STANDARDS February UPDATE. Eurocodes Masterclasses. Online version

Transcription

1 UPDATE STANDARDS February Online version UpdateStandardsOnline 2010 Contents 4 Quick Reference Guide 6 New and revised British Standards 6 BS EN and DD ENV publications 11 British Standard implementations 12 Published Documents 14 Drafts for Development 14 Corrigenda to British Standards 15 Updated British Standards 17 Special Announcements 17 British Standards proposed for confirmation and confirmed 18 British Standards proposed for obsolescence and declared obsolescent 18 British Standards withdrawn Eurocodes Masterclasses 19 British Standards under review 20 New work started 26 Draft British Standards The Eurocodes are coming. Is your business ready? * 32 Documents not issued as DPCs 33 CEN publications 36 CENELEC publications 38 IEC publications 39 ISO publications *See back cover for more information raising standards worldwide

2 Customer Services Your first point of contact 9 am to 5 pm GMT Monday to Friday Call Customer Services now: To purchase standards and publications For further information on standards, publications and our services To find out about BSI Membership To reserve your place on one of our seminars and conferences. Help us give you the best customer service If you have done business with us before, please quote your account number When phoning, always take a note of the name of the Customer Service Advisor you are speaking to If you are responding to literature please quote the reference code. How to order Telephone +44 (0) Website orders@bsigroup.com to place an order info@bsigroup.com to make an enquiry Fax +44 (0) Post BSI Customer Services 389 Chiswick High Road London W4 4AL We welcome all your feedback, please contact us with your comments. Your calls may be recorded and/or monitored to help us improve our service to you. **ATTENTION BSI MEMBERS** If you are a BSI Member you can order on your credit account. Standards and publications may also be ordered via the BSI shop at *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0) BSI British Standards Institution 2010

3 +44 (0) Ecobuild 2 4 March Stand 1537 Come and speak to us. Ecobuild is now the world s biggest event for sustainable design, construction and the built environment. BSI is delighted to be hosting workshops helping delegates comply with standards and to understand the certification and testing process. BSI Affiliates Best practice, safety and professionalism They re yours to pass on with BSI affiliates. By linking to the standards your customers or members need on your website, you ll simplify the process of finding and using standards. And we ll reward you with a generous commission. You ll be providing a valuable service while helping to raise standards in your industry, which is good for everybody. Become a BSI affiliate and Pass it on! Contact: bs.affiliates@bsigroup.com +44 (0) Help us reduce the impact on the environment by using ecommunications You can help BSI British Standards reduce its impact on the environment by signing up to the BSI British Standards newsletters on a range of subjects. Sign up at raising standards worldwide

4 British Standards - Quick Reference Guide The following British Standards are listed or referred to in this issue of Update Standards with the exception of those in New Work Started. Building and civil engineering BS BS BS BS BS BS BS BS , 19 BS DD CEN/TS BS EN BS EN , 19 BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN NA to BS EN NA to BS EN PD PD PAS Consumer products and services BS BS , 18 BS BS BS BS EN ISO BS EN ISO , 18 BS EN ISO BS EN ISO , 14 BS EN BS EN BS EN BS ISO , 15 BS ISO BS ISO BS ISO BS ISO PD CEN/TR Electrotechnical BS BS BS BS BS BS DD CEN ISO/TS BS EN BS EN BS EN BS EN BS EN BS EN BS EN , 15 BS EN BS EN BS EN BS EN , 18 BS EN BS EN BS EN BS EN BS EN BS EN , 18 BS EN BS EN BS EN BS EN BS EN BS IEC Engineering BS BS BS DD CEN/TS BS EN , 14, 18 BS EN BS EN BS EN BS EN BS EN BS EN BS EN , 19 BS EN , 19 BS EN , 19 BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN ISO BS EN BS EN BS EN BS EN BS EN ISO BS EN ISO BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN ISO BS EN BS EN BS EN ISO BS EN BS EN BS EN BS EN ISO , 19 BS EN ISO , 19 BS EN ISO , 19 BS EN , 15 BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS IEC DD ISO/TS PD CEN/TR PD ISO/TR BS B BS 2B Health and environment BS , 18 BS BS EN BS EN ISO BS EN BS EN ISO BS EN BS EN BS EN BS EN BS EN BS EN ISO BS EN ISO , 18 BS EN ISO , 19 BS ISO BS ISO Information systems BS BS EN ISO , 15 BS ISO/IEC BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO/IEC Management systems BS , 19 PD CEN/TR Materials and chemicals BS , 18 BS BS BS , 18 BS EN ISO BS EN ISO BS EN ISO BS EN ISO BS EN ISO , 19 BS EN ISO , 19 BS EN ISO , 19 BS EN ISO BS EN BS EN , 19 BS EN , 19 BS EN , 19 BS EN BS EN BS EN BS EN ISO BS EN ISO BS ISO BS ISO BS ISO , 18 BS ISO BS ISO , 18 BS ISO , 18 BS ISO BS ISO BS ISO BS ISO BS ISO PD CEN/TR PD CEN/TR PD CEN/TR PD CEN/TR Prices may be subject to change. Update Standards Feb 2010

5 Alpha-numeric sequence of British Standards Alpha-numeric sequence of British Standards quoted in this issue BS BS BS BS , 18 BS BS BS BS BS BS BS , 18 BS , 18 BS BS BS , 18 BS BS BS BS BS BS BS BS BS , 19 BS BS BS BS BS BS , 19 BS DD CEN/TS DD CEN/TS DD CEN ISO/TS BS EN BS EN , 14, 18 BS EN ISO BS EN , 19 BS EN ISO BS EN BS EN BS EN BS EN ISO , 18 BS EN BS EN BS EN BS EN BS EN , 19 BS EN , 19 BS EN , 19 BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN ISO BS EN ISO BS EN BS EN BS EN BS EN ISO BS EN ISO BS EN ISO BS EN BS EN ISO , 14 BS EN ISO BS EN ISO BS EN ISO , 19 BS EN ISO , 19 BS EN ISO , 19 BS EN ISO BS EN ISO BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN ISO BS EN ISO BS EN BS EN BS EN BS EN BS EN ISO BS EN BS EN , 19 BS EN , 19 BS EN , 19 BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN BS EN ISO BS EN ISO BS EN ISO , 19 BS EN ISO , 15 BS EN ISO , 18 BS EN ISO , 19 BS EN ISO , 19 BS EN ISO , 19 BS EN ISO BS EN BS EN BS EN BS EN BS EN BS EN BS EN , 15 BS EN BS EN BS EN BS EN , 18 BS EN BS EN BS EN BS EN BS EN BS EN , 18 BS EN BS EN BS EN BS EN , 15 BS EN BS EN BS ISO BS ISO BS ISO BS ISO/IEC BS ISO , 18 BS ISO BS ISO , 15 BS ISO BS ISO , 18 BS ISO BS ISO , 18 BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO BS ISO/IEC BS ISO BS IEC BS IEC DD ISO/TS PD CEN/TR PD CEN/TR PD CEN/TR PD CEN/TR PD CEN/TR PD CEN/TR PD CEN/TR PD PD PD ISO/TR BS B BS 2B PAS PAS PAS NA to BS EN NA to BS EN Update Standards Feb 2010 Prices may be subject to change. 5

6 British Standards BRITISH STANDARDS The following British Standard publications are available from BSI Customer Services (see How to order on page 2). The publications listed below are new and revised British Standards that were made available last month. An existing BSI publication bearing a number identical to one announced below is automatically withdrawn unless stated otherwise. In all other cases of supersession, details are given and a corresponding entry appears in the British Standards withdrawn section. BRITISH STANDARD IMPLEMENTATIONS WILL BE SUPPLIED IN PREFERENCE TO EUROPEAN OR INTERNATIONAL STANDARDS, UNLESS OTHERWISE REQUESTED. Please order by the British Standard reference not the ISBN number. BS 2000 series standards are also available from: Library of the Energy Institute 61 New Cavendish Street London W1G 7AR Tel: Fax: lis@energyinst.org.uk For this series, member pricing is applicable to BSI and Energy Institute members. BS :2009 Flueing and ventilation for gas appliances of rated input not exceeding 70 kw net (1st, 2nd and 3rd family gases). Specification for the installation and maintenance of ventilation provision for gas appliances supersedes BS :2000 ISBN members, non-members GSE/30/-/15 BS 6031:2009 Code of practice for earthworks supersedes BS 6031:1981 which has been declared obsolescent ISBN members, non-members B/526 BS :2009 Head and face protection for cricketers. Face protectors for cricket wicket-keepers ISBN members, non-members PH/6/6 BS :2009 Equipment used in the controlled removal of asbestos-containing materials. Controlled wetting equipment. Specification ISBN members, non-members HS/1 BS :2009 Equipment used in the controlled removal of asbestos-containing materials. Negative pressure units. Specification ISBN members, non-members HS/1 BS :2009 Equipment used in the controlled removal of asbestos-containing materials. Operation, cleaning and maintenance of class H vacuum cleaners. Code of practice ISBN members, non-members HS/1 BS 2B 100:2009 Procedure for inspection, testing and acceptance of wrought copper alloys supersedes BS B 100:1992 ISBN members, non-members ACE/61 NA to BS EN :2007 UK National Annex to Eurocode 7. Geotechnical design. Ground investigation and testing ISBN members, non-members B/526/3 BS EN PUBLICATIONS The following are British Standard implementations of the English language versions of European Standards (ENs). BSI has an obligation to publish all ENs and to withdraw any conflicting British Standards. This has led to a series of standards, BS ENs, using the EN number. Note: The date referenced in the identifier is the date of the European standard. BS EN 46-1:2009 Wood preservatives. Determination of the preventive action against recently hatched larvae of Hylotrupes bajulus (Linnaeus). Application by surface treatment (laboratory method) supersedes BS EN 46-1:2005 ISBN members, non-members B/515 BS EN 46-2:2009 Wood preservatives. Determination of the preventive action against recently hatched larvae of Hylotrupes bajulus (Linnaeus). Ovicidal effect (laboratory method) supersedes BS EN 46-2:2006 ISBN members, non-members B/515 BS EN 81-21:2009 Safety rules for the construction and installation of lifts. Lifts for the transport of persons and goods. New passenger and goods passenger lifts in existing building ISBN members, non-members MHE/4 BS EN ISO 445:2009 Pallets for materials handling. Vocabulary supersedes BS EN ISO 445:1999 ISBN members, non-members PKW/0/-/11 BS EN :2009 Admixtures for concrete, mortar and grout. Test methods. Determination of water soluble chloride content supersedes BS EN :1997 ISBN members, non-members B/517/3 BS EN :2009 Admixtures for concrete, mortar and grout. Test methods. Reference masonry mortar for testing mortar admixtures supersedes BS EN :2002 ISBN members, non-members B/517/3 BS EN 621:2009 Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kw, without a fan to assist transportation of combustion air and/or combustion products supersedes BS EN 621:1998 ISBN members, non-members GSE/20 BS EN ISO 712:2009 Cereals and cereal products. Determination of moisture content. Reference method supersedes BS :1999 ISBN members, non-members AW/4 BS EN :2009 Non-destructive testing. Terminology. Terms used in acoustic emission testing supersedes BS EN :2000 ISBN members, non-members WEE/46 6 Prices may be subject to change. Update Standards Feb 2010

7 New standard BS 8901:2009 Specification for a sustainability management system for events BS 8901 provides requirements for planning and managing sustainable events of all sizes and types. BS 8901 covers the entire range of events ranging from large-scale conferences and unique events such as the 2012 Olympics to music festivals and air shows. BS 8901 applies to: Event organizers Venues Organizations and/or individuals in the supply chain. BS 8901 provides guidance in the form of easy to understand practical information designed to assist the user to implement the requirements and those in event management to manage their environmental, financial and social risks and impacts spanning all aspects of event management. BS 8901 will: Help companies to improve sustainable performance within available budgets Reduce carbon emissions and waste, improving the resource efficiency of the entire event supply chain Present opportunities for more efficient planning and encourage the re-use of equipment and infrastructure. Reduce environmental impacts such as carbon usage, waste management and effects on biodiversity Improve social impacts such as community involvement and fair employment Establish economic impacts such as local investment and long-term viability. BS 8901 case studies also available See case studies from Google, Olympia, Reed and other organizations on how they used BS To buy online visit or contact BSI Customer Services quoting marketing reference code 8901B-U Tel +44 (0) Fax +44 (0) orders@bsigroup.com raising standards worldwide Standards and publications may also be ordered via the BSI shop at *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0) BSI British Standards Institution 2010

8 BS EN Publications continued... BS EN 1349:2009 Industrial process control valves supersedes BS EN 1349:2000 ISBN members, non-members PSE/18/4 BS EN 1539:2009 Dryers and ovens, in which flammable substances are released. Safety requirements supersedes BS EN 1539:2000 ISBN members, non-members MCE/3/8 BS EN :2009 High efficiency air filters (EPA, HEPA and ULPA). Classification, performance testing, marking supersedes BS EN :1998 ISBN members, non-members MCE/21/3 BS EN :2009 High efficiency air filters (EPA, HEPA and ULPA). Testing flat sheet filter media supersedes BS EN :1998 ISBN members, non-members MCE/21/3 BS EN 1859:2009 Chimneys. Metal chimneys. Test methods supersedes BS EN 1859:2000 ISBN members, non-members B/506/5 BS EN :2009 Aerospace series. Lamps, incandescent. Main characteristics ISBN members, non-members ACE/6 BS EN :2009 Aerospace series. Lamps, incandescent. Lamp, code 73. Product standard ISBN members, non-members ACE/6 BS EN :2009 Aerospace series. Lamps, incandescent. Lamp, code 73E. Product standard ISBN members, non-members ACE/6 BS EN :2009 Aerospace series. Lamps, incandescent. Lamp, code 74. Product standard ISBN members, non-members ACE/6 BS EN :2009 Aerospace series. Lamps, incandescent. Lamp, code 75. Product standard ISBN members, non-members ACE/6 BS EN :2009 Aerospace series. Lamps, incandescent. Lamp, code 83. Product standard ISBN members, non-members ACE/6 BS EN ISO :2009 Mechanical properties of corrosion-resistant stainless steel fasteners. Bolts, screws and studs supersedes BS EN ISO :1998 ISBN members, non-members FME/9/1 BS EN ISO :2009 Mechanical properties of corrosion-resistant stainless steel fasteners. Set screws and similar fasteners not under tensile stress supersedes BS EN ISO :1998 ISBN members, non-members FME/9/1 BS EN ISO :2009 Mechanical properties of corrosion-resistant stainless steel fasteners. Tapping screws supersedes BS EN ISO :2003 ISBN members, non-members FME/9/1 BS EN :2009 Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Cable outlet, style A, straight, unsealed with clamp strain relief for EN 2997 and EN Product standard supersedes BS EN :2006 ISBN members, non-members ACE/6 BS EN :2009 Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Cable outlet, style A, 90º, unsealed with clamp strain relief for EN 2997 and EN Product standard supersedes BS EN :2006 ISBN members, non-members ACE/6 To order visit BS EN 4178:2009 Aerospace series. Screws, pan head, six lobe recess, coarse tolerance normal shank, medium length thread, in titanium alloy, anodized, MoS2 lubricated MPa (at ambient temperature)/315ºc ISBN members, non-members ACE/12 BS EN 4179:2009 Aerospace series. Qualification and approval of personnel for non-destructive testing supersedes BS EN 4179:2005 ISBN members, non-members ACE/1 BS EN :2009 Aerospace series. Electrical cables, installation. Protection sleeve in meta-aramid fibres. Braided, tubular, expandable. Product standard ISBN members, non-members ACE/6 BS EN ISO :2009 Plastics. Polybutene-1 (PB-1) moulding and extrusion materials. Designation system and basis for specifications supersedes BS EN ISO :1999 ISBN members, non-members PRI/82 BS EN ISO :2009 Plastics. Polybutene-1 (PB-1) moulding and extrusion materials. Preparation of test specimens and determination of properties supersedes BS EN ISO :1996 ISBN members, non-members PRI/82 BS EN ISO 10547:2009 Polyester fibre ropes. Double braid construction supersedes BS EN 14684:2004 ISBN members, non-members TCI/77 BS EN ISO 10556:2009 Fibre ropes of polyester/polyolefin dual fibres supersedes BS EN 14686:2004 ISBN members, non-members TCI/77 BS EN ISO 10572:2009 Mixed polyolefin fibre ropes supersedes BS EN 14687:2004 ISBN members, non-members TCI/77 8 Prices may be subject to change. Update Standards Feb 2010

9 New standard BS 8102:2009 Code of practice for protection of below ground structures against water from the ground BS 8102 gives recommendations and provides guidance on methods of dealing with and preventing the entry of water from surrounding ground into a structure below ground level. BS 8102 covers the use of: a) Waterproofing barrier materials applied to the structure b) Structurally integral watertight construction c) Drained cavity construction. It also covers the evaluation of groundwater conditions, risk assessment and options for drainage outside the structure. It applies to structures which extend below ground level and those on sloping sites. This is a full revision of the standard, and includes the following changes: a) A number of recent developments are addressed, which are important when specifying, designing and constructing below ground structures, including: 1) More deep construction in congested urban areas 2) An increase in the provision of residential basements 3) Development and use of new materials for waterproofing. b) A more detailed assessment is provided of the risks in below ground construction and how these might best be addressed. BS 8102:2009 replaces BS 8102:1990, which is now withdrawn. Buy at The publication of the Eurocodes and the withdrawal of the corresponding British Standards make the revision of BS 8102 very timely. Read more about Eurocodes at Construction Newsletter Sign up to the Construction and Built Bnvironment newsletter for regular updates on new standards, books and events To subscribe visit or contact BSI Customer Services quoting marketing reference code 8102B-U Tel +44 (0) Fax +44 (0) orders@bsigroup.com raising standards worldwide Standards and publications may also be ordered via the BSI shop at *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0) BSI British Standards Institution 2010

10 BS EN Publications continued... BS EN ISO 11545:2009 Agricultural irrigation equipment. Centre-pivot and moving lateral irrigation machines with sprayer or sprinkler nozzles. Determination of uniformity of water distribution supersedes BS EN ISO 11545:2001 ISBN members, non-members AGE/30 BS EN 12622:2009 Safety of machine tools. Hydraulic press brakes supersedes BS EN 12622:2001 ISBN members, non-members MTE/1/1 BS EN 12982:2009 Industrial valves. End-to-end and centre-to-end dimensions for butt welding end valves supersedes BS EN 12982:2000 ISBN members, non-members PSE/18/1 BS EN 13029:2009 Packaging. Light-gauge metal packaging. Apertures for plug-in plastic closures supersedes BS EN 13029:2001 ISBN members, non-members PKW/0/-/8 BS EN ISO :2009 Petroleum and natural gas industries. Drilling and production equipment. Design and operation of marine drilling riser equipment ISBN members, non-members PSE/17/-/4 BS EN 14306:2009 Thermal insulation products for building equipment and industrial installations. Factory made calcium silicate (CS) products. Specification ISBN members, non-members B/540/6 BS EN ISO 14343:2009 Welding consumables. Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels. Classification supersedes BS EN ISO 14343:2007 ISBN members, non-members WEE/39 BS EN 15228:2009 Structural timber. Structural timber preservative treated against biological attack ISBN members, non-members B/518 BS EN 15618:2009 Rubber- or plastic-coated fabrics. Upholstery fabrics. Classification and methods of test ISBN members, non-members TCI/69 BS EN :2009 Floating leisure articles for use on and in the water. Classification, materials, general requirements and test methods ISBN members, non-members SW/136 BS EN :2009 Floating leisure articles for use on and in the water. Consumer information ISBN members, non-members SW/136 BS EN :2009 Floating leisure articles for use on and in the water. Additional specific safety requirements and test methods for Class A devices ISBN members, non-members SW/136 BS EN :2009 Floating leisure articles for use on and in the water. Additional specific safety requirements and test methods for Class C devices ISBN members, non-members SW/136 BS EN :2009 Floating leisure articles for use on and in the water. Additional specific safety requirements and test methods for Class D devices ISBN members, non-members SW/136 BS EN :2009 Floating leisure articles for use on and in the water. Additional specific safety requirements and test methods for Class E devices ISBN members, non-members SW/136 BS EN :2009 Agricultural tractors and self-propelled sprayers. Protection of the operator (driver) against hazardous substances. Filters, requirements and test procedures ISBN members, non-members AGE/6 BS EN 15708:2009 Water quality. Guidance standard for the surveying, sampling and laboratory analysis of phytobenthos in shallow running water ISBN members, non-members EH/3/5 BS EN 15715:2009 Thermal insulation products. Instructions for mounting and fixing for reaction to fire testing. Factory made products ISBN members, non-members B/540 BS EN 15773:2009 Industrial application of powder organic coatings to hot dip galvanized or sherardized steel articles [duplex systems]. Specifications, recommendations and guidelines ISBN members, non-members STI/27 BS EN 15841:2009 Ambient air quality. Standard method for determination of arsenic, cadmium, lead and nickel in atmospheric deposition ISBN members, non-members EH/2/3 BS EN ISO 16061:2009 Instrumentation for use in association with nonactive surgical implants. General requirements supersedes BS EN ISO 16061:2008 ISBN members, non-members CH/150 BS EN ISO 17638:2009 Non-destructive testing of welds. Magnetic particle testing supersedes BS EN 1290:1998 ISBN members, non-members WEE/46 BS EN ISO 21987:2009 Ophthalmic optics. Mounted spectacle lenses supersedes BS :1998 which remains current ISBN members, non-members CH/172/3 BS EN ISO 23277:2009 Non-destructive testing of welds. Penetrant testing of welds. Acceptance levels supersedes BS EN 1289:1998 ISBN members, non-members WEE/46 10 Prices may be subject to change. Update Standards Feb 2010

11 BS EN ISO 23278:2009 Non-destructive testing of welds. Magnetic particle testing of welds. Acceptance levels supersedes BS EN 1291:1998 ISBN members, non-members WEE/46 BS EN ISO 27587:2009 Leather. Chemical tests. Determination of the free formaldehyde in process auxiliaries ISBN members, non-members TCI/69 BS EN :2009 Environmental testing. Tests. Test Z/AD. Composite temperature/humidity cyclic test supersedes BS EN :1999 ISBN members, non-members GEL/104 BS EN :2009 Household and similar electrical appliances. Safety. Particular requirements for floor treatment and floor cleaning machines for commercial use supersedes BS EN :2003 ISBN members, non-members CPL/61/10 BS EN :2009 Household and similar electrical appliances. Safety. Particular requirements for spray extraction machines for commercial use supersedes BS EN :2003 ISBN members, non-members CPL/61/10 BS EN :2009 Household and similar electrical appliances. Safety. Particular requirements for wet and dry vacuum cleaners, including power brush, for commercial use supersedes BS EN :2003+A2:2008 ISBN members, non-members CPL/61/10 BS EN :2009 Household and similar electrical appliances. Safety. Particular requirements for automatic machines for floor treatment for commercial use supersedes BS EN :1999 ISBN members, non-members CPL/61/10 BS EN :2009 Household and similar electrical appliances. Safety. Particular requirements for high pressure cleaners and steam cleaners supersedes BS EN :2004 ISBN members, non-members CPL/61/10 BS ENs IMPLEMENTED BY AMENDMENT For the standards listed below see also the Amendments to British Standards and Updated British Standards sections of this issue of Update Standards. BS EN ISO 6571:2009 Spices, condiments and herbs. Determination of volatile oil content (hydrodistillation method) AW/7 Implementation of European Standard EN ISO 6571 by amendment to BS ISO 6571:2008 BS EN ISO 19141:2009 Geographic information. Schema for moving features IST/36 Implementation of European Standard EN ISO by amendment to BS ISO 19141:2008 BS EN 62138:2009 Nuclear power plants. Instrumentation and control important for safety. Software aspects for computer-based systems performing category B or C functions NCE/8 Implementation of European Standard EN by amendment to BS IEC 62138:2004 BS IMPLEMENTATIONS BS Implementations comprise the ISO or IEC text without any national deviation and with front and back cover indicating the UK committee responsible. No other information will normally be added. Note: The date referenced in the identifier is the date of the international standard. BS ISO 2393:2008 Rubber test mixes. Preparation, mixing and vulcanization. Equipment and procedures supersedes BS 903-A64:1995 ISBN members, non-members PRI/22 BS ISO 3375:2009 Textile glass. Determination of stiffness of rovings ISBN members, non-members PRI/42 BS ISO 3417:2008 Rubber. Measurement of vulcanization characteristics with the oscillating disc curemeter supersedes BS 903-A60.2:1992 ISBN members, non-members PRI/22 BS ISO :2008 Plastics. Determination of dynamic mechanical properties. Tensile vibration. Non-resonance method supersedes BS :Method 323A:1996 ISBN members, non-members PRI/21 BS ISO 9362:2009 Banking. Banking telecommunication messages. Business identifier code (BIC) supersedes BS ISO 9362:1994 ISBN members, non-members IST/12 BS ISO 10704:2009 Water quality. Measurement of gross alpha and gross beta activity in non-saline water. Thin source deposit method ISBN members, non-members EH/3 BS ISO 10874:2009 Resilient, textile and laminate floor coverings. Classification ISBN members, non-members PRI/3/60 BS ISO :2009 Road vehicles. Circuit breakers. Definitions and general test requirements ISBN members, non-members AUE/16 BS ISO :2009 Road vehicles. Circuit breakers. Medium circuit breakers with tabs (Blade type), Form CB15 ISBN members, non-members AUE/16 BS ISO 11053:2009 Vegetable fats and oils. Determination of cocoa butter equivalents in milk chocolate ISBN members, non-members AW/307 Update Standards Feb 2010 Prices may be subject to change. 11

12 BS Implementations continued... BS ISO 11649:2009 Financial services. Core banking. Structured creditor reference to remittance information ISBN members, non-members IST/12 BS ISO :2009 Connections for hydraulic fluid power and general use. Hose fittings. Hose fittings with ISO º cone ends ISBN members, non-members MCE/18/-/4 BS ISO :2009 Implants for surgery. Wear of total knee-joint prostheses. Loading and displacement parameters for wear-testing machines with load control and corresponding environmental conditions for test supersedes BS ISO :2002 ISBN members, non-members CH/150/4 BS ISO :2009 Certificate management for financial services. Public key certificates ISBN members, non-members IST/12 BS ISO :2008 Condition monitoring and diagnostics of machines. Requirements for qualification and assessment of personnel. Field lubricant analysis ISBN members, non-members GME/21/7 BS ISO :2008 Condition monitoring and diagnostics of machines. Requirements for qualification and assessment of personnel. Acoustic emission ISBN members, non-members GME/21/7 BS ISO :2008 Condition monitoring and diagnostics of machines. Requirements for qualification and assessment of personnel. Thermography ISBN members, non-members GME/21/7 BS ISO 20292:2009 Materials for the production of primary aluminium. Dense refractory bricks. Determination of cryolite resistance ISBN members, non-members CII/24 BS ISO 22769:2009 Oil of Australian sandalwood (Santalum spicatum (R.Br.) A.DC.) ISBN members, non-members AW/54 BS ISO :2009 Milk and milk products. Sensory analysis. General guidance for the recruitment, selection, training and monitoring of assessors ISBN members, non-members AW/5 BS ISO :2009 Milk and milk products. Sensory analysis. Recommended methods for sensory evaluation ISBN members, non-members AW/5 BS ISO :2009 Machine tools. Ball splines. General characteristics and requirements ISBN members, non-members MTE/1 BS ISO :2009 Machine tools. Ball splines. Dynamic and static load ratings and rating life ISBN members, non-members MTE/1 BS ISO 24538:2008 Plastics. Homopolymer and copolymer resins of vinyl chloride. Determination of residual vinyl chloride monomer by gas-chromatographic analysis of dry powder ISBN members, non-members PRI/21 BS ISO/IEC 24734:2009 Information technology. Office equipment. Method for measuring digital printer productivity ISBN members, non-members IST/3 BS ISO 28981:2009 Mopeds. Methods for setting the running resistance on a chassis dynamometer ISBN members, non-members AUE/14 BS ISOs IMPLEMENTED BY AMENDMENT For the standards listed below see also the Amendment to British Standards and Updated British Standards sections of this issue of Update Standards. BS ISO 3308:2000+A1:2009 Routine analytical cigarette-smoking machine. Definitions and standard conditions AW/40 Implementation of International Standard ISO 3308 by amendment to BS :2000 PUBLISHED DOCUMENTS PD CEN/TR 115-3:2009 Safety of escalators and moving walks. Correlation between EN 115:1995 and its amendments and EN 115-1:2008 ISBN members, non-members MHE/4 PD CEN/TR :2009 Office furniture. Office work chair. Clarifications to EN :2000 (Dimensions) ISBN members, non-members FW/0/3 PD :2009 Structural use of aluminium. Recommendations for the design of aluminium structures to BS EN 1999 ISBN members, non-members B/525/9 PD :2009 Structural use of steel and aluminium. Recommendations for the execution of aluminium structures to BS EN ISBN members, non-members B/525/9 PD CEN/TR 15735:2008 Postal services. Quality of service. Distance to access points ISBN members, non-members SVS/4 PD CEN/TR 15951:2009 Pyrotechnic articles. Fireworks, category 4. Overview of harmonized standards that will be developed by CEN/TC 212/WG 2 ISBN members, non-members CII/47 12 Prices may be subject to change. Update Standards Feb 2010

13 Have you visited the Nanotechnology website? BSI has developed a microsite dedicated to Nantechnologies standards development. Here you will find a wealth of information covering: Ten free downloads for nano guidance, terminology and use Nano publications to buy Standards development and committee activity Nanotechnology news - regularly updated Links for further reading Why not bookmark it now? Key standard for nanotechnology: PD ISO/TR 12885:2008 Nanotechnologies. Health and safety practices in occupational settings relevant to nanotechnologies Read more and buy at shop.bsigroup.com/pdisotr12885 To order please contact BSI Customer Services quoting marketing reference NANOB-U Tel +44 (0) Fax +44 (0) orders@bsigroup.com Standards and publications may also be ordered via the BSI shop at *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0) BSI British Standards Institution 2010 Have you visited the Biometrics website? BSI has developed a microsite dedicated to Biometrics standards development. Here you will find a wealth of information covering: How do biometric systems work? Why use biometrics? How are biometrics used? Privacy issues and biometrics Biometrics publications Standards development Biometrics news - regularly updated Why not bookmark it now? Recently published for biometrics: BS ISO/IEC :2009 Information technology. Biometric sample quality. Framework Read more and buy at shop.bsigroup.com/bsisoiec To order please contact BSI Customer Services quoting marketing reference BIOMB-U Tel +44 (0) Fax +44 (0) orders@bsigroup.com Standards and publications may also be ordered via the BSI shop at *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0) BSI British Standards Institution 2010

14 Published Documents continued... PD CEN/TR 15952:2009 Pyrotechnic articles. Theatrical pyrotechnic articles, categories T1 and T2. Overview of harmonized standards that will be developed by CEN/TC 212/WG 3 ISBN members, non-members CII/47 PD CEN/TR 15953:2009 Pyrotechnic articles. Other pyrotechnic articles, category P1 and P2. Overview of harmonized standards that will be developed by CEN/TC 212/WG 5 ISBN members, non-members CII/47 PD CEN/TR 15970:2009 Pyrotechnic articles. Pyrotechnic articles for vehicles. Overview on work program for EN standards to be developed by CEN/TC 212 WG 4 ISBN members, non-members CII/47 DRAFTS FOR DEVELOPMENT DD CEN/TS 81-83:2009 Safety rules for the construction and installation of lifts. Existing lifts. Rules for the improvement of the resistance against vandalism ISBN members, non-members MHE/4 DD CEN ISO/TS 12813:2009 Electronic fee collection. Compliance check communication for autonomous systems ISBN members, non-members EPL/278 DD CEN/TS :2009 Road and airfield surface characteristics. Procedure for determining the skid resistance of a pavement surface by measurement of the sideway force coefficient (SFCS). SCRIM ISBN members, non-members B/510/5 DD CEN/TS :2009 Road and airfield surface characteristics. Procedure for determining the skid resistance of a pavement surface using a device with longitudinal fixed slip ratio (LFCG). The GripTester ISBN members, non-members B/510/5 DD ISO/TS 20100:2008 Gaseous hydrogen. Fuelling stations ISBN members, non-members PVE/3/8 CORRIGENDA TO BRITISH STANDARDS Most amendments are not issued separately. Those that make significant changes to a standard are incorporated into the standard which is reissued (see Updated British Standards ). British Standards which have been corrected via corrigenda are available on request, free of charge to past purchasers of the standard. All amendments and corrigenda to date of despatch are included within any main publication when ordered for the first time. The following corrigenda to British Standards were made available last month. BS 887:2008 Precision vernier callipers. Requirements and test methods CORRIGENDUM 2 TDW/4 Also incorporates Corrigenda 1 BS :2006 Industrial type flooring and stair treads. Metal open bar gratings. Specification B/208 BS EN 81-40:2008 Safety rules for the construction and installation of lifts. Special lifts for the transport of persons and goods. Stairlifts and inclined lifting platforms intended for persons with impaired mobility MHE/4 BS EN :2005 Eurocode 1. Actions on structures. General actions. Wind actions B/525/1 BS EN :2005 Eurocode 6. Design of masonry structures. General rules for reinforced and unreinforced masonry structures CORRIGENDUM 2 B/525/6 Also incorporates Corrigenda 1 BS EN ISO :2003 Textiles. Professional care, drycleaning and wetcleaning of fabrics and garments. Procedure for testing performance when cleaning and finishing using simulated wetcleaning TCI/82 BS EN ISO 4823:2000+A1:2007 Dentistry. Elastomeric impression materials CH/106/2 Also incorporates Amendment 1 BS EN ISO 6571:2009 Spices, condiments and herbs. Determination of volatile oil content (hydrodistillation method) AW/7 BS EN ISO :2008 Petroleum and natural gas industries. Rotary drilling equipment. Inspection and classification of used drill stem elements PSE/17/-/4 BS EN ISO 11337:2004 Plastics. Polyamides. Determination of e-caprolactam and w-laurolactum by gas chromatography PRI/21 BS EN :2006 Bituminous mixtures. Material specifications. Asphalt concrete CORRIGENDUM 2 B/510/1 Also incorporates Corrigenda 1 BS EN :2006 Bituminous mixtures. Material specifications. Hot rolled asphalt CORRIGENDUM 2 B/510/1 Also incorporates Corrigenda 1 BS EN :2006 Bituminous mixtures. Material specifications. Porous asphalt CORRIGENDUM 2 B/510/1 Also incorporates Corrigenda 1 BS EN :2005 GRP tanks and vessels for use above ground. Delivery, installation and maintenance PRI/5 BS EN ISO 13485:2003 Medical devices. Quality management systems. Requirements for regulatory purposes CORRIGENDUM 3 CH/210/1 Also incorporates Corrigenda 1 & 2 BS EN 14382:2005+A1:2009 Safety devices for gas pressure regulating stations and installations. Gas safety shut-off devices for inlet pressures up to 100 bar GSE/32 Also incorporates Amendment 1 14 Prices may be subject to change. Update Standards Feb 2010

15 BS EN 14878:2007 Textiles. Burning behaviour of children s nightwear. Specification TCI/66/-/8 BS EN 15587:2008 Cereals and cereal products. Determination of Besatz in wheat (Triticum aestivum L.), durum wheat (Triticum durum Desf.), rye (Secale cereale L.) and feed barley (Hordeum vulgare L.) AW/4 BS EN 62138:2009 Nuclear power plants. Instrumentation and control important for safety. Software aspects for computer-based systems performing category B or C functions NCE/8 BS EN :2005 Polymeric thermistors. Directly heated positive step function temperature coefficient. Generic specification EPL/40X BS ISO 14594:2003 Microbeam analysis. Electron probe microanalysis. Guidelines for the determination of experimental parameters for wavelength dispersive spectroscopy CII/9 BS ISO :2001 Micrographics. Quality control of COM recorders that generate images using a single internal display system. Method of use IDT/1/1 BS EN ISO :2008 Leather. Chemical determination of formaldehyde content. Method using colorimetric analysis TCI/69 BS ISO 48:2007 Rubber, vulcanized or thermoplastic. Determination of hardness (hardness between 10 IRHD and 100 IRHD) PRI/22 BS ISO 15836:2009 Information and documentation. The Dublin Core metadata element set IDT/2/7 BS EN ISO 19141:2009 Geographic information. Schema for moving features IST/36 BS EN :1994+A2:2000 Safety of household and similar electrical appliances. General requirements CORRIGENDUM 4 CPL/61 Also incorporates Corrigenda 1, 2 & 3 and Amendments 2, 11, 12, 13, 14, 15 & 16 BS ISO 289-1:2005 Rubber, unvulcanized. Determinations using a shearing-disc viscometer. Determination of Mooney viscosity PRI/22 BS ISO 965-1:1998 ISO general purpose metric screw threads. Tolerances. Principles and basic data FME/9 UPDATED BRITISH STANDARDS The following standards have been amended and the amendments have been incorporated into an updated standard. NOTE: Updated British Standards must be reordered as the amendments are not available separately. BS EN :2002+A2:2006 Household and similar electrical appliances. Safety. General requirements CORRIGENDUM 4 CPL/61 Also incorporates Corrigenda 1, 2 & 3 and Amendments 2, 11, 12 & 13 BS EN :2003+A2:2007 Household and similar electrical appliances. Safety. Particular requirements for refrigerating appliances, ice-cream appliances and ice-makers CPL/61/3 Also incorporates Amendments 2 & 11 BS EN :2004 Switches for household and similar fixed electrical installations. Particular requirements. Electronic switches CORRIGENDUM 2 PEL/23 Also incorporates Corrigenda 1 BS EN :2004 Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs). General rules PEL/23/1 Also incorporates Amendment 11 BS ISO 965-3:1998 ISO general purpose metric screw threads. Tolerances. Deviations for constructional screw threads FME/9 PD ISO/TR :2008 Rolling bearings. Explanatory notes on ISO 281. Basic dynamic load rating and basic rating life MCE/7 BS ISO/IEC :2004 Information technology. Programming languages. Fortran. Base language CORRIGENDUM 3 IST/5 Also incorporates Corrigenda 1 & 2 BS ISO :2008 Rolling bearings. Balls. Steel balls MCE/7 BS ISO 3308:2000+A1:2009 Routine analytical cigarette-smoking machine. Definitions and standard conditions AW/40 BS 7972:2001+A1:2009 Safety requirements and test methods for children s bedguards for domestic use members, non-members CW/1/3 BS EN ISO 105-B08:1999+A1:2009 Textiles. Tests for colour fastness. Quality control of blue wool reference materials 1 to members, non-members TCI/81 BS EN 485-1:2008+A1:2009 Aluminium and aluminium alloys. Sheet, strip and plate. Technical conditions for inspection and delivery members, non-members NFE/35 BS EN 848-3:2007+A2:2009 Safety of woodworking machines. One side moulding machines with rotating tools. Numerically controlled (NC) boring and routing machines AMENDMENT members, non-members MTE/23 Also incorporates Amendment 1 Update Standards Feb 2010 Prices may be subject to change. 15

16 Updated British Standard continued... BS EN 930:1997+A2:2009 Footware, leather and imitation leather goods manufacturing machines. Roughing, scouring, polishing and trimming machines. Safety requirements AMENDMENT members, non-members MCE/3/12 Also incorporates Amendment 1 BS EN 931:1997+A2:2009 Footwear manufacturing machines. Lasting machines. Safety requirements AMENDMENT members, non-members MCE/3/12 Also incorporates Amendment 1 BS EN :1996+A1:2009 Compressors and vacuum pumps. Safety requirements. Vacuum pumps members, non-members MCE/8/-/4 BS EN 1782:1998+A1:2009 Tracheal tubes and connectors members, non-members CH/121/5 Also incorporates Corrigenda 1 BS EN 1853:1999+A1:2009 Agricultural machinery. Trailers with tipping body. Safety members, non-members AGE/32 BS EN :2003+A1:2009 Safety of woodworking machines. Circular sawing machines. Pendulum cross-cut sawing machines members, non-members MTE/23 BS EN :2007+A1:2009 Safety of woodworking machines. Circular sawing machines. Horizontal beam panel sawing machines members, non-members MTE/23 Also incorporates Corrigenda 1 BS EN :2007+A1:2009 Safety of woodworking machines. Circular sawing machines. Vertical panel sawing machines members, non-members MTE/23 To order visit BS EN :2004+A1:2009 Safety of woodworking machines. Circular sawing machines. Multiblade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading members, non-members MTE/23 BS EN 1953:1998+A1:2009 Atomizing and spraying equipment for coating materials. Safety requirements members, non-members MCE/3/8 BS EN ISO 4287:1998+A1:2009 Geometrical product specification (GPS). Surface texture: Profile method. Terms, definitions and surface texture parameters members, non-members TDW/4 Also incorporates Corrigenda 1 & 2 BS EN ISO 4651:1995+A1:2008 Cellular rubbers and plastics. Determination of dynamic cushioning performance members, non-members PRI/24 Also incorporates Corrigenda 1 BS EN :1998+A1:2009 Non active surgical implants. Particular requirements for cardiac and vascular implants. Vascular prostheses including cardiac valve conduits members, non-members CH/150/2 BS EN :1998+A1:2009 Non active surgical implants. Particular requirements for cardiac and vascular implants. Endovascular devices members, non-members CH/150/2 BS EN 12387:2005+A1:2009 Footwear, leather and imitation leather goods manufacturing machines. Modular shoe repair equipment. Safety requirements members, non-members MCE/3/12 BS EN 12545:2000+A1:2009 Footwear, leather and imitation leather goods manufacturing machines. Noise test code. Common requirements members, non-members MCE/3/12 BS EN 12653:1999+A2:2009 Footwear, leather and imitation leather manufacturing machines. Nailing machines. Safety requirements AMENDMENT members, non-members MCE/3/12 Also incorporates Amendment 1 BS EN 13448:2001+A1:2009 Agricultural and forestry machinery. Inter-row mowing units. Safety members, non-members AGE/32 BS EN 14018:2005+A1:2009 Agricultural and forestry machinery. Seed drills. Safety members, non-members AGE/32 BS EN 14070:2003+A1:2009 Safety of machine tools. Transfer and specialpurpose machines members, non-members MTE/1 BS EN :2005+A2:2008 Fire-fighting pumps. Fire-fighting centrifugal pumps without primer. Verification of general and safety requirements AMENDMENT members, non-members FSH/17/9 Also incorporates Amendment 1 BS EN 14930:2007+A1:2009 Agricultural and forestry machinery and gardening equipment. Pedestrian controlled and hand-held machines. Determination of accessibility of hot surfaces members, non-members AGE/6 BS EN ISO :2009 Cardiovascular implants. Endovascular devices. Endovascular prostheses members, non-members CH/150/2 Also incorporates Corrigenda 1 BS EN 55012:2007+A1:2009 Vehicles, boats and internal combustion engines. Radio disturbance characteristics. Limits and methods of measurement for the protection of off-board receivers members, non-members GEL/210/11 BS EN 60205:2006+A1:2009 Calculation of the effective parameters of magnetic piece parts members, non-members EPL/51 16 Prices may be subject to change. Update Standards Feb 2010

17 BS EN 60743:2001+A1:2008 Live working. Terminology for tools, equipment and devices members, non-members PEL/78 BS EN :2003+A1:2009 Hand-held motor-operated electric tools. Safety. Particular requirements for sanders and polishers other than disk type members, non-members CPL/116 Also incorporates Amendment 11 BS EN :2003+A2:2009 Hand-held motor-operated electric tools. Safety. Particular requirements for hammers AMENDMENT members, non-members CPL/116 Also incorporates Amendments 1 & 11 BS EN :2003+A1:2009 Hand-held motor-operated electric tools. Safety. Particular requirements for shears and nibblers members, non-members CPL/116 Also incorporates Amendment 11 BS EN :2003+A1:2009 Hand-held motor-operated electric tools. Safety. Particular requirements for reciprocating saws (jig and sabre saws) members, non-members CPL/116 Also incorporates Amendment 11 BS EN :2003+A1:2009 Hand-held motor-operated electric tools. Safety. Particular requirements for band saws members, non-members CPL/116 Also incorporates Amendment 11 BS EN :2006+A1:2009 Low-voltage switchgear and controlgear. Circuit-breakers members, non-members PEL/17/2 BS EN :2006 Information technology equipment. Safety. General requirements members, non-members EPL/108 Also incorporates Corrigenda 1 & 2 BS EN :2006 Information technology equipment. Safety. Equipment installed outdoors members, non-members EPL/108 Also incorporates Corrigenda 1 & 2 BS EN 62384:2006+A1:2009 DC or AC supplied electronic control gear for LED modules. Performance requirements members, non-members CPL/34/3 PAS 24:2007+A1:2009 Enhanced security performance requirements for door assemblies members, non-members B/538/2/P1 NA to BS EN :2004 UK National Annex to Eurocode 2. Design of concrete structures. General rules and rules for buildings members, non-members B/525/2 SPECIAL ANNOUNCEMENTS Comments can be sent by or by post to named contacts at: BSI Head Office 389 Chiswick High Road London W4 4AL Tel: BS EN Rotating electrical machines. AC generators for reciprocating internal combustion (RIC) engine driven generating sets This standard, which will be available shortly, supersedes BS EN :1998 and implements verbatim EN :2009 which is identical to IEC :2009. Contact: Keith Stiles keith.stiles@bsigroup.com PEL/2 ISO :2009 Plastic piping systems for renovation of underground non-pressure drainage and sewerage networks. General ISO :2009 Plastic piping systems for renovation of underground non-pressure drainage and sewerage networks. Lining with close-fit pipes ISO :2009 Plastic piping systems for renovation of underground non-pressure drainage and sewerage networks. Lining with cured-in-place pipes These ISO publications were announced in the December 2009 issue of Update Standards. Whilst they have been published as International Standards, there will be a delay in implementing them as British Standards as work needs to take place in CEN to accommodate the changes either by producing EN ISO standards or by updating EN , EN and EN The timescale for this is at present unknown. In the meantime the ISO Standards can still be purchased from BSI Customer Services. Contact: Committee Service Centre csc@bsigroup.com PRI/88/3 BRITISH STANDARDS PROPOSED FOR CONFIRMATION It is BSI policy for every standard to be reviewed by the technical committee responsible not more than five years after publication, to establish whether it is still current and, if it is not, to identify and set in hand appropriate action. Circumstances may lead to an earlier review. Confirmation indicates the continuing currency of a standard. A note of any objections to the proposals below should be sent to Debbie Stead, Head of Committee Service Centre Operations, BSI Head Office, 389 Chiswick High Road, London W4 4AL or via to BSUKoperations.review@bsigroup.com by 31 March, BS 376-2:1954 Railway signalling symbols. Wiring symbols and written circuits GEL/9 BS :1990 Methods for test for soils for civil engineering purposes. In-situ tests B/526/3 BRITISH STANDARDS REVIEWED AND CONFIRMED It is BSI policy for every standard to be reviewed by the technical committee responsible not more than five years after publication, to establish whether it is still current and, if it is not, to identify and set in hand appropriate action. Confirmation indicates the continuing currency of a standard. Where any standard in this list has been amended since publication, confirmation includes all amendments published to date. Reference to a particular amendment indicates that it is published concurrently with the confirmation. BS 1189:1986 Specification for baths made from porcelain enamelled cast iron B/503 BS 1390:1990 Specification for baths made from vitreous enamelled sheet steel B/503 BS 3402:1969 Specification for quality of vitreous china sanitary appliances B/503 Update Standards Feb 2010 Prices may be subject to change. 17

18 British Standards Reviewed and Confirmed continued... BS :1988 Automatic gas burners. Specification for burners with input rating 60 kw and above GSE/27 BS :1987 Automatic gas burners. Specification for packaged burners with input rating 7.5 kw up to but excluding 60 kw GSE/27 BS 8766:2004 Names and identifiers of individuals and groups. Data structure for interoperability. Specification IST/36 BS EN 14907:2005 Ambient air quality. Standard gravimetric measurement method for the determination of the PM 2,5 mass fraction of suspended particulate matter EH/2/3 BRITISH STANDARDS PROPOSED FOR DECLARATION OF OBSOLESCENCE Declaration of obsolescence indicates that the standard is not recommended for use in new equipment, but needs to be retained for the servicing of existing equipment that is expected to have a long working life. A note of any objections to the proposals below should be sent to Debbie Stead, Head of Committee Service Centre Operations, BSI Head Office, 389 Chiswick High Road, London W4 4AL or via to BSUKoperations.review@bsigroup.com by 31 March, BS 456:1961 Specification for dimensions of track circuit insulation GEL/9 This standard has been re-proposed for obsolescence for a further period Help Us to Help You! Always quote your Customer Number Don t know your number? Contact Customer Services who will be happy to check it for you BRITISH STANDARDS DECLARED OBSOLESCENT Declaration of obsolescence indicates that the standard is not recommended for use in new equipment but needs to be retained for the servicing of existing equipment that is expected to have a long working life. BS 1428-D1:1965 Microchemical apparatus. Volumetric analysis. Specification for burettes with pressure-filling device and automatic zero LBI/36 This standard has been re-declared obsolescent as the family of microchemical apparatus has largely been superseded by instrumental techniques and whether this item is retained depends on whether it is still manufactured and purchased BS 2058:1961 Specification for Lunge-Rey weighing pipette LBI/36 This standard has been re-declared obsolescent as the technique is old but at the last review there was still a small but active level of use. Whether this item is retained depends on whether it is still manufactured and purchased BRITISH STANDARDS WITHDRAWN If any standard in this list has been amended since publication, all amendments published to date are also withdrawn BS 903-A60.2:1992 Physical testing of rubber. Curemetering. Method for the determination of vulcanization characteristics using an oscillating disc curemeter PRI/22 Superseded by BS ISO 3417:2009 BS 903-A64:1995 Physical testing of rubber. Method for the preparation, mixing and vulcanization of rubber test mixes PRI/22 Superseded by BS ISO 2393:2008 BS 1329:1974 Specification for metal hand rinse basins B/503 This standard was partially superseded by BS 6731:1988. The clauses which remained current are no longer considered relevant and are now withdrawn BS :1998 Spectacle lenses. Specification for tolerances on optical properties of mounted spectacle lenses CH/172/3 Superseded by BS EN ISO 21987:2009 BS :Method 323A:1996 Methods of testing plastics. Mechanical properties. Tensile vibration. Non-resonance method PRI/21 Superseded by BS ISO :2008 BS 4293:1983 Specification for residual current-operated circuit-breakers PEL/23/1 Superseded by BS EN :2004, BS EN :1995 and BS IEC :1990 BS :1999 Methods of test for cereals and pulses. Determination of moisture content of cereals and cereal products (routine reference method) AW/4 Superseded by BS EN ISO 712:2009 BS 5209:1975 Code of practice for the testing of sulphur hexafluoride taken from electrical equipment GEL/10 This standard was partially superseded by BS EN 60480:2004. The clauses which remained current are no longer considered relevant and are now withdrawn BS 5518:1977 Specification for electronic variable control switches (dimmer switches) for tungsten filament lighting PEL/23 Superseded by BS EN :2004 BS 5776:1996 Specification for powered stairlifts MHE/4 Superseded by BS EN 81-40:2008 BS :1983 Shower units. Specification for prefabricated shower trays made from acrylic material B/503 This standard was partially superseded by BS EN 251:2003. The clauses which remained current are no longer considered relevant and are now withdrawn BS :1983 Shower units. Specification for prefabricated shower trays made from porcelain enamelled cast iron B/503 This standard was partially superseded by BS EN 251:2003. The clauses which remained current are no longer considered relevant and are now withdrawn BS :1983 Shower units. Specification for prefabricated shower trays made from vitreous enamelled sheet steel B/503 This standard was partially superseded by BS EN 251:2003. The clauses which remained current are no longer considered relevant and are now withdrawn 18 Prices may be subject to change. Update Standards Feb 2010

19 BS :1985 Shower units. Specification for prefabricated shower trays made from glazed ceramic B/503 This standard was partially superseded by BS EN 251:2003. The clauses which remained current are no longer considered relevant and are now withdrawn BS :1983 Electric surface heating. Specification for electric surface heating devices PEL/27 This standard has been withdrawn as it conflicts with recently adopted standards BS EN , DD IEC/TS , BS EN and BS EN BS :1983 Electric surface heating. Guide to the design of electric surface heating systems PEL/27 This standard has been withdrawn as it conflicts with recently adopted standards BS EN , DD IEC/TS , BS EN and BS EN BS :1983 Electric surface heating. Code of practice for the installation, testing and maintenance of electric surface heating systems PEL/27 This standard has been withdrawn as it conflicts with recently adopted standards BS EN , DD IEC/TS , BS EN and BS EN BS :1996 Methods for microbiological examination of meat and meat products. Enumeration of lactic acid bacteria. Colony-count technique at 30ºC AW/9 This standard has been withdrawn as it is dual numbered with ISO 13721:1995 which was withdrawn by ISO as a result of the publication of ISO 15214:1998 BS EN 1289:1998 Non-destructive examination of welds. Penetrant testing of welds. Acceptance levels WEE/46 Superseded by BS EN ISO 23277:2009 BS EN 1290:1998 Non-destructive examination of welds. Magnetic particle examination of welds WEE/46 Superseded by BS EN ISO 17638:2009 BS EN 1291:1998 Non-destructive testing of welds. Magnetic particle testing of welds. Acceptance levels WEE/46 Superseded by BS EN ISO 23278:2009 BS EN 14299:2004 Non-active surgical implants. Particular requirements for cardiac and vascular implants. Specific requirements for arterial stents CH/150/2 Superseded by BS EN ISO :2009 and BS EN ISO :2008 BS EN 14684:2004 Polyester fibre ropes. Double braid construction TCI/77 Superseded by BS EN ISO 10547:2009 BS EN 14686:2004 Fibre ropes of polyester/polyolefin dual fibres TCI/77 Superseded by BS EN ISO 10556:2009 BS EN 14687:2004 Mixed polyolefin fibre ropes TCI/77 Superseded by BS EN ISO 10572:2009 BS EN :2001 Primary batteries. General CPL/35 Superseded by BS EN :2007 BS EN :2001 Primary batteries. Physical and electrical specifications CPL/35 Superseded by BS EN :2007 BS EN 60445:2000 Basic and safety principles for man-machine interface, marking and identification. Identification of equipment terminals and of terminations of certain designated conductors, including general rules for an alphanumeric system GEL/16 Superseded by BS EN 60445:2007 BS EN :1994 Luminaires. Particular requirements. Luminaires for road and street lighting CPL/34/4 Superseded by BS EN :2003 BS EN :2001 Electromagnetic compatibility (EMC). Testing and measurement techniques. Overview of IEC series GEL/210/12 Superseded by BS EN :2007 BS EN :2004 Electrical apparatus for use in the presence of combustible dust. Classification of areas where combustible dusts are or may be present GEL/31/20 Superseded by BS EN :2009 BS EN :2003 Digital audio. Interface for non-linear PCM encoded audio bitstreams applying IEC General EPL/100 Superseded by BS EN :2007 BS EN :2002 Electricity metering. Data exchange for meter reading, tariff and load control. COSEM application layer PEL/13 Superseded by BS EN :2007 BS ISO 21307:2009 Plastics pipes and fittings. Butt fusion jointing procedures for polyethylene (PE) pipes and fittings used in the construction of gas and water distribution systems PRI/88/2 This standard has been withdrawn because of concerns regarding the butt fusion welding procedure. The UK has proposed an amendment be developed for the ISO to rectify this PAS 60-1:2004 Equipment used in the controlled removal of asbestos-containing materials. Controlled wetting of asbestos-containing materials. Specification Withdrawn as BS :2009 is based on PAS 60-1:2004 PAS 60-2:2004 Equipment used in the controlled removal of asbestos-containing materials. Negative pressure units. Specification Withdrawn as BS :2009 is based on PAS 60-2:2004 PAS 60-3:2004 Equipment used in the controlled removal of asbestos-containing materials. Operation, cleaning and maintenance of class H vacuum cleaners. Code of practice Withdrawn as BS :2009 is based on PAS 60-3:2004 PAS 75:2005 Specification for the service and provision of printing services This product has now been withdrawn BRITISH STANDARDS UNDER REVIEW The following British Standards implement International and/or European Standards which are currently under review to see if they should be confirmed, revised or withdrawn. Comments are welcome and should be sent to Debbie Stead, Head of Committee Service Centre Operations, BSI Head Office, 389 Chiswick High Road, London W4 4AL or via to BSUKoperations.review@bsigroup.com by 31 March, 2010, in order to be considered by the relevant UK Committee. BS EN 12797:2000 Brazing. Destructive tests of brazed joints WEE/19 BS EN 12799:2000 Brazing. Non-destructive examination of brazed joints WEE/19 Update Standards Feb 2010 Prices may be subject to change. 19

20 New Work Started NEW WORK STARTED The reference number of the committee responsible for each item of new work started is given after each entry. Where a work item has the temporary designation BS EN XXXX, it has not yet been allocated a standard number by the European standards body. BS XXXX Inclusive service provision requirements for identifying and responding to consumer vulnerability. Revolving doors SVS/0/1 BS XXXX Specification for installation and maintenance of gas-fired micro-cogeneration packages of rated heat input not exceeding 70 kw net GSE/30 BS (Revision) Code of practice for safety at powered doors for pedestrian use. General will supersede BS :1996 MHE/31 BS (Revision) Code of practice for safety at powered doors for pedestrian use. Straight and curved sliding doors and prismatic and folding doors will supersede BS :1996 MHE/31 BS (Revision) Code of practice for safety at powered doors for pedestrian use. Swing doors and balanced doors will supersede BS :1996 MHE/31 BS (Revision) LV and MV polymeric insulated cables for use by distribution and generation utilities. Methods of test will supersede BS :1999 GEL/20/16 BS (Revision) LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables of rated voltage 0.6/1 kv. XLPE insulated combined neutral and earth copper wire concentric cables with copper or aluminium conductors will supersede BS :2001 GEL/20/16 BS (Revision) LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables of rated voltage 0.6/1 kv. XLPE insulated combined neutral and earth copper wire concentric cables with copper or aluminium conductors, having low emission of smoke and corrosive gases when affected by fire will supersede BS :2001 GEL/20/16 BS LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables of rated voltage 0.6/1 kv. XLPE insulated split concentric cables with copper or aluminium conductors, having low emission of smoke and corrosive gases when affected by fire GEL/20/16 BS (Revision) LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables of rated voltage 0.6/1 kv. XLPE insulated, copper wire waveform concentric cables with solid aluminium conductors will supersede BS :2001 GEL/20/16 BS (Revision) LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables with extruded insulation for rated voltages of 11 kv and 33 kv. Single-core 33 kv lead sheathed cables will supersede BS :1999 GEL/20/16 BS (Revision) LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables with extruded insulation for rated voltages of 11 kv and 33 kv. Three-core 11 kv cables will supersede BS :1999 GEL/20/16 BS (Revision) Structural design of low-rise buildings. Code of practice for stability, site investigation, foundations and ground floor slabs for housing will supersede BS :1995 B/204 BS 8538 Process for the evaluation, securement of intellectual property rights and the commercial advancement of inventions IMS/1 BS (Revision) Asphalt for roads and other paved areas. Specification for transport, laying and compaction and type testing protocols will supersede BS :2007 B/510 BS EN WI Tanks for the transport of dangerous goods. Service equipment. Footvalve sizes other than 100mm dia. (nom) AUE/18 BS (Revision) Code of practice for safety at powered doors for pedestrian use. Low energy swing doors will supersede BS :1996 MHE/31 BS (Revision) Code of practice for safety at powered doors for pedestrian use. Revolving doors will supersede BS :1996 MHE/31 BS (Revision) LV and MV polymeric insulated cables for use by distribution and generation utilities. General will supersede BS :1996 GEL/20/16 BS (Revision) LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables of rated voltage 0.6/1 kv. XLPE insulated, copper wire waveform or helical concentric cables with solid aluminium conductors, having low emission of smoke and corrosive gases when affected by fire will supersede BS :2005 GEL/20/16 BS (Revision) LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables with extruded insulation for rated voltages of 11 kv and 33 kv. Single-core 11 kv and 33 kv cables will supersede BS :1999 GEL/20/16 BS EN WI Tanks for the transport of dangerous goods. Service equipment for tanks. Protective cap for adaptor for bottom loading and unloading AUE/18 BS EN 590:2009/Amendment 1 Automotive fuels. Diesel. Requirements and test methods PTI/2 BS EN 618:2002/Amendment 1 Continuous handling equipment and systems. Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors MHE/9 20 Prices may be subject to change. Update Standards Feb 2010

21 BS EN 619:2002/Amendment 1 Continuous handling equipment and systems. Safety and EMC requirements for equipment for mechanical handling of unit loads MHE/9 BS EN (Revision) Aircraft ground support equipment. General requirements. Basic safety requirements will supersede BS EN :2001+A1:2009 ACE/57 BS EN Bituminous mixtures. Material specifications. Bituminous mixture for ultra-thin layer asphalt concrete (UTLAC) B/510/1 BS EN 690 (Revision) Agricultural machinery. Manure spreaders. Safety will supersede BS EN 690:1995 AGE/32 BS EN 997 (Revision) WC pans and WC suites with integral trap will supersede BS EN 997:2003 B/503 BS EN Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines. Roll packaging machines MCE/3/9 BS EN 1534 (Revision) Wood and parquet flooring. Determination of resistance to indentation (Brinell). Test method will supersede BS EN 1534:2000 B/543 BS EN (Revision) Founding. Technical conditions of delivery. Additional requirements for iron castings will supersede BS EN :1997 ISE/35 BS EN 1957 (Revision) Domestic furniture. Beds and mattresses. Test methods for the determination of functional characteristics will supersede BS EN 1957:2000 FW/0/2 BS EN ISO 3095 (Revision) Railway applications. Acoustics. Measurement of noise emitted by railbound vehicles will supersede BS EN ISO 3095:2005 EH/1 BS EN ISO Optics and optical instruments. Focimeters. Test lenses and methods for calibration and verification of focimeters CH/172/6 BS EN ISO (Revision) Ophthalmic instruments. Chart projectors will supersede BS EN ISO 10938:1998 CH/172/6 BS EN (Revision) Builders hoists for persons and materials with vertically guided cages will supersede BS EN 12159:2000+A1:2009 MHE/6 BS EN (Revision) Thermal insulation products for buildings. Factory made mineral wool (MW) products. Specification will supersede BS EN 13162:2008 B/540/6 BS EN (Revision) Thermal insulation products for buildings. Factory made products of expanded polystyrene (EPS). Specification will supersede BS EN 13163:2008 PRI/72/2 BS EN (Revision) Thermal insulation products for buildings. Factory made products of extruded polystyrene foam (XPS). Specification will supersede BS EN 13164:2008 PRI/72/2 BS EN (Revision) Thermal insulation products for buildings. Factory made rigid polyurethane foam (PUR) products. Specification will supersede BS EN 13165:2008 PRI/72/4 BS EN 1561 (Revision) Founding. Grey cast irons will supersede BS EN 1561:1997 ISE/35 BS EN 1563 (Revision) Founding. Spheroidal graphite cast iron will supersede BS EN 1563:1997 ISE/35 BS EN (Revision) Patient handling equipment used in road ambulances. Heavy duty stretcher will partially supersede BS EN 1865:2000 CH/239 BS EN (Revision) Patient handling equipment used in road ambulances. Mechanical assisted transfer chair will partially supersede BS EN 1865:2000 CH/239 BS EN (Revision) Patient handling equipment used in road ambulances. Stretcher support will partially supersede BS EN 1865:2000 CH/239 BS EN (Revision) Aircraft ground support equipment. Specific requirements. Passenger stairs will supersede BS EN :2001+A1:2009 ACE/57 BS EN (Revision) Aircraft ground support equipment. Specific requirements. Container/Pallet loaders will supersede BS EN :2005+A1:2009 ACE/57 BS EN 13081:2008/Amendment 1 Tanks for transport of dangerous goods. Service equipment for tanks. Vapour collection adaptor and coupler AUE/18 BS EN 13082:2008/Amendment 1 Tanks for transport of dangerous goods. Service equipment for tanks. Vapour transfer valve AUE/18 BS EN 13083:2008/Amendment 1 Tanks for transport of dangerous goods. Service equipment for tanks. Adaptor for bottom loading and unloading AUE/18 BS EN (Revision) Thermal insulation products for buildings. Factory made products of phenolic foam (PF). Specification will supersede BS EN 13166:2008 PRI/72 BS EN (Revision) Thermal insulation products for buildings. Factory made cellular glass (CG) products. Specification will supersede BS EN 13167:2008 B/540/6 BS EN (Revision) Thermal insulation products for buildings. Factory made wood wool (WW) products. Specification will supersede BS EN 13168:2008 B/540/6 BS EN (Revision) Thermal insulation products for buildings. Factory made products of expanded perlite (EPB). Specification will supersede BS EN 13169:2008 B/540/6 Update Standards Feb 2010 Prices may be subject to change. 21

22 New Work Started continued... BS EN (Revision) Thermal insulation products for buildings. Factory made products of expanded cork (ICB). Specification will supersede BS EN 13170:2008 B/540/6 BS EN (Revision) Thermal insulating products for buildings. Factory made wood fibre (WF) products. Specification will supersede BS EN 13171:2008 B/540/6 BS EN :2005/Amendment 1 Railway applications. Track. Switches and crossings. Actuation, locking and detection RAE/2 BS EN :2005/Amendment 1 Railway applications. Track. Switches and crossings. Switches RAE/2 BS EN :2005/Amendment 1 Railway applications. Track. Switches and crossings. Fixed common and obtuse crossings RAE/2 BS EN :2006/Amendment 1 Railway applications. Track. Switches and crossings. Crossings with moveable parts RAE/2 BS EN :2007/Amendment 1 Railway applications. Track. Switches and crossings. Expansion devices RAE/2 BS EN :2006/Amendment 1 Railway applications. Track. Switches and crossings. Layouts RAE/2 BS EN (Revision) Unbound mixtures. Specifications will supersede BS EN 13285:2003 B/510/4 BS EN :2009/Amendment 3 Unfired pressure vessels. Inspection and testing PVE/1 BS EN (Revision) Condition of drain and sewer systems outside buildings. General requirements will supersede BS EN :2003 B/505 BS EN (Revision) Coil coated metals. Test methods. Resistance to solvents (rubbing test) will supersede BS EN :2004 STI/27 BS EN (Revision) Coil coated metals. Test methods. Adhesion of strippable films will supersede BS EN :2004 STI/27 BS EN (Revision) Coil coated metals. Test methods. Panel design and method of atmospheric exposure testing will supersede BS EN :2004 STI/27 BS EN (Revision) Overfill prevention devices for static tanks for liquid petroleum fuels will supersede BS EN 13616:2004 PVE/21/2 BS EN Protection profile for secure signature creation device. Device with key generation IST/17 BS EN 14359:2006/Amendment 1 Gas-loaded accumulators for fluid power applications MCE/18/-/1 BS EN (Revision) Solid biofuels. Terminology, definitions and descriptions will supersede DD CEN/TS 14588:2004 PTI/17 BS EN 14601:2005/Amendment 1 Railway applications. Straight and angled end cocks for brake pipe and main reservoir pipe RAE/4 BS EN ISO Petroleum and natural gas industries. Downhole equipment. Progressing cavity pump systems for artificial lift. Drive strings PSE/17/-/4 BS EN (Revision) Solid biofuels. Methods for the determination of particle size distribution. Oscillating screen method using sieve apertures of 3,15 mm and above will supersede DD CEN/TS :2006 PTI/17 BS EN (Revision) Solid biofuels. Methods for the determination of particle size distribution. Vibrating screen method using sieve apertures of 3,15 mm and below will supersede DD CEN/TS :2006 PTI/17 BS EN 15194:2009/Amendment 1 Cycles. Electrically power assisted cycles. EPAC bicycles GME/25 BS EN (Revision) Railway applications. Brake indicators. Pneumatically operated brake indicators will supersede BS EN :2008 RAE/4 BS EN :2007/Amendment 1 Chimneys. Design, installation and commissioning of chimneys. Chimneys for nonroomsealed heating appliances B/506/1 BS EN 15355:2008/Amendment 1 Railway applications. Braking. Distributor valves and distributor-isolating devices RAE/4 BS EN :2007/Amendment 1 Adhesives for load bearing timber structures. Test methods. Creep deformation test at cyclic climate conditions with specimens loaded in bending shear PRI/52 BS EN 15611:2008/Amendment 1 Railway applications. Braking. Relay valves RAE/4 BS EN 15612:2008/Amendment 1 Railway applications. Braking. Brake pipe accelerator valve RAE/4 BS EN 15624:2008/Amendment 1 Railway applications. Braking. Empty-loaded changeover devices RAE/4 BS EN 15625:2008/Amendment 1 Railway applications. Braking. Automatic variable load sensing devices RAE/4 BS EN (Revision) Road transport and traffic telematics. ESafety. ECall minimum set of data (MSD) will supersede DD CEN/TS 15722:2009 EPL/278 PD CEN/TR Gas meters. Smart gas meters GSE/25 BS EN Intelligent transport systems. ESafety. ECall high level application requirements (HLAP) EPL/278 BS EN Packaging. Rigid plastic containers. Nomenclature of plastic finishes PKW/0/-/10 BS EN Packaging. Rigid plastic containers. PET finish 30/25 H (18, 5) PKW/0/-/10 BS EN Packaging. Rigid plastic containers. PET finish 30/25 L (16, 8) PKW/0/-/10 BS EN Packaging. Rigid plastic containers. PET finish 26, 7 (lead 6, 35) PKW/0/-/10 BS EN Packaging. Rigid plastic containers. PET finish 26, 7 (lead 9, 00) PKW/0/-/10 22 Prices may be subject to change. Update Standards Feb 2010

23 BS EN Packaging. Rigid plastic containers. PET finish 38 PKW/0/-/10 BS EN Thermal insulation products for buildings. Factory made products of polyethylene foam (PEF). Specification PRI/72 BS EN Products used for treatment of water intended for human consumption. natural zeolite CII/59 DD CEN/TS Interoperability specification for flight data processing (air traffic control) ACE/58 BS EN Intelligent transport systems. ESafety. Pan European ecall-operating requirements EPL/278 BS EN Paints and varnishes. Determination of dry solid content and spreading rate of coil coatings STI/27 BS EN Fertilizers. Determination of N-(2- nitrophenyl)phosphoric acid triamide (2-NPT) in urea and fertilizers containing urea. Method using high-performance liquid chromatographie (HPLC) CII/37 BS EN Founding. Compacted (vermicular) graphite cast irons ISE/35 DD CEN/TS Internet content and communications filtering software and services. Main element ICT/-/7 BS EN ISO (Revision) Dentistry. Manual toothbrushes. General requirements and test methods will supersede BS EN ISO 20126:2005 CH/106/7 BS EN ISO (Revision) Pumps. Shaft sealing systems for centrifugal and rotary pumps will supersede BS EN ISO 21049:2004 MCE/6 BS EN (Revision) Bushings above 1 kv up to 36 kv and from 250 A to 3,15 ka for liquid filled transformers will supersede BS EN 50180:1999 PEL/36 BS EN (Revision) Railway applications. Energy measurement on board trains. General will partially supersede BS EN 50463:2007 GEL/9 BS EN (Revision) Railway applications. Energy measurement on board trains. Energy meter will partially supersede BS EN 50463:2007 GEL/9 BS EN (Revision) Railway applications. Energy measurement on board trains. Input/output interfaces will partially supersede BS EN 50463:2007 GEL/9 BS EN (Revision) Railway applications. Energy measurement on board trains. Communication onboard/ground will partially supersede BS EN 50463:2007 GEL/9 BS EN (Revision) Railway applications. Energy measurement on board trains. Conformance testing procedure will partially supersede BS EN 50463:2007 GEL/9 BS EN (Revision) Optical fibre cables. Indoor cables. Family specification for simplex and duplex cables will supersede BS EN :2003 GEL/86/1 BS EN :1994/Amendment 1 Luminaires. Particular requirements. Luminaires for swimming pools and similar applications CPL/34/4 BS EN (Revision) Industrial microwave heating installations. Test methods for the determination of power output will supersede BS EN 61307:2006 PEL/27 BS EN Fibre optic interconnecting devices and passive components performance standard. Single mode fibre pigtailed style optical fuse for category C. Controlled environment GEL/86/2 BS EN Fibre optic interconnecting devices and passive components performance standard. Single mode fibre plug style optical fuse for category C. Controlled environment GEL/86/2 BS EN Fibre optic interconnecting devices and passive components performance standard. Single mode fibre pigtailed style optical power limiter for category C. Controlled environment GEL/86/2 BS EN Fibre optic active components and devices. Basic test and measurement procedures. Optical power variation induced by mechanical disturbance in optical connectors and transceiver interfaces GEL/86/3 BS EN (Revision) High-voltage switchgear and controlgear. Alternating current fused circuit-switchers for rated voltages above 1 kv up to and including 52 kv will supersede BS EN :2005 PEL/17/1 BS EN LCD backlight unit. Terminology and letter symbols EPL/47 BS EN Alarm systems. Intrusion and hold-up systems. Intrusion detectors. Requirements for microwave detectors GW/1 BS EN Alarm systems. Intrusion and hold-up systems. Intrusion detectors. Requirements for combined passive infrared and microwave detectors GW/1 BS EN Alarm systems. Intrusion and hold-up systems. Intrusion detectors. Requirements for combined passive infrared and ultrasonic detectors GW/1 BS EN Alarm systems. Intrusion and hold-up systems. Intrusion detectors. Requirements for opening contacts (magnetic) GW/1 BS EN Secondary batteries for the propulsion of electric road vehicles. Performance testing for lithium-ion cells PEL/21 BS EN Secondary batteries for the propulsion of electric road vehicles. Reliability and abuse testing for lithium-ion cells PEL/21 BS EN Non-ballasted single capped LED lamps for general lighting. Safety requirements CPL/34/1 BS EN Non-ballasted single capped LED lamps for general lighting. Performance requirements CPL/34/1 Update Standards Feb 2010 Prices may be subject to change. 23

24 New Work Started continued... BS ISO 3560 Road vehicles. Frontal fixed barrier or pole impact test procedure AUE/15 BS ISO Graphical symbols. Safety colours and safety signs. Design principles for graphical symbols for use in safety signs PH/8/1 BS ISO 3898 Bases for design of structures. Notations. General symbols B/525/1 BS ISO Methods of test for full-flow lubricating oil filters for internal combustion engines. Cold start simulation and hydraulic pulse durability test will supersede BS :1991 MCE/21/5 BS ISO 5526 Cereals, pulses and other food grains. Nomenclature will supersede BS 6860:1987 AW/4 BS ISO (Revision) Implants for surgery. Ultra-high-molecularweight polyethylene. Moulded forms will supersede BS ISO :2006 CH/150/1 BS ISO (Revision) Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Volumetric pumps will supersede BS ISO :2001 PTI/15 BS ISO Fire protection. Automatic sprinkler systems. Requirements and test methods for wet alarm valves, retard chambers and water motor alarms FSH/18/2 BS ISO Fire protection. Automatic sprinkler systems. Requirements and test methods for dry pipe valves FSH/18/2 BS ISO 6529 (Revision) Protective clothing. Protection against chemicals. Determination of resistance of protective clothing materials to permeation by liquids and gases will supersede BS EN ISO 6529:2001 PH/3/3 BS ISO (Revision) Road vehicles. 60 V and 600 V single-core cables. Dimensions test methods and requirements for aluminium conductor cables will supersede BS ISO 6722:2006 AUE/16 BS ISO (Revision) Natural gas. Determination of composition with defined uncertainty by gas chromatography. Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line process application using three columns will supersede BS EN ISO :2001 PTI/15 BS ISO (Revision) Acoustics. Audiometric test methods. Speech audiometry will supersede BS EN ISO :1998 EH/1 PD ISO/TR 8713 Electrically propelled road vehicles. Vocabulary. Terms and definitions for ISO TC22/SC21 PEL/69 BS ISO 8896 Oil of caraway (Carum carvi Linnaeus) AW/54 BS ISO (Revision) Optics and optical instruments. Environmental test methods. Definitions, extent of testing will supersede BS ISO :1994 CPW/172/1 BS ISO 9462:2006/Amendment 1 Alpine ski bindings. Requirements and test methods SW/136 BS ISO (Revision) Natural gas. Performance evaluation for on-line analytical systems will supersede BS EN ISO 10723:2002 PTI/15 BS ISO (Revision) Hydraulic fluid power. Filter elements. Sequence of tests for verifying performance characteristics will supersede BS ISO 11170:2003 MCE/18/-/6 BS ISO Soil quality. Effects of pollutants on earthworms (Eisenia fetida). Determination of acute toxicity using artificial soil substrate will supersede BS :1994 EH/4 BS ISO Soil quality. Effects of pollutants on earthworms (Eisenia fetida). Determination of effects on reproduction will supersede BS :1998 EH/4 BS ISO Auto-injectors for medical use. Requirements and test methods CH/84 BS ISO Metallic materials. Fatigue testing. Variable amplitude fatigue testing ISE/101 BS ISO Metallic materials. Fatigue testing. Variable amplitude fatigue testing ISE/101 BS ISO Test procedures for positioning and guidance systems in agriculture. Satellite-based autoguidance systems tested during straight and level travel AGE/6 DD ISO/TS Cardiovascular implants. Vascular device-drug combination products CH/150/2 BS ISO (Revision) Graphic technology. Process control for the production of half-tone colour separations, proofs and production prints. Flexographic printing will supersede BS ISO :2006 PAI/43 BS ISO Petroleum and natural gas industries. Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures PSE/17/2 BS ISO Gas analysis. Measurement protocols and data evaluation techniques for general analytical applications PTI/15 DD ISO/TS Electronic fee collection. Conformity evaluation of on-board and roadside equipment to CEN ISO/TS Abstract test suite EPL/278 BS ISO Framework of the design process for energysaving single-family residential and small commercial buildings with the energy consumption ratio as a criterion RHE/2 BS ISO (Revision) Petroleum and natural gas industries. Completion fluids and materials. Measurement of viscous properties of completion fluids will supersede BS EN ISO :2005 PSE/17 BS ISO Escalators and moving walks. Design and development of programmable electronic systems in safety related application (PESSRAE) MHE/4 BS ISO (Revision) Determination of flash point. Abel closed-cup method will supersede BS EN ISO 13736:2008 PTI/13 24 Prices may be subject to change. Update Standards Feb 2010

25 BS ISO Stationary source emissions. Green house gases. Calibration of automated measuring systems EH/2/1 BS ISO Space systems. End of life passivation of unmanned spacecraft ACE/68 BS ISO Measurement of lift ride quality. Lifts (elevators) MHE/4 BS ISO Stationary source emissions. Green house gases. Ongoing quality control of automated measuring systems EH/2/1 BS ISO Ships and marine technology. Air bag for ship up to or down to launching way SME/32/-/8 BS ISO/IEC :2008/Amendment 1 Identification cards. Contactless integrated circuit cards. Proximity. Transmission protocol IST/17 BS ISO Guidelines for design of concrete structures using fibre-reinforced polymer materials B/517 BS ISO Laminate floor coverings. Laminate floor covering. Specification PRI/3/60 BS ISO Requirements for colour proofing systems using electronic displays PAI/43 BS ISO Optics and photonics. Interferometric measurement of optical elements and optical systems. Test methods for the determination of surface form or wavefront of optical elements and optical systems by interferometry CPW/172/1 BS ISO Non-destructive testing of welds. Time-of-flight diffraction technique (TOFD) for testing of welded joints. Acceptance levels WEE/46 PD ISO/TR Fire resistance tests. Guidelines for computational structural fire design FSH/22/2 BS ISO Soil quality. Determination of potential nitrification and inhibition of nitrification. Rapid test by ammonium oxidation EH/4 BS ISO Data exchange involving roadside modules communication. Application profile. SNMP EPL/278 BS ISO Space systems. Survivability of unmanned spacecraft against space debris and meteoroid impacts. Assessment procedure ACE/68 BS ISO Aerospace series. Dynamic testing of the locking behaviour of bolted connections under transverse loading conditions (vibration test) ACE/12 BS ISO Microbiology of food and animal feeding stuffs. Method validation. Terminology of method validation AW/9 BS ISO Microbiology of food and animal feeding stuffs. Method validation. Protocol for the validation of proprietary methods against a reference method AW/9 BS ISO Space system. Man-system integration standards. Techno-medical requirements for space vehicle crew habitation ACE/68 BS ISO Space systems. Avoiding collisions with orbiting objects ACE/68 BS ISO Space systems. Launch pad and integration site. Analysis of failures ACE/68 BS ISO Space systems. Disposal of satellites operating in or crossing low earth orbit ACE/68 BS ISO Liquid pumps and installation. General terms. Definitions, quantities, letter symbols and units. Liquid pumps MCE/6 BS ISO Liquid pumps. General terms and installation. Definitions, quantities, letter symbols and units. Pumping system MCE/6 BS ISO/IEC (Revision) Information technology. Radio frequency identification device conformance test methods. Test methods for air interface communications at 860 MHz to 960 MHz will supersede PD ISO/IEC TR :2006 IST/34 BS ISO (Revision) Geographic information. Portrayal will supersede BS EN ISO 19117:2006 IST/36 BS ISO Geographic information. Place Identifier (PI) architecture IST/36 BS ISO Sustainability in event management SDS/1 BS ISO/IEC Information technology. IEEE Standard for a smart transducer interface for sensors and actuators. Transducers to Radio Frequency Identification (RFID) systems communication protocols and transducer electronic data sheet formats IST/34 BS ISO Fire tests. Method of measurement of gases using Fourier transform infrared spectroscopy (FTIR) in cumulative smoke test FSH/21/5 BS ISO Metallic materials. Axial alignment of fatigue testing machines ISE/101 BS ISO/IEC 24744:2007/Amendment 1 Software engineering. Metamodel for development methodologies IST/15 BS ISO (Revision) Road vehicles. Implementation of WWH-OBD communication requirements. Connection between vehicle and test equipment will supersede DD ISO/PAS :2006 AUE/16 BS ISO Statistical distribution of normal hearing thresholds under free-field listening conditions EH/1 PD ISO/IEC TR Information technology. JPEG XR image coding system. System architecture IST/37 Update Standards Feb 2010 Prices may be subject to change. 25

26 New Work Started continued... DD IEC/PAS Connectors for electronic equipment. Product requirements. Circular connectors. Detail specification for M12 x M12 x1 circular connectors with screw-locking, for high speed ethernet and high speed data communication with frequencies up to 500 MHz and 10 gigabits/sec EPL/48 DD IEC/PAS Radio-frequency connectors. Sectional specification for RBMA series. Blind mating RF coaxial connectors EPL/46/2 DD IEC/PAS Radio-frequency connectors. Sectional specification for SMP series. RF coaxial connectors EPL/46/2 DD IEC/PAS Radio-frequency connectors. Sectional specification for SQMA series quick lock. RF connectors EPL/46/2 DD IEC/PAS Fibre optic interconnecting devices and passive components performance. Non-connectorised single-mode fibre optic LAN WDM devices with channel spacing of 800 GHz for category C. Controlled environments GEL/86/2 BS IEC :2009/Amendment 1 Organic light emitting diode (OLED) displays. Generic specifications EPL/47 BS ISO Preparation of instructions for use. General principles and detailed requirements TDW/4 PD 6691 (Revision) Guidance on the use of BS EN Bituminous mixtures. Material specifications will supersede PD 6691:2007 B/510 PD IEC/TR Guidance for production, testing and diagnostics of polymer insulators with respect to brittle fracture of core materials PEL/36 PAS 67 (Revision) Laboratory tests to determine the heating and electrical performance of heat-led microcogeneration packages primarily intended for heating dwellings will supersede PAS 67:2008 PAS 71 (Revision) Vocabulary. Nanoparticles will supersede PAS 71:2005 PAS 96 (Revision) Defending food and drink will supersede PAS 96:2008 PAS 137 Nanomaterials. Guidance on legislation and standards for SMEs DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT NATIONAL BRITISH STANDARDS You may now comment on any National British Standard online. BSI British Standards has launched a Draft Review system which allows access to the drafts of all National British Standards. To enhance access of Drafts for Public Comment for the wider community, make comments more visible and move into collaborative working practices, you will now be able to comment on any National British Standard by visiting All you need to do is register. This service is free of charge. Please note that the only standards available on this service are pure British Standards (National Standards e.g: BS XXXX). European and international documents are not included at this time. Deadlines for receipt of comments on each of the individual drafts can be found at The deadline for the following drafts is 31 March, 2010 unless otherwise stated. Should you wish to receive these drafts in hard copy format, they are available for a fee from BSI Customer Services (see How to order on page 2). 10/ DC BS Sanitary installations. Part 4. Code of practice for the provision of public toilets B/209 10/ DC BS 5930 AMD2 Code of practice for site investigations B/526/3 10/ DC BS 7722 Surface covered PVC-U profiles for windows and doorsets. Specification B/538/1 10/ DC BS Geotechnical investigation and testing. Sampling and groundwater measurements. Part 2. Qualification criteria for enterprises and personnel B/526/3 10/ DC BS Geotechnical investigation and testing. Sampling and groundwater measurements. Part 3. Conformity assessment of enterprises and personnel by third party B/526/3 DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT ADOPTIONS All Draft British Standards are available from BSI Customer Services (see How to order on page 2) Most drafts are charged at to members and to non-members. Larger draft documents are charged at a higher price according to the number of pages and are priced individually below. Comments are welcome and should be sent to Debbie Stead, Head of Committee Service Centre Operations, BSI Head Office, 389 Chiswick High Road, London W4 4AL by 31 March, 2010 unless otherwise stated, to be considered by the relevant BSI committee. Draft standards may be modified before adoption and issue as British Standards. 09/ DC BS EN ISO Geotechnical investigation and testing. Testing of geotechnical structures. Part 5. Testing of anchorages B/526/3 09/ DC BS ISO 9413 Tyre valves. Dimensions and designation members, non-members AUE/4 09/ DC BS EN ISO Ergonomics. General approach, principles and concepts PH/9 09/ DC BS EN ISO Health and safety in welding and allied processes. Sampling of airborne particles and gases in the operator s breathing zone. Part 1. Sampling of airborne particles WEE/40 09/ DC BS EN ISO Gas cylinders. High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles PVE/3/3 29 April, / DC BS ISO Road vehicles. Side impact test procedures for the evaluation of occupant interactions with side airbags by pole impact simulation AUE/15 09/ DC BS ISO Industrial trucks. Verification of stability. Part 11. Industrial variable-reach trucks MHE/7 26 Prices may be subject to change. Update Standards Feb 2010

27 09/ DC BS ISO 3450 Earth-moving machinery. Wheeled or high-speed rubber-tracked machines. Performance requirements and test procedures for brake systems B/513/1 09/ DC BS EN Railway applications. Wheel/rail friction management. Lubricants for trainborne and trackside applications RAE/3/-/6 09/ DC BS EN ISO Non-alloy steel wire rod for conversion to wire. Part 1. General requirements ISE/106 09/ DC BS EN ISO Non-alloy steel wire rod for conversion to wire. Part 2. Specific requirements for general purpose wire rod ISE/106 09/ DC BS EN ISO Non-alloy steel wire rod for conversion to wire. Part 3. Specific requirements for rimmed and rimmed substitute, low carbon steel wire rod ISE/106 09/ DC BS EN ISO Non-alloy steel wire rod for conversion to wire. Part 4. Specific requirements for wire rod for special applications ISE/106 09/ DC BS EN Nuclear power plants. Instrumentation and control important to safety. General requirements for systems members, non-members NCE/8 09/ DC BS ISO Electrically propelled road vehicles. Test specification for lithium-ion traction battery systems. Part 1. High power applications PEL/69 09/ DC BS EN AMD1 Safety of machinery. Safety requirements for the design and construction of printing and paper converting machines. Part 2. Printing and varnishing machines including pre-press machinery MCE/3/9 09/ DC BS ISO Cleaning equipment for air and other gases. Terminology MCE/21 19 March, / DC BS ISO 7186 Ductile iron products for sewage applications PSE/10 09/ DC BS EN ISO Cathodic protection of steel in concrete GEL/603 09/ DC BS EN LPG equipment and accessories. Transportable refillable welded aluminium cylinders for liquefied petroleum gas. Design and construction PVE/19 09/ DC BS ISO Geographic information. Rights expression language for geographic information. GeoREL IST/36 09/ DC BS ISO ITS CALM Mobile wireless broadband applications using communications in accordance with IEEE EPL/278 09/ DC BS EN ISO Geographic information. Linear referencing members, non-members IST/36 09/ DC BS EN 1839 Determination of explosion limits of gases and vapours FSH/23 23 April, / DC BS EN Dust explosion venting protective systems FSH/23/-/1 19 March, / DC BS ISO Ergonomics of the physical environment. Assessment by means of an environmental survey involving physical measurement of the environment and subjective responses of people PH/9/1 09/ DC BS ISO/IEC Information technology. Security techniques. Network security. Part 3. Reference network scenarios. Risks, design techniques and control issues IST/33 09/ DC BS EN ISO AMD1 Dentistry. Rotary polishers CH/106/4 09/ DC BS EN Organic light emitting diode (OLED) displays. Part 6-3. Measuring methods of image quality EPL/47 19 February, / DC BS ISO 2328 Fork-lift trucks. Hook-on type fork arms and fork arm carriages. Mounting dimensions MHE/7 09/ DC BS EN Railway applications. Track. Flash butt welding of rails. Part 3. Welding in association with crossing construction RAE/2 09/ DC BS EN Railway applications. Electrical lighting for rolling stock in public transport systems RAE/1/-/7 09/ DC BS ISO Technical product documentation. Document types TDW/4 09/ DC BS ISO Gas cylinders. Non-refillable metallic gas cylinders. Specification and test methods PVE/3/3 8 March, / DC BS ISO Building construction. Accessibility and usability of the built environment members, non-members B/ February, / DC BS ISO Buildings and building-related assets. Functional and user requirements and performance in building. Tools for assessing and comparing functional performance B/500 09/ DC BS ISO 9628 AMD1 Rolling bearings. Insert bearings and eccentric locking collars. Boundary dimensions and tolerances MCE/7 Update Standards Feb 2010 Prices may be subject to change. 27

28 Draft British Standards for Public Comment continued... 09/ DC BS ISO 2878 Rubber, vulcanized. Antistatic and conductive products. Determination of electrical resistance PRI/22 09/ DC BS ISO 1519 Paints and varnishes. Bend test (cylindrical mandrel) STI/10 28 February, / DC BS ISO Paints and varnishes. Determination of density. Part 1. Pyknometer method STI/10 28 February, / DC BS ISO Paints and varnishes. Determination of density. Part 2. Immersed body (plummet) method STI/10 28 February, / DC BS ISO Paints and varnishes. Determination of density. Part 3. Oscillation method STI/10 28 February, / DC BS ISO Paints and varnishes. Determination of density. Part 4. Pressure cup method STI/10 28 February, / DC BS ISO Fire detection and fire alarm systems. Part 24. Sound-system loudspeakers FSH/12 09/ DC BS ISO Sensory analysis. Methodology. Balanced incomplete block designs AW/12 16 April, / DC BS ISO Rubber. Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers PRI/22 09/ DC BS ISO Tractors and machinery for agriculture and forestry. Serial control and communications data network. Part 4. Network layer AGE/6 09/ DC BS ISO Space systems. Estimation of orbit lifetime ACE/68/-/3 16 April, / DC BS ISO Space systems. Space solar panels. Spacecraft charging induced electrostatic discharge test materials ACE/68/-/1 23 April, / DC BS ISO 8455 Green coffee or raw coffee. Guidelines for storage and transport AW/15 09/ DC BS ISO 4150 Green coffee. Size analysis. Manual and machine sieving AW/15 09/ DC BS ISO Green coffee. Procedure for correlation of moisture meters. Routine method AW/15 09/ DC BS ISO 6666 Coffee sampling. Triers for green and in parchment coffee AW/15 09/ DC BS ISO Instant coffee. Criteria for authenticity AW/15 09/ DC BS ISO Carbonaceous materials for the production of aluminium. Prebaked anodes. Determination of the fracture energy CII/24 09/ DC BS ISO Safety devices for protection against excessive pressure. Part 5. Controlled safety pressure-relief systems (CSPRS) PSE/18/6 8 March, / DC BS EN ISO Health and safety in welding and allied processes. Laboratory method for sampling fume and gases. Part 5. Identification of thermal-degradation products generated when welding or cutting through products composed wholly or partly of organic materials using pyrolysis-gas chromatographymass spectrometry WEE/40 09/ DC BS ISO Soil quality. Determination of selected coal-tar derived phenolic compounds using high performance liquid chromatography (HPLC) EH/4 12 April, / DC BS EN Optical fibre cables. Part Indoor optical fibre cables. Product specification for simplex and duplex cables for use in patchcords for controlled environment GEL/86/1 19 February, / DC BS ISO Financial services. Personal Identification Number (PIN) management and security. Part 1. Basic principles and requirements for PINs in card base systems IST/12 09/ DC BS ISO/IEC AMD2 Information technology. Coding of audio-visual objects. Part 27. 3D Graphics conformance IST/37 09/ DC BS ISO/IEC Information technology. Coding of audio-visual objects. Part 5. Reference software IST/37 09/ DC BS ISO Road vehicles. Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements. Part 1. General information and use case definition AUE/16 09/ DC BS ISO Building construction machinery and equipment. Portable, hand-held, internal combustion engine driven cut-off machines. Safety requirements B/513 09/ DC BS ISO Acoustics. Measurement of room acoustic parameters. Part 3. Open plan spaces EH/1 5 April, / DC BS ISO Machinery for forestry. Portable chain-saw safety requirements and testing. Part 1. Chain-saws for forest service AGE/29 09/ DC BS ISO Machinery for forestry. Portable chain-saw safety requirements and testing. Part 2. Chain-saws for tree service AGE/29 09/ DC BS ISO Thermal insulation products for building equipment and industrial installations. Determination of dimensions, squareness and linearity of preformed pipe insulation B/540/8 13 April, // DC BS ISO Thermal insulation products for building equipment and industrial installations. Determination of water vapour transmission properties of preformed pipe insulation B/540/8 6 April, Prices may be subject to change. Update Standards Feb 2010

29 09/ DC BS ISO Thermal insulation products for building equipment and industrial installations. Determination of short-term water absorption by partial immersion of preformed pipe insulation B/540/8 6 April, / DC BS ISO Thermal insulation products. Determination of trace quantities of water soluble chloride, fluoride, silicate, sodium ions and ph B/540/8 6 April, / DC BS EN AMD1 Protective clothing. Gloves and armguards protecting against cuts by powered knives. Requirements and test methods PH/3/1 17 February, / DC BS ISO Rotary shaft lip-type seals incorporating thermoplastic sealing elements. Part 1. Nominal dimensions and tolerances MCE/11 09/ DC BS ISO Rotary shaft lip-type seals incorporating thermoplastic sealing elements. Part 3. Storage, handling and installation MCE/11 09/ DC BS ISO Rotary shaft lip-type seals incorporating thermoplastic sealing elements. Part 4. Performance test procedures MCE/11 09/ DC BS ISO/IEC Information technology. Security techniques. Entity authentication. Part 6. Mechanisms using manual data transfer IST/33 09/ DC BS ISO/IEC Information technology. Security techniques. Encryption algorithms. Part 3. Block ciphers IST/33 09/ DC BS ISO Road vehicles. Communication between vehicle and external equipment for emissions-related diagnostics. Part 1. General information and use case definition AUE/16 09/ DC BS ISO Road vehicles. Implementation of WWH-OBD communication requirements. Part 2. Common data dictionary (CDD) AUE/16 09/ DC BS ISO Earth-mover tyres and rims. Part 3. Rims AUE/4 09/ DC BS ISO/IEC Information technology. Coding of audio-visual objects. Part 11. Scene description and application engine IST/37 09/ DC BS EN Dynamic modules. Part 2. Reliability qualification GEL/86/3 5 February, / DC BS EN Industrial communication networks. Fieldbus specifications. WIA-PA communication network and communication profile members, non-members AMT/7 19 February, / DC BS EN Protective clothing. Gloves with protective effect for association football goal keepers PH/3/11 12 March, / DC BS ISO/IEC Information technology. Media context and control. Part 3. Sensory information members, non-members IST/37 09/ DC BS ISO/IEC Information technology. Media context and control. Part 4. Virtual world object information IST/37 09/ DC BS ISO/IEC Information technology. Media context and control. Part 2. Control information members, non-members IST/37 09/ DC BS ISO/IEC AMD1 Information technology. Multimedia content description interface. Part 12. Query format IST/37 09/ DC BS EN Railway applications. Wheelsets and bogies. Monobloc wheels. Technical approval procedure. Part 2. Cast wheels RAE/3/-/1 09/ DC BS EN Railway applications. Wheelsets and bogies. Product requirements for cast wheels RAE/3/-/1 09/ DC BS EN Ladders. Part 2. Requirements, testing, marking B/ March, / DC BS EN ISO 8565 Metals and alloys. Atmospheric corrosion testing. General requirements ISE/NFE/8 09/ DC BS ISO 9223 Corrosion of metals and alloys. Corrosivity of atmospheres. Classification, determination and estimation ISE/NFE/8 09/ DC BS ISO 9224 Corrosion of metals and alloys. Corrosivity of atmospheres. Guiding values for the corrosivity categories ISE/NFE/8 09/ DC BS ISO 9225 Corrosion of metals and alloys. Corrosivity of atmospheres. Measurement of environmental parameters affecting corrosivity of atmospheres ISE/NFE/8 09/ DC BS ISO 9226 Corrosion of metals and alloys. Corrosivity of atmospheres. Determination of corrosion rate of standard specimens for the evaluation of corrosivity ISE/NFE/8 09/ DC BS EN Thermal and/or sound insulating products in building construction. Bound EPS ballastings. Part 1. Requirements for factory premixed EPS dry plaster PRI/72 09/ DC BS EN Thermal and/or sound insulating products in building construction. Bound EPS ballastings. Part 2. Processing of the factory premixed EPS dry plaster PRI/72 09/ DC BS EN Bitumen and bituminous binders. Determination of the distillation characteristics of cut-back and fluxed bituminous binders made with mineral fluxes PTI/13 09/ DC BS EN Explosion diverters FSH/23 19 March, / DC BS EN ISO In vitro diagnostic medical devices. Stability testing of in vitro diagnostic reagents CH/212 Update Standards Feb 2010 Prices may be subject to change. 29

30 Draft British Standards for Public Comment continued... 09/ DC BS EN Resilient floor coverings. Specifications for homogeneous and heterogeneous relief rubber floor coverings PRI/3/60 09/ DC BS EN Advanced technical ceramics. Ceramic composites. Methods of test for reinforcements. Part 7. Determination of the distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at high temperature RPI/13 09/ DC BS EN Fertilizers. Determination of 1H,2,4-triazole in urea and in fertilizers containing urea. Method using highperformance liquid chromatography (HPLC) CII/37 09/ DC BS EN Characterization of waste. Determination of calorific value B/508/3 09/ DC BS EN Bitumen and bituminous binders. Determination of adhesivity of bituminous emulsions by water immersion test PTI/13 09/ DC BS EN AMD1 Loft ladders. Requirements, marking and testing B/ March, / DC BS EN Advanced technical ceramics. Mechanical properties of ceramic fibres at high temperature in a non-reactive environment. Determination of creep behaviour by the cold end method RPI/13 09/ DC BS EN 1537 Execution of special geotechnical works. Ground anchors B/ March, / DC BS ISO Lubricants, industrial oils and related products (class L). Family E (Internal combustion engine oils). Specifications for twostroke-cycle gasoline engine oils (categories EGB, EGC and EGD) PTI/7 09/ DC BS EN ISO AMD1 Petroleum and natural gas industries. Drilling fluid materials. Specifications and tests PSE/17/-/3 09/ DC BS EN Plywood. Calculation method for some mechanical properties B/541 09/ DC BS EN Hardwood round timber. Qualitative classification. Part 1. Oak and beech B/543 09/ DC BS EN Hardwood round timber. Qualitative classification. Part 2. Poplar B/543 09/ DC BS EN Ride-on, motorized vehicles intended for the transportation of persons and not intended for use on public roads. Safety requirements. Single-track two-wheel motor vehicles AGE/6 09/ DC BS EN Gas infrastructure. Welding steel pipework. Functional requirements GSE/33 09/ DC BS EN Adjustable telescopic aluminium props. Product specifications, design and assessment by calculation and tests B/ April, / DC BS EN Maritime navigation and radiocommunication equipment and systems. Class B shipborne equipment of the automatic identification system (AIS). Part 1. Carrier-sense time division multiple access (CSTDMA) techniques EPL/80 09/ DC BS ISO 9149 Cork wallcoverings in rolls. Specifications PRI/81 09/ DC BS EN ISO/IEC Explosive atmospheres. Part 34. Application of quality systems for electrical and non-electrical equipment FSH/23 20 March, / DC BS ISO Imaging materials. Multiple media archives. Storage environment CPW/42 09/ DC BS EN Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1. Lamp caps. Amendment 45. Part 2. Lampholders. Amendment 42. Part 3. Gauges. Amendment 43 CPL/34/2 09/ DC BS EN Industrial-process measurement and control. Data structures and elements in process equipment catalogues. Part 11. List of Properties (LOP) of measuring equipment for electronic data exchange. Generic structures AMT/7 09/ DC BS ISO/IEC AMD4 Information technology. Multimedia content description interface. Part 3. Visual IST/37 29 March, / DC BS EN High-voltage switchgear and controlgear. Part 107. Alternating current fused circuit-switchers for rated voltages above 1 kv up to and including 52 kv PEL/17/1 5 February, / DC BS EN Connectors for electronic equipment. Part Detail specification for shielded, free and fixed connectors for data transmission with frequencies up to 1000 MHz EPL/48 19 February, / DC BS EN AMD2 Household and similar electrical appliances. Safety. Part Particular requirements for commercial electric deep fat fryers CPL/61/5 09/ DC BS EN Electromagnetic compatibility (EMC). Part 4-6. Testing and measurement techniques. Conducted disturbances, induced by radio-frequency fields immunity test GEL/210/12 5 February, / DC BS EN Optical fibre cables. Part Indoor optical fibre cables. Family specification for simplex and duplex cables GEL/86/1 19 February, / DC BS ISO IEC Information technology. Security techniques. Digital signature schemes giving message recovery. Part 2. Integer factorization based mechanisms IST/33 09/ DC BS EN Maritime navigation and radiocommunication equipment and systems. Digital interfaces. Part 1. Single talker and multiple listeners members, non-members EPL/80 09/ DC BS EN AMD2 Degrees of protection provided by enclosures (IP code). Proposal on IPX9 High pressure water test GEL/70 19 February, Prices may be subject to change. Update Standards Feb 2010

31 09/ DC BS ISO AMD1 Environmental labels and declarations. Self-declared environmental claims (Type II environmental labelling) SES/1/3 1 March, / DC BS IEC/TR Electromagnetic compatibility (EMC). Part 2-5. Environment. Classification of electromagnetic environments members, non-members GEL/210/12 09/ DC BS EN Electronic portable and transportable apparatus designed to detect and measure carbon dioxide and/or carbon monoxide in indoor ambient air. Requirements and test methods GEL/31/19 30 March, / DC BS EN AMD1 Safety of transportable motor-operated electric tools. Part 2-4. Particular requirements for bench grinders CPL/116 09/ DC BS EN Coaxial communication cables. Part Electrical test methods. Test for characteristic impedance, phase and group delay, electrical length and propagation velocity EPL/46 12 February, / DC BS EN Secondary batteries for the propulsion of electric road vehicles. Part 1. Performance testing for lithium-ion cells PEL/21 18 April, / DC BS EN Secondary batteries for the propulsion of electric road vehicles. Part 2. Reliability and abuse testing for lithium-ion cells PEL/21 18 April, / DC BS EN Industrial microwave heating installations. Test methods for the determination of power output PEL/27 26 February, / DC BS EN Caplights for use in mines susceptible to firedamp. Part 1. General requirements. Construction and testing in relation to the risk of explosion GEL/31 1 May, / DC BS EN Fixed capacitors for use in electronic equipment. Part 21. Sectional specification. Fixed surface mount multilayer capacitors of ceramic dielectric, Class 1 EPL/40X 26 February, / DC BS EN Fixed capacitors for use in electronic equipment. Part 22. Sectional specification. Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2 EPL/40X 26 February, / DC BS EN Packaging of components for automatic handling. Part 3. Packaging of surface mount components on continuous tapes EPL/40X 26 February, / DC BS EN Household and similar electrical appliances. Safety. Part Particular requirements for commercial electric multipurpose cooking pans CPL/61/5 09/ DC BS EN Railway applications. Three-phase train line voltage characteristics GEL/9/2 09/ DC BS EN Fibre optic interconnecting devices and passive components performance standard. Part Single mode fibre pigtailed style optical fuse for category C. Controlled environment GEL/86/2 19 February, / DC BS EN Fibre optic interconnecting devices and passive components performance standard. Part Single mode fibre plug style optical fuse for category C. Controlled environment GEL/86/2 19 February, / DC BS EN Fibre optic interconnecting devices and passive components performance standard. Part Single mode fibre pigtailed style optical power limiter for category C. Controlled environment GEL/86/2 19 February, / DC BS EN Fibre optic active components and devices. Basic test and measurement procedures. Part 3. Optical power variation induced by mechanical disturbance in optical connectors and transceiver interfaces GEL/86/3 09/ DC BS ISO/IEC Information technology. Media context and control. Part 5. Data formats for interaction devices IST/37 09/ DC BS EN Bushings above 1 kv up to 52 kv and from 250 A to 3,15 ka for liquid filled transformers PEL/36 09/ DC BS EN 2491 Aerospace series. Molybdenum disulphide dry lubricants. Coating methods ACE/12 25 March, / DC BS EN 2576 Aerospace series. Bolts, MJ threads, in heat resisting steel FE-PA2601 (A286). Classification. 900 MPa (at ambient temperature)/650ºc. Technical specification ACE/12 25 March, / DC BS EN Junction boxes for photovoltaic modules GEL/82 09/ DC BS EN 2582 Aerospace series. Bolts, MJ threads, in heat resisting nickel base alloy NI-PH1302 (Waspaloy). Classification MPa (at ambient temperature)/730ºc. Technical specification ACE/12 25 March, / DC BS EN Printed board assembly products. Manufacturing description data and transfer technology. Part 2-2. Sectional requirements for implementation of printed board fabrication data description EPL/ April, / DC BS EN Mechanical structures for electronic equipment. Tests for IEC and IEC Part 2. Seismic tests for cabinets and racks EPL/48 1 March, / DC BS EN Simplex and duplex cables to be used for cords. Part 1. Blank detail specification and minimum requirements GEL/86/1 10/ DC BS ISO/IEC Information technology. Security techniques. Guidelines for ICT readiness for business continuity IST/33 Update Standards Feb 2010 Prices may be subject to change. 31

32 Draft British Standards for Public Comment continued... 10/ DC BS EN Ladders. Part 3. Safety instructions and user information B/ April, / DC BS ISO 7271 Aluminium and aluminium alloys. Foil and thin strip. Dimensional tolerances NFE/35 30 April, / DC BS EN Pedestrian doorsets, industrial, commercial, garage doors and windows. Product standard, performance characteristics. Fire resistance and/or smoke control characteristics B/538/2/4 10 May, / DC BS EN Hardware performance sheet (HPS). Identification and summary of test evidence to facilitate the interchangeability of building hardware for application to fire resisting and smoke control doorsets and openable windows B/538/2/4 10 May, / DC BS EN Fire hazard testing. Part 6-2. Smoke obscuration. Summary and relevance of test methods GEL/89 30 April, / DC BS ISO/IEC Systems and software engineering. System and software product. Quality Requirements and Evaluation (SQuaRE). System and software quality models IST/15 30 April, / DC BS EN Vacuum cleaners for household use. Part 2. Wet cleaning appliances. Method of measuring the performance CPL/59/6 30 April, / DC BS EN AMD1 Luminaires. Part Particular requirements. Luminaires for swimming pools and similar applications CPL/34/4 30 April, 2010 DOCUMENTS NOT ISSUED AS DPCs Comments can be sent by or by post to named contacts at: BSI Head Office 389 Chiswick High Road London W4 4AL Tel: EN 15619:2008/Amendment 1 Rubber or plastic coated fabrics. Safety of temporary structures (tents). Specification for coated fabrics intended for tents and related structures The above has been issued under the CEN Unique Acceptance Procedure. Copies of the draft are available on request from the contact point (below). Contact: Deidre Fourie deidre.fourie@bsigroup.com TCI/69 EN :2007/Amendment 11 Hand-held motor-operated electric tools. Safety. Particular requirements for circular saws CENELEC has published Amendment 11 to EN :2007 which brings the existing standard in line with the new Machinery Directive by modifying sub-clause and Figure Z101 and extending Annex ZZ to include the new Machinery Directive 2006/42/EC. This will be implemented by BSI as Amendment 1 to BS EN :2007. Contact: Geraldine Salt geraldine.salt@bsigroup.com CPL/116 ISO 4898 Rigid cellular plastics. Thermal insulation products for buildings. Specifications The above document has recently been circulated at FDIS stage. Copies of the draft are available on request from the contact point (below). Contact: Committee Service Centre csc@bsigroup.com PRI/72 ISO Passenger car tyres. Verifying tyre capabilities. Laboratory test methods The above standard has been issued as FDIS following ISO systematic review. Copies are available upon request form the Programme Manager (below). Contact: Manjit Matharu manjit.matharu@bsigroup.com AUE/4 To order visit ISO Road vehicles. Direction-of-motion stereotypes for automotive hand controls The above standard has been issued as FDIS following ISO systematic review. Copies are available upon request from the Programme Manager (below). Contact: Manjit Matharu manjit.matharu@bsigroup.com AUE/12 pren 2241 Aerospace series. Lamp caps. Dimensions This standard is being circulated at CEN Formal Vote stage. The text is available on request from the contact point (below). Contact: Committee Service Centre csc@bsigroup.com ACE/6 pren Aerospace series. Cables, electrical, aircraft use. Test methods. General This standard is being circulated at CEN Formal Vote stage. The text is available on request from the contact point (below). Contact: Committee Service Centre csc@bsigroup.com ACE/6 pren 12331:2005/Amendment 1 Food processing machinery. Mincing machines. Safety and hygiene requirements This standard has been revised to accommodate modification to Annex ZA as a result of the new Safety of Machinery Directive and includes the addition of Annex ZB. It has now been submitted for combined enquiry/formal vote under the CEN Unique Acceptance Procedure. The closing date for comments is 5 April, A copy of the draft is available on request under document reference MCE/3/5. Contact: Anita Attra anita.attra@bsigroup.com MCE/3/5 pren 12984:2005/Amendment 1 Food processing machinery. Portable and/or hand-guided machines and appliances with mechanically driven cutting tools. Safety and hygiene requirements This standard has been revised to accommodate modification to Annex ZA as a result of the new Safety of Machinery Directive and includes the addition of Annex ZB. It has now been submitted for combined enquiry/formal vote under the CEN Unique Acceptance Procedure. The closing date for comments is 5 March, A copy of the draft is available on request under document reference MCE/3/5. Contact: Anita Attra anita.attra@bsigroup.com MCE/3/5 32 Prices may be subject to change. Update Standards Feb 2010

33 pren 13534:2006/Amendment 1 Food processing machinery. Curing injection machines. Safety and hygiene requirements This standard has been revised to accommodate modification to Annex ZA as a result of the new Safety of Machinery Directive and includes the addition of Annex ZB. It has now been submitted for combined enquiry/formal vote under the CEN Unique Acceptance Procedure. The closing date for comments is 5 March, A copy of the draft is available on request under document reference MCE/3/5. Contact: Anita Attra anita.attra@bsigroup.com MCE/3/5 pren 13570:2005/Amendment 1 Food processing machinery. Mixing machines. Safety and hygiene requirements This standard has been revised to accommodate modification to Annex ZA as a result of the new Safety of Machinery Directive and includes the addition of Annex ZB. It has now been submitted for combined enquiry/formal ote under the CEN Unique Acceptance Procedure. The closing date for comments is 5 March, A copy of the draft is available on request under document reference MCE/3/5. Contact: Anita Attra anita.attra@bsigroup.com MCE/3/5 pren 13870:2005/Amendment 1 Food processing machinery. Chop cutting machines. Safety and hygiene requirements This standard has been revised to accommodate modification to Annex ZA as a result of the new Safety of Machinery Directive and includes the addition of Annex ZB. It has now been submitted for combined enquiry/formal vote under the CEN Unique Acceptance Procedure. The closing date for comments is 26 March, A copy of the draft is available on request under document reference MCE/3/5. Contact: Anita Attra anita.attra@bsigroup.com MCE/3/5 pren 13871:2005/Amendment 1 Food processing machinery. Cubes cutting machinery. Safety and hygiene requirements This standard has been revised to accommodate modification to Annex ZA as a result of the new Safety of Machinery Directive and includes the addition of Annex ZB. It has now been submitted for combined enquiry/formal vote under the CEN Unique Acceptance Procedure. The closing date for comments is 26 March, A copy of the draft is available on request under document reference MCE/3/5. Contact: Anita Attra anita.attra@bsigroup.com MCE/3/5 pren 13885:2005/Amendment 1 Food processing machinery. Clipping machines. Safety and hygiene requirements This standard has been revised to accommodate modification to Annex ZA as a result of the new Safety of Machinery Directive and includes the addition of Annex ZB. It has now been submitted for combined enquiry/formal vote under the CEN Unique Acceptance Procedure. The closing date for comments is 26 March, A copy of the draft is available on request under document reference MCE/3/5. Contact: Anita Attra anita.attra@bsigroup.com MCE/3/5 prcen/ts Advanced technical ceramics. Mechanical properties of monolithic ceramics at room temperature. Method of test for edge-chip resistance This draft standard has been circulated to the UK committee RPI/13 for CEN Formal Voting which is due to close in CEN on 24 March, Copies of the draft text are available under document reference RPI/13_09_0161 from the contact point (below), to which comments must be submitted by 24 February, Contact: Committee Service Centre csc@bsigroup.com RPI/13 prcen/ts Fertilizers. Extraction and determination of elemental sulfur This draft standard has been circulated to the UK committee CII/37 for CEN Formal Voting which is due to close in CEN on 24 March, Copies of the draft text are available under document reference CII/37_09_0175 from the contact point (below), to which comments should be submitted by 24 February, Contact: Committee Service Centre csc@bsigroup.com CII/37 CEN EUROPEAN STANDARDS EUROPEAN RATIFIED TEXTS The documents listed below have recently been issued by CEN but have not yet been published as BS ENs. BSI has an obligation to adopt all ENs and to withdraw any conflicting British Standards (BSs) or parts of BSs. The following will be implemented as BS ENs or as amendments to BS ENs shortly. Notification of their implementation will be given in the BS EN Publications section of the relevant edition of Update Standards. EN 81-1:1998+A3:2009 Safety rules for the construction and installation of lifts. Electric lifts MHE/4 EN 81-2:1998+A3:2009 Safety rules for the construction and installation of lifts. Hydraulic lifts MHE/4 EN 207:2009 Personal eye-protection equipment. Filters and eye-protectors against laser radiation (laser eyeprotectors) PH/2 EN 208:2009 Personal eye-protection. Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors) PH/2 EN 453:2000+A1:2009 Food processing machinery. Dough mixers. Safety and hygiene requirements MCE/3/5 EN 454:2000+A1:2009 Food processing machinery. Planetary mixers. Safety and hygiene requirements MCE/3/5 EN 500-1:2006+A1:2009 Mobile road construction machinery. Safety. Common requirements B/513/1 EN :2005+A1:2009 Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines. Barking drums MCE/3/9 EN :1999+A1:2009 Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines. Winders and slitters, plying machines MCE/3/9 EN :2005+A1:2009 Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines. Pulpers and their loading facilities MCE/3/9 EN :2005+A1:2009 Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines. Sheeters MCE/3/9 EN :2005+A1:2009 Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines. Calender MCE/3/9 EN :2005+A1:2009 Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines. Chests MCE/3/9 EN :2005+A1:2009 Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines. Machines for de-wiring bales and units MCE/3/9 Update Standards Feb 2010 Prices may be subject to change. 33

34 CEN European Standards continued... EN :2005+A1:2009 Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines. Reel splitter MCE/3/9 EN :2005+A1:2009 Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines. Wood grinders MCE/3/9 EN :1995+A2:2009 Non-invasive sphygmomanometers. General requirements CH/205/10 EN 1076:2009 Workplace exposure. Procedures for measuring gases and vapours using pumped samplers. Requirements and test methods EH/2/2 EN : Secure storage units. Requirements, classification and methods of test for resistance to burglary. Safes, ATM safes, strongroom doors and strongrooms :November 2009 to EN :2005+A1:2009 GW/2 EN 1319:2009 Domestic gas-fired forced convection air heaters for space heating, with fan-assisted burners not exceeding a net heat input of 70 kw GSE/20/4 EN :2009 Flanges and their joints. Bolting. Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC PSE/15 EN 1673:2000+A1:2009 Food processing machinery. Rotary rack ovens. Safety and hygiene requirements MCE/3/5 EN 1674:2000+A1:2009 Food processing machinery. Dough and pastry brakes. Safety and hygiene requirements MCE/3/5 EN 1847:2009 Flexible sheets for waterproofing. Plastics and rubber sheets for roof waterproofing. Methods for exposure to liquid chemicals, including water B/546 EN :2009 Flexible sheets for waterproofing. Determination of thickness and mass per unit area. Plastic and rubber sheets B/546/2 EN : Eurocode 9. Design of aluminium structures. Structural fire design :October 2009 to EN :2007 B/525/9 EN : Eurocode 9. Design of aluminium structures. Cold-formed structural sheeting :November 2009 to EN :2007 B/525/9 EN : Eurocode 9. Design of aluminium structures. Shell structures :November 2009 to EN :2007 B/525/9 EN 2862:2009 Aerospace series. Nuts, anchor, self-locking, fixed, 90º corner, with counterbore, in alloy steel, cadmium plated, MoS2 lubricated. Classification: 1100 MPa (at ambient temperature)/235ºc ACE/12 EN 3229:2009 Aerospace series. Nuts, hexagonal, plain, reduced height, normal across flats, in steel, cadmium plated, left hand thread. Classification: 900 MPa (at ambient temperature)/235ºc ACE/12 EN :2009 Aerospace series. Weldability and brazeability of materials in aerospace constructions. Homogeneous assemblies of heat resisting Ni or Co base alloys ACE/61/-/2 EN : Flat products made of steels for pressure purposes. General requirements :December 2009 to EN :2007+A1:2009 ISE/103 EN :2009 Testing hardened concrete. Tensile splitting strength of test specimens B/517/1 EN :2009 Bituminous mixtures. Test methods for hot mix asphalt. Determination of the maximum density B/510/1 EN 12819:2009 LPG equipment and accessories. Inspection and requalification of LPG tanks greater than 13 m3 PVE/19 EN :2003+A1:2009 Machines and plants for the manufacture, treatment and processing of flat glass. Safety requirements. Tilting tables MCE/3/13 EN :2006+A1:2009 Machines and plants for the manufacture, treatment and processing of flat glass. Safety requirements. Machines and installations for stacking and de-stacking MCE/3/13 EN :2006+A1:2009 Machines and plants for the manufacture, treatment and processing of flat glass. Safety requirements. Machines for break-out MCE/3/13 EN :2006+A1:2009 Machines and plants for the manufacture, treatment and processing of flat glass. Safety requirements. Cutting machines for laminated glass MCE/3/13 EN 13195:2009 Aluminium and aluminium alloys. Specifications for wrought and cast products for marine applications (shipbuilding, marine and offshore) NFE/35 EN 13288:2005+A1:2009 Food processing machinery. Bowl lifting and tilting machines. Safety and hygiene requirements MCE/3/5 EN 13367: Ceramic machines. Safety. Transfer platforms and cars :November 2009 to EN 13367:2005+A1:2008 MCE/3/14 EN 13389:2005+A1:2009 Food processing machinery. Mixers with horizontal shafts. Safety and hygiene requirements MCE/3/5 EN 13390:2002+A1:2009 Food processing machinery. Pie and tart machines. Safety and hygiene requirements MCE/3/5 EN :2009 Coil coated metals. Test methods. Film thickness STI/27 EN 13591:2005+A1:2009 Food processing machinery. Fixed deck oven loaders. Safety and hygiene requirements MCE/3/5 EN 13670:2009 Execution of concrete structures B/525/2 EN 13684:2004+A3:2009 Garden equipment. Pedestrian controlled lawn aerators and scarifiers. Safety AGE/20 EN :2009 Railway applications. Track. Railbound construction and maintenance machines. General safety requirements RAE/2 EN 14078:2009 Liquid petroleum products. Determination of fatty methyl ester (FAME) content in middle distillates. Infrared spectrometry method PTI/13 34 Prices may be subject to change. Update Standards Feb 2010

35 EN :2009 Plastics piping systems for non-pressure drainage and sewerage. Polyester resin concrete (PRC). Manholes and inspection chambers PRI/88/2 EN :2009 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media. Combined linings with tile and brick layers ISE/110 EN 14918:2009 Solid biofuels. Method for the determination of calorific value PTI/17 EN : Railway applications. Welding of railway vehicles and components. Design requirements :December 2009 to EN :2007 RAE/1/-/2 EN 15103:2009 Solid biofuels. Determination of bulk density PTI/17 EN :2009 Solid biofuels. Determination of mechanical durability of pellets and briquettes. Pellets PTI/17 EN :2009 Railway applications. Gauges. Generalities. Common rules for infrastructure and rolling stock RAE/1/-/12 EN : Respiratory equipment. Open-circuit umbilical supplied compressed gas diving apparatus :October 2009 to EN :2008 PH/4/7 EN 15719:2009 Sanitary appliances. Baths made from impact modified coextruded ABS/acrylic sheets. Requirements and test methods B/503 EN 15720:2009 Sanitary appliances. Shower trays made from impact modified coextruded ABS/acrylic sheets. Requirements and test methods B/503 EN 15733:2009 Services of real estate agents. Requirements for the provision of services of real estate agents SVS/7/1 EN 15761:2009 Pre-shaped growing media. Determination of length, width, height, volume and bulk density AW/20 EN 15763:2009 Foodstuffs. Determination of trace elements. Determination of arsenic, cadmium, mercury and lead in foodstuffs by inductively coupled plasma mass spectrometry (ICP-MS) after pressure digestion AW/-/3 EN 15764:2009 Foodstuffs. Determination of trace elements. Determination of tin by flame and graphite furnace atomic absorption spectrometry (FAAS and GFAAS) after pressure digestion AW/-/3 EN 15765:2009 Foodstuffs. Determination of trace elements. Determination of tin by inductively coupled plasma mass spectrometry (ICP-MS) after pressure digestion AW/-/3 EN 15801:2009 Conservation of cultural property. Test methods. Determination of water absorption by capillarity B/560 EN 15802:2009 Conservation of cultural property. Test methods. Determination of static contact angle B/560 EN 15803:2009 Conservation of cultural property. Test methods. Determination of water vapour permeability (δp) B/560 EN 15805:2009 Particulate air filters for general ventilation. Standardised dimensions MCE/21/3 EN 15826:2009 Vitreous and porcelain enamels. Terminology STI/36 EN 15837:2009 Ethanol as a blending component for petrol. Determination of phosphorus, copper and sulfur content. Direct method by inductively coupled plasma optical emission spectrometry (ICP OES) PTI/13 CEN WORKSHOP AGREEMENTS CWA 15044:2009 Test and evaluation of demining machines supersedes CWA 15044: members, non-members CWA 16046:2009 Adoption programme for increased electronic invoicing in European business processes members, non-members CWA 16047:2009 E-invoicing compliance guidelines. Commentary to the compliance matrix members, non-members CWA 16048:2009 Monitoring legal requirements for cross border e-invoicing and recommendation of changes in the legal environment members, non-members CWA 16049:2009 Assessing new business processes and technologies for e-invoicing members, non-members CWA 16050:2009 A framework for the emerging network infrastructure of e-invoice service providers throughout Europe members, non-members CWA 16052:2009 ICT certification in Europe members, non-members CEN REPORTS CEN/TR 10350:2009 Analysis of steels and irons. Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials ISE/18 CEN TECHNICAL SPECIFICATIONS CEN/TS :2009 Laminated and finger jointed timber blanks and semi-finished profiles for non-structural uses. Production control B/543 CEN/TS :2009 Copper and copper alloys. Determination of tin content. Spectrophotometric method NFE/34 CEN/TS 15366:2009 Winter and road service area maintenance equipment. Solid absorbents intended for road usage B/513 CEN/TS 15956:2009 Fertilizers. Extraction of phosphorus soluble in mineral acids CII/37 CEN/TS 15957:2009 Fertilizers. Extraction of phosphorus which is soluble in neutral ammonium citrate CII/37 CEN/TS 15958:2009 Fertilizers. Extraction of water soluble phosphorus CII/37 CEN/TS 15959:2009 Fertilizers. Determination of extracted phosphorus CII/37 CEN/TS 15960:2009 Fertilizers. Extraction of total calcium, total magnesium, total sodium and total sulfur in the forms of sulfates CII/37 Update Standards Feb 2010 Prices may be subject to change. 35

36 CEN Technical Specifications continued... CEN/TS 15961:2009 Fertilizers. Extraction of water soluble calcium, magnesium, sodium and sulfur in the form of sulfates CII/37 CENELEC PUBLICATIONS EUROPEAN RATIFIED TEXTS The documents listed below have recently been issued by CENELEC but have not yet been published as BS ENs. BSI has an obligation to adopt all ENs and to withdraw any conflicting British Standards (BSs) or parts of BSs. The following will be implemented as BS ENs or as amendments to BS ENs shortly. Notification of their implementation will be given in the BS EN Publications section of the relevant edition of Update Standards. EN :2009 (IEC :2009) Rotating electrical machines. AC generators reciprocating internal combustion (RIC) engine driven generating sets PEL/2 EN 60064: (IEC 60064:1993/A5:2009) Tungsten filament lamps for domestic and similar general lighting purposes. Performance requirements AMENDMENT 5:December 2009 to EN 60064:1993 CPL/34/1 EN :2009 (IEC :2009) Explosive atmospheres Equipment protection by encapsulation m GEL/31 EN :2009 (IEC :2008) Explosive atmospheres. Equipment dust ignition protection by enclosure t GEL/31/20 EN 60112: (IEC 60112:2003/A1:2009) Method for the determination of the proof and the comparative tracking indices of solid insulating materials :December 2009 to EN 60112:2003 GEL/112 EN :2009 (IEC :2009) High-voltage fuses. Current-limiting fuses PEL/32 EN :2009 (IEC :2009) Dependability management. Application guide. Engineering of system dependability DS/1 EN : (IEC :2005/A1:2009) Appliance couplers for household and similar general purposes. Appliance couplers dependent on appliance weight for engagement :December 2009 to EN :2005 PEL/23/3 EN : Household and similar electrical appliances. Safety. Particular requirements for refrigerating appliances, ice-cream appliances and ice-makers 2:December 2009 to EN :2003 CPL/61/3 EN : (IEC :2002/A2:2009) Household and similar electrical appliances. Safety. Particular requirements for insect killers AMENDMENT 2:December 2009 to EN :2003 CPL/61/01 EN : (IEC :2002/A2:2009) Household and similar electrical appliances. Safety. Particular requirements for fixed immersion heaters AMENDMENT 2:December 2009 to EN :2003 CPL/61/07 EN : (IEC :2002/A2:2009) Household and similar electrical appliances. Safety. Particular requirements for portable immersion heaters AMENDMENT 2:December 2009 to EN :2002 CPL/61/07 EN :2009 (IEC :2008) Fixed capacitors for use in electronic equipment. Generic specification EPL/40X EN :2009 (IEC :2009) Combined flexible materials for electrical insulation. Methods of test GEL/15 EN 60644:2009 (IEC 60644:2009) Specification for high-voltage fuse-links for motor circuit application PEL/32 EN :2009 (IEC :2009) Cable networks for television signals, sound signals and interactive. Hybrid fibre coax outside plant status monitoring. Power supply to transponder interface bus (PSTIB) EPL/100 EN : Hand-held motor operated electric tools. Safety. Particular requirements for grinders, polishers and disk-type sanders 1:December 2009 to EN :2007 CPL/116 EN : Hand-held motor-operated electric tools. Safety. Particular requirements for reciprocating saws (jig and sabre saws) 2:December 2009 to EN :2003 CPL/116 EN : (IEC :1996/A2:2009) Winding wires. Test methods. General AMENDMENT 2:December 2009 to EN :1996 GEL/55 EN :2009 (IEC :2009) Winding wires. Test methods. Determination of dimensions GEL/55 EN : (IEC :2003/A1:2009) Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Specifications for individual materials. Requirements for rigid laminated sheets based on silicone resins :December 2009 to EN :2003 GEL/15/6 EN : (IEC :2003/A1:2009) Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Specifications for individual materials. Requirements for rigid laminated sheets based on polyimide resins :December 2009 to EN :2003 GEL/15/6 EN :2009 (IEC :2009) Photovoltaic devices. Reference solar devices. Procedures for establishing calibration traceability GEL/82 EN :2009 (IEC :2009) Fibre optic communication subsystem test procedures. Installed cable plant. Multimode attenuation measurement GEL/86/3 EN :2009 (IEC :2009) Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1100 V. Particular requirements and tests for switchmode power supply units and transformers for switch mode power supply units PEL/96 36 Prices may be subject to change. Update Standards Feb 2010

37 Online tool BSI Quality Management Self-assessment Ensure supply chain confidence by complying with ISO 9001 The new BSI Quality Management Self-assessment tool will give you confidence in your quality management policies and processes. It will allow you to assess your quality management system (QMS) and to record and report compliance with ISO It will help you demonstrate to your supply chain, senior management, or external auditors that you are consistently delivering high quality products and services. The standard has helped many companies: Improve the quality and consistency of their products Reduce poor quality goods being returned Build customer/supplier relationships Increase profit margins Reduce cost, production time and wastage. The tool provides a guide to the various aspects of planning, implementing, operating, checking and reviewing your system by taking the user through a question and answer session with in depth guidance material to help at every step. It will highlight what is already in place in terms of a QMS, what is working well and what is missing and/or needs attention. Reasons to subscribe to BSI Quality Management Self-assessment This new tool will help you: Build and manage an organizational structure for self-assessment by allocating sections of questions to other users Benchmark across the organization with comparison reports, show differences in compliance between sites, or report progress over time Browse relevant standards and guidance online or download full PDFs. FREE 2 WEEK TRIAL Who should use this tool? This tool is designed for all organizations that wish to implement or continue their QMS programme. It can be used by organizations of all sizes, across all sectors that are intending to establish, implement, maintain or improve their QMS. Also useful to those embarking on the route to certification, self-assessment or third party assessment. What does BSI Quality Management Self-assessment include? The BSI Quality Management Self-assessment tool is a self-contained online resource that will also give you access to a reference library including: BS EN ISO 9001:2008 Quality management systems. Requirements BS EN ISO 9000:2005 Quality management systems. Fundamentals and vocabulary Understanding ISO 9001:2008 and Process-based Management Systems Creating a Process-based Management System for ISO 9001:2008 and Beyond Process Management Auditing for ISO 9001:2008. NB: BS EN ISO 9004:2009 will be fully implemented in Subscribe now BSI Quality Management Self-assessment can provide you with the confidence that your organization has implemented a QMS supporting continual assessment and improvement in line with ISO For further information or to subscribe, visit Price: VAT Single user price valid for one year. Enterprise licences are available on request. To subscribe visit or contact BSI Customer Services quoting marketing reference code QOSAB-U Tel +44 (0) Fax +44 (0) orders@bsigroup.com raising standards worldwide Standards and publications may also be ordered via the BSI shop at *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0) BSI British Standards Institution 2010

38 CENELEC Publications continued... EN :2009 (IEC :2009) Application integration at electric utilities. System interfaces for distribution management. Interface for meter reading and control PEL/57 EN :2009 (IEC :2009) Plasma display panels. Generic specification EPL/47 EN 62080:2009 (IEC 62080:2001/A1:2008) Sound signalling devices for household and similar purposes PEL/23 EN 62083:2009 (IEC 62083:2009) Medical electrical equipment. Requirements for the safety of radiotherapy treatment planning systems CH/62/3 EN :2009 (IEC :2009) Fibre optic active components and devices. Package and interface standards. 14-pin active device modules GEL/86/3 EN :2009 (IEC :2009) Fibre optic active components and devices. Package and interface standards. Transmitter and receiver components for use with LC connector interface GEL/86/3 EN 62267:2009 (IEC 62267:2009) Railway applications. Automated urban guided transport (AUGT). Safety requirements GEL/9 EN :2009 (IEC :2009) Organic light emitting diode (OLED) displays. Generic specifications EPL/47 EN :2009 (IEC :2007) Organic light emitting diode (OLED) displays. Terminology and letter symbols EPL/47 EN :2009 (IEC :2009) Organic light emitting diode (OLED) displays. Environmental testing methods EPL/47 EN 62446:2009 (IEC 62446:2009) Grid connected photovoltaic systems. Minimum requirements for system documentation, commissioning tests and inspection GEL/82 EN 62546:2009 (IEC 62546:2009) High Definiton (HD) recording link guidelines EPL/100 EN :2009 (IEC :2009) Medical electrical equipment. Particular requirements for the basic safety and essential performance of heating devices using blankets, pads and mattresses and intended for heating in medical use CH/62/4 CENELEC REPORTS CLC/TR :2009 Railway applications. Communication, signalling and processing systems. Application guide for EN Safety assurance GEL/9/1 IEC PUBLICATIONS It is BSI policy to supply the UK version of all adopted standards, which are published as British standards, unless otherwise requested. The following IEC publications are available from BSI Customer Services (see How to order on page 2) IEC :2009 International Electrotechnical Vocabulary. Mathematics. Functions members, non-members GEL/1 IEC :2009 Safety of machinery. Electrical equipment of machines. Requirements for semiconductor fabrication equipment members, non-members MCE/3 IEC : Specifications for particular types of winding wires. Polyvinyl acetal enamelled rectangular copper wire, class 120 :December 2009 to IEC : members, non-members GEL/55 IEC : Specifications for particular types of winding wires. Polyester or polyesterimide enamelled round copper wire overcoated with polyamide, class 180 :December 2009 to IEC : members, non-members GEL/55 IEC :2009 (Edition 6) Household and similar electrical appliances. Safety. Particular requirements for vacuum cleaners and water-suction cleaning appliances members, non-members CPL/61/01 IEC :2009 (Edition 6) Household and similar electrical appliances. Safety. Particular requirements for deep fat fryers, frying pans and similar appliances members, non-members CPL/61/07 IEC :2009 (Edition 5) Household and similar electrical appliances. Safety. Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation members, non-members CPL/61/01 IEC : Household and similar electrical appliances. Safety. Particular requirements for battery chargers AMENDMENT 2:December 2009 to IEC : members, non-members CPL/61/01 IEC : Household and similar electrical appliances. Safety. Particular requirements for instantaneous water heaters AMENDMENT 2:December 2009 to IEC : members, non-members CPL/61/07 IEC : Household and similar electrical appliances. Safety. Particular requirements for pumps AMENDMENT 2:December 2009 to IEC : members, non-members CPL/61/01 IEC :2009 Medical electrical equipment. Particular requirements for the basic safety and essential performance of medical beds members, non-members CH/62/4 IEC 60891:2009 Photovoltaic devices. Procedures for temperature and irradiance corrections to measured I-V characteristics members, non-members GEL/82 IEC :2009 Photovoltaic devices. Methods of linearity measurement members, non-members GEL/82 IEC : Information technology equipment. Safety. General requirements :December 2009 to IEC : members, non-members EPL/ Prices may be subject to change. Update Standards Feb 2010

39 IEC :2009 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Composite temperature/humidity cyclic test members, non-members GEL/86/2 IEC :2009 Behavioural languages. VHDL Analog and Mixed-Signal Extensions members, non-members GEL/93 IEC :2009 Behavioural languages. System C Language Reference Manual members, non-members GEL/93 IEC :2009 Calibration of optical time-domain reflectometers (OTDR). OTDR for single mode fibres members, non-members GEL/86 IEC/TR 61838:2009 Nuclear power plants. Instrumentation and control important to safety. Use of probabilistic safety assessment for the classification of functions members, non-members NCE/8 IEC :2009 Communication networks and systems for power utility automation. Configuration description language for communication in electrical substations related to IEDs members, non-members PEL/57 IEC 61907:2009 Communication network dependability engineering members, non-members DS/1 IEC :2009 Fibre optic active components and devices. Package and interface standards. Discrete vertical cavity surface emitting laser packages members, non-members GEL/86/3 IEC/TR 62152:2009 Transmission properties of cascaded two-ports or quadripols. Background of terms and definitions members, non-members EPL/46 IEC 62493:2009 Assessment of lighting equipment related to human exposure to electromagnetic fields members, non-members CPL/34 IEC :2009 Medical electrical equipment. Medical image display systems. Evaluation methods members, non-members CH/62/2 IEC/TS :2009 Mechanical structures for electronic equipment. Thermal management for cabinets in accordance with IEC and IEC series. Design guide. Evaluation method for thermoelectrical cooling systems (Peltier effect) members, non-members EPL/48 IEC/TR 62636:2009 Multimedia home server systems. Implementation of digital rights permission code members, non-members EPL/100 ISO PUBLICATIONS It is BSI policy to supply the UK version of all adopted standards, which are published as British standards, unless otherwise requested. The following ISO publications are available from BSI Customer Services (see How to order on page 2) ISO 5-3:2009 (CD-ROM) (Edition 3) Photography and graphic technology. Density measurements. Spectral conditions members, non-members CPW/42 ISO :2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure. Unplasticized poly(vinyl chloride) (PVC-U). General members, non-members PRI/88/2 ISO :2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure. Unplasticized poly(vinyl chloride) (PVC-U). Pipes members, non-members PRI/88/2 ISO :2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure. Unplasticized poly(vinyl chloride) (PVC-U). Fittings members, non-members PRI/88/2 ISO :2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure. Unplasticized poly(vinyl chloride) (PVC U). Valves members, non-members PRI/88/2 ISO :2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure. Unplasticized poly(vinyl chloride) (PVC-U). Fitness for purpose of the system members, non-members PRI/88/2 ISO : Textiles. Quantitative chemical analysis. General principles of testing :December 2009 to ISO :2006 TCI/80 ISO 1942:2009 Dentistry. Vocabulary members, non-members CH/106 ISO 2314:2009 (Edition 3) Gas turbines. Acceptance tests members, non-members MCE/16 ISO 2531:2009 (Edition 6) Ductile iron pipes, fittings, accessories and their joints for water applications members, non-members PSE/10 ISO 2930:2009 (Edition 4) Rubber, raw natural. Determination of plasticity retention index (PRI) members, non-members PRI/50 ISO 3040:2009 (Edition 3) Geometrical product specifications (GPS). Dimensioning and tolerancing. Cones members, non-members TDW/4 ISO 3093:2009 (Edition 4) Wheat, rye and their flours, durum wheat and durum wheat semolina. Determination of the falling number according to Hagberg-Perten members, non-members AW/4 Update Standards Feb 2010 Prices may be subject to change. 39

40 ISO Publications continued... ISO 3159:2009 Timekeeping instruments. Wrist-chronometers with spring balance oscillator members, non-members STI/53 ISO : Fluid power systems. O-rings. Inside diameters, cross-sections, tolerances and designation codes CORRIGENDUM 2:November 2009 to ISO :2008 MCE/11 ISO 4080:2009 (Edition 4) Rubber and plastics hoses and hose assemblies. Determination of permeability to gas members, non-members PRI/66/-/4 ISO :2009 Agricultural machinery. Safety. Rotary tedders and rakes members, non-members AGE/32 ISO :2009 Automation systems and integration. Numerical control of machines. Program format and definitions of address words. Data format for positioning, line motion and contouring control systems members, non-members AMT/4. Is approved as suitable for use in the UK ISO 7135:2009 Earth-moving machinery. Hydraulic excavators. Terminology and commercial specifications members, non-members B/513/1 ISO/IEC 7810: Identification cards. Physical characteristics :December 2009 to ISO/IEC 7810: members, non-members IST/17 ISO/TS :2009 (CD-ROM) Data quality. Master data. Overview members, non-members AMT/4 ISO :2009 (CD-ROM) Data quality. Master data. Exchange of characteristic data. Syntax, semantic encoding, and conformance to data specification members, non-members AMT/4 ISO :2009 (CD-ROM) Data quality. Master data. Exchange of characteristic data. Provenance members, non-members AMT/4 ISO/TS :2009 (CD-ROM) Data quality. Master data. Exchange of characteristic data. Accuracy members, non-members AMT/4 ISO/TS :2009 (CD-ROM) Data quality. Master data. Exchange of characteristic data. Completeness members, non-members AMT/4 ISO 8026:2009 (Edition 3) Agricultural irrigation equipment. Sprayers. General requirements and test methods members, non-members AGE/30 ISO :2009 Acoustics. Audiometric test methods. Sound field audiometry with pure-tone and narrowband test signals members, non-members EH/1 ISO :2009 (Edition 3) Injection containers and accessories. Injection vials made of glass tubing members, non-members CH/212 ISO 9462: Alpine ski-bindings. Requirements and test methods :November 2009 to ISO 9462: members, non-members SW/136 ISO/IEC : Information technology. Font information interchange. Harmonization to Open Font Format :December 2009 to ISO/IEC :2009 IST/41 ISO/IEC :2008 (Edition 6) Information technology. Open Systems Interconnection. The Directory. Overview of concepts, models and services members, non-members IST/6 ISO/IEC :2008 (Edition 6) Information technology. Open Systems Interconnection. The Directory. Models members, non-members IST/6 ISO/IEC :2008 (Edition 6) Information technology. Open Systems Interconnection. The Directory. Abstract service definition members, non-members IST/6 ISO/IEC :2008 (Edition 6) Information technology. Open Systems Interconnection. The Directory. Procedures for distributed operation members, non-members IST/6 ISO/IEC :2008 (Edition 6) Information technology. Open Systems Interconnection. The Directory. Protocol specifications members, non-members IST/6 ISO/IEC :2008 (Edition 6) Information technology. Open Systems Interconnection. The Directory. Selected attribute types members, non-members IST/6 ISO/IEC :2008 (Edition 6) Information technology. Open Systems Interconnection. The Directory. Selected object classes members, non-members IST/6 ISO/IEC :2008 (Edition 6) Information technology. Open Systems Interconnection. The Directory. Public-key and attribute certificate frameworks members, non-members IST/6 ISO/IEC :2008 (Edition 4) Information technology. Open Systems Interconnection. The Directory. Use of systems management for administration of the Directory members, non-members IST/6 40 Prices may be subject to change. Update Standards Feb 2010

41 Key standards Occupational health and safety series In 2008, 35 million working days were lost to injury and illness caused or made worse by work. Achieving and demonstrating sound Occupational Health & Safety (OH&S) performance is essential to companies. They need to control their OH&S risks consistent with their OH&S policy and objectives. The series of standards cover OH&S management and provide organizations with the elements of an effective OH&S management system. The standards can be integrated with other management systems and help organizations achieve OH&S and economic objectives. BS OHSAS 18002:2008 Occupational health and safety management systems. Guidelines for the implementation of OHSAS 18001:2007 BS OHSAS can help an organization establish, implement or improve an OH&S management system. It also demonstrates successful implementation of BS OHSAS BS 18004:2008 Guide to occupational health and safety management BS provides guidance for an OH&S management system or the OH&S elements of an organization's overall management system to enable an organization to control its OH&S risks and improve its OH&S performance. Who should use the series of standards? OH&S directors and managers Safety practitioners Facilities managers HR directors and managers OH&S Newsletter Compliance officers Risk managers Quality managers OH&S consultants Sign up to the Occupational Health and Safety newsletter for regular updates on new standards, books and events To buy online visit or contact BSI Customer Services quoting marketing reference code OHSB-U Tel +44 (0) Fax +44 (0) raising standards worldwide Standards and publications may also be ordered via the BSI shop at *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0) BSI British Standards Institution 2010

42 ISO Publications continued... ISO/IEC :2009 (Edition 3) Information technology. Security techniques. Entity authentication. Mechanisms using zeroknowledge techniques members, non-members IST/33 ISO 9801:2009 Thermoplastics fittings. Determination of ring stiffness members, non-members CH/172/6 ISO 10130:2009 Cosmetics. Analytical methods. Nitrosamines. Detection and determination of N- nitrosodiethanolamine (NDELA) in cosmetics by HPLC, post-column photolysis and derivatization members, non-members CW/217 ISO :2009 (Edition 3) Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM). CMMs used for measuring linear dimensions members, non-members TDW/4 ISO :2009 (Edition 3) Petroleum and natural gas industries. Cements and materials for well cementing. Specification members, non-members PSE/17/-/3 ISO 10456: Building materials and products. Hygrothermal properties. Tabulated design values and procedures for determining declared and design thermal values :December 2009 to ISO 10456:2007 B/540 ISO/HL :2009 (CD-ROM) Electronic Health Record-System Functional Model. Release members, non-members IST/35 ISO :2009 Biological evaluation of medical devices. Framework for identification and quantification of potential degradation products members, non-members CH/194 ISO/TR 11636:2009 Health informatics. Dynamic on-demand virtual private network for health information infrastructure members, non-members IST/35 ISO 11701:2009 Vegetable fats and oils. Determination of phospholipids content in lecithins by HPLC using a light-scattering detector members, non-members AW/307 ISO 11702:2009 Animal and vegetable fats and oils. Enzymatic determination of total sterols content members, non-members AW/307 ISO :2009 Tractors and machinery for agriculture and forestry. Serial control and communications data network. Task controller and management information system data interchange members, non-members AGE/6 ISO/TR 12309:2009 Health informatics. Guidelines for terminology development organizations members, non-members IST/35 ISO :2009 Filters for compressed air. Methods of test. Water members, non-members MCE/8 ISO 12620:2009 Terminology and other language and content resources. Specification of data categories and management of a data category registry for language resources members, non-members TS/1 ISO :2009 Graphic technology. Safety requirements for graphic technology equipment and systems. General requirements members, non-members PAI/43 ISO/IEC :2009 Information technology. Learning, education, and training. Content packaging. Information model members, non-members IST/43 ISO :2009 Animal and vegetable fats and oils. Gas chromatography of fatty acid methyl esters. Preparation of methyl esters using trimethylsulfonium hydroxide (TMSH) members, non-members AW/307 ISO/IEC 13156:2009 Information technology. Telecommunications and information exchange between systems. High Rate 60 GHz PHY, MAC and HDMI PAL members, non-members IST/6 ISO/IEC 13560:2009 Information technology. Telecommunications and information exchange between systems. Procedure for the registration of assigned numbers for ISO/IEC and ISO/IEC members, non-members IST/6 ISO/TR :2009 Petroleum and natural gas industries. Drilling and production equipment. Deepwater drilling riser methodologies, operations, and integrity technical report members, non-members PSE/17/-/4 ISO :2009 Petroleum and natural gas industries. Design and operation of subsea production systems. Subsea umbilicals members, non-members PSE/17/-/4 ISO 13655:2009 Graphic technology. Spectral measurement and colorimetric computation for graphic arts images members, non-members PAI/43 ISO/IEC :2009 Information technology. Security techniques. Non-repudiation. Mechanisms using asymmetric techniques members, non-members IST/33 ISO 13967:2009 Thermoplastics fittings. Determination of ring stiffness members, non-members PRI/88/4 42 Prices may be subject to change. Update Standards Feb 2010

43 GOST Standards GOST standards are the regulatory basis for government and privatesector certification programs throughout the Commonwealth of Independent States (CIS). GOST and GOST R cover energy, oil and gas, environmental protection, construction, transportation, telecommunications, mining, food processing, and other industries. GOST standards have been adopted by Belarus, Ukraine, Moldova, Kazakhstan, Azerbaijan, Armenia, Kyrgyzstan, Uzbekistan, Tajikistan, Georgia and Turkmenistan. GOST R are the Russian National Standards. Thus if you are: Selling to Providing a service for a company which does business in Trading with Making investments in Any of the mentioned countries you will need to know about the relevant GOST or GOST R standard(s). To order these standards in English and Russian call the Worldwide Standards team on +44 (0) or worldwide.standards@bsigroup.com To order please worldwide.standards@bsigroup.com. For quotes and queries please or call Worldwide Standards quoting marketing reference WWSB-U Tel +44 (0) Fax +44 (0) worldwide.standards@bsigroup.com * Postage applies BSI British Standards Institution 2010 New books Guides to ISO 9001 and process-based management systems Ian Rosam and Rob Peddle New editions of three BSI bestsellers have just been published. Fully updated to reflect the revisions to ISO 9001 (requirements for quality management systems), the books build on a basic understanding of the underlying principles behind ISO 9001:2008 and behind process management. If you are planning, implementing or maintaining a quality management system, these will be a useful reference, whatever the sector/size of your organization. Understanding ISO 9001:2008 and Process-based Management Systems (second edition) This book examines the impact of process management on an organization and outlines what is required to achieve certification and put in place the foundations for business improvement. Read more and buy at Creating a Process-based Management System for ISO 9001:2008 and Beyond (second edition) This book is a practical guide to creating a process management system that meets the requirements of ISO 9001:2008 and provides a platform for achieving improved business performance. Read more and buy at Process Management Auditing for ISO 9001:2008 (second edition) This book aims to provide you with an understanding of how to deliver effective process management auditing to support ISO 9001 or any other management system. Read more and buy at To order please contact BSI Customer Services quoting marketing reference 2013B-U Tel +44 (0) Fax +44 (0) orders@bsigroup.com Standards and publications may also be ordered via the BSI shop at *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0) BSI British Standards Institution 2010

44 ISO Publications continued... ISO/IEC : Information technology. Coding of audio-visual objects. Audio :December 2009 to ISO/IEC : members, non-members IST/37. Is approved as suitable for use in the UK ISO/IEC : (CD-ROM) Information technology. Coding of audio-visual objects. Conformance testing AMENDMENT 37:December 2009 to ISO/IEC :2004 IST/37. Is approved as suitable for use in the UK ISO :2009 Zinc coatings. Guidelines and recommendations for the protection against corrosion of iron and steel in structures. General principles of design and corrosion resistance members, non-members STI/34 ISO :2009 Zinc coatings. Guidelines and recommendations for the protection against corrosion of iron and steel in structures. Hot dip galvanizing members, non-members STI/34 ISO :2009 Zinc coatings. Guidelines and recommendations for the protection against corrosion of iron and steel in structures. Sherardizing members, non-members STI/34 ISO/IEC : Information technology. Small computer system interface (SCSI). Reduced block commands (RBC) :November 2009 to ISO/IEC :2002 IST/6 ISO/IEC :2009 Information technology. Small computer system interface (SCSI). Primary commands-3 (SPC-3) members, non-members IST/6 ISO :2009 (CD-ROM) Petroleum and natural gas industries. Progressing cavity pump systems for artificial lift. Pumps members, non-members PSE/17/-/4 ISO/IEC :2009 (Edition 3) Information technology. Security techniques. Evaluation criteria for IT security. Introduction and general model members, non-members IST/33 ISO/IEC :2009 Information technology. Security techniques. Cryptographic techniques based on elliptic curves. Elliptic curve generation members, non-members IST/33 ISO :2009 Indoor air. Performance test for evaluating the reduction of formaldehyde concentrations by sorptive building materials members, non-members EH/2/3 ISO :2009 Indoor air. Performance test for evaluating the reduction of volatile organic compound (except formaldehyde) concentrations by sorptive building materials members, non-members EH/2/3 ISO/IEC 16326:2009 Systems and software engineering. Life cycle processes. Project management members, non-members IST/15 ISO 17103:2009 Agricultural machinery. Rotary disc mowers, rotary drum mowers and flail mowers. Test methods and acceptance criteria for protective skirts members, non-members AGE/32 ISO :2009 In vitro diagnostic medical devices. Information supplied by the manufacturer (labelling). Terms, definitions and general requirements members, non-members CH/212 ISO :2009 In vitro diagnostic medical devices. Information supplied by the manufacturer (labelling). In vitro diagnostic reagents for professional use members, non-members CH/212 ISO :2009 In vitro diagnostic medical devices. Information supplied by the manufacturer (labelling). In vitro diagnostic instruments for professional use members, non-members CH/212 ISO :2009 In vitro diagnostic medical devices. Information supplied by the manufacturer (labelling). In vitro diagnostic instruments for self-testing members, non-members CH/212 ISO 18592:2009 Resistance welding. Destructive testing of welds. Method for the fatigue testing of multispot-welded specimens members, non-members WEE/29 ISO/IEC :2009 Information technology. Document Schema Definition Languages (DSDL). Character Repertoire Description Language (CREPDL) members, non-members IST/41 ISO/IEC :2009 (CD-ROM) Information technology. Computer graphics, image processing and environmental data representation. Extensible 3D (X3D) encodings. Extensible Markup Language (XML) encoding members, non-members IST/31. Is approved as suitable for use in the UK ISO :2009 Petroleum and natural gas industries. Specific requirements for offshore structures. Marine operations members, non-members B/525/12 ISO/IEC 20926:2009 Software and systems engineering. Software measurement. IFPUG functional size measurement method members, non-members IST/15 ISO :2009 Workplace atmospheres. Determination of inorganic acids by ion chromatography. Volatile acids, except hydrofluoric acid (hydrochloric acid, hydrobromic acid and nitric acid) members, non-members EH/2/2 ISO 21610:2009 Corrosion of metals and alloys. Accelerated corrosion test for intergranular corrosion susceptibility of austenitic stainless steels members, non-members ISE/NFE/8 ISO 22006:2009 Quality management systems. Guidelines for the application of ISO 9001:2008 to crop production members, non-members AW/90 44 Prices may be subject to change. Update Standards Feb 2010

45 ISO 22199:2009 Electromagnetic compatibility. Product family standard for lifts, escalators and moving walks. Emission members, non-members MHE/4 ISO :2009 Plastics piping systems for hot and cold water installations. Polyethylene of raised temperature resistance (PE-RT). General members, non-members PRI/88/2 ISO :2009 Plastics piping systems for hot and cold water installations. Polyethylene of raised temperature resistance (PE-RT). Pipes members, non-members PRI/88/2 ISO :2009 Plastics piping systems for hot and cold water installations. Polyethylene of raised temperature resistance (PE-RT). Fittings members, non-members PRI/88/2 ISO :2009 Plastics piping systems for hot and cold water installations. Polyethylene of raised temperature resistance (PE-RT). Fitness for purpose of the system members, non-members PRI/88/2 ISO/TR 22957:2009 Document management. Analysis, selection and implementation of electronic document management systems (EDMS) members, non-members IDT/1/2 ISO 22958: Textiles. Water resistance. Rain tests. Exposure to a horizontal water spray :October 2009 to ISO 22958:2005 TCI/24 ISO/IEC :2009 Information technology. MPEG systems technologies. Codec configuration representation members, non-members IST/37. Is approved as suitable for use in the UK ISO/TR 23605:2009 Technical product specification (TPS). Application guidance. International model for national implementation members, non-members TDW/4 ISO 23954:2009 Oil of lime expressed. Persian type (Citrus latifolia Tanaka) members, non-members AW/54 ISO 24095:2009 Workplace air. Guidance for the measurement of respirable crystalline silica members, non-members EH/2/2 ISO 24333:2009 Cereals and cereal products. Sampling members, non-members AW/4 ISO/IEC TR 24766:2009 Information technology. Systems and software engineering. Guide for requirements engineering tool capabilities members, non-members IST/15 ISO/IEC 24786:2009 Information technology. User interfaces. Accessible user interface for accessibility settings members, non-members ICT/-/6 ISO :2009 Digital cinema (D-cinema) distribution master. Image pixel structure level 3. Serial digital interface signal formatting members, non-members CPW/36 ISO :2009 Digital cinema (D-cinema) packaging. Packing list members, non-members CPW/36 ISO :2009 Digital cinema (D-cinema) packaging. Asset mapping and file segmentation members, non-members CPW/36 ISO :2009 Digital cinema (D-cinema) packaging. Stereoscopic picture track file members, non-members CPW/36 ISO :2009 (CD-ROM) Digital cinema (D-cinema) operations. Log record format specification members, non-members CPW/36 ISO :2009 (CD-ROM) Digital cinema (D-cinema) operations. Security log event class and constraints members, non-members CPW/36 ISO :2009 Digital cinema (D-cinema) operations. Auditorium security messages for intra-theater communications members, non-members CPW/36 ISO :2009 Digital cinema (D-cinema) operations. Key delivery bundle members, non-members CPW/36 ISO 26433:2009 (CD-ROM) Digital cinema (D-cinema). XML data types members, non-members CPW/36 ISO/IEC 26907:2009 Information technology. Telecommunications and information exchange between systems. High Rate Ultra Wideband PHY and MAC Standard members, non-members IST/6 ISO/IEC 26908:2009 Information technology. Telecommunications and information exchange between systems. MAC-PHY interface for ISO/IEC members, non-members IST/6 ISO/IEC 27004:2009 Information technology. Security techniques. Information security management. Measurement members, non-members IST/33 ISO/IEC :2009 Information technology. Security techniques. Network security. Overview and concepts members, non-members IST/33 Update Standards Feb 2010 Prices may be subject to change. 45

46 ISO Publications continued... ISO 27894:2009 Vacuum technology. Vacuum gauges. Specifications for hot cathode ionization gauges members, non-members MCE/8/-/4 ISO :2009 Hand-held portable power tools. Test methods for evaluation of vibration emission. Nibblers and shears members, non-members MCE/8/-/2 ISO/IEC TR :2009 Information technology. Sharable Content Object Reference Model (SCORM ) rd Edition. Run-Time Environment Version members, non-members IST/43 ISO 27895:2009 Vacuum technology. Valves. Leak test members, non-members MCE/8/-/4 ISO/HL :2009 (CD-ROM) Health informatics. Common terminology services. Release members, non-members IST/35 ISO 28741: Road vehicles. Spark-plugs and their cylinder head housings. Basic characteristics and dimensions :December 2009 to ISO 28741:2009 MCE/9 ISO :2009 Hand-held portable power tools. Test methods for evaluation of vibration emission. Angle and vertical grinders members, non-members MCE/8/-/2 ISO :2009 Hand-held portable power tools. Test methods for evaluation of vibration emission. Wrenches, nutrunners and screwdrivers members, non-members MCE/8/-/2 ISO :2009 Hand-held portable power tools. Test methods for evaluation of vibration emission. Polishers and rotary, orbital and random orbital sanders members, non-members MCE/8/-/2 ISO :2009 Hand-held portable power tools. Test methods for evaluation of vibration emission. Drills and impact drills members, non-members MCE/8/-/2 ISO :2009 Hand-held portable power tools. Test methods for evaluation of vibration emission. Rammers members, non-members MCE/8/-/2 ISO :2009 Hand-held portable power tools. Test methods for evaluation of vibration emission. Saws, polishing and filing machines with reciprocating action and small saws with oscillating or rotating action members, non-members MCE/8/-/2 ISO :2009 Hand-held portable power tools. Test methods for evaluation of vibration emission. Scaling hammers and needle scalers members, non-members MCE/8/-/2 ISO/TS :2009 (CD-ROM) Industrial automation systems and integration. Exchange of characteristic data. Basic entities and types members, non-members AMT/4 ISO/TS :2009 (CD-ROM) Industrial automation systems and integration. Exchange of characteristic data. Characteristic data exchange format members, non-members AMT/4 ISO/TS :2009 (CD-ROM) Industrial automation systems and integration. Exchange of characteristic data. Query for characteristic data members, non-members AMT/4 ISO/IEC TR :2009 Information technology. Sharable Content Object Reference Model (SCORM ) rd Edition. Overview Version members, non-members IST/43 ISO/IEC TR :2009 Information technology. Sharable Content Object Reference Model (SCORM ) rd Edition. Content Aggregation Model Version members, non-members IST/43 ISO/IEC TR :2009 Information technology. Sharable Content Object Reference Model (SCORM ) rd Edition. Sequencing and Navigation Version members, non-members IST/43 ISO 29681:2009 Paper, board and pulps. Determination of ph of salted water extracts members, non-members PAI/11 ISO 29804:2009 Thermal insulation products for building applications. Determination of the tensile bond strength of the adhesive and of the base coat to the thermal insulation material members, non-members B/540/8 ISO/PAS PUBLICATIONS ISO/PAS 12868:2009 Geometrical product specification (GPS). Coordinate measuring machines (CMM). Testing the performance of CMMs using single-stylus contacting probing systems members, non-members TDW/4 ISO/PAS 13396:2009 Road vehicles. Sled test method to enable the evaluation of side impact protection of child restraint systems. Essential parameters members, non-members AUE/7 Please do not send confirmation of orders placed by telephone as it can lead to duplication 46 Prices may be subject to change. Update Standards Feb 2010

47 New book Energy Management Principles and Practice. A Companion to BS EN Vilnis Vesma If you need a practical and easy-to-follow introduction to the technical considerations, human factors and management aspects of energy saving in commerce, industry and the public sector, then this book is essential reading. It provides expert insights on implementing BS EN and having an effective energy management system in place. Both of which can bring about reduced energy bills and greenhouse gas emissions, plus an informed and motivated workforce. Visit the BSI website to download Chapter 1 free. Who is the book for? It is an invaluable guide for anyone looking to implement or improve an energy management system, particularly those tackling the subject for the first time, including: Energy and facilities managers Architects and surveyors Environment officers and Energy assessors managers Works engineers Energy engineers Cost reduction managers Energy consultants Students Finance directors CEOs and MDs of smaller Policy developers and managers organizations. Read more and buy at To order please visit or contact BSI Customer Services quoting marketing reference 2187B-U Tel +44 (0) Fax +44 (0) orders@bsigroup.com Standards and publications may also be ordered via the BSI shop at *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0) BSI British Standards Institution 2010 BSI Knowledge Centre Your standards resource BSI Knowledge Centre provides the following services to BSI Members: Enquiry Line information on the status, availability, scope and coverage of standards detailed database searches across current and withdrawn standards response within 1 working day Loan service borrow a wide selection of international and foreign standards Information Resources consult databases, journals and standards in our member study area. Contact us to arrange a visit Withdrawn Standards a comprehensive collection of withdrawn British Standards available to view and purchase in PDF and hardcopy For more information contact the BSI Knowledge Centre: Tel +44 (0) Fax +44 (0) knowledgecentre@bsigroup.com raising standards worldwide

48 Eurocodes Masterclasses 1-4 February 2010, BSI Headquarters, London 9-12 March 2010, Marriott Hotel, Manchester Airport, Manchester Prepare your organization for the transition from British Standards to Eurocodes by attending BSI's series of Eurocodes Masterclasses. The Eurocodes Masterclasses will provide you with detailed information about the Eurocodes most relevant to you, with a specific focus on the UK construction industry. Through case studies and discussion groups, you'll gain a full understanding of specific Eurocodes, as well as the cost and time commitments involved. Get information on the Eurocodes most relevant to you by attending one, two, three or four days of classes. A full listing of classes is available at: Who should attend? Structural engineers Civil engineers Designers Manufacturers/producers of construction products Architects. Supporting organizations: Attend the Eurocodes Masterclasses to: Learn from leading experts working with Eurocodes Understand the implementation cost and time implications to your business Discover more about the effects of the British Standards being withdrawn in March 2010 Highlight the challenges and opportunities of Eurocodes in comparison with British Standards Work on practical examples to gain a good understanding of the Eurocodes most relevant to you Enhance your knowledge about compliance with the National Annexes. Book your place today! (0) orders@bsigroup.com To book online visit or contact BSI Customer Services quoting marketing reference code CTECB-U Tel +44 (0) Fax +44 (0) orders@bsigroup.com raising standards worldwide Standards and publications may also be ordered via the BSI shop at *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 (0) BSI British Standards Institution 2010