Packaging Recommendations for addressing consumer needs

Transcription

1 International Standards in process An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same. CD registered Period from 01 November to 30 November 2016 These documents are currently under consideration in the technical committee. They have been registred at the Central Secretariat. COPOLCO ISO/IEC CD Guide 41 TC 8 ISO/CD TC 17 ISO/DTS 7705 TC 22 ISO/CD TC 23 ISO/CD TC 28 ISO/DTR TC 29 ISO/CD 6787 ISO/CD Committee on consumer policy Packaging Recommendations for addressing consumer needs Ships and marine technology Ships and marine technology Means of recovery of persons Steel Guidelines for specifying Charpy V-notch impact prescriptions in steel specifications Road vehicles Heavy commercial vehicles and buses Centre of gravity measurements Tilt-table, axle lift, and stable pendulum test methods Tractors and machinery for agriculture and forestry Forestry machinery Portable chain-saws Non-manually actuated chain brake performance Petroleum products and related products of synthetic or biological origin Petroleum products Density vs. temperature relationships of current fuels, biofuels and biofuel components Small tools Assembly tools for screws and nuts Adjustable wrenches Assembly tools for screws and nuts Double-headed open-ended engineers' wrenches Length of wrenches and

2 thickness of the heads ISO/CD ISO/CD TC 38 ISO/CD ISO/CD TC 43 ISO/CD TC 45 ISO/CD 7781 TC 58 ISO 11515:2013/CD Amd 1 ISO/DTR TC 68 ISO/DTR TC 69 ISO/CD TC 70 ISO/CD TC 85 ISO/CD TC 92 ISO/CD TC 94 ISO/CD ISO/CD TC 117 ISO/CD TC 130 ISO/CD ISO/CD TC 156 Assembly tools for screws and nuts Double-headed, flat and offset, box wrenches Length of wrenches and thickness of the heads Assembly tools for screws and nuts Double-headed, deep offset and modified offset, box wrenches Length of wrenches and thickness of the heads Textiles Textiles Testing methods for efficiency against house dust mite Textiles Man-made fibres Determination of shape factors in cross section Acoustics Acoustics Sound absorbers for use in buildings Rating of sound absorption Rubber and rubber products Styrene-butadiene rubber, raw Determination of soap and organic-acid content Gas cylinders Gas cylinders Refillable composite reinforced tubes of water capacity between 450 L and 3000 L Design, construction and testing Amendment 1 Gas cylinders Service life testing for cylinders and tubes of composite construction Financial services Financial services Third party payment service providers Applications of statistical methods Control charts Part 7: Multivariate control charts Internal combustion engines Reciprocating internal combustion engines Exhaust emission measurement Part 6: Report of measuring results and test Nuclear energy, nuclear technologies, and radiological protection Clinical dosimetry - Dose determination of Gamma Knife radio surgery facilities Fire safety Fire resistance tests Fire dampers for air distribution systems Part 1: Mechanical dampers Personal safety -- Protective clothing and equipment Protective clothing for use in Snowboarding Wrist Protectors Requirements and test methods Wildland firefighting personal protective equipment Requirements and test methods Fans Fans Efficiency classification for fans Part 4: Driven fans at maximum operating speed Graphic technology Graphic technology Image quality evaluation methods for printed matter Part 31: Evaluation of the perceived resolution of printing systems with the contrast resolution chart Graphic technology Guidelines to determine the energy consumption of digital printing devices including transitional and related modes Corrosion of metals and alloys

3 ISO/CD TC 159 ISO/CD TC 172 ISO/CD ISO/CD ISO/CD ISO/CD TC 184 Corrosion of metals and alloys Measurement of environmentally assisted small crack growth rate Ergonomics The human-centred organization Management of ergonomic processes Optics and photonics Optics and photonics Optical coatings Part 5: Antireflecting coatings Optics and photonics Optical coatings Part 6: Reflecting coatings Optics and photonics Optical coatings Part 7: Neutral beam splitting coatings Optics and photonics Optical coatings Part 8: Coatings used for laser optics Automation systems and integration ISO/CD Industrial automation systems and integration Equivalence validation of product data Part 62: TC 185 ISO/CD TC 190 ISO/CD TC 194 ISO/CD ISO/CD TC 198 ISO/CD ISO/CD TC 204 ISO/DTR ISO/CD ISO/CD Safety devices for protection against excessive pressure Safety devices for protection against excessive pressure Part 3: Safety valves and bursting disc safety devices in combination Soil quality Soil quality Guidance on the establishment and maintenance of monitoring programmes Biological and clinical evaluation of medical devices Biological evaluation of medical devices Part 9: Framework for identification and quantification of potential degradation products Biological evaluation of medical devices Part 15: Identification and quantification of degradation products from metals and alloys Sterilization of health care products Packaging for terminally sterilized medical devices Part 1: Requirements for materials, sterile barrier systems and packaging systems Packaging for terminally sterilized medical devices Part 2: Validation requirements for forming, sealing and assembly processes Intelligent transport systems Intelligent transport systems Use of nomadic and portable devices to support ITS service and multimedia provision in vehicles Part 2: Definition and use cases for mobile service convergence Intelligent transport systems Framework for cooperative telematics applications for regulated commercial freight vehicles (TARV) Part 21: Monitoring of regulated vehicles using roadside sensors and data collected from the vehicle for enforcement and other purposes Intelligent transport systems - Shareable geospatial database for ITS applications ISO/DTS Intelligent transport systems Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) Part 7: Location referencing container (TPEG2-LOC) ISO/DTS Intelligent transport systems Traffic and travel information (TTI) via transport protocol expert group, generation 2 (TPEG2) Part 22: OpenLR location referencing (TPEG2-OLR) TC 207 ISO/CD TC 213 ISO/DTR Environmental management Monetary valuation of environmental impacts from specific emissions and use ofnatural resources Principles, requirements and guidelines Dimensional and geometrical product specifications and verification Technical product specification (TPS) Application guidance International model for national implementation

4 TC 219 ISO/CD TC 249 ISO/CD ISO/CD TC 268 ISO/CD ISO/CD TC 282 ISO/CD TC 292 ISO/CD ISO/CD TC 301 ISO/CD JTC 1 ISO/IEC PDTR ISO/IEC CD ISO/IEC :2015/PDAM 9 ISO/IEC 14492:2001/PDAM 4 ISO/IEC /PDAM 1 ISO/IEC :2007/PDAM 4 ISO/IEC /PDAM 2 ISO/IEC PDTR ISO/IEC CD ISO/IEC :2016/PDAM 1 ISO/IEC :2016/PDAM 1 Floor coverings Resilient and textile floor-coverings Determination of side length, edge straightness and squareness of tiles Traditional chinese medicine Traditional Chinese medicine General requirements for the manufacturing process of natural products used in and as traditional Chinese medicine (TCM) Traditional Chinese medicine Labelling requirements of products intended for oral or topical use in and as traditional Chinese medicine (TCM) Sustainable cities and communities Sustainable development of communities Indicators for city services and quality of life Smart communitiy infrastructures Maturity model for assessment and improvement Water reuse Guidelines for performance evaluation of treatment technologies for water re-use systems Part 1: General Security and resilience Security and resilience Emergency management Guidelines for monitoring facilities with identified hazards Security and resilience Community resilience Guidelines for supporting community response to vulnerable people Energy management and energy savings General quantification methods for ex ante or expected energy savings Information technology Information technology Generic cabling systems for customer premises Part 9905: Guidelines for the use of installed cabling to support 25GBASE-T application Information technology Security techniques Competence requirements for information security testers and evaluators Part 1: Introduction, concepts and general requirements Information technology Generic coding of moving pictures and associated audio information Part 1: Systems Amendment 9: Ultra-Low Latency and 4k and higher resolution support for transport of JPEG 2000 video Information technology Lossy/lossless coding of bi-level images Amendment 4 Information technology Coding of audio-visual objects Part 15: Carriage of network abstraction layer (NAL) unit structured video in the ISO base media file format Amendment 1: Handling of unspecified NAL unit types and other improvements Information technology MPEG audio technologies Part 1: MPEG Surround Amendment 4: Reference software for MPEG surround extension for 3D audio Information technology High efficiency coding and media delivery in heterogeneous environments Part 2: High efficiency video coding Amendment 2: Main 10 still picture profile Information technology High efficiency coding and media delivery in heterogeneous environments Part 14: Conversion and coding practices for HDR/WCG Y'CbCr 4:2:0 video with PQ transfer characteristics Biometrics interoperability profiles Best practices for slap tenprint captures Information technology Data centres Key performance indicators Part 2: Power usage effectiveness (PUE) Amendment 1 Information technology Data centres Key performance indicators Part 3: Renewable energy factor (REF) Amendment 1

5 DIS circulated Period from 01 November to 30 November 2016 These documents have obtained substantial support within the appropriate ISO technical committee. They have been submitted to the ISO member bodies for voting by the date shown. * Available in English only Vote terminates TC 4 Rolling bearings ISO 76:2006/DAmd 1 * Rolling bearings Static load ratings Amendment TC 8 Ships and marine technology ISO/DIS * Ships and marine technology Marine environment protection Management and handling of shipboard garbage (Revision of ISO 21070:2011) ISO/DIS * Ships and marine technology General requirements for inclinometers used for determination of trim and list of LNG carriers TC 10 Technical product documentation ISO/DIS * Technical product documentation (TPD) Presentation of dimensions and tolerances Part 5: Dimensioning of structural metal work ISO/DIS 6413 * Technical product documentation Representation of splines and serrations (Revision of ISO 6413:1988) TC 17 Steel ISO/DIS * Steels Determination of total silicon contents Reduced molybdosilicate spectrophotometric method Part 1: Silicon contents between 0,05 % and 1,0 % (Revision of ISO :1986) ISO/DIS * Hot-dip galvanized and zinc-aluminium coated high tensile steel wire for bridge cables Specifications TC 20 Aircraft and space vehicles ISO/DIS * Space systems General quality and safety requirements for space test centers

6 ISO/DIS * Space systems Guidelines for the management of systems engineering processes TC 21 Equipment for fire protection and fire fighting ISO/DIS * Fire detection and fire alarm systems Part 5: Point type heat detectors (Revision of ISO :2012) ISO/DIS * Fire detection and alarm systems Part 27: Point type fire detectors using a smoke sensor in combination with a carbon monoxide sensor and, optionally, one or more heat sensors (Revision of ISO :2009) TC 22 Road vehicles ISO/DIS * Road vehicles Vehicle to grid communication interface Part 4: Network and application protocol conformance test ISO/DIS * Road vehicles Test devices for target vehicles, vulnerable road users and other objects, for assessment of active safety functions Part 1: Requirements for passenger vehicle rear-end targets ISO/DIS * Road vehicles Test devices for target vehicles, vulnerable road users and other objects, for assessment of active safety functions Part 2: Requirements for pedestrian targets ISO 6487:2015/DAmd 1 * Road vehicles Measurement techniques in impact tests Instrumentation Amendment TC 29 Small tools ISO/DIS * Solid hardmetal end mills with cylindrical shank Dimensions (Revision of ISO 10911:2010) TC 31 Tyres, rims and valves ISO/DIS * Earth-mover tyres and rims Part 1: Tyre designation and dimensions (Revision of ISO :2014) TC 34 Food products ISO/DIS * Microbiology of the food chain Horizontal methods for sampling techniques from surfaces using contact plates and swabs (Revision of ISO 18593:2004) TC 38 Textiles ISO/DIS * Textiles Quantitative chemical analysis Part 4: Mixtures of certain protein and certain other fibres (method using hypochlorite) (Revision of ISO :2006) ISO/DIS * Textiles Quantitative chemical analysis Part 7: Mixtures of polyamide and certain other fibres (method using formic acid)

7 (Revision of ISO :2006) ISO/DIS * Textiles Quantitative chemical analysis Part 11: Mixtures of certain cellulose fibres with certain other fibres (method using sulfuric acid) (Revision of ISO :2006) TC 58 Gas cylinders ISO/DIS * Gas cylinders Residual pressure valves Specification and type testing of cylinder valves incorporating residual pressure devices (Revision of ISO 15996:2005, ISO 15996:2005/Amd 1:2007) TC 68 Financial services ISO/DIS * Banking and related financial services Key wrap TC 71 Concrete, reinforced concrete and pre-stressed concrete ISO/DIS * Guidelines for the simplified desing of prestressed concrete tanks for potable water TC 79 Light metals and their alloys ISO/DIS 2135 * Anodizing of aluminium and its alloys Accelerated test of light fastness of coloured anodic oxidation coatings using artificial light (Revision of ISO 2135:2010) ISO/DIS 2143 * Anodizing of aluminium and its alloys Estimation of loss of absorptive power of anodic oxidation coatings after sealing Dye-spot test with prior acid treatment (Revision of ISO 2143:2010) ISO/DIS * Anodizing of aluminium and its alloys Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in acid solution(s) (Revision of ISO 3210:2010) ISO/DIS * Anodizing of aluminium and its alloys Instrumental determination of image clarity of anodic oxidation coatings Instrumental method (Revision of ISO 10216:2010, ISO 10216:2010/Cor 1:2011) TC 83 Sports and other recreational facilities and equipment ISO/DIS * Public swimming pools Computer vision systems for the detection of drowning accidents in swimming pools Safety requirements and test methods TC 84 Devices for administration of medicinal products and catheters ISO/DIS * Sterile hypodermic syringes for single use Part 3: Auto-disabled syringes for fixed-dose immunization (Revision of ISO :2005) TC 85 Nuclear energy, nuclear technologies, and radiological protection ISO/DIS * Radiological protection Measurement for the clearance of waste contaminated with ra-

8 dioisotopes for medical application Part 1: Measurement of radioactivity TC 94 Personal safety -- Protective clothing and equipment ISO/DIS * Protective clothing for firefighter's who are engaged in support activities associated with structural fire fighting Laboratory test methods and performance (Revision of ISO 11613:1999) ISO/DIS * Protective clothing for firefighters Laboratory test methods and performance requirements for wildland firefighting clothing (Revision of ISO 15384:2003) ISO/DIS * PPE for firefighters undertaking specific rescue activities Part 1: General ISO/DIS * PPE ensembles for firefighters undertaking specialist rescue activities Part 3: Clothing TC 107 Metallic and other inorganic coatings ISO/DIS * Vitreous and porcelain enamels Determination of resistance to chemical corrosion Part 3: Determination of resistance to chemical corrosion by alkaline liquids using a hexagonal vessel or a tetragonal glass bottle (Revision of ISO :2008) TC 108 Mechanical vibration, shock and condition monitoring ISO/DIS * Mechanical vibration Measurement and evaluation of machine vibration Part 5: Machine sets in hydraulic power generating and pump-storage plants (Revision of ISO :2000, ISO :2005) ISO/DIS * Methods for the calibration of vibration and shock transducers Part 44: Calibration of field vibration calibrators TC 118 ISO :2009/DAmd 1 Compressors and pneumatic tools, machines and equipment * Hand-held portable power tools Test methods for evaluation of vibration emission Part 2: Wrenches, nutrunners and screwdrivers Amendment 1: Changes in annex C Brake device ISO :2010/DAmd 1 * Hand-held portable power tools Test methods for evaluation of vibration emission Part 4: Straight grinders Amendment 1: Cupped wire brushes TC 120 Leather ISO/DIS * Leather Pickled sheep pelts Guidelines for grading on the basis of defect and size ISO/DIS * Leather Guidelines for packaging of wet blue leather TC 127 ISO 7131:2009/DAmd 1 Earth-moving machinery * Earth-moving machinery Loaders Terminology and commercial specifications Amendment TC 130 Graphic technology

9 ISO/DIS * Graphic technology Blankets for offset printing (Revision of ISO 12636:1998) ISO/DIS * Graphic technology Guidelines to determine the operating power consumption of digital printing devices TC 132 Ferroalloys ISO/DIS 5446 * Ferromanganese Specification and conditions of delivery (Revision of ISO 5446:1980) TC 159 Ergonomics ISO/DIS * Ergonomics of human-system interaction Part 11: Usability: Definitions and concepts (Revision of ISO :1998) TC 171 Document management applications ISO/DIS * Document management applications Archiving of electronic data Computer output microform (COM) / Computer output laser disc (COLD) (Revision of ISO 11506:2009) TC 172 Optics and photonics ISO/DIS * Ophthalmic optics Contact lenses and contact lens care products Determination of preservative uptake and release (Revision of ISO 11986:2010) TC 190 Soil quality ISO/DIS * Soil quality Sampling of soil invertebrates Part 1: Hand-sorting and extraction of earthworms (Revision of ISO :2006) TC 198 Sterilization of health care products ISO/DIS * Sterilization of health care products Biological and chemical indicators Test equipment (Revision of ISO 18472:2006) TC 201 Surface chemical analysis ISO/DIS * Surface chemical analysis Secondary ion mass spectrometry Correction method for saturated intensity in single ion counting dynamic secondary ion mass spectrometry TC 202 Microbeam analysis ISO/DIS * Microbeam analysis Analytical transmission electron microscopy Determination method for interface position in the cross-sectional image of the layered materials TC 204 Intelligent transport systems ISO/DIS * Electronic fee collection Evaluation of equipment for conformity to ISO Part

10 1: Test suite structure and test purposes (Revision of ISO/TS :2011) ISO/DIS * Intelligent transport systems Cooperative ITS Part 1: Roles and responsibilities in the context of co-operative ITS architecture(s) (Revision of ISO/TS 17427:2014) TC 206 Fine ceramics ISO/DIS * Fine ceramics (advanced ceramics, advanced technical ceramics) Methods of test for reinforcements Determination of tensile properties of filaments at ambient temperature ISO/DIS * Fine ceramics (advanced ceramics, advanced technical ceramics) Ceramic composites Notations and symbols ISO/DIS * Fine ceramics (advanced ceramics, advanced technical ceramics) Silicon nitride materials for rolling bearing balls and rollers (Revision of ISO 26602:2009) TC 219 Floor coverings ISO/DIS * Textile floor coverings Test methods for the determination of fibre bind using a modified martindale machine (Revision of ISO 11856:2014) TC 232 Learning services outside formal education ISO/DIS * Learning services outside formal education Service requirements (Revision of ISO 29990:2010) TC 261 ISO/ASTM DIS Additive manufacturing * Guidelines for additive manufacturing design IULTCS International Union of Leather Technologists and Chemists Societies ISO/DIS 4098 * Leather Chemical tests Determination of water-soluble matter, water-soluble inorganic matter and water-soluble organic matter (Revision of ISO 4098:2006) JTC 1 Information technology ISO/IEC DIS * Information technology Office machines Destruction of data carriers Part 1: Principles and definitions ISO/IEC DIS * Information technology Office machines Destruction of data carriers Part 2: Requirements for equipment for destruction of data carriers ISO/IEC DIS * Information technology Office machines Destruction of data carriers Part 3: Process of destruction of data carriers ISO/IEC DIS * Information technology Underwater acoustic sensor network (UWASN) Part 1: Overview and requirements

11 ISO/IEC DIS * Information technology Underwater acoustic sensor network (UWASN) Part 2: Reference architecture ISO/IEC /DAmd 1 * Information technology High efficiency coding and media delivery in heterogeneous environments Part 5: Reference software for high efficiency video coding Amendment 1: Reference software for screen content coding extensions ISO/IEC DIS * Information technology Extensions of Office Open XML file formats Part 2: Character repertoire checking ISO/IEC DIS Information technology Conformance testing for BioAPI Part 1: Methods and procedures (Revision of ISO/IEC :2007) FDIS circulated Period from 01 November to 30 November 2016 These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date shown * Available in English only Vote terminates TC 4 Rolling bearings ISO/FDIS * Rolling bearings Linear motion rolling bearings Part 1: Dynamic load ratings and rating life (Revision of ISO :2004) ISO/FDIS * Rolling bearings Linear motion rolling bearings Part 2: Static load ratings (Revision of ISO :2004) TC 8 Ships and marine technology ISO/FDIS * Ships and marine technology Specification for bunkering of liquefied natural gas fuelled vessels ISO/FDIS * Ships and marine technology Manoeuvring of ships Part 1: General concepts, quantities and test conditions (Revision of ISO :2013)

12 ISO/FDIS * Ships and marine technology Manoeuvring of ships Part 2: Turning and yaw checking (Revision of ISO :2013) ISO/FDIS * Ships and marine technology Manoeuvring of ships Part 3: Yaw stability and steering (Revision of ISO :2013) ISO/FDIS * Ships and marine technology Manoeuvring of ships Part 4: Stopping, acceleration, traversing (Revision of ISO :2013) ISO/FDIS * Ships and marine technology Manoeuvring of ships Part 5: Submarine specials (Revision of ISO :2013) ISO/FDIS * Ships and marine technology Manoeuvring of ships Part 6: Model test specials (Revision of ISO :2013) TC 17 Steel ISO/FDIS 4885 * Ferrous materials Heat treatments Vocabulary (Revision of ISO 4885:1996) ISO/FDIS * Non-alloy steel wire rod for conversion to wire Part 2: Specific requirements for general purpose wire rod (Revision of ISO :2011) TC 20 Aircraft and space vehicles ISO/FDIS * Aircraft ground handling Checked baggage Part 1: Mass and dimensions ISO/FDIS * Aerospace Cleanliness classification for hydraulic fluids (Revision of ISO 11218:1993) ISO/FDIS * Space systems Programme management Management of product characteristics TC 21 Equipment for fire protection and fire fighting ISO/FDIS * Fire protection Automatic sprinkler systems Part 13: Requirements and test methods for extended-coverage sprinklers TC 22 Road vehicles ISO/FDIS * Road vehicles Ergonomic aspects of transportation and control systems Dialogue management principles and compliance procedures (Revision of ISO 15005:2002)

13 ISO/FDIS * Road vehicles Ergonomic aspects of transport information and control systems Specifications and test procedures for in-vehicle visual presentation (Revision of ISO 15008:2009) ISO/FDIS * Road vehicles Liquefied natural gas (LNG) fuel system components Part 19: Automatic valve ISO/FDIS * Road vehicles Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blend fuel system components Part 6: Automatic valve TC 25 Cast irons and pig irons ISO/FDIS * Compacted (vermicular) graphite cast irons Classification (Revision of ISO 16112:2006) TC 28 Petroleum products and related products of synthetic or biological origin ISO/FDIS 6246 * Petroleum products Gum content of fuels Jet evaporation method (Revision of ISO 6246:1995, ISO 6246:1995/Cor 1:1998) ISO/FDIS * Petroleum and liquid petroleum products Calibration of horizontal cylindrical tanks Part 1: Manual methods (Revision of ISO :2002, ISO :2002/Cor 1:2009) ISO/FDIS * Petroleum products Fuels (class F) classification Part 1: Categories of marine fuels (Revision of ISO :2010) ISO/FDIS 8217 * Petroleum products Fuels (class F) Specifications of marine fuels (Revision of ISO 8217:2012) TC 29 Small tools ISO/FDIS 494 * Cylindrical shank twist drills Long series (Revision of ISO 494:2009) ISO/FDIS 529 * Short machine taps and hand taps (Revision of ISO 529:1993) ISO/FDIS 1832 * Indexable inserts for cutting tools Designation (Revision of ISO 1832:2012) ISO/FDIS 2250 * Finishing reamers for Morse and metric tapers, with cylindrical shanks and Morse taper shanks (Revision of ISO 2250:2009)

14 ISO/FDIS 2284 * Hand taps for parallel and taper pipe threads General dimensions and marking (Revision of ISO 2284:1987) ISO/FDIS 5468 * Rotary and rotary impact masonry drill bits with hardmetal tips Dimensions (Revision of ISO 5468:2006) TC 34 Food products ISO/FDIS * Microbiology of the food chain Horizontal method for determination of hepatitis A virus and norovirus using real-time RT-PCR Part 1: Method for quantification (Revision of ISO/TS :2013) ISO/FDIS 6320 * Animal and vegetable fats and oils Determination of refractive index (Revision of ISO 6320:2000) TC 35 Paints and varnishes ISO/FDIS * Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens Part 4: Examples of spectra of polymer-coated and uncoated specimens (Revision of ISO :2009) ISO/FDIS * Preparation of steel substrates before application of paints and related products Surface roughness characteristics of blast-cleaned steel substrates Part 5: Replica tape method for the determination of the surface profile (Revision of ISO :2003) TC 39 Machine tools ISO/FDIS * Machines tools Test conditions for universal spindle heads Part 1: Accessory heads for machines with horizontal spindle (horizontal Z-axis) TC 41 Pulleys and belts (including veebelts) ISO/FDIS * Steel cord conveyor belts Part 3: Special safety requirements for belts for use in underground installations (Revision of ISO :2007) TC 44 Welding and allied processes ISO/FDIS * Welding Arc stud welding of metallic materials (Revision of ISO 14555:2014) TC 45 Rubber and rubber products ISO/FDIS 6806 * Rubber hoses and hose assemblies for use in oil burners Specification (Revision of ISO 6806:2014) TC 46 Information and documentation ISO/FDIS * Information and documentation The Dublin Core metadata element set Part 1: Core

15 elements (Revision of ISO 15836:2009) TC 58 ISO 10297:2014/FDAmd 1 Gas cylinders * Gas cylinders Cylinder valves Specification and type testing Amendment 1: Pressure drums and tubes TC 61 Plastics ISO/FDIS * Plastics Polyamide (PA) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties (Revision of ISO :2012) ISO/FDIS * Plastics Thermoplastic polyester (TP) moulding and extrusion materials Part 1: Designation system and basis for specifications (Revision of ISO :2012) ISO/FDIS * Plastics Thermoplastic polyester (TP) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties (Revision of ISO :2012) TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries ISO/FDIS * Petroleum and natural gas industries Well integrity Part 1: Life cycle governance TC 68 Financial services ISO/FDIS * Financial services Secure cryptographic devices (retail) Part 2: Security compliance checklists for devices used in financial transactions (Revision of ISO :2016) TC 69 Applications of statistical methods ISO/FDIS * Control charts Part 8: Charting techniques for short runs and small mixed batches ISO/FDIS * Statistical methods in process management Capability and performance Part 2: Process capability and performance of time-dependent process models (Revision of ISO :2013) TC 83 Sports and other recreational facilities and equipment ISO/FDIS * Protective equipment for use in ice hockey Part 5: Neck laceration protectors for ice hockey players (Revision of ISO 10256:2003) TC 85 ISO/ASTM FDIS Nuclear energy, nuclear technologies, and radiological protection Practice for blood irradiation dosimetry (Revision of ISO/ASTM 51939:2013)

16 ISO/FDIS * Iodine charcoal sorbents for nuclear facilities Method for defining sorption capacity index TC 98 Bases for design of structures ISO/FDIS 3010 * Bases for design of structures Seismic actions on structures (Revision of ISO 3010:2001) TC 106 Dentistry ISO/FDIS 9873 * Dentistry Intra-oral mirrors (Revision of ISO 9873:1998, ISO 9873:1998/Cor 1:2000) TC 121 Anaesthetic and respiratory equipment ISO/FDIS * Biocompatibility evaluation of breathing gas pathways in healthcare applications Part 1: Evaluation and testing within a risk management process ISO/FDIS * Biocompatibility evaluation of breathing gas pathways in healthcare applications Part 2: Tests for emissions of particulate matter ISO/FDIS * Biocompatibility evaluation of breathing gas pathways in healthcare applications Part 3: Tests for emissions of volatile organic compounds (VOCs) ISO/FDIS * Biocompatibility evaluation of breathing gas pathways in healthcare applications Part 4: Tests for leachables in condensate ISO/FDIS * Medical electrical equipment Part 2-56: Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement (Revision of ISO :2009) TC 127 Earth-moving machinery ISO/FDIS * Earth-moving machinery Lifting and tying-down attachment points Performance requirements TC 131 ISO :2010/FDAmd 1 Fluid power systems * Connections for hydraulic fluid power and general use Hose fittings Part 1: Hose fittings with ISO O-ring face seal ends Amendment TC 134 Fertilizers and soil conditioners ISO/FDIS * Fertilizers and soil conditioners Solid urea aldehyde slow release fertilizer General requirements ISO/FDIS * Determination of urea content in urea-based fertilizers by high performance liquid chromatography (HPLC) TC 135 Non-destructive testing ISO/FDIS * Non-destructive testing Equipment for eddy current examination Array probe characteristics and verification

17 ISO/FDIS * Non-destructive testing Pulsed eddy current testing of ferromagnetic metallic components ISO/FDIS * Non-destructive testing Leak testing Vocabulary TC 138 Plastics pipes, fittings and valves for the transport of fluids ISO/FDIS * Plastics piping systems for drainage and sewerage without pressure Non-circular pipes and joints made of glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resins (UP) Dimensions, requirements and tests TC 147 Water quality ISO/FDIS * Water quality Enumeration of Legionella (Revision of ISO 11731:1998, ISO :2004) ISO/FDIS * Water quality Sampling Part 16: Guidance on biotesting of samples (Revision of ISO :1998) TC 156 Corrosion of metals and alloys ISO/FDIS * Cathodic protection Competence levels of cathodic protection persons Basis for a certification scheme TC 159 Ergonomics ISO/FDIS * Ergonomics of human-system interaction Part 112: Principles for the presentation of information TC 160 Glass in building ISO/FDIS * Glass in building Tempered soda lime silicate safety glass ISO/FDIS * Glass in building Basic soda lime silicate glass products Part 2: Float glass ISO/FDIS * Glass in building Basic soda lime silicate glass products Part 3: Polished wired glass ISO/FDIS * Glass in building Heat soaked tempered soda lime silicate safety glass TC 163 Thermal performance and energy use in the built environment ISO/FDIS * Thermal performance of windows and doors Determination of solar heat gain coefficient using solar simulator TC 165 Timber structures ISO/FDIS * Timber structures Finger-jointed timber Manufacturing and production requirements TC 172 Optics and photonics

18 ISO/FDIS * Optics and optical instruments Laboratory procedures for testing surveying and construction instruments Part 1: Performance of handheld laser distance meters (Revision of ISO :2012) ISO/FDIS * Ophthalmic instruments Slit-lamp microscopes (Revision of ISO 10939:2007) TC 182 Geotechnics ISO/FDIS * Geotechnical investigation and testing Laboratory testing of soil Part 5: Incremental loading oedometer test (Revision of ISO/TS :2004, ISO/TS :2004/Cor 1:2006) ISO/FDIS * Geotechnical investigation and testing Laboratory testing of soil Part 6: Fall cone test (Revision of ISO/TS :2004, ISO/TS :2004/Cor 1:2006) TC 190 Soil quality ISO/FDIS * Soil quality Determination of dry bulk density (Revision of ISO 11272:1998) ISO/FDIS * Soil quality Procedure for site-specific ecological risk assessment of soil contamination (soil quality TRIAD approach) TC 194 Biological and clinical evaluation of medical devices ISO/FDIS * Biological evaluation of medical devices Part 4: Selection of tests for interactions with blood (Revision of ISO :2002, ISO :2002/Amd 1:2006) TC 201 Surface chemical analysis ISO/FDIS * Surface chemical analysis X-ray photoelectron spectroscopy Description of selected instrumental performance parameters (Revision of ISO 15470:2004) TC 206 Fine ceramics ISO/FDIS * Fine ceramics (advanced ceramics, advanced technical ceramics) Measurement method for normal spectral emissivity using blackbody reference with an FTIR spectrometer TC 217 Cosmetics ISO/FDIS * Cosmetics Microbiology Guidelines for the risk assessment and identification of microbiologically low-risk products (Revision of ISO 29621:2010) TC 224 Service activities relating to drinking water supply systems and wastewater systems - Quality criteria of the service and performance indicators ISO/FDIS * Service activities relating to drinking water supply systems and wastewater systems Guidelines for benchmarking of water utilities

19 TC 249 Traditional chinese medicine ISO/FDIS * Traditional Chinese medicine Coding system for Chinese medicines Part 2: Codes for decoction pieces ISO/FDIS * Traditional Chinese medicine Coding system for Chinese medicines Part 3: Codes for Chinese Materia Medica ISO/FDIS * Traditional Chinese medicine Coding system for Chinese medicines Part 4: Codes for granule forms of individual medicinals for prescriptions ISO/FDIS * Traditional Chinese medicine General requirements for industrial manufacturing process of red ginseng (Panax ginseng C.A. Meyer) ISO/FDIS * Traditional Chinese medicine Salvia miltiorrhiza seeds and seedlings IULTCS International Union of Leather Technologists and Chemists Societies ISO/FDIS * Leather Determination of degradability by micro-organisms ISO/FDIS * Leather Chemical tests Guidelines for testing critical chemicals in leather JTC 1 ISO/IEC/IEEE Q:2016/FDAmd 1 ISO/IEC/IEEE Q:2016/FDAmd 3 ISO/IEC/IEEE FDIS AB Information technology * Information technology Telecommunications and information exchange between systems Local and metropolitan area networks Specific requirements Part 1Q: Bridges and bridged networks Amendment 1: Path Control and Reservation Information technology Telecommunications and information exchange between systems Local and metropolitan area networks Specific requirements Part 1Q: Bridges and bridged networks Amendment 3: Enhancements for Scheduled Traffic * Information technology Telecommunications and information exchange between systems Local and metropolitan area networks Specific requirements Part 1AB: Station and media access control connectivity discovery (Revision of ISO/IEC/IEEE AB:2014) ISO/IEC FDIS * Information technology Multimedia application formats (MPEG-A) Part 18: Media linking application format