Read online: shop.bsigroup.com/usonline1211. November 2012

Transcription

1 Read online: shop.bsigroup.com/usonline1211 November 2012 Contents 4 Quick Reference Guide 12 New and revised British Standards 12 BS EN publications 17 British Standard implementations 19 Published Documents 20 Publicly Available Specifications 20 Corrigenda to British Standards 21 Updated British Standards 22 Special Announcements 22 British Standards proposed for confirmation and confirmed 33 British Standards proposed for withdrawal and withdrawn 45 British Standards under review 45 New work started 51 Draft British Standards 57 Documents not issued as DPCs 57 CEN publications 58 CENELEC publications 59 IEC publications 62 ISO publications * See back cover for more information

2 Welcome to Update Standards In these pages you ll find details of new, revised, draft and withdrawn standards and publications from the last month. Update Standards is designed to help you keep track of the standards you use, and discover new standards that could help your organization. Get free expert help from our Knowledge Centre The Knowledge Centre is a team of information professionals, available 9am-5pm Mon-Fri to help with your standards questions. They can perform advanced subject searches, and quickly identify international equivalents from over 200 standards organizations across 23 countries. They can also send you the scope and contents of standards before your buy, so you can be sure of what you re receiving. Access to the Knowledge Centre is a benefit of being a member of BSI. Contact the Knowledge Centre Phone Fax knowledgecentre@bsigroup.com How to order The standards, publications and conferences featured in this magazine are available online or from our customer services team. Customer services is open from 9am to 5pm, Monday to Friday. Phone Website shop.bsigroup.com/us1211 orders@bsigroup.com to place an order. info@bsigroup.com to make an enquiry Fax Post BSI Customer Services 389 Chiswick High Road London W4 4AL bsigroup.com/customerservicesus1211 BSI Training Our tutors are skilled in transferring knowledge contained within each standard to help you embed excellence within your organization. With over 65,000 clients in 150 countries world-wide, you can trust BSI to help you perform better, reduce risk and grow sustainably. Visit us and download our training catalogue today: bsigroup.co.uk/training

3 BSI Events in 2012 BCM World Conference and Exhibition & 8 November, Olympia, London The BCM World Conference and Exhibition is the premier event in the global industry calendar featuring a vibrant Conference that is explicitly structured to provide value for all levels of business continuity experience and, of course, the bustling Exhibition, with some 50 leading product and service providers supported by an extensive, educational seminar programme across the two days. The demand for BCM has never been greater, whether driven by the need to manage crises more effectively or to provide assurance that your organization is a reliable business partner to key stakeholders. With ever increasing global complexity causing headaches for business leaders and policy makers alike, BCM provides a unique perspective to support better decision making about risk and uncertainty. Join us and fellow practitioners this November to learn and share and to strengthen the voice of BCM. Visit us on stand 3 bcm2012.com 3rd Annual Carbon & Environmental Footprinting Conference 22 November 2012 One Drummond Gate, Victoria, London Join us in London for our 3rd Annual Carbon & Environmental Footprinting Conference and have questions critical to your organisation answered by experts, policy makers and thought leaders from various industry sectors. By attending this unique one-day event you will gain in depth understanding of product footprinting, identify tangible opportunities for business development and cost savings, and get on a path of establishing your leadership position in product Sustainability. Read more and book your place bsigroup.com/conferences Energy Audit series workshop 26 November, One Drummond Gate, Victoria, London BSI are pleased to introduce BS EN Energy audits a standard created to define the attributes of a good quality energy audit that takes a chronological, step-wise approach to guide you through the audit process. An energy audit is an important step for any organization, whatever its size or type, wanting to improve its energy efficiency. This one day workshop offers you a chance to contribute your valuable opinions and network in an open environment. Read more and book your place bsigroup.com/conferences BSI s BIM Conference 6 December 2012, Manchester Join us at the BSI s Building Information Modelling Conference on 6 December 2012 in Manchester and find out how standards could help your organization in the adoption of BIM. This free to attend event will provide you with the opportunity to hear from industry experts about the increasingly important role of BIM in all areas of the construction and civil engineering industry. You will find out more about BSI s initiatives and B/555 Roadmap which documents and describes the activities of the BSI/555 committee in support of delivering clear guidance to the UK industry dedicated to providing and operating built assets. Don t miss the practical workshop on implementing the BS 8541 Library objects for architecture, engineering and construction series. These new standards, and the example templates published for the UK Government BIM implementation strategy are of interest to designers, constructors and product manufacturers. Learn how these standards help the industry share structured data. Read more and book your place bsigroup.com/conferences No longer require a paper copy of Update Standards? Please help us reduce waste by letting us know. Phone membership@bsigroup.com Standards and publications may also be ordered via the BSI shop at shop.bsigroup.com *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call BSI British Standards Institution 2012

4 British Standards Quick Reference Guide The following British Standards are listed or referred to in this issue of Update Standards with the exception of those in New Work Started. Quick reference guide Building and civil engineering BS BS BS BS BS BS , 23 BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS , 35 BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS , 29 BS BS BS BS BS BS BS BS BS BS BS BS BS DD DD DD DD , 38 DD CEN/TS DD CEN/TS DD CEN/TS DD BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN , 14 BS EN ISO DD ENV BS ISO PD CEN/TR PD CEN/TS PD PD ISO/TS Consumer policy PD Consumer products and services BS BS BS BS BS BS BS BS , 27 BS BS BS BS BS BS BS EN BS EN BS EN ISO BS EN BS EN BS EN , 38 BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO PD CEN/TR PD ISO/TS Electrotechnical BS BS BS BS BS BS , 35 BS BS BS , 35 BS BS BS BS BS BS BS BS BS BS BS BS BS BS 9070 N BS 9070 N BS 9073 N BS 9074 N BS 9074 N BS 9075 N BS 9075 N BS 9076 N001 to BS BS BS 9131 N001 to BS 9133 N001 to DD CEN ISO/TS , 39 DD CEN ISO/TS , 39 BS EN BS EN ISO , 39 BS EN ISO , 39 BS EN BS EN BS EN BS EN BS EN , 38 BS EN , 21 BS EN BS EN , 38 BS EN , 38 BS EN , 35 BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN , 38 BS EN , 39 BS EN BS EN , 17 BS EN BS EN , 39 BS EN BS EN BS EN BS EN BS EN BS EN , 35 DD IEC/PAS DD IEC/PAS , 39 PD CEN ISO/TS PD CISPR/TR PD CISPR/TR PD CISPR/TR PD CLC/TR PD IEC/TS PD IEC/TS PD IEC/TS , 39 PD IEC/TS Engineering BS BS BS BS 143 and BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS Update Standards November 2012 Prices may be subject to change.

5 British Standards Quick Reference Guide continued... BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS , 35 BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS EN BS EN BS EN , 38 BS EN , 38 BS EN BS EN BS EN ISO , 38 BS EN BS EN BS EN BS EN ISO BS EN ISO BS EN BS EN BS EN BS EN BS EN BS EN BS EN ISO BS EN BS ISO BS ISO , 35 BS ISO BS ISO , 45 BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO , 39 BS ISO , 39 BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO PD CEN/TR PD PD PD PD ISO/TR BS 2A BS 2A BS 2A BS 2A BS 2A BS A BS A 55 AND BS 2A BS 2A BS 2A BS 2A BS 2A BS A BS 3A BS 4A BS 3A BS 3A BS 4A BS 4A BS 2A BS 3A BS A BS A BS 4A BS 2A BS 2A BS A BS A 242; A 243; A 244; A BS A 246; A 247; A 248; A BS A 250; A 251; A 252; A BS A 281; A 282 [...]...40 BS A 287; A 288 [...]...40 BS 2C BS C BS 2E BS 4F BS 4F BS 3F BS 3F BS 2F BS 2F BS 4F BS 3F BS 4F BS 3F BS 3F BS 5F BS 4F BS 3F BS F BS 3F BS F BS F BS F BS F BS 3G BS G BS G BS G BS G 184 to G BS G BS G BS G BS 4G BS G BS G BS 2G BS G BS G BS 3G BS 4J BS 4J BS 4K BS 5L BS 5L BS 3L BS 3L BS 4L BS 4L BS 3L BS 3L BS 3L BS 2L BS 2L BS 3L BS 2L BS 2L BS 2L BS 2L BS L BS 3L BS 3L BS 2L BS L BS L BS L BS L BS L BS L BS L BS 2L BS 2L BS 2L BS 2L BS 2L BS 2L BS L BS L BS L BS M BS 7S BS 4S BS 5S BS 5S BS 4S BS 3S BS 3S BS 3S BS 2S BS 2S BS 3S BS 2S BS 2S BS 3S BS 2S BS 2S BS 2S BS 2S BS 2S BS 2S BS 2S BS S BS 2S BS S BS S BS S BS 5T BS 4T BS 2T BS T BS T BS T BS T BS T BS T BS T BS 5V BS 2W Update Standards November 2012 Prices may be subject to change. 5

6 British Standards Quick Reference Guide continued... BS 2W BS 2X BS 2X BS HC BS HC BS HC BS HC BS HC BS HC BS HC BS HC BS MA BS MA BS 2SP BS SP BS SP 28 and BS SP 31 and BS SP BS 2SP BS 2SP BS SP BS 2SP BS 2SP BS 2SP BS 2SP BS SP BS 3SP BS 3SP BS 2TA BS 2TA BS 2TA BS 2TA BS 2TA BS 2TA BS 2TA BS 2TA BS TA BS TA BS TA BS TA BS TA BS AU , 45 BS AU Health and environment BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS , 38 BS BS BS BS BS , 29 BS BS BS BS BS , 36 BS DD DD BS EN ISO , 38 BS EN ISO , 38 BS EN ISO BS EN ISO , 38 BS EN ISO BS EN ISO , 38 BS EN BS EN ISO BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN ISO BS EN ISO , 36 BS EN , 39 BS EN BS EN BS ISO BS ISO BS ISO BS ISO PD ISO/TS PD ISO/TS PD ISO/TS Information systems BS BS , 36 BS BS BS BS BS BS BS EN ISO BS EN BS EN ISO , 38 BS EN , 39 BS EN BS EN BS ISO , 38 BS ISO/IEC BS ISO/IEC BS ISO DD IEC/PAS , 39 PD PD PD PD PD PD ISO/TR PD ISO/IEC TS Management systems BS DD DD BS EN ISO/IEC , 38 BS EN BS EN , 38 BS ISO BS ISO PD CEN/TR PD Materials and chemicals BS BS BS , 25 BS BS BS , 20 BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS 381C...23 BS BS BS BS BS BS BS BS BS BS BS BS BS BS , 27 BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS , 35 BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS DD CEN/TS , 38 BS EN BS EN ISO , 38 BS EN ISO BS EN BS EN BS EN BS EN BS EN , 38 BS EN ISO , 20 BS ISO BS ISO BS ISO , 35 BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO Update Standards November 2012 Prices may be subject to change.

7 British Standards Online A faster, easier way to work with standards BSOL is the online standards database that makes using standards easier and more cost effective. With it, you can access over 55,000 British, adopted European and International Standards from your desktop. It s available 24/7 and revised every single day so you ll always be completely up to date. Save time With powerful search, alerts and links to related and superseded documents, finding the right document has never been easier. Reduce risk Having guaranteed access to the latest standards helps makes compliance with contracts or audit requirements simple. Get everything you need for less Choose from 53 subject related modules, or build your own collection with the standards you already use. Subscribing by subject area makes it affordable to have access to every standard in your industry. Start today Read case studies and arrange your free trial at: shop.bsigroup.com/bsolus1211 To contact us visit shop.bsigroup.com/bsolus1211 or contact Customer Services quoting marketing reference code BSOLM-US1211 T F orders@bsigroup.com shop.bsigroup.com/bsolus1211 Standards and publications may also be ordered via the BSI shop at shop.bsigroup.com *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0) BSI British Standards Institution 2012

8 British Standards Quick Reference Guide continued... BS ISO BS ISO PD CEN/TS , 38 PD CEN ISO/TR PD CEN ISO/TR PD PD PD Alpha-numeric sequence of British Standards quoted in this issue BS BS BS BS BS 143 and BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS , 25 BS BS BS BS BS BS , 23 BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS , 20 BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS 381C...23 BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS , 35 BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS , 35 BS BS BS BS BS BS BS BS BS , 27 BS BS BS BS BS , 35 BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS , 35 BS , 38 BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS , 35 BS BS BS , 29 BS BS BS BS BS BS BS BS BS BS , 36 BS BS BS BS , 29 BS BS BS BS BS BS BS BS BS BS BS BS BS Update Standards November 2012 Prices may be subject to change.

9 NEW PD 5500:2012 Specification for unfired fusion welded pressure vessels Get the latest PD 5500:2012 specification for unfired fusion welded pressure vessels. This new and assessing pressure vessels. to BS 5500 or PD What s new? PD 5500:2012 outlines the latest amendments to the specification up to and including those published in September It also includes details of enquiry cases and will be updated every three years. Your PD 5500 subscription includes free updates on further amendments. The start of new three-year cycle will include updates and new enquiry cases. The three-year subscription to PD 5500 includes free regular updates as amendments are made to the specification. Key 2012 revisions include: for large tube diameters in the evaluation of test pressure Key features: for PED compliance made during last three years shop.bsigroup.com/pd5500us1211 To contact us visit or contact PD5500-US1211 T F shop.bsigroup.com/pd5500us1211 Standards and publications may also be ordered via the BSI shop at shop.bsigroup.com *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0) BSI British Standards Institution 2012

10 Alpha-numeric Sequence of British Standards continued... BS BS BS BS BS BS BS BS , 36 BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS 9070 N BS 9070 N BS 9073 N BS 9074 N BS 9074 N BS 9075 N BS 9075 N BS 9076 N001 to BS BS BS 9131 N001 to BS 9133 N001 to BS BS DD DD DD DD DD DD , 38 DD CEN/TS DD CEN/TS , 38 DD CEN/TS DD CEN/TS DD CEN ISO/TS , 39 DD CEN ISO/TS , 39 DD DD DD BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN ISO/IEC , 38 BS EN BS EN , 38 BS EN , 38 BS EN BS EN BS EN BS EN ISO BS EN BS EN BS EN BS EN ISO , 38 BS EN BS EN BS EN BS EN ISO , 38 BS EN ISO BS EN ISO BS EN ISO , 38 BS EN ISO , 38 BS EN ISO BS EN ISO , 38 BS EN ISO BS EN BS EN BS EN BS EN BS EN ISO BS EN BS EN ISO , 38 BS EN BS EN ISO BS EN BS EN ISO , 38 BS EN BS EN BS EN BS EN BS EN ISO BS EN BS EN BS EN , 14 BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN ISO , 39 BS EN ISO , 39 BS EN ISO BS EN ISO BS EN ISO BS EN ISO , 36 BS EN , 38 BS EN ISO , 20 BS EN , 38 BS EN , 38 BS EN BS EN BS EN BS EN BS EN , 38 BS EN , 21 BS EN BS EN , 38 BS EN , 38 BS EN , 35 BS EN , 39 BS EN BS EN BS EN BS EN BS EN BS EN BS EN , 39 BS EN BS EN BS EN , 38 BS EN , 39 BS EN BS EN , 17 BS EN BS EN BS EN , 39 BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN , 35 DD ENV BS ISO BS ISO BS ISO BS ISO , 35 BS ISO BS ISO BS ISO BS ISO , 35 BS ISO BS ISO , 45 BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO , 39 BS ISO , 39 BS ISO , 38 BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO/IEC BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO/IEC BS ISO BS ISO Update Standards November 2012 Prices may be subject to change.

11 Alpha-numeric Sequence of British Standards continued... BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO DD IEC/PAS DD IEC/PAS , 39 DD IEC/PAS , 39 PD CEN/TR PD CEN/TR PD CEN/TR PD CEN/TR PD CEN/TS , 38 PD CEN/TS PD CEN ISO/TR PD CEN ISO/TR PD CEN ISO/TS PD PD PD PD PD PD PD PD PD PD PD PD PD PD PD CISPR/TR PD CISPR/TR PD CISPR/TR PD ISO/TR PD ISO/TS PD ISO/TS PD ISO/TS PD ISO/TR PD ISO/TS PD ISO/TS PD ISO/IEC TS PD CLC/TR PD IEC/TS PD IEC/TS PD IEC/TS , 39 PD IEC/TS BS 2A BS 2A BS 2A BS 2A BS 2A BS A BS A 55 AND BS 2A BS 2A BS 2A BS 2A BS 2A BS A BS 3A BS 4A BS 3A BS 3A BS 4A BS 4A BS 2A BS 3A BS A BS A BS 4A BS 2A BS 2A BS A BS A 242; A 243; A 244; A BS A 246; A 247; A 248; A BS A 250; A 251; A 252; A BS A 281; A 282 [...]...40 BS A 287; A 288 [...]...40 BS 2C BS C BS 2E BS 4F BS 4F BS 3F BS 3F BS 2F BS 2F BS 4F BS 3F BS 4F BS 3F BS 3F BS 5F BS 4F BS 3F BS F BS 3F BS F BS F BS F BS F BS 3G BS G BS G BS G BS G 184 to G BS G BS G BS G BS 4G BS G BS G BS 2G BS G BS G BS 3G BS 4J BS 4J BS 4K BS 5L BS 5L BS 3L BS 3L BS 4L BS 4L BS 3L BS 3L BS 3L BS 2L BS 2L BS 3L BS 2L BS 2L BS 2L BS 2L BS L BS 3L BS 3L BS 2L BS L BS L BS L BS L BS L BS L BS L BS 2L BS 2L BS 2L BS 2L BS 2L BS 2L BS L BS L BS L BS M BS 7S BS 4S BS 5S BS 5S BS 4S BS 3S BS 3S BS 3S BS 2S BS 2S BS 3S BS 2S BS 2S BS 3S BS 2S BS 2S BS 2S BS 2S BS 2S BS 2S BS 2S BS S BS 2S BS S BS S BS S BS 5T BS 4T BS 2T BS T BS T BS T BS T BS T BS T BS T BS 5V BS 2W BS 2W BS 2X BS 2X BS HC BS HC BS HC BS HC BS HC BS HC BS HC BS HC BS MA BS MA BS 2SP BS SP BS SP 28 and BS SP 31 and BS SP BS 2SP BS 2SP BS SP BS 2SP BS 2SP BS 2SP BS 2SP BS SP BS 3SP BS 3SP BS 2TA BS 2TA BS 2TA BS 2TA BS 2TA BS 2TA BS 2TA BS 2TA BS TA BS TA BS TA BS TA BS TA BS AU , 45 BS AU PAS , 45 PAS PAS , 45 Update Standards November 2012 Prices may be subject to change. 11

12 British Standards BRITISH STANDARDS The following British Standard publications are available from BSI Customer Services (see How to order on page 2). The publications listed below are new and revised British Standards that were made available last month. An existing BSI publication bearing a number identical to one announced below is automatically withdrawn unless stated otherwise. In all other cases of supersession, details are given and a corresponding entry appears in the British Standards withdrawn section. BRITISH STANDARD IMPLEMENTATIONS WILL BE SUPPLIED IN PREFERENCE TO EUROPEAN OR INTERNATIONAL STANDARDS, UNLESS OTHERWISE REQUESTED. Please order by the British Standard reference not the ISBN number. BS 2000 series standards are also available from: Library of the Energy Institute 61 New Cavendish Street London W1G 7AR Tel: Fax: lis@energyinst.org.uk For this series, member pricing is applicable to BSI and Energy Institute members. BS 750:2012 Specification for underground fire hydrants and surface box frames and covers supersedes BS 750:2006 ISBN FSH/17/8 BS 903-0:2012 Physical testing of rubber. General supersedes BS 903-0:2003 ISBN PRI/22 BS 5970:2012 Thermal insulation of pipework, ductwork, associated equipment and other industrial installations in the temperature range of -100ºC to +870ºC. Code of practice supersedes BS 5970:2001 ISBN members, non-members B/540 BS 6004:2012 Electric cables. PVC insulated and PVC sheathed cables for voltages up to and including 300/500 V, for electric power and lighting supersedes BS 6004:2000, which remains current. It partially supersedes BS 7919:2001 ISBN members, non-members GEL/20/17 BS :2012 Maritime works. General. Code of practice for geotechnical design supersedes BS :2000 which remains current ISBN members, non-members CB/502 BS 7211:2012 Electric cables. Thermosetting insulated and thermoplastic sheathed cables for voltages up to and including 450/750 V for electric power and lighting and having low emission of smoke and corrosive gases when affected by fire supersedes BS 7211:1998 which remains current ISBN members, non-members GEL/20/17 BS 7255:2012 Code of practice for safe working on lifts supersedes BS 7255:2001 ISBN members, non-members MHE/4 BS :2012 Library objects for architecture, engineering and construction. Shape and measurement. Code of practice ISBN B/555 BS :2012 Library objects for architecture, engineering and construction. Attributes for specification and assessment. Code of practice ISBN B/555 BS EN PUBLICATIONS The following are British Standard implementations of the English language versions of European Standards (ENs). BSI has an obligation to publish all ENs and to withdraw any conflicting British Standards. This has led to a series of standards, BS ENs, using the EN number. Note: The date referenced in the identifier is the date of the European standard. BS EN 650:2012 Resilient floor coverings. Polyvinyl chloride floor coverings on jute backing or on polyester felt backing or on a polyester felt with a polyvinyl chloride backing. Specification supersedes BS EN 650:1997 ISBN PRI/3/60 BS EN :2012 Methods of test for ancillary components for masonry. Determination of the initial shear strength between the prefabricated part of a composite lintel and the masonry above it ISBN B/519/3 BS EN 892:2012 Mountaineering equipment. Dynamic mountaineering ropes. Safety requirements and test methods supersedes BS EN 892:2004 ISBN SW/136/5 BS EN ISO/IEC 17065:2012 Conformity assessment. Requirements for bodies certifying products, processes and services supersedes BS EN 45011:1998 ISBN members, non-members CAS/1 BS EN :2012 Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines. Roll handling systems ISBN members, non-members MCE/3/9 BS EN 1728:2012 Furniture. Seating. Test methods for the determination of strength and durability supersedes BS EN 1728:2001 ISBN members, non-members FW/0/1 BS EN :2012 Tests for chemical properties of aggregates. Sorting test to determine metal content of Municipal Incinerator Bottom Ash (MIBA) Aggregates ISBN B/502/6 BS EN ISO 1828:2012 Health informatics. Categorial structure for terminological systems of surgical procedures supersedes BS EN 1828:2002 ISBN IST/35 BS EN 1839:2012 Determination of explosion limits of gases and vapours supersedes BS EN 1839:2003 ISBN members, non-members EXL/23 12 Prices may be subject to change. Update Standards November 2012

13 BS EN :2012 Safety of woodworking machines. Circular sawing machines. Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading supersedes BS EN :2000+A1:2009 ISBN members, non-members MTE/23 BS EN 3464:2012 Aerospace series. Titanium alloy (Ti-6Al-4V). Annealed. Plate. 6 mm < a 100 mm supersedes BS EN 3464:2009 ISBN members, non-members ACE/61/-/49 BS EN ISO :2012 Industrial trucks. Safety requirements and verification. Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks supersedes BS EN 1551:2000 and BS EN :1999 ISBN members, non-members MHE/7 BS EN :2012 Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Bending test supersedes BS EN :2002 ISBN members, non-members ACE/6 BS EN :2012 Aerospace series. Test method for metallic materials. Ultrasonic inspection of bars, plates, forging stock and forgings. General requirements ISBN ACE/61 BS EN :2012 Aerospace series. Test method for metallic materials. Ultrasonic inspection of bars, plates, forging stock and forgings. Performance of test ISBN ACE/61 BS EN :2012 Aerospace series. Test method for metallic materials. Ultrasonic inspection of bars, plates, forging stock and forgings. Reference blocks ISBN ACE/61 BS EN :2012 Aerospace series. Test method for metallic materials. Ultrasonic inspection of bars, plates, forging stock and forgings. Acceptance criteria ISBN members, non-members ACE/61 BS EN :2012 Aerospace series. Weldability and brazeability of materials in aerospace constructions. Welding and brazing of homogeneous assemblies of high alloyed steels ISBN members, non-members ACE/61 BS EN ISO 4920:2012 Textile fabrics. Determination of resistance to surface wetting (spray test) supersedes BS EN 24920:1992 ISBN TCI/24 BS EN ISO 5755:2012 Sintered metal materials. Specifications ISBN members, non-members ISE/65 BS EN ISO :2012 Plastics. Acquisition and presentation of comparable multipoint data. Thermal and processing properties supersedes BS EN ISO :2004 ISBN PRI/21 BS EN ISO :2012 Ophthalmic implants. Intraocular lenses. Vocabulary supersedes BS EN ISO :2006 ISBN CH/172/7 BS EN 12252:2012 LPG equipment and accessories. Equipping of LPG road tankers supersedes BS EN 12252:2005+A1:2008 ISBN members, non-members PVE/19 BS EN 12467:2012 Fibre-cement flat sheets. Product specification and test methods supersedes BS EN 12467:2004 ISBN members, non-members B/542/4 BS EN ISO 13102:2012 Geometrical product specifications (GPS). Dimensional measuring equipment. Electronic digital-indicator gauge. Design and metrological characteristics ISBN TDW/4 BS EN :2012 Spectator facilities. General characteristics for spectator viewing area supersedes BS EN :2003 ISBN members, non-members B/552 BS EN ISO 14457:2012 Dentistry. Handpieces and motors supersedes BS EN ISO 11498:2000, BS EN ISO 13294:1997, BS EN ISO :1999 and BS EN ISO :1998 ISBN members, non-members CH/106/4 BS EN :2012 Railway applications. Track. Flash butt welding of rails. Welding in association with crossing construction ISBN members, non-members RAE/2 BS EN 14626:2012 Ambient air. Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy supersedes BS EN 14626:2005 ISBN members, non-members EH/2/3 BS EN ISO :2012 (CD-ROM) (BS EN 15986:2011) Medical devices. Symbols to be used with medical device labels, labelling and information to be supplied. General requirements supersedes BIP 3083:2009 ISBN members, non-members CH/210/3 VAT is applicable to this item BS EN :2012 Railway applications. Axlebox condition monitoring. Interface and design requirements. Performance and design requirements of onboard systems for temperature monitoring ISBN RAE/3/-/5 BS EN :2012 Sealants for non-structural use in joints in buildings and pedestrian walkways. Sealants for facade elements supersedes BS EN :2010 ISBN B/547 BS EN :2012 Sealants for non-structural use in joints in buildings and pedestrian walkways. Sealants for glazing supersedes BS EN :2010 ISBN B/547 Update Standards November 2012 Prices may be subject to change. 13

14 BS EN Publications continued... BS EN :2012 Sealants for non-structural use in joints in buildings and pedestrian walkways. Sealants for sanitary joints supersedes BS EN :2010 ISBN B/547 BS EN :2012 Sealants for non-structural use in joints in buildings and pedestrian walkways. Sealants for pedestrian walkways supersedes BS EN :2010 ISBN B/547 BS EN :2012 Sealants for non-structural use in joints in buildings and pedestrian walkways. Evaluation of conformity and marking supersedes BS EN :2010 ISBN members, non-members B/547 BS EN 15933:2012 Sludge, treated biowaste and soil. Determination of ph ISBN H/-/4 BS EN 15934:2012 Sludge, treated biowaste, soil and waste. Calculation of dry matter fraction after determination of dry residue or water content ISBN H/-/4 BS EN 15935:2012 Sludge, treated biowaste, soil and waste. Determination of loss on ignition ISBN H/-/4 BS EN 15936:2012 Sludge, treated biowaste, soil and waste. Determination of total organic carbon (TOC) by dry combustion ISBN H/-/4 BS EN 16054:2012 BMX bicycles. Safety requirements and test methods ISBN members, non-members GME/25 BS EN 16122:2012 Domestic and non-domestic storage furniture. Test methods for the determination of strength, durability and stability ISBN members, non-members FW/0/2 BS EN 16166:2012 Sludge, treated biowaste and soil. Determination of adsorbable organically bound halogens (AOX) ISBN H/-/4 BS EN 16167:2012 Sludge, treated biowaste and soil. Determination of polychlorinated biphenyls (PCB) by gas chromatography with mass selective detection (GC-MS) and gas chromatography with electron-capture detection (GC-ECD) ISBN members, non-members H/-/4 BS EN 16168:2012 Sludge, treated biowaste and soil. Determination of total nitrogen using dry combustion method ISBN H/-/4 BS EN 16169:2012 Sludge, treated biowaste and soil. Determination of Kjeldahl nitrogen ISBN H/-/4 BS EN 16173:2012 Sludge, treated biowaste and soil. Digestion of nitric acid soluble fractions of elements ISBN H/-/4 BS EN 16174:2012 Sludge, treated biowaste and soil. Digestion of aqua regia soluble fractions of elements ISBN H/-/4 BS EN 16179:2012 Sludge, treated biowaste and soil. Guidance for sample pretreatment ISBN members, non-members H/-/4 BS EN :2012 Sustainability criteria for the production of biofuels and bioliquids for energy applications. Principles, criteria, indicators and verifiers. Terminology ISBN PTI/20 BS EN :2012 Sustainability criteria for the production of biofuels and bioliquids for energy applications. Principles, criteria, indicators and verifiers. Biodiversity and environmental aspects related to nature protection purposes ISBN PTI/20 BS EN 16224:2012 Healthcare provision by chiropractors ISBN members, non-members SVS/18/1 BS EN 16231:2012 Energy efficiency benchmarking methodology ISBN SEM/1/2 BS EN 16270:2012 (BS :2012) Automotive fuels. Determination of highboiling components including fatty acid methyl esters in petrol. Gas chromatographic method ISBN members, non-members PTI/13 Available from the Institute of Petroleum, see the British Standards section foreword for ordering information BS EN 16274:2012 Methods for analysis of allergens. Quantification of suspected fragrance allergens in consumer products. Step 1: GC analysis of ready-to-inject sample ISBN CW/217 BS EN 16300:2012 (BS :2012) Automotive fuels. Determination of iodine value in fatty acid methyl esters (FAME). Calculation method from gas chromatographic data ISBN members, non-members PTI/13 Available from the Institute of Petroleum, see the British Standards section foreword for ordering information 14 Update Standards November 2012 Prices may be subject to change.

15 NEW European standard for general audit BS EN Energy audit Can you afford not to have an energy audit? The first step towards reducing energy consumption and increasing energy efficiency is to carry out an energy audit. BS EN Energy Audits helps to identify energy saving opportunities within your organization allowing you to deal with waste and inefficiencies and improving your returns on investment. This standard defines what constitutes a good energy audit so that you can feel confident that whatever the size or type of your organization, you are able to control energy use, reduce energy costs and meet your environmental responsibilities. And if you re a consultant, you can offer the best energy audit advice, standardized to meet the European Energy Services Directive 2006/32/EC. Use the standard alone or in conjunction with BS EN ISO Energy Management Systems to enjoy the benefits of good energy management practice. shop.bsigroup.com/bsen16247us1211 Why not take a Quick look at some BS EN ISO Energy Management case studies: shop.bsigroup.com/50001casestudiesus1211 To contact us visit shop.bsigroup.com/bsen16247us1211 or contact Customer Services quoting marketing reference code US1211 T F orders@bsigroup.com shop.bsigroup.com/bsen16247us1211 Standards and publications may also be ordered via the BSI shop at shop.bsigroup.com *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0) BSI British Standards Institution 2012

16 BS EN Publications continued... BS EN ISO 17261:2012 Intelligent transport systems. Automatic vehicle and equipment identification. Intermodal goods transport architecture and terminology supersedes DD CEN ISO/TS 17261:2005 ISBN members, non-members EPL/278 BS EN ISO 17262:2012 Intelligent transport systems. Automatic vehicle and equipment identification. Numbering and data structures supersedes DD CEN ISO/TS 17262:2003 ISBN members, non-members EPL/278 BS EN ISO :2012 Petroleum and natural gas industries. Sitespecific assessment of mobile offshore units. Jack-ups ISBN members, non-members B/525/12 BS EN ISO :2012 Dentistry. Periodontal probes. Designation ISBN members, non-members CH/106/4 BS EN ISO 23907:2012 Sharps injury protection. Requirements and test methods. Sharps containers supersedes BS 7320:1990 ISBN CH/84 BS EN :2012 Alarm systems. Alarm transmission systems and equipment. General requirements for alarm transmission systems supersedes BS EN :1998+A2:2008, BS EN :1998, BS EN :1998, BS EN :1998 and BS EN :2008 ISBN members, non-members GW/1/5 BS EN 50581:2012 Technical documentation for the assessment of electrical and electronic products with respect to the restriction of hazardous substances ISBN GEL/111 BS EN :2012 Rotating electrical machines. Functional evaluation of insulation systems. Test procedures for form-wound windings. Thermal evaluation and classification of insulation systems used in rotating machines supersedes BS EN :1994 ISBN PEL/2 BS EN :2012 Explosive atmospheres. Equipment. General requirements supersedes BS EN :2009 ISBN members, non-members EXL/31 BS EN :2012 Specifications for particular types of winding wires. General requirements. Polyester glass fibre wound, resin or varnish impregnated or not impregnated, bare or enamelled rectangular copper wire ISBN GEL/55 BS EN :2012 Specifications for particular types of winding wires. Polyester glass fibre wound, minimum class 180, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180 ISBN members, non-members GEL/55 BS EN :2012 Specifications for particular types of winding wires. Polyester glass fibre wound, minimum class 200 resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200 ISBN members, non-members GEL/55 BS EN 60440:2012 Method of measurement of non-linearity in resistors supersedes BS 5694:1979 ISBN EPL/40X BS EN :2012 Cable networks for television signals, sound signals and interactive services. Brandwith expansion for broadcast signal over FTTH system ISBN members, non-members EPL/100/4 BS EN :2012 Fibre optic interconnecting devices and passive components. Fibre optic spatial switches. Generic specification supersedes BS EN :2001 ISBN members, non-members GEL/86/2 BS EN :2012 Connectors for electronic equipment. Product requirements. Detail specification for shielded, free and fixed connectors for data transmission with frequencies up to 1000 MHz supersedes BS EN :2008 ISBN EPL/48 BS EN :2012 Industrial communication networks. Fieldbus specifications. Application layer service definition. Type 21 elements supersedes DD IEC/PAS 62573:2008 ISBN members, non-members AMT/7 BS EN :2012 Industrial communication networks. Fieldbus specifications. Application layer service definition. Type 22 elements ISBN members, non-members AMT/7 BS EN 61362:2012 Guide to specification of hydraulic turbine governing systems supersedes BS EN 61362:1998 ISBN members, non-members MCE/15 BS EN :2012 Low-voltage switchgear and controlgear assemblies. Busbar trunking systems (busways) supersedes BS EN :2000 ISBN members, non-members PEL/17/3 BS EN :2012 Liquid crystal display devices. Measuring methods for liquid crystal display modules. Transmissive type supersedes BS EN :2004 ISBN members, non-members EPL/47 BS EN :2012 Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces. Interface standard for LC connectors with protective housings related to IEC ISBN GEL/86/2 BS EN :2012 Railway applications. Rolling stock equipment. Capacitors for power electronics. Aluminium electrolytic capacitors with non solid electrolyte ISBN GEL/9/2 16 Update Standards November 2012 Prices may be subject to change.

17 BS EN :2012 Railway applications. Rolling stock equipment. Capacitors for power electronics. Electric double-layer capacitors ISBN members, non-members GEL/9/2 BS EN :2012 Industrial-process measurement and control. Data structures and elements in process equipment catalogues. List of Properties (LOP) of measuring equipment for electronic data exchange. Generic structures ISBN members, non-members AMT/7 BS EN :2012 Plasma display panels. Measuring methods. Acoustic noise ISBN EPL/47 BS EN :2012 Integrated circuits. Measurement of electromagnetic immunity. Measurement of radiated immunity. IC stripline method ISBN EPL/47 BS EN :2012 High-voltage switchgear and controlgear. Alternating current fused circuit-switchers for rated voltages above 1 kv up to and including 52 kv supersedes BS EN :2005 ISBN members, non-members PEL/17/1 BS EN :2012 Fuel cell technologies. Micro fuel cell power systems. Performance test methods supersedes BS EN :2008 ISBN GEL/105 BS EN :2012 OPC unified architecture. Alarms and conditions ISBN members, non-members AMT/7 BS EN :2012 OPC unified architecture. Programs ISBN members, non-members AMT/7 BS EN 62729:2012 Maritime navigation and radiocommunication equipment and systems. Shipborne equipment for long-range identification and tracking (LRIT). Performance requirements ISBN EPL/80 BS EN :2012 Preparation of instructions for use. Structuring, content and presentation. General principles and detailed requirements supersedes BS :1992, BS :1993, BS :1993 and BS EN 62079:2001 ISBN members, non-members GEL/3 BS ENs IMPLEMENTED BY AMENDMENT For the standards listed below see also the Corrigenda to British Standards section of this issue of Update Standards. BS EN ISO 30023:2012 Textiles. Qualification symbols for labelling workwear to be industrially laundered TCI/82 Implementation of European Standard EN ISO by amendment to BS ISO 30023:2010 BS IMPLEMENTATIONS BS Implementations comprise the ISO or IEC text without any national deviation and with front and back cover indicating the UK committee responsible. No other information will normally be added. Note: The date referenced in the identifier is the date of the international standard. BS ISO :2012 Fluid power systems and components. Graphical symbols and circuit diagrams. Circuit diagrams supersedes BS ISO :1995 ISBN members, non-members MCE/18 BS ISO 2919:2012 Radiological protection. Sealed radioactive sources. General requirements and classification supersedes BS 5288:1976 ISBN NCE/2 BS ISO :2012 Rubber- or plastics-coated fabrics. Determination of bursting strength. Steel-ball method ISBN TCI/69 BS ISO :2012 Rubber- or plastics-coated fabrics. Determination of bursting strength. Hydraulic method ISBN TCI/69 BS ISO 3819:1985 Laboratory glassware. Beakers supersedes BS 6523:1984 ISBN members, non-members LBI/36 BS ISO 4129:2012 Road vehicles. Mopeds. Symbols for controls, indicators and tell-tales ISBN AUE/14 BS ISO :2012 Truck and bus tyres and rims (metric series). Rims supersedes BS AU a:2002 ISBN AUE/4 BS ISO :2012 Cranes. Vocabulary. Mobile cranes ISBN MHE/3/5 BS ISO 4919:2012 Carpets. Determination of tuft withdrawal force ISBN members, non-members PRI/3/60 BS ISO :2012 Wrought aluminium and aluminium alloys. Extruded rods/bars, tubes and profiles. Round, square, rectangular and hexagonal tubes. Tolerances on shape and dimensions ISBN NFE/35 BS ISO :2012 Wrought aluminium and aluminium alloys. Extruded rods/bars, tubes and profiles. Chemical composition ISBN NFE/35 BS ISO 6487:2012 Road vehicles. Measurement techniques in impact tests. Instrumentation supersedes BS ISO 6487:2002+A1:2008 ISBN AUE/7 Update Standards November 2012 Prices may be subject to change. 17

18 BS Implementations continued... BS ISO 6533:2012 Forestry machinery. Portable chain-saw front hand-guard. Dimensions and clearances supersedes BS ISO 6533:2001 ISBN AGE/29 BS ISO 6727:2012 Road vehicles. Motorcycles. Symbols for controls, indicators and tell-tales ISBN AUE/14 BS ISO :2012 Mopeds. Measurement method for gaseous exhaust emissions and fuel consumption. General test requirements supersedes BS ISO 7859:2000 ISBN members, non-members AUE/14 BS ISO :2012 Mopeds. Measurement method for gaseous exhaust emissions and fuel consumption. Test cycles and specific test conditions supersedes BS ISO 7859:2000 ISBN AUE/14 BS ISO :2012 Mopeds. Measurement method for gaseous exhaust emissions and fuel consumption. Fuel consumption measurement at a constant speed supersedes BS ISO 7859:2000 ISBN AUE/14 BS ISO 8373:2012 Robots and robotic devices. Vocabulary supersedes BS EN ISO 8373:1996 ISBN members, non-members AMT/-/2 BS ISO 9772:2012 Cellular plastics. Determination of horizontal burning characteristics of small specimens subjected to a small flame supersedes BS ISO 9772:2001 ISBN PRI/26 Please do not send confirmation of orders placed by telephone as it can lead to duplication BS ISO 10575:2012 Resilient floor coverings. Specification for rubber sheet floor coverings with backing ISBN PRI/3/60 BS ISO 10577:2012 Resilient floor coverings. Specification for rubber sheet floor coverings without back ISBN PRI/3/60 BS ISO :2012 Cutter arbors with parallel key and tenon drive. Dimensions and designation of tool holders with polygonal taper interface with flange contact surface ISBN members, non-members MTE/18 BS ISO :2012 Cutter arbors with parallel key and tenon drive. Dimensions and designation of tool holders with modular taper interface with ball track system ISBN members, non-members MTE/18 BS ISO :2012 Paper and board. Testing of cores. Determination of natural frequency and flexural modulus by experimental modal analysis supersedes BS ISO :1997 ISBN PAI/11 BS ISO 11227:2012 Space systems. Test procedure to evaluate spacecraft material ejecta upon hypervelocity impact ISBN members, non-members ACE/68/-/8 BS ISO 11706:2012 Carbonaceous materials for the production of aluminium. Prebaked anodes. Determination of the fracture energy ISBN members, non-members CII/24 BS ISO :2012 Plastics. Post-consumer poly(ethylene terephthalate) (PET) bottle recyclates. Designation system and basis for specifications ISBN PRI/82 BS ISO :2012 Plastics. Post-consumer poly(ethylene terephthalate) (PET) bottle recyclates. Preparation of test specimens and determination of properties ISBN PRI/82 BS ISO :2011 Validation method for fire gas analysis. Limits of detection and quantification ISBN FSH/16 BS ISO 13063:2012 Electrically propelled mopeds and motorcycles. Safety specifications ISBN members, non-members AUE/14 BS ISO :2012 Battery-electric mopeds and motorcycles. Performance. Reference energy consumption and range ISBN AUE/14 BS ISO :2012 Battery-electric mopeds and motorcycles. Performance. Road operating characteristics ISBN AUE/14 BS ISO :2012 Fine ceramics (advanced ceramics, advanced technical ceramics). Microstructural characterization. Determination of grain size and size distribution ISBN RPI/13 BS ISO :2012 Fine ceramics (advanced ceramics, advanced technical ceramics). Microstructural characterization. Determination of phase volume fraction by evaluation of micrographs ISBN RPI/13 BS ISO :2012 Powered industrial trucks. Test methods for verification of visibility. Sit-on and stand-on operator trucks and variable-reach trucks up to and including 10 t capacity ISBN MHE/7 18 Update Standards November 2012 Prices may be subject to change.

19 BS ISO 13636:2012 Plastics. Film and sheeting. Non-oriented poly(ethylene terephthalate) (PET) sheets ISBN PRI/75 BS ISO 13971:2012 Refrigeration systems and heat pumps. Flexible pipe elements, vibration isolators, expansion joints and non-metallic tubes. Requirements and classification ISBN RHE/18 BS ISO 14610:2012 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for flexural strength of porous ceramics at room temperature ISBN members, non-members RPI/13 BS ISO 14721:2012 Space data and information transfer systems. Open archival information system (OAIS). Reference model supersedes BS ISO 14721:2003 ISBN members, non-members ACE/68/-/7 BS ISO :2012 Agricultural irrigation equipment. Sprinklers. Characterization of distribution and test methods supersedes BS ISO :2004 ISBN AGE/30 BS ISO :2012 Fire safety engineering. Fire risk assessment. General ISBN FSH/24 BS ISO 17155:2012 Soil quality. Determination of abundance and activity of soil microflora using respiration curves supersedes BS ISO 17155:2002 ISBN EH/4 BS ISO/IEC 17998:2012 Information technology. SOA Governance Framework ISBN members, non-members ICT/-/1 BS ISO :2012 Industrial automation systems and integration. Diagnostics, capability assessment and maintenance applications integration. Descriptions and definitions of application domain matrix elements ISBN members, non-members AMT/5 BS ISO :2012 Smoke and heat control systems. Specification for control equipment ISBN members, non-members FSH/25 BS ISO :2012 Statistical methods in process management. Capability and performance. Capability of measurement processes ISBN members, non-members SS/4 BS ISO 24616:2012 Language resources management. Multilingual information framework ISBN members, non-members TS/1 PUBLISHED DOCUMENTS PD CISPR/TR 30-1:2012 Test method on electromagnetic emissions. Electronic control gear for single- and doublecapped fluorescent lamps ISBN GEL/210/11 PD CISPR/TR 30-2:2012 Test method on electromagnetic emissions. Electronic control gear for discharge lamps excluding fluorescent lamps ISBN GEL/210/11 PD CISPR/TR 31:2012 Database on the characteristics of radio services supersedes PD CISPR/TR 31:2003 ISBN members, non-members GEL/210/12 PD ISO/TS 10974:2012 Assessment of the safety of magnetic resonance imaging for patients with an active implantable medical device ISBN members, non-members CH/150/2 PD CEN ISO/TR 11811:2012 Nanotechnologies. Guidance on methods for nano- and microtribology measurements ISBN NTI/1 PD CEN/TS :2012 Plastics piping systems for non-pressure underground drainage and sewerage. Polyethylene (PE). Guidance for the assessment of conformity supersedes DD CEN/TS :2005 ISBN PRI/88/1 PD ISO/TS 12911:2012 Framework for building information modelling (BIM) guidance ISBN members, non-members B/555 PD ISO/TS 13896:2012 Soil quality. Determination of linear alkylbenzene sulfonate (LAS). Method by HPLC with fluorescence detection (LC-FLD) and mass selective detection (LC-MSD) ISBN EH/4 PD ISO/TR :2012 Health informatics. Capacity-based ehealth architecture roadmap. Overview of national ehealth initiatives ISBN members, non-members IST/35 PD CEN/TR 15003:2012 Durability of wood and wood-based products. Criteria for hot air processes for curative uses against wood destroying organisms supersedes PD CEN/TS 15003:2005 ISBN B/515 PD CEN ISO/TR 16178:2012 Footwear. Critical substances potentially present in footwear and footwear components supersedes PD CEN ISO/TR 16178:2010 ISBN members, non-members TCI/69 PD CEN/TR 16324:2012 Technical report of the interlaboratory study for the determination of Besatz in common wheat, rye and durum wheat ISBN members, non-members AW/4 Update Standards November 2012 Prices may be subject to change. 19

20 Published Documents continued... PD CEN/TR 16388:2012 Gas-Specific Environmental Document. Guideline for incorporating within standards to minimize the environmental impact of gas infrastructure across the whole life cycle ISBN GSE/33 PD CEN ISO/TS :2012 Electronic fee collection. Evaluation of equipment for conformity to ISO/TS Abstract test suite ISBN EPL/278 PD CEN/TR 16412:2012 Supply chain security (SCS). Good practice guide for small and medium sized operators ISBN OS/1/-/4 PD ISO/TS 16974:2012 Respiratory protective devices. Marking and information supplied by the manufacturer ISBN PH/4 PD ISO/TS :2012 Horizontal methods for molecular biomarker analysis. Methods of analysis for the detection of genetically modified organisms and derived products. Construct-specific real-time PCR method for detection of event FP967 in linseed and linseed products ISBN AW/275 PD ISO/IEC TS 24790:2012 Information technology. Office equipment. Measurement of image quality attributes for hardcopy output. Monochrome text and graphic images ISBN members, non-members IST/3 PD CLC/TR :2012 Railway applications. Rolling stock. Intercommunication between vehicles and train/wayside. Technical contents of standardization work in the field of intercommunication ISBN members, non-members GEL/9/2 PD IEC/TS :2012 Rotating electrical machines. On-line partial discharge measurements on the stator winding insulation of rotating electrical machines ISBN members, non-members PEL/2 PD IEC/TS :2012 Marine energy. Wave, tidal and other water current converters. Electricity producing wave energy converters. Power performance assessment ISBN members, non-members PEL/114 PD IEC/TS :2012 Process management for avionics. Electronic components for aerospace, defence and high performance (ADHP) applications. General requirements for high reliability integrated circuits and discrete semiconductors supersedes DD IEC/PAS :2011 ISBN members, non-members GEL/107 PD IEC/TS 62758:2012 Calibration of space charge measuring equipment based on the pulsed electroacoustic (PEA) measurement principle ISBN members, non-members GEL/112 PUBLICLY AVAILABLE SPECIFICATIONS Publicly Available Specifications (formerly Product Assessment Specifications) are issued to provide an interim document where there is a market need but where a full British or European Standard has yet to be published. PAS 79:2012 Fire Risk Assessment. Guidance and a recommended methodology supersedes PAS 79:2007 ISBN members, non-members PAS 79:2012 is provided with editable PDF versions of the example risk assessment forms (and their regional variations) that constitute Annexes B and E of PAS 79:2012. If you purchase a hard copy, these editable PDF forms are supplied on an accompanying CD-ROM. If you download an electronic copy through BSI Shop or BSOL, please call BSI Customer Services +44 (0) who will advise how to obtain these editable PDFs. The forms are provided as guidance and should only be used in conjunction with PAS 79:2012. PAS 82:2012 Shopfitting and interior contracting. Management system specification supersedes PAS 82:2009 ISBN members, non-members PAS 99:2012 Specification of common management system requirements as a framework for integration supersedes PAS 99:2006 ISBN members, non-members CORRIGENDA TO BRITISH STANDARDS Most amendments are not issued separately. Those that make significant changes to a standard are incorporated into the standard which is reissued (see Updated British Standards). British Standards which have been corrected via corrigenda are available on request, free of charge to past purchasers of the standard. All amendments and corrigenda to date of despatch are included within any main publication when ordered for the first time. The following corrigenda to British Standards were made available last month. BS :2011 Methods of test for petroleum and its products. Determination of the manganese content of gasoline. Atomic absorption spectrometry (AAS) method CORRIGENDUM 1 PTI/13 BS EN :2009 Bituminous mixtures. Test methods for hot mix asphalt. Determination of the maximum density CORRIGENDUM 1 B/510/1 BS EN :2009+A3:2011 Unfired pressure vessels. Inspection and testing CORRIGENDUM 2 PVE/1 BS EN ISO 13485:2012 Medical devices. Quality management systems. Requirements for regulatory purposes CORRIGENDUM 1 CH/210/1 BS EN 15830:2012 Rough-terrain variable reach trucks. Visibility. Test methods and verification CORRIGENDUM 1 MHE/7 BS EN ISO 30023:2012 Textiles. Qualification symbols for labelling workwear to be industrially laundered CORRIGENDUM 1 TCI/82 20 Update Standards November 2012 Prices may be subject to change.

21 BS EN 50239:1999 Railway applications. Radio remote control system of traction vehicle for freight traffic CORRIGENDUM 1 GEL/9 BS EN 50388:2012 Railway Applications. Power supply and rolling stock. Technical criteria for the coordination between power supply (substation) and rolling stock to achieve interoperability CORRIGENDUM 1 GEL/9/2 BS EN :2010 Explosive atmospheres. Material characteristics for gas and vapour classification. Test methods and data CORRIGENDUM 1 EXL/31 BS EN :2001+A1:2006 Lamp controlgear. Particular requirements for ballasts for fluorescent lamps CORRIGENDUM 3 CPL/34/3 BS EN :2012 Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles. Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories CORRIGENDUM 1 PEL/23/4 PD ISO/TR 10687:2012 Mechanical vibration. Description and determination of seated postures with reference to whole-body vibration CORRIGENDUM 1 GME/21/6 DD IEC/PAS :2008 Household and similar electrical appliances. Test code for the determination of airborne acoustical noise. Particular requirements for household food waste disposers CORRIGENDUM 1 CPL/59 UPDATED BRITISH STANDARDS The following standards have been amended and the amendments have been incorporated into an updated standard. NOTE: Updated British Standards must be reordered as the amendments are not available separately. BS 5372:1997+A1:2012 Specification for Dimensions of cable terminations for multi-core extruded solid dielectric insulated distribution cables of rated voltages 600/1000 V and 1900/3300 V having copper or aluminium conductors AMENDMENT members, non-members GEL/20/11 BS :1990+A1:2012 (ISO 7513:1990+A1:2012) Instant tea in solid form. Determination of moisture content (loss in mass at 103º) AMENDMENT members, non-members AW/8 BS :2006+A1:2012 Concrete. Complementary British Standard to BS EN Method of specifying and guidance for the specifier AMENDMENT members, non-members B/517/1 BS :2006+A1:2012 Concrete. Complementary British Standard to BS EN Specification for constituent materials and concrete AMENDMENT members, non-members B/517/1 BS EN 161:2011+A2:2012 Automatic shut-off valves for gas burners and gas appliances AMENDMENT members, non-members GSE/22 BS EN 408:2010+A1:2012 Timber structures. Structural timber and glued laminated timber. Determination of some physical and mechanical properties AMENDMENT members, non-members B/518 BS EN 934-2:2009+A1:2012 Admixtures for concrete, mortar and grout. Concrete admixtures. Definitions, requirements, conformity, marking and labelling AMENDMENT 1 B/517/3 BS EN ISO 5172:2006+A1:2012 Gas welding equipment. Blowpipes for gas welding, heating and cutting. Specifications and tests AMENDMENT members, non-members WEE/18 BS EN 12004:2007+A1:2012 Adhesives for tiles. Requirements, evaluation of conformity, classification and designation AMENDMENT members, non-members B/539 BS EN 14992:2007+A1:2012 Precast concrete products. Wall elements AMENDMENT members, non-members B/524 BS EN 15050:2007+A1:2012 Precast concrete products. Bridge elements AMENDMENT members, non-members B/524 BS EN ISO 20643:2008+A1:2012 Mechanical vibration. Hand-held and handguided machinery. Principles for evaluation of vibration emission AMENDMENT 1 MCE/8/-/2 BS EN 50521:2008+A1:2012 Connectors for photovoltaic systems. Safety requirements and tests AMENDMENT members, non-members GEL/82 BS EN :2003+A12:2012 Household and similar electrical appliances. Safety. Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances AMENDMENT members, non-members CPL/61/7 BS EN :1998+A1:2011 Plastic films for electrical purposes. Specifications for individual materials. Biaxially oriented polypropylene (PP) films for capacitors AMENDMENT members, non-members GEL/15 BS EN :2004+A1:2011 Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Specifications for individual materials. Requirements for rigid laminated sheets based on epoxy resins AMENDMENT 1 GEL/15/6 BS EN :2003+A13:2012 Electrical accessories. Circuit breakers for overcurrent protection for household and similar installations. Circuit-breakers for a.c. operation AMENDMENT members, non-members PEL/23/1 PD CISPR/TR 16-3:2010+A1:2012 Specification for radio disturbance and immunity measuring apparatus and methods. CISPR technical reports AMENDMENT members, non-members GEL/210/12 BS ISO 1138:2007+A1:2012 Rubber compounding ingredients. Carbon black. Determination of sulfur content AMENDMENT members, non-members PRI/23 Update Standards November 2012 Prices may be subject to change. 21

22 Updated British Standards continued... BS ISO :2005+A1:2012 Motorcycles. Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles. Definitions, symbols and general considerations AMENDMENT members, non-members AUE/14 BS ISO :2005+A1:2012 Motorcycles. Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles. Injury indices and risk/benefit analysis AMENDMENT members, non-members AUE/14 BS ISO :2005+A1:2012 Motorcycles. Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles. Documentation and reports AMENDMENT members, non-members AUE/14 BS ISO/IEC :2010+A2:2012 Identification cards. Contactless integrated circuit cards. Proximity cards. Radio frequency power and signal interface AMENDMENT members, non-members IST/17 BS ISO 15643:2002+A1:2012 Road construction and maintenance equipment. Bituminous binder spreaders/sprayers. Terminology and commercial specifications AMENDMENT 1 B/513 PD 5500:2012+A1:2012 Specification for unfired fusion welded pressure vessels AMENDMENT members, 1, non-members PVE/1 BS A 31-54:1951+A6:2012 Specification for British Association (B.A.) low tensile screws and nuts for aeronautical purposes AMENDMENT 6 BS A 55 AND 56:1951+A3:2012 Specifications for grub screws for aeronautical purposes AMENDMENT members, non-members BS A 101:1969+A3:2012 Specification for general requirements for titanium bolts AMENDMENT 3 BS 4A 104:2002+A2:2012 Specification for corrosion-resisting steel bolts (Unified hexagons and Unified threads), strength class 880 MPa, for aircraft AMENDMENT 2 BS 4A 114:1999+A1:2012 Specification for corrosion-resisting steel, mushroom-headed, slotted-drive, bolts, strength class 880 MPa AMENDMENT members, non-members SPECIAL ANNOUNCEMENTS Comments can be sent by or by post to named contacts at: BSI Group 389 Chiswick High Road London W4 4AL Tel: There has been discussion to change the structure of BSI committees pertaining to Laboratory safety and equipment. LBI/1 would take key information from other BSI committees which deal with aspects of Laboratory equipment and safety information on such as Laboratory related graphical symbols which refer to; and the standard BS ISO 7000, also aspects of personal protective equipment and look to producing information sheet for public dissemination to those outside of the existing BSI committee structure. The information sheet could be broken into four main areas: 1 Fixed elements furniture and fittings, such as; fume cupboard, control devices, etc. 2 Related apparatus, such as; pipettes petri dishes, etc. 3 Safety: PPE, Graphical symbols. 4 Environment consideration: Air and water quality. Possibly with a General/miscellaneous section on any changes to fire standards pertinent to the area or any other horizontal points interest which people may raise. LBI/1 Laboratory safety and equipment. Overview: Under the direction of the Standards Policy and Strategy Committee, is responsible for the preparation and maintenance of information about the developments of Standards within laboratory safety and equipment. The committee is also responsible for the looking into aspects of the Laboratory safety and equipment Regulations 1999 and provides guidance, where necessary to the other sub-committees listed below and other interested BSI committees. - LBI/1/1 Laboratory furniture and fittings Membership: Unchanged from LBI/18 - LBI/1/2 Laboratory Glassware and related apparatus Membership: Unchanged from LBI/36 For more information and if you wish to be directly involved within LBI/1, please contact the Programme Manager (below). Contact: Alex Price alex.price@bsigroup.com LBI/1 BS Code of practice for delivering good governance BSI has extended the public consultation period for this new standard to 30 November, Please go to the draft review system to read the standard and make comments Contact: Sara Walton sara.walton@bsigroup.com G/1 BRITISH STANDARDS PROPOSED FOR CONFIRMATION It is BSI policy for every standard to be reviewed by the technical committee responsible not more than five years after publication, to establish whether it is still current and, if it is not, to identify and set in hand appropriate action. Circumstances may lead to an earlier review. Confirmation indicates the continuing currency of a standard. A note of any objections to the proposals below should be sent to Debbie Stead, Head of Committee Service Centre and International Secretariat, BSI Group, 389 Chiswick High Road, London W4 4AL or via to BSUKoperations.review@bsigroup.com by 31 December, BS 21:1985 Specification for pipe threads for tubes and fittings where pressure-tight joints are made on the threads (metric dimensions) ISE/110 BS 57:1951 Specification. B.A. screws bolts and nuts FME/9 BS :1988 Timber for and workmanship in joinery. Specification for workmanship B/543 BS :1990 Timber for and workmanship in joinery. Specification for wood trim and its fixing B/543 BS 1187:1959 Specification for wood blocks for floors B/543 BS :1990 Float operated valves. Specification for piston type float operated valves (copper alloy body) (excluding floats) B/ Update Standards November 2012 Prices may be subject to change.

23 BS :1990 Float operated valves. Specification for diaphragm type float operated valves (copper alloy body) (excluding floats) B/504 BS :1990 Float operated valves. Specification for diaphragm type float operated valves (plastics bodied) for cold water services only (excluding floats) B/504 BS :1991 Float operated valves. Specification for compact type float operated valves for WC flushing cisterns (including floats) B/504 BS 1297:1987 Specification for tongued and grooved softwood flooring B/543 BS 1467:1972 Specification for folders and files FW/0 BS 1768:1963 Specification for Unified precision hexagon bolts, screws, & nuts (UNC & UNF threads). Normal series FME/9 BS 1769:1951 Specification. Unified black hexagon bolts, screws, nuts (UNC & UNF threads). Heavy series FME/9 BS 1802:1951 Specification for steel spring washers for general engineering and automobile purposes FME/9 BS :1956 Specification for screwed studs. General purpose studs FME/9 BS :1964 Specification for screwed studs. Recommendations for high grade studs (with Class 5 interference fit threads to American Standard ASA B1.12) FME/9 BS :1961 Specification for the tapping of holes to receive wire thread inserts (UNC and UNF threads). Diameters 1 4 in and over FME/9 BS :1966 Specification for the tapping of holes to receive wire thread inserts (UNC and UNF threads). Diameters below 1 4 in FME/9 BS 3410:1961 Specification for metal washers for general engineering purposes FME/9 BS :1993 Symbols for plastics and rubber materials. Schedule for symbols for compounding ingredients PRI/10 BS 3533:1981 Glossary of thermal insulation terms B/540 BS :2001 Glossary of rubber terms. Additional British terms PRI/10 BS 3692:2001 ISO metric precision hexagon bolts, screws and nuts. Specification FME/9/3 BS 381C:1996 Specification for colours for identification, coding and special purposes STI/14 BS :1966 Specification for mosaic parquet panels. Classification and quality requirements B/543 BS 4162:1983 Methods of test for buttons TCI/66 BS :1982 Hexagon socket screws and wrench keys: metric series. Specification for hexagon socket button head screws FME/9 BS 4174:1972 Specification for self-tapping screws and metallic drive screws FME/9 BS 4183:1967 Specification for machine screws and machine screw nuts. Metric series FME/9 BS 4190:2001 ISO metric black hexagon bolts, screws and nuts. Specification FME/9/3 BS 4407:1988 Methods for quantitative analysis of fibre mixtures TCI/80 BS 4438:1969 Specification for filing cabinets and suspended filing pockets FW/0 BS 4560:1990 Specification for fabrics for linings in uniform clothing TCI/66 BS :1982 Specification for approval testing of welders when welding procedure approval is not required. Fusion welding of steel WEE/36 BS :1976 Specification for approval testing of welders when welding procedure approval is not required. TIG or MIG welding of aluminium and its alloys WEE/36 BS :1973 Specification for steel hexagon prevailingtorque type nuts. Metric series FME/9 BS :1973 Specification for steel hexagon prevailingtorque type nuts. Unified (inch) series FME/9 BS :1992 Method of test for rubber and plastics hoses and hose assemblies. General introduction PRI/66 BS :1999 Specification for hospital bedding. Combustion modified, flexible polyurethane, general purpose foam mattress cores. Specification FW/0/2 BS :1976 Specification for hospital bedding. Mattress covers of polyurethane coated nylon FW/0/2 BS 5357:2007 Code of practice for installation and application of security glazing B/520/3 BS 5615:1985 Specification for insulating jackets for domestic hot water storage cylinders B/540 BS :1995 Lifts and service lifts. Specification for the testing and examination of lifts and service lifts. Electric lifts. Commissioning tests for new lifts MHE/4 BS :1995 Lifts and service lifts. Specification for the testing and examination of lifts and service lifts. Hydraulic lifts. Commissioning tests for new lifts MHE/4 BS :1991 Medical electrical equipment. Particular requirements for performance. Method of declaring parameters for lung ventilators CH/121/5 Update Standards November 2012 Prices may be subject to change. 23

24 British Standards Proposed for Confirmation continued... BS :1980 Recommendations for testing of aggregates. Compactibility test for graded aggregates B/502 BS :1999 Domestic kitchen equipment. Performance requirements for durability of surface finish and adhesion of surfacing and edging materials. Specification FW/0/2 BS :2001 Quicklime, hydrated lime and natural calcium carbonate. Methods for chemical analysis B/516/11 BS 6604:1985 Code of practice for safe operation of starter batteries PEL/21 BS :2000 Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water. Specification EH/6 BS :2000 Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of water. Methods of test EH/6 BS :1990 Thermal and radiometric properties of glazing. Method for direct measurement of U-value (thermal transmittance) B/540 BS :2007 Code of practice for the operation of fire protection measures. Actuation of release mechanisms for doors FSH/12/4 BS 7386:1997 Specification for draughtstrips for the draught control of existing doors and windows in housing (including test methods) B/540/2 Help Us to Help You! Always quote your Customer Number Don t know your number? Contact Customer Services who will be happy to check it for you BS 7664:2000 Specification for undercoat and finishing paints STI/28 BS 7719:1994 Specification for water-borne emulsion paints for interior use STI/28 BS 7880:1997 Code of practice for draught control of existing doors and windows in housing using draughtstrips B/540/2 BS :2006 Methods for measuring the skid resistance of pavement surfaces. Sideway-force coefficient routine investigation machine B/510/5 BS :2000 Methods for measuring the skid resistance of pavement surfaces. Test method for measurement of surface skid resistance using the GripTester braked wheel fixed slip device B/510/5 BS :1990 Workmanship on building sites. Code of practice for carpentry, joinery and general fixings B/543 BS :1989 Workmanship on building sites. Code of practice for above ground drainage and sanitary appliances B/505 BS :1989 Workmanship on building sites. Code of practice for below ground drainage B/505 BS 8219:2001 Installation of sheet roof and wall coverings. Profiled fibre cement. Code of practice B/542/4 PD :2006 Project management. Guide to project management in the construction industry MS/2 PD 6680:2002 Guidance on the new European Standards for thermal insulation materials B/540 PD 0020:2002 A Guide to computer-based management systems JTISC/- Addendum to TickIT Guide Issue 4.0 The dynamic systems development method and TickIT JTISC/- BRITISH STANDARDS REVIEWED AND CONFIRMED It is BSI policy for every standard to be reviewed by the technical committee responsible not more than five years after publication, to establish whether it is still current and, if it is not, to identify and set in hand appropriate action. Confirmation indicates the continuing currency of a standard. Where any standard in this list has been amended since publication, confirmation includes all amendments published to date. Reference to a particular amendment indicates that it is published concurrently with the confirmation. BS 67:1987 Specification for ceiling roses CPL/34/2 BS 143 and 1256:2000 Threaded pipe fittings in malleable cast iron and cast copper alloy ISE/110 BS 405:1987 Specification for uncoated expanded metal carbon steel sheets for general purposes ISE/104 BS 749:1969 Specification for underfeed stokers RHE/22 BS 807:1955 Specification for spot welding electrodes WEE/29 BS 857:1967 Specification for safety glass for land transport AUE/10 BS 946:1970 Method for the designation of yarns TCI/24 BS 950-1:1967 Specification for artificial daylight for the assessment of colour. Illuminant for colour matching and colour appraisal CPL/34 BS :1973 Methods for analysis and testing of coal and coke. Total moisture of coal PTI/16 BS :1977 Methods for analysis and testing of coal and coke. Phosphorus in coal and coke PTI/16 BS :1963 Methods for analysis and testing of coal and coke. Analysis of coal ash and coke ash PTI/16 24 Update Standards November 2012 Prices may be subject to change.

25 BS :1994 Methods for analysis and testing of coal and coke. General introduction and methods for reporting results PTI/16 BS :1993 Methods for analysis and testing of coal and coke. Ultimate analysis of coal and coke. Determination of total sulfur content. Eschka method PTI/16 BS :1991 Methods for analysis and testing of coal and coke. Caking and swelling properties of coal. Assessment of caking power by Gray-King coke test PTI/16 BS :1992 Methods for analysis and testing of coal and coke. Tests special to coke. Determination of density and porosity PTI/16 BS 1140:1993 Specification for resistance spot welding of uncoated and coated low carbon steel WEE/29 BS 1161:1977 Specification for aluminium alloy sections for structural purposes B/525/9 BS 1446:1973 Specification for mastic asphalt (natural rock asphalt fine aggregate) for roads and footways B/510 BS 1591:1975 Specification for corrosion resisting high silicon iron castings ISE/111 BS 1600:1991 Specification for dimensions of steel pipe for the petroleum industry ISE/110 BS 1692:1998 Specification for gin blocks MHE/3/6 BS :1989 Fabrics for uniforms and workwear. Specification for fabrics of wool and wool blends TCI/66 BS :1990 Fabrics for uniforms and workwear. Specification for fabrics from cellulosic fibres, synthetic fibres and blends TCI/66 BS :1974 Domestic bedding. Pillows and bolsters for domestic use (excluding cellular rubber pillows and bolsters) TCI/66 BS :1992 Hot-applied joint sealant systems for concrete pavements. Code of practice for the application and use of joint sealants B/510 BS :1993 Hot-applied joint sealant systems for concrete pavements. Methods of test B/510 BS 2610:1978 Method of test for the determination of the cuprammonium fluidity of cotton and certain cellulosic man-made fibres TCI/80 BS :1974 Methods of testing water used in industry. Free EDTA, total salts of EDTA, polyacrylate and polymethacrylate EH/3 BS :1979 Methods of testing water used in industry. Hydrazine: spectrophotometric method (4- dimethylaminobenzaldehyde) EH/3 BS :1983 Methods of testing water used in industry. Silica: reactive, total and suspended EH/3 BS :1983 Methods of testing water used in industry. Cyclohexylamine: spectrophotometric method EH/3 BS :1983 Methods of testing water used in industry. Morpholine: spectrophotometric method EH/3 BS :1983 Methods of testing water used in industry. Long-chain fatty amines: spectrophotometric method EH/3 BS :1987 Colliery haulage and winding equipment. Specification for 1.5% manganese steel castings ISE/111 BS :Method 641A:1983 Methods of testing plastics. Dimensional properties. Determination of dimensional stability at 100ºC of flexible polyvinyl chloride sheet PRI/75 BS 2955:1993 Glossary of terms relating to particle technology LBI/37 BS :1958 Specification for tyres for crane rail wheels. Double-flanged parallel-tread tyres MHE/3/1 BS :1975 Specification for tyres for crane rail wheels. Forged or rolled steel double flanged rail wheels and tyres (metric units) MHE/3/1 BS 3083:1988 Specification for hot-dip zinc coated and hotdip aluminium/zinc coated corrugated steel sheets for general purposes ISE/109 BS 3090:1978 Method of test for the determination of the cuprammonium fluidity of linen materials TCI/80 BS :1990 Specification for manufactured solid smokeless fuels for household use. Cokes for domestic openable and closed appliances and open fires with fan-assisted primary air RHE/28 BS :1970 Specification for manufactured solid smokeless fuels for household use. Specially reactive fuels for all types of domestic open fire RHE/28 BS 3173:1996 Specification for spring units for mattresses FW/0/2 BS :1989 Hot-applied thermoplastic road marking materials. Specification for application of material to road surfaces B/509 BS 3376:1994 Specification for open fires burning solid mineral fuels with convection, with or without boilers RHE/28 BS :1986 Methods for determination of particle size distribution. Guide to powder sampling LBI/37 BS :1993 Methods for determination of particle size distribution. Guide to microscope and image analysis methods LBI/37 BS 3507:1976 Specification. Orthodontic wire and tape and dental ligature wire CH/106/2 BS 3520:1962 Specification for dental wrought precious metal alloy wire CH/106/2 BS :1991 Terms relating to ophthalmic lenses and spectacle frames. Glossary of terms relating to spectacle frames CH/172 Update Standards November 2012 Prices may be subject to change. 25

26 British Standards Confirmed continued... BS :1990 Implants for osteosynthesis. Bone screws and auxiliary equipment. Specification for taps and drills CH/150/5 BS :1990 Implants for osteosynthesis. Skeletal pins and wires. Specification for general requirements CH/150/5 BS :1990 Implants for osteosynthesis. Intramedullary nailing systems. Specification for medullary pins (Rush type) and introducer/extractors CH/150/5 BS 3553:1992 Specification for graphical symbols for coal preparation plant flowsheets PTI/16 BS 3568:1988 Method for determination of solubility of wool in alkali TCI/80 BS 3584:1989 Determination of solubility of wool in ureabisulphite solution TCI/80 BS 3625:1963 Specification for eyepiece and screen graticules for the determination of the particle size of powders LBI/37 BS 3666:1982 Specification for size designation of women s wear TCI/66 BS C:1996 Measurement of liquid flow in open channels. Sediment transport. Guide to methods of sampling of sand-bed and cohesive-bed materials CPI/113 BS 3799:1974 Specification for steel pipe fittings, screwed and socket-welding for the petroleum industry ISE/110 BS 3838:1980 Specification for blazer fabrics TCI/66 BS :1994 Determination of smoke emission from manufactured solid fuels for domestic use. General method for determination of smoke emission rate RHE/28/2 BS :1994 Determination of smoke emission from manufactured solid fuels for domestic use. Methods for measuring the smoke emission rate RHE/28/2 BS 3866:1979 Specification for holes and shanks for buttons TCI/66 BS 3886:1965 Specification for dental impression compound CH/106/2 BS :1982 Thermal insulating materials. Magnesia preformed insulation B/540 BS :1982 Thermal insulating materials. Calcium silicate preformed insulation B/540 BS :1985 Thermal insulating materials. Metal mesh faced man-made mineral fibre mattresses B/540 BS :1982 Thermal insulating materials. Bonded preformed man-made mineral fibre pipe sections B/540 BS :1986 Thermal insulating materials. Specification for bonded man-made mineral fibre slabs B/540 BS :1972 Thermal insulating materials. Finishing materials; hard setting composition, self-setting cement and gypsum plaster B/540 BS :1980 Methods of test for finishes for wooden furniture. Assessment of low angle glare by measurement of specular gloss at 85º FW/0/1 BS :1980 Methods of test for finishes for wooden furniture. Assessment of surface resistance to cold oils and fats FW/0/1 BS :1980 Methods of test for finishes for wooden furniture. Assessment of resistance to mechanical damage FW/0/1 BS 3987:1991 Specification for anodic oxidation coatings on wrought aluminium for external architectural applications STI/32 BS 4032:1978 Method of test for the determination of certain water- or alkali-soluble additives in cellulosic or synthetic fibres, yarns and fabrics or yarns and fabrics made from blends of such fibres TCI/80 BS 4119:1967 Method of measurement of current noise generated in fixed resistors EPL/40X BS 4129:1990 Specification for welding primers and weldthrough sealants, adhesives and waxes for resistance welding of sheet steel WEE/29 BS 4204:1989 Specification for flash welding of steel tubes for pressure applications WEE/29 BS :1987 Resistance spot welding electrodes, electrode holders and ancillary equipment. Specification for straight resistance spot welding electrodes WEE/29 BS :1987 Resistance spot welding electrodes, electrode holders and ancillary equipment. Specification for electrode adaptors, female taper 1:10 WEE/29 BS :1987 Resistance spot welding electrodes, electrode holders and ancillary equipment. Specification for male electrode caps WEE/29 BS :1990 Resistance spot welding electrodes, electrode holders and ancillary equipment. Specification for insulated pins for use in electrode back-ups WEE/29 BS 4222:1967 Specification for dimensions of the transmission coupling (slip-joint) to dental handpieces CH/106/4 BS 4284:1981 Specification for dental impression pastes (zinc oxide type) CH/106/2 BS :1982 Determination of the specific surface area of powders. Recommended air permeability methods LBI/37 BS :1995 Determination of the specific surface area of powders. Recommendations for methods of determination of metal surface area using gas adsorption techniques LBI/37 BS :1968 Woodworking machines. Components MTE/23 BS :1972 Specification for woodworking machines. Machine sizes and capacities MTE/23 26 Update Standards November 2012 Prices may be subject to change.

27 BS 4486:1980 Specification for hot rolled and hot rolled and processed high tensile alloy steel bars for the prestressing of concrete ISE/104 BS :1986 Thermally insulated underground pipelines. Specification for steel cased systems with air gap B/540 BS :1977 Thermally insulated underground pipelines. Specific testing and inspection requirements for cased systems without air gap B/540 BS :1998 Specification for 600/1000 V single-phase split concentric electric cables. Cables having PVC insulation GEL/20/17 BS :1998 Specification for 600/1000 V single-phase split concentric electric cables. Cables having thermosetting insulation and low emission of smoke and corrosive gases when affected by fire GEL/20/17 BS 4655:1986 Method for determination of pile loss of cutpile and non-loop pile upholstery fabrics TCI/66 BS :1973 Cable trunking. Steel underfloor (duct) trunking PEL/213 BS :1982 Cable trunking. Specification for cable trunking made of insulating material PEL/213 BS :Group 01:1985 Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to electromedical equipment. Radiology and radiological physics terminology CH/210/3 BS :1989 Resistance welding water-cooled transformers of the press-package and portable types. Specification for portable transformers WEE/29 BS 4834:1990 Specification for inset open fires without convection with or without boilers, burning solid mineral fuels RHE/28 BS :1985 Rigid polyurethane (PUR) foam in slab form. Specification for PUR foam for use in transport containers and insulated vehicle bodies PRI/72 BS :1994 Rigid polyurethane (PUR) foam in slab form. Specification for PUR foam for use in refrigerator cabinets, cold rooms and stores PRI/72 BS 4868:1972 Specification for profiled aluminium sheet for building B/525/9 BS 4904:1978 Specification for external cladding colours for building purposes B/542 BS 4948:1994 Method for assessment of the visible soiling by body contact of upholstery fabrics TCI/66/2 BS :1973 Interlinings. Nonwoven sew-in interlinings TCI/66 BS :1973 Interlinings. Nonwoven fusible interlinings TCI/66 BS :1976 Interlinings. Woven and knitted fusible interlinings TCI/66 BS :1990 Interlinings. Specification for woven sew-in interlinings TCI/66 BS :1975 Dental casting investments. Ethyl silicatebonded investment materials CH/106/2 BS :1993 Guide to production control. Introduction MS/3 BS :1993 Guide to production control. Production programming MS/3 BS :1993 Guide to production control. Ordering methods MS/3 BS :1993 Guide to production control. Dispatching (shopfloor control) MS/3 BS :1993 Guide to production control. The relationship between production control and other management functions MS/3 BS :1993 Guide to production control. Computer aided production control MS/3 BS :1990 Cold applied joint sealant systems for concrete pavements. Specification for joint sealants B/510 BS :1990 Cold applied joint sealant systems for concrete pavements. Code of practice for the application and use of joint sealants B/510 BS :1990 Cold applied joint sealant systems for concrete pavements. Methods of test B/510 BS :1976 Specification for hospital bedding. Flexible polyurethane pillows TCI/66 BS :1991 Rigid polyurethane (PUR) and polyisocyanurate (PIR) foam when dispensed or sprayed on a construction site. Specification for dispensed foam for thermal insulation or buoyancy applications PRI/72 BS 5245:1975 Specification for phosphoric acid based flux for soft soldered joints in stainless steel ISE/110 BS :1989 Safety of domestic gas appliances. Specification for combined appliances: fanned-circulation ducted-air heaters/circulators GSE/20 BS 5273:1975 Specification. Dense tar surfacing for roads and other paved areas B/510 BS 5426:1993 Specification for workwear and career wear TCI/66 BS 5441:1988 Methods of test for knitted fabrics TCI/24 To order visit Update Standards November 2012 Prices may be subject to change. 27

28 British Standards Confirmed continued... BS :1978 (ISO 3647:1976) Cinematography. 16 mm film. Spindles. Specification for dimensions of spindles for 16 mm motion-picture camera and projector spools CPW/36 BS :1987 (ISO 7831:1986) Cinematography. 35 mm film. Sound. Specification for reproduction characteristics of the A-chain frequency response for 35 mm photographic sound CPW/36 BS :1987 (ISO 162:1985) Cinematography. Common to more than one film gauge. Sound. Specification for positions and width dimensions of recording and reproducing head gaps for three-, four- or sixtrack magnetic sound records on 35 mm and single-track on 17.5 mm motion-picture film containing no picture CPW/36 BS :1979 Powder metallurgical materials and products. General information. Introduction and contents ISE/65 BS 5612:1978 Specification for dental porcelains for jacket crowns CH/106/2 BS 5617:1985 Specification for urea-formaldehyde (UF) foam systems suitable for thermal insulation of cavity walls with masonry or concrete inner and outer leaves PRI/72 BS 5618:1985 Code of practice for thermal insulation of cavity walls (with masonry or concrete inner and outer leaves) by filling with urea-formaldehyde (UF) foam systems PRI/72 BS :1985 Thermal insulation for use in pitched roof spaces in dwellings. Specification for installation of man-made mineral fibre and cellulose fibre insulation B/540 BS :1988 Sheets, sheeting, pillowslips, towels, napkins, counterpanes and continental quilt secondary covers suitable for use in the public sector. Specification for towels and napkins TCI/66 BS :1991 Sheets, sheeting, pillowslips, towels, napkins, counterpanes and continental quilt secondary covers suitable for use in the public sector. Specification for counterpanes and continental quilt secondary covers including flammability performance TCI/66 BS :1990 Blankets suitable for use in the public sector. Specification for wool and wool/polyamide blankets TCI/66 BS :1991 Blankets suitable for use in the public sector. Specification for cotton leno cellular blankets TCI/66 BS :1991 Blankets suitable for use in the public sector. Specification for synthetic fibre cellular blankets TCI/66 BS :1991 Blankets suitable for use in the public sector. Specification for flammability performance TCI/66 BS :1998 Educational furniture. Specification for strength and stability of storage furniture for educational institutions FW/0/4 BS :1998 Educational furniture. Specification for security of fixed secure storage furniture for educational institutions FW/0/4 BS 5972:1980 Specification for photoelectric control units for road lighting CPL/34/4/1 BS :1991 Characterization of air quality. Stationary source emissions. Method for the determination of asbestos plant emissions by fibre count measurement EH/2/1 BS :1987 (ISO 8488:1986) Cycles. Specification for screw threads used to assemble head fittings on bicycle forks GME/25 BS 6144:1990 Specification for expansion vessels using an internal diaphragm, for unvented hot water supply systems RHE/7 BS :1991 Methods of test for anodic oxidation coatings on aluminium and its alloys. Determination of surface abrasion resistance STI/32 BS 6185:1982 Specification for size designation of men s wear TCI/66 BS 6189:1989 Glossary of terms relating to fabrics and associated fibres, yarns and processes TCI/66 BS 6261:1982 Method for evaluating the application of and interaction between components in upholstered furniture FW/0/1 BS :1991 Care and maintenance of floor surfaces. Code of practice for resilient sheet and tile flooring TCI/66 BS :1983 Terms relating to surgical implants. Glossary of general medical terms CH/150 BS :1983 Terms relating to surgical implants. Glossary of terms relating to materials CH/150 BS :1983 Terms relating to surgical implants. Glossary of orthopaedic surgical terms CH/150 BS :1990 Thermal performance of domestic gas appliances. Specification for thermal performance of combined appliances: fannedcirculation ducted-air heater/circulator GSE/20 BS 6395:1983 Method for numerical designation of fabric faults by visual inspection TCI/66 BS 6476:1984 Guide to garment quality and relevant British Standards TCI/66 BS 6515:1984 Specification for polyethylene damp-proof courses for masonry B/546 BS 6524:1984 Method for determination of the surface resistivity of a textile fabric TCI/24 BS 6543:1985 Guide to use of industrial by-products and waste materials in building and civil engineering B/510 BS :1989 Vehicle parking control equipment. Specification for coin operated clockwork parking meters B/509 BS :1989 Vehicle parking control equipment. Specification for electrically powered parking meters B/ Update Standards November 2012 Prices may be subject to change.

29 BS :1989 Vehicle parking control equipment. Specification for barrier type parking control equipment B/509 BS :1996 Vehicle parking control equipment. Specification for pay-on-foot parking control equipment B/509/20 BS :1997 Vehicle parking control equipment. Specification for parking discs B/509/20 BS :1997 Vehicle parking control equipment. Specification for pre-purchased parking vouchers B/509/20 BS :1988 Safety fences and barriers for highways. Specification for components for tensioned corrugated beam safety fence on Z posts B/509 BS :1988 Safety fences and barriers for highways. Specification for components for tensioned rectangular hollow section beam (100 mm x 100 mm) safety fence B/509 BS :1990 Safety fences and barriers for highways. Specification for components for tensioned rectangular hollow section beam (200 mm x 100 mm) safety fence B/509 BS :1986 Safety fences and barriers for highways. Specification for open box beam safety fence (single height) B/509 BS :1988 Safety fences and barriers for highways. Specification for components for open box beam safety fence (double height) B/509 BS :1989 Safety fences and barriers for highways. Specification for components for untensioned corrugated beam safety fence B/509 BS :1987 Safety fences and barriers for highways. Specification for concrete safety barriers B/509 BS 6645:1985 Method for determination of alkali solubility of flax materials TCI/80 BS 6646:1985 Method for determination of ash of textiles TCI/80 BS 6648:1986 Methods for wet ashing of textile materials for subsequent determination of metal content TCI/80 BS 6663:1986 Methods for determination of crimp rigidity of textured nylon yarns TCI/24 BS 6722:1986 Recommendations for dimensions of metallic materials ISE/NFE/3 BS 6747:1987 Specification for orthodontic resins CH/106/2 BS 6793:1987 Specification for men s uniform shirts TCI/66 BS 6909:1988 Method for generation and counting of the airborne linting propensity of fabrics in the dry state TCI/24 BS :2000 Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water. Odour and flavour of water. Method of testing odours and flavours imparted to water by hoses and composite pipes and tubes EH/6 BS :2000 Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of water. Methods of test. Odour and flavour of water. Method of testing tastes imparted to water by hoses for conveying water for food and drink preparation EH/6 BS :2000 Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of water. Methods of test. The extraction of substances that may be of concern to public health EH/6 BS :2000 Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of water. Methods of test. The extraction of metals EH/6 BS :2000 Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water. High temperature tests EH/6 BS :2001 Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water. Method for the GCMS identification of water leachable organic substances EH/3 BS 6944:1988 Specification for flash welding of butt joints in ferrous metals (excluding pressure piping applications) WEE/29 BS 6981:1988 Method for determination of acid content of wool TCI/80 BS 7021:1989 Code of practice for thermal insulation of roofs externally by means of sprayed rigid polyurethane (PUR) or polyisocyanurate (PIR) foam PRI/72 BS 7022:1988 Guide for geophysical logging of boreholes for hydrogeological purposes CPI/113 BS :1989 Application, selection and installation of expansion vessels and ancillary equipment for sealed water systems. Code of practice for domestic heating and hot water supply RHE/7 BS :1989 Application, selection and installation of expansion vessels and ancillary equipment for sealed water systems. Code of practice for low and medium temperature hot water heating systems RHE/7 BS :1989 Application, selection and installation of expansion vessels and ancillary equipment for sealed water systems. Code of practice for chilled and condenser systems RHE/7 BS :1998 Code of practice for safe use of cranes. Offshore cranes MHE/3/11 BS :1999 Code of practice for safe use of cranes. Recovery vehicles and equipment. Code of practice MHE/3/11 Update Standards November 2012 Prices may be subject to change. 29

30 British Standards Confirmed continued... BS 7209:1990 Specification for water vapour permeable apparel fabrics TCI/66 BS :1990 Orthopaedic implants. Recommendations for care and handling CH/150/5 BS :1990 Orthopaedic implants. Recommendations for retrieval and examination of implants and associated tissues CH/150/5 BS 7262:1990 Specification for automatic safe load indicators MHE/3/11 BS :1990 Analysis of sodium chloride for industrial use. Method for determination of cadmium content CII/26 BS :1990 Analysis of sodium chloride for industrial use. Method for determination of copper content CII/26 BS :1990 Analysis of sodium chloride for industrial use. Method for determination of lead content CII/26 BS :1990 Analysis of sodium chloride for industrial use. Method for determination of mercury content CII/26 BS :1990 Analysis of sodium chloride for industrial use. Method for determination of ph and total alkalinity CII/26 BS :1990 Analysis of sodium chloride for industrial use. Method for determination of iron content CII/26 BS 7351:1990 Specification for metal-sheathed heating elements for industrial use PEL/27 BS 7405:1991 Guide to selection and application of flowmeters for the measurement of fluid flow in closed conduits CPI/30 BS :1991 Rubber or plastics covered rollers. Introduction PRI/73 BS 7456:1991 Code of practice for stabilization and thermal insulation of cavity walls (with masonry or concrete inner and outer leaves) by filling with polyurethane (PUR) foam systems PRI/72 BS :1992 Methods for froth flotation testing of hard coal. Laboratory procedure PTI/16 BS :1992 Porosity and pore size distribution of materials. Method of evaluation by mercury porosimetry LBI/37 BS :1993 Porosity and pore size distribution of materials. Method of evaluation by liquid expulsion LBI/37 BS 7649:1993 Guide to the design and preparation of documentation for users of application software IST/15 BS 7660:1993 Specification for safety pins for general use TCI/66 BS :1994 Vehicle restraint systems. Guide to the installation, inspection and repair of safety fences B/509 BS 7727:1994 Code of practice for installation and inspection of pre-insulated compression terminals and connectors for cables with copper conductors up to 6 mm 2 GEL/20/11 BS :1994 Specification for information systems products using SSADM (Structured Systems Analysis and Design Method). Implementation of SSADM version 4 IST/15 BS 7754:1994 Code of practice for garment evaluation by wearer trials TCI/24 BS :2001 LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables of rated voltage 0.6/1 kv. PVC insulated combined neutral and earth copper wire concentric cables with copper or aluminium conductors GEL/20/16 BS :2001 LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables of rated voltage 0.6/1 kv. PVC insulated split concentric cables with copper or aluminium conductors GEL/20/16 BS 7873:1996 Code of practice for application and testing of hot enamel external and/or internal coating of iron and steel pipes ISE/110 BS 7895:1997 Specification for bayonet lampholders with enhanced safety CPL/34/2 BS 7901:2002 Specification for recovery vehicles and vehicle recovery equipment MHE/3/14 BS :1999 Visual imperfections in rubber products. Vocabulary PRI/73 BS 7952:2001 Specification for chemical firelighters in solid form used for the ignition of solid fuels in residential heating and cooking appliances RHE/28 BS 9133 N001 to 003:1975 Detail specification for single turn low power non-wirewound rotary potentiometers. Spindle insulated from resistance element, spindle and panel sealed or container, spindle and panel sealed. Full assessment level EPL/40X BS ISO 1039:1995 Cinematography. Cores for motion-picture and magnetic film rolls. Dimensions CPW/36 BS ISO 3023:1995 Cinematography. 65 mm and 70 mm unexposed motion-picture film. Cutting and perforating dimensions CPW/36 BS ISO 3639:1981 Cinematography. Projection reels/spools 75 to 312 mm diameter for 8 mm Type S motionpicture film. Dimensions and specifications CPW/36 BS ISO 4241:2001 Cinematography. Theatre projection leader, trailer and cue marks. Specifications CPW/36 30 Update Standards November 2012 Prices may be subject to change.

31 BS ISO 6025:2000 Cinematography. Analogue photographic sound test films, 35 mm and 16mm. Specifications CPW/36 BS ISO 6036:1996 Cinematography. Colour motion-picture prints and slides for television. Density specifications CPW/36 BS ISO 8395:1995 Cinematography. Test films for the reproduction of 70 mm motion-picture release prints with magnetic stripes. Specifications CPW/36 BS ISO 12608:1996 Cinematography. Room and surround conditions for evaluating television display from telecine reproduction CPW/36 BS ISO 17332:2001 Cinematography. Manufacturer printed latent image identification information for 35mm motion-picture colour-print film. Specifications CPW/36 BS ISO :2008 Digital cinema (D-cinema) distribution master. Image characteristics CPW/36 BS ISO :2008 Digital cinema (D-cinema) distribution master. Audio characteristics CPW/36 BS ISO :2008 Digital cinema (D-cinema) distribution master. Audio channel mapping and channel labeling CPW/36 BS ISO :2008 Digital cinema (D-cinema) packaging. Sound and picture track file CPW/36 BS ISO :2008 Digital cinema (D-cinema) packaging. MXF JPEG 2000 application CPW/36 BS ISO :2008 Digital cinema (D-cinema) packaging. MXF track file essence encryption CPW/36 BS ISO :2008 Digital cinema (D-cinema) packaging. Composition playlist CPW/36 BS ISO :2008 Digital cinema (D-cinema) operations. Key delivery message CPW/36 BS ISO :2008 Digital cinema (D-cinema) operations. Digital certificate CPW/36 BS ISO :2008 Digital cinema (D-cinema) operations. Generic extra-theatre message format CPW/36 BS ISO :2008 Digital cinema (D-cinema) quality. Screen luminance level, chromaticity and uniformity CPW/36 BS ISO :2008 Digital source processing. Digital cinema (Dcinema) low frequency effects (LFE) channel audio characteristics CPW/36 PD 6434:1969 Recommendations for the design and testing of smoke reducing solid fuel burning domestic appliances RHE/28/2 PD 6527:1990 Methods of test for textiles (other than those methods already published as British Standards) TCI/24 PD :1993 Variability of methods of test for textiles and reports of interlaboratory trials on certain methods. Phase 1: BS 2576, BS 4303 and ISO 9290 TCI/24 PD :1994 Variability of methods of test for textiles and reports of inter-laboratory trials on certain methods. Phase 2: BS 3320, BS 2010 and BS 1932 TCI/24 PD 6577:1995 The influence of environmental conditions on the testing of textile materials TCI/24 PD 6677:2002 Implementation guide for NATO AQAP-160 incorporating all AQAP-160 text and relevant ISO text IST/15 BS 3A 103:1962 Specification for steel nuts (Unified hexagons and Unified threads) (ordinary, thin, slotted and castle) for aircraft BS 3A 105:1962 Specification for corrosion-resisting steel nuts (Unified hexagons and Unified threads) (ordinary, thin, slotted and castle) for aircraft BS 3A 107:1962 Specification for aluminium alloy nuts (Unified hexagons and Unified threads) (ordinary and slotted) for aircraft BS 4A 169:2002 Specification for aluminium alloy bolts (Unified hexagons and Unified threads) for aircraft BS 2A 175:1962 Specification for 100º countersunk head aluminium alloy bolts (Unified threads) for aircraft BS A 226:1965 Specification for steel hexagon head bolts (short thread: Class 3A) BS A 227:1965 Specification for steel pan head bolts (short thread: Class 3A) BS 4A 228:1997 Specification for steel double hexagon bolts MPa (180,000 lbf/in 2 ) for aircraft BS 2A 229:1972 Specification for hexagonal head steel bolts lbf/in 2 (1100/MPa) BS 2A 230:1974 Specification for 100º countersunk head steel bolts [1100 MPa with Hi-torque speed drive recesses] BS A :1971 Specification for plain hexagonal nut (of Class 3B UNJ thread) BS A 242; A 243; A 244; A 245:1974 Specification for hexagonal castle nuts (of Class 3B UNJ thread) BS A 246; A 247; A 248; A 249:1974 Specification for slotted hexagonal thick nuts (of Class 3B UNJ thread) BS A 250; A 251; A 252; A 253:1974 Specification for slotted hexagonal shear nuts (of Class 3B UNJ thread) BS 2C 13:1988 Specification for sizes of aircraft gravity filling orifices and associated replenishment nozzles (metric series) Update Standards November 2012 Prices may be subject to change. 31

32 British Standards Confirmed continued... BS C 17:1973 Specification for coupling dimensions for low pressure air connections for engine starting BS 3F 63:1981 Specification for low pressure oxygen hose for aeronautical purposes ACE/65 BS 3F 65:1991 Specification for flexible corrugated oxygen and air tubes for aircraft (natural or synthetic polyisoprene) ACE/65 BS 2F 66:1982 Specification for rubber bonded cork sheets ACE/65 BS 2F 67:1980 Specification for hose for aviation fuel and engine lubricating oil for aeronautical purposes ACE/65 BS 4F 68:2002 Controlled storage of vulcanized rubbers for use in aerospace applications ACE/65 BS 3F 69:1979 Specification for packaging and identification of vulcanized rubber items ACE/65 BS 4F 111:2002 Flax harness webbing for aerospace purposes ACE/65 BS 3F 114:1995 Specification for 80 g/m 2 cotton madapolam fabric ACE/65 BS 3F 116:1995 Specification for mercerized cotton fabric ACE/65 BS 5F 118: g/m 2 nylon parachute fabric ACE/65 BS 4F 119: g/m 2 to 235 g/m 2 nylon parachute fabric ACE/65 BS 3F 126: g/m 2 nylon parachute fabric ACE/65 BS F 137:1989 Specification for warp knitted cotton polishing and polish application cloths for aircraft transparencies ACE/65 BS F 138:1991 Specification for polyester plain (bobbin) netting suitable for aerospace purposes ACE/65 BS F 140:1991 Glossary of parachute terms ACE/65 BS 4G 198-3:1999 Sleeves and moulded components for aircraft electric cables and equipment wires. Specification for heat-shrinkable sleeving for binding, insulation, and identification ACE/6/-/8 BS G 203:1967 Specification for Unified screws with captive facing and locking washers BS 3G 230:2000 Specification for general requirements for aircraft electrical cables (second series) ACE/6/-/2 BS 4J 10:1991 Specification for pressure-sensitive adhesive water resistant PVC tape ACE/65 BS 4J 11:1991 Specification for pressure-sensitive adhesive paper masking tape ACE/65 BS 2L 169:2002 Ingots (as cast) and castings (solution treated and artificially aged) of aluminium-siliconmagnesium alloy (Si 7, Mg 0.6) ACE/61/-/24 BS M 32:1969 Specification for dimensions of aircraft accessory drives and mounting pads BS T 76:1978 Specification for chromium-molybdenum steel tube (770 MPa) (weldable) BS T 77:1980 Specification for chromium-molybdenum steel tube (900 MPa) (weldable) BS 2W 11:1967 Specification for aircraft material. Preformed corrosion-resisting steel wire rope BS 2W 12:1989 Specification for preformed zinc coated carbon steel wire rope (metric and inch series) BS 2X 26:2001 Doping and finishing schemes for fabric covered aircraft ACE/65 BS HC 502:1981 Specification for copper base aluminium-nickeliron alloy castings (620 MPa) (Al 9.5, Ni 5, Fe 5) ACE/61/-/16 BS MA 41:1975 Specification for two tonne general purpose davits MHE/3/3 BS MA 81:1980 Specification for ships derrick fittings MHE/3/3 BS 2SP 95:1974 Specification for elastomeric grommets (polychloroprene) for aerospace use BS SP :1971 Specification for corrosion resisting worm drive clamps for aircraft BS 2SP :1979 Specification for Unified aluminium alloy washers BS 2SP :1979 Specification for Unified alloy steel washers BS 2SP :1979 Specification for Unified corrosion-resistant steel washers BS 2SP :1973 Specification for solid rivets with universal head made from BS L 86 (SP 157 and 163), BS L 58 (SP 160 and 161), BS L 37 (SP 162) and DTD 204 (SP 158 and 159) materials BS 3SP :2002 Ferrules and assembly wires for braided rubber cord assemblies for aerospace use ACE/65 BS 3SP :2002 Braided rubber cord assemblies for aerospace use ACE/65 BS AU 251:1994 Specification for performance of automotive laminated windscreen repair systems AUE/10 32 Update Standards November 2012 Prices may be subject to change.

33 CP 143-5:1964 Code of practice for sheet roof and wall coverings. Zinc B/542/5 CP :1973 Code of practice for sheet roof and wall coverings. Galvanized corrugated steel. Metric units B/542/5 CP :1970 Code of practice for sheet roof and wall coverings. Copper. Metric units B/542/5 CP :1973 Code of practice for sheet roof and wall coverings. Aluminium. Metric units B/542/5 CP 3000:1955 Code of practice on the installation and maintenance of underfeed stokers RHE/22 BRITISH STANDARDS PROPOSED FOR WITHDRAWAL A note of any objections to these withdrawals should be sent to Debbie Stead, Head of Committee Service Centre and International Secretariat, BSI Group, 389 Chiswick High Road, London W4 4AL or via to BSUKoperations.review@bsigroup.com by 31 December, Where any standard in this list has been amended since publication, a proposal to withdraw also includes all amendments published to date. BS :1964 Specification for fixing accessories for building purposes. Fixings for sheet, roof and wall coverings B/542/4 This standard is proposed for withdrawal as the products covered are now only in limited use BS 1894:1992 Specification for design and manufacture of electric boilers of welded construction PVE/2 This standard is proposed for withdrawal as it is partially superseded by BS EN :2001 BS 2790:1992 Specification for design and manufacture of shell boilers of welded construction PVE/2 This standard is proposed for withdrawal as it will be withdrawn upon publication of all parts of BS EN BS 2795:1981 Specification for dial test indicators (lever type) for linear measurement TDW/4/4 This standard is proposed for withdrawal as it is superseded by BS EN ISO 9493:2010 BS :1985 Stairs, ladders and walkways. Code of practice for the design of industrial type stairs, permanent ladders and walkways B/208 This standard is proposed for withdrawal as it is partially superseded by BS EN ISO :2001+A1:2010, BS EN ISO :2001+A1:2010, BS EN ISO :2001+A1:2010 and BS EN ISO :2004+A1:2010 BS 5493:1977 Code of practice for protective coating of iron and steel structures against corrosion B/209 This standard is proposed for withdrawal as it is partially superseded by BS EN ISO :1998, BS EN ISO :1998, BS EN ISO :1998, BS EN ISO :1998, BS EN ISO :2007, BS EN ISO :1998, BS EN ISO :1998, BS EN ISO :1998 and BS EN ISO 14713:1999 BS 6206:1981 Specification for impact performance requirements for flat safety glass and safety plastics for use in buildings B/520 This standard is proposed for withdrawal as it is partially superseded by BS EN 12600:2002 BS 6610:1996 Specification for Pozzolanic pulverized-fuel ash cement B/516/6 This standard is proposed for withdrawal. BS EN 14216:2004 for Very Low Heat Special cements does have a strength class of 22.5 (VLH IV A or B), thereby making BS 6610:1996 potentially in conflict with a CEN harmonised standard BS 8207:1985 Code of practice for energy efficiency in buildings B/540 This standard is proposed for withdrawal as it is no longer used BS :1988 Energy efficiency in housing. Code of practice for energy efficient refurbishment of housing B/540 This standard is proposed for withdrawal as it is no longer used PD 6513:1985 Magnetic particle flaw detection. A guide to the principles and practice of applying magnetic particle flaw detection in accordance with BS 6072 WEE/46 This standard is proposed for withdrawal. BS 6072:1981 is superseded by BS EN ISO :2001, BS EN ISO :2002 and BS EN ISO :2002 therefore PD 6513:1985 is no longer required BRITISH STANDARDS WITHDRAWN If any standard in this list has been amended since publication, all amendments published to date are also withdrawn BS 46-1:1958 Keys and keyways and taper pins. Specification. Keys and keyways MCE/5 BS 327:1964 Specification for power-driven derrick cranes MHE/3/3 BS 357:1958 Specification for power-driven travelling jib cranes (rail-mounted low carriage type) MHE/3/3 BS 690-6:1976 Asbestos-cement slates and sheets. Fittings for use with corrugated sheets B/542/6 BS 748:1982 Specification for haemacytometer and particle counting chambers CH/212 BS 916:1953 Specification for black bolts, screws and nuts, hexagon and square, with B.S.W. threads, and partly machined bolts, screws and nuts, hexagon and square, with B.S.W. or B.S.F. threads BS :1973 Specification for draw-off taps and stopvalves for water services (screw-down pattern). Drawoff taps and above-ground stopvalves B/504 BS 1101:1977 Specification for pressure containers for paint and other similar substances PVE/1 Update Standards November 2012 Prices may be subject to change. 33

34 British Standards Withdrawn continued... BS 1252:1991 Specification for domestic solid mineral fuelfired, free-standing cookers with or without boilers RHE/28 BS 1305:1974 Specification for batch type concrete mixers B/513 BS 1521:1972 Specification for waterproof building papers B/546 BS 1567:1953 Specification for wood door frames and linings B/538/2 BS 1717:1983 Specification for steel tubes for cycle and motor cycle purposes ISE/110 BS :1978 Fences. Chain link fences for tennis court surrounds B/201 BS 1761:1951 Specification for single bucket excavators of the crawler-mounted friction-driven type MHE/3 BS 2067:1953 Determination of power-factor and permittivity of insulating materials (Hartshorn & Ward method) PRI/22/-/5 BS 2484:1985 Specification for straight concrete and clayware cable covers B/524 BS 2580:1979 Specification for underground plug cocks for cold water services B/504 BS 2799:1974 Specification for power-driven tower cranes for building and engineering construction MHE/3/5 BS :1993 Methods for thermal testing of domestic solid mineral fuel burning appliances with convection. Flue loss method RHE/28 BS :1994 Methods for thermal testing of domestic solid mineral fuel burning appliances with convection. Hood method RHE/28 BS 3265:1960 Method for the determination of tar acids in black and white disinfectant fluids CH/216 BS 3274:1960 Specification for tubular heat exchangers for general purposes PVE/1 BS 3286:1960 Method for laboratory evaluation of disinfectant activity of quaternary ammonium compounds by suspension test procedure CH/216 BS 3377:1985 Specification for boilers for use with domestic solid mineral fuel appliances RHE/28 BS 3378:1986 Specification for roomheaters burning solid mineral fuels RHE/28 BS 3414:2000 Specification for hand-held crown bottle openers PKW/0/-/8 BS 3415:1986 Specification for venetian blinds B/538/3 BS 3457:1973 Specification for materials for water tap and stopvalve seat washers B/504 BS 3470:1975 Specification for field gates and posts B/201 BS 3550:1963 Specification for involute splines MCE/5 BS :1990 Bitumens for building and civil engineering. Specification for mixtures of bitumen with pitch, tar and Trinidad lake asphalt B/510 BS 3711:1964 Specification for railway vacuum brake cylinders, rolling ring type PVE/17 BS 3963:1974 Method for testing the mixing performance of concrete mixers B/513 BS 4016:1997 Specification for flexible building membranes (breather type) B/546 BS 4086:1966 Recommendations for maximum surface temperatures of heated domestic equipment CW/1 BS :1985 Corrugated plastics translucent sheets made from thermo-setting polyester resin (glass fibre reinforced). Specification for material and performance requirements B/542/6 34 Update Standards November 2012 Prices may be subject to change.

35 BS :1985 Corrugated plastics translucent sheets made from thermo-setting polyester resin (glass fibre reinforced). Specification for profiles and dimensions B/542/6 BS :1980 Extruded rigid PVC corrugated sheeting. Specification for performance requirements B/542/6 BS :1980 Extruded rigid PVC corrugated sheeting. Specification for profiles and dimensions B/542/6 BS :1968 Anaesthetic and analgesic machines. Anaesthetic machines of the on-demand type supplied with nitrous oxide and oxygen from separate containers CH/121/1 BS :1989 Anaesthetic and analgesic machines. Specification for continuous flow anaesthetic machines CH/121/1 BS :1994 Domestic solid mineral fuel fired boilers with rated output up to 45 kw. Specification for boilers with undergrate ash removal RHE/28 BS :1994 Domestic solid mineral fuel fired boilers with rated output up to 45 kw. Specification for gravity feed boilers designed to burn small anthracite RHE/28 BS 4624:1981 Methods of test for asbestos-cement building products B/542/6 BS :1992 Technical manuals. Specification for presentation of essential information GEL/3 Superseded by BS EN :2012 BS :1993 Technical manuals. Guide to content GEL/3 Superseded by BS EN :2012 BS :1993 Technical manuals. Guide to presentation GEL/3 Superseded by BS EN :2012 BS 5288:1976 Specification. Sealed radioactive sources NCE/2 Superseded by BS ISO 2919:2012 BS :1990 Fire extinguishing installations and equipment on premises. Specification for sprinkler systems FSH/18 BS :1978 Specification for nylon tubing. Plasticized and unplasticized nylon tubing types 11 and 12 for use primarily in the automobile industry PRI/66 BS 5624:1978 Code of practice for the lining of vessels and equipment for chemical processes: copper and copper alloys PVE/1 BS :1986 Electricity meters. Specification for single-phase coin operated prepayment flat rate and twopart tariff watt-hour meters of Class 2 and fixed charge collectors of Class 2 PEL/13 BS :1986 Electricity meters. Specification for meters having Class 1 electro-mechanical maximum demand indicators PEL/13 BS :1986 Electricity meters. Specification for Class 3 varhour meters PEL/13 BS 5694:1979 (IEC 60440:1973) Method for measurement of non-linearity in resistors EPL/40X Superseded by BS EN 60440:2012 BS :1985 Apparatus for connection to private circuits run by certain public telecommunication operators. Specification for apparatus for connection to speechband circuits TCT/2 BS :2000 Apparatus for connection to private circuits run by certain public telecommunication operators. Specification for apparatus for connection to digital circuits with interfaces according to CCITT G-series Recommendations. Section 8.1: G.703 services at 2 04 TCT/6 BS 6408:1983 Specification for clothing made from coated fabrics for protection against wet weather PH/3 BS 6480:1988 Specification for impregnated paper-insulated lead or lead alloy sheathed electric cables of rated voltages up to and including V GEL/20/16 BS 6523:1984 Specification for glass beakers for laboratory use LBI/36 Superseded by BS ISO 3819:1985 BS :1984 Apparatus with one or more particular functions for connection to public switched telephone networks run by certain public telecommunications operators. Specification for general requirements TCT/2 BS :1985 Apparatus with one or more particular functions for connection to the British Telecommunications public switched telephone network. Apparatus with auto-calling, autoanswering and auto-clearing facilities. Specification for auto-calling facilities TCT/2 Update Standards November 2012 Prices may be subject to change. 35

36 British Standards Withdrawn continued... BS :1987 Apparatus with one or more particular functions for connection to the British Telecommunications public switched telephone network. Apparatus with auto-calling, autoanswering and auto-clearing facilities. Specification for auto-answering and autoclearing facilities TCT/2 BS :1986 Apparatus with one or more particular functions for connection to certain public switched telephone networks. Specification for series connected apparatus. Apparatus having maximum allowable impairments TCT/2 BS :1989 Apparatus with one or more particular functions for connection to certain public switched telephone networks. Specification for series connected apparatus. Apparatus having less than maximum allowable impairments TCT/2 BS :1988 Apparatus with one or more particular functions for connection to public switched telephone networks run by certain public telecommunications operators. Specification for apparatus with call barring facilities TCT/2 BS :1987 Apparatus using cordless attachments (excluding cellular radio apparatus) for connection to analogue interfaces of public switched telephone networks. Specification for general requirements TCT/2 BS 7152:1991 Guide to choice of chemical disinfectants CH/216 BS 7244:1990 Specification for flame arresters for general use EXL/23 BS :1990 Non-metallic materials for surgical implants. Specification for surgical implants made of heat-vulcanized silicone elastomer CH/150/1 BS 7256:1990 Specification for roomheaters burning wood logs RHE/28 BS 7306:1995 Procedures for the operation of the UK scheme for the allocation of ISO DCC format OSI Network Layer addresses (including the operation of the associated UK Registration Authority) IST/6 BS 7320:1990 Specification for sharps containers CH/101 Superseded by BS EN ISO 23907:2012 BS :1991 Apparatus for connection to public telecommunications systems using the Digital Access Signalling System No. 2 (DASS 2) via a 2048 kbit/s CCITT Recommendation G.703 interface. Specification for automatic-repeat call attempt facilities TCT/6 BS :1998 Apparatus for connection to public telecommunications systems using the Digital Access Signalling System No. 2 (DASS 2) via a 2048 kbit/s CCITT Recommendation G.703 interface. Requirements for apparatus for connection to Channel Associated Signalling Systems (CASS) TCT/6 BS 7497:1992 Specification for rigid stretchers CH/239 BS :1992 Electronic transfer of geographic information (NTF). Specification for NTF structures IST/36 BS :1992 Electronic transfer of geographic information (NTF). Specification for implementing plain NTF IST/36 BS :1992 Electronic transfer of geographic information (NTF). Specification for implementing NTF using BS 6690 IST/36 BS :1998 Calibration of rubber and plastics test equipment. Calibration schedules. Rheological properties PRI/20 BS :1998 Calibration of rubber and plastics test equipment. Calibration schedules. Degradation and environmental properties PRI/20 BS :1998 Calibration of rubber and plastics test equipment. Calibration schedules. Flammability characteristics PRI/20 BS :1998 Calibration of rubber and plastics test equipment. Calibration schedules. Conditioning, sample and test piece preparation PRI/20 BS :1998 Calibration of rubber and plastics test equipment. Calibration schedules. Rubber polymer identification and chemical properties PRI/20 BS 7966:2000 Recommendations for design of cork removal devices PKW/0 BS :1987 Code of practice for pipelines. Pipelines on land: design, construction and installation Ductile iron PSE/17/2 BS :1991 General requirements for a system for electronic components of assessed quality. Specification of procedures for the approval of an organization EPL/40X 36 Update Standards November 2012 Prices may be subject to change.

37 BS :1971 Specification for fixed capacitors of assessed quality: generic data and methods of test. Polystyrene dielectric capacitors EPL/40X BS :1971 Specification for fixed capacitors of assessed quality: generic data and methods of test. Ceramic dielectric capacitors EPL/40X BS :1971 Specification for fixed capacitors of assessed quality: generic data and methods of test. Polycarbonate dielectric capacitors and polyethylene terephthalate dielectric capacitors for d.c. use and polypropylene dielectric capacitors for d.c. and a.c. use EPL/40X BS :1971 Specification for fixed capacitors of assessed quality: generic data and methods of test. Mica dielectric capacitors EPL/40X BS 9070 N002:1971 Detail specification for fixed metallized mica dielectric capacitors (style C2AED). Rectangular non-metallic case, centred wires on one face. General application category EPL/40X BS 9070 N003:1971 Detail specification for fixed metallized mica dielectric capacitors (style C2AEA). Rectangular non-metallic case, axial wires at both ends. General application category EPL/40X BS 9070:Sections 1 and 2:1969 Specification for fixed capacitors of assessed quality: generic data and methods of test. Principles and mandatory procedures. General rules for drafting detail specifications EPL/40X BS 9073 N0034:1978 Detail specification for fixed tantalum electrolytic capacitors. Porous anode, polar nonsolid electrolyte. Tubular insulated metallic case, PTFE/elastomer seal, axial wire terminations. Full plus additional assessment level EPL/40X BS 9074 N002:1974 Detail specification for fixed polystyrene foil dielectric capacitors. Tubular insulated case, axial terminations. Full asessment level EPL/40X BS 9074 N007:1981 Detail specification for polystyrene film dielectric capacitors, extended foil. Rectangular non-metallic case, unidirectional terminations. Full plus additional assessment level EPL/40X BS 9075 N023:1978 Detail specification for fixed monolithic ceramic dielectric capacitors (type 1B). Rectangular nonmetallic case, centred wires on one face. Full assessment level EPL/40X BS 9075 N024:1978 Detail specification for fixed monolithic ceramic dielectric capacitors (type 2C1). Rectangular non-metallic case, centred wires on one face. Full assessment level EPL/40X BS 9076 N001 to 004:1974 Detail specification for fixed metallized polyethylene terephthalate (PETP) film or metallized polycarbonate film dielectric capacitors. Rectangular non-metallic case axial or radial terminations, centrally spaced. Full assessment level EPL/40X BS 9093:1979 Rules for the preparation of detail specifications for variable pre-set capacitors, type C (full assessment level) EPL/40X BS 9130:1972 Specification for potentiometers of assessed quality: generic data and methods of test EPL/40X BS 9131 N001 to 016:1974 Detail specification for lead-screw actuated wirewound or non-wirewound preset potentiometers. Rectangular and square forms, container sealed, actuating device insulated from resistive element, slipping clutch at each end of travel. Full assessment level EPL/40X BS :2007 Business continuity management. Specification BCM/1/-/2 Superseded by BS ISO 22301:2012 DD 86-1:1983 Damp-proof courses. Methods of test for flexural bond strength and short term shear strength B/546 This standard is withdrawn as the DD status is no longer used DD 86-2:1984 Damp-proof courses. Method of test for creep deformation B/546 This standard is withdrawn as the DD status is no longer used DD 86-3:1990 Damp-proof courses. Guide to characteristic strengths of damp-proof course material used in masonry B/546 This standard is withdrawn as the DD status is no longer used DD 88:1983 Method for the assessment of pot life of nonflowing resin compositions for use in civil engineering B/517/8 This standard is withdrawn as the DD status is no longer used DD 171:1987 Guide to specifying performance requirements for hinged or pivoted doors (including test methods) B/538/2 This standard is withdrawn as the DD status is no longer used DD 246:1999 Recommendations for the use of the cone calorimeter FSH/21 This standard is withdrawn as the DD status is no longer used DD 247:1998 Documentation. Vocabulary TS/1 This standard is withdrawn as the DD status is no longer used DD 257-1:2003 Methods of analysis of wood preservatives and treated timber. Quantitative analysis of wood preservative solutions and treated timber containing boron compounds. Determination of total boron B/515 This standard is withdrawn as the DD status is no longer used Update Standards November 2012 Prices may be subject to change. 37

38 British Standards Withdrawn continued... DD 257-2:2003 Methods of analysis of wood preservatives and treated timber. Quantitative analysis of wood preservative solutions and treated timber containing n-butyltin compounds. Determination of tributyltin, dibutyltin and monobutyltin B/515 This standard is withdrawn as the DD status is no longer used DD 257-3:2003 Methods of analysis of wood preservatives and treated timber. Quantitative analysis of permethrin in solutions of wood preservatives in organic solvents B/515 This standard is withdrawn as the DD status is no longer used DD 257-4:2003 Methods of analysis of wood preservatives and treated timber. Quantitative analysis of cypermethrin in solutions of wood preservatives in organic solvents B/515 This standard is withdrawn as the DD status is no longer used DD 257-5:2003 Methods of analysis of wood preservatives and treated timber. Determination of carboxylic acid type in zinc and copper carboxylate preservative solutions by gas chromatography B/515 This standard is withdrawn as the DD status is no longer used DD 7995:2003 Specification for temporary access platforms. Performance and design requirements, and test methods B/514/42 This standard is withdrawn as the DD status is no longer used DD 8464:2005 Estate agency services. Residential property sales. Specification for the provision of the service SVS/7/1 This standard is withdrawn as the DD status is no longer used Help Us to Help You! Always quote your Customer Number Don t know your number? Contact Customer Services who will be happy to check it for you DD :1999 Soil analysis. Determination of polycyclic aromatic hydrocarbons (PAH) EH/4 This standard is withdrawn as the DD status is no longer used BS EN 1551:2000 Safety of industrial trucks. Self propelled trucks over kg capacity MHE/7 Superseded by BS EN ISO :2012 BS EN :1999 Safety of industrial trucks. Self-propelled trucks up to and including kg capacity and industrial tractors with a drawbar pull up to and including N. General requirements MHE/7 Superseded by BS EN ISO :2012 BS EN ISO :1999 (ISO :1997) Dental handpieces. High-speed air turbine handpieces CH/106/4 Superseded by BS EN ISO 14457:2012 BS EN ISO :1998 Dental handpieces. Straight and geared angle handpieces CH/106/4 Superseded by BS EN ISO 14457:2012 BS EN ISO 8373:1996 Manipulating industrial robots. Vocabulary AMT/4 Superseded by BS ISO 8373:2012 BS EN ISO 11498:2000 Dental handpieces. Dental low-voltage electric motors CH/106/4 Superseded by BS EN ISO 14457:2012 DD CEN/TS :2005 Plastics piping systems for non-pressure underground drainage and sewerage. Polyethylene (PE). Guidance for the assessment of conformity PRI/88/1 Superseded by PD CEN/TS :2012 BS EN ISO 13294:1997 Dental handpieces. Dental air-motors CH/106/4 Superseded by BS EN ISO 14457:2012 BS EN 24920:1992 (ISO 4920:1981) Textiles. Determination of resistance to surface wetting (spray test) of fabrics TCI/24 Superseded by BS EN ISO 4920:2012 BS EN 45011:1998 General requirements for bodies operating product certification systems CAS/1 Superseded by BS EN ISO/IEC 17065:2012 BS EN :1998+A2:2008 Alarm systems. Alarm transmission systems and equipment. General requirements for alarm transmission systems GW/1/5 Superseded by BS EN :2012 BS EN :1998 Alarm systems. Alarm transmission systems and equipment. Requirements for systems using dedicated alarm paths GW/1 Superseded by BS EN :2012 BS EN :1998 Alarm systems. Alarm transmission systems and equipment. Requirements for systems with digital communicators using the public switched telephone network GW/1 Superseded by BS EN :2012 BS EN :1998 Alarm systems. Alarm transmission systems and equipment. Requirements for systems with voice communicators using the public switched telephone network GW/1 Superseded by BS EN :2012 BS EN :2008 Alarm systems. Alarm transmission systems and equipment. Requirements for packet switched network PSN GW/1/5 Superseded by BS EN :2012 BS EN :1998 Rotating electrical machines. A.C. generators for reciprocating internal combustion (RIC) engine driven generating sets PEL/2 Superseded by BS EN :2009 BS EN :2006 Household and similar electrical appliances. Safety. Particular requirements for drives for rolling shutters, awnings, blinds and similar equipment CPL/61/01 Superseded by BS EN :2006+A2:2010 BS EN :2000 Low voltage switchgear and controlgear assemblies. Particular requirements for busbar trunking systems (busways) PEL/17/3 Superseded by BS EN :2012 BS EN :1997 (BS :1997) Medical electrical equipment. Particular requirements for safety. Specification for blankets, pads and mattresses intended for heating in medical use CH/62/4 Superseded by BS EN : Update Standards November 2012 Prices may be subject to change.

39 BS EN :2000 Medical electrical equipment. Particular requirements for safety. Particular requirements for the safety of surgical luminaires and luminaires for diagnosis CH/62/4 Superseded by BS EN :2009 BS EN :2004 Liquid crystal and solid-state display devices. Measuring methods for liquid crystal modules. Transmissive type EPL/47 Superseded by BS EN :2012 BS EN 62079:2001 Preparation of instructions. Structuring, content and presentation GEL/3 Superseded by BS EN :2012 BS EN 62083:2001 Medical electrical equipment. Requirements for the safety of radiotherapy treatment planning systems CH/62/3 Superseded by BS EN 62083:2009 BS ISO 7859:2000 Mopeds. Fuel consumption measurements AUE/14 Superseded by BS ISO :2012, BS ISO :2012 and BS ISO :2012 DD CEN ISO/TS 17261:2005 Intelligent transport systems. Automatic vehicle and equipment identification. Intermodal goods transport architecture and terminology EPL/278 Superseded by BS EN ISO 17261:2012 DD CEN ISO/TS 17262:2003 Automatic vehicle and equipment identification. Intermodal goods transport. Numbering and data structures EPL/278 Superseded by BS EN ISO 17262:2012 DD IEC/PAS 62573:2008 Real-time Ethernet. Real-time automation protocol for industrial Ethernet (RAPIEnet) AMT/7 Superseded by BS EN :2012, BS EN :2012, BS EN :2012 and BS EN :2012 DD IEC/PAS :2011 Process management for avionics. Aerospace qualified electronic components (AQEC). General requirements for high reliability integrated circuits and discrete semiconductors GEL/107 Superseded by PD IEC/TS :2012 PD 6506:1982 Guide for typewriting IDT/2 PD 6568:1992 Draft standard to match to and work with ETS /NET4. Specification for simple telephones for connection to public switched telephone networks run by certain public telecommunications operators TCT/2 PD :1992 Draft standard to match to and work with ETS /NET4 Apparatus with one or more particular functions for connection to public switched telephone networks run by certain public telecommunications operators. Specification for general requirements TCT/2 PD :1992 Draft standard to match to and work with ETS /NET4 Apparatus with one or more particular functions for connection to public switched telephone networks run by certain public telecommunications operators. Specification for apparatus with loudspeaking facilities TCT/2 PD :1992 Draft standard to match to and work with ETS /NET4. Apparatus with one or more particular functions for connection to public switched telephone networks run by certain public telecommunications operators. Apparatus with auto-calling, auto-answering and auto-clearing facilities. Specification for auto-calling facilities TCT/2 PD :1992 Draft standard to match to and work with ETS /NET4. Apparatus with one or more particular functions for connection to public switched telephone networks run by certain public telecommunications operators. Apparatus with auto-calling, auto-answering and auto-clearing facilities. Specification for auto-answering and auto-clearing facilities TCT/2 PD :1992 Draft standard to match to and work with ETS /NET4 Apparatus with one or more particular functions for connection to public switched telephone networks run by certain public telecommunications operators. Specification for series connected apparatus. Apparatus having maximum allowable impairments TCT/2 PD :1992 Draft standard to match to and work with ETS /NET4 Apparatus with one or more particular functions for connection to public switched telephone networks run by certain public telecommunications operators. Specification for series connected apparatus. Apparatus having less than maximum allowable impairments TCT/2 PD :1992 Draft standard to match to and work with ETS /NET4 Apparatus with one or more particular functions for connection to public switched telephone networks run by certain public telecommunications operators. Specification for apparatus with call barring facilities TCT/2 PD :1992 Draft standard to match to and work with ETS /NET4 Apparatus using cordless attachments (excluding cellular radio apparatus) for connection to analogue interfaces of public switched telephone networks run by certain public telecommunications operators. Specification for general requirements TCT/2 PD :1992 Draft standard to match to and work with ETS /NET4 Apparatus using cordless attachments (excluding cellular radio apparatus) for connection to analogue interfaces of public switched telephone networks run by certain public telecommunications operators. Specification for cordless telephone apparatus using radio links TCT/2 PD :1992 Draft standard to match to and work with ETS /NET4 Apparatus using cordless attachments (excluding cellular radio apparatus) for connection to analogue interfaces of public switched telephone networks run by certain public telecommunications operators. Specification for cordless portable parts and cordless fixed parts as separate stand alone items TCT/2 BS 2A 24:1962 Specification for corrosion-resisting steel hexagonal nuts (B.A and B.S.F. threads) (ordinary, thin, slotted and castle) for aircraft Update Standards November 2012 Prices may be subject to change. 39

40 British Standards Withdrawn continued... BS 2A 25:1962 Specification for steel hexagonal-headed bolts (B.A. and B.S.F. threads) for aircraft BS 2A 26:1962 Specification for corrosion-resisting steel hexagonal-headed bolts (B.A and B.S.F. threads) for aircraft BS 2A 29:1962 Specification for aluminium alloy hexagonal nuts (B.A and B.S.F. threads) (ordinary and slotted) for aircraft BS 2A 30:1962 Specification for steel hexagonal-headed bolts (B.A. and B.S.F threads) with close tolerance shanks for aircraft BS 2A 57:1962 Specification for steel hexagonal-headed shear bolts (B.S.F. threads) for aircraft BS 2A 58:1962 Specification for steel hexagonal nuts (B.S.F. threads) for shear bolts for aircraft BS 2A 59:1962 Specification for cadmium-plated steel hexagonal-headed bolts (B.A. and B.S.F. threads) with close tolerance shanks for aircraft BS 2A 60:1962 Specification for cadmium-plated steel hexagonal-headed shear bolts (B.S.F. threads) for aircraft BS 2A 61:1962 Specification for aluminium alloy hexagonal headed bolts (B.A. and B.S.F. threads) for aircraft BS 3A 212:1993 Specification for cadmium-plated steel bolts, 55/65 tonf/in 2 (Unified hexagons, 3A Unified threads and close tolerance shanks) BS A 281; A 282 [...]:1981 Specification for hexagon (thin) self-locking nuts with non-metallic locking inserts. Metric series BS A 287; A 288 [...]:1982 Specification for hexagon socket head cap screws. Metric series BS 2E 21:1957 Pren type electric cables for aircraft ACE/6 BS 4F 33:1961 Specification for flexible cotton rope for aeronautical purposes ACE/65 BS 4F 57:1990 Specification for scoured cotton fabric for inflatable equipment for aerospace purposes ACE/65 BS 3F 122:1989 Specification for two ply cotton fabric interlayered with polychloroprene for liferaft packs ACE/65 BS F 125:1973 Specification for rubber bonded compressed asbestos fibre jointing ACE/65 BS F 131:1986 Specification for chlorosulphonated polyethylene rubber coated nylon fabric (300 g/m 2 ) for aerospace purposes ACE/65 BS 3G :1980 Specification for general requirements for equipment for use in aircraft. Electrical equipment. Electromagnetic interference at radio and audio frequencies ACE/6 BS G 142:1953 Specification for heavy duty, electromagnetically operated, single-pole circuitbreakers for extra-low voltage d.c. systems in aircraft ACE/6 BS G 176-1:1960 Specification for cartridge fuses for aircraft. General requirements ACE/6 BS G 176-2:1960 Specification for cartridge fuses for aircraft. Cartridge fuses and fuse-links (Type A) ACE/6 BS G 176-3:1961 Specification for cartridge fuses for aircraft. Cartridge fuse-links (Type B) ACE/6 BS G 176-4:1962 Specification for cartridge fuses for aircraft. Cartridge fuse-links (Type C) ACE/6 BS G 176-5:1966 Specification for cartridge fuses for aircraft. Cartridge fuse-links (Type D) ACE/6 BS G 177:1961 Specification for Nyvin type electrical cables for aircraft ACE/6 BS G 184 to G 188:1964 Specification for aluminium terminal ends and in-line connectors for hexagonal crimping to aircraft aluminium electrical cables ACE/6 40 Update Standards November 2012 Prices may be subject to change.

41 BS G 189:1964 Specification for Tersil type electrical cables for aircraft ACE/6 BS G 192:1965 Specification for Efglas type electric cables with copper conductors for aircraft ACE/6 BS G 195:1966 Specification for Minyvin type electric cables for aircraft ACE/6 BS G 208:1970 Specification for general requirements for electrical relays up to 10 A rating ACE/6 BS 2G 221:1980 Specification for Minyvin type electric cables (metric units) ACE/6 BS G 224:1978 Specification for lever-operated manual switches for aircraft ACE/6 BS G 227:1979 Specification for Tersil type electric cables (metric units) ACE/6 BS 4K 6:1928 Specification for aircraft material. Cast iron piston ring pots (sand cast and chill cast) BS 5L 34:1985 Specification for forging stock, bars, extruded sections and forgings of 99% aluminium ACE/61/-/24 BS 5L 44:1985 Specification for forging stock, bars, extruded sections and forgings of aluminium-2 1 4% magnesium alloy ACE/61/-/24 BS 3L 51:1970 Specification for ingots and castings of aluminium-silicon-copper-iron-nickelmagnesium alloy (precipitation treated) (Si 2.5, Cu 1.2, Fe 1, Ni 1, Mg 0.1) ACE/61/-/24 BS 3L 58:1971 Specification for wire for solid, cold-forged rivets of aluminium-5% magnesium alloy (not exceeding 10 mm diameter) ACE/61/-/24 BS 4L 60:1985 Specification for sheet and strip of aluminiummanganese alloy (temper designation H12 or H22) ACE/61/-/24 BS 4L 61:1985 Specification for sheet and strip of aluminiummanganese alloy (temper designation-o) ACE/61/-/24 BS 3L 78:1970 Specification for ingots and castings of aluminium-silicon-copper-magnesium alloy (solution treated and precipitation treated) (Si 5, Cu 1.2, Mg 0.5) ACE/61/-/24 BS 3L 80:1985 Specification for sheet and strip of aluminium % magnesium alloy (temper designation-o) ACE/61/-/24 BS 3L 81:1985 Specification for sheet and strip of aluminium % magnesium alloy (temper designation H16 or H26) ACE/61/-/24 BS 2L 83:1971 Specification for forging stock, bars, extruded sections and forgings of aluminium-coppernickel-magnesium-iron-silicon alloy (solution treated and precipitation treated) (Cu 2, Ni 1, Mg 1, Si 0.9, Fe 0.9) ACE/61/-/24 BS 2L 85:1971 Specification for forging stock, bars, extruded sections and forgings of aluminium-coppersilicon-magnesium alloy (solution treated and precipitation treated) (Cu 1.5 Si 1, Mg 0.8) ACE/61/-/24 BS 3L 86:1971 Specification for wire for solid, cold-forged rivets of aluminium-copper-magnesium alloy (not exceeding 10 mm diameter) (Cu 2.5, Mg 0.3) ACE/61/-/24 BS 2L 87:1971 Specification for hexagonal bars for nuts, couplings and hollow machined parts of aluminium-copper-magnesium-siliconmanganese alloy (solution treated and precipitation treated) (free from peripheral and asymmetric coarse grain) (not less than 14 mm nor more than 36 mm across flats) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8) ACE/61/-/24 BS 2L 93:1971 Specification for plate of aluminium-coppermagnesium-silicon-manganese alloy (solution treated, controlled stretched and precipitation treated) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8) ACE/61/-/24 BS 2L 97:1971 Specification for plate of aluminium-coppermagnesium-manganese alloy (solution treated, controlled stretched and aged at room temperature) (Cu 4.4, Mg 1.5, Mn 0.6) ACE/61/-/24 BS 2L 98:1971 Specification for plate of aluminium-coppermagnesium-manganese alloy (solution treated and aged at room temperature: not controlled stretched) (Cu 4.4, Mg 1.5, Mn 0.6) ACE/61/-/24 BS L 103:1971 Specification for forging stock and forgings of aluminium-copper-magnesium-siliconmanganese alloy (solution treated and aged at room temperature) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8) ACE/61/-/24 Update Standards November 2012 Prices may be subject to change. 41

42 British Standards Withdrawn continued... BS 3L 124:1970 Specification for ingots and castings of magnesium 10% aluminium-zinc-manganese alloy (solution treated) (Al 10, Zn 0.5, Mn 0.3) ACE/61/-/24 BS 3L 125:1970 Specification for ingots and castings of magnesium 10% aluminium-zinc-manganese alloy (solution treated and precipitation treated) (Al 10, Zn 0.5, Mn 0.3) ACE/61/-/24 BS 2L 127:1970 Specification for ingots and castings of magnesium-zinc-zirconium alloy (precipitation treated) (Zn 4.5, Zr 0.7) ACE/61/-/24 BS L 158:1978 Specification for close toleranced sheet and strip of aluminium-copper-magnesium-siliconmanganese alloy (solution treated and aged at room temperature) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8) ACE/61/-/24 BS L 159:1978 Specification for close toleranced sheet and strip of aluminium-copper-magnesium-siliconmanganese alloy (solution treated and artificially aged) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8) ACE/61/-/24 BS L 161:1976 Specification. Hand and die forgings of aluminium-zinc-magnesium-copper-chromium alloy (solution treated and artificially aged to an overaged condition) (Zn 5.6, Mg 2.5, Cu 1.6, Cr 0.22) ACE/61/-/24 BS L 162:1976 Specification. Cold compressed hand forgings of aluminium-zinc-magnesium-copper-chromium alloy (solution treated and artificially aged to an overaged condition) (Zn 5.6, Mg 2.5, Cu 1.6, Cr 0.22) ACE/61/-/24 BS L 163:1978 Specification for sheet and strip of aluminiumcoated aluminium-copper-magnesium-siliconmanganese alloy (solution treated, cold worked for flattening and aged at room temperature) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8) ACE/61/-/24 BS L 166:1978 Specification for close toleranced sheet and strip of aluminium-coated aluminium-coppermagnesium-silicon-manganese alloy (solution treated and aged at room temperature) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8) ACE/61/-/24 BS L 167:1978 Specification for close toleranced sheet and strip of aluminium-coated aluminium-coppermagnesium-silicon-manganese alloy (solution treated and artificially aged) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8) ACE/61/-/24 BS 2L 503:1973 Specification for tube of magnesium-6% aluminium-zinc alloy (Al 6.0, Zn 1.0) ACE/61/-/24 BS 2L 504:1973 Specification for sheet and strip of magnesium- 3% zinc-zirconium alloy (Zn 3.0, Zr 0.6) ACE/61/-/24 BS 2L 505:1973 Specification for bars and extruded sections of magnesium-3% zinc-zirconium alloy (not exceeding 100 mm diameter or minor sectional dimension) (Zn 3.0, Zr 0.6) ACE/61/-/24 BS 2L 508:1973 Specification for bars and extruded sections of magnesium-1 1 4% zinc-zirconium alloy (suitable for welding by inert-gas shielded arc techniques) (not exceeding 50 mm diameter or minor sectional dimension) (Zn 1.25, Zr 0.6) ACE/61/-/24 BS 2L 509:1973 Specification for tube of magnesium-1 1 4% zinczirconium alloy (suitable for welding by inertgas shielded arc techniques) (Zn 1.25, Zr 0.6) ACE/61/-/24 BS L 512:1973 Specification for bars and extruded sections of magnesium-6% aluminium-zinc alloy (not exceeding 150 mm diameter or minor sectional dimension) (Al 6.0, Zn 1.0) ACE/61/-/24 BS L 514:1973 Specification for forging stock and forgings of magnesium-3% zinc-zirconium alloy (Zn 3.0, Zr 0.6) ACE/61/-/24 BS L 515:1973 Specification for sheet and strip of magnesium % zinc-zirconium alloy (suitable for welding by inert-gas shielded arc techniques) (Zn 1.25, Zr 0.6) ACE/61/-/24 BS 7S 1:1964 Specification for aircraft material. Carbon steel bright bars for machining (35/45 tonf/sq in; maximum size, 4 inches diameter or minor sectional dimension) BS 4S 14:1964 Specification for aircraft material. Carbon casehardening steel BS 5S 15:1964 Specification for aircraft material. 3 per cent nickel case-hardening steel BS 5S 21:1964 Specification for aircraft material. 20 carbon steel (suitable for welding) (25/35 tonf/sq in: maximum size 6 inches diameter or minor sectional dimension) BS 4S 28:1964 Specification for aircraft material. 4 per cent nickel-chromium-molybdenum steel (air hardening) (100 tonf/sq in: limiting ruling section in) BS 3S 61:1964 Specification for aircraft material. 12 per cent chromium corrosion-resisting steel (35/45 tonf/sq in: limiting ruling section 6 in) BS 3S 62:1964 Specification for aircraft material. 12 per cent chromium corrosion-resisting steel (45/55 tonf/sq in: limiting ruling section 6 in) 42 Update Standards November 2012 Prices may be subject to change.

43 BS 3S 91:1977 Specification for mild steel billets, bars, forgings and parts (suitable for bearing shells) BS 2S 92:1964 Specification for aircraft material. Carbonmanganese steel (suitable for welding) (40/55 tonf/sq in: limiting ruling section 4 in) BS 2S 93:1964 Specification for aircraft material. 40 carbon steel (normalized) (35/45 tonf/sq in: limiting ruling section 6 in) BS 3S 95:1967 Specification for per cent nickel-chromiummolybdenum steel (90/110 kgf/mm 2 (57/70 tonf/in 2 ): limiting ruling section 150 mm (6 in)) BS 2S 97:1964 Specification for aircraft material per cent nickel-chromium-molybdenum steel (65/75 tonf/sq in: limiting ruling section 6 in) BS 2S 98:1964 Specification for aircraft material per cent nickel-chromium-molybdenum steel (high carbon) (75/85 tonf/sq in: limited ruling section 6 in) BS 3S 105:1969 Specification for carbon steel (bar for the manufacture of forged bolts only) BS 2S 111:1964 Specification for aircraft material. Nickelchromium-tungsten valve steel BS 2S 112:1964 Specification for aircraft material. Semi-free cutting carbon steel, bright bars for machining (40-50 tonf/sq in: maximum size 1 2 inch diameter or minor sectional dimension) (primarily intended for the manufacture of nuts) BS 2S 113:1964 Specification for aircraft material. 40 carbon steel bright bars for machining (45-55 tonf/sq in: limiting ruling section 1 inch) (primarily intended for the manufacture of nuts) BS 2S 114:1964 Specification for aircraft material. Manganesemolybdenum steel (55/65 tonf/sq in: limiting ruling section inches) BS 2S 116:1964 Specification for aircraft material. 40 carbon steel bright bars for machining (55-65 tonf/sq in: limiting ruling section 3 4 inch) (primarily intended for the manufacture of machined bolts) BS 2S 117:1964 Specification for aircraft material. 1 per cent chromium steel (55/65 tonf/sq in: limiting ruling section inch) BS 2S 124:1964 Specification for aircraft material. 12 per cent chromium corrosion-resisting steel (free machining) (45/55 tonf/sq in: limiting ruling section 6 in) BS S 126:1964 Specification for aircraft material. 23/14 chromium-nickel heat-resisting steel (niobium stabilized) (35 tonf/sq in: limiting ruling section 6 in) BS 2S 137:1976 Specification for high chromium-nickel corrosion-resisting steel bright bars (free machining) ( MPa: limiting ruling section 70 mm) BS S 138:1967 Specification for 3 per cent chromiummolybdenum-vanadium steel (vacuum remelted air hardening) (157 kgf/mm 2 (100 tonf/in 2 ): limiting ruling section 30 mm (1 1 8 in)) BS S 139:1968 Specification for per cent nickel-chromiummolybdenum steel (110/130 kgf/mm 2 (70/83 tonf/in 2 ): limiting ruling section 70 mm (2 3 4 in)) BS S 141:1968 Specification for 12 per cent chromium corrosion-resisting steel (60/80 kgf/mm 2 (38/51 tonf/in 2 ): limiting ruling section 150 mm (6in)) BS 5T 2:1972 Specification for 4/1 nickel-chromium steel tube (1300 N/mm 2 ) BS 4T 45:1972 Specification for carbon-manganese steel tube (700 N/mm 2 ) (tube 12.5 mm outside diameter and greater) (weldable) BS 2T 57:1972 Specification for 4/1 nickel-chromium steel tube (1150 N/mm 2 ) BS T 64:1972 Specification for carbon-manganese steel tube (550 N/mm 2 ) (tube less than 12.5 mm outside diameter) (weldable) BS T 67:1972 Specification for 18/10 chromium-nickel corrosion-resisting steel tube (titanium stabilized: 550 N/mm 2 ) (weldable) BS T 69:1972 Specification for cold drawn 18/10 chromiumnickel corrosion-resisting steel tube (titanium stabilized: 800 N/mm 2 ) (weldable) To order visit Update Standards November 2012 Prices may be subject to change. 43

44 British Standards Withdrawn continued... BS T 74:1972 Specification for low carbon 18/10 chromiumnickel corrosion-resisting steel tube (500 N/mm 2 ) BS T 75:1972 Specification for low carbon 17/12 chromiumnickel-molybdenum corrosion-resisting steel tube (500 N/mm 2 ) BS 5V 7:1952 Specification for mahogany for use in airscrews BS 2X 27:1991 Specification for cellulose finishing scheme for aerospace purposes ACE/65/-/3 BS HC 1:1973 Specification for carbon steel castings (500 N/mm 2 ) BS HC 2:1973 Specification for carbon-manganese steel castings (550 N/mm 2 ) BS HC 3:1973 Specification for 1% chromium-molybdenum low alloy steel castings (700 N/mm 2 ) BS HC 4:1973 Specification for 3% chromium-molybdenum steel castings ( N/mm 2 ) BS HC 5:1973 Specification for 3% nickel case hardening steel castings (700 N/mm 2 ) BS HC 6:1973 Specification for 3% chromium-molybdenum nitriding steel castings ( N/mm 2 ) BS HC 403:1977 Specification for high chromium alloy cast iron ring pots (centrifugally cast) (suitable for piston rings up to 400 mm in diameter) BS 2SP 7:1943 Specification for aircraft material. Fork joints (high tensile type) (for sizes No. 4 B. A. to 3 4 inch B.S.F. inclusive) BS SP 21:1950 Specification for lubricating nipples for aircraft purposes BS SP 28 and 29:1951 Specifications for solid taper pins for aeronautical purposes. Specifications for solid taper pins for aeronautical purposes BS SP 31 and 32:1951 Specifications for split taper pins for aeronautical purposes BS SP 65:1955 Specification for aluminium alloy taper pins for aeronautical purposes BS 2SP 96:1982 Specification for internal retaining rings (imperial sizes) BS SP 166:1982 Specification for spring retaining rings for aerospace application: carbon steel circlips (metric series) BS 2TA 3:1973 Specification for bar and section for machining of commercially pure titanium (tensile strength N/mm 2 ) ACE/61/-/49 BS 2TA 4:1973 Specification for forging stock of commercially pure titanium (tensile strength N/mm 2 ) ACE/61/-/49 BS 2TA 5:1973 Specification for forgings of commercially pure titanium (tensile strength N/mm 2 ) ACE/61/-/49 BS 2TA 8:1973 Specification for forging stock of commercially pure titanium (tensile strength N/mm 2 ) ACE/61/-/49 BS 2TA 9:1973 Specification for forgings of commercially pure titanium (tensile strength N/mm 2 ) ACE/61/-/49 BS 2TA 22:1973 Specification for bar and section for machining of titanium-copper alloy (tensile strength N/mm 2 ) ACE/61/-/49 BS 2TA 23:1973 Specification for forging stock of titaniumcopper alloy (tensile strength N/mm 2 ) ACE/61/-/49 BS 2TA 24:1973 Specification for forgings of titanium-copper alloy (tensile strength N/mm 2 ) ACE/61/-/49 BS TA 43:1972 Specification for forging stock of titaniumaluminium-zirconium-molybdenum-silicon alloy (tensile strength N/mm 2 ) (limiting ruling section 65 mm) ACE/61/-/49 BS TA 44:1972 Specification for forgings of titaniumaluminium-zirconium-molybdenum-silicon alloy (tensile strength N/mm 2 ) (limiting ruling section 65 mm) ACE/61/-/49 44 Update Standards November 2012 Prices may be subject to change.

45 BS TA 53:1973 Specification for bar and section for machining of titanium-copper alloy (tensile strength N/mm 2 ) (limiting ruling section 75 mm) ACE/61/-/49 BS TA 54:1973 Specification for forging stock of titaniumcopper alloy (tensile strength N/mm 2 ) (limiting ruling section 75 mm) ACE/61/-/49 BS TA 55:1973 Specification for forgings of titanium-copper alloy (tensile strength N/mm 2 ) (limiting ruling section 75 mm) ACE/61/-/49 BS AU a:2002 (ISO :2001) Tyres and wheels. Rim profiles and dimensions. Commercial vehicle rims. Specification for metric series rims AUE/4 Superseded by BS ISO :2012 PAS 79:2007 Fire risk assessment. Guidance and a recommended methodology Superseded by PAS 79:2012 PAS 99:2006 Specification of common management system requirements as a framework for integration (Italian translation) This standard is withdrawn as although PAS 99:2006 (English Version) has been revised to PAS 99:2006, there will not be a replacement for the Italian Version CP 151-1:1957 Doors and windows including frames and linings. Wooden doors B/538/2 CP 153-2:1970 Windows and rooflights. Windows and rooflights. Durability and maintenance B/538/1 CP 153-3:1972 Windows and rooflights. Windows and rooflights. Sound insulation B/538/1 BRITISH STANDARDS UNDER REVIEW The following British Standards implement International and/or European Standards which are currently under review to see if they should be confirmed, revised or withdrawn. Comments should be sent to Debbie Stead, Head of Committee Service Centre and International Secretariat, BSI Group, 389 Chiswick High Road, London W4 4AL or via to BSUKoperations.review@bsigroup.com by 31 December, 2012, in order to be considered by the relevant UK Committee. BS EN 20-2:1993 Wood preservatives. Determination of the protective effectiveness against Lyctus brunneus (Stephens). Application by impregnation (laboratory method) B/515 BS EN 84:1997 Wood preservatives. Accelerated ageing of treated wood prior to biological testing. Leaching procedure B/515 BS EN 212:2003 Wood preservatives. General guidance on sampling and preparation for analysis of wood preservatives and treated timber B/515 BS EN 370:1993 Wood preservatives. Determination of eradicant efficacy in preventing emergence of Anobium punctatum (De Geer) B/515 DD ENV :1995 Wood preservatives. Methods of measuring losses of active ingredients and other preservative ingredients from treated timber. Laboratory method for obtaining samples for analysis to measure losses by evaporation to air B/515 DD ENV :1995 Wood preservatives. Methods of measuring losses of active ingredients and other preservative ingredients from treated timber. Laboratory method for obtaining samples for analysis to measure losses by leaching into water or synthetic sea water B/515 DD CEN/TS 12037:2003 Wood preservatives. Field test method for determining the relative protective effectiveness of a wood preservative exposed out of ground contact. Horizontal lap-joint method B/515 BS EN 14128:2003 Durability of wood and wood-based products. Performance criteria for products for curative uses against wood attacking organisms as determined by biological tests B/515 DD CEN/TS 15082:2005 Wood preservatives. Determination of the preventive effectiveness against sapstain fungi and mould fungi on freshly sawn timber. Field test B/515 BS EN :2008 Surfaces for sports areas. Synthetic turf and needle- punched surfaces primarily designed for outdoor use. Specification for needle-punched surfaces PRI/72 DD CEN/TS 15397:2006 Wood preservatives. Method for natural preconditioning out of ground contact of treated wood specimens prior to biological laboratory test B/515 NEW WORK STARTED The reference number of the committee responsible for each item of new work started is given after each entry. Where a work item has the temporary designation EN XXXX, it has not yet been allocated a standard number by the European standards body. BS 8462:2005+A2:2012/A3 Goals for youth football, futsal, mini-soccer and small-sided football. Specification SW/136/22 BS 8596 Code of practice for bat surveys for trees and in woodland BDY/1 EN TC 275 N 1061 Foodstuffs. Determination of acrylamide in potato-based products, cereal based products and coffee with GC-MS AW/275 EN TC 275 N 1062 Foodstuffs. Determination of acrylamide in potato-based products, cereal based products and coffee with LC-ESI-MS/MS AW/275 EN TC 275 N 1063 Foodstuffs. Determination of benzo(a)pyrene, benzo(a)anthracene, chrysene and benzo(b)fluoranthene in foodstuffs with GC-MS AW/275 Update Standards November 2012 Prices may be subject to change. 45

46 New Work Started continued... EN TC 275 N 1064 Foodstuffs. Determination of benzo(a)pyrene, benzo(a)anthracene, chrysene and benzo(b)fluoranthene in foodstuffs with HPLC- FD AW/275 EN TC 275 N 1065 Foodstuffs. Determination of benzene in soft drinks, juices and baby food with HS GC-MS AW/275 EN TC 275 N 1068 Foodstuffs. Determination of melamine and cyanuric acid in foodstuffs with LC-MS/MS AW/275 EN TC 275 N 1069 Foodstuffs. Determination of mineral oil in vegetable oils and foodstuffs on basis of vegetable oils AW/275 EN TC 275/WG 13 Foodstuffs. Determination of furan in coffee with HS GC-MS AW/275 EN WI Textile child care articles. Safety requirements and test methods for children s cot duvets TCI/66/-/1 EN WI Textile child care articles. Safety requirements and test methods for children s cot bumpers TCI/66/-/1 EN WI Textile child care articles. Safety requirements and test methods for children s sleep bags TCI/66/-/1 EN WI Child use and care articles. Guidelines for the safety of children s slings CW/1/1 EN WI Foodstuffs. Determination of ethyl carbamate in stone fruit spirits, fruit marc spirits and other alcoholic beverages with GC-MS AW/275 EN Personal protective equipment against falls from a height. Guided type fall arresters including a rigid anchor line will supersede BS EN 353-1:2002 PH/5 EN Compressors and vacuum pumps. Safety requirements. Process compressors MCE/8 EN Furniture. Assessment of the ignitability of upholstered furniture. Ignition source smouldering cigarette will supersede BS EN :2006 FW/6 EN Furniture. Assessment of the ignitability of upholstered furniture. Ignition source match flame equivalent will supersede BS EN :2006 FW/6 EN 1041:2008/A1 Information supplied by the manufacturer of medical devices CH/210/3 EN Safety nets. Safety requirements, test methods will supersede BS EN :2002 B/514 EN Safety nets. Safety requirements for the positioning limits will supersede BS EN :2002 B/514 EN Fire resistance tests for service installations. Fire dampers will supersede BS EN :1999 FSH/22/-/4 EN Identification card systems. Surface transport applications. Elementary data types, general code lists and general data elements will supersede BS EN :2005 IST/17 EN Identification card systems. Surface transport applications. Transport and travel payment related data elements and code lists will supersede BS EN :2005 IST/17 EN :2005/A1 Eurocode 3. Design of steel structures. General rules and rules for buildings CB/203 EN :2005/A1 Eurocode 4. Design of composite steel and concrete structures. General rules. Structural fire design B/525/4 EN :2004/A1 Eurocode 7. Geotechnical design. General rules B/526 EN :2007+A1:2009/A2 Eurocode 9. Design of aluminium structures. General structural rules B/525/9 EN ISO 4287:1998+A1:2009/A2 Geometrical product specification (GPS). Surface texture: Profile method. Terms, definitions and surface texture parameters TDW/4 EN ISO :2002/A1 Mechanical vibration. Measurement and assessment of human exposure to handtransmitted vibration. Practical guidance for measurement at the workplace GME/21/6 EN ISO :2001+A1:2009/A2 Textile machinery. Noise test code. Common requirements TCI/33 EN ISO :2001+A1:2009/A2 Textile machinery. Noise test code. Spinning preparatory and spinning machinery TCI/33 EN ISO :2001+A1:2009/A2 Textile machinery. Noise test code. Nonwoven machinery TCI/33 EN ISO :2001+A1:2009/A2 Textile machinery. Noise test code. Yarn processing, cordage and rope manufacturing machinery TCI/33 EN ISO :2001+A1:2009/A2 Textile machinery. Noise test code. Weaving and knitting preparatory machinery TCI/33 EN ISO :2001+A1:2009/A2 Textile machinery. Noise test code. Fabric manufacturing machinery TCI/33 EN ISO :2001+A1:2009/A2 Textile machinery. Noise test code. Dyeing and finishing machines TCI/33 EN ISO Footwear. Test methods for slide fasteners. Strength of slide fastener pullers TCI/69 EN ISO Footwear. Test method for slide fasteners. Attachment strength of end stops TCI/69 EN ISO Footwear. Test method for slide fasteners. Resistance to repeated opening and closing TCI/69 46 Update Standards November 2012 Prices may be subject to change.

47 EN ISO Footwear. Test method for slide fasteners. Lateral strength TCI/69 EN ISO Industrial fans. Performance testing of jet fans will supersede BS EN ISO 13350:2008, BS :1999 MCE/17 EN ISO Packaging. Complete, filled transport packages and unit loads. Vertical random vibration test will supersede BS EN ISO 13355:2003 PKW/0 EN Chimneys. Thermal and fluid dynamic calculation methods. Chimneys serving one appliance will supersede BS EN :2002+A2:2008 B/506 EN Chimneys. Thermal and fluid dynamic calculation methods. Chimneys serving more than one heating appliance will supersede BS EN :2003+A1:2009 B/506 EN :2011/A1 Swimming pool equipment. Additional specific safety requirements and test methods for inlets and outlets and water/air based water leisure features SW/136/8 EN Fairground and amusement park machinery and structures. Safety will supersede BS EN 13814:2004 MCE/3/4 EN ISO/IEC :1997/A3 Information technology. Generic coding of moving pictures and associated audio information. Systems IST/37 EN Flexible sheets for waterproofing. Definitions and characteristics of underlays. Underlays for discontinuous roofing will supersede BS EN :2010 B/546 EN Flexible sheets for waterproofing. Definitions and characteristics of underlays. Underlays for walls will supersede BS EN :2010 B/546 EN Surface treatment equipment. Noise test code for surface treatment equipment including its ancillary handling equipment. Accuracy grades 2 and 3 will supersede BS EN 14462:2005+A1:2009 MCE/3/8 EN Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling. Test methods will supersede BS EN :2011 RHE/17 EN Ambient air quality. Standard method for measurement of benzene concentrations. Automated pumped sampling with in situ gas chromatography will supersede BS EN :2005 EH/2/1 EN Air conditioners, liquid chilling packages and heat pumps, with electrically driven compressors, for space heating and cooling. Testing and rating at part load conditions and calculation of seasonal performance will supersede BS EN 14825:2012 RHE/17 EN Maintenance. Qualification of maintenance personnel will supersede PD CEN/TR 15628:2007 DS/1 EN Chimneys. Accessories. Draught regulators and standstill opening devices. Requirements and test methods B/506/1 EN Temporary works equipment. Encapsulation constructions. Performance requirements and general design B/514 EN Residential solid fuel burning appliances. General requirements and test methods RHE/28 EN Residential solid fuel burning appliances. Room heaters will supersede BS EN 13240:2001+A2:2004 RHE/28 EN Residential solid fuel burning appliances. Inset appliances including open fires will supersede BS EN 13229:2001+A2:2004 RHE/28 EN Residential solid fuel burning appliances. Cookers will supersede BS EN 12815:2001+A1:2004 RHE/28 EN Residential solid fuel burning appliances. Independent boilers fired by solid fuel. Nominal heat output up to 50 kw will supersede BS EN 12809:2001+A1:2004 RHE/28 EN Loose-laid panels. Multi-layer semi-rigid floor covering (MSF) panels with wear resistant top layer PRI/3/60 CEN/TS Innovation management. Innovation management system IMS/1 EN ISO Footwear. Test methods for uppers and lining. Flex resistance will supersede BS EN 13512:2002 TCI/69 EN ISO Footwear. Test methods for uppers. Delamination resistance will supersede BS EN 13514:2002 TCI/69 EN ISO Footwear. Test methods for uppers, lining and insocks. Colour migration will supersede BS EN 13517:2002 TCI/69 CEN/TS Microbiology of food and animal feed. Sampling techniques for microbiological analysis of food and feed samples AW/9 EN ISO Footwear. Test methods for slide fasteners. Resistance to damage during closure under a lateral force TCI/69 EN ISO Non-destructive testing of welds. Penetrant testing of welds. Acceptance levels will supersede BS EN ISO 23277:2009 WEE/46 CLC/TR Coaxial cables used in cabled distribution networks. Repair and substitute of damaged burried cables EPL/46 Update Standards November 2012 Prices may be subject to change. 47

48 New Work Started continued... EN Fibre organisers and closures to be used in optical fibre communication systems. Product specifications. Fibre management system, connectorised wall box for Category G and C GEL/86/2 EN 50XXX Portable electrical apparatus for the measurement of combustion flue gas parameters of gas-fired boilers in domestic premises. Guide on the selection and use for commissioning, servicing and maintenance GSE/30/-/21 EN 60633:1999+A1:2009/A2 Terminology for high-voltage direct current (HVDC) transmission PEL/22 EN Thermal-links. Requirements and application guide will supersede BS EN 60691:2003+A2:2010 PEL/32 EN :2002/A1 Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V. Cables GEL/20/17 EN :2002/A1 Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V. Terminations GEL/20/17 EN :2004+A13:2012/A2 Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB s). General rules PEL/23/1 EN :2004+A14:2012/A2 Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs). General rules PEL/23/1 EN Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Screen testing of return loss of single mode PC optical fibre connectors. Screen testing of return loss of single mode PC optical fibre connectors will supersede BS EN :2000 GEL/86/2 EN :2011/A1 Powertrack systems. General requirements PEL/213 EN Liquid crystal display devices. Visual inspection. Monochrome liquid crystal display cells EPL/47 EN Liquid crystal display devices. Visual inspection. Monochrome matrix liquid crystal display modules EPL/47 EN Fibre optic connector optical interfaces. Optical interfaces for single mode non-dispersion shifted fibres. General and guidance will supersede BS EN :2006 GEL/86/2 EN Fibre optic connector optical interfaces. Optical interface standard single mode non-angled physically contacting fibres will supersede BS EN :2006 GEL/86/2 EN Fibre optic connector optical interfaces. Optical interface standard single mode angled physically contacting fibres will supersede BS EN :2006 GEL/86/2 EN Fibre optic connector optical interfaces. Optical interface, 2,5 mm and 1,25 mm diameter cylindrical full zirconia PC ferrule, single mode fibre will supersede BS EN :2009 GEL/86/2 EN Fibre optic connector optical interfaces. Optical interface, 2,5 mm and 1,25 mm diameter cylindrical full zirconia ferrules for 8 degrees angled-pc single mode fibres will supersede BS EN :2009 GEL/86/2 ISO 1101:2012/A1 Geometrical product specifications (GPS). Geometrical tolerancing. Tolerances of form, orientation, location and run-out TDW/4 ISO 5681 Equipment for crop protection. Vocabulary will supersede BS ISO 5681:1992 AGE/15 ISO Spraying equipment for crop protection. Method of test for sprayer nozzles will supersede BS :1997 AGE/15 ISO Spraying equipment for crop protection. Test methods for hydraulic sprayers will supersede BS :1997 AGE/15 ISO Spraying equipment for crop protection. Test method for volume/hectare adjustment systems of agricultural hydraulic pressure sprayers will supersede BS :1997 AGE/15 ISO 7010:2011/A171 Graphical symbols. Safety colours and safety signs. Registered safety signs PH/8/1 ISO Fire detection and fire alarm systems. Video fire detectors FSH/12 ISO 7509 Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of time to failure under sustained internal pressure PRI/88/2 ISO/IEC Identification cards. Recording technique. Magnetic stripe. Coercivity of 51,7 ka/m (650 Oe) will supersede BS ISO/IEC :2008 IST/17 ISO Reciprocating internal combustion engines. Vocabulary of components and systems. Ignition systems MCE/14 ISO Reciprocating internal combustion engines. Vocabulary of components and systems. Fuel systems MCE/14 ISO Reciprocating internal combustion engines. Vocabulary of components and systems. Emission control systems MCE/14 ISO 8038 Microscopes. Screw threads for objectives and related nosepieces will supersede BS ISO 8038:2011 CPW/172 ISO 9138 Abrasive grains. Method for sampling and splitting will supersede BS :1993 MTE/13 48 Update Standards November 2012 Prices may be subject to change.

49 ISO 9362 Banking. Banking telecommunication messages. Business identifier code (BIC) will supersede BS ISO 9362:2009 IST/12 ISO 9405 Textile floor coverings. Assessment of changes in appearance PRI/3/60 ISO Agricultural irrigation equipment. Irrigation valves. General requirements will supersede BS ISO :2006 AGE/30 ISO Agricultural irrigation equipment. Irrigation valves. Isolating valves will supersede BS ISO :2006 AGE/30 ISO Agricultural irrigation equipment. Irrigation valves. Control valves will supersede BS ISO :2006 AGE/30 ISO Optics and optical instruments. Preparation of drawings for optical elements and systems. Centring tolerances will supersede BS ISO :1996 CPW/172 ISO Agricultural wheeled tractors and implements. Three-point hitch couplers. U-frame coupler AGE/6 ISO Tissue paper and tissue products. Determination of thickness, bulking thickness and apparent bulk density will supersede BS EN ISO :2005 PAI/11 ISO Copper, lead and zinc sulfide concentrates. Determination of arsenic content. Acid digestion/iron collection/icp method NFE/36 ISO Copper, lead and zinc sulfide concentrates. Determination of arsenic content. Acid digestion and direct ICP method NFE/36 ISO Determination of antifungal activity of textile products. Plate count method TCI/80 ISO Geometrical product specifications (GPS). Dimensional tolerancing. Angular sizes TDW/4 ISO/TR Comparison of worldwide escalator and moving walk safety standards. Rule by rule comparison will supersede PD ISO/TR :2005 MHE/4 ISO/TR Comparison of worldwide escalator and moving walk safety standards. Abbreviated comparison and comments will supersede PD ISO/TR :2005 MHE/4 ISO Intelligent transport systems. Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV). Mass Penalties and Levies (VMC) EPL/278 ISO Intelligent transport systems. Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV). Vehicle access control (VAC) EPL/278 ISO Fatigue test method for transmission precision roller chains MCE/1 ISO Dentistry. Wires for use in orthodontics will supersede BS EN ISO 15841:2006 CH/106 ISO Guidelines for treated wastewater use for irrigation projects. General CB/506 ISO Guidelines for treated wastewater use for irrigation projects. The basis of a reuse project for irrigation CB/506 ISO Guidelines for treated wastewater use for irrigation projects. Development of the project CB/506 ISO Guidelines for treated wastewater use for irrigation projects. Components of a reuse project for irrigation CB/506 ISO Guidelines for treated wastewater use for irrigation projects. Monitoring CB/506 ISO Machines tools. Safety. Machining centres. Safety MTE/1/1 ISO/TS Reclaimed rubber derived from products containing mainly natural rubber. Evaluation procedure PRI/23 ISO/TS Reclaimed isobutene-isoprene (IIR) rubber. Evaluation procedure PRI/23 ISO Ships and marine technology. Protective coatings and inspection method. Assessment and calculating method for damaged coatings area of ballast tanks SME/32/-/8 ISO Magnesium and magnesium alloys. Magnesium alloy ingots and castings will supersede BS ISO 16220:2005 NFE/35 ISO/TS Test methods for repair materials for waterleakage cracks in concrete structures. Test method for chemical resistance B/517/8 ISO Respiratory protective devices. Methods of test and test equipment. Determination of the carbon dioxide content of inhaled air PH/4/11 ISO/IEC Conformity assessment. General requirements for bodies operating certification of persons. Terminology CAS/1 ISO Intelligent transport systems. Public transport user information. Standards framework for public information systems EPL/278 ISO Additive manufacturing. Rapid technologies (rapid prototyping). Test methods AMT/8 ISO Optics and photonics. Optical materials and components. Test method for homogeneity of optical glasses by laser interferometry CPW/172 Update Standards November 2012 Prices may be subject to change. 49

50 New Work Started continued... ISO Geometrical product specifications (GPS). General concepts. Toleranced features TDW/4 ISO Welding consumables. Covered electrodes for manual metal arc welding of copper and copper alloys. Classification WEE/39 ISO Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for thermal fatigue of fine ceramics substrate RPI/13 ISO Processed cheese products. Calculation of content of added phosphate expressed as phosphorus AW/5 ISO/IEC e-textbook IST/43 ISO/IEC Virtual experiments IST/43 ISO/PAS Textile floor coverings. Installation practice PRI/3/60 ISO Corrosion of metals and alloys. Competence levels and certification of cathodic protection personnel ISE/NFE/8 ISO Steels. Determination of the thickness of surface-hardened layers ISE/101/7 ISO Soil quality. Determination of elemental composition by X-ray fluorescence EH/4 ISO/TR Iron ores. Determination of loss on ignition. Gravimetric method for non-oxidised ores ISE/58 ISO Iron ores. Wavelength dispersive X-ray fluorescence spectrometers. Determination of precision ISE/58 ISO/TS Intelligent transport systems. Traffic and Travel Information via transport protocol experts group, generation 1 (TPEG1) binary data format. Parking Information (TPEG-PKI) EPL/278 ISO Iron ores. Determination of loss on ignition. Thermogravimetric method ISE/58 ISO Iron ores. Determination of chromium, arsenic, cadmium, lead and mercury. Inductively coupled plasma-mass spectrometic method ISE/58 ISO Corrosion of metals and alloys. Corrosion test for intergranular corrosion susceptibility of low. Crultrapure ferritic stainless steels ISE/NFE/8 ISO Soil quality. Method for testing effects of soil contaminants on the feeding activity of soil dwelling organisms. Bait-lamina test EH/4 ISO Essential oils. Determination of peroxide value AW/54 ISO Geosynthetics. Index test method for the determination of discharge capacity of prefabricated vertical drains B/553 ISO/IEC Input devices on ICC and enhancements of electronic displays IST/17 ISO The use of electrically conductive geosynthetics in leak detection surveys B/553 ISO Selection of techniques for electrical detection of potential leak paths in geomembrane liner systems B/553 ISO Geometrical product specification (GPS). Population specification TDW/4 ISO Soil quality. Sampling. Framework for the preparation and application of a sampling plan EH/4 ISO Soil quality. Sampling. Selection and application of sampling techniques EH/4 ISO Soil quality. Sampling. Safety EH/4 ISO Soil quality. Sampling. Package, transport, storage, preservation EH/4 ISO Soil quality. Sampling. Quality control and quality assurance EH/4 ISO Soil quality. Sampling. Recording and reporting EH/4 ISO Soil quality. Sampling. Pretreatment in the field EH/4 ISO Thermal well casing connection evaluation protocol PSE/17 ISO Inhalational anaesthesia systems. Draw-over vaporizers and associated equipment will supersede DD ISO/TS 18835:2004 CH/121 ISO/IEC Information technology. Biometric application programming interface. Biometric processing algorithm function provider interface IST/44 ISO/IEC Information technology. Biometric application programming interface. Biometric matching algorithm function provider interface IST/44 ISO/IEC Information technology. Common biometric exchange formats framework. Data element specification will supersede BS ISO/IEC :2006+A1:2010 IST/44 ISO/IEC :2011/A1 Information technology. Learning, education and training. Metadata for learning resources. Framework IST/43 ISO/IEC :2011/A2 Information technology. Biometric data interchange formats. Iris image data IST/44 50 Update Standards November 2012 Prices may be subject to change.

51 ISO/IEC Information technology. Learning, education and training. Quality management, assurance and metrics. Harmonized quality model IST/43 ISO/TS Food safety management systems. Requirements for bodies providing audit and certification of food safety management systems AW/90 ISO/TS Food safety management systems. Guidance on the application of ISO 22000:2005 AW/90 ISO/TS Elastomeric seismic-protection isolators. Guidance on the application of ISO CH/205/3 ISO/IEC Information technology. High efficiency coding and media delivery in heterogeneous environments. MPEG media transport (MMT) IST/37 ISO/TS Ophthalmic optics. Spectacle frames. Method for the simulation of wear and detection of nickel release from metal and combination spectacle frames CH/172/3 ISO/IEC Information technology. Conformance testing for the biometric application programming interface (BioAPI). Test assertions for biometric service providers will supersede BS ISO/IEC :2007 IST/44 ISO Geometrical product specifications (GPS). Surface texture. Areal. XML file format x3p TDW/4 ISO/TS Information and documentation. RFID in libraries. Encoding of data elements based on rules from ISO/IEC in an RFID tag with partitioned memory IDT/2/7 ISO Information and documentation. RFID in libraries. Unique item identifier (UII) for libraries IDT/2/7 ISO/IEC Information technology. Biometric sample quality. Framework will supersede BS ISO/IEC :2009 IST/44 ISO/IEC TR Information technology. Biometric sample quality. Finger image data will supersede PD ISO/IEC TR :2010 IST/44 ISO/IEC TR Title missing IST/44 ISO/IEC Quality for learning, education and training. Fundamentals and vocabulary. General approach IST/43 ISO Communities sustainable development and resilience. Global city indicators for city services and quality of life SES/1/4 ISO/IEC Corporate governance of information technology will supersede BS ISO/IEC 38500:2008 IST/50 IEC :2006/A1 Electric cables. Calculation of the current rating. Current rating equations (100% load factor) and calculation of losses. General GEL/20/16 IEC :1994+A2:2006/A3 Electric cables. Calculation of the current rating. Thermal resistance. Calculation of thermal resistance GEL/20/16 IEC/TR Measurement of internal electric field in insulating materials used by pressure wave propagation method GEL/112 DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT NATIONAL BRITISH STANDARDS You may comment online on any British Standard of national origin using the BSI Draft Review system. All you need to do is register at This service is free of charge. Deadlines for receipt of comments on each of the individual drafts can be found at The deadline for the following drafts is 31 December, 2012 unless otherwise stated. If you would like to receive these drafts in hard copy format, they are available for a fee from BSI Customer Services (see How to order on page 2). 12/ DC BS 7910 Guide to acceptable flaws in metallic structures members, non-members WEE/37 12/ DC BS 8602 Method for assessment of fire integrity of cast resin busbar systems for the safety critical power distribution to life safety and fire fighting systems FSH/25 12/ DC BS Designing for material efficiency in building projects. Code of practice for appraisal and strategic briefing B/ January, / DC BS 3969 A1 Recommendations for turf for general purposes AW/20 11 January, / DC BS Testing hardened concrete. Determination of the potential carbonation resistance of concrete. Accelerated carbonation method B/517/1 12/ DC BS S 536 A2 Specification for low carbon 18/10 chromium-nickel corrosion-resisting steel sheet and strip (500 MPa) ACE/61 11 January, / DC BS S 537 A2 Specification for low carbon 17/12 chromium-nickel-molybdenum corrosionresisting steel sheet and strip (500 MPa) 11 January, / DC BS 8561 Mechanical fittings for use in the repair, connection and renovation of pressurized water supply pipelines. Specification B/ November, 2012 Please do not send confirmation of orders placed by telephone as it can lead to duplication Update Standards November 2012 Prices may be subject to change. 51

52 Drafts for Public Comment continued... DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT ADOPTIONS You may comment online on draft standards issued by CEN and ISO. The BSI Draft Review system has been modified to accommodate a wider range of standards content. The purpose of the website is to enhance access to Drafts for Public Comment for the wider community, make comments more visible and move into collaborative working practices. All you need to do is register at This service is free of charge. Please note that CENELEC and IEC standards are not included on the BSI Draft Review system at this time, but are available in hard copy format from BSI Customer Services. All draft British Standards are available in hard copy format from BSI Customer Services (see How to order on page 2). Most drafts are charged at to members and for non-members. Larger draft documents are charged at a higher price according to the number of pages and, are priced individually below. Comments on all Draft British Standards are welcome and should be sent to Debbie Stead, Head of Committee Service Centre and International Secretariat ñ BSI Group, 389 Chiswick High Road, London W4 4AL by 31 December, 2012 unless otherwise stated, to be considered by the relevant BSI committee. Draft standards may be modified before adoption and issue as British Standards. 12/ DC BS ISO Gaseous hydrogen. Cylinders and tubes for stationary storage PVE/3/8 27 November, / DC BS EN ISO Microbiology of food, animal feeding stuffs and water. Preparation production, storage and performance testing of culture media members, non-members AW/9 5 December, / DC BS ISO/IEC Information technology. Security techniques. Vulnerability disclosure IST/33 27 November, / DC BS ISO Textiles. Determination of the content of phthalates TCI/80 10 December, / DC BS EN ISO 6808 Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids. Specification PRI/66 12/ DC BS ISO Security management systems for the supply chain. Electronic port clearance (EPC). Message structures SME/32 20 November, / DC BS ISO Road vehicles. Unified diagnostic services (UDS). UDS on K-Line implementation (UDSonK-Line) AUE/16 27 November, / DC BS ISO Meters for irrigation water. General requirements CPI/30/7 20 November, / DC BS EN ISO Water quality. Requirements for the comparison of the relative recovery of microorganisms by two quantitative methods EH/3/4 1 February, / DC BS EN ISO Sterilization of health care products. Chemical indicators. General requirements LBI/35 30 November, / DC BS ISO Metric series wires for measuring screw threads FME/9 20 November, / DC BS ISO Graphic technology. Prepress digital data exchange. Scene-referred standard colour image data (RIMM/SCID) PAI/43 9 November, / DC BS ISO Measurement of radioactivity in the environment. Air. Radon-222. Method for determining exhalation rate of dense building materials NCE/2 20 November, / DC BS EN Maritime navigation and radiocommunication equipment and systems. Shipborne radar. Performance requirements, methods of testing and required test results members, non-members EPL/80 12/ DC BS ISO Ships and marine technology. Marine environment protection. Arrangement and management of port waste reception facilities SME/32/-/2 27 November, / DC BS EN Medical electrical equipment. Particular requirements for basic safety and essential performance of X-ray Based Image Guided Radiotherapy Equipment for use with electron accelerators, light ion beam therapy systems and radionuclide beam therapy systems CH/62/3 14 November, / DC BS ISO/IEC Information technology. Keyboard layouts for text and office systems. Multilingual-usage, multiscript keyboard group layouts members, non-members ICT/-/6 27 November, / DC BS EN LPG equipment and accessories. Transportable refillable welded steel cylinders for LPG. Alternative design and construction PVE/19 12/ DC BS ISO Industrial trucks. Verification of stability. Pedestrian-propelled trucks MHE/7 27 November, / DC BS EN ISO Soil quality. Inhibition of reproduction of Collembola (Folsomia candida) by soil pollutants EH/4 13 January, Update Standards November 2012 Prices may be subject to change.

53 12/ DC BS ISO Fire resistance tests. Elements of building construction. Specific requirements for the assessment of fire protection to structural steel elements FSH/22/-/2 27 November, / DC BS ISO Protective clothing for firefighters. Laboratory test methods and performance requirements. Compatibility PH/14 7 December, / DC BS EN Radionuclide imaging devices. Characteristics and test conditions. Positron emission tomographs CH/62/3 14 November, / DC BS EN Medical electrical equipment. Particular requirements for the basic safety and essential performance of extracorporeally induced lithotripsy CH/62/4 14 November, / DC BS ISO Milk and milk products. Determination of alkaline phosphatase activity. Fluorimetric method for milk and milk-based drinks AW/5 12/ DC BS ISO/IEC A6 Information technology. JPEG 2000 image coding system. Core coding system IST/37 10 December, / DC BS EN ISO Determination of individual and total sterols contents. Gas chromatographic method. Olive and olive pomace oils AW/307 12/ DC BS ISO Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE). Pipes PRI/88/2 20 November, / DC BS ISO Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE). Fittings PRI/88/2 20 November, / DC BS ISO Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE). Fitness for purpose PRI/88/2 20 November, / DC BS ISO/ASTM Practice for dosimetry in a gamma irradiation facility for radiation processing NCE/2 20 November, / DC BS ISO/ASTM Guide for dosimetry for sterile insects release programs NCE/2 20 November, / DC BS ISO Determination of organonitrogen compounds in air using liquid chromatography and mass spectrometry. Isocyanates using dibutylamine derivatives EH/2/2 27 November, / DC BS ISO Determination of organonitrogen compounds in air using liquid chromatography and mass spectrometry. Amines and aminoisocyanates using dibutylamine and ethyl chloroformate derivatives EH/2/2 27 November, / DC BS ISO Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE). General PRI/88/2 20 November, / DC BS ISO Pulps. Determination of fibre length by automated optical analysis. Polarized light method PAI/11 20 November, / DC BS ISO Pulps. Determination of water retention value (WRV) PAI/11 20 November, / DC BS ISO Pulps. Determination of fibre length by automated optical analysis. Unpolarized light method PAI/11 20 November, / DC BS ISO/IEC Cartridge Characterization Standard. General. Terms, symbols and notations IST/3 20 November, / DC BS ISO/IEC Print Cartridge Characterization. Cartridge Characterization Data Reporting IST/3 20 November, / DC BS EN Semiconductor devices. Semiconductor interface for human body communication. General requirements EPL/47 3 December, / DC BS ISO Fire resistance tests. Elements of building construction. Specific requirements to determine the contribution of applied fire protection materials to structural elements FSH/22/-/12 27 November, / DC BS ISO Definition of the Technology Readiness Levels (TRL) and their criteria of assessment ACE/68/-/5 27 November, / DC BS ISO Tractors and machinery for agriculture and forestry. Serial control and communications data network. Task controller and management information system data interchange members, non-members AGE/6 16 November, / DC BS EN Slow release appliances fired by solid fuel. Requirements and test methods members, non-members RHE/28 Update Standards November 2012 Prices may be subject to change. 53

54 Drafts for Public Comment continued... 12/ DC BS ISO 9660 A1 Information processing. Volume and file structure of CD-ROM for information interchange ICT/-/1 27 November, / DC BS ISO Protective clothing for firefighters. Laboratory test methods and performance requirements. Gloves PH/14 7 December, / DC BS EN Semiconductor devices. Semiconductor interface for human body communication. Characterization of interfacing performances EPL/47 3 December, / DC BS EN ISO Leather. Determination of ethoxylated alkylphenols. Direct method TCI/69 12/ DC BS EN ISO Leather. Determination of ethoxylated alkylphenols. Indirect method TCI/69 12/ DC BS ISO Geometrical Product Specification (GPS). Filtration. Linear areal filters. Basic concepts TDW/4 3 December, / DC BS ISO Geometrical Product Specification (GPS). Filtration. Linear areal filters. Gaussian filters TDW/4 3 December, / DC BS ISO A1 Sensory analysis. Methodology. Magnitude estimation method AW/12 13 November, / DC BS EN Fully supported metal sheet and strip for roofing, external cladding and internal lining. Product specification and requirements B/542/6 10 December, / DC BS ISO Thermoplastic multi-layer (nonvulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals. Specification PRI/66 13 November, / DC BS ISO Thermoplastic multi-layer (nonvulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas. Specification PRI/66 13 November, / DC BS ISO Road vehicles. Connection interface for pyrotechnic devices, two-way and three-way connections. Test methods and general performance requirements AUE/16 27 November, / DC BS EN Cranes. General design. Limit states and proof of competence of wire ropes in reeving systems MHE/3/1 31 January, / DC BS EN Firefighters helmets. Helmets for wildland fire fighting PH/6/3 2 January, / DC BS EN Firefighters helmets. Helmets for technical rescue PH/6/3 2 January, / DC BS EN Geosynthetics. Determination of the pyramid puncture resistance of supported geosynthetics B/ November, / DC BS EN LPG equipment and accessories. Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG) PVE/19 31 January, / DC BS EN ISO A1 Small craft. Hull construction and scantlings. Design pressures for monohulls, design stresses, scantlings determination GME/33 31 January, / DC BS ISO Tools for pressing. Cam driver plates MTE/12 20 November, / DC BS ISO 8404 Tools for moulding. Angle pins MTE/12 20 November, / DC BS ISO 8405 Tools for moulding. Ejector sleeves with cylindrical head. Basic series for general purposes MTE/12 20 November, / DC BS EN Specification for ancillary components for masonry. Lintels B/519/3 31 January, / DC BS EN Specification for ancillary components for masonry. Wall ties, tension straps, hangers and brackets B/519/3 31 January, / DC BS EN Specification for ancillary components for masonry. Bed joint reinforcement of steel meshwork B/519/3 31 January, / DC BS EN Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)). Test methods for characterisation of compounds and products PRI/42 12/ DC BS EN Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)). Specifications for decking profiles and tiles PRI/42 54 Update Standards November 2012 Prices may be subject to change.

55 12/ DC BS EN Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)). Specifications for cladding profiles and tiles PRI/42 12/ DC BS ISO 8243 Cigarettes. Sampling AW/40 20 November, / DC BS EN ISO Dentistry. Base polymers. Orthodontic base polymers CH/106/2 16 November, / DC BS EN Glass in building. Painted glass for internal use. Evaluation of conformity B/520/1 23 November, / DC BS EN Glass in building. Painted glass for internal use. Requirements B/520/1 23 November, / DC BS EN Medical vehicles and their equipment. Air ambulances. Operational and technical requirements of air ambulances CH/239 12/ DC BS ISO Passenger car tyres and rims. Rims AUE/4 20 November, / DC BS EN Mobile fire extinguishers. Requirements for the assembly, construction and pressure resistance of CO 2 extinguishers which comply with the requirements of EN FSH/2 31 January, / DC BS EN Products used for treatment of water intended for human consumption. Natural Zeolite CII/59 12/ DC BS EN Timber stairs. Structural design. Calculation method B/ November, / DC BS EN Gas-fired domestic appliance producing hot water. Assessment of energy consumption of gas fired appliances combined with electrical heat pump GSE/29 12/ DC BS EN Gas-fired central heating boilers. Specific standard for type B1 appliances of a nominal heat input not exceeding 70 kw GSE/29 12/ DC BS EN 1643 Valve proving systems for automatic shut-off valves for gas burners and gas appliances GSE/22 12/ DC BS EN Clay roofing tiles for discontinuous laying. Determination of physical characteristics. Test for frost resistance B/542/3 12/ DC BS EN A2 Floating leisure articles for use on and in the water. Classification, materials, general requirements and test methods SW/136/8 12/ DC BS EN A2 Floating leisure articles for use on and in the water. Consumer information SW/136/8 30 November, / DC BS EN A1 Floating leisure articles for use on and in the water. Additional specific safety requirements and test methods for Class D devices SW/136/8 30 December, / DC BS EN Chemicals used for treatment of swimming pool water. Sodium hydrogen carbonate CII/59 12/ DC BS EN Founding. Continuous cast iron bars ISE/111 12/ DC BS EN 1109 Flexible sheets for waterproofing. Bitumen sheets for roof waterproofing. Determination of flexibility at low temperature B/546 12/ DC BS EN Leather. Labelling of leather trims in textile products TCI/69 12/ DC BS EN Leather. Guidelines for the determination of the origin of leather TCI/69 12/ DC BS EN Passive filter units for electromagnetic interference suppression. Standard for passive filter units for which safety tests are appropriate EPL/40X 16 November, / DC BS ISO/IEC Web Services Description Language (WSDL) for CSTA Phase III members, non-members ICT/-/1 20 November, / DC BS ISO A1 Animal feeding stuffs. Determination of zearalenone by immunoaffinity column chromatography and high performance liquid chromatography AW/10 20 November, / DC BS ISO Imaging materials. Digital hard copy for medical imaging. Methods of measuring permanence CPW/42 20 November, / DC BS EN Acoustics. Test code for suspended ceilings. Sound absorption EH/1/6 7 January, / DC BS EN Playground equipment and surfacing. Additional specific safety requirements and test methods for spatial network SW/65 Update Standards November 2012 Prices may be subject to change. 55

56 Drafts for Public Comment continued... 12/ DC BS EN 748 Playing field equipment. Football goals. Functional and safety requirements, test methods SW/136/22 12/ DC BS EN Protective clothing against solid, liquid and gaseous chemicals, including liquid and solid aerosols. Performance requirements for gas-tight (Type 1) chemical protective suits for emergency teams (ET) PH/3/3 2 January, / DC BS EN AA Basic standard for the in-situ measurement of electromagnetic field strength related to human exposure in the vicinity of base stations GEL/106 12/ DC BS EN Information technology. Premises distribution access network (PDAN) cabling to support deployment of optical broadband networks TCT/7 8 January, / DC BS EN ISO Thermal spraying. Wires, rods and cords for flame and arc spraying. Classification. Technical supply conditions STI/40 12/ DC BS ISO Motorcycles. Measurement methods for gaseous exhaust emissions during inspection or maintenance AUE/14 20 November, / DC BS EN 958 Mountaineering equipment. Energy absorbing systems for use in klettersteig (via ferrata) climbing. Safety requirements and test methods SW/136/5 31 January, / DC BS EN Flexible sheets for waterproofing. Determination of foldability at low temperature. Plastic and rubber sheets for roof waterproofing B/ January, / DC BS EN 1844 Flexible sheets for waterproofing. Determination of resistance to ozone. Plastic and rubber sheets for roof waterproofing B/ January, / DC BS EN Flexible sheets for waterproofing. Determination of peel resistance of joints. Plastic and rubber sheets for roof waterproofing B/ January, / DC BS EN Flexible sheets for waterproofing. Determination of tensile properties. Plastic and rubber sheets for roof waterproofing B/ January, / DC BS EN ISO/IEC A1 Medical devices. Application of usability engineering to medical devices CH/62/1 7 December, / DC BS ISO Quality management systems. Guidelines for the application of ISO 9001:2008 in local government QS/-/-/1 13 December, / DC BS EN A1 Medical electrical equipment. General requirements for basic safety and essential performance. Collateral standard. Requirements for the development of physiologic closed-loop controllers CH/62/1 7 December, / DC BS EN A3 Household and similar electrical appliances. Safety. Particular requirements for shavers, hair clippers and similar appliances CPL/61/1 12/ DC BS IEC Plugs and socket-outlets for domestic and similar general use standardized in member countries of IEC members, non-members PEL/23 12/ DC BS EN Aerospace series. Connectors, single-way with triaxial interface, for transmission of digital data. Solder plug. Product standard ACE/6 11 December, / DC BS EN Powertrack systems. Particular requirements for powertrack systems intended for on floor or under floor installation PEL/ November, / DC BS EN Application integration at electric utilities. System interfaces for distribution management. Interfaces for maintenance and construction PEL/57 12/ DC BS ISO Graphic technology. Process control for the production of half-tone colour separations, proof and production prints. Offset lithographic processes PAI/43 12/ DC BS ISO Graphic technology. Process control for the production of half-tone colour separations, proof and production prints. Parameters and measurement methods PAI/43 12/ DC BS EN Thermal-links. Requirements and application guide PEL/32 12/ DC BS EN Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Screen testing of return loss of single mode PC optical fibre connectors GEL/86/2 15 November, / DC BS EN Fibre optic interconnecting devices and passive components. Fibre optic connector optical interfaces. Optical interfaces for single mode non-dispersion shifted fibres. General and guidance GEL/86/2 19 November, Update Standards November 2012 Prices may be subject to change.

57 12/ DC BS EN Fibre optic interconnecting devices and passive components. Fibre optic connector optical interfaces. Connection of non-dispersion shifted single mode angled physically contacting fibres GEL/86/2 19 November, / DC BS EN Fibre optic interconnecting devices and passive components. Fibre optic connector optical interfaces. Connectors with 2,5 mm and 1,25 mm diameter cylindrical full zirconia ferrule, non-angled single mode nondispersion shifted fibres GEL/86/2 19 November, / DC BS EN 4122 Aerospace series. Shank nuts, selflocking, in heat resisting steel FE-PA2601 (A286), silver plated on thread. Classification MPa (at ambient temperature)/650ºc 12/ DC BS EN 4013 Aerospace series. Shank nuts, selflocking, in heat resisting nickel base alloy NI- PH2601 (Inconel 718), silver plated. Classification MPa (at ambient temperature)/600ºc 12/ DC BS EN 4123 Aerospace series. Shank nuts, selflocking, in heat resisting nickel base alloy NI- P100HT (Inconel 718), silver plated on thread. Classification MPa (at ambient temperature)/600ºc 12/ DC BS EN 4124 Aerospace series. Shank nuts, selflocking, in heat resisting nickel base alloy NI- PH1302 (Waspaloy), silver plated on thread, for 60º swage. Classification MPa (at ambient temperature)/730ºc 12/ DC BS EN ISO Geometrical product specifications (GPS). Masterplan TDW/4 12/ DC BS EN 6XXXX-1 Electric motor-operated handheld, transportable tools and lawn and garden machinery. Safety. General requirements (supersedes BS EN :2009+A11:2010) members, non-members CPL/ January, / DC PD IEC/TR Electrical accessories. Harmonization of general rules PEL/23 11 December, 2012 DOCUMENTS NOT ISSUED AS DPCs Comments can be sent by or by post to named contacts at: BSI Group 389 Chiswick High Road London W4 4AL Tel: EN 415-6:2006+A1:2009 Safety of packaging machines. Pallet wrapping machines This standard has been revised to take account of comments. It has now been submitted for combined enquiry/formal vote under the CEN Unique Acceptance Procedure. The closing date for comments is 31 January, A copy of the draft is available on request under document reference MCE/3/3. Contact: Anita Attra anita.attra@bsigroup.com MCE/3/3 EN ISO 340 Conveyor belts. Laboratory scale flammability characteristics. Requirements and test method PRI/67 EN ISO Conveyor belts. Specification for rubber or plastics covered conveyor belts of textile construction for general use Copies of the above documents are available from the contact point (below). Contact: Committee Service Centre csc@bsigroup.com PRI/67 ISO/DIS Plastics. Development and use of intermediatescale fire tests for plastics products. General guidance The following draft has been circulated, copies of which are available from the Programme Manager (below). Contact: Alex Price alex.price@bsigroup.com PRI/26 ISO/DIS Plastics. Burning behaviour. Intermediate-scale fire-resistance testing of fibre-reinforced polymer composites The following draft has been circulated, copies of which are available from the Programme Manager (below). Contact: Alex Price alex.price@bsigroup.com PRI/26 ISO Surface chemical analysis. X-ray photoelectron spectroscopy. Reporting of results for thin film analysis This document is currently out for public comment, copies are available from the Programme Manager (below). Contact: Christopher Smith christopher.smith@bsigroup.com CII/60 CEN EUROPEAN STANDARDS EUROPEAN RATIFIED TEXTS The documents listed below have recently been issued by CEN but have not yet been published as BS ENs. BSI has an obligation to adopt all ENs and to withdraw any conflicting British Standards (BSs) or parts of BSs. The following will be implemented as BS ENs or as amendments to BS ENs shortly. Notification of their implementation will be given in the BS EN Publications section of the relevant edition of Update Standards. EN 636:2012 Plywood. Specifications B/541 EN 848-1:2007+A2:2012 Safety of woodworking machines. One side moulding machines with rotating tool. Single spindle vertical moulding machines MTE/23 EN 848-2:2007+A2:2012 Safety of woodworking machines. One side moulding machines with rotating tool. Single spindle hand fed/integrated fed routing machines MTE/23 EN :2002+A2:2012 Safety of woodworking machines. Circular sawing machines. Circular sawbenches/upcutting cross-cut sawing machines MTE/23 EN 4268:2012 Aerospace series. Metallic materials. Heat treatment facilities. General requirements ACE/61 EN :2012 Aerospace series. LOTAR. Long term archiving and retrieval of digital technical product documentation such as 3D, CAD and PDM data. Fundamentals and concepts ACE/1 EN :2012 Testing hardened concrete. Shape, dimensions and other requirements for specimens and moulds B/517/1 Update Standards November 2012 Prices may be subject to change. 57

58 CEN European Standards continued... EN :2012 Testing concrete in structures. Non-destructive testing. Determination of rebound number B/517/1 EN :2012 Open data communication in building automation, controls and building management. Home and building electronic system. Product and system requirements RHE/16 EN :2012 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware. Fire resistance of hinged and pivoted steel doorsets FSH/22/-/5 EN 16101:2012 Water quality. Guidance standard on interlaboratory comparison studies for ecological assessment EH/3/5 EN :2012 Pyrotechnic articles. Theatrical pyrotechnic articles. Terminology CII/47 EN :2012 Pyrotechnic articles. Theatrical pyrotechnic articles. Categories of theatrical pyrotechnic articles CII/47 EN 16257:2012 Tanks for the transport of dangerous goods. Service equipment. Footvalve sizes other than 100 mm dia (nom) AUE/18 Help Us to Help You! Always quote your Customer Number Don t know your number? Contact Customer Services who will be happy to check it for you EN 31092: (ISO 11092:1993/A1:2012) Textiles. Physiological effects. Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guardedhotplate test) AMENDMENT 1:September 2012 to EN 31092:1993 TCI/24 CEN WORKSHOP AGREEMENTS CWA 16505:2012 Container Security & Tracking Devices. Technical Specifications and Communication Standards members, non-members CEN REPORTS CEN/TR :2012 Oil spill identification. Waterborne petroleum and petroleum products. Analytical methodology and interpretation of results based on GC-FID and GC-MS low resolution analyses PTI/12 CEN/TR 16369:2012 Use of control charts in the production of concrete B/517/1 CEN/TR 16391:2012 Mechanical vibration and shock. Handtransmitted vibration. Influence of coupling forces at the hand-machine interface on exposure evaluation GME/21/6 CEN/TR 16395:2012 Gas Infrastructure. CEN/TC 234 Pressure Definitions. Guideline Document GSE/33 CEN/TR 16411:2012 Child use and care articles compiled interpretations of CEN/TC 252 standards CW/1/2 CEN TECHNICAL SPECIFICATIONS CEN/TS :2012 Durability of wood and wood-based products. Determination of emissions from preservative treated wood to the environment. Wooden commodities exposed in Use Class 4 or 5 (in contact with the ground, fresh water or sea water). Laboratory method B/515 CEN/TS 15940:2012 Automotive fuels. Paraffinic diesel fuel from synthesis or hydrotreatment. Requirements and test methods PTI/2 CEN/TS 16346:2012 Bituminous binders. Determination of breaking behaviour and immediate adhesivity of cationic bituminous emulsions with 2/4 mm aggregate PTI/13 CENELEC PUBLICATIONS EUROPEAN RATIFIED TEXTS The documents listed below have recently been issued by CENELEC but have not yet been published as BS ENs. BSI has an obligation to adopt all ENs and to withdraw any conflicting British Standards (BSs) or parts of BSs. The following will be implemented as BS ENs or as amendments to BS ENs shortly. Notification of their implementation will be given in the BS EN Publications section of the relevant edition of Update Standards. EN : Railway applications. Fixed installations. Electrical safety, earthing and the return circuit. Protective provisions against electric shock CORRIGENDUM 1:September 2012 to EN :2011 GEL/9/3 EN :2012 Alarm systems. Intrusion and hold-up systems. Intrusion detectors. Glass break detectors (acoustic) GW/1 EN :2012 Alarm systems. Intrusion and hold-up systems. Intrusion detectors. Glass break detectors (passive) GW/1 EN :2012 Alarm systems. Intrusion and hold-up systems. Intrusion detectors. Glass break detectors (active) GW/1 EN 50242: (IEC 60436:2004/A2:2012) Electric dishwashers for household use. Methods for measuring the performance AMENDMENT 11:September 2012 to EN 50242:2008 CPL/59/1 EN :2012 (IEC :2012) Power transformers. Measurement of frequency response PEL/14 58 Update Standards November 2012 Prices may be subject to change.

59 EN :2012 (IEC :2009) Fixed resistors for use in electronic equipment. Sectional specification. Fixed surface mount resistors EPL/40X EN 60294:2012 (IEC 60294:2012) Measurement of the dimensions of a cylindrical component with axial terminations EPL/40X EN 60301:2012 (IEC 60301:2012) Preferred diameters of wire terminations of capacitors and resistors EPL/40X EN : Household and similar electrical appliances. Safety. Particular requirements for vacuum cleaners and water-suction cleaning appliances AMENDMENT 11:September 2012 to EN :2010 CPL/61/1 EN : (IEC :2008/A1:2012) Combined flexible materials for electrical insulation. Specifications for individual materials AMENDMENT 1:September 2012 to EN :2008 GEL/15/10 EN 60734:2012 (IEC 60734:2012) Household electrical appliances. Performance. Water for testing CPL/59/1 EN :2012 (IEC :2012) Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Specifications for individual materials. Types of industrial rigid laminated sheets GEL/15/6 EN :2012 (IEC :2012) Modular order for the development of mechanical structures for electronic equipment practices. Sectional specification. Interface coordination dimensions for the 25 mm equipment practice. Cabinet interface dimensions for miscellaneous equipment EPL/48 EN : (IEC :2009/A1:2012) Low-voltage switchgear and controlgear. Contactors and motor-starters. Electromechanical contactors and motor-starters AMENDMENT 1:September 2012 to EN :2010 PEL/17/2 EN 61240:2012 (IEC 61240:2012) Piezoelectric devices. Preparation of outline drawings of surface-mounted devices (SMD) for frequency control and selection. General rules EPL/49 EN :2012 (IEC :2012) Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Assembly and disassembly of fibre optic mechanical splices, fibre management systems and closures GEL/86/2 EN :2012 (IEC :2012) Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces. Type SF connector family GEL/86/2 EN :2012 (IEC :2012) Superconductivity. AC loss measurements. Magnetometer methods for hysteresis loss in superconducting multifilamentary composites L/-/90 EN :2012 (IEC :2012) Passive RF and microwave devices, intermodulation level measurement. Measurement of passive intermodulation in coaxial connectors EPL/46 EN :2012 (IEC :2012) Passive RF and microwave devices, intermodulation level measurement. Measurement of passive intermodulation in coaxial cables EPL/46 EN 62115: Electric toys. Safety AMENDMENT 11:September 2012 to EN 62115:2005 CPL/61/21 EN :2012 (IEC :2012) Fibre optic active components and devices. Test and measurement procedures. Optical power variation induced by mechanical disturbance in optical receptacles and transceiver interfaces GEL/86/3 EN :2012 (IEC :2012) Organic light emitting diode (OLED) displays. Measuring methods of image quality EPL/47 EN :2012 (IEC :2012) Industrial communication networks. High availability automation networks. Parallel Redundancy Protocol (PRP) and High-availability Seamless Redundancy (HSR) AMT/7 EN :2012 (IEC :2012) Safety requirements for power electronic converter systems and equipment. General PEL/22 EN :2012 (IEC :2012) OPC unified architecture. Profiles AMT/7 EN :2012 (IEC :2012) Radio frequency (RF) bulk acoustic wave (BAW) filters of assessed quality. Guidelines for the use EPL/49 EN 62585:2012 (IEC 62585:2012) Electroacoustics. Methods to determine corrections to obtain the free-field response of a sound level meter EPL/29 EN 62628:2012 (IEC 62628:2012) Guidance on software aspects of dependability DS/1 IEC PUBLICATIONS It is BSI policy to supply the UK version of all adopted standards, which are published as British standards, unless otherwise requested. The following IEC publications are available from BSI Customer Services (see How to order on page 2) IEC :2012 Rotating electrical machines. Functional evaluation of insulation systems. Test procedures for wire-wound windings. Thermal evaluation and classification members, non-members PEL/2 IEC : Lamp caps and holders together with gauges for the control of interchangeability and safety. Lamp caps AMENDMENT 48:September 2012 to IEC : members, non-members CPL/34/2 Update Standards November 2012 Prices may be subject to change. 59

60 IEC Publications continued... IEC : Lamp caps and holders together with gauges for the control of interchangeability and safety. Lampholders AMENDMENT 45:September 2012 to IEC : members, non-members CPL/34/2 IEC : Lamp caps and holders together with gauges for the control of interchangeability and safety. Gauges AMENDMENT 46:September 2012 to IEC : members, non-members CPL/34/2 IEC :2012 Explosive atmospheres. Equipment protection by special protection s members, non-members EXL/31 IEC : Mechanical standardization of semiconductor devices. Dimensions AMENDMENT 19:October 2012 to IEC : members, non-members EPL/47 IEC : Household and similar electrical appliances. Safety. Particular requirements for washing machines CORRIGENDUM 1:September 2012 to IEC :2008 CPL/61/14 IEC :2012 Magnetic materials. Methods for the determination of the relative magnetic permeability of feebly magnetic materials members, non-members ISE/108 IEC 60571:2012 (Edition 3) Railway applications. Electronic equipment used on rolling stock members, non-members GEL/9 IEC :2012 Medical electrical equipment. Particular requirements for the basic safety and essential performance of dental extra-oral X-ray equipment members, non-members CH/62/2 IEC :2012 Medical electrical equipment. Particular requirements for the basic safety and essential performance of dental intra-oral X-ray equipment members, non-members CH/62/2 IEC :2012 Medical electrical equipment. Particular requirements for the basic safety and essential performance of hearing instruments and hearing instrument systems members, non-members EPL/29 IEC : Semiconductor devices. Mechanical and climatic test methods. Electrostatic discharge (ESD) sensitivity testing. Machine model (MM) AMENDMENT 1:September 2012 to IEC : members, non-members EPL/47 IEC : Low-voltage switchgear and controlgear. Control circuit devices and switching elements. Proximity switches AMENDMENT 1:September 2012 to IEC : members, non-members PEL/17/2 IEC 60968:2012 Self-ballasted lamps for general lighting services. Safety requirements members, non-members CPL/34/1 IEC : Electromagnetic compatibility (EMC). Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current > 16 A and 75 A per phase INTERPRETATION SHEET 1:September 2012 IEC :2011 GEL/210/12 IEC :2012 (Edition 3) Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement members, non-members EPL/66 IEC :2012 Measurement microphones. Methods for determining the free-field sensitivity of working standard microphones by comparison members, non-members EPL/29 IEC :2012 Programmable controllers. Functional safety members, non-members GEL/65/2 IEC :2012 Coaxial communication cables. Electrical test methods. RF power rating members, non-members EPL/46 IEC :2012 Coaxial communication cables. Blank detail specification for CATV trunk and distribution cables members, non-members EPL/46 IEC :2012 Coaxial communication cables. Sectional specification for CATV trunk and distribution cables members, non-members EPL/46 IEC :2012 Coaxial communication cables. Detail specification for type semi-flexible cables with solid polytetrafluoroethylene (PTFE) insulation members, non-members EPL/46 IEC :2012 Coaxial communication cables. Detail specification for type semi-flexible cables with solid polytetrafluoroethylene (PTFE) insulation members, non-members EPL/46 IEC :2012 Coaxial communication cables. Detail specification for type semi-flexible cables with solid polytetrafluoroethylene (PTFE) insulation members, non-members EPL/46 IEC :2012 Coaxial communication cables. Detail specification for type semi-flexible cables with solid polytetrafluoroethylene (PTFE) insulation members, non-members EPL/46 IEC :2012 Coaxial communication cables. Detail specification for type semi-flexible cables with solid polytetrafluoroethylene (PTFE) insulation members, non-members EPL/46 IEC :2012 Coaxial communication cables. Detail specification for type semi-flexible cables with solid polytetrafluoroethylene (PTFE) insulation members, non-members EPL/46 60 Update Standards November 2012 Prices may be subject to change.

61 IEC :2012 Coaxial communication cables. Detail specification for type semi-flexible cables with solid polytetrafluoroethylene (PTFE) insulation members, non-members EPL/46 IEC :2012 Coaxial communication cables. Detail specification for type semi-flexible cables with solid polytetrafluoroethylene (PTFE) insulation members, non-members EPL/46 IEC 61199: Single-capped fluorescent lamps. Safety specifications AMENDMENT 1:September 2012 to IEC 61199: members, non-members CPL/34/1 IEC :2012 Electrical equipment for measurement, control and laboratory use. EMC requirements. Particular requirements. Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications members, non-members GEL/65/1 IEC :2012 Electrical equipment for measurement, control and laboratory use. EMC requirements. Particular requirements. Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems members, non-members GEL/65/1 IEC :2012 Electrical equipment for measurement, control and laboratory use. EMC requirements. Particular requirements. Test configurations, operational conditions and performance criteria for field devices with field bus interfaces according to IEC members, non-members GEL/65/1 IEC :2012 (Edition 3) Standard data element types with associated classification scheme for electric components. EXPRESS dictionary schema members, non-members GEL/3 IEC :2012 Liquid crystal display devices. Liquid crystal display modules and cells. Essential ratings and characteristics members, non-members EPL/47 IEC :2012 Instrument transformers. Additional requirements for current transformers members, non-members PEL/38 IEC 62075:2012 Audio/video, information and communication technology equipment. Environmentally conscious design members, non-members EPL/108 IEC/TR 62130:2012 Climatic field data including validation members, non-members GEL/104 IEC 62217:2012 Polymeric HV insulators for indoor and outdoor use. General definitions, test methods and acceptance criteria members, non-members PEL/36 IEC : High-voltage switchgear and controlgear. Alternating current circuit-breakers AMENDMENT 1:September 2012 to IEC : members, non-members PEL/17/1 IEC :2012 High-voltage switchgear and controlgear. Alternating current switch-fuse combinations for rated voltages above 1 kv up to and including 52 kv members, non-members PEL/17/1 IEC :2012 (Edition 3) High-voltage switchgear and controlgear. Inductive load switching members, non-members PEL/17/1 IEC :2012 High-voltage switchgear and controlgear. Automatic circuit reclosers and fault interrupters for alternating current systems up to 38 kv members, non-members PEL/17/1 IEC :2012 Fuel cell technologies. Portable fuel cell power systems. Safety members, non-members GEL/105 IEC :2012 Process management for avionics. Atmospheric radiation effects. Guidelines for single event effects testing for avionics systems members, non-members GEL/107 IEC 62512:2012 Electric clothes washer-dryers for household use. Methods for measuring the performance members, non-members CPL/59/1 IEC 62551:2012 Analysis techniques for dependability. Petri net techniques members, non-members DS/1 IEC :2012 LCD backlight unit. Electro-optical measurement methods of LED backlight unit members, non-members EPL/47 IEC 62646:2012 Nuclear power plants. Control rooms. Computer based procedures members, non-members NCE/8 IEC/TS :2012 Process management for avionics. Aerospace and defence electronic systems containing leadfree solder. Preparation for a lead-free control plan members, non-members GEL/107 IEC/TS 62743:2012 Radiation protection instrumentation. Electronic counting dosemeters for pulsed fields of ionizing radiation members, non-members NCE/2 IEC/TR 62781:2012 Ultrasonics. Conditioning of water for ultrasonic measurements members, non-members EPL/87 CISPR 32: Electromagnetic compatibility of multimedia equipment. Emission requirements CORRIGENDUM 2:August 2012 to CISPR 32:2012 GEL/210/11 Update Standards November 2012 Prices may be subject to change. 61

62 ISO Publications ISO PUBLICATIONS It is BSI policy to supply the UK version of all adopted standards, which are published as British standards, unless otherwise requested. The following ISO publications are available from BSI Customer Services (see How to order on page 2) ISO 105-A11:2012 Textiles. Tests for colour fastness. Determination of colour fastness grades by digital imaging techniques members, non-members TCI/81 ISO 251:2012 (Edition 4) Conveyor belts with textile carcass. Widths and lengths members, non-members PRI/67 ISO 683-1:2012 Heat-treatable steels, alloy steels and freecutting steels. Non-alloy steels for quenching and tempering members, non-members ISE/105 Will not be implemented as a British Standard ISO 683-2:2012 Heat-treatable steels, alloy steels and freecutting steels. Alloy steels for quenching and tempering members, non-members ISE/105 Will not be implemented as a British Standard ISO :2012 Heat-treatable steels, alloy steels and freecutting steels. Case-hardening steels members, non-members ISE/105 Will not be implemented as a British Standard ISO 927: Spices and condiments. Determination of extraneous matter and foreign matter content CORRIGENDUM 1:September 2012 to ISO 927:2009 AW/-/2 ISO 1120:2012 (Edition 4) Conveyor belts. Determination of strength of mechanical fastenings. Static test method members, non-members PRI/67 ISO 1342:2012 (Edition 3) Essential oil of rosemary (Rosmarinus officinalis L.) members, non-members AW/54 Will not be implemented as a British Standard ISO/IEC : Information technology. Programming languages. Fortran. Base language CORRIGENDUM 1:October 2012 to ISO/IEC :2010 IST/5 ISO 2400:2012 Non-destructive testing. Ultrasonic testing. Specification for calibration block No members, non-members WEE/46 ISO 3676:2012 Packaging. Complete, filled transport packages and unit loads. Unit load dimensions members, non-members PKW/0 ISO 3730:2012 (Edition 3) Shipbuilding and marine structures. Mooring winches members, non-members SME/32/-/4 ISO 4164:2012 Mopeds. Engine test code. Net power members, non-members AUE/14 ISO :2012 (Edition 3) Plain bearings. Hardness testing of bearing metals. Multilayer bearings materials members, non-members MCE/12 ISO :2012 Methods of test for full-flow lubricating oil filters for internal combustion engines. Static burst pressure test members, non-members MCE/21/5 ISO 5270:2012 (Edition 3) Pulps. Laboratory sheets. Determination of physical properties members, non-members PAI/11 ISO 5361:2012 Anaesthetic and respiratory equipment. Tracheal tubes and connectors members, non-members CH/121/5 ISO :2012 Geometrical product specifications (GPS). Surface texture. Profile method. Measurement standards. Software measurement standards members, non-members TDW/4 ISO 6165:2012 (Edition 6) Earth-moving machinery. Basic types. Identification and terms and definitions members, non-members B/513/1 ISO 6556:2012 Laboratory glassware. Filter flasks members, non-members LBI/36 ISO : Road vehicles. 60 V and 600 V single-core cables. Dimensions, test methods and requirements for copper conductor cables CORRIGENDUM 1:September 2012 to ISO :2011 AUE/16 ISO 6772:2012 (Edition 3) Aerospace. Fluid systems. Impulse testing of hydraulic hose, tubing and fitting assemblies members, non-members ACE/69 ISO :2012 (Edition 3) Plain bearings. Testing of the tribological behaviour of bearing materials. Testing of bearing metals members, non-members MCE/12 62 Update Standards November 2012 Prices may be subject to change.

63 BS ISO Start saving energy, money and the environment This standard will help you to run an efficient energy management system. These include energy policies, planning, legal requirements, as well as energy reviews, baseline and performance indicators. The standard also explains how to demonstrate competence, operational control and best practice procurement of energy services, products and equipment. Published in June 2011, ISO has experienced a rapid international uptake and is already implemented in 44 countries worldwide. This International Standard enables organizations to establish the systems and processes necessary to improve energy performance. At BSI we can also help you understand and embed energy management best practice with training and certification to prove your success with the Energy Reduction Kitemark. Are you ready to take the challenge? Standards BS ISO standard which lays out internationally recognized best practice. Training Start saving sooner and avoid common mistakes with the UK s leading energy management system trainers. Certification Reassure your stakeholders and embed best practice with energy management systems certification. Kitemark If you need to demonstrate success to your customers or to regulators, choose the UK s most trusted verification mark Discover how BS EN ISO is helping other organizations. Read the case studies shop.bsigroup.com/bsiso50001us1211 Buy your standard now shop.bsigroup.com/bsiso50001us1211 Read more at: shop.bsigroup.com/environmentalstandardsus1211 To contact us visit shop.bsigroup.com/bsiso50001us1211 or contact Customer Services quoting marketing reference code BSISO50001-US1211 T F orders@bsigroup.com shop.bsigroup.com/bsiso50001us1211 Standards and publications may also be ordered via the BSI shop at shop.bsigroup.com *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0) BSI British Standards Institution 2012

64 ISO Publications continued... ISO :2012 Plain bearings. Testing of the tribological behaviour of bearing materials. Testing of polymer-based bearing materials members, non-members MCE/12 ISO :2012 Wheelchairs. Requirements and test methods for stair-climbing devices members, non-members CH/173/1 ISO :2012 Rubber. Analysis by pyrolytic gaschromatographic methods. Determination of styrene/butadiene/isoprene ratio members, non-members PRI/23 ISO 8013:2012 (Edition 3) Rubber, vulcanized. Determination of creep in compression or shear members, non-members PRI/22 ISO 8039:2012 Microscopes. Values, tolerances and symbols for magnification members, non-members CPW/172 ISO :2012 (Edition 3) Safety of toys. Safety aspects related to mechanical and physical properties members, non-members CW/15 Will not be implemented as a British Standard Please do not send confirmation of orders placed by telephone as it can lead to duplication ISO : Infusion equipment for medical use. Check valves AMENDMENT 1:October 2012 to ISO : members, non-members CH/212 Will not be implemented as a British Standard ISO 8816: Aircraft. Solid-state remote power controllers. General requirements AMENDMENT 1:September 2012 to ISO 8816: members, non-members ACE/6 ISO/IEC : Information technology. ASN.1 encoding rules: Specification of Packed Encoding Rules (PER) CORRIGENDUM 2:September 2012 to ISO/IEC :2008 IST/6 Will not be implemented as a British Standard ISO 8843: Aircraft. Crimp-removable contacts for electrical connectors. Identification system AMENDMENT 1:September 2012 to ISO 8843: members, non-members ACE/6 ISO 9334:2012 (Edition 3) Optics and photonics. Optical transfer function. Definitions and mathematical relationships members, non-members CPW/172 ISO 9335:2012 Optics and photonics. Optical transfer function. Principles and procedures of measurement members, non-members CPW/172 ISO 9394:2012 (Edition 3) Ophthalmic optics. Contact lenses and contact lens care products. Determination of biocompatibility by ocular study with rabbit eyes members, non-members CH/172/9 ISO 9413: Tyre valves. Dimensions and designation AMENDMENT 1:October 2012 to ISO 9413: members, non-members AUE/4 ISO :2012 Soft soldering fluxes. Test methods. Flux efficacy test, solder spread method members, non-members NFE/27/4 ISO/IEC : Information technology. Open Systems Interconnection. The Directory: Models CORRIGENDUM 4:September 2012 to ISO/IEC :2005 IST/6 Will not be implemented as a British Standard ISO/IEC : Information technology. Open Systems Interconnection. The Directory: Models CORRIGENDUM 2:September 2012 to ISO/IEC :2008 IST/6 Will not be implemented as a British Standard ISO/IEC : Information technology. Open Systems Interconnection. The Directory: Abstract service definition CORRIGENDUM 4:September 2012 to ISO/IEC :2005 IST/6 Will not be implemented as a British Standard ISO/IEC : Information technology. Open Systems Interconnection. The Directory: Abstract service definition CORRIGENDUM 2:September 2012 to ISO/IEC :2008 IST/6 Will not be implemented as a British Standard ISO/IEC : Information technology. Open Systems Interconnection. The Directory: Protocol specifications CORRIGENDUM 2:September 2012 to ISO/IEC :2008 IST/6 Will not be implemented as a British Standard ISO/IEC : Information technology. Open Systems Interconnection. The Directory: Protocol specifications CORRIGENDUM 4:September 2012 to ISO/IEC :2005 IST/6 Will not be implemented as a British Standard ISO/IEC : Information technology. Open Systems Interconnection. The Directory: Selected attribute types CORRIGENDUM 2:September 2012 to ISO/IEC :2008 IST/6 Will not be implemented as a British Standard 64 Update Standards November 2012 Prices may be subject to change.

65 ISO/IEC : Information technology. Open Systems Interconnection. The Directory: Selected object classes CORRIGENDUM 4:September 2012 to ISO/IEC :2005 IST/6 Will not be implemented as a British Standard ISO/IEC : Information technology. Open Systems Interconnection. The Directory: Selected object classes CORRIGENDUM 1:September 2012 to ISO/IEC :2005 IST/6 Will not be implemented as a British Standard ISO/IEC : Information technology. Open Systems Interconnection. The Directory: Public-key and attribute certificate frameworks CORRIGENDUM 2:September 2012 to ISO/IEC :2008 IST/6 Will not be implemented as a British Standard ISO/IEC : Information technology. Open Systems Interconnection. The Directory: Public-key and attribute certificate frameworks CORRIGENDUM 4:September 2012 to ISO/IEC :2005 IST/6 Will not be implemented as a British Standard ISO : Qualification testing of welders. Fusion welding. Steels CORRIGENDUM 1:September 2012 to ISO :2012 WEE/36 Will not be implemented as a British Standard ISO 10004:2012 Quality management. Customer satisfaction. Guidelines for monitoring and measuring members, non-members QS/1 ISO 10380:2012 (Edition 3) Pipework. Corrugated metal hoses and hose assemblies members, non-members GSE/42 ISO 10383:2012 (Edition 3) Securities and related financial instruments. Codes for exchanges and market identification (MIC) members, non-members IST/12 ISO :2012 Technical systems and aids for disabled or handicapped persons. Wheelchair tiedown and occupant-restraint systems. Requirements and test methods for all systems members, non-members CH/173/1 ISO 11092: Textiles. Physiological effects. Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guardedhotplate test) AMENDMENT 1:September 2012 to ISO 11092: members, non-members TCI/24 ISO 11209:2012 Ships and marine technology. Large yachts. Deck crane and access gangways strength requirements members, non-members SME/32/-/12 ISO/TR 11225:2012 Space environment (natural and artificial). Guide to reference and standard atmosphere models members, non-members ACE/68/-/4 ISO :2012 Needle-based injection systems for medical use. Requirements and test methods. Finished containers members, non-members CH/84 ISO :2012 Needle-based injection systems for medical use. Requirements and test methods. Automated functions members, non-members CH/84 ISO/IEC :2012 Identification cards. Optical memory cards. General characteristics members, non-members IST/17 ISO :2012 Building environment design. Design, dimensioning, installation and control of embedded radiant heating and cooling systems. Determination of the design heating and cooling capacity members, non-members RHE/2 ISO :2012 Building environment design. Design, dimensioning, installation and control of embedded radiant heating and cooling systems. Design and dimensioning members, non-members RHE/2 ISO : Ophthalmic implants. Intraocular lenses. Labelling and information AMENDMENT 1:October 2012 to ISO : members, non-members CH/172/7 ISO :2012 (Edition 3) Plastics pipes and fittings. Equipment for fusion jointing polyethylene systems. Butt fusion members, non-members PRI/88/2 ISO :2012 Tractors and machinery for agriculture and forestry. Test procedures for positioning and guidance systems in agriculture. Testing of satellite-based auto-guidance systems during straight and level travel members, non-members AGE/6 ISO 12492:2012 Rubber, raw. Determination of water content by Karl Fischer method members, non-members PRI/23 ISO 12631:2012 Thermal performance of curtain walling. Calculation of thermal transmittance members, non-members B/540 ISO 12836:2012 Dentistry. Digitizing devices for CAD/CAM systems for indirect dental restorations. Test methods for assessing accuracy members, non-members CH/106 ISO/TR 12942:2012 Compressors. Classification. Complementary information to ISO members, non-members MCE/8 Update Standards November 2012 Prices may be subject to change. 65

66 ISO Publications continued... ISO/IEC TR :2012 Information technology. Interoperability with Assistive Technology (AT). IAccessible2 accessibility application programming interface (API) members, non-members ICT/-/6 ISO 13127:2012 Packaging. Child resistant packaging. Mechanical test methods for reclosable child resistant packaging systems members, non-members PKW/0/3 ISO 13129:2012 Paints and varnishes. Electrochemical measurement of the protection provided to steel by paint coatings. Current interrupter (CI) technique, relaxation voltammetry (RV) technique and DC transient (DCT) measurements members, non-members STI/10 ISO 13145:2012 Rubber. Determination of viscosity and stress relaxation using a rotorless sealed shear rheometer members, non-members PRI/22 ISO :2012 Implants for surgery. Calcium phosphates. Hydroxyapatite and beta-tricalcium phosphate bone substitutes members, non-members CH/150/1 ISO 13297:2012 (Edition 3) Small craft. Electrical systems. Alternating current installations members, non-members GME/33 ISO 13372:2012 Condition monitoring and diagnostics of machines. Vocabulary members, non-members GME/21/7 ISO : Dentistry. Periodontal curettes, dental scalers and excavators. Periodontal curettes of Gr-type AMENDMENT 1:October 2012 to ISO : members, non-members CH/106/4 ISO 13571:2012 Life-threatening components of fire. Guidelines for the estimation of time to compromised tenability in fires members, non-members FSH/16 ISO 13588:2012 Non-destructive testing of welds. Ultrasonic testing. Use of automated phased array technology members, non-members WEE/46 ISO :2012 Safety of machinery. Safety-related parts of control systems. Validation members, non-members MCE/3 ISO/IEC : Identification cards. Contactless integrated circuit cards. Proximity cards. Initialization and anticollision AMENDMENT 2:September 2012 to ISO/IEC : members, non-members IST/17 ISO/IEC : Bit rates of fc/8, fc/4 and fc/2, protocol activation of PICC Type A and frame size from 512 bytes to 4096 bytes AMENDMENT 2:September 2012 to ISO/IEC : members, non-members IST/17 ISO :2012 Processes, data elements and documents in commerce, industry and administration. Long term signature profiles. Long term signature profiles for CMS Advanced Electronic Signatures (CAdES) members, non-members ICT/-/4 Will not be implemented as a British Standard. Is approved as suitable for use in the UK ISO :2012 Processes, data elements and documents in commerce, industry and administration. Long term signature profiles. Long term signature profiles for XML Advanced Electronic Signatures (XAdES) members, non-members ICT/-/4 Will not be implemented as a British Standard. Is approved as suitable for use in the UK ISO/IEC 14651: Information technology. International string ordering and comparison. Method for comparing character strings and description of the common template tailorable ordering AMENDMENT 1:October 2012 to ISO/IEC 14651: members, non-members IST/5 ISO :2012 Grout for prestressing tendons. Basic requirements members, non-members B/525/2 ISO :2012 Grout for prestressing tendons. Grouting procedures members, non-members B/525/2 ISO :2012 Grout for prestressing tendons. Test methods members, non-members B/525/2 ISO/TS : Health and safety in welding and allied processes. Laboratory method for sampling fume and gases. Procedure for quantitative determination of fume and gases from resistance spot welding CORRIGENDUM 1:September 2012 to ISO/TS :2012 WEE/40 ISO/IEC :2012 Systems and software engineering. Systems and software assurance. Assurance in the life cycle members, non-members IST/15 ISO/TR :2012 Agricultural irrigation equipment. Test facilities for agricultural irrigation equipment. Test facility operating manual members, non-members AGE/30 ISO 15184:2012 Paints and varnishes. Determination of film hardness by pencil test members, non-members STI/10 66 Update Standards November 2012 Prices may be subject to change.

67 3rd Annual Carbon & Environmental Footprinting Conference Gain competitive advantage through product footprinting 22 November 2012, London This engaging and interactive event aims to further senior industry attendees a understanding of how carbon footprinting infiltrates every aspect of product delivery. Thought leaders, policy makers, climate change practitioners from wide range of industry sectors will gather to share their experiences of product footprinting and PAS Obtain valuable updates on how to make sound financial investments, increase transparency at every stage of the product lifecycle, gain competitive advantage and much more. Delve into conversations on forward thinking initiatives including, environmental footprinting and hot-spot analysis. Exchange valuable advice on good practice through interactive networking, presentations and an array of case studies from UK as well as lesson learnt from international luminaries. Five reasons why you shouldn t miss this event: Discover the opportunities and overcome the challenges with case studies from Coca-Cola, Boots and the Carbon Trust. Hear the latest updates from the European Commission on projects and initiatives Stay ahead of the competition and learn what is on the horizon of environmental footprinting Learn about the new carbon footprint standard ISO Network with experts and peers and much, much more. Key note speakers include Dr Michele Galatola, Product Team Leader, DG Environment, European Commission Joe Franses, Director, Corporate Responsibility & Sustainability, Coca-Cola Enterprises Mark Barthel, Head of Product Sustainability Forum, WRAP Read the full list of speakers and see how Carbon & Environmental Footprinting Conference can help your business. Read more and book your place now shop.bsigroup.com/footprinting A must attend conference To contact us visit shop.bsigroup.com/iso22301us1211 or contact Customer Services quoting marketing reference code BSOLM-US1211 T F orders@bsigroup.com shop.bsigroup.com/iso22301us1211 Standards and publications may also be ordered via the BSI shop at shop.bsigroup.com *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0) BSI British Standards Institution 2012

68 ISO Publications continued... ISO/IEC TS :2012 Information technology. Process assessment. An exemplar process assessment model for IT service management members, non-members IST/15 ISO 15535:2012 (Edition 3) General requirements for establishing anthropometric databases members, non-members PH/9/-/4 ISO 15688:2012 Road construction and maintenance equipment. Soil stabilizers. Terminology and commercial specifications members, non-members B/513 ISO :2012 Steel for the reinforcement of concrete. Headed bars. Requirements members, non-members ISE/104 Will not be implemented as a British Standard ISO :2012 Steel for the reinforcement of concrete. Headed bars. Test methods members, non-members ISE/104 Will not be implemented as a British Standard ISO/IEC : Information technology. Multimedia content description interface. Multimedia description schemes AMENDMENT 4:October 2012 to ISO/IEC : members, non-members IST/37 Will not be implemented as a British Standard ISO/IEC TR : Information technology. Multimedia content description Interface. MPEG-7 profile schemas AMENDMENT 1:September 2012 to ISO/IEC TR : members, non-members ICT/-/1 ISO 16047: Fasteners. Torque/clamp force testing AMENDMENT 1:September 2012 to ISO 16047: members, non-members FME/9 ISO :2012 Road vehicles. Ergonomic requirements for the driver s workplace in line-service buses. General description, basic requirements members, non-members AUE/12 ISO :2012 Ships and marine technology. Protective coatings and inspection method. Dedicated sea water ballast tanks members, non-members SME/32/-/8 ISO :2012 Ships and marine technology. Protective coatings and inspection method. Void spaces of bulk carriers and oil tankers members, non-members SME/32/-/8 ISO :2012 Ships and marine technology. Protective coatings and inspection method. Cargo oil tanks of crude oil tankers members, non-members SME/32/-/8 ISO 16177:2012 Footwear. Resistance to crack initiation and growth. Belt flex method members, non-members TCI/69 ISO/TS 16479:2012 Thermoplastics pipes for the conveyance of fluids. Determination of the slow cracking resistance of pipes and fittings using the Notched Ring Test (NRT) members, non-members PRI/88/4 ISO 16602: Protective clothing for protection against chemicals. Classification, labelling and performance requirements AMENDMENT 1:September 2012 to ISO 16602: members, non-members PH/3/3 Will not be implemented as a British Standard ISO/TR :2012 Fire safety engineering. Fire risk assessment. Example of an office building members, non-members FSH/24 ISO :2012 Measurement of fluid flow in closed conduits. Ultrasonic meters for gas. Meters for industrial applications members, non-members CPI/30/5 Will not be implemented as a British Standard ISO/TS :2012 Electronic fee collection. Charging performance. Metrics members, non-members EPL/278 ISO :2012 Geometrical product specifications (GPS). General concepts. Basic tenets, specifications, operators, uncertainties and ambiguities members, non-members TDW/4 ISO/TR 17737:2012 Workplace atmospheres. Guidelines for selecting analytical methods for sampling and analyzing isocyanates in air members, non-members EH/2/2 ISO/IEC 18051:2012 (Edition 6) Information technology. Telecommunications and information exchange between systems. Services for Computer Supported Telecommunications Applications (CSTA) Phase III members, non-members ICT/-/1 Will not be implemented as a British Standard ISO/IEC 18052:2012 (Edition 3) Information technology. Telecommunications and information exchange between systems. ASN.1 for Computer Supported Telecommunications Applications (CSTA) Phase III members, non-members ICT/-/1 Will not be implemented as a British Standard ISO/IEC 18056:2012 (Edition 5) Information technology. Telecommunications and information exchange between systems. XML Schema Definitions for Computer Supported Telecommunications Applications (CSTA) Phase III members, non-members ICT/-/1 Will not be implemented as a British Standard 68 Update Standards November 2012 Prices may be subject to change.

69 BS ISO 20252:2012 Market, Opinion and Social Research Vocabulary and service requirements. Market, opinion and social research is now an established global industry. An increasing proportion of the expenditure of market research companies is allocated to multi-national projects whose objective is consistent regional and global measurement. BSI ISO 20252:2012 specifies the internationally recognized terms, definitions and service expectations for market, opinion and social research. Businesses of all sizes, whether they are conducting or commissioning market research, need assurance that it meets with quality standards and is consistent, reliable and valid. If you carry out, commission or buy market research, demonstrating best practice is a potent statement to consumers and competitors. Comprehensively updated since its first publication in 2006, BS ISO 20252:2012 this revision includes: organizations that have fully implemented the standard panel standard BS ISO Price: shop.bsigroup.com/bsiso20252us1211 NEW BOOK New Book: Quality in Market Research: From Theory to Practice A new BSI book, Quality in Market Research: From Theory to Practice, has been written to accompany BS ISO 20252:2012 Market opinion and social research. Vocabulary and service requirements. Enhance your understanding of quality and how it relates to market research with Quality in Market Research From Theory to Practice. Packed with case studies, examples, models and checklists, this book has been developed to provide you with the tools you need to ensure your market research is of the highest standard. Quality in Market Research is the only book on the market to give a full assessment of ISO Market, opinion and social research and provides practical tips and guidance on how to meet this standard. Who is it relevant to? It is suitable for any organization that undertakes research, both nationally and internationally. This includes: or consumer insight team taking the Market Research Society Diploma. shop.bsigroup.com/bip2206us1211

70 ISO Publications continued... ISO/TS :2012 Intelligent transport systems. Traffic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format. Congestion and Travel Time application (TPEG1-CTT) members, non-members EPL/278 ISO :2012 Measurement of ride quality. Lifts (elevators) members, non-members MHE/4 ISO :2012 Measurement of ride quality. Escalators and moving walks members, non-members MHE/4 ISO/TS :2012 Road vehicles. Connection interface for pyrotechnic devices, two-way and three-way connections. Pyrotechnic device and harness connector assembly. Type members, non-members AUE/16 ISO/TS 19158:2012 Geographic information. Quality assurance of data supply members, non-members IST/36 ISO/IEC 19798: Method for the determination of toner cartridge yield for colour printers and multifunction devices that contain printer components CORRIGENDUM 1:September 2012 to ISO/IEC 19798:2007 IST/3 Will not be implemented as a British Standard ISO 20433:2012 Leather. Tests for colour fastness. Colour fastness to crocking members, non-members TCI/69 ISO 21500:2012 Guidance on project management members, non-members MS/2 ISO 22029:2012 Microbeam analysis. EMSA/MAS standard file format for spectral-data exchange members, non-members CII/9 ISO :2012 Geotechnical investigation and testing. Field testing. Electrical cone and piezocone penetration test members, non-members B/526/3 ISO/IEC : Information technology. MPEG audio technologies. MPEG Surround CORRIGENDUM 4:September 2012 to ISO/IEC :2007 IST/37 Will not be implemented as a British Standard ISO/IEC : Information technology. MPEG audio technologies. Spatial Audio Object Coding (SAOC) CORRIGENDUM 1:September 2012 to ISO/IEC :2010 IST/37 Will not be implemented as a British Standard ISO/IEC : Information technology. Rich media user interfaces. Widgets CORRIGENDUM 1:September 2012 to ISO/IEC :2010/A1:2012 IST/37 ISO/IEC :2012 Information technology. Rich media user interfaces. Advanced user interaction (AUI) interfaces members, non-members IST/37 Will not be implemented as a British Standard. Is approved as suitable for use in the UK ISO 23317:2012 Implants for surgery. In vitro evaluation for apatite-forming ability of implant materials members, non-members CH/150/1 ISO :2012 Soil quality. Sampling of soil invertebrates. Guidance for the design of sampling programmes with soil invertebrates members, non-members EH/4 ISO :2012 Language resource management. Semantic annotation framework (SemAF). Dialogue acts members, non-members TS/1 ISO/TR 25100:2012 Intelligent transport systems. Systems architecture. Harmonization of ITS data concepts members, non-members EPL/278 ISO :2012 Energy performance of lifts, escalators and moving walks. Energy measurement and verification members, non-members MHE/4 ISO/TR 27165:2012 Thermoplastics piping systems. Guidance for definitions of wall constructions for pipes members, non-members PRI/88 ISO/IEC TR :2012 Software engineering. Lifecycle profiles for Very Small Entities (VSEs). Management and engineering guide: Generic profile group: Entry profile members, non-members IST/15 ISO/IEC TR :2012 Information technology. Future Network. Problem statement and requirements. Overall aspects members, non-members IST/6 Will not be implemented as a British Standard ISO/IEC :2012 Information technology. Security techniques. Lightweight cryptography. Stream ciphers members, non-members IST/33 ISO/IEC/IEEE :2012 Information technology. Modeling Languages. Syntax and Semantics for IDEF members, non-members IST/15 ISO/IEC/IEEE :2012 Information technology. Modeling Languages. Syntax and Semantics for IDEF1X97 (IDEFobject) members, non-members IST/15 ISO 39001:2012 Road traffic safety (RTS) management systems. Requirements with guidance for use members, non-members HS/1/2 ISO/ASTM 51276:2012 (Edition 3) Practice for use of a polymethylmethacrylate dosimetry system members, non-members NCE/2 Will not be implemented as a British Standard 70 Update Standards November 2012 Prices may be subject to change.

71 Aerospace Series Quality Management Systems Nonconformance Data Definition and Documentation This standard defines the common nonconformance data definition and documentation that shall be exchanged between an internal/external supplier or sub-tier supplier, and the customer when informing about a nonconformity requiring formal decision. The requirements are applicable, partly or totally, when reporting a product nonconformity to the owner or operator, as user of the end item (e.g., engine, aircraft, spacecraft, helicopter), if specified by contract. The process of exchanging, coordinating, and approving nonconformance data varies with the multiple relationships and agreements among all parties concerned. The information provided by this standard forms guidelines for submitting and managing of data through accurate communication. The main objective is to provide the definition of a data set that can be integrated into any form of communication (e.g., electronic data interchange, submission of conventional paper forms). Reporting of nonconformance data, either electronically or conventionally on paper, is subject to the terms and conditions of the contract. This also includes, where applicable, data access under export control regulations. Price: 50 Delivery time: 3-5 days Now available as hard copy or PDF BSI Knowledge Centre your standards resource BSI Knowledge Centre provides the following services to BSI members: information on the status, availability, scope and coverage of standards detailed database searches across current and withdrawn standards response within 1 working day Contact us to arrange a visit to view and purchase in PDF and hardcopy bsigroup.com/withdrawnus1211 For more information contact the BSI Knowledge Centre: Tel Fax knowledgecentre@bsigroup.com bsigroup.com/knowledgecentreus1211

72 NEW Reduce fire risk and improve the safety of non-domestic buildings New edition of PAS 79 Fire Risk Assessment now available PAS 79:2012 Fire Risk Assessment. Guidance and a recommended methodology, is a well-respected document which has already made a positive contribution to enhancing fire safety and protecting and minimizing risk to the occupants of buildings. The standard provides a structured approach to fire risk assessment and is an essential document for fire professionals including fire risk assessors, fire safety consultants, health & safety consultants, building and property managers, facilities managers and consultancies providing fire risk assessments as a service. The revised edition aims to do even more as it includes: New guidance on the role of codes of practice and guidance documents as a basis for determining appropriate fire precautions New guidance on the approach that should be adopted in determining the appropriate fire precautions for existing buildings that do not confirm to current codes of practice applicable to new buildings (e.g. under current building regulations) A new annex that contains a competence standard for fire risk assessors, developed and agreed by stakeholders in the fire safety profession. The revised specification, PAS 79 has been drafted by CS Todd & Associates Ltd, who have been involved in and written the standard since its conception, in conjunction with BSI and a group of representatives from prominent UK fire safety organizations. Integral to the steering group are the Fire Industry Association, the Fire Protection Association and the Institution of Fire Engineers. shop.bsigroup.com/pas79us1211 To contact us visit shop.bsigroup.com/pas79us1211 or contact Customer Services quoting marketing reference code pas79-us1211 T F orders@bsigroup.com shop.bsigroup.com/pas79us1211 Standards and publications may also be ordered via the BSI shop at shop.bsigroup.com *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0) BSI British Standards Institution 2012