Aerospace - Tube fittings for fluid systems, psi ( kpa) - Qualification specification

Transcription

1 International Standards in process An International Standard is the result of an agreement between the member bodies of. A first important step towards an International Standard takes the form of a committee draft (CD) - this is circulated for study within an technical committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same. CD registered Period from 0 May to May 20 These documents are currently under consideration in the technical committee. They have been registred at the Central Secretariat. TC 20 /CD 96 Aircraft and space vehicles Aerospace - Tube fittings for fluid systems, psi (5 000 kpa) - Qualification specification /CD 962 Aerospace - Fitting end, 24 internal cone, externa l thread, flareless type Extra fine thread pitch Inch series - Design standard /CD 659 TC 2 /DTR TC 4 /DPAS TC 45 /CD 85 TC 58 /CD 807 /CD 648 TC 6 /CD 06 Space systems Launch pad and integration site Analysis of failures Tractors and machinery for agriculture and forestry Agricultural irrigation equipment Test facilities for agricultural irrigation equipment Part 2: Test facility operating manual Acoustics Acoustics Quantities and procedures for description and measurement of underwater sound from ships Part : General requirements for measurements in deep water Rubber and rubber products Flexible cellular polymeric materials Determination of fatigue by constant-load pounding Gas cylinders Cylinders for acetylene Basic requirements Gas cylinders Refillable seamless steel gas cylinders Acoustic emission (AT) examination and follow-up ultrasonic examination (UT) for periodic inspection and testing Plastics Plastics Thermoplastic materials Determination of Vicat softening temperature (VST)

2 TC 67 /CD 50- TC 69 /CD 95- TC :2005/CD Amd TC 06 /CD 704 TC 2 /CD TC 6 /CD 42-2 /CD 42- TC 8 /CD /CD /CD TC 42 /CD 02- TC 46 /CD 7 TC 50 /CD 424- /CD 8828 TC 59 /CD TR 924- TC 72 /DTR 674 TC 9 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries Petroleum and natural gas industries Completion fluids and materials Part : Testing of heavy brines Applications of statistical methods Sampling procedures for inspection by variables Part : Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL Fire safety External fire exposure to roofs Part 2: Classification of roofs Amendment Dentistry Dentistry Polymerisation shrinkage of filling materials Anaesthetic and respiratory equipment Medical electrical equipment Part 2-67: Particular requirements for basic safety and essential performance of oxygen-conserving equipment Furniture Furniture Tests for surfaces Part 2: Assessment of resistance to wet heat Furniture Tests for surface finishes Part : Assessment of resistance to dry heat Plastics pipes, fittings and valves for the transport of fluids Plastics piping systems for the supply of gaseous fuels Unplasticized polyamide (PA-U) piping systems jointed by solvent cement Part : General Plastics piping systems for the supply of gaseous fuels Unplasticized polyamide (PA-U) piping systems jointed by solvent cement Part 2: Pipes Plastics piping systems for the supply of gaseous fuels Unplasticized polyamide (PA-U) piping systems jointed by solvent cement Part : Fittings Cleaning equipment for air and other gases Test method for assessing the performance of gas-phase air cleaning media and devices for general ventilation Part : Gas-phase air cleaning media Air quality Workplace atmospheres Personal sampling pumps Requirements and test methods Implants for surgery Implants for surgery Wear of total knee-joint prostheses Part : Loading and displacement parameters for wear-testing machines with displacement control and corresponding environmental conditions for test Implants for surgery Guidance on care and handling of orthopaedic implants Ergonomics Ergonomics of human-system interaction Part : Optical characteristics of autosterescopic displays Optics and photonics Optics and photonics Wavefront sensors for characterising optical systems and optical components Natural gas

3 /CD 452 TC 229 /DTR 04 TC 28 /CD 6559 CASCO /IEC CD TS 7022 JTC /IEC PDTR 8502 :2008/PDAM 2:2008/PDAM :2008/PDAM 4:2008/PDAM 5:2008/PDAM 6:2008/PDAM 7:2008/PDAM 8:2008/PDAM 9:2008/PDAM 0:2008/PDAM /IEC 8025:2005/P DAM /IEC CD 270 /IEC CD Natural gas Vocabulary Nanotechnologies Nanotechnologies - Guidance on physico-chemical characterization of engineered nanoscale materials for toxicologic assessment Solid biofuels Solid biofuels Terminology, definitions and descriptions Committee on conformity assessment Conformity assessment Requirements and recommendations for the content of a third-party audit report on management systems Information technology Governance ot IT - Framework and Model Information technology Open Systems Interconnection The Directory: Overview of concepts, models and services Part : Amendment : IdM support Information technology Open Systems Interconnection The Directory: Models Part 2: Amendment : IdM support Information technology Open Systems Interconnection The Directory: Abstract service definition Part : Amendment : IdM support Information technology Open Systems Interconnection The Directory: Procedures for distributed operation Part 4: Amendment : IdM support Information technology Open Systems Interconnection The Directory: Protocol specifications Part 5: Amendment : IdM support Information technology Open Systems Interconnection The Directory: Selected attribute types Part 6: Amendment : IdM support Information technology Open Systems Interconnection The Directory: Selected object classes Part 7: Amendment : IdM support Information technology Open Systems Interconnection The Directory: Public-key and attribute certificate frameworks Part 8: Amendment : IdM support Information technology Open Systems Interconnection The Directory: Replication Part 9: Amendment : IdM support Information technology Open Systems Interconnection The Directory: Use of systems management for administration of the Directory Part 0: Amendment : IdM support Information technology Environmental Data Coding Specification (EDCS) Amendment Information technology Security techniques Guidelines on the integrated implementation of /IEC 2700 and /IEC Information technology Multimedia framework (MPEG-2) Part 20: Contract Expression Language

4 /IEC CD Information technology Keyboard layouts for text and office systems Part 9: Multilingual-usage, multiscript keyboard group layouts DIS circulated Period from 0 May to May 20 These documents have obtained substantial support within the appropriate technical committee. They have been submitted to the member bodies for voting by the date shown. * Available in English only Vote terminates TC 8 7- Ships and marine technology Ships and marine technology Piping and machinery Ballast water management systems Part : Discharge sampling apparatus TC 7 Steel 60- * Structural steels Part : Technical delivery conditions for fine grain structural steels (Revision of 60:995, 60:995/Amd :200) 60-4 * Structural steels Part 4: Technical delivery conditions for high yield strength quenched and tempered structural steel plates (Revision of 60:995, 60:995/Amd :200) 7452 * Hot-rolled steel plates Tolerances on dimensions and shape (Revision of 7452:2002) TC Equipment for fire protection and fire fighting * Fire protection - Foam fire extinguishing systems Part : Foam proportioning equipment * Fire protection - Foam fire extinguishing systems Part 2: Low expansion foam equipment * Fire protection Fire extinguishing media Powder (Revision of 7202:987) TC 22 Road vehicles * Road vehicles Open Test sequence exchange format (OTX) Part : Standard

5 209- extensions and requirements Diesel engines NOx Reduction agent AUS 2 Part 5: Refilling interface for passenger cars TC 27 Solid mineral fuels 50 * Hard coal Determination of the crucible swelling number (Revision of 50:200) TC 28 Petroleum products and lubricants 0976 * Refrigerated light hydrocarbon fluids - Measurement of cargoes on board marine LNG carriers TC Small tools * Bonded abrasive products Dimensions Part 7: Mounted wheels TC 0 Measurement of fluid flow in closed conduits * Water meters intended for the metering of cold potable water and hot water Part : Metrological and technical requirements (Revision of 4064-:2005) * Water meters intended for the metering of cold potable water and hot water Part 2: Test methods (Revision of 4064-:2005) TC Tyres, rims and valves * Passenger car tyres and rims Part : Tyres (metric series) TC 7 (Revision of 4000-:200) Terminology and other language and content resources 087 * Terminology work Vocabulary (Revision of 087-:2000) TC 45 Rubber and rubber products 994 * Plastics hoses Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials Specification (Revision of 994:2007) 8029 * Plastics hose General-purpose collapsible water hose, textile-reinforced Specification (Revision of 8029:2007) 27 * Rubber, natural latex concentrate Determination of KOH number

6 (Revision of 27:995, 27:995/Amd :2006) 4656:2007/DA md TC :2007/D Amd * Rubber compounding ingredients Carbon black Determination of oil absorption number (OAN) and oil absorption number of compressed sample (COAN) Amendment Gas cylinders * Gas cylinders Cylinder valves with integrated pressure regulators Specification and type testing Amendment :999/D Amd TC 6 * Gas cylinders Refillable seamless steel tubes for compressed gas transport, of water capacity between 50 l and 000 l Design construction and testing Amendment : Requirements for design of tubes for embrittling gases Plastics * Plastics Thermoplastic polyester (TP) moulding and extrusion materials Part : Designation system and basis for specifications (Revision of 7792-:997) * Plastics Thermoplastic polyester (TP) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties (Revision of :997) 2000 Plastics/rubber Polymer dispersions and rubber latices (natural and synthetic) Definitions and review of test methods (Revision of 2000:2000) TC Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries Petroleum and natural gas industries Pipeline transportation systems Welding of pipelines (Revision of 847:2000, 847:2000/Cor :200) TC Applications of statistical methods Statistical methods in process management Capability and performance Part 6: Process capability statistics for characteristics following a multivariate normal distribution TC Internal combustion engines * Methods of test for full-flow lubricating oil filters for internal combustion engines Part 6: Static burst pressure test (Revision of :985, :985/Cor :990) * Methods of test for full-flow lubricating oil filters for internal combustion engines Part 7: Vibration fatigue test (Revision of :990) TC 79 Light metals and their alloys 092 * Titanium and titanium alloys Titanium sponge TC 85 Nuclear energy, nuclear technologies, and radiological protection

7 566- * Nuclear fuel technology Chemical separation and purification of uranium and plutonium in nitric acid solutions for isotopic and isotopic dilution analysis by solvent extraction chromatography Part : Samples containing plutonium in the microgram range and uranium in the milligram range (Revision of 566:999) TC 92 * Nuclear fuel technology Chemical separation and purification of uranium and plutonium in nitric acid solutions for isotopic and isotopic dilution analysis by solvent extraction chromatography Part 2: Samples containing plutonium and uranium in the nanogram range and below (Revision of 566:999) Fire safety Fire resistance tests Elements of building construction Part 2: Specific requirements for separating elements evaluated on less than full scale furnaces TC 94 Personal safety -- Protective clothing and equipment 227- TC * Clothing for protection against heat and flame Determination of contact heat transmission through protective clothing or constituent materials Part : Contact heat produced by heating cylinder (Revision of 227-:2007) Dentistry * Dentistry Endodontic instruments Part 2: Enlargers TC 07 (Revision of 60-2:2000) Metallic and other inorganic coatings 488 * Metallic and other inorganic coatings Test methods for measuring thermal cycle resistance and thermal shock resistance for thermal barrier coatings TC :200/D Amd 55:200/D Amd 554:200/D Amd 557:200/D Amd TC 27 Tobacco and tobacco products * Tobacco Determination of the content of total alkaloids as nicotine Continuous-flow analysis method Amendment : * Tobacco Determination of the content of reducing substances Continuous-flow analysis method Amendment : * Tobacco Determination of the content of reducing carbohydrates Continuous-flow analysis method Amendment : * Tobacco Determination of nitrate content Continuous-flow analysis method Amendment : Earth-moving machinery 665 * Earth-moving machinery Basic types Identification and terms and definitions (Revision of 665:2006) TC Plastics pipes, fittings and valves for the transport of fluids * Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing Part : General 20-0-

8 (Revision of 2262-:2007) * Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing Part 2: Pipes (Revision of :2007) * Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing Part : Fittings (Revision of 2262-:2007) * Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing Part 5: Fitness for purpose of the system (Revision of :200) TC * Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing Part 6: Code of practice for design, handling and installation (Revision of :200) Optics and photonics * Optics and photonics Environmental test methods Part : Definitions, extent of testing (Revision of 9022-:994) * Optics and photonics Environmental test methods Part 22: Combined cold, dry heat or temperature change with bump or random vibration (Revision of :994, :998, 9022-:998, :998, :998) TC 76 Quality management and quality assurance 008 * Quality management Guidelines on people involvement and competences TC :2009/DAmd :200/DAmd TC 95 Safety of toys * Safety of toys Part : Safety aspects related to mechanical and physical properties Amendment 2: Magnets Safety of toys Part 4: Swings, slides and similar activity toys for indoor and outdoor family domestic use Amendment : Inflatable activity toys Building construction machinery and equipment 5688 * Road construction and maintenance equipment Soil stabilizers Terminology and commercial specifications (Revision of 5688:200) TC 206 Fine ceramics 25 * Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for antifungal activity of semiconducting photocatalytic materials

9 TMB Technical Management Board /DGuide 8 * High level structure and identical text for management system standards and common core management system terms and definitions IULTCS International Union of Leather Technologists and Chemists Societies 7 * Leather - Identification of leather with microscopy * Leather Tests for colour fastness Colour fastness to crocking (Revision of 204:2005) CASCO /IEC DIS 7065 Committee on conformity assessment * Conformity assessment Requirements for bodies certifying products, processes and services (Revision of /IEC Guide 65:996) JTC /IEC DIS 747 Information technology * Telecommunications and information exchange between systems Short Distance Visible Light Communication (SDVLC) /IEC DIS 9899 * Programming languages C (Revision of /IEC 9899:999, /IEC 9899:999/Cor :200, /IEC 9899:999/Cor 2:2004, /IEC 9899:999/Cor :2007) FDIS circulated Period from 0 May to May 20 These Final draft International Standards have been submitted to the member bodies for formal approval by the date shown * Available in English only Vote terminates IIW /FDIS 427 International Institute of Welding * Resistance welding Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds

10 (Revision of 427:2000) TC 6 /FDIS 520 Paper, board and pulps * Pulp, paper and board Determination of pentachlorophenol in an aqueous extract (Revision of 520:200) TC 8 Ships and marine technology /FDIS * Security management systems for the supply chain Development of resilience in the supply chain Requirements with guidance for use (Revision of /PAS 28002:200) /FDIS 22 * Ships and marine technology Launching appliances for davit-launched liferafts /FDIS 4409 * Ships and marine technology Ship launching air bags TC 20 Aircraft and space vehicles /FDIS * Aerospace Electrohydrostatic actuator (EHA) Characteristics to be defined in procurement specifications (Revision of 22072:2005) /FDIS 0794 * Space systems Programme management Material, mechanical parts and processes /FDIS 0795 * Space systems Programme management Vocabulary TC 2 Equipment for fire protection and fire fighting /FDIS * Fire detection and alarm systems Part 7: Point-type smoke detectors using scattered light, transmitted light or ionization (Revision of :200) TC 22 /FDIS Road vehicles * Electrically propelled road vehicles Safety specification Part : Protection of persons against electric shock (Revision of 6469-:200, 6469-:200/Cor :200) TC 2 /FDIS 2809 Tractors and machinery for agriculture and forestry * Crop protection equipment Reciprocating positive displacement pumps and centrifugal pumps Test methods :200/FDAmd * Traveller irrigation machines Part : Operational characteristics and laboratory and field test methods Amendment /FDIS * Radiofrequency identification of animals Part 6: Representation of animal identification information (visual display/data transfer)

11 TC 28 /FDIS 77 Petroleum products and lubricants * Petroleum products Determination of base number Perchloric acid potentiometric titration method (Revision of 77:994) TC 29 /FDIS 228 Small tools * Machine bridge reamers (Revision of 228:972) TC 5 /FDIS TC 44 Paints and varnishes * Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 6: Assessment of degree of chalking by tape method (Revision of :2007) Welding and allied processes /FDIS 086 * Non-destructive testing of welds Ultrasonic testing Use of time-of-flight diffraction technique (TOFD) TC 45 Rubber and rubber products 467:2007/FDAmd * Rubber and plastics hoses and hose assemblies Methods of measurement of the dimensions of hoses and the lengths of hose assemblies Amendment : Clarification of position at which outside diameter is measured :98/FDAmd * Rubber or plastics hoses Determination of volumetric expansion Amendment : Deletion of alcohol as pressurizing fluid /FDIS 85 * Conducting and dissipative rubbers, vulcanized or thermoplastic Measurement of resistivity (Revision of 85:998) /FDIS 5600 * Rubber Determination of adhesion to rigid materials using conical shaped parts (Revision of 5600:2007) /FDIS 560 * Rubber, vulcanized Determination of adhesion to wire cord (Revision of 560:2007) /FDIS 249 * Rubber, vulcanized Determination of stress in tension upon heating /FDIS 20 * Isoprene rubber (IR) Non-oil-extended, solution-polymerized types Evaluation procedures (Revision of 20:200) TC 46 Information and documentation /FDIS 55 * Information and documentation International standard identifier for libraries and related organizations (ISIL)

12 (Revision of 55:2009) TC 6 /FDIS 0640 Plastics * Plastics Methodology for assessing polymer photoageing by FTIR and UV/visible spectroscopy /FDIS 2296 * Measurement of antibacterial activity on plastics and other non-porous surfaces (Revision of 2296:2007) /FDIS 490 TC 67 * Reinforced plastics based on unsaturated-polyester resins Determination of the residual styrene monomer content, as well as the content of other volatile aromatic hydrocarbons, by gas chromatography (Revision of 490:985) Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries /FDIS 2490 * Petroleum and natural gas industries Mechanical integrity and sizing of actuators and mounting kits for pipeline valves /FDIS * Petroleum and natural gas industries Design and operation of subsea production systems Part 5: Subsea structures and manifolds TC 69 Applications of statistical methods /FDIS 05- * Quantitative methods in process improvement Six Sigma Part : DMAIC methodology /FDIS 05-2 * Quantitative methods in process improvement Six Sigma Part 2: Tools and techniques TC 76 /FDIS Transfusion, infusion and injection, and blood processing equipment for medical and pharmaceutical use * Injection containers and accessories Part 4: Injection vials made of moulded glass (Revision of 862-4:200) /FDIS 856- * Infusion equipment for medical use Part : Infusion glass bottles (Revision of 856-:2006) TC 77 /FDIS 0904 Products in fibre reinforced cement * Fibre-cement corrugated sheets and fittings for roofing and cladding (Revision of 984:99, 99:995) TC 79 /FDIS 707 Light metals and their alloys * Magnesium and its alloys Determination of lead and cadmium /FDIS 66- * Wrought aluminium and aluminium alloys Sheets, strips and plates Part : Technical conditions for inspection and delivery

13 (Revision of 66-:986) /FDIS 66-2 * Wrought aluminium and aluminium alloys Sheets, strips and plates Part 2: Mechanical properties (Revision of 66-2:990) /FDIS 66- * Wrought aluminium and aluminium alloys Sheets, strips and plates Part : Strips: Tolerances on shape and dimensions (Revision of 66-:985) /FDIS 66-4 * Wrought aluminium and aluminium alloys Sheets, strips and plates Part 4: Sheets and plates: Tolerances on shape and dimensions (Revision of 66-4:988) /FDIS 66-5 * Wrought aluminium and aluminium alloys Sheets, strips and plates Part 5: Chemical composition TC 8 Sports and recreational equipment /FDIS 7795 * Cross-country skis Ski-binding screws Test methods (Revision of 7795:994) TC 92 /FDIS 26 Fire safety * Reaction to fire tests Measurement of material properties using a fire propagation apparatus TC 06 Dentistry 2424:2004/FDAm d * Dentistry Mercury and alloys for dental amalgam Amendment : Requirements for marking and manufacturer's instructions concerning mercury /FDIS 797- * Dentistry Shanks for rotary instruments Part : Shanks made of metals (Revision of 797-:992, 797-:992/Amd :997) /FDIS * Dentistry Dental units Part : General requirements and test methods TC 2 (Revision of 7494-:2004) Vacuum technology /FDIS 2789 * Vacuum technology Vacuum gauges Evaluation of the uncertainties of results of calibrations by direct comparison with a reference gauge (Revision of /TS 2789:2009) TC 2 /FDIS Anaesthetic and respiratory equipment * Medical electrical equipment Part 2-: Particular requirements for basic safety and essential performance of an anaesthetic workstation (Revision of IEC :200, 885-4:2004, 885-5:2004, 885-:2007, 885-2:2007)

14 TC 42 /FDIS Cleaning equipment for air and other gases * Cleaning equipment for air and other gases Terminology TC 50 /FDIS (Revision of 649:980) Implants for surgery * Implants for surgery Ultra-high-molecular-weight polyethylene Part 2: Moulded forms (Revision of 584-2:2006, 584-2:2006/CD Amd ) TC 59 /FDIS Ergonomics * Ergonomics General approach, principles and concepts TC 60 Glass in building /FDIS 254- * Glass in building Laminated glass and laminated safety glass Part : Definitions and description of component parts (Revision of 254-:998) /FDIS * Glass in building Laminated glass and laminated safety glass Part 2: Laminated safety glass (Revision of 254-2:2004) /FDIS 254- * Glass in building Laminated glass and laminated safety glass Part : Laminated glass (Revision of 254-:998) /FDIS * Glass in building Laminated glass and laminated safety glass Part 4: Test methods for durability (Revision of 254-4:998) /FDIS * Glass in building Laminated glass and laminated safety glass Part 5: Dimensions and edge finishing (Revision of 254-5:998) /FDIS * Glass in building Laminated glass and laminated safety glass Part 6: Appearance (Revision of 254-6:998) TC 72 /FDIS Optics and photonics * Microscopes Graticules for eyepieces (Revision of 944:996) TC 7 Assistive products for persons with disability /FDIS * Tips for assistive products for walking Requirements and test methods Part 2: Durability of tips for crutches

15 TC 204 /FDIS 4906 Intelligent transport systems * Electronic fee collection Application interface definition for dedicated short-range communication (Revision of 4906:2004) TC 29 /FDIS 058 Floor coverings * Resilient floor coverings Homogeneous poly(vinyl chloride) floor covering Specification /FDIS * Resilient and laminate floor coverings Determination of indentation and residual indentation Part 2: Short-term residual indentation of resilient floor covering /FDIS 244- * Resilient and laminate floor coverings Determination of indentation and residual indentation Part : Indentation of resilient semi-flexible/vinyl composition tiles TC 24 /FDIS 2877 Fisheries and aquaculture * Traceability of finfish products Specification on the information to be recorded in farmed finfish distribution chains JTC /IEC FDIS 465 Information technology * Information technology International string ordering and comparison Method for comparing character strings and description of the common template tailorable ordering /IEC/IEEE FDIS 4200 (Revision of /IEC 465:2007, /IEC 465:2007/Amd :2009, /IEC 465:2007/DAM 2) * Systems and software engineering Architecture description (Revision of /IEC 4200:2007) /IEC FDIS 07-9 * Identification cards Test methods Part 9: Optical memory cards Holographic recording method /IEC FDIS 80-4 * Information technology Personal identification -compliant driving licence Part 4: Test methods /IEC FDIS 2705 * Information technology Security techniques Information security incident management (Revision of /IEC TR 8044:2004) /IEC FDIS 2902 /IEC 88- :2007/FDAmd 5 /IEC 88- :2007/FDAmd 6 * Information technology Office equipment Method for the determination of ink cartridge photo yield for colour printing with inkjet printers and multi-function devices that contain inkjet printer components * Information technology Generic coding of moving pictures and associated audio information: Systems Part : Amendment 5: Transport of JPEG 2000 Part (ITU-T Rec T.800 /IEC 5444-) video over ITU-T Rec H /IEC 88- * Information technology Generic coding of moving pictures and associated audio information: Systems Part : Amendment 6: Extension to AVC video descriptor and signalling of operation points for MVC /IEC 598-2:2008/FDAmd 2 * Information technology Multimedia content description interface Part 2: Query format Amendment 2: Semantic enhancement

16 /IEC :2005/FDAmd * Information technology Multimedia framework (MPEG-2) Part 2: Digital Item Declaration Amendment : Presentation of digital item /IEC :2006/FDAmd 2 * Information technology Multimedia framework (MPEG-2) Part 4: Intellectual Property Management and Protection Components Amendment 2: Protection of presentation element /IEC :200/FDAmd * Information technology Multimedia application format (MPEG-A) Part 2: Interactive music application format Amendment : Conformance and reference software /IEC :200/FDAmd * Information technology MPEG video technologies Part 4: Video tool library Amendment : Video tool library conformance and reference software /IEC FDIS * Information technology Radio frequency identification device performance test methods Part : Test methods for system performance (Revision of /IEC 8046:2006) /IEC FDIS 2475 * Information technology Radio frequency identification (RFID) for item management Application protocol: encoding and processing rules for sensors and batteries /IEC FDIS * Information technology Biometric data interchange formats Part 5: Face image data (Revision of /IEC :2005, /IEC :2005/Amd :2007) /IEC FDIS * Information technology Biometric data interchange formats Part 6: Iris image data (Revision of /IEC :2005) /IEC FDIS * Information technology Biometric data interchange formats Part 9: Vascular image data (Revision of /IEC :2007) /IEC FDIS * Information technology Conformance testing methodology for biometric data interchange formats defined in /IEC 9794 Part 6: Iris image data /IEC FDIS * Information technology Conformance testing methodology for biometric data interchange formats defined in /IEC 9794 Part 7: Signature/sign time series data /IEC FDIS 2964 * Information technology Biometrics Embedded BioAPI