STANDARDS February UPDATE. Revised standard. Online version. BS 3998 Tree work. Recommendations Updated and expanded *

Transcription

1 UPDATE STANDARDS February Online version UpdateStandardsOnline 2011 Contents Revised standard 4 Quick Reference Guide 8 New and revised British Standards 8 BS EN and DD ENV publications 12 British Standard implementations 14 Published Documents 15 Drafts for Development 15 Publicly Available Specifications 15 Corrigenda to British Standards 16 Updated British Standards 17 Special Announcements 17 British Standards confirmed 20 British Standards declared obsolescent 21 British Standards withdrawn 23 New work started 28 Draft British Standards 34 Documents not issued as DPCs 35 CEN publications 36 CENELEC publications 39 IEC publications 42 ISO publications BS 3998 Tree work. Recommendations Updated and expanded * *See back cover for more information raising standards worldwide

2 Customer Services Your first point of contact 9 am to 5 pm GMT Monday to Friday Call Customer Services now: To purchase standards and publications For further information on standards, publications and our services To find out about BSI Membership To reserve your place on one of our seminars and conferences. Help us give you the best customer service If you have done business with us before, please quote your account number When phoning, always take a note of the name of the Customer Service Advisor you are speaking to If you are responding to literature please quote the reference code. How to order Telephone +44 (0) Website orders@bsigroup.com to place an order info@bsigroup.com to make an enquiry Fax +44 (0) Post BSI Customer Services 389 Chiswick High Road London W4 4AL We welcome all your feedback, please contact us with your comments. Your calls may be recorded and/or monitored to help us improve our service to you. **ATTENTION BSI MEMBERS** If you are a BSI Member you can order on your credit account. Standards and publications may also be ordered via the BSI shop at *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0) BSI British Standards Institution 2011

3 +44 (0) Plan to reduce your spending in 2011? BSI Membership now with added benefits Become a BSI Member and get up to 50% off conference prices and standards. Membership entitles you to an exclusive range of services aimed at helping your business to prosper, including: 50% off BS hardcopy standards 50% off the subscription of our flagship information product, British Standards Online (BSOL) 50% off many BSI conferences Discounts off foreign standards (40% off ISO,10% off DIN, ASTM etc) Free p&p and credit facilities. Join BSI today and you'll spend less every time you book a place at one of our conferences. Find out more and join at BSI Conferences Check out our conferences website for more details of BSI events, including: Financial Services Compliance Sustainable Materials Supply Chain Security Energy Management Read more and book at Biometrics Information Security Information Governance. raising standards worldwide

4 British Standards - Quick Reference Guide The following British Standards are listed or referred to in this issue of Update Standards with the exception of those in New Work Started. Building and civil engineering BS BS BS BS BS BS , 22 DD , 22 BS EN BS EN BS EN BS EN BS EN ISO BS ISO PD CEN/TR PD CEN/TR PD , 23 PD Consumer products and services BS BS , 21 BS , 22 BS BS EN ISO , 22 BS EN ISO BS ISO BS ISO Electrotechnical BS BS , 22 BS BS BS EN BS EN BS EN , 22 BS EN BS EN BS EN BS EN BS EN BS EN BS EN , 17, 23 BS EN BS EN BS EN , 23 BS EN , 23 BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN , 23 BS EN BS EN BS EN BS EN BS EN , 23 BS EN BS EN , 22 BS EN BS ISO BS IEC , 22 BS IEC BS IEC DD ISO/TS DD IEC/PAS , 23 PD PD CLC/TR PD IEC/TR PD IEC/TR Engineering BS BS BS BS , 22 BS BS BS BS BS BS BS BS BS , 22 BS BS BS BS BS BS BS BS , 20 BS BS BS BS BS BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN , 23 BS EN BS EN , 23 BS EN ISO BS EN BS EN BS EN BS EN BS EN BS EN ISO BS EN BS EN BS EN , 22 BS EN BS EN ISO , 22 BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN ISO BS EN BS EN ISO , 22 BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN , 22 BS EN BS EN BS EN BS EN ISO BS EN ISO BS ISO , 22 BS ISO , 22 BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO PD CEN/TR BS 4L BS L BS AU BS AU BS AU BS AU BS AU 162a...20 Health and environment BS , 22 BS , 16 BS BS DD CEN/TS BS EN BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN BS EN ISO BS EN ISO BS EN BS EN ISO BS EN ISO , 22 BS EN BS EN BS ISO Prices may be subject to change. Update Standards Feb 2011

5 British Standards - Quick Reference Guide continued... BS ISO BS IEC PD CEN/TR Information systems BS BS BS BS BS BS BS BS BS BS ISO/IEC BS ISO/IEC BS ISO/IEC BS ISO/IEC BS ISO/IEC PD PD PD PD PD PD PD PD PD PD PD ISO/TR PD ISO/IEC TR PD ISO/IEC TR Management systems PD Materials and chemicals BS BS BS BS , 21 BS BS BS BS BS BS BS 282; BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS EN ISO BS EN BS EN BS EN ISO BS EN ISO , 22 BS EN ISO , 22 BS EN ISO BS EN BS EN , 10, 22 BS EN BS EN , 22 BS EN BS EN ISO , 22 BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO DD ISO/TS PD ISO/TR Alpha-numeric sequence of British Standards quoted in this issue BS BS BS BS BS BS BS BS , 21 BS BS , 21 BS BS BS BS BS BS BS 282; BS BS BS BS BS BS BS BS , 22 BS BS BS BS BS BS BS BS BS BS BS , 22 BS BS BS BS BS BS , 22 BS BS BS BS BS BS BS BS BS BS BS BS , 22 BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS , 20 BS BS BS BS BS BS BS BS BS BS BS BS , 16 BS Update Standards Feb 2011 Prices may be subject to change. 5

6 Alpha-numeric sequence of British Standards continued... BS BS BS BS , 22 BS BS BS BS BS BS BS BS BS BS BS BS , 22 DD , 22 DD CEN/TS BS EN BS EN ISO BS EN BS EN ISO , 22 BS EN BS EN BS EN BS EN BS EN BS EN BS EN ISO BS EN ISO BS EN ISO , 22 BS EN BS EN BS EN BS EN , 23 BS EN BS EN ISO BS EN , 23 BS EN ISO BS EN BS EN BS EN BS EN BS EN BS EN ISO BS EN ISO , 22 BS EN ISO BS EN ISO BS EN BS EN BS EN , 22 BS EN ISO BS EN ISO BS EN BS EN ISO , 22 BS EN BS EN , 10, 22 BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN ISO BS EN BS EN ISO BS EN BS EN BS EN ISO , 22 BS EN BS EN BS EN ISO BS EN BS EN BS EN , 22 BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN , 22 BS EN BS EN BS EN BS EN BS EN BS EN BS EN ISO BS EN ISO BS EN ISO BS EN ISO , 22 BS EN ISO BS EN ISO BS EN ISO , 22 BS EN BS EN BS EN , 22 BS EN BS EN BS EN BS EN BS EN BS EN BS EN , 17, 23 BS EN BS EN BS EN , 23 BS EN , 23 BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN , 23 BS EN BS EN BS EN BS EN BS EN , 23 BS EN BS EN , 22 BS EN BS ISO , 22 BS ISO BS ISO/IEC BS ISO BS ISO BS ISO BS ISO , 22 BS ISO BS ISO BS ISO BS ISO/IEC BS ISO BS ISO BS ISO/IEC BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO/IEC BS ISO BS ISO BS ISO BS ISO BS ISO/IEC BS ISO BS IEC , 22 BS IEC BS IEC BS IEC DD ISO/TS DD ISO/TS DD IEC/PAS , 23 PD PD CEN/TR PD CEN/TR PD CEN/TR PD CEN/TR PD PD PD PD PD PD PD PD PD PD PD PD , 23 PD PD ISO/TR PD ISO/TR PD ISO/IEC TR PD ISO/IEC TR PD CLC/TR PD IEC/TR PD IEC/TR BS 4L BS L BS AU BS AU BS AU BS AU BS AU 162a...20 PAS Prices may be subject to change. Update Standards Feb 2011

7 New Standard BS 8878:2010 Web accessibility. Code of practice has been designed to introduce non-technical professionals to accessibility, usability and user experience for disabled and older people. If you want to ensure any web product you commission or design is accessible for all, then this new standard will help you. BS 8878 is the first British Standard to address the growing challenge of digital inclusion. It will be especially beneficial to anyone new to this subject as it gives guidance on process, rather than on technical and design issues. BS 8878 is also cited in the Department for Business s new e-accessibility Action Plan and is the basis for updated government advice on making websites more accessible. Both the public and private sector can benefit from this new standard. There are three main reasons for organizations and businesses to take steps to make their web products more accessible and usable: Commercial reasons as this standard will allow site owners to reach a wider audience for their products and services, opening up new markets and opportunities Ethical reasons as it will help ensure that disabled and older people are not excluded from the benefits of the digital age, and are able to use new technologies to increase their ability to live independently, and to be fully engaged members of society Legal reasons as many web products unwittingly and unlawfully exclude disabled and older people; yet in most cases the barriers these web products present can be removed. BS 8878 provides guidance on how to remove the barriers to inclusion and highlights a simple truth: if accessibility is built-in, it s a win - win for site owners and users. Read more and buy at To buy online visit or contact BSI Customer Services quoting marketing reference code BS8878B-U Tel +44 (0) Fax +44 (0) orders@bsigroup.com raising standards worldwide Standards and publications may also be ordered via the BSI shop at *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0) BSI British Standards Institution 2011

8 British Standards BRITISH STANDARDS The following British Standard publications are available from BSI Customer Services (see How to order on page 2). The publications listed below are new and revised British Standards that were made available last month. An existing BSI publication bearing a number identical to one announced below is automatically withdrawn unless stated otherwise. In all other cases of supersession, details are given and a corresponding entry appears in the British Standards withdrawn section. BRITISH STANDARD IMPLEMENTATIONS WILL BE SUPPLIED IN PREFERENCE TO EUROPEAN OR INTERNATIONAL STANDARDS, UNLESS OTHERWISE REQUESTED. Please order by the British Standard reference not the ISBN number. BS 2000 series standards are also available from: Library of the Energy Institute 61 New Cavendish Street London W1G 7AR Tel: Fax: lis@energyinst.org.uk For this series, member pricing is applicable to BSI and Energy Institute members. BS 1134:2010 Assessment of surface texture. Guidance and general information supersedes BS :1988 and BS :1990 ISBN members, non-members TDW/4 BS 3998:2010 Tree work. Recommendations supersedes BS 3998:1989 ISBN members, non-members B/213 BS 4933:2010 Specification for ISO metric black cup and countersunk head bolts and screws with hexagon nuts supersedes BS 4933:1973 ISBN members, non-members FME/9/1 BS :2010 Code of practice for the design and installation of natural stone cladding and lining. General supersedes BS 8298:1994 which remains current ISBN members, non-members B/545 BS :2010 Code of practice for the design and installation of natural stone cladding and lining. Traditional handset external cladding supersedes BS 8298:1994 which remains current ISBN members, non-members B/545 BS :2010 Code of practice for the design and installation of natural stone cladding and lining. Stonefaced pre-cast concrete cladding systems supersedes BS 8298:1994 which remains current ISBN members, non-members B/545 BS :2010 Code of practice for the design and installation of natural stone cladding and lining. Rainscreen and stone on metal frame cladding systems supersedes BS 8298:1994 which remains current ISBN members, non-members B/545 BS 8537:2010 Copper and copper alloys. Plumbing fittings. Specification for press ends of plumbing fittings for use with metallic tubes ISBN members, non-members NFE/34/3 BS 8580:2010 Water quality. Risk assessments for Legionella control. Code of practice ISBN members, non-members EH/3/4 BS :2010 Asphalt for roads and other paved areas. Specification for transport, laying, compaction and type testing protocols supersedes BS :2007 and DD 232:2005 ISBN members, non-members B/510/1 BS EN PUBLICATIONS The following are British Standard implementations of the English language versions of European Standards (ENs). BSI has an obligation to publish all ENs and to withdraw any conflicting British Standards. This has led to a series of standards, BS ENs, using the EN number. Note: The date referenced in the identifier is the date of the European standard. BS EN 326-2:2010 Wood-based panels. Sampling, cutting and inspection. Initial type testing and factory production control supersedes BS EN 326-2:2000 ISBN members, non-members B/541 BS EN ISO 520:2010 Cereals and pulses. Determination of the mass of 1000 grains supersedes BS :1980 ISBN members, non-members AW/4 BS EN 1147:2010 Portable ladders for fire service use supersedes BS EN 1147:2001 ISBN members, non-members FSH/17/9 BS EN ISO :2010 Plastics. Polyamide (PA) moulding and extrusion materials. Designation system and basis for specification supersedes BS EN ISO :2001 ISBN members, non-members PRI/82 BS EN ISO 1942:2010 Dentistry. Vocabulary supersedes BS EN ISO 1942:2009 ISBN members, non-members CH/106 BS EN ISO 2143:2010 CD-ROM Anodizing of aluminium and its alloys. Estimation of loss of absorptive power of anodic oxidation coatings after sealing. Dye-spot test with prior acid treatment supersedes BS EN :1998 ISBN members, non-members STI/32 BS EN 2283:2010 Aerospace series. Testing of aircraft wiring supersedes BS EN 2283:1996 ISBN members, non-members ACE/6 8 Prices may be subject to change. Update Standards Feb 2011

9 New standard BS ISO 26000:2010 Guidance on social responsibility Are you meeting the expectations of your customers and stakeholders when it comes to social responsibility? Like it or not, the way your organization affects the environment and wider society is now a major part of your brand. Companies that embrace these challenges are finding they: Increase their brand's value Attract and retain the best staff Gain a competitive advantage. There is widespread demand for both public and private sector organizations to behave in a more socially responsible way, but what exactly does social responsibility (SR) mean, and how do you achieve it? BS ISO will help answer these questions by providing guidelines for social responsibility. The standard covers issues such as organizational governance, human rights, labour practices, the environment, fair operating practices, consumer issues, and community involvement and development. This standard is aimed at all professionals who have social responsibility as part of their remit, including: Heads of corporate social responsibility Directors of communications Heads of sustainability Directors of quality Supply chain and partnership managers Heads of corporate affairs Directors of governance Chief executives Managing directors Chief operating officers. It is meant for all organizations in the private, public and non-profit sectors, whether operating in developed or developing countries. Read more and buy at To buy online visit or contact BSI Customer Services quoting marketing reference code 26000B-U Tel +44 (0) Fax +44 (0) orders@bsigroup.com raising standards worldwide Standards and publications may also be ordered via the BSI shop at *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0) BSI British Standards Institution 2011

10 BS EN Publications continued... BS EN :2010 Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 C to 175 C continuous, 200 C continuous, 260 C peak. Plug with integrated accessory. Product standard ISBN members, non-members ACE/6 BS EN ISO 3746:2010 Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound pressure. Survey method using an enveloping measurement surface over a reflecting plane supersedes BS EN ISO 3746:2009 ISBN members, non-members EH/1/4 BS EN ISO 4063:2010 Welding and allied processes. Nomenclature of processes and reference numbers supersedes BS EN ISO 4063:2009 ISBN members, non-members WEE/1 BS EN :2010 Aerospace series. Cables, optical 125 µm diameter cladding. Semi-loose, ruggedized simplex construction 62,5/125 µm GI fibre nominal 2,74 mm, outside diameter. Product standard ISBN members, non-members ACE/6 BS EN :2010 Aerospace series. Cables, optical 125 µm diameter cladding. Semi-loose, ruggedized duplex construction 62,5/125 µm GI fibre nominal, 4,95 mm outside diameter. Product standard ISBN members, non-members ACE/6 BS EN :2010 Aerospace series. Cables, optical 125 µm diameter cladding. Semi-loose, ruggedized quadraxial construction 62,5/125 µm GI fibre nominal, 5,72 mm outside diameter. Product standard ISBN members, non-members ACE/6 BS EN 4656:2010 Aerospace series. Steel FE-PM1507 (X1CrNiMoAlTi ). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bars. a or D 200 mm. Rm 1520 MPa ISBN members, non-members ACE/61/-/15 BS EN 4670:2010 Aerospace series. Steel FE-PM1507 (X1CrNiMoAlTi ). Vacuum induction melted and consumable electrode remelted. Softened. Forging stock. a or D 300 mm ISBN members, non-members ACE/61/-/15 BS EN 4671:2010 Aerospace series. Steel FE-PM1506 (X1CrNiMoAlTi ). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D 200 mm. Rm 1400 MPa ISBN members, non-members ACE/61/-/15 BS EN :2010 Aerospace series. Titanium and titanium alloys. Technical specification. Pre-production and production castings ISBN members, non-members ACE/61/-/49 BS EN ISO 7291:2010 Gas welding equipment. Pressure regulators for manifold systems used in welding, cutting and allied processes up to 30 MPa (300 bar) supersedes BS EN ISO 7291:2001 ISBN members, non-members WEE/18 BS EN ISO 7668:2010 Anodizing of aluminium and its alloys. Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20 degrees, 45 degrees, 60 degrees or 85 degrees supersedes BS EN :2001 ISBN members, non-members STI/32 BS EN ISO :2010 Injection containers and accessories. Injection caps made of aluminium-plastics combinations without overlapping plastics part ISBN members, non-members CH/212 BS EN ISO :2010 Ergonomics of human-system interaction. Guidance on software individualization ISBN members, non-members PH/9 BS EN 10029:2010 Hot-rolled steel plates 3 mm thick or above. Tolerances on dimensions and shape supersedes BS EN 10029:1991 ISBN members, non-members ISE/103 BS EN 10051:2010 Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels. Tolerances on dimensions and shape supersedes BS EN 10051:1991+A1:1997 ISBN members, non-members ISE/103 BS EN 10169:2010 Continuously organic coated (coil coated) steel flat products. Technical delivery conditions supersedes BS EN :2003, BS EN :2006 and BS EN :2003 ISBN members, non-members ISE/109 BS EN ISO 10717:2010 Footwear. Test method for slide fasteners. Burst strength ISBN members, non-members TCI/69 BS EN ISO 11986:2010 Ophthalmic optics. Contact lenses and contact lens care products. Determination of preservative uptake and release supersedes the dual numbered standard BS EN ISO 11986:2001, BS :2001 ISBN members, non-members CH/172/9 BS EN ISO 12100:2010 Safety of machinery. General principles for design. Risk assessment and risk reduction supersedes BS EN ISO :2003+A1:2009, BS EN ISO :2003+A1:2009 and BS EN ISO :2007 ISBN members, non-members MCE/3 BS EN 13236:2010 Safety requirements for superabrasive products supersedes BS EN 13236:2001 ISBN members, non-members MTE/13 BS EN 13313:2010 Refrigerating systems and heat pumps. Competence of personnel supersedes BS EN 13313:2001 ISBN members, non-members RHE/18 10 Prices may be subject to change. Update Standards Feb 2011

11 BS EN ISO 13341:2010 Gas cylinders. Fitting of valves to gas cylinders supersedes BS EN ISO 13341:1998 ISBN members, non-members PVE/3 BS EN ISO 13943:2010 Fire safety. Vocabulary supersedes BS EN ISO 13943:2000 ISBN members, non-members FSH/9 BS EN 14055:2010 WC and urinal flushing cisterns ISBN members, non-members B/503 BS EN :2010 Transportable gas cylinders. Refillable welded receptacles of a capacity not exceeding 150 litres. Welded carbon steel cylinders made to a design justified by experimental methods ISBN members, non-members PVE/3/3 BS EN :2010 Open data communication in building automation, controls and building management. Control network protocol. Application elements ISBN members, non-members RHE/16 BS EN 15420:2010 Gas-fired central heating boilers. Type C boilers of nominal heat input exceeding 70 kw, but not exceeding 1000 kw ISBN members, non-members GSE/29 BS EN :2010 Railway applications. Braking systems of high speed trains. Requirements and definitions ISBN members, non-members RAE/4 BS EN :2010 Railway applications. Braking systems of high speed trains. Test methods ISBN members, non-members RAE/4 BS EN 15885:2010 Classification and characteristics of techniques for renovation and repair of drains and sewers ISBN members, non-members B/505 BS EN 15930:2010 Fibres. Elasticity of fibres. Test methods ISBN members, non-members TCI/24 BS EN 16156:2010 Cigarettes. Assessment of the ignition propensity. Safety requirement ISBN members, non-members FSH/21/15 BS EN ISO :2010 Building automation and control systems (BACS). Project specification and implementation ISBN members, non-members RHE/16 BS EN ISO 17633:2010 Welding consumables. Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels. Classification supersedes BS EN ISO 17633:2006 ISBN members, non-members WEE/39 BS EN ISO 20072:2010 Aerosol drug delivery device design verification. Requirements and test methods ISBN members, non-members CH/84 BS EN ISO 20349:2010 Personal protective equipment. Footwear protecting against thermal risks and molten metal splashes as found in foundries and welding. Requirements and test method supersedes BS 4676:2005 ISBN members, non-members PH/1 BS EN ISO 23993:2010 Thermal insulation products for building equipment and industrial installations. Determination of design thermal conductivity supersedes BS EN ISO 23993:2008 ISBN members, non-members B/540 BS EN ISO 24444:2010 Cosmetics. Sun protection test methods. In vivo determination of the sun protection factor (SPF) ISBN members, non-members CW/217 BS EN ISO 28762:2010 Vitreous and porcelain enamels. Enamel coatings applied to steel for writing surfaces. Specification supersedes BS EN 14864:2005 ISBN members, non-members STI/36 BS EN :2010 Railway applications. Fixed installations. Electrical safety, earthing and the return circuit. Provisions against the effects of stray currents caused by D.C. traction systems supersedes BS EN :1999 ISBN members, non-members GEL/9/3 BS EN :2010 Railway applications. Fixed installations. Electrical safety, earthing and the return circuit. Mutual interaction of A.C. and D.C. traction systems ISBN members, non-members GEL/9/3 BS EN :2010 Lead-acid starter batteries. Properties of battery housings and handles ISBN members, non-members PEL/21 BS EN 50528:2010 Insulating ladders for use on or near low voltage electrical installations ISBN members, non-members PEL/78 BS EN 50554:2010 Basic standard for the in-situ assessment of a broadcast site related to general public exposure to radio frequency electromagnetic fields ISBN members, non-members GEL/106 To order visit Update Standards Feb 2011 Prices may be subject to change. 11

12 BS EN Publications continued... BS EN :2010 Mechanical standardization of semiconductor devices. General rules for the preparation of outline drawings of surface mounted semiconductor device packages. Measuring methods for package dimensions of small outline J-lead packages (SOJ) ISBN members, non-members EPL/47 BS EN :2010 Mechanical standardization of semiconductor devices. General rules for the preparation of outline drawings of surface mounted semiconductor device packages. Measuring methods for package dimensions of small outline packages (SOP) ISBN members, non-members EPL/47 BS EN :2010 Electric traction. Rotating electrical machines for rail and road vehicles. Machines other than electronic converter-fed alternating current motors supersedes BS EN :2000 ISBN members, non-members GEL/9/2 BS EN :2010 Measurement of quartz crystal unit parameters. Standard method for the determination of the load resonance frequency f L and the effective load capacitance C Leff using automatic network analyzer techniques and error correction ISBN members, non-members EPL/49 BS EN 60445:2010 Basic and safety principles for man-machine interface, marking and identification. Identification of equipment terminals, conductor terminations and conductors supersedes BS EN 60445:2007 and BS EN 60446:2007 ISBN members, non-members GEL/16 BS EN 61099:2010 Insulating liquids. Specifications for unused synthetic organic esters for electrical purposes supersedes BS EN 61099:1992 ISBN members, non-members GEL/10 BS EN :2010 Live working. Voltage detectors. Two-pole lowvoltage type supersedes BS EN :1999 ISBN members, non-members PEL/78 BS EN :2010 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Shock supersedes BS EN :1997 ISBN members, non-members GEL/86/2 BS EN :2010 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Thermal shocks supersedes BS EN :2007 ISBN members, non-members GEL/86/2 BS EN :2010 Electrostatics. Protection of electronic devices from electrostatic phenomena. Properties and requirements classifications for packaging intended for electrostatic discharge sensitive devices ISBN members, non-members GEL/101 BS EN :2010 Batch control. Batch production records supersedes DD IEC/PAS :2007 ISBN members, non-members GEL/65/1 BS EN :2010 Safety of transformers, reactors, power supply units and combinations thereof. Particular requirements and tests for transformers and power supply units for construction sites supersedes BS EN :2001 which remains current ISBN members, non-members PEL/96 BS EN :2010 Superconductivity. AC loss measurements. Total AC loss measurement of round superconducting wires exposed to a transverse alternating magnetic field at liquid helium temperature by a pickup coil method supersedes BS EN :2003 ISBN members, non-members L/-/90 BS EN :2010 Semiconductor devices. Time-dependent dielectric breakdown (TDDB) test for intermetal layers supersedes BS EN 62374:2007 ISBN members, non-members EPL/47 BS EN 62475:2010 High-current test techniques. Definitions and requirements for test currents and measuring systems ISBN members, non-members PEL/42 BS EN 62479:2010 Assessment of the compliance of low power electronic and electrical equipment with the basic restrictions related to human exposure to electromagnetic fields (10 MHz to 300 GHz) supersedes BS EN 50371:2002 ISBN members, non-members GEL/106 BS IMPLEMENTATIONS BS Implementations comprise the ISO or IEC text without any national deviation and with front and back cover indicating the UK committee responsible. No other information will normally be added. Note: The date referenced in the identifier is the date of the international standard. BS ISO 1143:2010 Metallic materials. Rotating bar bending fatigue testing supersedes BS :1962 ISBN members, non-members ISE/101/6 BS ISO/IEC :2010 Information technology. Programming languages. Fortran. Base language supersedes BS ISO/IEC :2004 ISBN members, non-members IST/5 BS ISO 2219:2010 Thermal insulation products for buildings. Factory-made products of expanded cork (ICB). Specification ISBN members, non-members PRI/81 BS ISO 2425:2010 Hydrometry. Measurement of liquid flow in open channels under tidal conditions supersedes BS ISO 2425:1999+A1:2003 ISBN members, non-members CPI/113/1 12 Prices may be subject to change. Update Standards Feb 2011

13 Online tool BSI Energy Management Self-assessment As consumers become increasingly concerned with energy consumption and environmental issues, it is important that you can demonstrate that you are taking steps to improve your resource efficiency and reduce your greenhouse gas emissions. BSI Energy Management Self-assessment has been developed to help organizations implement an Energy Management System (EnMS) in accordance with the new European standard BS EN 16001:2009. As part of the CRC Energy Efficiency Scheme large organizations will need to show that they are taking steps to save energy and reduce their CO2 emissions. This will help reduce the country s carbon footprint and deliver the ambitious emissions reduction targets set in the Climate Change Act BSI Energy Management Self-assessment can help you to: Reduce costs, drive efficiency, and increase your profits Reduce your organization s greenhouse gas emissions Improve your public relations by showing you are committed to a reduction in energy consumption Guide the design of your EnMS from strategy to operations and external audit, in accordance with the recognized European Standard BS EN Benchmark across your organization with comparison reports. BSI Energy Management Self-assessment takes you through the various aspects of planning, implementing, operating, checking and reviewing, recording and reporting on your EnMS system. Who should use BSI Energy Management Self-assessment This tool should be used by those concerned with energy consumption, energy efficiency and related cost reductions. BSI Energy Self-assessment Online has been designed to be implemented across all types of industry of varying sizes. It can be used as the first step towards certification, as well as reducing your costs and energy consumption. How to subscribe BSI Energy Management Self-assessment can provide you with the confidence that your organization has implemented BS EN and that a system is in place to reduce energy consumption and costs. For further information or to subscribe, visit FREE 2 WEEK TRIAL To buy online visit or contact BSI Customer Services quoting marketing reference code EOSAB-U Tel +44 (0) Fax +44 (0) orders@bsigroup.com raising standards worldwide Standards and publications may also be ordered via the BSI shop at *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0) BSI British Standards Institution 2011

14 BS Implementations continued... BS ISO 2558:2010 Textile glass chopped-strand mats for reinforcement of plastics. Determination of time of dissolution of the binder in styrene ISBN members, non-members PRI/42 BS ISO 2889:2010 Sampling airborne radioactive materials from the stacks and ducts of nuclear facilities supersedes BS 5243:1975 ISBN members, non-members NCE/2 BS ISO :2010 Safety devices for protection against excessive pressure. Sizing of safety valves for gas/liquid two-phase flow ISBN members, non-members PSE/18/6 BS ISO :2010 Motorcycle tyres and rims (code-designated series). Rims supersedes BS ISO :2004 ISBN members, non-members AUE/4 BS ISO/IEC :2010 Information technology. Security techniques. Entity authentication. Mechanisms using manual data transfer supersedes BS ISO/IEC :2005 ISBN members, non-members IST/33 BS ISO 10810:2010 Surface chemical analysis. X-ray photoelectron spectroscopy. Guidelines for analysis ISBN members, non-members CII/60 BS ISO 11349:2010 Water quality. Determination of low-volatility lipophilic substances. Gravimetric method ISBN members, non-members EH/3/2 BS ISO/IEC :2010 Information technology. Security techniques. Key management. Framework ISBN members, non-members IST/33 BS ISO 12021:2010 Road vehicles. Sensitivity to lateral wind. Openloop test method using wind generator input ISBN members, non-members AUE/15 BS ISO 12384:2010 Aerospace. Requirements for digital equipment for measurements of aircraft electrical power characteristics ISBN members, non-members ACE/6 BS ISO :2010 Image technology colour management. Architecture, profile format and data structure. Based on ICC.1:2010 supersedes BS ISO :2005 ISBN members, non-members PAI/43 BS ISO 16163:2010 Continuously hot-dipped coated steel sheet products. Dimensional and shape tolerances supersedes BS ISO 16163:2005 ISBN members, non-members ISE/109 BS ISO/IEC :2010 Information technology. Radio frequency identification for item management. Parameters for air interface communications at 860 MHz to 960 MHz supersedes BS ISO/IEC :2004 ISBN members, non-members IST/34 BS ISO :2010 Workplace atmospheres. Determination of inorganic acids by ion chromatography. Hydrofluoric acid and particulate fluorides ISBN members, non-members EH/2/2 BS ISO 21507:2010 Earth-moving machinery. Performance requirements for non-metallic fuel tanks supersedes BS ISO 21507:2005 ISBN members, non-members B/513/1 BS ISO 24102:2010 Intelligent transport systems. Communications access for land mobiles (CALM). Management ISBN members, non-members EPL/278 BS ISO/IEC :2010 Information technology. Radio frequency identification (RFID) for item management. Software system infrastructure. Architecture ISBN members, non-members IST/34 BS ISO 24917:2010 Space systems. General test requirements for launch vehicles ISBN members, non-members ACE/68/-/2 BS IEC :2005 Power transformers. Loading guide for oilimmersed power transformers supersedes BS 7735:1994 ISBN members, non-members PEL/14 BS IEC :2010 Electrostatics. Standard test methods for specific applications. Discharge shielding. Bags ISBN members, non-members GEL/101 BS IEC :2010 Mobile and fixed offshore units. Electrical installations. General requirements and conditions supersedes BS IEC :2001 ISBN members, non-members JPEL/18 PUBLISHED DOCUMENTS PD CEN/TR 614-3:2010 Safety of machinery. Ergonomic principles for the design of mobile machinery ISBN members, non-members PH/9 PD :2010 Background paper to the National Annexes to BS EN and BS EN supersedes PD 6687:2006 ISBN members, non-members B/525/2 PD 6691:2010 Guidance on the use of BS EN Bituminous mixtures. Material specifications supersedes PD 6691:2007 ISBN members, non-members B/510/1 14 Prices may be subject to change. Update Standards Feb 2011

15 PD ISO/TR 12802:2010 Nanotechnologies. Model taxonomic framework for use in developing vocabularies. Core concepts ISBN members, non-members NTI/1 PD ISO/TR 13028:2010 Information and documentation. Implementation guidelines for digitization of records ISBN members, non-members IDT/2/17 PD CEN/TR 16045:2010 Construction products. Assessment of release of dangerous substances. Content of regulated dangerous substances. Selection of analytical methods ISBN members, non-members B/557 PD CEN/TR 16061:2010 Gas meters. Smart gas meters ISBN members, non-members GSE/25 PD CEN/TR 16098:2010 Construction products. Assessment of release of dangerous substances. Concept of horizontal testing procedures in support of requirements under the CPD ISBN members, non-members B/557 PD ISO/IEC TR :2010 Information technology. Service management. Process reference model ISBN members, non-members IST/15/-/8 PD ISO/IEC TR 29125:2010 Information technology. Telecommunications cabling requirements for remote powering of terminal equipment ISBN members, non-members TCT/7 PD IEC/TR :2010 (PD 88-5:2010) Low-voltage fuses. Guidance for the application of low-voltage fuses ISBN members, non-members PEL/32 PD IEC/TR :2010 Safety of laser products. Safety aspects for use of passive optical components and optical cables in high power optical fibre communication systems ISBN members, non-members EPL/76 DRAFTS FOR DEVELOPMENT DD ISO/TS 11251:2010 Nanotechnologies. Characterization of volatile components in single-wall carbon nanotube samples using evolved gas analysis/gas chromatograph-mass spectrometry ISBN members, non-members NTI/1 DD CEN/TS 15989:2010 Firefighting vehicles and equipment. Symbols for operator controls and other displays ISBN members, non-members FSH/17/9 DD ISO/TS 25114:2010 Intelligent transport systems. Probe data reporting management (PDRM) ISBN members, non-members EPL/278 PUBLICLY AVAILABLE SPECIFICATIONS Publicly Available Specifications (formerly Product Assessment Specifications) are issued to provide an interim document where there is a market need but where a full British or European Standard has yet to be published. PAS 2016:2010 New generation access for new build homes. Guide ISBN Available for free of charge download from British Standards Online at CORRIGENDA TO BRITISH STANDARDS Most amendments are not issued separately. Those that make significant changes to a standard are incorporated into the standard which is reissued (see Updated British Standards ). British Standards which have been corrected via corrigenda are available on request, free of charge to past purchasers of the standard. All amendments and corrigenda to date of despatch are included within any main publication when ordered for the first time. The following corrigenda to British Standards were made available last month. BS :2010 Maritime works. Code of practice for the design of quay walls, jetties and dolphins CORRIGENDUM 1 CB/502 BS 8488:2009+A1:2010 Prefabricated wiring systems intended for permanent connection in fixed installations. Specification CORRIGENDUM 1 PEL/23 Also incorporates Amendment 1 BS EN 2398:2008 Aerospace series. Heat resisting steel FE-PA2601 (X6NiCrTiMoV26-15). Rm = 900 MPa. Bars for machined bolts. D = 25 mm CORRIGENDUM 1 ACE/61/-/15 BS EN 2399:2008 Aerospace series. Heat resisting steel FE-PA2601 (X4NiCrTiMoV26-15). Rm 900 MPa. Bars for forged bolts. D 25 mm CORRIGENDUM 1 ACE/61/-/15 BS EN 2703:2005 Aerospace series. Aluminium alloy AL-P2024-T4 or T42. Clad sheet and strip. 0,3 mm a 6 mm CORRIGENDUM 1 ACE/61/-/24 BS EN 4004:2007 Aerospace series. Aluminium alloy AL-P3103- H16. Sheet and strip. 0,4 mm a 6 mm CORRIGENDUM 1 ACE/61/-/24 BS EN :2009 Fixed firefighting systems. Foam systems. Design, construction and maintenance CORRIGENDUM 3 FSH/18/7 Also incorporates Corrigenda 1 & 2 Update Standards Feb 2011 Prices may be subject to change. 15

16 Corrigenda to British Standards continued... BS EN 15532:2008 Cycles. Terminology CORRIGENDUM 3 GME/25 Also incorporates Corrigenda 1 & 2 BS EN 55020:2007 Sound and television broadcast receivers and associated equipment. Immunity characteristics. Limits and methods of measurement CORRIGENDUM 2 GEL/210/11 Also incorporates Corrigenda 1 BS EN :2010 Household and similar electrical appliances. Safety. Particular requirements for refrigerating appliances, ice-cream appliances and ice makers CORRIGENDUM 1 CPL/61/3 BS EN :2006 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations. Particular requirements for connecting boxes and enclosures CORRIGENDUM 2 PEL/23 Also incorporates Corrigenda 1 BS EN :2002+A1:2008 Integrated circuits. Measurement of electromagnetic emissions, 150 khz to 1 GHz. Measurement of conducted emissions. Magnetic probe method CORRIGENDUM 1 EPL/47 Also incorporates Amendment 1 PD CLC/TR 50451:2007 Railway applications. Systematic allocation of safety integrity requirements CORRIGENDUM 1 GEL/9/1 UPDATED BRITISH STANDARDS The following standards have been amended and the amendments have been incorporated into an updated standard. NOTE: Updated British Standards must be reordered as the amendments are not available separately. BS 7195:1989+A1:2010 Guide for prevention of corrosion of metals caused by vapours from organic materials members, non-members PKW/0 BS EN :2008+A2:2010 Domestic cooking appliances burning gas. Safety. General AMENDMENT members, non-members GSE/35 Also incorporates Amendment 1 BS EN 619:2002+A1:2010 Continuous handling equipment and systems. Safety and EMC requirements for equipment for mechanical handling of unit loads members, non-members MHE/9 Also incorporates Corrigenda 1 BS EN :1998+A1:2010 Safety of industrial trucks. Electrical requirements. Specific requirements for the electric power transmission systems of internal combustion engine powered trucks members, non-members MHE/7 BS EN 1447:2009+A1:2010 Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of long-term resistance to internal pressure members, non-members PRI/88/2 BS EN 12042:2005+A1:2010 Food processing machinery. Automatic dividers. Safety and hygiene requirements members, non-members MCE/3/5 BS EN :2005+A2:2010 Gas meters. Conversion devices. Volume conversion AMENDMENT members, non-members GSE/25 Also incorporates Amendment 1 BS EN :2006+A1:2010 Thermal solar systems and components. Solar collectors. General requirements members, non-members RHE/25 Also incorporates Corrigenda 1 BS EN 13103:2009+A1:2010 Railway applications. Wheelsets and bogies. Non-powered axles. Design method members, non-members RAE/3/-/1 Also incorporates Corrigenda 1 BS EN 13104:2009+A1:2010 Railway applications. Wheelsets and bogies. Powered axles. Design method members, non-members RAE/3/-/1 Also incorporates Corrigenda 1 BS EN :2003+A1:2010 Cranes. Equipment. Electrotechnical equipment members, non-members MHE/3/1 Also incorporates Corrigenda 1 BS EN :2004+A1:2010 Cranes. Equipment. Non-electrotechnical equipment members, non-members MHE/3/1 Also incorporates Corrigenda 1 BS EN 13260:2009+A1:2010 Railway applications. Wheelsets and bogies. Wheelsets. Product requirements members, non-members RAE/3/-/1 BS EN 13261:2009+A1:2010 Railway applications. Wheelsets and bogies. Axles. Product requirements members, non-members RAE/3/-/1 BS EN :2006+A1:2010 Railway applications. Aerodynamics. Requirements and test procedures for aerodynamics in tunnels members, non-members RAE/1/-/4 BS EN 14601:2005+A1:2010 Railway applications. Straight and angled end cocks for brake pipe and main reservoir pipe members, non-members RAE/4 BS EN ISO 14729:2001+A1:2010 (BS :2001) Ophthalmic optics. Contact lens care products. Microbiological requirements and test methods for products and regimens for hygienic management of contact lenses members, non-members CH/172/9 BS EN 14733:2005+A1:2010 Bitumen and bituminous binders. Bituminous emulsions, fluxed and cut-back bitumen factory production control members, non-members B/510/19 16 Prices may be subject to change. Update Standards Feb 2011

17 BS EN :2006+A1:2010 Railway applications. Air conditioning for driving cabs. Comfort parameters members, non-members RAE/1/-/6 BS EN :2006+A1:2010 Railway applications. Air conditioning for driving cabs. Type tests members, non-members RAE/1/-/6 BS EN :2009+A1:2010 Railway applications. Axlebox lubricating greases. Method to test the ability to lubricate members, non-members RAE/3/-/2 BS EN 15020:2006+A1:2010 Railway applications. Rescue coupler. Performance requirements, specific interface geometry and test methods members, non-members RAE/1/-/13 BS EN 15227:2008+A1:2010 Railway applications. Crashworthiness requirements for railway vehicle bodies members, non-members RAE/1/-/2 BS EN 15302:2008+A1:2010 Railway applications. Method for determining the equivalent conicity members, non-members RAE/1/-/8 BS EN 15355:2008+A1:2010 Railway applications. Braking. Distributor valves and distributor-isolating devices members, non-members RAE/4 BS EN 15611:2008+A1:2010 Railway applications. Braking. Relay valves members, non-members RAE/4 BS EN 15612:2008+A1:2010 Railway applications. Braking. Brake pipe accelerator valve members, non-members RAE/4 BS EN 60065:2002+A2:2010 Audio, video and similar electronic apparatus. Safety requirements AMENDMENT members, non-members EPL/108 Also incorporates Amendments 1 & 11 and Corrigenda 1 & 2 BS EN :2003+A11:2010 Household and similar electrical appliances. Safety. Particular requirements for vacuum cleaners and water-suction cleaning appliances members, non-members CPL/61/1 Also incorporates Amendments 1 & 2 and Corrigenda 1 BS EN :2005+A12:2010 Household and similar electrical appliances. Safety. Particular requirements for electric fence energizers members, non-members CPL/61/1 Also incorporates Amendments 1 & 11 and Corrigenda 1 BS EN :2006+A1:2010 Household and similar electrical appliances. Safety. Particular requirements for commercial microwave ovens members, non-members CPL/61/7 BS EN :2006+A1:2010 High-voltage switchgear and controlgear. Synthetic testing members, non-members PEL/17/1 BS EN :2007+A1:2010 Detail specification. Fixed low power film SMD resistors. Rectangular. Stability classes 1; members, non-members EPL/40X BS EN :2007+A1:2010 Detail specification. Fixed low power film SMD resistors. Cylindrical. Stability classes 0,05; 0,1; 0,25; 0,5; 1; members, non-members EPL/40X BS ISO :2005+A1:2010 Mechanical vibration and shock. Characterization of the dynamic mechanical properties of visco-elastic materials. Cantilever shear beam method members, non-members GME/21 Please do not send confirmation of orders placed by telephone as it can lead to duplication SPECIAL ANNOUNCEMENTS Comments can be sent by or by post to named contacts at: BSI Head Office 389 Chiswick High Road London W4 4AL Tel: BS 4994:1987 Specification for design and construction of vessels and tanks in reinforced plastics This standard was withdrawn in error, and has now been re-instated. Contact: Alex Price alex.price@bsigroup.com PRI/5/1 BS EN :1999 Safety of industrial trucks. Self-propelled trucks up to and including kg capacity and industrial tractors with a drawbar pull up to and including N. General requirements This standard was withdrawn on 28 February, 2010, on the grounds that it was superseded by BS EN ISO :2009. CEN have since confirmed that this was an error and a corrected version of BS EN ISO :2009 which removes reference to this supersession is accordingly being prepared for publication. BS EN :1999 will be re-instated as a current document in tandem with this process. Contact: Committee Service Centre csc@bsigroup.com MHE/7 BRITISH STANDARDS REVIEWED AND CONFIRMED It is BSI policy for every standard to be reviewed by the technical committee responsible not more than five years after publication, to establish whether it is still current and, if it is not, to identify and set in hand appropriate action. Confirmation indicates the continuing currency of a standard. Where any standard in this list has been amended since publication, confirmation includes all amendments published to date. Reference to a particular amendment indicates that it is published concurrently with the confirmation. BS 245:1976 Specification for mineral solvents (white spirit and related hydrocarbon solvents) for paints and other purposes STI/3 BS 388:1972 Specification for aluminium pigments STI/1 Update Standards Feb 2011 Prices may be subject to change. 17

18 British Standards Reviewed and Confirmed continued... BS 416-1:1990 Discharge and ventilating pipes and fittings, sand-cast or spun in cast iron. Specification for spigot and socket systems PSE/10 BS 525:1991 Specification for fibre cores for wire ropes TCI/77 BS :1995 Methods of analysis of fats and fatty oils. General introduction. General procedures and list of determinations in BS 684 AW/307 BS :1987 Methods of analysis of fats and fatty oils. Physical methods. Determination of cloud point AW/307 BS :1976 Methods of analysis of fats and fatty oils. Physical methods. Determination of penetration value AW/307 BS :1976 Methods of analysis of fats and fatty oils. Physical methods. Determination of cooling curve AW/307 BS 853-2:1996 Specification for vessels for use in heating systems. Tubular heat exchangers and storage vessels for building and industrial services RHE/12 BS 1006:B01C:LFS1:1982 Methods of test for colour fastness of textiles and leather. Blue wool standards. Reference standard for no. 1 TCI/81 BS 1006:B01C:LFS2:1985 Methods of test for colour fastness of textiles and leather. Blue wool standards. Reference standard for no. 2 TCI/81 BS 1006:B01C:LFS3:1989 Methods of test for colour fastness of textiles and leather. Blue wool standards. Reference standard for no. 3 TCI/81 BS 1006:B01C:LFS4:1990 Methods of test for colour fastness of textiles and leather. Blue wool standards. Reference standard for no. 4 TCI/81 BS 1006:B01C:LFS5:1988 Methods of test for colour fastness of textiles and leather. Blue wool standards. Reference standard for no. 5 TCI/81 BS 1006:B01C:LFS6:1988 Methods of test for colour fastness of textiles and leather. Blue wool standards. Reference standard for no. 6 TCI/81 BS 1006:B01C:LFS7:1985 Methods of test for colour fastness of textiles and leather. Blue wool standards. Reference standard for no. 7 TCI/81 BS 1006:B01C:LFS8:1987 Methods of test for colour fastness of textiles and leather. Blue wool standards. Reference standard for no. 8 TCI/81 BS 1103:1989 Specification for fabrics for the reinforcement of rubber hoses TCI/77 BS 1214:1977 Specification for hessian sandbags and rotproofed hessian sandbags TCI/77 BS :1988 Methods of testing refractory materials. General and textural properties. Introduction RPI/1 BS :1981 Methods of testing refractory materials. General and textural properties. Guidance on sampling RPI/1 BS :1981 Methods of testing refractory materials. General and textural properties. Measurement of dimensions of specimens for testing (methods ) RPI/1 BS :1981 Methods of testing refractory materials. General and textural properties. Sieve analysis (methods ) RPI/1 BS :1983 Methods of testing refractory materials. General and textural properties. Measurement of dimensions and shape of refractory bricks and blocks (methods ) RPI/1 BS :1996 Methods of testing refractory materials. General and textural properties. Determination of hydration tendency RPI/1 BS :1990 Methods of testing refractory materials. General and textural properties. Determination of pore size distribution (method ) RPI/1 BS :1990 Methods of testing refractory materials. General and textural properties. Determination of volume and bulk density of dense shaped products (methods ) RPI/1 BS :1994 Glossary of terms and classification relating to agricultural machinery and implements. Power and tractive units AGE/6 BS :1965 Specification for sprayed metal coatings. Protection of iron and steel against corrosion and oxidation at elevated temperatures STI/40 BS 282; 389:1963 Specifications for lead chromes and zinc chromes for paints STI/1 BS 3104:1970 Specification for polyamide (nylon) mountaineering ropes TCI/77 BS 3279:1960 Specification for seedlac STI/3 BS 3367:1999 Specification for ropes and lines for fire service use other than for rope rescue purposes TCI/77 BS 3408:1992 Specification for tarpaulins TCI/77 BS :2000 Testing coated fabrics. Index of parts TCI/69 BS :1999 Testing coated fabrics. Guide to the selection of methods for colour fastness to light testing TCI/69 BS :1995 Testing coated fabrics. Method 18. Determination of air permeability TCI/69 BS :1990 Testing coated fabrics. Methods 27A and 27B. Methods for determination of abrasion resistance TCI/69 BS :1990 Testing coated fabrics. Methods 29A, 29B, 29C and 29D. Methods for determination of resistance to water penetration and surface wetting TCI/69 BS :1995 Testing coated fabrics. Method 31. Determination of specular gloss TCI/69 BS :1998 Testing coated fabrics. Determination of wounded burst strength TCI/69 18 Prices may be subject to change. Update Standards Feb 2011

19 BS 3546:2001 Coated fabrics for use in the manufacture of water penetration resistant clothing TCI/69 BS 3566:1982 Specification for lightweight salvage sheets for fire service use TCI/77 BS 3745:1970 Method for the evaluation of results of accelerated corrosion tests on metallic coatings STI/33 BS 3761:1995 Specification for solvent-based paint remover STI/3 BS :1998 Methods of test for drying performance of agricultural grain dryers. General procedures and limited requirements for wheat AGE/32 BS :1998 Methods of test for drying performance of agricultural grain dryers. Additional procedures and crop specific requirements AGE/32 BS 4023:1975 Specification for flexible cellular PVC sheeting PRI/71 BS :1966 Recommendation for data on shielding from ionizing radiation. Shielding from gamma radiation NCE/2 BS :1971 Recommendation for data on shielding from ionizing radiation. Shielding from X-radiation NCE/2 BS 4115:1993 Specification for compression knapsack sprayers AGE/15 BS 4406:1969 Specification for the designation in the Tex system of netting yarns for fishing nets TCI/77 BS 4495:1969 Recommendations for the flame spraying of ceramic and cermet coatings STI/40 BS 4513:1969 Specification for lead bricks for radiation shielding NCE/2 BS 4639:1987 Specification for brakes and braking systems for towed agricultural vehicles AGE/32 BS 4674:1971 Methods for the determination of the breaking load and knot breaking load of netting yarns for fishing nets TCI/77 BS :1988 Hydraulic equipment for agricultural machinery. Specification for dimensions and location of agricultural tractor hydraulic return to sump porting AGE/32 BS :1989 Hydraulic equipment for agricultural machinery. Specification for port connections for agricultural trailed vehicle hydraulic brake couplings AGE/32 BS :1990 Hydraulic equipment for agricultural machinery. Method for colour coding of remote hydraulic power services and controls on agricultural tractors AGE/32 BS 4761:1971 Specification for sprayed unfused metal coatings for engineering purposes STI/40 BS 4763:1971 Methods for cutting knotted netting to shape (tapering) TCI/77 BS 4881:1993 Specification for polypropylene film cords, lines and twines TCI/77 BS 4950:1973 Specification for sprayed and fused metal coatings for engineering purposes STI/40 BS 4975:1990 Specification for prestressed concrete pressure vessels for nuclear engineering NCE/9 BS 5127:1974 Specification for polyolefin webbing for divans and bed bases TCI/77 BS :1990 Methods of test for footwear and footwear materials. Other components. Resistance of heels of ladies shoes to lateral impact TCI/69 BS :1979 Methods of test for footwear and footwear materials. Testing of complete footwear. Strength of top piece attachment to shoe heels TCI/69 BS 5398:1976 Classification of methods for mounting and joining of fishing nets TCI/77 BS 5401:1990 Guide to information content and presentation of operators manuals provided for tractors and machinery for agriculture and forestry AGE/6 BS :1990 Evaluating particulate contamination of hydraulic fluids. Method of calibrating liquid automatic particle-count instruments (using mono-sized latex spheres) MCE/18 BS 5643:1984 Glossary of refrigeration, heating, ventilating and air-conditioning terms RHE/6 BS 5742:1989 Specification for textile labels requiring to be washed and/or dry cleaned TCI/82 BS 6005:1997 Specification for moulded transparent polycarbonate bowls used in compressed air filters and lubricators MCE/18 BS 6076:1996 Specification for polymeric film for use as a protective sleeving for buried iron pipes and fittings (for site and factory application) PSE/10 BS 6131:1982 Glossary of terms relating to household sewing machines TCI/33 BS 6142:1981 Specification for presentation of technical data on hydraulic systems of agricultural tractors and machinery AGE/32 BS 6170:1981 Specification for flax canvas water buckets TCI/77 BS :1991 Industrial laundry machinery. Methods for the assessment of the effect of shaped garment finishing machinery on textiles TCI/82 BS :1989 Spraying equipment for crop protection. Specification for performance limits for field spraying nozzles AGE/15 BS :1993 Spraying equipment for crop protection. Guide for typical data sheet layout AGE/15 BS :1996 Spraying equipment for crop protection. Specification for induction hoppers AGE/15 Update Standards Feb 2011 Prices may be subject to change. 19

20 British Standards Reviewed and Confirmed continued... BS :1996 Spraying equipment for crop protection. Specification for systems for closed transfer of liquid formulations AGE/15 BS 6361:1988 Specification for three-pin plug connectors for electrically controlled fluid power equipment MCE/18 BS 6736:1986 Code of practice for hand signalling for use in agricultural operations AGE/6 BS 6894:1987 Specification for jute hessian tubing TCI/77 BS 6923:1988 Method for calculation of small colour differences TCI/81 BS 7305:1990 Method for determination of the maximum safe ironing temperature of fabrics TCI/82 BS 7411:1991 Specification for lever operated knapsack sprayers AGE/15 BS 7648:1993 Specification for double braided ropes made from man-made fibre TCI/77 BS 7940:1999 Analogue PSTN terminal support interface BS 8412:2004 Equipment for crop protection. Performance requirements for application systems used to make spatially variable applications to field crops. Specification AGE/15 BS 8432:2005 Spinal orthoses. Guide to design CH/168 BS ISO 1272:2000 Essential oils. Determination of content of phenols AW/54 BS ISO 8432:1987 Essential oils. Analysis by high performance liquid chromatography. General method AW/54 BS AU 40-4a:1966 Specification for motor vehicle lighting and signalling equipment. Sealed beam headlamps AUE/1 BS AU 47:1965 Specification for advance warning triangle to indicate temporary obstructions AUE/1 BS AU 152:1970 Specification for rear marking plates for vehicles AUE/1 BS AU 156:1971 Recommendations for aiming of headlamps and auxiliary lamps on motor vehicles AUE/1 BS AU 162a:1976 Specification for headlamp optical aiming devices AUE/1 BRITISH STANDARDS DECLARED OBSOLESCENT Declaration of obsolescence indicates that the standard is not recommended for use in new equipment but needs to be retained for the servicing of existing equipment that is expected to have a long working life. BS 31:1940 Specification. Steel conduit and fittings for electrical wiring PEL/213 BS 2656:1972 Specification for zinc anodes, zinc oxide and zinc salts for electroplating STI/33 BS 3157:1960 Specification for latex foam rubber components for transport seating PRI/71 BS 6312:1982 Specification for plugs for use with British Telecommunications line jack units. It is replaced by BS 6312:1985 BS 6312:1985 Specification for plugs for use with British Telecommunications line jack units. It is replaced by BS :1994 BS 6317:1982 Specification for simple telephones for connection to public switched telephone networks run by certain public telecommunication operators. It is replaced by BS 6317:1992 BS 6317:1992 Specification for simple telephones for connection to public switched telephone networks run by certain public telecommunications operators BS 6320:1982 Specification for modems for connection to the British Telecommunications public switched telephone network. It is replaced by BS 6320:1992 BS 6320:1992 Specification for modems for connection to public switched telephone networks and speech band private circuits run by certain public telecommunications operators BS :1985 Apparatus for connection to private circuits run by certain public telecommunication operators. Specification for apparatus for connection to baseband circuits BS :1983 Apparatus for connection to private circuits run by certain public telecommunication operators. Specification for apparatus for connection to direct current circuits BS :1985 Apparatus for connection to private circuits run by certain public telecommunication operators. Specification for apparatus for connection to telegraph circuits using SCVF signalling BS :1984 Apparatus for connection to private circuits run by certain public telecommunication operators. Specification for apparatus for connection to wideband (FDM) circuits BS 6403:1983 Specification for simple telex terminals using single channel voice frequency signalling for connection to British Telecommunications telex network 20 Prices may be subject to change. Update Standards Feb 2011

21 BS :1984 Apparatus with one or more particular functions for connection to public switched telephone networks run by certain public telecommunications operators. Specification for apparatus with loud speaking facilities BS :1992 Apparatus using cordless attachments (excluding cellular radio apparatus) for connection to analogue interfaces of public switched telephone networks. Specification for cordless telephone apparatus using radio links BS :1992 Apparatus using cordless attachments (excluding cellular radio apparatus) for connection to analogue interfaces of public switched telephone networks. Specification for the simple call routeing mode of cordless PBX operation with analogue interfaces to the PSTN and terminating stations treated as an entirety BS :1991 Apparatus using cordless attachments (excluding cellular radio apparatus) for connection to analogue interfaces of public switched telephone networks. Specification for the cordless elements within PBX apparatus with analogue interfaces to the PSTN and terminating stations treated as an entirety BS 7362:1990 Specification for telex terminal apparatus for connection to public telecommunications operators telex networks BS 9450:1998 Specification for integrated electronic circuits and micro-assemblies of assessed quality (capability approval procedures). Generic data and methods of test EPL/47 This standard is declared obsolescent as the technical content has been superseded by IEC and IEC Neither of these international standards have been implemented in the UK PD 6560:1992 A draft amendment to BS 6305:1992 Specification for general requirements for apparatus for connection to public switched telephone networks run by certain public telecommunications operators PD 6561:1992 A draft amendment to BS :1984 Apparatus with one or more particular functions for connection to the British Telecommunications public switched telephone network. Part 1. Specification for general requirements PD 6562:1992 A draft amendment to BS :1985 Apparatus with one or more particular functions for connection to the British Telecommunications public switched network. Part 3. Apparatus with auto-calling, autoanswering and auto-clearing facilities. Section 3.1. Specification for auto-calling facilities PD 6563:1992 A draft amendment to BS :1987 Apparatus with one or more particular functions for connection to certain public switched telephone networks. Part 3. Apparatus with auto-calling, auto-answering and autoclearing facilities. Section 3.2. Specification for auto-answering and auto-clearing facilities PD 6564:1992 A draft amendment to BS :1986 Apparatus with one or more particular functions for connection to certain public switched telephone networks. Part 6. Specification for series connected apparatus. Section 6.1. Apparatus having maximum allowable impairments PD 6565:1992 A draft amendment to BS :1989 Apparatus with one or more particular functions for connection to public switched telephone networks run by certain public telecommunications operators. Part 6. Specification for series connected apparatus. Section 6.2. Apparatus having less than maximum allowable impairments PD 6566:1992 A draft amendment to BS :1988 Apparatus with one or more particular functions for connection to public switched telephone networks run by certain public telecommunications operators. Part 7. Specification for apparatus with call barring facilities PD 6567:1992 A draft amendment to BS :1987 Apparatus using cordless attachments (excluding cellular radio apparatus) for connection to analogue interfaces of public switched telephone networks. Part 1. Specification for general requirements PD 6571:1992 Text for BS :1992 Apparatus with one or more particular functions for connection to public switched telephone networks run by certain public telecommunication operators. Part 2. Specification for apparatus with loudspeaking facilities PD 6572:1992 Text for BS 6833:Part 6:1992 Apparatus using cordless attachments (excluding cellular radio apparatus) for connection to analogue interfaces of public switched telephone networks. Part 6. Specification for cordless portable parts and cordless fixed parts as separate stand alone items of apparatus BRITISH STANDARDS WITHDRAWN If any standard in this list has been amended since publication, all amendments published to date are also withdrawn BS 1006:1990 Methods of test for colour fastness of textiles and leather TCI/81 This standard has been withdrawn as it is partially replaced by BS EN ISO 105-D02:1996, BS EN ISO 105-B03:1997, BS EN ISO 105-B04:1997, BS EN ISO 105-X08:1997, BS EN ISO 105-X13:1997, BS EN ISO 105-B01:1999, BS EN ISO 105-E05:1997, BS EN ISO 105-E01:1996, BS EN ISO 105-C06:1997, BS EN ISO 105-E06:1997 and BS EN ISO 105- G02:1997 BS :1988 Assessment of surface texture. Methods and instrumentation TDW/4 Superseded by BS 1134:2010 BS :1990 Assessment of surface texture. Guidance and general information TDW/4 Superseded by BS 1134:2010 Update Standards Feb 2011 Prices may be subject to change. 21

22 British Standards Withdrawn continued... BS 3284:1967 Specification for polythene pipe (Type 50) for cold water services PRI/88 This standard has been withdrawn as it is no longer relevant and has been partially replaced by BS 6572:1985 and BS 6730:1986 BS :1962 Methods of fatigue testing. Rotating bending fatigue tests ISE/NFE/4/6 Superseded by BS ISO 1143:2010 BS 3867:1987 Method of specifying outside diameters and pressure ratings for pipe of thermoplastics materials (inch series) PRI/88 This standard has been withdrawn as it is no longer relevant and has been partially replaced by BS ISO :1997 and BS :Method 1121C:1997 BS :1980 (ISO 520:1977) Methods of test for cereals and pulses. Determination of the mass of 1000 grains AW/4 Superseded by BS EN ISO 520:2010 BS 4676:2005 Protective clothing. Footwear and gaiters for use in molten metal foundries. Requirements and test methods PH/1 Superseded by BS EN ISO 20349:2010 BS 4728:1971 Method for determination of the resistance to constant internal pressure of thermoplastics pipe PRI/88 This standard has been withdrawn as it is no longer relevant and has been replaced by BS EN 921:1995 and partially replaced by BS :Method 1127P:1997 BS 5243:1975 General principles for sampling airborne radioactive materials NCE/2 Superseded by BS ISO 2889:2010 Withdrawn publications If you have questions about withdrawn titles contact the BSI Knowledge Centre +44 (0) BS :1991 (ISO 8090:1989) Cycles. Glossary of terms GME/25 Superseded by BS EN 15532:2008 BS 6437:1984 Specification for polyethylene pipes (type 50) in metric diameters for general purposes PRI/88 This standard has been withdrawn as it is no longer relevant and has been replaced by BS EN :2002, BS EN :2002 and BS EN :2002 BS 6572:1985 Specification for blue polyethylene pipes up to nominal size 63 for below ground use for potable water PRI/88 This standard has been withdrawn as it is no longer relevant and has been replaced by BS EN :2003, BS EN :2003 and BS EN :2003 BS 6730:1986 Specification for black polyethylene pipes up to nominal size 63 for above ground use for cold potable water PRI/88 This standard has been withdrawn as it is no longer relevant and has been replaced by BS EN :2003, BS EN :2003 and BS EN :2003 BS 7735:1994 (IEC 60354:1991) Guide to loading of oil-immersed power transformers PEL/14 Superseded by BS IEC :2005 BS 7957:2000 Vitreous enamel systems. Determination of selfcleaning properties STI/36 This standard has been withdrawn as it is no longer in use BS 8200:1985 Code of practice for design of non-loadbearing external vertical enclosures of buildings B/209 This standard has been withdrawn as it is no longer relevant BS 8216:1991 Code of practice for use of sprayed lightweight mineral coatings used for thermal insulation and sound absorption in buildings B/209 This standard has been withdrawn as it is no longer relevant DD 232:2005 Method for determination of the maximum binder content of bituminous mixtures without excessive binder drainage B/510/1 Superseded by BS :2010 BS EN :2003 Continuously organic coated (coil coated) steel flat products. General information (definitions, materials, tolerances, test methods) ISE/109 Superseded by BS EN 10169:2010 BS EN :2006 Continuously organic coated (coil coated) steel flat products. Products for building exterior applications ISE/109 Superseded by BS EN 10169:2010 BS EN :2003 Continuously organic coated (coil coated) steel flat products. Products for building interior applications ISE/109 Superseded by BS EN 10169:2010 BS EN ISO :2003+A1:2009 Safety of machinery. Basic concepts, general principles for design. Basic terminology, methodology MCE/3 Superseded by BS EN ISO 12100:2010 BS EN ISO :2003+A1:2009 Safety of machinery. Basic concepts, general principles for design. Technical principles MCE/3 Superseded by BS EN ISO 12100:2010 BS EN :1998 Aluminium and aluminium alloys. Anodizing. Estimation of loss of absorptive power of anodic oxidation coatings after sealing by dye spot test with prior acid treatment STI/32 Superseded by BS EN ISO 2143:2010 BS EN :2001 Aluminium and aluminium alloys. Anodizing. Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20, 45, 60, and 85 STI/32 Superseded by BS EN ISO 7668:2010 BS EN ISO :2007 Safety of machinery. Risk assessment. Principles MCE/3 Superseded by BS EN ISO 12100:2010 BS EN 14864:2005 Vitreous and porcelain enamels. Enamel coatings applied to steel for writing surfaces. Specification STI/36 Superseded by BS EN ISO 28762:2010 BS EN 50371:2002 Generic standard to demonstrate the compliance of low power electronic and electrical apparatus with the basic restrictions related to human exposure to electromagnetic fields (10 MHz 300 GHz). General public GEL/106 Superseded by BS EN 62479: Prices may be subject to change. Update Standards Feb 2011

23 BS EN 60312:1998 Vacuum cleaners for household use. Methods of measuring the performance CPL/59 Superseded by BS EN 60312:2008 BS EN :2003 Household and similar electrical appliances. Safety. Particular requirements for commercial electric bains-marie CPL/61/5 Superseded by BS EN :2003+A1:2008 BS EN 60446:2007 Basic and safety principles for man-machine interface, marking and identification. Identification of conductors by colours or alphanumerics GEL/16 Superseded by BS EN 60445:2010 BS EN :2002 Medical electrical equipment. Particular requirements for safety. Particular requirements for the safety of magnetic resonance equipment for medical diagnosis CH/62/2 Superseded by BS EN :2002+A2:2008 BS EN 60901:1996 Specification for single-capped fluorescent lamps. Performance specifications CPL/34/1 Superseded by BS EN 60901:1996+A4:2008 BS EN 61217:1997 Guide to co-ordinates, movements and scales used for radiotherapy equipment CH/62/3 Superseded by BS EN 61217:1996+A2:2008 BS EN 61228:1995 Method of measuring and specifying the UV radiation of ultraviolet lamps used for suntanning CPL/34/1 Superseded by BS EN 61228:2008 BS EN 62374:2007 Semiconductor devices. Time dependent dielectric breakdown (TDDB) test for gate dielectric films EPL/47 Superseded by BS EN :2010 BS IEC :1999 Evaluation and routine testing in medical imaging departments. Constancy tests. Equipment for intra-oral dental radiography excluding dental panoramic equipment CH/62/2 This standard has been withdrawn as the corresponding IEC standard has been withdrawn BS IEC :1999 Evaluation and routine testing in medical imaging departments. Constancy tests. Equipment for indirect radioscopy and indirect radiography CH/62/2 This standard has been withdrawn as the corresponding IEC standard has been withdrawn BS IEC :2000 Evaluation and routine testing in medical imaging departments. Constancy tests. X-ray equipment for mammography CH/62/2 This standard has been withdrawn as the corresponding IEC standard has been withdrawn BS IEC :1999 Evaluation and routine testing in medical imaging departments. Constancy tests. Equipment for general direct radiography CH/62/2 This standard has been withdrawn as the corresponding IEC standard has been withdrawn DD IEC/PAS :2007 Batch control. Batch production records GEL/65/1 Superseded by BS EN :2010 PD :1980 General metrology. Vocabulary of legal metrology (VLM) SS/7 This standard has been withdrawn as it reproduces verbatim the International Vocabulary of Terms used in Legal Metrology (VIML) published by the International Organization of Legal Metrology, (OMIL). The OIML has published later editions of the VIML but PD :1980 has not been revised inline with the OIML documents. The latest edition of the VIML was published in 2000 and is available to download free of charge from the OIML web site., Consequently, the responsible BSI Technical Committee has decided to withdraw PD :1980 without replacement. An online copy of the 2000 edition of the VIML can be found on the OIML web site at URL: PD 6687:2006 Background paper to the UK National Annexes to BS EN B/525/2 Superseded by PD :2010 BS 4L 59:1985 Specification for sheet and strip of aluminiummanganese alloy (temper designation H16 or H26) ACE/61/-/24 Superseded by BS EN 4004:2007 BS L 110:1971 Specification for aluminium-coated sheet and strip of aluminium-copper-magnesiummanganese alloy (supplied for solution treatment by the user) (Cu 4.4, Mg 1.5, Mn 0.6) ACE/61/-/24 Superseded by BS EN 2703:2005 CP 312-3:1973 Code of practice for plastics pipework (thermoplastics material). Polyethylene pipes for the conveyance of liquids under pressure PRI/88 This standard has been withdrawn as it is no longer relevant and is replaced by BS :1983 NEW WORK STARTED The reference number of the committee responsible for each item of new work started is given after each entry. Where a work item has the temporary designation BS EN XXXX, it has not yet been allocated a standard number by the European standards body. BS 5975:2008/A1 Code of practice for temporary works procedures and the permissible stress design of falsework B/514/26 BS 6748:1986/A1 Specification for limits of metal release from ceramic ware, glassware, glass ceramic ware and vitreous enamel ware CW/47/2 BS Design management systems. Guide to managing design in construction will supersede BS :1996 B/555 BS :2004/A1 Screeds, bases and in situ floorings. Cementitious terrazo wearing surfaces. Code of practice B/507/6 BS :2004/A1 Screeds, bases and in situ floorings. Mastic asphalt underlays and wearing surfaces. Code of practice B/507/6 BS Library objects for architecture, engineering and construction. Identification and grouping B/555 BS Library objects for architecture, engineering and construction. Shape and measurement B/555 BS Library objects for architecture, engineering and construction. Attributes for specification and simulation B/555 BS XXXX Electricity meter boxes/outdoor meter cupboards PEL/13 PAS 107 Specification for the manufacture and storage of size reduced tyre materials PAS 223 Prerequisite programmes (PRPs) for food and drink packaging. Specification PAS Composite flywheels Update Standards Feb 2011 Prices may be subject to change. 23

24 New Work Started continued... EN Fire detection and fire alarm system. Resettable line type heat detectors FSH/12 EN Fire detection and fire alarm system. Point fire detectors using carbon monoxide sensors FSH/12 EN Fire detection and fire alarm systems. Nonresettable (digital) line-type heat detectors FSH/12 EN WI Railway applications. Track. Forged rail transitions RAE/2 EN WI Railway applications. Track. Mechanical requirements for joints in running rails RAE/2 EN 1679 Reciprocating internal combustion engines. Safety. Compression ignition engines will supersede BS EN :1998 MCE/14 EN Glass in buildings. Heat strengthened soda lime silicate glass. Definition and description will supersede BS EN :2000 B/520/1 EN ISO 2400 Non-destructive testing. Ultrasonic examination. Specification for calibration block No.1 will supersede BS EN 12223:2000 WEE/46 EN ISO Infusion equipment for medical use. Burette infusion sets for single use, gravity feed will supersede BS ISO :2004 CH/205 EN ISO 9012 Gas welding equipment. Air-aspirated hand blowpipes. Specifications and tests will supersede BS EN 731:1996 WEE/18 EN ISO 9229 Thermal insulation. Vocabulary will supersede BS EN ISO 9229:2007 B/540 EN 12004:2007/A1 Adhesives for tiles. Requirements, evaluation of conformity, classification and designation B/539 EN Fixed firefighting systems. Components for gas extinguishing systems. Requirements and test methods for nozzles for CO2 systems will supersede BS EN :2001 FSH/18/6 EN Smoke and heat control systems. Power supplies will supersede BS EN :2005 FSH/25 EN Aircraft ground support equipment. Specific requirements. Catering vehicles will supersede BS EN :2002+A1:2009 ACE/57 EN Aircraft ground support equipment. Specific requirements. Passenger boarding bridges will supersede BS EN :2003+A1:2009 ACE/57 EN Aircraft ground support equipment. Specific requirements. Disabled/incapacitated passenger boarding vehicles will supersede BS EN :2006+A1:2009 ACE/57 EN Bituminous mixtures. Test methods for hot mix asphalt. Stiffness will supersede BS EN :2004 B/510/1 EN Heating systems in buildings. Design for waterbased heating systems will supersede BS EN 12828:2003 RHE/24 EN Glass in building. Thermally toughened borosilicate safety glass. Definition and description will supersede BS EN :2002 B/520/1 EN Plastics welding personnel. Qualification testing of welders. Thermoplastics welded assemblies will supersede BS EN 13067:2003 PRI/21 EN Non destructive testing of welded joints of thermoplastics semifinished products. High voltage testing PRI/21 EN Spectator facilities. Layout criteria for spectator viewing area. Specification will supersede BS EN :2003 B/552 EN Railway applications. Track. Switches and crossings. Definitions will supersede BS EN :2003 RAE/2 EN Railway applications. Track. Switches and crossings. Requirements for geometric design will supersede BS EN :2003 RAE/2 EN Railway applications. Track. Switches and crossings. Requirements for wheel/rail interaction will supersede BS EN :2003 RAE/2 EN Railway applications. Track. Switches and crossings. Actuation, locking and detection will supersede BS EN :2005 RAE/2 EN Railway applications. Track. Switches and crossings. Switches will supersede BS EN :2005 RAE/2 EN Railway applications. Track. Switches and crossings. Fixed common and obtuse crossings will supersede BS EN :2005 RAE/2 EN Railway applications. Track. Switches and crossings. Crossings with moveable parts will supersede BS EN :2006 RAE/2 EN Railway applications. Track. Switches and crossings. Expansion devices will supersede BS EN :2007 RAE/2 EN Railway applications. Track. Switches and crossings. Layouts will supersede BS EN :2006 RAE/2 EN Geotextiles and geotextile-related products. Characteristics required for use in the construction of roads and other trafficked areas (excluding railways and asphalt inclusion) will supersede BS EN 13249:2001 B/553 EN Geotextiles and geotextile-related products. Characteristics required for use in the construction of railways will supersede BS EN 13250:2001 B/553 EN Geotextiles and geotextile-related products. Characteristics required for use in earthworks, foundations and retaining structures will supersede BS EN 13251:2001 B/553 EN Geotextiles and geotextile-related products. Characteristics required for use in drainage systems will supersede BS EN 13252:2001 B/ Prices may be subject to change. Update Standards Feb 2011

25 EN Geotextiles and geotextile-related products. Characteristics required for use in erosion control works (coastal protection, bank revetments) will supersede BS EN 13253:2001 B/553 EN Geotextiles and geotextile-related products. Characteristics required for use in the construction of reservoirs and dams will supersede BS EN 13254:2001 B/553 EN Geotextiles and geotextile-related products. Characteristics required for use in the construction of canals will supersede BS EN 13255:2001 B/553 EN Geotextiles and geotextile-related products. Characteristics required for use in the construction of tunnels and underground structures will supersede BS EN 13256:2001 B/553 EN Geotextiles and geotextile-related products. Characteristics required for use in solid waste disposals will supersede BS EN 13257:2001 B/553 EN Geotextiles and geotextile-related products. Characteristics required for use in liquid waste containment projects will supersede BS EN 13265:2001 B/553 EN Copper and copper alloys. Rod and wire for welding and braze welding will supersede BS EN 13347:2002 NFE/34 EN ISO :2005/A1 Dentistry. Periodontal curettes, dental scalers and excavators. Periodontal curettes of Gr-type CH/106/4 EN Copper and copper alloys. Seamless copper tubes for electrical purposes will supersede BS EN 13600:2002 NFE/34 EN Copper and copper alloys. Copper rod, bar and wire for general electrical purposes will supersede BS EN 13601:2002 NFE/34 EN Copper and copper alloys. Drawn, round copper wire for the manufacture of electrical conductors will supersede BS EN 13602:2002 NFE/34 EN Copper and copper alloys. Test methods for assessing protective tin coatings on drawn round copper wire for electrical purposes will supersede BS EN 13603:2002 NFE/34 EN Copper and copper alloys. Products of high conductivity copper for electronic tubes, semiconductor devices and vacuum applications will supersede BS EN 13604:2002 NFE/34 EN Copper and copper alloys. Copper profiles and profiled wire for electrical purposes will supersede BS EN 13605:2002 NFE/34 EN Safety of machinery. Guidance for the application of ergonomics standards in the design of machinery will supersede BS EN 13861:2002 PH/9 EN Tanks for transport of dangerous goods. Digital interface for the product recognition device will supersede BS EN 14116:2007+A1:2008 AUE/18 EN Protection profile for secure signature creation device. Overview IST/17 EN Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of mycobactericidal activity of chemical disinfectants and antiseptics used in the veterinary field. Test method and requirements (phase 2, step 1) will supersede BS EN 14204:2004 CH/216 EN Unbound and hydraulically bound mixtures. Specifications. Cement bound granular mixtures will supersede BS EN :2004 B/510/4 EN Hydraulically bound mixtures. Specifications. Slag bound mixtures will supersede BS EN :2004 B/510/4 EN Hydraulically bound mixtures. Specifications. Fly ash bound mixtures will supersede BS EN :2004 B/510/4 EN Hydraulically bound mixtures. Specifications. Fly ash for hydraulically bound mixtures will supersede BS EN :2004 B/510/4 EN Hydraulically bound mixtures. Specifications. Hydraulic road binder bound mixtures will supersede BS EN :2004 B/510/4 EN Chemical disinfectants and antiseptics. Quantitative surface test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in veterinary area on nonporous surfaces without mechanical action. Test method and requirements (phase 2, step 2) will supersede BS EN 14349:2007 CH/216 EN 14844:2006+A1:2008/A2 Precast concrete products. Box culverts B/524 EN Plastics piping systems. Soil and waste discharge systems within the building structure. Performance characteristics for pipes, fittings and their joints will supersede BS EN 15012:2007 PRI/88 EN Plastics piping systems. Non-pressure drainage and sewerage piping components buried in ground. Requirements and test/assessment methods for pipes and fittings PRI/88 EN Plastics piping systems. Buried and above ground systems for water and other fluids under pressure. Performance characteristics for pipes, fittings and their joints will supersede BS EN 15014:2007 PRI/88 EN Plastics piping systems. Systems for hot and cold water not intended for human consumption. Performance characteristics for pipes, fittings and their joints will supersede BS EN 15015:2007 PRI/88 EN 15050:2007/A1 Precast concrete products. Bridge elements will supersede BS EN 15050:2007 B/524 EN Facility management. Performance benchmarking FMW/1 EN Ventilation for buildings. Ductwork. Cleanliness of ventilation system RHE/2 EN Transportable gas cylinders. Cylinder bundles. Periodic inspection and testing PVE/3/7 Update Standards Feb 2011 Prices may be subject to change. 25

26 New Work Started continued... EN ISO Agricultural machinery. Sprayers. Inspection of sprayers in use. Field crop sprayers AGE/15 EN ISO Agricultural machinery. Sprayers. Inspection of sprayers in use. Air-assisted sprayers for bush and tree crops AGE/15 EN Conservation of cultural property. Procedures and instruments for measuring humidity in the air and moisture exchanges between air and cultural property B/560 EN Fibre-reinforced plastic composites. Declaration of raw material characteristics. General requirements PRI/21 EN Fibre-reinforced plastic composites. Declaration of raw material characteristics. Additional requirements for resins, curing systems, additives and modifiers PRI/21 EN Fibre-reinforced plastics composites. Declaration of raw material characteristics. Additional requirements for fibre PRI/21 EN Fibre-reinforced plastic composites. Declaration of raw material characteristics. Additional requirements for fabrics PRI/21 EN Fibre-reinforced plastic composites. Declaration of raw material characteristics. Additional requirements for core materials PRI/21 EN Agricultural machinery. Backhoes. Safety AGE/6 EN Security requirements for device for authentication. Protection profile for core functionality IST/17 EN Security requirements for device for authentication. Protection profile for extension for trusted channel to certificate generation application IST/17 EN Security requirements for device for authentication. Additional functionality for security targets IST/17 EN Levels of performance and acceptance for street cleaning and municipal waste disposal services. General requirements B/508/1 EN Railway application. Environmental conditions. Design and test of rolling stock under severe conditions RAE/1 EN Machines for compacting waste materials or recyclable fractions. Horizontal baling presses. Safety requirements MCE/3/16 EN Air quality. Atmospheric measurements near ground with Differential Optical Absorption Spectroscopy (DOAS). Ambient air and diffuse emission measurements EH/2/1 EN Adhesives. Emulsion polymerized isocyanate (EPI) for load-bearing timber structures. Classification and performance requirements PRI/52 EN Pyrotechnic articles. Theatrical pyrotechnic articles. Terminology CII/47 EN Pyrotechnic articles. Theatrical pyrotechnic articles. Categories of theatrical pyrotechnic articles CII/47 EN Pyrotechnic articles. Theatrical pyrotechnic articles. Requirements for construction and performance CII/47 EN Pyrotechnic articles. Theatrical pyrotechnic articles. Minimum labelling requirements and instructions for use CII/47 EN Pyrotechnic articles. Theatrical pyrotechnic articles. Test methods CII/47 EN Fibre organisers and closures to be used in optical fibre communication systems. Product specifications. Multimode mechanical fibre splice GEL/86/2 EN Audio, video and similar electronic apparatus. Safety requirements will supersede BS EN 60065:2002+A2:2010 EPL/108 EN Surge arresters. Metal-oxide surge arresters without gaps for HVDC converter stations PEL/37 EN Measuring relays and protection equipment. Electromagnetic compatibility requirements will supersede BS EN :2009 PEL/95 EN Appliance couplers for household and similar general purposes. General requirements will supersede BS EN :2001+A1:2007 PEL/23/3 EN Optical fibres. Measurement methods and test procedures. Gamma irradiation will supersede BS EN :2003 GEL/86/1 EN Optical fibre cables. Generic specification. Basic optical cable test procedures will supersede BS EN :2003 GEL/86/1 EN Optical fibre cables. Generic specification. Basic optical cable test procedures will supersede BS EN :2003 GEL/86/1 EN Optical fibre cables. Generic specification. Basic optical cable test procedures will supersede BS EN :2003 GEL/86/1 EN Optical fibre cables. Generic specification. Basic optical cable test procedures will supersede BS EN :2003 GEL/86/1 EN Optical fibre cables. Generic specification. Basic optical cable test procedures will supersede BS EN :2003 GEL/86/1 EN Surface acoustic wave (SAW) filters of assessed quality. Generic specification will supersede BS EN :2003 EPL/49 EN 60901:1996+A4:2008/A6 Single-capped fluorescent lamps. Performance specifications CPL/34/1 EN Information technology equipment. Safety. General requirements will supersede BS EN :2006+A1:2010 EPL/ Prices may be subject to change. Update Standards Feb 2011

27 EN 61231:2010/A1 International lamp coding system (ILCOS) CPL/34/1 EN Fibre optic communication subsystem test procedures. Digital systems. Optical eye pattern, waveform and extinction ratio measurement will supersede BS EN :2008 GEL/86/3 EN Fibre optic communication subsystem basic test procedures. Fibre optic cable plant. Single-mode fibre optic cable plant attenuation will supersede BS EN :2000 GEL/86/3 EN Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Assembly and disassembly of fibre optic closures will supersede BS EN :2007 GEL/86/2 EN Communication networks and systems in substations. General requirements will supersede BS EN :2002 PEL/57 EN High-voltage switchgear and controlgear. Direct connection between power transformers and gas-insulated metal-enclosed switchgear for rated voltages above 52 kv PEL/17/1 EN Audio/video, information and communication technology equipment. Safety requirements EPL/108 EN Engineering data exchange format for use in industrial automation systems engineering. Architecture and general requirements AMT/7 EN Flexible display devices. Terminology and letter symbols EPL/47 CEN/TR Plastics piping systems. Guidance for the installation inside buildings of pressure systems for hot and cold water intended for human consumption will supersede DD ENV 12108:2001 PRI/88/2 CEN/TR Ambient air. Guide for the measurement of EC and OC deposited on filters EH/2/1 CEN/TR Ventilation for hospitals RHE/2 CEN/TS WI Personal fall protection equipment. Anchor devices. Recommendations for anchor devices for use by more than one person simultaneously PH/5 CEN/TS Winter maintenance equipment. Spreading machines (gritting machines). Requirements for distribution and their test B/513 CEN/TS Petroleum, petrochemical and natural gas industries. Method of test for fire dampers PSE/17 IEC/TR Explanatory information related to IEC , Audio/Video, Information and communication technology equipment. Safety. Requirements EPL/108 IEC/TS Guide for additional functions associated with RCDs PEL/23/1 ISO Technical product documentation. Indication of dimensions and tolerances. Dimensioning of mechanical engineering drawings TDW/4 ISO Technical product documentation (TPD). Indication of dimensions and tolerances. Dimensioning of steel structures TDW/4 ISO Acoustics. Rating of sound insulation in buildings and of building elements. Airborne sound insulation will supersede BS EN ISO 717-1:1997 EH/1 ISO Acoustics. Rating of sound insulation in buildings and of building elements. Impact sound insulation will supersede BS EN ISO 717-2:1997 EH/1 ISO 1138:2007/A1 Rubber compounding ingredients. Carbon black. Determination of sulfur content PRI/23 ISO 4656:2007/A1 Rubber compounding ingredients. Carbon black. Determination of oil absorption number (OAN) and oil absorption number of compressed sample (COAN) PRI/23 ISO 6929 Steel products. Definitions and classification ISE/1 ISO 8330 Rubber and plastics hoses and hose assemblies. Vocabulary will supersede BS EN ISO 8330:2008 PRI/66 ISO/IEC :2001+A7:2010/A11 Identification cards. Test methods. Proximity cards IST/17 ISO Specification for hexagon flange head tapping screws will supersede BS 7600:1992 FME/9/3 ISO Hydraulic fluid power. Electrically modulated hydraulic control valves. Test methods for threeway directional flow control valves will supersede BS ISO :1998 MCE/18/-/8 ISO Acoustics. Noise emitted by machinery and equipment. Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions will supersede BS EN ISO 11200:2009 EH/1 ISO 12243:2003/A1 Medical gloves made from natural rubber latex. Determination of water-extractable protein using the modified lowry method PRI/50/-/1 ISO Ships and marine technology. Risk assessment on anti-fouling systems on ships. Marine environmental risk assessment method for antifouling systems on ships using biocidally active substances SME/32/-/2 ISO Heating systems in buildings. Method for calculation of the system performance and system design. Combustion systems (boilers) RHE/2 ISO/IEC :2010/A1 Identification cards. Contactless integrated circuit cards. Proximity cards. Radio frequency power and signal interface IST/17 ISO/IEC :2001+A3:2006/A4 Identification cards. Contactless integrated circuit(s) cards. Proximity cards. Initialization and anticollision IST/17 ISO/IEC :2008/A2 Identification cards. Contactless integrated circuit cards. Proximity. Transmission protocol IST/17 Update Standards Feb 2011 Prices may be subject to change. 27

28 New Work Started continued... ISO Electronic document management. Design and operation of an information system for the preservation of electronic documents. Specification IDT/1/3 ISO Hydrogen fuel. Product specification. Proton exchange membrane (PEM) fuel cell applications for stationary appliances PVE/3/8 ISO Protective clothing against heat and flame. Determination of heat transmission on exposure to flame using a cylindrical tester/specimen holder PH/3/12 ISO Thermal performance in the built environment. Determination of air permanence of building materials B/540/8 ISO Photography. Digital cameras. Measuring shooting time lag, shutter release time lag, shooting rate, and start-up time CPW/42 ISO Plastics. Thermoplastic polyurethanes for moulding and extrusion. Designation system and basis for specifications PRI/82 ISO Plastics. Thermoplastic polyurethanes for moulding and extrusion. Preparation of test specimens and determination of properties PRI/82 ISO Plastics. Thermoplastic polyurethanes for moulding and extrusion. Distinction between ether and ester polyurethanes by determination of the ester group content PRI/82 ISO Plastics. Polyamide (PA) moulding and extrusion materials. Designation system, marking of products and basis for specification PRI/82 ISO Dentistry. A minimal dental implant data set for clinical use CH/106/8 ISO Resilient floor covering. Determination of the effect of simulated movement of a furniture leg PRI/3 ISO Measuring the colour of durum wheat semolina and common wheat flour AW/4 ISO Road vehicles. Environmental conditions and testing for electrical and electronic equipment. Mechanical loads will supersede BS ISO :2007 AUE/16 ISO Packaging for terminally sterilized medical devices. Guidance on the application of ISO and ISO CH/198 ISO Requirements for bodies providing audit and certification of candidate trustworthy digital repositories ACE/68 ISO/TR Workplace air. Guidelines for selecting analytical methods for sampling and analyzing isocyanates in air will supersede PD ISO/TR 17737:2007 EH/2/2 ISO Packaging. General requirements for the use of ISO standards in the field of packaging and the environment PKW/0 ISO Packaging. Packaging and the environment; optimization of the packaging systems PKW/0 ISO Packaging. Reuse PKW/0 ISO Packaging. Packaging recoverable by energy recovery PKW/0 ISO Packaging. Packaging by organic recovery PKW/0 ISO/IEC Information technology for learning, education and training. e-portfolio reference model IST/43 ISO Road vehicles. Degrees of protection (IP-Code). Protection of electrical equipment against foreign objects, water and access will supersede BS ISO 20653:2006 AUE/16 ISO/IEC Information technology. Office equipment. Copying machines and multi-function devices. Information to be included in specification sheets and related test methods IST/3 ISO/IEC TR Information technology. Security techniques. Information security management. Organizational economics IST/33 ISO 27427:2010/A1 Anaesthetic and respiratory equipment. Nebulizing systems and components CH/121/5 ISO/IEC Information technology. Office equipment. Determination of chemical emission rates from electronic equipment IST/3 ISO/IEC TR Information technology. Security techniques. Physical security attacks, mitigation techniques and security requirements IST/33 ISO Physiological quantities and their units. Physics SS/7 ISO Non-invasive sphygmomanometers. Clinical validation of automated measurement type will supersede BS ISO :2009 CH/121/5 DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT NATIONAL BRITISH STANDARDS You may now comment on any National British Standard online. BSI British Standards has launched a Draft Review system which allows access to the drafts of all National British Standards. To enhance access of Drafts for Public Comment for the wider community, make comments more visible and move into collaborative working practices, you will now be able to comment on any National British Standard by visiting All you need to do is register. This service is free of charge. Please note that the only standards available on this service are pure British Standards (National Standards e.g: BS XXXX). European and international documents are not included at this time. Deadlines for receipt of comments on each of the individual drafts can be found at The deadline for the following drafts is 31 March, 2011 unless otherwise stated. Should you wish to receive these drafts in hard copy format, they are available for a fee from BSI Customer Services (see How to order on page 2). 11/ DC BS 6440 Powered lifting platforms with nonenclosed liftways for use by persons with limited mobility. Specification MHE/4 28 Prices may be subject to change. Update Standards Feb 2011

29 11/ DC BS Library objects for architecture, engineering and construction. Recommended 2D symbols of building elements for use in building information modelling B/ April, / DC BS 6164 Code of practice for health and safety in tunnelling in the construction industry members, non-members B/513 11/ DC BS Risk management. Code of practice RM/1 11/ DC BS 7909 Code of practice for temporary electrical systems for entertainment related purposes members, non-members CPW/4 11/ DC BS 7801 Escalators and moving walks. Code of practice for safe working on escalators and moving walks MHE/4 DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT ADOPTIONS All Draft British Standards are available from BSI Customer Services (see How to order on page 2) Most drafts are charged at to members and to non-members. Larger draft documents are charged at a higher price according to the number of pages and are priced individually below. Comments are welcome and should be sent to Debbie Stead, Head of Committee Service Centre Operations, BSI Head Office, 389 Chiswick High Road, London W4 4AL by 31 March, 2011 unless otherwise stated, to be considered by the relevant BSI committee. Draft standards may be modified before adoption and issue as British Standards. 10/ DC BS EN Sludge, treated biowaste and soil. Determination of adsorbable organically bound halogens (AOX) H/-/4 10/ DC BS EN Sludge, treated biowaste and soil. Determination of polychlorinated biphenyls (PCB) by gas chromatography with mass selective detection (GC-MS) and gas chromatography with electron-capture detection (GC-ECD) H/-/4 10/ DC BS EN Sludge, treated biowaste and soil. Determination of total nitrogen using dry combustion method H/-/4 10/ DC BS EN Sludge, treated biowaste and soil. Determination of Kjeldahl nitrogen H/-/4 10/ DC BS EN Sludge, treated biowaste and soil. Digestion of nitric acid soluble fractions of elements H/-/4 10/ DC BS EN Sludge, treated biowaste and soil. Determination of trace elements by inductively coupled plasma optical emission spectrometry (ICP-OES) H/-/4 10/ DC BS EN Sludge, treated biowaste and soil. Determination of trace elements using inductively coupled plasma mass spectrometry (ICP-MS) H/-/4 10/ DC BS EN Sludge, treated biowaste and soil. Digestion of aqua regia soluble fractions of elements H/-/4 10/ DC BS EN ISO Cleanrooms and associated controlled environments. Classification of air cleanliness by particle concentration LBI/30 11 April, / DC BS EN ISO Cleanrooms and associated controlled environments. Specifications for monitoring and periodic testing to prove continued compliance with ISO LBI/30 11 April, / DC BS EN ISO Health informatics. Audit trails for electronic health records IST/35 10/ DC BS ISO Water quality. Enumeration of Escherichia coli and coliform bacteria. Most probable number method EH/3/4 17 March, / DC BS EN ISO Foodstuffs. Molecular biomarker analysis. Protein-based methods AW/-/3 10/ DC BS EN Machines for underground mines. Mobile machines working underground. Safety. Rubber tyred vehicles MRE/1 10/ DC BS EN Petroleum and natural gas industries. Pipeline transportation systems PSE/17/2 18 March, / DC BS ISO 6356 Textile floor coverings. Assessment of static electrical propensity. Walking test PRI/3 10/ DC BS ISO Cardiac rhythm management devices. Symbols to be used with cardiac rhythm management device labels, and information to be supplied. General requirements CH/150/6 10/ DC BS ISO Paints and varnishes. Determination of curing characteristics using a free-damped oscillation method. Start temperature of reaction STI/10 28 February, / DC BS ISO Paints and varnishes. Determination of curing characteristics using a free-damped oscillation method. Glasstransition temperature STI/10 28 February, / DC BS ISO Surface chemical analysis. Scanning-probe microscopy. Measurement of drift rate CII/60 10/ DC BS EN ISO Soil quality. Parameters for geochemical modelling of leaching and specification of constituents in soils and soil materials. Extraction of amorphous iron oxides and hydroxides with ascorbic acid EH/4 10/ DC BS EN ISO Soil quality. Parameters for geochemical modelling of leaching and specification of constituents in soils and materials. Extraction of crystalline iron oxides and hydroxides with dithionite EH/4 10/ DC BS EN ISO Soil quality. Parameters for geochemical modelling of leaching and specification of constituents in soils and materials. Extraction of aluminium oxides and hydroxides with ammonium oxalate/oxalic acid EH/4 Update Standards Feb 2011 Prices may be subject to change. 29

30 Draft British Standards for Public Comment continued... 10/ DC BS EN ISO Soil quality. Parameters for geochemical modelling of leaching and specification of constituents in soils and materials. Extraction of humic substances from solid samples EH/4 10/ DC BS EN ISO Soil quality. Parameters for geochemical modelling of leaching and specification of constituents in soils and materials. Extraction of humic substances from aqueous samples EH/4 10/ DC BS EN Animal feed. Determination of dioxins and dioxin-like PCBs by GC/HRMS and of indicator PCBs by GC/HRMS AW/10 10/ DC BS EN ISO Paints and varnishes. Electrochemical measurement of the protection provided to steel by paint coatings. Current interrupter (CI) technique, relaxation voltammetry (RV) or DC transient (DCT) measurements STI/10 10/ DC BS EN ISO Air quality. Sampling conventions for airborne particle deposition in the human respiratory system EH/2/2 10/ DC BS ISO Information and documentation. Digital records conversion and migration process IDT/2/17 10/ DC BS EN ISO Water quality. Sampling. Preservation and handling of water samples EH/3/6 2 April, / DC BS ISO Imaging materials. Processed colour photographs. Methods for measuring thermal stability CPW/42 10/ DC BS ISO Crop protection equipment. Drift classification of spraying equipment. Potential spray drift measurement for field crop sprayers by the use of a test bench AGE/15 10/ DC BS ISO Water quality. Toxicity test based on reproduction inhibition of the green macroalga Ulva pertusa EH/3/5 17 April, / DC BS ISO Capability of detection. Methodology for the determination of the critical value and the minimum detectable values in Poisson distribution measurements SS/6 10/ DC BS EN Curtain walling. Watertightness. Laboratory test under dynamic condition of air pressure and water spray B/538/6 10/ DC BS ISO/IEC Software and systems engineering. Requirements for managers of user documentation IST/15 16 April, / DC BS EN Energy Management System Application Program Interface (EMS-API). Solved power system state profiles PEL/57 10/ DC BS ISO Rough-terrain trucks. Safety requirements and verification. Variable-reach trucks MHE/7 10/ DC BS ISO Rough-terrain trucks. User requirements MHE/7 10/ DC BS EN Sustainably produced biomass for energy applications. Principles, criteria, indicators and verifiers for biofuels and bioliquids. Conformity assessment including chain of custody and mass balance PTI/20 10/ DC BS ISO Diesel engines. Cleanliness assessment of fuel injection equipment MCE/22 10/ DC BS EN 232 Baths. Connecting dimensions B/503 10/ DC BS EN 251 Shower trays. Connecting dimensions B/503 10/ DC BS EN ISO Needle-based injection systems for medical use. Requirements and test methods. Finished containers CH/84 10/ DC BS EN ISO Gas cylinders. Cylinder valves. Manufacturing tests and examinations PVE/3/1 21 March, / DC BS ISO Road vehicles. Fuse-links. Fuselinks with shortened tabs (Type D) AUE/16 10/ DC BS EN Transportation loads. Measurement and evaluation of climatic and other loads. Data acquisition and general requirements for measuring equipment PKW/0/-/6 12 April, / DC BS ISO Ships and marine technology. Ship s mooring and towing fittings. Mooring chocks SME/32/-/4 8 April, / DC BS ISO Ships and marine technology. Ship s mooring and towing fittings. Panama chocks SME/32/-/4 8 April, / DC BS ISO Ships and marine technology. Ship s mooring and towing fittings. Universal fairleads with upper roller SME/32/-/4 8 April, / DC BS ISO Ships and marine technology. Ship s mooring and towing fittings. Universal fairleads without upper roller SME/32/-/4 8 April, / DC BS ISO Ships and marine technology. Ship s mooring and towing fittings. Steel rollers SME/32/-/4 8 April, / DC BS ISO Ships and marine technology. Ship s mooring and towing fittings. Shipside roller fairleads SME/32/-/4 8 April, / DC BS ISO Ships and marine technology. Ship s mooring and towing fittings. Pedestal fairleads SME/32/-/4 8 April, / DC BS ISO Ships and marine technology. Ship s mooring and towing fittings. Welded steel bollards for sea-going vessels SME/32/-/4 30 Prices may be subject to change. Update Standards Feb 2011

31 10/ DC BS ISO Ships and marine technology. Ship s mooring and towing fittings. Cruciform bollards SME/32/-/4 8 April, / DC BS ISO Ships and marine technology. Ship s mooring and towing fittings. Recessed bitts (Steel plate type) SME/32/-/4 8 April, / DC BS ISO Ships and marine technology. Ship s mooring and towing fittings. Recessed bitts (Casting type) SME/32/-/4 8 April, / DC BS ISO Cranes. Control layout and characteristics. Basic arrangement and requirements for mobile cranes MHE/3/5 28 March, / DC BS ISO Tractors and machinery for agriculture and forestry. Test procedures for positioning and guidance systems in agriculture. Testing of satellite-based auto-guidance systems during straight and level travel AGE/6 10/ DC BS ISO Safety and control devices for gas burners and gas-burning appliances. Particular requirements. Automatic and semiautomatic valves GSE/22 10/ DC BS ISO Electrically propelled road vehicles. Test specification for lithium-ion traction battery systems. High energy applications PEL/69 10/ DC BS EN Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles. General requirements PEL/23/4 10/ DC BS EN Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles. Dimensional compatibility and interchangeability requirements for A.C. pin and contact-tube accessories PEL/23/4 10/ DC BS EN Medical electrical equipment. Dosimeters with ionization chambers and/or semi-conductor detectors as used in X-ray diagnostic imaging CH/62/3 10/ DC BS ISO 3316 Assembly tools for screws and nuts. Attachments for hand-operated square drive socket wrenches. Dimensions and tests MTE/15 10/ DC BS ISO Condition monitoring and diagnostics of machines. Vocabulary GME/21/7 21 March, / DC BS ISO Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry. Sampling EH/2/2 8 March, / DC BS ISO Statistical methods in process management. Capability and performance. Capability of measurement processes SS/4 15 April, / DC BS ISO 666 A1 Machine tools. Mounting of grinding wheels by means of hub flanges MTE/13 10/ DC BS EN Household and similar electrical appliances. Test code for the determination of airborne acoustical noise. Particular requirements for washing machines and spin extractors CPL/59/1 10/ DC BS EN Slate and stone for discontinuous roofing and external cladding. Methods of test for slate and carbonate slate B/542/7 4 April, / DC BS ISO Plain bearings. Testing of the tribological behaviour of bearing materials. Testing of bearing metals MCE/12 10/ DC BS ISO Plain bearings. Testing of the tribological behaviour of bearing materials. Testing of polymer-based bearing materials MCE/12 10/ DC BS ISO Plain bearings. Pad materials for tilting pad bearings MCE/12 10/ DC BS EN 1728 Furniture. Seating. Test methods for the determination of strength and durability FW/0/1 8 April, / DC BS ISO Cutter arbors with parallel key and tenon drive. Dimensions and designation of tool holders with polygonal interface with flange contact surface MTE/18 10/ DC BS ISO Cutter arbors with parallel key and tenon drive. Dimensions and desigantion of tool holders with modular taper interface with ball track system MTE/18 10/ DC CD-ROM BS ISO/HL Health informatics. Clinical genomics pedigree topic IST/35 28 February, / DC BS ISO/IEC Systems and software engineering. Systems and software assurance. System integrity levels IST/15 7 April, / DC BS EN Management and control of cleaning operations in drains and sewers. Rehabilitation B/505 10/ DC BS EN Safety of woodworking machines. Circular sawing machines. Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading MTE/23 10/ DC BS EN Safety of woodworking machines. Circular sawing machines. Multiblade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading MTE/23 10/ DC BS EN Safety of woodworking machines. Circular sawing machines. Double mitre sawing machines for V cutting MTE/23 10/ DC BS EN Safety of woodworking machines. Circular sawing machines. Manual horizontal cutting cross-cut sawing machines with one saw unit (manual radial arm saws) MTE/23 10/ DC BS IEC High-voltage plugs, socketoutlets and ship couplers for high-voltage shore connection systems (HVSC-systems). Dimensional compatibility and interchangeability requirements for accessories to be used by various types of ship PEL/23/4 Update Standards Feb 2011 Prices may be subject to change. 31

32 Draft British Standards for Public Comment continued... 10/ DC BS ISO Ceramic tiles. Definitions, classification, characteristics and marking B/ March, / DC BS EN Sludge, treated biowaste and soil. Determination of trace elements in aqua regia and nitric acid digests. Graphite furnace atomic absorption spectrometry method (GFAAS) H/-/4 10/ DC BS EN Sludge, treated biowaste and soil. Guidance for sample pretreatment H/-/4 10/ DC BS EN Sludge, treated biowaste and soil. Determination of mercury in aqua regia and nitric acid digests. Cold vapour atomic absorption spectrometry (CVAAS) H/-/4 10/ DC BS EN Sludge, treated biowaste and soil. Determination of mercury in aqua regia and nitric acid digests. Cold vapour atomic fluorescence spectrometry (CVAFS) H/-/4 10/ DC BS EN 544 Bitumen shingles with mineral and/or synthetic reinforcements. Product specification and test methods B/542/6 11 April, / DC BS ISO Cranes. Tolerances for wheels and travel and traversing tracks. General MHE/3/3 18 April, / DC BS EN Railway applications. Tank wagons. Identification plates for tank wagons for the carriage of dangerous goods RAE/1/-/9 10/ DC BS EN Railway applications. Tank wagons. Bottom emptying devices for liquid products including vapour return RAE/1/-/9 10/ DC BS EN Railway applications. Tank wagons. Bottom filling and emptying devices for gases liquefied under pressure RAE/1/-/9 10/ DC BS EN Railway applications. Tank wagons. Devices for top filling and emptying of liquid products RAE/1/-/9 10/ DC BS EN Railway applications. Tank wagons. Devices for vapour return while filling or emptying of liquid products RAE/1/-/9 10/ DC BS EN Railway applications. Tank wagons. Manholes RAE/1/-/9 10/ DC BS EN Railway applications. Tank wagons. Platforms and ladders RAE/1/-/9 10/ DC BS EN Railway applications. Tank wagons. Heating connections RAE/1/-/9 10/ DC BS EN Galvanic anodes for cathodic protection in seawater and saline mud GEL/603 10/ DC BS EN ISO Cathodic protection of harbour installations GEL/603 10/ DC BS ISO Space systems. Contamination and cleanliness control ACE/68/-/1 9 April, / DC BS EN ISO Leather. Tests for colour fastness. Colour fastness to cycles of to-and-fro rubbing TCI/69 10/ DC BS EN ISO Leather. Tests for colour fastness. Colour fastness to perspiration TCI/69 10/ DC BS EN ISO Leather. Tests for colour fastness. Colour fastness to water TCI/69 10/ DC BS EN Qualification test of welders. Fusion welding. Steels WEE/36 2 April, / DC BS EN Water based surface embedded heating and cooling systems. Definitions and symbols RHE/6 10/ DC BS EN 890 Chemicals used for treatment of water intended for human consumption. Iron (III) sulfate, liquid CII/59 28 February, / DC BS EN 1730 Furniture. Tables. Test methods for the determination of stability, strength and durability FW/0/1 8 April, / DC BS EN Winter and road service area maintenance equipments. Front-mounted equipments. Fixed front mounting plates B/513 4 April, / DC BS EN Fibre optic interconnecting devices and passive components. Fibre optic connector optical interfaces. Optical interfaces for 50 um multimode fibre. General and guidance GEL/86/2 11 February, / DC BS EN Plastics and rubber machines. Winding machines for film or sheet. Safety requirements MCE/3/2 10/ DC BS EN Ventilation for buildings. Test procedures and measurement methods to hand over air conditioning and ventilation systems RHE/2 10/ DC BS EN Leisure accommodation vehicles. Caravans. Habitation requirements relating to health and safety B/511 10/ DC BS EN Leisure accommodation vehicles. Motor caravans. Habitation requirements relating to health and safety B/511 10/ DC BS EN 482 Workplace exposure. General requirements for the performance of procedures for the measurement of chemical agents EH/2/2 26 March, / DC BS EN Leather. Upholstery leather characteristics. Guide for selection of leather for furniture TCI/69 10/ DC BS EN Leather. Guideline on the designation and description of leather in upholstery and automotive interior applications TCI/69 32 Prices may be subject to change. Update Standards Feb 2011

33 10/ DC BS EN Sustainably produced biomass for energy applications. Principles, criteria, indicators and verifiers for biofuels and bioliquids. Terminology PTI/20 10/ DC BS EN Sustainably produced biomass for energy applications. Principles, criteria, indicators and verifiers for biofuels and bioliquids. Biodiversity and environmental aspects PTI/20 10/ DC BS EN Industrial, commercial and garage doors and gates. Thermal transmittance. Requirements for classification B/538/5 10/ DC BS EN Mountaineering equipment. Frictional anchors. Safety requirements and test methods SW/136/5 6 April, / DC BS EN Health care provision by chiropractors SVS/13 10/ DC BS EN Radiators and convectors. Technical specifications and requirements RHE/6 10/ DC BS EN Radiators and convectors. Test methods and rating RHE/6 10/ DC BS EN Radiators and convectors. Evaluation of conformity RHE/6 10/ DC BS ISO/IEC Information technology. Learning, education, and training. Metadata for learning resources. Educational elements IST/43 10/ DC BS ISO/IEC Metadata for learning resources. Availability, distribution, and intellectual property elements IST/43 10/ DC BS ISO/IEC Information technology. Security techniques. Key management. Group key management IST/33 10/ DC BS ISO Plain bearings. Hardness testing of bearing metals. Multilayer bearings materials MCE/12 10/ DC BS EN A1 Low-voltage switchgear and controlgear. Contactors and motor-starters. Electromechanical contactors and motor-starters PEL/17/2 10/ DC BS EN Rotating electrical machines. On-line partial discharge measurements on the stator winding insulation of rotating electrical machines PEL/2 10/ DC BS EN ISO/IEC Electricity Metering Data Exchange. The DLMS/COSEM suite. COSEM Object Identification System (OBIS) PEL/13 28 February, / DC BS EN ISO/IEC Electricity Metering Data Exchange. The DLMS/COSEM Suite. COSEM Interface classes members, non-members PEL/13 28 February, / DC BS EN F2 Vehicles, boats and internal combustion engines. Radio disturbance characteristics. Limits and methods of measurement for the protection of on-board receivers Annex on ALSE Performance Verification 150 khz. 1 GHz GEL/210/11 10/ DC BS EN A1 Household and similar electrical appliances. Safety. Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances CPL/61/7 10/ DC BS EN Chimney. Clay ceramic flue liners. Flue liners operating under wet conditions. Requirements and test methods B/506/3 10/ DC BS ISO A1 Motorcycles. Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles. Definitions, symbols and general considerations AUE/14 10/ DC BS ISO A1 Motorcycles. Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles. Motorcyclist anthropometric impact dummy AUE/14 10/ DC BS ISO A1 Motorcycles. Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles. Injury indices and risk/benefit analysis AUE/14 10/ DC BS ISO A1 Motorcycles. Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles. Full-scale impact-test procedures AUE/14 10/ DC BS ISO A1 Motorcycles. Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles. Documentation and reports AUE/14 10/ DC BS EN ISO/IEC A1 Medical electrical equipment. Particular requirements for basic safety and essential performance of haemodialysis, haemodiafiltration and haemofiltration equipment CH/150/2 10/ DC BS ISO A1 Motorcycles. Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles. Standardized procedures for performing computer simulations of motorcycle impact tests AUE/14 10/ DC BS ISO 9841 Oil of hyssop (Hyssopus officinalis L. ssp. officinalis) AW/54 10/ DC BS ISO Space systems. Subsystems/units to spacecraft interface control document ACE/68/-/2 19 April, / DC BS EN A1 International lamp coding system (ILCOS) CPL/34/1 18 February, / DC BS EN A6 Single-capped fluorescent lamps. Performance specifications CPL/34/1 18 February, / DC BS EN Optical fibres. Measurement methods and test procedures. Gamma irradiation GEL/86/1 18 February, / DC BS EN Fibre-optic communication subsystem test procedures. Installed cable plant. Singlemode attenuation and optical return loss measurement GEL/86/3 Update Standards Feb 2011 Prices may be subject to change. 33

34 Draft British Standards for Public Comment continued... 10/ DC BS EN Measuring relays and protection equipment. Electromagnetic compatibility requirements PEL/95 18 February, / DC BS ISO Space systems. Small auxiliary spacecraft to launch vehicle interface control document ACE/68/-/2 10/ DC BS ISO 2575 A3 Road vehicles. Symbols for controls, indicators and tell-tales AUE/12 10/ DC BS EN Surface acoustic wave (SAW) filters of assessed quality. Generic specification EPL/49 4 March, / DC BS EN Electroacoustics. Hearing instruments and hearing systems. General requirements for basic safety and essential performance EPL/29 11 February, / DC BS EN Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Assembly and disassembly of fibre optic mechanical splices, fibre management systems and closures GEL/86/2 4 March, / DC BS EN Fibre optic communication subsystem test procedures. Digital systems. Optical eye pattern, waveform and extinction ratio measurement GEL/86/3 10/ DC BS EN Fibre organisers and closures to be used in optical fibre communication systems. Product specifications. Multimode mechanical fibre splice GEL/86/2 10/ DC BS EN Ventilation for buildings. Measurement of air flows on site methods RHE/2 10/ DC BS ISO/IEC A1 Information technology. Generic cabling. Introduction to the MICE environmental classification TCT/7 22 February, / DC BS EN 3014 Aerospace series. Shank nuts, selflocking, serrated, in heat resisting steel FE- PA2601 (A286). Classification MPa (at ambient temperature)/650 C ACE/12 10/ DC BS EN 3015 Aerospace series. Shank nuts, selflocking, serrated, in heat resisting steel FE- PA2601 (A286), silver plated. Classification MPa (at ambient temperature)/650 C ACE/12 10/ DC BS EN 4121 Aerospace series. Shank nuts, serrated, self-locking, in heat resisting steel FE- A2601 (A286), silver plated on thread. Classification MPa (at ambient temperature)/650 C ACE/12 11/ DC BS EN ISO Microbiology of food and animal feeding stuffs. Preparation of test samples, initial suspension and decimal dilutions for microbiological examination. Specific rules for the preparation of samples taken at the primary production stage AW/9 2 April, / DC BS EN ISO Microbiology of food and animal feeding stuffs. Primary production stage. Sampling techniques AW/9 2 April, / DC BS EN Integrated circuits. Measurement of electromagnetic immunity. Local Injection Horn Antenna (LIHA) method EPL/47 28 February, / DC BS ISO Environmental management for concrete and concrete structures. General principles B/ April, / DC BS ISO Implants for surgery. In vitro evaluation for apatite-forming ability of implant materials CH/150/1 11/ DC BS ISO 9465 Alpine ski-bindings. Lateral release under impact loading. Test method SW/ April, / DC BS EN ISO 3183 Petroleum and natural gas industries. Steel pipe for pipeline transportation systems members, non-members PSE/17/2 2 April, / DC BS ISO A1 Assembly, adjustment and inspection of an alpine ski/binding/boot (S-B-B) system SW/136 6 April, / DC BS EN Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1. Lamp caps. Amendment 47. Part 2. Lampholders. Amendment 44. Part 3. Gauges. Amendment 45 CPL/34/2 30 April, 2011 DOCUMENT\S NOT ISSUED AS DPCs Comments can be sent by or by post to named contacts at: BSI Head Office 389 Chiswick High Road London W4 4AL Tel: EN :2005/A1 Railway applications. Brake discs for railway rolling stock. Brake discs pressed or shrunk onto the axle or drive shaft, dimensions and quality requirements EN :2008/A1 Railway applications. Brake indicators. Pneumatically operated brake indicators EN :2009/A1 Railway applications. Braking. Wheel slide protection The above draft amendments have been circulated by CEN/TC 256 under the shortened UAP procedure. Text of the draft amendments may be obtained from the Programme Manager (below) on request. Contact: Tim Newins tim.newins@bsigroup.com RAE/4 ISO :1991 Vitreous and porcelain enamels. Determination of the resistance to abrasion. Abrasion testing apparatus 34 Prices may be subject to change. Update Standards Feb 2011

35 ISO :1991 Vitreous and porcelain enamels. Determination of the resistance to abrasion. Loss in mass after sub-surface abrasion BSI will be implementing the above international standards as BS ISO :1991 and BS ISO :1991 respectively at the request of the UK Committee STI/36 because the international standards are used in the UK. Contact: Committee Service Centre STI/36 pren ISO Plastics. Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA). Requirements and test methods This draft standard has been circulated for parallel ISO Final Draft International Standard ballot and CEN Unique Acceptance Procedure ballot, which are due to close on 2 February, 2011 in ISO and 2 March, 2011 in CEN respectively. Copies of the draft text are available from the contact point (below) under document reference PRI/75_10_0025. Contact: Committee Service Centre csc@bsigroup.com PRI/75 pren Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55 C and 260 C. DR family, screened (spiral) and jacketed, UV laser printable. Product standard pren Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, quadrax, size 8, male, type E, crimp, class R. Product standard pren Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, quadrax, size 8, female, type E, crimp, class R. Product standard pren Aerospace series. Cables, electrical, aircraft use. Test methods. Porosity of copper cladding on aluminium strands pren Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Technical specification These standards have been circulated at enquiry stage without DPC s. The text is available on request from the contact point (below). Contact: Committee Service Centre csc@bsigroup.com ACE/6 pren 4160 Aerospace series. Paints and varnishes. Determination of the effect of thermal exposure pren 4476 Aerospace series. Paints and varnishes. Cold curing intermediate coat These standards are at Formal Vote stage. The text is available on request from the contact point (below). Contact: Committee Service Centre csc@bsigroup.com ACE/65 prcen/tr Electronic fee collection. Personalisation and mounting of first mount OBE Copies of the above document are available upon request from the Programme Manager (below). Contact: Alex Price alex.price@bsigroup.com EPL/278 CEN EUROPEAN STANDARDS EUROPEAN RATIFIED TEXTS The documents listed below have recently been issued by CEN but have not yet been published as BS ENs. BSI has an obligation to adopt all ENs and to withdraw any conflicting British Standards (BSs) or parts of BSs. The following will be implemented as BS ENs or as amendments to BS ENs shortly. Notification of their implementation will be given in the BS EN Publications section of the relevant edition of Update Standards. EN 81-41:2010 Safety rules for the construction and installation of lifts. Special lifts for the transport of persons and goods. Vertical lifting platforms intended for use by persons with impaired mobility MHE/4 EN 331: Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings :December 2010 to EN 331:1998 GSE/1 EN 378-1:2008+A1:2010 Refrigerating systems and heat pumps. Safety and environmental requirements. Basic requirements, definitions, classification and selection criteria RHE/18 EN 617:2001+A1:2010 Continuous handling equipment and systems. Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers MHE/9 EN 618:2002+A1:2010 Continuous handling equipment and systems. Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors MHE/9 EN 620:2002+A1:2010 Continuous handling equipment and systems. Safety and EMC requirements for fixed belt conveyors for bulk materials MHE/9 EN 741:2000+A1:2010 Continuous handling equipment and systems. Safety requirements for systems and their components for pneumatic handling of bulk materials MHE/9 EN 957-6:2010 Stationary training equipment. Treadmills, additional specific safety requirements and test methods SW/136/4 EN :2004+A1:2010 Safety of machinery. Safety requirements for the design and construction of printing and paper converting machines. Common requirements MCE/3/9 EN 1110:2010 Flexible sheets for waterproofing. Bitumen sheets for roof waterproofing. Determination of flow resistance at elevated temperature B/546/1 EN 2481:2010 Aerospace series. Steel FE-PL2108 (35NiCrMo16) MPa R m 1400 MPa. Forgings. D e 75 mm ACE/61/-/15 EN 2482:2010 Aerospace series. Steel FE-PL2108 (35NiCrMo16) MPa R m 1300 MPa. Bars. D e 100 mm ACE/61/-/15 EN 2483:2010 Aerospace series. Steel FE-PL2108 (35NiCrMo16) MPa R m 1300 MPa. Forgings. D e 100 mm ACE/61/-/15 EN 3197:2010 Aerospace series. Design and installation of aircraft electrical and optical interconnection systems ACE/6 EN 3687:2010 Aerospace series. Bolts, normal hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated. Classification: 1100MPa/650 C ACE/12 EN 4658:2010 Aerospace series. Steel FE-PM1507 (X1CrNiMoAlTi ). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D 200 mm. R m 1520 MPa ACE/61/-/15 Update Standards Feb 2011 Prices may be subject to change. 35

36 CEN European Standards continued... EN 4659:2010 Aerospace series. Steel FE-PM1507 (X1CrNiMoAlTi ). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D 200 mm. R m 1650 MPa ACE/61/-/15 EN 12601:2010 Reciprocating internal combustion engine driven generating sets. Safety MCE/14 EN 12816:2010 LPG equipment and accessories. Transportable refillable LPG cylinders. Disposal PVE/19 EN 12853: Food processing machinery. Hand-held blenders and whisks. Safety and hygiene requirements to EN 12853:2001+A1:2010 MCE/3/5 EN 13109:2010 LPG equipment and accessories. LPG tanks and drums. Disposal PVE/19 EN :2010 Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE). Specifications for ancillary fittings including shallow inspection chambers PRI/88/1 EN 13634:2010 Protective footwear for motorcycle riders. Requirements and test methods PH/1 EN 14359:2006+A1:2010 Gas-loaded accumulators for fluid power applications MCE/18/-/1 EN 15275: Structural adhesives. Characterisation of anaerobic adhesives for co-axial metallic assembly in building and civil engineering structures CORRIGENDUM 2:December 2010 to EN 15275:2007 PRI/52 CEN/CLC GUIDE 18:2010 Execution of Specific Agreements issued to CEN and CENELEC in accordance with the EC and EFTA Framework Partnership Agreements 2009 (FPA 2009)covering the tasks to be assigned to CEN and CENELEC relating to European standardization CEN/CLC GUIDE 19:2010 Guidelines for the administration of Specific Agreements by National Members including principles for subcontracting CEN WORKSHOP AGREEMENTS CWA :2010 European e-competence framework 2.0. A common European framework for ICT professionals in all industry sectors members, non-members CWA :2010 European e-competence framework 2.0. User guidelines for the application of the European e-competence framework members, non-members CWA :2010 European e-competence framework 2.0. Building the e-cf. A combination of sound methodology and expert contribution members, non-members CWA 16255:2010 Meat raw materials obtained by deboning. Assessment of the muscle fibre structure. Pork, poultry and rabbit members, non-members CEN REPORTS CEN/TR 852:2010 Plastics piping systems for the transport of water intended for human consumption. Migration assessment. Guidance on the interpretation of laboratory derived migration values PRI/88/4 CEN/TR 16110:2010 Characterization of waste. Guidance on the use of ecotoxicity tests applied to waste B/508/3 CEN TECHNICAL SPECIFICATIONS CEN/TS :2010 Identification card systems. European citizen card. European citizen card interoperability using an application interface IST/17 CEN/TS :2010 Postal services. ID-tagging of letter mail items. ID-tag structure, message and binary SVS/4 CEN/TS :2010 Postal services. ID-tagging of letter mail items. BNB-78 encoding specification SVS/4 CEN/TS :2010 Postal services. ID-tagging of letter mail items. BNB-62 encoding specification SVS/4 CEN/TS :2010 Postal services. ID-tagging of letter mail items. State encoding specification for flats SVS/4 CEN/TS :2010 Postal services. ID-tagging of letter mail items. 4-state encoding specification for small letters SVS/4 CENELEC PUBLICATIONS EUROPEAN RATIFIED TEXTS The documents listed below have recently been issued by CENELEC but have not yet been published as BS ENs. BSI has an obligation to adopt all ENs and to withdraw any conflicting British Standards (BSs) or parts of BSs. The following will be implemented as BS ENs or as amendments to BS ENs shortly. Notification of their implementation will be given in the BS EN Publications section of the relevant edition of Update Standards. EN 50160: Voltage characteristics of electricity supplied by public electricity networks to EN 50160:2010 GEL/8 EN : Information technology. Generic cabling systems. Office premises :December 2010 to EN :2007 TCT/7 EN : Information technology. Generic cabling systems. Industrial premises :December 2010 to EN :2007 TCT/7 EN : Information technology. Generic cabling systems. Homes :December 2010 to EN :2007 TCT/7 EN : Information technology. Generic cabling systems. Data centres :December 2010 to EN :2007 TCT/7 36 Prices may be subject to change. Update Standards Feb 2011

37 New standard Fire safety engineering PD :2010 Application of fire safety engineering principles to the design of buildings. Structural response and fire spread beyond the enclosure of origin (Sub-system 3) What is PD ? This PD is one of a series of documents that support BS 7974, Code of practice on the application of fire safety engineering principles to the design of buildings. PD examines the spread of fire beyond the enclosure of origin when any material outside of the fire enclosure ignites or suffers thermal degradation. This document assists users in compiling quantitative and detailed analysis of specific aspects of design and also contains guidance and information on the right methods to compare and contrast between different approaches or sources of data to ensure fire safety. Fire safety engineering has many benefits. The use of BS 7974 facilitates the practice of fire safety engineering and, in particular: Provides the designer with an organized approach to fire safety design Allows the safety levels for alternative fire safety designs to be compared Provides a basis for selection of appropriate fire protection systems Provides opportunities for innovative design Provides information on the management of fire safety for a building. Read more at To buy online visit or contact BSI Customer Services quoting marketing reference code 7974B-U Tel +44 (0) Fax +44 (0) orders@bsigroup.com raising standards worldwide Standards and publications may also be ordered via the BSI shop at *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0) BSI British Standards Institution 2011

38 CENELEC Publications continued... EN 55022: (IEC CISPR 22:2005/A2:2006) Information technology equipment. Radio disturbance characteristics. Limits and methods of measurement AMENDMENT 2:December 2010 to EN 55022:2005 GEL/210/11 EN 55022:2010 (IEC CISPR 22:2008) Information technology equipment. Radio disturbance characteristics. Limits and methods of measurement GEL/210/11 EN :2010 (IEC :2010) High voltage test techniques. General definitions and test requirements PEL/42 EN :2010 (IEC :2010) Explosive atmospheres. Equipment protection by pressurized room p GEL/31/X EN :2010 (IEC :2010) Quartz crystal units of assessed quality. Standard outlines and lead connections EPL/49 EN :2010 (IEC :2010) Series capacitors for power systems. Thyristor controlled series capacitors PEL/33 EN :2010 (IEC :2010) Electric traction. Rotating electrical machines for rail and road vehicles. Electronic converterfed alternating current motors GEL/9/2 EN :2010 (IEC :2010) Piezoelectric filters of assessed quality. Standard outlines and lead connections EPL/49 EN :2010 (IEC :2010) Industrial-process control valves. Control valve data sheet GEL/65/2 EN :2010 (IEC :2010) Fire hazard testing. Glowing/hot-wire based test methods. Glow-wire flammability index (GWFI) test method for materials GEL/89 EN :2010 (IEC :2010) Fire hazard testing. Glowing/hot-wire based test methods. Glow-wire ignition temperature (GWIT) test method for materials GEL/89 EN : (IEC :2006/A1:2010) Hand-held motor-operated electric tools. Safety. Particular requirements for chain saws :December 2010 to EN :2006 CPL/61/23 EN : (IEC :2002/A1:2008) Hand-held motor-operated electric tools. Safety. Particular requirements for drain cleaners :December 2010 to EN :2002 CPL/116 EN :2010 (IEC :2010) Semiconductor devices. Mechanical and climatic test methods. Resistance to soldering temperature for through-hole mounted devices EPL/47 EN :2010 (IEC :2010) Semiconductor devices. Mechanical and climatic test methods. Power cycling EPL/47 EN :2010 (IEC :2010) Transmitters for use in industrial-process control systems. Methods for inspection and routine testing GEL/65/2 EN :2010 (IEC :2010) Radio-frequency connectors. R.F. coaxial connectors with inner diameter of outer conductor 12 mm with screw coupling. Characteristic impedance 75 ohms (Type 3,5/12) EPL/46 EN : Lamp controlgear. Particular requirements for starting devices (other than glow starters) to EN :2001 CPL/34/3 EN : Lamp controlgear. Particular requirements for D.C. or A.C. supplied electronic step-down convertors for filament lamps to EN :2001 CPL/34/3 EN : Lamp controlgear. Particular requirements for A.C. supplied electronic ballasts for fluorescent lamps to EN :2001 CPL/34/3 EN : Lamp controlgear. Particular requirements for D.C. supplied electronic ballasts for general lighting to EN :2001 CPL/34/3 EN : Lamp controlgear. Particular requirements for D.C. supplied electronic ballasts for public transport lighting to EN :2001 CPL/34/3 EN : Lamp controlgear. Particular requirements for D.C. supplied electronic ballasts for aircraft lighting to EN :2001 CPL/34/3 EN : Lamp controlgear. Particular requirements for D.C. supplied electronic ballasts for emergency lighting to EN :2006 CPL/34/3 EN : Lamp controlgear. Particular requirements for ballasts for fluorescent lamps to EN :2001 CPL/34/3 EN : Lamp controlgear. Particular requirements for ballasts for discharge lamps (excluding fluorescent lamps) to EN :2001 CPL/34/3 EN : Lamp controlgear. Particular requirements for electronic invertors and convertors for highfrequency operation of cold tubular discharge lamps (neon tubes) to EN :2001 CPL/34/3 EN : Lamp controlgear. Particular requirements for miscellaneous electronic circuits used with luminaires to EN :2001 CPL/34/3 EN : Lamp controlgear. Particular requirements for D.C. or A.C. supplied electronic ballasts for discharge lamps (excluding fluorescent lamps) to EN :2005 CPL/34/3 38 Prices may be subject to change. Update Standards Feb 2011

39 EN : Lamp controlgear. Particular requirements for D.C. or A.C. supplied electronic controlgear for LED modules to EN :2006 CPL/34/3 EN : Conduit systems for cable management. Particular requirements. Rigid conduit systems 1:December 2010 to EN :2004 PEL/213 EN : Conduit systems for cable management. Particular requirements. Pliable conduit systems 1:December 2010 to EN :2004 PEL/213 EN : Conduit systems for cable management. Particular requirements. Flexible conduit systems 1:December 2010 to EN :2004 PEL/213 EN 61803: (IEC 61803:1999/A1:2010) Determination of power losses in high-voltage direct current (HVDC) converter stations with line-commutated converters :December 2010 to EN 61803:1999 PEL/22 EN 62041:2010 (IEC 62041:2010) Safety of transformers, reactors, power supply units and combinations thereof. EMC requirements PEL/96 HARMONIZATION DOCUMENTS CENELEC HD : Electrical installations in buildings. Selection and erection of electrical equipment to CENELEC HD :2010 JPEL/64 CENELEC HD : Low-voltage electrical installations. Requirements for special installations or locations. Electrical installations in caravans and motor caravans to CENELEC HD :2009 JPEL/64 IEC PUBLICATIONS It is BSI policy to supply the UK version of all adopted standards, which are published as British standards, unless otherwise requested. The following IEC publications are available from BSI Customer Services (see How to order on page 2) IEC :2010 (Edition 3) High-voltage test techniques. Measuring systems members, non-members PEL/42 IEC : Environmental testing. Tests. Test Sa. Simulated solar radiation at ground level and guidance for solar radiation testing to IEC :2010 GEL/104 IEC : Explosive atmospheres. Equipment. General requirements to IEC :2007 GEL/31/X IEC :2010 (Edition 3) Explosive atmospheres. Equipment repair, overhaul and reclamation members, non-members GEL/31/11 IEC 60212:2010 (Edition 3) Standard conditions for use prior to and during the testing of solid electrical insulating materials members, non-members GEL/112 IEC :2010 AC motor capacitors. Motor start capacitors members, non-members PEL/33 IEC : Low-voltage fuses. Supplementary requirements for fuse-links for the protection of solar photovoltaic energy systems to IEC :2010 PEL/32 IEC :2010 (Edition 3) Power cables with extruded insulation and their accessories for rated voltages from 1 kv (U m = 1,2 kv) up to 30 kv (U m = 36 kv). Test requirements on accessories for cables with rated voltages from 6 kv (U m = 7,2 kv) up to 30 kv (U m = 36 kv) members, non-members GEL/20/11 IEC :2010 (Edition 4) Safety in electroheating installations. General requirements members, non-members PEL/27 IEC :2010 (Edition 3) Industrial-process control valves. Noise considerations. Control valve aerodynamic noise prediction method members, non-members GEL/65/2 IEC :2010 (Edition 3) Medical electrical equipment. Particular requirements for the basic safety and essential performance of cardiac defibrillators members, non-members CH/62/4 IEC :2010 Medical electrical equipment. Particular requirements for the basic safety and essential performance of operating tables members, non-members CH/62/4 IEC : Insulation coordination for equipment within low-voltage systems. Use of coating, potting or moulding for protection against pollution CORRIGENDUM 1:November 2010 to IEC :2003 GEL/109 IEC :2010 Flexible insulating sleeving. Specifications for individual types of sleeving. Sheet 283. Heat shrinkable, polyolefin sleeving for bus-bar insulation members, non-members GEL/15/5 IEC :2010 (Edition 4) Cable networks for television signals, sound signals and interactive services. Active wideband equipment for cable networks members, non-members EPL/100 IEC :2010 (Edition 3) Semiconductor devices. Discrete devices. Bipolar transistors members, non-members EPL/47 Update Standards Feb 2011 Prices may be subject to change. 39

40 IEC Publications continued... IEC :2010 (Edition 3) Semiconductor devices. Discrete devices. Fieldeffect transistors members, non-members EPL/47 IEC :2010 Semiconductor devices. Discrete devices. Isolated power semiconductor devices members, non-members EPL/47 IEC : Low-voltage switchgear and controlgear. General rules :December 2010 to IEC : members, non-members PEL/17/2 IEC :2010 Arc welding equipment. Limited duty equipment members, non-members WEE/6 IEC : Electromagnetic compatibility (EMC). Generic standards. Emission standard for residential, commercial and light-industrial environments :December 2010 to IEC : members, non-members GEL/210/12 IEC : Electromagnetic compatibility (EMC). Generic standards. Emission standard for industrial environments :December 2010 to IEC : members, non-members GEL/210/12 IEC :2010 Switches for appliances. Particular requirements for cord switches members, non-members EPL/23 IEC :2010 Switches for appliances. Particular requirements for change-over selectors members, non-members EPL/23 IEC :2010 Radio-frequency connectors. Sectional specification for 2.4 series RF connectors members, non-members EPL/46 IEC :2010 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Tensile strength of coupling mechanism members, non-members GEL/86/2 IEC :2010 (Edition 3) Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Cold members, non-members GEL/86/2 IEC :2010 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Ferrule compression force members, non-members GEL/86/2 IEC :2010 Wind turbines. Communications for monitoring and control of wind power plants. Logical node classes and data classes for condition monitoring members, non-members PEL/88 IEC :2010 Low-voltage switchgear and controlgear assemblies. Assemblies for power distribution in public networks members, non-members PEL/17/3 IEC :2010 Fibre optic interconnecting devices and passive components. Performance standard. Nonconnectorized single-mode bidirectional 1490/1550 nm downstream and 1310 nm upstream WWDM devices for category O. Uncontrolled environment members, non-members GEL/86/2 IEC :2010 Fibre optic interconnecting devices and passive components. Performance standard. Nonconnectorized single-mode bidirectional 1310 nm upstream and 1490 nm downstream WWDM devices for category C. Controlled environment members, non-members GEL/86/2 IEC :2010 Function blocks (FB) for process control. Electronic Device Description Language (EDDL) members, non-members AMT/7 IEC :2010 Communication networks and systems for power utility automation. Basic communication structure. Common data classes members, non-members PEL/57 IEC/TR 62000:2010 Guideline for combining different single-mode fibres types members, non-members GEL/86/1 IEC :2010 Low-voltage switchgear and controlgear. Controller-device interfaces (CDIs). CompoNet members, non-members PEL/17/2 IEC :2010 Fibre optic active components and devices. Package and interface standards. SFF 10-pin transceivers members, non-members GEL/86/3 IEC :2010 Fibre optic active components and devices. Test and measurement procedures. ATM-PON transceivers members, non-members GEL/86/3 IEC :2010 Protection against lightning. General principles members, non-members GEL/81 IEC :2010 Protection against lightning. Risk management members, non-members GEL/81 IEC :2010 Protection against lightning. Physical damage to structures and life hazard members, non-members GEL/81 IEC :2010 Protection against lightning. Electrical and electronic systems within structures members, non-members GEL/81 IEC 62455:2010 Internet protocol (IP) and transport stream (TS) based service access members, non-members EPL/ Prices may be subject to change. Update Standards Feb 2011

41 New for healthcare resilience PAS 2015:2010 Framework for health services resilience Sir David Nicholson, the Chief Executive of the National Health Service in England, says "Our patients and the local communities that we serve expect the NHS to be there for them when they need it, no matter what the circumstances." The aim of PAS 2015 is to support this expectation by providing a resilience framework for NHS-funded organizations and all providers of NHS-funded healthcare. It is intended for practitioners of emergency planning, business continuity and resilience in organizations providing healthcare. All NHS-funded organizations are required to plan and implement emergency plans, including business continuity plans, as though they were Category 1 or 2 responders under the Civil Contingencies Act Anyone with responsibility for developing, delivering and managing resilience and continuity strategies as part of the governance of healthcare organizations will find this document of interest. Read more and buy at To buy please visit or contact BSI Customer Services quoting marketing reference 2015B-U Tel +44 (0) Fax +44 (0) orders@bsigroup.com Standards and publications may also be ordered via the BSI shop at *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0) BSI British Standards Institution 2011 New book Cloud Computing. A Practical Introduction to the Legal Issues Renzo Marchini Are you new to cloud computing and find the legal aspects daunting? If you need an introduction to bring you up to speed, then this is the book for you, whether you are from a legal background or not. Read it to get a practical overview on both providing and buying cloud services, and how they differ from other ways of buying computing resources. How will this book help with cloud computing issues? It summarises the key cloud-specific legal issues as well as more general issues, so you can maximize business advantage, and anticipate and reduce exposure to risk Provides practical steps for addressing contractual issues between customer and suppliers, as well as considering the regulatory context Includes guidance on standards such as ISO 27001, to give you a standardsbased context for this topic Economic and environmental benefits are explained so your business can make savings and improve efficiency Each chapter contains Practical Tips to implement and Key Points to aid learning. The book also covers security in the cloud, data protection, data transfers, software licensing, service levels, liability and contractual issues. A section covers issues that regulated sectors, such as financial services may face when the cloud service is used. To buy please visit or contact BSI Customer Services quoting marketing reference 0117B-U Tel +44 (0) Fax +44 (0) orders@bsigroup.com Standards and publications may also be ordered via the BSI shop at *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0) BSI British Standards Institution 2011

42 IEC Publications continued... IEC :2010 Digital living network alliance (DLNA) home networked device interoperability guidelines. Link protection members, non-members EPL/100 IEC : Railway applications. Environmental conditions for equipment. Equipment on board rolling stock CORRIGENDUM 1:November 2010 to IEC :2010 GEL/9 IEC : Railway applications. Environmental conditions for equipment. Fixed electrical installations CORRIGENDUM 1:November 2010 to IEC :2010 GEL/9 IEC : Railway applications. Environmental conditions for equipment. Equipment for signalling and telecommunications CORRIGENDUM 1:November 2010 to IEC :2010 GEL/9 IEC 62509:2010 Battery charge controllers for photovoltaic systems. Performance and functioning members, non-members GEL/82 IEC :2010 Lightning protection system components (LPSC). Requirements for conductor fasteners members, non-members GEL/81 IEC :2010 Secondary lithium-ion cells for the propulsion of electric road vehicles. Performance testing members, non-members PEL/21 IEC :2010 Secondary lithium-ion cells for the propulsion of electric road vehicles. Reliability and abuse testing members, non-members PEL/21 IEC/TR 62685:2010 Industrial communication networks. Profiles. Assessment guideline for safety devices using IEC functional safety communication profiles (FSCPs) members, non-members AMT/7 IEC CISPR : Specification for radio disturbance and immunity measuring apparatus and methods. Radio disturbance and immunity measuring apparatus. Antennas and test sites for radiated disturbance measurements to IEC CISPR :2010 GEL/210/12 ISO PUBLICATIONS It is BSI policy to supply the UK version of all adopted standards, which are published as British standards, unless otherwise requested. The following ISO publications are available from BSI Customer Services (see How to order on page 2) ISO 3343:2010 (Edition 3) Reinforcement yarns. Determination of twist balance index members, non-members PRI/42 ISO 3613:2010 (Edition 3) Metallic and other inorganic coatings. Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zincaluminium alloys. Test methods members, non-members STI/33 ISO 3780: Road vehicles. World manufacturer identifier (WMI) code to ISO 3780:2009 AUE/15 ISO :2010 Agricultural machinery. Safety. Pick-up balers members, non-members AGE/32 ISO :2010 Petroleum and related products. Determination of the corrosion resistance of fire-resistant hydraulic fluids. Non-aqueous fluids members, non-members MCE/18/-/16 IEC :2010 Alarm systems. Intrusion and hold-up systems. Intrusion detectors. Microwave detectors members, non-members GW/1 IEC :2010 Alarm systems. Intrusion and hold-up systems. Intrusion detectors. Combined passive infrared/microwave detectors members, non-members GW/1 IEC :2010 Alarm systems. Intrusion and hold-up systems. Intrusion detectors. Combined passive infrared/ultrasonic detectors members, non-members GW/1 IEC :2010 Alarm systems. Intrusion and hold-up systems. Intrusion detectors. Opening contacts (magnetic) members, non-members GW/1 ISO 178:2010 (Edition 5) Plastics. Determination of flexural properties members, non-members PRI/21 ISO : Fibre-reinforced plastics. Methods of producing test plates. Moulding of prepregs :December 2010 to ISO : members, 9.64 non-members PRI/42 ISO 2531: Ductile iron pipes, fittings, accessories and their joints for water applications to ISO 2531:2009 PSE/10 ISO 4602:2010 (Edition 3) Reinforcements. Woven fabrics. Determination of number of yarns per unit length of warp and weft members, non-members PRI/42 ISO 4603: Textile glass. Woven fabrics. Determination of thickness :December 2010 to ISO 4603: members, 9.64 non-members PRI/42 ISO :2010 Rolling bearings. Axial internal clearance for four-point-contact ball bearings. Rolling bearings. Internal clearance members, non-members MCE/7 42 Prices may be subject to change. Update Standards Feb 2011

43 NEW SAE Pricing Industries covered are: Aerospace Automobile What standards are covered? Commercial Vehicles Motorsports SAE Aerospace Material Specifications SAE Aerospace Standards (includes Aerospace Standards (AS) Aerospace Information Reports (AIR) Aerospace Recommended Practices (ARP) SAE J Reports (Ground Vehicle Standards (J Series). Popular SAE standards are: SAE AS 9100:2009 Rev C - Quality Management systems. Requirements for aviation, space and defense organizations SAE AS 9133: Qualification Procedure for Aerospace Standard Parts SAE AS 9120:2009 Rev A - Quality Management Systems - Requirements for Aviation, Space and Defense Distributors SAE AMS 5648: Steel, corrosion and heat-resistant, bars wire, forgings, tubing and rings 17CR 12NI 2.5MO Solution heat treated. Price: 50.00* (BSI members and non-members) Delivery time: 3-5 working days. Postage costs apply. * Exceptions apply To order please worldwide.standards@bsigroup.com. For quotes and queries please or call Worldwide Standards quoting marketing reference SAE1B-U Tel Fax worldwide.standards@bsigroup.com Postage applies BSI British Standards Institution 2011 BSI Knowledge Centre Your standards resource BSI Knowledge Centre provides the following services to BSI Members: Enquiry Line information on the status, availability, scope and coverage of standards detailed database searches across current and withdrawn standards response within 1 working day Loan service borrow a wide selection of international and foreign standards Information Resources consult databases, journals and standards in our member study area. Contact us to arrange a visit Withdrawn Standards a comprehensive collection of withdrawn British Standards available to view and purchase in PDF and hardcopy For more information contact the BSI Knowledge Centre: Tel +44 (0) Fax +44 (0) knowledgecentre@bsigroup.com raising standards worldwide

44 ISO Publications continued... ISO : Earth-moving machinery. Symbols for operator controls and other displays. Common symbols :December 2010 to ISO : members, 9.64 non-members B/513/1 ISO :2010 Fire detection and alarm systems. Audible alarm devices members, non-members FSH/12 ISO 7745:2010 Hydraulic fluid power. Fire-resistant (FR) fluids. Requirements and guidelines for use members, non-members MCE/18 ISO :2010 Road vehicles. Fuse-links. Fuse-links with female contacts (type A) and bolt-in contacts (type B) and their test fixtures members, non-members AUE/16 ISO 9698:2010 Water quality. Determination of tritium activity concentration. Liquid scintillation counting method members, non-members EH/3 ISO 9717:2010 Metallic and other inorganic coatings. Phosphate conversion coating of metals members, non-members STI/33 ISO/IEC :2010 (Edition 3) Information technology. Security techniques. Digital signature schemes giving message recovery. Integer factorization based mechanisms members, non-members IST/33 ISO 10676:2010 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for water purification performance of semiconducting photocatalytic materials by measurement of forming ability of active oxygen members, non-members RPI/13 ISO 10801:2010 Nanotechnologies. Generation of metal nanoparticles for inhalation toxicity testing using the evaporation/condensation method members, non-members NTI/1 ISO 10804:2010 Restrained joint systems for ductile iron pipelines. Design rules and type testing members, non-members PSE/10 ISO 10808:2010 Nanotechnologies. Characterization of nanoparticles in inhalation exposure chambers for inhalation toxicity testing members, non-members NTI/1 ISO :2010 Gas cylinders. Compatibility of cylinder and valve materials with gas contents. Autogeneous ignition test for non-metallic materials in oxygen atmosphere members, non-members PVE/3 ISO/IEC :2010 Information technology. User interface icons. Framework and general guidance members, non-members ICT/-/6 Will not be implemented as a British Standard ISO 11666:2010 Non-destructive testing of welds. Ultrasonic testing. Acceptance levels members, non-members WEE/46 ISO 11771:2010 Air quality. Determination of time-averaged mass emissions and emission factors. General approach members, non-members EH/2/4 ISO/IEC 11801: Information technology. Generic cabling for customer premises CORRIGENDUM 1:November 2010 to ISO/IEC 11801:2002/A2:2010 TCT/7 Will not be implemented as a British Standard ISO 12239:2010 Smoke alarms using scattered light, transmitted light or ionization members, non-members FSH/12/2 ISO :2010 Tissue paper and tissue products. Waterabsorption time and water-absorption capacity, basket-immersion test method members, non-members PAI/11 ISO :2010 Graphic technology. Safety requirements for graphic technology equipment and systems. Prepress and press equipment and systems members, non-members PAI/43 ISO :2010 Graphic technology. Safety requirements for graphic technology equipment and systems. Binding and finishing equipment and systems members, non-members PAI/43 ISO :2010 Graphic technology. Safety requirements for graphic technology equipment and systems. Stand-alone platen presses members, non-members PAI/43 ISO 12737:2010 (Edition 3) Metallic materials. Determination of planestrain fracture toughness members, non-members ISE/101/2 ISO 12759:2010 Fans. Efficiency classification for fans members, non-members MCE/17 Will not be implemented as a British Standard ISO 13500: Petroleum and natural gas industries. Drilling fluid materials. Specifications and tests :December 2010 to ISO 13500: members, 9.64 non-members PSE/17/-/3 ISO :2010 Industrial automation systems and integration. Parts library. Description methodology. Methodology for structuring parts families members, non-members AMT/4 Will not be implemented as a British Standard 44 Prices may be subject to change. Update Standards Feb 2011

45 ISO/IEC : Information technology. Generic coding of moving pictures and associated audio information. Advanced Audio Coding (AAC) CORRIGENDUM 2:December 2010 to ISO/IEC :2006 IST/37 Will not be implemented as a British Standard ISO/IEC :2010 Information technology. Security techniques. Non-repudiation. Mechanisms using symmetric techniques members, non-members IST/33 ISO 14005:2010 Environmental management systems. Guidelines for the phased implementation of an environmental management system, including the use of environmental performance evaluation members, non-members SES/1/1 Will not be implemented as a British Standard ISO :2010 Geometrical product specifications (GPS). Dimensional tolerancing. Linear sizes members, non-members TDW/4 ISO 14406:2010 Geometrical product specifications (GPS). Extraction members, non-members TDW/4 ISO/TR 14468:2010 Selected illustrations of attribute agreement analysis members, non-members MS/6 ISO/IEC :2010 (Edition 6) Information technology. Coding of audio-visual objects. Advanced video coding members, non-members IST/37 Will not be implemented as a British Standard ISO/IEC : Information technology. Coding of audio-visual objects. Scene description and application engine AMENDMENT 7:December 2010 to ISO/IEC : members, 9.64 non-members IST/37 Will not be implemented as a British Standard ISO/IEC : Information technology. Coding of audio-visual objects. Lightweight Application Scene Representation (LASeR) and Simple Aggregation Format (SAF) to ISO/IEC :2008 IST/37 Will not be implemented as a British Standard ISO/IEC : Information technology. Coding of audio-visual objects. Open Font Format to ISO/IEC :2009 IST/37 Will not be implemented as a British Standard ISO/IEC : Information technology. Coding of audio-visual objects. Open Font Format :December 2010 to ISO/IEC : members, 9.64 non-members IST/37 Will not be implemented as a British Standard ISO/TR :2010 Optics and photonics. Microlens arrays. Guidance on testing members, non-members CPW/172/9 ISO 14921:2010 Thermal spraying. Procedures for the application of thermally sprayed coatings for engineering components members, non-members STI/40 ISO/IEC 14957:2010 Information technology. Representation of data element values. Notation of the format members, non-members IST/40 ISO :2010 Road vehicles. Communication between vehicle and external equipment for emissions-related diagnostics. General information and use case definition members, non-members AUE/16 ISO/TR :2010 Calculation of micropitting load capacity of cylindrical spur and helical gears. Introduction and basic principles members, non-members MCE/5/-/15 ISO 15510:2010 Stainless steels. Chemical composition members, non-members ISE/105 ISO :2010 Industrial automation systems and integration. Industrial manufacturing management data. Information modelling for shop floor data acquisition members, non-members AMT/4 Will not be implemented as a British Standard ISO/TS : Industrial automation systems and integration. Integration of life-cycle data for process plants including oil and gas production facilities. Initial reference data :December 2010 to ISO/TS : members, 9.64 non-members AMT/4 Will not be implemented as a British Standard. Is approved as suitable for use in the UK ISO :2010 (Edition 3) Building automation and control systems. Data communication protocol members, non-members RHE/16 ISO 16591:2010 Petroleum products. Determination of sulfur content. Oxidative microcoulometry method members, non-members PTI/13 ISO 17573:2010 Electronic fee collection. Systems architecture for vehicle-related tolling members, non-members EPL/278 ISO 17640:2010 Non-destructive testing of welds. Ultrasonic testing. Techniques, testing levels, and assessment members, non-members WEE/46 ISO/IEC :2010 Information technology. Security techniques. Encryption algorithms. Block ciphers members, non-members IST/33 Update Standards Feb 2011 Prices may be subject to change. 45

46 ISO Publications continued... ISO 18274:2010 Welding consumables. Solid wire electrodes, solid strip electrodes, solid wires and solid rods for fusion welding of nickel and nickel alloys. Classification members, non-members WEE/39 ISO 19142:2010 Geographic information. Web feature service members, non-members IST/36 ISO 19906:2010 Petroleum and natural gas industries. Arctic offshore structures members, non-members B/525/12 ISO 21561: Styrene-butadiene rubber (SBR). Determination of the microstructure of solution-polymerized SBR :December 2010 to ISO 21561: members, 9.64 non-members PRI/23 ISO 22742:2010 Packaging. Linear bar code and twodimensional symbols for product packaging members, non-members PKW/0 Will not be implemented as a British Standard ISO :2010 Industrial trucks. Verification of stability. Rough-terrain variable-reach trucks members, non-members MHE/7 ISO/IEC : Information technology. Multimedia application format (MPEG-A). Professional archival application format to ISO/IEC :2009 IST/37 Will not be implemented as a British Standard ISO/IEC : Information technology. MPEG audio technologies. MPEG surround CORRIGENDUM 3:December 2010 to ISO/IEC :2007 IST/37 Will not be implemented as a British Standard ISO/IEC :2010 Information technology. MPEG extensible middleware (MXM). MXM protocols members, non-members IST/37 Will not be implemented as a British Standard ISO 24501:2010 Ergonomics. Accessible design. Sound pressure levels of auditory signals for consumer products. Auditory signals on consumer products. Sound pressure levels of signals for the elderly and in noisy conditions members, non-members PH/9/1 ISO 24502:2010 Ergonomics. Accessible design. Specification of age-related luminance contrast for coloured light. Guidelines for specification of age-related luminance contrast in visual signs and displays members, non-members PH/9/1 ISO/IEC TR :2010 Information technology for learning, education and training. Supportive technology and specific integration. Platform and Media Taxonomy (PMT) members, non-members IST/43 ISO/IEC :2010 Identification cards. Integrated circuit card programming interfaces. Registration authority procedures for the authentication protocols for interoperability members, non-members IST/17 ISO/IEC 24787:2010 Information technology. Identification cards. On-card biometric comparison members, non-members IST/17 ISO/IEC 26300: Information technology. Open Document Format for Office Applications (OpenDocument) v1.0 to ISO/IEC 26300:2006 IST/41 ISO 27020:2010 Dentistry. Brackets and tubes for use in orthodontics members, non-members CH/106/1 Will not be implemented as a British Standard ISO/IEC :2010 Information technology. Security techniques. Network security. Reference networking scenarios. Threats, design techniques and control issues members, non-members IST/33 ISO :2010 Glass in building. Glass products for structural sealant glazing. Assembly rules members, non-members B/520/4 ISO :2010 Hand-held portable power tools. Test methods for evaluation of vibration emission. Straight grinders members, non-members MCE/8/-/2 ISO :2010 Road vehicles. Methods and criteria for usability evaluation of child restraint systems and their interface with vehicle anchorage systems. Vehicles and child restraint systems equipped with ISOFIX anchorages and attachments members, non-members AUE/7 ISO/IEC : Information technology. Conformance testing methodology for biometric data interchange formats defined in ISO/IEC Generalized conformance testing methodology to ISO/IEC :2009 IST/44 ISO/IEC :2010 Information technology. Conformance testing methodology for biometric data interchange formats defined in ISO/IEC Hand geometry silhouette data members, non-members IST/44 ISO/IEC 29183:2010 Information technology. Office equipment. Method for measuring digital copying productivity of a single one-sided original members, non-members IST/3 ISO 30006:2010 Ship recycling management systems. Diagrams to show the location of hazardous materials onboard ships members, non-members SME/32 ISO 32100:2010 Rubber- or plastics-coated fabrics. Physical and mechanical tests. Determination of flex resistance by the flexometer method members, non-members TCI/69 ISO :2010 Small-bore connectors for liquids and gases in healthcare applications. General requirements members, non-members CH/84/-/1 46 Prices may be subject to change. Update Standards Feb 2011

47 British Standards Online (BSOL) Delivering information and raising standards BSOL works for you by delivering information that reduces your costs and improves efficiency. Used by professionals worldwide, BSOL is the most complete and up to date source of British Standards available. Boost your customers confidence by using the most definitive source of British, adopted European and adopted international standards in the world. BSOL covers a broad range of disciplines for all industry sectors. By subscribing, you can specify the industry groupings that you need. A listing of modules is available at: Delivering tailored information directly to your desktop, this growing resource contains bibliographic details of more than 50,000 publications and allows you to quickly download the full-text of any standard within your subscription. What will you gain by subscribing? Information accessible directly to your desktop. Just browse, search and download the information The most comprehensive British, adopted European and international collection of standards available anywhere in one easy to access portal 24/7 instant unlimited access (subject to terms) Access to draft standards enabling you to help shape your industry s future My notifications alert service ensuring you know when updates have been made to your chosen products Annual subscription for easy budgeting. FREE TRIAL To subscribe and for further information visit: To subscribe online visit or contact BSI Customer Services quoting marketing reference code BSOLA-U Tel +44 (0) Fax +44 (0) orders@bsigroup.com raising standards worldwide Standards and publications may also be ordered via the BSI shop at *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0) BSI British Standards Institution 2010

48 Revised standard BS 3998:2010 Tree work. Recommendations The need for tree work is frequently essential for tree owners and site managers in the course of their regular duties. What is BS 3998? This standard gives general recommendations for tree work and guidance on management options for established trees and overgrown hedges. BS 3998 considers the impact of work on an individual tree in relation to neighbouring trees, but does not cover overall management of tree populations. This is a full revision of the standard, which has been updated and expanded to incorporate changes in the law and working practice concerning established trees, especially with regard to: Safety of people and property Decision-making criteria for tree work Wildlife and habitats Veteran trees. This revision also takes account of underlying issues such as tree longevity, value for local amenity, landscape, biodiversity and heritage. Who is BS 3998 for? This document provides guidance for arboricultural contractors, tree owners or others involved in activities that might affect trees. It outlines potential advantages and disadvantages of various aspects of tree work, and also helps users to identify a course of action to follow. Read more at: To buy online visit or contact BSI Customer Services quoting marketing reference code 3998B-U Tel +44 (0) Fax +44 (0) orders@bsigroup.com raising standards worldwide Standards and publications may also be ordered via the BSI shop at *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0) BSI British Standards Institution 2011