STANDARDS January UPDATE. New standard. Online version. BS 8878:2010 Web accessibility. Code of practice. Contents

Size: px

Start display at page:

Download "STANDARDS January UPDATE. New standard. Online version. BS 8878:2010 Web accessibility. Code of practice. Contents"

Julian Tyler Austin
5 years ago
Views:

UPDATE STANDARDS January Online version http://shop.bsigroup.com/ UpdateStandardsOnline 2011 Contents New standard BS 8878:2010 Web accessibility.

1 UPDATE STANDARDS January Online version UpdateStandardsOnline 2011 Contents New standard BS 8878:2010 Web accessibility. Code of practice If you want to ensure any web product you commission or design is accessible for all, then this new standard will help you. BS 8878 is the first British Standard to address the growing challenge of digital inclusion.* 4 Quick Reference Guide 12 New and revised British Standards 12 BS EN and DD ENV publications 17 British Standard implementations 19 Published Documents 19 Drafts for Development 19 Aerospace series 19 Corrigenda to British Standards 20 Updated British Standards 21 Special Announcements 21 British Standards reviewed and confirmed 33 British Standards declared obsolescent 36 British Standards withdrawn 38 British Standards under review 44 New work started 51 Draft British Standards 58 Documents not issued as DPCs 59 CEN publications 60 CEN reports 60 CENELEC publications 62 CENELEC technical specifications 62 IEC publications 62 ISO publications *See back cover for more information raising standards worldwide

Customer Services Your first point of contact 9 am to 5 pm GMT Monday to Friday Call Customer Services now: To purchase standards and publications For further information on standards, publications

2 Customer Services Your first point of contact 9 am to 5 pm GMT Monday to Friday Call Customer Services now: To purchase standards and publications For further information on standards, publications and our services To find out about BSI Membership To reserve your place on one of our seminars and conferences. Help us give you the best customer service If you have done business with us before, please quote your account number When phoning, always take a note of the name of the Customer Service Advisor you are speaking to If you are responding to literature please quote the reference code. How to order Telephone +44 (0) Website orders@bsigroup.com to place an order info@bsigroup.com to make an enquiry Fax +44 (0) Post BSI Customer Services 389 Chiswick High Road London W4 4AL We welcome all your feedback, please contact us with your comments. Your calls may be recorded and/or monitored to help us improve our service to you. **ATTENTION BSI MEMBERS** If you are a BSI Member you can order on your credit account. Standards and publications may also be ordered via the BSI shop at *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0) BSI British Standards Institution 2010

for BS 8110-1:1997 or similar construction standards, even though the Eurocodes

Or perhaps you need to look at standards on Loading for Buildings at a particular

Be it for legal, education, compliance or simple information needs, these

You can access these withdrawn standards even though they have been replaced by

Knowledge Centre +44 (0)20 8996 7004 knowledgecentre@bsigroup.com.

3 +44 (0) Withdrawn construction standards Do you still have a need for BS :1997 or similar construction standards, even though the Eurocodes have replaced them? Or perhaps you need to look at standards on Loading for Buildings at a particular point in time? Be it for legal, education, compliance or simple information needs, these standards are still important. Did you know they are still accessible? You can access these withdrawn standards even though they have been replaced by the Eurocodes by contacting the Knowledge Centre. Knowledge Centre +44 (0) knowledgecentre@bsigroup.com. Ecobuild - Stand S1561 1st 3rd March 2011 Excel, London Ecobuild is the world s biggest event for sustainable design, construction and the built environment and the UK s largest construction event of any kind. We look forward to seeing you at stand S1561. To get involved visit raising standards worldwide

4 British Standards Quick Reference Guide The following British Standards are listed or referred to in this issue of Update Standards with the exception of those in New Work Started. Building and civil engineering BS BS BS BS BS BS BS BS BS BS EN BS EN BS EN BS EN BS EN BS EN ISO BS EN ISO , 37 BS EN ISO BS EN ISO BS EN , 37 BS EN , 37 BS EN , 37 BS EN , 37 BS EN , 37 BS EN ISO BS EN ISO BS EN ISO BS EN BS EN , 37 BS EN ISO BS EN BS EN ISO BS EN , 37 BS ISO BS ISO BS ISO PD PD PD ISO/TR Consumer products and services BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS DD CEN ISO/TS BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO , 37 BS EN BS EN BS EN BS EN BS ISO BS ISO BS ISO BS ISO BS ISO DD ISO/PAS , 37 Electrotechnical BS BS BS BS BS BS BS BS , 34 BS BS BS BS , 36 BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS 9612 N BS 9612 N BS 9612 N BS 9612 N BS 9612 N BS 9612 N BS 9612 N BS 9612 N BS 9612 N BS 9612 N BS 9612 N BS BS BS BS BS BS BS BS BS BS BS EN ISO BS EN ISO BS EN BS EN BS EN BS EN BS EN BS EN BS EN , 20 BS EN BS EN BS EN BS EN BS EN , 21 BS EN BS EN BS EN BS EN BS EN BS EN /116206/ BS ISO BS ISO BS ISO BS ISO BS IEC 60050(111)...36 BS IEC 60050(121)...36 DD IEC/PAS Engineering BS BS BS BS BS BS BS BS BS BS , 22 BS BS BS BS BS BS BS BS BS BS , 36 BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS , 26 BS BS BS BS BS BS BS BS BS BS BS BS Prices may be subject to change. Update Standards Jan 2011

5 British Standards Quick Reference Guide continued... BS 4633 and BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS , 37 BS BS BS BS BS BS BS BS BS BS BS BS BS EN ISO , 37 BS EN ISO BS EN , 37 BS EN , 37 BS EN , 37 BS EN , 14 BS EN BS EN BS EN BS EN BS EN BS EN , 38 BS EN BS EN BS EN BS EN , 38 BS EN ISO BS EN BS EN BS EN BS EN BS EN ISO BS EN BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN BS EN ISO BS EN , 37 BS EN ISO BS EN ISO BS EN ISO , 37 BS EN ISO BS EN BS EN BS EN ISO , 40 BS EN BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN BS EN BS EN ISO BS EN BS EN BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO , 37 BS ISO BS ISO BS ISO BS ISO BS ISO , 18 BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO DD ISO/TS DD ISO/TS PD PD PD ISO/TR PD ISO/TR PD ISO/TR BS 4A BS 2A BS G BS G BS 6L BS 6L BS 5L BS 7L BS 4L BS 4L BS 3L BS 2L BS L BS L BS L BS L BS L BS L BS L BS L BS 2L BS L BS L BS 2M BS HR BS 2HR BS 2HR BS HR BS 3HR BS 4HR BS PL BS PL BS PL BS PL BS PL BS PL BS SP 55 and SP BS AU BS AU 2a...32 BS AU BS AU BS AU BS AU BS AU BS AU BS AU BS AU BS AU BS AU BS AU BS AU BS AU 24a...32 BS AU BS AU 30b...33 BS AU 114b...33 BS AU 141a...36 BS AU 146b...33 Health and environment BS BS BS BS BS BS BS BS DD CEN/TS , 37 BS EN BS EN BS EN ISO BS EN BS EN BS EN , 37 BS EN BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO , 37 BS EN ISO BS EN ISO Update Standards Jan 2011 Prices may be subject to change. 5

6 British Standards Quick Reference Guide continued... BS EN ISO BS EN ISO BS EN ISO BS EN ISO , 37 BS EN ISO BS EN ISO BS EN ISO , 20 BS EN BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN BS ISO , 37 BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO/TR BS ISO/TR BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO DD ISO/PAS DD ISO/TS DD ISO/TS Information systems BS BS BS BS BS EN ISO/IEC BS EN ISO BS EN BS EN BS ISO BS ISO/IEC BS ISO/IEC BS ISO BS ISO/IEC BS ISO/IEC BS ISO/IEC BS ISO/IEC BS ISO/IEC BS ISO/IEC PD ISO/IEC TR PD ISO/IEC TR PD CLC/TR Management systems BS BS BS EN BS EN BS EN BS ISO BS ISO BS ISO BS ISO BS ISO , 37 BS ISO DD ISO/TS , 37 Materials and chemicals BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS , 17, 36, 38, 39, 41, 43 BS BS BS BS BS BS , 36 BS , 25, 33 BS BS BS BS BS BS , 39, 40, 41 BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS , 28 BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS , 30 BS BS BS BS BS BS BS BS BS , 35, 37 BS , 40 BS BS BS , 37 BS , 37 BS BS BS BS BS DD CEN/TS , 37 DD CEN/TS , 37 BS EN ISO BS EN ISO BS EN , 37 BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO , 37 BS EN ISO BS EN ISO , 40 BS EN ISO BS EN ISO BS EN ISO BS EN , 37 BS EN BS EN BS EN BS EN ISO BS EN , 37 BS EN BS EN , 37 BS EN ISO , 41 BS EN ISO BS EN BS EN ISO BS EN ISO BS ISO BS ISO BS ISO , 36 BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO Prices may be subject to change. Update Standards Jan 2011

Be more competitive: collaborate BS 11000-1:2010 Collaborative business relationships. A framework specification Collaboration can make you more competitive. How?

7 Be more competitive: collaborate BS :2010 Collaborative business relationships. A framework specification Collaboration can make you more competitive. How? By helping you achieve better cost management, better resource and risk management and fostering innovation. What's more, organizations collaborating together can win and deliver on contracts that would be impossible for one to fulfil alone. BS is a new British Standard which provides a strategic framework to build collaborative relationships with other organizations. It can help you to be more effective about how you share knowledge, skills and resources to meet mutual goals. What benefits can my organization gain by using this standard? Collaborative approaches have been shown to deliver better cost management, improved time, resource and risk management and to foster innovation. Complying with this British Standard will help you to effectively share knowledge, skills and resources with your collaborative partners. This in turn will enable you to meet mutually defined objectives and to provide new levels of value creation. Read more and buy at: To buy online visit or contact BSI Customer Services quoting marketing reference code A-U Tel +44 (0) Fax +44 (0) orders@bsigroup.com raising standards worldwide Standards and publications may also be ordered via the BSI shop at *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0) BSI British Standards Institution 2010

8 British Standards Quick Reference Guide continued... BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO Alpha-numeric sequence of British Standards quoted in this issue BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS , 22 BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS , 36 BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS , 17, 36, 38, 39, 41, 43 BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS , 36 BS BS BS BS BS BS BS BS , 25, 33 BS BS BS BS BS BS BS BS BS BS BS BS , 34 BS BS BS BS BS BS , 26 BS BS , 39, 40, 41 BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS 4633 and BS BS BS , 36 BS BS BS BS BS BS BS BS BS BS BS BS BS BS , 28 BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS , 30 BS BS BS BS BS BS BS BS BS BS BS Prices may be subject to change. Update Standards Jan 2011

New standard BS ISO 26000:2010 Guidance on social responsibility Are you meeting the expectations of your customers and stakeholders when it comes to social responsibility?

9 New standard BS ISO 26000:2010 Guidance on social responsibility Are you meeting the expectations of your customers and stakeholders when it comes to social responsibility? Like it or not, the way your organization affects the environment and wider society is now a major part of your brand. Companies that embrace these challenges are finding they: Increase their brand's value Attract and retain the best staff Gain a competitive advantage. There is widespread demand for both public and private sector organizations to behave in a more socially responsible way, but what exactly does social responsibility (SR) mean, and how do you achieve it? BS ISO will help answer these questions by providing guidelines for social responsibility. The standard covers issues such as organizational governance, human rights, labour practices, the environment, fair operating practices, consumer issues, and community involvement and development. This standard is aimed at all professionals who have social responsibility as part of their remit, including: Heads of corporate social responsibility Directors of communications Heads of sustainability Directors of quality Supply chain and partnership managers Heads of corporate affairs Directors of governance Chief executives Managing directors Chief operating officers. It is meant for all organizations in the private, public and non-profit sectors, whether operating in developed or developing countries. Read more and buy at To buy online visit or contact BSI Customer Services quoting marketing reference code 26000A-U Tel +44 (0) Fax +44 (0) orders@bsigroup.com raising standards worldwide Standards and publications may also be ordered via the BSI shop at *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0) BSI British Standards Institution 2010

10 Alpha-numeric Sequence of British Standards continued... BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS , 37 BS BS , 35, 37 BS , 40 BS BS BS BS BS , 37 BS , 37 BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS 9612 N BS 9612 N BS 9612 N BS 9612 N BS 9612 N BS 9612 N BS 9612 N BS 9612 N BS 9612 N BS 9612 N BS 9612 N BS BS BS BS BS BS BS BS BS BS BS DD CEN/TS , 37 DD CEN/TS , 37 DD CEN/TS , 37 DD CEN ISO/TS BS EN ISO , 37 BS EN ISO BS EN ISO BS EN BS EN BS EN BS EN ISO BS EN , 37 BS EN BS EN ISO/IEC BS EN BS EN BS EN BS EN , 37 BS EN ISO BS EN BS EN BS EN , 37 BS EN BS EN , 37 BS EN ISO BS EN , 37 BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN , 14 BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN BS EN BS EN ISO BS EN ISO BS EN ISO BS EN BS EN BS EN BS EN , 38 BS EN BS EN BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN BS EN , 38 BS EN ISO BS EN BS EN BS EN ISO BS EN BS EN BS EN ISO BS EN BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO , 37 BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO , 37 BS EN ISO , 40 BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN BS EN ISO BS EN ISO , 37 BS EN ISO BS EN ISO BS EN ISO BS EN , 37 BS EN ISO BS EN ISO BS EN ISO , 37 BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO , 37 BS EN ISO BS EN ISO BS EN ISO BS EN BS EN ISO BS EN BS EN ISO , 40 BS EN , 37 BS EN , 37 BS EN BS EN , 37 BS EN , 37 BS EN , 37 BS EN , 37 BS EN BS EN BS EN BS EN BS EN ISO BS EN ISO , 37 BS EN ISO BS EN ISO BS EN ISO BS EN BS EN , 37 BS EN ISO BS EN ISO BS EN , 37 BS EN ISO BS EN ISO BS EN BS EN ISO BS EN ISO BS EN , 37 BS EN ISO , 41 BS EN ISO , 20 BS EN ISO BS EN BS EN BS EN ISO BS EN ISO BS EN BS EN BS EN BS EN BS EN Prices may be subject to change. Update Standards Jan 2011

11 Alpha-numeric Sequence of British Standards continued... BS EN BS EN BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN BS EN ISO BS EN ISO BS EN BS EN , 37 BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN , 20 BS EN BS EN BS EN BS EN BS EN , 21 BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN /116206/ BS ISO , 37 BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO , 36 BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO/IEC BS ISO , 37 BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO , 18 BS ISO BS ISO/IEC BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO/TR BS ISO BS ISO BS ISO/IEC BS ISO/TR BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO/IEC BS ISO BS ISO/IEC BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO/IEC BS ISO/IEC BS ISO BS ISO BS ISO BS ISO/IEC BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO , 37 BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS IEC 60050(111)...36 BS IEC 60050(121)...36 DD ISO/PAS , 37 DD ISO/PAS DD ISO/TS DD ISO/TS DD ISO/TS , 37 DD ISO/TS DD ISO/TS DD IEC/PAS PD PD PD PD PD ISO/TR PD ISO/TR PD ISO/TR PD ISO/TR PD ISO/IEC TR PD ISO/IEC TR PD CLC/TR BS 4A BS 2A BS G BS G BS 6L BS 6L BS 5L BS 7L BS 4L BS 4L BS 3L BS 2L BS L BS L BS L BS L BS L BS L BS L BS L BS 2L BS L BS L BS 2M BS 2HR BS HR BS HR BS 2HR BS 4HR BS 3HR BS PL BS PL BS PL BS PL BS PL BS PL BS SP 55 and SP BS AU BS AU 2a...32 BS AU BS AU BS AU BS AU BS AU BS AU BS AU BS AU BS AU BS AU BS AU BS AU BS AU 24a...32 BS AU BS AU 30b...33 BS AU 114b...33 BS AU 141a...36 BS AU 146b...33 PAS Update Standards Jan 2011 Prices may be subject to change. 11

12 British Standards BRITISH STANDARDS The following British Standard publications are available from BSI Customer Services (see How to order on page 2). The publications listed below are new and revised British Standards that were made available last month. An existing BSI publication bearing a number identical to one announced below is automatically withdrawn unless stated otherwise. In all other cases of supersession, details are given and a corresponding entry appears in the British Standards withdrawn section. BRITISH STANDARD IMPLEMENTATIONS WILL BE SUPPLIED IN PREFERENCE TO EUROPEAN OR INTERNATIONAL STANDARDS, UNLESS OTHERWISE REQUESTED. Please order by the British Standard reference not the ISBN number. BS 2000 series standards are also available from: Library of the Energy Institute 61 New Cavendish Street London W1G 7AR Tel: Fax: lis@energyinst.org.uk For this series, member pricing is applicable to BSI and Energy Institute members. BS :2010 Cylindrical helical springs made from round wire and bar. Guide to methods of specifying and tolerancing hot coiled springs, and cold coiled springs not covered by BS EN 15800, and general spring testing. Compression springs supersedes BS :2002 ISBN FME/9/3 BS 6172:2010 Specification for installation, servicing and maintenance of domestic gas cooking appliances (2nd and 3rd family gases) supersedes BS 6172:2004 ISBN GSE/30/-/10 BS 6510:2010 Steel-framed windows and glazed doors. Specification supersedes BS 6510:2005 ISBN B/538/1 BS 8878:2010 Web accessibility. Code of practice ISBN members, non-members IST/45 This British Standard is based on PAS 78:2006 which has been withdrawn BS 18477:2010 Inclusive service provision. Requirements for identifying and responding to consumer vulnerability ISBN members, non-members SVS/0 BS EN PUBLICATIONS The following are British Standard implementations of the English language versions of European Standards (ENs). BSI has an obligation to publish all ENs and to withdraw any conflicting British Standards. This has led to a series of standards, BS ENs, using the EN number. Note: The date referenced in the identifier is the date of the European standard. BS EN ISO 148-1:2010 Metallic materials. Charpy pendulum impact test. Test method supersedes BS EN :1990 ISBN members, non-members ISE/101/4 BS EN ISO 175:2010 Plastics. Methods of test for the determination of the effects of immersion in liquid chemicals supersedes the dual numbered standard BS EN ISO 175:2001, BS :Method 830A:1999 ISBN PRI/21 BS EN 312:2010 Particleboards. Specifications supersedes BS EN 312:2003 ISBN members, non-members B/541 BS EN 459-2:2010 Building lime. Test methods supersedes BS EN 459-2:2001 ISBN members, non-members B/516/11 BS EN 1534:2010 Wood flooring. Determination of resistance to indentation. Test method supersedes BS EN 1534:2000 ISBN members, non-members B/543 BS EN :2010 Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE). General supersedes BS 7281:1990 and BS EN :2002 ISBN members, non-members PRI/88/2 BS EN :2010 Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE). Pipes supersedes BS 7281:1990 and BS EN :2002 ISBN PRI/88/2 BS EN :2010 Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE). Fittings supersedes BS 7336:1990 and BS EN :2002 ISBN members, non-members PRI/88/2 BS EN :2010 Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE). Fitness for purpose of the system supersedes BS 7281:1990 and BS EN :2002 ISBN members, non-members PRI/88/2 BS EN :2010 Stationary source emissions. Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs. Sampling and analysis of dioxin-like PCBs supersedes DD CEN/TS :2007 ISBN members, non-members EH/2/1 BS EN ISO 2061:2010 Textiles. Determination of twist in yarns. Direct counting method supersedes BS EN ISO 2061:1996 ISBN members, non-members TCI/24 BS EN :2010 Aerospace series. Paints and varnishes. Two component cold curing polyurethane finish. Basic requirements ISBN members, non-members ACE/65/-/3 12 Prices may be subject to change. Update Standards Jan 2011

New standard BS 6465-4:2010 Sanitary installations. Code of practice for the provision of public toilets In the UK, there are 40% less public toilets than ten years ago.

13 New standard BS :2010 Sanitary installations. Code of practice for the provision of public toilets In the UK, there are 40% less public toilets than ten years ago. Research and feedback from community groups has shown that public toilet provision is essential in creating accessible and sustainable cities, and meeting the needs of, tourists, visitors and residents. To meet these needs, and those of people in towns, villages and rural areas, it is essential that there are adequate numbers of public toilets and that they are in the correct locations, accessible, well designed and suitable for user needs. What is BS ? This part of BS 6465 gives recommendations on the location, number, sitting, design and management of public toilets. It is applicable to the provision of new facilities and to the retention and refurbishment of existing facilities. This standard provides recommendations and guidance intended for those responsible for the surveying, assessing, planning, commissioning, designing, managing and use of public toilets. The recommendations and guidance in this standard are intended to cover public toilet provision for the full range of users and in all locations including towns and cities, rural areas and villages and in relation to main transport routes and termini. What type of facilities does BS apply to? This standard is applicable to the following types of public toilet facilities: Municipal public on-street toilets Off-street publicly available toilets (e.g. in shopping malls) Automatic public conveniences (APCs) Street urinals Facilities for disabled people Baby changing and ancillary toilet facilities. Read more and buy at To buy online visit or contact BSI Customer Services quoting marketing reference code A-U Tel +44 (0) Fax +44 (0) raising standards worldwide Standards and publications may also be ordered via the BSI shop at *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0) BSI British Standards Institution 2010

14 BS EN Publications continued... BS EN :2010 Aerospace series. Paints and varnishes. Two component cold curing polyurethane finish. High chemical resistance ISBN members, non-members ACE/65/-/3 BS EN :2010 Aerospace series. Paints and varnishes. Two component cold curing polyurethane finish. Flexible and high fluid resistance for interior ISBN members, non-members ACE/65/-/3 BS EN :2010 Aerospace series. Paints and varnishes. Two component cold curing polyurethane finish. High flexibility ISBN members, non-members ACE/65/-/3 BS EN 3238:2010 Aerospace series. Metallic materials. Test method. Shear test for wires and rivets ISBN members, non-members ACE/61/-/6 BS EN 3274:2010 Aerospace series. Pipe coupling Thread end. Geometric configuration supersedes BS EN 3274:2001 ISBN members, non-members ACE/69 BS EN 3777:2010 Aerospace series. Pins, quick release, single and double acting. Technical specification ISBN members, non-members ACE/12 BS EN 3843:2010 Aerospace series. Nuts, bihexagonal, selflocking, with counterbore, in heat resisting steel, passivated. Classification: 1100 MPa (at ambient temperature)/650 C ISBN members, non-members ACE/12 BS EN 3911:2010 Aerospace series. Six lobe recess. Geometrical definition ISBN members, non-members ACE/12 BS EN 4023:2010 Aerospace series. Pipe coupling 8 30 in titanium alloy. Elbows 45 supersedes BS EN 4023:2001 ISBN members, non-members ACE/69 BS EN 4025:2010 Aerospace series. Pipe coupling 8 30 in titanium alloy. Elbows 45, bulkhead supersedes BS EN 4025:2001 ISBN members, non-members ACE/69 BS EN ISO :2010 Petroleum and related products. Determination of the ageing behaviour of inhibited oils and fluids using the TOST test. Anhydrous procedure for synthetic hydraulic fluids supersedes BS EN ISO :2006 ISBN MCE/18/-/16 BS EN :2010 Aerospace series. Bearings, spherical plain, in corrosion resisting steel with self-lubricating liner elevated load under low oscillations. Narrow series. Dimensions and loads. Inch series with low friction coefficient ISBN members, non-members ACE/12 BS EN :2010 Aerospace series. Bearings, spherical plain, in corrosion resisting steel with self-lubricating liner elevated load under low oscillations. Wide series. Dimensions and loads. Inch series with low friction coefficient ISBN members, non-members ACE/12 BS EN 4657:2010 Aerospace series. Steel FE-PM1507 (X1CrNiMoAlTi ). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation remelted. Bars. a or D µ 200 mm. Rm 1650 MPa ISBN members, non-members ACE/61/-/15 BS EN :2010 Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification. Remelting stock ISBN ACE/61/-/48 BS EN :2010 Aerospace series. Titanium and titanium alloys. Technical specification. Plate, sheet and strip ISBN ACE/61/-/49 BS EN :2010 Aerospace series. Titanium and titanium alloys. Technical specification. Bar and section ISBN ACE/61/-/49 BS EN :2010 Aerospace series. Titanium and titanium alloys. Technical specification. Tube ISBN ACE/61/-/49 BS EN :2010 Aerospace series. Titanium and titanium alloys. Technical specification. Wire ISBN ACE/61/-/49 BS EN :2010 Aerospace series. Titanium and titanium alloys. Technical specification. Forging stock ISBN ACE/61/-/49 BS EN :2010 Aerospace series. Titanium and titanium alloys. Technical specification. Pre-production and production forgings ISBN ACE/61/-/49 BS EN :2010 Aerospace series. Titanium and titanium alloys. Remelting stock ISBN ACE/61/-/49 BS EN ISO 6719:2010 Anodizing of aluminium and its alloys. Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments supersedes BS EN :2001 ISBN members, non-members STI/32 14 Prices may be subject to change. Update Standards Jan 2011

15 BS EN ISO 7779:2010 Acoustics. Measurement of airborne noise emitted by information technology and telecommunications equipment supersedes BS EN ISO 7779:2001 ISBN members, non-members EH/1/4 BS EN ISO 10890:2010 Paints and varnishes. Modelling of biocide release rate from antifouling paints by massbalance calculation ISBN members, non-members STI/10 BS EN :2010 Solid biofuels. Determination of particle size distribution. Oscillating screen method using sieve apertures of 1 mm and above supersedes DD CEN/TS :2006 ISBN members, non-members PTI/17 BS EN ISO :2010 Building construction. Jointing products. Determination of extrudability of sealants supersedes BS EN 28394:1991 ISBN members, non-members B/547 BS EN ISO :2010 Building construction. Jointing products. Determination of extrudability of sealants using standardized apparatus supersedes BS EN 28394:1991 ISBN members, non-members B/547 BS EN ISO :2010 Infusion equipment for medical use. Infusion sets for single use, gravity feed supersedes BS EN ISO :2007 ISBN CH/212 BS EN ISO :2010 Injection equipment for medical use. One-pointcut (OPC) ampoules supersedes BS EN ISO :1999 ISBN members, non-members CH/212 BS EN ISO :2010 Ergonomics of human-system interaction. Human-centred design for interactive systems supersedes BS EN ISO 13407:1999 ISBN members, non-members PH/9 BS EN ISO :2010 Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM). CMMs using single and multiple stylus contacting probing systems supersedes BS EN ISO :2001 and DD ISO/PAS 12868:2009 ISBN members, non-members TDW/4 BS EN ISO :2010 Hand-held non-electric power tools. Safety requirements. Non-rotary percussive power tools supersedes BS EN 792-4:2000+A1:2008 ISBN members, non-members MCE/8/-/2 BS EN :2010 Load restraining on road vehicles. Safety. Calculation of securing forces supersedes BS EN :2003 ISBN members, non-members MHE/16 BS EN 12948:2010 Liming materials. Determination of size distribution by dry and wet sieving supersedes BS EN 12948:2002 ISBN members, non-members CII/37 BS EN 13306:2010 Maintenance. Maintenance terminology supersedes BS EN 13306:2001 ISBN members, non-members DS/1 BS EN :2010 Characterization of waste. Terminology. Management related terms and definitions supersedes BS EN :2004 ISBN members, non-members B/508/3 BS EN 14229:2010 Structural timber. Wood poles for overhead lines supersedes BS EN 12465:2001, BS EN 12479:2002, BS EN 12509:2001, BS EN 12510:2002 and BS EN 12511:2002 ISBN members, non-members B/518 BS EN 14588:2010 Solid biofuels. Terminology, definitions and descriptions supersedes DD CEN/TS 14588:2004 ISBN members, non-members PTI/17 BS EN :2010 Solid biofuels. Determination of particle size distribution. Vibrating screen method using sieve apertures of 3,15 mm and below supersedes DD CEN/TS :2006 ISBN members, non-members PTI/17 BS EN ISO 15234:2010 Paints and varnishes. Testing of formaldehydeemitting coatings and melamine foams. Determination of the steady-state concentration of formaldehyde in a small test chamber ISBN members, non-members STI/3 BS EN ISO :2010 Steel for the reinforcement and prestressing of concrete. Test methods. Reinforcing bars, wire rod and wire supersedes BS EN ISO :2002 ISBN ISE/104 BS EN ISO :2010 Steel for the reinforcement and prestressing of concrete. Test methods. Welded fabric supersedes BS EN ISO :2002 ISBN ISE/104 BS EN ISO :2010 Steel for the reinforcement and prestressing of concrete. Test methods. Prestressing steel supersedes BS EN ISO :2002 ISBN members, non-members ISE/104 BS EN 15774:2010 Food processing machinery. Machines for processing fresh and filled pasta (tagliatelle, cannelloni, ravioli, tortellini, orecchiette and gnocchi). Safety and hygiene requirements ISBN members, non-members MCE/3/5 Update Standards Jan 2011 Prices may be subject to change. 15

16 BS EN Publications continued... BS EN 15828:2010 Hardware for furniture. Strength and durability of hinges and their components. Stays and hinges pivoting on a horizontal axis ISBN FW/0/1 BS EN 15904:2010 Glass packaging. Standard tolerances for flaconnage ISBN members, non-members PKW/0/-/7 BS EN 15908:2010 Anaesthetic and respiratory equipment. Noninterchangeable screw-threaded (NIST) lowpressure connectors for medical gases partially supersedes BS EN ISO 5359:2008 ISBN members, non-members CH/121/6 BS EN 15911:2010 Foodstuffs. Simultaneous determination of nine sweeteners by high performance liquid chromatography and evaporative light scattering detection ISBN members, non-members AW/-/3 BS EN 15944:2010 (BS :2010) Liquid petroleum products. Determination of nickel and vanadium content. Inductively coupled plasma optical emission spectrometry method (ICP OES) ISBN members, non-members PTI/13 Available from the Institute of Petroleum, see the British Standards section foreword for ordering information BS EN ISO 19146:2010 Geographic information. Cross-domain vocabularies ISBN members, non-members IST/36 BS EN 50191:2010 Erection and operation of electrical test equipment supersedes BS EN 50191:2001 ISBN PEL/99 BS EN 50310:2010 Application of equipotential bonding and earthing in buildings with information technology equipment supersedes BS EN 50310:2006 ISBN members, non-members TCT/7 BS EN 50386:2010 Bushings up to 1 kv and from 250 A to 5 ka, for liquid filled transformers supersedes BS EN 50386:2002 ISBN members, non-members PEL/36 BS EN :2010 Letter symbols to be used in electrical technology. Power generation, transmission and distribution ISBN members, non-members SS/7 BS EN :2010 Rotating electrical machines. Rating and performance supersedes BS EN :2004 which remains current ISBN members, non-members PEL/2 BS EN :2010 Specifications for particular types of winding wires. Polyamide-imide enamelled round copper wire, class 220 ISBN members, non-members GEL/55 BS EN :2010 Safety of household and similar appliances. Particular requirements for pedestriancontrolled walk-behind electrically powered lawn mowers supersedes BS EN 50338:2006 and BS EN :2006 which remain current ISBN members, non-members CPL/61/23 BS EN :2010 Terms and nomenclature for cores made of magnetically soft ferrite. Reference of dimensions supersedes BS EN :2003 ISBN members, non-members EPL/51 BS EN :2010 Connectors for electronic equipment. Tests and measurements. Cable clamping tests. Test 17a. Cable clamp robustness supersedes BS :1993 which remains current ISBN members, non-members EPL/48 BS EN :2010 Connectors for electronic equipment. Tests and measurements. Cable clamping tests. Test 17c. Cable clamp resistance to cable pull (tensile) supersedes BS :1993 which remains current ISBN members, non-members EPL/48 BS EN :2010 Connectors for electronic equipment. Tests and measurements. Cable clamping tests. Test 17d. Cable clamp resistance to cable torsion supersedes BS :1993 which remains current ISBN members, non-members EPL/48 BS EN :2010 Cable networks for television signals, sound signals and interactive services. Safety supersedes BS EN :2005 ISBN members, non-members EPL/100/4 BS EN ISO 24500:2010 Ergonomics. Accessible design. Auditory signals for consumer products ISBN members, non-members PH/9/1 BS EN :2010 Specifications for particular types of winding wires. Polyamide-imide enamelled rectangular copper wire, class 220 ISBN members, non-members GEL/55 BS EN :2010 Optical fibres. Measurement methods and test procedures. Bandwidth supersedes BS EN :2003 ISBN GEL/86/1 16 Prices may be subject to change. Update Standards Jan 2011

17 BS EN :2010 Safety requirements for electrical equipment for measurement, control, and laboratory use. General requirements supersedes BS EN :2001 which remains current ISBN members, non-members EPL/66 BS ENs IMPLEMENTED BY AMENDMENT For the standards listed below see also the Corrigenda to British Standards and Updated British Standards sections of this issue of Update Standards. BS ISO :2010 Water quality. Sampling. Guidance on sampling of drinking water distributed by tankers or means other than distribution pipes ISBN EH/3/6 BS EN :2010 Safety requirements for electrical equipment for measurement, control, and laboratory use. Particular requirements for testing and measuring circuits ISBN members, non-members EPL/66 BS EN :2010 Industrial communication networks. Profiles. Fieldbus profiles supersedes BS EN :2008 ISBN members, non-members AMT/7 BS EN :2010 Industrial communication networks. Profiles. Additional fieldbus profiles for real-time networks based on ISO/IEC supersedes BS EN :2008 ISBN members, non-members AMT/7 BS EN :2010 Industrial communication networks. Profiles. Functional safety fieldbuses. General rules and profile definitions supersedes BS EN :2008 ISBN members, non-members AMT/7 BS EN :2010 Semiconductor devices. Micro-electromechanical devices. Generic specification for MEMS ISBN EPL/47 BS EN 62508:2010 Guidance on human aspects of dependability ISBN members, non-members DS/1 BS EN ISO :2010 Acoustics. Measurement of sound insulation in buildings and of building elements using sound intensity. Field measurements EH/1/6 Implementation of European Standard EN ISO by amendment to BS ISO :2003 BS EN ISO :2010 Acoustics. Measurement of sound insulation in buildings and of building elements using sound intensity. Laboratory measurements at low frequencies EH/1/6 Implementation of European Standard EN ISO by amendment to BS ISO :2002 BS IMPLEMENTATIONS BS Implementations comprise the ISO or IEC text without any national deviation and with front and back cover indicating the UK committee responsible. No other information will normally be added. Note: The date referenced in the identifier is the date of the international standard. BS ISO 362-2:2009 Measurement of noise emitted by accelerating road vehicles. Engineering method. L category supersedes BS ISO 362:1998 ISBN members, non-members EH/1/2 BS ISO 3987:2010 (BS :2010) Petroleum products. Determination of sulfated ash in lubricating oils and additives supersedes BS :1996 ISBN members, non-members PTI/13 Available from the Institute of Petroleum, see the British Standards section foreword for ordering information BS ISO :2010 Motorcycle tyres and rims (metric series). Design guides supersedes BS ISO :2004 ISBN AUE/4 BS ISO :2010 Motorcycle tyres and rims (metric series). Tyre dimensions and load-carrying capacities supersedes BS ISO :2004 ISBN members, non-members AUE/4 BS ISO :2010 Motorcycle tyres and rims (metric series). Range of approved rim contours supersedes BS ISO :2004 ISBN members, non-members AUE/4 BS ISO :2010 Reciprocating internal combustion engines. Vocabulary of components and systems. Valves, camshaft drives and actuating mechanisms supersedes BS :1988 ISBN members, non-members MCE/14 BS ISO 8942:2010 Rubber compounding ingredients. Carbon black. Determination of individual pellet crushing strength ISBN members, non-members PRI/50 BS ISO :2010 Pneumatic fluid power. Electro-pneumatic continuous flow control valves. Main characteristics to include in the supplier s literature ISBN MCE/18/-/5 Update Standards Jan 2011 Prices may be subject to change. 17

18 BS Implementations continued... BS ISO :2010 Pneumatic fluid power. Electro-pneumatic continuous flow control valves. Test methods to determine main characteristics to include in the supplier s literature ISBN members, non-members MCE/18/-/5 BS ISO 12406:2010 Surface chemical analysis. Secondary-ion mass spectrometry. Method for depth profiling of arsenic in silicon ISBN CII/60 BS ISO/IEC :2010 Information technology. Radio frequency identification for item management. Parameters for air interface communications at 13,56 MHz supersedes BS ISO/IEC :2004 ISBN members, non-members IST/34 BS ISO :2010 Pneumatic fluid power. Electro-pneumatic pressure control valves. Main characteristics to include in the supplier s literature ISBN MCE/18/-/5 BS ISO :2010 Pneumatic fluid power. Electro-pneumatic pressure control valves. Test methods to determine main characteristics to include in the supplier s literature ISBN members, non-members MCE/18/-/5 BS ISO/IEC :2010 Information technology. Security techniques. Hash-functions. Hash-functions using an n-bit block cipher ISBN members, non-members IST/33 BS ISO 11171:2010 Hydraulic fluid power. Calibration of automatic particle counters for liquids supersedes BS ISO 11171:1999 ISBN members, non-members MCE/18/-/6 BS ISO 11527:2010 Building construction. Sealants. Test method for the determination of stringiness ISBN members, non-members B/547 BS ISO/IEC :2010 Information technology. Topic Maps. Compact syntax ISBN IST/41 BS ISO :2010 Acoustics. Measurement of sound absorption properties of road surfaces in situ. Spot method for reflective surfaces ISBN EH/1/2 BS ISO/IEC :2010 Identification cards. Contactless integrated circuit cards. Vicinity cards. Physical characteristics supersedes BS ISO/IEC :2000 ISBN members, non-members IST/17 BS ISO 16162:2010 Continuously cold-rolled steel sheet products. Dimensional and shape tolerances supersedes BS ISO 16162:2005 ISBN members, non-members ISE/109 BS ISO :2010 Graphic technology. Variable data exchange. Using PDF/X-4 and PDF/X-5 (PDF/VT-1 and PDF/VT-2) ISBN members, non-members PAI/43 BS ISO 19899:2010 Plastics piping systems. Polyolefin pipes and mechanical fitting assemblies. Test method for the resistance to end load (AREL test) ISBN members, non-members PRI/88/4 BS ISO 20906:2009 Acoustics. Unattended monitoring of aircraft sound in the vicinity of airports ISBN members, non-members EH/1/2 BS ISO 21215:2010 Intelligent transport systems. Communications access for land mobiles (CALM). M5 ISBN members, non-members EPL/278 BS ISO 21748:2010 Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty estimation supersedes DD ISO/TS 21748:2004 ISBN members, non-members SS/6 BS ISO 22967:2010 Forced draught gas burners ISBN members, non-members GSE/27 BS ISO 22968:2010 Forced draught oil burners ISBN members, non-members GSE/27 BS ISO :2010 Tractors and machinery for agriculture and forestry. Serial control and communications data network. Virtual terminal supersedes BS ISO :2004 ISBN members, non-members AGE/6 BS ISO :2010 Measurement of fluid flow in closed conduits. Ultrasonic meters for gas. Meters for custody transfer and allocation measurement ISBN members, non-members CPI/30/5 BS ISO 23529:2010 Rubber. General procedures for preparing and conditioning test pieces for physical test methods supersedes BS ISO 23529:2004 ISBN PRI/22 18 Prices may be subject to change. Update Standards Jan 2011

19 BS ISO :2010 Language resource management. Word segmentation of written texts. Basic concepts and general principles ISBN TS/1 BS ISO 26642:2010 Food products. Determination of the glycaemic index (GI) and recommendation for food classification ISBN AW/-/3 BS ISO :2010 Plastics. Preparation of test specimens of thermoplastic materials using mouldless technologies. General principles, and laser sintering of test specimens ISBN members, non-members PRI/82 BS ISO 27608:2010 Animal and vegetable fats and oils. Determination of Lovibond colour. Automatic method ISBN members, non-members AW/307 BS ISO 29664:2010 Plastics. Artificial weathering including acidic deposition ISBN PRI/21 BS ISO 30023:2010 Textiles. Qualification symbols for labelling workwear to be industrially laundered ISBN members, non-members TCI/82 PUBLISHED DOCUMENTS PD ISO/IEC TR :2010 Systems and software engineering. Life cycle management. Guide for life cycle management ISBN members, non-members IST/15 PD CLC/TR :2010 OPC unified architecture. Overview and concepts ISBN AMT/7 DRAFTS FOR DEVELOPMENT DD CEN ISO/TS 22117:2010 Microbiology of food and animal feeding stuffs. Specific requirements and guidance for proficiency testing by interlaboratory comparison ISBN members, non-members AW/9 DD IEC/PAS :2010 Printed boards. Device embedded substrate. Terminology/reliability/design guide ISBN members, non-members EPL/501 AEROSPACE SERIES BS 2HR 505:2010 Specification for nickel-chromium-iron-titaniumniobium-aluminium heat-resisting alloy round wire with a maximum diameter of 2 mm for thread inserts (nickel base Cr 15.5, Fe 7.0, Ti 2.5, Nb/Ta 0.95, Al 0.70) supersedes BS HR 505:1981 ISBN members, non-members ACE/61 BS 4HR 601:2010 Specification for nickel-chromium-titaniumaluminium heat-resisting alloy bar and wire (maximum diameter or minor sectional dimension of 30 mm) for the manufacture of fasteners (nickel base, Cr 19.5, Ti 2.2, Al 1.4) supersedes BS 3HR 601:1989 ISBN members, non-members ACE/61 CORRIGENDA TO BRITISH STANDARDS Most amendments are not issued separately. Those that make significant changes to a standard are incorporated into the standard which is reissued (see Updated British Standards ). British Standards which have been corrected via corrigenda are available on request, free of charge to past purchasers of the standard. All amendments and corrigenda to date of despatch are included within any main publication when ordered for the first time. The following corrigenda to British Standards were made available last month. BS 7619:2010 Extruded cellular unplasticized white PVC (PVC- UE) profiles. Specification CORRIGENDUM 1 PRI/82 BS :2008+A1:2010 Screeds, bases and in situ floorings. Synthetic resin floorings. Code of practice CORRIGENDUM 1 B/507/6 Also incorporates Amendment 1 BS EN 343:2003+A1:2007 Protective clothing. Protection against rain CORRIGENDUM 1 PH/3 Also incorporates Amendment 1 BS EN 975-1:2009 Sawn timber. Appearance grading of hardwoods. Oak and beech CORRIGENDUM 1 B/543 PD 6697:2010 Recommendations for the design of masonry structures to BS EN and BS EN supersedes BS :2005, BS :2005 and BS :2005 ISBN members, non-members B/525/6 BS 2HR 506:2010 Specification for nickel-chromium-cobalttitanium-aluminium heat-resisting alloy wire: softened (nickel base, Cr 19.5, Co 1.8, Ti 2.5, Al 1.5) supersedes BS HR 506:1989 ISBN members, non-members ACE/61 BS EN 1276:2009 Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in food, industrial, domestic and institutional areas. Test method and requirements (phase 2, step 1) CORRIGENDUM 1 CH/216 Update Standards Jan 2011 Prices may be subject to change. 19

20 Corrigenda to British Standards continued... BS EN 1656:2009 Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in the veterinary area. Test method and requirements (phase 2, step 1) CORRIGENDUM 1 CH/216 BS EN :2009 Firefighting and rescue service vehicles. Common requirements. Safety and performance CORRIGENDUM 1 FSH/17/9 BS EN :2005 Aerospace series. Metallic materials. Test methods. Tensile testing at elevated temperature CORRIGENDUM 1 ACE/61/-/6 BS EN 2090:2005 Aerospace series. Aluminium alloy AL-P2024-T3. Clad sheet and strip 0,3 mm µ a µ 6 mm CORRIGENDUM 1 ACE/61/-/24 BS EN 4007:2005 Aerospace series. Aluminium alloy AL-P6082-T6 or T62. Sheet and strip. 0,4 mm µ a µ 6 mm CORRIGENDUM 1 ACE/61/-/24 BS EN 4136:2009 Aerospace series. Bolts, normal bi-hexagonal head, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated. Classification: 1100 MPa at ambient temperature)/235 C CORRIGENDUM 1 ACE/12 BS EN 4202:2005 Aerospace series. Aluminium alloy AL-P6082- T651. Plate. 6 mm < a µ 25 mm CORRIGENDUM 1 ACE/61/-/24 BS EN 9100:2009 Quality management systems. Requirements for aviation, space and defense organizations CORRIGENDUM 1 ACE/1 BS EN ISO :October 2009 Biological evaluation of medical devices. Evaluation and testing within a risk management process CORRIGENDUM 2 CH/194 Also incorporates Corrigenda 1 BS EN ISO :2009 Small craft. Hull construction and scantlings. Rudders CORRIGENDUM 1 GME/33 BS EN ISO :2010 Acoustics. Measurement of sound insulation in buildings and of building elements using sound intensity. Field measurements CORRIGENDUM 1 EH/1/6 BS EN ISO :2010 Acoustics. Measurement of sound insulation in buildings and of building elements using sound intensity. Laboratory measurements at low frequencies CORRIGENDUM 1 EH/1/6 BS EN 15432:2008 Winter and road service area maintenance equipments. Front-mounted equipments. Interchangeability CORRIGENDUM 1 B/513/-/16 BS EN :2010 Medical electrical equipment. Particular requirements for the basic safety and essential performance of automated non-invasive sphygmomanometers CORRIGENDUM 1 CH/62/4 BS ISO/IEC :2008 Identification cards. Recording technique. Magnetic stripe. High coercivity CORRIGENDUM 1 IST/17 BS ISO/IEC 19793:2008 Information technology. Open Distributed Processing. Use of UML for ODP Viewpoint Specifications CORRIGENDUM 1 IST/15 Help Us to Help You! Always quote your Customer Number Don t know your number? Contact Customer Services who will be happy to check it for you UPDATED BRITISH STANDARDS The following standards have been amended and the amendments have been incorporated into an updated standard. NOTE: Updated British Standards must be reordered as the amendments are not available separately. BS 8438:2004+A1:2010 Troughed belt conveyors. Specification AMENDMENT members, non-members MHE/9 Also incorporates Corrigenda 1 BS EN 12043:2000+A1:2010 Food processing machinery. Intermediate provers. Safety and hygiene requirements AMENDMENT members, non-members MCE/3/5 BS EN 13113:2002+A1:2010 Tannery machines. Roller coating machines. Safety requirements AMENDMENT members, non-members MCE/3 BS EN :2008+A1:2010 Swimming pools. Safety requirements for design AMENDMENT 1 SW/136/8 BS EN :2002+A14:2010 Household and similar electrical appliances. Safety. General requirements AMENDMENT members, non-members CPL/61 Also incorporates Amendments 11, 12 & 13 and Corrigenda 1, 2, 3, 4, 5, 6 & 7 BS EN :2004+A12:2010 Switches for household and similar fixed electrical installations. Particular requirements. Electronic switches AMENDMENT members, non-members PEL/23 Also incorporates Amendment 1 and Corrigenda 1 & 2 BS EN :2007+A11:2009 Hand-held motor-operated electric tools. Safety. Particular requirements for circular saws AMENDMENT members, non-members CPL/ Prices may be subject to change. Update Standards Jan 2011

21 BS EN :2003+A12:2009 Hand-held motor-operated electric tools. Safety. Particular requirements for hammers AMENDMENT 12 CPL/116 Also incorporates Amendments 1, 2 & 11 SPECIAL ANNOUNCEMENTS Comments can be sent by or by post to named contacts at: BSI Head Office 389 Chiswick High Road London W4 4AL Tel: BS EN Lead-acid starter batteries. Properties of battery housings and handles This standard which will be available shortly implements verbatim EN :2010. This European Standard covers multicell battery housings produced of polypropylene as the preferred material for lead-acid batteries as an energy storage device for cranking combustion engines, for lighting and for additional equipment used in road vehicles. These batteries are all referred to as starter batteries. This European Standard describes battery housings for batteries usable within the engine compartment and for installation under conditions where they are protected from light. Contact: Keith Stiles keith.stiles@bsigroup.com PEL/21 BRITISH STANDARDS REVIEWED AND CONFIRMED It is BSI policy for every standard to be reviewed by the technical committee responsible not more than five years after publication, to establish whether it is still current and, if it is not, to identify and set in hand appropriate action. Confirmation indicates the continuing currency of a standard. Where any standard in this list has been amended since publication, confirmation includes all amendments published to date. Reference to a particular amendment indicates that it is published concurrently with the confirmation. BS 182:1972 Specification for galvanized line-wire for telephone and telegraph purposes ISE/106 BS 183:1972 Specification for general purpose galvanized steel wire strand ISE/106 BS 192-1:1996 Open-ended wrenches. Metric and unified BS 227:1995 Specification for H-section steel arches for use in mines MRE/1 BS 248:1969 Specification for light rails and fishplates for use at mines MRE/1 BS 328-4:1983 Drills and reamers. Specification for dimensions of reamers MTE/18 BS 411:1969 Specification for circular saws for woodworking and their attachment MTE/20 BS 448-2:1981 Dimensions of electronic tubes and valves. Specification for dimensions of United Kingdom electronic tubes EPL/39 BS 498:1990 Specification for rasps and engineers files BS 506-1:1987 Methanol for industrial use. Specification for methanol BS 506-2:1984 Methanol for industrial use. Methods of test BS 508-2:1984 Butan-1-ol for industrial use. Methods of test BS 509-1:1987 Acetone for industrial use. Specification for acetone BS 509-2:1984 Acetone for industrial use. Methods of test BS 549:1970 Specification for diacetone alcohol BS 551:1990 Specification for butyl acetate for industrial use BS 552:1970 Specification for amyl acetate BS 553:1990 Specification for ethyl acetate for industrial use BS 576-1:1988 Acetic acid for industrial use. Specification for acetic acid BS 576-2:1988 Acetic acid for industrial use. Methods of test for acetic acid BS 579:1957 Specification for diethyl ether (technical) BS 662-1:1979 Carbon disulphide for industrial use. Specification BS 662-3:1979 Carbon disulphide for industrial use. Additional methods of test BS 90:1975 Specification for direct-acting electrical recording instruments and their accessories PEL/85 BS 115:1995 Specification for metallic resistance materials for electrical purposes GEL/55 BS 507:1985 Specification for ethanol for industrial use BS 508-1:1986 Butan-1-ol for industrial use. Specification for butan-1-ol BS 715:2005 Specification for metal flue boxes for gas-fired appliances not exceeding 20 kw GSE/4 BS 721-1:1963 Specification for worm gearing. Imperial units MCE/5 Update Standards Jan 2011 Prices may be subject to change. 21

22 British Standards Reviewed and Confirmed continued... BS 721-2:1983 Specification for worm gearing. Metric units MCE/5 BS 787-1:1969 Specification for mining type flameproof gateend boxes. Gate-end boxes for direct-on-line motor starting (for use on 3-phase A.C. circuits up to 650 V) MRE/3 BS 787-2:1968 Specification for mining type flameproof gateend boxes. Gate-end boxes with air-break circuit-breakers (for use on 3-phase A.C. circuits up to 650 volts) MRE/3 BS 787-3:1971 Specification for mining type flameproof gateend boxes. Gate-end boxes with lighting transformers MRE/3 BS 787-4:1972 Specification for mining type flameproof gateend boxes. Gate-end boxes for drilling machines (for use on 3-phase A.C. circuits up to 650 V) MRE/3 BS 876:1995 Specification for hand hammers BS 949-2:1992 Screwing taps. Specification for unified ground thread taps. Manufacturing tolerances MTE/18 BS 978-1:1968 Specification for fine pitch gears. Involute spur and helical gears MCE/5 BS 978-2:1952 Specification for fine pitch gears. Cycloidal type gears MCE/5 BS 978-2:Addendum No. 1:1959 (PD 3376:1959) Gears for instruments and clockwork mechanisms. Cycloidal type gears. Double circular arc type gears MCE/5 BS 978-3:1952 Specification for fine pitch gears. Bevel gears MCE/5 BS 1090:1970 Specification for flameproof hand-held electric drilling machines primarily for use in mines MRE/1 BS :1991 Packaging code. Wooden boxes, cases and crates PKW/0 BS :2004 Humidity. Guide to the measurement of humidity CPI/29 BS 1421:1995 Specification for picks, beater picks and mattocks BS 1429:1980 Specification for annealed round steel wire for general engineering springs ISE/106 BS 1545:1990 Specification for liquid toilet soap CII/34 BS :1986 Propan-2-ol (isopropyl alcohol) for industrial use. Specification for propan-2-ol (isopropyl alcohol) BS :1984 Propan-2-ol (isopropyl alcohol) for industrial use. Methods of test BS :1988 Machine tapers. Specification for turret sockets and reduction sleeves with tapped ends for tools with Morse taper shanks MTE/18 BS :1988 Machine tapers. Specification for extension adaptors with external 7/24 tapers for tools with Morse taper shanks MTE/18 BS :1989 Analysis of soaps. Quantitative test methods. Method for determination of free fatty acids content CII/34 BS 1813:1974 Specification for dimensions of conduit dies, diestocks and guides MTE/18 BS 1834:1968 Specification for isopropyl acetate BS 1835:1991 Specification for 2-ethylhexan-1-ol for industrial use BS 1842:1952 Specification for double-ended open-jawed spanners for B.A. hexagon sizes BS :1995 Tubular fluorescent lamps for general lighting service. Specification for lamps used in the United Kingdom not included in BS EN 60081, BS EN 60901, BS EN and BS EN CPL/34/1 BS 1911:1990 Specification for hard soap CII/34 BS 1912:1990 Specification for soap flakes CII/34 BS 1913:1990 Specification for soft soap CII/34 BS 1914:1990 Specification for toilet soap CII/34 BS :1993 Hacksaw blades. Specification for hand and machine hacksaw blades MTE/20 BS :1995 Hacksaw blades. Specification for cutting performance MTE/20 BS 1937:1953 Specification for engineers ratchet braces and drilling pillars BS 1052:1980 Specification for mild steel wire for general engineering purposes ISE/106 BS :1990 Analysis of soaps. Quantitative test methods. Method for determination of EDTA content CII/34 BS 1940:1987 Specification for butanone (ethyl methyl ketone) for industrial use 22 Prices may be subject to change. Update Standards Jan 2011

23 BS 1941:1993 Specification for 4-methylpentan-2-one (isobutyl methyl ketone) for industrial use BS 1943:1989 Specification for woodworking chisels and gouges BS 1978:1965 Specification for bit braces BS 1994:1993 Specification for dichloromethane (methylene chloride) BS 2007:1975 Specification for circular gear shaving cutters, 1 to 8 metric module, accuracy requirements MCE/5 BS 2045:1965 Preferred numbers GME/1 BS 2049:1985 Specification for paraffin lighting appliances for domestic use CW/31 BS 2054:1953 Specification for augers and auger bits BS 2068:1970 Specification for acetic anhydride BS 2090:1954 Specification for hook spanners, peg spanners, coupling wrenches and the related slots, holes and horns BS 2453:1973 Specification for steel wire for spokes ISE/106 BS 2511:1970 Methods for the determination of water (Karl Fischer method) ISE/102 BS :1954 Specification for rotary form relieved gear cutters. Diametral pitch MCE/5 BS :1977 Specification for rotary form relieved gear cutters. Metric module MCE/5 BS 2556:1973 Specification for hand and breast drills BS 2558:1954 Specification for tubular box spanners BS 2558:Supplement No. 1:1968 Metric sizes BS :1973 Specification for screwdrivers. Insulated screwdrivers BS 2559:1994 Specification for screwdrivers and screwdriver accessories BS 2583:1955 Specification for podger spanners BS 2589:1955 Specification for railway track spanners BS 2593:1974 Specification for rotary drill rods and tungsten carbide tipped rotary drill bits MRE/1 BS 2697:1976 Specification for rack type gear cutters, metric module MCE/5 BS 2713:1966 Specification for 2-ethoxyethanol (ethylene glycol monoethyl ether) BS 2797:1976 Specification for leathers for gas meter diaphragms BS 2857:1976 Specification for nickel-iron transformer and choke laminations EPL/51 BS 2945:1995 Specification for axes and hatchets BS 2957:1958 Specification for fireman s axe with ash handle BS 2982:1992 Specification for materials and packaging of surgical scalpels with detachable blades CH/170 BS 3046:1981 Specification for adhesives for hanging flexible wallcoverings PRI/52 BS 3054:1959 Specification for fireman s axe with rubber insulated handle BS 3066:1995 Specification for engineers cold chisels and allied tools BS :1991 Pliers and nippers. General introduction BS :1991 Pliers and nippers. Specification for dimensions of tools not standardized by ISO BS 3088:1959 Specification for adjustable hand reamers with inserted blades MTE/18 BS 3101:1986 Specification for control and interlock circuits primarily associated with flameproof restrained plugs and sockets for use in coal mines MRE/3 BS 3123:1959 Specification for spring calipers and spring dividers BS 3138:1992 Glossary of terms used in management services MS/1 BS 3144:Addendum No. 1:1981 Sampling and physical testing of leather. Determination of resistance to bending and abrasion of heavy leather BS 3144:Addendum No. 2:1981 Sampling and physical testing of leather. Measurement of water vapour absorption Update Standards Jan 2011 Prices may be subject to change. 23

24 British Standards Reviewed and Confirmed continued... BS :1999 Woodworking saws for hand use. Specification for hand saws BS :1993 Woodworking saws for hand use. Specification for tenon and dovetail saws BS 3237:1960 Specification for light and medium rolling stock for mineral haulage in mines MRE/1 BS 3300:1985 Specification for paraffin unflued space heating and cooking appliances for domestic use CW/31 BS 3322:1981 Specification for carpenters squares and bevels BS :1961 Methods for the sampling and analysis of tin and tin alloys. Method for the determination of tin in ingot tin (aluminium reduction method) NFE/27 BS :1961 Methods for the sampling and analysis of tin and tin alloys. Method for the determination of antimony in ingot tin (photometric method) NFE/27 BS :1961 Methods for the sampling and analysis of tin and tin alloys. Method for the determination of copper in ingot tin and tin-lead solders (photometric method) NFE/27 BS :1961 Methods for the sampling and analysis of tin and tin alloys. Method for the determination of lead in ingot tin and tin-antimony solders (photometric method) NFE/27 BS :1961 Methods for the sampling and analysis of tin and tin alloys. Method for the determination of copper in high purity ingot tin (photometric method) NFE/27 BS :1961 Methods for the sampling and analysis of tin and tin alloys. Method for the determination of silver in solders (volumetric: ammonium thiocyanate method) NFE/27 BS :1961 Methods for the sampling and analysis of tin and tin alloys. Method for the determination of bismuth in ingot tin, tin-lead solders and white metal bearing alloys (photometric method) NFE/27 BS :1965 Methods for the sampling and analysis of tin and tin alloys. Method for the determination of arsenic in ingot tin, solders and white metal bearing alloys (photometric method) NFE/27 BS :1961 Methods for the sampling and analysis of tin and tin alloys. Method for the determination of iron in ingot tin, tin-lead solders and white metal bearing alloys (photometric method) NFE/27 BS :1961 Methods for the sampling and analysis of tin and tin alloys. Method for the determination of tin in solders (nickel coil reduction method) NFE/27 BS :1965 Methods for the sampling and analysis of tin and tin alloys. Method for the determination of antimony in solders and white metal bearing alloys (volumetric: potassium bromate method) NFE/27 BS :1965 Methods for the sampling and analysis of tin and tin alloys. Method for the sampling of white metal bearing alloy ingots NFE/27 BS :1965 Methods for the sampling and analysis of tin and tin alloys. Method for the determination of copper and lead in white metal bearing alloys (electrodeposition method) NFE/27 BS :1965 Methods for the sampling and analysis of tin and tin alloys. Method for the determination of tin in white metal bearing alloys (nickel coil reduction method) NFE/27 BS :1965 Methods for the sampling and analysis of tin and tin alloys. Method for the determination of cadmium in solders and white metal bearing alloys (photometric method) NFE/27 BS :1966 Methods for the sampling and analysis of tin and tin alloys. Method for the determination of aluminium in solders and white metal bearing alloys (photometric method) NFE/27 BS :1966 Methods for the sampling and analysis of tin and tin alloys. Method for the determination of zinc in solders and white metal bearing alloys (photometric method) NFE/27 BS :1970 Methods for the sampling and analysis of tin and tin alloys. Method for the determination of nickel in capping metal (photometric method) NFE/27 BS :1983 Methods for the sampling and analysis of tin and tin alloys. Determination of high cadmium content of soft solders NFE/27 BS 3388:2004 Forks, shovels and spades. Requirements and test methods BS :1987 Testing coated fabrics. Methods 12A and 12B Determination of surface drag BS :1985 Testing coated fabrics. Method 16. Methods for determination of colour fastness to wet and dry rubbing and determination of resistance to printwear BS :1987 Testing coated fabrics. Method 20. Method for determination of dimensional stability to water immersion BS :1986 Testing coated fabrics. Methods 21A and 21B. Methods for determination of resistance to wicking and lateral leakage BS :1989 Testing coated fabrics. Methods 22A, 22B and 22C. Determination of sulphur staining BS :1987 Testing coated fabrics. Method 23. Method for determination of dimensional changes on mechanical relaxation at zero tension BS :1993 Testing coated fabrics. Method 24. Method for determination of elongation and tension set 24 Prices may be subject to change. Update Standards Jan 2011

25 BS :1983 Testing coated fabrics. Method 25. Methods for determination of fusion of PVC coatings and the state of cure of vulcanized rubber coatings BS :1993 Testing coated fabrics. Method 28. Method for determination of the coating thickness and thickness of any expanded layer BS :1990 Testing coated fabrics. Method 34. Method for determination of resistance to scuffing and snagging BS :1992 Testing coated fabrics. Method 37. Method for determination of water vapour permeability index (WVPI) BS :1993 Testing coated fabrics. Method 39. Method for determination of the dimensional stability of coated fabrics to domestic washing BS 3555:1988 Specification for ring wrenches BS 3591:1985 Specification for industrial methylated spirits BS :1963 Specification for pipe wrenches. Stillson type wrenches BS :1965 Specification for pipe wrenches. Footprint type wrenches BS :1969 Glossary of mining terms. Planning and surveying MRE/1 BS :1971 Glossary of mining terms. Ventilation MRE/1 BS :1971 Glossary of mining terms. Boring and exploration MRE/1 BS :1971 Glossary of mining terms. Drainage MRE/1 BS :1971 Glossary of mining terms. Geology MRE/1 BS :1972 Glossary of mining terms. Drilling and blasting MRE/1 BS :1973 Glossary of mining terms. Electrical engineering and lighting MRE/1 BS :1974 Glossary of mining terms. Winning and working MRE/1 BS :1974 Glossary of mining terms. Shafts and associated equipment MRE/1 BS :1967 Glossary of mining terms. Transport MRE/1 BS :1967 Glossary of mining terms. Strata control MRE/1 BS 3623:1981 Specification for woodworkers metal-bodied planes BS 3632:2005 Residential park homes. Specification B/511 BS 3674:1981 Specification for sodium carbonate (technical grades) CII/26 BS 3693:1992 Recommendations for design of scales and indexes on analogue indicating instruments PEL/85 BS :1989 Analysis of formulated detergents. Qualitative test methods CII/34 BS :1989 Analysis of formulated detergents. Quantitative test methods. Methods for determination of short-chain alkylbenzenesulphonates content CII/34 BS :1989 Analysis of formulated detergents. Quantitative test methods. Method for determination of free formaldehyde content CII/34 BS :1985 Analysis of formulated detergents. Quantitative test methods. Method for determination of ammonia content CII/34 BS :1985 Analysis of formulated detergents. Quantitative test methods. Method for determination of carbonate content CII/34 BS :1985 Analysis of formulated detergents. Quantitative test methods. Method for estimation of carboxymethylcellulose content CII/34 BS :1985 Analysis of formulated detergents. Quantitative test methods. Method for determination of chloride content CII/34 BS :1989 Analysis of formulated detergents. Quantitative test methods. Methods for determination of water and volatile matter content CII/34 BS :1989 Analysis of formulated detergents. Physical test methods. Method for determination of clear point of liquid detergents CII/34 BS 3788:1984 Specification for tin coated finish on culinary utensils CW/9 BS 3823:1990 Grading of ash and hickory wood handles for hand tools BS 3831:1964 Specification for vitreous enamel finishes for domestic and catering appliances STI/36 BS :1990 Rope rollers, pulleys, mountings and assemblies for colliery track haulage. Specification for parallel barrel rollers, mountings and assemblies MRE/1 Update Standards Jan 2011 Prices may be subject to change. 25

26 British Standards Reviewed and Confirmed continued... BS :1990 Rope rollers, pulleys, mountings and assemblies for colliery track haulage. Specification for vertical spindle pulleys, mountings and assemblies MRE/1 BS :1990 Rope rollers, pulleys, mountings and assemblies for colliery track haulage. Specification for suspended pulley assemblies and clamps MRE/1 BS 3877:1991 Specification for metal cutting bandsaw blades MTE/20 BS 3905:1995 Specification for 3.8/6.6 kv, 300 A bolted flameproof cable couplers and adaptors, for use in coal mines. MRE/3 BS 3935:1991 Guide to classification and marking of cattle hides and calfskins BS 3947:1976 Specification for liquid chlorine CII/26 BS 3984:1982 Specification for sodium silicates CII/26 BS 3993:1966 Specification for hydrochloric acid, commercial types 1 and 2 CII/26 BS 4006:1992 Specification for hand operated square drive socket wrenches and accessories BS 4034:1990 Specification for vitrified hotelware CW/29 BS 4073:1966 Specification for heavy rolling stock for mineral haulage in mines MRE/1 BS :1987 Powder actuated fixing systems. Code of practice for safe use MTE/21 BS :1989 Powder actuated fixing systems. Specification for tools MTE/21 BS 4087:1989 Specification for copper-covered steel wire for telephone and telegraph purposes ISE/106 BS 4102:1998 Specification for steel wire for general fencing purposes ISE/106 BS 4105:1990 Specification for liquid carbon dioxide, industrial CII/19 BS :1992 Conveyor chains, their attachments and associated chain wheels. Specification for chains and attachments (British series) MCE/1 BS 4130:1984 Specification for sodium hydroxide (technical grades) CII/26 BS :1968 Methods of measurement of the electrical properties of electronic tubes and valves (excluding microwave devices). Essential conditions for measuring equivalent input and output admittances EPL/39 BS 4341:1968 Methods of test for formic acid BS 4341:Addendum No. 1:1971 Methods of test for formic acid BS 4393:1991 Specification for solderable tin or tin-lead coated wires for component terminations NFE/27 BS 4405:1990 Specification for liquid soap CII/34 BS 4411:1969 Specification for woodcutting bandsaw blades MTE/20 BS :1969 Recommendations for the safety of powered industrial trucks. Operation and maintenance MHE/7 BS 4462:1969 Guide for the preparation of technical sales literature for measuring instruments and process control equipment CPI/704 BS 4478:1969 Methods of measurement of intermodulation products in electronic tubes or valves intended for use in colour television transposers EPL/39 BS :1978 Specification for fine pitch gears (metric module). Hobs and cutters MCE/5 BS 4583:1991 Methods of test for higher alcohols for industrial use BS 4633 and 4634:1970 Method for the determination of crystallizing point. Method for the determination of melting point and/or melting range ISE/102 BS 4637:1970 Specification for carbon steel wire for coiled springs (bedding and seating) ISE/106 BS 4638:1970 Specification for carbon steel wire for zigzag and square-form springs ISE/106 BS :Group 12:1990 Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to power engineering. Telecontrol terminology GEL/1 BS 4774:1972 Methods of test for chloroform for industrial use BS 4789:1972 Specification for ceramic components for use in envelopes for electronic tubes EPL/39 BS 4791:1985 Specification for calorimeter bombs LBI/22 BS 4835:1973 Methods of test for plasticizer esters CII/26 BS 4854:1972 Specification for cars for manriding in mines MRE/1 BS 4878:1973 Specification for large (vee-throated) haulage rope pulleys for mines and quarries MRE/1 26 Prices may be subject to change. Update Standards Jan 2011

27 BS :1992 Technical manuals. Specification for presentation of essential information IDT/2/10 BS :1993 Technical manuals. Guide to content IDT/2/10 BS :1993 Technical manuals. Guide to presentation IDT/2/10 BS 4900:1976 Specification for vitreous enamel colours for building purposes STI/36 BS 4981:1984 Specification for Mondopoint footwear sizing and marking system BS 5067:1985 Specification for flameproof transformers for use in mines MRE/3 BS 5125:1990 Specification for 50 A 650 V flameproof, restrained and bolted plugs and sockets for use in coal mines MRE/3 BS :1993 Mining type flameproof supply and control units for use on systems up to 1100 V. Specification for direct-on-line motor starters MRE/3 BS :1993 Mining type flameproof supply and control units for use on systems up to 1100 V. Specification for circuit breaker units MRE/3 BS :1993 Mining type flameproof supply and control units for use on systems up to 1100 V. Specification for air-cooled lighting transformer units MRE/3 BS :1991 Methods of test for footwear and footwear materials. Adhesives. Resistance of adhesive joints to heat (creep test) BS :1991 Methods of test for footwear and footwear materials. Adhesives. Resistance of adhesive joints to peeling BS :1991 Methods of test for footwear and footwear materials. Adhesives. Preparation of test assemblies using adhesives (other than hot melt adhesives) for heat resistance (creep) and peel tests BS :1979 Methods of test for footwear and footwear materials. Adhesives. Recommended environmental storage conditions for adhesive joints prior to heat resistance or peeling tests BS :1991 Methods of test for footwear and footwear materials. Adhesives. Preparation of test assemblies using hot melt adhesives for heat resistance (creep) and peel tests BS :1981 Methods of test for footwear and footwear materials. Adhesives. Rate of bond strength development in shear of hot melt adhesives for lasting BS :1985 Methods of test for footwear and footwear materials. Adhesives. Measurement of green strength of adhesive joints BS :1991 Methods of test for footwear and footwear materials. Solings. Ross flexing method for cut growth resistance of soling materials BS :1991 Methods of test for footwear and footwear materials. Uppers, textiles and threads. Strength of upper materials and lining materials at right angles to stitch perforations BS :1978 Methods of test for footwear and footwear materials. Uppers, textiles and threads. Edgewise compressibility, upper materials BS :1978 Methods of test for footwear and footwear materials. Uppers, textiles and threads. The break/pipiness test BS :1991 Methods of test for footwear and footwear materials. Uppers, textiles and threads. Abrasion resistance of shoe laces BS :1991 Methods of test for footwear and footwear materials. Uppers, textiles and threads. Breaking strength of shoe laces BS :1975 Methods of test for footwear and footwear materials. Other components. Resistance to peeling of insole board BS :1990 Methods of test for footwear and footwear materials. Other components. Flexing index of fibreboard BS :1990 Methods of test for footwear and footwear materials. Other components. Tensile strength of fibreboard BS :1975 Methods of test for footwear and footwear materials. Other components. Shear strength of ribs stuck to insoles BS :1993 Mining type flameproof supply and control units for use on systems up to 1100 V. Specification for air-cooled transformers to power drilling machines MRE/3 BS :1990 Methods of test for footwear and footwear materials. General introduction BS :1980 Methods of test for footwear and footwear materials. Solings. The preparation of test pieces from soling materials for physical testing BS :1983 Methods of test for footwear and footwear materials. Solings. Resistance of solings to shortterm contact with a hot surface BS :1975 Methods of test for footwear and footwear materials. Other components. Resistance to peeling of ribs stuck to insoles BS :1990 Methods of test for footwear and footwear materials. Testing of complete footwear. Adhesion of stuck-on and moulded-on soles Update Standards Jan 2011 Prices may be subject to change. 27

28 British Standards Reviewed and Confirmed continued... BS :1990 Methods of test for footwear and footwear materials. Testing of complete footwear. Degree of vulcanization of moulded-on rubber soles BS :1990 Methods of test for footwear and footwear materials. Testing of complete footwear. Resistance of complete footwear to heat BS :1978 Methods of test for footwear and footwear materials. Testing of complete footwear. Sole bond peeling strength BS :1991 Methods of test for footwear and footwear materials. Testing of complete footwear. Impact test for rigid units and shoe bottoms BS :1978 Methods of test for footwear and footwear materials. Testing of complete footwear. Fatigue test for rigid units and shoe bottoms BS :1981 Methods of test for footwear and footwear materials. Testing of complete footwear. Determination of the strength of buckle fastening assemblies BS :1980 Methods of test for footwear and footwear materials. Testing of complete footwear. Measurement of the strength of stitched seams in upper and lining materials BS :1981 Methods of test for footwear and footwear materials. Codes of practice. Code of practice for the comparative evaluation by wear trial of materials, components or constructions BS :1979 Methods of test for footwear and footwear materials. Codes of practice. Code of practice for the identification in footwear wear trials of major weaknesses in design or construction and the assessment of fitness-for-purpose BS 5164:1975 Specification for indirect-acting electrical indicating and recording instruments and their accessories PEL/85 BS 5190:1985 Specification for pipeline filters, filter bodies and filter elements for milking installations AW/32 BS :1989 Surgical instruments. Specification for instruments with pivot joints (excluding cutting instruments) CH/170 BS :1985 Surgical instruments. Specification for dissecting forceps CH/170 BS :1985 Surgical instruments. Specification for scissors, shears and other jointed cutting instruments CH/170 BS 5226:1991 Code of practice for equipment and procedures for the cleaning and disinfecting of milking machine installations AW/17 BS 5246:1976 Specification for pinion type cutters for spur gears. 1 to 8 metric module MCE/5 BS :1989 Bonding agents for use with gypsum plasters and cement. Specification for polyvinyl acetate (PVAC) emulsion bonding agents for indoor use with gypsum building plasters PRI/52 BS 5305:1984 Code of practice for cleaning and disinfecting of plant and equipment used in the dairying industry AW/17 BS 5347:1976 Specification for silicon-iron strip-wound cores for use in transformers and inductors for telecommunications and electronic equipment EPL/51 BS :1987 Methods of test for adhesives. General introduction PRI/52 BS 5350-A1:1976 Methods of test for adhesives. Adherends. Adherend preparation PRI/52 BS 5350-A2:1990 Methods of test for adhesives. Adherends. Guide to the selection of adherend materials PRI/52 BS 5350-B5:1976 Methods of test for adhesives. Determination of gelation time PRI/52 BS 5350-C1:1986 Methods of test for adhesives. Adhesively bonded joints: mechanical tests. Determination of cleavage strength of adhesive bonds PRI/52 BS 5350-C7:1990 Methods of test for adhesives. Adhesively bonded joints: mechanical tests. Determination of creep and resistance to sustained application of force PRI/52 BS 5350-D4:1976 Methods of test for adhesives. Adhesively bonded joints: environmental tests. Determination of staining potential PRI/52 BS 5350-E1:1976 Methods of test for adhesives. Sampling and analysis of test data. Guide to statistical analysis PRI/52 BS 5350-G3:1987 Methods of test for adhesives. Determination of ability of anaerobic adhesives to set on metal surfaces PRI/52 BS 5350-C13:1990 Methods of test for adhesives. Adhesively bonded joints: mechanical tests. Climbing drum peel test PRI/52 BS 5350-C14:1979 Methods of test for adhesives. Adhesively bonded joints: mechanical tests. 90 peel test for a rigid-to-rigid assembly PRI/52 BS 5350-C15:1990 Methods of test for adhesives. Adhesively bonded joints: mechanical tests. Determination of bond strength in compressive shear PRI/52 BS 5416:1990 Specification for china tableware CW/29 BS 5443:1977 Recommendations for a standard layout for methods of chemical analysis by gas chromatography ISE/102 BS 5455:1977 Specification for polyurethane coated nylon fabric for mattress covers 28 Prices may be subject to change. Update Standards Jan 2011

29 BS :1995 Buildings and structures for agriculture. Guide to the storage and handling of waste B/549 BS :2005 Buildings and structures for agriculture. Code of practice for design and construction of cattle buildings B/549 BS :1986 Cinematography. Common to more than one gauge. Sound. Code of practice for the identification of systems for synchronization of unperforated audio tape with motion-picture film and videotape CPW/36 BS :1980 Methods for chemical analysis of rubber. EDTA titrimetric method for determination of zinc content of rubber products PRI/23 BS 5962:1980 Specifications for naphthalene (including test methods) BS :1994 Method of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of mesophase content CII/24 BS :1981 Methods of sampling and test for sodium and potassium silicates for industrial use. Determination of chloride content of sodium metasilicate CII/26 BS :1981 Methods of sampling and test for sodium and potassium silicates for industrial use. Limit test for sulphate content of sodium metasilicate CII/26 BS :1990 Machine tool ball screws. Specification for ball nuts and principal dimensions of ball screws BS :1980 Cinematography. Television usage. Recommendations for the density range, contrast and colour balance of films and slides for colour television CPW/36 BS 5577:1999 Specification for table cutlery with non-metallic handles CW/17 BS 5620:1995 Specification for 200 A 1100 V flameproof restrained and bolted plugs and sockets for use in coal mines MRE/1 BS 5634:1978 Methods of test for potassium hydroxide CII/26 BS :1986 Methods of test for orthoboric acid (boric acid), diboron trioxide (boric oxide), disodium tetraborates, sodium perborates and crude sodium borates for industrial use. General introduction CII/26 BS 5708:1979 Specification for pruner shears (secateurs) BS 5754:1987 Specification for electrical analogue and state signals for use in coal mines MRE/3 BS 5808:1991 Specification for underlays for textile floor coverings PRI/3 BS 5833:1988 Scheme for labelling of footwear BS :1994 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of particle size distribution of fine coke CII/24 BS :1981 Methods of sampling and test for sodium carbonate for industrial use. General introduction CII/26 BS :1981 Methods of sampling and test for sodium carbonate for industrial use. Determination of copper content CII/26 BS :1981 Methods of sampling and test for sodium hydroxide for industrial use. General introduction CII/26 BS :1981 Methods of sampling and test for sodium hydroxide for industrial use. Determination of copper content CII/26 BS :1981 Methods of sampling and test for sodium hydroxide for industrial use. Determination of matter insoluble in water CII/26 BS :1981 Methods of sampling and test for sodium and potassium silicates for industrial use. General introduction CII/26 BS :1981 Methods of sampling and test for sodium and potassium silicates for industrial use. Determination of matter insoluble in water CII/26 BS 6168:1987 Specification for non-metallic spur gears MCE/5 BS :1994 Intriniscally safe power supplies for use in coal mines. Specification for D.C. power supplies MRE/3 BS :1982 Intrinsically safe power supplies for use in coal mines. Specification for A.C. power supplies MRE/3 BS 6271:1982 Specification for miniature hacksaw blades MTE/20 BS 6353:1983 Specification for underground loudspeaker communication systems in coal mines MRE/3 BS :1989 Reagents for chemical analysis. Specifications (second series) CII/26 BS :1983 Testing of ethanol for industrial use. General introduction BS :1983 Testing of ethanol for industrial use. Method for detection of alkalinity or determination of acidity to phenolphthalein BS :1983 Testing of ethanol for industrial use. Method for determination of carbonyl compounds content present in small amounts (photometric method) Update Standards Jan 2011 Prices may be subject to change. 29

30 British Standards Reviewed and Confirmed continued... BS :1983 Testing of ethanol for industrial use. Method for determination of carbonyl compounds content present in moderate amounts (titrimetric method) BS :1983 Testing of ethanol for industrial use. Method for determination of aldehydes content BS :1983 Testing of ethanol for industrial use. Method of test for miscibility with water BS :1983 Testing of ethanol for industrial use. Method for determination of methanol content [0.01% (V/V) to 0.20% (V/V)] (photometric method) BS :1983 Testing of ethanol for industrial use. Method for determination of methanol content [0.10% (V/V) to 1.50% (V/V)] (visual colorimetric method) BS :1983 Testing of ethanol for industrial use. Method for determination of esters content BS :1983 Testing of ethanol for industrial use. Method for determination of permanganate time BS 6451:1984 Specification for netting and fibre rope load restraint systems in surface transport MHE/16 BS 6453:1984 Specification for performance of leathers for garments BS :1985 Low speed digital signals for use in coal mines. Specification for optical coupling MRE/3 BS :1985 Low speed digital signals for use in coal mines. Specification for transformer coupling MRE/3 BS :1985 Low speed digital signals for use in coal mines. Specification for message protocols MRE/3 BS :1987 Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment. Specification for the outline dimensions of transformers and inductors using YEI-1 laminations EPL/51 BS :1985 Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment. Specification for the outline dimensions of transformers and inductors using the Q range of C-cores EPL/51 BS 6680:1985 Specification for flameproof equipment for diesel engines for use in coal mines and other mines susceptible to firedamp MRE/1 BS 6704:1996 Code of practice for selection, installation and maintenance of intrinsically safe electrical equipment in coal mines MRE/3 BS 6705:1987 Specification for electrical measuring instruments for use on intrinsically safe circuits in coal mines MRE/3 BS 6708:1998 Flexible cables for use at mines and quarries MRE/3 BS 6709:1986 Specification for interconnection of electrical apparatus, constructed to two or more British Standards, for use in mines susceptible to firedamp MRE/3 BS 6710:1987 Specification for dimensions of chain wheel tooth forming tools MCE/5 BS 6715:1991 Specification for chamois leather BS 6716:1986 Guide to properties and types of rubber PRI/54 BS 6750:1986 Specification for modular coordination in building B/554 BS 6756:1986 Specification for fibre rope cargo nets MHE/16 BS :1987 Leisure accommodation vehicles. Caravans. Specification for undergear AUE/8 BS 6882:1987 Guide for storage of raw solid natural and synthetic rubber PRI/50 BS :1988 Electrical installations for open-cast mines and quarries. Glossary MRE/3 BS :1988 Electrical installations for open-cast mines and quarries. General recommendations for protection against direct contact and electric shock MRE/3 BS :1988 Electrical installations for open-cast mines and quarries. Recommendations for equipment and ancillaries MRE/3 BS :1988 Electrical installations for open-cast mines and quarries. Recommendations for winning, stacking and processing machinery, pumps and low signal level and communications systems MRE/3 BS :1988 Electrical installations for open-cast mines and quarries. Recommendations for operation MRE/3 BS :1989 Total Access Communication System (T.A.C.S). Specification for performance requirements for mobile stations EPL/102 BS :1989 Total Access Communication System (T.A.C.S). Specification for performance and tests of the signalling system of mobile stations EPL/102 BS 6997:1990 Specification for elastomeric toroidal sealing rings ( O -rings) manufactured from acrylonitrile-butadiene rubbers complying with BS 6996 PRI/54 BS 7019:1989 Specification for fully screened 400 A bolted flameproof cable couplers and adaptors for use on systems up to and including 6.6 kv, primarily for use in mines MRE/3 30 Prices may be subject to change. Update Standards Jan 2011

31 BS :1993 Chemical tests for raw and vulcanized rubber. Butadiene rubber. Method for determination of unsaturation PRI/23 BS 7194:1990 Specification for direct-current and lowfrequency electronic measuring instruments with a digital display PEL/85 BS 7202:1989 Specification for non-incendive low voltage control/interlock and low voltage earth fault monitoring circuits for use in mines MRE/3 BS :1991 Drycleanability of leather garments. Specification for drycleanability and for appropriate care labels BS :1991 Drycleanability of leather garments. Method for assessing drycleanability BS 7383:1990 Specification for cold-pour resin-based compound for use as a filling medium in terminating cables in enclosures for voltages not exceeding 11 kv for use in coal mines MRE/3 BS 7398:1991 Specification for hand hacksaw frames BS 7451:1991 Specification for archival quality bookbinding leather BS :1992 Planning, design and installation of irrigation schemes. Glossary of terms AGE/30 BS :1992 Planning, design and installation of irrigation schemes. Guide for acquisition of site data AGE/30 BS :1992 Planning, design and installation of irrigation schemes. Guide to water resources AGE/30 BS :1993 Planning, design and installation of irrigation schemes. Guide for irrigation equipment AGE/30 BS :1992 Planning, design and installation of irrigation schemes. Guide for feasibility and implementation procedures AGE/30 BS 7586:1992 Specification for combination wrenches BS 7612:1993 Specification for non-circular steel wire for mechanical springs ISE/106 BS 7771:1994 Code of practice for pasteurization of milk on farms and in small dairies AW/17 BS 7794:1995 Specification for square-drive sockets, driving squares and accessories for power-driven socket wrenches BS 7874:1998 Method of test for microbiological deterioration of elastomeric seals for joints in pipework and pipelines PRI/70 BS 7924:1999 Code of practice for the repair and overhaul of certified electrical apparatus intended for use in mines susceptible to firedamp MRE/3 BS 7953:1999 Entrance flooring systems. Selection, installation and maintenance PRI/3 BS :2000 Materials used for the control of liquid spillages. Determination of water repellency or buoyancy for hydrophobic (oil sorbent) materials CII/63 BS 7986:2005 Data quality metrics for industrial measurement and control systems. Specification AMT/7 BS 8408:2005 Road traffic signs. Testing and performance of microprismatic retroreflective sheeting materials. Specification B/509/3 BS 8439:2005 Continuous handling equipment and systems. Guide to properties of powders and bulk materials MHE/9 BS :2005 Health informatics. Medical digital imaging. Profiles format. General principles IST/35 BS :2005 Health informatics. Medical digital imaging. Profiles format. Particular requirements for metadata profiles IST/35 BS 8449:2005 Building and construction sealants with movement accommodation factors greater than 25%. Method of test for determination of adhesion/cohesion properties at variable temperatures B/547 BS 9721:1985 Sectional specification for signal transformers of assessed quality for use in electronic equipment for capability approval EPL/51 BS 9727:1985 Sectional specification for power transformers of assessed quality for use in electronic equipment for capability approval EPL/51 BS 9733:1985 Sectional specification for pulse transformers of assessed quality for use in electronic equipment for capability approval EPL/51 BS 9734:1978 Sectional specification for pulse transformers of assessed quality for use in electronic equipment: full assessment level EPL/51 BS 9741:1986 Sectional specification for inductors of assessed quality for use in electronic equipment for capability approval EPL/51 BS 9751:1979 Blank detail specification for fixed insulated (unshielded) R.F. inductors at the full assessment level EPL/51 BS 9753:1986 Sectional specification for variable R.F. type inductors of assessed quality for use in electronic equipment for capability approval EPL/51 BS ISO 13950:2007 Plastics pipes and fittings. Automatic recognition systems for electrofusion joints PRI/88/2 Update Standards Jan 2011 Prices may be subject to change. 31

32 British Standards Reviewed and Confirmed continued... BS ISO 18909:2006 Photography. Processed photographic colour films and paper prints. Methods for measuring image stability CPW/42 PD 6635:1999 Non-alloy steel rod for drawing and/or cold rolling. General purpose rod, rimmed and rimmed substitute low carbon steel rod, rod for special applications. Requirements and tests ISE/106 BS 2A 293:2005 Procurement of self-locking nuts with nonmetallic locking elements. Metric series. Specification ACE/12 BS G 257-1:1998 Design of electromagnetic hazard protection of civil aircraft. Guide to theory and threats ACE/66 BS G 257-2:1998 Design of electromagnetic hazard protection of civil aircraft. Guide to protection ACE/66 BS G 264:2005 Specification for avionic data transmission interface systems. Utilities bus ACE/6/-/9 BS 6L 16:1985 Specification for sheet and strip of 99% aluminium (temper designation H14 or H24) ACE/61/-/24 BS 6L 17:1985 Specification for sheet and strip of 99% aluminium (temper designation-o) ACE/61/-/24 BS 5L 36:1985 Specification for wire for solid, cold-forged rivets of 99.5% aluminium (not exceeding 10 mm diameter) ACE/61/-/24 BS 7L 37:1989 Specification for wire for solid cold-forged rivets of aluminium-copper-magnesium-siliconmanganese alloy (for use in the solution treated and naturally aged condition) (not exceeding 10 mm diameter) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8) (2014A) ACE/61/-/24 BS 4L 54:1986 Specification for tube of 99% aluminium (cold drawn: seamless: tested hydraulically) (not exceeding 12 mm wall thickness) ACE/61/-/24 BS 4L 56:1986 Specification for tube of aluminium-2 1 4% magnesium alloy (temper designation-o) (seamless: tested hydraulically) (not exceeding 12 mm wall thickness) ACE/61/-/24 BS 3L 63:1971 Specification for tube of aluminium-coppermangesium-silicon-manganese alloy (solution treated and precipitation treated) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8) ACE/61/-/24 BS 2L 77:1971 Specification for forging stock and forgings of aluminium-copper-magnesium-siliconmanganese alloy (solution treated and precipitation treated) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8) ACE/61/-/24 BS L 105:1971 Specification for tube of aluminium-coppermagnesium-silicon-manganese alloy (solution treated and aged at room temperature) (not exceeding 10 mm wall thickness) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8) ACE/61/-/24 BS L 114:1971 Specification for tube of aluminiummagnesium-silicon-manganese alloy (solution treated and precipitation treated) (not exceeding 10 mm wall thickness) (suitable for welding) (Mg 0.8, Si 1, Mn 0.7) ACE/61/-/24 BS L 117:1975 Specification for tube of aluminiummagnesium-silicon-copper-chromium alloy (solution treated and artificially aged: not tested hydraulically) (not exceeding 10 mm thickness) (Mg 1.0, Si 0.6, Cu 0.28, Cr 0.2) ACE/61/-/24 BS L 118:1975 Specification for tube of aluminiummagnesium-silicon-copper-chromium alloy (solution treated and artificially aged: tested hydraulically) (not exceeding 10 mm thickness) (Mg 1.0, Si 0.6, Cu 0.28, Cr 0.2) ACE/61/-/24 BS L 119:1975 Specification for ingots and castings of aluminium-copper-nickel-manganese-titaniumzirconium-cobalt-antimony alloy (solution treated and artificially aged) (Cu 5.0, Ni 1.5, Mn 0.25, Ti 0.2, Zr 0.2, Co 0.2, Sb 0.2) ACE/61/-/24 BS 2L 126:1970 Specification for ingots and castings of magnesium-cerium-zinc-zirconium alloy (precipitation treated) (rare earth metals 3.0, Zn 2.3, Zr 0.6) ACE/61/-/24 BS L 154:1977 Specification for ingots and castings of aluminium-copper-silicon alloy (solution treated and aged at room temperature) (Cu 4, Si 1) ACE/61/-/24 BS L 155:1977 Specification for ingots and castings of aluminium-copper-silicon alloy (solution treated and artificially aged) (Cu 4, Si 1) ACE/61/-/24 BS 2M 47:1990 Specification for retreading of cross ply tyres for aircraft ACE/59 BS PL 4:2005 Properties of unsaturated polyester resins for low pressure laminating of high strength fibre reinforced composites. Specification ACE/65/-/64 BS PL 5:2005 Unsaturated polyester resins for low pressure laminating of high strength fibre reinforced composites. Test methods ACE/65/-/64 BS PL 6:2005 Properties of unsaturated polyester resins for low pressure laminating of glass fibre reinforced composites. Specification ACE/65/-/64 BS PL 7:2005 Unsaturated polyester resins for low pressure laminating of glass fibre reinforced laminates. Test methods ACE/65/-/64 BS PL 8:2005 Fibrous polyamide material for use as an explosion suppressant and as a baffle material in aircraft fuel tanks. Specification ACE/65/-/64 BS PL 9:2005 Fibrous polyamide material for use as an explosion suppressant and as a baffle material in aircraft fuel tanks. Test methods ACE/65/-/64 BS AU 3:1970 Specification for clearance dimensions and fifth wheel positions for tractors and semi-trailers AUE/13 BS AU 2a:1970 Specification for dimensions of in diameter fifth wheel king pin for use with extra heavy duty semi-trailers AUE/13 BS AU 24a:1989 Specification for towing connections for trailers up to 5000 kg gross mass AUE/8 32 Prices may be subject to change. Update Standards Jan 2011

33 BS AU 25:1964 Specification for towing hook for use between trailers of 5-14 tons gross weight and towing vehicle AUE/13 BS AU 26:1964 Specification for towing jaw for use between trailers of 5-16 tons gross weight and towing vehicle AUE/13 BS AU 27:1964 Specification for towing hook for use between trailers of 5-35 tons gross weight and towing vehicle AUE/13 BS AU 28:1964 Specification for towing jaw for use between trailers of 5-35 tons gross weight and towing vehicle AUE/13 BS AU 29:1964 Specification for drawbar eyes and forecarriage pins for connection between trailers of 5-35 tons gross weight and towing vehicle AUE/13 BS AU 30b:1970 Specification for standard automatic roller-type coupling for semi-trailers of 7 tons to tons laden weight AUE/13 BS AU 114b:1979 Specification for strength requirements of towing brackets and coupling balls for caravans and light trailers AUE/8 BS AU 146b:1970 Specification for standard automatic roller-type coupling for semi-trailers not exceeding tons laden weight AUE/13 BS AU 181:1982 Specification for interface dimensions for demountable vehicle body systems AUE/13 BS AU 187:2000 Tow rope assemblies for towing passenger cars and light vans AUE/9 BS AU 190:1983 Specification for interface dimensions and fixing bolts for the mounting of overrun devices on delta shaped drawbars of trailers up to 2000 kg AUE/8 BS AU 200-2a:1984 Spray reducing devices for heavy goods vehicles. Specification for performance of suppression material and devices, and air/water separating material and devices AUE/13 BS AU 200-1a:1984 Spray reducing devices for heavy goods vehicles. Specification for design of containment devices AUE/13 BS AU 210-2:1994 Drawbars for caravans and light trailers. Specification for the design of aluminium drawbars and chassis AUE/8 BS AU 217-2:1989 Maximum road speed limiters for motor vehicles. Specification for system and component requirements AUE/13 BS AU 217-1a:1987 Maximum road speed limiters for motor vehicles. Specification for installed requirements AUE/13 BS AU 267:1998 Code of practice for breakaway cables and secondary couplings AUE/8 BRITISH STANDARDS DECLARED OBSOLESCENT Declaration of obsolescence indicates that the standard is not recommended for use in new equipment but needs to be retained for the servicing of existing equipment that is expected to have a long working life. BS 3348:1961 Specification for antral trocars and cannulae CH/170 BS :1982 Testing coated fabrics. Methods 7A, 7B and 7C. Methods for determination of tear strength This standard has been declared obsolescent as sections of the above mentioned standards are still used by the MoD. It is partially replaced by BS EN ISO :2003 BS :1983 Testing coated fabrics. Methods 10A, 10B and 10C. Methods for determination of low temperature performance This standard has been declared obsolescent as sections of the above mentioned standards are still used by the MoD. It is partially replaced by BS EN :1998 and BS EN :1998 BS 3441:1995 Specification for tanks for the transport of milk and liquid milk products AW/22 BS 3504:1962 Specification for magnesium-activated nickel for cathodes of electronic tubes and valves EPL/39 BS :1966 Methods for the analysis of nickel for use in electronic tubes and valves. Determination of aluminium (photometric method) EPL/39 BS :1968 Methods for the analysis of nickel for use in electronic tubes and valves. Determination of boron (photometric method) EPL/39 BS :1966 Methods for the analysis of nickel for use in electronic tubes and valves. Determination of carbon EPL/39 BS :1964 Methods for the analysis of nickel for use in electronic tubes and valves. Determination of chromium (photometric method) EPL/39 BS :1964 Methods for the analysis of nickel for use in electronic tubes and valves. Determination of cobalt (photometric method) EPL/39 BS :1964 Methods for the analysis of nickel for use in electronic tubes and valves. Determination of copper (photometric method) EPL/39 BS :1964 Methods for the analysis of nickel for use in electronic tubes and valves. Determination of iron (photometric method) EPL/39 Update Standards Jan 2011 Prices may be subject to change. 33

34 British Standards Declared Obsolesent continued... BS :1964 Methods for the analysis of nickel for use in electronic tubes and valves. Determination of manganese (photometric method) EPL/39 BS :1967 Methods for the analysis of nickel for use in electronic tubes and valves. Determination of magnesium (photometric method) EPL/39 BS :1964 Methods for the analysis of nickel for use in electronic tubes and valves. Determination of silicon per cent (photometric method) EPL/39 BS :1965 Methods for the analysis of nickel for use in electronic tubes and valves. Determination of silicon per cent (photometric method) EPL/39 BS :1970 Methods for the analysis of nickel for use in electronic tubes and valves. Determination of sulphur (combustion method) EPL/39 BS :1965 Methods for the analysis of nickel for use in electronic tubes and valves. Determination of titanium (photometric method) EPL/39 BS :1964 Methods for the analysis of nickel for use in electronic tubes and valves. Determination of tungsten (gravimetric method) EPL/39 BS :1968 Methods for the analysis of nickel for use in electronic tubes and valves. Determination of zinc (photometric method) EPL/39 BS :1966 Methods for the analysis of nickel for use in electronic tubes and valves. Determination of combined and free magnesium EPL/39 BS :1966 Methods for the analysis of nickel for use in electronic tubes and valves. Spectrographic method EPL/39 BS :1966 Methods for the analysis of nickel for use in electronic tubes and valves. Determination of magnesium (atomic absorption method) EPL/39 BS 3839:1978 Specification for oxygen-free high-conductivity copper for electronic tubes and semiconductor devices EPL/39 BS :1988 Methods of test for rigid cellular materials. Methods 1 to 5 PRI/24 BS 5336:1976 Specification. Cores made of ferromagnetic oxides for use in high flux density transformers EPL/51 BS 5576:1998 Specification for fire safety features of camping tents, awnings, trailer tents and caravan awnings TCI/74 This standard has been declared obsolescent as areas of these standards have been replaced by BS EN ISO 5912:2005 and BS ISO 10966:2005. However, certain elements may well still be used by the military and NGO s therefore it is felt complete removal would make reference to these sections difficult for tender purposes BS 6341:1983 Specification for fabrics for camping tents TCI/74 This standard has been declared obsolescent as areas of these Standards have been replaced by BS EN ISO 5912:2005 and BS ISO 10966:2005. However, certain elements may well still be used by the military and NGO s therefore it is felt complete removal would make reference to these sections difficult for tender purposes BS 6608:1985 Specification for cattle hide leathers for upholstered furniture This standard has been re-declared obsolescent for a BS 6943:1988 Classification of shapes of electronic components for placement on printed wiring boards EPL/40X This standard has been declared obsolescent as it is no longer used in the electronics industry. It is intended that it be withdrawn at the next 5-year review BS :1989 Artificial sports surfaces. Methods of test. Methods for determination of ball/surface interaction PRI/57 This standard has been declared obsolescent as this standard covers 5 methods of test (Rebound, Roll, Velocity Change, Spin and Stiffness). Of these, EN equivalents only exist for Rebound (EN 12235) and Roll (12234). The remaining tests for spin and Velocity Change remain in use and contract specifications and warranties remain which call up these procedures. There is also current interest in Test methods for ball/surface friction, notably for hockey and this standard could provide a vehicle to the development of such test methods. It is partially replaced by BS EN 12234:2002 BS :1990 Artificial sports surfaces. Methods of test. Methods for determination of person/surface interaction PRI/57 This standard has been declared obsolescent as this standard covers 4 test methods (Traction, Sliding Distance, Slip Resistance and Peak G) Of these only 3 are currently covered by EN equivalents. There is no direct equivalent for Sliding Distance. This method features in many current contracts and warranties and still has potential use. It is partially replaced by BS EN 14808:2005, BS EN 14837:2006 and BS EN :2007 BS :1990 Artificial sports surfaces. Methods of test. Methods for determination of durability PRI/57 This standard has been declared obsolescent as this standard covers 6 test methods (Abrasion wheel, Abrasion blades, Fatigue, Low Temp impact, Spikes, Indentation). Currently there are EN or ISO equivalents for Abrasion, Spikes and Indentation. The existing EN methods have attracted criticism and are due for review. It would be premature to withdraw this standard. It is partially replaced by BS EN 14810:2006 To order visit 34 Prices may be subject to change. Update Standards Jan 2011

35 BS :1991 Artificial sports surfaces. Methods of test. Miscellaneous PRI/57 This standard has been declared obsolescent as it covers 4 test methods (Colour transfer, Seam Strength tension, Seam strength peel and Infilttration). EN equivalents exist for 3 of these methods, but not for Colour Transfer. This test remains in use and the standard should not be withdrawn until an EN equivalent is published. It is partially replaced by BS EN 12228:2002 and BS EN 12616:2003 BS 9030:1971 Specification for magnetrons of assessed quality: generic data and methods of test EPL/39 BS 9031:1971 Rules for the preparation of detail specifications for pulsed fixed-frequency magnetrons of assessed quality EPL/39 BS 9032:1975 Rules for the preparation of detail specifications for pulsed magnetrons (excluding frequencyagile magnetrons) of assessed quality. Basic assessment level EPL/39 BS 9040:1978 Specification for gas-filled microwave switching tubes of assessed quality: generic data and methods of test EPL/39 BS 9041:1978 Rules for the preparation of detail specifications for gas filled microwave switching tubes of assessed quality: tunable and broadband TR tubes and TR limiters. Full assessment level EPL/39 BS 9050:1971 Specification for cathode ray tubes of assessed quality: generic data and methods of test EPL/39 BS 9054:1971 Rules for the preparation of detail specifications for radar display cathode ray tubes of assessed quality EPL/39 BS 9612 N004:1977 Detail specification for cold welded seal quartz crystal units for oscillator applications. DN, 47 U/2, DQ and DP enclosures, 0.8 to 20 MHz and 3.0 to 30 MHz frequency ranges. Fundamental thickness-shear mode, AT-cut, for operation over wide temperature ranges (nontemperature controlled). Full assessment level EPL/49 BS 9612 N005:1977 Detail specification for cold welded seal quartz crystal units for oscillator applications. DN, DQ and DP enclosures, 0.8 to 20 MHz and 3.0 to 30 MHz frequency ranges. Fundamental thicknessshear mode, AT-cut, for operation over narrow temperature ranges (temperature controlled). Full assessment level EPL/49 BS 9612 N006:1977 Detail specification for cold welded seal quartz crystal units for oscillator applications. DN, 47 U/2, DQ and DP enclosures, 17 to 75 MHz frequency range. Third overtone thickness-shear mode, AT-cut, for operation over wide temperature ranges (non-temperature controlled). Full assessment level EPL/49 BS 9612 N008:1977 Detail specification for cold welded seal quartz crystal units for oscillator applications. DN, DQ and DP enclosures, 50 to 125 MHz frequency range. Fifth overtone thickness-shear mode, ATcut, for operation over wide temperature ranges (non-temperature controlled). Full assessment level EPL/49 BS 9612 N009:1977 Detail specification for cold welded seal quartz crystal units for oscillator applications. DN, DQ and DP enclosures, 50 to 125 MHz frequency range. Fifth overtone thickness-shear mode, ATcut, for operation over narrow temperature ranges (temperature controlled). Full assessment level EPL/49 BS 9612 N010:1979 Detail specification for cold welded seal quartz crystal units for oscillator applications. DK enclosure, 6.0 to 25 MHz frequency range. Fundamental thickness-shear mode, AT-cut, for operation over wide temperature ranges (nontemperature controlled). Full assessment level EPL/49 BS 9612 N016:1979 Detail specification for resistance welded seal quartz crystal units for oscillator applications. DN, DZ, DQ and DP enclosures, 0.8 to 20 MHz and 3.0 to 30 MHz frequency ranges. Fundamental thickness-shear mode, AT-cut, for operation over wide temperature ranges (nontemperature controlled). Full assessment level EPL/49 BS 9612 N017:1979 Detail specification for resistance welded seal quartz crystal units for oscillator applications. DN, DZ, DQ and DP enclosures, 0.8 to 20 MHz and 3.0 to 30 MHz frequency ranges. Fundamental thickness-shear mode, AT-cut, for operation over narrow temperature ranges (temperature controlled). Full assessment level EPL/49 BS 9612 N018:1979 Detail specification for resistance welded seal quartz crystal units for oscillator applications. DN, DZ, DQ and DP enclosures, 17 to 75 MHz frequency range. Third overtone thickness-shear mode, AT-cut, for operation over wide temperature ranges (non-temperature controlled). Full assessment level EPL/49 BS 9612 N019:1979 Detail specification for resistance welded seal quartz crystal units for oscillator applications. DN, DZ, DQ and DP enclosures, 17 to 75 MHz frequency range. Third overtone thickness-shear mode, AT-cut, for operation over narrow temperature ranges (temperature controlled). Full assessment level EPL/49 BS 9612 N020:1979 Detail specification for resistance welded seal quartz crystal units for oscillator applications. DN, DZ, DQ and DP enclosures, 50 to 125 MHz frequency range. Fifth overtone thickness-shear mode, AT-cut, for operation over wide temperature ranges (non-temperature controlled). Full assessment level EPL/49 BS 9617:1982 Rules for the preparation of detail specifications for quartz crystal units of assessed quality. Full assessment level EPL/49 Update Standards Jan 2011 Prices may be subject to change. 35

36 British Standards Declared Obsolesent continued... BS 9625:1983 Blank detail specification for quartz crystal oscillators of assessed quality: full assessment level EPL/49 BS 9720:1989 Specification for custom-built transformers and inductors of assessed quality: generic data and methods of test EPL/51 BS AU 141a:1971 Specification for the performance of diesel engines for road vehicles MCE/22 BRITISH STANDARDS WITHDRAWN If any standard in this list has been amended since publication, all amendments published to date are also withdrawn BS :Group 01:1983 Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms common to power, telecommunications and electronics. Fundamental terminology GEL/1 Superseded by BS IEC 60050(111):1996, BS IEC 60050(121):1998 and BS IEC :1998 BS 4997:1991 Specification for wooden axilla crutches CH/173 Superseded by BS EN 1985:1999 PD :1999 Vehicle restraint systems. Fundamentals. Database B/509/1 This standard has been declared obsolescent as it is no longer relevant PD :1999 Vehicle restraint systems. Fundamentals of highway restraint systems B/509/1 This standard has been declared obsolescent as it is no longer relevant PD :1999 Vehicle restraint systems. Development of vehicle highway barriers in the United Kingdom B/509/1 This standard has been declared obsolescent as it is no longer relevant PD :1999 Vehicle restraint systems. Development of bridge parapets in the United Kingdom B/509/1 This standard has been declared obsolescent as it is no longer relevant PD :1999 Vehicle restraint systems. Development of barrier transitions and terminals B/509/1 This standard has been declared obsolescent as it is no longer relevant PD :1999 Vehicle restraint systems. Crashworthy roadside features. Impact attenuators B/509/1 This standard has been declared obsolescent as it is no longer relevant BS SP 55 and SP 56:1953 Specifications for double coil spring washers for aircraft ACE/12 BS 691:1987 Specification for sub-normal range ovulation and dual-scale clinical maximum thermometers (mercury-in-glass, solid stem) LBI/36/3 Superseded by BS EN :2000+A1:2009 BS 1309:1974 Methods of sampling and chemical testing of leather Superseded by BS EN 12748:1999, BS EN ISO 2418:2002, BS EN ISO 4044:1998, BS EN ISO 4045:1998, BS EN ISO 4047:1998, BS EN ISO 4048:1998 and BS EN ISO 5399:1998 BS :2002 Cylindrical helical springs made from round wire and bar. Guide to methods of specifying, tolerances and testing. Compression springs FME/9/3 Superseded by BS :2010 and BS EN 15800:2008 BS :1996 (ISO 3987:1994) Methods of test for petroleum and its products. Petroleum products. Lubricating oils and additives. Determination of sulfated ash PTI/13 Superseded by the dual numbered standard BS ISO 3987:2010, BS :2010 BS 3144:1968 Methods of sampling and physical testing of leather Superseded by BS EN ISO 14268:2002, BS EN ISO 2417:2002, BS EN ISO 2418:2002, BS EN ISO 2419:2002, BS EN ISO 2420:2002, BS EN ISO 2589:2002, BS EN ISO 3376:2002, BS EN ISO :2002, BS EN ISO 3380:2002, BS EN ISO 5402:2002, BS EN ISO 5403:2002 and BS EN ISO 5404:2002 BS :1989 Methods of test for flexible cellular materials. Method 10. Determination of solvent swelling PRI/24 Superseded by BS EN ISO 2440:1999+A1:2010 BS 5181:1975 Specification for wooden walking sticks CH/173 Superseded by BS EN 1985:1999 BS 5205:1990 Specification for adjustable metal walking sticks CH/173 Superseded by BS EN 1985:1999 BS 5293:1976 Methods for sampling and testing carbon black for use in the rubber industry PRI/50 Superseded by BS 5293:Part 17:1988, BS 5293:Part 2:1990, BS 5293:Part 3:1990, BS 5293:Part 5:1988, BS 5293:Part 6:1988, BS :1988, BS :1991, BS :1991, BS :1990 and BS :1991 BS :1998 Highway parapets for bridges and other structures. Specification for vehicle containment parapets of metal construction B/509/1 Superseded by BS EN :1998 BS :1991 Highway parapets for bridges and other structures. Specification for vehicle containment parapets of concrete construction B/509 Superseded by BS EN :1998 BS :1994 Highway parapets for bridges and other structures. Specification for vehicle containment parapets of combined metal and concrete construction B/509 Superseded by BS EN :1998 BS 6985:1989 Specification for dual-scale and ovulation clinical maximum thermometers (mercury-inglass, enclosed scale) LBI/36/3 Superseded by BS EN :2000+A1: Prices may be subject to change. Update Standards Jan 2011

37 BS :1988 (ISO :1987) Components and systems of reciprocating internal combustion engines. Glossary of terms for valves, camshaft drive and actuating mechanisms MCE/14 Superseded by BS ISO :2010 BS :1989 Artificial sports surfaces. Methods of test. Methods for determination of environmental resistance PRI/57 Superseded by BS EN 14836:2005 BS 7281:1990 Specification for polyethylene pipes for the supply of gaseous fuels PRI/88 Superseded by BS EN :2010, BS EN :2010 and BS EN :2010 BS 7336:1990 Specification for polyethylene fusion fittings with integral heating element(s) for use with polyethylene pipes for the conveyance of gaseous fuels PRI/88 Superseded by BS EN :2010 BS 9150:1983 Specification for electrical relays of assessed quality: generic data and methods of test EPL/94 Superseded by BS EN :1996 and BS EN :1996 BS 9151:1972 Rules for the preparation of detail specifications for all-or-nothing electromechanical relays of assessed quality. Full and basic assessment levels EPL/94 Superseded by BS EN /116206/116207:1996 BS EN 792-4:2000+A1:2008 Hand-held non-electric power tools. Safety requirements. Non-rotary percussive power tools MCE/8/-/2 Superseded by BS EN ISO :2010 Withdrawn publications If you have questions about withdrawn titles contact the BSI Knowledge Centre +44 (0) DD CEN/TS :2007 Stationary source emissions. Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs. Sampling and analysis of dioxin-like PCBs EH/2/1 Superseded by BS EN :2010 BS EN :1990 Charpy impact test on metallic materials. Test method (V- and U-notches) ISE/NFE/4/4 Superseded by BS EN ISO 148-1:2010 BS EN :2001 Aluminium and aluminium alloys. Anodizing. Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments STI/32 Superseded by BS EN ISO 6719:2010 BS EN 12465:2001 Wood poles for overhead lines. Durability requirements B/518 Superseded by BS EN 14229:2010 BS EN 12479:2002 Wood poles for overhead lines. Sizes. Methods of measurement and permissible deviations B/518 Superseded by BS EN 14229:2010 BS EN 12509:2001 Timber poles for overhead lines. Test methods. Determination of modulus of elasticity, bending strength, density and moisture content B/518 Superseded by BS EN 14229:2010 BS EN 12510:2002 Wood poles for overhead lines. Strength grading criteria B/518 Superseded by BS EN 14229:2010 BS EN 12511:2002 Wood poles for overhead lines. Determination of characteristic values B/518 Superseded by BS EN 14229:2010 BS EN ISO 13407:1999 Human-centred design processes for interactive systems PH/9 Superseded by BS EN ISO :2010 DD CEN/TS 14588:2004 Solid biofuels. Terminology, definitions and descriptions PTI/17 Superseded by BS EN 14588:2010 DD CEN/TS :2006 Solid biofuels. Methods for the determination of particle size distribution. Oscillating screen method using sieve apertures of 3, 15 mm and above PTI/17 Superseded by BS EN :2010 DD CEN/TS :2006 Solid biofuels. Methods for the determination of particle size distribution. Vibrating screen method using sieve apertures of 3,15 mm and below PTI/17 Superseded by BS EN :2010 BS EN 28394:1991 (ISO 8394:1988) Building construction. Jointing products. Determination of extrudability of onecomponent sealants B/547 Superseded by BS EN ISO :2010 and BS EN ISO :2010 BS EN :2001 (IEC :2000) Lamp controlgear. General and safety requirements CPL/34/3 Superseded by BS EN :2008 BS ISO 362:1998 Acoustics. Measurement of noise emitted by accelerating road vehicles. Engineering method EH/1/2 Superseded by BS ISO 362-1:2007 and BS ISO 362-2:2009 DD ISO/PAS 12868:2009 Geometrical product specification (GPS). Coordinate measuring machines (CMM). Testing the performance of CMMs using single-stylus contacting probing systems TDW/4 Superseded by BS EN ISO :2010 DD ISO/TS 21748:2004 Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty estimation SS/6 Superseded by BS ISO 21748:2010 BS 4A 4-1.2:1967 Specification for test pieces and test methods for metallic materials. Tensile tests. Tensile tests elevated temperature. Metric units ACE/61 Superseded by BS EN :2005 BS L 109:1971 Specification for aluminium-coated sheet and strip of aluminium-copper-magnesiummanganese alloy (solution treated and aged at room temperature) (Cu 4.4, Mg 1.5, Mn 0.6) ACE/61/-/24 Superseded by BS EN 2090:2005 Update Standards Jan 2011 Prices may be subject to change. 37

38 British Standards Withdrawn continued... BS L 113:1971 Specification for sheet and strip of aluminiummagnesium-silicon-manganese alloy (solution treated and precipitation treated) (suitable for welding) (Mg 0.8, Si 1, Mn 0.7) ACE/61/-/24 Superseded by BS EN 4007:2005 BS L 115:1971 Specification for plate of aluminiummagnesium-silicon-manganese alloy (solution treated, controlled stretched and precipitation treated) (not exceeding 25 mm thickness) (suitable for welding) (Mg 0.8, Si 1, Mn 0.7) ACE/61/-/24 Superseded by BS EN 4202:2005 PAS 78:2006 Guide to good practice in commissioning accessible websites BS 8878:2010 is based on PAS 78:2006. Although it is not superseded by this publication it is now withdrawn BRITISH STANDARDS UNDER REVIEW The following British Standards implement International and/or European Standards which are currently under review to see if they should be confirmed, revised or withdrawn. Comments are welcome and should be sent to Debbie Stead, Head of Committee Service Centre Operations, BSI Head Office, 389 Chiswick High Road, London W4 4AL or via to BSUKoperations.review@bsigroup.com by 28 February, 2011, in order to be considered by the relevant UK Committee. BS :1993 (ISO 9705:1993) Fire tests on building materials and structures. Full-scale room test for surface products FSH/21 BS :1995 (ISO 10478:1994) Methods of test for petroleum and its products. Petroleum products. Determination of aluminium and silicon in fuel oils. Inductively coupled plasma emission and atomic absorption spectroscopy methods PTI/13 BS :1997 (ISO 3648:1994) Methods of test for petroleum and its products. Aviation fuels. Estimation of net specific energy PTI/13 BS :1996 (ISO 6614:1994) Methods of test for petroleum and its products. Petroleum products. Determination of water separability of petroleum oils and synthetic fluids PTI/13 BS :1996 (ISO 8691:1994) Methods of test for petroleum and its products. Petroleum products. Low levels of vanadium in liquid fuels. Determination by flameless atomic absorption spectrometry after ashing PTI/13 BS A:1995 (ISO :1994) Measurement of liquid flow in open channels. Dilution methods. General CPI/113 BS C:1993 (ISO :1992) Measurement of liquid flow in open channels. Dilution methods. Methods of measurement using chemical tracers CPI/113 BS D:1993 (ISO :1992) Measurement of liquid flow in open channels. Dilution methods. Methods of measurement using fluorescent tracers CPI/113 BS 3900-J13:2001 (ISO :2001) Methods of test for paints. Testing of coating powders. Particle size analysis by laser diffraction STI/10 BS :1994 (ISO 9768:1994) Methods of test for tea. Determination of water extract AW/8 BS :1999 (ISO 15598:1999) Methods of test for tea. Determination of crude fibre content AW/8 BS :1986 (EN :1991, ISO :1985) Explosion protection systems. Method for determination of explosion indices of combustible dusts in air FSH/23 BS :1986 (EN :1991, ISO :1985) Explosion protection systems. Method for determination of explosion indices of combustible gases in air FSH/23 BS :1986 (EN :1991, ISO :1985) Explosion protection systems. Method for determination of explosion indices of fuel/air mixtures other than dust/air and gas/air mixtures FSH/23 BS :1986 (EN :1991, ISO :1985) Explosion protection systems. Method for determination of efficacy of explosion suppression systems FSH/23 BS :1988 (ISO :1986) Classification of petroleum fuels. Gas turbine fuels for industrial and marine applications PTI/2 BS :1988 (ISO 7516:1984) Analysis of instant tea. Methods of sampling AW/8 BS 7774:1994 (ISO 3800:1993) Threaded fasteners. Axial load fatigue testing. Test methods and evaluation of results FME/9/3 BS :1995 (ISO :1994) Tea sacks. Specification for a reference sack for palletized and containerized transport of tea AW/8 BS :1999 (ISO :1999) Tea sacks. Performance specification for sacks for palletized and containerized transport of tea AW/8 BS EN ISO 228-1:2003 Pipe threads where pressure-tight joints are not made on the threads. Dimensions, tolerances and designation ISE/110 BS EN ISO 748:2007 Hydrometry. Measurement of liquid flow in open channels using current-meters or floats CPI/113/1 38 Prices may be subject to change. Update Standards Jan 2011

39 BS EN ISO 1564:1999 Dental aqueous impression materials based on agar CH/106/2 BS EN ISO 2592:2001 (BS :2002) Determination of flash and fire points. Cleveland open cup method PTI/13 BS EN ISO 2815:2003 (BS 3900-E9:2003) Paints and varnishes. Buchholz indentation test STI/10 BS EN ISO :2006 (BS 3900-A7-2:2003) Paints and varnishes. Determination of viscosity using rotary viscometers. Disc or ball viscometer operated at a specified speed STI/10 BS EN ISO :2000 Technical product documentation. Lettering. Latin alphabet, numerals and marks TDW/4 BS EN ISO :2000 Technical product documentation. Lettering. Greek alphabet TDW/4 BS EN ISO :2000 Technical product documentation. Lettering. Diacritical and particular marks for the Latin alphabet TDW/4 BS EN ISO :2000 Technical product documentation. Lettering. Cyrillic alphabet TDW/4 BS EN ISO :2003 (BS 3900-H1:2003) Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance. General introduction and designation system STI/10 British Standards Online at BS EN ISO :2003 (BS 3900-H2:2003) Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance. Assessment of degree of blistering STI/10 BS EN ISO :2003 (BS 3900-H3:2003) Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance. Assessment of degree of rusting STI/10 BS EN ISO :2003 (BS 3900-H4:2003) Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance. Assessment of degree of cracking STI/10 BS EN ISO :2003 (BS 3900-H5:2003) Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance. Assessment of degree of flaking STI/10 BS EN ISO :2003 (BS 3900-H7:2003) Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance. Assessment of degree of chalking by velvet method STI/10 BS EN ISO :2003 (BS 3900-H10:2003) Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance. Assessment of degree of filiform corrosion STI/10 BS EN ISO :2001 Tolerances for fasteners. Bolts, screws, studs and nuts. Product grades A, B and C FME/9/2 BS EN ISO 4823:2000+A1:2007 Dentistry. Elastomeric impression materials CH/106/2 BS EN ISO 5261:1999 Technical drawings. Simplified representation of bars and profile sections TDW/4 BS EN ISO :2001 Mechanical vibration. Measurement and evaluation of human exposure to handtransmitted vibration. General requirements GME/21/6 BS EN ISO :2002 Mechanical vibration. Measurement and assessment of human exposure to handtransmitted vibration. Practical guidance for measurement at the workplace GME/21/6 BS EN ISO :2004 Fasteners. Surface discontinuities. Nuts FME/9/1 BS EN ISO :2001 Inflatable boats. Boats with maximum motor power rating of 15 kw and greater GME/33 BS EN ISO :2007 Dentistry. Number coding system for rotary instruments. Specific characteristics of rootcanal instruments CH/106/4 BS EN ISO 6428:1999 Technical drawings. Requirements for microcopying TDW/4 BS EN ISO 6847:2001 Welding consumables. Deposition of a weld metal pad for chemical analysis WEE/39 BS EN ISO 6946:2007 Building components and building elements. Thermal resistance and thermal transmittance. Calculation method B/540 BS EN ISO 7491:2000 Dental materials. Determination of colour stability CH/106/2 BS EN ISO 8249:2000 Welding. Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals WEE/39 BS EN ISO 8311:1996 Refrigerated light hydrocarbon fluids. Calibration of membrane tanks and independent prismatic tanks in ships. Physical measurement PTI/12 BS EN ISO :2004 (BS 7079-B8:2004) Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness. Field method for the refractometric determination of moisture STI/21 Update Standards Jan 2011 Prices may be subject to change. 39

40 British Standards Under Review continued... BS EN ISO :2004 (BS 7079-B12:2004) Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness. Field method for the titrimetric determination of water-soluble ferrous ions STI/21 BS EN ISO :2004 (BS 7079-C5:2004) Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blastcleaned steel substrates. Replica tape method for the determination of the surface profile STI/21 BS EN ISO 8589:2010 Sensory analysis. General guidance for the design of test rooms AW/12 BS EN ISO :2008 Textiles. Test methods for nonwovens. Determination of resistance to penetration by water (hydrostatic pressure) TCI/24 BS EN ISO :1998 Small craft. Seacocks and through-hull fittings. Metallic GME/33 BS EN ISO 9097:1995 Small craft. Electric fans GME/33 BS EN ISO :1999 Approval testing of welders. Fusion welding. Copper and copper alloys WEE/36 BS EN ISO :1999 Approval testing of welders. Fusion welding. Nickel and nickel alloys WEE/36 BS EN ISO :2000 Approval testing of welders. Fusion welding. Titanium and titanium alloys, zirconium and zirconium alloys WEE/36 BS EN ISO 9875:2002 Ships and marine technology. Marine echosounding equipment EPL/80 BS EN ISO :2007 Dentistry. Water-based cements. Powder/liquid acid-base cements CH/106/1 BS EN ISO 10211:2007 Thermal bridges in building construction. Heat flows and surface temperatures. Detailed calculations B/540 BS EN ISO 10239:2008 Small craft. Liquefied petroleum gas (LPG) systems GME/33 BS EN ISO 10456:2007 Building materials and products. Hygrothermal properties. Tabulated design values and procedures for determining declared and design thermal values B/540 BS EN ISO 10683:2000 Fasteners. Non-electrolytically applied zinc flake coatings FME/9/3 BS EN ISO 11079:2007 Ergonomics of the thermal environment. Determination and interpretation of cold stress when using required clothing insulation (IREQ) and local cooling effects PH/9/1 BS EN ISO :2008 Water quality. Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test). Method using freshly prepared bacteria EH/3/5 BS EN ISO :2008 Water quality. Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test). Method using liquid-dried bacteria EH/3/5 BS EN ISO :2008 Water quality. Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test). Method using freeze-dried bacteria EH/3/5 BS EN ISO 11592:2001 Small craft less than 8 m length of hull. Determination of maximum propulsion power rating GME/33 BS EN ISO 11606:2001 Ships and marine technology. Marine electromagnetic compasses EPL/80 BS EN ISO :2007 Clothing for protection against heat and flame. Determination of contact heat transmission through protective clothing or constituent materials. Test method using contact heat produced by dropping small cylinders PH/3/2 BS EN ISO :2008 Small craft. Hull construction and scantlings. Design pressures for monohulls, design stresses, scantlings determination GME/33 BS EN ISO :2008 Small craft. Hull construction and scantlings. Structural arrangements and details GME/33 BS EN ISO 13370:2007 Thermal performance of buildings. Heat transfer via the ground. Calculation methods B/540 BS EN ISO 13769:2009 Gas cylinders. Stamp marking PVE/3/7 BS EN ISO 13786:2007 Thermal performance of building components. Dynamic thermal characteristics. Calculation methods B/540 BS EN ISO 13789:2007 Thermal performance of buildings. Transmission and ventilation heat transfer coefficients. Calculation method B/540 BS EN ISO :2008 Small craft. Airborne sound emitted by powered recreational craft. Pass-by measurement procedures GME/33 BS EN ISO 14683:2007 Thermal bridges in building construction. Linear thermal transmittance. Simplified methods and default values B/540 BS EN ISO 14801:2007 Dentistry. Implants. Dynamic fatigue test for endosseous dental implants CH/106/8 BS EN ISO 14946:2001 Small craft. Maximum load capacity GME/33 BS EN ISO 15088:2008 Water quality. Determination of the acute toxicity of waste water to zebrafish eggs (Danio rerio) EH/3/5 BS EN ISO :2008 (BS 3900-K4:2008) Paints and varnishes. Determination of release rate of biocides from antifouling paints. Determination of pyridine-triphenylborane (PTPB) concentration in the extract and calculation of the release rate STI/10 40 Prices may be subject to change. Update Standards Jan 2011

41 BS EN ISO :2008 (BS 3900-K5:2008) Paints and varnishes. Determination of release rate of biocides from antifouling paints. Calculation of the tolylfluanid and dichlofluanid release rate by determination of the concentration of dimethyltolylsulfamide (DMST) and dimethylphenylsulfamide (DMS STI/10 BS EN ISO :2006 Petroleum and natural gas industries. Life cycle costing. Methodology PSE/17 BS EN ISO :2001 Indoor, ambient and workplace air. Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography. Pumped sampling EH/2/3 BS EN ISO 16862:2006 Paints and varnishes. Evaluation of sag resistance STI/10 BS EN ISO :2007 Petroleum and natural gas industries. Drilling and production equipment. Flow-control devices for side-pocket mandrels PSE/17/-/4 BS EN ISO 17511:2003 In vitro diagnostic medical devices. Measurement of quantities in biological samples. Metrological traceability of values assigned to calibrators and control materials CH/212 BS EN ISO 19902:2007 Petroleum and natural gas industries. Fixed steel offshore structures B/525/12 BS EN ISO :2003 Paints and varnishes. Evaluation of defects on coated surfaces using optical imaging. General guidance STI/10 BS EN ISO :2008 Paints and varnishes. Evaluation of defects on coated surfaces using optical imaging. Evaluation of filiform corrosion STI/10 BS EN 22401:1994 (ISO 2401:1972) Covered electrodes. Determination of the efficiency, metal recovery and deposition coefficient WEE/39 BS EN ISO :2007 Medical devices utilizing animal tissues and their derivatives. Application of risk management CH/194/1 BS EN ISO :2007 Medical devices utilizing animal tissues and their derivatives. Controls on sourcing, collection and handling CH/194/1 BS EN ISO :2007 Medical devices utilizing animal tissues and their derivatives. Validation of the elimination and/or inactivation of viruses and transmissible spongiform encephalopathy (TSE) agents CH/194/1 BS EN :1992 (ISO :1988) Fasteners. Surface discontinuities. Bolts, screws and studs for general requirements FME/9/2 BS EN :1992 (ISO :1988) Fasteners. Surface discontinuities. Bolts, screws and studs for special requirements FME/9/2 BS ISO 702-2:2007 Machine tools. Connecting dimensions of spindle noses and work holding chucks. Camlock type MTE/1 BS ISO 702-3:2007 Machine tools. Connecting dimensions of spindle noses and work holding chucks. Bayonet type MTE/1 BS ISO 885:2000 General purpose bolts and screws. Metric series. Radii under the head FME/9/2 BS ISO :2000 Petroleum industry. Terminology. Measurement PTI/13 BS ISO :2000 Petroleum industry. Terminology. General and index PTI/13 BS ISO :2007 Mechanical vibration and shock. Resilient mounting systems. Technical information to be exchanged for the application of vibration isolation associated with railway systems GME/21 BS ISO :2007 Machine tools. Test conditions for testing the accuracy of boring and milling machines with horizontal spindle. Machines with fixed column and movable table MTE/1 BS ISO :2007 Machine tools. Test conditions for testing the accuracy of boring and milling machines with horizontal spindle. Machines with movable column and fixed table MTE/1 BS ISO :2007 Machine tools. Test conditions for testing the accuracy of boring and milling machines with horizontal spindle. Machines with movable column and movable table MTE/1 BS ISO :2007 Codes for the representation of names of countries and their subdivisions. Country subdivision code IDT/2/11 BS ISO :2000 Test conditions for high accuracy turret and single spindle coordinate drilling and boring machines with table of fixed height with vertical spindle. Testing of the accuracy. Single column type machines MTE/1 BS ISO :2000 Test conditions for high accuracy turret and single spindle coordinate drilling and boring machines with table of fixed height with vertical spindle. Testing of the accuracy. Portal type machines with moving table MTE/1 BS ISO 3764:2000 Timekeeping instruments. Movements. Forms, dimensions and nomenclature STI/53 BS ISO 4226:2007 Air quality. General aspects. Units of measurement EH/2/4 BS ISO :2007 Pulps. Estimation of dirt and shives. Visual inspection by reflected light using equivalent black area (EBA) method PAI/11 BS ISO 6296:2000 (BS :2001) Methods of test for petroleum and its products. Petroleum product. Determination of water. Potentiometric Karl Fischer titration method PTI/13 BS ISO :2000 Wheelchairs. Set-up procedures CH/173/1 BS ISO :2007 Machine tools. Test conditions for bridge-type milling machines. Testing of the accuracy. Travelling bridge (gantry-type) machines MTE/1 Update Standards Jan 2011 Prices may be subject to change. 41

42 British Standards Under Review continued... BS ISO :2008 Road vehicles. Fuse-links. Definitions and general test requirements AUE/16 BS ISO 9043:2008 Mopeds. Measurement method for moments of inertia AUE/14 BS ISO :2001 Mechanical vibration. Laboratory method for evaluating vehicle seat vibration. Application to railway vehicles GME/21/6 BS ISO 10526:2007 CIE standard illuminants for colorimetry CPL/34 BS ISO/TR :1999 Fire safety engineering. Design fire scenarios and design fires FSH/24 BS ISO/TR :1999 Fire safety engineering. Assessment and verification of mathematical fire models FSH/24 BS ISO 9129:2008 Motorcycles. Measurement methods for moments of inertia AUE/14 BS ISO 9696:2007 Water quality. Measurement of gross alpha activity in non-saline water. Thick source method EH/3 BS ISO 10001:2007 Quality management. Customer satisfaction. Guidelines for codes of conduct for organizations SVS/0 BS ISO 10002:2004 Quality management. Customer satisfaction. Guidelines for complaints handling in organizations SVS/0 BS ISO 10003:2007 Quality management. Customer satisfaction. Guidelines for dispute resolution external to organizations SVS/0 BS ISO 10155:1995 Stationary source emissions. Automated monitoring of mass concentrations of particles. Performance characteristics, test methods and specifications EH/2/1 BS ISO 10227:1996 Human/human surrogate impact (single shock) testing and evaluation. Guidance on technical aspects GME/21/6 BS ISO :1999 Fire-resistance tests. Fire dampers for air distribution systems. Guidance on the test method FSH/22 BS ISO :1994 Industrial automation systems and integration. Product data representation and exchange. Application protocol. Configuration controlled design AMT/4 BS ISO 10605:2008 Road vehicles. Test methods for electrical disturbances from electrostatic discharge AUE/16 PD ISO/TR :2004 Comparison of worldwide lift safety standards. Electric lifts (elevators) MHE/4 PD ISO/TR :2006 Comparison of worldwide lift safety standards. Hydraulic lifts (elevators) MHE/4 BS ISO :2007 Colorimetry. CIE standard colorimetric observers STI/14 BS ISO :1998 Components for containment enclosures. Transfer systems such as plain doors, airlock chambers, double door transfer systems, leaktight connections for waste drums NCE/2 BS ISO 12199:2000 Alphabetical ordering of multilingual terminological and lexicographical data represented in the Latin alphabet TS/1 BS ISO/TR 12470:1998 Fire resistance tests. Guidance on the application and extension of results FSH/22 BS ISO :2007 Thermal insulation products. Exterior insulating systems for foundations. Principal responsibilities of installers B/540 BS ISO 12794:2000 Nuclear energy. Radiation protection. Individual thermoluminescence dosemeters for extremities and eyes NCE/2 BS ISO/TR :1999 Fire safety engineering. Application of fire performance concepts to design objectives FSH/24 BS ISO/TR :1999 Fire safety engineering. Initiation and development of fire and generation of fire effluents FSH/24 BS ISO/TR :1999 Fire safety engineering. Movement of fire effluents FSH/24 BS ISO/TR :1999 Fire safety engineering. Structural response and fire spread beyond the enclosure of origin FSH/24 BS ISO/TR :1999 Fire safety engineering. Detection, activation and suppression FSH/24 BS ISO/TR :1999 Fire safety engineering. Life safety. Occupant behaviour, location and condition FSH/24 BS ISO 13988:2008 Passenger vehicle wheels. Clip balance weight and rim flange nomenclature, test procedures and performance requirements AUE/4 BS ISO 14137:2000 Machine tools. Test conditions for wire electrical-discharge machines (wire EDM). Terminology and testing of the accuracy MTE/1 BS ISO 14164:1999 Stationary source emissions. Determination of the volume flowrate of gas streams in ducts. Automated method EH/2/1 BS ISO :2000 Mineral and sapphire watch-glasses. Dimensions and tolerances STI/53 BS ISO 14488:2007 Particulate materials. Sampling and sample splitting for the determination of particulate properties LBI/37 42 Prices may be subject to change. Update Standards Jan 2011

43 BS ISO 14625:2007 Space systems. Ground support equipment for use at launch, landing or retrieval sites. General requirements ACE/68/-/3 PD ISO/TR :2005 Comparison of worldwide escalator and moving walk safety standards. Rule by rule comparison MHE/4 BS ISO 15364:2007 Ships and marine technology. Pressure/vacuum valves for cargo tanks SME/32/-/3 BS ISO 15389:2001 Space systems. Flight-to-ground umbilicals ACE/68 BS ISO/IEC :2005 Information technology. CDIF semanic metamodel. Data models IST/15 BS ISO 15484:2008 Road vehicles. Brake lining friction materials. Product Definition and quality assurance AUE/11 BS ISO 15741:2001 Paints and varnishes. Friction-reduction coatings for the interior of on- and offshore steel pipelines for non-corrosive gases STI/27 BS ISO 15911:2000 (BS :2001) Methods of test for petroleum and its products. Estimation of net specific energy of aviation turbine fuels using hydrogen content data PTI/13 BS ISO 16016:2000 Technical product documentation. Protection notices for restricting the use of documents and products TDW/4 BS ISO 16107:2007 Workplace atmospheres. Protocol for evaluating the performance of diffusive samplers EH/2/2 BS ISO 16454:2007 Space systems. Structural design. Stress analysis requirements ACE/68/-/1 DD ISO/TS 16553:2006 Road vehicles. Data cables. Test methods and requirements AUE/16 BS ISO 16702:2007 Workplace air quality. Determination of total organic isocyanate groups in air using 1-(2- methoxyphenyl) piperazine and liquid chromatography EH/2/2 PD ISO/TR 16764:2003 Lifts, escalators and passenger conveyors. Comparison of worldwide standards on electromagnetic interference/electromagnetic compatibility MHE/4 BS ISO 17751:2007 Textiles. Quantitative analysis of animal fibres by microscopy. Cashmere, wool, speciality fibres and their blends TCI/80 DD ISO/TS 17924:2007 Soil quality. Assessment of human exposure from ingestion of soil and soil material. Guidance on the application and selection of physiologically based extraction methods for the estimation of the human bioaccessibility/bioavailability of metals in soil EH/4 BS ISO/IEC :2005 Information technology. Security techniques. IT network security. Securing remote access IST/33 BS ISO :2007 Measurement of radioactivity in the environment. Soil. Guidance for the selection of the sampling strategy, sampling and pretreatment of samples NCE/2 BS ISO :2007 Measurement of radioactivity in the environment. Soil. Measurement of gammaemitting radionuclides NCE/2 DD ISO/PAS :2007 Ease of operation of everyday products. Test method for the installation of consumer products PH/9 PD ISO/TR 20432:2007 Guidelines for the determination of the longterm strength of geosynthetics for soil reinforcement B/553 BS ISO 20858:2007 Ships and marine technology. Maritime port facility security assessments and security plan development SME/32 BS ISO :2008 Road vehicles. Test of braking systems on vehicles with a maximum authorized total mass of over 3,5 t using a roller brake tester. Air over hydraulic and purely hydraulic braking systems AUE/11 BS ISO :2007 Workplace atmospheres. Determination of inorganic acids by ion chromatography. Nonvolatile acids (sulphuric acid and phosphoric acid) EH/2/2 BS ISO 21460:2007 Space data and information transfer systems. Proximity-1 space link protocol. Physical layer ACE/68/-/7 BS ISO 21930:2007 Sustainability in building construction. Environmental declaration of building products B/558 BS ISO 21995:2008 Road vehicles. Test of vehicle air braking systems with a permissible mass of over 3,5 t. Acquisition and use of reference values using a roller brake tester AUE/11 BS ISO 22010:2007 Space systems. Mass properties control ACE/68/-/1 DD ISO/TS 22240:2008 Road vehicles. Vehicles safety information model (VSIM) AUE/7 BS ISO 16253:2007 Watch-cases and accessories. Vapour phase deposited coatings STI/53 BS ISO 18695:2007 Textiles. Determination of resistance to water penetration. Impact penetration test TCI/24 BS ISO 22663:2007 Space data and information transfer systems. Proximity-1 space link protocol. Data link layer ACE/68/-/7 BS ISO 16392:2007 Tyres. Electrical resistance. Test method for measuring electrical resistance of tyres on a test rig AUE/4 BS EN ISO/IEC :2009 Information technology. Learning, education and training. Quality management, assurance and metrics. General approach IST/43 BS ISO 22716:2007 Cosmetics. Good manufacturing practices (GMP). Guidelines on good manufacturing practices CW/217 Update Standards Jan 2011 Prices may be subject to change. 43

44 British Standards Under Review continued... BS ISO 22889:2007 Metallic materials. Method of test for the determination of resistance to stable crack extension using specimens of low constraint ISE/NFE/4/4 BS ISO :2007 Determination of the resistance to jet fires of passive fire protection materials. General requirements FSH/22/14 BS ISO :2008 Road vehicles. Modular vehicle communication interface (MVCI). Hardware design requirements AUE/16 BS ISO :2008 Road vehicles. Open diagnostic data exchange (ODX). Data model specification AUE/16 BS ISO 23041:2007 Space systems. Unmanned spacecraft operational procedures. Documentation ACE/68 BS ISO :2007 Soil quality. Sampling of soil invertebrates. Sampling, extraction and identification of soilinhabiting nematodes EH/4 BS ISO 23828:2008 Fuel cell road vehicles. Energy consumption measurement. Vehicles fuelled with compressed hydrogen PEL/69 BS ISO :2007 Water quality. Biochemical and physiological measurements on fish. Sampling of fish, handling and preservation of samples EH/3/5 DD ISO/TS :2007 Water quality. Biochemical and physiological measurements on fish. Determination of ethoxyresorufin-o-deethylase (EROD) EH/3/5 PD ISO/IEC TR 24710:2005 Information technology. Radio frequency identification for item management. Elementary tag licence plate funtionality for ISO/IEC air interface definitions IST/34 BS ISO 25861:2007 Ships and marine technology. Navigation. Daylight signalling lamps EPL/80 BS ISO 25981:2008 Road vehicles. Connectors for the electrical connection of towing and towed vehicles. Connectors for electronically monitored charging systems with 12 V or 24 V nominal supply voltage AUE/16 BS ISO :2008 Road vehicles. End-of-life activation of onboard pyrotechnic devices. General information and use case definitions AUE/16 BS ISO :2008 Road vehicles. End of-life activation of on-board pyrotechnic devices. Communication requirements AUE/16 BS ISO 28001:2007 Security management systems for the supply chain. Best practices for implementing supply chain security, assessments and plans. Requirements and guidance SME/32 BS AU :2000 (ISO 13328:2000) Tyres and wheels. Tyres. Motorcycle tyres. Method of measuring tyre rolling circumference for new tyres under loaded conditions AUE/4 NEW WORK STARTED The reference number of the committee responsible for each item of new work started is given after each entry. Where a work item has the temporary designation BS EN XXXX, it has not yet been allocated a standard number by the European standards body. BS 1922:1987/A2 Specification for glass dispensing measures for pharmaceutical purposes LBI/3 BS :2006/A1 Industrial type flooring and stair treads. Common design requirements and recommendations for installation B/208/1 BS 6203 Guide to fire characteristics and fire performance of expanded polystyrene materials (EPS and XPS) used in building applications will supersede BS 6203:2003 PRI/26 BS 7872 Manned security services. Cash-in-transit services (collection and delivery). Code of practice will supersede BS 7872:2002 GW/3 PD XXXX Business continuity management. Guidance on supply chain continuity BCM/1 PD Guidance on supply chain continuity BCM/1 BS XXXXX-1 Non-destructive testing. Guided wave examination. General principles WEE/46 BS XXXXX-2 Non-destructive testing. Guided wave examination. Testing of pipes, pipelines and structural tubular members WEE/46 EN WI Stationary source emissions. Determination of velocity and volumetric flow in ducts. Manual method EH/2/1 EN WI Stationary source emissions. Determination of velocity and volumetric flow in ducts. Automated measuring systems EH/2/1 EN 228 Automotive fuels. Unleaded petrol. Requirements and test methods will supersede BS EN 228:2008 PTI/2 EN 490 Concrete roofing tiles and fittings for roof covering and wall cladding. Product specifications will supersede BS EN 490:2004+A1:2006 B/542/2 EN 491 Concrete roofing tiels and fittings for roof covering and wall cladding. Test methods will supersede BS EN 491:2004 B/542/2 EN :2008/A1 Execution of steel structures and aluminium structures. Technical requirements for the execution of steel structures CB/ Prices may be subject to change. Update Standards Jan 2011

45 EN 1156 Wood-based panels. Determination of duration of load and creep factors will supersede DD ENV 1156:1999 B/541 EN 3813 Aerospace series. Titanium alloy TI-P Annealed. Bar and wire for forged fasteners. De < or µ 25 mm ACE/61 EN Hot rolled products of structural steels. General technical delivery conditions will supersede BS EN :2004 ISE/103 EN 1191 Windows and doors. Resistance to repeated opening and closing. Test method will supersede BS EN 1191:2000 B/538/1 EN Aerospace series. Flammability of non-metallic materials. Small burner test, vertical. Determination of the vertical flame propagation ACE/65 EN Hot rolled products of structural steels. Technical delivery conditions for non-alloy structural steels will supersede BS EN :2004 ISE/103 EN Domestic direct gas-fired tumble dryers of types B22D and B23D, of nominal heat input not exceeding 6 kw. Safety will supersede BS EN :2000 GSE/37 EN Domestic direct gas-fired tumble dryers of types B22D and B23D, of nominal heat input not exceeding 6 kw. Rational use of energy will supersede BS EN :1999 GSE/37 EN Leisure accommodation vehicles. 12 V direct current extra low voltage electrical installations. Caravans will supersede BS EN :2004 B/511 EN Leisure accommodation vehicles. 12 V direct current extra low voltage electrical installations. Motor caravans will supersede BS EN :2005 B/511 EN 2491 Molybdenum disulphide dry lubricants. Coating methods will supersede BS EN 2491:1997 ACE/12 EN Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures. 65 C to 175 C continuous, 200 C continuous, 260 C peak. Square flange receptacle with integrated accessory. Product standard ACE/6 EN Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures. 65 C to 175 C continuous, 200 C continuous, 260 C peak. Jam-nut mounted receptacle with integrated accessory. Product standard ACE/6 EN Aerospace series. Flammability of non-metallic materials. Small burner test, horizontal. Determination of the horizontal flame propagation ACE/65 EN Aerospace series. Flammability of non-metallic materials. Small burner test, 45. Determination of the resistance of material to flame and glow propagation and to flame penetration ACE/65 EN 4160 Aerospace series. Non-metallic materials. Paints and varnishes. Test methods. Determination of the effect of thermal exposure ACE/65 EN 4476 Aerospace series. Paints and varnishes. Polyurethane. Cold curing intermediate coat ACE/65 EN ISO Corrosion of metals and alloys. Stress corrosion testing. Preparation and use of pre-cracked specimens for tests under constant load or constant displacement will supersede BS EN ISO :2003 ISE/NFE/8 EN ISO 7751:1997/A1 Rubber and plastics hoses and hose assemblies. Ratios of proof and burst pressure to design working pressure PRI/66 CEN/TR Ergonomics of human-system interaction. Introduction to standards related to software ergonomics PH/9 EN Aerospace series. LOTAR. LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data. Fundamentals and concepts ACE/66 EN Hot rolled products of structural steels. Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels will supersede BS EN :2004 ISE/103 EN Hot rolled products of structural steels. Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels will supersede BS EN :2004 ISE/103 EN Hot rolled products of structual steels. Technical delivery conditons for structural steels with improved atmospheric corrosion resistance will supersede BS EN :2004 ISE/103 EN Hot rolled products of structural steels. Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition will supersede BS EN :2004+A1:2009 ISE/103 EN Specification for hot-rolled flat products made of high yield strength steels for cold forming. General delivery conditions will supersede BS EN :1996 ISE/103 EN Specification for hot-rolled flat products made of high yield strength steels for cold forming. Delivery conditions for thermomechanically rolled steels will supersede BS EN :1996 ISE/103 EN Specification for hot-rolled flat products made of high yield strength steels for cold forming. Delivery conditions for normalized or normalized rolled steels will supersede BS EN :1996 ISE/103 Update Standards Jan 2011 Prices may be subject to change. 45

46 New Work Started continued... EN Manual wheelchairs. Requirements and test methods will supersede BS EN 12183:2009 CH/173 EN Copper and copper alloys. Seamless, round tubes for general purposes will supersede BS EN 12449:1999 NFE/34/1 EN Stationary source emissions. Determination of the mass concentration of total gaseous organic carbon at low concentrations in flue gases. Continuous flame ionization detector method will supersede BS EN 12619:1999 EH/2/1 EN ISO Tissue paper and tissue products. Determination of optical properties will supersede BS EN ISO :2007 PAI/11 EN Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas will supersede BS EN 13043:2002 B/502 EN Aggregates for mortar will supersede BS EN 13139:2002 B/502 EN Leak detection systems. Tank gauge leak detection systems will supersede BS EN :2004 PVE/393/2 EN ISO Thermoplastics piping systems for non-pressure applications. Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings. Determination of the viscosity number and K-value will supersede BS ISO 13229:2010 PRI/88 EN Potentially explosive atmospheres. Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres will supersede BS EN 13237:2003 FSH/23 EN Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction will supersede BS EN 13242:2002+A1:2007 B/502 EN ISO Thermoplastics piping systems for non-pressure underground drainage and sewerage. Test method for resistance to combined temperature cycling and external loading will supersede BS ISO 13260:2010 PRI/88 EN Fertilizers. Determination of chelating agents in fertilizers by chromatography. Determination of Fe chelated by o,o-eddha and o,o-eddhma by ion pair chromatography will supersede BS EN :2007 CII/37 EN Paints and varnishes. Powder organic coatings for galvanized or sherardised steel products for construction purposes will supersede BS EN 13438:2005 STI/27/1 EN 13683:2003+A1:2009/A2 Garden equipment. Integrally powered shredders/chippers. Safety AGE/20 EN Communications systems for and remote reading of meters. Dedicated application layer will supersede BS EN :2004 PEL/894 EN Fume cupboards. Fume cupboards for high heat and acidic load LBI/18 CEN/TR Solid biofuels. Methods for the determination of particle size distribution. Rotary screen method will supersede DD CEN/TS :2006 PTI/17 EN Solid biofuels. Methods for the determination of particle density will supersede DD CEN/TS 15150:2005 PTI/17 CEN/TS Postal service. Statement of mailing submission will supersede DD CEN/TS 15523:2006 SVS/4 CEN/TR Postal service. Customer-directed information including track and trace. General concepts and definitions will supersede DD CEN/TS 15524:2006 SVS/4 EN Fertilizers. Determination of the fineness of grinding of soft natural phosphates will supersede DD CEN/TS 15924:2009 CII/37 EN Fertilizers. Extraction of total sulfur present in various forms will supersede DD CEN/TS 15925:2009 CII/37 EN Fertilizers. Extraction of water soluble sulfur where the sulfur is in various forms will supersede DD CEN/TS 15926:2009 CII/37 EN Fertilizers. Extraction of phosphorus soluble in mineral acids will supersede DD CEN/TS 15956:2009 CII/37 EN Fertilizers. Extraction of phosphorus which is soluble in neutral ammonium citrate will supersede DD CEN/TS 15957:2009 CII/37 EN Railway applications. Testing for the acceptance of running characteristics of railway vehicles. Freight wagons. Conditions for dispensation of freight wagons with defined characteristics from on-track tests according to EN RAE/1/-/8 EN Evaluation of conformity of aggregates B/502 EN Classification of non-electrical sources of incoherent optical radiation CPL/34/10 CEN/TS Postal services. Open interface between machine control and reading coding system. MC/RC-interface SVS/4 CEN/TR Installation rules of fibrous plaster works B/544/3 EN Light transmitting flat solid polycarbonate (PC) sheets for internal and external roofs, walls and ceilings. Requirements and test methods B/542/1 46 Prices may be subject to change. Update Standards Jan 2011

47 EN ISO :2005/A1 Petroleum and natural gas industries. Specific requirements for offshore structures. Stationkeeping systems for floating offshore structures and mobile offshore units B/525/12 EN Rotating electrical machines. On-line partial discharge measurements on the stator winding insulation of rotating electrical machines PEL/2 EN F66 Mechanical standardization of semiconductor devices. Dimensions EPL/47 EN F67 Mechanical standardization of semiconductor devices. Dimensions EPL/47 EN F68 Mechanical standardization of semiconductor devices. Dimensions EPL/47 EN F69 Mechanical standardization of semiconductor devices. Dimensions EPL/47 EN Safety of machinery. Electrical equipment of machines. General requirements will supersede BS EN :2006+A1:2009 MCE/3 EN Safety of machinery. Electrical equipment of machines. Particular safety and EMC requirements for sewing machines, units and systems will supersede BS EN :1998 MCE/3 EN :2009/A1 Low-voltage fuses. Supplementary requirements for fuse-links for the protection of semiconductor devices PEL/32 EN :1999/A2 Plugs, socket-outlets and couplers for industrial purposes. General requirements PEL/23/4 EN :1999/A2 Plugs, socket-outlets and couplers for industrial purposes. Dimensional interchangeability requirements for pin and contact-tube accessories PEL/23/4 EN Low-voltage electrical installations. Requirements for special installations or locations. Marinas and similar locations JPEL/64 EN Transitions, pulses and related waveforms. Terms, definitions and algorithms PEL/85 EN Optical fibres. Measurement methods and test procedures. Chromatic dispersion will supersede BS EN :2007 GEL/86/1 EN Mechanical structures for electronic equipment. Modular order for the development of mechanical structures for electronic equipment practices. Cabinet interface dimensions for miscellaneous equipment EPL/48 EN Low-voltage switchgear and controlgear assemblies. Assemblies for use in marinas and similar locations (AMH), camping sites and similar locations (ACC), market squares and other similar external public sites (AMS) PEL/17/3 EN Safety of machinery. Electro-sensitive protective equipment. Particular requirements for equipment using active opto-electronic protective devices (AOPDs) will supersede DD CLC/TS :2006 MCE/3 EN VHDL Language Reference Manual GEL/93 EN Fibre optic interconnecting devices and passive components. Performance standard. Nonconnectorised single-mode 1xN and 2xN nonwavelength. Selective branching devices for Category O. Uncontrolled environment GEL/86/2 EN Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces. Type LF3 connector family GEL/86/2 EN Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces. Type BLINK in-house connector with shutter family GEL/86/2 EN Fibre optic interconnecting devices and passive components. Fibre optic connector optical interfaces. Optical interface, 2,5 mm and 1,25 mm diameter cylindrical PC ferrule for reference connector, single mode fibre GEL/86/2 EN Fibre optic interconnecting devices and passive components. Fibre optic connector optical interfaces. Optical interface, 2,5 mm and 1,25 mm diameter cylindrical APC ferrule for reference connector, single mode fibre GEL/86/2 EN Electricity metering equipment (AC). General requirements, test and test conditions. Product safety requirements PEL/13 EN ISO/IEC Electricity metering. Data exchange for meter reading, tariff and load control. Object identification system (OBIS) will supersede BS EN :2007 PEL/13 EN ISO/IEC Electricity metering. Data exchange for meter reading, tariff and load control. Interface classes will supersede BS EN :2007 PEL/13 EN Harmonization of quality codes across TC 57. Naming and design rules for CIM profiles to XML schema mapping PEL/57 EN :2010/A1 Industrial communication networks. High availability automation networks. General concepts and calculation methods AMT/7 EN :2010/A1 Industrial communication networks. High availability automation networks. Parallel redundancy protocol (PRP) and high availability seamless redundancy (HSR) AMT/7 EN :2010/A1 Industrial communication networks. High availability automation networks. Crossnetwork redundancy protocol (CRP) AMT/7 EN System verilog. Unified hardware design, specification, and verification language GEL/93 Update Standards Jan 2011 Prices may be subject to change. 47

48 New Work Started continued... EN D display devices. Terminology and letter symbols EPL/47 EN Lightning safety procedures and guidelines. Introduction to standards related to software ergonomics GEL/81 EN :2010/A1 Medical electrical equipment. Particular requirements for the basic safety and essential performance of automated non-invasive sphygmomanometers CH/62/4 ISO 75-1 Plastics. Determination of temperature of deflection under load. General test method will supersede BS EN ISO 75-1:2004 PRI/21 ISO 127 Rubber lattices. Methods of test. Determination of KOH number of natural rubber lattices will supersede BS :1996 PRI/50/-/1 ISO 525 Bonded abrasive products. General requirements. Specification for general features of abrasive wheels, segments, bricks and sticks will supersede BS ISO 525:1999 MTE/13 ISO Rubber, vulcanized. Determination of temperature rise and resistance to fatigue in flexometer testing. Constant-stress flexometer will supersede BS ISO :2007 PRI/22 ISO 6751 Tools for moulding. Ejector pins with cylindrical head will supersede BS ISO 6751:1998 MTE/12 ISO 7010:2003/A7 Graphical symbols. Safety colours and safety signs. Safety signs used in workplaces and public areas PH/8/1 ISO 7010:2003/A109 Graphical symbols. Safety colours and safety signs. Safety signs used in workplaces and public areas PH/8/1 ISO 7010:2003/A110 Graphical symbols. Safety colours and safety signs. Safety signs used in workplaces and public areas PH/8/1 ISO 7010:2003/A111 Graphical symbols. Safety colours and safety signs. Safety signs used in workplaces and public areas PH/8/1 ISO 7010:2003/A117 Graphical symbols. Safety colours and safety signs. Safety signs used in workplaces and public areas PH/8/1 ISO 7010:2003/A118 Graphical symbols. Safety colours and safety signs. Safety signs used in workplaces and public areas PH/8/1 ISO 7130 Guide to procedure for operator training for earth-moving machinery will supersede BS 6264:1982 B/513/1 ISO 7210 Routine analytical cigarette smoking machine. Methods of non-routine evaluation will supersede BS :1997 AW/40 ISO 7597 Forged steel lifting hooks with point and eye for use with steel chains of grade T MHE/1 ISO 8693 Tools for moulding. Flat ejector pins will supersede BS ISO 8693:1998 MTE/12 ISO Plastics. Determination of creep behaviour. Tensile creep will supersede BS EN ISO 899-1:2003 PRI/21 ISO 7010:2003/A112 Graphical symbols. Safety colours and safety signs. Safety signs used in workplaces and public areas PH/8/1 ISO 8694 Tools for moulding. Shouldered ejector pins will supersede BS ISO 8694:1998 MTE/12 ISO 2971 Methods for determination of physical properties of tobacco and tobacco products. Nominal diameter of cigarettes and filter rods using a laser beam measuring apparatus will supersede BS :1998 AW/40 ISO 2974 Diesel engines. High-pressure fuel injection pipe end-connections with 60 female cone will supersede BS ISO 2974:2005 MCE/22 ISO Cigarettes. Determination of loss of tobacco from the ends. Method using a vibro-bench AW/40 ISO Plain bearings. Hardness testing of bearing metals. Solid materials MCE/12 ISO 7010:2003/A113 Graphical symbols. Safety colours and safety signs. Safety signs used in workplaces and public areas PH/8/1 ISO 7010:2003/A114 Graphical symbols. Safety colours and safety signs. Safety signs used in workplaces and public areas PH/8/1 ISO 7010:2003/A115 Graphical symbols. Safety colours and safety signs. Safety signs used in workplaces and public areas PH/8/1 ISO 7010:2003/A116 Graphical symbols. Safety colours and safety signs. Safety signs used in workplaces and public areas PH/8/1 ISO Dentistry. Extraction forceps. Design and dimensions CH/106/4 ISO Press tools. Wear plates for press dies, type B will supersede BS :1993 MTE/12 ISO/IEC 9899 Programming languages. C will supersede BS ISO/IEC 9899:1999 IST/5 ISO :2000/A1 Rubber and rubber products. Determination of the composition of vulcanizates and uncured compounds by thermogravimetry. Acrylonitrilebutadiene and halobutyl rubbers PRI/23 48 Prices may be subject to change. Update Standards Jan 2011

49 ISO Quality management. Customer satisfaction. Guidelines for monitoring and measuring will supersede DD ISO/TS 10004:2010 QS/1 ISO Tools for pressing. Punch holder shanks. Type A will supersede BS ISO :1998 MTE/12 ISO Plastics. Acquisition and presentation of comparable single-point data. Moulding materials will supersede BS EN ISO :2008 PRI/21 ISO Petroleum products. Determination of carbon residue. Micro method will supersede BS EN ISO 10370:1996, BS :1996 PTI/13 ISO Sterilization of health care products. Chemical indicators. General requirements will supersede BS EN ISO :2009 LBI/35 ISO Mechanical contraceptives. Guidance for clinical evaluation of intra-uterine contraceptive devices (IUDs) CH/157 ISO Mechanical female contraceptive devices. Tubal ligation/fallopian rings CH/157 ISO Protective clothing for use in welding and allied processes will supersede BS EN ISO 11611:2007 PH/3/2 ISO Protective clothing. Clothing to protect against heat and flame will supersede BS EN ISO 11612:2008 PH/3/2 ISO Tractors and machinery for agriculture and forestry. Serial control and communications data network. Mobile data element dictionary will supersede BS ISO :2007 AGE/6/1 ISO Crisis management of water utilities CB/503 ISO Clothing for protection against heat and flame. Determination of contact heat transmission through protective clothing or constituent materials. Test method using contact heat produced by heating cylinder PH/3/2 ISO :2008/A1 Wood-based panels. Determination of formaldehyde release. Desiccator method B/541 ISO :2003/A1 External exposure of roofs to fire. Test method FSH/22 ISO Graphic technology. Prepress digital data exchange. Scene-referred standard colour image data (RIMM/SCID) PAI/43 ISO Textiles. Determination of fabric propensity to surface fuzzing and to pilling. Determination using a random tumble method TCI/24 ISO Seismic actions on nonstructural components for building applications B/525/1 ISO Corrosion of metals and alloys. Cathodic protection. Engineering symbols ISE/NFE/8 ISO Dentistry. Periodontal curettes, dental scalers and excavators. Periodontal curettes of Gr-type will supersede BS EN ISO :2005 CH/106/4 ISO Geotextiles and geotextile-related products. Abrasion damage simulation (sliding block test) will supersede BS EN ISO 13427:1998 B/553 ISO Protective clothing. Protection against heat and flame. Limited flame spread materials, material assemblies and clothing will supersede BS EN ISO 14116:2008 PH/3/12 ISO/TR Safety of machinery. Risk assessment. Practical guidance and examples of methods MCE/3 ISO Health informatics. Personal health record. Definition, scope and context IST/35 ISO Calculation method of CO2 emission intensity from iron and steel production. Steel plant with blast furnace ISE/1 ISO Calculation method of CO2 emission intensity from iron and steel production. Steel plant with EAF (Electic Arc Furnace) ISE/1 ISO Hydraulic fluid power. Screw-to-connect quickaction couplings for very high pressure fluid power applications. Dimensions and requirements MCE/18/-/4 ISO Hydraulic fluid power. Screw-to-connect quickaction couplings for general purpose. Dimensions and requirements MCE/18/-/4 ISO Petroleum and natural gas industries. Downhole equipment. Accessory completion equipment PSE/17/-/4 ISO/IEC Information technology. Automatic identification and data capture techniques. Bar code verifier conformance specification. Twodimensional symbols will supersede BS EN ISO/IEC :2005 IST/34 ISO/IEC :2004/A3 Information technology. JPEG 2000 image coding system. ISO base media file format IST/37 ISO/TR Buildings and constructed assets. Service life planning. Terminology CB/101 ISO Durability. Service life design of concrete structures B/517 ISO Metric series wires for measuring screw threads FME/9 ISO Acoustics. Laboratory measurement of the reduction of transmitted impact noise by floor coverings on a reduced size standard floor. Heavyweight floor EH/1 Update Standards Jan 2011 Prices may be subject to change. 49

50 New Work Started continued... ISO Rubber and plastics hoses and hose assemblies, wire- or textile-reinforced, for hydraulic-jack applications. Specification PRI/66 ISO Textiles. Determination method of carcinogenic dyestuffs. Acid dyestuffs TCI/80 ISO Non-structural timber grading requirements B/543 ISO Textiles. Measurement of exothermic and endothermic properties of textiles under humidity change TCI/24 ISO Test methods for wood-plastic composite (WPC) deck boards PRI/75 ISO Water quality. Guidelines for quantitative sampling and sample processing of marine softbottom macro-fauna will supersede BS EN ISO 16665:2005, BS :2005 EH/3/5 ISO Non-destructive testing. Ultrasonic testing. General principles WEE/46 ISO Non-destructive testing. Ultrasonic testing. Sensitivity and range setting WEE/46 ISO Non-destructive testing. Ultrasonic testing. Transmission technique WEE/46 ISO Non-destructive testing. Ultrasonic testing. Characterization and verification of ultrasonic thickness measuring equipment WEE/46 ISO/TR Hydraulic fluid power. Hose assemblies. Recommended practices for hydraulic hose assemblies will supersede PD ISO/TR :2006 MCE/18/-/4 ISO Ships and marine technology. High-pressure floating pneumatic rubber fenders will supersede BS ISO 17357:2002 SME/32/-/4 ISO Space systems. General test documentation ACE/68/-/2 ISO Press tools for tablets. Punches and dies will supersede BS ISO 18084:2005 MTE/12 ISO Rubber hoses and hose assemblies. Wire- or textile-reinforced single pressure types for hydraulic applications. Specification will supersede BS ISO 18752:2006 PRI/66 ISO Imaging materials. Photographic reflection prints. Methods for measuring indoor light stability CPW/42 ISO Microbeam analysis. Quantitative analysis using energy-dispersive spectrometry (EDS) will supersede BS ISO 22309:2006 CII/9 ISO Dentistry. Screening method for erosion potential of oral rinses CH/106/7 ISO/IEC Information technology. Automatic identification and data capture techniques. Air Interface for security services and file management for RFID architecture IST/34 ISO Condoms. Guidance on clinical studies. Female condoms, functionality studies of acute failure events based on self-reports CH/157 ISO Fire safety. Intermediate-scale fire-resistance tests. Tests for fibre-reinforced polymer composites PRI/21 ISO/IEC TR General technical principles of Service Oriented Architecture (SOA) ICT/-/1 IEC Industrial communication networks. Network and system security. Establishing an industrial automation and control system security program GEL/65 ISO :2009/A1 Quantities and units. Physical chemistry and molecular physics SS/7 Help Us to Help You! ISO Non-destructive testing. Ultrasonic testing. Examination for discontinuities perpendicular to the surface WEE/46 ISO Non-destructive testing. Ultrasonic testing. Characterization and sizing of discontinuities WEE/46 ISO Non-destructive testing. Ultrasonic testing. Time-of-flight diffraction technique as a method for detection and sizing of discontinuities WEE/46 ISO Societal security. Video surveillance format for interoperability SSM/1 ISO Ophthalmic optics and instruments. Instruments to measure axial distances in the eye CH/172/6 ISO/IEC Information technology. Office equipment. Method for measuring digital copying machine productivity will supersede BS ISO/IEC 24735:2009 IST/3 Always quote your Customer Number Don t know your number? Contact Customer Services who will be happy to check it for you 50 Prices may be subject to change. Update Standards Jan 2011

51 DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT NATIONAL BRITISH STANDARDS You may now comment on any National British Standard online. BSI British Standards has launched a Draft Review system which allows access to the drafts of all National British Standards. To enhance access of Drafts for Public Comment for the wider community, make comments more visible and move into collaborative working practices, you will now be able to comment on any National British Standard by visiting All you need to do is register. This service is free of charge. Please note that the only standards available on this service are pure British Standards (National Standards e.g: BS XXXX). European and international documents are not included at this time. Deadlines for receipt of comments on each of the individual drafts can be found at The deadline for the following drafts is 28 February, 2011 unless otherwise stated. Should you wish to receive these drafts in hard copy format, they are available for a fee from BSI Customer Services (see How to order on page 2). 10/ DC BS 8905 Framework for the sustainable use of materials. Guide MI/1 10/ DC BS 6896 Specification for installation of gasfired overhead radiant heaters for industrial and commercial heating (2nd and 3rd family gases) GSE/30/-/17 10/ DC BS 8020 Tools for live working. Specification for insulating hand tools for work on or near conductor rail systems operating at voltages up to 1000 V A.C. or 1500 D.C. PEL/78 10/ DC BS 1922 A2 Specification for glass dispensing measures for pharmaceutical purposes LBI/3 10/ DC PD 5500 A3 Specification for unfired fusion welded pressure vessels PVE/1 DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT ADOPTIONS All Draft British Standards are available from BSI Customer Services (see How to order on page 2) Most drafts are charged at to members and to non-members. Larger draft documents are charged at a higher price according to the number of pages and are priced individually below. Comments are welcome and should be sent to Debbie Stead, Head of Committee Service Centre Operations, BSI Head Office, 389 Chiswick High Road, London W4 4AL by 28 February, 2011 unless otherwise stated, to be considered by the relevant BSI committee. Draft standards may be modified before adoption and issue as British Standards. 10/ DC BS ISO/IEC Information technology. Security techniques. Message authentication codes (MACs). Mechanisms using a universal hash function IST/33 10/ DC BS ISO/IEC Information technology. Security techniques. A framework for identity management. Terminology and concepts IST/33 10/ DC BS EN ISO Petroleum and natural gas industries. Design and operation of subsea production systems. Remotely operated tools and interfaces on subsea production systems PSE/17/-/4 10/ DC BS ISO/IEC Information technology. Security techniques. Guidelines for information security management systems auditing IST/33 10/ DC BS ISO/IEC Information technology. Security techniques. Privacy framework IST/33 10/ DC BS EN A1 Safety of machinery. Safety requirements for the design and construction of printing and paper converting machines. Machines for the production of corrugated board and machines for the conversion of flat and corrugated board MCE/3/9 26 February, / DC BS ISO Geographic information. Classification systems. Land Cover Meta Language (LCML) members, non-members IST/36 10/ DC BS ISO/IEC Information technology. Security techniques. Verification of cryptographic protocols IST/33 10/ DC BS EN ISO Non-destructive testing of welds. Radiographic testing. X- and gamma-ray techniques with film WEE/46 7 March, / DC BS EN ISO Non-destructive testing of welds. Radiographic testing. X- and gamma-ray techniques with digital detectors WEE/46 7 March, / DC BS ISO Gas cylinders of composite construction. Specification and test methods. Hoop wrapped composite gas cylinders and tubes PVE/3/3 25 February, / DC BS ISO Gas cylinders. Refilable composite reinforced tubes of water capacity between 150 L and 3000 L. Design, construction and testing PVE/3 25 February, / DC BS ISO Gas cylinders of composite construction. Specification and test methods. Fully wrapped fibre reinforced composite gas cylinders and tubes with non-metallic and nonload-sharing metal liners PVE/3/3 25 February, / DC BS EN ISO Water quality. Determination of mercury. Method using atomic absorption spectrometry (AAS) with and without enrichment EH/3/2 10/ DC BS ISO Thermal spraying. Thermally sprayed coatings. Symbolic representation on drawings STI/33 Update Standards Jan 2011 Prices may be subject to change. 51

52 Draft British Standards for Public Comment continued... 10/ DC BS ISO Space systems. Programme management. Product assurance ACE/68/-/5 15 March, / DC BS ISO Soil quality. Determination of selected explosive compounds. Method using high-performance liquid chromatography (HPLC) with ultraviolet detection EH/4 10/ DC BS EN Wind turbines. Acoustic noise measurement techniques PEL/88 29 March, / DC BS ISO Nanomaterials. Quantification of nano-object release from powders by generation of aerosols NTI/1 31 January, / DC BS ISO Road vehicles. Compressed natural gas (CNG) fuel systems. Safety requirements GSE/40 19 February, / DC BS ISO Intelligent transport systems. Interface Protocol and Message Set Definition between Traffic Signal Controllers and Detectors (IPMSTSCD) EPL/278 10/ DC BS ISO Space systems. Early operations. Spacecraft initialization and commissioning ACE/68/-/2 25 February, / DC BS ISO Space systems. Early operations. Initialization plan ACE/68/-/2 25 February, / DC BS ISO Space systems. Early operations. Commissioning report ACE/68/-/2 25 February, / DC BS EN ISO Non-destructive testing of welds. Ultrasonic testing. Use of (semi-) automated phased array technology WEE/46 7 March, / DC BS ISO Personal equipment for protection against falls. Rope access systems. Code of practice PH/5 28 March, / DC BS EN Animal feeding stuffs. Determination of arsenic by hydride generation atomic absorption spectrometry (HGAAS) after microwave pressure digestion (Extraction with 65% nitric acid and 30% hydrogen peroxide) AW/10 10/ DC BS ISO Soil quality. Determination of selected explosive compounds. Method using gas chromatography (GC) with electron capture detection (ECD) or mass spectrometric detection (MS) EH/4 10/ DC BS ISO Earth-moving machinery. Trainer seat. Deflection limiting volume, space envelope and performance requirements B/513/1 25 February, / DC BS ISO Mechanical testing of metals. Ductility testing. Compression test for porous and cellular metals ISE/101/2 10/ DC BS ISO 6772 Aerospace. Fluid systems. Impulse testing of hydraulic hose, tubing and fitting assemblies ACE/69 18 February, / DC BS ISO Capability of detection. Methodology based on stochastic properties of instrumental noise SS/6 8 March, / DC BS ISO Automatic vehicle and equipment identification. Electronic Registration Identification (ERI) for vehicles. Secure communications using symmetrical techniques EPL/278 10/ DC BS ISO/IEC Information technology. Security techniques. Encryption algorithms. Stream ciphers IST/33 10/ DC BS ISO Societal security. Preparedness and continuity management systems. Requirements BCM/1 10/ DC BS EN Gas infrastructure. Pipelines for maximum operating pressure up to and including 16 bar. General functional recommendations GSE/33 10/ DC BS EN Gas infrastructure. Pipelines for maximum operating pressure up to and including 16 bar. Specific functional recommendations for polyethylene (MOP up to and including 10 bar) GSE/33 10/ DC BS EN Gas infrastructure. Pipelines for maximum operating pressure up to and including 16 bar. Specific functional recommendations for renovation GSE/33 10/ DC BS EN Gas infrastructure. Pressure testing, commissioning and decommissioning procedures. Functional requirements GSE/33 10/ DC BS EN ISO 1828 Health informatics. Categorial structure for classifications and coding systems of surgical procedures IST/35 10/ DC BS EN ISO Needle-based injection systems for medical use. Requirements and test methods. Needle-based injection systems CH/84 10/ DC BS EN ISO Sharps injury protection. Requirements and test methods. Sharps containers CH/84 10/ DC BS ISO 2561 Plastics. Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography PRI/82 52 Prices may be subject to change. Update Standards Jan 2011

53 10/ DC BS ISO 3598 Textile glass. Yarns. Basis for a specification PRI/42 10/ DC BS ISO Prefilled syringes. Plastic barrels for injectables CH/ February, / DC BS EN Solid biofuels. Sampling PTI/17 10/ DC BS EN Solid biofuels. Sample preparation PTI/17 10/ DC BS ISO Ships and marine technology. Maintenance and testing to reduce losses in critical systems for propulsion SME/32/-/3 10/ DC BS EN ISO 6341 Water quality. Determination of the inhibition of the mobility of Daphnia magna Straus (Cladocera, Crustacea). Acute toxicity test EH/3/5 10/ DC BS ISO/IEC Information technology. Learning, education, and training. Metadata for learning resources. Basic application profile IST/43 10/ DC BS ISO Network services billing SVS/0/3 10/ DC BS ISO Geographic information. Portrayal members, non-members IST/36 10/ DC BS ISO Industrial trucks. Verification of stability. Rough-terrain trucks with mast MHE/7 10/ DC BS EN Household and similar electrical appliances. Safety. Particular requirements for floor treatment machines for commercial use CPL/61/10 10/ DC BS EN Household and similar electrical appliances. Safety. Particular requirements for spray extraction machines for commercial use CPL/61/10 10/ DC BS EN Household and similar electrical appliances. Safety. Particular requirements for wet and dry vacuum cleaners, including power brush, for commercial use CPL/61/10 10/ DC BS EN Household and similar electrical appliances. Safety. Particular requirements for floor treatment machines with or without traction drive for commercial use CPL/61/10 10/ DC BS EN Household and similar electrical appliances. Safety. Particular requirements for high pressure cleaners and steam cleaners CPL/61/10 10/ DC BS EN Electrical safety in low voltage distribution systems up to 1000 V A.C and 1500 V D.C. Equipment for testing, measuring or monitoring of protective measures. Equipment for testing the safety of electrical equipment for machinery PEL/85 10/ DC BS ISO Colloidal systems. Methods for zeta-potential determination. Electroacoustic and electrokinetic phenomena LBI/37 10/ DC BS ISO Colloidal systems. Methods for zeta-potential determination. Optical methods LBI/37 10/ DC BS ISO A3 Security management systems for the supply chain. Guidelines for the implementation of ISO SME/32 18 January, / DC BS EN ISO Specification and qualification of welding procedures for metallic materials. Welding procedure test. Resistance butt (upset) and flash welding WEE/29 10/ DC BS EN Fibre optic interconnecting devices and passive components. Performance standards. Simplex and duplex cords with multimode fibre and cylindrical ferrule connectors for Category C. Controlled environment GEL/86/2 31 January, / DC BS EN Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Bending test for terminated cable assemblies GEL/86/2 15 January, / DC BS EN ISO 4920 Textiles. Determination of resistance to surface wetting (spray test) TCI/24 10/ DC BS ISO 6487 Road vehicles. Measurement techniques in impact tests. Instrumentation AUE/7 25 February, / DC BS EN Fibre optic interconnecting devices and passive components. Performance standard. Non-connectorised single-mode bidirectional OTDR monitoring WWDM devices for category C. controlled environment GEL/86/2 20 January, / DC BS EN ISO Petroleum, petrochemical and natural gas industries. Reciprocating positive displacement pumps MCE/6 10/ DC BS ISO/IEC Information technology. User interfaces. Accessibility of personal computer hardware ICT/-/6 19 April, / DC BS ISO/IEC Information technology. Security techniques. Lightweight cryptography. Block ciphers IST/33 10/ DC BS ISO/IEC A4 Information technology. Multimedia content description interface. Reference software IST/37 7 March, / DC BS EN ISO 2739 Sintered metal bushings. Determination of radial crushing strength ISE/65 Update Standards Jan 2011 Prices may be subject to change. 53

54 Draft British Standards for Public Comment continued... 10/ DC BS ISO/IEC Information technology. Document Schema Definition Languages (DSDL). Schema Association IST/41 18 February, / DC BS ISO/IEC A6 Information technology. Multimedia content description interface. Conformance testing, IST/37 7 March, / DC BS ISO Mechanical vibration. Vibration of rotating machinery equipped with active magnetic bearings. Technical guidelines GME/21/5 21 March, / DC BS EN Safety of woodworking machines. Circular sawing machines. Single blade log sawing machines with integrated feed table and manual loading and/or unloading MTE/23 10/ DC BS EN Safety of woodworking machines. Circular sawing machines. Single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading MTE/23 10/ DC BS ISO A1 Security management systems for the supply chain. Guidelines for the implementation of ISO SME/32 18 January, / DC BS EN Insulating liquids. Quantitative determination of corrosive sulfur compounds in used and unused insulating liquids. Test method for quantitative determination of dibenzyl disulfide (DBDS) GEL/10 10/ DC BS EN A1 Ladders. Terms, types, functional sizes B/ March, / DC BS EN A1 Concrete compactors and smoothing machines. Safety B/513/-/8 18 March, / DC BS ISO Cranes. Access, guards and restraints. Jib cranes MHE/3/3 1 April, / DC BS EN ISO Packaging. Transport packaging for dangerous goods. Test methods PKW/0/4 11 March, / DC BS EN 636 Plywood. Specifications B/541 10/ DC BS EN A1 Ventilation for buildings. Air handling units. Rating and performance for units, components and sections RHE/2 31 January, / DC BS EN ISO Agricultural and forestry machinery. Sprayers and liquid fertilizer distributors. Environmental protection. General AGE/15 10/ DC BS EN ISO Agricultural and forestry machinery. Sprayers and liquid fertilizer distributors. Environmental protection. Horizontal-boom and similar sprayers AGE/15 10/ DC BS EN ISO Agricultural and forestry machinery. Sprayers and liquid fertilizer distributors. Environmental protection. Sprayers for bush, tree and similar crops AGE/15 10/ DC BS ISO Continuous hot-dip metalliccoated steel sheet for corrugated steel pipe ISE/109 10/ DC BS EN Mechanical structures for electronic equipment. Tests for IEC and IEC Combination of performance levels for modular cabinets EPL/48 20 January, / DC BS EN Mechanical structures for electronic equipment. Thermal management. Cooling performance tests for water supplied heat exchangers in electronic cabinets EPL/48 31 January, / DC BS EN ISO Thermal performance of curtain walling. Calculation of thermal transmittance B/540 10/ DC BS EN Doors. Operating forces. Requirements and classification B/538/2 10/ DC BS EN 325 Wood-based panels. Determination of dimensions of test pieces B/541 10/ DC BS EN Laboratory measurement of walking noise on floors EH/1/6 21 February, / DC BS EN Safety of industrial trucks. Verification of dynamic stability. Counterbalanced trucks MHE/7 10/ DC BS EN Foodstuffs. Determination of Lipophilic Algal Toxins (DSP-Toxins, Yessotoxins, Azaspiracids, Pectenotoxins) in shellfish and shellfish products by LC-MS/MS AW/-/3 10/ DC BS EN Railway applications. Braking. Functional and performance criteria of electromagnetic track brake systems for use in railway rolling stock RAE/4 10/ DC BS EN A1 Admixtures for concrete, mortar and grout. Concrete admixtures. Definitions, requirements, conformity, marking and labelling B/517/3 10/ DC BS EN Admixtures for concrete, mortar and grout. Test methods. Determination of the conventional dry material content B/517/3 10/ DC BS EN Sports mats. Gymnastic mats, safety requirements SW/136/22 22 February, / DC BS EN A1 Eurocode 9. Design of aluminium structures. Structures susceptible to fatigue B/525/9 54 Prices may be subject to change. Update Standards Jan 2011

55 10/ DC BS ISO Plastics pipes and fittings. Equipment for fusion jointing polyethylene systems. Butt fusion PRI/88/2 19 February, / DC BS EN A2 Unfired pressure vessels. Materials PVE/1 10/ DC BS EN A1 Unfired pressure vessels. Materials PVE/1 10/ DC BS EN 1976 Copper and copper alloys. Cast unwrought copper products NFE/34 4 April, / DC BS EN Animal feeding stuffs. Determination of calcium, sodium, phosphorus, magnesium, potassium, sulphur, iron, zinc, copper, manganese and cobalt after pressure digestion by ICP-AES AW/10 10/ DC BS EN A1 Household and similar electrical appliances. Safety. General requirements CPL/61 10/ DC BS EN Alarm systems. CCTV surveillance systems for use in security applications. IP Video Transmission Protocols members, non-members GW/1/10 4 March, / DC BS ISO 4731 Oil of geranium (Pelargonium x ssp.) AW/54 10/ DC BS EN A1 Low-voltage electrical installations. Requirements for special installations or locations. Marinas and similar locations JPEL/64 10/ DC BS EN Optical fibres. Measurement methods and test procedures. Chromatic dispersion GEL/86/1 31 January, / DC BS EN Fibre optic interconnecting devices and passive components. Performance standard. Non-connectorised single-mode 1xN and 2xN nonwavelength-selective branching devices for Category O. Uncontrolled environment GEL/86/2 15 January, / DC BS EN Rotating electrical machines. Test methods for determining quantities of equivalent circuit diagrams for three-phase lowvoltage cage induction motors PEL/2 7 January, / DC BS ISO Quality management. Customer satisfaction. Guidelines for monitoring and measuring QS/1 1 April, / DC BS ISO Digital cinema (D-cinema) distribution master. Additional frame rates CPW/36 10/ DC BS ISO Digital cinema (D-cinema) distribution master. Serial digital interface signal formatting for additional frame rates level AFR2 and level AFR4 CPW/36 10/ DC BS ISO Digital cinema (D-cinema) packaging. Operational constraints for additional frame rates CPW/36 10/ DC BS EN Fuel cell technologies. Stationary fuel cell power systems. Safety GEL/ March, / DC BS EN Rotating electrical machines. Qualification and quality control tests for partial discharge free (Type I) electrical insulation systems used in rotating electrical machines fed from voltage converters PEL/2 21 January, / DC BS EN A1 Vacuum cleaner for household use. Dry vacuum cleaners. Methods for measuring the performance CPL/59/6 10/ DC BS EN A1 Industrial communication networks. High availability automation networks. General concepts and calculation methods AMT/7 10/ DC BS EN A1 Industrial communication networks. High availability automation networks. Cross-network Redundancy Protocol (CRP) AMT/7 10/ DC BS EN A1 Industrial communication networks. High availability automation networks. Parallel Redundancy Protocol (PRP) and High availability Seamless Redundancy (HSR) AMT/7 10/ DC BS EN A1 Low-voltage fuses. Supplementary requirements for fuse-links for the protection of semiconductor devices PEL/32 10/ DC BS EN Transitions, pulses and related waveforms. Terms, definitions and algorithms PEL/85 4 January, / DC BS EN Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces. Type LF3 connector family GEL/86/2 20 January, / DC BS EN Fibre optic interconnecting devices and passive components. Fibre optic connector optical interfaces. Optical interface, 2,5 mm and 1,25 mm diameter cylindrical PC ferrule for reference connector, single mode fibre GEL/86/2 20 January, / DC BS EN Fibre optic interconnecting devices and passive components. Fibre optic connector optical interfaces. Optical interface, 2,5 mm and 1,25 mm diameter cylindrical APC ferrule for reference connector, single mode fibre GEL/86/2 20 January, 2011 Update Standards Jan 2011 Prices may be subject to change. 55

56 Draft British Standards for Public Comment continued... 10/ DC BS EN Measuring relays and protection equipment. Common format for transient data exchange (COMTRADE) for power systems PEL/95 1 February, / DC BS EN Household and similar electrical appliances. Safety. Particular requirements for electric irons CPL/61/7 10/ DC BS EN Household and similar electrical appliances. Safety. Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances CPL/61/7 10/ DC BS EN A1 Household and similar electrical appliances. Safety. Particular requirements for washing machines CPL/61/14 10/ DC BS EN A2 Household and similar electrical appliances. Safety. Particular requirements for appliances for skin or hair care CPL/61/1 10/ DC BS EN A2 Household and similar electrical appliances. Safety. Particular requirements for ironers CPL/61/7 10/ DC BS EN A2 Household and similar electrical appliances. Safety. Particular requirements for portable electric heating tools and similar appliances CPL/61/7 10/ DC BS EN A2 Household and similar electrical appliances. Safety. Particular requirements for stationary circulation pumps for heating and service water installations CPL/61/1 10/ DC BS EN A2 Household and similar electrical appliances. Safety. Particular requirements for water bed heaters CPL/61/7 10/ DC BS EN A2 Household and similar electrical appliances. Safety. Particular requirements for foot warmers and heating mats CPL/61/7 10/ DC BS EN Household and similar electrical appliances. Safety. Particular requirements for drives for vertically moving garage doors for residential use CPL/61/1 10/ DC BS EN A2 Household and similar electrical appliances. Safety. Particular requirements for food waste disposers CPL/61/1 10/ DC BS EN Methods for product accelerated testing DS/1 31 March, / DC BS EN Electromagnetic compatibility (EMC). Generic standards. Immunity requirements for safety-related systems and equipment intended to perform functions in a safety-related system (functional safety) in industrial environments GEL/210 10/ DC DD IEC/PAS Fuel cell technologies. Micro fuel cell power systems. Safety. Water reactive (UN Devision 4.3) compounds in indirect PEM fuel cells GEL/105 7 January, / DC BS EN F66 Mechanical standardization of semiconductor devices. Dimensions EPL/47 15 January, / DC BS EN F67 Mechanical standardization of semiconductor devices. Dimensions EPL/47 15 January, / DC BS EN F68 Mechanical standardization of semiconductor devices. Dimensions EPL/47 15 January, / DC BS EN F69 Mechanical standardization of semiconductor devices. Dimensions EPL/47 15 January, / DC BS EN ISO Energy performance of lifts, escalators and moving walks. Energy measurement and conformance MHE/4 10/ DC BS EN Mechanical structures for electronic equipment-modular order for the development of mechanical structures for electronic equipment practices. Cabinet interface dimensions for miscellaneous equipment EPL/48 20 January, / DC BS EN Aerospace series. Connectors, coaxial, radio frequency. Type 2, TNC interface. Clamp nut assembly version. Straight plug. Product standard ACE/6 10/ DC BS EN Aerospace series. Connectors, electrical, rectangular, with sealed and nonsealed rear, plastic housing, locking device, operating temperatures. 55 C to 175 C. Cable clamp. Product standard ACE/6 10/ DC BS EN Aerospace series. Connectors, electrical, circular, bayonet coupling, operating temperature 175 C or 200 C continuous. Receptacle, jam-nut mounting. Product standard ACE/6 10/ DC BS EN Aerospace series. Connectors, electrical, circular, bayonet coupling, operating temperature 175 C or 200 C continuous. Receptacle, hermetic, jam-nut mounting. Product standard ACE/6 10/ DC BS EN Aerospace series. Sealing sleeves used. In elements of connection. Sealing sleeves for external diameter. Cable 3 mm to 4,1 mm. Product standard ACE/6 10/ DC BS EN Aerospace series. Sealing sleeves used in elements of connection. Sealing sleeves for quadrax contacts EN and EN Product standard ACE/6 10/ DC BS EN Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Cable outlet, style A, straight, unsealed, with cable tie strain relief. Product standard ACE/6 56 Prices may be subject to change. Update Standards Jan 2011

New standard Image courtesy of Megger BS EN 61010-1:2010 Safety requirements for electrical equipment for measurement, control, and laboratory use.

57 New standard Image courtesy of Megger BS EN :2010 Safety requirements for electrical equipment for measurement, control, and laboratory use. General requirements BS EN is intended for use by anyone in the industrial, scientific and medical (ISM) industry who sells or manufactures or supplies measurement, control and laboratory equipment or related components and assemblies. BS EN Part 1 has been revised. It replaces BS EN :2001. This revised edition provides a presumption of conformity with the Low Voltage Directive (LVD) and is also essential for compliance with Health and Safety at Work etc Act This standard aims to ensure the safety of anyone that uses this type of electrical equipment for measurement, control, and laboratory use. It provides the general requirements and identifies the risks users and operator could face, and the manufacturer s design requirements and tests needed to reduce these risks. Significant changes to BS EN include: It now applies to the equipment and their accessories wherever they are used, not just for professional use as previously. There is also clarification that equipment used to check people or materials during transportation is within scope. Foreseeable misuse and ergonomic aspects, and a new clause addresses risk assessment for hazards not covered in the standard. Electrical requirements for solid insulation and thin-film insulation. Insulation requirements for mains circuits of overvoltage category II to IV up to 1 kv, for secondary mains circuits up to 63 kv and other circuits up to 100 kv. Additional requirements for protection against mechanical hazards environments and a section on dealing with risk assessment for hazards not covered by the standard is also included. The standard also covers a large number of products that are outside the scope of the LVD [ V], but are covered by either the General Product Safety Directive or the Health and Safety at Work etc. Act. Compliance with BS EN is an indicator of compliance with good engineering practice. Read more and buy at To buy online visit or contact BSI Customer Services quoting marketing reference code A-U Tel +44 (0) Fax +44 (0) orders@bsigroup.com raising standards worldwide Standards and publications may also be ordered via the BSI shop at *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0) BSI British Standards Institution 2010

58 Draft British Standards for Public Comment continued... 10/ DC BS EN Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Cable outlet, style A, 90, unsealed, with cable tie strain relief. Product standard ACE/6 10/ DC BS EN Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Stainless steel banding band, style Z, for attachment of individual and/or overall screens to cable outlets. Product standard ACE/6 10/ DC BS EN Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Cable outlet, style A, 45, unsealed, with cable tie strain relief. Product standard ACE/6 10/ DC BS EN Aerospace series. Manual installation tool, style Z, for installation of stainless steel shield termination band EN , to cable outlet accessories. Product standard ACE/6 10/ DC BS EN Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, male, type A, crimp, class S. Product standard ACE/6 10/ DC BS EN Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, female, type A, crimp, class S. Product standard ACE/6 10/ DC BS EN Aerospace series. Electrical contacts used in elements of connection. Contacts size 22 for EN 2997, electrical, male, type A, crimp, class S. Product standard ACE/6 10/ DC BS EN Aerospace series. Electrical contacts used in elements of connection. Contacts size 22 for EN 2997, electrical, female, type A, crimp, class S. Product standard ACE/6 10/ DC BS EN Aerospace series. Electrical contacts used in elements of connection. Contacts size 22 for EN 2997, electrical, male, type A, crimp, class T. Product standard ACE/6 10/ DC BS EN Aerospace series. Electrical contacts used in elements of connection. Contacts size 22 for EN 2997, electrical, female, type A, crimp, class T. Product standard ACE/6 10/ DC BS EN Aerospace series Metallic materials. Designation ACE/61 10/ DC BS EN 4720 Aerospace series. Steel FE-PM 3504 (X4CrNiMo16-5-1). Air melted and electroslag remelted (ESR). Hardened and tempered. Bar. De µ 200 mm MPa µ Rm µ 1300 MPa ACE/61/-/15 10/ DC BS EN 4721 Aerospace series. Steel FE-PM 3504 (X4CrNiMo16-5-1). Air melted and electroslag remelted (ESR). Hardened and tempered. Bar. De µ 200 mm. 900 MPa µ Rm µ 1050 MPa ACE/61/-/15 10/ DC BS EN Aerospace series. Metallic materials. Rules for drafting and presentation of material standards. General rules ACE/61 10/ DC BS EN Aerospace series. Metallic materials. Rules for drafting and presentation of material standards. Specific rules for heat resisting alloys ACE/61 10/ DC BS EN Aerospace series. Metallic materials. Rules for drafting and presentation of material standards. Specific rules for steels ACE/61 10/ DC BS EN 2512 Aerospace series. Aluminium alloy AL-P7175-Al Zn5,5MgCu(B)-T7351. Plate 6 mm < a µ 100 mm ACE/61 10/ DC BS EN 4293 Aerospace series. Aluminium alloy AL-P7175-Al Zn5,5MgCu(B)-T Extruded bar and section a or D µ 150 mm ACE/61 10/ DC BS EN Aerospace series. Metallic materials. Rules for drafting and presentation of material standards. Specific rules for titanium and titanium alloys ACE/61 DOCUMENTS NOT ISSUED AS DPCs Comments can be sent by or by post to named contacts at: BSI Head Office 389 Chiswick High Road London W4 4AL Tel: IEC VHDL Language Reference Manual (IEEE 1076) IEC System verilog. Unified hardware design, specification, and verification language (IEEE 1800) The above IEC standards have been issued under the fast track procedure and as a result a Draft for Public Comment could not be issued. The documents are available on request from the contact point (below). Contact: Committee Service Centre csc@bsigroup.com GEL/93 ISO Road vehicles. Heavy commercial vehicles and buses. Lateral transient response test methods ISO Heavy commercial vehicles and buses. Braking in a turn. Open-loop test methods ISO Heavy commercial vehicles and buses. Steadystate rollover threshold. Tilt-table test method These draft standards have been circulated for ISO Final Draft International Standard ballot, which are due to close on 12 January, Copies of the draft texts are available from the contact point (below) under document references AUE/15_10_00082, _0083 & _0084. Contact: Committee Service Centre csc@bsigroup.com AUE/15 pren ISO (ISO 14174:2010) Welding consumables. Fluxes for submerged arc welding and electroslag welding. Classification This standard has been circulated as DIS in ISO for the second time and the first as pren ISO under the Vienna Agreement. The draft is available from the Programme Manager (below). Voting terminates on 21 January, Contact: Sarah Meagher sarah.meagher@bsigroup.com WEE/39 pren 2535 Aerospace series. Vacuum deposition of cadmium 58 Prices may be subject to change. Update Standards Jan 2011

59 pren 2757 Aerospace series. Structural adhesives system. Test method. Determination of the drying and ignition residues of primers These standards have been circulated at Formal Vote stage. The full text is available on request from the contact point (below). Contact: Committee Service Centre ACE/65 pren 2824 Aerospace series. Burning behaviour of nonmetallic materials under the influence of radiating heat and flames. Determination of smoke density and gas components in the smoke of materials. Test equipment apparatus and media pren Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures. 65 C to 175 C continuous, 200 C continuous, 260 C peak. Square flange receptacle. Product standard pren Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures. 65 C to 175 C continuous, 200 C continuous, 260 C peak. Hermetic square flange receptacle. Product standard These standards have been circulated at enquiry stage without DPC s. The text is available on request from the contact point (below). Contact: Committee Service Centre csc@bsigroup.com ACE/6 pren 4593 Aerospace series. Paints and varnishes. Determination of solar absorptance pren 4594 Aerospace series. Paints and varnishes. Two component cold curing polyurethane finish. Supersonic erosion resistance pren 4595 Aerospace series. Paints and varnishes. Two component cold curing polyurethane finish. Subsonic erosion resistance These standards are being circulated at Formal Vote stage. The text is available on request from the contact point (below). Contact: Committee Service Centre csc@bsigroup.com ACE/65 View BSI s conferences at Conferences CEN EUROPEAN STANDARDS EUROPEAN RATIFIED TEXTS The documents listed below have recently been issued by CEN but have not yet been published as BS ENs. BSI has an obligation to adopt all ENs and to withdraw any conflicting British Standards (BSs) or parts of BSs. The following will be implemented as BS ENs or as amendments to BS ENs shortly. Notification of their implementation will be given in the BS EN Publications section of the relevant edition of Update Standards. EN :2008+A2:2010 Domestic cooking appliances burning gas. Safety. General GSE/35 EN 893:2010 Mountaineering equipment. Crampons. Safety requirements and test methods SW/136/5 EN 958:2006+A1:2010 Mountaineering equipment. Energy absorbing systems for use in klettersteig (via ferrata) climbing. Safety requirements and test methods SW/136/5 EN : Execution of steel structures and aluminium structures. Requirements for conformity assessment of structural components CORRIGENDUM 1:November 2010 to EN :2009 CB/203 EN : Eurocode 2. Design of concrete structures. General rules and rules for buildings CORRIGENDUM 2:November 2010 to EN :2004 B/525/2 EN :2010 Aerospace series. Cables, optical 125 µm diameter cladding. Semi-loose, ruggedized simplex construction 62,5/125 µm GI fibre nominal 2,74 mm, outside diameter. Product standard ACE/6 EN :2010 Aerospace series. Cables, optical 125 µm diameter cladding. Semi-loose, ruggedized duplex construction 62,5/125 µm GI fibre nominal, 4,95 mm outside diameter. Product standard ACE/6 EN :2010 Aerospace series. Cables, optical 125 µm diameter cladding. Semi-loose, ruggedized quadraxial construction 62,5/125 µm GI fibre nominal, 5,72 mm outside diameter. Product standard ACE/6 EN 10029:2010 Hot-rolled steel plates 3 mm thick or above. Tolerances on dimensions and shape ISE/103 EN 10051:2010 Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels. Tolerances on dimensions and shape ISE/103 EN 13236:2010 Safety requirements for superabrasive products MTE/13 EN 13313:2010 Refrigerating systems and heat pumps. Competence of personnel RHE/18 EN : Metallic industrial piping. Materials AMENDMENT 1:November 2010 to EN :2002 PVE/10 EN : Metallic industrial piping. Materials AMENDMENT 2:November 2010 to EN :2002 PVE/10 EN 14055:2010 WC and urinal flushing cisterns B/503 EN 14116:2007+A2:2010 Tanks for transport of dangerous goods. Digital interface for the product recognition device AUE/18 EN :2010 Railway applications. Braking systems of high speed trains. Requirements and definitions RAE/4 EN :2010 Railway applications. Braking systems of high speed trains. Test methods RAE/4 EN 15998:2010 Glass in building. Safety in case of fire, fire resistance. Glass testing methodology for the purpose of classification B/520/4 Update Standards Jan 2011 Prices may be subject to change. 59

60 CEN European Standards continued... EN 16156:2010 Cigarettes. Assessment of the ignition propensity. Safety requirement FSH/21/15 CEN REPORTS CEN/TR 614-3:2010 Safety of machinery. Ergonomic principles for the design of mobile machinery PH/9 CEN/TR 15990: Data sheets. Footwear tests materials and test adhesives CORRIGENDUM 1:November 2010 to CEN/TR 15990:2010 PRI/52 CENELEC PUBLICATIONS EUROPEAN RATIFIED TEXTS The documents listed below have recently been issued by CENELEC but have not yet been published as BS ENs. BSI has an obligation to adopt all ENs and to withdraw any conflicting British Standards (BSs) or parts of BSs. The following will be implemented as BS ENs or as amendments to BS ENs shortly. Notification of their implementation will be given in the BS EN Publications section of the relevant edition of Update Standards. EN :2010 Lead-acid starter batteries. Properties of battery housings and handles PEL/21 EN 50522:2010 Earthing of power installations exceeding 1 kv A.C. PEL/99 EN :2010 EMC network standard. Wire-line telecommunications network using telephone wires GEL/210/11 EN :2010 EMC network standard. Wire-line telecommunications networks using coaxial cables GEL/210/11 EN 50554:2010 Basic standard for the in-situ assessment of a broadcast site related to general public exposure to radio frequency electromagnetic fields GEL/106 EN 55024:2010 (IEC CISPR 24:2010) Information technology equipment. Immunity characteristics. Limits and methods of measurement GEL/210/11 EN : (IEC :1997+A1:2009) Packaging of winding wires. Methods of test. Delivery spools made from thermoplastic materials AMENDMENT 1:November 2010 to EN :2010 GEL/55 EN : Household and similar electrical appliances. Safety. Particular requirements for grills, toasters and similar portable cooking appliances AMENDMENT 13:November 2010 to EN :2003 CPL/61/7 EN :2010 (IEC :2010) Electric traction. Rotating electrical machines for rail and road vehicles. Machines other than electronic convertor-fed alternating current motors GEL/9/2 EN :2010 (IEC :2010) Measurement of quartz crystal unit parameters. Standard method for the determination of the load resonance frequency fl and the effective load capacitance CLeffusing automatic network analyzer techniques and error correction EPL/49 EN 60445:2010 (IEC 60445:2010) Basic and safety principles for man-machine interface, marking and identification. Identification of equipment terminals, conductor terminations and conductors GEL/16 EN : (IEC :2010) Medical electrical equipment. Particular requirements for the basic safety and essential performance of magnetic resonance equipment for medical diagnosis CORRIGENDUM 1:October 2010 to EN :2010 CH/62/2 EN :2010 (IEC :2008) Automatic electrical controls for household and similar use. Particular requirements for temperature sensing controls CPL/72 EN :2010 (IEC :2010) Electromagnetic compatibility (EMC). Testing and measurement techniques. Emission and immunity testing in transverse electromagnetic (TEM) waveguides GEL/210/12 EN : Safety of transportable motor-operated electric tools. General requirements AMENDMENT 11:November 2010 to EN :2009 CPL/116 EN 61099:2010 (IEC 61099:2010) Specification for unused synthetic organic esters for electrical purposes GEL/10 EN 61210:2010 (IEC 61210:2010) Connecting devices. Flat quick-connect terminations for electrical copper conductors. Safety requirements PEL/23/2 EN :2010 (IEC :2010) Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Thermal shocks GEL/86/2 EN : (IEC :2005/A1:2010) Lamp controlgear. Particular requirements for D.C. or A.C. supplied electronic ballasts for discharge lamps (excluding fluorescent lamps) AMENDMENT 1:November 2010 to EN :2005 CPL/34/3 EN : (IEC :2005/A1:2010) Wind turbines. Design requirements AMENDMENT 1:November 2010 to EN :2005 PEL/88/-/7 EN :2010 (IEC :2010) Superconductivity. AC loss measurements. Total AC loss measurement of round superconducting wires exposed to a transverse alternating magnetic field at liquid helium temperature by a pickup coil method L/-/90 EN :2010 (IEC :2010) Power installations exceeding 1 kv A.C. Common rules PEL/99 60 Prices may be subject to change. Update Standards Jan 2011

British Standards Online (BSOL) Delivering information and raising standards BSOL works for you by delivering information that reduces your costs and improves efficiency.

61 British Standards Online (BSOL) Delivering information and raising standards BSOL works for you by delivering information that reduces your costs and improves efficiency. Used by professionals worldwide, BSOL is the most complete and up to date source of British Standards available. Boost your customers confidence by using the most definitive source of British, adopted European and adopted international standards in the world. BSOL covers a broad range of disciplines for all industry sectors. By subscribing, you can specify the industry groupings that you need. A listing of modules is available at: Delivering tailored information directly to your desktop, this growing resource contains bibliographic details of more than 50,000 publications and allows you to quickly download the full-text of any standard within your subscription. What will you gain by subscribing? Information accessible directly to your desktop. Just browse, search and download the information The most comprehensive British, adopted European and international collection of standards available anywhere in one easy to access portal 24/7 instant unlimited access (subject to terms) Access to draft standards enabling you to help shape your industry s future My notifications alert service ensuring you know when updates have been made to your chosen products Annual subscription for easy budgeting. FREE TRIAL To subscribe and for further information visit: To subscribe online visit or contact BSI Customer Services quoting marketing reference code BSOLA-U Tel +44 (0) Fax +44 (0) orders@bsigroup.com raising standards worldwide Standards and publications may also be ordered via the BSI shop at *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0) BSI British Standards Institution 2010

62 CENELEC Publications continued... EN :2010 (IEC :2010) Semiconductor devices. Time-dependent dielectric breakdown (TDDB) test for intermetal layers EPL/47 EN 62502:2010 (IEC 62502:2010) Analysis techniques for dependability. Event tree analysis (ETA) DS/1 CENELEC TECHNICAL SPECIFICATIONS CLC/TS :2010 (IEC/TS :2008) Electrical resistance trace heating systems for industrial and commercial applications. Application guide for system design, installation and maintenance PEL/27 IEC PUBLICATIONS It is BSI policy to supply the UK version of all adopted standards, which are published as British standards, unless otherwise requested. The following IEC publications are available from BSI Customer Services (see How to order on page 2) IEC :2010 Series capacitors for power systems. Thyristor controlled series capacitors members, non-members PEL/33 IEC : Specifications for particular types of winding wires. Polyester enamelled round copper wire, class 155 AMENDMENT 1:November 2010 to IEC : members, non-members GEL/55 IEC :2010 (Edition 4) Piezoelectric filters of assessed quality. Standard outlines and lead connections members, non-members EPL/49 IEC :2010 (Edition 2) Industrial-process control valves. Control valve data sheet members, non-members GEL/65/2 IEC :2010 (Edition 2) Medical electrical equipment. Particular requirements for the basic safety and essential performance of therapeutic x-ray equipment operating in the range 10 kv to 1MV members, non-members CH/62/3 IEC : Hand-held motor-operated electric tools. Safety. Particular requirements for grinders, polishers and disk-type sanders AMENDMENT 1:November 2010 to IEC : members, non-members CPL/116 IEC :2010 (Edition 3) Transmitters for use in industrial-process control systems. Methods for inspection and routine testing members, non-members GEL/65/2 IEC :2010 Safety of laser products. Safety aspects for use of passive optical components and optical cables in high power optical fibre communication systems members, non-members EPL/76 IEC :2010 (Edition 4) Maritime navigation and radiocommunication equipment and systems. Digital interfaces. Single talker and multiple listeners members, non-members EPL/80 IEC :2010 (Edition 2) Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Sealing for non-pressurized closures of fibre optic devices members, non-members GEL/86/2 IEC 61803: Determination of power losses in high-voltage direct current (HVDC) converter stations with line-commutated converters AMENDMENT 1:November 2010 to IEC 61803: members, non-members PEL/22 IEC :2010 (Edition 2) Electric vehicle conductive charging system. General requirements members, non-members PEL/69 IEC 62115: Electric toys. Safety AMENDMENT 2:November 2010 to IEC 62115: members, non-members CPL/61/21 IEC :2010 (Edition 2) Fibre optic active components and devices. Package and interface standards. SFF 20-pin transceivers members, non-members GEL/86/3 IEC :2010 (Edition 2) Maritime navigation and radiocommunication equipment and systems. Class B shipborne equipment of the automatic identification system (AIS). Carrier-sense time division multiple access (CSTDMA) techniques members, non-members EPL/80 IEC :2010 Industrial communication networks. Network and system security. Establishing an industrial automation and control system security program members, non-members GEL/65 IEC :2010 Magnetic resonance equipment for medical imaging. Classification criteria for pulse sequences members, non-members CH/62/2 IEC :2010 Identification systems enabling unambiguous information interchange. Requirements. Principles and methods members, non-members GEL/3 ISO PUBLICATIONS It is BSI policy to supply the UK version of all adopted standards, which are published as British standards, unless otherwise requested. The following ISO publications are available from BSI Customer Services (see How to order on page 2) ISO 520:2010 (Edition 2) Cereals and pulses. Determination of the mass of 1000 grains members, non-members AW/4 62 Prices may be subject to change. Update Standards Jan 2011

New book Making Events More Sustainable: A Guide to BS 8901 Phil Cumming and Fiona Pelham This book is the guide to implementing BS 8901, Specification for a sustainability management system for

However, with the right framework in place you can control and influence your resource use and make changes to your business practices to reduce your negative impacts and capitalize on positive ones.

For those at the beginning of their BS 8901 journey there are tips on where to start, while for those with a management system already in place, there are suggestions for the next steps.

user-friendly guide. http://shop.bsigroup.com/bip2176 To buy please visit http://shop.bsigroup.com/bip2176 or contact BSI Customer Services quoting marketing reference 2176A-U Tel+44 (0)20 8996 9001 Fax +44 (0)20 8996 7001 Email orders@bsigroup.

63 New book Making Events More Sustainable: A Guide to BS 8901 Phil Cumming and Fiona Pelham This book is the guide to implementing BS 8901, Specification for a sustainability management system for events, the internationally renowned framework that helps the event industry to implement more sustainable ways of working. It could be said that staging an event is inherently un-sustainable. However, with the right framework in place you can control and influence your resource use and make changes to your business practices to reduce your negative impacts and capitalize on positive ones. This guide explains all of the requirements of BS 8901 and gives advice on complying with the standard, illustrating best practice approaches through extensive case studies, examples and templates. For those at the beginning of their BS 8901 journey there are tips on where to start, while for those with a management system already in place, there are suggestions for the next steps. Whether you are working in event management or supplying to the events industry, you can enhance your understanding of BS 8901 and improve your performance against its requirements with this user-friendly guide. To buy please visit or contact BSI Customer Services quoting marketing reference 2176A-U Tel+44 (0) Fax +44 (0) orders@bsigroup.com Standards and publications may also be ordered via the BSI shop at *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0) BSI British Standards Institution 2010 New book Cloud Computing. A Practical Introduction to the Legal Issues Renzo Marchini Are you new to cloud computing and find the legal aspects daunting? If you need an introduction to bring you up to speed with this concept, then this is the book for you, whether you are from a legal background or not. It can help you maximise the advantages and minimise the disadvantages of cloud computing. Read it to get a practical overview on both providing and buying cloud services, and how they differ from other ways of buying computing resources. How will this book help with cloud computing issues? It summarises the key cloud-specific legal issues as well as more general issues, so you can maximize business advantage, and anticipate and reduce exposure to risk Provides practical steps for addressing contractual issues between customer and suppliers, as well as considering the regulatory context Includes guidance on standards such as ISO 27001, to give you a standardsbased context for this topic Economic and environmental benefits are explained so your business can make savings and improve efficiency Each chapter contains Practical Tips to implement and Key Points to aid learning. The book also covers security in the cloud, data protection, data transfers, software licensing, service levels, liability and contractual issues. A section covers issues that regulated sectors, such as financial services may face when the cloud service is used. To buy please visit or contact BSI Customer Services quoting marketing reference 0117A-U Tel+44 (0) Fax +44 (0) orders@bsigroup.com Standards and publications may also be ordered via the BSI shop at *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0) BSI British Standards Institution 2010

64 ISO Publications continued... ISO :2010 (Edition 3) Hydrometry. Measurement of liquid flow in open channels. Determination of the stagedischarge relationship members, non-members CPI/113/1 Will not be implemented as a British Standard ISO :2010 (Edition 6) Motorcycle tyres and rims (code-designated series). Rims members, non-members AUE/4 ISO/IEC :2010 (Edition 2) Information technology. Security techniques. Entity authentication. Mechanisms using manual data transfer members, non-members IST/33 ISO :2010 (Edition 3) Plastics. Polyamide (PA) moulding and extrusion materials. Designation system and basis for specification members, non-members PRI/82 ISO : Plastics. Polyamide (PA) moulding and extrusion materials. Preparation of test specimens and determination of properties AMENDMENT 1:November 2010 to ISO : members, 9.64 non-members PRI/82 ISO 2425:2010 (Edition 3) Hydrometry. Measurement of liquid flow in open channels under tidal conditions members, non-members CPI/113/1 ISO :2010 Paper and board. Determination of bending resistance. Constant rate of deflection members, non-members PAI/11 ISO 3746:2010 (Edition 3) Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound pressure. Survey method using an enveloping measurement surface over a reflecting plane members, non-members EH/1/4 ISO 3747:2010 (Edition 3) Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound pressure. Engineering/survey methods for use in situ in a reverberant environment members, non-members EH/1/4 ISO 4534:2010 (Edition 2) Vitreous and porcelain enamels. Determination of fluidity behaviour. Fusion flow test members, non-members STI/36 ISO 4611:2010 (Edition 4) Plastics. Determination of the effects of exposure to damp heat, water spray and salt mist members, non-members PRI/21 ISO 4619:1998 (Edition 2) Driers for paints and varnishes members, non-members ISO 6731:2010 (Edition 2) Milk, cream and evaporated milk. Determination of total solids content (reference method) members, non-members AW/5 ISO 6734:2010 (Edition 2) Sweetened condensed milk. Determination of total solids content (reference method) members, non-members AW/5 ISO :2010 (Edition 2) Reciprocating internal combustion engines. Vocabulary of components and systems. Main running gear members, non-members MCE/14/-/5 ISO :2010 Ergonomics of human-system interaction. Guidance on software individualization members, non-members PH/9 ISO : Industrial automation systems and integration. Product data representation and exchange Integrated generic resource. Fundamentals of product description and support CORRIGENDUM 2:December 2010 to ISO :2005 AMT/4 Will not be implemented as a British Standard. Is approved as suitable for use in the UK ISO : Industrial automation systems and integration. Product data representation and exchange. Integrated application resource. Kinematic and geometric constraints for assembly models CORRIGENDUM 1:December 2010 to ISO :2004 AMT/4 Will not be implemented as a British Standard. Is approved as suitable for use in the UK ISO/TS :2010 (Edition 2) Industrial automation systems and integration. Product data representation and exchange. Application module. Functional decomposition to design AMT/4 Will not be implemented as a British Standard. Is approved as suitable for use in the UK ISO/TS :2010 (Edition 2) Industrial automation systems and integration. Product data representation and exchange. Application module. Shape parameters AMT/4 Will not be implemented as a British Standard. Is approved as suitable for use in the UK ISO/TS :2010 Industrial automation systems and integration. Product data representation and exchange. Guidance on the usage of ISO for gear units members, non-members AMT/4 Will not be implemented as a British Standard. Is approved as suitable for use in the UK ISO 10352:2010 (Edition 3) Fibre-reinforced plastics. Moulding compounds and prepregs. Determination of mass per unit area members, non-members PRI/42 64 Prices may be subject to change. Update Standards Jan 2011

65 ISO 10717:2010 Footwear. Test method for slide fasteners. Burst strength members, non-members ISO 10810:2010 Surface chemical analysis. X-ray photoelectron spectroscopy. Guidelines for analysis members, non-members CII/60 ISO 10869:2010 Oil of Fir needle, Siberian (Abies sibirica Ledeb.) members, non-members AW/54 ISO 11337:2010 (Edition 2) Plastics. Polyamides. Determination of Gecaprolactam and Gw-laurolactam by gas chromatography members, non-members PRI/21 ISO/IEC :2010 (Edition 2) Information technology. Security techniques. Key management. Framework members, non-members IST/33 ISO 12021:2010 Road vehicles. Sensitivity to lateral wind. Openloop test method using wind generator input members, non-members AUE/15 ISO 12384:2010 Aerospace. Requirements for digital equipment for measurements of aircraft electrical power characteristics members, non-members ACE/6 ISO 12690:2010 Metallic and other inorganic coatings. Thermal spray coordination. Tasks and responsibilities members, non-members STI/33 ISO/TR 12802:2010 Nanotechnologies. Model taxonomic framework for use in developing vocabularies. Core concepts members, non-members NTI/1 ISO/TR 13028:2010 Information and documentation. Implementation guidelines for digitization of records members, non-members IDT/2/17 ISO/IEC :2010 Information technology. Topic maps. Compact syntax members, non-members IST/41 ISO : Industrial fans. Determination of fan sound power levels under standardized laboratory conditions. General overview AMENDMENT 1:November 2010 to ISO : members, 9.64 non-members MCE/17 ISO : Industrial fans. Determination of fan sound power levels under standardized laboratory conditions. Enveloping surface methods AMENDMENT 1:November 2010 to ISO : members, 9.64 non-members MCE/17 ISO 13678:2010 (Edition 3) Petroleum and natural gas industries. Evaluation and testing of thread compounds for use with casing, tubing, line pipe and drill stem elements members, non-members PSE/17/-/5 ISO/TR 14521:2010 Gears. Calculation of load capacity of wormgears members, non-members MCE/5 ISO :2010 (Edition 2) Plastics pipes and fittings. Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels. Metric series. Specifications. Fittings for mechanical jointing (including PE-X/metal transitions) members, non-members PRI/88/2 ISO/IEC :2010 Information technology. Home Electronic Systems (HES) Architecture. Intelligent grouping and resource sharing for HES Class 2 & Class 3. Device validation members, non-members IST/6 Will not be implemented as a British Standard ISO 15064:2010 (Edition 2) Plastics. Aromatic isocyanates for use in the production of polyurethanes. Determination of the isomer ratio in toluenediisocyanate members, non-members PRI/42 ISO :2010 (Edition 2) Image technology colour management. Architecture, profile format and data structure. Based on ICC.1: members, non-members PAI/43 ISO 15192:2010 Soil quality. Determination of chromium (VI) in solid material by alkaline digestion and ion chromatography with spectrophotometric detection members, non-members EH/4 Will not be implemented as a British Standard ISO 15234:1999 Paints and varnishes. Testing of formaldehydeemitting coatings and melamine foams. Determination of the steady-state concentration of formaldehyde in a small test chamber members, non-members Will not be implemented as a British Standard ISO 16163:2010 (Edition 3) Continuously hot-dipped coated steel sheet products. Dimensional and shape tolerances members, non-members ISE/109 ISO :2010 Information and documentation. Principles and functional requirements for records in electronic office environments. Overview and statement of principles members, non-members IDT/2/17 Will not be implemented as a British Standard Update Standards Jan 2011 Prices may be subject to change. 65

66 ISO Publications continued... ISO :2010 Information and documentation. Principles and functional requirements for records in electronic office environments. Guidelines and functional requirements for records in business systems members, non-members IDT/2/17 Will not be implemented as a British Standard ISO/TS 16878:2010 Direct reduced iron and hot briquetted iron. Determination of metallic iron. Iron (III) chloride titrimetric method members, non-members ISE/58 ISO 17736:2010 Workplace air quality. Determination of isocyanate in air using a double-filter sampling device and analysis by high pressure liquid chromatography members, non-members EH/2/2 ISO/IEC :2010 (Edition 2) Information technology. Radio frequency identification for item management. Parameters for air interface communications at 860 MHz to 960 MHz members, non-members IST/34 ISO/IEC TR :2010 Information technology. Service management. Process reference model members, non-members IST/15/-/8 ISO 20349:2010 Personal protective equipment. Footwear protecting against thermal risks and molten metal splashes as found in foundries and welding. Requirements and test method members, non-members PH/1 ISO 23339:2010 Space systems. Unmanned spacecraft. Estimating the mass of remaining usable propellant members, non-members ACE/68/-/3 ISO 23873:2010 Hard coal. Method for the measurement of the swelling of hard coal using a dilatometer members, non-members PTI/16 ISO 24102:2010 Intelligent transport systems. Communications access for land mobiles (CALM). CALM management members, non-members EPL/278 ISO :2010 Ships and marine technology. Design, location and use of shipboard safety signs, safety-related signs, safety notices and safety markings. Design principles members, non-members SME/32/-/1 ISO 24444:2010 Cosmetics. Sun protection test methods. In vivo determination of the sun protection factor (SPF) members, non-members CW/217 ISO/IEC TR :2010 Information technology. Programming languages, their environments and system software interfaces. Extensions to the C library. Dynamic allocation functions members, non-members IST/5 Will not be implemented as a British Standard ISO 28401:2010 Light metals and their alloys. Titanium and titanium alloys. Classification and terminology members, non-members NFE/35 Will not be implemented as a British Standard ISO 28460:2010 Petroleum and natural gas industries. Installation and equipment for liquefied natural gas. Ship-to-shore interface and port operations members, non-members PSE/17/-/7 ISO 28762:2010 (Edition 2) Vitreous and porcelain enamels. Enamel coatings applied to steel for writing surfaces. Specification members, non-members STI/36 ISO 29473:2010 Fire tests. Uncertainty of measurements in fire tests members, non-members FSH/21 ISO 29941:2010 Condoms. Determination of nitrosamines migrating from natural rubber latex condoms members, non-members CH/157 ISO 30007:2010 Ships and marine technology. Measures to prevent asbestos emission and exposure during ship recycling members, non-members SME/32 ISO 21667:2010 Health informatics. Health indicators conceptual framework members, non-members IST/35 ISO/TR :2010 Medical devices utilizing animal tissues and their derivatives. Principles for elimination and/or inactivation of transmissible spongiform encephalopathy (TSE) agents and validation assays for those processes members, non-members CH/194 ISO/IEC :2010 Information technology. JPSearch. File format for metadata embedded in image data (JPEG and JPEG 2000) members, non-members IST/37 Will not be implemented as a British Standard ISO/TS 25138:2010 Surface chemical analysis. Analysis of metal oxide films by glow-discharge optical-emission spectrometry members, non-members CII/60 Are you signed up for BSI newsletters? Sign up for BSI s sector-specific newsletter updates for news, new publications and developments Prices may be subject to change. Update Standards Jan 2011

New Edition Now Available IPC A 610:2010 - Revision E Acceptability of electronic assemblies IPC-A-610 is recognized by the IEC as the globally preferred international acceptance standard for

This standard is a collection of visual quality acceptability requirements for electronic assemblies.

67 New Edition Now Available IPC A 610: Revision E Acceptability of electronic assemblies IPC-A-610 is recognized by the IEC as the globally preferred international acceptance standard for electronics assembly. It is already the most widely used electronics assembly standard in the world. This standard is a collection of visual quality acceptability requirements for electronic assemblies. A must for all quality assurance and assembly departments, IPC-A-610E illustrates industry-accepted workmanship criteria for electronics assemblies through full-color photographs and illustrations. An essential standard for electronics assembly: Inspectors Operators Trainers Now contains 809 photos and illustrations of acceptability criteria. The revision has been critically reviewed for clarity and accuracy. This document should be used in conjunction with IPC-HDBK-001, IPC-HDBK-610 and IPC j-std-001. Price: Members and Distributors Non-Members Shipping charges will apply to both members and non-members. Free trial available To read more and buy, please contact: +44 (0) worldwide.standards@bsigroup.com +44 (0) To order please worldwide.standards@bsigroup.com. For quotes and queries please or call Worldwide Standards quoting marketing reference IPCA-U Tel +44 (0) Fax +44 (0) world.standards@bsigroup.com BSI Knowledge Centre Your standards resource BSI Knowledge Centre provides the following services to BSI Members: Enquiry Line information on the status, availability, scope and coverage of standards detailed database searches across current and withdrawn standards response within 1 working day Loan service borrow a wide selection of international and foreign standards Information Resources consult databases, journals and standards in our member study area. Contact us to arrange a visit Withdrawn Standards a comprehensive collection of withdrawn British Standards available to view and purchase in PDF and hardcopy For more information contact the BSI Knowledge Centre: Tel +44 (0) Fax +44 (0) knowledgecentre@bsigroup.com raising standards worldwide

68 New Standard BS 8878:2010 Web accessibility. Code of practice BS 8878 has been designed to introduce non-technical professionals to accessibility, usability and user experience for disabled and older people. It will be especially beneficial to anyone new to this subject as it gives guidance on process, rather than on technical and design issues. BS 8878 is also cited in the Department for Business s new e-accessibility Action Plan and is the basis for updated government advice on making websites more accessible. Both the public and private sector can benefit from this new standard. There are three main reasons for organizations and businesses to take steps to make their web products more accessible and usable: Commercial reasons as this standard will allow site owners to reach a wider audience for their products and services, opening up new markets and opportunities Ethical reasons as it will help ensure that disabled and older people are not excluded from the benefits of the digital age, and are able to use new technologies to increase their ability to live independently, and to be fully engaged members of society Legal reasons as many web products unwittingly and unlawfully exclude disabled and older people; yet in most cases the barriers these web products present can be removed. BS 8878 provides guidance on how to remove the barriers to inclusion and highlights a simple truth: if accessibility is built-in, it s a win - win for site owners and users. Read more and buy at To buy online visit or contact BSI Customer Services quoting marketing reference code BS8878A-U Tel +44 (0) Fax +44 (0) orders@bsigroup.com raising standards worldwide Standards and publications may also be ordered via the BSI shop at *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0) BSI British Standards Institution 2010

STANDARDS September UPDATE. Coming soon. Eurocodes Plus* Eurocodes made simple Contents

STANDARDS September UPDATE. Coming soon. Eurocodes Plus* Eurocodes made simple Contents UPDATE STANDARDS September Online version http://shop.bsigroup.com/ UpdateStandardsOnline 2011 Contents Coming soon Redhayes bridge Designed to Eurocodes by Parsons Brinckerhoff on behalf of Devon County