Railway applications. Communication, signalling and processing systems. European rail traffic management system. Driver-machine interface GEL/9/1

Transcription

1 DRAFTS FOR DEVELOPMENT DD CEN/TS 15224:2005 Health services Quality management systems Guide for the use of EN ISO 9001:2000 no current standard is superseded ISBN members, DD CEN/TS 15279:2006 Workplace exposure Measurement of dermal exposure Principles and methods no current standard is superseded ISBN members, 9800 DD CEN/TS 15289:2006 Solid biofuels Determination of total content of sulphur and chlorine no current standard is superseded ISBN members, 3400 DD CEN/TS 15290:2006 Solid biofuels Determination of major elements no current standard is superseded ISBN members, 3400 DD CEN/TS 15296:2006 Solid biofuels Calculation of analyses to different bases no current standard is superseded ISBN members, 2600 DD CEN/TS 15297:2006 Solid biofuels Determination of minor elements no current standard is superseded ISBN members, 2600 SPECIAL ANNOUNCEMENTS CH/100/-/2 EH/2/2 PTI/17 PTI/17 PTI/17 PTI/17 DD CLC/TS 50459:- Railway applications Communication, signalling and processing systems European rail traffic management system Driver-machine interface DD CLC/TS :2005 Ergonomic principles for the presentation of ERTMS/ETCS/GSM-R information no current standard is superseded ISBN X 2800 members, 5600 DD CLC/TS :2005 Ergonomic arrangements of ERTMS/ETCS information no current standard is superseded ISBN members, DD CLC/TS :2005 Ergonomic arrangements of ERTMS/GSM-R information no current standard is superseded ISBN members, DD CLC/TS :2005 Data entry for the ERTMS/ETCS/GSM-R systems no current standard is superseded ISBN members, 5600 DD CLC/TS :2005 Symbols no current standard is superseded ISBN members, 5600 DD CLC/TS :2005 Audible information no current standard is superseded ISBN members, 6800 GEL/9/1 GEL/9/1 GEL/9/1 GEL/9/1 GEL/9/1 GEL/9/1 GEL/9/1 SPECIAL ANNOUNCEMENTS DD 254:2001 Crime reduction measures for holiday resorts and accommodation Guidance and recommendations DD 254 was published in November 2001 by the now-defunct Sector Board W/-, in conjunction with a service provider and a tour operator Comments are invited on whether it can now be converted from a Draft for Development into a British Standard Interested parties are also asked to declare their interest in the further development of the Draft A parallel investigation is being made by BSI as to which committee should be responsible for any further work Please send any comments to the Programme Manager (below) Contact: John Fisher johnfisher@bsi-globalcom BS EN 1337:- Structural bearings BS EN :2004 Spherical and cylindrical PTFE bearings This standard, which will be available shortly, implements verbatim EN :2004 Contact: David Fisher davidfisher@bsi-globalcom BS MA 25:1973 Specification for ships' windows This standard was mentioned as being withdrawn in the May issue of Update Standards Due to a committee decision, this has now been re-instated, and placed under review Contact: Caroline Langdon carolinelangdon@bsi-globalcom GW/3 B/522 B/522 SME/32 Page 1 of 34

2 IEC 60512:- Connectors for electronic equipment Tests and measurements IEC :2006 General Applicable publications This standard has been published EPL/48 BS 2646:- Autoclaves for sterilization in laboratories BS :1993 Specification for design, construction, safety and performance BS 4677:1984 Specification for arc welding of austenitic stainless steel pipework for carrying fluids BS 6652:1985 Specification for packagings resistant to opening by children WEE/21 PKW/0 by IEC and is now being considered by CENELEC for adoption as EN :2006 If adopted it will be implemented in the UK as BS EN , replacing BS EN :2001 Contact: Conrad Edel EPL/48 BRITISH STANDARDS PROPOSED FOR CONFIRMATION BS 1679:- Containers for pharmaceutical dispensing BS :1973 Eye dropper bottles BS :1994 Specification for glass medicine bottles BS :1968 Ribbed oval glass bottles BS :1992 Specification for glass and plastics containers for solid dosage forms, semi-solids and powders BS 2633:1987 Specification for class I arc welding of ferritic steel pipework for carrying fluids PKW/0 PKW/0 PKW/0 PKW/0 PKW/0 WEE/21 BS :1990 Guide to planning and installation BS :1993 Guide to safe use and operation BS :1991 Guide to maintenance BS :1993 Methods of test for function and performance BS 2971:1991 Specification for class II arc welding of carbon steel pipework for carrying fluids BS 3313:- Specification for aluminium capping foil and strip for dairy product containers BS :1968 Aluminium capping foil for glass containers BS 3733:1974 Specification for endless V-belt drives for agricultural purposes BS 4602:1977 Specification for the use of metric units in specifications for glass containers and finishes WEE/21 PKW/0 PKW/0 MCE/10 PKW/0 BS 6990:1989 Code of practice for welding on steel pipes containing process fluids or their residuals BS EN ISO 11807:- Integrated optics Vocabulary BS EN ISO :2005 Basic terms and symbols BS EN ISO :2005 Terms used in classification BS EN ISO 14880:- Microlens array BS EN ISO :2005 Vocabulary BS EN ISO 14881:2005 Integrated optics Interfaces Parameters relevant to coupling properties BS ISO TR 11552:1997 Lasers and laser-related equipment Laser materials-processing machines Performance specifications and benchmarks for cutting of metals BRITISH STANDARDS REVIEWED AND CONFIRMED BS 1990:- WEE/21 CPW/172 CPW/172 CPW/172 CPW/172 CPW/172 CPW/172 EPL/76 Wood poles for overhead power and telecommunication lines B/518 BRITISH STANDARDS REVIEWED AND CONFIRMED Page 2 of 34

3 BS :1984 Specification for softwood poles BS 3044:1990 Guide to ergonomics principles in the design and selection of office furniture BS 5760:- Reliability of systems, equipment and components BS :1998 Guide to assessment of reliability of systems containing software BS 5852:- Fire tests for furniture BS :1979 Methods of test for the ignitability by smokers' materials of upholstered composites for seating B/518 PH/9 DS/1 DS/1 FW/6 FW/6 BS 7912:2001 Power cables with XLPE insulation and metallic sheath, and their accessories, for rated voltages from 66 kv (U$dm=725 kv) to 132kV (U$dm=145kV) Requirements and test methods BS 7933:- Electric cables Accessories Material characterization BS :1998 Resinous compounds before cure and in the cured state BS EN ISO 16017:- Indoor, ambient and workplace air Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography BS EN ISO :2001 Pumped sampling GEL/20/16 GEL/20/11 GEL/20/11 EH/2/3 EH/2/3 BS :1967 Standard diving equipment This standard has been proposed for obsolescence as it is no longer felt to be relevant BS 4548:1987 Specification for synchronous belt drives for industrial applications This standard has been proposed for obsolescence as its contents have been superseded by ISO 5294 and ISO BS 5372:1997 Specification for dimensions of cable terminations for multi-core extruded solid dielectric insulated distribution cables of rated voltages 600/1000 V and 1900/3300 V having copper or aluminium conductors This standard has been proposed for obsolescence as it is no longer in general use for new equipment and does not need to be PH/4/7 MCE/10 GEL/20/11 BS :1982 Methods of test for the ignitability of upholstered composites for seating by flaming sources FW/6 PD 6663:2000 Guidelines to BS EN Value management Practical guidance to its use and intent DS/1 maintained BS 7966:2000 Recommendations for design of cork removal devices PKW/0 BS 7176:1995 This standard has been proposed Specification for resistance to ignition of upholstered furniture for non-domestic seating by testing composites BS 7177:1996 Specification for resistance to ignition of mattresses, divans and bed bases FW/6 FW/6 BRITISH STANDARDS PROPOSED FOR DECLARATION OF OBSOLESCENCE BS 3414:2000 Specification for hand-held crown bottle openers This standard has been proposed for obsolescence as it has been superseded by BS EN 14798:2006 PKW/0 for obsolescence as it has been superseded by BS EN 14887:2005 BRITISH STANDARDS PROPOSED FOR WITHDRAWAL BS 1821:1982 Specification for class I oxy-acetylene welding of ferritic steel pipework for carrying fluids WEE/21 BS 4001:- Care and maintenance of underwater breathing apparatus PH/4/7 This standard has been proposed for withdrawal as it is no longer industry practice to use oxy-acetylene welding for pipework BRITISH STANDARDS PROPOSED FOR WITHDRAWAL Page 3 of 34

4 BS 2640:1982 Specification for class II oxy-acetylene welding of carbon steel pipework for carrying fluids This standard has been proposed for withdrawal as it is no longer industry practice to use WEE/21 BS :1990 Code of practice for the protection of vehicles and goods in transit This standard has been proposed for withdrawal as it is no longer felt to be relevant GW/1 BS 76:1974 Specification for tars for road purposes This standard has been withdrawn because tar is no longer used in UK road materials, rendering it out of date B/510 oxy-acetylene welding for pipework BS 6858:1987 BS 684:- BS 4001:- Care and maintenance of underwater breathing apparatus BS :1998 Recommendations for the compressed air open circuit type This standard has been proposed PH/4/7 PH/4/7 Specification for manually operated positioning devices and associated anchorage lines for use with industrial safety belts and harnesses This standard has been proposed for withdrawal as it is no longer felt to be relevant PH/5 Methods of analysis of fats and fatty oils BS :1998 Other methods Determination of tocopherols and tocotrienols contents Superseded by BS EN ISO AW/307 AW/307 for withdrawal as it has been BS 7870:- 9936:2006 superseded by BS EN BS 5076:1974 Specification for hospital storage cabinets for bottled fluids (electrically heated) This standard has been proposed for withdrawal as it is no longer felt to be relevant BS 6068:- Water quality BS :1987 Physical, chemical and biochemical methods Method for the determination of ammonium Automated spectrometric method EH/3 EH/3 LV and MV polymeric insulated cables for use by distribution and generation utilities BS :- Specification for distribution cables with extruded insulation for rated voltages of 11 kv and 33 Kv BS :2001 Single core 11 kv copper foil sheath cables This standard has been proposed for withdrawal as it is no longer relevant to modern requirements, though it is not being directly superseded GEL/20/16 GEL/20/16 GEL/20/16 BS 1387:1985 Specification for screwed and socketed steel tubes and tubulars and for plain end steel tubes suitable for welding or for screwing to BS 21 pipe threads Superseded by BS EN 10255:2004 BS 2745:- Washer-disinfectors for medical purposes BS :1993 Specification for general requirements Superseded by BS EN ISO :2006 ISE/8 This standard has been proposed for withdrawal as it is no longer felt to be relevant BS 6803:- Vehicle security alarm systems GW/1 BS :2001 Single core 33 kv copper wire/foil sheath cables This standard has been proposed for withdrawal as it is no longer relevant to modern requirements, GEL/20/16 BS :1993 Specification for human waste container washer-disinfectors Superseded by BS EN ISO :2006 BS :1993 Specification for installed systems GW/1 though it is not being directly superseded This standard has been proposed for withdrawal as it is no longer felt to be relevant BRITISH STANDARDS WITHDRAWN BRITISH STANDARDS WITHDRAWN Page 4 of 34

5 BS :1993 Specification for washer-disinfectors except those used for processing human-waste containers and laundry Superseded by BS EN ISO :2006 BS 2750:- Acoustics Measurement of sound insulation in buildings and of building elements BS :- Laboratory measurement of room-to-room airborne sound insulation of a suspended ceiling with a plenum above it See BS EN BS 4189:1967 Specification for conventional typographical character for legibility tests (ISO test character) Superseded by BS ISO 446:2004 BS 5293:- Sampling and testing carbon black for use in the rubber industry BS :2001 Method for determination of iodine absorption number Superseded by BS ISO 1304:2006 BS 5396:1976 Specification for seamless steel CO$d2 containers for fixed fire-fighting installations on ships Superseded by BS ISO 3500:2005 BS 5621:1992 Specification for dimensions of rotary masonry and rotary masonry IDT/1/1 PRI/50 PRI/50 PVE/3 BS 5760:- Reliability of systems, equipment and components BS :1982 Guide to reliability practices: examples This standard has withdrawn as the examples it cites are no longer applicable or current BS 6010:- Rolling bearings Bearings with spherical outside surface and extended inner ring width BS :1993 Specification for insert bearings and eccentric locking collars Superseded by BS ISO 9628:2006 BS 6265:1982 Specification for resistance seam welding of uncoated and coated low carbon steel Superseded by BS ISO 16433:2006 BS 6385:1996 Machinery for forestry Winches Performance requirements Superseded by BS ISO 19472:2006 BS 6717:2001 Precast, unreinforced concrete paving blocks Requirements and test methods Superseded by BS EN 1338:2003 BS 7449:1991 Specification for inclusion of glass in the construction of furniture, other than tables or trolleys, DS/1 DS/1 MCE/7 WEE/29 AGE/29 B/507 BS EN ISO 140:- Acoustics Measurement of sound insulation in buildings and of building elements BS EN ISO :2000 Laboratory measurement of room-to-room airborne and impact sound insulation of an access floor Superseded by BS EN ISO :2006 BS EN 868:- Packaging materials and systems for medical devices which are to be sterilized BS EN 868-1:1997 General requirements and test methods Superseded by BS EN ISO :2006 BS EN 874:1995 Gas welding equipment Oxygen/fuel gas blowpipes (cutting machine type) of cylindrical barrel Type of construction, general specifications, test methods Superseded by BS EN ISO 5172:2006 BS EN 906:1996 Polyolefin agricultural twines Superseded by BS EN ISO 4167:2006 BS EN 1153:1996 Kitchen furniture Safety requirements and test methods for built-in and free standing kitchen cabinets and work tops Superseded by BS EN 14749:2005 EH/1/6 EH/1/6 WEE/18 TCI/77 FW/0 impact drills with hardmetal tips Superseded by BS ISO 5468:2006 MTE/5 including cabinets, shelving systems and wall hung or free standing mirrors Superseded by BS EN 14749:2005 FW/0 BRITISH STANDARDS WITHDRAWN Page 5 of 34

6 BS EN 1174:- Sterilization of medical devices Estimation of the population of micro-organisms on product BS EN :1996 Requirements Superseded by BS EN ISO CH/198 CH/198 BS EN 12073:2000 Welding consumables Tubular cored electrodes for metal arc welding with or without a gas shield of stainless and heat-resisting steels Classification Superseded by BS EN ISO 17633:2006 WEE/39 BS EN :2000 Bunched solderable polyurethane enamelled round copper wires, class 130, with silk covering This standard has been withdrawn since CENELEC has withdrawn the equivalent European standard GEL/ :2006 BS EN 20140:- BS EN :1995 BS EN :1997 Guidance Superseded by BS EN ISO :2006 BS EN :1997 Guide to the methods for validation of microbiological techniques Superseded by BS EN ISO :2006 BS EN 1727:1998 Domestic furniture Storage furniture Safety requirements and test methods Superseded by BS EN 14749:2005 CH/198 CH/198 FW/0 Acoustics Measurement of sound insulation in buildings and of building elements BS EN :1994 (BS :1987) Laboratory measurement of room-to-room airborne sound insulation of a suspended ceiling with a plenum above it Superseded by BS EN ISO :2006 BS EN 60285:1995 Alkaline secondary cells and batteries Sealed nickel-cadmium cylindrical rechargeable single cells EH/1 EH/1 PEL/21 Polyvinyl acetal enamelled round aluminium wire, class 105 This standard has been withdrawn since CENELEC and the IEC have withdrawn both the equivalent European & international standards BS EN :1996 Polyester enamelled rectangular copper wire, class 155 This standard has been withdrawn since CENELEC has withdrawn the equivalent European standard BS EN :1996 Polyester or polyesterimide enamelled round aluminium wire overcoated with polyamide, class GEL/55 GEL/55 BS EN ISO 9241:- Ergonomic requirements for office work with visual display terminals (VDTs) BS EN ISO :1996 Dialogue principles Superseded by BS EN ISO :2006 BS EN 12071:2000 Welding consumables Tubular electrodes for gas shielded metal arc welding of creep-resisting steels Classification Superseded by BS EN ISO 17634:2006 PH/9 PH/9 WEE/39 BS EN 60317:- Specifications for particular types of winding wires BS EN :1995 Polyvinyl acetal enamelled round copper wire, class 105 This standard has been withdrawn since CENELEC has withdrawn the equivalent European standard BS EN :1996 Polyester enamelled round copper wire, class 155 This standard has been withdrawn following CENELEC's withdrawal of the equivalent European standard, and the supersession of the international standard from which GEL/55 GEL/55 GEL/ This standard has been withdrawn since CENELEC and the IEC have withdrawn both the equivalent European & international standards BS EN :1997 Polyester enamelled round copper wire, class 130 L This standard has been withdrawn since CENELEC has withdrawn the equivalent European standard BS EN :1998 Polyester enamelled round copper wire, class 130 This standard has been withdrawn since CENELEC has withdrawn the equivalent European standard GEL/55 GEL/55 GEL/55 the European publication was derived BRITISH STANDARDS WITHDRAWN Page 6 of 34

7 BS EN 60335:- Safety of household and similar electrical appliances BS EN :- Particular requirements BS EN :1997 Kitchen machines Superseded by BS EN :2003 BS EN :1996 Electrical heating appliances for breeding and rearing animals Superseded by BS EN :2003 BS EN 60454:- Pressure-sensitive adhesive tapes for electrical purposes BS EN :- Specifications for individual materials BS EN :1998 Cellulose acetate woven fabric tapes with rubber thermosetting adhesive Superseded by BS EN :2006 BS EN :1996 Requirements for combined cellulose-viscose woven fabric tapes, one side covered with a thermoplastic material, the other side with rubber thermosetting adhesive Superseded by BS EN :2006 CPL/61/01 CPL/61/01 CPL/61/01 CPL/61/8 ISE/8 ISE/8 ISE/8 GEL/15 BS EN 60995:1995 Determination of the prototype performance from model acceptance tests of hydraulic machines with the consideration of scale effects Superseded by BS EN 60193:1999 BS EN 61436:1998 Secondary cells and batteries containing alkaline or other non-acid electrolytes Sealed nickel-metal hydride rechargeable single cells Superseded by BS EN :2003 BS EN 61440:1998 Secondary cells and batteries containing alkaline or other non-acid electrolytes Sealed nickel-cadmium small prismatic rechargeable single cells Superseded by BS EN :2003 BS EN 61549:1996 Specification for miscellaneous lamps Superseded by BS EN 61549:2003 BS EN 61808:2001 Secondary cells and batteries containing alkaline or other non-acid electrolytes Sealed nickel-metal hydride button rechargeable single cells Superseded by BS EN :2003 BS EN 61951:- Secondary cells and batteries containing alkaline or other non-acid electrolytes Portable MCE/15 PEL/21/1 PEL/21/1 CPL/34/1 PEL/21/1 BS EN :2001 Nickel-cadmium Superseded by BS EN :2003 BS EN :2001 Nickel-metal hydride Superseded by BS EN :2003 DD ENV 12314:- Road transport and traffic telematics Automatic vehicle and equipment identification DD ENV :1997 Reference architectures and terminology Superseded by BS EN ISO 14814:2006 DD ENV 14027:2001 Method for the simulation of wear before the detection of nickel release from coated metal and combination spectacle frames This standard has been withdrawn as a result of a CENBT resolution BS ISO 6549:1999 Road vehicles Procedure for H- and R-point determination Superseded by BS ISO 20176:2006 PD R :1999 Guide for the use of the terminology for testing procedures This standard has been withdrawn since CENELEC has withdrawn the equivalent European standard PEL/21/1 PEL/21/1 EPL/278 EPL/278 CH/172/3 AUE/12 GEL/9 sealed rechargeable single cells PEL/21/1 BRITISH STANDARDS WITHDRAWN Page 7 of 34

8 PD R :1999 Railway applications Guide to the specification of a guided transport system This standard has been withdrawn since CENELEC has withdrawn the equivalent European standard BS M 80:1995 Air cargo equipment Wide body aircraft main deck container/pallet loader Functional requirements Superseded by BS ISO 6967:2006 NEW WORK STARTED BS 1139:- Metal scaffolding BS (Revision) Couplers will supersede BS :1991 BS 3379 (Revision) Combustion modified flexible polyurethane cellular materials for loadbearing applications Specification will supersede BS 3379:2005 BS 4515:- Specification for welding of steel pipelines on land and offshore BS (Revision) Carbon and carbon manganese steel pipelines will supersede BS :2004 BS 7609:1992/Amendment 1 Code of practice for installation and inspection of uninsulated compress ion and mechanical connectors for power cables with copper or aluminium conductors GEL/9 ACE/57 B/514/21 B/514/21 PRI/71 WEE/21 WEE/21 GEL/20/11 BS 7727:1994/Amendment 1 Code of practice for installation and inspection of pre-insulated compression terminals and connectors for cables with copper conductors up to 6 mm2 (10AWG) GEL/20/11 BS 7907 (Revision) Code of practice for the design and manufacture of children's clothing to promote mechanical safety will supersede BS 7907:1997 Respiratory protective devices for use against chemical, biological, radiological and nuclear (CBRN) agents BS Powered air-purifying respirators Specification BS 8485 Code of practice for the treatment of soil gas in brownfield sites BS EN 339:- Determination of slip resistance of pedestrian surfaces BS EN Reference method BS EN Portable methods TCI/66 PH/4 PH/4 BS 8468:- I/- B/556 B/556 will partially supersede Parts 1 to 3 of BS 7976:2002 B/556 BS EN 1866:- Mobile fire extinguishers FSH/2 BS EN Additional requirements to EN for the construction, resistance to pressure and mechanical tests for extinguishers with a maximum allowable pressure equal to or lower than 30 bar will partially supersede BS EN 1866:2005 BS EN ISO 8501:- Preparation of steel substrates before application of paints and related products Visual assessment of surface cleanliness BS EN ISO (Revision) Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coating will supersede BS EN ISO :2001 & BS EN ISO :Supplement:2001 BS EN ISO 9969 Thermoplastics pipes Determination of ring stiffness BS EN Slurry surfacing Specifications BS EN 13277:- Protective equipment for martial arts BS EN Additional requirements and test methods for hand and foot protectors BS EN 13835:2002/Amendment 1 Founding Austenitic cast irons FSH/2 STI/21 STI/21 PRI/88/4 B/510/2 PH/3/9 PH/3/9 ISE/35 NEW WORK STARTED Page 8 of 34

9 BS EN ISO (Revision) BS EN BS EN XXXXX Sterilization of health care Cable trunking systems and cable Sampling of sewage sludge, products Biological indicators ducting systems intended for treated biowastes and soils in the Guidance for the selection, use and interpretation of results will supersede BS EN ISO 14161:2001 BS EN 14465/Amendment 1 Textiles Upholstery fabrics Specification and method of test BS EN ISO 15103:- Plastics Poly (phenylene ether) (PPE) moulding and extrusion materials BS EN ISO Designation system and basis for specifications BS EN ISO (Revision) Steel gate, globe and check valves TCI/66 PRI/82 PRI/82 mounting on walls and ceilings BS EN 60331:- Tests for electric cables under fire conditions Circuit integrity BS EN (Edition 1) Apparatus Fire with shock at a temperature of at least 830$0DC for cables with an overall diameter not exceeding 20mm BS EN (Edition 1) Procedures and requirements for fire with shock Cables of rated voltage up to and including 0, 6/1, 0 kv and with an overall diameter not exceeding 20mm PEL/213 GEL/20/18 GEL/20/18 GEL/20/18 landscape Framework for the preparation and application of a sampling plan BS ISO 3807:- Dissolved acetylene cylinders Basic requirements BS ISO Cylinders without fusible plugs BS ISO Cylinders with fusible plugs BS ISO 3814 Tests for measuring reaction to fire of building materials Their development and application H/-/4 PVE/3 PVE/3 PVE/3 FSH/21 for sizes DN 100 and smaller for the petroleum and natural gas industries will supersede BS EN ISO 15761:2002 PSE/7/8 BS EN 60335:- Household and similar electrical appliances Safety CPL/61/14 BS ISO 4141:- Road vehicles Multi-core connecting cables AUE/16 BS EN ISO 17078:- Petroleum and natural gas industries Drilling and production equipment BS EN ISO Latches and related tools for side-pocket mandrels PSE/17/-/4 PSE/17/-/4 BS EN Particular requirements for washing machines BS EN 60601:- Medical electrical equipment BS EN Particular requirements for basic CPL/61/14 CH/62/2 BS ISO Test methods and requirements of coiled cable assemblies BS ISO 5660:- Reaction to fire tests Heat release, smoke production and mass loss rate AUE/16 FSH/21 BS EN ISO 21183:- Light conveyor belts BS EN ISO :2005/Amendment 1 List of equivalent terms BS EN 50085:- PRI/67 PRI/67 safety and essential performance of X-ray equipment for radiography and radioscopy BS EN 61010:- Safety requirements for electrical equipment for measurement, control, and laboratory use CH/62/2 EPL/66 BS ISO Heat release rate (cone calorimeter method) BS ISO Smoke production rate (dynamic measurement) FSH/21 FSH/21 Cable trunking systems and cable ducting systems for electrical installations PEL/213 BS EN XX Electrical safety of school children EPL/66 NEW WORK STARTED Page 9 of 34

10 BS ISO 7146:- Plain bearings Terms, characteristics and causes of damage and changes in appearance BS ISO Cavitation erosion and its countermeasures BS ISO 7849:- MCE/12 MCE/12 BS ISO (Revision) Textile floor coverings Laboratory cleaning procedure using spray extraction will supersede BS ISO 11379:1997 BS ISO 11783:- Tractor and machinery for agriculture and forestry Serial control and communications data network PRI/3 AGE/6 BS ISO/IEC Optically readable media BS ISO/IEC Radio frequency identification BS ISO/IEC General terms relating to radio communications IST/34 IST/34 IST/34 Determination of airborne sound power levels emitted by machinery using vibration measurement BS ISO Engineering method including determination of the adequate radiation factor BS ISO 8362:- Injection containers and accessories BS ISO Freeze drying closures for injection vials BS ISO 9057:1991/Corrigendum Glass containers 28mm tamper-evident finish for pressurized liquids Dimensions BS ISO 9463 Nuclear fuel technology Nitric acid feed solutions from reprocessing plants Spectrophotometric determination of plutonium after oxidation to plutonium (VI) EH/1/4 EH/1/4 CH/212 CH/212 PKW/0 NCE/9 BS ISO Implement messages application layer BS ISO Transportable gas containers AGE/6 Fitting of valves to gas cylinders will supersede BS EN ISO 13341:1998 PVE/3/7 BS ISO Nuclear energy Nuclear fuel technology Determination of neptunium in nitric acid solutions by molecular absorption spectrophotometry BS ISO Space systems Lessons learned Principles and rule guidelines BS ISO/IEC 18046:- Information technology Radio frequency identification device performance test methods BS ISO/IEC Test methods for tag performance NCE/9 ACE/68/-/5 IST/34 IST/34 BS ISO/IEC Locating systems BS ISO 22241:- Diesel engines NOx reduction agent AUS 32 BS ISO Handling, transportation, storage BS ISO Oil of lime expressed, Persian type (Citrus latifolia Tanaka) BS ISO Resilient floor coverings Specification for plain and decorative linoleum BS ISO 26021:- Road vehicles End of life activation of on-board pyrotechnic devices BS ISO General information and use case definition IST/34 MCE/22 MCE/22 AW/54 PRI/60 AUE/16 AUE/16 BS ISO 9895 Paper, board and pulps Test methods and quality specifications for paper and board will supersede BS 7325:1990 PAI/11 BS ISO/IEC 19726:- Information technology Automatic identification and data capture techniques Harmonized vocabulary abbreviations BS ISO/IEC General terms relating to AIDC IST/34 IST/34 BS ISO Communication requirements BS ISO TC107N640 Metallic coating Electroplated coating of tin-cobalt alloy AUE/16 STI/33 NEW WORK STARTED Page 10 of 34

11 BS IEC 60115:- Fixed resistors for use in electronic equipment BS IEC Generic specification BS IEC 60286:- Packing of components for automatic handling BS IEC F1 Type V: Packing of surface mount components on continuous pressed carrier tapes BS IEC 60384:- Fixed capacitors for use in electronic equipment BS IEC Generic specification BS IEC Preferred dimensions of shaft ends, bushes and for the mounting of single hole, bush-mounted, shaft-operated electronic components BS IEC TS 62396:- Optimising system design BS IEC TS Accommodation of the SEE of atmospheric radiation PD Characterization of sludge Physical consistency Thixotropic EPL/40X EPL/40X EPL/40X EPL/40X EPL/40X EPL/40X EPL/40X GEL/107 GEL/107 DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT 06/ DC BS ISO Road vehicles Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 3 On-board transmitter simulation 06/ DC BS 8471 Guide to particle sizing methods 06/ DC BS ISO Machine performance studies Measured data Discrete parts are required by 10 July, / DC ISO Rotary shaft lip type seals incorporating elastomeric sealing elements Part 5 Identification of visual imperfections 06/ DC ISO 7849 Acoustics Determination of airborne sound power levels emitted by machinery using vibration measurement Part 1 Survey method using a fixed radiation factor AUE/16 LBI/37 SS/4 MCE/11 EH/1/4 06/ DC BS EN ISO 472 Plastics Vocabulary 06/ DC ISO Petroleum and natural gas industries Specific requirements for offshore structures Part 6 Marine operations 1800 members, / DC ISO Health informatics Point-of-care medical device communication Part Analytical instruments Point of care test 3300 members, / DC ISO Buildings and constructed assets Service life planning Part 8 Reference service life and service life estimation 06/ DC ISO Water quality Determination of arsenic Part 2 Method using hydride generation atomic absorption spectrometry (HG-AAS) 06/ DC ISO Water quality Determination of selenium Part 2 Method using hydride generation atomic absorption spectrometry PRI/10 B/525/12 IST/35 B/500 EH/3/2 behaviour and piling behaviour EH/5 (HG-AAS) EH/3/2 PD CEN/TR 00251XXX 06/ DC Health informatics Assuring ISO/DIS Textiles patient safety of health informatics Determination of resistance to products water penetration Impact IST/35 penetration test DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT TCI/24 Page 11 of 34

12 06/ DC 06/ DC 06/ DC ISO Glass in building BS EN 3-9 Portable fire ISO Rubber, vulcanized Basic soda lime silicated glass extinguishers Part 9 Additional Determination of temperature raise products Part 1 Definitions and requirements to EN 3-7 for and resistance to fatigue in general physical and mechanical pressure resistance of CO$d2 flexometer testing Part 4 Constant properties B/520/1 extinguishers FSH/2 stress flexometer PRI/22 06/ DC 06/ DC 06/ DC CEN TR Packaging Reuse BS EN ISO Clinical ISO 6872 Dentistry Ceramic Methods for assessing the performance of a reuse system 06/ DC ISO Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering method for small movable sources in reverberant fields Part 1 Comparison method for a hard-walled test room PKW/0 EH/1/4 laboratory testing and in vitro diagnostic test systems Susceptibility testing of infectious agents and evaluation of performance of antimicrobial susceptibility devices Part 2Evaluation of performance of antimicrobial susceptibility device 06/ DC ISO Soil quality Guidance on long and short term storage of soil samples CH/212 EH/4 materials 06/ DC BS ISO Acoustics Continuous airport noise monitoring 06/ DC EN Industrial thermoprocessing equipment Part 2 Safety requirements for combustion and fuel handling systems 06/ DC CH/106/2 EH/1/2 MCE/3/8 06/ DC EN ISO Ergonomics of human-system interaction Part 410 Design criteria for physical input devices 1800 members, 3600 PH/9 06/ DC ISO Paints and varnishes Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion are required by 30 June, 2006 STI/10 EN ISO Geotechnical investigation and testing Field testing Part 12 Mechanical cone penetration test 06/ DC ISO Hydraulic fluid power Electrically modulated hydraulic B/526/3 06/ DC BS EN 3-10 Portable fire extinguishers Part 10 Provisions for evaluating the conformity of a portable fire extinguisher to EN 3 part 7 06/ DC BS EN 3-8 Portable fire extinguishers Part 8 Additional requirements to EN 3-7 for the construction resistance to pressure and mechanical tests for extinguishers with a maximum allowable pressure equal to or lower than 30 bar FSH/2 FSH/2 06/ DC ISO/DIS 704 Terminology work Principles and methods 06/ DC BS Components for smoke and heat control systems Part 7 Code of practice on functional recommendations and calculation methods for smoke and heat control systems for covered car parks are required by 30 June, 2006 TS/1 FSH/25/4 valves Part 3 Test methods for pressure control valves MCE/18/-/8 06/ DC IEC Selection and dimensioning of high-voltage insulators for polluted conditions Part 1 Definitions, information and general principles PEL/36 are required by 30 July, 2006 DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT Page 12 of 34

13 06/ DC 06/ DC 06/ DC ISO Workplace ISO Milk and milk ISO Plastics Measurement atmospheres Determination of products Sensory analysis Part 2 of antibacterial activity on plastics inorganic acids by ion chromatography Part 1 Non-volatile acids (sulfuric acid and phosphoric acid) 06/ DC ISO Small craft Hull construction Scantlings Part 7 Multihulls 06/ DC ISO Plastics Film and sheeting Determination of gas transmission rate Part 1 Differential-pressure method 06/ DC ISO 48 Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD) 06/ DC ISO Rubber, vulcanized or thermoplastic Determination of abrasion resistance using improved lambourn test machine 06/ DC EH/2/2 GME/33 PRI/75 PRI/22 PRI/22 Methodology Recommended methods for sensory evaluation 06/ DC ISO Determination of particle size distributions Electrical sensing zone method 06/ DC EN ISO 5999 Flexible cellular polymeric materials Polyurethane foam for load-bearing applications excluding carpet underlay Specification 06/ DC EN ISO 8307 Flexible cellular polymeric materials Determination of resilience by ball rebound 06/ DC ISO Fire tests Open calorimetry Measurement of the rate of production of heat and combustion products for fires of up to 20MW 06/ DC ISO Agriculture and forestry AW/5 LBI/37 PRI/71 PRI/24 FSH/21 surfaces 06/ DC BS ISO Oil of magnolia flower, china type (Michelia x alba DC) 06/ DC ISO Air cargo unit load devices Performance requirements and test parameters are required by 12 July, / DC IEC Nuclear instrumentation Scintillation gamma ray detector systems for the assay of radionuclides Calibration and routine tests 06/ DC EN ISO 20344/prA1 Personal protective equipment Test methods for footwear 06/ DC EN ISO 20345/prA1 Personal protective equipment Safety PRI/21 AW/54 ACE/57 NCE/2 PH/1 ISO 188 Rubber, vulcanized or thermoplastic Accelerated ageing and heat resistance tests 06/ DC PRI/22 machinery Powered material collecting systems Safety 06/ DC ISO Assistive products for AGE/20 footwear 06/ DC EN ISO 20347/prA1 Personal protective equipment Occupational PH/1 ISO Milk and milk products Sensory analysis Part 1 persons with vision impairments and persons with vision and footwear PH/1 General guidance for the recruitment, selection, training and monitoring of assessors AW/5 hearing impairments Acoustic and tactile signals for pedestrian traffic lights CH/173 06/ DC EN ISO 20346/prA1 Personal protective equipment Protective footwear PH/1 DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT Page 13 of 34

14 06/ DC BS 8477 Customer satisfaction Code of practice for customer service RMS/1 06/ DC BS 8477 Customer satisfaction Code of practice for customer service SVS/8 06/ DC BS AMD 1 Structural use of steelwork in building Part 1 Code of practice for design Rolled and welded sections B/525/31 06/ DC ISO Ergonomics of human-system interaction Part 20 Accessibility guidelines for information/communication technology (ICT) equipment and services PH/9 06/ DC ISO Bonded abrasives Determination and designation of grain size distribution Part 2 Microgrits F 230 to F 2000 MTE/13 06/ DC ISO Condition monitoring and diagnostics of machines Requirements for training and certification of personnel Part 4 Industrial lubricant analysis GME/21/7 06/ DC ISO Condition monitoring 06/ DC EN 839 Wood preservatives Determination of the protective effectiveness against wood destroying basidiomycetes Application by surface treatment 06/ DC BS Fences Part 1 Specification for chain link fences 06/ DC BS Fences Part 2 Specification for strained wire and wire mesh netting fences 06/ DC BS Fences Part 5 Specification for close-boarded and wooden palisade fences 06/ DC BS Fences Part 7 Specification for wooden post and rail fences 06/ DC BS Fences Part 8 Mild steel (low carbon steel) continuous barfences and hurdles Specification 06/ DC BS Fences Part 9 Specification for mild steel (low carbon steel) fences with round or square verticals and flat horizontals B/515/1 B/201 B/201 B/201 B/201 B/201 B/201 06/ DC BS Fences Part 12 Steel palisade fences Specification 06/ DC BS Fences Part 14 Specification for open mesh steel panel fences 06/ DC BS Fences Part 17 Specification for electric security fences Design, installation and maintenance 06/ DC EN ISO Non-destructive testing Equipment for eddy current examination Part 1 Instrument characteristics and verification 06/ DC EN ISO Non-destructive testing Equipment for eddy current examination Part 2 Probe characteristics and verification 06/ DC EN ISO Non-destructive testing Equipment for eddy current examination Part 3 System characteristics and verification B/201 B/201 B/201 WEE/46 WEE/46 WEE/46 and diagnostics of machines Requirements for training and certification of personnel Part 8 Thermography GME/21/7 06/ DC BS Fences Part 10 Specification for anti-intruder fences in chain link and welded mesh 06/ DC B/201 06/ DC BS 8481 Design, preparation and application of internal gypsum, cement, cement and lime plastering systems Specification B/544 BS Fences Part 11 Specification for prefabricated wood panel fences B/201 DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT Page 14 of 34

15 06/ DC 06/ DC 06/ DC BS 4N Aircraft oxygen IEC Communication BS 5756 Visual strength grading of systems and equipment Part 5 Guide to fire and explosion network and systems in substations Part hardwood Specification B/518 hazards associated with oxygen, including handling, storage and replenishment 06/ DC ACE/38 Communications systems for distributed energy resources (DER) Logical nodes 1800 members, 3600 PEL/57 06/ DC ISO Textiles Test method for nonwovens Part 15 Evaluation of air permeability TCI/24 ISO Rubber, raw Determination of residual monomers and other volatile low-molecular-mass compounds by capillary gas chromatography Thermal desorption (dynamic headspace) method 06/ DC ISO/IEC Information technology AIDC techniques Radio frequency identification for item management Part 7 Parameters for active air interface communications at 433 MHz PRI/23 IST/34 06/ DC EN Adhesives for load bearing timber structures Test methods Part 3 Creep deformation test at cyclic climate conditions with specimens loaded in bending shear 06/ DC ISO 540 Hard coal and coke Determination of ash fusibility 06/ DC PRI/52 PTI/16 06/ DC ISO Textiles Test methods for nonwovens Part 16 Evaluation of water resistance [hydrostatic pressure test] 06/ DC ISO Textiles Test methods for nonwovens Part 18 Determination of breaking strength and elongation of nonwoven materials using the grab tensile test 06/ DC TCI/24 TCI/24 06/ DC BS Strength and stability of furniture Part 7 Domestic and contract storage furniture Performance requirements 06/ DC IEC Hydroelectric power plants Communication for monitoring and control 1800 members, 3600 FW/0 PEL/57 ISO Guidance on the determination of trace elements in coal 06/ DC EN Flanges and their joints Design rules for gasketed circular flange connections Part 2 Gasket parameters 06/ DC BS 6891 Installation of low pressure pipework of up to 35 mm (R1$9D) in domestic premises (2nd family gas) Specification PTI/16 PSE/15 EN ISO Paints and varnishes T-bend test are required by 30 June, / DC EN Packaging Transport packaging for dangerous goods Comparative material testing of polyethylene grades 06/ DC IEC :1998 AMD 2 International electrotechnical vocabulary Part 121 Electromagnetism STI/10 PKW/0 GEL/1 (amendment no 1) GSE/30/-/3 06/ DC ISO Condition monitoring 06/ DC and diagnostics of machines BS 4978 Visual strength grading of softwood Specification B/518 Acoustic emission GME/21/7 are required by 30 June, 2006 DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT Page 15 of 34

16 06/ DC ISO Leather Vocabulary 1800 members, / DC IEC ED2 Low-voltage switchgear and controlgear Controller-device interfaces (C DIs) Part 2 Actuator sensor interface (AS-i) 1800 members, 3600 TCI/69 PEL/17/2 06/ DC EN Cold formed steel sheet piling Part 1 Technical delivery conditions 06/ DC EN Cold formed steel sheet piling Part 2 Tolerances on shape and dimensions 06/ DC ISO/IEC ISE/12 ISE/12 06/ DC IEC ED2 Arc welding equipment Part 2 Liquid cooling systems are required by 15 June, / DC ISO 663 Animal and vegetable fats and oils Determination of insoluble impurities content 06/ DC WEE/6 AW/307 06/ DC IEC ED 20 Low-voltage switchgear and controlgear Controller-device interfaces (C DIs) Part 3 DeviceNet 1800 members, / DC ISO Implants for surgery Wear of total intervertebral spinal disc prostheses Part 1 Loading and displacement parameters for wear testing and corresponding environmental conditions for test are required by 30 June, / DC EN Buoyant aids for swimming instruction Part 1 Safety requirements and test methods for buoyant aids to be worn 06/ DC EN Buoyant aids for swimming instruction Part 2 Safety requirements and test methods for buoyant aids to be held 06/ DC EN Hot-rolled steel sheet piling Part 2 Tolerances on shape and dimensions PEL/17/2 CH/150/5 SW/136 SW/136 ISE/12 Enterprise-control system integration Part 3 Activity models of manufacturing operations management 1800 members, / DC EN Basic standard for the calculation and the measurement of human exposure to electromagnetic fields from broadcasting service transmitters in the MF and HF bands (3 MHz 30 MHz) 06/ DC EN Product standard to demonstrate the compliance of broadcast station transmitters with the reference levels and the basic restrictions related to public exposure to radio frequency electromagnetic fields (3MHz 30 MHz) 06/ DC EN Assessment of the compliance of broadcast station transmitters with the reference levels or the basic restrictions related to public and occupational exposure to radio frequency electromagnetic fields (3 MHz-30 MHz) when put into service AMT/5 GEL/106 GEL/106 GEL/106 IEC Arc welding equipment Part 5 Wire feeders are required by 15 June, / DC EN Gas-fired central heating boilers Part 1 General requirements and tests 1800 members, 3600 are required by 28 July, / DC EN Thermal performance of curtain walling Calculation of thermal transmittance 06/ DC EN Open data communication in building automation, controls and building management implementation guideline Control network protocol Part 5 Implementation guideline 06/ DC ISO 1230 Photography Determination of flash guide numbers 06/ DC EN 1926 Natural stone test methods Determination of uniaxial compressive strength WEE/6 GSE/29 B/540 RHE/16 CPW/42 B/545 DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT Page 16 of 34

17 06/ DC CENELEC HD 229 S3 Cables of rated voltages up to and including 450/750 V and having crosslinked insulation Part 9 Single core halogen-free non-sheathed cables for fixed wiring having low emission of smoke GEL/20/17 06/ DC CENELEC HD 2210 S2 Cables of rated voltages up to and including 450/750 V and having crosslinked insulation Part 10 EPR insulated and polyurethane sheathed flexible cables GEL/20/17 06/ DC CENELEC HD 2211 S2 Cables of rated voltages up to and including 450/750 V and having crosslinked insulation Part 11 EVA cords and flexible cables GEL/20/17 06/ DC CENELEC HD 2212 S2 Cables of rated voltages up to and including 450/750 V and having crosslinked insulation Part 12 Heat resistant EPR cords GEL/20/17 06/ DC ISO Two-wheeled motorcycles Positioning of lighting and light-signalling devices AUE/14 06/ DC IEC Ambient and/or directional dose equivalent (rate) meters and/or monitors for beta, X and gamma radiation Part 2 High range beta and photon dose and dose rate portable instruments for emergency radiation protection purposes NCE/2 06/ DC BS AU d AMD 2 Passenger car tyres and rims Part 1 Tyres (metric series) AUE/4 06/ DC EN Steel for the reinforcement of concrete Galvanized reinforcing steel ISE/9/1 06/ DC EN 1936 Natural stone test methods Determination of real density and apparent density, and of total and open porosity B/545 06/ DC EN AMD 1 Cranes General design Part 2 Load actions MHE/3/1 06/ DC EN Animal feeding stuffs Determination of calcium, sodium, phosphorus, magnesium, potassium, iron, zinc, copper, manganese, cobalt, molybdenum, arsenic, lead and cadmium by ICP-AES AW/10 06/ DC IEC Photovoltaic devices Part 2 Requirements for reference solar devices GEL/82 06/ DC IEC CISPR 16-3 AMD 2 Specification for radio disturbance and immunity measuring apparatus and methods Part 3 CISPR technical reports GEL/210/12 06/ DC EN AMD 2 Metallic industrial piping Part 3 Design and calculation PVE/10 06/ DC EN ISO 1798 Flexible cellular polymeric materials Determination of tensile strength and elongation at break 06/ DC EN AMD 1 Automatic electrical controls for household and similar use Part 1 General requirements 06/ DC ISO Petroleum, petrochemical and natural gas industries Calculation of heater-tube thickness in petroleum refineries 1800 members, / DC EN Road transport and traffic telematics Electronic fee collection Interoperability application profile for DSRC 06/ DC BS ISO Plastics piping systems Glass-reinforced thermosetting plastics (GRP) pipes and fittings Determination of resistance to chemical attack on the inside of a section in deflected condition 06/ DC ISO 6571 Spices, condiments and herbs Determination of volatile oil content 06/ DC EN ISO Liquid petroleum products Determination of hydrocarbon types and oxygenates in petrol Multidimensional gas chromatography method PRI/24 CPL/72 PSE/17/-/6 EPL/278 PRI/88/2 AW/7 PTI/13 DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT Page 17 of 34