BS ISO BS ISO BS ISO BS ISO DD ISO/TS DD ISO/TS Electrotechnical

Transcription

1 British Standards Quick Reference Guide The following British Standards are listed or referred to in this issue of Update Standards with the exception of those in New Work Started. Building and civil engineering BS BS BS , 28 BS BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS ISO , 28 DD IEC/TS , 28 COMING IN AUTUMN The BSI Companion Guide to the Structural Eurocodes This guide will be available FREE to all purchasers of the Eurocodes and their National Annexes. It will include practical advice on how the new Eurocodes will work and their benefits to construction professionals. For further information visit Consumer products and services BS , 27 BS , 27 BS BS BS BS BS EN ISO BS EN ISO BS EN BS EN ISO BS EN BS EN BS EN DD ENV ISO DD ENV BS ISO BS ISO , 27 BS ISO BS ISO BS ISO BS ISO , 27 BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO DD ISO/TS DD ISO/TS Electrotechnical BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS , 28 BS BS EN BS EN , 28 BS EN BS EN , 27 BS EN BS EN BS EN BS EN , 22, 28 BS EN BS EN BS EN , 28 BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN , 16 BS EN BS EN BS EN , 27 BS EN BS EN BS EN BS EN BS EN BS IEC DD IEC/PAS DD CLC/TS DD IEC/TS , 28 DD IEC/TS PD CLC/TR Engineering BS BS BS BS BS BS BS BS BS BS , 28 BS BS EN BS EN , 28 BS EN ISO , 28 BS EN , 28 BS EN BS EN BS EN , 28 BS EN , 28 BS EN , 28 BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN ISO , 28 BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN ISO BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN ISO BS EN BS EN BS EN BS EN ISO BS EN ISO BS EN BS EN BS EN ISO BS EN BS EN ISO , 28 BS EN ISO BS EN ISO BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN ISO BS EN BS EN ISO , 28 BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO , 28 BS EN ISO BS EN ISO BS EN BS EN BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO Prices may be subject to change. Update Standards Aug 2008

2 British Standards Quick Reference Guide continued... BS ISO BS ISO BS ISO BS ISO BS ISO BS IEC , 28 BS IEC DD ISO/TS PD ISO/TR BS 4A BS 6L BS 6L BS 5L BS 7L BS 4L BS 4L BS 4L BS 3L BS 2L BS L BS L BS L BS L BS L BS L BS L BS L BS L BS 2L BS L BS L BS HC BS AU BS AU Health and environment BS , 28 BS BS BS EN BS EN BS EN BS EN ISO BS EN ISO BS EN ISO BS EN BS EN BS EN ISO BS EN BS EN BS EN ISO BS EN ISO , 28 BS EN , 20 BS ISO BS ISO DD ISO/TS Information systems DD BS EN ISO BS EN BS EN ISO BS EN ISO BS EN , 15 DD ENV BS ISO/IEC BS ISO/IEC TR , 28 BS ISO/IEC BS ISO/IEC BS ISO/IEC BS ISO BS ISO BS ISO BS ISO/IEC , 28 BS ISO/IEC Management systems DD CEN/TS DD CEN/TS Materials and chemicals BS BS 558 and BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS , 23 BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS EN ISO BS EN BS EN ISO BS EN BS EN BS EN BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN BS EN BS EN ISO BS EN ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO/TR , 20, 27 BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO PD ISO/TR PD ISO/TR Alpha-numeric sequence of British Standards quoted in this issue BS BS BS BS 558 and BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS , 27 BS BS BS , 23 BS BS BS BS BS BS BS BS BS BS BS BS BS BS , 28 BS BS BS BS BS BS BS BS BS BS BS BS BS , 27 BS BS BS BS BS , 28 BS BS , 28 BS BS BS BS BS BS BS BS BIP BIP BIP DD CEN/TS DD CEN/TS DD BS EN BS EN ISO BS EN BS EN ISO BS EN BS EN , 28 BS EN BS EN ISO , 28 BS EN , 28 BS EN BS EN BS EN BS EN BS EN Update Standards Aug 2008 Prices may be subject to change. 5

3 Alpha-numeric sequence of British Standards continued... BS EN , 28 BS EN , 28 BS EN BS EN , 28 BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN ISO BS EN BS EN ISO BS EN BS EN BS EN BS EN BS EN ISO , 28 BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN ISO BS EN ISO BS EN BS EN BS EN BS EN BS EN ISO BS EN BS EN BS EN BS EN BS EN BS EN BS EN ISO BS EN ISO BS EN BS EN BS EN BS EN BS EN ISO BS EN BS EN BS EN BS EN BS EN ISO , 28 BS EN BS EN BS EN ISO BS EN ISO BS EN ISO BS EN BS EN ISO BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN ISO BS EN BS EN BS EN BS EN BS EN BS EN BS EN ISO , 28 BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO , 28 BS EN ISO , 28 BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN , 28 BS EN BS EN BS EN , 27 BS EN BS EN BS EN BS EN BS EN , 22, 28 BS EN BS EN BS EN , 20 BS EN , 28 BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN , 15 BS EN BS EN BS EN , 16 BS EN BS EN BS EN , 27 BS EN BS EN BS EN BS EN BS EN DD ENV ISO DD ENV DD ENV BS ISO BS ISO BS ISO BS ISO BS ISO , 27 BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO , 27 BS ISO BS ISO BS ISO/IEC BS ISO BS ISO BS ISO BS ISO/TR , 20, 27 BS ISO BS ISO BS ISO BS ISO BS ISO/IEC TR , 28 BS ISO BS ISO/IEC BS ISO BS ISO BS ISO , 28 BS ISO BS ISO BS ISO BS ISO/IEC BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO/IEC BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO/IEC , 28 BS ISO/IEC BS IEC BS IEC , 28 BS IEC DD ISO/TS DD ISO/TS DD ISO/TS DD ISO/TS DD IEC/PAS DD CLC/TS DD IEC/TS , 28 DD IEC/TS PD ISO/TR PD ISO/TR PD ISO/TR PD CLC/TR BS 4A BS 6L BS 6L BS 5L BS 7L BS 4L BS 4L BS 4L BS 3L BS 2L BS L BS L BS L BS L BS L BS L BS L BS L BS L BS 2L BS L BS L BS HC BS AU BS AU PAS Prices may be subject to change. Update Standards Aug 2008

4 British Standards BRITISH STANDARDS The following British Standard publications are available from BSI Customer Services (see How to order on page 2). The publications listed below are new and revised British Standards that were made available last month. An existing BSI publication bearing a number identical to one announced below is automatically withdrawn unless stated otherwise. In all other cases of supersession, details are given and a corresponding entry appears in the British Standards withdrawn section. BRITISH STANDARD IMPLEMENTATIONS WILL BE SUPPLIED IN PREFERENCE TO EUROPEAN OR INTERNATIONAL STANDARDS, UNLESS OTHERWISE REQUESTED. Please order by the British Standard reference not the ISBN number. BS 2000 series standards are also available from: Library of the Energy Institute 61 New Cavendish Street London W1G 7AR Tel: Fax: lis@energyinst.org.uk For this series, member pricing is applicable to BSI and Energy Institute members. BS 6100: Building and civil engineering. Vocabulary BS :2008 Transport supersedes BS :1992, BS :1988, BS :1992 and BS :1990 ISBN members, non-members B/500 BS 6472: Guide to evaluation of human exposure to vibration in buildings BS :2008 Vibration sources other than blasting supersedes BS 6472:1992 ISBN GME/21 BS :2008 Blast-induced vibration supersedes BS 6472:1992 ISBN GME/21/6 BS EN PUBLICATIONS The following are British Standard implementations of the English language versions of European Standards (ENs). BSI has an obligation to publish all ENs and to withdraw any conflicting British Standards. This has led to a series of standards, BS ENs, using the EN number. Note: The date referenced in the identifier is the date of the European standard. BS EN 131: Ladders BS EN 131-3:2007 User instructions ISBN B/512 BS EN ISO 291:2008 Plastics. Standard atmospheres for conditioning and testing supersedes BS EN ISO 291:2005 ISBN PRI/21 BS EN 415: Safety of packaging machines BS EN 415-8:2008 Strapping machines ISBN members, non-members MCE/3/3 BS EN ISO 636:2008 Welding consumables. Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels. Classification supersedes BS EN 1668:1997 ISBN WEE/39 BS EN 980:2008 Symbols for use in the labelling of medical devices supersedes BS EN 980:2003 which remains current ISBN members, non-members CH/210/3 BS EN 1173:2008 Copper and copper alloys. Material condition designation supersedes BS EN 1173:1996 ISBN NFE/34 BS EN 1470:2008 Textile floor coverings. Classification of needled floor coverings except for needled pile floor coverings supersedes BS EN 1470:1998 ISBN PRI/3 BS EN 1650:2008 Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of fungicidal or yeasticidal activity of chemical disinfectants and antiseptics used in food, industrial, domestic and institutional areas. Test method and requirements (phase 2, step 1) supersedes BS EN 1650:1998 ISBN members, non-members CH/216 BS EN 2349: Aerospace series. Requirements and test procedures for relays and contactors BS EN :2007 Compass safety distance ISBN ACE/6 BS EN 2467:2007 Aerospace series. Steel FE-PA3901 (X2CrNi18-9). Air melted. Softened. Plate, sheet and strip. 0,4 mm a 20 mm. 520 MPa Rm 670 MPa ISBN ACE/61/-/15 BS EN 2591: Aerospace series. Elements of electrical and optical connection. Test methods BS EN :2007 Voltage standing wave ratio (VSWR) ISBN ACE/6 BS EN :2007 Insertion loss (I.L.) ISBN ACE/6 BS EN 3017:2008 Aerospace series. Washers, facing/packing. Heat resisting steel ISBN ACE/12 8 Prices may be subject to change. Update Standards Aug 2008

5 BS EN Publications continued... BS EN 3160:2007 Aerospace series. Steel FE-PM3801 (X5CrNiCu17-4). Air melted, solution treated and precipitation treated, bar a or D 200 mm, Rm 1310 MPa ISBN ACE/61/-/15 BS EN 3359:2007 Aerospace series. Steel FE-PM1503 (X3CrNiMoAl13-8-2). Vacuum induction melted and consumable electrode remelted, softened, forging stock a or D 300 mm ISBN ACE/61/-/15 BS EN 3361:2007 Aerospace series. Steel FE-PM1802 (X5CrNiCu15-5). Consumable electrode remelted, solution treated and precipitation treated, sheet and strip a 6mm, 1070 MPa Rm 1220 MPa ISBN ACE/61/-/15 BS EN 3364:2007 Aerospace series. Steel FE-PM1802 (X5CrNiCu15-5). Consumable electrode remelted, softened, forging stock a or D 300 mm ISBN ACE/61/-/15 BS EN 3365:2007 Aerospace series. Steel FE-PM3901 (X15CrNi17-3). Air melted, softened, forging stock a or D 300 mm ISBN ACE/61/-/15 BS EN ISO 3580:2008 Welding consumables. Covered electrodes for manual metal arc welding of creep-resisting steels. Classification supersedes BS EN 1599:1997 ISBN WEE/39 BS EN 3745: Aerospace series. Fibres and cables, optical, aircraft use. Test methods BS EN :2008 General ISBN ACE/6 BS EN 4098:2007 Aerospace series. Steel FE-PL1507 (40CrMoV12). Remelted, hardened and tempered, forgings De 50 mm, 1250 MPa Rm 1400 MPa ISBN ACE/61/-/15 BS EN 4165: Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175 C continuous BS EN :2007 Technical specification ISBN members, non-members ACE/6 BS EN 4216:2007 Aerospace series. Steel FE-CM3801 (GX5CrNiCuNb16-4). Homogenized, solution treated and precipitation hardened, investment casting De 50 mm, Rm 900 MPa ISBN ACE/61/-/15 BS EN 4379:2007 Aerospace series. Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb). Solution treated, forging De 200 mm ISBN ACE/61/-/48 BS EN 4461:2007 Aerospace series. Steel FE-PM1506 (X5CrNiMoAl13-8-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bar. a or D 150 mm. Rm 1200 MPa ISBN ACE/61/-/15 BS EN 4463:2007 Aerospace series. Steel FE-PM1506 (X5CrNiMoAl13-8-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bar. a or D 150 mm. Rm 1400 MPa ISBN ACE/61/-/15 BS EN 4464:2007 Aerospace series. Steel FE-PM1506 (X5CrNiMoAl13-8-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D 150 mm. Rm 1200 MPa ISBN ACE/61/-/15 BS EN 4465:2007 Aerospace series. Steel FE-PM1506 (X5CrNiMoAl13-8-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D 150 mm. Rm 1300 MPa ISBN ACE/61/-/15 BS EN 4466:2007 Aerospace series. Steel FE-PM1506 (X5CrNiMoAl13-8-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D 150 mm. Rm 1400 MPa ISBN ACE/61/-/15 BS EN 4467:2007 Aerospace series. Steel FE-PM1505 (X1CrNiMoAlTi12-9-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bar. a or D 150 mm. Rm 1200 MPa ISBN ACE/61/-/15 BS EN 4468:2007 Aerospace series. Steel FE-PM1505 (X1CrNiMoAlTi12-9-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bar. a or D 150 mm. Rm 1300 MPa ISBN ACE/61/-/15 BS EN 4470:2007 Aerospace series. Steel FE-PM1505 (X1CrNiMoAITi12-9-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D 150 mm. Rm 1200 MPa ISBN ACE/61/-/15 Please do not send confirmation of orders placed by telephone as it can lead to duplication 10 Prices may be subject to change. Update Standards Aug 2008

6 BS EN 4471:2007 Aerospace series. Steel FE-PM1505 (X1CrNiMoAITi12-9-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D 150 mm. Rm 1300 MPa ISBN ACE/61/-/15 BS EN 4472:2007 Aerospace series. Steel FE-PM1505 (X1CrNiMoAlTi12-9-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D 150 mm. Rm 1400 MPa ISBN ACE/61/-/15 BS EN 4626: Aerospace series. Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule. Operating temperatures -65 C to 125 C (cable dependent). Flush contacts BS EN :2008 Specification of performance and contact arrangements ISBN ACE/6 BS EN :2008 Adaptor for plug ISBN ACE/6 BS EN :2008 Adaptor for receptacle ISBN ACE/6 BS EN :2008 Optical contact (sub-assembly) for plug. Product standard ISBN ACE/6 BS EN 4627:2007 Aerospace series. Steel FE-PM 3504 (X4CrNiMo16-5-1). Air melted. Hardened and tempered. Forgings. De 150 mm MPa Rm 1300 MPa ISBN ACE/61/-/15 BS EN 4628:2007 Aerospace series. Steel FE-PM 3504 (X4CrNiMo16-5-1). Air melted. Hardened and tempered. Bar. De 150 mm MPa Rm 1300 MPa ISBN ACE/61/-/15 BS EN 4629:2007 Aerospace series. Steel FE-PM 3504 (X4CrNiMo16-5-1). Air melted. Hardened and tempered. Forging stock. De 300 mm ISBN ACE/61/-/15 BS EN ISO 9073: Textiles. Test methods for nonwovens BS EN ISO :2008 Determination of air permeability ISBN TCI/24 BS EN ISO :2008 Determination of water penetration (spray impact) ISBN TCI/24 BS EN ISO :2008 Determination of breaking strength and elongation of nonwoven materials using the grab tensile test ISBN TCI/24 BS EN ISO 9241: Ergonomics of human-system interaction BS EN ISO :2008 Guidance on World Wide Web user interfaces ISBN members, non-members PH/9 BS EN 10084:2008 Case hardening steels. Technical delivery conditions supersedes BS EN 10084:1998 ISBN members, non-members ISE/31 BS EN 12602:2008 Prefabricated reinforced components of autoclaved aerated concrete ISBN members, non-members B/523 BS EN 12697: Bituminous mixtures. Test methods for hot mix asphalt BS EN :2008 Determination of the water sensitivity of bituminous specimens supersedes BS EN :2003 ISBN B/510/1 BS EN 13036: Road and airfield surface characteristics. Test methods BS EN :2008 Measurement of transverse and longitudinal profiles in the evenness and megatexture wavelength ranges ISBN B/510/5 BS EN :2008 Determination of transverse unevenness indices ISBN B/510/5 BS EN 13606: Health informatics. Electronic health record communication BS EN :2008 Reference archetypes and term lists supersedes DD ENV :2000 ISBN members, non-members IST/35 BS EN 13755:2008 Natural stone test methods. Determination of water absorption at atmospheric pressure supersedes BS EN 13755:2002 ISBN B/545 Update Standards Aug 2008 Prices may be subject to change. 11

7 BS EN Publications continued... BS EN 13779:2007 Ventilation for non-residential buildings. Performance requirements for ventilation and room-conditioning systems supersedes BS EN 13779:2004 ISBN members, non-members RHE/2 BS EN ISO 13918:2008 Welding. Studs and ceramic ferrules for arc stud welding supersedes BS EN ISO 13918:1998 ISBN members, non-members WEE/-/1 BS EN 14164:2008 Foodstuffs. Determination of vitamin B6 by HPLC supersedes DD ENV 14164:2002 ISBN AW/-/3 BS EN ISO 14341:2008 Welding consumables. Wire electrodes and deposits for gas shielded metal arc welding of non alloy and fine grain steels. Classification supersedes BS EN 440:1995 ISBN WEE/39 BS EN 14500:2008 Blinds and shutters. Thermal and visual comfort. Test and calculation methods ISBN members, non-members B/538/3 BS EN ISO 14744: Welding. Acceptance inspection of electron beam welding machines BS EN ISO :2008 Principles and acceptance conditions supersedes BS EN ISO :2001 ISBN WEE/-/1 BS EN ISO 15012: Health and safety in welding and allied processes. Requirements, testing and marking of equipment for air filtration BS EN ISO :2008 Determination of the minimum air volume flow rate of captor hoods and nozzles ISBN WEE/40 BS EN 15012:2007 Plastics piping systems. Soil and waste discharge systems within the building structure. Performance characteristics for pipes, fittings and their joints ISBN PRI/88/1 BS EN 15037: Precast concrete products. Beam-and-block floor systems BS EN :2008 Beams ISBN members, non-members B/524 BS EN 15162:2008 Machines and plants for mining and tooling of natural stone. Safety requirements for gang saws ISBN MCE/3/15 BS EN 15163:2008 Machines and installations for the exploitation and processing of natural stone. Safety. Requirements for diamond wire saws ISBN MCE/3/15 BS EN 15164:2008 Machines and plants for mining and tooling of natural stone. Safety. Requirements for chainand belt-slotting machines ISBN MCE/3/15 BS EN 15240:2007 Ventilation for buildings. Energy performance of buildings. Guidelines for inspection of airconditioning systems ISBN members, non-members RHE/2 BS EN 15241:2007 Ventilation for buildings. Calculation methods for energy losses due to ventilation and infiltration in commercial buildings ISBN RHE/2 BS EN 15242:2007 Ventilation for buildings. Calculation methods for the determination of air flow rates in buildings including infiltration ISBN members, non-members RHE/2 BS EN 15243:2007 Ventilation for buildings. Calculation of room temperatures and of load and energy for buildings with room conditioning systems ISBN members, non-members RHE/2 BS EN 15302:2008 Railway applications. Method for determining the equivalent conicity ISBN members, non-members RAE/1/-/8 BS EN 15338:2007 Hardware for furniture. Strength and durability of extension elements and their components ISBN FW/0/1 BS EN 15372:2008 Furniture. Strength, durability and safety. Requirements for non-domestic tables ISBN FW/0/2 BS EN 15435:2008 Precast concrete products. Normal weight and lightweight concrete shuttering blocks. Product properties and performance ISBN members, non-members B/524 BS EN 15528:2008 Railway applications. Line categories for managing the interface between load limits of vehicles and infrastructure ISBN members, non-members RAE/1/-/8 BS EN 15546: Small bore connectors for liquids and gases in healthcare applications BS EN :2008 General requirements ISBN CH/ Prices may be subject to change. Update Standards Aug 2008

8 BS EN Publications continued... BS EN ISO 15792: Welding consumables. Test methods BS EN ISO :2008 Test methods for all-weld metal test specimens in steel, nickel and nickel alloys supersedes BS EN :1997 ISBN WEE/39 BS EN ISO :2008 Preparation of single-run and two-run technique test specimens in steel supersedes BS EN :1997 ISBN WEE/39 BS EN ISO 15883: Washer-disinfectors BS EN ISO :2008 Requirements and tests for washer-disinfectors employing chemical disinfection for thermolabile endoscopes ISBN members, non-members LBI/35 BS EN ISO 16000: Indoor air BS EN ISO :2008 Sampling strategy for polychlorinated biphenyls (PCBs), polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and polycyclic aromatic hydrocarbons (PAHs) ISBN EH/2/3 BS EN ISO 17132:2007 Paints and varnishes. T-bend test ISBN STI/10 BS EN ISO 17632:2008 Welding consumables. Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels. Classification supersedes BS EN 758:1997 ISBN members, non-members WEE/39 BS EN 50505:2008 Basic standard for the evaluation of human exposure to electromagnetic fields from equipment for resistance welding and allied processes ISBN members, non-members WEE/29 BS EN 60254: Lead-acid traction batteries BS EN :2008 Dimensions of cells and terminals and marking of polarity on cells supersedes BS EN :1997 ISBN PEL/21 BS EN 60539: Directly heated negative temperature coefficient thermistors BS EN :2008 Generic specification supersedes BS EN :2002 ISBN members, non-members EPL/40X BS EN 60601: Medical electrical equipment BS EN :2008 General requirements for basic safety and essential performance. Collateral standard. Requirements for environmentally conscious design ISBN members, non-members CH/62/1 BS EN 60728: Cable networks for television signals, sound signals and interactive services BS EN :2008 Passive wideband equipment for coaxial cable networks supersedes BS EN :1999 ISBN members, non-members EPL/100 BS EN 60738: Thermistors. Directly heated positive stepfunction temperature coefficient BS EN : Blank detail specification BS EN :2008 Current limiting application. Assessment level EZ supersedes BS EN :1999 ISBN EPL/40X BS EN :2008 Heating element application. Assessment level EZ supersedes BS EN :1999 ISBN EPL/40X BS EN :2008 Inrush current application. Assessment level EZ supersedes BS EN :1999 ISBN EPL/40X BS EN :2008 Sensing application. Assessment level EZ supersedes BS EN :1999 ISBN EPL/40X BS EN 60749: Semiconductor devices. Mechanical and climatic test methods BS EN :2008 Soft error test method for semiconductor devices with memory ISBN EPL/47 BS EN 61158: Industrial communication networks. Fieldbus specifications BS EN : Application layer service definition BS EN :2008 Type 2 elements supersedes BS EN :2004 which remains current ISBN members, non-members BS EN :2008 Type 3 elements supersedes BS EN :2004 which remains current ISBN members, non-members BS EN :2008 Type 4 elements supersedes BS EN :2004 which remains current ISBN members, non-members BS EN :2008 Type 5 elements supersedes BS EN :2004 which remains current ISBN members, non-members 14 Prices may be subject to change. Update Standards Aug 2008

9 BS EN :2008 Type 7 elements supersedes BS EN :2004 which remains current ISBN members, non-members BS EN :2008 Type 8 elements supersedes BS EN :2004 which remains current ISBN members, non-members BS EN :2008 Type 17 elements supersedes BS EN :2004 which remains current ISBN members, non-members BS EN :2008 Type 8 elements supersedes BS EN :2004 which remains current ISBN members, non-members BS EN :2008 Type 9 elements supersedes BS EN :2004 which remains current ISBN members, non-members BS EN : Application layer protocol specification BS EN :2008 Type 2 elements supersedes BS EN :2004 which remains current ISBN members, non-members BS EN :2008 Type 3 elements supersedes BS EN :2004 which remains current ISBN members, non-members BS EN :2008 Type 4 elements supersedes BS EN :2004 which remains current ISBN members, non-members BS EN :2008 Type 5 elements supersedes BS EN :2004 which remains current ISBN members, non-members BS EN :2008 Type 7 elements supersedes BS EN :2004 which remains current ISBN members, non-members BS EN :2008 Type 9 elements supersedes BS EN :2004 which remains current ISBN members, non-members BS EN :2008 Type 10 elements supersedes BS EN :2004 which remains current ISBN members, non-members BS EN :2008 Type 11 elements supersedes BS EN :2004 which remains current ISBN members, non-members BS EN :2008 Type 12 elements supersedes BS EN :2004 which remains current ISBN members, non-members BS EN :2008 Type 13 elements supersedes BS EN :2004 which remains current ISBN members, non-members BS EN :2008 Type 14 elements supersedes BS EN :2004 which remains current ISBN members, non-members BS EN :2008 Type 15 elements supersedes BS EN :2004 which remains current ISBN members, non-members BS EN :2008 Type 18 elements supersedes BS EN :2004 which remains current ISBN members, non-members BS EN :2008 Type 19 elements supersedes BS EN :2004 which remains current ISBN BS EN :2008 Type 20 elements supersedes BS EN :2004 which remains current ISBN members, non-members BS EN 61557: Electrical safety in low voltage distribution systems up to 1000 V A.C. and 1500 V D.C. Equipment for testing, measuring or monitoring of protective measures BS EN :2008 Performance measuring and monitoring devices (PMD) ISBN members, non-members PEL/85 BS EN 61800: Adjustable speed electrical power drive systems BS EN : Generic interface and use of profiles for power drive systems BS EN :2008 Profile type 1 specification ISBN members, non-members PEL/22 BS EN :2008 Profile type 2 specification ISBN members, non-members PEL/22 Update Standards Aug 2008 Prices may be subject to change. 15

10 BS EN Publications continued... BS EN :2008 Profile type 3 specification ISBN members, non-members PEL/22 BS EN 61995: Devices for the connection of luminaires for household and similar purposes BS EN :2008 General requirements ISBN members, non-members PEL/23 BS EN 62271: High-voltage switchgear and controlgear BS EN :2008 Compact switchgear assemblies for rated voltages above 52 kv ISBN PEL/17/1 BS ENs IMPLEMENTED BY AMENDMENT For the standards listed below see also the Amendments to British Standards and Updated British Standards sections of this issue of Update Standards. BS EN ISO 11303:2008 Corrosion of metals and alloys. Guidelines for selection of protection methods against atmospheric corrosion ISE/NFE/8 Implementation of European Standard EN ISO by amendment to BS ISO 11303:2002. BS EN ISO 15324:2008 Corrosion of metals and alloys. Evaluation of stress corrosion cracking by the drop evaporation test ISE/NFE/8 Implementation of European Standard EN ISO by amendment to BS ISO 15324:2000. BS EN ISO 16701:2008 Corrosion of metals and alloys. Corrosion in artificial atmosphere. Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution ISE/NFE/8 Implementation of European Standard EN ISO by amendment to BS ISO 16701:2003. BS EN ISO 17081:2008 Method of measurement of hydrogen permeation and determination of hydrogen uptake and transport in metals by an electrochemical technique ISE/NFE/8 Implementation of European Standard EN ISO by amendment to BS ISO 17081:2004. Also incorporates Corrigendum 1. BS EN ISO 17475:2008 Corrosion of metals and alloys. Electrochemical test methods. Guidelines for conducting potentiostatic and potentiodynamic polarization measurements ISE/NFE/8 Implementation of European Standard EN ISO by amendment to BS ISO 17475:2005. Also incorporates Corrigendum 1. BS EN ISO 17852:2008 (BS :2006) Water quality. Determination of mercury. Method using a combined preservation and digestion step followed by atomic fluorescence spectrometry EH/3/2 Implementation of European Standard EN ISO by amendment to BS ISO 17852:2006. BS EN ISO 17864:2008 Corrosion of metals and alloys. Determination of the critical pitting temperature under potientiostatic control ISE/NFE/8 Implementation of European Standard EN ISO by amendment to BS ISO 17864:2005. BS EN ISO 19131:2008 Geographic information. Data product specifications IST/36 Implementation of European Standard EN ISO by amendment to BS ISO 19131:2007. BS EN ISO 22829:2008 Resistance welding. Transformer-rectifier for welding guns with integrated transformers. Transformer-rectifier units operating at 1000 Hz frequency WEE/29 Implementation of European Standard EN ISO by amendment to BS ISO 22829:2007. BS EN 60861:2008 Equipment for monitoring of radionuclides in liquid effluents and surface waters NCE/2 Implementation of European Standard EN by amendment to BS IEC 60861:2006. BS IMPLEMENTATIONS BS Implementations comprise the ISO or IEC text without any national deviation and with front and back cover indicating the UK committee responsible. No other information will normally be added. Note: The date referenced in the identifier is the date of the international standard. BS ISO 517:2008 Photography. Apertures and related properties pertaining to photographic lenses. Designations and measurements ISBN CPW/172/1 BS ISO 1003:2008 Spices. Ginger (Zingiber officinale Roscoe). Specification supersedes BS :1996 ISBN AW/7 BS ISO 3976:2006 Milk fat. Determination of peroxide value ISBN AW/5 BS EN ISO 16151:2008 Corrosion of metals and alloys. Accelerated cyclic tests with exposure to acidified salt spray, dry and wet conditions ISE/NFE/8 Implementation of European Standard EN ISO by amendment to BS ISO 16151:2005. BS EN ISO 19137:2008 Geographic information. Core profile of the spatial schema IST/36 Implementation of European Standard EN ISO by amendment to BS ISO 19137: your order orders@bsigroup.com 16 Prices may be subject to change. Update Standards Aug 2008

11 BS ISO 6571:2008 Spices, condiments and herbs. Determination of volatile oil content (hydrodistillation method) supersedes BS :1985 ISBN AW/7 BS ISO 7176: Wheelchairs BS ISO :2008 Power and control systems for electrically powered wheelchairs and scooters. Requirements and test methods supersedes BS ISO :1997 ISBN members, non-members CH/173/1 BS ISO/IEC 7811: Identification cards. Recording technique BS ISO/IEC :2008 Magnetic stripe. High coercivity ISBN members, non-members IST/17 BS ISO 9129:2008 Motorcycles. Measurement methods for moments of inertia ISBN AUE/14 BS ISO 10998:2008 Agricultural tractors. Requirements for steering supersedes BS ISO 10998:1995 ISBN AGE/6 BS ISO 11085:2008 Cereals, cereals-based products and animal feeding stuffs. Determination of crude fat and total fat content by the Randall extraction method ISBN AW/4 BS ISO 12637: Graphic technology. Vocabulary BS ISO :2008 Postpress terms ISBN PAI/43 BS ISO/IEC 14143: Information technology. Software measurement. Functional size measurement BS ISO/IEC :2007 Definition of concepts supersedes BS ISO/IEC :1998 ISBN IST/15 BS ISO 15686: Buildings and constructed assets. Service-life planning BS ISO :2008 Life cycle costing ISBN members, non-members B/500/3 BS ISO 15740:2008 Photography. Electronic still picture imaging. Picture transfer protocol (PTP) for digital still photography devices supersedes BS ISO 15740:2005 ISBN members, non-members CPW/42 BS ISO 15819:2008 Cosmetics. Analytical methods. Nitrosamines. Detection and determination of N- nitrosodiethanolamine (NDELA) in cosmetics by HPLC-MS-MS ISBN CW/217 BS ISO 15930: Graphic technology. Prepress digital data exchange using PDF BS ISO :2008 Partial exchange of printing data using PDF 1.6 (PDF/X-5) ISBN PAI/43 BS ISO/IEC 15944: Information technology. Business Operational View BS ISO/IEC :2008 Identification and referencing of requirements of jurisdictional domains as sources of external constraints ISBN members, non-members IST/40 BS ISO 17792:2006 Milk, milk products and mesophilic starter cultures. Enumeration of citrate-fermenting lactic acid bacteria. Colony-count technique at 25 C ISBN AW/5 BS ISO/IEC 18013: Information technology. Personal identification. ISO-compliant driving licence BS ISO/IEC :2008 Machine-readable technologies ISBN members, non-members IST/17 BS ISO 20481:2008 Coffee and coffee products. Determination of the caffeine content using high performance liquid chromatography (HPLC). Reference method ISBN AW/15 BS ISO 21094:2008 Optics and photonics. Telescopic systems. Specifications for night vision devices ISBN CPW/172 BS ISO 21244:2008 Agricultural equipment. Mechanical connections between towed and towing vehicles. Implement hitch rings and attachment to tractor drawbars ISBN AGE/6 BS ISO 22412:2008 Particle size analysis. Dynamic light scattering (DLS) ISBN LBI/37 BS ISO 23499:2008 Coal. Determination of bulk density ISBN PTI/16 Update Standards Aug 2008 Prices may be subject to change. 17

12 BS Implementations continued... BS ISO 23935:2006 Aircraft. Environmental test procedures for airborne fluid system components. Resistance to fire in designated fire zones ISBN ACE/69 BS IEC 61227:2008 Nuclear power plants. Control rooms. Operator controls supersedes BS 7517:1995 ISBN NCE/8 DD CEN/TS 15511:2008 Postal services. Quality of service. Information available on postal services ISBN SVS/4 BS ISO 24517: Document management. Engineering document format using PDF BS ISO :2008 Use of PDF 1.6 (PDF/E-1) ISBN members, non-members IDT/1/2 BS ISO 24698: Rubber, raw. Determination of bound acrylonitrile content in acrylonitrile-butadiene rubber (NBR) BS ISO :2008 Combustion (Dumas) method ISBN PRI/23 BS ISO :2008 Kjeldahl method ISBN PRI/23 BS ISO 26021: Road vehicles. End-of-life activation of onboard pyrotechnic devices BS ISO :2008 General information and use case definitions ISBN AUE/16 BS ISO/IEC 27005:2008 Information technology. Security techniques. Information security risk management supersedes BS ISO/IEC TR :1998 and BS ISO/IEC TR :2000 ISBN members, non-members IST/33 BS ISO/IEC 38500:2008 Corporate governance of information technology ISBN IST/15 BS IEC 62363:2008 Radiation protection instrumentation. Portable photon contamination meters and monitors ISBN NCE/2 PUBLISHED DOCUMENTS PD ISO/TR 9464:2008 Guidelines for the use of ISO 5167:2003 supersedes BS ISO/TR 9464:1998 ISBN members, non-members CPI/30/2 PD ISO/TR 11330:1997 Determination of volume of water and water level in lakes and reservoirs ISBN CPI/113/1 PD ISO/TR 29846:2008 Tyres, valves and tubes. kpa/psi equivalencies for inflation pressures ISBN AUE/4 PD CLC/TR 62125:2008 Environmental statement specific to TC 20. Electric cables ISBN GEL/20 DRAFTS FOR DEVELOPMENT DD ISO/TS 6733:2006 Milk and milk products. Determination of lead content. Graphite furnace atomic absorption spectrometric method ISBN members, non-members AW/5 DD ISO/TS 22240:2008 Road vehicles. Vehicles safety information model (VSIM) ISBN members, non-members AUE/7 DD ISO/TS 22367:2008 Medical laboratories. Reduction of error through risk management and continual improvement ISBN members, non-members CH/212 DD CLC/TS 50466:2006 Long duration storage of electronic components. Specification for implementation ISBN GEL/107 DD IEC/PAS 61169: Radio-frequency connectors DD IEC/PAS :2008 Sectional specification for CQM series quick lock RF connectors ISBN EPL/46/2 DD IEC/TS 61251:2008 Electrical insulating materials. A.C. voltage endurance evaluation. Introduction supersedes BS 7808:1995 ISBN members, non-members GEL/112 DD IEC/TS 62371:2008 Characteristics of hollow pressurised and unpressurised ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1000 V ISBN PEL/36 18 Prices may be subject to change. Update Standards Aug 2008

13 PUBLICLY AVAILABLE SPECIFICATIONS Publicly Available Specifications (formerly Product Assessment Specifications) are issued to provide an interim document where there is a market need but where a full British or European Standard has yet to be published. PAS 86:2008 Professional inspection, maintenance, cleaning and restoration of textile floor coverings ISBN members, non-members This product is only available in hard copy format. SPECIALIST BOOKS FROM BSI BIP 0020:2008 Securing and Electronic Messages ISBN members, non-members AMENDMENTS TO BRITISH STANDARDS Most amendments are not issued separately. Those that make significant changes to a standard are incorporated into the standard which is re-issued as a new edition (see Updated British Standards ). Amendments which make smaller changes or corrections are available on request, free of charge to past purchasers of the standard. All amendments to date of despatch are included within any main publication when ordered for the first time. The following amendments to British Standards were made available last month. BS 949: Screwing taps BS 949-1:1992 Specification of general dimensions MTE/5 BS 7315:1990+A1:1993 Specification for wrought aluminium and aluminium alloy enclosures for gas-filled highvoltage switchgear and controlgear PEL/17/1 Also incorporates Amendment 1. BS EN 1870: Safety of woodworking machines. Circular sawing machines BS EN :2007 Horizontal beam panel sawing machines MTE/23 BS EN ISO 3093:2007 Wheat, rye and respective flours, durum wheat and durum wheat semolina. Determination of the Falling Number according to Hagberg- Perten AW/4 BS EN ISO 3166: Codes for the representation of names of countries and their subdivisions BS EN ISO :2006 Country codes IDT/2/11 BS EN ISO 5163:2005 (BS :2005) Petroleum products. Determination of knock characteristics of motor and aviation fuels. Motor method PTI/13 BS EN ISO 6009:1994 Hypodermic needles for single use. Colour coding for identification CH/84 BS EN ISO 9999:2007 Assistive products for persons with disability. Classification and terminology CH/173 BS EN ISO 10360: Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM) BS EN ISO :2001 Estimation of errors in computing Gaussian associated features TDW/4 BS EN ISO 12947: Textiles. Determination of the abrasion resistance of fabrics by the Martindale method BS EN ISO :1998 Martindale abrasion testing apparatus TCI/24 BS EN ISO :1998 Determination of specimen breakdown TCI/24 BS EN ISO :1998 Determination of mass loss TCI/24 BS EN 13201: Road lighting BS EN :2003 Calculation of performance CORRIGENDUM 2 CPL/34/8 Also incorporates Corrigendum 1. BS EN ISO 13680:2001 Petroleum and natural gas industries. Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock. Technical delivery conditions PSE/17 BS EN ISO 13703:2000 Petroleum and natural gas industries. Design and installation of piping systems on offshore production platforms CORRIGENDUM 2 PSE/17 Also incorporates Corrigendum 1. DD ENV ISO 14253: Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipments DD ENV ISO :2001 Guide to the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification TDW/4 BS EN ISO 14505: Ergonomics of the thermal environment. Evaluation of thermal environments in vehicles BS EN ISO :2006 Determination of equivalent temperature PH/9/1 BS EN ISO 14978:2006 Geometrical Product Specifications (GPS). General concepts and requirements for GPS measuring equipment TDW/4 Update Standards Aug 2008 Prices may be subject to change. 19

14 Amendments to British Standards continued... BS EN 15333: Respiratory equipment. Open-circuit umbilical supplied compressed gas driving apparatus BS EN :2008 Demand apparatus PH/4/7 DD CEN/TS 15448:2006 Postal services. Open standard interface between image controller and enrichment devices (OCRs, video coding systems, voting systems) SVS/4 BS EN 50393:2006 Test methods and requirements for accessories for use on distribution cables of rated voltage 0,6/1,0 (1,2) kv GEL/20/17 BS EN 60079: Explosive atmospheres BS EN :2007 Equipment protected by oil immersion o GEL/31/17 BS EN 60335: Household and similar electrical appliances. Safety BS EN :2002+A2:2006 General requirements INTERPRETATION SHEET CPL/61 Also incorporates Amendments 1 & 2 and Corrigenda 1, 2 & 3. BS EN :2003+A2:2006 Particular requirements for washing machines CORRIGENDUM 3 CPL/61/14 Also incorporates Amendments 1 & 2 and Corrigenda 1 & 2. BS EN :2005+A1:2006 Particular requirements for electric fence energizers CPL/61/01 Also incorporates Amendments 1 & 11. BS EN 60456:2005 Clothes washing machines for household use. Methods for measuring the performance CPL/59/1 Also incorporates Amendments 1, 2 & 3. BS EN 60601: Medical electrical equipment BS EN :2007 General requirements for basic safety and essential performance. Collateral standard. Usability CH/62/1 BS EN 60898: Electrical accessories. Circuit breakers for overcurrent protection for household and similar installations BS EN :2003+A1:2004 Circuit-breakers for A.C. operation CORRIGENDUM 2 PEL/23/1 Also incorporates Amendments 1 & 11 and Corrigendum 1. BS EN 60915:2007 Capacitors and resistors for use in electronic equipment. Preferred dimensions of shaft ends, bushes and for the mounting of single-hole, bush-mounted, shaft-operated electronic components EPL/40X BS EN 60970:2007 Insulating liquids. Methods for counting and sizing particles GEL/10 BS EN 62305: Protection against lightning BS EN :2006 General principles GEL/81 BS ISO 37:2005 Rubber, vulcanized or thermoplastic. Determination of tensile stress-strain properties PRI/22 BS ISO 5800:1987 Photography. Colour negative films for still photography. Determination of ISO speed CPW/42 BS ISO/TR 9464:1998 Guide to the use of ISO :1991 CPI/30/2 BS ISO 13450:1996 Photography. 110-size cartridge, film and backing paper. Dimensions CPW/42 BS ISO 17484: Plastics piping systems. Multilayer pipe systems for indoor gas installations with a maximum operating pressure up to and including 5 bar (500 kpa) BS ISO :2006 Specifications for systems PRI/88/2 BS ISO 17615:2007 Aluminium and aluminium alloys. Alloyed ingots for remelting. Specifications NFE/35 BS ISO 18283:2006 Hard coal and coke. Manual sampling PTI/16 DD ISO/TS 21872: Microbiology of food and animal feeding stuffs. Horizontal method for the detection of potentially enteropathogenic Vibrio spp. DD ISO/TS :2007 Detection of Vibrio parahaemolyticus and Vibrio cholerae AW/9 UPDATED BRITISH STANDARDS The following standards have been amended and the amendments have been incorporated into an updated standard. NOTE: Updated British Standards must be reordered as the amendments are not available separately. BS 4443: Methods of test for flexible cellular materials BS :1992+A1:2008 Method 17. Determination of tear strength of flexible cellular material with an integral skin AMENDMENT 1 PRI/24 20 Prices may be subject to change. Update Standards Aug 2008

15 BS 5467:1997+A3:2008 Electric cables. Thermosetting insulated, armoured cables for voltages of 600/1000 V and 1900/3300 V AMENDMENT members, non-members GEL/20/17 Also incorporates Amendments 1 & 2. BS 5892: Railway rolling stock material (metric) BS :1987+A2:2008 Specification for steel bars for retaining rings for tyred wheels AMENDMENT 2 RAE/3/-/1 Also incorporates Amendment 1. BS 6724:1997+A3:2008 Electric cables. Thermosetting insulated, armoured cables for voltages of 600/1000 V and 1900/3300 V, having low emission of smoke and corrosive gases when affected by fire AMENDMENT members, non-members GEL/20/17 Also incorporates Amendments 1 & 2. BS 6878:1988+A2:1993 Specification for high-voltage switchgear and controlgear for industrial use. Cast aluminium alloy enclosures or gas-filled high-voltage switchgear and controlgear AMENDMENT 2 PEL/17/1 Also incorporates Amendment 1. BS 8473:2006+A1:2008 Intruder and hold-up alarm systems. Management of false alarms. Code of practice AMENDMENT 1 GW/1 Also incorporates Corrigendum 1. BS EN 285:2006+A1:2008 Sterilization. Steam sterilizers. Large sterilizers AMENDMENT members, non-members LBI/35 BS EN 471:2003+A1:2007 High-visibility warning clothing for professional use. Test methods and requirements AMENDMENT 1 PH/3/7 BS EN 923:2005+A1:2008 Adhesives. Terms and definitions AMENDMENT members, non-members PRI/52 BS EN 1756: Tail lifts. Platform lifts for mounting on wheeled vehicles. Safety requirements BS EN :2001+A1:2008 Tail lifts for goods AMENDMENT members, non-members MHE/12 BS EN 1811:1998+A1:2008 Reference test method for release of nickel from products intended to come into direct and prolonged contact with the skin AMENDMENT 1 STI/53 BS EN 12385: Steel wire ropes. Safety BS EN :2002+A1:2008 Definitions, designation and classification AMENDMENT members, non-members MHE/2 BS EN :2004+A1:2008 Information for use and maintenance AMENDMENT 1 MHE/2 BS EN :2002+A1:2008 Stranded ropes for general lifting applications AMENDMENT 1 MHE/2 BS EN :2003+A1:2008 Spiral ropes for general structural applications AMENDMENT 1 MHE/2 BS EN 12620:2002+A1:2008 Aggregates for concrete AMENDMENT members, non-members B/502 Also incorporates Corrigendum 1. BS EN 13967:2004+A1:2006 Flexible sheets for waterproofing. Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet. Definitions and characteristics AMENDMENT 1 B/546/2 BS EN 13984:2004+A1:2006 Flexible sheets for waterproofing. Plastic and rubber vapour control layers. Definitions and characteristics AMENDMENT 1 B/546/2 BS EN 50136: Alarm systems. Alarm transmission systems and equipment BS EN :1998+A2:2008 General requirements for alarm transmission systems AMENDMENT 2 GW/1/5 Also incorporates Amendment 1. BS EN 55016: Specification for radio disturbance and immunity measuring apparatus and methods BS EN : Radio disturbance and immunity measuring apparatus BS EN :2007+A2:2008 Measuring apparatus AMENDMENT members, non-members GEL/210/12 Also incorporates Amendment 1. BS EN :2007+A1:2008 Ancillary equipment. Radiated disturbances AMENDMENT members, non-members GEL/210/12 Help Us to Help You! Always quote your Customer Number Don t know your number? Contact Customer Services who will be happy to check it for you Update Standards Aug 2008 Prices may be subject to change. 21

16 Updated British Standards continued... BS EN 60335: Household and similar electrical appliances. Safety BS EN :2003+A2:2008 Particular requirements for wet and dry vacuum cleaners, including power brush, for industrial and commercial use AMENDMENT members, non-members CPL/61/10 Also incorporates Amendment 1. BS EN 61058: Switches for appliances BS EN :2002+A2:2008 General requirements AMENDMENT members, non-members EPL/23 Also incorporates Amendment 1. BS EN 61076: Connectors for electronic equipment BS EN :2003+A1:2006 Circular connectors. Detail specification for circular connectors M8 with screw- or snaplocking, M12 with screw-locking for low voltage applications AMENDMENT members, non-members EPL/48 BS ISO 1629:1995+A1:2007 Rubber and lattices. Nomenclature AMENDMENT 1 PRI/10 BS IEC 60287: Electric cables. Calculation of the current rating BS IEC :1994+A2:2006 Thermal resistance. Calculation of thermal resistance AMENDMENT members, non-members GEL/20/16 Also incorporates Amendment 1. Please do not send confirmation of orders placed by telephone as it can lead to duplication BRITISH STANDARDS PROPOSED FOR CONFIRMATION It is BSI policy for every standard to be reviewed by the technical committee responsible not more than five years after publication, to establish whether it is still current and, if it is not, to identify and set in hand appropriate action. Circumstances may lead to an earlier review. Confirmation indicates the continuing currency of a standard. A note of any objections to the proposals below should be sent to Debbie Stead, Head of Committee Service Centre Operations, BSI Head Office, 389 Chiswick High Road, London W4 4AL or via to BSUKoperations.review@bsigroup.com by 30 September, BS 558 and 564:1970 Specifications for nickel anodes, anode nickel and nickel salts for electroplating STI/33 BS 622:1967 Specification for potassium and sodium cyanides for electroplating STI/33 BS 811:1950 Specification for cycle (B.S.C.) threads (formerly known as C.E.I. threads) GME/25 BS 1468:1967 Specification for tin anodes and tin salts for electroplating STI/33 BS 1561:1966 Specification for silver anodes and silver salts for electroplating STI/33 BS 1726: Cylindrical helical springs made from round wire and bar. Guide to methods of specifying, tolerances and testing BS :2002 Extension springs GME/15 BS :2002 Torsion springs GME/15 BS 1872:1984 Specification for electroplated coatings of tin STI/33 BS 2657:1974 Specification for fluoroboric acid and metal fluoroborates for electroplating STI/33 BS 2868:1968 Specification for cadmium anodes and cadmium oxide for electroplating STI/33 BS 3597:1984 Specification for electroplated coatings of 65/35 tin/nickel alloy STI/33 BS 3900: Methods of test for paints BS :1989 General introduction STI/10 BS 4098:1975 Method for the determination of thickness, compression and recovery characteristics of textile floor coverings PRI/3 BS 4223:1989 Methods for determination of constructional details of textile floor coverings with yarn pile PRI/3 BS 4290:1989 Method for specifying electroplated coatings of silver and silver alloys for decorative and protective purposes STI/33 BS 4292: Method for specifying electroplated coatings of gold and gold alloys BS :1989 Gold and gold alloys for decorative and protective purposes STI/33 BS 4493:1969 Specification for copper salts for electroplating STI/33 BS 4682: Methods of test for dimensional stability of textile floor coverings BS :1988 Determination of dimensional changes due to changes in ambient humidity PRI/3 BS :1981 Determination of dimensional changes after exposure to heat PRI/3 22 Prices may be subject to change. Update Standards Aug 2008

17 BS :1981 Determination of dimensional changes after immersion in water PRI/3 BS 4790:1987 Method for determination of the effects of a small source of ignition on textile floor coverings (hot metal nut method) PRI/3 BS 4805:1989 Method for determination of the dimensions of rectangular textile floor coverings PRI/3 BS 5229:1975 Method for determination of tuft withdrawal force of carpets PRI/3 BS 5287:1988 Specification for assessment and labelling of textile floor coverings tested to BS 4790 PRI/3 BS 5315:1991 Hose clamps (worm drive type) for general purpose use (metric series) PSE/6 BS 5325:2001 Installation of textile floor coverings. Code of practice PRI/3 BS 5350: Methods of test for adhesives BS 5350-C5:2002 Determination of bond strength in longitudinal shear for rigid adherends PRI/52 BS 5658:1979 Specification for gold potassium cyanide for electroplating STI/33 BS :1997 Specification for replacement brake blocks GME/25 BS 6137:1982 Specification for electroplated coatings of tin/lead alloys STI/33 BS 6654:1985 Method for determination of the electrical resistivity of textile floor coverings PRI/3 BS 7078:1989 Method for determination of the electrical resistance to earth of an installed textile floor covering PRI/3 BS 7288:1990 Specification for socket outlets incorporating residual current devices (S.R.C.D.s) PEL/23 BS 7445: Description and measurement of environmental noise BS :2003 Guide to quantities and procedures EH/1/3 BS 8100: Lattice towers and masts BS :1986 Guide to the background and use of Part 1 Code of practice for loading B/525/32 BS :1999 Code of practice for strength assessment of members of lattice towers and masts B/525/32 BS :2002 Torsion springs GME/15 BS 4A 4: Specification for test pieces and test methods for metallic materials BS 4A 4-1: Tensile tests BS 4A 4-1.2:1967 Elevated temperature ACE/61 BS 4A 4-1.3:1967 Uninterrupted creep and rupture tests. Metric units ACE/61 BS 6L 16:1985 Specification for sheet and strip of 99% aluminium (temper designation H14 or H24) ACE/61/-/24 BS 6L 17:1985 Specification for sheet and strip of 99% aluminium (temper designation-o) ACE/61/-/24 BS 5L 36:1985 Specification for wire for solid, cold-forged rivets of 99.5% aluminium (not exceeding 10 mm diameter) ACE/61/-/24 BS 7L 37:1989 Specification for wire for solid cold-forged rivets of aluminium-copper-magnesium-siliconmanganese alloy (for use in the solution treated and naturally aged condition) (not exceeding 10 mm diameter) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8) (2014A) ACE/61/-/24 BS 5920:1980 Method for determination of dimensions of textile floor covering test specimens PRI/3 BS 5921:1980 Methods for determination of size, squareness and straightness of edge of textile floor covering tiles PRI/3 BS 6102: Cycles BS :1982 Specification for photometric and physical requirements of reflective devices GME/25 BS :1995 Code of practice for loading of guyed masts B/525/32 BS 8407:2002 Specification for mechanical and spliced joints in conveyor belting for use underground PRI/67 BS 8726: Cylindrical helical springs made from rectangular and square section wire and bar. Guide to calculation and design BS :2002 Compression springs GME/15 BS 4L 54:1986 Specification for tube of 99% aluminium (cold drawn: seamless: tested hydraulically) (not exceeding 12 mm wall thickness) ACE/61/-/24 BS 4L 56:1986 Specification for tube of aluminium-2 1 /4% magnesium alloy (temper designation-o) (seamless: tested hydraulically) (not exceeding 12 mm wall thickness) ACE/61/-/24 BS 4L 59:1985 Specification for sheet and strip of aluminiummanganese alloy (temper designation H16 or H26) ACE/61/-/24 Update Standards Aug 2008 Prices may be subject to change. 23

18 British Standards Proposed for Confirmation continued... BS 3L 63:1971 Specification for tube of aluminium-coppermagnesium-silicon-manganese alloy (solution treated and precipitation treated) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8) ACE/61/-/24 BS 2L 77:1971 Specification for forging stock and forgings of aluminium-copper-magnesium-siliconmanganese alloy (solution treated and precipitation treated) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8) ACE/61/-/24 BS L 118:1975 Specification for tube of aluminiummagnesium-silicon-copper-chromium alloy (solution treated and artificially aged: tested hydraulically) (not exceeding 10 mm thickness) (Mg 1.0, Si 0.6, Cu 0.28, Cr 0.2) ACE/61/-/24 BS L 119:1975 Specification for ingots and castings of aluminium-copper-nickel-manganese-titaniumzirconium-cobalt-antimony alloy (solution treated and artificially aged) (Cu 5.0, Ni 1.5, Mn 0.25, Ti 0.2, Zr 0.2, Co 0.2, Sb 0.2) ACE/61/-/24 BS EN 970:1997 Non-destructive examination of fusion welds. Visual examination WEE/46 BS EN 1792:2003 Welding. Multilingual list of terms for welding and related processes WEE/1 BS EN ISO 9692: Welding and allied processes. Recommendations for joint preparation BS L 105:1971 Specification for tube of aluminium-coppermagnesium-silicon-manganese alloy (solution treated and aged at room temperature) (not exceeding 10 mm wall thickness) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8) ACE/61/-/24 BS 2L 126:1970 Specification for ingots and castings of magnesium-cerium-zinc-zirconium alloy (precipitation treated) (rare earth metals 3.0, Zn 2.3, Zr 0.6) ACE/61/-/24 BS EN ISO :2003 Manual metal-arc welding, gas-shielded metalarc welding, gas welding, TIG welding and beam welding of steels WEE/1 BS L 109:1971 Specification for aluminium-coated sheet and strip of aluminium-copper-magnesiummanganese alloy (solution treated and aged at room temperature) (Cu 4.4, Mg 1.5, Mn 0.6) ACE/61/-/24 BS L 110:1971 Specification for aluminium-coated sheet and strip of aluminium-copper-magnesiummanganese alloy (supplied for solution treatment by the user) (Cu 4.4, Mg 1.5, Mn 0.6) ACE/61/-/24 BS L 113:1971 Specification for sheet and strip of aluminiummagnesium-silicon-manganese alloy (solution treated and precipitation treated) (suitable for welding) (Mg 0.8, Si 1, Mn 0.7) ACE/61/-/24 BS L 114:1971 Specification for tube of aluminiummagnesium-silicon-manganese alloy (solution treated and precipitation treated) (not exceeding 10 mm wall thickness) (suitable for welding) (Mg 0.8, Si 1, Mn 0.7) ACE/61/-/24 BS L 115:1971 Specification for plate of aluminiummagnesium-silicon-manganese alloy (solution treated, controlled stretched and precipitation treated) (not exceeding 25 mm thickness) (suitable for welding) (Mg 0.8, Si 1, Mn 0.7) ACE/61/-/24 BS L 117:1975 Specification for tube of aluminiummagnesium-silicon-copper-chromium alloy (solution treated and artificially aged: not tested hydraulically) (not exceeding 10 mm thickness) (Mg 1.0, Si 0.6, Cu 0.28, Cr 0.2) ACE/61/-/24 BS L 154:1977 Specification for ingots and castings of aluminium-copper-silicon alloy (solution treated and aged at room temperature) (Cu 4, Si 1) ACE/61/-/24 BS L 155:1977 Specification for ingots and castings of aluminium-copper-silicon alloy (solution treated and artificially aged) (Cu 4, Si 1) ACE/61/-/24 BRITISH STANDARDS REVIEWED AND CONFIRMED It is BSI policy for every standard to be reviewed by the technical committee responsible not more than five years after publication, to establish whether it is still current and, if it is not, to identify and set in hand appropriate action. Confirmation indicates the continuing currency of a standard. Where any standard in this list has been amended since publication, confirmation includes all amendments published to date. Reference to a particular amendment indicates that it is published concurrently with the confirmation. BS 7872:2002 Manned security services. Cash-in-transit services (collection and delivery). Code of practice GW/3 BS EN ISO 284:2003 Conveyor belts. Electrical conductivity. Specification and test method PRI/67 BS EN ISO :2003 Clad steels WEE/1 BS EN ISO 9856:2003 Conveyor belts. Determination of elastic modulus PRI/67 BS EN 10056: Specification for structural steel equal and unequal angles BS EN :1999 Dimensions ISE/13 BS EN 10058:2003 Hot rolled flat steel bars for general purposes. Dimensions and tolerances on shape and dimensions ISE/31 BS EN 10059:2003 Hot rolled square steel bars for general purposes. Dimensions and tolerances on shape and dimensions ISE/31 BS EN 10060:2003 Hot rolled round steel bars for general purposes. Dimensions and tolerances on shape and dimensions ISE/31 BS EN 10061:2003 Hot rolled hexagon steel bars for general purposes. Dimensions and tolerances on shape and dimensions ISE/31 24 Prices may be subject to change. Update Standards Aug 2008

19 BS EN 10092: Hot rolled spring steel flat bars BS EN :2003 Flat bars. Dimensions and tolerances on shape and dimensions ISE/31 BS EN :2003 Ribbed and grooved spring leaves. Dimensions and tolerances on shape and dimensions ISE/31 BS EN 13827:2003 Steel cord conveyor belts. Determination of the lateral and vertical displacement of steel cords PRI/67 BS EN 14385:2004 Stationary source emissions. Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, TI and V EH/2/1 BS ISO 125:2003 Natural rubber latex concentrate. Determination of alkalinity PRI/50 BS ISO 126:2005 Natural rubber latex concentrate. Determination of dry rubber content PRI/50 BS ISO 2254:2004 Cloves, whole and ground (powdered). Specification AW/7 BS ISO 2302:2005 Isobutene-isoprene rubber (IIR). Evaluation procedures PRI/50 BS ISO 3899:2005 Rubber. Nitrile latex. Determination of residual acrylonitrile content PRI/50 BS ISO 4659:2003 Styrene-butadiene rubber (carbon black or carbon black and oil masterbatches). Evaluation procedure PRI/50 BS ISO 5794: Rubber compounding ingredients. Silica, precipitated, hydrated BS ISO :2005 Non-rubber tests PRI/50 BS ISO 7663:2005 Halogenated isobutene-isoprene rubber (BIIR and CIIR). Evaluation procedures PRI/50 BS ISO 9136: Abrasive grains. Determination of bulk density BS ISO :2004 Macrogrits MTE/13 BS ISO 15637: Holding fixtures of cylindrical abrasive sleeves BS ISO :2002 Holding fixtures with shank for hand-held grinding machines MTE/13 BS ISO :2002 Holding fixtures for stationary machines MTE/13 BS ISO 21537: Clamping flanges for superabrasive cutting-off wheels. Natural stone BS ISO :2004 Natural stone MTE/13 BS ISO :2004 Building and construction MTE/13 BS ISO 21538:2004 Blanks for superabrasive cutting-off wheels. Mounting and fixing bores. Building construction and civil engineering MTE/13 BS ISO 21870:2005 Rubber compounding ingredients. Carbon black. Determination of high-temperature loss on heating by thermogravimetry PRI/50 BS ISO 22917:2004 Superabrasives. Limit deviations and run out tolerances for grinding wheels with diamond or cubic boron nitride MTE/13 your order orders@bsigroup.com BRITISH STANDARDS PROPOSED FOR DECLARATION OF OBSOLESCENCE Declaration of obsolescence indicates that the standard is not recommended for use in new equipment, but needs to be retained for the servicing of existing equipment that is expected to have a long working life. A note of any objections to the proposals below should be sent to Debbie Stead, Head of Committee Service Centre Operations, BSI Head Office, 389 Chiswick High Road, London W4 4AL or via to BSUKoperations.review@bsigroup.com by 30 September, Unless otherwise stated, the standards below are proposed as re-declaration of obsolescence. BS 442:1950 Specification for terminals for electrical apparatus for railway signalling purposes GEL/9 This standard has been proposed for obsolescence as new equipment is unlikely to be manufactured to this standard, but there is a great deal of equipment in accordance still in service and which will require to be supported for many years to come BS 581:1950 Specification for electrically-driven pointoperating machines for railways GEL/9 This standard has been proposed for obsolescence as new equipment is unlikely to be manufactured to this standard, but there is a great deal of equipment in accordance still in service and which will require to be supported for many years to come BS 697:1986 Specification for rubber gloves for electrical purposes PEL/78 This standard has been proposed for obsolescence as it is no longer relevant. It is superseded by BS EN 60903:1993 BS 1659:1950 Specification for tractive armature direct current neutral track and line relays for railway signalling GEL/9 This standard has been proposed for obsolescence as new equipment is unlikely to be manufactured to this standard, but there is a great deal of equipment in accordance still in service and which will require to be supported for many years to come Update Standards Aug 2008 Prices may be subject to change. 25

20 British Standards Proposed for Obsolescence continued... BS 1745:1951 Specification for alternating-current relays for railway signalling: track relays (double-element, 2-position), line relays (single-element, 2-position) GEL/9 This standard has been proposed for obsolescence as new equipment is unlikely to be manufactured to this standard, but there is a great deal of equipment in accordance still in service and which will require to be supported for many years to come BS 6088:1981 Specification for solid glass beads for use with road marking compounds and for other industrial uses B/510 This standard has been re-proposed for obsolescence for a further period as it is no longer relevant BS 8404:2001 Packaging. Child-resistant packaging. Requirements and testing procedures for nonreclosable packages for pharmaceutical products PKW/0 This standard has been proposed for obsolescence as it is superseded by BS EN 14375:2003. It will be withdrawn when the MHRA regulations 2003 are updated BS HC 404:1977 Specification for chromium-molybdenum alloy cast iron ring pots (suitable for centrifugally cast and sand cast sealing rings, piston rings and cylinder liners) ACE/61/-/15 This standard has been re-proposed for obsolescence for a further period as it is no longer relevant BRITISH STANDARDS DECLARED OBSOLESCENT Declaration of obsolescence indicates that the standard is not recommended for use in new equipment but needs to be retained for the servicing of existing equipment that is expected to have a long working life. Unless otherwise stated, the standards below are re-declared obsolescent for a further period. BS 7825: Calibration of rubber and plastics test equipment BS : Calibration schedules BS :1997 Thermal properties PRI/20 This standard has been declared obsolescent as there are more applicable ISO standards now available BS :1997 Electrical properties PRI/20 This standard has been declared obsolescent as there are more applicable ISO standards now available BS :1997 Mechanical properties of plastics PRI/20 This standard has been declared obsolescent as there are more applicable ISO standards now available BS :1998 Mechanical properties of rubber PRI/20 This standard has been declared obsolescent as there are more applicable ISO standards now available BS :1997 Optical and weathering properties PRI/20 This standard has been declared obsolescent as there are more applicable ISO standards now available BS :1997 Dimensional properties PRI/20 This standard has been declared obsolescent as there are more applicable ISO standards now available BRITISH STANDARDS PROPOSED FOR WITHDRAWAL A note of any objections to these withdrawals should be sent to Debbie Stead, Head of Committee Service Centre Operations, BSI Head Office, 389 Chiswick High Road, London W4 4AL or via to BSUKoperations.review@bsigroup.com by 30 September, Where any standard in this list has been amended since publication, a proposal to withdraw also includes all amendments published to date. BS 196:1961 Specification for protected-type non-reversible plugs, socket-outlets cable-couplers and appliance-couplers with earthing contacts for single phase A.C. circuits up to 250 volts PEL/23 This standard has been proposed for withdrawal as the products have almost been replaced by those manufactured to BS EN :1999 and BS :1999. The sliding earth contact associated with BS 196 products has been found to be less reliable that the pin and socket tube design BS 490: Conveyor and elevator belting BS : Testing for physical properties BS :1983 Introduction PRI/67 This standard has been proposed for withdrawal as it is superseded following the publication of BS EN ISO 14890:2003, BS EN ISO 3289 and various other BS EN ISO test methods BS :1984 Method for determination of tensile strength and elongation at break of rubber covers PRI/67 This standard has been proposed for withdrawal as it is superseded following the publication of BS EN ISO 14890:2003, BS EN ISO 3289 and various other BS EN ISO test methods BS :1984 Method for determination of length of an endless belt PRI/67 This standard has been proposed for withdrawal as it is superseded by BS EN ISO 16851:1994 WITHDRAWN STANDARDS For further information visit withdrawn 26 Prices may be subject to change. Update Standards Aug 2008