ACKREDITERINGSCERTIFIKAT/ACCREDITATION CERTIFICATE. Ackred. nr 1253 Provning ISO/IEC 17025

Size: px

Start display at page:

Download "ACKREDITERINGSCERTIFIKAT/ACCREDITATION CERTIFICATE. Ackred. nr 1253 Provning ISO/IEC 17025"

Julia Jones
6 years ago
Views:

1 Datum Beteckning /1985 ACKREDITERINGSCERTIFIKAT/ACCREDITATION CERTIFICATE Ackred. nr 15 Provning ISO/IEC 1705 SAAB AB Support and Services Business Unit Tactical Solutions Organisationsnummer är ackrediterat som provningslaboratorium för uppgifter enligt bilaga. Tillämpliga bestämmelser för ackrediteringen framgår av bilaga 1./is accredited as a testing laboratory for the scope specified in appendix. The applicable terms of the accreditation are specified in appendix 1. Laboratoriet är ackrediterat enligt den internationella standarden ISO/IEC 1705:005. Ackrediteringen innebär att laboratoriet har bedömts inneha erforderlig teknisk kompetens inom de områden som definieras i bilaga och tillämpar ett kvalitetsledningssystem som uppfyller ställda krav. Det ackrediterade laboratoriet ansvarar för resultatet av utförda provningar och bedömningar samt, i förekommande fall, för val av och tillämpning av arbetsmetoder inom ramen för den meddelade ackrediteringen./this laboratory is accredited in accordance with the International ISO/IEC 1705:005. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system. The accredited laboratory is responsible for the results of performed testing and submitted judgements as well as, where applicable, for the selection and application of work methods within the scope of the granted accreditation. Ackrediteringen gäller tills vidare. Styrelsen för ackreditering och teknisk kontroll (Swedac) genomför regelbundet tillsyn, och vart fjärde år en förnyad bedömning, för att bekräfta att tillämpliga bestämmelser för ackrediteringen, enligt bilaga 1 uppfylls./the accreditation is valid until further notice. The Swedish Board for Accreditation and Conformity Assessment (Swedac) regularly carries out surveillance, and a full reassessment every fourth year, in order to verify that the applicable terms of accreditation, see appendix 1 are continually fulfilled. Detta ackrediteringscertifikat utfärdades av/this accreditation certificate was issued by Pernilla Carlsson, Enhetschef enheten för industri/manager of the Industry division Beslutet om ackreditering utfärdades med stöd av artikel 5.1 i Europaparlamentets och rådets förordning (EG) nr 765/008 om krav för ackreditering och marknadskontroll m.m. och lagen (011:791) om ackreditering och teknisk kontroll. Swedac är nationellt ackrediteringsorgan ansvarigt för bedömning av kompetensen hos certifieringsorgan, kontrollorgan, laboratorier och miljökontrollanter som ansöker om ackreditering. Den här ackrediteringen har utfärdats under EA:s MLAavtal och kan därmed betraktas som likvärdig andra ackrediteringar under EA:s MLAavtal med samma ackrediteringsomfattning. /Accreditation was granted in accordance with Article 5 (1) or Regulation (EC) No 765/008 regarding accreditation and market surveillance etc. and the Act (SFS 011:791) concerning Accreditation and Conformity Assessment. Swedac is the national accreditation body responsible for the assessment of the competence of certification bodies, inspection bodies, laboratories and environmental verifier applying for accreditation. This accreditation has been issued under the EA MLA and is therefore recognised as equivalent to other accreditations issued under the EA MLA within the same accreditation scope. 1 (1)

2 Bilaga / Appendix Saab AB, Support and Services, Business Unit Tactical Solutions, Östersund /1985 titel Bas standarder/basic standards EN SSEN IEC Part : Testing and measurement techniques Electrostatic discharge immunity test EN SSEN IEC Part : Testing and measurement techniques Radiated, radiofrequency, electromagnetic field immunity test Amendment A1:008 (IEC 007) Amendment A:010 Frequency range 6MHz GHz EN SSEN IEC Part : Testing and measurement techniques Electrical fast transient/burst immunity test EN SSEN IEC Part 5: Testing and measurement techniques Surge immunity test EN SSEN IEC Electromagnetic compatibility (EMC) Part 6: Testing and measurement techniques Immunity to conducted disturbances, induced by radiofrequency fields Frequency range 150kHz 0MHz 1(10)

3 Bilaga / Appendix Saab AB, Support and Services, Business Unit Tactical Solutions, Östersund /1985 titel EN SSEN IEC Electromagnetic compatibility (EMC) Part 8: Testing and measurement techniques Power frequency magnetic field immunity test EN SSEN IEC Electromagnetic compatibility (EMC) Part 11: Testing and measurement techniques Voltage dips, short interruptions and voltage variations immunity tests Measurement on threephase power equipment excluded. EN SSEN CISPR Specification for radio disturbance and immunity measuring apparatus and methods Part 1: Methods of measurement of disturbances and immunity Conducted disturbance measurements Amendment A1:011 (CISPR 010) Also including IN SITU EN SSEN CISPR Specification for radio disturbance and immunity measuring apparatus and methods Part : Methods of measurement of disturbances and immunity Radiated disturbance measurements Amendement A1:010 Measurement in SAC, and IN SITU and on OATS (10)

4 Bilaga / Appendix Saab AB, Support and Services, Business Unit Tactical Solutions, Östersund /1985 titel Produktfamiljstandarder/Productfamily standards EN SSEN Industrial, scientific and medical (ISM) radiofrequency equipment Radio disturbance characteristics Limits and methods of measurement (CISPR 11:009, modified) Amendment A1:010 Also including IN SITU EN 550 SSEN Information technology equipment Radio disturbance characteristics Limits and methods of measurement (CISPR :008, modified) Telecommunication ports excluded EN 1895 SSEN Industrial trucks Electromagnetic compatibility (10)

5 Bilaga / Appendix Saab AB, Support and Services, Business Unit Tactical Solutions, Östersund /1985 titel Generella standarder/generic standards EN SSEN IEC Part 61: Generic standards Immunity for residential, commercial and lightindustrial environments EN SSEN IEC Part 6: Generic standards Immunity for industrial environments EN SSEN IEC Part 6: Generic standards Emission standard for residential, commercial and lightindustrial environments Amendment A1:011 Excluding measurement of telecommunication ports EN SSEN IEC Part 6: Generic standards Emission standard for industrial environments Amendment A1:011 Undantaget mätningar på telekommunikationsportar (10)

6 Bilaga / Appendix Saab AB, Support and Services, Business Unit Tactical Solutions, Östersund /1985 titel EN ISO 198 SSEN ISO 198 ISO 1151 SSISO Provmetoder för fordonskomponenter/ Testing metods vehicle components Agricultural and forestry machines Electromagnetic compatibility Test methods and acceptance criteria (ISO 198:) Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 1: General and definitions Only testing of ESA according to 6. (annex D), 6.5 (annex E) and 6.6 Accreditation is valid insofar as the required basic standards are stated elsewhere in this scope. Amendement A1:009 ISO 115 SSISO Road vehicles Electrical disturbances by narrowband radiated electromagnetic energy Component test methods Part : Absorberlined chamber Frequency range 80 MHz 18GHz ISO 115 SSISO Road vehicles Component test methods for electrical disturbances by narrowband radiated electromagnetic energy Part : Bulk current injection (BCI) Corrigendum Cor. 1:009 ISO 115 SSISO Road vehicles Component test methods for electrical disturbances by narrowband radiated electromagnetic energy Part : Harness excitation methods Only testing according to Bulk current injection (BCI) included. 5(10)

7 Bilaga / Appendix Saab AB, Support and Services, Business Unit Tactical Solutions, Östersund /1985 titel EN 109 SSEN Construction machinery Electromagnetic compatibility of machines with internal electrical power supply Accreditation is valid insofar as the required basic standards are stated elsewhere in this scope Only testing of ESA according to.5 (annex D),.6 (annex E) and.7 (ISO 115 and ) ISO Earthmoving machinery Electromagnetic compatibility Accreditation is valid insofar as the required basic standards are stated elsewhere in this scope Only testing of ESA according to 5.6 (annex D), 5.7 (annex E), 5.8 (ISO 115 and ). 5.9 (ISO 10605) and 5.10 (ISO 767) ISO SSISO Road vehicles Test methods for electrical disturbances from electrostatic discharge Corrigendum Cor. 1:010 EN 5505 SSEN 5505 CISPR Vehicles, boats and internal combustion engines Radio disturbance characteristics Limits and methods of measurement for the protection of onboard receivers Only testing of components and modules according to 6 ISO 767 SSISO Road vehicles Electrical disturbances from conduction and coupling Part : Electrical transient conduction along supply lines only Amendment Amd. 1:008 6(10)

8 Bilaga / Appendix Saab AB, Support and Services, Business Unit Tactical Solutions, Östersund /1985 titel ISO 767 SSISO Road vehicles Electrical disturbances from conduction and coupling Part : Electrical transient conduction along supply lines only ISO SSISO Road vehicles Environmental conditions and testing for electrical and electronic equipment Part : Electrical loads Only testing of starting profile.6. and load dump.6. 7(10)

9 Bilaga / Appendix Saab AB, Support and Services, Business Unit Tactical Solutions, Östersund /1985 titel Militära standarder/military standards DEFSTAN Electromagnetic compatibility Part : Platform and system test and trials MILSTD61F F 007 Department of defense interface standard Requirements for the control of electromagnetic interference characteristics of subsystems and equipment Amendment Amdt1 Methods: DRE 0 DRE 0 Inklusive metoderna/including methods: CE101 CE10 CS101 CS11 CS115 CS116 RE101 RE10 RS101 RS10 (Frequency range MHz 18GHz) 8(10)

10 Bilaga / Appendix Saab AB, Support and Services, Business Unit Tactical Solutions, Östersund /1985 titel MILSTD61E E 1999 Department of defense interface standard Requirements for the control of electromagnetic interference characteristics of subsystems and equipment AECTP500 (Cathegory 501 Equipment and subsystem tests) Inklusive metoderna/including methods: CE101 CE10 CS101 CS11 CS115 CS116 RE101 RE10 RS101 RS10 (Frequency range MHz 18GHz) 011 Electromagnetic environmental effects test and verification Inklusive metoderna/including methods: NCE01 NCE0 NCS01 NCS07 NCS08 NCS09 NRE01 NRE0 NRS01 9(10)

Bilaga / Appendix Saab AB, Support and Services, Business Unit Tactical Solutions, Östersund 15 016090 015/1985 titel NRS0 (Frequency range MHz 18GHz) M77805191 199 Elektromagnetisk skärmning av

11 Bilaga / Appendix Saab AB, Support and Services, Business Unit Tactical Solutions, Östersund /1985 titel NRS0 (Frequency range MHz 18GHz) M Elektromagnetisk skärmning av RÖSskyddade rum utgåva M Elektromagnetisk skärmning av RÖSskyddade rum utgåva Övriga standarder/other standards RTCA DO160 G 010 Environmental Conditions and Test Procedures for Airborne Equipment Including Section 1 Frequency range 150kHz 15MHz (conducted) + MHz 6GHz (radiated) Provtagning omfattas inte av ackrediteringen. Om laboratoriet ändå själv utför provtagning omfattas provningen inte av ackrediteringen. Synpunkter och tolkningar omfattas inte av ackrediteringen. Om laboratoriet ändå redovisar synpunkter och tolkningar i provningsrapporten omfattas provningen inte av ackrediteringen. Ackrediteringsomfattningen är flexibel enligt vad som anges i detta beslut. Förändrade metoder där förändringarna innefattas i den flexibla ackrediteringen får, även om nytt beslut inte har utfärdats, användas som ackrediterade metoder. The accreditation does not cover sampling activities. If the laboratory, regardless of this, performs the sampling by itself, then the testing is not considered to be performed under accreditation. The accreditation does not cover opinions and interpretations. If the laboratory, regardless of this, expresses opinions and/or provides interpretations in the test report, then the testing is not considered to be performed under accreditation. The scope of accreditation is flexible according to specification in this decision. Changed methods where the changes are included in the flexible scope may, even if a new decision has not been issued, be used as accredited methods. Ändringar är markerade med fetstil/changes are highlighted in bold. 10(10)

Ackrediteringens omfattning / Scope of accreditation Components and installation

Ackrediteringens omfattning / Scope of accreditation Components and installation Standard designation Mini-Couplers for the interconnection of electrical mains supplied equipment in road vehicles Flat non-wirable two-pole plugs 2,5A 250V for class II-equipment Conversion adapters for