SIRIM QAS INTERNATIONAL SDN. BHD.

Size: px

Start display at page:

Download "SIRIM QAS INTERNATIONAL SDN. BHD."

Clifton O’Connor’
6 years ago
Views:

1 SIRIM QAS INTERNATIONAL SDN. BHD.

2 A little bit about SIRIM Berhad 16 September 1975 SIRIM was established after the merger between SIM (Standard Institution of Malaysia) NISIR (Standards and Industrial Research Institute of Malaysia) 1st September 1996 SIRIM was corporatised as a wholly-owned company of the Malaysian Government under the Ministry of Finance Incorporated

3 ORGANISATION STRUCTURE CHAIRMAN & BOARD OF DIRECTORS Company Secretary Internal Audit Subsidiaries President and Chief Executive President s Office Corporate Division Research & Technology Division Standards & Quality Division Engineering & Support Services Division Marketing & Business Development Division

4 GROUP CORPORATE STRUCTURE SIRIM BERHAD WHOLLY-OWNED SUBSIDIARIES ASSOCIATE COMPANY SIRIM QAS International Sdn Bhd Sime-SIRIM Technologies Sdn Bhd SIRIM Training Services Sdn Bhd

5 50 acres site Block 9, 11, 12, 13, 14, 16, 21, 22 Testing Labs Block 4, 8 & 25

6 Provide outreach services to industries all over the country KOTA BHARU BUTTERWORTH Kulim* KOTA KINABALU KUANTAN SHAH ALAM Bukit Jalil* Sepang* Rasa* SEREMBAN MELAKA JOHOR BAHRU *Kulim - Advanced Materials Research Centre (AMREC) *Sepang - Techno-Economy Commercialisation Centre - National Metrology Laboratory *Rasa - National Centre for Machinery & Tooling Technology *Bukit Jalil -Advanced Manufacturing Technology Centre

7 State Offices Negeri Sembilan Terengganu Pahang Johor Melaka Sabah Penang Perak Kelantan

8 SIRIM QAS INTERNATIONAL SDN. BHD.

9 About Us Established in 1996 as a wholly-owned subsidiary of SIRIM Berhad Took over all certification and inspection services from SIRIM Berhad; and took over testing services in 2000 Staff strength = 503 Occupying 11 Buildings in SIRIM Complex No of certifications issued > 6000 Based in Malaysia with clients in Thailand, Australia, New Zealand, China, Indonesia, Myanmar, Vietnam, Korea, Brunei, Philippines, Taiwan, Germany, Spain, India and SiL Sri Lanka.

SIRIM QAS INTERNATIONAL SDN. BHD. BOARD OF DIRECTORS COMPANY SECRETARY CERTIFICATION ADVISORY COMMITTEE (CAC) GENERAL MANAGER SIRIM QAS INTL. CHINA LEE LAY KUAN MANAGING DIRECTOR Y. BHG.

SYSTEM CERTIFICATION DEPARTMENT PARAMA ISWARA SUBRAMANIAM HEAD FOOD, AGRICULTURE & FORESTRY SECTION RADZIAH MOHD DAUD HEAD MECHANICAL & AUTOMOTIVE SECTION KHALID HASSAN HEAD CIVIL & CONSTRUCTION

10 SIRIM QAS INTERNATIONAL SDN. BHD. BOARD OF DIRECTORS COMPANY SECRETARY CERTIFICATION ADVISORY COMMITTEE (CAC) GENERAL MANAGER SIRIM QAS INTL. CHINA LEE LAY KUAN MANAGING DIRECTOR Y. BHG. DATO MARIANI MOHAMMAD SHARIAH ADVISORY COUNCIL (SAC) MANAGING DIRECTOR S OFFICE COUNSEL (LEGAL) - NORRIDZA ABDUL HALIM SENIOR MANAGER (MSQOHSE) - FAUZIAH AHMAD SENIOR GENERAL MANAGER MANAGEMENT SYSTEM CERTIFICATION DEPARTMENT PARAMA ISWARA SUBRAMANIAM HEAD FOOD, AGRICULTURE & FORESTRY SECTION RADZIAH MOHD DAUD HEAD MECHANICAL & AUTOMOTIVE SECTION KHALID HASSAN HEAD CIVIL & CONSTRUCTION SECTION MOHD AZAM MOHD YUNUS HEAD ELECTRICAL & ELECTRONIC SECTION ZAKARIA MOHAMAD NOR HEAD CHEMICAL & MATERIAL SECTION DR. YAP CHEE KEONG SENIOR GENERAL MANAGER TESTING SERVICES DEPARTMENT TN. HJ. ABDUL AZIZ LONG SENIOR GENERAL MANAGER OFFICE EXECUTIVES (SALES) CUSTOMER SERVICE CENTER HEAD MECHANICAL & AUTOMOTIVE SECTION TN. HJ. SUHAIMI MAHMOOD HEAD CHEMICAL & CONSUMER SECTION HAHNAS MAHBUT HEAD ELECTROMAGNETIC COMPATIBILITY SECTION SHAIK MOHD JAMALDIN HEAD (CARETAKER) COMMUNICATION & MULTIMEDIA SECTION SHAIK MOHD JAMALDIN SENIOR GENERAL MANAGER PRODUCT CERTIFICATION & INSPECTION DEPARTMENT NUR FADHILAH MUHAMMAD SENIOR GENERAL MANAGER OFFICE EXECUTIVES (SALES) CUSTOMER SERVICE CENTER HEAD ENGINEERING INSPECTION SECTION IR. KASIM AHMAD HEAD PRODUCT CERTIFICATION SECTION MOHD HAMIM IMAM MUSTAIN HEAD COMMUNICATION & MULTIMEDIA CERTIFICATION SECTION FAUZIAH FADZIL HEAD TECHNICAL SECTION CHEN SENG HOCK GENERAL MANAGER CORPORATE SUPPORT SERVICES DEPARTMENT HALIZA IBRAHIM SENIOR MANAGER HUMAN RESOURCE & ADMINISTRATION SECTION HAMIDAH AB HAMID SENIOR MANAGER STRATEGIC PLANNING SECTION AZLAN ADNAN SENIOR MANAGER FINANCE SECTION SHAIFFUDDIN SARIRAN SENIOR MANAGER CORPORATE AFFAIRS & MARKETING SECTION PATRICIA LIMBANG HEAD (CARETAKER) SERVICES SECTION LEE LAY KUAN HEAD ELECTRICAL & ELECTRONIC SECTION M. ZAMRI MUSTAFFA HEAD TECHNICAL SECTION AMINAH ANG HEAD CIVIL & CONSTRUCTION SECTION TN. HJ. MOHD FAUZI ISMAIL SENIOR MANAGER SALES & CUSTOMER SERVICES SECTION CHANG BOON PING HEAD FIRE PROTECTION SECTION ROHAYA IBRAHIM HEAD SUSTAINABILITY CERTIFICATION SECTION SABARINAH MARZUKY HEAD TECHNICAL AND CALIBRATION SECTION ABD. RAHMAN DOLMAT

11 ACCREDITATIONS AND RECOGNITIONS

ACCREDITATIONS BY STANDARDS MALAYSIA For MS

1722: Part 1, HACCP, Chain-of- Custody and

Automotive, Fire Protection, Calibration,

12 ACCREDITATIONS BY STANDARDS MALAYSIA For MS ISO 9001, MS ISO 14001, OHSAS 18001, MS 1722: Part 1, HACCP, Chain-of- Custody and Product Certification Schemes For Civil & Construction, Electrical & Electronic, Chemical & Consumer, Mechanical & Automotive, Fire Protection, Calibration, Communications & Multimedia and Electromagnetic Compatibility

13 ACCREDITATIONS BY UNITED KINGDOM ACCREDITATION SERVICES (UKAS) For Quality Management System ISO 9001 Certification Scheme For Quality Management System for Medical Devices ISO Certification Scheme For Environmental Management System ISO Certification Scheme Information Security Management System ISO/IEC Certification Scheme

14 Other Accreditations and Recognitions Approval by the International Automotive Task Force (IATF) in order for SIRIM QAS International to offer ISO/TS certification for the automotive sector. Accepted as IQNet Partner, an international certification network formed by 37 partner organizations with more than 200 subsidiaries. Approved by the Malaysian Timber Certification Council (MTCC) as Notified Certification Body for the Malaysian Timber Certification Scheme (MTCS) Affiliated with the Scientific Certification System (SCS), A Forest Stewardship Council (FSC) accreditation body based in the USA

Other Accreditations and Recognitions (continue) Approved by IT Services Management Forum (itsmf) to provide certification to ISO/IEC 20000 IT Service Management Certification Accepted as an Issuing

15 Other Accreditations and Recognitions (continue) Approved by IT Services Management Forum (itsmf) to provide certification to ISO/IEC IT Service Management Certification Accepted as an Issuing and Recognising National Certification Body (NCB) and Certification Body Testing Laboratory (CBTL) in the IECEE CB Scheme Appointed as Designated Testing Laboratory and Certification Body by Energy Commission of Malaysia for the issuance of Certificate of Conformity in relation to ASEAN EE MRA and APEC EE MRA for electrical and electronic equipment Certified Packaging Laboratory by the International Safe Transit Association (ISTA), USA

16 Other Accreditations and Recognitions continue Approved as Underwriter s Laboratories (UL) testing laboratory for UL 10B - Fire Test of Door Assemblies and for UL 10C -Positive Pressure e Fire Tests s of Door Assemblies. es Recognised by the Department of Occupational Safety and Health Malaysia (DOSH) as an Inspecting Authority under the Fourth Schedule of Factories and Machinery (Steam Boiler and Unfired Pressure Vessel) Regulations, 1970 Approved by CSA International as a qualified testing facility for testing of electrical and electronic products to Canadian Standards.

17 Other Accreditations and Recognitions continue Appointed by Suruhanjaya Komunikasi dan Multimedia Malaysia (SKMM) as the Certifying Agency for communications ca o and multimedia eda products for the Malaysian ays a market. Appointed by the Ministry of International Trade and Industry (MITI) enforce mandatory standards for the imporatation of iron and steel (for non-construction use).

18 Certification Marks for Management Systems ISMS SIRIM CERTIFIED TO ISO/TS 16949:2002 REGISTRATION No: XXXXX CERTIFIED TO ISO/IEC REGISTRATION No: XXXXX Certified organizations are authorized to use the certification marks subject to the terms & conditions.

19 Certification Marks for Products SIRIM SIRIM SIRIM SIRIM Certified organizations are authorized to use the certification g marks subject to the terms & conditions.

20 SIRIM Labels Regulated Non-Regulated

21 SIRIM QAS INTERNATIONAL SDN. BHD. SCOPE OF SERVICES

22 MANAGEMENT SYSTEM CERTIFICATION Quality Management System ISO 9001 * ISO/TS * ISO * MS 1900 Environmental Management System * ISO Occupational Health & Safety Management System OHSAS * MS 1722: Part 1 Information Security Management System * ISO/IEC IT Service Management System * ISO Food Safety System Food Safety Management System * ISO HACCP * MS 1480 Good Manufacturing Practice * MS 1514

23 MANAGEMENT SYSTEM CERTIFICATION Eco-label Scheme based on 18 SIRIM Eco-label Criteria Roundtable for Sustainable Palm Oil (RSPO) Certification United Nations Framework Convention for Climate Change (UNFCCC) Clean Development Mechanism (CDM) Validation, Verification and Certification Scheme Forest Management Certification Chain of Custody (CoC) for Forest-based Products IQNet Social Accountability Certification * SA8000 Malaysian Brand Certification

24 PRODUCT CERTIFICATION & INSPECTION Product Certification Scheme Products certified to the requirements of Malaysian or International Standards Engineering Inspection Issuance of IECEE-CB Test Certificates Inspection services on behalf of 20 foreign certification bodies Third party inspection, pre-shipment inspection and auditing related to quality

ENGINEERING INSPECTION Recognized by the Department of Occupational Safety and Health (DOSH) as Inspecting

Third Party Inspection and Verification body as per regulatory requirements (DOSH, Energy Commission, etc),

inspection Third Party Inspection and Verification on welded or non-welded structures and components on

25 ENGINEERING INSPECTION Recognized by the Department of Occupational Safety and Health (DOSH) as Inspecting Authority under the Fourth Schedule of Factories and Machinery (Steam Boiler and Unfired Pressure Vessel) Regulations, To support the oil & gas, power/energy, process industries and other engineering sectors as Independent Third Party Inspection and Verification body as per regulatory requirements (DOSH, Energy Commission, etc), codes, standards and specifications for any items relatedto new construction as well as in-service inspection Third Party Inspection and Verification on welded or non-welded structures and components on behalf of Owners or Employers during construction, shut down for independence reporting (i.e. Materials, Pressure Vessels, Boilers, Pipings, Platforms, Steel Beams, Steel Columns, Rails, Bridges, Ducting, Casing etc)

26 INSPECTION SERVICES ON BEHALF OF FOREIGN CERTIFICATION BODIES

27 ESTABLISHED BILATERAL MUTUAL RECOGNITION TO FACILITATE TWO WAY TRADE THROUGH MOU, SPECIFIC AGREEMENTS, ETC. APPOINTED AS THE INSPECTION BODY FOR 20 FOREIGN CERTIFICATION BODIES / AGENCIES SUCH AS CSA, VDE, KEMA, JQA, JET, SEV, CEBEC, DEMKO, IMQ, SIQ, ASTABEAB, SEMKO, FIMKO, LCIE, NEMKO, BPS, IRAM, CQC, KTL AND ONSPEX. OTHER SERVICES CONFORMITY CERTIFICATE PROGRAM FOR PRODUCTS ENTERING KINGDOM OF SAUDI ARABIA & ALGERIA THIRD PARTY INSPECTION, PRE-SHIPMENT INSPECTION AND AUDITING RELATED TO QUALITY. CSA-SIRIM SIRIM CUSTOMER SERVICE CENTER.

28 CSA International, Canada CEBEC (SGS-CEBEC Belgium) LCIE (France) DEMKO (UL-DEMKO Denmark) BPS (The Philippines) VDE Testing And Certification Institute (Fed. Rep.of Germany) IMQ (Italy) NEMKO (Norway) KEMA Quality B.V (Netherlands) SIQ (Slovenia) IRAM (Argentina)

Japan Quality Assurance Organization (JQA) ASTA-BEAB

Technology Laboratories (JET) SEV - Electrosuisse

Certification Centre (CQC) SEMKO AB (Sweden) OnSpex-CSA SGS

29 Japan Quality Assurance Organization (JQA) ASTA-BEAB (Intertek, UK) Japan Electrical Safety & Environment Technology Laboratories (JET) SEV - Electrosuisse (Switzerland) Korea Testing Laboratory (KTL) China Quality Certification Centre (CQC) SEMKO AB (Sweden) OnSpex-CSA SGS FIMKO LTD (Finland) Saudi Standards, Metrology And Quality Organization i (SASO)

30 Testing Services We provide testing, evaluation and assessment on products for their compliance with standards, regulatory requirements and specifications

31 TESTING SERVICES Electromagnetic Compatibility (EMC) Communications & Multimedia Electrical & Electronic Civil & Construction Mechanical & Automotive Chemical & Consumer Fire Protection ti Issuance of IECEE-CB Test Reports Consignment Service

32 ELECTROMAGNETIC COMPATIBILTY TESTING Domestic household appliances Industrial, scientific & medical equipment IT equipment Lighting apparatus Car components

33 COMMUNICATION & MULTIMEDIA TESTING Telecommunication Products Radio Communication Products Related Accessories

34 ELECTRICAL & ELECTRONIC TESTING Lamp & Photometry Audio-video & Electronic Wiring Accessory Domestic Appliances Cable & Wire Component / Materials

35 CIVIL & CONSTRUCTION TESTING Mechanical Testing of Metallic Materials e.g Reinforce steel, fasteners, pipes and fittings, steel water tanks Concrete & Structural e.g Cement, pavers, natural stones, playground equipment Plastic and Ceramics e.g Plastic pipes and fittings, ceramic tiles, sanitary wares, clay pipes Building Physics e.g Thermal insulation materials, acoustic panels, energy efficiency glazing Lifting Devices Wire rope slings, chain slings, lever hoists, wire ropes and cables

36 MECHANICAL AND AUTOMOTIVE TESTING Gas Appliances e.g kerosene stove, LPG regulator, Personal Protective Equipment e.g Visors, safety vest, goggles gg Packaging e.g Jerricans, boxes, plastics containers Mechanical Products e.g water meter, gate valves

37 CHEMICAL & CONSUMER TESTING Industrial Products e.g Industrial Chemicals, Building Materials Consumer Products e.g Detergents, t Herbal product Food and Nutrient e.g Spices, Sugar Water e.g Potable Water, Mineral Pot Coating Materials e.g Varnish, Road marking paints, paints Textile and Paper e.g Fabrics, Carpets Microbiology e.g Disinfectant, foods Specialized Oil e.g Fuel Oil, Gear Lubricant

39 ORGANISATION STRUCTURE HEAD Rohaya Ibrahim SR. DRAUGHTWOMAN Fatimah Thaharin ADMIN ASSISTANT Ernizalinawati Abdullah EXECUTIVE Zaini Ahmad Hanafi Mohamad Abdullah Syahril Mat Jani Wan Mohd.Khairi Wan Yahya Kamarulzaman Mat Zin Sharifah Nur Badariah Shafie Kamaruddin TECHNICIAN K. Thyagarajan A/L Karalan Rahmat Miskun Khairudin Jabar Izam Mahmood M. Safuan Musa Izanzamzury Zaini i Muhammad Hanaffi Muhamad Izzul Ibrahim

40 FIRE PROTECTION TESTING SECTION (FPS) MAINLY CATER TWO BROAD AREAS OF TESTING 1. PASSIVE FIRE PROTECTION 2. ACTIVE FIRE PROTECTION

41 CURRENT SERVICES : PASSIVE FIRE PROTECTION Fire Resistance Test on Non-load bearing and Load bearing Vertical Elements of Construction. Fire Resistant Timber Doorsets Fire Resistant Composite Doorsets Fire Resistant Steel Doorsets Fire Resistant t Sliding Doorsets Fire Resistant Glaze Doorsets Fire Dampers Lift Landing Door Brick/Block Walls Drywall Partition/Panel system Precast Wall Panel Roller Shutter Assemblies (Vertical and Sliding) Penetration Seals Glazing

42 RELEVANT STANDARDS USE FOR FIRE RESISTANCE TEST: MS 1073 : PART 2 : 1996 Method for determination of the fire resistance - general principles MS 1073 : PART 3 : 1996 Method for determination of the fire resistance - type of doorsets BS 476 : PART 20 : 1987 Method for determination of the fire resistance of elements of construction - general principles BS 476 : PART 21 : 1987 Method for determination of the fire resistance of loadbearing elements of construction BS 476 : PART 22 : 1987 Method for determination of the fire resistance of non-loadbearing elements of construction

43 PASSIVE FIRE PROTECTION Indicative Fire Resistance Test on Products/systems: Door Hardware Horizontal Building Elements Vertical Building Elements Penetration Seals Mechanical Endurance Test: Cyclic Test for Side-Hung Fire Resistant Doorset Reaction to Fire Tests: Non-Combustibility test Fire Propagation Test Surface Spread of Flame Test

47 NEW SERVICES A) Capability To Conduct Fire Resistance Test In Accordance With The Following Standards; - BS EN : 1999 Fire Resistant Tests Part 1 : General Requirements - BS EN : 2000 Fire Resistance Tests For doors and Shutter Assemblies Part 1 : Fire Door and Shutters - BS EN : 1999 Fire Resistance tests For Non Loadbearing Elements Part 1 : Walls - BS EN : 1999 Fire Resistance Tests For Loadbearing Elements Part 1 : Walls

48 NEW SERVICES B) UL Approved Laboratory for Fire Door Testing in accordance with the following standards; - ANSI/UL10B : Fire Tests of Door Assemblies - ANSI/UL10C : Positive Pressure Fire Tests of Doors Assemblies Both standards require fire test and hose stream test to be carried out on the fire door

49 Vertical Fire Resistance Test Furnace

50 Fire Resistance Test on Composite Doorset

51 Fire Resistance Test on Glass Doorset

52 Fire Resistance Test on Steel Doorset

53 Fire Resistance Test on Steel Roller Shutter

54 Fire Resistance Test on Lift Landing Door

55 Fire Resistance Test on Brick Wall

56 Fire Resistance Test on Loadbearing Wall

57 Fire Resistance Test on Fire Damper

58 Fire Resistance Test on Penetration Seal (R&D)

59 CYCLIC MOVEMENT ENDURANCE TEST General requirement ; a doorset shall subjected to 100,000 cycles of continuous opening and closing Test specimen; doorset of 2100mm(H) 1000mm(W) constructed exactly as that for fire resistance test Procedure: Before the test, self closure system (door closer) shall be adjusted to bring the door to the closed position in 4 to 6 seconds Opening of not less than 75 but not more than 90 After completion of test, doorset shall be capable of closing properly, maintaining all clearance, show no wear or damage on any parts that may impair its reliability of functioning

60 Cyclic Movement Endurance Test

61 UL FIRE TEST

62 UL FIRE TEST

63 UL FIRE TEST

64 UL FIRE TEST

65 DETERMINATION OF INDICATIVE FIRE RESISTANCE TEST PURPOSE To test the products/ systems that require specific fire-resistance rating to cater to the demand of various sectors comprising of regulators, professionals and manufacturers in the areas of fire safety and protection. The areas involve are: R & D Product/Certification Listing Scheme Non-Standard Testing Horizontal Element Testing

66 Indicative Fire Resistance Test Furnace

67 Indicative Test on Ironmongeries

68 Indicative Test on Partition System (R&D)

69 Indicative Test on Pre-Insulated Pipe (R&D)

70 Fire Test On Safe

71 REACTION TO FIRE TESTS S

72 DETERMINATION OF NON-COMBUSTIBILITY TEST: PURPOSES A method of test for determining whether building materials are combustible or non-combustible within the meaning of the definition of the standard used. STANDARD BS 476 : PART 4 : 1970 (1984) TEST SPECIMEN 6 Test specimens SIZE OF SPECIMEN 40 mm(w) x 40 mm (b) x 50mm (h)

73 Non-combustibility Apparatus

74 DETERMINATION OF FIRE PROPAGATION TEST: PURPOSES A method of test that provides a comparative measure of the contribution to the growth of fire made by an essentially flat material, composite or assembly STANDARD BS 476 : PART 6 : 1989 TEST SPECIMEN 6 Test specimens SIZE OF SPECIMEN 225 mm x 225 mm x sample thickness ( Not greater than 50mm)

75 Fire Propagation Test Apparatus

76 DETERMINATION OF SURFACE SPREAD OF FLAME TEST: PURPOSE A method of test for measuring the lateral spread of flame along the surface of specimen of product oriented in the vertical position under opposed flow conditions. STANDARD BS 476 : PART 7 : 1997 TEST SPECIMEN 10 Test specimens SIZE OF SPECIMEN 885 mm x 270 mm x sample thickness ( Not greater than 50mm)

77 Surface Spread of Flame Test Apparatus

78 ACTIVE FIRE PROTECTION Performance Tests On Portable Fire Extinguishers CO2, Water, Foam, Dry Powder Fire Hose Reels Fire Reel Hoses CO2 Valves Breeching Inlet Landing Valve

79 Relevant Standards used for Active Fire Protection MS 1179 : 1990 Performance Tests On Portable Fire Extinguishers BS EN 671 : 1995 Fire Hose Reels BS EN 694 : 1994 Fire Reel Hoses BS 5041 : 1987 Landing Valves BS 341 : 1991 CO2 Valves

80 Fire Extinguisher Performance Test (Class A)

81 Fire Extinguisher Performance Test (Class B)

82 THANK YOU General Line Tel : Fax : SIRIM QAS International Sdn. Bhd. Building 8, No. 1, Persiaran Dato Menteri qas_marketing@sirim.my Web : Section 2, P.O. Box Shah Alam Selangor Darul Ehsan

INTRODUCTION TO SIRIM QAS INTERNATIONAL SDN. BHD.

INTRODUCTION TO SIRIM QAS INTERNATIONAL SDN. BHD. By: Azlan Adnan Sales, Marketing & Business Development SIRIM Berhad in Brief 16 September 1975 SIRIM was established after the merger between SIM (Standard