Rolling bearings Load ratings for hybrid bearings with rolling elements made of ceramic Part 2: Static load ratings

Transcription

1 International Standards in process An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same. CD registered Period from 01 July to 31 July 2016 These documents are currently under consideration in the technical committee. They have been registred at the Central Secretariat. TC 4 ISO/CD TC 5 ISO/CD TC 20 ISO/CD TC 21 ISO/CD ISO/CD ISO/CD TC 22 ISO/CD ISO/DTS Rolling bearings Rolling bearings Load ratings for hybrid bearings with rolling elements made of ceramic Part 2: Static load ratings Ferrous metal pipes and metallic fittings Metallic flanges Part 2: Cast iron flanges Aircraft and space vehicles Space systems Requirements for small spacecraft Equipment for fire protection and fire fighting Fire protection Automatic sprinkler systems Part 16: Requirements and test methods for fire pump relief valves Fire protection Automatic sprinkler systems Part 17: Requirements and test methods for pressure control valves Fire protection Automatic sprinkler systems Part 18: Requirements and test methods for flexible sprinkler hose Road vehicles Road vehicles Vehicle dynamics test methods Part 1: General conditions for passenger cars Road vehicles Design and performance specifications for the WorldSID 50th percentile male side impact dummy Part 5: Dummy design updates

2 TC 34 ISO/CD TC 35 ISO/CD TC 38 ISO/CD ISO/CD ISO/CD TC 42 ISO/DTR TC 61 ISO/CD TC 68 ISO/CD TR TC 70 ISO/CD TC 81 ISO/CD 257 TC 85 ISO/CD TC 92 ISO/DTR TC 120 ISO/CD TC 131 ISO/CD 6099 TC 134 ISO/CD TC 138 ISO/CD ISO/DTS TC 150 Food products Sustainable and traceable cocoa beans Part 4: Requirements for certification schemes Paints and varnishes Paints and varnishes Determination of image clarity (degree of sharpness of reflected or transmitted image) Textiles Textiles-Determination of surface water absorption of microfiber fabrics Textiles Test method for determining moisturizing effect of textiles on human skin in vitro test Silk Test method for size of silk Photography Graphic technology and photography Colour characterization of digital still cameras (DSCs) Part 3: User controls and readouts for scene-referred imaging applications Plastics Plastics moulded parts Tolerances and acceptance conditions Financial services Securities and related financial instruments Landscape of identification of financial instruments Internal combustion engines Reciprocating internal combustion engines Vocabulary Part 1: Terms for engine design and operation Common names for pesticides and other agrochemicals Pesticides and other agrochemicals Principles for the selection of common names Nuclear energy, nuclear technologies, and radiological protection Measurement of radioactivity - Gamma emitting radionuclides - Generic test method using gamma spectrometry Fire safety Fire safety engineering Performance of structures in fire Part 4: Example of a multi-storey building in Japan Leather Leather Guidelines for packaging of wet blue leather Fluid power systems Fluid power systems and components Cylinders Identification code for mounting dimensions and mounting types Fertilizers and soil conditioners Determination of microamount of inorganic anions in fertilizers by ion chromatography Plastics pipes, fittings and valves for the transport of fluids Glass-reinforced thermosetting plastics (GRP) pipes Determination of the long-term ultimate bending strain and the long-term ultimate relative ring deflection under wet conditions Glass reinforced thermosetting plastic (GRP) pipes Determination of initial specific ring stiffness using segment test species cut from a pipe Implants for surgery

3 ISO/DTS TC 159 ISO/CD TC 161 ISO :2016/CD Amd 1 TC 164 ISO/CD 204 TC 171 ISO/DTR TC 172 ISO/CD TC 173 ISO/CD TC 176 ISO/CD TC 184 Assessment of the safety of magnetic resonance imaging for patients with an active implantable medical device Ergonomics Ergonomics of the thermal environment Assessment of the influence of the thermal environment using subjective judgement scales Control and protective devices for gas and/or oil burners and appliances Safety and control devices for gas burners and gas-burning appliances Particular requirements Part 8: Multifunctional controls Amendment 1: Overheating safety devices Mechanical testing of metals Metallic materials Uniaxial creep testing in tension Method of test Document management applications Document management Information stored electronically Recommendations for trustworthiness and reliability Optics and photonics Optics and optical instruments Field procedures for testing geodetic and surveying instruments Part 5: Total stations Assistive products for persons with disability Walking trolleys - Requirements and test methods Quality management and quality assurance Quality management systems Guidelines for quality management in projects Automation systems and integration ISO/CD Industrial automation systems and integration Standardized procedures for production systems engineering Part 4: Key performance indicators (KPIs) in production planning processes TC 204 ISO/CD TC 210 ISO/CD TC 215 ISO/CD ISO/CD ISO/CD ISO/DTR ISO/DTS ISO/DTS TC 229 ISO/DTS ISO/DTS TC 249 Intelligent transport systems Intelligent transport systems Definition of data elements and data frames between roadside units and signal controllers for cooperative signal control Quality management and corresponding general aspects for medical devices Connectors for reservoir delivery systems for healthcare applications Part 7: Conectors for Intravascular Infusion Health informatics Health informatics Electronic health record communication Part 3: Reference archetypes and term lists Health informatics Electronic health record communication Part 4: Security Health informatics Electronic health record communication Part 5: Interface specification Health Informatics Re-usable Component Strategy for Use Case Development Metadata for describing structured clinical genomic sequence information in electronic health records Health informatics Trusted end-to-end information flows Nanotechnologies Nanotechnologies Electron spin resonance (ESR) as a method for measuring reactive oxygen species (ROS) generated by metal oxide nanomaterials Nanotechnologies Vocabulary Part 13: Graphene and other two dimensional materials Traditional chinese medicine

4 ISO/CD TC 267 ISO/CD TC 282 ISO/CD JTC 1 ISO/IEC PDTR ISO/IEC PDTR ISO/IEC CD ISO/CD ISO/IEC CD Traditional Chinese medicine Infection control for acupuncture treatment Facility management Facility management Management systems Requirements with guidance for use Water reuse Guidelines for water quality grade symbols for water re-use Information technology Systems and software engineering Lifecycle profiles for Very Small Entities (VSEs) Part 3-1: Assessment guide Information technology Programming languages, their environments and system software interfaces Guidelines for the preparation of Language-Independent Service Specifications (LISS) Information technology Programming languages C++ Information technology Small Computer System Interface (SCSI) Part 263: SAS Protocol Layer - 3 (SPL-3) Information technology Small computer system interface (SCSI) Part 454: SCSI Primary Commands - 4 (SPC- 4) ISO/IEC CD Information technology Cloud computing Service level agreement (SLA) framework and technology Part 4: Security and privacy ISO/IEC :2014/PDAM 1 ISO/IEC :2010/PDAM 1 ISO/IEC CD ISO/IEC :2015/PDAM 3 ISO/IEC /PDAM 1 ISO/IEC CD ISO/IEC CD ISO/IEC PDTR ISO/IEC :2015/PDAM 1 ISO/IEC :2015/PDAM 2 ISO/IEC PDTR ISO/IEC PDTR Information technology Coding of audio-visual objects Part 30: Timed text and other visual overlays in ISO base media file format Amendment 1: Support for CTA-708 captioning in SEI messages Information technology Multimedia framework (MPEG-21) Part 19: Media Value Chain Ontology Amendment 1: Extensions on time-segments and multi-track audio Information technology Multimedia application format (MPEG-A) Part 19: Common media application format Information technology MPEG audio technologies Part 4: Dynamic Range Control Amendment 3: DRC Conformance Information technology High efficiency coding and media delivery in heterogeneous environments Part 2: High efficiency video coding Amendment 1: Additional colour representation code point Information technology High efficiency coding and media delivery in heterogeneous environments Part 6: 3D Audio reference software Information technology High efficiency coding and media delivery in heterogeneous environments Part 9: 3D Audio conformance testing Information technology Advanced image coding and evaluation Part 1: Guidelines for codec evaluation Information technology Advanced image coding and evaluation Part 2: Evaluation procedure for nearly lossless coding Amendment 1: Parameters for nearly lossless coding of high dynamic range media Information technology Advanced image coding and evaluation Part 2: Evaluation procedure for nearly lossless coding Amendment 2: Evaluation procedure for nearly lossless coding of image sequences Information technology Database languages SQL Technical Reports Part 7: SQL Support for polymorphic table functions Information technology Learning, Education and Training Learning analytics interoperability Part 2: System requirements ISO/IEC CD Information technology Cloud computing Service level agreement (SLA) framework and technology Part 2: Metrics ISO/IEC PDTR Information technology Data centres Guidelines for resource efficient data centres

5 DIS circulated Period from 01 July to 31 July 2016 These documents have obtained substantial support within the appropriate ISO technical committee. They have been submitted to the ISO member bodies for voting by the date shown. * Available in English only Vote terminates TC 4 Rolling bearings ISO/DIS * Rolling bearings Measuring methods for vibration Part 3: Radial spherical and tapered roller bearings with cylindrical bore and outside surface (Revision of ISO :2006, ISO :2006/Cor 1:2010) ISO/DIS * Rolling bearings Measuring methods for vibration Part 4: Radial cylindrical roller bearings with cylindrical bore and outside surface (Revision of ISO :2007) TC 8 Ships and marine technology ISO/DIS * Ships and marine technology Marine cranes Design methods for drums TC 10 Technical product documentation ISO/DIS * Technical product documentation Design for manufacturing, assembling, disassembling and end-of-life processing Part 1: General concepts and requirements TC 12 Quantities and units ISO/DIS * Quantities and units Part 2: Mathematics (Revision of ISO :2009) ISO/DIS * Quantities and units Part 10: Atomic and nuclear physics (Revision of ISO :2009) TC 20 Aircraft and space vehicles ISO/DIS * Aerospace Fluid systems Vocabulary Part 2: General terms and definitions relating to flow

6 (Revision of ISO :1991) ISO/DIS * Aerospace Fluid systems Vocabulary Part 3: General terms and definitions relating to temperature (Revision of ISO :1991) ISO/DIS * Aerospace series Titanium tube for 35MPa operating pressure Part 1: Inch series ISO/DIS * Space environment (natural and artificial) Plasma environments for generation of worst case electrical potential differences for spacecraft TC 21 Equipment for fire protection and fire fighting ISO/DIS * Fire protection Automatic sprinkler systems Part 4: Requirements and test methods for quick-opening devices (Revision of ISO :1993) ISO/DIS * Fire protection Automatic sprinkler systems Part 6: Requirements and test methods for check valves (Revision of ISO :2006) ISO/DIS * Fire protection Automatic sprinkler systems Part 11: Requirements and test methods for pipe hangers (Revision of ISO :2003) ISO/DIS * Fire protection Automatic sprinkler systems Part 12: Requirements and test methods for grooved-end components for steel pipe systems (Revision of ISO :2014) TC 22 ISO/DIS Road vehicles Road vehicles Open diagnostic data exchange (ODX) Part 3: Fault symptom exchange description (FXD) ISO/DIS * Passenger cars Test track for a severe lane-change manoeuvre Part 1: Double lane-change (Revision of ISO :1999) ISO/DIS 7975 * Passenger cars Braking in a turn Open-loop test method (Revision of ISO 7975:2006) ISO/DIS 9816 * Passenger cars Power-off reaction of a vehicle in a turn Open-loop test method (Revision of ISO 9816:2006) TC 23 Tractors and machinery for agriculture and forestry ISO/DIS * Radiofrequency identification of animals Advanced transponders Part 3: Applications TC 24 Particle characterization including sieving

7 ISO/DIS * Measurement and characterization of particles by acoustic methods Part 3: Guidelines for non-linear theory TC 31 Tyres, rims and valves ISO/DIS * Passenger car tyres Spare unit substitutive equipment (SUSE) (Revision of ISO 16992:2010) TC 34 Food products ISO/DIS * Coffee Sensorial analysis Vocabulary TC 35 Paints and varnishes ISO/DIS * Paints and varnishes Coating materials and coating systems for exterior wood Natural weathering test (Revision of ISO 16053:2010) TC 37 Terminology and other language and content resources ISO/DIS * XLIFF (XML Localisation interchange file format) TC 38 Textiles ISO/DIS 811 * Textile Determination of resistance to water penetration Hydrostatic pressure test (Revision of ISO 811:1981) ISO/DIS * Textiles Measurement of water vapour permeability of textiles for the purpose of quality control (Revision of ISO 15496:2004, ISO 15496:2004/Cor 1:2006) TC 39 Machine tools ISO/DIS * Machine tools Environmental evaluation of machine tools Part 4: Principles for measuring metal-forming machine tools and laser processing machine tools with respect to energy efficiency TC 44 Welding and allied processes ISO/DIS * Non-destructive testing of welds Phased Array technique (PA) Acceptance criteria ISO/DIS * Soft soldering fluxes Test methods Part 11: Solubility of flux residues (Revision of ISO :1991) ISO/DIS * Soft soldering fluxes Test methods Part 14: Assessment of tackiness of flux residues (Revision of ISO :1991) ISO/DIS * Soft soldering fluxes Test methods Part 15: Copper corrosion test

8 (Revision of ISO :1996) TC 45 Rubber and rubber products ISO/DIS * Rubber compounding ingredients Carbon black Determination of aggregate size distribution by disc centrifuge photosedimentometry (Revision of ISO 15825:2015) ISO/DIS * Rubber, raw Determination of the glass transition temperature by differential scanning calorimetry (DSC) (Revision of ISO 22768:2006) TC 61 Plastics ISO/DIS * Plastics Acquisition and presentation of comparable single-point data Part 1: Moulding materials (Revision of ISO :2007, ISO :2007/Amd 1:2014) TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries ISO/DIS * Petroleum and natural gas industries Pipeline transportation systems (Revision of ISO 13623:2009) TC 70 Internal combustion engines ISO/DIS * Reciprocating internal combustion engine driven alternating current generating sets Part 7: Technical declarations for specification and design (Revision of ISO :1994) ISO/DIS * Reciprocating internal combustion engine driven alternating current generating sets Part 9: Measurement and evaluation of mechanical vibrations (Revision of ISO :1995) ISO/DIS * Reciprocating internal combustion engines Exhaust emission measurement Part 4: Steady-state and transient test cycles for different engine applications (Revision of ISO :2007) TC 79 Light metals and their alloys ISO/DIS * Magnesium and magnesium alloys Magnesium alloy ingots and castings (Revision of ISO 16220:2005, ISO 16220:2005/Amd 1:2007) TC 83 Sports and other recreational facilities and equipment ISO/DIS * Stationary training equipment Part 8: Steppers, stairclimbers and climbers Additional specific safety requirements and test methods (Revision of ISO :2005) ISO/DIS * Stationary training equipment Part 10: Exercise bicycles with a fixed wheel or without freewheel, additional specific safety requirements and test methods

9 (Revision of ISO :2007) TC 85 ISO/ASTM DIS Nuclear energy, nuclear technologies, and radiological protection * Practice for use of a ceric-cerous sulfate dosimetry system (Revision of ISO/ASTM 51205:2009) ISO/DIS * Measurement of radioactivity Determination of beta emitters activities Test method using liquid scintillation counting TC 92 Fire safety ISO/DIS * Generation and analysis of toxic gases in fire Calculation of species yields, equivalence ratios and combustion efficiency in experimental fires (Revision of ISO 19703:2010) TC 94 Personal safety -- Protective clothing and equipment ISO/DIS * Protective clothing against heat and flame Part 1: Test method for complete garments Measurement of transferred energy using an instrumented manikin ISO/DIS * Protective clothing against heat and flame Part 2: Skin burn injury prediction Calculation requirements and test cases TC 107 Metallic and other inorganic coatings ISO/DIS * Vitreous and Porcelain enamels Preparation of samples and determination of thermal expansion coefficient TC 108 Mechanical vibration, shock and condition monitoring ISO/DIS * Condition monitoring and diagnostics of machines Vibration condition monitoring Part 7: Diagnostic techniques for machine sets in hydraulic power generating and pump-storage plants TC 112 Vacuum technology ISO/DIS * Vacuum Technology Vacuum gauges Specifications, calibration and measurement uncertainties for Pirani gauges TC 113 ISO 4359:2013/DAmd 1 Hydrometry * Flow measurement structures Rectangular, trapezoidal and U-shaped flumes Amendment TC 121 IEC/DIS Anaesthetic and respiratory equipment * Medical electrical equipment Part 2-49: Particular requirements for the basic safety and essential performance of multifunction patient monitoring equipment TC 123 Plain bearings ISO/DIS * Plain bearings Pressed bimetallic half thrust washers Features and tolerances (Revision of ISO 6526:1983)

10 TC 131 Fluid power systems ISO/DIS * Pneumatic fluid power Compressed-air filters Part 1: Main characteristics to be included in suppliers' literature and product marking requirements (Revision of ISO :1997) ISO/DIS * Pneumatic fluid power systems Directional control valves Specification of pin assignment for electrical round connectors of diameters 8 mm and 12 mm (Revision of ISO 20401:2005, ISO 20401:2005/Cor 1:2005) ISO/DIS * Hydraulic fluid power Method for evaluating water separation performance of dehydrators TC 135 Non-destructive testing ISO/DIS * Non-destructive testing Characterization and verification of ultrasonic phased array equipment Part 2: Probes TC 138 Plastics pipes, fittings and valves for the transport of fluids ISO/DIS * Plastics piping systems for pressure and non-pressure drainage and sewerage Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin (Revision of ISO 10467:2004, ISO 10467:2004/Amd 1:2012) ISO/DIS * Classification and information on design and applications of plastics piping systems used for renovation and replacement (Revision of ISO 11295:2010) ISO/DIS * Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks Part 2: Lining with continuous pipes ISO/DIS * Plastics piping systems for renovation of underground drainage and sewerage networks under pressure Part 2: Lining with continuous pipes ISO/DIS * Plastics piping systems for renovation of underground water supply networks Part 2: Lining with continuous pipes TC 150 ISO :2014/DAmd 1 Implants for surgery * Implants for surgery Wear of total hip-joint prostheses Part 1: Loading and displacement parameters for wear-testing machines and corresponding environmental conditions for test Amendment ISO/DIS * Implants for surgery Orthopaedic joint prosthesis Part 1: Procedure for producing parametric 3D bone models from CT data of the knee TC 160 Glass in building ISO/DIS * Glass in building Electrochromic glazings Accelerated ageing test and requirements TC 164 Mechanical testing of metals ISO/DIS * Metallic materials Vickers hardness test Part 1: Test method

11 (Revision of ISO :2005) ISO/DIS * Metallic materials Vickers hardness test Part 2: Verification and calibration of testing machines (Revision of ISO :2005) ISO/DIS * Metallic materials Vickers hardness test Part 3: Calibration of reference blocks (Revision of ISO :2005) ISO/DIS * Metallic materials Vickers hardness test Part 4: Tables of hardness values (Revision of ISO :2005) TC 171 Document management applications ISO/DIS Document management Portable document format Part 2: PDF TC 172 Optics and photonics ISO/DIS * Optics and photonics Environmental requirements Test requirements for telescopic systems (Revision of ISO :2001) TC 182 Geotechnics ISO/DIS * Geotechnical investigation and testing Field testing Part 10: Weight sounding test (Revision of ISO/TS :2005) TC 184 Automation systems and integration ISO/DIS * Industrial automation systems and integration JT file format specification for 3D visualization (Revision of ISO 14306:2012) TC 195 Building construction machinery and equipment ISO/DIS * Building construction machinery and equipment Mobile mixers Part 1: Terminology and commercial specifications TC 202 Microbeam analysis ISO/DIS * Microbeam analysis Analytical electron microscopy Guidelines for apparent growth direction determination of wirelike crystals by transmission electron microscopy TC 204 ISO/DIS Intelligent transport systems Intelligent transport systems Graphic data dictionary (Revision of ISO/TS 14823:2008) TC 210 Quality management and corresponding general aspects for medical devices

12 ISO/DIS * Medical devices Recognized essential principles of safety and performance of medical devices Part 2: General essential principles and additional specific essential principles for all IVD medical devices and guidance on the selection of standards TC 213 Dimensional and geometrical product specifications and verification ISO/DIS * Geometrical product specifications (GPS) Geometrical tolerancing Positional and pattern tolerancing (Revision of ISO 5458:1998) TC 215 Health informatics ISO/DIS * Health informatics Public key infrastructure Part 5: Authentication using Healthcare PKI credentials TC 219 Floor coverings ISO/DIS 6347 * Textile floor coverings Consumer information (Revision of ISO 6347:2004) ISO/DIS * Resilient floor coverings Heterogeneous poly(vinyl chloride) floor covering Specifications (Revision of ISO 10582:2010) TC 228 Tourism and related services ISO/DIS * Tourism and related services Yacht harbours Part 1: Minimum requirements basic service level harbours (Revision of ISO 13687:2014) TC 229 Nanotechnologies ISO/DIS * Nanotechnologies In vitro MTS assay for measuring the cytotoxic effect of nanoparticles TC 249 Traditional chinese medicine ISO/DIS * Traditional Chinese medicine Pulse graph force transducer ISO/DIS * Traditional Chinese medicine Gua Sha instruments ISO/DIS * Traditional Chinese medicine Computerised tongue image analysis system Part 2: Light environment TC 265 Carbon dioxide capture, transportation, and geological storage ISO/DIS * Carbon Dioxide Capture, Transportation and Geological Storage Geological Storage CASCO Committee on conformity assessment * Conformity assessment Requirements for bodies providing audit and certification of management systems Part 3: Competence requirements for auditing and certification of quality management systems

13 (Revision of ISO/IEC TS :2013) JTC Information technology * Identification cards Integrated circuit cards Part 11: Personal verification through biometric methods (Revision of ISO/IEC :2004) * Information technology Generic cabling for customer premises Part 1: General requirements (Revision of ISO/IEC 11801:2002, ISO/IEC 11801:2002/Cor 2:2002, ISO/IEC 11801:2002/Cor 1:2002, ISO/IEC 11801:2002/Amd 1:2008, ISO/IEC 11801:2002/Cor 3:2008, ISO/IEC 11801:2002/Amd 2:2010) * Information technology Generic cabling for customer premises Part 2: Office premises (Revision of ISO/IEC 11801:2002, ISO/IEC 11801:2002/Cor 2:2002, ISO/IEC 11801:2002/Cor 1:2002, ISO/IEC 11801:2002/Amd 1:2008, ISO/IEC 11801:2002/Cor 3:2008, ISO/IEC 11801:2002/Amd 2:2010) * Information technology Generic cabling for customer premises Part 3: Industrial premises (Revision of ISO/IEC 24702:2006, ISO/IEC 24702:2006/Amd 1:2009) * Information technology Generic cabling for customer premises Part 4: Homes (Revision of ISO/IEC 15018:2004, ISO/IEC 15018:2004/Amd 1:2009) * Information technology Generic cabling for customer premises Part 5: Data centres (Revision of ISO/IEC 24764:2010, ISO/IEC 24764:2010/Amd 1:2014) * Information technology Generic cabling for customer premises Part 6: Distributed Building Services * Information technology Security techniques Key management Part 4: Mechanisms based on weak secrets (Revision of ISO/IEC :2006, ISO/IEC :2006/Cor 1:2009) * Information technology Security techniques Cryptographic techniques based on elliptic curves Part 5: Elliptic curve generation (Revision of ISO/IEC :2009, ISO/IEC :2009/Cor 1:2012) * Information technology Security techniques Secret Sharing Part 2: Fundamental mechanisms Information technology Security techniques Information security management system Guidance (Revision of ISO/IEC 27003:2010) * Information technology Security techniques Application security Part 5: Protocols and application security controls data structure

14 * Information technology Security techniques Application security Part 7: Application security assurance prediction model * Information technology Security techniques Electronic discovery Part 3: Code of Practice for electronic discovery * Information technology Security techniques Privacy impact assessment Guidelines * Information technology Security techniques Code of practice for personally identifiable information protection ISO/IEC :2004/DAmd 46 * Information technology Coding of audio-visual objects Part 4: Conformance testing Amendment 46: Conformance testing for internet video coding ISO/IEC :2001/DAmd 41 * Information technology Coding of audio-visual objects Part 5: Reference software Amendment 41: Reference software for internet video coding ISO/IEC :2001/DAmd 42 * Information technology Coding of audio-visual objects Part 5: Reference software Amendment 42: Reference software for the alternative depth information SEI message extension of AVC ISO/IEC :2014/DAmd 3 * Information technology MPEG video technologies Part 4: Video tool library Amendment 3: FU and FN descriptions for parser instantiation from BSD ISO/IEC :2013/DAmd 3 ISO/IEC :2014/DAmd 4 * Information technology MPEG video technologies Part 5: Reconfigurable media coding conformance and reference software Amendment 3: Reference software for parser instantiation from BSD * Information technology Dynamic adaptive streaming over HTTP (DASH) Part 1: Media presentation description and segment formats Amendment 4: Segment Independent SAP Signalling (SISSI), MPD chaining, MPD reset and other extensions * Information technology Cloud computing Service level agreement (SLA) framework Part 3: Core conformance requirements * Information technology Governance of IT Part 1: The application of ISO/IEC to the governance of data FDIS circulated Period from 01 July to 31 July 2016 These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date shown * Available in English only

15 Vote terminates TC 8 Ships and marine technology ISO/FDIS * Ships and marine technology Marine evacuation systems Determination of capacity TC 10 Technical product documentation ISO/FDIS * Drawing and writing instruments Ball point pens and roller ball pens Vocabulary (Revision of ISO 12756:1998, ISO 12756:1998/Amd 1:2011) TC 17 Steel ISO/FDIS * Steel Determination of the thickness of surface-hardened layers (Revision of ISO 3754:1976, ISO 4970:1979, ISO 2639:2002) TC 22 Road vehicles ISO/FDIS * Heavy commercial vehicles and buses Emergency braking on a defined path Test method for trajectory measurement TC 29 Small tools ISO/FDIS 235 * Parallel shank jobber and stub series drills and Morse taper shank drills (Revision of ISO 235:1980, ISO 235:1980/Cor 1:1996) ISO/FDIS 238 * Reduction sleeves and extension sockets for tools with Morse taper shanks (Revision of ISO 238:1974) ISO/FDIS 2540 * Centre drills for centre holes with protecting chamfer Type B (Revision of ISO 2540:1973) ISO/FDIS 2541 * Centre drills for centre holes with radius form Type R (Revision of ISO 2541:1972) ISO/FDIS 2584 * Cylindrical cutters with plain bore and key drive Metric series (Revision of ISO 2584:1972) ISO/FDIS 3291 * Extra-long Morse taper shank twist drills (Revision of ISO 3291:1995) ISO/FDIS 3292 * Extra-long parallel shank twist drills

16 (Revision of ISO 3292:1995) ISO/FDIS 4202 * Reduction sleeves with external 7/24 taper for tools with Morse taper shanks (Revision of ISO 4202:1978) ISO/FDIS 4205 * Countersinks, 90, with parallel shanks and solid pilots (Revision of ISO 4205:1991) ISO/FDIS 4206 * Counterbores with parallel shanks and solid pilots (Revision of ISO 4206:1991) ISO/FDIS 4207 * Counterbores with Morse taper shanks and detachable pilots (Revision of ISO 4207:1977) ISO/FDIS 7079 * Core drills with parallel shanks and with Morse taper shanks (Revision of ISO 7079:1981) ISO/FDIS * Woodruff keaseat cutters Dimensions (Revision of ISO 12197:1996) TC 35 Paints and varnishes ISO/FDIS * Preparation of steel substrates before application of paints and related products Tests for the assessment of surface cleanliness Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method) (Revision of ISO :1992) TC 39 Machine tools ISO/FDIS * Woodworking machines Safety requirements Part 3: Numerically controlled (NC) boring and routing machines TC 44 Welding and allied processes ISO/FDIS * Non-destructive testing of welds Visual testing of fusion-welded joints (Revision of ISO 17637:2003) ISO/FDIS * Non-destructive testing of welds Magnetic particle testing (Revision of ISO 17638:2003) TC 45 Rubber and rubber products ISO/FDIS 1401 * Rubber hoses for agricultural spraying (Revision of ISO 1401:1999)

17 ISO/FDIS 2398 * Rubber hoses, textile-reinforced, for compressed air Specification (Revision of ISO 2398:2006) ISO/FDIS 4081 * Rubber hoses and tubing for cooling systems for internal-combustion engines Specification (Revision of ISO 4081:2010) ISO/FDIS 6804 * Rubber and plastics inlet hoses and hose assemblies for washing-machines and dishwashers Specification (Revision of ISO 6804:2009) ISO/FDIS 7326 * Rubber and plastics hoses Assessment of ozone resistance under static conditions (Revision of ISO 7326:2006) ISO/FDIS 7751 * Rubber and plastics hoses and hose assemblies Ratios of proof and burst pressure to maximum working pressure (Revision of ISO 7751:1991, ISO 7751:1991/Amd 1:2011) ISO/FDIS 8331 * Rubber and plastics hoses and hose assemblies Guidelines for selection, storage, use and maintenance (Revision of ISO 8331:2014) ISO/FDIS 247 * Rubber Determination of ash (Revision of ISO 247:2006) ISO/FDIS 1304 * Rubber compounding ingredients Carbon black Determination of iodine adsorption number (Revision of ISO 1304:2006) ISO/FDIS 1434 * Natural rubber in bales Amount of bale coating Determination (Revision of ISO 1434:1995) ISO/FDIS * Rubber- or plastics-coated fabrics Determination of tear resistance Part 1: Constant rate of tear methods (Revision of ISO :2003) TC 54 Essential oils ISO/FDIS 3848 * Essential oil of citronella, Java type (Revision of ISO 3848:2001, ISO 3848:2001/Cor 1:2002) TC 59 Buildings and civil engineering works ISO/FDIS * Data structures for electronic product catalogues for building services Part 2: Geometry

18 TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries ISO/FDIS * Petroleum and natural gas industries Offshore production installations Major Accident hazard management during the design of new installations (Revision of ISO 17776:2000) TC 71 Concrete, reinforced concrete and pre-stressed concrete ISO/FDIS * Testing of concrete Part 2: Properties of fresh concrete (Revision of ISO :2005) ISO/FDIS * Test methods for fibre-reinforced cementitious composites Load-displacement curve using notched specimen TC 92 Fire safety ISO/FDIS * Guidance for assessing the validity of physical fire models for obtaining fire effluent toxicity data for fire hazard and risk assessment Part 1: Criteria (Revision of ISO :2010) TC 107 Metallic and other inorganic coatings ISO/FDIS * Metallic coatings Electroplated coatings of zinc and zinc alloys on iron or steel with supplementary Cr(VI)-free treatment TC 108 Mechanical vibration, shock and condition monitoring ISO/FDIS * Mechanical vibration Laboratory method for evaluating vehicle seat vibration Part 1: Basic requirements (Revision of ISO :1992, ISO :1992/Amd 1:2007, ISO :1992/Amd 2:2011) TC 147 Water quality ISO/FDIS * Water quality Marine algal growth inhibition test with Skeletonema sp. and Phaeodactylum tricornutum (Revision of ISO 10253:2006) TC 150 ISO 21535:2007/FDAm d 1 TC 156 Implants for surgery * Non-active surgical implants Joint replacement implants Specific requirements for hip-joint replacement implants Amendment Corrosion of metals and alloys ISO/FDIS * Cathodic protection of steel in concrete (Revision of ISO 12696:2012) TC 163 Thermal performance and energy use in the built environment ISO/FDIS * Thermal insulation products Sheep wool mat and board Specification

19 TC 164 Mechanical testing of metals ISO/FDIS * Metallic materials Instrumented indentation test for hardness and materials parameters Part 4: Test method for metallic and non-metallic coatings (Revision of ISO :2007) TC 172 IEC :2014/FDAmd 1 TC 202 Optics and photonics Medical electrical equipment Part 2-58: Particular requirements for basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery Amendment 1: Proposed Horizontal Standard Microbeam analysis ISO/FDIS * Microbeam analysis Electron probe microanalysis Quantitative point analysis for bulk specimens using wavelength dispersive X-ray spectroscopy (Revision of ISO 22489:2006) TC 206 Fine ceramics ISO/FDIS * Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for air-purification performance of semiconducting photocatalytic materials Part 1: Removal of nitric oxide (Revision of ISO :2007) TC 210 Quality management and corresponding general aspects for medical devices ISO/FDIS * Medical devices Symbols to be used with medical device labels, labelling and information to be supplied Part 1: General requirements (Revision of ISO :2012) TC 212 Clinical laboratory testing and in vitro diagnostic test systems ISO/FDIS * Point-of-care testing (POCT) Requirements for quality and competence (Revision of ISO 22870:2006) TC 213 Dimensional and geometrical product specifications and verification ISO/FDIS * Geometrical product specifications (GPS) Dimensional tolerancing Part 3: Angular sizes ISO/FDIS * Geometrical product specifications (GPS) Filtration Part 31: Robust profile filters: Gaussian regression filters (Revision of ISO/TS :2010) TC 218 ISO/FDIS Timber * Physical and mechanical properties of wood Test methods for small clear wood specimens Part 13: Determination of radial and tangential shrinkage (Revision of ISO 4469:1981) ISO/FDIS * Physical and mechanical properties of wood Test methods for small clear wood specimens Part 14: Determination of volumetric shrinkage (Revision of ISO 4858:1982)

20 TC 219 Floor coverings ISO/FDIS * Textile floor coverings Blade test Flocked textile floor covering TC 265 Carbon dioxide capture, transportation, and geological storage ISO/FDIS * Carbon dioxide capture, transportation and geological storage Pipeline transportation systems CASCO Committee on conformity assessment ISO/FDIS * General requirements for the competence of reference material producers (Revision of ISO Guide 34:2009) JTC 1 ISO/IEC/IEEE FDIS Information technology * Information technology Telecommunications and information exchange between systems Ubiquitous green community control network: Heterogeneous networks convergence and scalability ISO/IEC FDIS * Identification cards Integrated circuit cards Part 8: Commands and mechanisms for security operations (Revision of ISO/IEC :2004) ISO/IEC FDIS * Information technology Identification cards Biometric System-on-Card Part 3: Logical information interchange mechanism ISO/IEC FDIS * Identification cards ICC-managed devices Part 3: Organization, security and commands for interchange ISO/IEC FDIS * Information technology Automated infrastructure management (AIM) systems Requirements, data exchange and applications ISO/IEC FDIS * Information technology Security techniques Secret Sharing Part 1: General ISO/IEC FDIS * Information technology Security techniques Information security incident management Part 2: Guidelines to plan and prepare for incident response (Revision of ISO/IEC 27035:2011) ISO/IEC :2010/FDAmd 4 * Information technology MPEG audio technologies Part 2: Spatial Audio Object Coding (SAOC) Amendment 4: SAOC Conformance ISO/IEC :2010/FDAmd 5 * Information technology MPEG audio technologies Part 2: Spatial Audio Object Coding (SAOC) Amendment 5: SAOC Reference Software ISO/IEC FDIS * Information technology High efficiency coding and media delivery in heterogeneous environments Part 1: MPEG media transport (MMT) (Revision of ISO/IEC :2014, ISO/IEC :2014/Amd 1:2015, ISO/IEC :2014/FDAmd 2, ISO/IEC :2014/Cor 1:2015, ISO/IEC :2014/CD Cor 2) ISO/IEC :2015/FDAmd 4 * Information technology High efficiency coding and media delivery in heterogeneous environments Part 3: 3D audio Amendment 4: Carriage of system data

21 ISO/IEC FDIS * Automatic identification and data capture techniques Bar code print quality test specification Linear symbols (Revision of ISO/IEC 15416:2000) ISO/IEC FDIS * Information technology Document description and processing languages Office Open XML File Formats Part 1: Fundamentals and Markup Language Reference (Revision of ISO/IEC :2012) ISO/IEC FDIS * Information technology Document description and processing languages Office Open XML File Formats Part 4: Transitional Migration Features (Revision of ISO/IEC :2012)