STANDARDS April UPDATE. New standard. Online version

Transcription

1 UPDATE STANDARDS April 2012 Online version usonline1204 Contents New standard BS 8572:2011 Procurement of facility-related services. Guide * 4Quick Reference Guide 8 New and revised British Standards 8BS EN publications 14 British Standard implementations 15 Published Documents 15 Drafts for Development 15 Publicly Available Specifications 15 Specialist books from BSI 15 Corrigenda to British Standards 16 Updated British Standards 17 Special Announcements 17 British Standards proposed for confirmation and confirmed 17 British Standards proposed for withdrawal and withdrawn 19 British Standards under review 23 New work started 30 Draft British Standards 36 Documents not issued as DPCs 36 CEN publications 38 CENELEC publications 40 IEC publications 44 ISO publications *See back cover for more information raising standards worldwide

2 Customer Services Your first point of contact 9 am to 5 pm BST Monday to Friday Call Customer Services now: Help us give you the best customer service How to order Telephone +44 (0) Website orders@bsigroup.com to place an order info@bsigroup.com to make an enquiry Fax +44 (0) Post BSI Customer Services 389 Chiswick High Road London W4 4AL **ATTENTION BSI MEMBERS** Standards and publications may also be ordered via the BSI shop at *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0) BSI British Standards Institution 2012

3 +44 (0) BSI Training To download BSI Training Catalogue please visit our website: Dates for your diary BSI Events in 2012 Infosecurity Europe April, Earls Court, London Infosecurity Europe is Europe s most comprehensive gathering of information security professionals, located at Earls Court. Showcasing the most diverse range of new innovative products and services. Also addressing today s strategic and technical issues in an unrivalled free-to-attend education programme. Register now and stay connected to your peers and network both face-to-face and online. Visit us on stand J63 Sustainabilitylive May, NEC Birmingham Sustainabilitylive! is the UK s leading sustainability event covering the water, energy, environmental, land and sustainable business markets. The place to network with like-minded professionals from across a range of different sectors; share experiences, source Information and find solutions for your business. Discover best practice solutions & strategies from industry leading professionals in the conference and seminar programme; providing you with the knowledge to stay ahead of the game. Visit us on stand P28 raising standards worldwide

4 British Standards Quick Reference Guide The following British Standards are listed or referred to in this issue of Update Standards with the exception of those in New Work Started. Quick reference guide Building and civil engineering BS DD CEN/TS BS EN BS EN BS EN BS EN BS EN BS EN BS EN , 18 BS EN BS EN ISO BS EN , 19 BS EN , 19 BS EN BS ISO BS ISO , 19 BS ISO Consumer products and services BS , 18 BS BS BS BS , 18 DD CEN/TS , 18 DD CEN ISO/TS BS EN ISO BS EN BS EN BS EN ISO BS EN ISO BS EN ISO BS EN BS EN BS EN , 18 BS EN BS EN BS EN BS EN ISO BS ISO BS ISO , 18 BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO , 15 DD ISO/TS , 18 PD CEN/TS PD ISO/TS Electrotechnical BS BS EN , 18 BS EN ISO , 18 BS EN ISO BS EN , 15 BS EN BS EN BS EN BS EN BS EN BS EN , 19 BS EN BS EN BS EN , 16, 18 BS EN BS EN BS EN BS EN BS EN BS EN , 18 BS EN BS EN BS EN , 19 BS EN BS EN , 19 BS EN BS EN BS EN BS EN BS EN BS IEC BS IEC , 19 DD IEC/PAS , 19 PD IEC/TR , 19 PD IEC/TR BS QC , 19 BS QC , 19 BS QC , 19 Engineering BS , 18 BS BS , 18 BS EN , 18 BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN , 19 BS EN BS EN BS EN BS EN BS EN ISO BS EN BS EN ISO , 18 BS EN ISO , 18 BS EN ISO , 18 BS EN ISO , 18 BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN , 18 BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN ISO BS EN ISO , 18 BS EN BS EN BS EN ISO BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN ISO BS EN DD ENV BS ISO BS ISO BS ISO , 18 BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO , 19 BS ISO BS IEC , 18 PD CEN/TR PD CEN ISO/TR PD ISO/TR PD ISO/TS , 19 BS 3A , 19 BS 4A , 19 BS 6SP BS 2SP BS 3TA , 19 Health and environment BS BS BS BS BS , 20 BS EN ISO BS EN BS EN BS EN BS EN BS EN ISO , 18 BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN , 18 BS EN BS EN ISO BS EN BS EN BS EN ISO BS EN ISO BS EN ISO BS EN ISO , 18 BS EN , 18 BS EN BS ISO BS ISO Prices may be subject to change. Update Standards April 2012

5 British Standards Quick Reference Guide continued... BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO Information systems BS BS EN ISO BS ISO/IEC BS ISO/IEC BS ISO/IEC BS ISO/IEC/IEEE , 19 BS ISO/IEC BS ISO/IEC BS ISO/IEC BS ISO BS ISO/IEC BS ISO/IEC BS ISO/IEC , 16, 23 BS ISO/IEC BS ISO/IEC BS ISO/IEC BS ISO/IEC BS ISO/IEC BS ISO/IEC BS ISO/IEC , 19 PD ISO/IEC TR Management systems BS BS EN ISO/IEC BS EN ISO BS ISO Materials and chemicals BS , 20 BS BS BS BS , 18 BS , 18 BS EN ISO BS EN ISO BS EN , 18 BS EN , 18 BS EN BS EN , 18 BS EN BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO , 15, 18 BS EN ISO , 15, 18 BS EN ISO , 18 BS EN ISO , 18 BS EN ISO , 15 BS EN ISO , 18 BS ISO BS ISO BS ISO BS ISO BS ISO , 18 BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO Alpha-numeric sequence of British Standards quoted in this issue BS BS , 20 BS BS BS , 18 BS BS BS BS BS , 18 BS BS BS BS BS BS BS BS , 18 BS , 20 BS , 18 BS , 18 BS , 18 BS BIP DD CEN/TS DD CEN/TS , 18 DD CEN ISO/TS BS EN ISO BS EN BS EN ISO BS EN BS EN BS EN ISO BS EN BS EN ISO BS EN BS EN , 18 BS EN , 18 BS EN BS EN , 18 BS EN BS EN ISO BS EN ISO BS EN ISO BS EN , 18 BS EN BS EN BS EN BS EN ISO BS EN BS EN BS EN BS EN ISO/IEC BS EN BS EN ISO BS EN ISO BS EN BS EN BS EN BS EN BS EN , 18 BS EN BS EN ISO BS EN BS EN BS EN BS EN ISO BS EN ISO BS EN BS EN ISO BS EN , 19 BS EN ISO BS EN BS EN ISO , 18 BS EN ISO BS EN ISO BS EN BS EN BS EN BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN BS EN ISO , 18 Update Standards April 2012 Prices may be subject to change. 5

6 Alpha-numeric Sequence of British Standards continued... BS EN ISO , 18 BS EN ISO , 18 BS EN ISO , 18 BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN , 18 BS EN BS EN BS EN ISO BS EN BS EN BS EN BS EN ISO BS EN ISO BS EN BS EN BS EN BS EN BS EN BS EN BS EN , 18 BS EN BS EN ISO , 18 BS EN , 18 BS EN ISO BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN , 15 BS EN BS EN ISO BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN ISO BS EN BS EN BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO , 18 BS EN BS EN BS EN ISO BS EN ISO BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN , 18 BS EN , 19 BS EN BS EN ISO BS EN , 19 BS EN BS EN BS EN BS EN BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO , 15, 18 BS EN ISO , 15, 18 BS EN ISO , 18 BS EN ISO , 18 BS EN ISO BS EN ISO , 18 BS EN ISO , 15 BS EN ISO , 18 BS EN BS EN BS EN BS EN BS EN BS EN , 19 BS EN BS EN BS EN , 16, 18 BS EN , 18 BS EN BS EN BS EN BS EN BS EN BS EN , 18 BS EN BS EN BS EN , 19 BS EN BS EN , 19 BS EN BS EN BS EN BS EN BS EN BS EN DD ENV BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO , 18 BS ISO BS ISO BS ISO BS ISO , 18 BS ISO BS ISO BS ISO BS ISO BS ISO , 18 BS ISO/IEC BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO/IEC BS ISO/IEC BS ISO/IEC/IEEE , 19 BS ISO BS ISO BS ISO/IEC BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO/IEC BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO/IEC BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO , 19 BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO/IEC BS ISO/IEC BS ISO/IEC , 16, 23 BS ISO/IEC BS ISO , 19 BS ISO BS ISO/IEC BS ISO BS ISO BS ISO/IEC BS ISO/IEC BS ISO/IEC BS ISO BS ISO , 15 BS ISO BS ISO/IEC BS ISO/IEC , 19 BS IEC BS IEC , 18 BS IEC , 19 DD ISO/TS , 18 DD IEC/PAS , 19 PD CEN/TR PD CEN/TS PD CEN ISO/TR PD ISO/TR PD ISO/TS , 19 PD ISO/TS PD ISO/IEC TR PD IEC/TR , 19 PD IEC/TR BS 4A , 19 BS 3A , 19 BS QC , 19 BS QC , 19 BS QC , 19 BS 6SP BS 2SP BS 3TA , 19 PAS PAS Prices may be subject to change. Update Standards April 2012

7 New BS Fire safety in the design, management and use of residential buildings. Code of practice Fully revised and updated, risk-based approach to fire safety in residential buildings. BS 9991:2011 gives recommendations and guidance on the design, management and use to achieve reasonable standards of fire safety for all people in and around: Dwellings (single-family dwelling houses, self-contained flats or maisonettes) Residential accommodation blocks (e.g. for students or hospital staff), with individual bedrooms and the provision of kitchen/sanitary facilities constructed within a fire compartment, accommodating not more than six persons Sheltered housing and extra care housing. The guidance provides measures to control or mitigate the effects of fire. The primary objective is to ensure that an adequate standard of life safety can be achieved in the event of a fire in the building. This can also have the effect of assisting the fire and rescue service and provide some property and environmental protection. There are references throughout BS 9991:2011 to occupant safety, fire-fighter safety and property protection, to draw attention to the different considerations these could raise. Fully revised and updated BS 9991:2011 is a full revision of BS :1990 Fire precautions in the design, construction and use of buildings. Code of practice for residential buildings. It has been revised to reflect advances in technology, equipment and best practice across the industry and now provides a level of flexibility that allows the fire protection measures and the risks to be assessed to enable reasonable practical solutions to be designed. BS 9991:2011 applies to the design of new buildings and to material alterations, extensions or change of use of an existing building. It also provides guidance on the ongoing management of fire safety in a building throughout the entire life cycle of the building, including guidance for designers to ensure that the overall design of a building assists and enhances the management of fire safety. To contact us visit or contact BSI Customer Services quoting marketing reference code BS9991-US1204 Tel +44 (0) Fax +44 (0) orders@bsigroup.com raising standards worldwide Standards and publications may also be ordered via the BSI shop at *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0) BSI British Standards Institution 2012

8 British Standards BRITISH STANDARDS The following British Standard publications are available from BSI Customer Services (see How to order on page 2). The publications listed below are new and revised British Standards that were made available last month. An existing BSI publication bearing a number identical to one announced below is automatically withdrawn unless stated otherwise. In all other cases of supersession, details are given and a corresponding entry appears in the British Standards withdrawn section. BRITISH STANDARD IMPLEMENTATIONS WILL BE SUPPLIED IN PREFERENCE TO EUROPEAN OR INTERNATIONAL STANDARDS, UNLESS OTHERWISE REQUESTED. Please order by the British Standard reference not the ISBN number. BS 2000 series standards are also available from: Library of the Energy Institute 61 New Cavendish Street London W1G 7AR Tel: Fax: lis@energyinst.org.uk For this series, member pricing is applicable to BSI and Energy Institute members. BS :2012 Acquisition and management of meteorological precipitation data from a gauge network. Code of practice for the design and manufacture of storage and automatic collecting raingauges Together with BS :2012, it supersedes BS :1999 and BS :2005, which are withdrawn ISBN CPI/113 BS :2012 Acquisition and management of meteorological precipitation data from a raingauge network. Guide for the estimation of areal rainfall supersedes BS :1996 which is withdrawn. Together with BS :2012, it supersedes BS :1996 and BS :1996, which are withdrawn ISBN CPI/113 BS 4A 116:2012 Steel pan head bolts (Unified threads), cadmium plated for aircraft supersedes BS 3A 116:1962 ISBN ACE/12 BS EN PUBLICATIONS The following are British Standard implementations of the English language versions of European Standards (ENs). BSI has an obligation to publish all ENs and to withdraw any conflicting British Standards. This has led to a series of standards, BS ENs, using the EN number. Note: The date referenced in the identifier is the date of the European standard. BS EN 397:2012 Industrial safety helmets supersedes BS EN 397:1995 ISBN members, non-members PH/6/1 BS EN 764-2:2012 Pressure equipment. Quantities, symbols and units supersedes BS EN 764-2:2002 ISBN PVE/1 BS EN 806-5:2012 Specifications for installations inside buildings conveying water for human consumption. Operation and maintenance supersedes BS 6700:2006+A1:2009 which remains current ISBN members, non-members B/504/2 BS EN 812:2012 Industrial bump caps supersedes BS EN 812:1998 ISBN PH/6/1 BS EN 933-1:2012 Tests for geometrical properties of aggregates. Determination of particle size distribution. Sieving method supersedes BS EN 933-1:1997 ISBN B/502/6 BS EN 933-3:2012 Tests for geometrical properties of aggregates. Determination of particle shape. Flakiness index supersedes BS EN 933-3:1997 ISBN B/502/6 BS EN 933-8:2012 Tests for geometrical properties of aggregates. Assessment of fines. Sand equivalent test supersedes BS EN 933-8:1999 ISBN B/502/6 BS EN 966:2012 Helmets for airborne sports supersedes BS EN 966:1996 ISBN members, non-members PH/6/6 BS EN 994:2012 Textile floor coverings. Determination of the side length, squareness and straightness of tiles supersedes BS EN 994:1996 ISBN PRI/3/60 BS EN 1078:2012 Helmets for pedal cyclists and for users of skateboards and roller skates supersedes BS EN 1078:1997 ISBN PH/6/4 BS EN 1423:2012 Road marking materials. Drop on materials. Glass beads, antiskid aggregates and mixtures of the two supersedes BS EN 1423:1998 ISBN members, non-members B/509/2 BS EN :2012 Chimneys. Clay/ceramic flue liners. Flue liners operating under dry conditions. Requirements and test methods Together with BS EN :2012, it supersedes BS EN 1457:1999 ISBN members, non-members B/506/3 BS EN :2012 Chimneys. Clay/ceramic flue liners. Flue liners operating under wet conditions. Requirements and test methods Together with BS EN :2012, it supersedes BS EN 1457:1999 ISBN members, non-members B/506/3 BS EN ISO :2012 Plastics. Polystyrene (PS) moulding and extrusion materials. Designation system and basis for specifications supersedes BS EN ISO :2000 ISBN PRI/82 BS EN 2252:2012 Aerospace series. Steel FE-PL1505 (15CrMoV6) MPa Rm 1250 MPa. Forgings. De 100 mm ISBN ACE/61/-/15 BS EN ISO 2419:2012 Leather. Physical and mechanical tests. Sample preparation and conditioning supersedes BS EN ISO 2419:2006 ISBN TCI/69 BS EN 3120:2012 Aerospace series. Titanium alloy TI-P Cold worked and stress relieved. Seamless tube for pressure systems. 4 mm D 51 mm. 690 MPa Rm 1030 MPa ISBN ACE/61/-/49 8 Prices may be subject to change. Update Standards April 2012

9 New standard BS 6187:2011 Code of practice for full and partial demolition Now includes recommendations for partial demolition and structural refurbishment We ve just published a new standard code of practice for demolition. Demolition is often defined as the complete removal of a structure or building. But it can also mean deconstructing a single element of a structure such as a porch or part of a building such as a wall, for example. This standard now covers both. So whether your demolition activities are large or small, include undertaking partial or total demolition, the updated version of BS 6187 is an invaluable reference. Fully revised and updated to include changes in best practice across the industry, driven in particular by health and safety requirements BS 6187 has been revised to reflect advances in technology and equipment in the demolition industry, and to give recommendations on the following principal areas: risk assessments, decommissioning procedures, environmental provisions and façade retention and recycling and application. The standard has been significantly updated to reflect current and developing good practices. By being less prescriptive, this edition also allows for innovative techniques and methods to be employed. Naturally, the standard gives valuable guidelines on health and safety, and how your work could affect the protection of the environment. If you are carrying out demolition activities you must possess the necessary levels of competence. Clients or procurers of demolition works need to ensure that all contractors, designers and other team members that they propose to engage or appoint are competent to comply with the health and safety requirements necessary to undertake demolition activities. Guidance is given on the training and competence required for the activities covered by this standard. Also included: including those forming part of structural refurbishment of temporary structural support, where necessary of the demolition processes Order your copy of BS 6187 now to stay fully up to date with the latest thinking and guidance. To contact us visit or contact BSI Customer Services quoting marketing reference code BS6187-US1204 Tel +44 (0) Fax +44 (0) orders@bsigroup.com raising standards worldwide Standards and publications may also be ordered via the BSI shop at *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0) BSI British Standards Institution 2012

10 BS EN Publications continued... BS EN 3312:2012 Aerospace series. Titanium alloy Ti-6Al-4V. Annealed. Forgings De 150 mm supersedes BS 3TA 13:2009 ISBN ACE/61/-/49 BS EN :2012 Aerospace series. Cable, electrical, for digital data transmission. General ISBN ACE/6 BS EN ISO :2012 Acoustics. Measurement of room acoustic parameters. Open plan offices Together with BS EN ISO :2009 and BS EN ISO :2008 it supersedes BS EN ISO 3382:2000, which is withdrawn ISBN EH/1/6 BS EN :2012 Aerospace series. Cable, electrical, fire resistant. Single and twisted multicore assembly, screened (braided) and jacketed. Operating temperatures between -65ºC and 260ºC. DN family. Lightweight. UV Laser printable. Product standard ISBN ACE/6 BS EN :2012 Aerospace series. Cable, electrical, fire resistant. Single and twisted multicore assembly, screened (braided) and jacketed. Operating temperatures between -65ºC and 260ºC. DW family. Lightweight two-core gauge 24 for data transmission. UV laser printable. Product standard ISBN ACE/6 BS EN :2012 Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family. General ISBN ACE/6 BS EN :2012 Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family. Tin plated copper. Operating temperatures, between -65ºC and 135ºC. Single extruded wall for enclosed applications. UV laser printable. Product standard ISBN ACE/6 BS EN :2012 Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family. Tin plated copper. Operating temperatures, between -65ºC and 135ºC. Dual extruded wall for open applications. UV laser printable. Product standard ISBN ACE/6 BS EN :2012 Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family. Silver plated copper. Operating temperatures, between -65ºC and 150ºC. Single extruded wall for enclosed applications. UV laser printable. Product standard ISBN ACE/6 BS EN :2012 Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family. Silver plated copper. Operating temperatures, between -65ºC and 150ºC. Dual extruded wall for open applications. UV laser printable. Product standard ISBN ACE/6 BS EN :2012 Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family. Nickel plated copper. Operating temperatures, between -65ºC and 150ºC. Dual extruded wall for open applications. UV laser printable. Product standard ISBN ACE/6 BS EN :2012 Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family. BP. Nickel plated copper. Operating temperatures, between -65ºC and 150ºC. Dual extruded wall for open applications with additional protection in areas of high vibration, cable flexing and fluid contamination. UV laser printable. Product standard ISBN ACE/6 BS EN :2012 Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family. BJ. Nickel plated copper. Operating temperatures, between -65ºC and 150ºC. Single extruded wall for use as cable cores or within equipment in areas of high vibration, cable flexing and fluid contamination. UV laser printable. Product standard ISBN ACE/6 BS EN 4704:2012 Aerospace series. Tartaric-Sulphuric-Acid anodizing of aluminium and aluminium wrought alloys for corrosion protection and paint pre-treatment (TSA) ISBN ACE/65 BS EN ISO 8692:2012 Water quality. Fresh water algal growth inhibition test with unicellular green algae supersedes BS EN ISO 8692:2004 ISBN EH/3/5 BS EN 9137:2012 Quality management systems. Guidance for the Application of AQAP 2110 within an EN 9100 Quality Management System ISBN ACE/1 BS EN ISO 9223:2012 Corrosion of metals and alloys. Corrosivity of atmospheres. Classification, determination and estimation Together with BS EN ISO 9224:2011, BS EN ISO 9225:2011, and BS EN ISO 9226:2011, it supersedes BS EN 12500:2000, which is withdrawn ISBN ISE/NFE/8 BS EN ISO 9224:2012 Corrosion of metals and alloys. Corrosivity of atmospheres. Guiding values for the corrosivity categories Together with BS EN ISO 9223:2011, BS EN ISO 9225:2011, and BS EN ISO 9226:2011, it supersedes BS EN 12500:2000, which is withdrawn ISBN ISE/NFE/8 BS EN ISO 9225:2012 Corrosion of metals and alloys. Corrosivity of atmospheres. Measurement of environmental parameters affecting corrosivity of atmospheres Together with BS EN ISO 9223:2011, BS EN ISO 9224:2011, and BS EN ISO 9226:2011, it supersedes BS EN 12500:2000, which is withdrawn ISBN members, non-members ISE/NFE/8 BS EN ISO 9226:2012 Corrosion of metals and alloys. Corrosivity of atmospheres. Determination of corrosion rate of standard specimens for the evaluation of corrosivity Together with BS EN ISO 9223:2011, BS EN ISO 9224:2011 and BS EN ISO 9225:2011, it supersedes BS EN 12500:2000 which is withdrawn ISBN ISE/NFE/8 BS EN :2012 Hollow bars for machining. Technical delivery conditions. Stainless steels with specified machinability properties ISBN ISE/110 BS EN ISO :2012 Ceramic tiles. Determination of modulus of rupture and breaking strength supersedes BS EN ISO :1997 ISBN B/539 BS EN ISO 10582:2012 Resilient floor coverings. Heterogeneous poly(vinyl chloride) floor coverings. Specification ISBN PRI/60 10 Prices may be subject to change. Update Standards April 2012

11 BS EN ISO 10595:2012 Resilient floor coverings. Semiflexible/vinylcomposition (VCT) poly(vinyl chloride) floor tiles. Specification ISBN PRI/60 BS EN :2012 Industrial valves. Testing of metallic valves. Tests, test procedures and acceptance criteria. Supplementary requirements supersedes BS EN :2002 ISBN PSE/18/1 BS EN ISO 12696:2012 Cathodic protection of steel in concrete supersedes BS EN 12696:2000 ISBN members, non-members GEL/603 BS EN ISO 12855:2012 Electronic fee collection. Information exchange between service provision and toll charging ISBN members, non-members EPL/278 BS EN :2012 Shell boilers. Operating instructions ISBN PVE/2 BS EN :2012 Protective helmets. Test methods. Shock absorption supersedes BS EN :2000 ISBN PH/6 BS EN :2012 Protective helmets. Test methods. Retention system effectiveness supersedes BS EN :2000 ISBN PH/6 BS EN :2012 Protective helmets. Test methods. Retention system strength supersedes BS EN :2000 ISBN PH/6 BS EN :2012 Protective helmets. Test methods. Field of vision supersedes BS EN :2000 ISBN PH/6 BS EN :2012 Protective helmets. Test methods. Resistance to radiant heat supersedes BS EN :2000 ISBN PH/6 BS EN 13272:2012 Railway applications. Electrical lighting for rolling stock in public transport systems supersedes BS EN 13272:2001 ISBN RAE/4/-/7 BS EN :2011 Non-electrical equipment intended for use in potentially explosive atmospheres. Protection by constructional safety c supersedes BS EN :2003 ISBN members, non-members EXL/23 BS EN ISO 13485:2012 Medical devices. Quality management systems. Requirements for regulatory purposes supersedes BS EN ISO 13485:2003 which remains current ISBN members, non-members CH/210/1 BS EN 13781:2012 Protective helmets for drivers and passengers of snowmobiles and bobsleighs supersedes BS EN 13781:2002 ISBN PH/6/6 BS EN 14052:2012 High performance industrial helmets supersedes BS EN 14052:2005 ISBN PH/6/1 BS EN ISO 14088:2012 Leather. Chemical tests. Quantitative analysis of tanning agents by filter method ISBN TCI/69 BS EN ISO 14174:2012 Welding consumables. Fluxes for submerged arc welding and electroslag welding. Classification supersedes BS EN 760:1996 ISBN WEE/39 BS EN 14985:2012 Cranes. Slewing jib cranes supersedes BS EN 14985:2007 ISBN members, non-members MHE/3/3 BS EN 15621:2012 Animal feeding stuffs. Determination of calcium, sodium, phosphorus, magnesium, potassium, sulphur, iron, zinc, copper, manganese and cobalt after pressure digestion by ICP-AES supersedes DD CEN/TS 15621:2007 ISBN members, non-members AW/10 BS EN 15804:2012 Sustainability of construction works. Environmental product declarations. Core rules for the product category of construction products supersedes BS ISO 21930:2007 ISBN members, non-members B/558 BS EN 16012:2012 Thermal insulation for buildings. Reflective insulation products. Determination of the declared thermal performance ISBN members, non-members B/540/9 BS EN 16102:2011 Intelligent transport systems. ecall. Operating requirements for third party support ISBN members, non-members EPL/278 BS EN 16159:2012 Animal feeding stuffs. Determination of selenium by hydride generation atomic absorption spectrometry (HGAAS) after microwave digestion (digestion with 65 % nitric acid and 30 % hydrogen peroxide) ISBN AW/10 BS EN 16206:2012 Animal feeding stuffs. Determination of arsenic by hydride generation atomic absorption spectrometry (HGAAS) after microwave pressure digestion (digestion with 65 % nitric acid and 30 % hydrogen peroxide) ISBN AW/10 BS EN ISO 19148:2012 Geographic information. Linear referencing ISBN members, non-members IST/36 BS EN ISO 20347:2012 Personal protective equipment. Occupational footwear supersedes BS EN ISO 20347:2004 ISBN members, non-members PH/1 BS EN ISO 24345:2012 Resilient floor coverings. Determination of peel resistance supersedes BS EN 431:1994 ISBN PRI/60 BS EN ISO 24346:2012 Resilient floor coverings. Determination of overall thickness supersedes BS EN 428:1993 ISBN PRI/60 Update Standards April 2012 Prices may be subject to change. 11

12 BS EN Publications continued... BS EN ISO 24442:2011 Cosmetics. Sun protection test methods. In vivo determination of sunscreen UVA protection ISBN members, non-members CW/217 BS EN ISO :2011 Cardiovascular implants. Endovascular devices. Vena cava filters Together with BS EN ISO :2009 and BS EN ISO :2009, it supersedes BS EN :1998+A1:2009 which is withdrawn ISBN members, non-members CH/150/2 BS EN ISO 26987:2012 Resilient floor coverings. Determination of staining and resistance to chemicals supersedes BS EN 423:2002 ISBN PRI/60 BS EN 50317:2012 Railway applications. Current collection systems. Requirements for and validation of measurements of the dynamic interaction between pantograph and overhead contact line supersedes BS EN 50317:2002+A2:2007 ISBN GEL/9/3 BS EN :2012 Fibre organisers and closures to be used in optical fibre communication systems. Product specifications. Sealed dome fibre splice closures Type 1, for category S & A supersedes BS EN :2006 ISBN members, non-members GEL/86/2 BS EN :2011 Fixed resistors for use in electronic equipment. Generic specification supersedes BS EN :2001+A1:2001, BS QC :1992, BS QC :1992 and BS QC :1992 ISBN members, non-members EPL/40X BS EN :2012 Connectors for electronic equipment. Tests and measurements. Impact tests (free connectors). Test 7b. Mechanical strength impact partially supersedes BS :1993 ISBN EPL/48 BS EN :2012 Luminaires. Particular requirements. Recessed luminaires supersedes BS EN :1997 which remains current ISBN CPL/34/4 BS EN 60676:2012 Industrial electroheating equipment. Test methods for direct arc furnaces supersedes BS EN 60676:2002 ISBN PEL/27 BS EN :2012 Fibre optic interconnecting devices and passive components. Connectors for optical fibres and cables. Blank detail specification supersedes BS EN :2007 ISBN GEL/86/2 BS EN :2011 Safety of transportable motor-operated electric tools. Particular requirements for band saws supersedes BS EN :2002 which remains current ISBN CPL/116/3 BS EN :2012 Fibre optic interconnecting devices and passive components. Adaptors for fibre optic connectors. Blank detail specification supersedes BS EN :2006 ISBN GEL/86/2 BS EN :2012 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Wavelength dependence of attenuation and return loss of single mode components supersedes BS EN :2001 and BS EN :2001 ISBN members, non-members GEL/86/2 BS EN :2012 Fibre optic interconnecting devices and passive components. Fibre optic fan-outs. Blank detail specification supersedes BS EN :2006 ISBN GEL/86/2 BS EN :2011 Communication networks and systems for power utility automation. Specific communication service mapping (SCSM). Sampled values over ISO/IEC supersedes BS EN :2004 ISBN members, non-members PEL/57 BS EN :2012 Mechanical structures for electronic equipment. Outdoor enclosures. Design guidelines supersedes BS EN :2000 ISBN EPL/48 BS EN :2012 Mechanical structures for electronic equipment. Outdoor enclosures. Coordination dimensions supersedes BS EN :2000, BS EN :2000 and BS EN :2000 ISBN EPL/48 BS EN :2012 Mechanical structures for electronic equipment. Outdoor enclosures. Environmental requirements, tests and safety aspects supersedes BS EN :2001 ISBN EPL/48 BS EN :2012 Electronics assembly technology. Selection guidance of environmental and endurance test methods for solder joints supersedes DD IEC/PAS :2008 ISBN members, non-members EPL/501 BS EN :2012 Fibre optic active components and devices. Reliability standards. Laser modules used for telecommunication ISBN GEL/86/3 BS EN :2012 LCD backlight unit. Terminology and letter symbols ISBN EPL/47 BS EN :2012 Surface Acoustic Wave (SAW) and Bulk Acoustic Wave (BAW) duplexers of assessed quality. Guidelines for the use ISBN EPL/49 BS ENs IMPLEMENTED BY AMENDMENT For the standards listed below see also the Corrigenda to British Standards and Updated British Standards sections of this issue of Update Standards. BS EN ISO 23997:2012 Resilient floor coverings. Determination of mass per unit area PRI/60 Implementation of European Standard EN ISO by amendment to BS ISO 23997:2007 BS EN ISO :2012 Resilient and laminate floor coverings. Determination of indentation and residual indentation. Residual indentation PRI/60 Implementation of European Standard EN ISO by amendment to BS ISO : Prices may be subject to change. Update Standards April 2012

13 If you let corruption happen, it may not be just the perpetrator that s the criminal it could be you. Put adequate measures in place to help avoid prosecution In 2010, The Bribery Act came into force. In essence, it means that it s not just the perpetrators of criminal activities that could face prosecution but also anyone that doesn t put adequate measures in place to prevent corrupt practices from happening. But what does adequate measures mean? Ultimately, it s up to the Courts to decide they are the only authority that can interpret and act on the law. But help is at hand. Introducing BS BS is a complete management system. It s a series of step-by-step checklists and guidance to help you make the right decisions to close the loop on corruption. And, importantly, as well as giving your stakeholders confidence, by following this British Standard you arm yourself with a strong defence if you were ever in the predicament of facing an allegation. Discover more at: BSI has developed a new British Standard that will allow you to demonstrate that you have done everything you can to comply with the Bribery Act To contact us visit or contact BSI Customer Services quoting marketing reference code US1204 Tel +44 (0) Fax +44 (0) orders@bsigroup.com raising standards worldwide Standards and publications may also be ordered via the BSI shop at *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0) BSI British Standards Institution 2012

14 BS ENs Implemented by Amendment continued... BS EN ISO 25762:2012 Plastics. Guidance on the assessment of the fire characteristics and fire performance of fibrereinforced polymer composites Implementation of European Standard EN ISO by amendment to BS ISO 25762:2009 BS IMPLEMENTATIONS BS Implementations comprise the ISO or IEC text without any national deviation and with front and back cover indicating the UK committee responsible. No other information will normally be added. Note: The date referenced in the identifier is the date of the international standard. BS ISO 3129:2012 Wood. Sampling methods and general requirements for physical and mechanical testing of small clear wood specimens ISBN B/543 BS ISO 4150:2011 Green coffee or raw coffee. Size analysis. Manual and machine sieving supersedes BS :1991 ISBN AW/15 BS ISO 5628:2012 Paper and board. Determination of bending stiffness. General principles for two-point, three-point and four-point methods supersedes BS 7424:1991 ISBN PAI/11 BS ISO 6987:2012 Indexable hard material inserts with rounded corners, with partly cylindrical fixing hole. Dimensions supersedes BS :1998 ISBN MTE/18 BS ISO/IEC , 9-11, 13-14:2011 (CD-ROM) Information technology. Database languages. SQL. Various parts supersedes BS ISO/IEC :2010 ISBN IST/40 BS ISO 10502:2012 Aerospace. Hose assemblies in polytetrafluoroethylene (PTFE) for use up to 232ºC and kpa. Technical specifications and requirements ISBN ACE/69 BS ISO 10552:2012 Timekeeping instruments. Crowns and sealed tubes. Designs and dimensions ISBN STI/53 BS ISO :2012 Prefilled syringes. Seals for dental local anaesthetic cartridges ISBN CH/212 BS ISO :2012 Prefilled syringes. Plunger stoppers for injectables ISBN CH/212 BS ISO :2012 Soil quality. Determination of the effects of pollutants on soil flora. Effects of contaminated soil on the emergence and early growth of higher plants supersedes BS ISO :2005 ISBN EH/4 BS ISO :2012 Tractors and machinery for agriculture and forestry. Serial control and communications data network. Tractor ECU supersedes BS ISO :2002 ISBN AGE/6 BS ISO 12231:2012 Photography. Electronic still picture imaging. Vocabulary supersedes BS ISO 12231:2005 ISBN members, non-members CPW/42 BS ISO :2012 Road vehicles. LED lamp characteristics for bulb compatible failure detection. LED lamps used as direction indicators ISBN AUE/16 BS ISO :2012 Electronic archiving. Specifications concerning the design and the operation of an information system for electronic information preservation ISBN members, non-members IDT/1/3 BS ISO :2012 Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry. Sample preparation supersedes BS ISO :2001 ISBN members, non-members EH/2/2 BS ISO 15388:2012 Space systems. Contamination and cleanliness control ISBN ACE/68/-/1 BS ISO 16131:2012 Leather. Upholstery leather characteristics. Selection of leather for furniture ISBN TCI/69 BS ISO 16363:2012 Space data and information transfer systems. Audit and certification of trustworthy digital repositories ISBN members, non-members ACE/68/-/7 BS ISO 16431:2012 Hydraulic fluid power. System clean-up procedures and verification of cleanliness of assembled systems supersedes PD ISO/TS 16431:2002 ISBN MCE/18/-/6 BS ISO :2012 Graphic technology. Extensible metadata platform (XMP) specification. Data model, serialization and core properties ISBN members, non-members PAI/43 BS ISO 17474:2012 Corrosion of metals and alloys. Conventions applicable to electrochemical measurements in corrosion testing ISBN ISE/NFE/8 BS ISO/IEC :2012 Information technology. Biometric performance testing and reporting. Testing methodologies for operational evaluation ISBN members, non-members IST/44 BS ISO/IEC :2012 Information technology. Service management. Guidance on the application of service management systems supersedes BS ISO/IEC :2005 ISBN members, non-members IST/15/-/8 BS ISO :2011 Digital cinema (D-cinema) distribution master. Additional frame rates ISBN CPW/36 14 Prices may be subject to change. Update Standards April 2012

15 BS ISO :2011 Digital cinema (D-cinema) distribution master. Serial digital interface signal formatting for additional frame rates level AFR2 and level AFR4 ISBN CPW/36 BS ISO 27185:2012 Cardiac rhythm management devices. Symbols to be used with cardiac rhythm management device labels, and information to be supplied. General requirements ISBN members, non-members CH/150/2 BS ISO/IEC 40230:2011 Information technology. W3C SOAP Message Transmission Optimization Mechanism ISBN members, non-members ICT/-/1 BS ISO/IEC/IEEE 42010:2011 Systems and software engineering. Architecture description supersedes BS ISO/IEC 42010:2007 ISBN members, non-members IST/15 BS IEC :2011 Radiation protection instrumentation. Radon and radon decay product measuring instruments. Specific requirements for radon decay product measuring instruments supersedes BS 7515:1995 and BS IEC :2002 ISBN NCE/2 PUBLISHED DOCUMENTS PD CEN/TR :2012 Flanges and their joints. Design rules for gasketed circular flange connections. Calculation method for full face gasketed joints ISBN PSE/15/2 PD ISO/TR :2011 Gas cylinders. Guidance for design of composite cylinders. Stress rupture of fibres and burst ratios related to test pressure ISBN PVE/3/3 PD CEN ISO/TR 13115:2011 Non-destructive testing. Methods for absolute calibration of acoustic emission transducers by the reciprocity technique ISBN WEE/46 PD CEN/TS :2012 Foodstuffs. Detection of food allergens by molecular biological methods. Celery (Apium graveolens). Qualitative determination of a specific DNA sequence in cooked sausages by real-time PCR ISBN AW/275 PD ISO/TS :2009 Prerequisite programmes on food safety. Food manufacturing ISBN AW/90 PD IEC/TR 61831:2011 On-line analyser systems. Guide to design and installation supersedes BS IEC 61831:1999 ISBN members, non-members GEL/65/4 PD IEC/TR 62750:2011 Unified fluorescent lamp dimming standard calculations ISBN CPL/34/1 DRAFTS FOR DEVELOPMENT DD ISO/TS 11869:2012 Fermented milks. Determination of titratable acidity. Potentiometric method supersedes BS :1997 ISBN members, non-members AW/5 PUBLICLY AVAILABLE SPECIFICATIONS Publicly Available Specifications (formerly Product Assessment Specifications) are issued to provide an interim document where there is a market need but where a full British or European Standard has yet to be published. PAS 2030:2012 Improving the energy efficiency of existing buildings. Specification for installation process, process management and service provision ISBN members, non-members SPECIALIST BOOKS FROM BSI BIP 0123:2012 Telecommunications Cabling. Guidance on Standards and Best Practice for Construction Projects ISBN members, non-members CORRIGENDA TO BRITISH STANDARDS Most amendments are not issued separately. Those that make significant changes to a standard are incorporated into the standard which is reissued (see Updated British Standards ). British Standards which have been corrected via corrigenda are available on request, free of charge to past purchasers of the standard. All amendments and corrigenda to date of despatch are included within any main publication when ordered for the first time. The following corrigenda to British Standards were made available last month. BS EN :2005+A2:2011 Eurocode 8. Design of structures for earthquake resistance. Bridges CORRIGENDUM 2 B/525/8 Also incorporates Corrigendum 1 and Amendments 1 & 2 BS EN :2011 Non-electrical equipment intended for use in potentially explosive atmospheres. Protection by constructional safety c CORRIGENDUM 1 EXL/23 BS EN :2011 Sustainability of construction works. Assessment of buildings. Framework for the assessment of environmental performance CORRIGENDUM 1 B/558 BS EN ISO 23997:2012 Resilient floor coverings. Determination of mass per unit area CORRIGENDUM 1 PRI/60 BS EN ISO :2012 Resilient and laminate floor coverings. Determination of indentation and residual indentation. Residual indentation CORRIGENDUM 1 PRI/60 BS EN ISO 25762:2012 Plastics. Guidance on the assessment of the fire characteristics and fire performance of fibrereinforced polymer composites CORRIGENDUM 1 BS EN :2010 Railway applications. Rolling stock. Pantographs. Characteristics and tests. Pantographs for main line vehicles CORRIGENDUM 1 GEL/9/2 BS EN :2002+A11:2010 Household and similar electrical appliances. Safety. Particular requirements for electric irons CORRIGENDUM 1 CPL/61/7 Also incorporates Amendments 1, 2 & 11 Update Standards April 2012 Prices may be subject to change. 15

16 Corrigenda to British Standards continued... BS EN 61984:2009 Connectors. Safety requirements and tests CORRIGENDUM 1 EPL/48 BS EN :2010 Fuel cell technologies. Micro fuel cell power systems. Safety CORRIGENDUM 1 GEL/105 BS ISO :2011 (BS 5703:2011) Control charts. Cumulative sum charts CORRIGENDUM 1 SS/4 BS ISO/IEC :2012 Information technology. Biometric performance testing and reporting. Testing methodologies for operational evaluation CORRIGENDUM 1 IST/44 UPDATED BRITISH STANDARDS The following standards have been amended and the amendments have been incorporated into an updated standard. NOTE: Updated British Standards must be reordered as the amendments are not available separately. BS EN 1459:1998+A3:2012 Safety of industrial trucks. Self-propelled variable reach trucks AMENDMENT members, non-members MHE/7 Also incorporates Amendments 1 & 2 and Corrigendum 1 BS EN ISO :2003+A1:2011 Traveller irrigation machines. Operational characteristics and laboratory and field test methods AMENDMENT members, non-members AGE/30 Also incorporates Corrigendum 1 BS EN ISO :2010+A1:2012 Acoustics. Laboratory measurement of sound insulation of building elements. Application rules for specific products AMENDMENT members, non-members EH/1/6 BS EN ISO :2006+A1:2012 Ophthalmic implants. Intraocular lenses. Clinical investigations AMENDMENT 1 CH/172/7 BS EN ISO 14021:2001+A1:2011 Environmental labels and declarations. Selfdeclared environmental claims (Type II environmental labelling) AMENDMENT 1 SES/1/3 Also incorporates Corrigendum 1 BS EN :2007+A1:2012 LPG equipment and accessories. Construction and performance of LPG equipment for automotive filling stations. Components other than dispensers and installation requirements AMENDMENT 1 PVE/19 BS EN :2010+A1:2012 Floating leisure articles for use on and in the water. Additional specific safety requirements and test methods for Class B devices AMENDMENT members, non-members SW/136 BS EN :1994+A2:2011 Mechanical vibration. Laboratory method for evaluating vehicle seat vibration. Basic requirements AMENDMENT 2 GME/21/6 Also incorporates Amendment 1 BS EN :2007+A1:2012 Three-phase oil-immersed distribution transformers 50 Hz, from 50 kva to 2500 kva with highest voltage for equipment not exceeding 36 kv. General requirements AMENDMENT 1 PEL/14 BS EN :2006+A1:2012 Luminaires. Particular requirements. Ground recessed luminaires AMENDMENT 1 CPL/34/4 Also incorporates Corrigendum 1 BS EN :2006+A11:2011 Medical electrical equipment. General requirements for basic safety and essential performance AMENDMENT members, non-members CH/62/1 Also incorporates Corrigendum 1 BS EN :2009+A11:2011 Medical electrical equipment. Particular requirements for the basic safety and essential performance of infant transport incubators AMENDMENT members, non-members CH/62/4 BS EN :2009+A11:2011 Medical electrical equipment. Particular requirements for the basic safety and essential performance of infant radiant warmers AMENDMENT members, non-members CH/62/4 BS EN :2009+A11:2011 Medical electrical equipment. Particular requirements for the basic safety and essential performance of heating devices using blankets, pads and mattresses and intended for heating in medical use AMENDMENT members, non-members CH/62/4 BS EN :2009+A11:2011 Medical electrical equipment. Particular requirements for the basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery AMENDMENT 11 CH/62/4 BS ISO :2005+A1:2012 Tyres (ply rating marked series) and rims for agricultural tractors and machines. Tyre designation and dimensions, and approved rim contours AMENDMENT 1 AUE/4 BS ISO/IEC 7810:2003+A2:2012 Identification cards. Physical characteristics AMENDMENT 2 IST/17 Also incorporates Amendment 1 BS ISO/IEC :2010+A1:2011 Identification cards. Contactless integrated circuit cards. Proximity cards. Radio frequency power and signal interface AMENDMENT members, non-members IST/17 BS ISO 14898:1999+A1:2011 Plastics. Aromatic isocyanates for use in the production of polyurethane. Determination of acidity AMENDMENT 1 BS IEC :1992+A1:2009 Harmonized system of quality assessment for electric components. Varistors for use in electronic equipment. Sectional specification for surge suppression varistors AMENDMENT 1 EPL/40X BS 6SP 4:2000+A3:2012 Pins headed, plain shank, drilled, steel alloy and corrosion resisting steel with a strength class 880 MPa AMENDMENT 3 ACE/12 Also incorporates Amendments 1 & 2 and Corrigendum 1 BS 2SP :1956+A2:2012 Specifications for turnbarrels, tension rods and swaged cable-end connections (unified threads) cadmium plated for aircraft AMENDMENT 2 ACE/12 Also incorporates Amendment 1 16 Prices may be subject to change. Update Standards April 2012

17 SPECIAL ANNOUNCEMENTS Comments can be sent by or by post to named contacts at: BSI Head Office 389 Chiswick High Road London W4 4AL Tel: Recruitment for CEN Consultant in the field of Safety of Toys (Directive 2009/48/EC) In anticipation of a contract between CEN and EC/EFTA for consultant services, the CEN- CENELEC Management Centre is launching a call for candidates in the above field. The successful candidate should be able to take up their post on 1st July 2012, the actual number of working days to be contracted will be confirmed during the selection process. The initial contract will be for six months with a possibility of subsequent renewal. For further information regarding responsibilities of CEN-CENELEC consultants, candidates should refer to CEN/CENELEC Guide 15 Tasks and responsibilities of the New Approach consultants freely available at: ftp://ftp.cen.eu/boss/reference_documents/gui des/cen_clc/cen_clc_15.pdf Applications in electronic file format including CV and supporting letter (both in English) should be submitted by 22 April, 2012 to: consultants@cencenelec.eu Contact: Ian Greensmith ian.greensmith@bsigroup.com BRITISH STANDARDS PROPOSED FOR CONFIRMATION It is BSI policy for every standard to be reviewed by the technical committee responsible not more than five years after publication, to establish whether it is still current and, if it is not, to identify and set in hand appropriate action. Circumstances may lead to an earlier review. Confirmation indicates the continuing currency of a standard. A note of any objections to the proposals below should be sent to Debbie Stead, Head of Committee Service Centre Operations, BSI Head Office, 389 Chiswick High Road, London W4 4AL or via to BSUKoperations.review@bsigroup.com by 31 May, BS 7896:1997 Securities. Specification for the format and structure of names and addresses used in securities transactions for the business of registrars IST/12 BRITISH STANDARDS REVIEWED AND CONFIRMED It is BSI policy for every standard to be reviewed by the technical committee responsible not more than five years after publication, to establish whether it is still current and, if it is not, to identify and set in hand appropriate action. Confirmation indicates the continuing currency of a standard. Where any standard in this list has been amended since publication, confirmation includes all amendments published to date. Reference to a particular amendment indicates that it is published concurrently with the confirmation. BS :2001 (BS EN ISO 6865:2001) Methods for analysis of animal feeding stuffs. Determination of crude fibre content. Method with intermediate filtration AW/10 DD CEN/TS :2008 Durability of wood and wood-based products. Determination of emissions from preservative treated wood to the environment. Wood held in the storage yard after treatment and wooden commodities exposed in Use Class 3 (not covered, not in contact with the ground). Laboratory method B/515 BS EN 113:1997 Wood preservatives. Test method for determining the protective effectiveness against wood destroying basidiomycetes. Determination of the toxic values B/515 BS EN 351-1:2007 Durability of wood and wood-based products. Preservative-treated solid wood. Classification of preservative penetration and retention B/515 BS EN 351-2:2007 Durability of wood and wood-based products. Preservative-treated solid wood. Guidance on sampling for the analysis of preservativetreated wood B/515 BS EN 1390:2006 Wood preservatives. Determination of the eradicant action against Hylotrupes bajulus (Linnaeus) larvae. Laboratory method B/515 BS EN :2000 Welded static non-pressurized thermoplastic tanks. Calculation of vertical cylindrical tanks PRI/62 BS EN :2000 Welded static non-pressurized thermoplastic tanks. Design and calculation of flanged joints PRI/62 BS ISO 6798:1995 Reciprocating internal combustion engines. Measurement of emitted airborne noise. Engineering method and survey method MCE/14 BS ISO :2001 Reference neutron radiations. Characteristics and methods of production NCE/2 BRITISH STANDARDS PROPOSED FOR WITHDRAWAL A note of any objections to these withdrawals should be sent to Debbie Stead, Head of Committee Service Centre Operations, BSI Head Office, 389 Chiswick High Road, London W4 4AL or via to BSUKoperations.review@bsigroup.com by 31 May, Where any standard in this list has been amended since publication, a proposal to withdraw also includes all amendments published to date. BS :1994 Carpet cleaning products. Methods of sampling and test. General methods for formulations used in liquid form I/- This standard has been proposed for withdrawal as the technical committees that prepared these standards have been disbanded, so the standards cannot be maintained BS :1995 Carpet cleaning products. Methods of sampling and test. Determination of cleaning performance of formulations designed for use with spray extraction machines I/- This standard has been proposed for withdrawal as the technical committees that prepared these standards have been disbanded, so the standards cannot be maintained BS :1994 Carpet cleaning products. Specification for high foam formulations used in liquid form I/- This standard has been proposed for withdrawal as the technical committees that prepared these standards have been disbanded, so the standards cannot be maintained BS :1995 Carpet cleaning products. Specification for spray extraction machine formulations used in liquid form I/- This standard has been proposed for withdrawal as the technical committees that prepared these standards have been disbanded, so the standards cannot be maintained BS :1995 Carpet cleaning products. Specification for impregnated powder formulations I/- This standard has been proposed for withdrawal as the technical committees that prepared these standards have been disbanded, so the standards cannot be maintained Update Standards April 2012 Prices may be subject to change. 17

18 British Standards Proposed for Withdrawal continued... BS 4448:1988 Specification for school exercise books and papers I/- This standard has been proposed for withdrawal as the technical committees that prepared these standards have been disbanded, so the standards cannot be maintained BRITISH STANDARDS WITHDRAWN If any standard in this list has been amended since publication, all amendments published to date are also withdrawn BS :1998 (ISO 6987:1998) Hardmetal insert tooling. Indexable hard material inserts with rounded corners, with partly cylindrical fixing hole. Dimensions MTE/18 Superseded by BS ISO 6987:2012 BS :1986 Fire safety signs, notices and graphic symbols. Specification for self-luminous fire safety signs PH/8/1 This standard is withdrawn as it is not in line with current practice and technology. It is concerned with the use of radioactive material which has since been subject to changes in disposal certificates and legislation due to the use of radioactive mater BS :1991 (ISO 4150:1991) Methods of test for coffee and coffee products. Green coffee: size analysis by manual sieving AW/15 Superseded by BS ISO 4150:2011 BS :1997 (ISO 11869:1997) Methods for analysis of milk-based products. Determination of titratable acidity of yogurt (potentiometric method) AW/5 Superseded by DD ISO/TS 11869:2012 BS 7424:1991 (ISO 5628:1990) Guide to general principles for determination of the bending stiffness of paper and board by static methods PAI/11 Superseded by BS ISO 5628:2012 BS 7515:1995 (IEC 61263:1994) Radiation protection instrumentation. Portable potential alpha energy meter for rapid measurements in mines NCE/2 Superseded by BS IEC :2011 BS :1996 Guide to the acquisition and management of meteorological precipitation data. Network design. The user requirement for precipitation data CPI/113 Superseded by BS :2012 and BS :2012 BS :1996 Guide to the acquisition and management of meteorological precipitation data. Network design. Network design and monitoring CPI/113 Superseded by BS :2012 and BS :2012 BS :1996 Guide to the acquisition and management of meteorological precipitation data. Field practices and data management. Areal rainfall CPI/113 Superseded by BS :2012 BS :1999 Guide to the acquisition and management of meteorological precipitation data. Specification for raingauges. Storage raingauges. Storage raingauges CPI/113 Superseded by BS :2012 and BS :2012 BS :1999 Guide to the acquisition and management of meteorological precipitation data. Specification for raingauges. Storage raingauges. Tipping bucket gauges CPI/113 Superseded by BS :2012 and BS :2012 BS EN 423:2002 Resilient floor coverings. Determination of resistance to staining PRI/60 Superseded by BS EN ISO 26987:2012 BS EN 428:1993 Resilient floor coverings. Determination of overall thickness PRI/60 Superseded by BS EN ISO 24346:2012 BS EN 430:1994 Resilient floor coverings. Determination of mass per unit area PRI/60 Superseded by BS EN ISO 23997:2012 BS EN 431:1994 Resilient floor coverings. Determination of peel resistance PRI/60 Superseded by BS EN ISO 24345:2012 BS EN 433:1994 Resilient floor coverings. Determination of residual indentation after static loading PRI/60 Superseded by BS EN ISO :2012 BS EN 760:1996 Welding consumables. Fluxes for submerged arc welding. Classification WEE/39 Superseded by BS EN ISO 14174:2012 BS EN 1457:1999 Chimneys. Clay/ceramic flue liners. Requirements and test methods B/506/3 Superseded by BS EN :2012 and BS EN :2012 BS EN ISO 3382:2000 Acoustics. Measurement of the reverberation time of rooms with reference to other acoustical parameters EH/1/6 Superseded by BS EN ISO :2009, BS EN ISO :2008 and BS EN ISO :2012 BS EN :1998+A1:2009 Non active surgical implants. Particular requirements for cardiac and vascular implants. Endovascular devices CH/150/2 Superseded by BS EN ISO :2009, BS EN ISO :2009 and BS EN ISO :2011 BS EN 12500:2000 Protection of metallic materials against corrosion. Corrosion likelihood in atmospheric environment. Classification, determination and estimation of corrosivity of atmospheric ISE/NFE/8 Superseded by BS EN ISO 9223:2012, BS EN ISO 9224:2012, BS EN ISO 9225:2012 and BS EN ISO 9226:2012 BS EN 12696:2000 Cathodic protection of steel in concrete GEL/603 Superseded by BS EN ISO 12696:2012 DD CEN/TS 15621:2007 Animal feeding stuffs. Determination of calcium, sodium, phosphorus, magnesium, potassium, sulphur, iron, zinc, copper, manganese, cobalt and molybdenum after pressure AW/10 Superseded by BS EN 15621:2012 BS EN :2004 Luminaires. General requirements and tests CPL/34/4 Superseded by BS EN :2008 BS EN :2007 Medical electrical equipment. Particular requirements for the safety of high frequency surgical equipment CH/62/4 Superseded by BS EN :2009 BS EN :1997 (BS :1997, IEC :1990) Medical electrical equipment. Particular requirements for safety. Specification for baby incubators CH/62/4 Superseded by BS EN :2009 BS EN :1997 (BS :1997, IEC :1994) Medical electrical equipment. Particular requirements for safety. Specification for infant radiant warmers CH/62/4 Superseded by BS EN :2009 BS EN :2003 Hand-held motor-operated electric tools. Safety. Particular requirements for concrete vibrators CPL/116/2 Superseded by BS EN :2003+A1:2009 BS EN :2001 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Wavelength dependence of attenuation GEL/86/2 Superseded by BS EN : Prices may be subject to change. Update Standards April 2012

19 BS EN :2000 Mechanical structures for electronic equipment. Outdoor enclosures. Detail specification. Dimensions for cabinets EPL/48/-/4 Superseded by BS EN :2012 BS EN :2000 Mechanical structures for electronic equipment. Outdoor enclosures. Detail specification. Dimensions for cases EPL/48/-/4 Superseded by BS EN :2012 BS EN :2005 High-voltage switchgear and controlgear. Inductive load switching PEL/17/1 Superseded by BS EN :2009 PD ISO/TS 16431:2002 Hydraulic fluid power. Assembled systems. Verification of cleanliness MCE/18/-/6 Superseded by BS ISO 16431:2012 BS ISO 21930:2007 Sustainability in building construction. Environmental declaration of building products B/558 Superseded by BS EN 15804:2012 BS ISO :2010 Sustainability in building construction. Framework for methods of assessment of the environmental performance of construction works. Buildings B/558 Superseded by BS EN :2011 BS ISO/IEC 42010:2007 Systems and software engineering. Recommended practice for architectural description of software-intensive systems IST/15 Superseded by BS ISO/IEC/IEEE 42010:2011 DD IEC/PAS :2008 Electronics assembly technology. Selection guidance of environmental and endurance test methods for solder joints EPL/501 Superseded by BS EN :2012 BS IEC 61831:1999 On-line analyser systems. Guide to design and installation GEL/65/4 Superseded by PD IEC/TR 61831:2011 BS 3A 116:1962 Specification for steel pan head bolts (Unified threads) for aircraft ACE/12 Superseded by BS 4A 116:2012 BS QC :1992 (IEC :1991) Harmonized system of quality assessment for electronic components. Fixed film resistor networks for use in electronic equipment. Generic specification EPL/40X Superseded by BS EN :2011 BS QC :1992 (IEC :1991) Harmonized system of quality assessment for electronic components. Fixed film resistor networks for use in electronic equipment. Sectional specification for film resistor networks of assessed quality on the basis of the capability approval procedure EPL/40X Superseded by BS EN :2011 BS QC :1992 (IEC :1991) Fixed film resistor networks for use in electronic equipment. Blank detail specification for film resistor networks of assessed quality on the basis of the capability approval procedure. Assessment level E EPL/40X Superseded by BS EN :2011 BS 3TA 13:2009 Specification for forgings of titaniumaluminium-vanadium alloy (tensile strength MPa) (limiting ruling section 150 mm) ACE/61/-/49 Superseded by BS EN 3312:2012 PAS 62:2003 Refrigerated transport. Procedure for determining performance and calculating energy efficiency This document has been withdrawn as the sponsor (AEA) does not want to review/continue the PAS or use it as a seed document for a formal standard BRITISH STANDARDS UNDER REVIEW The following British Standards implement International and/or European Standards which are currently under review to see if they should be confirmed, revised or withdrawn. Comments are welcome and should be sent to Debbie Stead, Head of Committee Service Centre Operations, BSI Head Office, 389 Chiswick High Road, London W4 4AL or via to BSUKoperations.review@bsigroup.com by 31 May, 2012, in order to be considered by the relevant UK Committee. BS :1983 (ISO 4219:1979) Methods for measurement of air pollution. Sampling equipment used for the determination of gaseous sulphur compounds in ambient air EH/2 BS :Method 323E:1997 (ISO :1997) Methods of testing plastics. Mechanical properties. Longitudinal and shear vibration. Wave-propagation method BS I:1986 (ISO 8333:1985) Methods of measurement of liquid flow in open channels. Weirs and flumes. V-shaped broad crested weirs CPI/113/2 BS :1987 (EN :1988, ISO :1985) Statistical methods for determining and verifying stated noise emission values of machinery and equipment. Glossary of terms EH/1 BS :1987 (EN :1988, ISO :1985) Statistical methods for determining and verifying stated noise emission values of machinery and equipment. Method for determining and verifying stated values for individual machines EH/1 BS :1987 (EN :1988, ISO :1985) Statistical methods for determining and verifying stated noise emission values of machinery and equipment. Method for determining and verifying stated values for batches of machines using a simple (transition) method EH/1 BS :1987 (EN :1988, ISO :1985) Statistical methods for determining and verifying stated noise emission values of machinery and equipment. Methods for determining and verifying stated values for batches of machines EH/1 BS :1997 (ISO :1997) Calibration of vibration and shock pick-ups. Accelerometer resonance testing. General methods GME/21/2 BS :1998 (ISO :1997) Consumable accessories for light microscopes. Slides. Specification for materials and quality of finish CPW/172/5 BS :1998 (ISO :1997) Consumable accessories for light microscopes. Cover glasses. Specification for materials and quality of finish CPW/172/5 BS :1998 (ISO 8577:1997) Light microscopes. Specification for spectral filters CPW/172/5 BS :1997 (ISO 11882:1997) Light microscopes. Interfacing connection for 35 mm SLR photo cameras (T-thread adaptation) CPW/172/5 BS :1997 (ISO 11883:1997) Light microscopes. Marking of stereomicroscopes CPW/172/5 BS :1997 (ISO :1997) Metallic materials for surgical implants. Specification for wrought cobalt-nickelchromium-molybdenum alloy CH/150 Update Standards April 2012 Prices may be subject to change. 19

20 British Standards Under Review continued... BS :1997 (ISO :1997) Metallic materials for surgical implants. Specification for wrought cobalt-nickelchromium-molybdenum-tungsten-iron alloy CH/150 BS EN ISO 75-3:2004 Plastics. Determination of temperature of deflection under load. High-strength thermosetting laminates and long-fibrereinforced plastics BS EN ISO :2001 Technical drawings. General principles of presentation. Basic conventions for lines TDW/4 BS EN 233:1999 Wall coverings in roll form. Specification for finished wallpapers, wall vinyls and plastics wall coverings CW/35 BS EN 266:1992 Specification for textile wall coverings CW/35 BS EN ISO 295:2004 Plastics. Compression moulding of test specimens of thermosetting materials BS EN ISO 389-8:2004 Acoustics. Reference zero for the calibration of audiometric equipment. Reference equivalent threshold sound pressure levels for pure tones and circumaural earphones EH/1/1 BS EN ISO 527-4:1997 (BS :Method 326F:1997) Plastics. Determination of tensile properties. Test conditions for isotropic and orthotropic fibre-reinforced plastic composites BS EN ISO 584:1998 Plastics. Unsaturated polyester resins. Determination of reactivity at 80ºC (conventional method) BS EN ISO 604:2003 Plastics. Determination of compressive properties BS EN ISO 846:1997 Plastics. Evaluation of the action of microorganisms BS EN ISO 1110:1998 Plastics. Polyamides. Accelerated conditioning of test specimens BS EN ISO :2004 Plastics. Methods for determining the density of non-cellular plastics. Density gradient column method BS EN :2000 Cryogenic vessels. Transportable vacuum insulated vessels of not more than 1000 litres volume. Fundamental requirements PVE/18 BS EN :2000 Cryogenic vessels. Transportable vacuum insulated vessels of not more than 1000 litres volume. Design, fabrication, inspection and testing PVE/18 BS EN :2000 Cryogenic vessels. Transportable vacuum insulated vessels of not more than 1000 litres volume. Operational requirements PVE/18 BS EN :1998 Cryogenic vessels. Materials. Toughness requirements for temperatures below -80ºC PVE/18 BS EN :2001 Cryogenic vessels. Materials. Toughness requirements for temperatures between -80ºC and -20ºC PVE/18 BS EN 1797:2001 Cryogenic vessels. Gas/material compatibility PVE/18 BS EN ISO 2554:1999 (BS :Method 432C:1997) Plastics. Unsaturated polyester resins. Determination of hydroxyl value BS EN ISO 3167:2003 Plastics. Multipurpose test specimens BS EN ISO 3344:1997 Reinforcement products. Determination of moisture content BS EN ISO 3521:2000 (BS :Method 644A:1997) Plastics. Unsaturated polyester and epoxy resins. Determination of overall volume shrinkage BS EN ISO 3671:1999 (BS :Method 461A:1978) Plastics. Aminoplastic moulding materials. Determination of volatile matter BS EN ISO 4895:2000 Plastics. Liquid epoxy resins. Determination of tendency to crystallize BS EN ISO :1999 Technical drawings. Projection methods. Synopsis TDW/4 BS EN ISO :1999 Technical drawings. Projection methods. Orthographic representations TDW/4 BS EN ISO :1999 Technical drawings. Projection methods. Axonometric representations TDW/4 BS EN ISO :1999 Plastics. Smoke generation. Guidance on optical-density testing PRI/26 BS EN ISO :2008 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Permeation method PTI/15 BS EN ISO 6785:2007 Milk and milk products. Detection of Salmonella spp. AW/9 BS EN ISO 6806:1996 Rubber hoses and hose assemblies for use in oil burners. Specification PRI/66 BS EN ISO 7822:1999 Textile glass reinforced plastics. Determination of void content. Loss on ignition, mechanical disintegration and statistical counting methods BS EN ISO 8032:1999 Rubber and plastics hose assemblies. Flexing combined with hydraulic impulse test (halfomega test) PRI/66/-/4 BS EN ISO 8256:2004 Plastics. Determination of tensile-impact strength BS EN ISO 8974:2002 Plastics. Phenolic resins. Determination of residual phenol content by gas chromatography BS EN ISO :2009 Anaesthetic and respiratory equipment. Heat and moisture exchangers (HMEs) for humidifying respired gases in humans. HMEs for use with minimal tidal volumes of 250 ml CH/121/1 BS EN ISO :2009 Anaesthetic and respiratory equipment. Heat and moisture exchangers (HMEs) for humidifying respired gases in humans. HMEs for use with tracheostomized patients having minimum tidal volumes of 250 ml CH/121/1 BS EN ISO 9396:2001 Plastics. Phenolic resins. Determination of the gel time at a given temperature using automatic apparatus BS EN ISO 9944:1995 (BS :Method 451Q:1995) Plastics. Phenolic resins. Determination of electrical conductivity of resin extracts BS EN ISO 10548:2003 Carbon fibre. Determination of size content BS EN ISO 10618:2004 Carbon fibre. Determination of tensile properties of resin-impregnated yarn 20 Prices may be subject to change. Update Standards April 2012

21 BS EN ISO :2002 Acoustics and vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements. Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion EH/1/4 BS EN ISO 11402:2005 Phenolic, amino and condensation resins. Determination of free-formaldehyde content BS EN ISO :2004 Plastics. Acquisition and presentation of comparable multipoint data. Thermal and processing properties BS EN ISO 11469:2000 Plastics. Generic identification and marking of plastics products PRI/10 BS EN ISO 11667:2000 Fibre reinforced plastics. Moulding compounds and prepregs. Determination of resin, reinforcement-fibre and mineral-filler content. Dissolution methods BS EN :2007+A1:2008 Plastics and rubber machines. Size reduction machines. Safety requirements for blade granulators MCE/3/2 BS EN :2001+A1:2008 Rubber and plastics machines. Size reduction machines. Safety requirements for shredders MCE/3/2 BS EN 12013:2000+A1:2008 Plastics and rubber machines. Internal mixers. Safety requirements MCE/3/2 BS EN ISO :2002 Plastics. Determination of viscosity using a falling-ball viscometer. Inclined-tube method BS EN 12080:2007+A1:2010 Railway applications. Axleboxes. Rolling bearings RAE/3/-/2 BS EN 12081:2007+A1:2010 Railway applications. Axleboxes. Lubricating greases RAE/3/-/2 BS EN 12082:2007+A1:2010 Railway applications. Axleboxes. Performance testing RAE/3/-/2 BS EN ISO 12114:1997 Fibre-reinforced plastics. Thermosetting moulding compounds and prepregs. Determination of cure characteristics BS EN ISO 12115:1997 Fibre-reinforced plastics. Thermosetting moulding compounds and prepregs. Determination of flowability, maturation and shelf life BS EN 12149:1998 Wall coverings in roll form. Determination of migration of heavy metals and certain other elements, of vinyl chloride monomer and of formaldehyde release CW/35 BS EN 12213:1999 Cryogenic vessels. Methods for performance evaluation of thermal insulation PVE/18 BS EN 12300:1999 Cryogenic vessels. Cleanliness for cryogenic service PVE/18 BS EN 12301:2000+A1:2008 Plastics and rubber machines. Calenders. Safety requirements MCE/3/2 BS EN 12434:2000 Cryogenic vessels. Cryogenic flexible hoses PVE/18 BS EN 12956:1999 Wall coverings in roll form. Determination of dimensions, straightness, spongeability and washability CW/35 BS EN 13275:2000 Cryogenic vessels. Pumps for cryogenic service PVE/18 BS EN 13371:2002 Cryogenic vessels. Couplings for cryogenic service PVE/18 BS EN :2002 Cryogenic vessels. Static vacuum insulated vessels. Fundamental requirements PVE/18 BS EN :2002 Cryogenic vessels. Static vacuum insulated vessels. Design, fabrication, inspection and testing PVE/18 BS EN :2003 Cryogenic vessels. Static vacuum insulated vessels. Operational requirements PVE/18 DD ENV :2002 Railway applications. Track. Performance requirements for fastening systems. Special fastening systems for attenuation of vibration RAE/2 BS EN :2006 Railway applications. Track. Performance requirements for fastening systems. Fastening systems for track with heavy axle loads RAE/2 BS EN :2002 Cryogenic vessels. Large transportable vacuum insulated vessels. Design, fabrication, inspection and testing PVE/18 BS EN :2002 Cryogenic vessels. Safety devices for protection against excessive pressure. Bursting disc safety devices for cryogenic service PVE/18 BS EN :2002 Cryogenic vessels. Safety devices for protection against excessive pressure. Determination of required discharge. Capacity and sizing PVE/18 BS EN :2006+A1:2010 Railway applications. Track. Rail. Switch and crossing rails used in conjunction with Vignole railway rails 46 kg/m and above RAE/2 BS EN :2006+A1:2010 Railway applications. Track. Rail. Check rails RAE/2 BS EN :2006+A1:2009 Railway applications. Track. Rail. Vignole railway rails from 27 kg/m to, but excluding 46 kg/m RAE/2 BS EN :2006+A1:2009 Railway applications. Track. Track alignment design parameters. Track gauges 1435 mm and wider. Switches and crossings and comparable alignment design situations with abrupt changes of curvature RAE/2 BS EN :2006 Railway applications. Track. Track geometry quality. Measuring systems. Track recording vehicles RAE/2 BS EN :2003+A2:2011 Railway applications. Wheelsets and bogies. Monobloc wheels. Technical approval procedure. Forged and rolled wheels RAE/3/-/1 BS EN :2006+A1:2010 Railway applications. Aerodynamics. Requirements and test procedures for aerodynamics in tunnels RAE/1/-/4 BS EN ISO 14113:2008 Gas welding equipment. Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) WEE/18 BS EN ISO 14129:1998 Fibre-reinforced plastic composites. Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength by the ± 45º tension test method BS EN ISO 14130:1998 Fibre-reinforced plastic composites. Determination of apparent interlaminar shear strength by short-beam method BS EN :2003 Cryogenic vessels. Static non-vacuum insulated vessels. Fundamental requirements PVE/18 BS EN :2003+A1:2006 Cryogenic vessels. Static non-vacuum insulated vessels. Design, fabrication, inspection and testing PVE/18 Update Standards April 2012 Prices may be subject to change. 21

22 British Standards Under Review continued... BS EN :2003 Cryogenic vessels. Large transportable nonvacuum insulated vessels. Fundamental requirements PVE/18 BS EN :2003+A2:2008 Cryogenic vessels. Large transportable nonvacuum insulated vessels. Design, fabrication, inspection and testing PVE/18 BS EN :2003 Cryogenic vessels. Large transportable nonvacuum insulated vessels. Operational requirements PVE/18 BS EN ISO 14556:2000 Steel. Charpy V-notch pendulum impact test. Instrumented test method ISE/101/4 BS EN ISO 14557:2002+A1:2007 Fire-fighting hoses. Rubber and plastics suction hoses and hose assemblies FSH/17/8 BS EN :2007 Railway applications. Track. Flash butt welding of rails. New R220, R260, R260Mn and R350HT grade rails in a fixed plant RAE/2 BS EN :2006+A1:2010 Railway applications. Track. Aluminothermic welding of rails. Approval of welding processes RAE/2 BS EN :2006 Railway applications. Track. Aluminothermic welding of rails. Qualifications of aluminothermic welders, approval of contractors and acceptance of welds RAE/2 BS EN 14811:2006+A1:2009 Railway applications. Track. Special purpose rail. Grooved and associated construction RAE/2 BS EN 14817:2006 Railway applications. Suspension components. Air-spring control elements RAE/3/-/4 BS EN :2006+A2:2010 Railway applications. Axlebox lubricating greases. Method to test the mechanical stability to cover vehicle speeds up to 200 km/h RAE/3/-/2 BS EN 14969:2006 Railway applications. Track. Qualification system for railway trackwork contractors RAE/2 BS EN 15020:2006+A1:2010 Railway applications. Rescue coupler. Performance requirements, specific interface geometry and test methods RAE/1/-/13 BS EN 15049:2007 Railway applications. Suspension components. Torsion bar, steel RAE/3 BS EN ISO 15783:2003+A1:2008 Seal-less rotodynamic pumps. Class II. Specification MCE/6 BS EN ISO 16664:2008 Gas analysis. Handling of calibration gases and gas mixtures. Guidelines PTI/15 BS EN ISO 17624:2004 Acoustics. Guidelines for noise control in offices and workrooms by means of acoustical screens EH/1/3 BS EN ISO 20200:2005 Plastics. Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test BS ISO :2001 Technical drawings. General principles of presentation. Basic conventions for views TDW/4 BS ISO :2001 Technical drawings. General principles of presentation. Basic conventions for cuts and sections TDW/4 BS ISO :2001 Technical drawings. General principles of presentation. Basic conventions for representing areas on cuts and sections TDW/4 BS ISO :2002 Fibre-reinforced plastics. Methods of producing test plates. Pultrusion moulding BS ISO :2004 Fibre-reinforced plastics. Methods of producing test plates. Compression moulding of SMC and BMC BS ISO 2836:2004 Graphic technology. Prints and printing inks. Assessment of resistance to various agents PAI/43 BS ISO 2929:2002 Rubber hoses and hose assemblies for bulk fuel delivery by truck. Specification PRI/66/-/1 BS ISO 5025:1997 Reinforcement products. Woven fabrics. Determination of width and length BS ISO :1996 Technical drawings. Projection methods. Central projection TDW/4 BS ISO 5833:2002 Implants for surgery. Acrylic resin cements CH/150/1 BS ISO 6658:2005 Sensory analysis. Methodology. General guidance AW/12 BS ISO :1997+A1:2007 Plastics. Determination of dynamic mechanical properties. Tensile vibration. Sonic-pulse propagation method BS ISO :2002 Optics and optical instruments. Medical endoscopes and endoscopic accessories. Particular requirements for rigid bronchoscopes CPW/172/5 BS ISO :1997 Optics and optical instruments. Medical endoscopes and endoscopic accessories. Determination of maximum width of insertion portion CPW/172/5 BS ISO 8660:2002 Plastics. Determination of permanganate absorption number of caprolactam. Spectrometric method BS ISO :2002 Optics and optical instruments. Environmental test methods. Cold, heat and humidity CPW/172 BS ISO :2002 Optics and optical instruments. Environmental test methods. Salt mist CPW/172 BS ISO :1994 Optics and optical instruments. Environmental test methods. Combined cold, low air pressure CPW/172 BS ISO :1994 Optics and optical instruments. Environmental test methods. Combined damp heat and low internal pressure CPW/172 BS ISO :1997 Optics and optical instruments. Environmental test methods. Humid atmosphere containing sulfur dioxide or hydrogen sulfide CPW/172 BS ISO :1998 Optics and optical instruments. Environmental test methods. Combined low pressure and ambient temperature or dry heat CPW/172 BS ISO/IEC :2006 Information technology. Security techniques. Digital signature schemes giving message recovery. Discrete logarithm based mechanisms IST/33 BS ISO :2006 Optics and photonics. Environmental requirements. General overview, terms and definitions, climatic zones and their parameters CPW/172 BS ISO :2005 Optics and photonics. Environmental requirements. Test requirements for medical optical devices CPW/172 BS ISO :2005 Optics and photonics. Environmental requirements. Test requirements for extreme conditions of use CPW/172 BS ISO :2004 Optics and optical instruments. Environmental requirements. Conditions of transport for optical instruments CPW/ Prices may be subject to change. Update Standards April 2012

23 BS ISO :2004 Optics and photonics. Preparation of drawings for optical elements and systems. Table representing data of optical elements and cemented assemblies CPW/172 BS ISO :2004 Optics and optical instruments. Preparation of drawings for optical elements and systems. Laser irradiation damage threshold CPW/172 BS ISO/IEC 10116:2006 Information technology. Security techniques. Modes of operation for an n-bit cipher IST/33 BS ISO 10119:2002 Carbon fibre. Determination of density BS ISO :2009 Fire tests for building elements and components. Fire testing of service installations. Linear joint (gap) seals FSH/22 BS ISO :2002 Optics and optical instruments. Vocabulary for microscopy. Light microscopy CPW/172/5 BS ISO :2002 Plastics. Thermomechanical analysis (TMA). Determination of penetration temperature BS ISO 11421:1997 Optics and optical instruments. Accuracy of optical transfer function (OTF) measurement CPW/172 BS ISO/IEC :2006 Information technology. Security techniques. Key management. Mechanisms based on weak secrets IST/33 BS ISO 12639:2004 Graphic technology. Prepress digital data exchange. Tag image file format for image technology (TIFF/IT) PAI/43 BS ISO :2004 Graphic technology. Prepress digital data exchange. XYZ/sRGB encoded standard colour image data (XYZ/SCID) PAI/43 BS ISO :2007 Graphic technology. Process control for the production of half-tone colour separations, proof and production prints. Proofing processes working directly from digital data PAI/43 BS ISO 13363:2004 Rubber and plastics hoses for marine-engine wet-exhaust systems. Specification PRI/66 BS ISO :2002 Acoustics. Measurement of sound absorption properties of road surfaces in situ. Extended surface method EH/1/2 BS ISO 13752:1998 Air quality. Assessment of uncertainty of a measurement method under field conditions using a second method as reference EH/2/4 BS ISO 14856:2001 Timekeeping instruments. Wristwatch cases. Fixing dimensions of non-spring-bar types STI/53 BS ISO 14897:2002 Plastics. Polyols for use in the production of polyurethane. Determination of water content BS ISO 15314:2004 Plastics. Methods for marine exposure BS ISO 15790:2004 Graphic technology and photography. Certified reference materials for reflection and transmission metrology. Documentation and procedures for use, including determination of combined standard uncertainty PAI/43 BS ISO 15795:2002 Optics and photonics. Quality evaluation of optical systems. Assessing the image quality degradation due to chromatic aberrations CPW/172 BS ISO 15985:2004 Plastics. Determination of the ultimate anaerobic biodegradation and disintegration under high-solids anaerobic-digestion conditions. Method by analysis of released biogas BS ISO :2002 Methods for the calibration of vibration and shock transducers. Primary vibration calibration by the reciprocity method GME/21/2 BS ISO 16700:2004 Microbeam analysis. Scanning electron microscopy. Guidelines for calibrating image magnification CII/9 BS ISO 16929:2002 Plastics. Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test BS EN ISO/IEC 17021:2011 Conformity assessment. Requirements for bodies providing audit and certification of management systems CAS/1 BS ISO 17281:2002 Plastics. Determination of fracture toughness (G ic and K ic ) at moderately high loading rates (1 m/s) BS ISO 17710:2002 Plastics. Polyols for use in the production of polyurethane. Determination of degree of unsaturation by microtitration BS ISO 17744:2004 Plastics. Determination of specific volume as a function of temperature and pressure (pvt diagram). Piston apparatus method BS ISO/IEC :2006 Information technology. Security techniques. Encryption algorithms. Asymmetric ciphers IST/33 BS ISO/IEC :2007 Information technology. Biometric application programming interface. Biometric archive function provider interface IST/44 BS ISO/IEC :2006 Information technology. Biometric performance testing and reporting. Testing methodologies for technology and scenario evaluation IST/44 DD CEN ISO/TS 20836:2005 Microbiology of food and animal feeding stuffs. Polymerase chain reaction (PCR) for the detection of food-borne pathogens. Performance testing of thermal cyclers AW/9 BS ISO/IEC 23988:2007 Information technology. A code of practice for the use of information technology (IT) in the delivery of assessments IST/43 BS ISO/IEC :2007 Information technology. Conformance testing for the biometric application programming interface (BioAPI). Methods and procedures IST/44 BS ISO/IEC :2007 Information technology. Conformance testing for the biometric application programming interface (BioAPI). Test assertions for biometric service providers IST/44 PD ISO/IEC TR 24722:2007 Information technology. Biometrics. Multimodal and other multibiometric fusion IST/44 BS ISO/IEC 24744:2007+A1:2010 Software Engineering. Metamodel for Development Methodologies IST/15 BS ISO/IEC 25001:2007 Software engineering. Software product quality requirements and evaluation (SQuaRE). Planning and management IST/15 NEW WORK STARTED The reference number of the committee responsible for each item of new work started is given after each entry. Where a work item has the temporary designation BS EN XXXX, it has not yet been allocated a standard number by the European standards body. BS Testing concrete. Methods for testing cement in a reference concrete will supersede BS :1998 B/517/1 Update Standards April 2012 Prices may be subject to change. 23

24 New Work Started continued... BS 3969 Recommendations for turf for general purposes will supersede BS 3969:1998 AW/20 BS Safety signs, including fire safety signs. Code of practice for escape route signing will supersede BS :2000 PH/8/1 BS Safety signs, including fire safety signs. Code of practice for the use of safety signs, including fire safety signs will supersede BS :2006 PH/8/1 BS :1978/A1 Sills and copings. Specification for window sills of precast concrete, cast stone, clayware, slate and natural stone B/519/3 BS :1983/A1 Sills and copings. Specification for copings of precast concrete, cast stone, clayware, slate and natural stone B/519/3 BS :2002+A2:2008/A3 Fire detection and fire alarm systems for buildings. Code of practice for system design, installation, commissioning and maintenance FSH/12/1 BS :2004/A1 Fire detection and fire alarm systems for buildings. Code of practice for the design, installation and maintenance of fire detection and fire alarm systems in dwellings FSH/12/1 BS 8515:2009/A1 Rainwater harvesting systems. Code of practice CB/506 BS 8589 Restraining devices for children in motor vehicles. Specifications for side impact performance AUE/7 PD :2008/A1 Recommendations for the design of bridges to BS EN 1993 B/525/10 EN Lighting columns. Design and verification. Specification for characteristic loads will supersede BS EN :2000 B/509/50 EN Lighting columns. Design and verification. Verification by testing will supersede BS EN :2000 B/509/50 EN Lighting columns. Design and verification. Verification by calculation will supersede BS EN :2003 B/509/50 EN 71-7 Safety of toys. Finger paints. Requirements and test methods will supersede BS EN 71-7:2002 CW/15 EN WI Protective clothing. Body armour. General requirements PH/3/5 EN WI Protective clothing. Body armour. Bullet resistance. Requirements and test methods PH/3/5 EN WI Protective clothing. Body armour. Knife and spike resistance. Requirements and test methods PH/3/5 EN WI Railway applications. Ballastless track systems. General requirements RAE/2 EN Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems. System S; dimensions will supersede BS EN :2007 B/505 EN ISO Connections for general use and fluid power. Ports and stud ends with ISO threads with elastomeric or metal-to-metal sealing. Threaded ports will supersede BS EN ISO :2008 ISE/110 EN ISO Connections for general use and fluid power. Ports and stud ends with ISO threads with elastomeric or metal-to-metal sealing. Heavyduty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) will supersede BS EN ISO :2008 ISE/110 EN Gullies for buildings. Requirements will supersede BS EN :2003 B/505/11 EN Gullies for buildings. Test methods will supersede BS EN :2003 B/505/11 EN :2010/A1 Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE). Fittings PRI/88/2 CEN/TS Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE). Guidance for the assessment of conformity will supersede DD CEN/TS :2003 PRI/88/2 EN ISO Non-destructive testing. Penetrant testing. Testing of penetrant materials will supersede BS EN ISO :2006 WEE/46 EN ISO Non-destructive testing. Penetrant testing. Reference test blocks will supersede BS EN ISO :1999 WEE/46 EN ISO Cycles. Safety requirements for bicycles. Requirements for city and trekking, young adult, mountain and racing bicycles will partially supersede BS EN 14764:2005, BS EN 14766:2005 and BS EN 14781:2005 GME/25 EN ISO Cycles. Safety requirements for bicycles. Common test methods will partially supersede BS EN 14764:2005, BS EN 14766:2005 and BS EN 14781:2005 GME/25 EN ISO Cycles. Safety requirements for bicycles. Braking test methods will partially supersede BS EN 14764:2005, BS EN 14766:2005 and BS EN 14781:2005 GME/25 EN ISO Cycles. Safety requirements for bicycles. Steering test methods will partially supersede BS EN 14764:2005, BS EN 14766:2005 and BS EN 14781:2005 GME/25 EN ISO Cycles. Safety requirements for bicycles. Frame and fork test methods will partially supersede BS EN 14764:2005, BS EN 14766:2005 and BS EN 14781:2005 GME/25 EN ISO Cycles. Safety requirements for bicycles. Wheels and rims test methods will partially supersede BS EN 14764:2005, BS EN 14766:2005 and BS EN 14781:2005 GME/25 EN ISO Cycles. Safety requirements for bicycles. Pedals and crank test methods will partially supersede BS EN 14764:2005, BS EN 14766:2005 and BS EN 14781:2005 GME/25 EN ISO Cycles. Safety requirements for bicycles. Saddles and seat-post test methods will partially supersede BS EN 14764:2005, BS EN 14766:2005 and BS EN 14781:2005 GME/25 EN ISO 9453 Soft solder alloys. Chemical compositions and forms will supersede BS EN ISO 9453:2006 NFE/27/4 24 Prices may be subject to change. Update Standards April 2012

25 EN ISO Soil quality. Determination of the effects of pollutants on soil flora. Method for the measurement of inhibition of root growth will supersede BS ISO :2012 EH/4 EN :2011/A1 Plastics piping systems for water supply, and for drainage and sewerage under pressure. Polyethylene (PE). Pipes PRI/88/2 EN :2011/A1 Plastic piping systems for water supply. Polyethylene (PE). Pipes PRI/88/2 EN Food processing machinery. Band saw machines. Safety and hygiene requirements will supersede BS EN 12268:2003+A1:2010 MCE/3/5 EN Workshop fabricated steel tanks. Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and non-flammable water polluting liquids will supersede BS EN :2003 PVE/15 EN Air quality. Determination of the PM10 fraction of suspended particulate matter. Reference method and field test procedure to demonstrate reference equivalence of measurement methods will supersede BS EN 12341:1999 EH/2/1 EN Safety requirements for cableway installations designed to carry persons. Operation will supersede BS EN 12397:2004 MCE/20 EN Food processing machinery. Filling machines and auxiliary machines. Safety and hygiene requirements will supersede BS EN 12463:2004+A1:2011 MCE/3/5 EN Bituminous mixtures. Test methods for hot mix asphalt. Amount of coarse foreign matter in reclaimed asphalt will supersede BS EN :2005 B/510/1 EN Safety of woodworking machines. Four-sided moulding machines will supersede BS EN 12750:2001+A1:2009 MTE/23 EN Small steam sterilizers will supersede BS EN 13060:2004+A2:2010 LBI/35 EN 13120:2009/A1 Internal blinds. Performance requirements including safety B/538 EN Metallic industrial piping. Additional requirements for aluminium and aluminium alloy piping will supersede BS EN :2007 PVE/10 EN Safety requirements for cableway installations designed to carry persons. Carriers. Grips, carrier trucks, on-board brakes, cabins, chairs, carriages, maintenance carriers, tow-hangers will supersede BS EN :2005 MCE/20 EN Safety requirements for cableway installations designed to carry persons. Carriers. Slipping resistance tests for grips will supersede BS EN :2005 MCE/20 EN Safety requirements for cableway installations designed to carry persons. Carriers. Fatigue tests will supersede BS EN :2005 MCE/20 EN Food processing machinery. Cubes cutting machinery. Safety and hygiene requirements will supersede BS EN 13871:2005+A1:2010 MCE/3/5 EN Timber stairs. Terminology will supersede BS EN 14076:2004 B/543 EN Surgical masks. Requirements and test methods will supersede BS EN 14683:2005 CH/205/1 CEN/TR Durability of wood and wood-based products. Criteria for hot air processes for curative uses against wood destroying organisms will supersede PD CEN/TS 15003:2005 B/515 EN Sanitary tapware. Electronic opening and closing sanitary tapware will supersede BS EN 15091:2006 B/504 EN Food processing machinery. Forming machines. Safety and hygiene requirements MCE/3/5 EN Tanks for transport of dangerous goods. Plug/socket connection and supply characteristics for service equipment in hazardous areas with 24 V nominal supply voltage will supersede BS EN 15207:2006 AUE/18 EN Tanks for transport of dangerous goods. Sealed parcel delivery systems. Working principles and interface specifications will supersede BS EN 15208:2007 AUE/18 EN Slow heat release appliances fired by solid fuel. Requirements and test methods will supersede BS EN 15250:2007 RHE/28 EN Sweepers. Performance requirements and test methods B/513 CEN/TS Identification card systems. European Citizen Card. Physical, electrical and transport protocol characteristics will supersede DD CEN/TS :2007 IST/17 EN 15503:2009/A1 Garden equipment. Garden blowers, vacuums and blower/vacuums. Safety AGE/6 CEN/TR Analytical method for the analysis of propiconazole in treated wood samples B/515 EN Influence of materials on water for human consumption. Enhancement of microbial growth (EMG) EH/6 CEN/TS Characterization of waste. Screening method for the elemental composition by portable X- ray fluorescence instruments B/508/3 EN Simple publishing interface IST/43 EN Simple query interface IST/43 CEN/TR Intelligent transport systems. Public transport. Traveller information for visually impaired people (TI-VIP) EPL/278 CEN/TS Personal identification. Harmonization and interoperability of slap-ten print capture for biometrics IST/17 EN Internal blinds. Protection from strangulation hazards. Test methods B/538 EN Internal blinds. Protection from strangulation hazards. Requirements and test methods for safety devices B/538 CEN/TR Oxygenates blending in line with actual EN 228 requirements PTI/2 Update Standards April 2012 Prices may be subject to change. 25

26 New Work Started continued... EN ISO Non-interchangeable screw-threaded (NIST) low-pressure connectors for medical gases CH/121/6 EN ISO/IEC Information technology. Learning, education and training. Metadata for learning resources. Framework IST/43 EN ISO/IEC Information technology. Learning, education and training. Metadata for learning resources. Dublin Core elements IST/43 EN ISO Vitreous and porcelain enamels. Glass-lined apparatus for process plants. Quality requirements for glass-lined flanged steel pipes and flanged steel fittings will supersede BS ISO :2010 STI/36 EN Cable networks for television signals, sound signals and interactive services. Electromagnetic compatibility for networks will supersede BS EN :2002+A11:2008 EPL/100/4 EN Hand crimping tools. Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications. Particular requirements. Radio frequency connectors and concentric contacts. Open throat tools with removable and interchangeable dies, sizes A to G, Q to T, V and W will supersede BS EN :1996 EPL/46 EN Operation of electrical installations will supersede BS EN :2004 PEL/99 CLC/TS Alarm systems. Intrusion and hold-up systems. Intrusion detectors. Active infrared detectors GW/1 CLC/TS X Alarm systems. Intrusion and hold-up systems. Lock state contacts (magnetic) GW/1 CLC/TS X Alarm systems. Intrusion and hold-up systems. Bolt contacts. Requirements for bolt contacts monitoring the lock status of doors GW/1 CLC/TS Alarm systems. Intrusion and hold-up systems. Requirements for wired interconnection for I&HAS equipments located in supervised premises GW/1 EN Alarm systems. Intrusion systems. Requirements for interconnections equipment using radio frequency techniques will supersede BS EN :2005+A1:2008 GW/1 EN X Alarm systems. Intrusion and hold-up systems. Junction boxes GW/1 CLC/TS Alarm systems. Intrusion and hold-up systems. Hold-up devices GW/1 EN Alarm systems. Social alarm systems. Trigger devices will supersede BS EN :2000 GW/1 EN Alarm systems. Social alarm systems. Application guidelines will supersede DD CLC/TS :2003 GW/1 EN Alarm systems. Alarm transmission systems and equipment. Annunciation equipment used in alarm receiving centres will supersede DD CLC/TS :2004 GW/1 CLC/TS Alarm systems. Alarm transmission systems and equipment. Requirements for common protocol for alarm transmission using the internet protocol GW/1 EN Electrical equipment for furnaces and ancillary equipment. Requirements for application design and installation will supersede BS EN :2004 PEL/27 EN Installation technology. Cabling installation. Installation planning and practices outside buildings will supersede BS EN :2003 ICT/-/1 EN Electromagnetic compatibility. Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen will supersede BS EN 50270:2006 EXL/31/1 EN Multi-element metallic cables used in analogue and digital communication and control. Sectional specification for screened cables characterised up to 1000 MHz. Work area and patch cord cables EPL/46 EN Multi-element metallic cables used in analogue and digital communication and control. Sectional specification for screened cables characterized up to 500 MHz. Work area and patch cord cables EPL/46 EN :2010/A1 Electrical apparatus for the detection of carbon monoxide in domestic premises. Test methods and performance requirements EXL/31/1 EN 50304:2009+A1:2010/A2 Electric cooking ranges, hobs, ovens and grills for household use. Methods for measuring performance CPL/59 EN Overhead electrical lines exceeding A.C. 45 kv. General requirements. Common specifications will supersede BS EN :2001+A1:2009 PEL/11 EN Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. Type LC-PC duplex terminated on IEC category A1a and A1b multimode fibre will supersede BS EN :2004 GEL/86/1 EN Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. LC-PC duplex terminated on IEC category B1.1 singlemode fibre will supersede BS EN :2004 GEL/86/1 EN Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. Type LC-APC duplex terminated on IEC category B1.1 singlemode fibre will supersede BS EN :2004 GEL/86/1 EN Electrical apparatus for the detection and measurement of combustible or toxic gases or vapours or of oxygen. Requirements on the functional safety of fixed gas detection systems will supersede BS EN 50402:2005+A1:2008 EXL/31/1 EN X End user multi-pair cables used in high bit rate telecommunication networks. Indoor multipair/quad cables for installation in multi dwelling units supporting universal services, xdsl and applications up to 100 Mbits over IP. Definitions and requirements EPL/46 CLC/TR Guide for the application of the European Standard EN will supersede PD CLC/TR 50422:2003 GEL/8 EN Alcohol interlocks. Test methods and performance requirements. Instruments for drink-driving-offender programs will supersede BS EN :2005 AUE/16 EN Alcohol interlocks. Test methods and performance requirements. Instruments having a mouthpiece and measuring breath alcohol for general preventive use will supersede BS EN :2007 AUE/16 26 Prices may be subject to change. Update Standards April 2012

27 CLC/TR Fibre optic access to end-user. A guideline to building of FTTX fibre optic network will supersede PD CLC/TR 50510:2007 GEL/86/1 EN Monitoring and alarm receiving centre. Location and construction requirements will supersede BS EN :2010 GW/1 EN Monitoring and alarm receiving centre. Technical requirements will supersede BS EN :2010 GW/1 EN Monitoring and alarm receiving centre. Procedures and requirements for operation will supersede BS EN :2011 GW/1 EN 50521:2008/A1 Connectors for photovoltaic systems. Safety requirements and tests GEL/82 CLC/TR Alarm systems. Terms and definitions will supersede PD CLC/TR 50531:2009 GW/1 EN Three phase dry-type distribution transformers 50 Hz, from 100 to 3150 kva, with highest voltage for equipment not exceeding 36 kv. Determination of the power rating of a transformer loaded with non-sinusoidal current PEL/14 EN Electrical insulating materials. Determination of the effects of ionizing radiation. Radiation interaction and dosimetry will supersede BS EN :1995 GEL/112 EN Power line telecommunications modems. Radio disturbance characteristics. Limits and methods of measurement. Modems for access networks GEL/210/11 CLC/TR Electricity metering equipment. Severity levels, immunity requirements and test methods for conducted disturbances in the frequency range khz PEL/13 CLC/TR 50XXX Description of the current and expected future electromagnetic environment and identification of the relevant immunity tests GEL/210 EN 55011:2009+A1:2010/AMD Industrial, scientific and medical equipment. Radio-frequency disturbance characteristics. Limits and methods of measurement GEL/210/11 EN :2009/A1 Electromagnetic compatibility. Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use. Emissions GEL/210/11 EN Electrical installation in ships. Tankers. Special features will supersede BS IEC :1999 JPEL/18 EN :2011/A1 Low-voltage fuses. Supplementary requirements for fuse-links for the protection of solar photovoltaic energy systems PEL/32 EN Fixed capacitors for use in electronic equipment. Sectional specification. Fixed metallized polyphenylene sulfide film dielectric surface mount D.C. capacitors will supersede BS EN :2008 EPL/40X EN Fixed capacitors for use in electronic equipment. Sectional specification. Surface mount fixed tantalum electrolytic capacitors with conductive polymer solid electrolyte will supersede BS EN :2006 EPL/40X EN Fixed capacitors for use in electronic equipment. Sectional specification. Surface mount fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte will supersede BS EN :2006 EPL/40X EN Luminaires. Particular requirements. Handlamps will supersede BS EN :1997+A2:2008 CPL/34/4 EN Non-cellulosic papers for electrical purposes. Definitions and general requirements will supersede BS EN :1996 GEL/15 EN Radiation protection instrumentation. Ambient and/or directional dose equivalent (rate) meters and/or monitors for beta, X and gamma radiation will supersede BS EN 60846:2004 NCE/2 EN Telecontrol equipment and systems. Telecontrol protocols compatible with ISOstandards and ITU-T recommendations. TASE.2 Services and protocol will supersede BS EN :2002 PEL/57 EN Telecontrol equipment and systems. Telecontrol protocols compatible with ISOstandards and ITU-T recommendations. Functional profile for providing the TASE.2 application service in end systems will supersede BS EN :1999 PEL/57 EN Telecontrol equipment and systems. Telecontrol protocols compatible with ISOstandards and ITU-T recommendations. TASE.2 Object models will supersede BS EN :2002 PEL/57 EN Optical amplifiers. Test methods. Noise figure parameters. Signal power to total ASE power ratio GEL/86/3 EN Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Torque strength of coupling mechanism will supersede BS EN :2008 GEL/86/2 EN Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Static side load for connectors will supersede BS EN :2005 GEL/86/2 EN Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Flexing of the strain relief of fibre optic devices will supersede BS EN :2008 GEL/86/2 EN Function blocks. Architecture will supersede BS EN :2005 GEL/65 EN Fibre optic connector interfaces. General and guidance will supersede BS EN :1997 GEL/86/2 EN Low-voltage switchgear and controlgear. Controller-device interfaces (CDIs). DeviceNet will supersede BS EN :2009 PEL/17/2 EN Fibre optic interconnecting devices and passive components. Fibre optic WDM devices. Generic specification will supersede BS EN :2009 GEL/86/2 EN Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Body from Wireless Communications Devices, 30 MHz-6 GHz. General requirements for using the Finite- Difference Time-Domain (FDTD) Method for SAR Calculations GEL/106 EN Specific Absorption Rate (SAR) in the Human Body from Wireless Communications Devices: Specific requirements for Finite Difference Time Domain (FDTD) Modelling of Exposure from Vehicle Mounted Antennas GEL/106 Update Standards April 2012 Prices may be subject to change. 27

28 New Work Started continued... EN Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Body from Wireless Communications Devices, 30 MHz-6 GHz. Specific requirements for using the Finite- Difference Time-Domain (FDTD) Method for SAR Calculations of Mobile Phones GEL/106 EN 62233:2008/A1 Measurement methods for electromagnetic fields of household appliances and similar apparatus with regard to human exposure CPL/61/8 EN Hydroelectric power plant automation. Guide for computer-based control will supersede BS EN 62270:2004 MCE/15 EN :2010/A1 Fuel cell technologies. Micro fuel cell power systems. Safety GEL/105 EN Fixed electric double-layer capacitors for use in electronic equipment. Generic specification will supersede BS EN :2006 EPL/40X EN Safety requirements for power semiconductor converter systems. Power electronic converters from 1000 V A.C. or 1500 V D.C. up to 35 kv PEL/22 EN Text-to-Speech for television. General requirements EPL/100 EN Field device integration. Overview AMT/7 EN Field device integration. FDI client AMT/7 EN Field device integration. FDI server AMT/7 EN Field device integration. FDI packages AMT/7 EN Field device integration. FDI information model AMT/7 EN Field device integration. Technology mapping AMT/7 EN Field device integration. Communication devices AMT/7 EN Harmonized system of quality assessment for electronic components. Blank detail specification: fixed low power wire wound surface mounting (SMD) resistors will supersede BS EN :1998 EPL/40X EN Detail specification. Fixed low power wirewound surface mount (SMD) resistors. Rectangular. Stability classes 0,5; 1; 2 will supersede BS EN :2005 EPL/40X CEN/TS TC 264 N1626 Stationary source emissions. Sampling and determination of hydrogen chloride content in ducts and stacks. Infra red analytical technique EH/2/1 CEN/TS TC 264 N1754 Ambient air. Automated continuous systems for the measurement of the concentration of particulate matter (PM 10; PM 2,5) EH/2/1 ISO Assembly tools for screws and nuts. Technical specifications. Hand-operated wrenches and sockets MTE/15 ISO Assembly tools for screws and nuts. Technical specifications. Machine-operated sockets (impact) MTE/15 ISO 4261 Petroleum products. Fuels (class F). Specifications of gas turbine fuels for industrial and marine applications PTI/7 ISO Water quality. Sampling. Guidance on quality assurance of environmental water sampling and handling will supersede BS :1998 EH/3/6 ISO :2008/A1 Wheelchairs. Wheeled mobility devices for use as seats in motor vehicles CH/173/1 ISO Road vehicles. Electrical disturbances from conduction and coupling. Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines will supersede BS ISO :2007 AUE/16 ISO 9162 Petroleum products. Fuels (class F). Liquefied petroleum gases. Specifications PTI/7 ISO 9660:1988/A1 Specification for volume and file structure of compact read only optical disks (CD-ROM) for information interchange ICT/-/1 ISO 10100:2001/A1 Hydraulic fluid power. Cylinders. Acceptance tests MCE/18/-/3 ISO Technical systems and aids for disabled or handicapped persons. Wheelchair tiedown and occupant-restraint systems. Requirements and test methods for all systems will supersede BS ISO :2001 CH/173/1 ISO/TS Health informatics. Medical waveform format. Encoding rules IST/35 ISO/IEC Information technology. Office equipment. Minimum information to be included in specification sheets. Printers. Class 3 and Class 4 printers IST/3 ISO/IEC Information technology. Metadata registries (MDR). Naming and identification principles IST/40 ISO Road vehicles. Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy. Off-vehicle radiation sources AUE/16 ISO Road vehicles. Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy. On-board transmitter simulation will supersede BS ISO :2007 AUE/16 ISO Road vehicles. Component test methods for electrical disturbances from narrowband radiated electromagnetic energy. General principles and terminology AUE/16 ISO Road vehicles. Component test methods for electrical disturbances from narrowband radiated electromagnetic energy. Immunity to magnetic fields will supersede BS ISO :2007 AUE/16 ISO Protective clothing for firefighters. Laboratory test methods and performance requirements. Gloves PH/14 ISO Tractors and machinery for agriculture and forestry. Serial control and communications data network. Virtual terminal will supersede BS ISO :2010 AGE/6 ISO Tractors and machinery for agriculture and forestry. Serial control and communications data network. Task controller and management information system data interchange will supersede BS ISO :2009 AGE/6 ISO Road vehicles. Controller area network (CAN). High-speed medium access unit with selective wake-up functionality AUE/16 28 Prices may be subject to change. Update Standards April 2012

29 ISO Hydraulic fluid power. On-line automatic particle-counting systems for liquids. Methods of calibration and validation will supersede BS ISO 11943:1999 MCE/18/-/6 ISO Timber structures. Determination of characteristic values. Basic requirements B/518 ISO Timber structures. Determination of characteristic values. Requirements for sawn timber B/518 ISO/TS Petroleum, petrochemical and natural gas industries. Reliability modelling and calculation of safety systems PSE/17 ISO Acoustics. Soundscape. Definition and conceptual framework EH/1/3 ISO Dentistry. Periodontal curettes, dental scalers and excavators. Jacquette scalers CH/106/4 ISO Paper and board. Determination of contact angle PAI/11 ISO Ships and marine technology. Large yachts. Structural fire protection for FRP yachts SME/32/-/12 ISO Petroleum and natural gas industries. Cathodic protection of pipeline transportation systems. On-land pipelines PSE/17/2 ISO Definition of the Technology Readiness Levels (TRL) and their criteria of assessment ACE/68/-/5 ISO/TR Impact of changes in ISOfluid power particle counting. Contamination control and filter test standards will supersede BS ISO/TR 16386:1999 MCE/18/-/6 ISO Respiratory protective devices. Methods of test and test equipment. Test equipment. Breathing machine, simulator, dummy heads and torso, tools PH/4/11 ISO Respiratory protective devices. Methods of test and test equipment. Climatic conditioning PH/4/11 ISO Respiratory protective devices. Methods of test and test equipment. Leak test methods PH/4/11 ISO Resilient floor coverings. Specification for rubber floor covering. Tile/Plank PRI/3/60 ISO Respiratory protective devices. Human factors. Metabolic rates and respiratory flow rates will supersede DD ISO/TS :2007 PH/4/11 ISO/TR Respiratory protective devices. Human factors. Anthropometrics will supersede DD ISO/TS :2010 PH/6 ISO Cranes. Safety. Load lifting attachments MHE/3/3 ISO Anaesthetic and respiratory equipment. Respiratory therapy tubing and connectors CH/121/5 ISO/IEC Information technology. User interfaces. Guidelines on navigation methods for ladder menus with 4-direction devices ICT/-/6 ISO Textiles. Determination of the banned/restricted flame retardants TCI/80 ISO/TS Microbiology of food and animal feed. Polymerase chain reaction (PCR) for the detection of food-borne pathogens. Detection of botulinum neurotoxin type A, B, E and F producing clostridia AW/9 ISO Dentistry. Osteotomy CH/106 ISO Fine ceramics (advanced ceramics, advanced technical ceramics). Methods for chemical analysis of boron nitride powders RPI/13 ISO Materials resistant to sulfide stress cracking in corrosive petroleum refining environments PSE/17 ISO Fine ceramics (advanced ceramics, advanced technical ceramics). Methods for chemical analysis of fine silicon nitride powders RPI/13 ISO Photography. Digital cameras. Shading measurements CPW/42 ISO Hydraulic fluid power. Cleanliness of parts and components. Inspection document and principles related to contaminant collection, analysis and data reporting will supersede BS ISO 18413:2002 MCE/18/-/6 ISO/IEC Information technology. Metamodel framework for interoperability (MFI). MFI core model and basic mapping IST/40 ISO/IEC Information technology. Metamodel framework for interoperability (MFI). Metamodel for information model registration IST/40 ISO/IEC :2004/A1 Information technology. Computer graphics and image processing. Extensible 3D (X3D). Scene Access Interface (SAI) IST/31 ISO/IEC Information technology. Biometric application programming interface. BioAPI specification will supersede BS ISO/IEC :2006+A3:2010 IST/44 ISO/IEC :2011/A2 Information technology. Biometric data interchange formats. Finger minutiae data IST/44 ISO/IEC :2011/A2 Information technology. Biometric data interchange formats. Finger image data IST/44 ISO/IEC :2011/A1 Information technology. Biometric data interchange formats. Face image data IST/44 ISO/IEC :2011/A2 Information technology. Biometric data interchange formats. Face image data IST/44 ISO/IEC :2007/A1 Information technology. Biometric data interchange formats. Signature/sign time series data IST/44 ISO/IEC :2011/A1 Information technology. Biometric data interchange formats. Finger pattern skeletal data IST/44 ISO/IEC :2011/A2 Information technology. Biometric data interchange formats. Vascular image data IST/44 ISO/IEC :2006/A1 Information technology. Biometric performance testing and reporting. Testing methodologies for technology and scenario evaluation IST/44 Update Standards April 2012 Prices may be subject to change. 29

30 New Work Started continued... ISO/IEC TR Information technology. Service management. Exemplar implementation plan for ISO/IEC will supersede PD ISO/IEC TR :2010 IST/15 ISO/IEC TR Information technology. Service management. Concepts and terminology IST/15 ISO/TS Prerequisite programmes on food safety. Transport and storage AW/90 ISO/TS Prerequisite programmes on food safety. Food packaging manufacturing AW/90 ISO/TS Lifts (elevators), escalators and moving walks. Programmable electronic systems in safety related applications. Maintenance repair and retro fit activities (PESSRAL & PESSRAE) MHE/4 ISO Societal security. Public private partnership. Guidelines to set up partnership agreements SSM/1 ISO Safety and control devices for gas burners and gas-burning appliances. Particular requirements. Manual gas valves GSE/22 ISO/IEC Information technology. User interfaces. Universal remote console. Framework ICT/-/6 ISO/IEC Information technology. User interfaces. Universal remote console. Target description ICT/-/6 ISO/IEC Information technology. User interfaces. Universal remote console. Resource description ICT/-/6 ISO/IEC Guidance on assuring suitability and adequacy of investigation methods IST/33/-/4 ISO/IEC Guidelines for the analysis and interpretation of digital evidence IST/33/-/4 ISO/IEC Investigation principles and processes IST/33/-/4 ISO 27186:2010/A1 Active implantable medical devices. Four-pole connector system for implantable cardiac rhythm management devices. Dimensional and test requirements CH/150 ISO/IEC 29164:2011/A1 Information technology. Biometrics. Embedded BioAPI IST/44 ISO/IEC Guidance on the inclusive design and operation of biometric systems IST/44 ISO/IEC TR Passenger processes for biometric recognition in automated border crossing systems IST/44 ISO/IEC Biometric sample quality standard. Iris image IST/44 ISO/IEC Biometric identity assurance service (BIAS) IST/44 ISO/IEC Systems and software engineering. IT audit IST/15 ISO/IEC TR Software engineering. Lifecycle profiles for Very Small Entities (VSEs) IST/15 IEC :2003/A1 Electrical installations in ships. Special features. Ships carrying specific dangerous goods and materials hazardous only in bulk JPEL/18 ISO/IEC Crystalline silicon photovoltaic (PV) array. Onsite measurement of I-V characteristics will supersede BS EN 61829:1998 GEL/82 IEC Mobile and fixed offshore units. Electrical installations. Installation will supersede BS IEC :2007 JPEL/18 IEC/TS General lighting. LEDs and LED modules. Terms and definitions will supersede DD IEC/TS 62504:2011 CPL/34 IEC/TR Fibre optic interconecting devices and passive components. Reliability. Guideline on high power reliability for passive optical components GEL/86/2 ISO/IEC Information technology. Guidelines for the application of ISO 9001:2000 to IT service management IST/15 DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT NATIONAL BRITISH STANDARDS You may now comment on any National British Standard online. BSI British Standards has launched a Draft Review system which allows access to the drafts of all National British Standards. To enhance access of Drafts for Public Comment for the wider community, make comments more visible and move into collaborative working practices, you will now be able to comment on any National British Standard by visiting All you need to do is register. This service is free of charge. Please note that the only standards available on this service are pure British Standards (National Standards e.g: BS XXXX). European and international documents are not included at this time. Deadlines for receipt of comments on each of the individual drafts can be found at The deadline for the following drafts is 31 May, 2012 unless otherwise stated. Should you wish to receive these drafts in hard copy format, they are available for a fee from BSI Customer Services (see How to order on page 2). 12/ DC BS Fire extinguishing installations and equipment on premises. Selection and positioning of portable fire extinguishers. Code of practice FSH/2 12/ DC BS Code of practice for oil firing. Space heating, hot water and steam supply services for commercial and industrial premises RHE/13 12/ DC BS 8552 Sampling and monitoring of water from building services closed systems. Code of practice EH/3/6 12/ DC BS Library objects for architecture, engineering and construction. Shape and measurement. Code of practice B/555 12/ DC BS Library objects for architecture, engineering and construction. Attributes for specification and assessment. Code of practice B/555 12/ DC BS Specification for Parkour equipment SW/65 30 Prices may be subject to change. Update Standards April 2012

31 12/ DC BS 7211 Electric cables. Thermosetting insulated, non-armoured cables for voltages up to and including 450/750 V for electric power and lighting and having low emission of smoke and corrosive gases when affected by fire GEL/20/17 12/ DC BS 6004 Electric cables. PVC insulated, nonarmoured cables for voltages up to and including 300/500 V, for electric power and lighting GEL/20/17 12/ DC BS A A6 Specification for British Association (B.A.) low tensile screws and nuts for aeronautical purposes ACE/12 12/ DC BS SP 119 and 120 A2 High tensile steel fork joints (unified threads). For aircraft ACE/12 12/ DC BS SP A4 Specifications for turnbarrels, tension rods and swaged cable-end connections for aircraft ACE/12 12/ DC BS SP 49 and 50 A1 Specifications for ball ends for swaging on cable. For aircraft (Suitable for 5 cwt. cable) ACE/12 12/ DC BS 7980 A1 Vehicle lifts. Installation, maintenance, thorough examination and safe use. Code of practice MHE/12 12/ DC BS SP 94 A2 Bronze oil-retaining bushes and thrust washers. For aircraft ACE/12 12/ DC BS 3HR 2 A2 Specification for nickel-chromiumcobalt-titanium-aluminium heat-resisting alloy billets, bars, forgings and parts (Nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5) ACE/61/-/48 12/ DC BS 4HR 100 A1 Procedure for inspection testing and acceptance of wrought heatresisting alloys ACE/61 12/ DC BS 6380 Guide to low temperature properties and cold weather use of diesel fuels and gas oils PTI/2 12/ DC NA to BS EN A1 UK National Annex to Eurocode 9. Design of aluminium structures. Structures susceptible to fatigue B/525/9 12/ DC NA to BS EN A1 UK National Annex to Eurocode 3. Design of steel structures. Piling CB/203 12/ DC NA to BS EN A1 UK National Annex to Eurocode 3. Design of steel structures. Steel bridges B/525/10 DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT ADOPTIONS All Draft British Standards are available from BSI Customer Services (see How to order on page 2) Most drafts are charged at to members and to non-members. Larger draft documents are charged at a higher price according to the number of pages and are priced individually below. Comments and identification of any third party IPR issues are welcome and should be sent to Debbie Stead, Head of Committee Service Centre Operations, BSI Head Office, 389 Chiswick High Road, London W4 4AL by 31 May, 2012 unless otherwise stated, to be considered by the relevant BSI committee. Draft standards may be modified before adoption and issue as British Standards. 12/ DC BS ISO Particle characterization of particulate systems. Vocabulary LBI/37 12/ DC BS ISO Space systems. Orbit determination and estimation. Process for describing techniques ACE/68/-/3 29 June, / DC BS ISO/IEC Information technology. Security techniques. Security requirements for cryptographic modules IST/33 15 May, / DC BS ISO Test conditions for machining centres. Accuracy of speeds and interpolations MTE/1/2 30 June, / DC BS ISO Test conditions for machining centres. Accuracy of a finished test piece MTE/1/2 12/ DC BS ISO Road vehicles. Fully automatic coupling systems 24 V (FACS) for heavy commercial vehicle combinations. 50 mm fifth wheel couplings. Electrical and pneumatic interface AUE/13 30 June, / DC BS ISO Internal combustion engines. Piston rings. Coil-spring-loaded oil control rings of narrow width made of cast iron MCE/14/-/10 12/ DC BS ISO Rubber and plastics gloves for food services. Limits for extractable substances CH/205/3 12/ DC BS ISO Corrosion of metals and alloys. Method of measuring the pitting potential for stainless steels by potentiokinetic control in sodium chloride solution ISE/NFE/8 12/ DC BS ISO Implants for surgery. Roentgen stereophotogrammetry for assessment of micromotion of orthopaedic implants CH/150/4 19 May, / DC BS EN ISO Metallic powders. Determination of flowrate by means of a calibrated funnel (Gustavsson flowmeter) ISE/65 30 June, / DC BS ISO Road vehicles. Fuse-links. User s guide AUE/16 12/ DC BS ISO Road vehicles. Interchange of digital information on electrical connections between towing and towed vehicles. Diagnostic communication AUE/16 12/ DC BS ISO Intelligent transport systems. Forward vehicle collision warning systems. Performance requirements and test procedures EPL/278 12/ DC BS EN Electrical safety in low voltage distribution systems up to 1000 V A.C. and 1500 V D.C. Equipment for testing, measuring or monitoring of protective measures. Functional safety requirements for insulation monitoring devices in IT systems and equipment for insulation fault location in IT systems PEL/85 15 April, / DC BS EN ISO Paints, varnishes and raw materials for paints and varnishes. Sampling STI/10 30 April, / DC BS EN ISO Microbiology of food and animal feed. Horizontal method for the enumeration of microorganisms. Colony count at 30ºC by the pour plate technique AW/9 Update Standards April 2012 Prices may be subject to change. 31

32 Drafts for Public Comment continued... 12/ DC BS ISO 6623 Internal combustion engines. Piston rings. Scraper rings made of cast iron MCE/14/-/10 12/ DC BS ISO Irrigation equipment. Safety devices for chemigation. Small plastics valves for chemigation AGE/30 12/ DC BS ISO Interior air of road vehicles. Screening method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials. Small chamber method EH/2/3 16 May, / DC BS ISO Natural gas. Organic components used as odorants. Requirements and test methods PTI/15 25 June, / DC BS EN Paints and varnishes. Powder organic coatings for galvanized or sherardized steel products for construction purposes STI/27 12/ DC BS ISO 7130 Earth-moving machinery. Guide to procedure for operator training B/513/1 12/ DC BS ISO Ships and marine technology. Risk assessment on antifouling systems on ships. Marine environmental risk assessment method for anti-fouling systems on ships using biocidally active substances SME/32/-/2 30 June, / DC BS ISO Heating and cooling systems in buildings. Method and design for calculation of the system energy performance. Combustion systems (boilers) RHE/2 12/ DC BS EN Flexible display devices. Terminology and letter symbols EPL/47 30 April, / DC BS ISO Test conditions for machining centres. Geometric tests for machines with horizontal spindle (horizontal Z-axis) MTE/1/2 12/ DC BS EN ISO Gas cylinders. Outlet connections for gas cylinder valves for compressed breathable air PVE/3/1 1 June, / DC BS EN ISO 3164 Earth-moving machinery. Laboratory evaluations of protective structures. Specifications for deflection-limiting volume B/513/1 15 May, / DC BS EN ISO A1 Geometrical Product Specifications (GPS). Inspection by measurement of workpieces and measuring equipment. Decision rules for proving conformance or nonconformance with specifications TDW/4 12/ DC BS ISO Paper and board. Determination of roughness/smoothness (air leak methods). Bendtsen method PAI/11 12/ DC BS ISO Adhesives. Test methods for isotropically electrically conducting adhesives. General test methods PRI/52 30 June, / DC BS ISO Adhesives. Test methods for isotropically electrically conducting adhesives. Determination of electrical characteristics PRI/52 30 June, / DC BS ISO Adhesives. Test methods for isotropically electrically conducting adhesives. Determination of heat transfer properties PRI/52 30 June, / DC BS EN Ceramic tiles. Definitions, classification, characteristics, evaluation of conformity and marking B/539 12/ DC BS ISO Condition monitoring and diagnostics of machines. Electrical signature analysis. Three-phase induction motors GME/21/7 14 May, / DC BS ISO Springs. Symbols FME/9/3 30 June, / DC BS EN Electronic paper displays. Terminology and generic specification EPL/47 30 April, / DC BS EN Railway applications. Track. Trailers and associated equipment. Technical requirements for running and working RAE/2 12/ DC BS EN Railway applications. Track. Demountable machines and associated equipment. Technical requirements for running and working RAE/2 12/ DC BS ISO Metallic products. Inspection documents ISE/100 12/ DC BS ISO 404 Steel and steel products. General technical delivery requirements ISE/100 12/ DC BS ISO Sampling procedures for inspection by variables. General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics members, non-members SS/5 12/ DC BS EN ISO A1 Foodstuffs. Methods of analysis for the detection of genetically modified organisms and derived products. Qualitative nucleic acid based methods AW/275 12/ DC BS ISO Testing of concrete. Determination of the chloride resistance of concrete, unidirectional diffusion B/517/1 30 June, / DC BS ISO Testing of concrete. Determination of the carbonation resistance of concrete. Accelerated carbonation method B/517/1 30 June, / DC BS ISO Belt drive. V-ribbed belts for the automotive industry. Fatigue test MCE/10 30 June, / DC BS EN ISO Geometrical product specifications (GPS). Wedges. Series of angles and slopes TDW/4 12/ DC BS EN ISO Geometrical product specifications (GPS). Wedges. Dimensioning and tolerancing TDW/4 12/ DC BS ISO Sampling procedures for inspection by variables. Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL members, non-members SS/5 32 Prices may be subject to change. Update Standards April 2012

33 12/ DC BS EN Water quality. Guidance for the routine sampling and pretreatment of benthic diatoms from rivers and lakes EH/3/5 12/ DC BS EN Water quality. Guidance for the surveying of aquatic macrophytes in running waters EH/3/5 12/ DC BS EN Water quality. Guidance for the identification, enumeration and interpretation of benthic diatom samples from rivers and lakes EH/3/5 12/ DC BS EN Smoke alarm devices FSH/12/2 12/ DC BS EN General requirements for Arc Fault Detection Devices (AFDD) members, non-members PEL/23/1 12/ DC BS ISO Fire detection and alarm systems. Design, installation, commissioning and service of fire detection and fire alarm systems in and around buildings FSH/12/1 19 June, / DC BS EN ISO 9227 Corrosion tests in artificial atmospheres. Salt spray tests ISE/NFE/8 12/ DC BS ISO Hot-rolled steel sheet products. Dimensional and shape tolerances ISE/109 12/ DC BS ISO 1832 Indexable inserts for cutting tools. Designation MTE/18 12/ DC BS ISO Tool holders for internal turning with cylindrical shank for indexable inserts. Designation, styles, dimensions and calculation for corrections MTE/18 12/ DC BS ISO Tool holders for internal turning with cylindrical shank for indexable inserts. Style F MTE/18 12/ DC BS ISO Tool holders for internal turning with cylindrical shank for indexable inserts. Style K MTE/18 12/ DC BS ISO Tool holders for internal turning with cylindrical shank for indexable inserts. Style L MTE/18 12/ DC BS ISO Tool holders for internal turning with cylindrical shank for indexable inserts. Style U MTE/18 12/ DC BS ISO Tool holders for internal turning with cylindrical shank for indexable inserts. Style Q MTE/18 12/ DC BS EN Railway applications. Suspension components. Hydraulic dampers RAE/3 12/ DC BS EN Surface acoustic wave (SAW) and bulk acoustic wave (BAW) duplexers of assessed quality. Generic specification EPL/49 15 May, / DC BS ISO/IEC Information technology. Small Computer System Interface (SCSI). SAS Protocol Layer (SPL) members, non-members ICT/-/1 12/ DC BS EN Maritime navigation and radiocommunication equipment and systems. Presentation of navigation-related information on shipborne navigational displays. General requirements, methods of testing and required test results members, non-members EPL/80 12/ DC BS ISO Guidelines for knowledge libraries and object libraries B/ May, / DC BS EN Chemicals used for treatment of water intended for human consumption. Sodium chloride for on site electrochlorination using membrane cells CII/59 30 April, / DC BS EN Sealants for non-structural use in joints in buildings and pedestrian walkways. Sealants for facade elements B/547 12/ DC BS EN Sealants for non-structural use in joints in buildings and pedestrian walkways. Sealants for glazing B/547 12/ DC BS EN Sealants for non-structural use in joints in buildings and pedestrian walkways. Sealants for sanitary joints B/547 12/ DC BS EN Sealants for non-structural use in joints in buildings and pedestrian walkways. Sealants for pedestrian walkways B/547 12/ DC BS ISO Adhesives. Test methods for isotropically electrically conducting adhesives. Determination of shear strength and electrical resistance using rigid-to-rigid bonded assemblies PRI/52 30 June, / DC BS ISO Adhesives. Test methods for isotropically electrically conducting adhesives. Shear fatigue testing PRI/52 30 June, / DC BS ISO Adhesives. Test methods for isotropically electrically conducting adhesives. Environmental test methods PRI/52 30 June, / DC BS ISO Adhesives. Test methods for isotropically electrically conducting adhesives. Electrochemical-migration test methods PRI/52 30 June, / DC BS ISO Rubber- or plastics-coated fabrics. Determination of bursting strength. Steel-ball method TCI/69 13 April, / DC BS ISO Rubber- or plastics-coated fabrics. Determination of bursting strength. Hydraulic method TCI/69 13 April, / DC BS EN 54-2 Fire detection and fire alarm systems. Control and indicating equipment FSH/12/3 18 June, / DC BS EN 26 Gas-fired instantaneous water heaters for the production of domestic hot water members, non-members GSE/29 12/ DC BS EN 89 Gas-fired storage water heaters for the production of domestic hot water members, non-members GSE/29 12/ DC BS EN Open data communication in building automation, controls and building management. Home and building electronic system. Product and system requirements RHE/16 Update Standards April 2012 Prices may be subject to change. 33

34 Drafts for Public Comment continued... 12/ DC BS EN ISO A1 Plastics. Determination of creep behaviour. Tensile creep 12/ DC BS EN ISO A1 Plastics. Determination of creep behaviour. Flexural creep by three-point loading 12/ DC BS EN 117 Wood preservatives. Determination of toxic values against Reticulitermes species (European termites) (Laboratory method) B/515 12/ DC BS EN Thermal insulation products for building applications. Determination of the mechanical properties of glass fibre meshes B/ April, / DC BS EN Thermal insulation products for building applications. Determination of the pull-through resistance of anchors through thermal insulation products B/ April, / DC BS EN Thermal insulating products for building applications. Determination of the hygrothermal behaviour of external thermal insulation composite systems with renders (ETICS) B/ April, / DC BS EN Chemicals used for treatment of swimming pool water. Potassium peroxomonosulfate CII/59 12/ DC BS EN Chemicals used for treatment of swimming pool water. Sodium peroxodisulfate CII/59 12/ DC BS EN Safety rules for the construction and installation of lifts. Existing lifts. Rules for the improvement of the accessibility of existing lifts for persons including persons with disability MHE/4 12/ DC BS EN Paragliding equipment. Paragliders. Requirements and test methods for classifying flight safety characteristics SW/136/6 12/ DC BS EN Secure storage units. Requirements, classification and methods of tests for resistance to burglary. Deposit systems GW/2 25 June, / DC BS EN Chemical analysis of ferrous materials. Determination of boron in steel. Spectrophotometric method ISE/102 12/ DC BS EN Chemical analysis of ferrous products. Determination of manganese in steels and irons. Electrometric titration method ISE/102 12/ DC BS EN Thermal insulating products for building equipment and industrial installations. Determination of water vapour transmission properties of preformed pipe insulation B/540 12/ DC BS EN Thermal insulating products for building equipment and industrial installations. Determination of short term water absorption by partial immersion of preformed pipe insulation B/540 12/ DC BS EN Thermal insulating products for building equipment and industrial installations. Determination of maximum service temperature B/540 12/ DC BS EN Thermal insulating products for building equipment and industrial installations. Determination of maximum service temperature for preformed pipe insulation B/540 12/ DC BS EN Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for wastewater systems. Components for vacuum drainage systems and for drainage systems on ships B/ June, / DC BS EN Foods of plant origin. Multiresidue methods for the determination of pesticide residues by GC or LC-MS/MS. Methods for extraction and clean-up AW/275 12/ DC BS EN Foods of plant origin. Multiresidue methods for the determination of pesticide residues by GC or LC-MS/MS. General considerations AW/275 12/ DC BS EN Foods of plant origin. Multiresidue methods for the determination of pesticide residues by GC or LC-MS/MS. Determination and confirmatory tests AW/275 12/ DC BS EN Cereals. Determination of Besatz in maize (Zea mays, L.) and sorghum (Sorghum bicolor, L.) AW/4 12/ DC BS EN Austenitic, austenitic-ferritic and ferritic longitudinally welded stainless steel tubes for the food and chemical industry ISE/110 12/ DC BS ISO/IEC Information technology. Radio frequency identification device performance test methods. Test methods for tag performance IST/34 12/ DC BS ISO/IEC Information technology. Radio frequency identification device conformance test methods. Test methods for air interface communications at 860 MHz to 960 MHz IST/34 12/ DC BS ISO/IEC Information technology. Service management. Guidance on scope definition and applicability of ISO/IEC IST/15 12/ DC BS EN ISO Stationary training equipment. General safety requirements and test methods SW/136/4 12/ DC BS EN ISO Health informatics. Electronic health record communication. Reference model IST/35 12/ DC BS EN Thermal solar systems and components. Factory made systems. General requirements RHE/25 12/ DC BS EN Thermal solar systems and components. Factory made systems. Test methods RHE/25 12/ DC BS ISO Plastics piping systems. Multilayer piping systems for outdoor gas installations. Specifications for systems PRI/88/2 12/ DC BS ISO 7583 Anodizing of aluminium and its alloys. Terms and definitions STI/32 12/ DC BS EN Characterization of sludges. Laboratory chemical conditioning procedure EH/5 12/ DC BS ISO Plastics. Differential scanning calorimetry (DSC). Determination of glass transition temperature and glass transition step height 30 June, Prices may be subject to change. Update Standards April 2012

35 12/ DC BS ISO Plastics. Differential scanning calorimetry (DSC). Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion 12/ DC BS EN ISO Microbiology of food and animal feed. Horizontal method for the enumeration of microorganisms. Colony count at 30ºC by the surface plating technique AW/9 12/ DC BS ISO Cork. Visual anomalies of cork stoppers for still wines PRI/81 12/ DC BS ISO Fasteners. Terminology. Vocabulary and definitions for coatings FME/9/1/1 12/ DC BS EN CISPR 24 A1 Information technology equipment. Immunity characteristics. Limits and methods of measurement GEL/210/11 12/ DC BS EN A1 Industrial communication networks. Installation of communication networks in industrial premises AMT/7 12/ DC BS ISO/IEC Information technology. Process assessment. An exemplar system life cycle process assessment model members, non-members IST/15 30 June, / DC BS EN Aerospace series. Cable, electrical, aircraft use. Test methods. Resistance to fluids ACE/6 30 April, / DC BS EN 3909 Aerospace series. Test fluids for electric components and subassemblies ACE/6 30 April, / DC BS EN Electrical insulating materials. Determination of the effects of ionizing radiation. Radiation interaction and dosimetry GEL/112 6 April, / DC BS EN Fibre optic interconnecting devices and passive components. Fibre optic WDM devices. Generic specification GEL/86/2 12/ DC BS EN Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces. General and guidance GEL/86/2 12/ DC BS EN Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Torque strength of coupling mechanism GEL/86/2 12/ DC BS EN Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Flexing of the strain relief of fibre optic devices GEL/86/2 12/ DC BS EN Guide for Computer-Based Control for Hydroelectric Power Plant Automation MCE/15 12/ DC BS EN Electrical installations in ships. Tankers. Special features JPEL/18 30 April, / DC BS ISO/IEC Information technology. Real-time locating systems (RTLS). Low rate pulse repetition frequency Ultra Wide Band (UWB) air interface IST/34 12/ DC BS ISO/IEC Information technology. Real-time locating systems (RTLS). High rate pulse repetition frequency Ultra Wide Band (UWB) air interface IST/34 12/ DC BS EN Field device integration. Overview AMT/7 12/ DC BS EN Field device integration. FDI Client members, non-members AMT/7 12/ DC BS EN Field device integration. FDI Server AMT/7 12/ DC BS EN Field device integration. FDI Packages AMT/7 12/ DC BS EN Field device integration. FDI Information Model AMT/7 12/ DC BS EN Field device integration. Technology Mapping AMT/7 12/ DC BS EN Field device integration. Communication Devices AMT/7 12/ DC BS EN Optical amplifiers. Test methods. Noise figure parameters. Signal power to total ASE power ratio GEL/86/3 15 April, / DC BS EN 650 Resilient floor coverings. Polyvinyl chloride floor coverings on jute backing or on polyester felt backing or on a polyester felt with a polyvinyl chloride backing. Specification PRI/3/60 12/ DC BS ISO Diesel engines. NOx reduction agent AUS 32. Refilling interface for passenger cars MCE/22 12/ DC BS EN Coaxial communication cables. Electrical test methods. Stability of phase test methods EPL/46 18 April, / DC BS EN Metallic communication cable test methods. Electromagnetic compatibility (EMC). Shielded screening attenuation, test method for measuring of the screening attenuation as up to and above 3 GHz. (Proposed horizontal standard) EPL/46 18 April, / DC BS EN Electric cables. Fire resistance test for unprotected electric cables (P classification) GEL/20/18 12/ DC BS ISO/IEC Information technology. Real-time locating system (RTLS) device performance test methods. Test methods for air interface communication at 2,4 GHz IST/34 12/ DC BS ISO/IEC Information technology. Real-time locating system (RTLS) device conformance test methods. Test methods for Chirp spread spectrum (CSS) air interface communication at 2,4 GHz IST/34 12/ DC BS EN Fixed capacitors for use in electronic equipment. Sectional specification. Fixed metallized polyphenylene sulfide film dielectric surface mount D.C. capacitors EPL/40X 20 April, / DC BS EN Fixed capacitors for use in electronic equipment. Sectional specification. Surface mount fixed tantalum electrolytic capacitors with conductive polymer solid electrolyte EPL/40X 20 April, 2012 Update Standards April 2012 Prices may be subject to change. 35

36 Drafts for Public Comment continued... 12/ DC BS EN Connectors for photovoltaic systems. Safety requirements and tests GEL/82 12/ DC BS EN Fixed capacitors for use in electronic equipment. Sectional specification. Surface mount fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte EPL/40X 20 April, / DC BS EN Fixed electric double-layer capacitors for use in electronic equipment. Generic specification EPL/40X 20 April, / DC BS EN 4711 Aerospace series. Screw, 12-point flange head (bi hexagonal head bolt), long thread, for tensile applications, continuous fibre reinforced-peek composite, temperature range -65ºC to 135ºC. Inch series ACE/12 12/ DC BS EN 4712 Aerospace series. Nuts, 12-point flange, self-locking, continuous fibre reinforced- PEEK composite, temperature range -65ºC to 135ºC. Inch series ACE/12 12/ DC BS EN 4713 Aerospace series. Nuts, anchor, selflocking, floating. Continuous fibre reinforced PEEK composite, temperature range -65ºC to 135ºC. Inch series ACE/12 12/ DC BS EN 4717 Aerospace series. Polyetherketone with 55 % continuous carbon fibre by volume (PEEK-CF55) ACE/65 12/ DC BS EN 4718 Aerospace series. Polyetherketone with 55 % continuous glass fibre by volume (PEEK-GF55) ACE/65 12/ DC BS EN Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175ºC continuous. Cable clamp 2 and 4 modules for connectors, series 2 and series 3. Product standard ACE/6 12/ DC BS IEC Mobile and fixed offshore units. Electrical installations. Installation JPEL/18 30 April, / DC BS IEC A1 Electrical installations in ships. Special features. Ships carrying specific dangerous goods and materials hazardous only in bulk JPEL/18 30 April, / DC BS EN Low-voltage switchgear and controlgear. Controller-device interfaces (CDIs). DeviceNet members, non-members PEL/17/2 30 June, / DC BS EN A1 Low-voltage fuses. Supplementary requirements for fuse-links for the protection of solar photovoltaic energy systems PEL/32 30 June, / DC BS EN Luminaires. Particular requirements. Handlamps CPL/34/4 30 June, 2012 DOCUMENTS NOT ISSUED AS DPCs Comments can be sent by or by post to named contacts at: BSI Head Office 389 Chiswick High Road London W4 4AL Tel: ISO/IEC DIS Information technology. Fibre Channel. Backbone 3 (FC-BB-3) This standard has been circulated to ISO members as a final committee draft by ISO/IEC JTC 1/SC 25. This has not been circulated as a Draft for Public Comment (DPC) but copies of the text are available from the Programme Manager (below). Comments should be made by 27 May, Contact: Jean Stride jean.stride@bsigroup.com ICT/-/1 ISO/IEC DIS Information technology. Small Computer. System Interface (SCSI). SCSI Stream Commands. 3 (SSC-3) This standard has been circulated to ISO members as a final committee draft by ISO/IEC JTC 1/SC 25. This has not been circulated as a Draft for Public Comment (DPC) but copies of the text are available from the Programme Manager (below). Comments should be made by 27 May, Contact: Jean Stride jean.stride@bsigroup.com ICT/-/1 CEN EUROPEAN STANDARDS EUROPEAN RATIFIED TEXTS The documents listed below have recently been issued by CEN but have not yet been published as BS ENs. BSI has an obligation to adopt all ENs and to withdraw any conflicting British Standards (BSs) or parts of BSs. The following will be implemented as BS ENs or as amendments to BS ENs shortly. Notification of their implementation will be given in the BS EN Publications section of the relevant edition of Update Standards. EN 54-25: Fire detection and fire alarm systems. Components using radio links CORRIGENDUM 1:March 2012 to EN 54-25:2008 FSH/12 EN 58:2012 Bitumen and bituminous binders. Sampling bituminous binders PTI/13 EN 417:2012 Non-refillable metallic gas cartridges for liquefied petroleum gases, with or without a valve, for use with portable appliances. Construction, inspection, testing and marking GSE/24 EN 932-5:2012 Tests for general properties of aggregates. Common equipment and calibration B/502 EN 940:2009+A1:2012 Safety of woodworking machines. Combined woodworking machines MTE/23 EN 997:2012 WC pans and WC suites with integral trap B/503 EN :2012 Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines. Refining plants MCE/3/9 EN 1384:2012 Helmets for equestrian activities PH/6/5 EN 1385:2012 Helmets for canoeing and white water sports PH/6/6 EN 1562:2012 Founding. Malleable cast irons ISE/111 EN :2012 Welding. Basic weld joint details in steel. Clad, buttered and lined pressurized components WEE/-/1 36 Prices may be subject to change. Update Standards April 2012

37 EN :2012 Tests for chemical properties of aggregates. Determination of loss of ignition of Municipal Incinerator Bottom Ash Aggregate (MIBA Aggregate) B/502/6 EN 2245:2012 Aerospace series. Pipelines for liquids and gases. Definitions ACE/69 EN :2012 Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65ºC to 175ºC continuous, 200ºC continuous, 260ºC peak. Specification of performance and contact arrangements ACE/6 EN 3355:2012 Aerospace series. Titanium alloy TI-P64001 (Ti- 6Al-4V). Annealed. Extruded section. De 150 mm. 900 MPa Rm 1160 MPa ACE/61/-/49 EN 3382:2012 Aerospace series. Rings retaining, internal, axial mounting, steel, phosphated ACE/12 EN 3383:2012 Aerospace series. Rings retaining, internal, axial mounting, steel, vacuum cadmium plated ACE/12 EN 3384:2012 Aerospace series. Rings retaining, external, axial mounting, steel, phosphated ACE/12 EN 3385:2012 Aerospace series. Rings retaining, external, axial mounting, steel, vacuum cadmium plated ACE/12 EN 3386:2012 Aerospace series. Rings retaining, radial mounting, steel, phosphated ACE/12 EN 3417:2012 Aerospace series. Rivets, solid, universal head, in nickel base alloy NI-P11, metric series ACE/12 EN :2012 Aerospace series. Cables, electrical, aircraft use. Test methods. Tensile test on conductors and strands ACE/6 EN 3768:2012 Aerospace series. Nuts, anchor, self-locking, one lug, fixed, reduced series, with counterbore, in heat resisting steel, MoS2 lubricated. Classification: 1100 MPa (at ambient temperature)/315ºc ACE/12 EN 4443:2012 Aerospace series. Nuts, elliptical clinch, selflocking, MJ threads, in heat resisting steel FE- PA2601 (A286), MoS2 coated, Classification: 900 MPa (at ambient temperature)/425ºc ACE/12 EN 12492:2012 Mountaineering equipment. Helmets for mountaineers. Safety requirements and test methods PH/6 EN : Bituminous mixtures. Test methods for hot mix asphalt. Determination of the maximum density CORRIGENDUM 1:February 2012 to EN :2009 B/510/1 EN :2012 Bituminous mixtures. Test methods for hot mix asphalt. Stiffness B/510/1 EN :2012 Shell boilers. General PVE/2 EN :2012 Shell boilers. Materials for pressure parts of boilers and accessories PVE/2 EN : Crane safety. General design. Load actions CORRIGENDUM 1:March 2012 to EN :2011 MHE/3/1 EN 13081:2008+A1:2012 Tanks for transport of dangerous goods. Service equipment for tanks. Vapour collection adaptor and coupler AUE/18 EN 13082:2008+A1:2012 Tanks for transport of dangerous goods. Service equipment for tanks. Vapour transfer valve AUE/18 EN 13484:2012 Helmets for users of luges PH/6/6 EN 13541:2012 Glass in building. Security glazing. Testing and classification of resistance against explosion pressure B/520/3 EN 13781:2012 Protective helmets for drivers and passengers of snowmobiles and bobsleighs PH/6/6 EN :2012 Textiles. Methods for determination of certain aromatic amines derived from azo colorants. Detection of the use of certain azo colorants accessible with and without extracting the fibres TCI/80 EN : Transportable gas cylinders. Refillable welded receptacles of a capacity not exceeding 150 litres. Welded carbon steel cylinders made to a design justified by experimental methods CORRIGENDUM 1:March 2012 to EN :2010 PVE/3/3 EN :2012 Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene with mineral modifiers (PP-MD). Specifications for pipes, fittings and the system PRI/88/1 EN 14917:2009+A1:2012 Metal bellows expansion joints for pressure applications GSE/42 EN :2012 Winter maintenance equipment. Snow ploughs. Testing criteria and their requirements B/513 EN 15948:2012 Cereals. Determination of moisture and protein. Method using Near-Infrared-Spectroscopy in whole kernels AW/4 EN 15949:2012 Safety of machinery. Safety requirements for bar mills, structural steel mills and wire rod mills MCE/23 EN 16126:2012 Solid biofuels. Determination of particle size distribution of disintegrated pellets PTI/17 EN 16127:2012 Solid biofuels. Determination of length and diameter of pellets PTI/17 EN 16144:2012 Liquid petroleum products. Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels. Fixed range injection period, constant volume combustion chamber method PTI/13 EN 16158:2012 Animal feeding stuffs. Determination of semduramicin content. Liquid chromatographic method using a tree analytical approach AW/10 EN 16194:2012 Mobile non-sewer-connected toilet cabins. Requirements of services and products relating to the deployment of cabins and sanitary products B/508/1 EN : Detail specification. Fixed low power film high stability SMD resistors. Rectangular. Stability classes 0,1; 0,25 CORRIGENDUM 2:February 2012 to EN :2011 EPL/40X CEN REPORTS CEN/TR 12108:2012 Plastics piping systems. Guidance for the installation inside buildings of pressure piping systems for hot and cold water intended for human consumption PRI/88/2 Update Standards April 2012 Prices may be subject to change. 37

38 CEN Reports continued... CEN/TR 15601:2012 Hygrothermal performance of buildings. Resistance to wind-driven rain of roof coverings with discontinuously laid small elements. Test methods B/540 CEN TECHNICAL SPECIFICATIONS CEN/TS :2012 Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure. Polypropylene (PP). Guidance for the assessment of conformity PRI/88/1 CEN/TS :2012 Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure. Polyethylen (PE). Guidance for the assessment of conformity PRI/88/1 CEN/TS 14632:2012 Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Guidance for the assessment of conformity PRI/88/2 CEN/TS 16118:2012 Sheltered housing. Requirements for services for older people provided in a sheltered housing scheme SVS/8/1 CEN/TS 16177:2012 Sludge, treated biowaste and soil. Extraction for the determination of extractable ammonia, nitrate and nitrite H/-/4 CEN/TS 16178:2012 Sludge, treated biowaste and soil. Determination of pharmaceutical products H/-/4 CEN/TS 16182:2012 Sludge treated biowaste and soil. Determination of nonylphenols (NP) and nonylphenol-mono- and diethoxylates using gas chromatography with mass selective detection (GCMS) H/-/4 CEN/TS 16183:2012 Sludge, treated biowaste and soil. Determination of selected phthalates using capillary gas chromatography with mass spectrometric detection (GC-MS) H/-/4 CEN/TS 16188:2012 Sludge, treated biowaste and soil. Determination of elements in aqua regia and nitric acid digests. Flame atomic absorption spectrometry method (FAAS) H/-/4 CEN/TS 16189:2012 Sludge, treated biowaste and soil. Determination of linear alkylbenzene sulfonates (LAS) by high-performance liquid chromatography (HPLC) with fluorescence detection (FLD) or mass selective detection (MS) H/-/4 CEN/TS 16190:2012 Sludge, treated biowaste and soil. Determination of dioxins and furans and dioxinlike polychlorinated biphenyls by gas chromatography with high resolution mass selective detection (HR GC-MS) H/-/4 CEN/TS 16295:2012 Plastics. Declaration of the bio-based carbon content PRI/-/1 CEN/TS 16331:2012 Electronic fee collection. Interoperable application profiles for autonomous systems EPL/278 CEN/TS 16371:2012 Guidelines for implementors of EN and EN IDT/2/18 CENELEC PUBLICATIONS EUROPEAN RATIFIED TEXTS The documents listed below have recently been issued by CENELEC but have not yet been published as BS ENs. BSI has an obligation to adopt all ENs and to withdraw any conflicting British Standards (BSs) or parts of BSs. The following will be implemented as BS ENs or as amendments to BS ENs shortly. Notification of their implementation will be given in the BS EN Publications section of the relevant edition of Update Standards. EN 50360: Product standard to demonstrate the compliance of mobile phones with the basic restrictions related to human exposure to electromagnetic fields (300 MHz-3 GHz) AMENDMENT 1:March 2012 to EN 50360:2001 GEL/106 EN 50553:2012 Railway applications. Requirements for running capability in case of fire on board of rolling stock GEL/9/-/2 EN 50580:2012 Safety of hand-held electric motor operated tools. Particular requirements for spray guns CPL/116/2 EN : (IEC :1969/A44:2011) Lamp caps and holders together with gauges for the control of interchangeability and safety. Lampholders AMENDMENT 44:February 2012 to EN :1993 CPL/34/2 EN : (IEC :1969/A45:2011) Lamp caps and holders together with gauges for the control of interchangeability and safety. Gauges AMENDMENT 45:February 2012 to EN :1993 CPL/34/2 EN : (IEC :2002/A2:2011) Household and similar electrical appliances. Safety. Particular requirements for food waste disposers AMENDMENT 2:March 2012 to EN :2003 CPL/61/1 EN : Household and similar electrical appliances. Safety. Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers AMENDMENT 13:February 2012 to EN :2003 CPL/61/4 EN : (IEC :2002/A2:2011) Household and similar electrical appliances. Safety. Particular requirements for ironers AMENDMENT 2:March 2012 to EN :2002 CPL/61/7 EN : (IEC :2002/A2:2011) Household and similar electrical appliances. Safety. Particular requirements for portable heating tools and similar appliances AMENDMENT 2:March 2012 to EN :2002 CPL/61/7 EN : (IEC :2002/A2:2011) Household and similar electrical appliances. Safety. Particular requirements for stationary circulation pumps for heating and service water installations AMENDMENT 2:March 2012 to EN :2003 CPL/61/1 EN : (IEC :2002/A2:2011) Household and similar electrical appliances. Safety. Particular requirements for water-bed heaters AMENDMENT 2:March 2012 to EN :2003 CPL/61/7 EN : (IEC :2002/A2:2011) Household and similar electrical appliances. Safety. Particular requirements for foot warmers and heating mats AMENDMENT 2:March 2012 to EN :2003 CPL/61/7 EN :2012 (IEC :2011) Connectors for electronic equipment. Tests and measurements. Electrical load and temperature EPL/48 EN :2012 (IEC :2011) Connectors for electronic equipment. Tests and measurements. Signal integrity tests up to 500 MHz on IEC series connectors. Tests 27a to 27g EPL/48 38 Prices may be subject to change. Update Standards April 2012

39 New Standard BS 8904:2011, Guidance for community sustainable development Sustainable foundations support strong communities improving efficiency, saving money and establishing long-term staying power. BS 8904 assists community leaders by providing recommendations which may strengthen communities and promote lasting economic and social stability. It also helps reduce their environmental impacts while maintaining a strategic vision for the future. Through stakeholder engagement, communities and community groups can identify the most pressing sustainable development issues, set objectives and targets for improvement and implement a plan of action. This creates a continually evolving body with the assistance of BS 8904 s innovative and comprehensive maturity matrix. Local government, businesses or non-governmental organizations like city councils, community-based charities, religious groups and organizations, agricultural co-ops, and community planners benefit from BS 8904 guidance. This standard is the latest in the BS 8900 series of sustainable development standards and continues in line with BS 8900:2006, Guidance for managing sustainable development. To contact us visit or contact BSI Customer Services quoting marketing reference code BS 8904-US1204 Tel +44 (0) Fax +44 (0) orders@bsigroup.com raising standards worldwide Standards and publications may also be ordered via the BSI shop at *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0) BSI British Standards Institution 2012

40 CENELEC Publications continued... EN :2012 (IEC :2011) Optical fibres. Product specifications. General GEL/86/1 EN :2012 (IEC :2009) Non-cellulosic papers for electrical purposes. Definitions and general requirements GEL/15 EN :2012 (IEC :2011) Fibre optic interconnecting devices and passive components. Connectors for optical fibres and cables. Blank detail specification GEL/86/2 EN :2012 (IEC :2011) Fibre optic interconnecting devices and passive components. Adaptors for fibre optic connectors. Blank detail specification GEL/86/2 EN :2012 (IEC :2011) Optical amplifiers. Multichannel applications. Performance specification template GEL/86/3 EN :2012 (IEC :2011) Fibre optic interconnecting devices and passive components. Fibre optic fan-outs. Blank detail specification GEL/86/2 EN :2012 (IEC :2011) Lamp controlgear. Particular requirements for D.C. or A.C. supplied electronic stepdown convertors for filament lamps CPL/34/3 EN :2012 (IEC :2011) Lamp controlgear. Particular requirements for battery supplied electronic controlgear for emergency lighting (self-contained) CPL/34/3 EN : (IEC :2004/A1:2011) Photovoltaic (PV) module safety qualification. Requirements for construction AMENDMENT 1:February 2012 to EN :2007 GEL/82 EN : (IEC :2004/A1:2011) Photovoltaic (PV) module safety qualification. Requirements for testing AMENDMENT 1:February 2012 to EN :2007 GEL/82 EN : (IEC :2004/A1:2011) Adjustable speed electrical power drive systems. EMC requirements and specific test methods AMENDMENT 1:March 2012 to EN :2004 PEL/22 EN :2012 (IEC :2011) Mechanical structures for electronic equipment. Outdoor enclosures. Design guidelines EPL/48 EN :2012 (IEC :2011) Mechanical structures for electronic equipment. Outdoor enclosures. Coordination dimensions EPL/48 EN :2012 (IEC :2011) Mechanical structures for electronic equipment. Outdoor enclosures. Environmental requirements, tests and safety aspects EPL/48 EN :2012 (IEC :2011) Fibre optic active components and devices. Performance standards. General and guidance GEL/86/3 EN :2012 (IEC :2007) Radiation protection instrumentation. Passive integrating dosimetry systems for environmental and personal monitoring. General characteristics and performance requirements NCE/2 CEN/CLC Guide 21:2012 CEN-CENELEC Membership Fee Calculation methodology and periodic review policy CLC Guide 1:2012 Survey of Resolutions of the CENELEC General Assembly CENELEC TECHNICAL SPECIFICATIONS CLC/TS 62441:2012 (IEC/TS 62441:2011) Safeguards against accidentally caused candle flame ignition for audio/video, communication and information technology equipment EPL/108 IEC PUBLICATIONS It is BSI policy to supply the UK version of all adopted standards, which are published as British standards, unless otherwise requested. The following IEC publications are available from BSI Customer Services (see How to order on page 2) IEC : Lamp caps and holders together with gauges for the control of interchangeability and safety. Lampholders AMENDMENT 40:April 2010 to IEC : members, non-members CPL/34/2 IEC : Lamp caps and holders together with gauges for the control of interchangeability and safety. Gauges AMENDMENT 41:February 2010 to IEC : members, non-members CPL/34/2 IEC : Environmental testing. Tests. Test U. Robustness of terminations and integral mounting devices CORRIGENDUM 1:January 2012 to IEC :2006 EPL/501 IEC : Explosive atmospheres. Equipment protection by intrinsic safety i CORRIGENDUM 1:January 2012 to IEC :2011 EXL/31 IEC :2012 Electroacoustics. Hearing aids. Methods for characterising signal processing in hearing aids with a speech-like signal members, non-members EPL/29 IEC 60296:2012 (Edition 4) Fluids for electrotechnical applications. Unused mineral insulating oils for transformers and switchgear members, non-members GEL/10 IEC :2012 (Edition 4) Household and similar electrical appliances. Safety. Particular requirements for wet and dry vacuum cleaners, including power brush, for commercial use members, non-members CPL/61/10 IEC :2012 (Edition 3) Household and similar electrical appliances. Safety. Particular requirements for high pressure cleaners and steam cleaners members, non-members CPL/61/10 IEC :2012 Household and similar electrical appliances. Safety. Particular requirements for robotic battery powered electrical lawnmowers members, non-members CPL/116 IEC/TR 60344: Calculation of D.C. resistance of plain and coated copper conductors of low-frequency cables and wires. Application guide CORRIGENDUM 1:February 2012 to IEC/TR 60344:2007 EPL/46 IEC :2012 (Edition 4) Solderless connections. Press-in connections. General requirements, test methods and practical guidance members, non-members EPL/48 40 Prices may be subject to change. Update Standards April 2012

41 Newly revised BS Technical product documentation and specification What is BS 8888? BS 8888:2011 brings together, in one easy-to-follow document, all international standards needed to prepare technical product specifications (TPS), in accordance with geometrical product specification principles. BS 8888 helps you to make better use of the ISO system of product specification because it covers more than just engineering drawing: instead you will find all aspects of technical product specification, including, for instance, the use of 3D CAD models to define component geometry are demonstrated. BS 8888 ensures you will: representing products for misinterpretation manufacturing process Why has BS 8888 been upgraded? This revision of BS 8888 introduces the new international documentation and geometrical product specification standards published since the 2008 edition. It also incorporates more fully than previous editions some of the fundamental requirements of the key international standards relevant to the preparation of technical product specifications, in particular BS EN ISO 1101 on geometrical tolerancing and BS EN ISO 5459 on datums. These changes to the structure and content of BS 8888 are intended to make the standard more user friendly for the UK industry. The inclusion of fundamental requirements and principles will help you better understand and implement the full complement of International Standards developed by ISO/TC 213, Geometrical product specifications and verification, and ISO/TC 10, Technical product documentation. Where do I get the new edition? You can discover more and easily download the standard from the BSI shop. To contact us visit or contact BSI Customer Services quoting marketing reference code BS8888-US1204 Tel +44 (0) Fax +44 (0) orders@bsigroup.com raising standards worldwide Standards and publications may also be ordered via the BSI shop at *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0) BSI British Standards Institution 2012

42 IEC Publications continued... IEC : Low-voltage electrical installations. Requirements for special installations or locations. Marinas and similar locations AMENDMENT 1:February 2012 to IEC : members, 8.59 non-members JPEL/64 IEC 60436: Electric dishwashers for household use. Methods for measuring the performance AMENDMENT 2:February 2012 to IEC 60436: members, non-members CPL/59/1 IEC :2012 (Edition 3) Connectors for electronic equipment. Tests and measurements. General. Applicable publications members, non-members EPL/48 IEC :2012 Medical electrical equipment. Particular requirements for the basic safety and essential performance of ambulatory electrocardiographic systems members, non-members CH/62/4 IEC :2012 (Edition 3) Electroacoustics. Audiometric equipment. Equipment for pure-tone audiometry members, non-members EPL/29 IEC : Optical fibre cables. Generic specification. General CORRIGENDUM 1:January 2012 to IEC :2011 GEL/86/1 IEC : Low-voltage switchgear and controlgear. Switches, disconnectors, switch-disconnectors and fuse-combination units AMENDMENT 1:February 2012 to IEC : members, non-members PEL/17/2 IEC :2012 (Edition 3) General purpose lead-acid batteries (valveregulated types). General requirements, functional characteristics. Methods of test members, non-members PEL/21 IEC :2012 (Edition 3) General purpose lead-acid batteries (valveregulated types). Dimensions, terminals and marking members, non-members PEL/21 IEC 61121:2012 (Edition 4) Tumble dryers for household use. Methods for measuring the performance members, non-members CPL/59/1 IEC 61181: Mineral oil-filled electrical equipment. Application of dissolved gas analysis (DGA) to factory tests on electrical equipment AMENDMENT 1:February 2012 to IEC 61181: members, non-members GEL/10 IEC :2012 Coaxial communication cables. Blank detail specification for semi-flexible cables with polytetrafluoroethylene (PTFE) dielectric members, non-members EPL/46 IEC :2012 Coaxial communication cables. Sectional specification for semi-flexible cables with polytetrafluoroethylene (PTFE) dielectric members, non-members EPL/46 IEC :2012 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Withdrawal force from a resilient alignment sleeve using gauge pins members, non-members GEL/86/2 IEC : Converter transformers. Transformers for industrial applications CORRIGENDUM 1:January 2012 to IEC :2011 PEL/14 IEC :2012 Low-voltage switchgear and controlgear assemblies. Distribution boards intended to be operated by ordinary persons (DBO) members, non-members PEL/17/3 IEC : Liquid crystal display devices. Measuring methods for liquid crystal display modules. Reflective type CORRIGENDUM 1:January 2012 to IEC :2011 EPL/47 IEC :2012 Fibre optic interconnecting devices and passive components. Performance standard. Nonconnectorised single-mode bidirectional 1310 nm upstream and 1490 nm downstream WWDM devices for category O. Uncontrolled environment members, non-members GEL/86/2 IEC : Fibre optic connector optical interfaces. Optical interface. 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-pc composite ferrule using Cu-Ni-alloy as fibre surrounding material, single mode fibre AMENDMENT 1:February 2012 to IEC : members, non-members GEL/86/2 IEC 62034:2012 Automatic test systems for battery powered emergency escape lighting members, non-members CPL/34/4 IEC :2012 Semiconductor devices. Micro-electromechanical devices. Bend and shear type test methods of measuring adhesive strength for MEMS structures members, non-members EPL/47 IEC :2012 Semiconductor devices. Micro-electromechanical devices. Forming limit measuring method of metallic film materials members, non-members EPL/47 IEC : High-voltage switchgear and controlgear. Alternating current disconnectors and earthing switches CORRIGENDUM 1:January 2012 to IEC :2001/A1:2011 PEL/17/1 IEC :2012 Fuel cell technologies. Stationary fuel cell power systems. Safety members, non-members GEL/105 IEC 62337:2012 Commissioning of electrical, instrumentation and control systems in the process industry. Specific phases and milestones members, non-members AMT/7 IEC 62381:2012 Automation systems in the process industry. Factory acceptance test (FAT), site acceptance test (SAT), and site integration test (SIT) members, non-members AMT/7 IEC : Industrial communication networks. High availability automation networks. Crossnetwork Redundancy Protocol (CRP) AMENDMENT 1:February 2012 to IEC : members, non-members AMT/7 IEC 62560: Self-ballasted LED-lamps for general lighting services by voltage > 50 V. Safety specifications CORRIGENDUM 1:January 2012 to IEC 62560:2011 CPL/34/1 IEC :2012 Lightning protection system components (LPSC). Requirements for connection components members, non-members GEL/81 42 Prices may be subject to change. Update Standards April 2012

43 First Telecommunications Cabling book of its kind! Telecommunications Cabling: Guidance on Standards and Best Practice for Construction Projects is a must-read for those conceiving, designing or procuring structured cabling for the built environment and demonstrates how to successfully organize cabling projects from beginning to end. Whether you re working on a small, medium or largescale construction project, a new build or upgrade or your cabling needs are long term or short; making the right decisions at the right time will undoubtedly affect the way an investment works and the end users experience. Written by professionals with first-hand experience of delivering telecommunications infrastructure projects over many years, the book demystifies the process of specifying and implementing structured cabling standards, helping readers to navigate the maze of choices, the common pitfalls and key management decisions. Transmitting useful information The book is a vital reference guide for those seeking to understand the need for structured cabling, the use of cabling standards in building design and the impact of convergence in IP networks and the built environment. It enables its reader to: Effectively map business requirements to design objectives Design key strategies and techniques Recognize and manage technical risks Identify and supervize administrative risks Overcome operational and management issues To download a complimentary chapter of this book, please visit our website now. For more information or to purchase please contact us quoting marketing reference BIP 0123-US1204: Tel Fax electronic.products@bsigroup.com raising standards worldwide BCM for SME s: New Book by David Lacey out now! Any incident, large or small, can cause major disruption to your organization. However if you plan now, rather than waiting for it to happen, you will be able to get back to business in the quickest possible time. David Lacey, author of Business Continuity Management for Small and Medium Sized Enterprises: How to survive a major disaster or failure teaches SMEs how to master business continuity management with minimum time, funding and manpower. His book seeks to equip nonspecialists with the practical skills and knowledge needed to identify business continuity risks and deter them from occurring in the first place. The book will enable your organization to: Master the BCM Programme Management lifecycle Determine a successful BCM strategy Identify crucial risk factors already affecting your organization Deliver continued service during and beyond an emergency Embed BCM into its culture Maintain adequate measures to protect information, stock, premises and staff if an incident occurs Effectively understand Business Continuity Management and develop a plan well suited to your requirements today! To download your free chapter and discover how this book can benefit you, please visit our website. For more information or to purchase please contact us quoting marketing reference BIP 2217-US1204: Tel Fax electronic.products@bsigroup.com raising standards worldwide

44 IEC Publications continued... IEC :2012 Lightning protection system components (LPSC). Requirements for conductors and earth electrodes members, non-members GEL/81 IEC :2012 Lightning Protection System Components (LPSC). Requirements for isolating spark gaps (ISG) members, non-members GEL/81 IEC 62639:2012 Fluorescent induction lamps. Performance specification members, non-members CPL/34/1 IEC :2012 Medical electrical equipment. Particular requirements for the basic safety and essential performance of dental equipment members, non-members CH/62/4 ISO PUBLICATIONS It is BSI policy to supply the UK version of all adopted standards, which are published as British standards, unless otherwise requested. The following ISO publications are available from BSI Customer Services (see How to order on page 2) ISO 230-1:2012 (Edition 3) Test code for machine tools. Geometric accuracy of machines operating under no-load or quasistatic conditions members, non-members MTE/1/2 ISO 355: Rolling bearings. Tapered roller bearings. Boundary dimensions and series designations AMENDMENT 1:February 2012 to ISO 355: members, non-members MCE/7 ISO 527-1:2012 Plastics. Determination of tensile properties. General principles members, non-members ISO 527-2:2012 Plastics. Determination of tensile properties. Test conditions for moulding and extrusion plastics members, non-members ISO :2012 (Edition 5) Transfusion equipment for medical use. Transfusion sets for single use members, non-members CH/212 ISO :2012 (Edition 3) Plastics. Polystyrene (PS) moulding and extrusion materials. Designation system and basis for specifications members, non-members PRI/82 ISO 2919:2012 (Edition 3) Radiological protection. Sealed radioactive sources. General requirements and classification members, non-members NCE/2 ISO 3316:2012 (Edition 4) Assembly tools for screws and nuts. Attachments for hand-operated square drive socket wrenches. Dimensions and tests members, non-members MTE/15 ISO :2012 (Edition 5) Fluid power systems. O-rings. Inside diameters, cross-sections, tolerances and designation codes members, non-members MCE/11 ISO :2012 Graphical symbols. Safety colours and safety signs. Design principles for graphical symbols for use in safety signs members, non-members PH/8/1 ISO/TR :2012 Plain bearings. Terms, definitions, classification and symbols. Abbreviated terms members, non-members MCE/12 Will not be implemented as a British Standard ISO 7199: Cardiovascular implants and artificial organs. Blood-gas exchangers (oxygenators) AMENDMENT 1:February 2012 to ISO 7199: members, non-members CH/150/2 ISO :2012 Control charts. Acceptance control charts members, non-members SS/4 ISO 8009: Mechanical contraceptives. Reusable natural and silicone rubber contraceptive diaphragms. Requirements and tests AMENDMENT 1:February 2012 to ISO 8009: members, non-members CH/157 Will not be implemented as a British Standard ISO :2012 Acoustics. Audiometric test methods. Speech audiometry members, non-members EH/1 ISO 8373:2012 Robots and robotic devices. Vocabulary members, non-members AMT/-/2 ISO :2012 Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blastcleaned steel substrates. Specifications and definitions for ISOsurface profile comparators for the assessment of abrasive blast-cleaned surfaces members, non-members STI/21 ISO :2012 Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blastcleaned steel substrates. Method for the grading of surface profile of abrasive blastcleaned steel. Comparator procedure members, non-members STI/21 ISO :2012 Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blastcleaned steel substrates. Method for the calibration of ISOsurface profile comparators and for the determination of surface profile. Focusing microscope procedure members, non-members STI/21 ISO :2012 Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blastcleaned steel substrates. Method for the calibration of ISOsurface profile comparators and for the determination of surface profile. Stylus instrument procedure members, non-members STI/21 44 Prices may be subject to change. Update Standards April 2012

45 ISO 8533: Glass-reinforced thermosetting plastics (GRP) pipes and fittings. Test methods to prove the design of cemented or wrapped joints AMENDMENT 1:March 2012 to ISO 8533: members, non-members PRI/88/2 Will not be implemented as a British Standard ISO :2012 Ergonomics of human-system interaction. Forms members, non-members PH/9 ISO 9413:2012 Tyre valves. Dimensions and designation members, non-members AUE/4 ISO :2012 Dentistry. Compatibility testing. Metal-ceramic systems members, non-members CH/106/2 ISO :2012 Thermal performance of windows, doors and shutters. Calculation of thermal transmittance. Numerical method for frames members, non-members B/540 ISO 10361:2012 Textile floor coverings. Production of changes in appearance by means of Vettermann drum and hexapod tumbler testers members, non-members PRI/3 ISO 10467: Plastics piping systems for pressure and nonpressure drainage and sewerage. Glassreinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin AMENDMENT 1:March 2012 to ISO 10467: members, non-members PRI/88/2 Will not be implemented as a British Standard ISO 10597:2012 (Edition 3) Road vehicles. Flat attachment fixing nuts for commercial vehicles. Test methods members, non-members AUE/4 ISO 11063:2012 Soil quality. Method to directly extract DNA from soil samples members, non-members EH/4 Will not be implemented as a British Standard ISO 11118:1999 Gas cylinders. Non-refillable metallic gas cylinders. Specification and test methods members, non-members PVE/3/3 Will not be implemented as a British Standard ISO :2012 Soil quality. Determination of the effects of pollutants on soil flora. Method for the measurement of inhibition of root growth members, non-members EH/4 ISO :2012 Road vehicles. Connectors for the electrical connection of towing and towed vehicles. 13- pole connectors for vehicles with 12 V nominal supply voltage not intended to cross water fords members, non-members AUE/16 ISO :2012 Cranes. Access, guards and restraints. Jib cranes members, non-members MHE/3/3 Will not be implemented as a British Standard ISO :2012 Tractors and machinery for agriculture and forestry. Serial control and communications data network. Physical layer members, non-members AGE/6 ISO 11892:2012 Space systems. Subsystems/units to spacecraft interface control document members, non-members ACE/68/-/2 ISO 12914:2012 Soil quality. Microwave-assisted extraction of the aqua regia soluble fraction for the determination of elements members, non-members EH/4 Will not be implemented as a British Standard ISO/TS :2012 (CD-ROM) Electronic fee collection. Evaluation of on-board and roadside equipment for conformity to ISO/TS Abstract test suite members, non-members EPL/278 ISO/IEC : Information technology. Programming languages. Prolog. General core CORRIGENDUM 2:February 2012 to ISO/IEC :1995 IST/5/-/17 ISO :2012 Environmental management for concrete and concrete structures. General principles members, non-members B/517 ISO :2012 Condition monitoring and diagnostics of machines. Data processing, communication and presentation. Data communication members, non-members GME/21/7 ISO/IEC : Information technology. Generic coding of moving pictures and associated audio information. Systems AMENDMENT 6:December 2011 to ISO/IEC : members, non-members IST/37 Will not be implemented as a British Standard ISO/IEC : Identification cards. Contactless integrated circuit cards. Proximity cards. Transmission protocol AMENDMENT 1:March 2012 to ISO/IEC : members, non-members IST/17 ISO/IEC :2012 Information technology. Home electronic system (HES) architecture. Intelligent grouping and resource sharing for HES Class 2 and Class 3. Basic application members, non-members IST/6 Will not be implemented as a British Standard ISO/IEC :2012 Information technology. Home electronic system (HES) architecture. Intelligent grouping and resource sharing for HES Class 2 and Class 3. Device type members, non-members IST/6 Will not be implemented as a British Standard ISO/IEC :2012 Information technology. Home electronic system (HES) architecture. Intelligent grouping and resource sharing for HES Class 2 and Class 3. Service type members, non-members IST/6 Will not be implemented as a British Standard ISO/IEC :2012 Information technology. Home electronic system (HES) architecture. Intelligent grouping and resource sharing for HES Class 2 and Class 3. Application profile. AV profile members, non-members IST/6 Will not be implemented as a British Standard ISO/IEC :2012 Information technology. Implementation and operation of customer premises cabling. Planning and installation members, non-members TCT/7 ISO/IEC :2012 Information technology. Control network protocol. Twisted pair communication members, non-members ICT/-/1 Update Standards April 2012 Prices may be subject to change. 45

46 ISO Publications continued... ISO/IEC :2012 Information technology. Control network protocol. Power line channel specification members, non-members ICT/-/1 ISO/IEC :2012 Information technology. Control network protocol. IP communication members, non-members ICT/-/1 ISO 15388:2012 Space systems. Contamination and cleanliness control members, non-members ACE/68/-/1 ISO : Specification and qualification of welding procedures for metallic materials. Welding procedure test. Arc and gas welding of steels and arc welding of nickel and nickel alloys AMENDMENT 2:February 2012 to ISO : members, non-members WEE/-/1 ISO :2012 Agricultural irrigation equipment. Sprinklers. Definition of terms and classification members, non-members AGE/30 ISO/TS :2012 Electronic fee collection. Evaluation of equipment for conformity to ISO/TS Test suite structure and test purposes members, non-members EPL/278 ISO/TS :2012 Electronic fee collection. Evaluation of equipment for conformity to ISO/TS Abstract test suite members, non-members EPL/278 ISO/TS :2012 Electronic fee collection. Evaluation of equipment for conformity to ISO/TS Test suite structure and test purposes members, non-members EPL/278 ISO/TS :2012 (CD-ROM) Electronic fee collection. Evaluation of equipment for conformity to ISO/TS Abstract test suite members, non-members EPL/278 ISO/TS :2012 (CD-ROM) Electronic fee collection. Evaluation of equipment for conformity to ISO/TS Abstract test suite members, non-members EPL/278 ISO/TS :2012 (CD-ROM) Electronic fee collection. Evaluation of equipment for conformity to ISO/TS Abstract test suite members, non-members EPL/278 ISO :2012 Fire safety engineering. Fire risk assessment. General members, non-members FSH/24 ISO/IEC 17020:2012 Conformity assessment. Requirements for the operation of various types of bodies performing inspection members, non-members CAS/1 ISO 17212:2012 Structural adhesives. Guidelines for the surface preparation of metals and plastics prior to adhesive bonding members, non-members PRI/52 ISO/TS :2012 Road vehicles. Connection interface for pyrotechnic devices, two-way and three-way connections. Pyrotechnic device and harness connector assembly. Type members, non-members AUE/16 ISO/IEC/IEEE :2012 Information technology. Smart transducer interface for sensors and actuators. Transducer to radio frequency identification (RFID) systems communication protocols and Transducer Electronic Data Sheet (TEDS) formats members, non-members IST/34 Will not be implemented as a British Standard ISO :2012 Smoke and heat control systems. Specification for control equipment members, non-members FSH/25 ISO :2012 Personal equipment for protection against falls. Rope access systems. Code of practice members, non-members PH/5 ISO :2012 Industrial trucks. Verification of stability. Roughterrain trucks with mast members, non-members MHE/7 ISO/IEC 23271:2012 (Edition 3) Information technology. Common Language Infrastructure (CLI) members, non-members IST/5 Will not be implemented as a British Standard ISO 23599:2012 Assistive products for blind and vision-impaired persons. Tactile walking surface indicators members, non-members CH/173 Will not be implemented as a British Standard ISO : Refrigerated display cabinets. Vocabulary AMENDMENT 1:February 2012 to ISO : members, non-members RHE/19 ISO : Refrigerated display cabinets. Classification, requirements and test conditions AMENDMENT 1:February 2012 to ISO : members, non-members RHE/19 ISO :2012 Optics and photonics. Electronic exchange of optical data. NODIF information model members, non-members CPW/172/1 ISO/IEC 28360:2012 Information technology. Office equipment. Determination of chemical emission rates from electronic equipment members, non-members IST/3 Will not be implemented as a British Standard ISO/TS 28581:2012 Water quality. Determination of selected nonpolar substances. Method using gas chromatography with mass spectrometric detection (GC-MS) members, non-members EH/3/2 ISO/PAS PUBLICATIONS ISO/PAS :2012 Acoustics. Quantities and procedures for description and measurement of underwater sound from ships. General requirements for measurements in deep water members, non-members EH/1/7 46 Prices may be subject to change. Update Standards April 2012

47 AASHTO LRFD Bridge Design Specifications Seismic design shall be in accordance with either the provisions in these Specifications or those given in the AASHTO Guide Specifications for LRFD Seismic Bridge Design. Construction specifications consistent with these design specifications are the AASHTO LRFD Bridge Construction Specifications. Unless otherwise specified, the Materials Specifications referenced herein are the AASHTO Standard Specifications for Transportation Materials and Methods of Sampling and Testing. Mechanical, electrical, and special vehicular and pedestrian safety aspects of movable bridges are not included in this specification. There have been significant updates made in the following areas: Elastimeric bearing design Foundations within seismic design Horizontally curved concrete box girder design Design of sound barriers (newly added section) Bridge piers and abutments for vehicle collisions designs Special shear resistance factor for lightweight concrete, clarifications for partially pre-stressed concrete beams Curved post-tensioned box girder bridges Steel deck design and simplified equations for nominal flexural resistance of unstiffened box flanges in compression, and MSE wall design For more information or to purchase please contact us quoting marketing reference AASHTO-US1204 Tel Fax raising standards worldwide BSI Knowledge Centre Your standards resource BSI Knowledge Centre provides the following services to BSI Members: information on the status, availability, scope and coverage of standards detailed database searches across current and withdrawn standards response within 1 working day borrow a wide selection of international and foreign standards consult databases, journals and standards in our member study area. Contact us to arrange a visit For more information contact the BSI Knowledge Centre: Tel +44 (0) Fax +44 (0) knowledgecentre@bsigroup.com a comprehensive collection of withdrawn British Standards available to view and purchase in PDF and hardcopy raising standards worldwide

48 New standard BS 8572:2011 Procurement of facility-related services. Guide Best practice procurement strategies aligned with your business needs. The standard provides clients/owners, operators, tenants, facility managers and property managers with guidance and recommendations for the procurement of a broad range of services that are required to support the physical assets making up a facility and the needs of users of that facility. It covers both new and existing facilities and is applicable to organisations facing re-tendering of facility-related services as well as those entering directly into the later stages of the procurement process, notably mobilisation and performance review. One of the key features of the standard is its comprehensive checklist. This has been designed to help focus attention on what needs to be done to ensure that procurement is undertaken in accordance with current best practice. As a standard, its place is to recommend appropriate practices and provide a baseline against which performance, in compliance with it, can be measured. The standard considers all stages in procurement from aligning with the client s/owner s business needs, through strategy development and prequalification of service providers, to tenders, contract award, mobilisation and performance review. Its recommendations are supported by explanatory notes, so users of the standard will not be left wondering what they have to do to achieve best practice and to comply with the standard. The benefits of using the standard include: Providing a consistent way of working a roadmap for successful procurement Confidence that services are defined in accordance with needs Transparency in operating competitive tendering Rigorous evaluation of service providers prior to tendering Thoroughness in the evaluation of tenders/proposals Comprehensiveness in preparations for initial service delivery Appropriate levels of performance review feedback on effectiveness. To contact us visit or contact BSI Customer Services quoting marketing reference code BS8572-US1204 Tel +44 (0) Fax +44 (0) orders@bsigroup.com raising standards worldwide Standards and publications may also be ordered via the BSI shop at *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0) BSI British Standards Institution 2012