TEST REPORT. Contact No: SAMPLE NOT DRAWN BY OUR LABORATORY. THE RESULTS RELATE ONLY TO THE ITEMS TESTED

Size: px

Start display at page:

Download "TEST REPORT. Contact No: SAMPLE NOT DRAWN BY OUR LABORATORY. THE RESULTS RELATE ONLY TO THE ITEMS TESTED"

Elinor Goodman
5 years ago
Views:

Issue No:01, Issue Date: 01-04-2017 Page 1 of 8 CIN:U74220DL1998PLC092698 Test Report Issued To: ELEVEN CARPETS(U.

11-Sep-2017 03-Oct-2017 04-Oct-2017 Customer Relationship Number 48962 Sample Description : HAND TUFTED SIZE-520X7320MM Customer Reference No : WO/PO No: Kind Attention : MR SACHIN GUPTA E-Mail:

THE RESULTS RELATE ONLY TO THE ITEMS TESTED Report Issued by Authencity of report can be verified by mail at verification@spectrolab.

1 Issue No:01, Issue Date: Page 1 of 8 CIN:U74220DL1998PLC Test Report Issued To: ELEVEN CARPETS(U.P) Test Report No: / Date of Issue: 04-Oct-2017 SHAHAWABAD, BHADOHI, UTTAR PRADESH, INDIA, , Sample Receipt Date: Date of Start of Testing: Date of Completion of Test: 11-Sep Oct Oct-2017 Customer Relationship Number Sample Description : HAND TUFTED SIZE-520X7320MM Customer Reference No : WO/PO No: Kind Attention : MR SACHIN GUPTA sachin.elevencarpets@gmail.com Contact No: NA Sample Condition : Sample Quantity (Approx) : Sample Size (Approx) : SAMPLE NOT DRAWN BY OUR LABORATORY. THE RESULTS RELATE ONLY TO THE ITEMS TESTED Report Issued by Authencity of report can be verified by mail at verification@spectrolab.in This is a Digitally Signed Report and hence doesn't require Physical Signature. Spectro Analytical Labs Limited S-1, GNEPIP, Surajpur Industrial Area,Phase-V, Kasna, Greater Noida (India) Phone : , URL : care@spectro.in BIS & DDA Approved, ISO 9001:2008, ISO 14001:2004 & OHSAS 18001:2007 Certified Laboratory Please refer to our Website for Terms & Condition

Page 2 of 8 Test Requested Steiner Tunnel Test for determining the spread of flame and Smoke developed during burning behavior of building materials.

2 Page 2 of 8 Test Requested Steiner Tunnel Test for determining the spread of flame and Smoke developed during burning behavior of building materials. Test Period Test Period Scope of Job Performing spread of flame and Smoke developed test on Carpet as per ASTM E84 16: Standard Test Method for Surface Burning Characteristics of Building Materials. Sample Receiving Date : 11 th September 2017 Test Starting Date : 3 rd October 2017 Test Completion Date : 3 rd October 2017 Product Name Carpet Hand tufted, NZ Wool & Bamboo Silk Manufacturer Eleven Carpets Test Report Issued To Eleven Carpets, Shahawabad, Post Naya Bazaar, Bhadohi , U.P., India Details of Specimen Tested Length : 7300 mm Breadth : 540 mm Thickness : 20 mm Details Verified By: HOD Fire testing department Spectro Analytical Labs Ltd.

3 Page 3 of 8 Ambient Temperature At the time of Commencement of test the Average ambient Temperature was found to be C. Sample Preparation The Carpet was fixed to the MS Channel on both sides by rivets. The Carpet was 20 mm in total thickness by 540 mm in width by 7320 mm in length. The carpet was spread over the tunnel to form the requisite specimen length. Prior to testing, the sample was conditioned to constant weight at a temperature of 73 ± 5 F (23 ± 3 C) and a relative humidity of 50 ± 5%. During testing the sample was self-supporting and the surface containing white lines was exposed to the test flame. Results and Discussion Flame Spread Result Calculated Flame Spread (CFS) Flame Spread Index 30 Smoke Developed Result Calculated Smoke Developed Smoke Developed Index 1000 Note: For Further details and observations refer to Annexure A and B

4 Annexure A CORRECTION FACTOR Page 4 of 8 CORRECTION FACTOR FOR CALCULATING FLAME SPREAD INDEX If this total area (A T ) is less than or equal to 97.5 ft min then The flame spread index shall be FSI = 0.515* A T. If the total area (A T ) is greater than 97.5 ft min then The flame spread index shall be FSI = 4900/ (195 - A T ). Here A T represents Total Area i.e. A T = A 1 + A 2 A 1 = Area Under the curve where first peak is observed. A 2 = Area just above the curve in the line of First peak point. CORRECTION FACTOR FOR CALCULATING SMOKE DEVELOPED INDEX Smoke Developed (SD) is determined by dividing the total area under the obscuration curve by that of cement board, and multiplying by 100. SD is then rounded to the nearest multiple of 5 if less than 200. SD values over 200 are rounded to the nearest multiple of 50. Smoke Developed Index = Area under the Obscuration Curve x100 Area under the Red Oak Curve

5 Page 5 of 8 OBTAINED DATA Flame Spread Data Time(minutes) Distance(Feet) 1 Ignition Flame Spread data Calculated Flame Spread (CFS) 32.7 Flame Spread Index 30 Time to Ignition (sec) Maximum Flame Spread (Ft) Area under the Flame Spread Curve (Ft. Min) 60 sec 10.0 ft ft. min Smoke Data Calculated Smoke Developed Smoke Developed Index 1000 Area under the Smoke Curve Area under Red Oak Curve 73.87

6 Page 6 of 8 ANNEXURE B GRAPHS Temperature Time Graph

7 Photographs Page 7 of 8 Photograph Exposed face before starting the test Photograph Un-Exposed face before starting the test

8 Page 8 of 8 Test Location The test was conducted at our Laboratory M/s. Spectro Analytical Labs Limited S-1 GNEPIP, Surajpur Industrial Area Kasna, Greater Noida, Phase V Gautam Budha Nagar (U.P.) Pin Code: Ph: / End of Test Report

Test Report No. AJFS FF Date: OCT.17, 2018 Page 1 of 6

Test Report No. AJFS FF Date: OCT.17, 2018 Page 1 of 6 Art3d LLC Test Report No. AJFS1809009217FF Date: OCT.17, 2018 Page 1 of 6 1600 N State Route 291 Unit 250, Sugar Creek, Missouri 64058 USA 中国认可国际互认检测 TESTING CNAS L4743 The following sample(s) was / were