British Standards Quick Reference Guide

Transcription

1 British Standards Quick Reference Guide The following British Standards are listed or referred to in this issue of Update Standards with the exception of those in New Work Started. Building and civil engineering BS BS BS , 19 BS BS , 24 BS BS BS EN , 19 BS EN BS EN BS EN BS EN BS EN ISO BS EN ISO BS EN ISO , 24 BS EN ISO BS EN ISO BS EN BS EN , 24 BS EN BS EN BS EN DD ENV NA to BS EN NA to BS EN PD CEN/TR PD Consumer products and services BS , 27, 28 BS BS , 23 BS DD CEN/TS DD CEN ISO/TS BS EN ISO BS EN BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN ISO BS EN ISO BS EN ISO BS EN BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO PD ISO/TR PD ISO/TR Electrotechnical BS BS BS BS BS BS BS BS , 22, 23 BS BS BS BS BS BS BS BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN , 24 BS EN BS EN , 24 BS EN BS EN , 15 BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS ISO BS CECC BS CECC DD IEC/PAS DD IEC/PAS DD IEC/PAS DD IEC/TS DD IEC/TS DD IEC/TS PD ES , 23 PD , 24 PD CLC/TR PD IEC/TR , 24 PD IEC/TR BS E BS E Engineering BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS , 23 DD CEN/TS BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN ISO BS EN ISO BS EN ISO BS EN BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN BS EN ISO BS EN BS EN BS EN , 23 BS EN , 23 BS EN BS EN BS EN ISO BS EN ISO BS EN BS EN ISO BS EN , 23 BS EN ISO BS EN BS EN BS EN BS EN BS EN ISO BS EN BS EN BS EN BS EN BS EN BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN BS EN , 23 BS EN BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO , 17 BS ISO BS ISO BS ISO Prices may be subject to change. Update Standards Mar 2009

2 British Standards Quick Reference Guide continued... BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO DD ISO/PAS DD ISO/TS PD ISO/TR PD ISO/TR BS 3M BS AU BS AU BS AU Health and environment BS , 26, 27, 28 BS EN BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN BS EN BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN BS ISO BS ISO BS ISO Information systems BS EN BS EN , 16, 24 BS ISO/IEC DD ISO/TS PD ISO/IEC TR Management systems BS BIP BS EN BS EN BS EN BS EN BS EN BS ISO , 24 BS ISO BS ISO , 24 PD Materials and chemicals BS , 23 BS , 25 BS BS , 21 BS BS , 21 BS , 23 BS BS BS DD CEN/TS DD CEN/TS DD CEN ISO/TS DD CEN ISO/TS DD CEN ISO/TS BS EN ISO , 25, 26 BS EN ISO BS EN ISO BS EN ISO BS EN BS EN ISO BS EN BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO , 27 BS EN ISO BS EN ISO , 24 BS EN BS EN ISO BS EN ISO BS EN BS EN BS EN BS EN BS EN BS EN ISO BS EN ISO BS EN BS EN BS EN BS EN BS EN ISO BS EN BS EN ISO BS EN BS ISO BS ISO , 29 BS ISO BS ISO , 23 BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO PD CEN/TR Update Standards Mar 2009 Prices may be subject to change. 5

3 Alpha-numeric Sequence of British Standards Alpha-numeric sequence of British Standards quoted in this issue BS BS , 27, 28 BS BS , 23 BS BS BS BS BS BS BS BS BS BS , 25 BS BS BS , 21 BS BS BS BS BS , 21 BS , 23 BS BS BS BS BS BS BS , 19 BS BS BS , 26, 27, 28 BS BS , 23 BS BS , 24 BS BS BS BS , 23 BS BS BS BS BS , 22, 23 BS BS BS BS BS BS BS BIP BIP DD CEN/TS DD CEN/TS DD CEN/TS DD CEN/TS DD CEN ISO/TS DD CEN ISO/TS DD CEN ISO/TS DD CEN ISO/TS BS EN ISO , 25, 26 BS EN BS EN BS EN , 19 BS EN ISO BS EN BS EN ISO BS EN BS EN BS EN BS EN BS EN ISO BS EN ISO BS EN BS EN BS EN BS EN BS EN ISO BS EN BS EN ISO BS EN ISO BS EN BS EN ISO BS EN ISO BS EN ISO BS EN BS EN ISO BS EN BS EN BS EN ISO BS EN BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO , 24 BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO , 27 BS EN ISO BS EN ISO BS EN ISO BS EN BS EN ISO BS EN ISO , 24 BS EN BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN BS EN ISO BS EN ISO BS EN BS EN ISO BS EN BS EN BS EN BS EN , 23 BS EN , 23 BS EN BS EN BS EN , 24 BS EN BS EN ISO BS EN ISO BS EN BS EN BS EN BS EN ISO BS EN BS EN BS EN ISO BS EN , 23 BS EN ISO BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN ISO BS EN ISO BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN ISO BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN ISO BS EN BS EN BS EN BS EN ISO BS EN ISO BS EN BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN BS EN ISO BS EN ISO BS EN ISO BS EN Prices may be subject to change. Update Standards Mar 2009

4 Alpha-numeric Sequence of British Standards continued... BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN , 23 BS EN BS EN BS EN , 24 BS EN BS EN , 24 BS EN BS EN BS EN , 15 BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN , 16, 24 BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN DD ENV BS ISO , 24 BS ISO BS ISO , 29 BS ISO BS ISO BS ISO BS ISO , 23 BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO , 17 BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO/IEC BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO , 24 BS CECC BS CECC DD ISO/PAS DD ISO/TS DD ISO/TS DD IEC/PAS DD IEC/PAS DD IEC/PAS DD IEC/TS DD IEC/TS DD IEC/TS NA to BS EN NA to BS EN PD ES , 23 PD CEN/TR PD CEN/TR PD PD PD , 24 PD ISO/TR PD ISO/TR PD ISO/TR PD ISO/IEC TR PD ISO/TR PD CLC/TR PD IEC/TR , 24 PD IEC/TR BS 3M BS E BS E BS AU BS AU BS AU PAS PAS Please do not send confirmation of orders placed by telephone as it can lead to duplication 8 Prices may be subject to change. Update Standards Mar 2009

5 British Standards BRITISH STANDARDS The following British Standard publications are available from BSI Customer Services (see How to order on page 2). The publications listed below are new and revised British Standards that were made available last month. An existing BSI publication bearing a number identical to one announced below is automatically withdrawn unless stated otherwise. In all other cases of supersession, details are given and a corresponding entry appears in the British Standards withdrawn section. BRITISH STANDARD IMPLEMENTATIONS WILL BE SUPPLIED IN PREFERENCE TO EUROPEAN OR INTERNATIONAL STANDARDS, UNLESS OTHERWISE REQUESTED. Please order by the British Standard reference not the ISBN number. BS 2000 series standards are also available from: Library of the Energy Institute 61 New Cavendish Street London W1G 7AR Tel: Fax: lis@energyinst.org.uk For this series, member pricing is applicable to BSI and Energy Institute members. BS 6222: Domestic kitchen equipment BS :2009 Fitted kitchen units, peninsular units, island units and breakfast bars. Performance requirements and test methods supersedes BS :1997 and BS :1995 ISBN FW/0/2 BS 6798:2009 Specification for installation and maintenance of gas-fired boilers of rated input not exceeding 70 kw net supersedes BS 6798:2000 ISBN members, non-members GSE/30 BS 8515:2009 Rainwater harvesting systems. Code of practice ISBN members, non-members CB/506 NA to BS EN 1993: UK National Annex (informative) to Eurocode 3. Design of steel structures NA to BS EN :2005 Material toughness and through thickness properties ISBN members, non-members B/525/31 NA to BS EN 1999: UK National Annex to Eurocode 9 NA to BS EN : Design of aluminium structures NA to BS EN :2007 Structural fire design ISBN members, non-members B/525/9 NA to BS EN :2007 Cold-formed structural sheeting ISBN members, non-members B/525/9 NA to BS EN :2007 Shell structures ISBN members, non-members B/525/9 BS EN PUBLICATIONS The following are British Standard implementations of the English language versions of European Standards (ENs). BSI has an obligation to publish all ENs and to withdraw any conflicting British Standards. This has led to a series of standards, BS ENs, using the EN number. Note: The date referenced in the identifier is the date of the European standard. BS EN 115: Safety of escalators and moving walks BS EN 115-1:2008 Construction and installation supersedes BS EN 115:1995 ISBN members, non-members MHE/4 BS EN 200:2008 Sanitary tapware. Single taps and combination taps for water supply systems of type 1 and type 2. General technical specification supersedes BS EN 200:1992 which is withdrawn and BS 5412:1996 which is declared obsolescent ISBN members, non-members B/504/8 BS EN 1409:2008 Chemicals used for water treatment intended for human consumption. Polyamines supersedes BS EN 1409:1998 ISBN CII/59 BS EN 1646: Leisure accommodation vehicles. Motor caravans BS EN :2008 User payload supersedes BS EN :1999 ISBN members, non-members B/511 BS EN ISO 1736:2008 Dried milk and dried milk products. Determination of fat content. Gravimetric method (Reference method) supersedes BS EN ISO 1736:2000 ISBN AW/5 BS EN ISO 1737:2008 Evaporated milk and sweetened condensed milk. Determination of fat content. Gravimetric method (Reference method) supersedes BS EN ISO 1737:2000 ISBN AW/5 BS EN ISO 1854:2008 Whey cheese. Determination of fat content. Gravimetric method (Reference method) supersedes BS EN ISO 1854:2000 ISBN AW/5 BS EN 1914:2009 Inland navigation vessels. Work boats, ship s boats and lifeboats supersedes BS EN 1914:1997 ISBN SME/32/-/7 10 Prices may be subject to change. Update Standards Mar 2009

6 BS EN ISO 2439:2008 Flexible cellular polymeric materials. Determination of hardness (indentation technique) supersedes BS EN ISO 2439:2001 ISBN PRI/24 BS EN ISO 2450:2008 Cream. Determination of fat content. Gravimetric method (Reference method) supersedes BS EN ISO 2450:1999 ISBN AW/5 BS EN ISO 3449:2008 Earth-moving machinery. Falling-object protective structures. Laboratory tests and performance requirements supersedes BS EN ISO 3449:2005 ISBN B/513/1 BS EN ISO 3457:2008 Earth-moving machinery. Guards. Definitions and requirements supersedes BS EN ISO 3457:2003 ISBN B/513/1 BS EN ISO 3471:2008 Earth-moving machinery. Roll-over protective structures. Laboratory tests and performance requirements supersedes the dual numbered standard BS EN 13510:2000, BS :2000 ISBN members, non-members B/513/1 BS EN ISO 6683:2008 Earth-moving machinery. Seat belts and seat belt anchorages. Performance requirements and tests supersedes BS EN ISO 6683:2005 ISBN members, non-members B/513/1 BS EN ISO 7096:2008 Earth-moving machinery. Laboratory evaluation of operator seat vibration supersedes the dual numbered standard BS EN ISO 7096:2000, BS :2000 ISBN B/513/1 BS EN ISO 7208:2008 Skimmed milk, whey and buttermilk. Determination of fat content. Gravimetric method (Reference method) supersedes BS EN ISO 7208:2000 ISBN AW/5 BS EN ISO 7328:2008 Milk-based edible ices and ice mixes. Determination of fat content. Gravimetric method (Reference method) supersedes the dual numbered standard BS EN ISO 7328:2000, BS :2000 ISBN AW/5 BS EN ISO 7405:2008 Dentistry. Evaluation of biocompatibility of medical devices used in dentistry supersedes BS EN ISO 7405:1997 ISBN members, non-members CH/106 BS EN ISO 8381:2008 Milk-based infant foods. Determination of fat content. Gravimetric method (Reference method) supersedes the dual numbered standard BS EN ISO 8381:2000, BS :2000 ISBN AW/5 BS EN 9101:2008 Aerospace series. Quality management systems. Assessment (based on ISO 9001:2000) ISBN members, non-members ACE/1 BS EN ISO 10058: Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) BS EN ISO :2008 Apparatus, reagents, dissolution and determination of gravimetric silica supersedes BS EN ISO 10058:1996 ISBN RPI/1 BS EN ISO :2008 Wet chemical analysis supersedes BS EN ISO 10058:1996 ISBN RPI/1 BS EN ISO :2008 Flame atomic absorption spectrophotometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) supersedes BS EN ISO 10058:1996 ISBN RPI/1 BS EN ISO 10407: Petroleum and natural gas industries. Rotary drilling equipment BS EN ISO :2008 Inspection and classification of used drill stem elements ISBN members, non-members PSE/17/-/4 BS EN ISO 10846: Acoustics and vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements BS EN ISO :2008 Principles and guidelines supersedes BS EN ISO :1999 ISBN members, non-members EH/1/4 BS EN ISO 11961:2008 Petroleum and natural gas industries. Steel drill pipe supersedes BS EN ISO 11961:1997 ISBN members, non-members PSE/17/-/5 BS EN 12175:2006 Chemicals used for treatment of water intended for human consumption. Hexafluorosilicic acid supersedes BS EN 12175:2001 ISBN CII/59 BS EN 13083:2008 Tanks for transport of dangerous goods. Service equipment for tanks. Adaptor for bottom loading and unloading supersedes BS EN 13083:2001 ISBN AUE/18 BS EN 13696:2008 Wood flooring. Test methods to determine elasticity and resistance to wear and impact resistance supersedes DD ENV 13696:2001 ISBN B/543 your order order@bsigroup.com Update Standards Mar 2009 Prices may be subject to change. 11

7 BS EN Publications continued... BS EN ISO 13732: Ergonomics of the thermal environment. Methods for the assessment of human responses to contact with surfaces BS EN ISO :2008 Hot surfaces supersedes BS EN ISO :2006 ISBN members, non-members PH/9/1 BS EN ISO 14172:2008 Welding consumables. Covered electrodes for manual metal arc welding of nickel and nickel alloys. Classification supersedes BS EN ISO 14172:2003 ISBN WEE/39 BS EN 14890: Application interface for smart cards used as secure signature creation devices BS EN :2008 Basic services ISBN members, non-members IST/17 BS EN 15029:2006 Products used for treatment of water intended for human consumption. Iron (III) hydroxide oxide ISBN CII/59 BS EN 15268:2008 Petrol filling stations. Safety requirements for the construction of submersible pump assemblies ISBN members, non-members PVE/21 BS EN 15288: Swimming pools BS EN :2008 Safety requirements for design ISBN SW/136 BS EN :2008 Safety requirements for operation ISBN members, non-members SW/136 BS EN 15316: Heating systems in buildings. Method for calculation of system energy requirements and system efficiencies BS EN :2008 Space heating generation systems, biomass combustion systems ISBN members, non-members RHE/24 BS EN 15436: Road service area maintenance equipment BS EN 15620:2008 Steel static storage systems. Adjustable pallet racking. Tolerances, deformations and clearances ISBN members, non-members MHE/8 BS EN 15629:2008 Steel static storage systems. Specification of storage equipment ISBN members, non-members MHE/8 BS EN 15633: Foodstuffs. Detection of food allergens by immunological methods BS EN :2009 General considerations ISBN AW/-/3 BS EN 15634: Foodstuffs. Detection of food allergens by molecular biological methods BS EN :2009 General considerations ISBN AW/-/3 BS EN 15031:2006 Chemicals used for treatment of swimming pool water. Aluminium based coagulants ISBN CII/59 BS EN 15166:2008 Food processing machinery. Automatic back splitting machines of butchery carcasses. Safety and hygiene requirements ISBN members, non-members MCE/3/5 BS EN 15194:2009 Cycles. Electrically power assisted cycles. EPAC bicycles ISBN members, non-members GME/25 BS EN :2008 Performance assessment ISBN members, non-members B/513 BS EN 15507:2008 Packaging. Transport packaging for dangerous goods. Comparative material testing of polyethylene grades ISBN PKW/0 BS EN 15608:2008 Surface active agents. Quantitative determination of free fatty acid in alkylamidopropylbetaines. Gas-chromatographic method ISBN members, non-members CII/34 BS EN 15635:2008 Steel static storage systems. Application and maintenance of storage equipment ISBN members, non-members MHE/8 BS EN 15644:2008 Traditionally designed prefabricated stairs made of solid wood. Specifications and requirements ISBN members, non-members B/543 BS EN 15655:2009 Ductile iron pipes, fittings and accessories. Internal polyurethane lining for pipes and fittings. Requirements and test methods ISBN PSE/10 12 Prices may be subject to change. Update Standards Mar 2009

8 BS EN Publications continued... BS EN 15696:2008 Self storage. Specification for self storage services ISBN SVS/7/3 BS EN 15702:2008 Cellular plastics. Cell count procedure for flexible and rigid polyurethane supersedes BS :1988 ISBN members, non-members PRI/24 BS EN 15704:2008 Liming materials. Determination of the breakdown of granulated calcium and calcium/magnesium carbonates under the influence of water ISBN members, non-members CII/37 BS EN 15800:2008 Cylindrical helical springs made of round wire. Quality specifications for cold coiled compression springs ISBN GME/15 BS EN ISO 15882:2008 Sterilization of health care products. Chemical indicators. Guidance for selection, use and interpretation of results supersedes BS EN ISO 15882:2003 ISBN members, non-members LBI/35 BS EN 50085: Cable trunking systems and cable ducting systems for electrical installations BS EN :2008 Particular requirements for cable trunking systems and cable ducting systems intended for mounting underfloor, flushfloor, or onfloor ISBN members, non-members PEL/213 BS EN 50106:2008 Safety of household and similar electrical appliances. Particular rules for routine tests referring to appliances under the scope of EN supersedes BS EN 50106:1997 which remains current ISBN CPL/61 BS EN 50136: Alarm systems. Alarm transmission systems and equipment BS EN :2008 Requirements for packet switched network PSN ISBN members, non-members GW/1/5 BS EN 50216: Power transformer and reactor fittings BS EN :2008 Oil and winding temperature indicators ISBN members, non-members PEL/14 BS EN 50408:2008 Household and similar electrical appliances. Safety. Particular requirements for cab heaters for vehicles ISBN members, non-members CPL/61/07 BS EN 50492:2008 Basic standard for the in-situ measurement of electromagnetic field strength related to human exposure in the vicinity of base stations ISBN members, non-members GEL/106 BS EN 50504:2008 Validation of arc welding equipment supersedes BS 7570:2000 ISBN WEE/6 BS EN 50521:2008 Connectors for photovoltaic systems. Safety requirements and tests ISBN members, non-members GEL/82 BS EN 60068: Environmental testing BS EN : Tests BS EN :2008 Test T. Test methods for solderability and resistance to soldering heat of devices with leads supersedes BS T:1981 which remains current ISBN EPL/501 BS EN :2008 Test Ec. Rough handling shocks, primarily for equipment-type specimens supersedes BS EN :1993 and BS EN :1993 ISBN GEL/104 BS EN 60079: Explosive atmospheres BS EN :2008 Electrical installations design, selection and erection supersedes BS EN :2003 ISBN members, non-members GEL/31/11 BS EN 60512: Connectors for electronic equipment. Tests and measurements BS EN : Mechanical tests on contacts and terminations BS EN :2008 Test 16c. Contact-bending strength ISBN members, non-members EPL/48 BS EN :2008 Test 16f. Robustness of terminations ISBN members, non-members EPL/48 BS EN :2008 Test 16g. Measurement of contact deformation after crimping ISBN members, non-members EPL/48 BS EN :2008 Test 16n. Bending strength, fixed male tabs ISBN members, non-members EPL/48 BS EN :2008 Test 16p. Torsional strength, fixed male tabs ISBN members, non-members EPL/48 14 Prices may be subject to change. Update Standards Mar 2009

9 BS EN :2008 Test 16q. Tensile and compressive strength, fixed male tabs ISBN members, non-members EPL/48 BS EN 60519: Safety in electroheat installations BS EN :2009 Particular requirements for installations with electron guns ISBN PEL/27 BS EN 60598: Luminaires BS EN 60851: Winding wires. Test methods BS EN :2008 Electrical properties supersedes BS EN :1998 ISBN GEL/55 BS EN 60904: Photovoltaic devices BS EN :2008 Measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral irradiance data supersedes BS EN :1993 ISBN members, non-members GEL/82 BS EN :2008 Type 4 elements supersedes BS EN :2004 which remains current ISBN AMT/7 BS EN :2008 Type 7 elements supersedes BS EN :2004 which remains current ISBN members, non-members AMT/7 BS EN :2008 Type 8 elements supersedes BS EN :2004 which remains current ISBN members, non-members AMT/7 BS EN :2008 General requirements and tests supersedes BS EN :2004 which remains current ISBN members, non-members CPL/34/4 BS EN 60793: Optical fibres BS EN :2008 Product specifications. Sectional specification for class B single-mode fibres supersedes BS EN :2004 ISBN members, non-members GEL/86/1 BS EN 60794: Optical fibre cables BS EN :2008 Indoor cables. Product specification for simplex and duplex buffered A4 fibres ISBN GEL/86/1 BS EN 61158: Industrial communication networks. Fieldbus specifications BS EN :2008 Physical layer specification and service definition ISBN members, non-members AMT/7 BS EN : Data-link layer service definition BS EN :2008 Type 1 elements supersedes BS EN :2004 which remains current ISBN members, non-members AMT/7 BS EN :2008 Type 2 elements supersedes BS EN :2004 which remains current ISBN members, non-members AMT/7 BS EN :2008 Type 11 elements supersedes BS EN :2004 which remains current ISBN members, non-members AMT/7 BS EN :2008 Type 13 elements supersedes BS EN :2004 which remains current ISBN members, non-members AMT/7 BS EN :2008 Type 14 elements supersedes BS EN :2004 which remains current ISBN AMT/7 BS EN :2008 Type 16 elements supersedes BS EN :2004 which remains current ISBN AMT/7 BS EN :2008 Outdoor cables. Family specification for optical telecommunication cables for lakes, river crossings and coastal application supersedes BS EN :2003 ISBN GEL/86/1 BS EN :2008 Type 3 elements supersedes BS EN :2004 which remains current ISBN members, non-members AMT/7 BS EN :2008 Type 17 elements supersedes BS EN :2004 which remains current ISBN members, non-members AMT/7 Update Standards Mar 2009 Prices may be subject to change. 15

10 BS EN Publications continued... BS EN :2008 Type 19 elements supersedes BS EN :2004 which remains current ISBN AMT/7 BS EN : Application layer service definition BS EN :2008 Type 11 elements supersedes BS EN :2004 ISBN members, non-members AMT/7 BS EN :2008 Type 12 elements supersedes BS EN :2004 ISBN members, non-members AMT/7 BS EN :2008 Type 13 elements supersedes BS EN :2004 ISBN members, non-members AMT/7 BS EN :2008 Type 14 elements supersedes BS EN :2004 ISBN members, non-members AMT/7 BS EN :2008 Type 15 elements supersedes BS EN :2004 ISBN members, non-members AMT/7 BS EN :2008 Type 16 elements supersedes BS EN :2004 ISBN members, non-members AMT/7 BS EN :2008 Type 17 elements supersedes BS EN :2004 ISBN members, non-members AMT/7 BS EN :2008 Type 18 elements supersedes BS EN :2004 ISBN members, non-members AMT/7 BS EN :2008 Type 19 elements supersedes BS EN :2004 ISBN members, non-members AMT/7 BS EN :2008 Type 20 elements supersedes BS EN :2004 ISBN members, non-members AMT/7 BS EN 61162: Maritime navigation and radiocommunication equipment and systems. Digital interfaces BS EN :2008 Serial data instrument network ISBN EPL/80 BS EN 61400: Wind turbines BS EN :2008 Measurement and assessment of power quality characteristics of grid connected wind turbines supersedes BS EN :2002 ISBN members, non-members PEL/88 BS EN 62227:2008 Multimedia home server systems. Digital rights permission code ISBN members, non-members EPL/100 BS EN 62288:2008 Maritime navigation and radiocommunication equipment and systems. Presentation of navigation-related information on shipborne navigational displays. General requirements, methods of testing and required test results ISBN members, non-members EPL/80 BS EN 62428:2008 Electric power engineering. Modal components in three-phase A.C. systems. Quantities and transformations ISBN SS/7 BS EN 62491:2008 Industrial systems, installations and equipment and industrial products. Labelling of cables and cores ISBN members, non-members GEL/3 BS EN 80000: Quantities and units BS EN :2008 Information science and technology partially supersedes BS EN :2007 ISBN SS/7 BS IMPLEMENTATIONS BS Implementations comprise the ISO or IEC text without any national deviation and with front and back cover indicating the UK committee responsible. No other information will normally be added. Note: The date referenced in the identifier is the date of the international standard. BS ISO 815: Rubber, vulcanized or thermoplastic. Determination of compression set BS ISO 815-1:2008 At ambient and elevated temperatures supersedes BS 903-A6:1992 ISBN PRI/22 BS ISO 3290: Rolling bearings. Balls BS ISO :2008 Steel balls supersedes BS ISO 3290:2001 ISBN MCE/7 16 Prices may be subject to change. Update Standards Mar 2009

11 BS ISO :2008 Ceramic balls ISBN MCE/7 BS ISO 4195:2007 Conveyor belts with heat-resistant rubber covers. Heat resistance of covers. Requirements and test methods ISBN members, non-members PRI/67 BS ISO 5832: Implants for surgery. Metallic materials BS ISO :2007 Wrought titanium 15-molybdenum 5-zirconium 3-aluminium alloy ISBN members, non-members CH/150/1 BS ISO 12003: Agricultural and forestry tractors. Roll-over protective structures on narrow-track wheeled tractors BS ISO :2008 Rear-mounted ROPS supersedes BS ISO :2002 ISBN members, non-members AGE/6 BS ISO 15971:2008 Natural gas. Measurement of properties. Calorific value and Wobbe index ISBN members, non-members PTI/15 BS ISO 17334:2008 Metallic and other inorganic coatings. Autocatalytic nickel over autocatalytic copper for electromagnetic shielding ISBN STI/33 BS ISO/IEC 19757: Information technology. Document schema definition languages (DSDL) BS ISO/IEC :2008 Document semantics renaming language (DSRL) ISBN IST/41 BS ISO 20665:2008 Water quality. Determination of chronic toxicity to Ceriodaphnia dubia ISBN EH/3/5 BS ISO 21011:2008 Cryogenic vessels. Valves for cryogenic service ISBN PVE/18 BS ISO 23317:2007 Implants for surgery. In vitro evaluation for apatite-forming ability of implant materials ISBN CH/150/1 BS ISO 26945:2008 Metallic and other inorganic coatings. Electrodeposited coatings of tin-cobalt alloy ISBN STI/33 BS ISO 80000: Quantities and units BS ISO :2008 Light supersedes BS ISO 31-6:1992 ISBN members, non-members SS/7 PUBLISHED DOCUMENTS PD ISO/TR 1281: Rolling bearings. Explanatory notes on ISO 281 PD ISO/TR :2008 Basic dynamic load rating and basic rating life ISBN members, non-members MCE/7 PD ISO/TR :2008 Modified rating life calculation, based on a systems approach to fatigue stresses ISBN members, non-members MCE/7 PD :2009 Recommendations for the design of structures to BS EN ISBN B/525/31 PD CEN/TR 15367: Petroleum products. Guide for good housekeeping PD CEN/TR :2007 Automotive diesel fuels ISBN PTI/2 PD ISO/IEC TR 15504: Information technology. Process assessment PD ISO/IEC TR :2008 An exemplar system life cycle process assessment model ISBN members, non-members IST/15 PD CEN/TR 15615:2008 Explanation of the general relationship between various CEN standards and the Energy Performance of Buildings Directive (EPBD). Umbrella document ISBN members, non-members B/540 PD CLC/TR 50378: Passive components to be used in optical fibre communication systems. Product specifications PD CLC/TR :2009 SC(SC2)-PC connector-type fixed optical attenuators using IEC Category B1.1 singlemode fibre ISBN GEL/86/2 PD IEC/TR 60909: Short-circuit currents in three-phase A.C. systems PD IEC/TR :2008 Data of electrical equipment for short-circuit current calculations supersedes PD :1994 ISBN members, non-members PEL/73 Update Standards Mar 2009 Prices may be subject to change. 17

12 Published Documents continued... PD IEC/TR 62572: Fibre optic active components and devices. Reliability standards PD IEC/TR :2008 Laser module degradation ISBN GEL/86/3 DRAFTS FOR DEVELOPMENT DD ISO/TS 13399: Cutting tool data representation and exchange DD ISO/TS :2008 Definitions, principles and methods for reference dictionaries supersedes DD ISO/TS :2004 ISBN members, non-members MTE/18 DD CEN ISO/TS 15530: Geometrical product specifications (GPS). Coordinate measuring machines (CMM). Technique for determining the uncertainty of measurement DD CEN ISO/TS :2007 Use of calibrated workpieces or standards ISBN members, non-members TDW/4 DD CEN/TS 15750:2006 Fertilizers. Determination of different forms of nitrogen in fertilizers containing nitrogen only as nitric, ammoniacal and urea nitrogen by two different methods ISBN members, non-members CII/37 DD CEN/TS 15790:2008 Animal feeding stuffs. PCR typing of probiotic strains of Saccharomyces cerevisiae (yeast) ISBN members, non-members AW/10 DD ISO/TS 25237:2008 Health informatics. Pseudonymization ISBN members, non-members IST/35 DD IEC/TS 61850: Communication networks and systems for power utility automation DD IEC/TS :2009 Guideline to exchanging information from a CDC-based data model using IEC or IEC ISBN members, non-members PEL/57 DD IEC/PAS 62137: Electronics assembly technology DD IEC/PAS :2009 Selection guidance of environmental and endurance test methods for solder joints ISBN EPL/501 DD IEC/TS 62492: Industrial process control devices. Radiation thermometers DD IEC/TS :2008 Technical data for radiation thermometers ISBN members, non-members GEL/65/2 DD IEC/TS 62538:2009 Categorization of optical devices ISBN members, non-members GEL/86 DD IEC/PAS 62562:2008 Cavity resonator method to measure the complex permittivity of low-loss dielectric plates ISBN members, non-members EPL/46/2 DD IEC/PAS 62587:2008 Method for measuring performance of portable household electric room air cleaners ISBN CPL/59 PUBLICLY AVAILABLE SPECIFICATIONS Publicly Available Specifications (formerly Product Assessment Specifications) are issued to provide an interim document where there is a market need but where a full British or European Standard has yet to be published. PAS 197:2009 Code of practice for cultural collections management ISBN members, non-members PAS 2020:2009 Direct marketing. Environmental performance. Specification ISBN members, non-members SPECIALIST BOOKS FROM BSI BIP 3083:2009 (CD-ROM) Graphical symbols for use in the labelling of medical devices supersedes BIP 3083:2008 ISBN members, non-members VAT is applicable to this item. AMENDMENTS TO BRITISH STANDARDS Most amendments are not issued separately. Those that make significant changes to a standard are incorporated into the standard which is re-issued as a new edition (see Updated British Standards ). Amendments which make smaller changes or corrections are available on request, free of charge to past purchasers of the standard. All amendments to date of despatch are included within any main publication when ordered for the first time. The following amendments to British Standards were made available last month. BS 5628: Code of practice for the use of masonry BS :2005 Structural use of unreinforced masonry CORRIGENDUM 1 B/525/6 18 Prices may be subject to change. Update Standards Mar 2009

13 BS :2005 Structural use of reinforced and prestressed masonry CORRIGENDUM 1 B/525/6 BS :2005 Materials and components, design and workmanship CORRIGENDUM 1 B/525/6 BS 5975:2008 Code of practice for temporary works procedures and the permissible stress design of falsework CORRIGENDUM 1 B/514/26 BS EN 200:2008 Sanitary tapware. Single taps and combination taps for water supply systems of type 1 and type 2. General technical specification CORRIGENDUM 1 B/504/8 BS EN 817:2008 Sanitary tapware. Mechanical mixing valves (PN 10). General technical specifications CORRIGENDUM 1 B/504/8 BS EN 1088:1995+A2:2008 Safety of machinery. Interlocking devices associated with guards. Principles for design and selection CORRIGENDUM 1 MCE/3 Also incorporates Amendments 1 & 2. BS EN 1886:2007 Ventilation for buildings. Air handling units. Mechanical performance CORRIGENDUM 1 RHE/2 BS EN 12077: Cranes safety. Requirements for health and safety BS EN :1998+A1:2008 Limiting and indicating devices CORRIGENDUM 1 MHE/3/11 Also incorporates Amendment 1. BS EN 12273:2008 Slurry surfacing. Requirements CORRIGENDUM 1 B/510/2 BS EN 12828:2003 Heating systems in buildings. Design for waterbased heating systems CORRIGENDUM 1 RHE/24 BS EN 12831:2003 Heating systems in buildings. Method for calculation of the design heat load CORRIGENDUM 1 RHE/24 DD CEN/TS 13388:2008 Copper and copper alloys. Compendium of compositions and products CORRIGENDUM 1 NFE/34 BS EN 14336:2004 Heating systems in buildings. Installation and commissioning of water based heating systems CORRIGENDUM 1 RHE/24 BS EN 14375:2003 Child-resistant non-reclosable packaging for pharmaceutical products. Requirements and testing CORRIGENDUM 2 PKW/0/3 Also incorporates Corrigendum 1. BS EN 15707:2008 Print media surveys. Vocabulary and service requirements CORRIGENDUM 1 SVS/3 UPDATED BRITISH STANDARDS The following standards have been amended and the amendments have been incorporated into an updated standard. NOTE: Updated British Standards must be reordered as the amendments are not available separately. BS 746:2005+A1:2009 Specification for gas meter unions and adaptors AMENDMENT 1 GSE/25 BS 8848:2007+A1:2009 Specification for the provision of visits, fieldwork, expeditions, and adventurous activities, outside the United Kingdom AMENDMENT members, non-members SVS/2/5 your order order@bsigroup.com BS EN ISO 105: Textiles. Tests for colour fastness BS EN ISO 105-C08:2002+A1:2008 Colour fastness to domestic and commercial laundering using a non-phosphate reference detergent incorporating a low temperature bleach activator AMENDMENT 1 TCI/81 BS EN 999:1998+A1:2008 Safety of machinery. The positioning of protective equipment in respect of approach speeds of parts of the human body AMENDMENT 1 MCE/3 Also incorporates Corrigendum 1. BS EN 1093: Safety of machinery. Evaluation of the emission of airborne hazardous substances BS EN :2006+A1:2008 Tracer gas method for the measurement of the emission rate of a given pollutant AMENDMENT 1 MCE/3 BS EN :1998+A1:2008 Separation efficiency by mass, ducted outlet AMENDMENT members, non-members MCE/3 BS EN :1998+A1:2008 Pollutant concentration parameter, room method AMENDMENT members, non-members MCE/3 BS EN :2001+A1:2008 Decontamination index AMENDMENT 1 MCE/3 BS EN 1526:1997+A1:2008 Safety of industrial trucks. Additional requirements for automated functions on trucks AMENDMENT 1 MHE/7 BS EN 1550:1997+A1:2008 Machine-tools safety. Safety requirements for the design and construction of work holding chucks AMENDMENT 1 MTE/1 Update Standards Mar 2009 Prices may be subject to change. 19

14 Updated British Standards continued... BS EN 1612: Plastics and rubber machines. Reaction moulding machines BS EN :2000+A1:2008 Safety requirements for reaction moulding plant AMENDMENT 1 MCE/3/2 BS EN 1857:2003+A1:2008 Chimneys. Components. Concrete flue liners AMENDMENT members, non-members B/506 Also incorporates Corrigendum 1. BS EN 1995: Eurocode 5. Design of timber structures BS EN :2004+A1:2008 General. Common rules and rules for buildings AMENDMENT members, non-members B/525/5 Also incorporates Corrigendum 1. BS EN 60335: Household and similar electric appliances. Safety BS EN :2003+A1:2008 Particular requirements for amusement machines and personal service machines AMENDMENT 1 CPL/61/01 BS EN 60404: Magnetic materials BS EN :1998+A1:2008 Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of an Epstein frame AMENDMENT 1 ISE/NFE/5 BS EN 61675: Radionuclide imaging devices. Characteristics and test conditions BS EN :1998+A1:2008 Positron emission tomographs AMENDMENT members, non-members CH/62/3 BS ISO 4309:2004+A1:2008 Cranes. Wire ropes. Care, maintenance, installation, examination and discard AMENDMENT members, non-members MHE/3/1 BS ISO 6487:2002+A1:2008 Road vehicles. Measurement techniques in impact tests. Instrumentation AMENDMENT 1 AUE/7 SPECIAL ANNOUNCEMENTS Comments can be sent by or by post to named contacts at: BSI Head Office 389 Chiswick High Road London W4 4AL Tel: BS 3505:1986 Specification for unplasticized polyvinyl chloride (PVC-U) pressure pipes for cold potable water This standard was withdrawn in error and has now been reinstated as current and obsolescent. Contact: Committee Service Centre csc@bsigroup.com PRI/88 BS 4346: Joints and fittings for use with unplasticized PVC pressure pipes BS :1969 Injection moulded unplasticized PVC fittings for solvent welding for use with pressure pipes, including potable water supply This standard was withdrawn in error and has now been reinstated as current and obsolescent. Contact: Committee Service Centre csc@bsigroup.com PRI/88 BS EN 62305: Protection against lightning BS EN :2006/Amendment 1 Physical damage to structures and life hazard This amendment to the standard, which will be available shortly, implements verbatim EN :2006/A11:2009 which implements European requirements for Normative References, Terms and Definitions, Lightning Protection Systems and Dimensions. Contact: Keith Stiles keith.stiles@bsigroup.com GEL/81 BS ISO 8528: Reciprocating internal combustion engine driven alternating current generating sets BS ISO :2005 Generating sets Following the recent systematic review of this standard, the secretary of ISO/TC 70 has announced that the decision of the committee is to revise this standard. When work on this begins, an announcement will appear in the New work started section of this magazine. Contact: Committee Service Centre csc@bsigroup.com MCE/14/-/8 BRITISH STANDARDS REVIEWED AND CONFIRMED It is BSI policy for every standard to be reviewed by the technical committee responsible not more than five years after publication, to establish whether it is still current and, if it is not, to identify and set in hand appropriate action. Confirmation indicates the continuing currency of a standard. Where any standard in this list has been amended since publication, confirmation includes all amendments published to date. Reference to a particular amendment indicates that it is published concurrently with the confirmation. BS 5315:1991 Hose clamps (worm drive type) for general purpose use (metric series) PSE/6 BS 6068: Water quality BS : Physical, chemical and biochemical methods BS :1993 Determination of sodium and potassium: determination of sodium by atomic absorption spectrometry EH/3/2 BS :1993 Determination of sodium and potassium: determination of potassium by atomic absorption spectrometry EH/3/2 BS :1993 Determination of sodium and potassium: determination of sodium and potassium by flame emission spectrometry EH/3/2 BS :1993 Determination of selenium by atomic absorption spectrometry EH/3/2 BS :1998 Microbiological methods. Detection and enumeration of Legionella EH/3/4 BS EN 172:1995 Specification for sunglare filters used in personal eye-protectors for industrial use PH/2/1 20 Prices may be subject to change. Update Standards Mar 2009