysis method AMENDMENT 1 AW/40 BS ISO 15517:2003+A1:2012 Tobacco. Determination of nitrate content. Continuous-flow analysis method AMENDMENT 1 AW/40 BS ISO/IEC :2009+A1:2012 Information technology. Personal identification. Access control, authentification and integrity validation AMENDMENT members, non-members IST/17 PD ISO/TS 21033:2011+A1:2012 Animal and vegetable fats and oils. Determination of trace elements by inductively coupled plasma optical emission spectroscopy (ICP-OES) AMENDMENT 1 AW/307 BS ISO/IEC 26300:2006+A1:2012 Information technology. Open Document Format for Office Applications (OpenDocument) v1 0 AMENDMENT members, non-members IST/41 BS SP 33-39:1951+A4:2012 Specifications for Turnbarrels, tension rods and swaged cable-end connections for aircraft AMENDMENT 4 ACE/12 BS SP 49 and BS SP 50:1953+A1:2012 Specifications for Ball ends for swaging on cable. For aircraft (Suitable for 5 cwt. cable) AMENDMENT 1 ACE/12 BS SP 59 and SP 60:1955+A1:2012 Specifications for Spring catches for aeronautical purposes AMENDMENT 1 ACE/12 22 Prices may be subject to change. Update Standards October 2012

23 BS SP 66 and 67:1955+A2:2012 Specifications for Cable thimbles for aircraft AMENDMENT 2 ACE/12 BS SP :1957+A2:2012 High tensile steel fork joints (Unified threads). For aircraft AMENDMENT 2 ACE/12 SPECIAL ANNOUNCEMENTS Comments can be sent by or by post to named contacts at: BSI Group 389 Chiswick High Road London W4 4AL Tel: Recruitment for ten CEN Consultants in the fields of: Construction Products (1) Regulation 305/2011/EU Machinery Safety (3) and Noise (2) Directive 2006/42/EC Medical Devices (2) Directives 90/385/EEC, 93/42/EEC, 98/79/EEC Pyrotechnics (1) Directive 2007/23/EC Packaging and packaging Waste (1) Directive 94/62/EC In anticipation of a contract between CEN and EC/EFTA for consultant services, the CEN- CENELEC Management Centre is launching a call for candidates in the above fields, to advise CEN technical bodies on the coherence of the European Standards developed with the relevant EC Directives/Regulations. The successful candidates should be able to take up their post on 1 January 2013, the actual number of working days to be contracted will be confirmed during the selection process. The initial contract will be for one year with a possibility of subsequent renewal. Further information regarding responsibilities of CEN-CENELEC consultants, candidates should refer to CEN/CENELEC Guide 15 Tasks and responsibilities of the New Approach consultants freely available at: ftp://ftp.cen.eu/boss/reference_documents/gui des/cen_clc/cen_clc_15.pdf Applications in electronic file format including CV and supporting letter (both in English) should be submitted by 15 October, 2012 to: consultants@cencenelec.eu Contact: Ian Greensmith ian.greensmith@bsigroup.com BRITISH STANDARDS PROPOSED FOR CONFIRMATION It is BSI policy for every standard to be reviewed by the technical committee responsible not more than five years after publication, to establish whether it is still current and, if it is not, to identify and set in hand appropriate action. Circumstances may lead to an earlier review. Confirmation indicates the continuing currency of a standard. A note of any objections to the proposals below should be sent to Debbie Stead, Head of Committee Service Centre and International Secretariat, BSI Group, 389 Chiswick High Road, London W4 4AL or via to BSUKoperations.review@bsigroup.com by 30 November, BS :1990 Methods for test for soils for civil engineering purposes. In-situ tests B/526/3 BRITISH STANDARDS REVIEWED AND CONFIRMED It is BSI policy for every standard to be reviewed by the technical committee responsible not more than five years after publication, to establish whether it is still current and, if it is not, to identify and set in hand appropriate action. Confirmation indicates the continuing currency of a standard. Where any standard in this list has been amended since publication, confirmation includes all amendments published to date. Reference to a particular amendment indicates that it is published concurrently with the confirmation. BS 84:2007 Parallel screw threads of Whitworth form. Requirements FME/9 BS 341-3:2002 Transportable gas container valves. Valve outlet connections PVE/3/1 BS 417-2:1987 Specification for galvanized low carbon steel cisterns, cistern lids, tanks and cylinders. Metric units B/504 BS 419:1966 Specification for varnished fabrics and tapes for electrical purposes GEL/15/7 BS 426:1969 Specification for fixed centres for use on machine tools and in other applications BS 470:1984 Specification for inspection, access and entry openings for pressure vessels PVE/1 BS 476-4:1970 Fire tests on building materials and structures. Non-combustibility test for materials FSH/21 BS :1982 Fire tests on building materials and structures. Method for assessing the heat emission from building materials FSH/21 BS :1991 Fire tests on building materials and structures. Method of test for ignitability of products by direct flame impingement FSH/21 BS :1989 Fire tests on building materials and structures. Guide to full scale fire tests within buildings FSH/21 BS 499-2C:1999 Welding terms and symbols. European arc welding symbols in chart form WEE/1 BS 546:1950 Specification. Two-pole and earthing-pin plugs, socket-outlets and socket-outlet adaptors PEL/23 BS 546:Supplement No. 1:1960 Specification for plugs made of resilient material PEL/23 BS 593:1989 Specification for laboratory thermometers BS 615:1953 Specification for Kohlrausch flasks BS 633:1970 Specification for cotton selvedge tapes and webbing for electrical purposes GEL/15/7 BS 658:1989 Specification for apparatus for the determination of distillation range (including flasks and receivers) Update Standards October 2012 Prices may be subject to change. 23

24 British Standards Reviewed and Confirmed continued... BS 675:1953 Specification for sugar flasks BS 676:1982 Specification for flasks with graduated necks (phenols type) BS 692:1990 Specification for meteorological thermometers BS 701:1953 Specification for brewers mash flask BS 718:1991 Specification for density hydrometers BS 733-2:1987 Pyknometers. Methods for calibration and use of pyknometers BS 753:1987 Schedule for density-composition tables for aqueous solutions of sulphuric acid BS 756:1952 Specification for Dean and Stark apparatus BS 791:1990 Specification for solid-stem calorimeter thermometers BS 855:1990 Specification for welded steel boilers for central heating and indirect hot water supply (rated output 44 kw to 3 MW) RHE/10 BS 919-1:2007 Screw gauge limits and tolerances. Specification for gauges for screw threads of unified form FME/9 BS 919-2:2007 Screw gauge limits and tolerances. Specification for gauges for screw threads of Whitworth and B.A. forms FME/9 BS 919-3:2007 Screw gauge limits and tolerances. Specification for gauges for screw threads of ISO metric form FME/9 BS 919-4:2007 Screw gauge limits and tolerances. Limits of size for gauges for screw threads of unified form diameters 1/4 in and larger FME/9 BS 939:2007 Engineers squares (including cylindrical and block squares). Specification BS 975:1987 Schedule for density-composition tables for aqueous solutions of nitric acid BS 976:1987 Schedule for density-composition tables for aqueous solutions of hydrochloric acid BS :1977 Methods for analysis and testing of coal and coke. Arsenic in coal and coke PTI/15 BS :1990 Methods for analysis and testing of coal and coke. Caking and swelling properties of coal. Determination of swelling properties using a dilatometer PTI/15 BS :1992 Methods for analysis and testing of coal and coke. Tests special to coke. Determination of Micum and Irsid indices PTI/15 BS :1992 Methods for analysis and testing of coal and coke. Tests special to coke. Determination of critical air blast value PTI/15 BS :1985 Code for temperature measurement. Expansion thermometers. Guide to selection and use of liquid-in-glass thermometers BS :1989 Code for temperature measurement. Expansion thermometers. Guide to selection and use of dial-type expansion thermometers GEL/65/2 BS :1989 Temperature measurement. Guide to selection and use of industrial resistance thermometers GEL/65/2 BS :1992 Temperature measurement. Guide to the selection and use of thermocouples GEL/65/2 BS :1989 Temperature measurement. Guide to selection and use of radiation pyrometers GEL/65/2 BS :1988 Temperature measurement. Guide to selection and use of temperature/time indicators GEL/65/2 BS 1089:1973 Specification for workhead spindle noses for grinding machines: cylindrical external, internal and universal types BS 1153:1992 Recommendations for processing and storage of silver-gelatine-type microfilm IDT/1/1 BS 1306:1975 Specification for copper and copper alloy pressure piping systems PVE/10 BS 1365:1990 Specification for short-range short-stem thermometers BS 1428-B2:1960 Microchemical analysis. Apparatus for the determination of elements by other than combustion methods. Specification for ammonia distillation apparatus (Markham) BS 1428-D5:1955 Microchemical apparatus. Volumetric analysis. Specification for syringe pattern micro-pipette BS :1984 Copper indirect cylinders for domestic purposes. Specification for single feed indirect cylinders B/504 BS :2007 Unified screw threads. Screw threads with diameters 1 4 in and larger. Requirements FME/9 BS :2007 Unified screw threads. Screw threads with diameters below 1 4 in. Requirements FME/9 BS 1622:1989 Specification for spreaders for winter maintenance B/513 BS 1655:1950 Specification for flanged automatic control valves for the process control industry (face-toface dimensions) GEL/65/2 BS :1991 Machine tapers. Specification for gauges 24 Prices may be subject to change. Update Standards October 2012

25 BS 1676:1970 Specification for heaters for tar and bitumen (mobile and transportable) B/513 BS 1694:1990 Specification for hospital ward cots for children CH/101 BS 1707:1989 Specification for hot binder distributors for road surface dressing B/513 BS :1986 Fences. Specification for cleft chestnut pale fences B/201 BS :1960 Methods for the analysis of copper alloys. Method for the determination of tin in copper alloys (nickel coil reduction method) NFE/34 BS :1960 Methods for the analysis of copper alloys. Method for the determination of silicon in copper alloys (photometric method) NFE/34 BS :1960 Methods for the analysis of copper alloys. Method for the determination of phosphorus in copper alloys (photometric method) NFE/34 BS :1963 Methods for the analysis of copper alloys. Method for the determination of zinc in copper alloys NFE/34 BS 1748:Parts 1-5:1961 Methods for the analysis of copper alloys. Methods for the determination of copper, lead, iron, aluminium and nickel in copper alloys NFE/34 BS 1748:Parts 11 and 12:1964 Methods for the analysis of copper alloys. Methods for the determination of copper and lead in leaded bronze alloys NFE/34 BS :1990 Hospital bedside lockers. Specification for general purpose bedside lockers for patients CH/101 BS :1976 Specification for hospital bedside lockers. General purpose lockers of wooden construction with facilities for hanging day clothes CH/101 BS 1794:1952 Specification for chart ranges for temperature recording instruments GEL/65/2 BS 1868:1975+A1:1990 Specification for steel check valves (flanged and butt-welding ends) for the petroleum petrochemical and allied industries PSE/18/2 BS 1895:1973 Specification for metal-framed wheeled screens for use in hospitals CH/101 BS 1900:1976 Specification for secondary reference thermometers BS :1989 Testing the strength of yarns and threads from packages. Methods for determination of knot strength and loop strength TCI/24 BS 1935:1972 Specification for spindle noses and adjustable adaptors for multi-spindle heads BS :1952 Undercuts and runouts for screw threads. Inch screw threads FME/9 BS :1991 Undercuts and runouts for screw threads. Specification for ISO metric screw threads FME/9 BS 1945:1971 Specification for fireguards for heating appliances (gas, electric and oil-burning) CW/1/5 BS 1968:1953 Specification for floats for ballvalves (copper) B/504 BS 1979:1985 Specification for hospital ward bedsteads for psychiatric hospitals CH/101 BS :1987 Chucks for machine tools and portable power tools. Specification for dimensions of collet pads for base jaws of power operated workholding chucks BS :1987 Chucks for machine tools and portable power tools. Specification of criteria to be stated affecting performance of power operated workholding chucks at speed BS :1989 Chucks for machine tools and portable power tools. Code of practice for the safe operation of workholding chucks used on lathes BS 2043:1968 Method for the determination of wool fibre fineness by the use of a projection microscope TCI/24 BS 2069:1954 Specification for gas sampling tubes BS 2071:1989 Specification for Soxhlet extractors BS 2096:1954 Method of testing oil-fired rotary dryers for use in asphalt and coated macadam plant B/513 BS 2099:1989 Specification for castors for hospital equipment CH/101 BS 2456:1990 Specification for floats (plastics) for float operated valves for cold water services B/504/-/8 BS 2485:1987 Specification for tee slots, tee bolts, tee nuts and tenons BS 2718:1979 Specification for gas cylinder trolleys CH/101 BS 2765:1969 Specification for dimensions of temperature detecting elements and corresponding pockets GEL/65/2 BS :1988 Examination and general treatment couches. Specification for fixed height couches CH/101 BS :1991 Examination and general treatment couches. Specification for variable height couches CH/101 BS 2842:1992 Specification for whirling hygrometer BS 2879:1980 Specification for draining taps (screw-down pattern) B/504 BS 2881:1989 Specification for cupboards for the storage of medicines in health care premises CH/101 Update Standards October 2012 Prices may be subject to change. 25

26 British Standards Reviewed and Confirmed continued... BS 2889:1967 Method for the determination of trash content of cotton and for trash and lint content of waste intended for spinning, by the Shirley analyser TCI/24 BS 2891:1992 Specification for operating table mattresses and mattress sections CH/101 BS 2893:1989 Specification for chemical preparations for portable and transportable chemical closets (excluding those for use in aircrafts) CH/216 BS 3127:1979 Specification for ferrous and non-ferrous Bourdon tubing GEL/65/2 BS :1972 Specification for cold emulsion spraying machines for roads. Metric units B/513 BS :1987 Methods for determination of cotton fibre properties by the airflow method. Determination of micronaire value by the single compression airflow method TCI/24 BS 3183:1968 Method for the determination of wool fibre diameter by the airflow method TCI/24 BS 3198:1981 Specification for copper hot water storage combination units for domestic purposes B/504 BS 3248:1986 Specification for sparkguards for use with solid fuel appliances CW/1/5 BS 3251:1976 Specification. Indicator plates for fire hydrants and emergency water supplies FSH/17 BS 3314:1982 Specification for protective aprons for wet work PH/3 BS 3321:1986 Method for measurement of the equivalent pore size of fabrics (bubble pressure test) TCI/24 BS 3356:1990 Method for determination of bending length and flexural rigidity of fabrics TCI/24 BS 3407:1982 Guide for assessing coke screening plant PTI/15 BS 3423:1986 Recommendations for design of glass vacuum vessels (including desiccators) for laboratory use BS 3449:1990 Method for resistance of fabrics to water absorption (Static immersion test) TCI/24 BS 3475:1976 Specification for bowl stands for use in hospitals CH/101 BS 3551:1962 Specification for alloy steel shackles MHE/1 BS 3567:1985 Code of practice for preparation of flowsheets for the design of coal preparation plant PTI/15 BS 3572:1986 Specification for access fittings for chimneys and other high structures in concrete or brick work B/514/39 BS 3619:1976 Specification. Mobile infusion stands CH/101 BS 3622:1975 Specification for general purpose stools and anaesthetists chairs for hospital use CH/101 BS :1971 Symbols for machine tools. General symbols BS :1973 Specification for symbols for machine tools. Additional general symbols BS :2007 ISO metric screw threads. Specification for selected limits of size FME/9 BS 3678:1986 Specification for access hooks for chimneys and other high structures in steel B/514/39 BS :1990 General tests for machine tools. Method of testing performance of machines operating under loaded conditions in respect of thermal distortion BS 3882:2007 Specification for topsoil and requirements for use AW/20 BS :1974 Modular units for machine tools. Specification for basic units BS :2007 Nursery stock. Specification for forest trees, poplars and willows AW/1 BS 3996:1978 Specification for colour coding for one-mark and graduated pipettes (including requirements for the service performance of the colour coding enamels) BS :1967 Methods of measuring the performance of household electrical appliances. Electric clothes drying cabinets and racks CPL/59/1 BS 4029:1978 Method of test for the determination of tensile elastic recovery of single fibres and filaments (constant-rate-of-extension machines) TCI/24 BS 4044:1989 Methods for determination of fibre length by comb sorter diagram TCI/24 BS 4046:1991 Specification for compressed straw building slabs B/541 BS 4068:1977 Specification for hospital trolleys for instruments, dressings and for anaesthetists use including angular trolleys CH/101 BS 4074:2000 Specification for steel trench struts B/514/21 BS :1996 Specification for domestic front entrance gates. Specification for metal gates B/201 BS 4145:1967 Specification for glass mica boards for electrical purposes GEL/15/11 BS 4151:1967 Method of evaluating pneumatic valve positioners with input signal of 3 to 15 lbf/in (gauge) GEL/65/2 26 Prices may be subject to change. Update Standards October 2012

27 BS :1967 Machine tool components. Locknuts ( C type, socket set screw locking) BS :1967 Machine tool components. Collars BS :1973 Machine tool components. Wide range collets BS :1976 Specification. Machine tool components. Levelling screws, nuts and seating plates BS :1977 Machine tool components. Trapezoidal threads for lead and feed screw assemblies BS :1983 Machine tool components. Recommendations for accuracy grades of gears BS :1985 Machine tool components. Specification for dimensions of counterbored holes BS :1987 Machine tool components. Method for determination of the pilot diameter of 60º centre holes BS 4250:1997 Specification for commercial butane and commercial propane PTI/15 BS 4262:1984 Method of specifying the technical quality of coke for use in blast furnaces PTI/15 BS :1996 Anaesthetic and analgesic machines. Specification for intermittent (demand) flow analgesic machines for use with 50/50% (V/V) nitrous oxide and oxygen CH/121/1 BS 4320:1968 Specification for metal washers for general engineering purposes. Metric series FME/9 BS 4322:1968 Recommendations for buffering on hospital vehicles such as trolleys CH/101 BS 4429:1987 Specification for rigging screws and turnbuckles for general engineering, lifting purposes and pipe hanger applications MHE/1 BS :1969 Specification for lathe spindle noses and faceplates. Types A and Camlock BS 4444:1989 Guide to electrical earth monitoring and protective conductor proving PEL/23 BS 4482:2005 Steel wire for the reinforcement of concrete products. Specification ISE/104 BS 4483:2005 Steel fabric for the reinforcement of concrete. Specification ISE/104 BS 4542:1970 Method for determination of loss tangent and permittivity of electrical insulating materials in sheet form (Lynch method) GEL/15/6 BS :1978 Methods of testing cement. General introduction B/516/12 BS :1978 Methods of testing cement. Physical tests. Introduction B/516/12 BS :1978 Methods of testing cement. Standard sand for mortar cubes B/516/12 BS 4554:1970 Method of test for wettability of textile fabrics TCI/24 BS 4573:1970 Specification for 2-pin reversible plugs and shaver socket-outlets PEL/23 BS :1984 Flanges for mounting grinding wheels on grinding machine tools. Specification for dimensions and materials of flanges for grinding wheels of less than 76.2 mm bore BS 4611:1989 Methods of test for polyolefin tape yarns TCI/24 BS :1981 Accuracy of machine tools and methods of test. Specification for lathes, general purpose type BS :1988 Accuracy of machine tools and methods of test. Specification for copying lathes and copying attachments BS :1971 Specification for the accuracy of machine tools and methods of tests. Milling machines knee and column type, horizontal or vertical spindle plain BS :1971 Specification for the accuracy of machine tools and methods of test. Milling machines, bed type, horizontal or vertical spindle BS :1979 Specification for the accuracy of machine tools and methods of tests. Milling machines knee and column type, horizontal spindle, universal BS :1975 Specification for the accuracy of machine tools and methods of test. Drilling machines radial type BS :1974 Accuracy of machine tools and methods of test. Drilling machines, vertical floor mounted column and pillar types BS :1979 Specification for the accuracy of machine tools and methods of test. Dividing heads BS :1976 Accuracy of machine tools and methods of test. Drilling machines, turret and single spindle coordinate types BS :1981 Accuracy of machine tools and methods of test. Specification for broaching machines, horizontal internal type BS :1980 Accuracy of machine tools and methods of test. Gear planing machines BS :1980 Accuracy of machine tools and methods of test. Gear shaping machines Update Standards October 2012 Prices may be subject to change. 27

28 British Standards Reviewed and Confirmed continued... BS :1988 Accuracy of machine tools and methods of test. Specification for numerically controlled turning machines up to and including 1500 mm turning diameter BS :1981 Accuracy of machine tools and methods of test. Specification for automatic lathes, multi-spindle (indexing drum) type BS :1995 Accuracy of machine tools and methods of test. Specification for surface finish of test pieces BS :1977 Intruder alarm systems. Specifications for components. Continuous wiring GW/1 BS :1977 Intruder alarm systems. Specifications for components. Foil on glass GW/1 BS :1977 Intruder alarm systems. Specifications for components. Protective switches GW/1 BS :1978 Intruder alarm systems. Specifications for components. Ultrasonic movement detectors GW/1 BS :1978 Intruder alarm systems. Specifications for components. Acoustic detectors GW/1 BS :1978 Intruder alarm systems. Specifications for components. Volumetric capacitive detectors GW/1 BS :1978 Intruder alarm systems. Specifications for components. Pressure mats GW/1 BS :1978 Intruder alarm systems. Specifications for components. Vibration detectors GW/1 BS :1978 Intruder alarm systems. Specifications for components. Beam interruption detectors GW/1 BS :1978 Intruder alarm systems. Specifications for components. Capacitive proximity detectors GW/1 BS :1986 Intruder alarm systems. Specifications for components. Specification for deliberatelyoperated devices GW/1 BS :1986 Intruder alarm systems. Specifications for components. Specification for PVC insulated cables for interconnecting wiring GW/1 BS :1988 Intruder alarm systems in buildings. Codes of practice. Code of practice for exterior alarm systems GW/1 BS :1988 Intruder alarm systems. Terms and symbols. Recommendations for symbols for diagrams GW/1 BS :1991 Quality vocabulary. Quality concepts and related definitions QS/1 BS :1972 Methods for sampling manufactured domestic solid smokeless fuels in small consignments of mass 50 kg to 5000 kg either in bulk or in bags. Sampling of coke PTI/15 BS :1979 Methods for sampling manufactured domestic solid smokeless fuels in small consignments of mass 50 kg to 5000 kg either in bulk or in bags. Sampling of solid smokeless fuels other than coke PTI/15 BS 4859:1989 Methods for test for fabrics produced from polyolefin tape yarns TCI/24 BS 4882:1990 Specification for bolting for flanges and pressure containing purposes FME/9 BS 4886:1988 Specification for hospital bedsteads CH/101 BS :2004 General requirements for rotating electrical machines. Specification for symbols PEL/2 BS :1987 General requirements for rotating electrical machines. Specification for voltage regulation and parallel operation of a.c. synchronous generators PEL/2 BS :1987 General requirements for rotating electrical machines. Specification for winding terminations PEL/2 BS :1973 Specification for rotating electrical machines of particular types or for particular applications. Small-power electric motors and generators PEL/2 BS :1987 Fire hydrant systems equipment. Specification for landing valves for wet risers FSH/17 BS :1987 Fire hydrant systems equipment. Specification for landing valves for dry risers FSH/17 BS :1975 Fire hydrant systems equipment. Specification for inlet breechings for dry riser inlets FSH/17 BS :1975 Fire hydrant systems equipment. Specification for boxes for landing valves for dry risers FSH/17 BS :1974 Fire hydrant systems equipment. Specification for boxes for foam inlets and dry riser inlets FSH/17 BS :2000 Transportable gas containers. Specification for seamless steel gas containers of water capacity 0.5 L up to 15 L for special portable applications PVE/3/3 BS :2000 Transportable gas containers. Specification for seamless aluminium alloy gas containers of water capacity 0.5 L up to 15 L and up to 300 bar charged pressure at 15ºC for special portable application PVE/3/3 BS 5058:1973 Method for the assessment of drape of fabrics TCI/24 BS 5066:1974 Method of test for the resistance of fabrics to an artificial shower TCI/24 BS 5074:1974 Specification for short and long solid-stem thermometers for precision use BS 5116:1974 Method of test for determination of breaking tenacity of flat bundles of cotton fibres TCI/24 28 Prices may be subject to change. Update Standards October 2012

29 BS 5158:1989 Specification for cast iron plug valves PSE/18/3 BS :1988 Methods of test for rubber and plastics hoses and hose assemblies. Hydraulic pressure tests. Determination of volumetric expansion of fueldispensing pump hoses PRI/66 BS 5244:1986 Recommendations for application, storage and life expiry of hydraulic rubber hoses and hose assemblies PRI/66 BS :1984 Pressure vessel details (dimensions). Specification for davits for branch covers of steel vessels PVE/1 BS :1992 Code of practice for fire extinguishing installations and equipment on premises. Halon systems. Specification for halon 1301 total flooding systems FSH/18 BS :1984 Code of practice for fire extinguishing installations and equipment on premises. Halon systems. Halon 1211 total flooding systems FSH/18 BS 5326:1976 Specification. Internal broaching tools and pull chuck locations BS 5350-C6:1990 Methods of test for adhesives. Adhesively bonded joints: mechanical tests. Determination of bond strength in direct tension in sandwich panels PRI/52 BS 5353:1989 Specification for steel plug valves PSE/18/3 BS 5388:1976 Specification for spray taps B/504 BS :1976 Specification for nylon tubing. Fully plasticized nylon tubing types 11 and 12 for use primarily in pneumatic installations PRI/66 BS :1985 Safety of electrical motor-operated industrial and commercial cleaning appliances. Specification for general requirements CPL/61/10 BS :1978 Methods of test for elastomeric threads. Polyurethane thread (elastane yarn) TCI/24 BS 5433:1976 Specification for underground stopvalves for water services B/504 BS 5470:1977 Specification for glass alcohol hydrometers not incorporating a thermometer BS 5471:1977 Specification for thermometer for use with alcohol hydrometers BS 5607:1998 Code of practice for the safe use of explosives in the construction industry B/513 BS 5739:1979 Method of presentation of lubrication instructions for machine tools BS 5779:1979 Specification for spray mixing taps B/504 BS 5842:1980 Specification for thermoplastic hose assemblies for dock, road and tanker use PRI/66 BS 5853:1980 Specification for medicine trolleys CH/101 BS :1987+A2:2008 Railway rolling stock material (metric). Specification for steel bars for retaining rings for tyred wheels RAE/3/-/1 BS 5904:1980 Specification for computer programming language RTL/2 IST/5 BS 5905:1980 Specification for computer programming language CORAL 66 IST/5 BS 5993:1994 Specification for cricket balls SW/136 BS :2007 Building and civil engineering. Vocabulary. Spaces, building types, environment and physical planning B/500/-/1 BS :2007 Building and civil engineering. Vocabulary. Civil engineering. General B/500/-/1 BS :2007 Building and civil engineering. Vocabulary. Work with timber and wood-based panels B/500/-/1 BS :2007 Building and civil engineering. Vocabulary. Work with concrete and plaster B/500/-/1 BS :2007 Building and civil engineering. Vocabulary. Performance characteristics, measurement and joints B/500/-/1 BS :1991 Machine tool ball screws. Specification for accuracy, including geometrical tests BS 6134:1991 Specification for pressure and vacuum switches GEL/65/2 BS :1992 Guide to the economics of quality. Process cost model QS/1 BS :1990 Guide to the economics of quality. Prevention, appraisal and failure model QS/1 BS 6155:1990 Specification for tracheal tubes for large animals in veterinary anaesthesia CH/121/5 BS 6174:1982 Specification for differential pressure transmitters with electrical outputs GEL/65/2 BS :2000 Protective equipment for cricketers. General requirements PH/3/9 BS :2000 Protective equipment for cricketers. Genital protectors PH/3/9 BS :2000 Protective equipment for cricketers. Leg protectors for batsmen, wicket-keepers and fielders, and thigh, arm and chest protectors for batsmen PH/3/9 Update Standards October 2012 Prices may be subject to change. 29

30 British Standards Reviewed and Confirmed continued... BS :2001 Protective equipment for cricketers. Gloves for batsmen PH/3/9 BS 6280:1982 Method of vacuum (backsiphonage) test for water-using appliances B/504 BS :1991 Safety and control devices for use in hot water systems. Specifications for temperature relief valves for pressures from 1 bar to 10 bar B/504 BS :1983 Testing of resin and polymer/cement compositions for use in construction. Method for preparation of test specimens B/517/8 BS :1984 Testing of resin and polymer/cement compositions for use in construction. Methods for determination of density of hardened resin compositions B/517/8 BS :1985 Testing of resin and polymer/cement compositions for use in construction. Method for measurement of tensile strength B/517/8 BS :1984 Testing of resin and polymer/cement compositions for use in construction. Method for the assessment of resistance to liquids B/517/8 BS :1987 Testing of resin and polymer/cement compositions for use in construction. Method for measurement and classification of peak exotherm temperature B/517/8 Help Us to Help You! Always quote your Customer Number Don t know your number? Contact Customer Services who will be happy to check it for you BS :1987 Testing of resin and polymer/cement compositions for use in construction. Method for measurement of temperature of deflection under a bending stress B/517/8 BS :1993 Testing of resin and polymer/cement compositions for use in construction. Methods for determination of creep in compression and in tension B/517/8 BS :1992 Testing of resin and polymer/cement compositions for use in construction. Methods for measurement of unrestrained linear shrinkage and coefficient of thermal expansion B/517/8 BS 6336:1998 Guide to the development of fire tests, the presentation of test data and the role of tests in hazard assessment FSH/22 BS :2007 Maritime structures. Code of practice for the design of Ro-Ro ramps, linkspans and walkways CB/502 BS :1985 Lining of equipment with polymeric materials for the process industries. Specification for lining with sheet thermoplastics PVE/1 BS :1984 Lining of equipment with polymeric materials for the process industries. Specification for lining with non-sheet applied thermoplastics PVE/1 BS :1984 Lining of equipment with polymeric materials for the process industries. Specification for lining with stoved thermosetting resins PVE/1 BS :1984 Lining of equipment with polymeric materials for the process industries. Specification for lining with cold curing thermosetting resins PVE/1 BS :1985 Lining of equipment with polymeric materials for the process industries. Specification for lining with rubbers PVE/1 BS :2007 Specification for installation, exchange, relocation and removal of gas meters with a maximum capacity not exceeding 6 m 3 /h. Low and medium pressure (3rd family gases) GSE/30 BS 6401:1983 Method for measurement, in the laboratory, of the specific optical density of smoke generated by materials FSH/21 BS 6405:1984 Specification for non-calibrated short link steel chain (grade 30) for general engineering purposes: class 1 and 2 MHE/1 BS 6447:1984 Specification for absolute and gauge pressure transmitters with electrical outputs GEL/65/2 BS 6462:1985 Specification for mechanical performance of peg-type casement stays and face-fixed wedgeaction fasteners B/538/4 BS :1999 Quicklime, hydrated lime and natural calcium carbonate. Methods for physical testing B/516/11 BS 6523:1984 Specification for glass beakers for laboratory use BS 6526:1998 Domestic oven gloves. Requirements and test methods PH/3/8 BS 6622:2007 Electric cables. Armoured cables with thermosetting insulation for rated voltages from 3.8/6.6 kv to 19/33 kv. Requirements and test methods GEL/20/16 BS 6675:1986 Specification for servicing valves (copper alloy) for water services B/504 BS 6683:1985 Guide to installation and use of valves PSE/18/1 BS 6751:1986 Guide for protection of machine tools intended for use in extreme environmental conditions BS 6809:1987 Method for calibration of radiometers for use in fire testing FSH/22 BS :1987 Operating tables. Specification for mobile general operating tables CH/ Prices may be subject to change. Update Standards October 2012

31 BS :1987 Operating tables. Specification for fixedpedestal general operating tables CH/101 BS :1989 Analysis of aluminium ores. Method for multielement analysis by wavelength dispersive X-ray fluorescence NFE/35 BS 6898:1987 Specification for glass centrifuge tubes for general laboratory use BS 6905:1987 Method for estimation of concentration of disinfectants used in dirty conditions in hospitals by the modified Kelsey-Sykes test CH/216 BS :1990 Operation and maintenance of earth-moving machinery. Specification for diagnostic ports B/513/1 BS :1989 Design and construction of small kits for oxyfuel gas welding and allied processes. Specification for kits using refillable gas containers for oxygen and fuel gas WEE/18 BS 6972:1988 Specification for general requirements for luminaire supporting couplers for domestic, light industrial and commercial use PEL/23 BS 6979:1989 Method for measurement of static deflection of power presses BS 6991:1990 Specification for 6/10 A, two-pole weatherresistant couplers for household, commercial and light industrial equipment PEL/23 BS :2005 (large print version) Design management systems. Managing inclusive design. Guide MS/4/-/10 BS 7001:1988 Specification for interchangeability and safety of a standardized luminaire supporting coupler PEL/23 BS 7067:1990 Guide to determination and presentation of float and sink characteristics of raw coal and of products from coal preparation plants PTI/15 BS 7068:1989 Specification for alternating pressure air mattresses CH/101 BS 7071:1992 Specification for portable residual current devices PEL/23 BS 7143:1989 Specification for catheter mounts (flexible adaptors) for use with medical breathing systems CH/121/5 BS 7167:1990 Specification for Bordeaux connections MHE/1 BS 7181:1989 Specification for storage cisterns up to 500 L actual capacity for water supply for domestic purposes B/504 BS 7323:1990 Specification for sit harnesses for rock climbing SW/136 BS :1990 Small fixed fire extinguishers. Specification for small fixed halon fire extinguishers FSH/18 BS 7339:1990 Code of practice for supplementary checking of metallic materials of construction in pressurized systems PVE/1 BS :2005 Components for smoke and heat control systems. Functional recommendations and calculation methods for smoke and heat exhaust ventilation systems, employing timedependent design fires. Code of practice FSH/25 BS :2006 Components for smoke and heat control systems. Code of practice on functional recommendations and calculation methods for smoke and heat control systems for covered car parks FSH/25/4 BS 7350:1990 Specification for double regulating globe valves and flow measurement devices for heating and chilled water systems PSE/18/2 BS 7368:1990 Specification for babies elastomeric feeding bottle teats CW/1/4 BS 7438:1991 Specification for steel and copper alloy wafer check valves, single-disk, spring-loaded type PSE/18/2 BS 7521:1992 Specification for electronic messaging enabling the application of BS ISO/IEC in the United Kingdom IST/6 BS :1995 Methods for froth flotation testing of hard coal. Evaluation of flotation characteristics PTI/15 BS 7558:1992 Specification for gun cabinets GW/2 BS 7715:1994 Specification for prevailing torque type bolts, screws and studs with non-metallic prevailing torque elements incorporated into the thread FME/9 BS 7835:2007 Electric cables. Armoured cables with thermosetting insulation for rated voltages from 3.8/6.6 kv to 19/33 kv having low emission of smoke and corrosive gases when affected by fire. Requirements and test methods GEL/20/16 BS :1992 Total quality management. Guide to management principles QS/1 BS :2007 Strata reinforcement support system components used in coal mines. Specification for rockbolting MRE/1 BS 7904:1998 Guide to smoke measurement units. Their basis and use in smoke opacity test methods FSH/21 BS 7907:2007 Code of practice for the design and manufacture of children s clothing to promote mechanical safety TCI/66 BS 7929:1999 Guide for the verification of a pump casing design procedure MCE/6 BS 7951:2000 Electricity meters. Alternating-current singlephase static watt-hour telemeters of accuracy class 1 or 2 PEL/13 BS 7955:1999 Containment nets and sheets on construction works. Specification for performance and test methods B/514/27 Update Standards October 2012 Prices may be subject to change. 31

32 British Standards Reviewed and Confirmed continued... BS :2007 Materials used for the control of liquid spillages. Colour coding of sorbent materials CII/63 BS :2007 Carbon monoxide in dwellings and the combustion performance of gas-fired appliances. Guide for using electronic portable combustion gas analysers as part of the process of servicing and maintenance of gas-fired appliances GSE/30/-/21 BS :2001 Spacers and chairs for steel reinforcement and their specification. Product performance requirements B/525/2 BS :2001 Spacers and chairs for steel reinforcement and their specification. Fixing and application of spacers and chairs and tying of reinforcement B/525/2 BS 7979:2001 Specification for limestone fines for use with Portland cement B/516/6 BS 7981:2002 Code of practice for the installation, maintenance, thorough examination and safe use of mast climbing work platforms (MCWPs) MHE/12 BS 7989:2001 Specification for recirculatory filtration fume cupboards LBI/18 BS :1989 Workmanship on building sites. Code of practice for excavation and filling B/526 BS :1994 Workmanship on building sites. Code of practice for plasterboard partitions and dry linings B/544 BS :1989 Workmanship on building sites. Code of practice for decorative wallcoverings and painting B/209 BS :1990 Workmanship on building sites. Code of practice for hot and cold water services (domestic scale) B/504 BS :1989 Code of practice for pipelines. Pipelines on land: design, construction and installation. Glass reinforced thermosetting plastics PSE/17/2 BS 8212:1995 Code of practice for dry lining and partitioning using gypsum plasterboard B/544/3 BS :2000 Code of practice for cleaning and surface repair of buildings. Surface repair of natural stones, brick and terracotta B/560 BS 8297:2000 Code of practice for design and installation of non-loadbearing precast concrete cladding B/209 BS 8313:1997 Code of practice for accommodation of building services in ducts B/209 BS 8410:2007 Code of practice for lightweight temporary cladding for weather protection and containment on construction works B/514/27 BS 8411:2007 Code of practice for safety nets on construction sites and other works B/514/27 BS :2002 Fire performance of external cladding systems. Test methods for non-loadbearing external cladding systems applied to the face of a building FSH/21 BS 8430:2005 Terminology work. Fundamentals made simple TS/1 BS 8469:2007 Personal protective equipment for firefighters. Assessment of ergonomic performance and compatibility. Requirements and test methods PH/14 BS 8471:2007 Guide to particle sizing methods LBI/37 BS 8476:2007 Code of practice for the safe use of concrete pumps B/513/-/8 BS 8490:2007 Guide to siphonic roof drainage systems B/505 BS 8494:2007 Electronic portable and transportable apparatus designed to detect and measure carbon dioxide in indoor ambient air. Requirements and test methods EXL/31 BS 8496:2007 Water quality. Enumeration of micro-organisms in water samples. Guidance on the estimation of variation of results with particular reference to the contribution of uncertainty of measurement EH/3/4 BS :2000 Soil analysis. Method for determination of coal tar-derived phenolic compounds EH/4 BS 9210 N007-2:1976 Detail specification for radio frequency connectors (type SMB). Unsealed, soldered, captive contact, 50 ohms, snap-on couplings. Control drawings. Mating face details and gauge information EPL/46 BS 9210 N0009-2:1978 Detail specification for radio frequency connectors (series SMC). Unsealed, soldered, captive contact, 50 ohms, screw coupling. Control drawings. Mating face details and gauge information EPL/46 BS 9220 N001:1971 Detail specification for ordinary rectangular (2:1) rigid waveguide tubing. Standard wall thickness. General application category EPL/46 BS 9220 N002:1971 Detail specification for medium flat rectangular (4:1) rigid waveguide tubing. Standard wall thickness. General application category EPL/46 BS 9220 N003:1971 Detail specification for flat rectangular (8.33:1) rigid waveguide tubing. Standard wall thickness. General application category EPL/46 BS 9220 N004:1971 Detail specification for circular rigid waveguide tubing. Standard wall thickness. General application category EPL/46 BS 9222:2007 Personal financial planning. Guidance on the application of BS ISO and assessment of compliance SVS/6 BS 4500A:1970 ISO limits and fits. Data sheet: selected ISO fits hole basis TDW/4 32 Prices may be subject to change. Update Standards October 2012

33 BS 4500B:1970 ISO limits and fits. Data sheet: selected ISO fits shaft basis TDW/4 PD 0010:1997 The principles of good practice for information management IDT/1 PD 6438:1969 A review of present methods for design of bolted flanges for pressure vessels PVE/1 PD 6494:1980 Mismatch of screw thread systems FME/9 PD 6497:1982 Stresses in horizontal cylindrical pressure vessels supported on twin saddles: a derivation of the basic equations and constants used in G.3.3 of BS 5500:1982 PVE/1 PD 6507:1982 Guidance on metric screw threads and fasteners for use by model engineers FME/9 PD 6508:1985 Detail drawings for the apparatus specified in BS 476:Part 11:1982 FSH/21 PD 6516:1987 Guide to guarding fires and heating appliances CW/1/5 PD 6520:1988 Guide to fire test methods for building materials and elements of construction FSH/21 PD :1989 Explanatory supplement to BS 5500:1988. Specification for unfired fusion welded pressure vessels. Section three. Design. Domed ends (heads) PVE/1 PD :1989 Explanatory supplement to BS 5500:1988. Specification for unfired fusion welded pressure vessels. Section three. Design. Openings and branch connections PVE/1 PD :1989 Explanatory supplement to BS 5500:1988. Specification for unfired fusion welded pressure vessels. Section three. Design. Vessels under external pressure PVE/1 PD :1989 Explanatory supplement to BS 5500:1988. Specification for unfired fusion welded pressure vessels. Section three. Design. Heat exchanger tubesheets PVE/1 PD 6584:1995 Model for a supplier quality assurance assessment questionnaire QS/1 PD 6609:2007 Environmental cleanliness in enclosed spaces. Guide to in situ high efficiency filter leak testing LBI/30 PD 6614:2002 Obsolescence management. Guide to the substitution of components in electronic equipment OS/1 PD 6615:1998 Guide to setting up a parts database OS/1 PD 6667:2000 Obsolescence management. Code of practice for obsolescence notification and support from suppliers of electronic components OS/1 PD :2007 Background paper to the UK National Annex to BS EN B/525/1 PD :2007 Nanotechnologies. Good practice guide for specifying manufactured nanomaterials NTI/1 PD :2007 Nanotechnologies. Guide to safe handling and disposal of manufactured nanomaterials NTI/1 BS 6F 49:2007 Specification for shuttle woven cotton webbing for aerospace purposes ACE/65 BS 2F 151:2007 Specification for shuttleless woven cotton webbing for aerospace purposes ACE/65 BS HR 251:1974 Specification for heat-resisting alloy plate, sheet and strip (Ni 25.5, Cr 14.7, Ti 1. 8, Mn 1.5, Mo 1.2, V 0.3, Fe remainder) ACE/61/-/48 BS MA 28:1973 Specification for dimensions of tracks for mast and deck fittings GME/33 BS MA 29:1982 Specification for steel wire rope and strand for yachts GME/33 BS AU :1994 Tyres and wheels. Tyres. Industrial vehicle tyres. Specification for code-designated series tyres AUE/4 BS AU :1989 Tyres and wheels. Tyres. Code of practice for the storage of tyres, inner tubes and flaps AUE/4 BS AU d:1998 Tyres and wheels. Tyres. General AUE/4 BS AU :1994 Tyres and wheels. Wheels and rims. Specification for road-wheel nuts, studs and bolts for commercial vehicles AUE/4 BS AU a:1983 Tyres and wheels. Wheels and rims. Specification for road wheels manufactured wholly or partly of light alloy for mopeds and motor cycles AUE/4 BS AU a:1985 Tyres and wheels. Wheels and rims. Code of practice for the selection and care of wheels for passenger cars (including caravans and light trailers) AUE/4 BS AU a:1995 Tyres and wheels. Wheels and rims. Code of practice for the selection and care of tyres and wheels for commercial vehicles AUE/4 BS AU c:1996 Tyres and wheels. Wheels and rims. Specification for road wheels manufactured wholly or partly of cast light alloy for passenger cars AUE/4 BS AU :1985 Tyres and wheels. Valves. Code of practice for the selection and care of tyre inflation valves for passenger cars (including caravans and light trailers) AUE/4 BS AU :1985 Tyres and wheels. Valves. Code of practice for the selection and care of tyre inflation valves for commercial vehicles AUE/4 BS AU :1995 Tyres and wheels. Rim profiles and dimensions. Industrial vehicle rims. Specification for rim profiles and dimensions for code-designated series tyres AUE/4 Update Standards October 2012 Prices may be subject to change. 33

34 British Standards Reviewed and Confirmed continued... BS AU 110a:1995 Specification for rubber hoses and hose assemblies for automotive air pressure braking systems PRI/66 BS AU 138b:2000 Towing vehicle, trailer and semi-trailer pneumatic braking systems. Contact type couplings AUE/11 BS AU 144f:1988 Specification for retreaded car and commercial vehicle tyres AUE/3 CP 342-2:1974 Code of practice for centralized hot water supply. Buildings other than individual dwellings B/504 BRITISH STANDARDS PROPOSED FOR WITHDRAWAL A note of any objections to these withdrawals should be sent to Debbie Stead, Head of Committee Service Centre and International Secretariat, BSI Group, 389 Chiswick High Road, London W4 4AL or via to BSUKoperations.review@bsigroup.com by 30 November, Where any standard in this list has been amended since publication, a proposal to withdraw also includes all amendments published to date. BS 921:1976 Specification. Rubber mats for electrical purposes PEL/78 This standard is proposed for withdrawal as it conflicts with BS EN 61111:2009 BRITISH STANDARDS WITHDRAWN If any standard in this list has been amended since publication, all amendments published to date are also withdrawn BS :1991 Methods for analysis and testing of coal and coke. Caking and swelling properties of coal. Determination of crucible swelling number PTI/16 Superseded by BS ISO 501:2012 BS :1997 (ISO 5608:1995) Hardmetal insert tooling. Specification for the designation of turning and copying tool holders and cartridges for indexable (throwaway) inserts 8 Superseded by BS ISO 5608:2012 BS :1997 (ISO :1997) Mechanical vibration. Balance quality requirements of rigid rotors. Balance errors EPL/40X Superseded by BS ISO :2012 BS 7783:1994 (ISO 7966:1993) Acceptance control charts SS/4 Superseded by BS ISO :2012 BS :2004 Constant amplitude dynamic force calibration. Calibration and verification of non-resonant uniaxial dynamic testing systems. Method ISE/NFE/4/6 Superseded by BS ISO :2012 and BS ISO :2012 BS 7950:1997 Specification for enhanced security performance of windows for domestic applications B/538/1 Superseded by PAS 24:2012 BS 8463:2005+A1:2008 Specification for customer billing practice SVS/0/3 Superseded by BS ISO 14452:2012 BS EN 792-7:2001+A1:2008 Hand-held non-electric power tools. Safety requirements. Grinders MCE/8/-/2 Superseded by BS EN ISO :2012 DD ENV :2001 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Unplasticized poly(vinyl chloride) (PVC-U). Guidance for the assessment of conformity PRI/88/1 Superseded by PD CEN/TS :2012 BS EN :2003 Unshaped refractory products. Introduction and classification RPI/1 Superseded by BS EN ISO :2012 DD ENV :2001 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Acrylonitrile-butadienestyrene (ABS). Guidance for the assessment of conformity PRI/88/1 Superseded by PD CEN/TS :2012 DD ENV :2001 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Styrene copolymer blends (SAN + PVC). Guidance for the assessment of conformity PRI/88/1 Superseded by PD CEN/TS :2012 DD ENV :2001 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Chlorinated poly(vinyl chloride) (PVC-C). Guidance for the assessment of conformity PRI/88/1 Superseded by PD CEN/TS :2012 BS EN ISO 3678:1995 (BS 3900-C8:1978) Paints and varnishes. Print-free test STI/10 Superseded by BS EN ISO :2012 BS EN ISO 11562:1997 Geometrical product specifications (GPS). Surface texture: Profile method. Metrological characteristics of phase correct filters TDW/4 Superseded by BS EN ISO :2012 BS EN 12723:2000 Liquid pumps. General terms for pumps and installations. Definitions, quantities, letter symbols and units MCE/6 Superseded by BS EN ISO :2012 BS EN :2003 Leak detection systems. Sensors in monitoring wells PVE/393/2 This standard is withdrawn following the withdrawal by CEN of EN :2003, which was effected by CEN BT ballot 2012/C074 on 16 August CEN parent committee CEN/TC 393 justified this decision on the grounds that sensors are considered in EN ; Part 6 gave no new requirements for the product. EN will be revised together with the other parts of the series of standards BS EN ISO 15415:2005 Information technology. Automatic identification and data capture techniques. Bar code print quality test specification. Twodimensional symbols IST/34 Superseded by BS ISO/IEC 15415:2011 BS EN 25923:1994 (ISO 5923:1989) Fire extinguishing media. Carbon dioxide FSH/18 Superseded by BS EN ISO 5923:2012 BS EN :1996 Combined flexible materials for electrical insulation. Methods of test GEL/15 Superseded by BS EN : Prices may be subject to change. Update Standards October 2012

35 BS EN and 117:2003 Specification for flexible insulating sleeving. Specification requirements for individual types of sleeving. Extruded polychloroprene. General purpose GEL/15/5 Superseded by BS EN :2011 BS EN :2004 Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Specifications for individual materials. Requirements for rigid laminated sheets based on silicone resins GEL/15/6 Superseded by BS EN :2004+A1:2009 BS EN :2004 Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Specifications for individual materials. Requirements for rigid laminated sheets based on polyimide resins GEL/15/6 Superseded by BS EN :2004+A1:2009 BS EN :2006 Caplights for use in mines susceptible to firedamp. Performance and other safety-related matters EXL/31 Superseded by BS EN :2012 BS ISO 2782:2006 Rubber, vulcanized or thermoplastic. Determination of permeability to gases PRI/22 Superseded by BS ISO :2012 and BS ISO :2012 DD CEN ISO/TS 17263:2003 Automatic vehicle and equipment identification. Intermodal goods transport. System parameters EPL/278 Superseded by BS EN ISO 17263:2012 DD ISO/TS :2006 Photography and graphic technology. Extended colour encodings for digital image storage, manipulation and interchange. Reference input medium metric RGB colour image encoding (RIMM-RGB) CPW/42 Superseded by PD ISO/TS :2012 DD ISO/PAS :2006 Road vehicles. Implementation of WWH-OBD communication requirements. General information and use case definition AUE/16 Superseded by BS ISO :2012 DD ISO/PAS :2006 Road vehicles. Implementation of WWH-OBD communication requirements. Common emissions-related data dictionary AUE/16 Superseded by BS ISO :2012 DD ISO/PAS :2006 Road vehicles. Implementation of WWH-OBD communication requirements. Common message dictionary AUE/16 Superseded by BS ISO :2012 DD ISO/PAS :2006 Road vehicles. Implementation of WWH-OBD communication requirements. Connection between vehicle and test equipment AUE/16 Superseded by BS ISO :2012 DD CLC/TS :2004 Rotating electrical machines. Functional evaluation of insulation systems. Test procedures for form-wound windings. Evaluation of thermomechanical endurance of insulation systems PEL/2 Superseded by BS EN :2012 DD IEC/PAS 61906:2005 Procedure for the declaration of materials in products of the electrotechnical and electronics industry GEL/3 Superseded by BS EN 62474:2012 PD CR 13737:2000 Implementation guide for functional standards prepared by CEN/TC 234 Gas supply GSE/33 Superseded by PD CEN/TR :2012 BRITISH STANDARDS UNDER REVIEW The following British Standards implement International and/or European Standards which are currently under review to see if they should be confirmed, revised or withdrawn. Comments should be sent to Debbie Stead, Head of Committee Service Centre and International Secretariat BSI Group, 389 Chiswick High Road, London W4 4AL or via to by 30 November, 2012, in order to be considered by the relevant UK Committee. BS EN 681-1:1996 Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications. Vulcanized rubber PRI/70 NEW WORK STARTED The reference number of the committee responsible for each item of new work started is given after each entry. Where a work item has the temporary designation EN XXXX, it has not yet been allocated a standard number by the European standards body. BS 2780:1983/A1 Glossary of leather terms TCI/69 BS 4163 Health and safety for design and technology in school workshops and other similar establishments. Code of practice will supersede BS 4163:2007 GME/27 BS Flueing and ventilation for gas appliances of rated input not exceeding 70 kw net (1st, 2nd and 3rd family gases). Specification for installation of gas appliances to chimneys and for maintenance of chimneys will supersede BS :2008 GSE/30/-/15 BS 5534 Code of practice for slating and tiling (including shingles) will supersede BS 5534:2003+A1:2010 B/542/1 BS 6635 Manufacture of saddle trees made from wood. Specification will supersede BS 6635:2003 SW/136/14 BS Recharging fire extinguishers (manufactured to BS EN 3 Specification for portable fire extinguishers ). Specification for procedure and materials will supersede BS :1985 FSH/2 BS Recharging fire extinguishers (manufactured to BS EN 3 Specification for portable fire extinguishers ). Specification for powder refill charges will supersede BS :1985 FSH/2 BS :2002/A1 Pendulum testers. Specification B/507/7 Update Standards October 2012 Prices may be subject to change. 35

36 New Work Started continued... BS :2002/A1 Pendulum testers. Method of operation B/507/7 BS :2002/A1 Pendulum testers. Method of calibration B/507/7 BS 8219:2001/A1 Installation of sheet roof and wall coverings. Profiled fibre cement. Code of practice. Installation of sheet roof and wall coverings B/542 BS 8477 Code of practice for customer service will supersede BS 8477:2007 SVS/0 BS 8848 Specification for the provision of visits, fieldwork, expeditions, and adventurous activities [both in and] outside the United Kingdom will supersede BS 8848:2007+A1:2009 SVS/2/5 BS Sustainable development. Management systems standard will partially supersede BS 8900:2006 SDS/1 BS Code of practice for private investigations GW/3/-/19 BS S 536:1970/A2 Specification for low carbon 18/10 chromiumnickel corrosion-resisting steel sheet and strip (500 MPa) ACE/61/-/15 BS S 537:1970/A2 Specification for low carbon 17/12 chromiumnickel-molybdenum corrosion-resisting steel sheet and strip (500 MPa) ACE/61/-/15 BS XXXX Specification for the design and manufacture of metal gutter systems B/542/6/1 PAS 2017 Guide to digital infrastructure and digital services for commercial premises for SMEs EN WI Railway applications. Track. Mechanical requirements for joints in running rails RAE/2 EN WI Railway applications. Wheelsets and bogies. Axles. Design method RAE/3/-/1 EN WI Railway applications. Rolling stock. Head stock layout RAE/3/-/9 EN WI Railway applications. Rolling stock. Requirements for non-destructive testing on running gear in railway maintenance RAE/3/-/1 EN WI Railway applications. Braking. Requirements for the brake systems of a train hauled by a locomotive RAE/4/-/1 EN WI Railway applications. Braking. Wheel slide protection RAE/4/-/1 EN WI Railway applications. Braking. Brake pads RAE/4/-/1 EN WI Railway applications. Acoustics. Measurement of noise inside railbound vehicles EH/1/2 EN Explosive atmospheres. Explosion prevention and protection. Basic concepts and methodology for mining will supersede BS EN :2002+A1:2008 EXL/23 EN Fire resistance tests for loadbearing elements. Floors and roofs will supersede BS EN :2000 FSH/22/-/7 EN 1424 Road marking materials. Premix glass beads will supersede BS EN 1424:1998 B/509/2 EN 1594 Gas infrastructure. Pipelines for maximum operating pressure over 16 bar. Functional requirements will supersede BS EN 1594:2009 GSE/33 EN Steel forgings for pressure purposes. General requirements for open die forgings will supersede BS EN :1998 ISE/111 EN Steel forgings for pressure purposes. Ferritic and martensitic steels with specified elevated temperature properties will supersede BS EN :2000 ISE/111 EN Steel forgings for pressure purposes. Nickel steels with specified low temperature properties will supersede BS EN :1999 ISE/111 EN Steel forgings for pressure purposes. Weldable fine grain steels with high proof strength will supersede BS EN :1999 ISE/111 EN Steel forgings for pressure purposes. Martensitic, austenitic and austenitic-ferritic stainless steels will supersede BS EN :2000 ISE/111 EN Non-destructive testing of steel forgings. Magnetic particle inspection will supersede BS EN :1999 ISE/111 EN Non-destructive testing of steel forgings. Penetrant testing will supersede BS EN :1998 ISE/111 EN Non-destructive testing of steel forgings. Ultrasonic testing of ferritic or martensitic steel forgings will supersede BS EN :1998 ISE/111 EN Non-destructive testing of steel forgings. Ultrasonic testing of austenitic and austeniticferritic stainless steel forgings will supersede BS EN :1999 ISE/111 EN ISO Colorimetry. CIE tristimulus values will supersede BS ISO :2012 STI/14 EN Air conditioners, liquid chilling packages, heat pumps and dehumidifiers with electrically driven compressors for space heating and cooling. Measurement of airborne noise. Determination of the sound power level will supersede BS EN 12102:2008 RHE/17 EN Windows. Classification of mechanical properties. Racking, torsion and operating forces will supersede BS EN 13115:2001 B/ Prices may be subject to change. Update Standards October 2012

37 EN Road lighting. Performance requirments will supersede BS EN :2003 CPL/34/8 EN Railway applications. Track. Switches and crossings for Vignole rails. Crossings with movable parts will supersede BS EN :2006+A1:2011 RAE/2 EN Railway applications. Track. Switches and crossings for Vignole rails. Expansion devices will supersede BS EN :2007+A1:2011 RAE/2 EN Railway applications. Track. Switches and crossings for Vignole rails. Layouts will supersede BS EN :2006+A1:2011 RAE/2 EN Railway applications. Wheelsets and bogies. Product requirements. Subsystems and components will supersede BS EN 13262:2004+A2:2011 RAE/3/-/1 EN Swimming pool equipment. Additional specific safety requirements and test methods for lane lines will supersede BS EN :2001 SW/136/8 EN Railway applications. Wheelsets and bogies. Wheels. Tread profile will supersede BS EN 13715:2006+A1:2010 RAE/3/-/1 EN Cylindrical helical springs made from round wire and bar. Calculation and design. Compression springs will supersede BS EN :2002 FME/9/3 EN Cylindrical helical springs made from round wire and bar. Calculation and design. Extension springs will supersede BS EN :2001 FME/9/3 EN Textiles. Laundry processed textiles. Biocontamination control system will supersede BS EN 14065:2002 TCI/82/1 EN Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling. Terms and definitions will supersede BS EN :2011 RHE/17 EN Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling. Test conditions will supersede BS EN :2011 RHE/17 EN Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling. Requirements will supersede BS EN :2011 RHE/17 EN Railway applications. Air conditioning for driving cabs. Comfort parameters will supersede BS EN :2006 RAE/4/-/3 EN Railway applications. Air conditioning for urban and suburban rolling stock. Type tests will supersede BS EN :2006 RAE/4/-/3 EN Railway applications. Air conditioning of driving cabs. Comfort parameters will supersede BS EN :2006+A1:2010 RAE/4/-/3 EN Railway applications. Air conditioning for driving cabs. Type tests will supersede BS EN :2006+A1:2010 RAE/4/-/3 EN Railway applications. Front windscreens for train cabs will supersede BS EN 15152:2007 RAE/4/-/2 EN Air conditioners and liquid chilling packages with evaporatively cooled condenser and with electrically driven compressors for space cooling. Terms, definitions, test conditions, test methods and requirements will supersede BS EN 15218:2006 RHE/17 EN Railway applications. Line categories for managing the interface between load limits of vehicles and infrastructure will supersede BS EN 15528:2008 RAE/1/-/8 EN Ventilation for buildings. Fire dampers will supersede BS EN 15650:2010 RHE/2 EN Railway applications. Measurement of wheel and axle loads. Approval and verification of interoperable local measuring sites in-service RAE/1/-/8 EN Railway applications. Track. Noise barriers and related devices acting on airborne sound propagation. Test method for determining the acoustic performance. Intrinsic characteristics. In situ values of sound diffraction under direct sound field conditions RAE/2 EN Railway applications. Ballastless track systems. Subsystems and components RAE/2 EN Railway applications. Ballastless track systems. Acceptance RAE/2 EN Test method for the determination of the degree of soil acidity according to Baumann- Gully B/517/1 EN ISO Health and safety in welding and allied processes. Transparent welding curtains, strips and screens for arc welding processes WEE/40 EN Fibre organisers and closures to be used in optical fibre communication systems. Product specifications. Wall outlet GEL/86/2 EN Information technology. Data centre facilities and infrastructures. Building construction TCT/7 EN Information technology. Data centre facilities and infrastructures. Power distribution TCT/7 EN Vehicles; boats and internal combustion engines. Radio disturbance characteristics. Limits and methods of measurement for the protection of on-board receivers GEL/210/11 Update Standards October 2012 Prices may be subject to change. 37

38 New Work Started continued... EN Explosive atmospheres. Classification of areas. Combustible dust atmospheres will supersede BS EN :2009 EXL/31 EN Explosive atmospheres. Equipment protection by encapsulation m will supersede BS EN :2009 EXL/31 EN Railway applications. Traction transformers and inductors on board rolling stock will supersede BS EN 60310:2004 GEL/9/2 EN :2005/AMD Household and similar electrical appliances. Safety. Particular requirements for electric fence energizers CPL/61/8 EN :2008/A1 Medical electrical equipment. General requirements for basic safety and essential performance. Collateral standard. Radiation protection in diagnostic X-ray equipment will supersede BS EN :2008 CH/62/2 EN :2008/A1 Medical electrical equipment. General requirements for basic safety and essential performance. Collateral standard. Requirements for environmentally conscious design will supersede BS EN :2008 CH/62/1 EN :2008/A1 Medical electrical equipment. General requirements for basic safety and essential performance. Collateral standard. Requirements for the development of physiologic closed-loop controllers will supersede BS EN :2008 CH/62/1 EN Semiconductor devices. Discrete devices. Thyristors will supersede BS IEC :2000 EPL/47 CLC/TS Short-circuit currents. Calculation of effects. Examples of calculation will supersede PD :1995 PEL/73 EN Short-circuit currents in three-phase a.c. systems. Calculation of currents PEL/73 EN Short-circuit currents in three.phase a.c. systems. Calulataion of currents will supersede BS EN :2001 PEL/73 EN Connectors for electronic equipment. Product requirements. Detail specification for 8-way; shielded free and fixed connectors for data transmissions with frequencies up to 1000 MHz will supersede BS EN :2006 EPL/48 EN Connectors for electronic equipment. Product requirements. Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 2000 MHz will supersede BS EN :2006 EPL/48 EN Coaxial communication cables. Blank detail specification for semi-rigid cables with polytetrafluoroethylene (PTFE) dielectric EPL/46 EN :2010/A1 Live working. Voltage detectors. Two-pole lowvoltage type PEL/78 EN Industrial process control. Safety of analyzer houses GEL/65 EN Standard data element types with associated classification scheme for electric components. Extensions to the EXPRESS dictionary schema will supersede BS EN :2004 GEL/3 EN Electric vehicle conductive charging system. Electric vehicle onboard charger EMC requirements for conductive connection to a.c./d.c. supply PEL/69 EN Specification of the Radio Data System (RDS) for VHF/FM sound broadcasting in the frequency range from 87;5 to 108;0 MHz (TA 1) will supersede BS EN 62106:2009 EPL/100 EN Fuel cell technologies. Micro fuel cell power systems. Power and data interchangeability GEL/105 EN Radio Data System (RDS). Receiver products and characteristics. Methods of measurement (TA 1) will supersede BS EN 62634:2011 EPL/100 EN Digital Terrestrial Television Receivers for the DTMB system EPL/100 EN Assessment of electric welding equipment related to restrictions of human exposure to electromagnetic fields (0 Hz-300 GHz). Product family standard WEE/6 EN Assessment of electric welding equipment related to restrictions of human exposure to electromagnetic fields (0 Hz-300 GHz). Basic standard for arc welding WEE/6 EN Surface cleaning appliances. Floor treatment machines, with or without traction drive, for commercial use. Methods of measuring the performance CPL/59/6 EN Medical electrical equipment. Particular requirements for the basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery will supersede BS EN :2009+A11:2011 CH/62 ISO Measurement of noise emitted by accelerating road vehicles. Engineering method. Compatibility between indoor and outdoor testing of road vehicles EH/1/2 ISO Solid mineral fuels. Vocabulary. Terms relating to sampling, testing and analysis will supersede BS 3323:1992 PTI/16 ISO 2394 General principles on reliability for structures B/525/1 ISO 3600 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment. Operator s manuals. Content and presentation AGE/6 ISO Tractors, machinery for agriculture and forestry, powered lawn and garden equipment. Symbols for operator controls and other displays. Common symbols will supersede BS ISO :1998+A2:2012 AGE/6 ISO Tractors, machinery for agriculture and forestry, powered lawn and garden equipment. Symbols for operator controls and other displays. Symbols for agricultural tractors and machinery will supersede BS ISO :2008 AGE/6 38 Prices may be subject to change. Update Standards October 2012

39 ISO Tractors, machinery for agriculture and forestry, powered lawn and garden equipment. Symbols for operator controls and other displays. Symbols for powered lawn and garden equipment AGE/6 ISO Tractors, machinery for agriculture and forestry, powered lawn and garden equipment. Symbols for operator controls and other displays. Symbols for forestry machinery will supersede BS ISO :1993+A2:2008 AGE/6 ISO Cardiovascular implants. Cardiac valve prostheses. General requirements CH/150/2 ISO 7364 Shipbuilding and marine structures. Deck machinery. Accommodation ladder winches SME/32/-/1 ISO Reciprocating internal combustion engines. Exhaust emission measurement. Engine family determination will supersede BS ISO :1996 MCE/14/-/3 ISO Reciprocating internal combustion engines. Exhaust emission measurement. Engine group determination will supersede BS ISO :1996 MCE/14/-/3 ISO/IEC 8484 Information technology. Magnetic stripes on savings books will supersede BS ISO/IEC 8484:2007 IST/17 ISO Iron ores. Determination of various elements by X-ray fluorescence spectrometry. Comprehensive procedure ISE/58 ISO Aerospace. Self-propelled de-icing/anti-icing vehicles. Functional requirements will supersede BS M77:1994 ACE/57 ISO Quality of dialysis fluid for haemodialysis and related therapies will supersede BS ISO 11663:2009 CH/150/2 ISO Hydraulic fluid power. Spin-on filters with finite lives. Method for verifying the fatigue life rating and the burst pressure rating of the pressure containing envelope MCE/18/-/6 ISO Electro-optical systems. Cavity ring-down technique for high-reflectance measurement CPW/172 ISO Industrial furnace and associated processing equipement. Safety. Protective systems RHE/13 ISO Yachting clubs. The standardization of tourist services in yachting clubs and marinas SVS/2 ISO Irrigation equipment. Safety devices for chemigation. Chemigation valve assemblies from DN 75 to DN 350 AGE/30 ISO Concentrates for haemodialysis and related therapies CH/150/2 ISO Water for haemodialysis and related therapies will supersede BS ISO 13959:2009 CH/150/2 ISO Aerospace. Hydraulic systems. Filter elements in filters. Test methods. Qualification procedures ACE/69 ISO Aerospace. Hydraulic systems. Filter elements in filters. Test methods. Conditioning ACE/69 ISO Aerospace. Hydraulic systems. Filter elements in filters. Test methods. Filtration efficiency ACE/69 ISO Aerospace. Hydraulic systems. Filter elements in filters. Test methods. Retention capacity and burst/collapse pressure ACE/69 ISO Aerospace. Hydraulic systems. Filter elements in filters. Test methods. Resistance to flow fatigue ACE/69 ISO Aerospace. Hydraulic systems. Filter elements in filters. Test methods. Cleanliness level ACE/69 ISO/IEC :2010/A3 Information technology. Coding of audio-visual objects. Audio conformance IST/37 ISO Intelligent transport systems. Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV). Regulated applications EPL/278 ISO Intelligent transport systems. Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV). Vehicle access monitoring (VAM) EPL/278 ISO Intelligent transport systems. Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV). Remote electronic tachograph monitoring (RTM) EPL/278 ISO Intelligent transport systems. Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV). Emergency messaging system/ecall (EMS) EPL/278 ISO Intelligent transport systems. Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV). Driver work records (work and rest hours compliance) (DWR) EPL/278 ISO Intelligent transport systems. Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV). Vehicle mass monitoring (VMM) EPL/278 ISO Intelligent transport systems. Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV). Mass Penalties and Levies (VMC) EPL/278 ISO Intelligent transport systems. Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV). Vehicle access control (VAC) EPL/278 ISO Intelligent transport systems. Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV). Vehicle location monitoring (VLM) EPL/278 Update Standards October 2012 Prices may be subject to change. 39

40 New Work Started continued... ISO Intelligent transport systems. Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV). Vehicle speed monitoring (VSM) EPL/278 ISO Intelligent transport systems. Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV). Consignment and location monitoring (CLM) EPL/278 ISO Intelligent transport systems. Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV). ADR (Dangerous Goods) transport monitoring (ADR) EPL/278 ISO Intelligent transport systems. Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV). Vehicle parking facilities (VPF) EPL/278 ISO Road vehicles. Water separation efficiency of fuel filter systems for diesel engine application MCE/21/6 ISO Application of statistical and related methods to New technology and Product Development Process. General Principle and Perspective of QFD Process MS/6 ISO Application of statistical and related methods to New technology and Product Development Process. Acquisition of non-quantitative VOC or VOS MS/6 ISO Application of statistical and related methods to New technology and Product Development Process. Acquisition of Quantitative VOC or VOS MS/6 ISO Application of statistical and related methods to New technology and Product Development Process. Analysis of Non-Quantitative and Quantitative VOC/VOS MS/6 ISO Application of statistical and related methods to New technology and Product Development Process. Solution Strategy MS/6 ISO Application of statistical and related methods to New technology and Product Development Process. Optimization. Robust parameter design MS/6 ISO Application of statistical and related methods to New technology and Product Development Process. Optimization. Tolerance design and output to manufacturing MS/6 ISO Application of statistical and related methods to New technology and Product Development Process. Guidelines for Commercialization MS/6 ISO Preparation and visualization of RGB images to be used in RGB-based graphic arts workflows PAI/43 ISO Space systems. Simulation requirements for control system ACE/68 ISO Road vehicles. Controller area network (CAN). High-speed medium access unit with selective wake-up functionality. Conformance test plan AUE/16 ISO Retail Financial Services Compliance Guideline. PIN Security and Key Management IST/12 ISO Respiratory protective devices. Methods of test and test equipment. Mechanical resistance/strength of components PH/4/11 ISO Respiratory protective devices. Methods of test and test equipment. Practical performance test method PH/4/11 ISO Respiratory protective devices. Methods of test and test equipment. RPD using regenerated breathable gas and special application mining escape RPD. Consolidated test for gas concentration, temperature, humidity, work of breathing, breathing resistance and duration PH/4/11 ISO Compressed natural gas (CNG) vehicle filling stations will supersede BS :1981 GSE/40 ISO Liquefied natural gas (LNG) vehicle filling stations will supersede BS :1981 GSE/40 ISO Soil quality. Screening soils for alcohol-extracted organic compounds by turbidity analysis EH/4 ISO Road vehicles. Video communication interface for cameras (VCIC). Camera message dictionary AUE/16 ISO Dentistry. Springs for use in orthodontics CH/106 ISO Space systems. Programme management. Statement of work ACE/68 ISO Ethanol. Determination of total acidity by potenciometric titration PTI/13 ISO/TS Health informatics. Structure and maintenance of the health informatics glossary IST/35 ISO Microbiology of food and animal feeding stuffs. Technical requirements and guidance on establishment or revision of standard methods AW/9 ISO Ships and marine technology. Metal valves for use in flanged pipe. Face to face and centre to face dimensions SME/32/-/3 ISO Animal and vegetable fats and oils. Determination of aliphatic hydrocarbons in vegetable oils AW/307 ISO/IEC PHY and MAC Layer Protocol of In-band Control for Wireless Power Transfer IST/6 ISO Tourist services for public use provided by natural protected areas authorities SVS/2/10 ISO Ships and marine technology. Navigation and shallow-water engineering vessels. Anchor winches SME/32/-/4 40 Prices may be subject to change. Update Standards October 2012

41 ISO Ships and marine technology. Ship-shifting winches SME/32/-/4 ISO Animal and vegetable fats and oils. Determination of conventional mass per volume (litre weight in air). Oscillating U-tube method AW/307 ISO Radiological protection. Measurements and prediction of the ambient dose rate from patient receiving radioiodine administration after thyroidablation NCE/2 ISO Fibre-reinforced polymer (FRP) reinforcement for concrete structures. Specifications of FRP sheets B/517 ISO Metallic materials. Torsion test at ambient temperature ISE/101/2 ISO/TS Endotherapy devices. Trocar pins, trocar sleeves and endotherapy devices for use with trocar sleeves CPW/172 ISO Endotherapy devices. Eyepiece funnel and light guide connector CPW/172 ISO Geographic information. Ontology. Rules for developing ontologies in the Web Ontology Language (OWL) IST/36 ISO/IEC Information technology. Service management. Process reference model IST/15 ISO Textile machinery. Draw frame for cotton spinning. Vocabulary and principles of construction will supersede BS ISO 21485:2006 TCI/33 ISO Solar energy. Collector components and materials. Evacuated tubes. Durability and performance RHE/25 ISO Solar energy. Collector components and materials. Heat-pipe for evacuated tubes. Durability and performance RHE/25 ISO/IEC :2012/A1 Information technology. Dynamic adaptive streaming over HTTP (DASH). Media presentation description and segment formats IST/37 ISO Guidance for the preparation and quality management of fluids for haemodialysis and related therapies will supersede BS ISO 23500:2011 CH/150/2 ISO Textiles. Methods for determination of certain aromatic amines derived from azo colorants. Detection of the use of certain azo colorants accessible with and without extracting the fibres TCI/80 ISO/IEC Systems engineering. Application and management of the systems engineering process IST/15 ISO Water treatment equipment for haemodialysis applications and related therapies will supersede BS ISO 26722:2009 CH/150/2 ISO Aerosol particle number concentration. Calibration of condensation particle number counters LBI/37 ISO/IEC TR Biometrics. Use of mobile biometrics for personalization and authentication IST/44 ISO/IEC TR Information technology. Security techniques. Detailing software penetration testing under ISO/IEC and ISO/IEC vulnerability analysis IST/33 ISO/IEC Information technology. Sensor Networks. Generic Sensor Network Application Interface ICT/-/1 ISO Communities sustainable development and resilience. Management system SES/1/4 ISO/IEC In cable control and protectivedevice for mode 2 charging of electric road vehicles. (IC-RCD) PEL/69 IEC/PAS Methods of measurment and limits for radiated disturbances from plasma display panel TVs in the frequency range 150 khz to 30 MHz GEL/210/11 IEC/TS Test report format for the refrigerator performance standard IEC CPL/59/13 DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT NATIONAL BRITISH STANDARDS You may comment online on any British Standard of national origin using the BSI Draft Review system. All you need to do is register at This service is free of charge. Deadlines for receipt of comments on each of the individual drafts can be found at The deadline for the following drafts is 30 November, 2012 unless otherwise stated. If you would like to receive these drafts in hard copy format, they are available for a fee from BSI Customer Services (see How to order on page 2). 12/ DC BS Design management systems. Guide to managing design in construction B/555 12/ DC BS 8568 Cleanroom energy. Code of practice for improving energy efficiency in cleanrooms and clean air devices LBI/30 12/ DC BS 8576 Guidance on investigations for ground gas. Permanent gases and Volatile Organic Compounds (VOCs) EH/4 12/ DC BS Testing concrete. Methods for mixing and sampling fresh concrete in the laboratory B/517/1 12/ DC BS Fire detection and fire alarm systems for buildings. Code of practice for the design, installation, commissioning and maintenance of voice alarm systems FSH/12/5 Update Standards October 2012 Prices may be subject to change. 41

42 Drafts for Public Comment continued... 12/ DC BS Testing concrete. Method for temperature-matched curing of concrete specimens B/517/1 12/ DC BS Fire detection and fire alarm systems for buildings. Code of practice for design, installation, commissioning and maintenance members, non-members FSH/12/1 12/ DC BS 646 A2 Specification. Cartridge fuse-links (rated up to 5 amperes) for a.c. and d.c. service PEL/32 12/ DC BS 2HC 101 A3 Precipitation hardening chromium-nickel-copper-molybdenum steel castings (950 MPa) (Cr 14.0, Ni 4.5, Cu 2.5, Mo 1.5). Specification for precipitation hardening ACE/61 12/ DC BS 2HC 102 A3 Specification for precipitation hardening chromium-nickel-coppermolybdenum steel castings (1250 MPa) (Cr 14.0, Ni4.5, Cu 2.5, Mo 1.5) ACE/61 12/ DC BS HC 104 A3 Specification for 19% chromium- 10% nickel niobium-stabilized corrosionresisting steel castings (460 MPa) ACE/61 12/ DC BS S 524 A4 Specification for cold-rolled 18/10 chromium-nickel corrosion-resisting steel sheet and strip (titanium stabilized: 800 Mpa) ACE/61 12/ DC BS S 526 A4 Specification for softened 18/10 chromium-nickel corrosion-resisting steel sheet and strip (titanium stabilized: 540 MPa) ACE/61 12/ DC BS S 527 A3 Specification for softened 18/10 chromium-nickel corrosion-resisting steel sheet and strip (niobium stabilized: 540 MPa) ACE/61 12/ DC BS S 525 A4 Specification for cold-rolled 18/10 chromium-nickel corrosion-resisting steel sheet and strip (niobium stabilized: 800 MPa) ACE/61 12/ DC BS A1 Pendulum testers. Specification B/507/7 Comments for the above document are required by 16 November, / DC BS A1 Pendulum testers. Method of operation B/507/7 Comments for the above document are required by 16 November, / DC BS A1 Pendulum testers. Method of calibration B/507/7 Comments for the above document are required by 16 November, / DC BS 2780 A1 Glossary of leather terms TCI/69 DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT ADOPTIONS You may comment online on draft standards issued by CEN and ISO. The BSI Draft Review system has been modified to accommodate a wider range of standards content. The purpose of the website is to enhance access to Drafts for Public Comment for the wider community, make comments more visible and move into collaborative working practices. All you need to do is register at This service is free of charge. Please note that CENELEC and IEC standards are not included on the BSI Draft Review system at this time, but are available in hard copy format from BSI Customer Services. All draft British Standards are available in hard copy format from BSI Customer Services (see How to order on page 2). Most drafts are charged at to members and for non-members. Larger draft documents are charged at a higher price according to the number of pages and, are priced individually below. Comments on all Draft British Standards are welcome and should be sent to Debbie Stead, Head of Committee Service Centre and International Secretariat, BSI Group, 389 Chiswick High Road, London W4 4AL by 30 November, 2012 unless otherwise stated, to be considered by the relevant BSI committee. Draft standards may be modified before adoption and issue as British Standards. 12/ DC BS EN Railway applications. Braking. Brake blocks members, non-members RAE/4/-/1 12/ DC BS ISO Steel and iron. Determination of calcium and magnesium. Inductively coupled plasma atomic emission spectrometric method ISE/102 12/ DC BS EN Pumps. Minimum required efficiency of rotodynamic water pumps MCE/6 12/ DC BS EN ISO Ophthalmic optics. Contact lenses. Tolerances CH/172/9 12/ DC BS EN ISO Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMS). Laser trackers for measuring point-to-point distances TDW/4 12/ DC BS EN A1 Railway applications. Fixed installations. Electric traction overhead contact lines GEL/9/3 Comments for the above document are required by 31 December, / DC BS ISO Rubber and plastics hoses and hose assemblies, wire- or textile-reinforced, for hydraulic jacks and for hydraulic power units used in hydraulic tools. Specification PRI/66 12/ DC BS ISO Steel wire ropes. Determination of the compliance characteristics of steel wire ropes subjected to lateral load MHE/2 12/ DC BS EN ISO Health informatics. Categorical structures for representation of nursing diagnoses and nursing actions in terminological systems IST/35 12/ DC BS IEC Radiation protection instrumentation. Measuring the imaging performance of X-ray systems for security screening of humans NCE/2 12/ DC BS EN Railway applications. Track. Trailers and associated equipment. General safety requirements RAE/2 12/ DC BS EN Railway applications. Track. Demountable machines and associated equipment. General safety requirements RAE/2 42 Prices may be subject to change. Update Standards October 2012

43 12/ DC BS EN Industrial trucks. Safety requirements and verification. Supplementary requirements for pedestrian-propelled trucks MHE/7 12/ DC BS EN Water quality. Performance requirements and conformity test procedures for water monitoring equipment. Automated sampling devices (samplers) for water and waste water EH/3 Comments for the above document are required by 9 December, / DC BS ISO Nuclear energy. Determination of total hydrogen content in PuO 2 and UO 2 powders and UO 2, (U,Gd)O 2 and (U,Pu)O 2 sintered pellets. Inert gas extraction and conductivity detection method NCE/9 12/ DC BS ISO Nuclear energy. Determination of nitrogen content in UO 2, (U, Gd)O 2 and (U,Pu)O 2 sintered pellets. Inert gas extraction and conductivity detection method NCE/9 12/ DC BS EN Wind turbines. Small wind turbines members, non-members PEL/88 Comments for the above document are required by 25 December, / DC BS EN LPG equipment and accessories. Cylinder and drum marking PVE/19 Comments for the above document are required by 31 December, / DC BS ISO Nuclear energy. Nuclear fuel technology. Theoretical activation calculation method to evaluate the radioactivity of activated waste generated at nuclear reactors NCE/9 12/ DC BS EN Management and control of operational activities in drain and sewer systems outside buildings. Cleaning B/505 Comments for the above document are required by 19 December, / DC BS ISO A1 Geometrical product specifications (GPS). Dimensional tolerancing. Linear sizes TDW/4 12/ DC BS ISO/IEC Information technology. Media context and control. Architecture IST/37 12/ DC BS ISO Adhesives. Test methods for isotropically electrically conducting adhesives. Determination of high-speed signaltransmission characteristics PRI/52 12/ DC BS EN 289 Plastics and rubber machines. Compression moulding machines and transfer moulding machines. Safety requirements MCE/3/2 12/ DC BS EN Plastics and rubber machines. Tyre curing presses. Safety requirements MCE/3/2 12/ DC BS ISO Test conditions for die sinking electro-discharge machines (EDM). Terminology and testing of accuracy. Single-column machines (cross-slide table type and fixed-table type) /2 12/ DC BS ISO Test conditions for die sinking electro-discharge machines (EDM). Terminology and testing of accuracy. Double-column machines (slide-head type and cross-slide table type) /2 12/ DC BS EN A1 Railway applications. Rolling stock equipment. Capacitors for power electronics. Electric double-layer capacitors GEL/9/2 12/ DC BS EN Electric cables. Guide to use for cables with a rated voltage not exceeding 450/750 V. Specific guidance related to EN cable types GEL/20/17 12/ DC BS EN 1307 Textile floor coverings. Classification PRI/3/60 Comments for the above document are required by 31 December, / DC BS EN ISO 9539 A1 Gas welding equipment. Materials for equipment used in gas welding, cutting and allied processes WEE/18 12/ DC BS ISO Ships and marine technology. Marine evacuation systems. Determination of capacity SME/32/-/1 12/ DC BS EN ISO Anaesthetic and respiratory equipment. Conical connectors. Cones and sockets CH/121/1 12/ DC BS ISO 2789 Information and documentation. International library statistics IDT/2/15 12/ DC BS EN Protective clothing. Body armour. General requirements PH/3/5 12/ DC BS EN Protective clothing. Body armour. Bullet resistance, requirements and test methods PH/3/5 12/ DC BS EN Protective clothing. Body armour. Knife and spike resistance. Requirements and test methods PH/3/5 12/ DC BS EN Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems. System S. Dimensions B/505 Comments for the above document are required by 8 January, / DC BS ISO A1 Resilient and textile floorcoverings. Determination of side length, edge straightness and squareness of tiles PRI/3/60 Comments for the above document are required by 22 October, / DC BS ISO A1 Road vehicles. Test methods for electrical disturbances from electrostatic discharge AUE/16 Comments for the above document are required by 9 November, / DC BS EN ISO Indoor air. Investigation of buildings for pollutants and other injurious factors. Inspections EH/2/3 Comments for the above document are required by 7 December, / DC BS EN ISO 3040 A1 Geometrical product specifications (GPS). Dimensioning and tolerancing. Cones TDW/4 Update Standards October 2012 Prices may be subject to change. 43

44 Drafts for Public Comment continued... 12/ DC BS EN ISO Ophthalmic instruments. Refractor heads CH/172/6 12/ DC BS EN 1859 A1 Chimneys. Metal chimneys. Test methods B/506 12/ DC BS EN 1935 Building hardware. Single-axis hinges. Requirements and test methods B/538 12/ DC BS EN Furniture. Chairs and tables for educational institutions. Functional dimensions FW/0/4 Comments for the above document are required by 14 December, / DC BS EN Safety of woodworking machines. Circular sawing machines. Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches MTE/23 Comments for the above document are required by 31 December, / DC BS ISO/IEC Information technology. Dynamic adaptive streaming over HTTP (DASH). Segment encryption and authentication IST/37 12/ DC BS EN A3 Domestic cooking appliances burning gas. Safety. General GSE/35 12/ DC BS EN 71-1 A3 Safety of toys. Mechanical and physical properties CW/15 12/ DC BS EN 643 Paper and board. European list of standard grades of paper and board for recycling PAI/11 12/ DC BS EN Liquid petroleum products. Determination of total contamination in middle distillates, diesel fuels and fatty acid methyl esters PTI/13 Comments for the above document are required by 12 December, / DC BS EN Safety of toys. Trampolines for domestic use CW/15 Comments for the above document are required by 2 December, / DC BS EN 488 A1 District heating pipes. Preinsulated bonded pipe systems for directly buried hot water networks. Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene RHE/9 12/ DC BS EN Plastics. Method for accelerated photoageing using medium pressure mercury vapour lamps PRI/21 12/ DC BS ISO Health informatics. Health cards. General characteristics IST/35 Comments for the above document are required by 12 October, / DC BS ISO A1 Rapeseed. Determination of glucosinolates content. Method using highperformance liquid chromatography AW/307 12/ DC BS EN Swimming pool equipment. Additional specific safety requirements and test methods for diving platforms, diving springboards and associated equipment SW/136/8 12/ DC BS EN Swimming pool equipment. Additional specific safety requirements and test methods for movable pool floors and movable bulkheads SW/136/8 12/ DC BS EN 35 Pedestal and wall-hung bidets with over-rim supply. Connecting dimensions B/503 12/ DC BS EN Founding. Technical conditions of delivery. Additional requirements for steel castings ISE/111 12/ DC BS EN Mobile fire extinguishers. Requirements for the construction, pressure resistance and mechanical tests for extinguishers, with a maximum allowable pressure equal to or lower than 30 bar, which comply with the requirements of EN FSH/2 12/ DC BS EN LPG equipment and accessories. Pressure relief valves for LPG pressure vessels. Ancillary equipment PVE/19 Comments for the above document are required by 31 December, / DC BS EN ISO Thermal spraying. Spraying and fusing of self-fluxing alloys STI/40 12/ DC BS EN Explosion isolation flap valves EXL/23 12/ DC BS EN Common control interface for networked digital audio and video products. Transmission over networks. Signalling (TA 4) EPL/100 Comments for the above document are required by 30 October, / DC BS EN Electrical equipment for furnaces and ancillary equipment. Requirements for design, development and type approval of safety devices and subsystems PEL/27 12/ DC BS EN 6XXXX-3-1 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety. Particular requirements for transportable table saws CPL/116/3 12/ DC BS EN 6XXXX-3-6 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety. Particular requirements for diamond drills with liquid system (supersedes BS EN :2010) CPL/116/3 12/ DC BS EN Thermal insulation products for building equipment and industrial installations. Factory made expanded perlite (EP) and exfoliated vermiculite (EV) products. Specification B/540/6 Comments for the above document are required by 31 October, / DC BS EN AB Household and similar electrical appliances. Safety. Particular requirements for washing machines CPL/61/14 12/ DC BS EN A1 Overall efficiency of grid connected photovoltaic inverters GEL/82 Comments for the above document are required by 16 November, / DC BS EN A1 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations. General requirements PEL/23 12/ DC BS EN Boxes and enclosures for electrical accessories for household and similar fixed electrical installations. Particular requirements for enclosures for housing protective devices and other power dissipating electrical equipment PEL/23 44 Prices may be subject to change. Update Standards October 2012

45 12/ DC BS EN AB Detail specification. Fixed low power film SMD resistors. Cylindrical. Stability classes 0,05. 0,1. 0,25. 0, EPL/40X Comments for the above document are required by 15 October, / DC BS ISO Tyre valves. ISO core chambers No. 1, No. 2, No. 3 and No. 4 AUE/4 12/ DC BS EN Short-circuit currents in three.phase A.C. systems. Calculation of currents PEL/73 Comments for the above document are required by 15 October, / DC BS EN Connectors for electronic equipment. Product requirements. Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 2000 MHz EPL/48 Comments for the above document are required by 15 October, / DC BS EN Requirements for the connection of micro-generators in parallel with public lowvoltage distribution networks GEL/8 12/ DC BS ISO/IEC Information technology. OMG Business Process Model and Notation (OMG BMPN) members, non-members ICT/-/1 12/ DC PD ISO/IEC TS Conformity Assessment. Requirements for bodies providing audit and certification of management systems. Competence requirements for auditing and certification of quality management systems CAS/1 Comments for the above document are required by 31 October, / DC BS EN Aerospace series. Bonding straps for aircraft. Round bonding straps copper, tin plated. 65ºC up to 150ºC and nickel plated. 65ºC up to 260ºC Product Standard ACE/6 12/ DC BS EN Aerospace series. Electrical cables, installation. Protection sleeve in metaaramid fibres. Technical specification ACE/6 12/ DC BS EN Aerospace series. Cable, electrical, aircraft use. Test methods. Resistance to fluids ACE/6 12/ DC BS EN 4827 Aerospace series. Hexavalent chromium free anodizing of aluminium and aluminium alloys ACE/65 12/ DC BS EN A1 Consumer audio/video equipment. Digital interface. Transmission of ITU-R BT.601 style digital video data (TA 4) EPL/100 Comments for the above document are required by 30 October, / DC BS ISO GUIDE 80 Guidance for in-house production of reference materials for quality control (QCMs) RMI/1 12/ DC BS EN Electronics assembly technology. Endurance test methods for solder joint of area array type package surface mount devices EPL/501 Comments for the above document are required by 9 October, 2012 DOCUMENTS NOT ISSUED AS DPCs Comments can be sent by or by post to named contacts at: BSI Group 389 Chiswick High Road London W4 4AL Tel: EN 1949:2011/FprA1 Specification for the installation of LPG systems for habitation purposes in leisure accommodation vehicles and accommodation purposes in other vehicles CEN have circulated the above draft amendment under the shortened UAP procedure. Copies of the draft may be obtained on request from the contact point (below). Contact: Committee Service Centre csc@bsigroup.com GSE/24 IEC Electric cables. Calculation of the current rating. Sections on operating conditions. Economic optimization of power cable size The National committee intend to implement this standard as BS IEC :2012 (BS :2012) which was not circulated as a Draft for public comment. If anyone wishes to comment on this proposal please contact the Programme Manager (below). Contact: Simon Bounds simon.bounds@bsigroup.com GEL/20/16 ISO/FDIS Graphic technology and photography. Colour characterisation of digital still cameras (DSCs). Stimuli, metrology and test procedures The above has been circulated for ballot at FDIS stage. Copies of the draft are available from the contact point (below). Contact: Committee Service Centre csc@bsigroup.com CPW/42 pren ISO 2553 Welding and allied processes. Symbolic representation on drawings. Welded, brazed and soldered joints This document is circulated for second enquiry. Comments should be sent by 16 October, 2012 to the Programme Manager (below). Contact: Sarah Meagher sarah.meagher@bsigroup.com WEE/1 pren Child protective products. Consumer fitted child resistant locking devices for windows and balcony doors. Safety requirements and test methods This document is now out for Formal Vote, having not previously being circulated as a DPC. Copies of the draft are availble on request from the Programme Manager (below). Contact: Alan Hall alan.hall@bsigroup.com B/538 FprEN ISO (ISO/FDIS :2012) Hand-held non-electric power tools. Safety requirements. Drills and tappers MCE/8/-/2 FprEN ISO (ISO/FDIS :2012) Hand-held non-electric power tools. Safety requirements. Non-rotary percussive power tools MCE/8/-/2 FprEN ISO (ISO/FDIS :2012) Hand-held non-electric power tools. Safety requirements. Assembly power tools for threaded fasteners The above mentioned documents have been issued under the parallel UAP/ISO FDIS procedure. Copies of the drafts are available from the contact point (below). Contact: Committee Service Centre csc@bsigroup.com MCE/8/-/2 FprEN 3861 Aerospace series. Non-metallic materials. Glass transparencies. Material standard. Thermally tempered soda lime float glass ACE/65 Update Standards October 2012 Prices may be subject to change. 45

46 Documents Not Issued as DPCs continued... FprEN 3862 Aerospace series. Non-metallic materials. Glass transparencies. Material standard. Chemically tempered soda lime float glass ACE/65 FprEN 3863 Aerospace series. Non-metallic materials. Glass transparencies. Test methods. Determination of flatness ACE/65 FprEN 3866 Aerospace series. Non-metallic materials. Glass tranparencies. Test methods. Determination of ream and surface ripple ACE/65 FprEN 4106 Aerospace series. Non-metallic materials. Structural adhesive systems. Paste adhesive. Technical specification ACE/65 FprEN 4488 Aerospace series. Non-metallic materials. Anaerobic polymerisable compounds. Threadlocking. Torque strength 2 Nm ACE/65 FprEN 4491 Aerospace series. Non-metallic materials. Anaerobic polymerisable compounds. Threadlocking. Torque strength 16 Nm ACE/65 FprEN 4492 Aerospace series. Non-metallic materials. Anaerobic polymerisable compounds. Threadlocking. Torque strength 19 Nm The above mentioned documents have been issued at CEN Formal Vote stage. Copies of the draft are available on request from the contact point (below). Contact: Committee Service Centre csc@bsigroup.com ACE/65 FprEN 4526 Aerospace series. Metallic materials. Test methods. Sharp edge-notch tensile testing for sheet and strip The above mentioned document has been issued at CEN Formal Vote stage. Copies of the draft are available on request from the contact point (below). Contact: Committee Service Centre csc@bsigroup.com ACE/61/-/6 To order visit CEN EUROPEAN STANDARDS EUROPEAN RATIFIED TEXTS The documents listed below have recently been issued by CEN but have not yet been published as BS ENs. BSI has an obligation to adopt all ENs and to withdraw any conflicting British Standards (BSs) or parts of BSs. The following will be implemented as BS ENs or as amendments to BS ENs shortly. Notification of their implementation will be given in the BS EN Publications section of the relevant edition of Update Standards. EN 81-21:2009+A1:2012 Safety rules for the construction and installation of lifts. Lifts for the transport of persons and goods. New passenger and goods passenger lifts in existing buildings MHE/4 EN 161:2011+A2:2012 Automatic shut-off valves for gas burners and gas appliances GSE/22 EN 207: Personal eye-protection equipment. Filters and eye-protectors against laser radiation (laser eyeprotectors) CORRIGENDUM 1:December 2011 to EN 207:2009 PH/2 EN 710: Safety requirements for foundry moulding and coremaking machinery and plant associated equipment CORRIGENDUM 1:August 2012 to EN 710:1997+A1:2010 MCE/3/10 EN 892:2012 Mountaineering equipment. Dynamic mountaineering ropes. Safety requirements and test methods SW/136/5 EN :2012 Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines. Tissue making machines MCE/3/9 EN :2012 Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines. Roll handling systems MCE/3/9 EN : Road restraint systems. Product requirements and evaluation of conformity for vehicle restraint systems CORRIGENDUM 1:August 2012 to EN :2007+A2:2012 B/509/1 EN :2012 Tests for chemical properties of aggregates. Sorting test to determine metal content of Municipal Incinerator Bottom Ash (MIBA) Aggregates B/502/6 EN 3464:2012 Aerospace series. Titanium alloy Ti-6Al-4V. Annealed. Plate. 6 mm < a 100 mm ACE/61/-/49 EN :2012 Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Bending test ACE/6 EN 12001:2012 Conveying, spraying and placing machines for concrete and mortar. Safety requirements B/513/-/8 EN 12842:2012 Ductile iron fittings for PVC-U or PE piping systems. Requirements and test methods PSE/10 EN :2012 Spectator facilities. General characteristics for spectator viewing area B/552 EN 13752:2012 Chemicals used for treatment of water intended for human consumption. Manganese dioxide CII/59 EN 14214:2012 Liquid petroleum products. Fatty acid methyl esters (FAME) for use in diesel engines and heating applications. Requirements and test methods PTI/2 EN 14626:2012 Ambient air. Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy EH/2/3 EN :2006+A1:2012 Children s high chairs. Safety requirements CW/1/5 EN :2006+A1:2012 Children s high chairs. Test methods CW/1/5 EN 15875: Characterization of waste. Static test for determination of acid potential and neutralisation potential of sulfidic waste CORRIGENDUM 1:August 2012 to EN 15785:2011 B/508/3 EN 15933:2012 Sludge, treated biowaste and soil. Determination of ph H/-/4 46 Prices may be subject to change. Update Standards October 2012

47 EN 15934:2012 Sludge, treated biowaste, soil and waste. Calculation of dry matter fraction after determination of dry residue or water content H/-/4 EN 15935:2012 Sludge, treated biowaste, soil and waste. Determination of loss on ignition H/-/4 EN 15936:2012 Sludge, treated biowaste, soil and waste. Determination of total organic carbon (TOC) by dry combustion H/-/4 EN 16166:2012 Sludge, treated biowaste and soil. Determination of adsorbable organically bound halogens (AOX) H/-/4 EN 16167:2012 Sludge, treated biowaste and soil. Determination of polychlorinated biphenyls (PCB) by gas chromatography with mass selective detection (GC-MS) and gas chromatography with electron-capture detection (GC-ECD) H/-/4 EN 16168:2012 Sludge, treated biowaste and soil. Determination of total nitrogen using dry combustion method H/-/4 EN 16169:2012 Sludge, treated biowaste and soil. Determination of Kjeldahl nitrogen H/-/4 EN 16173:2012 Sludge, treated biowaste and soil. Digestion of nitric acid soluble fractions of elements H/-/4 EN 16174:2012 Sludge, treated biowaste and soil. Digestion of aqua regia soluble fractions of elements H/-/4 EN 16179:2012 Sludge, treated biowaste and soil. Guidance for sample pretreatment H/-/4 EN :2012 Sustainability criteria for the production of biofuels and bioliquids for energy applications. Principles, criteria, indicators and verifiers. Terminology PTI/20 EN :2012 Sustainability criteria for the production of biofuels and bioliquids for energy applications. Principles, criteria, indicators and verifiers. Biodiversity and environmental aspects related to nature protection purposes PTI/20 EN :2012 Pyrotechnic articles. Fireworks, category 4. Terminology CII/47 EN :2012 Pyrotechnic articles. Fireworks, category 4. Minimum labelling requirements and instructions for use CII/47 CEN WORKSHOP AGREEMENTS CWA 16504:2012 Simplified multilateral EDI. Secure electronic data interchange in non-hierarchical networks members, non-members CEN REPORTS CEN/TR 16324:2012 Technical report of the interlaboratory study for the determination of Besatz in common wheat, rye and durum wheat AW/4 CEN/TR 16388:2012 Gas-specific environmental document. Guideline for incorporating within standards to minimize the environmental impact of gas infrastructure across the whole life cycle GSE/33 CEN/TR 16389:2012 Automotive fuels. Paraffinic diesel fuel and blends. Background to the parameters required and their respective limits and determination PTI/2 CEN TECHNICAL SPECIFICATIONS CEN/TS :2012 Plastics piping systems for non-pressure underground drainage and sewerage. Polyethylene (PE). Guidance for the assessment of conformity PRI/88/1 CEN/TS :2012 Foodstuffs. Detection of food allergens by immunological methods. Quantitative determination of hazelnut with an enzyme immunoassay using polyclonal antibodies and Lowry protein detection AW/275 CENELEC PUBLICATIONS EUROPEAN RATIFIED TEXTS The documents listed below have recently been issued by CENELEC but have not yet been published as BS ENs. BSI has an obligation to adopt all ENs and to withdraw any conflicting British Standards (BSs) or parts of BSs. The following will be implemented as BS ENs or as amendments to BS ENs shortly. Notification of their implementation will be given in the BS EN Publications section of the relevant edition of Update Standards. EN 50177: Stationary electrostatic application equipment for ignitable coating powders. Safety requirements AMENDMENT 1:August 2012 to EN 50177:2009 EXL/31/-/1 EN 50239: Railway applications. Radio remote control system of traction vehicle for freight traffic CORRIGENDUM 1:August 2012 to EN 50239:2009 GEL/9 EN 50388: Railway applications. Power supply and rolling stock. Technical criteria for the coordination between power supply (substation) and rolling stock to achieve interoperability CORRIGENDUM 1:August 2012 to EN 50388:2012 GEL/9/2 EN :2012 (IEC :2012) Rotating electrical machines. Functional evaluation of insulation systems. Test procedures for form-wound windings. Thermal evaluation and classification of insulation systems used in rotating machines PEL/2 EN :2012 (IEC :2011) Explosive atmospheres. Equipment. General requirements EXL/31 EN :1999 (IEC :1999/A2:2012) Plugs, socket-outlets and couplers for industrial purposes. General requirements AMENDMENT 2:August 2012 to EN :1999 PEL/23/4 Update Standards October 2012 Prices may be subject to change. 47

48 CENELEC Publications continued... EN :2003 Household and similar electrical appliances. Safety. Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances AMENDMENT 12:August 2012 to EN :2003 CPL/61/7 EN : Household and similar electrical appliances. Safety. Particular requirements for deep fat fryers, frying pans and similar appliances AMENDMENT 11:August 2012 to EN :2010 CPL/61/7 EN : Household and similar electrical appliances. Safety. Particular requirements for air-cleaning appliances AMENDMENT 11:August 2012 to EN :2003 CPL/61/1 EN :2012 (IEC :2012) Household and similar electrical appliances. Safety. Particular requirements for floor treatment machines for commercial use CPL/61/10 EN :2012 (IEC :2012) Household and similar electrical appliances. Safety. Particular requirements for spray extraction machines, for commercial use CPL/61/10 EN :2012 (IEC :2012) Household and similar electrical appliances. Safety. Particular requirements for wet and dry vacuum cleaners, including power brush for commercial use CPL/61/10 Please do not send confirmation of orders placed by telephone as it can lead to duplication EN :2012 (IEC :2012) Household and similar electrical appliances. Safety. Particular requirements for floor treatment machines with or without traction drive, for commercial use CPL/61/10 EN :2012 (IEC :2012) Household and similar electrical appliances. Safety. Particular requirements for high pressure cleaners and steam cleaners CPL/61/10 EN :2012 (IEC :2012) Coupling capacitors and capacitor dividers. General rules PEL/33 EN 60440:2012 (IEC 60440:2012) Method of measurement of non-linearity in resistors EPL/40X EN :2012 (IEC :2012) Cable networks for television signals, sound signals and interactive services. Methods of measurement of non-linearity for full digital channel load with DVB-C signals EPL/100/4 EN :2012 (IEC :2012) Cable networks for television signals, sound signals and interactive services. Brandwith expansion for broadcast signal over FTTH system EPL/100/4 EN :2012 (IEC :2012) Optical fibre cables. Generic specification. Basic optical cable test procedures. Environmental test methods GEL/86/1 EN 60900:2012 (IEC 60900:2012) Live working. Hand tools for use up to 1000 V a.c. and 1500 V d.c. PEL/78 EN 61362:2012 (IEC 61362:2012) Guide to specification of hydraulic turbine governing systems MCE/15 EN :2012 (IEC :2012) Low-voltage switchgear and controlgear assemblies. Busbar trunking systems (busways) PEL/17/3 EN :2012 (IEC :2012) Liquid crystal display devices. Measuring methods for liquid crystal display modules. Transmissive type EPL/47 EN :2012 (IEC :2012) Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces. Interface standard for LC connectors with protective housings related to IEC GEL/86/2 EN :2012 (IEC :2012) Plasma display panels. Measuring methods. Acoustic noise EPL/47 EN :2012 (IEC :2012) Passive RF and microwave devices, intermodulation level measurement. General requirements and measuring methods EPL/46 EN : (IEC :2010/A1:2012) Industrial communication networks. High availability automation networks. General concepts and calculation methods AMENDMENT 1:August 2012 to EN :2010 AMT/7 CENELEC REPORTS CLC/TR :2012 Railway applications. Rolling stock. Intercommunication between vehicles and train/wayside. Technical contents of standardization work in the field of intercommunication GEL/9/2 IEC PUBLICATIONS It is BSI policy to supply the UK version of all adopted standards, which are published as British standards, unless otherwise requested. The following IEC publications are available from BSI Customer Services (see How to order on page 2) IEC Q01:2012 IEC Quality Assessment System for Electronic Components (IECQ System). Basic rules Free to download, from IEC website: bed4.0%7den.pdf 48 Prices may be subject to change. Update Standards October 2012

49 Introducing BS ISO The international standard for business continuity management At last, the wait is over. You will be happy to learn that the much anticipated international requirements standard for business continuity management has now been published. BS ISO identifies the fundamentals of business continuity management (BCM) and provides a basis for understanding, developing and implementing BCM within your organization. It gives you the confidence you need to assure key stakeholders that your business is fully prepared and can meet internal, regulatory and customer requirements. The CMI annual survey found that 81% of managers whose organizations activated their business continuity arrangements in the last 12 months said they had effectively reduced disruption. In summary - business continuity works. Prepare yourself against the worst BS ISO specifies the requirements to: Identify crucial risk factors already affecting your organization Understand your organization s needs and obligations Establish, implement and maintain your BCMS Measure your organization s overall capability to manage disruptive incidents Guarantee conformity with stated business continuity policy If disruption is not an option for your business, implementing BS ISO is the first step towards a best practice approach. The standard has been specifically designed to ensure continued business functionality during the most unexpected circumstances. For more information visit: shop.bsigroup.com/iso22301us1210 To contact us visit shop.bsigroup.com/iso22301us1210 or contact Customer Services quoting marketing reference code BSOLM-US1210 T F orders@bsigroup.com shop.bsigroup.com/iso22301us1210 Standards and publications may also be ordered via the BSI shop at shop.bsigroup.com *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0) BSI British Standards Institution 2012

50 IEC Publications continued... IEC Q03-1:2012 (Edition 2) Rules of procedure. General requirements for all IECQ schemes Free to download, from IEC website: IEC Q03-2:2012 (Edition 2) Rules of procedure. IECQ Approved Process Scheme Free to download, from IEC website: IEC Q03-3:2012 (Edition 2) Rules of procedure. IECQ approved component products, related materials & assemblies scheme Free to download, from IEC website: IEC Q03-4:2012 (Edition 2) Rules of procedure. IECQ ECMP Scheme. Avionics Assessment Program Requirements Free to download, from IEC website: IEC Q03-5:2012 (Edition 2) Rules of procedure. IECQ HSPM Scheme. Hazardous Substance Process Management Requirements Free to download, from IEC website: IEC Q03-6:2012 (Edition 2) Rules of procedure. IECQ ITL Scheme. Independent Testing Laboratory Assessment Program Requirements Free to download, from IEC website: IEC :2012 Connectors for electronic equipment. Tests and measurements. Test schedule for engaging and separating connectors under electrical load. Test 99a: Connectors used in twisted pair communication cabling with remote power members, non-members EPL/48 IEC : Medical electrical equipment. Particular requirements for the basic safety and essential performance of X-ray equipment for computed tomography AMENDMENT 1:August 2012 to IEC : members, non-members CH/62/2 IEC :2012 Fire hazard testing. Test flames. 500 W flames. Apparatus and confirmational test methods members, non-members GEL/89 IEC :2012 Optical fibre cables. Generic specification. Basic optical cable test procedures. Cable element test methods members, non-members GEL/86/1 IEC : Information technology equipment. Safety. General requirements CORRIGENDUM 1:August 2012 to IEC :2005/A1:2009 EPL/108 IEC : Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs). General rules CORRIGENDUM 1:August 2012 to IEC :2010 PEL/23/1 IEC :2012 (Edition 2) Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Crush resistance members, non-members GEL/86/2 IEC :2012 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Fibre optic transceiver receptacle endface visual and automated inspection members, non-members GEL/86/2 IEC : Lamp controlgear. Particular requirements for ballasts for fluorescent lamps CORRIGENDUM 1:August 2012 to IEC :2000/A1:2006 CPL/34/3 IEC 61394: Overhead lines. Requirements for greases for aluminium, aluminium alloy and steel bare conductors CORRIGENDUM 1:August 2012 to IEC 61394:2011 GEL/7 IEC :2012 Mechanical structures for electronic equipment. Tests for IEC and IEC series. Combination of performance levels for modular cabinets members, non-members EPL/48 IEC :2012 Fibre optic interconnecting devices and passive components. Performance standard. Nonconnectorized single-mode fibre optic pigtailed isolators for category C. Controlled environments members, non-members GEL/86/2 IEC :2012 Railway applications. Rolling stock equipment. Capacitors for power electronics. Aluminium electrolytic capacitors with non-solid electrolyte members, non-members GEL/9/2 IEC :2012 Railway applications. Rolling stock equipment. Capacitors for power electronics. Electric double-layer capacitors members, non-members GEL/9/2 IEC :2012 Organic light emitting diode (OLED) displays. Measuring methods of image quality members, non-members EPL/47 IEC/TS :2012 Marine energy. Wave, tidal and other water current converters. Electricity producing wave energy converters. Power performance assessment members, non-members PEL/114 IEC 62628:2012 Guidance on software aspects of dependability members, non-members DS/1 IEC/TS 62654:2012 Network-based energy consumption measurement. Energy saving system. Conceptual model members, non-members EPL/100 IEC :2012 Test methods for quantitative determination of corrosive sulfur compounds in unused and used insulating liquids. Test method for quantitative determination of dibenzyldisulfide (DBDS) members, non-members GEL/10 IEC :2012 Preparation of instructions for use. Structuring, content and presentation. General principles and detailed requirements members, non-members GEL/3 CISPR/TR 30-1:2012 Test method on electromagnetic emissions. Electronic control gear for single- and doublecapped fluorescent lamps members, non-members GEL/210/11 50 Prices may be subject to change. Update Standards October 2012

51 3rd annual Carbon & Environmental Footprinting Conference Gain competitive advantage through product footprinting 22 November 2012, London This engaging and interactive event aims to further senior industry attendees a understanding of how carbon footprinting infiltrates every aspect of product delivery. Thought leaders, policy makers, climate change practitioners from wide range of industry sectors will gather to share their experiences of product footprinting and PAS Obtain valuable updates on how to benefit from sound financial investments, increase in transparency at every stage of the product life cycle, gaining competitive advantage and much more. Delve into conversations on forward thinking initiatives including, environmental footprinting and hot-spot analysis. Exchange valuable advice on good practice through interactive networking, presentations and an array of case studies from UK as well as lesson learnt from international luminaries. Few reasons why you shouldn t miss this event: Hear practical case studies on PAS 2050, PAS 2060 Explore the opportunities and overcome the challenges following best practice case studies from Industry leaders in Product Carbon Footprinting such as Coca-Cola, Boots and Carbon Trust Update from the European Commission about the latest projects and initiatives Stay ahead of the competition and learn what is on the horizon of environmental footprinting Learn about new ISO Network with experts and peers and much, much more. Key note speakers include Dr Michele Galatola, Product Team Leader, DG Environment, European Commission Jo Frances, Director, Corporate Responsibility & Sustainability, Coca-Cola Enterprises Mark Barthel, Head of Product Sustainability Forum, WRAP Read the full list of speakers and see how Carbon & Environmental Footprinting Conference can help your business. Read more and book your place now shop.bsigroup.com/footprinting Must attend conference To contact us visit shop.bsigroup.com/iso22301us1210 or contact Customer Services quoting marketing reference code BSOLM-US1210 T F orders@bsigroup.com shop.bsigroup.com/iso22301us1210 Standards and publications may also be ordered via the BSI shop at shop.bsigroup.com *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0) BSI British Standards Institution 2012

52 IEC Publications continued... CISPR/TR 30-2:2012 Test method on electromagnetic emissions. Electronic control gear for discharge lamps excluding fluorescent lamps members, non-members GEL/210/11 ISO PUBLICATIONS It is BSI policy to supply the UK version of all adopted standards, which are published as British standards, unless otherwise requested. The following ISO publications are available from BSI Customer Services (see How to order on page 2) ISO/IEC 1001:2012 Information technology. File structure and labelling of magnetic tapes for information interchange members, non-members ICT/-/1 Will not be implemented as a British Standard ISO :2012 (Edition 2) Fluid power systems and components. Graphical symbols and circuit diagrams. Circuit diagrams members, non-members MCE/18 ISO :2012 (Edition 5) Rubber, vulcanized or thermoplastic. Resistance to ozone cracking. Static and dynamic strain testing members, non-members PRI/22 ISO :2012 Rubber- or plastics-coated fabrics. Determination of bursting strength. Steel-ball method members, non-members TCI/69 ISO :2012 Rubber- or plastics-coated fabrics. Determination of bursting strength. Hydraulic method members, non-members TCI/69 ISO 3434:2012 (Edition 3) Ships and marine technology. Heated glass panes for ships rectangular windows members, non-members SME/32/-/8 ISO 3972: Sensory analysis. Methodology. Method of investigating sensitivity of taste CORRIGENDUM 1:August 2012 to ISO 3972:2011 AW/12 ISO :2012 (Edition 4) Truck and bus tyres and rims (metric series). Rims members, non-members AUE/4 ISO 5755:2012 (Edition 3) Sintered metal materials. Specifications members, non-members ISE/65 ISO : Horological vocabulary. Technical and commercial definitions AMENDMENT 1:August 2012 to ISO : members, non-members STI/53 ISO 6534: Forestry machinery. Portable chain-saw handguards. Mechanical strength AMENDMENT 1:August 2012 to ISO 6534: members, non-members AGE/29 ISO 7043:2012 (Edition 3) Prevailing torque type hexagon nuts with flange (with non-metallic insert), style 2. Product grades A and B members, non-members FME/9/1 Will not be implemented as a British Standard ISO 7044:2012 (Edition 3) Prevailing torque type all-metal hexagon nuts with flange, style 2. Product grades A and B members, non-members FME/9/1 Will not be implemented as a British Standard ISO 7225: Gas cylinders. Precautionary labels AMENDMENT 1:August 2012 to ISO 7225: members, non-members PVE/3/7 ISO 7866:2012 (Edition 2) Gas cylinders. Refillable seamless aluminium alloy gas cylinders. Design, construction and testing members, non-members PVE/3/3 ISO 7914: Forestry machinery. Portable chain-saws. Minimum handle clearance and sizes AMENDMENT 1:August 2012 to ISO 7914: members, non-members AGE/29 ISO :2012 Paints and varnishes. Drying tests. Test using a mechanical recorder members, non-members STI/10 ISO :2012 Paints and varnishes. Drying tests. Modified Bandow-Wolff test members, non-members STI/10 ISO 9772:2012 (Edition 3) Cellular plastics. Determination of horizontal burning characteristics of small specimens subjected to a small flame members, non-members PRI/26 ISO 10018:2012 Quality management. Guidelines on people involvement and competence members, non-members QS/1 ISO 10210:2012 Plastics. Methods for the preparation of samples for biodegradation testing of plastic materials members, non-members PRI/21 Will not be implemented as a British Standard ISO :2012 Terminological entries in standards. Adoption of standardized terminological entries members, non-members TS/1 ISO 10772:2012 Geotextiles. Test method for the determination of the filtration behaviour of geotextiles under turbulent water flow conditions members, non-members B/ Prices may be subject to change. Update Standards October 2012

53 ISO 10776:2012 Geotextiles and geotextile-related products. Determination of water permeability characteristics normal to the plane, under load members, non-members B/553 ISO :2012 (Edition 2) Paper and board. Testing of cores. Determination of natural frequency and flexural modulus by experimental modal analysis members, non-members PAI/11 ISO 11638:2012 Resilient floor coverings. Heterogeneous poly(vinyl chloride) flooring on foam. Specification members, non-members PRI/3/60 Will not be implemented as a British Standard ISO 11706:2012 Carbonaceous materials for the production of aluminium. Prebaked anodes. Determination of the fracture energy members, non-members CII/24 ISO/TR 11811:2012 Nanotechnologies. Guidance on methods for nano- and microtribology measurements members, non-members NTI/1 ISO 12107:2012 (Edition 2) Metallic materials. Fatigue testing. Statistical planning and analysis of data members, non-members ISE/101/6 ISO 12125:2012 (Edition 2) Prevailing torque type hexagon nuts with flange (with non-metallic insert) with metric fine pitch thread, style 2. Product grades A and B members, non-members FME/9/1 Will not be implemented as a British Standard ISO 12126:2012 (Edition 2) Prevailing torque type all-metal hexagon nuts with flange with metric fine pitch thread, style 2. Product grades A and B members, non-members FME/9/1 Will not be implemented as a British Standard ISO :2012 Plastics. Post-consumer poly(ethylene terephthalate) (PET) bottle recyclates. Designation system and basis for specifications members, non-members PRI/82 ISO :2012 Plastics. Post-consumer poly(ethylene terephthalate) (PET) bottle recyclates. Preparation of test specimens and determination of properties members, non-members PRI/82 ISO/TS 12911:2012 Framework for building information modelling (BIM) guidance members, non-members B/555 ISO 13029:2012 Textiles. Determination of drying rate in dynamic state by the modified sweatingguarded hotplate members, non-members TCI/24 Will not be implemented as a British Standard ISO 13102:2012 Geometrical product specifications (GPS). Dimensional measuring equipment. Electronic digital-indicator gauge. Design and metrological characteristics members, non-members TDW/4 ISO 13153:2012 Framework of the design process for energysaving single-family residential and small commercial buildings members, non-members RHE/2 ISO :2012 Fine ceramics (advanced ceramics, advanced technical ceramics). Microstructural characterization. Determination of grain size and size distribution members, non-members RPI/13 ISO :2012 Fine ceramics (advanced ceramics, advanced technical ceramics). Microstructural characterization. Determination of phase volume fraction by evaluation of micrographs members, non-members RPI/13 ISO/TR 13519:2012 Guidance on the development and use of ISO statistical publications supported by software members, non-members SS/4 ISO :2012 Textiles. Determination of antifungal activity of textile products. Luminescence method members, non-members TCI/80 Will not be implemented as a British Standard ISO/TS 13896:2012 Soil quality. Determination of linear alkylbenzene sulfonate (LAS). Method by HPLC with fluorescence detection (LC-FLD) and mass selective detection (LC-MSD) members, non-members EH/4 ISO/TS 13907:2012 Soil quality. Determination of nonylphenols (NP) and nonylphenol-mono- and diethoxylates. Method by gas chromatography with mass selective detection (GC-MS) members, non-members EH/4 ISO 13944:2012 (Edition 2) Lubricated metal-powder mixes. Determination of lubricant content. Soxhlet extraction method members, non-members ISE/65 Will not be implemented as a British Standard ISO 13971:2012 Refrigeration systems and heat pumps. Flexible pipe elements, vibration isolators, expansion joints and non-metallic tubes. Requirements and classification members, non-members RHE/18 ISO/IEC : Information technology. Coding of audio-visual objects. Audio CORRIGENDUM 3:September 2012 to ISO/IEC :2009 IST/37 Will not be implemented as a British Standard ISO/TR :2012 Health informatics. Capacity-based ehealth architecture roadmap. Overview of national ehealth initiatives members, non-members IST/35 Update Standards October 2012 Prices may be subject to change. 53

54 ISO Publications continued... ISO :2012 (Edition 2) Implants for surgery. Active implantable medical devices. Cardiac pacemakers members, non-members CH/150/2 Will not be implemented as a British Standard ISO 14721:2012 (Edition 2) Space data and information transfer systems. Open archival information system (OAIS). Reference model members, non-members ACE/68/-/7 ISO 16204:2012 Durability. Service life design of concrete structures members, non-members B/525/2 Will not be implemented as a British Standard ISO/TS 16697:2012 Space systems. Safety and compatibility of materials. Method to determine the flammability thresholds of materials members, non-members ACE/68 ISO 17261:2012 Intelligent transport systems. Automatic vehicle and equipment identification. Intermodal goods transport architecture and terminology members, non-members EPL/278 ISO 17262:2012 Intelligent transport systems. Automatic vehicle and equipment identification. Numbering and data structures members, non-members EPL/278 ISO/IEC 17982:2012 Information technology. Telecommunications and information exchange between systems. Close Capacitive Coupling Communication Physical Layer (CCCC PHY) members, non-members ICT/-/1 Will not be implemented as a British Standard ISO/IEC 17998:2012 Information technology. SOA Governance Framework members, non-members ICT/-/1 ISO/IEC :2012 (Edition 2) Information technology. Radio frequency identification device performance test methods. Test methods for tag performance members, non-members IST/34 ISO/IEC :2012 Information technology. Radio frequency identification device conformance test methods. Test methods for air interface communications at 860 MHz to 960 MHz members, non-members IST/34 ISO :2012 Industrial automation systems and integration. Diagnostics, capability assessment and maintenance applications integration. Descriptions and definitions of application domain matrix elements members, non-members AMT/5 ISO 19840:2012 (Edition 2) Paints and varnishes. Corrosion protection of steel structures by protective paint systems. Measurement of, and acceptance criteria for, the thickness of dry films on rough surfaces members, non-members STI/27 Will not be implemented as a British Standard ISO/IEC :2012 Information technology. Service management. Guidance on scope definition and applicability of ISO/IEC members, non-members IST/15 ISO :2012 (Edition 2) Safety and control devices for gas burners and gas-burning appliances. Particular requirements. Automatic and semi-automatic valves members, non-members GSE/22 Will not be implemented as a British Standard ISO 23907:2012 Sharps injury protection. Requirements and test methods. Sharps containers members, non-members CH/84 ISO/IEC TS 24790:2012 Information technology. Office equipment. Measurement of image quality attributes for hardcopy output. Monochrome text and graphic images members, non-members IST/3 ISO/IEC TR :2012 (Edition 2) Information technology. JPSearch. System framework and components members, non-members IST/37 Will not be implemented as a British Standard ISO/IEC : Information technology. JPSearch. Query format CORRIGENDUM 1:August 2012 to ISO/IEC :2010 IST/37 ISO 29661:2012 Reference radiation fields for radiation protection. Definitions and fundamental concepts members, non-members NCE/2 Will not be implemented as a British Standard ISO/PAS PUBLICATIONS ISO/PAS :2012 Ships and marine technology. Electronic port clearance (EPC). Message structures. Implementation of a maritime single window system members, non-members SME/32 Help Us to Help You! Always quote your Customer Number Don t know your number? Contact Customer Services who will be happy to check it for you 54 Prices may be subject to change. Update Standards October 2012

55 NEW BOOK Standard specifications for transportation materials and methods of sampling and testing If you design or construct highways, this new book contains everything you need The latest Edition of the Materials Book contains 394 materials specifications and test methods commonly used in the construction of highway facilities. The specifications have been developed and maintained by US transportation departments through participation in AASHTO s Subcommittee on Materials. The book is organized in two volumes, Materials and Testing, and each volume has been separated into two books. Also included is the single-volume AASHTO Provisional Standards 2012 Edition. Book: 687* 773* 1145* *Plus shipping and handling. BSI member receive a 10% discount. To get your copy: Call Distributor.Sales@bsigroup.com BSI Knowledge Centre your standards resource BSI Knowledge Centre provides the following services to BSI members: information on the status, availability, scope and coverage of standards detailed database searches across current and withdrawn standards response within 1 working day Contact us to arrange a visit to view and purchase in PDF and hardcopy bsigroup.com/withdrawnus1210 For more information contact the BSI Knowledge Centre: Tel Fax knowledgecentre@bsigroup.com bsigroup.com/knowledgecentre

56 NEW European standard for general audit BS EN Energy audit Can you afford not to have an energy audit? The first step towards reducing energy consumption and increasing energy efficiency is to carry out an energy audit. BS EN Energy Audits helps to identify energy saving opportunities within your organization allowing you to deal with waste and inefficiencies and improving your returns on investment. This standard defines what constitutes a good energy audit so that you can feel confident that whatever the size or type of your organization, you are able to control energy use, reduce energy costs and meet your environmental responsibilities. And if you re a consultant, you can offer the best energy audit advice, standardised to meet the European Energy Services Directive 2006/32/EC. Use the standard alone or in conjunction with BS EN ISO Energy Management Systems to enjoy the benefits of good energy management practice. shop.bsigroup.com/bsen16247 Why not take a Quick look at some BS EN ISO Energy Management case studies: shop.bsigroup.com/50001casestudies To contact us visit shop.bsigroup.com/bsen16247 or contact Customer Services quoting marketing reference code US1210 T F orders@bsigroup.com shop.bsigroup.com/bsen16247 Standards and publications may also be ordered via the BSI shop at shop.bsigroup.com *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0) BSI British Standards Institution 2012