British Standards - Quick Reference Guide

Transcription

1 British Standards - Quick Reference Guide The following British Standards are listed or referred to in this issue of Update Standards with the exception of those in New Work Started. Building and civil engineering BS BS BS , 21 BS BS BS BS BS EN BS EN ISO BS EN ISO BS EN BS EN ISO BS EN BS EN BS EN , 21, 22 BS EN ISO BS EN ISO BS ISO BS ISO BS ISO Consumer products and services BS , 24 BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS DD CEN/TS BS EN ISO BS EN BS EN BS EN BS EN ISO BS EN ISO BS EN ISO BS EN BS EN BS EN BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS ISO BS ISO BS ISO , 27 BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO Electrotechnical BS BS BS BS EN ISO BS EN BS EN BS EN BS EN BS EN BS EN BS EN DD ENV BS ISO BS ISO BS ISO PD ISO/TR Engineering BS BS BS BS BS BS DD CEN/TS DD BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN ISO BS EN BS EN ISO BS EN ISO BS EN ISO BS EN BS EN BS EN ISO BS EN ISO BS EN ISO BS EN BS EN BS EN BS EN BS EN BS EN ISO BS EN ISO BS EN BS EN ISO BS EN ISO BS EN ISO BS EN , 22 BS EN BS EN BS EN ISO BS EN ISO BS EN ISO BS EN BS EN ISO BS EN BS EN BS EN BS EN BS EN ISO BS EN ISO BS EN ISO , 22 BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO , 28 BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO Prices may be subject to change. Update Standards Jan 2009

2 British Standards - Quick Reference Guide continued... BS ISO PD PD ISO/TR BS 4A BS A BS 3G BS G BS 2G BS 2G BS 2G BS 2G BS G BS G BS G BS 2G BS G BS G BS 2G BS 2G BS 2G BS 2G BS 2G BS 3G BS G BS 2G BS G BS G BS 2G BS G BS G BS G BS G BS 3J BS M BS M BS 2SP BS SP Health and environment BS , 25, 26, 27, 29 BS BS DD CEN/TS BS EN , 22 BS EN , 22 BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN BS EN , 14, 22 BS EN ISO BS EN BS EN BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO , 22 BS EN ISO BS EN ISO BS EN ISO BS ISO BS ISO BS ISO BS ISO , 14, 22, 28 BS ISO BS ISO BS ISO BS ISO BS ISO DD ISO/TS DD ISO/TS Information systems BS BS BS EN ISP BS EN ISP BS EN BS ISO/IEC ISP BS ISO/IEC BS ISO/IEC BS ISO/IEC BS ISO/IEC BS ISO/IEC BS ISO/IEC BS ISO/IEC BS ISO/IEC BS ISO/IEC BS ISO/IEC BS ISO/IEC BS ISO/IEC BS ISO/IEC BS IEC PD ISO/IEC TR Management systems BS , 22 BS , 22 BS EN ISO BS EN ISO BS ISO BS ISO BS ISO PD PD ISO/IEC Guide PD ISO/IEC Guide PD ISO/IEC Guide BS OHSAS Materials and chemicals BS BS , 23, 24, 26 BS , 20, 21 BS BS BS , 21 BS BS , 21 BS , 21 BS BS BS , 21 BS BS BS BS BS , 21, 22 BS , 22 BS BS BS BS BS EN ISO , 22 BS EN BS EN BS EN BS EN ISO BS EN ISO BS EN BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO , 21 BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO , 22 BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN BS EN BS EN ISO BS EN ISO BS EN BS EN BS EN , 22 BS EN ISO BS EN ISO BS EN ISO BS EN ISO , 21, 22 BS ISO BS ISO , 21 BS ISO BS ISO BS ISO , 22 BS ISO BS ISO BS ISO BS ISO BS ISO DD ISO/TS Update Standards Jan 2009 Prices may be subject to change. 5

3 Alpha-numeric sequence of British Standards Alpha-numeric sequence of British Standards quoted in this issue BS , 24 BS BS BS BS BS BS BS BS BS BS BS BS , 23, 24, 26 BS , 20, 21 BS BS BS BS BS , 21 BS BS , 21 BS , 21 BS BS BS BS , 21 BS BS BS BS BS , 25, 26, 27, 29 BS BS , 21 BS BS BS BS BS BS BS BS , 21, 22 BS , 22 BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS , 22 BS BS BS , 22 BIP DD CEN/TS DD CEN/TS DD CEN/TS DD BS EN , 22 BS EN , 22 BS EN BS EN BS EN ISO , 22 BS EN ISO BS EN BS EN BS EN ISP BS EN ISP BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN ISO BS EN ISO BS EN BS EN BS EN BS EN BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO , 21 BS EN BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO , 22 BS EN BS EN BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN BS EN BS EN BS EN BS EN ISO BS EN BS EN BS EN BS EN BS EN BS EN ISO BS EN ISO BS EN BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN , 22 BS EN BS EN BS EN BS EN ISO BS EN ISO BS EN BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN BS EN ISO BS EN BS EN , 14, 22 BS EN BS EN ISO BS EN ISO BS EN , 21, 22 BS EN BS EN BS EN BS EN BS EN BS EN ISO BS EN BS EN ISO BS EN ISO , 22 BS EN ISO BS EN ISO BS EN BS EN BS EN BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO Prices may be subject to change. Update Standards Jan 2009

4 Alpha-numeric sequence of British Standards continued... BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO , 22 BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN , 22 BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO , 21, 22 BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN DD ENV BS ISO BS ISO/IEC ISP BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO , 21 BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO , 27 BS ISO BS ISO BS ISO/IEC BS ISO BS ISO BS ISO/IEC BS ISO/IEC BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO , 28 BS ISO/IEC BS ISO/IEC BS ISO BS ISO/IEC BS ISO , 22 BS ISO BS ISO/IEC BS ISO , 14, 22, 28 BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO/IEC BS ISO BS ISO/IEC BS ISO BS ISO/IEC BS ISO BS ISO BS ISO BS ISO/IEC BS ISO BS ISO BS ISO/IEC BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO/IEC BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS IEC DD ISO/TS DD ISO/TS DD ISO/TS PD PD PD ISO/TR PD ISO/IEC TR PD ISO/TR PD ISO/IEC Guide PD ISO/IEC Guide PD ISO/IEC Guide BS 4A BS A BS 3G BS G BS 2G BS 2G BS 2G BS 2G BS G BS G BS G BS 2G BS G BS G BS 2G BS 2G BS 2G BS 2G BS 2G BS 3G BS G BS 2G BS G BS G BS 2G BS G BS G BS G BS G BS 3J BS M BS M BS 2SP BS SP BS OHSAS PAS Help Us to Help You! Always quote your Customer Number Don t know your number? Contact Customer Services who will be happy to check it for you 8 Prices may be subject to change. Update Standards Jan 2009

5 British Standards BRITISH STANDARDS The following British Standard publications are available from BSI Customer Services (see How to order on page 2). The publications listed below are new and revised British Standards that were made available last month. An existing BSI publication bearing a number identical to one announced below is automatically withdrawn unless stated otherwise. In all other cases of supersession, details are given and a corresponding entry appears in the British Standards withdrawn section. BRITISH STANDARD IMPLEMENTATIONS WILL BE SUPPLIED IN PREFERENCE TO EUROPEAN OR INTERNATIONAL STANDARDS, UNLESS OTHERWISE REQUESTED. Please order by the British Standard reference not the ISBN number. BS 2000 series standards are also available from: Library of the Energy Institute 61 New Cavendish Street London W1G 7AR Tel: Fax: lis@energyinst.org.uk For this series, member pricing is applicable to BSI and Energy Institute members. BS 817:2008 Specification for surface plates supersedes BS 817:1988 ISBN TDW/4 BS 870:2008 Specification for external micrometers supersedes BS 870:1950 ISBN TDW/4 BS 887:2008 Precision vernier callipers. Requirements and test methods supersedes BS 887:1982 ISBN TDW/4 BS 907:2008 Specification for dial gauges for linear measurement supersedes BS 907:1965 ISBN TDW/4 BS 959:2008 Specification for internal micrometers (including stick micrometers) supersedes BS 959:1950 ISBN TDW/4 BS 1044: Specification for gauge blanks BS :2008 Plug, ring and calliper gauges supersedes BS :1964 ISBN members, non-members TDW/4 BS 1643:2008 Specification for precision vernier height gauges supersedes BS 1643:1983 ISBN TDW/4 BS 1685:2008 Bevel protractors (mechanical and optical). Requirements and test methods supersedes BS 1685:1951 ISBN TDW/4 BS 3193:2008 Specification for thermally toughened glass panels for use in domestic appliances supersedes BS 3193:1993 ISBN CW/33 BS 5444:2008 Physical attributes of documents for microfilming or scanning. Code of practice supersedes BS 5444:1977 ISBN IDT/1/2 BS 6073: Precast concrete masonry units BS :2008 Guide for specifying precast concrete masonry units supersedes BS :1981 ISBN B/519/1 BS 6100: Building and civil engineering. Vocabulary BS :2008 Plant, equipment and persons supersedes BS :1991 and BS :1985 ISBN members, non-members B/500/-/1 BS 6365:2008 Specification for precision vernier depth gauges supersedes BS 6365:1983 ISBN TDW/4 BS 6396:2008 Electrical systems in office furniture and educational furniture. Specification supersedes BS 6396:2002 ISBN FW/0/3 BS 6468:2008 Specification for depth micrometers supersedes BS 6468:1984 ISBN TDW/4 BS 7592:2008 Sampling for Legionella bacteria in water systems. Code of practice supersedes BS 7592:1992 ISBN members, non-members EH/3/4 BS 7629: Electric cables. Specification for 300/500 V fire resistant screened cables having low emission of smoke and corrosive gases when affected by fire BS :2008 Multicore and multipair cables supersedes BS :1997 and BS :1997 ISBN GEL/20 BS 7909:2008 Code of practice for temporary electrical systems for entertainment and related purposes supersedes BS 7909:1998 ISBN members, non-members CPW/4 10 Prices may be subject to change. Update Standards Jan 2009

6 BS 8479:2008 Textiles. Method for determination of the propensity of fabrics to snagging. Rotating chamber method ISBN TCI/24 BS 8498:2008 British Standards for screw threads and screw gauges. Introduction and guidance ISBN FME/9 BS 8507: Code of practice for close protection services BS :2008 Services within the United Kingdom ISBN GW/3 BS 8888:2008 Technical product specification. Specification supersedes BS 8888:2006 ISBN members, non-members TDW/4 BS 10008:2008 Evidential weight and legal admissibility of electronic information. Specification ISBN members, non-members IDT/1/3 BS 18004:2008 Guide to achieving effective occupational health and safety performance supersedes BS 8800:2004 ISBN members, non-members HS/1 BS OHSAS 18002:2008 Occupational health and safety management systems. Guidelines for the implementation of OHSAS 18001:2007 ISBN members, non-members HS/1 OHSAS 18002:2008 Occupational health and safety management systems. Guidelines for the implementation of OHSAS 18001:2007 supersedes OHSAS 18002:2000 ISBN members, non-members HS/1 NA to BS EN 1993: UK National Annex to Eurocode 3. Design of steel structures NA to BS EN :2005 General rules. Structural fire design ISBN B/525/31 NA to BS EN :2005 Design of joints ISBN B/525/31 NA to BS EN 1999: UK National Annex to Eurocode 9. Design of aluminium structures NA to BS EN :2007 General structural rules ISBN B/525/9 NA to BS EN :2007 Structures susceptible to fatigue ISBN B/525/9 BS EN PUBLICATIONS The following are British Standard implementations of the English language versions of European Standards (ENs). BSI has an obligation to publish all ENs and to withdraw any conflicting British Standards. This has led to a series of standards, BS ENs, using the EN number. Note: The date referenced in the identifier is the date of the European standard. BS EN 485: Aluminium and aluminium alloys. Sheet, strip and plate BS EN 485-2:2008 Mechanical properties supersedes BS EN 485-2:2007 ISBN members, non-members NFE/35/5 BS EN ISO 638:2008 Paper, board and pulps. Determination of dry matter content. Oven-drying method supersedes BS EN 20638:1993 ISBN PAI/11 BS EN ISO 707:2008 Milk and milk products. Guidance on sampling supersedes BS EN ISO 707:1997 ISBN members, non-members AW/5 BS EN 747: Furniture. Bunk beds and high beds for domestic use BS EN 747-1:2007 Safety, strength and durability requirements supersedes BS EN 747-1:1993 ISBN CW/41 BS EN 747-2:2007 Test methods supersedes BS EN 747-2:1993 ISBN CW/41 BS EN 1176: Playground equipment and surfacing BS EN :2008 Additional specific safety requirements and test methods for fully enclosed play equipment partially supersedes BS 8409:2002 ISBN SW/65 BS EN ISO 2898: Plastics. Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials BS EN ISO :2008 Preparation of test specimens and determination of properties supersedes BS EN ISO :2000 ISBN PRI/82 BS EN 3637:2008 Aerospace series. Nuts, self-locking, bihexagonal (double reduced), in heat resisting nickel base alloy. NI-P101HT (Waspaloy), silver plated, Classification: 1210 MPa/730 C ISBN Update Standards Jan 2009 Prices may be subject to change. 11

7 BS EN Publications continued... BS EN ISO 4373:2008 Hydrometry. Water level measuring devices supersedes BS :2000 ISBN CPI/113/5 BS EN 4384:2007 Aerospace series. Heat resisting alloy NI-CH1303 (NiCo20Cr20Mo5Ti2Al). Non heat treated. Remelting stock ISBN ACE/61/-/48 BS EN ISO 5771:2008 Rubber hoses and hose assemblies for transferring anhydrous ammonia. Specification supersedes BS EN ISO 5771:1996 ISBN PRI/66 BS EN ISO 7731:2008 Ergonomics. Danger signals for public and work areas. Auditory danger signals supersedes BS EN ISO 7731:2005 ISBN PH/9/1 BS EN ISO 9001:2008 Quality management systems. Requirements supersedes BS EN ISO 9001:2000 ISBN QS/1 Also available as part of KIT 46. BS EN ISO 9073: Textiles. Test methods for nonwovens BS EN ISO :2008 Determination of drapability including drape coefficient supersedes BS EN ISO :1998 ISBN TCI/24 BS EN ISO 12004: Metallic materials. Sheet and strip. Determination of forming-limit curves BS EN ISO :2008 Measurement and application of forming-limit diagrams in the press shop ISBN ISE/NFE/4/2 BS EN ISO :2008 Determination of forming-limit curves in the laboratory ISBN members, non-members ISE/NFE/4/2 BS EN 12393: Foods of plant origin. Multiresidue methods for the gas chromatographic determination of pesticide residues BS EN :2008 General considerations supersedes BS EN :1999 ISBN AW/-/3 BS EN :2008 Methods for extraction and clean-up supersedes BS EN :1999 ISBN members, non-members AW/-/3 BS EN :2008 Determination and confirmatory tests supersedes BS EN :1999 ISBN AW/-/3 BS EN 12859:2008 Gypsum blocks. Definitions, requirements and test methods supersedes BS EN 12859:2001 ISBN members, non-members B/544/1 BS EN 13138: Buoyant aids for swimming instruction BS EN :2008 Safety requirements and test methods for buoyant aids to be worn supersedes BS EN :2003 ISBN SW/136 BS EN 13141: Ventilation for buildings. Performance testing of components/products for residential ventilation BS EN :2008 Externally mounted humidity controlled air transfer device ISBN RHE/2 BS EN :2008 Humidity controlled extract air terminal device ISBN RHE/2 BS EN ISO 13753:2008 Mechanical vibration and shock. Hand-arm vibration. Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system supersedes BS EN ISO 13753:1999 ISBN GME/21/6 BS EN ISO 14113:2008 Gas welding equipment. Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) supersedes BS EN ISO 14113:1997 ISBN WEE/18 BS EN ISO 14509: Small craft. Airborne sound emitted by powered recreational craft BS EN ISO :2008 Pass-by measurement procedures supersedes BS EN ISO 14509:2001 ISBN GME/33 BS EN 15004: Fixed firefighting systems. Gas extinguishing systems BS EN :2008 Design, installation and maintenance supersedes BS ISO :2006 ISBN members, non-members FSH/18/6 Also available as part of KIT 105. BS EN :2008 Physical properties and system design of gas extinguishing systems for FK extinguishant supersedes BS ISO :2006 ISBN FSH/18/6 Also available as part of KIT 105. BS EN :2008 Physical properties and system design of gas extinguishing systems for HCFC Blend A extinguishant supersedes BS ISO :2006 ISBN FSH/18/6 Also available as part of KIT Prices may be subject to change. Update Standards Jan 2009

8 BS EN Publications continued... BS EN :2008 Physical properties and system design of gas extinguishing systems for HFC 125 extinguishant supersedes BS ISO :2006 ISBN FSH/18/6 Also available as part of KIT 105. BS EN :2008 Physical properties and system design of gas extinguishing systems for HFC 227ea extinguishant supersedes BS ISO :2006 ISBN FSH/18/6 Also available as part of KIT 105. BS EN :2008 Physical properties and system design of gas extinguishing systems for HFC 23 extinguishant supersedes BS ISO :2005 ISBN FSH/18/6 Also available as part of KIT 105. BS EN 15116:2008 Ventilation in buildings. Chilled beams. Testing and rating of active chilled beams ISBN RHE/2 BS EN 15327: Railway applications. Passenger alarm subsystem BS EN :2008 General requirements and passenger interface for the passenger emergency brake system ISBN RAE/4 BS EN 15355:2008 Railway applications. Braking. Distributor valves and distributor-isolating devices ISBN members, non-members RAE/4 BS EN 15389:2008 Industrial valves. Performance characteristics of thermoplastic valves when used as construction products ISBN PSE/7/16 BS EN 15423:2008 Ventilation for buildings. Fire precaution for air distribution systems in buildings ISBN RHE/2 BS EN 15445:2008 Fugitive and diffuse emissions of common concern to industry sectors. Qualification of fugitive dust sources by reverse dispersion modelling ISBN EH/2/1 BS EN 15514:2007 Chemicals used for treatment of swimming pool water. Hydrochloric acid ISBN CII/59 BS EN ISO 15548: Non-destructive testing. Equipment for eddy current examination BS EN ISO :2008 Instrument characteristics and verification supersedes BS EN :2003 ISBN members, non-members WEE/46 BS EN ISO :2008 Probe characteristics and verification supersedes BS EN :2003 ISBN members, non-members WEE/46 BS EN ISO :2008 System characteristics and verification supersedes BS EN :2003 ISBN WEE/46 BS EN 15613:2008 Knee and elbow protectors for indoor sports. Safety requirements and test methods ISBN PH/3/11 BS EN 15619:2008 Rubber or plastic coated fabrics. Safety of temporary structures (tents). Specification for coated fabrics intended for tents and related structures ISBN TCI/69 BS EN 15637:2008 Foods of plant origin. Determination of pesticide residues using LC-MS/MS following methanol extraction and clean-up using diatomaceous earth ISBN members, non-members AW/-/3 BS EN ISO 15743:2008 Ergonomics of the thermal environment. Cold workplaces. Risk assessment and management ISBN members, non-members PH/9/1 BS EN ISO 16634: Food products. Determination of the total nitrogen content by combustion according to the Dumas principle and calculation of the crude protein content BS EN ISO :2008 Oilseeds and animal feeding stuffs ISBN members, non-members AW/4 BS EN ISO 17491: Protective clothing. Test methods for clothing providing protection against chemicals BS EN ISO :2008 Determination of resistance to penetration by a jet of liquid (jet test) supersedes BS EN 463:1995 ISBN PH/3/3 BS EN ISO :2008 Determination of resistance to penetration by a spray of liquid (spray test) supersedes BS EN 468:1995 ISBN PH/3/3 BS EN ISO 20643:2008 Mechanical vibration. Hand-held and handguided machinery. Principles for evaluation of vibration emission supersedes BS EN ISO 20643:2005 ISBN GME/21/6 BS EN ISO 27874:2008 Metallic coatings. Electrodeposited gold and gold alloy coatings for electrical, electronic and engineering purposes. Specification and test methods supersedes BS :1989, BS :1986, BS :1986 and BS :1986 ISBN members, non-members STI/33 14 Prices may be subject to change. Update Standards Jan 2009

9 BS ENs IMPLEMENTED BY AMENDMENT For the standards listed below see also the Amendments to British Standards and Updated British Standards sections of this issue of Update Standards. BS EN ISO 15750: Packaging. Steel drums BS EN ISO :2008 Removable head (open head) drums with a minimum total capacity of 208 l, 210 l and 216,5 l PKW/0/-/4 Implementation of European Standard EN ISO by amendment to BS ISO :2002. BS EN ISO :2008 Non-removable head (tight head) drums with a minimum total capacity of 212 l, 216,5 l and 230 l PKW/0/-/4 Implementation of European Standard EN ISO by amendment to BS ISO :2002. BS EN ISO 20848: Packaging. Plastics drums BS EN ISO :2008 Removable head (open head) drums with a nominal capacity of 113,6 l to 220 l PKW/0/-/4 Implementation of European Standard EN ISO by amendment to BS ISO :2006. BS EN ISO :2008 Non-removable head (tight head) drums with a nominal capacity of 208,2 l and 220 l PKW/0/-/4 Implementation of European Standard EN ISO by amendment to BS ISO :2006. BS EN ISO :2008 Plug/bung closure systems for plastics drums with a nominal capacity of 113,6 l to 220 l PKW/0/-/4 Implementation of European Standard EN ISO by amendment to BS ISO :2006. BS EN 62264: Enterprise-control system integration BS EN :2008 Object model attributes AMT/7 Implementation of European Standard EN by amendment to BS IEC :2004. BS IMPLEMENTATIONS BS Implementations comprise the ISO or IEC text without any national deviation and with front and back cover indicating the UK committee responsible. No other information will normally be added. Note: The date referenced in the identifier is the date of the international standard. BS ISO 4706:2008 Gas cylinders. Refillable welded steel cylinders. Test pressure 60 bar and below ISBN members, non-members PVE/3/3 BS ISO 5145:2004+A2:2008 Cylinder valve outlets for gases and gas mixtures. Selection and dimensioning ISBN members, non-members PVE/3/1 BS ISO 5435:2008 Rubber compounding ingredients. Carbon black. Determination of tinting strength supersedes BS :1995 ISBN PRI/50 BS ISO 6780:2003 Flat pallets for intercontinental materials handling. Principal dimensions and tolerances supersedes BS ISO 6780:1988 ISBN PKW/0/-/11 BS ISO 7573:2008 Technical product documentation. Parts lists supersedes BS ISO 7573:1983 ISBN TDW/4 BS ISO 8406:2008 Tools for moulding. Mould bases. Round locating elements and spacers supersedes BS ISO 8406:2001 ISBN MTE/12 your order orders@bsigroup.com BS ISO 10907: Tools for moulding. Locating rings BS ISO :2008 Locating rings for mounting without thermal insulating sheets in small or medium moulds (types A and B) ISBN MTE/12 BS ISO 11900: Tools for pressing. Ball-lock punch retainers BS ISO :2008 Types C and D, reduced for light duty supersedes BS ISO :2001 ISBN MTE/12 BS ISO 13885: Binders for paints and varnishes. Gel permeation chromatography (GPC) BS ISO :2008 Tetrahydrofuran (THF) as eluent supersedes BS :1999 ISBN STI/3 BS ISO 15484:2008 Road vehicles. Brake lining friction materials. Product definition and quality assurance ISBN AUE/11 BS ISO 16000: Indoor air BS ISO :2008 Determination of total (gas and particle-phase) polychlorinated dioxin-like biphenyls (PCBs) and polychlorinated dibenzo-pdioxins/dibenzofurans (PCDDs/PCDFs). Collection on sorbent-backed filters ISBN members, non-members EH/2/3 BS ISO 18437: Mechanical vibration and shock. Characterization of the dynamic mechanical properties of visco-elastic materials BS ISO :2008 Dynamic stiffness method ISBN GME/21 Update Standards Jan 2009 Prices may be subject to change. 15

10 BS Implementations continued... BS ISO 18921:2008 Imaging materials. Compact discs (CD-ROM). Method for estimating the life expectancy based on the effects of temperature and relative humidity supersedes BS ISO 18921:2002 ISBN CPW/42 BS ISO 18925:2008 Imaging materials. Optical disc media. Storage practices supersedes BS ISO 18925:2002 ISBN CPW/42 BS ISO 18927:2008 Imaging materials. Recordable compact disc systems. Method for estimating the life expectancy based on the effects of temperature and relative humidity supersedes BS ISO 18927:2002 ISBN members, non-members CPW/42 BS ISO 20860: Road vehicles. 50 ohms impedance radio frequency connection system interface BS ISO :2008 Dimensions and electrical requirements ISBN AUE/9 BS ISO 21212:2008 Intelligent transport systems. Communications access for land mobiles (CALM). 2G Cellular systems ISBN EPL/278 BS ISO 21213:2008 Intelligent transport systems. Communications access for land mobiles (CALM). 3G Cellular systems ISBN EPL/278 BS ISO 21927: Smoke and heat control systems BS ISO :2008 Specification for smoke barriers ISBN members, non-members FSH/25 BS ISO 22734: Hydrogen generators using water electrolysis process BS ISO :2008 Industrial and commercial applications ISBN members, non-members PVE/3/8 BS ISO 22901: Road vehicles. Open diagnostic data exchange (ODX) BS ISO :2008 Data model specification ISBN members, non-members AUE/16 BS ISO 26424:2008 Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of the abrasion resistance of coatings by a micro-scale abrasion test ISBN RPI/13 BS ISO 26622: Modular taper interface with ball track system BS ISO :2008 Dimensions and designation of shanks ISBN MTE/15 BS ISO :2008 Dimensions and designation of receivers ISBN MTE/15 BS ISO 26623: Polygonal taper interface with flange contact surface BS ISO :2008 Dimensions and designation of shanks ISBN MTE/15 BS ISO :2008 Dimensions and designation of receivers ISBN MTE/15 BS ISO 28702:2008 Rubber and plastics hoses and tubing. Textilereinforced types. Sub-ambient temperature crush test ISBN PRI/66 PUBLISHED DOCUMENTS PD 5500:2006+A3:2008 Specification for Unfired fusion welded pressure vessels supersedes PD 5500:2003 ISBN members, non-members PVE/1 PD ISO/TR 11955:2008 Hybrid-electric road vehicles. Guidelines for charge balance measurement ISBN PEL/69 PD ISO/TR 22694:2008 Gas cylinders. Methods for establishing acceptance/rejection criteria for flaws in seamless steel and aluminium alloy cylinders at time of periodic inspection and testing ISBN members, non-members PVE/3/7 DRAFTS FOR DEVELOPMENT DD CEN/TS 81: Safety rules for the construction and installation of lifts. Existing lifts DD CEN/TS 81-82:2008 Improvement of the accessibility of existing lifts for persons including persons with disability ISBN members, non-members MHE/4 DD 8483:2008 Cranes. Condition monitoring. Specification for data logging equipment ISBN MHE/3/11 DD CEN/TS 15754:2008 Animal feeding stuffs. Determination of sugar content. High performance exchange chromatographic method (HPAEC-PAD) ISBN AW/10 16 Prices may be subject to change. Update Standards Jan 2009

11 AEROSPACE SERIES BS 2SP 90:2008 Specification for corrosion-resisting steel split cotter pins for aircraft. Inch series supersedes BS SP 90:1961 ISBN PUBLICLY AVAILABLE SPECIFICATIONS Publicly Available Specifications (formerly Product Assessment Specifications) are issued to provide an interim document where there is a market need but where a full British or European Standard has yet to be published. PAS 500:2008 National specification for travel plans ISBN members, non-members SPECIALIST BOOKS FROM BSI BIP 2154:2008 Good Governance: A risk-based management systems approach to internal control ISBN members, non-members AMENDMENTS TO BRITISH STANDARDS Most amendments are not issued separately. Those that make significant changes to a standard are incorporated into the standard which is re-issued as a new edition (see Updated British Standards ). Amendments which make smaller changes or corrections are available on request, free of charge to past purchasers of the standard. All amendments to date of despatch are included within any main publication when ordered for the first time. The following amendments to British Standards were made available last month. BS EN 1797:2001 Cryogenic vessels. Gas/material compatibility CORRIGENDUM 1 PVE/18 BS EN ISO 10081: Classification of dense shaped refractory products BS EN ISO :2005 Basic products containing less than 7% residual carbon CORRIGENDUM 3 RPI/1 Also incorporates Corrigenda 1 & 2. BS EN 10293:2005 Steel castings for general engineering uses CORRIGENDUM 1 ISE/6 BS EN 14035: Fireworks BS EN :2004 Roman candles. Specification and test methods CORRIGENDUM 1 CII/47 BS EN 14891:2007 Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives. Requirements, test methods, evaluation of conformity, classification and designation CORRIGENDUM 1 B/539 BS EN 15287: Chimneys. Design, installation and commissioning of chimneys BS EN :2007 Chimneys for non-roomsealed heating appliances CORRIGENDUM 1 B/506 BS EN :2008 Chimneys for roomsealed appliances CORRIGENDUM 1 B/506 BS EN 50121: Railway applications. Electromagnetic compatibility BS EN :2006 General CORRIGENDUM 1 GEL/9 BS EN 61326: Electrical equipment for measurement, control and laboratory use. EMC requirements BS EN :2006 General requirements CORRIGENDUM 1 GEL/65/1 BS ISO/IEC 10116:2006 Information technology. Security techniques. Modes of operation for an n-bit cipher CORRIGENDUM 1 IST/33 BS ISO/IEC 19794: Information technology. Biometric data interchange formats BS ISO/IEC :2005+A1:2007 Face image data CORRIGENDA 1 & 2 IST/44 Also incorporates Amendment 1. UPDATED BRITISH STANDARDS The following standards have been amended and the amendments have been incorporated into an updated standard. NOTE: Updated British Standards must be reordered as the amendments are not available separately. BS EN 626: Safety of machinery. Reduction of risks to health from hazardous substances emitted by machinery BS EN 626-1:1994+A1:2008 Principles and specifications for machinery manufacturers MCE/3 BS EN 626-2:1996+A1:2008 Methodology leading to verification procedures MCE/3 BS EN 818: Short link chain for lifting purposes. Safety BS EN 818-2:1996+A1:2008 Medium tolerance chain for chain slings. Grade 8 MHE/1 BS EN 818-6:2000+A1:2008 Chain slings. Specification for information for use and maintenance to be provided by the manufacturer MHE/1 BS EN 1037:1995+A1:2008 Safety of machinery. Prevention of unexpected start-up MCE/3 Update Standards Jan 2009 Prices may be subject to change. 17

12 Updated British Standards continued... BS EN 1088:1995+A2:2008 Safety of machinery. Interlocking devices associated with guards. Principles for design and selection AMENDMENT members, non-members MCE/3 Also incorporates Amendment 1. BS EN 1093: Safety of machinery. Evaluation of the emission of airborne hazardous substances BS EN :2006+A1:2008 Test bench method for the measurement of the emission rate of a given pollutant MCE/3 BS EN :1998+A1:2008 Separation efficiency by mass, unducted outlet MCE/3 BS EN :1998+A1:2008 Pollutant concentration parameter, test bench method MCE/3 BS EN 1466:2004+A1:2007 Child care articles. Carry cots and stands. Safety requirements and test methods CW/39 BS EN 1646: Leisure accommodation vehicles. Motor caravans BS EN :2004+A1:2008 Habitation requirements relating to health and safety members, non-members B/511 BS EN 10280:2001+A1:2007 Magnetic materials. Methods of measurement of the magnetic properties of electrical sheet and strip by means of a single sheet tester ISE/NFE/5 BS EN 12053:2001+A1:2008 Safety of industrial trucks. Test methods for measuring noise emissions MHE/7 Also incorporates Corrigenda 1 & 2. BS EN 13059:2002+A1:2008 Safety of industrial trucks. Test methods for measuring vibration MHE/7 BS EN 13586:2004+A1:2008 Cranes. Access members, non-members MHE/3 BS EN 14707:2005+A1:2007 Thermal insulating products for building equipment and industrial installations. Determination of maximum service temperature for preformed pipe insulation B/540/8 BS EN 60115: Fixed resistors for use in electronic equipment BS EN :2001+A1:2001 Generic specification members, non-members EPL/40X Also incorporates Amendment 1. BS EN 60335: Household and similar electrical appliances. Safety BS EN :2003+A2:2008 Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances AMENDMENT members, non-members CPL/61/07 Also incorporates Amendment 1 and Corrigendum 1. BS EN :2003+A1:2008 Particular requirements for appliances for skin or hair care CPL/61/01 Also incorporates Corrigenda 1 & 2. BS EN :2003+A1:2008 Particular requirements for clocks CPL/61/01 BS EN :2003+A1:2008 Particular requirements for sewing machines CPL/61/01 BS EN :2002+A1:2008 Particular requirements for ironers CPL/61/07 BS EN :2002+A1:2008 Particular requirements for portable heating tools and similar appliances CPL/61/07 BS EN :2003+A1:2008 Particular requirements for stationary circulation pumps for heating and service water installations CPL/61/01 BS EN :2003+A1:2008 Particular requirements for oral hygiene appliances CPL/61/01 BS EN :2003+A1:2008 Particular requirements for electrical appliances for use with aquariums and garden ponds CPL/61/01 BS EN :2003+A1:2008 Particular requirements for projectors and similar appliances CPL/61/01 BS EN :2003+A1:2008 Particular requirements for air-cleaning appliances CPL/61/01 Also incorporates Corrigendum 1. BS EN :2003+A1:2008 Particular requirements for water-bed heaters CPL/61/07 Also incorporates Corrigendum 1. BS EN :2003+A1:2008 Particular requirements for outdoor barbecues CPL/61/07 BS EN :2002+A1:2008 Particular requirements for heated gullies for roof drainage CPL/61/07 BS EN :2003+A1:2008 Particular requirements for fabric steamers CPL/61/07 18 Prices may be subject to change. Update Standards Jan 2009

13 SPECIAL ANNOUNCEMENTS Comments can be sent by or by post to named contacts at: BSI Head Office 389 Chiswick High Road London W4 4AL Tel: BS EN 50216: Power transformer and reactor fittings BS EN Oil and winding temperature indicators This standard, which will be available shortly, implements verbatim EN :2008. EN covers oil temperature and winding temperature (thermal image) indicators of the interchangeable mechanical (not electronic) type with contacts for use with liquid immersed power transformers and reactors for indoor or outdoor installation. This standard defines the characteristics of the instruments in order to ensure the interchangeability achieving the same performance. Except where otherwise specified or implied herein, oil and winding temperature indicators shall comply with the requirements of EN Contact: Keith Stiles PEL/14 BS EN 60950: Information technology equipment. Safety BS EN :2006/Amendment 1 Equipment installed outdoors This reflects the amendment which modifies the European Standard EN :2006 in Annex ZB, by deleting the special national conditions for Finland, Norway and Sweden regarding Subclauses 4.1, 10.2 & D.3 and adding There are no special national conditions for this European Standard. Contact: Keith Stiles keith.stiles@bsigroup.com EPL/108 Please do not send confirmation of orders placed by telephone as it can lead to duplication BRITISH STANDARDS REVIEWED AND CONFIRMED It is BSI policy for every standard to be reviewed by the technical committee responsible not more than five years after publication, to establish whether it is still current and, if it is not, to identify and set in hand appropriate action. Confirmation indicates the continuing currency of a standard. Where any standard in this list has been amended since publication, confirmation includes all amendments published to date. Reference to a particular amendment indicates that it is published concurrently with the confirmation. BS 779:1989 Specification for cast iron boilers for central heating and indirect hot water supply (rated output 44 kw and above) RHE/10 BS 2782: Methods of testing plastics. Thermoplastics pipes, fittings and valves BS :Method 1109A:1989 Resistance to environmental stress cracking of polyethylene pipes and fittings for non-pressure applications PRI/88 BS 3506:1969 Specification for unplasticized PVC pipe for industrial uses PRI/88 BS 3518: Methods of fatigue testing BS :1993 Guide to general principles ISE/NFE/4/6 BS :1962 Rotating bending fatigue tests ISE/NFE/4/6 BS :1963 Direct stress fatigue tests ISE/NFE/4/6 BS 4346: Joints and fittings for use with unplasticized PVC pressure pipes BS :1982 Specification for solvent cement PRI/88 BS 4962:1989 Specification for plastics pipes and fittings for use as subsoil field drains PRI/88 BS 4991:1974 Specification for propylene copolymer pressure pipe PRI/88 BS 5045: Transportable gas containers BS :1987 Specification for seamless containers of less than 0.5 litre water capacity PVE/3/3 BS 5931:1980 Code of practice for machine laid in situ edge details for paved areas B/507 BS 6209:1982 Specification for solvent cement for nonpressure thermoplastics pipe systems PRI/88 BS 6464:1984 Specification for reinforced plastics pipes, fittings and joints for process plants PRI/88 BS 6920: Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water BS :2000 Methods of test. Appearance of water EH/6 BS 7159:1989 Code of practice for design and construction of glass-reinforced plastics (GRP) piping systems for individual plants or sites PRI/88 BS 7363:1990 Method for bead-on-plate (BOP) test for welds WEE/2 BS 8407:2002 Specification for mechanical and spliced joints in conveyor belting for use underground PRI/67 BS EN 14530:2004 Workplace atmospheres. Determination of diesel particulate matter. General requirements EH/2/2 DD CEN/TS 15279:2006 Workplace exposure. Measurement of dermal exposure. Principles and methods EH/2/2 BS EN 27963:1992 Specification for calibration block No. 2 for ultrasonic examination of welds WEE/46 Update Standards Jan 2009 Prices may be subject to change. 19

14 British Standards Reviewed and Confirmed continued... BS 4A 4:1966 Test pieces and test methods for metallic materials for aircraft. Metric units ACE/61 BS A 22:1947 Units of measurement in civil aviation BS 3G 101:1987 Specification for general requirements for mechanical and electromechanical aircraft indicators BS G 102:1971 Specification for general requirements for rotating electrical machinery BS 2G 111:1955 Specification for rate of climb indicators for aircraft BS 2G 114:1953 Specification for direct current ratiometer indicators for aircraft BS 2G 115:1956 Specification for sensitive altimeters for aircraft BS 2G 117:1975 Specification for pressure-driven airspeed indicators BS G 118:1949 Specification for aircraft magnetic compass, direct-reading BS G 122:1949 Specification for aircraft magnetic compass, remote-reading (gyro-stabilized) BS G 123:1949 Specification for aircraft magnetic compass, remote-reading (non-stabilized) BS 2G 124: Specification for A.C. generators for aircraft BS 2G 124-1:1966 Constant frequency BS 2G 124-2:1966 Variable frequency BS G 125:1950 Specification for turn and slip indicators for aircraft purposes BS G 133:1951 Specification for electro-magnetic indicators for extra low voltage aircraft systems BS 2G 134:1970 Specification for D.C. generators BS 2G 135:1967 Specification for electrically-heated pitot and pitotstatic pressure heads BS 2G 143:1965 Specification for A.C. and D.C. rotary and linear actuators for aircraft BS 2G 146:1966 Specification for D.C. motors for aircraft BS 2G 147: Specification for A.C. motors for aircraft BS 2G 147-1:1966 Three-phase constant frequency squirrel-cage induction motors BS 2G 147-2:1966 Three-phase variable frequency squirrel-cage induction motors BS 3G 148:1981 Specification for general purpose platinum temperature sensors for aircraft BS G 152:1956 Specification for A.C. electrically-operated artificial horizons for aircraft BS 2G 182:1975 Specification for pressure-driven machmeters for aircraft BS G 183:1963 Specification for interconnections in analogue data transmission systems in aircraft BS G 190:1964 Specification for cabin altimeters for aircraft BS 2G 199:1984 Schedule for tables relating to altitudes, airspeed and Mach numbers for use in aeronautical instrument design and calibration BS G 211:1971 Specification for reflection-reducing coating of instrument windows and lighting wedges BS G 226:1979 Specification for counter and pointer, servo type, pressure altimeter systems BS G 234:1984 Specification for self-aligning air flow angle transmitters for use on aircraft BS G 240:1988 Specification for pressure transducers for use on aircraft BS 3J 12:1991 Specification for pressure-sensitive adhesive identification tape BS M 22:1949 Specification for silica gel acid activated for aircraft purposes BS M 43:1973 Methods of zoning aircraft and referencing access doors and panels BRITISH STANDARDS DECLARED OBSOLESCENT Declaration of obsolescence indicates that the standard is not recommended for use in new equipment but needs to be retained for the servicing of existing equipment that is expected to have a long working life. BS 490: Conveyor and elevator belting BS 490-2:1975 Rubber and plastics belting of textile construction for use on bucket elevators PRI/67 This standard has been declared obsolescent as all other parts of BS 490 are currently being proposed for withdrawal or have already been withdrawn. This would leave BS as a stand alone item referring to a range of test methods that no longer exist BS 2782: Methods of testing plastics BS :Method 1112A:1989 Thermoplastics pipes, fittings and valves. Leaktightness of thermoplastics pipes and fittings for non-pressure applications PRI/88 This standard has been declared obsolescent for a further period as it is no longer relevant 20 Prices may be subject to change. Update Standards Jan 2009