LCS 2 YOUR digital infrastructure

Transcription

1 FIBRE OPTIC SOLUTIONS IN BUILDINGS LCS 2 YOUR digital infrastructure THE GLOBAL SPECIALIST in electrical and digital building infrastructures

2

3 fibre Optic solutions in buildings Legrand presents its new FttO Fibre to the OFFice OFFer in Order to answer the Latest challenges in buildings. 1 FIBRE OPTICS, ThE answer TO ThE LaTEST ChaLLENgES IN BUILdINgS 2 FULL IP - FTTO: YOUR digital INFRaSTRUCTURE 3 SERvICES 4 SELECTION ChaRT 5 CaTaLOgUE PagES YOur digital infrastructure fibre Optic solutions 1

4 1 fibre optics, the answer to the latest challenges in buildings the Latest challenges in buildings these days, the challenges affecting buildings have changed. the trend is for users to require more interactive applications and their expectations in terms of cost and energy performance have increased, combined with demands for flexibility and modularity which have become the watchwords with a view to inevitable space reconfiguration. Changing behaviours: Video streaming, Videoconferencing, Cloud Computing (Data hosting/ Remote servers, Virtualising workstations, SaaS applications: Salesforce) Convergence of applications: IP video surveillance, VoIP Telephony, Active management & building security Economic & energy efficiency: Fewer technical equipment rooms (distribution board on each floor) Reduced energy consumption in commercial buildings Optimised digital infrastructure Flexibility & modularity: Reconfiguring spaces, Assignment of new activities Ethernet Gigabit VoIP Ethernet 10 Gigabits CCTV CAPEX/OPEX technologies evolving to meet companies latest needs PoE Copper cat. 6 A FTTO/FTTD Copper cat. 5 E Copper cat

5 the advantages OF OpticaL Fibre OPTImISED SuRFACE AREA 60% less technical equipment room space in tackling the latest challenges in buildings, the great benefit of optical fibre is that it satisfies the needs of users with its enhanced performance in terms of speed, energy saving and modularity over increasing distances, as well as optimised management of space. EnERgy SAVIng EnhAnCED PERFORmAnCE -10% energy consumption for data transmission 300 metres with a guaranteed speed of 10 gigabits ImPROVED DEnSITy 1 = 12 FO cable copper cables YOur digital infrastructure fibre Optic solutions 3

6 2 full ip - fibre to the Office: digital infrastructure for all types of installation installation FOr FaLse ceilings Or raised access FLOOrs the individual desk is equipped with an area distribution box that can be installed in a false ceiling or raised access floor. the optical signal is converted to a copper signal by the active area box. the active area box distributes five rj 45-gigabit outlets, including four poe/poe+ ports (max. 120 w). Active zone distribution box FO floor distribution cabinet Copper cords for area connections mosaic column mosaic column FO cable for vertical distribution Access control WiFi terminal Copper cords to the workstation Copper cords to the workstation mosaic RJ 45 ourlet with copper crosspiece example of a configuration distributing optical fibre for false ceilings or raised access floors active area distribution box equipped with LC connectors Lets you distribute optical fibres in work areas. equipped with a fibre optic accessory to coil the fibre and a set of five rj 45-gigabit outlets including four poe/poe+ ports (max. 120 w). data sheets available on request. 4

7 installation in a refurbishment project the open space is equipped with a fibre optic/copper converter switch. the switch converts the optical signal to a copper signal in the workspace. it distributes four rj 45-gigabit poe/poe+ (max. 60 w) connectors in an area within the open space. multiple connection requirements are integrated. Zone distribution box FO floor distribution cabinet FO cable for horizontal distribution Fibre optic switch unit Fibre optic switch unit FO cable for vertical distribution Fibre optic switch unit Copper cords to the workstation example of a configuration distributing optical fibre via dlp Four-module fibre optic converter switch distributes the optical fibre to the computer connectors. can be installed directly on mosaic dlp trunking or mosaic columns. the switch distributes four rj 45-gigabit poe/poe+ connectors (max. 60 w) in an area within the open space. data sheets available on request. YOur digital infrastructure fibre Optic solutions 5

8 3 services offering you assistance at each stage of your projects the Legrand service Legrand offers a whole range of services to professionals, to help them create fibre-optic infrastructures to the workstation (FttO). Training courses: Catalogue training: on fibre optics incorporating FTTO solutions Project training: customised, for FTTO projects All training courses on LCS PRO 2 Software: Free download from Customer support: Assistance with FTTO studies Contact the regional branch Technical support: The Pro Relations department will answer all your questions: Ask a question concerning a product, a standard, an installation, etc. In the preliminary project phase During implementation After the sale 6

9 4 selection chart List of catalogue numbers to make it easier to select from our range of products. EqUIPmENT FOR INdIvIdUaL workstation EqUIPmENT FOR ShaREd workstation rj 45 cat 6 connector - Ftp - 2 modules Fibre-optic / copper converter switch cat 6 - rj 45 strands / stripped F/utp Length 8 m Length 15 m power supply for fibre optic /copper switch active area box False ceiling mount for active area box power supply for fibre optic / copper switch 3m sc/lc > 3 m discover our customised offer False floor mount for active area box area distribution box assembly area BOx <-> FLOOR distributor CaBINETS Fast-connection multimode connector 50 µm Om 3 / Om µm Lc/upc pigtail - 10 gb - Om 3-50/125 µm- sc Fast-connection multimode connector 50µmOm3/Om4900µm sc/upc pigtail - 10 gb - Om 3-50/125 µm - sc Fibrecable-Om3multi-mode50/125µm-6fibres FLOOR distributor CaBINET EqUIPmENT Floor distributor cabinet equipment Fast-connection multimode connector 50 µm Om 3 / Om µm - sc/upc pigtail - 10 gb - Om 3-50/125 µm - sc x x 2 FLOOR distributor CaBINET <-> main BUILdINg distributor CONNECTION pigtail - 10 gb - Om 3-50/125 µm - sc Om 3 multi-mode 50/125 µm optical cable - 24 fibres pigtail - 10 gb - Om 3-50/125 µm - sc EqUIPmENT IN ThE main BUILdINg distributor equipment in the main building distributor Fast-connection multimode connector 50 µm Om 3 / Om µm - sc/upc pigtail - 10 gb - Om 3-50/125 µm - sc YOur digital infrastructure fibre Optic solutions 7

10 LCS 2 fibre optics floor distribution cabinets, equipment LCS 2 fibre optics case and fast-connection connectors, pigtails Pack Cat.Nos 19 fibre optic drawer equipped with SC units Fibre optic drawer equipped with 4 SC fibre optic units for 6 multimode fibres Modular sliding drawer End stop, tilted at 45 Depth 220 mm, height 1 U Supplied with screws and wiring accessories OM3multimodeopticalcords(50/125µm) Suitablefor10GbEthernetnetwork Max. optical losses: 0.3 db For 50/125 µmmultimode installations, type OM 3 Purple sheaths SC/SC duplex cords Length:1m Length:2m Length:3m SC/LC duplex cords Length:1m Length:2m Length:3m Tight jacketed 900 µm OM 3 multimode fibre optic cables (50/125 µm) For 50/125 µm multimode installations, type OM 3 Green sheaths Suitablefor10GbEthernetnetwork Internal/external (glass sheath) 6fibres Internal/external (glass sheath) 24 fibres Fibre optic floor distribution cabinets Reversible metal cabinets with key-operated lock IP 20 - IK 08 Maximum capacity: - 24 fibres with ST connectors - 48 fibres with SC connectors - 96 fibres with LC connectors Up to 4 fibre optic units can be fitted Cat.Nos /72/73/74/76/77/78/79, /13/16/17/18/19 4 cable entries (2 at the top and 2 at the bottom) 12 outlets, 22 mm diameter (3 at the top, 3 at the bottom and 6 at the sides) Supplied with 1 black ISO 20 cable gland to hold the incoming cable and 15 feedthrough covers The outgoing cables can be clamped using a clamp at the back of the cabinet Can take 2 cassettes for pigtails Cat.No (incoming and outgoing) 292x323x92mm Black RAL Cabinet equipped with 2 SC fibre optic units for 12 multimode fibres Modular cabinet Pack Cat.Nos Fast-connection connectors Quick to connect, reliable and can be reused up to 5times Microswitch for locking the fibre inside the connector and illuminated indicator for checking for faults at the end of the process These connectors do not require any glue, polishing or special tools Installed on tight jacketed fibre (diam. 900 µm) For loose jacketed fibre (diam. 250 µm), use a spreader Cat.No or Multimode connectors SC/UPC connector 50 µm OM3/OM4 900 µm LC/UPC connector 50 µm OM3/OM4 900 µm ST/UPC connector 50 µm OM3/OM4 900 µm SC connector 62.5 µm OM1 900 µm ST connector 62.5 µm OM1 900 µm Single-mode connectors SC/UPC connector 9 µm OS1/OS2 900 µm LC/UPC connector 9 µm OS1/OS2 900 µm SC/APC connector 9 µm OS1/OS2 900 µm Tool case for preparing optical fibres for optical connectors Provides the tools required for preparing fibre optic cables, carrying out initial tests of the connection of fibres to connectors and includes accessories for easy connection in all situations Pigtails 1m,900µm 10 GIGA - 50/125 µm - OM SC connectors LC connectors x LC-PC connectors - multimode xLC-PCconnectors-multimode 9/125 µm - OS SC connectors LC connectors x LC-UPC connectors - single-mode x LC-UPC connectors - single-mode Heat-shrinkable sleeve for pigtails mm - pack of 50 sleeves Cassette for pigtails fibre capacity 8

11 LCS 2 fibre optics FTTO - Full IP LCS 2 fibre optics FTTD - Full IP Conforming to IEEE (Ethernet), POE 802.3af, PoE at, 802.1x (authentication via port), 802.1q VLAN trunking Compatible with SNMP, IPv6, QoS level 2 (802.1p) and level 3 (DiffServ), VLAN, Rapid Spanning Tree, IGMPv3 snooping Pack Cat.Nos Shared work areas Fibre optic/copper switch Used to convert and distribute the optical signal to four 10/100/1000 RJ 45 ports with auto-mdi/x and PoE/PoE+ auto-negotiation on the front One 10/100/1000 RJ 45 port with auto-mdi/x and auto-negotiation on the side for network extension Fully manageable, without fan One SFP fibre optic port 1000 base SX included, LC connector Labelling of each port with label-holder For integration in all 4-module supports, depth 50 mm minimum Supplied with its own power supply Cat.No , max. power 60 W 4 modules - White Power supply for fibre optic/copper switch Power supply for fibre optic/copper switch Cat.No modules Forinstallationintrunkingonly Individual work areas Active area box Used to convert and distribute the optical signal to five 10/100/1000 RJ 45 ports Used to power IP devices via RJ 45 ports inpoeorpoe+ One SFP fibre optic port 1000 base SX included, LC connector Labelling of each port with label-holder For installation in false ceilings or raised access floors using supports Cat.Nos / VA power supply Supports Integral optical fibre coiling cassette with quadriplex LC feedthrough Used to install the active area box Cat.No in a false ceiling Access to the area box with a pivoting flap Support for spare cords Used to install the active area box Cat.No in a raised access floor Auxiliary contact For active zone box Cat.No Used to feed back volt-free data to the IP network For integration directly in the active area box (automatic connection) Battery For active area box Cat.No Provides continuity of operation of the active area box in the event of a power cut 52 V mah Integrated directly in the active area box (automatic connection) Tight jacketed 900 µm OM 3 multimode fibre optic cables (50/125 µm) For 50/125 µm multimode installations, type OM 3 Green sheaths Suitablefor10GbEthernetnetwork Internal/external (glass sheath) 6fibres Internal/external (glass sheath) 24 fibres Pack Cat.Nos Ready-assembled area distribution box For extra low voltage distribution Centralises connections to guarantee flexibility and adaptability of the installation Installed in a false ceiling or raised access floor Connects to the floor distribution cabinet Connection to a Mosaic socket with copper feedthrough with an RJ 45/RJ 45 cord IP 21 - IK 07 Conforming to standards UTE C , NF C , NF C , EN , IEC 60950, ISO/IEC ed. 2.0, EN and IEA/TIA 568 Colour code EIA/TIA 568 A and B Cords and cables: ISO id.2.0, EN , EIA/TIA 568 Technical characteristics: - polycarbonate PC hood - polypropylene PP base -RAL Resistance of connector units on the box: 100 N - Cables anchored on support using Colring cable ties Ready-assembled area box with: - a fibre optic accessory for mounting fibre optic modules and coiling the fibre -anscfibreopticunitfor6multimodefibres Optical fibre feedthrough socket Fitted with duplex feedthrough 2 inlets/2 outlets Used for connecting 2 fibres (fitted with their connector) Supplied with protective caps Fitted with transparent marker holder 2modules 2 x SC optical fibre feedthrough socket Push-pull connection White For customised fibre optics, please contact us For our fibre optic offer, see general catalogue - high-density fibre optic drawer - fibre optic feedthrough sockets - patch cords -cables -case -areaboxes

12 follow US on head office and international department Limoges cedex - France tel.: + 33 (0) Fax: + 33 (0) exb april 2013