FLAME SAFETY DEVICES THAT PROTECT EQUIPMENT, LIVES & THE ENVIRONMENT ARRESTERS DEFLAGRATION // ATEX CERTIFIED

Transcription

1 FLME RRESTERS DEFLGRTION // TEX CERTIFIED SFETY DEVICES THT PROTECT EQUIPMENT, LIVES & THE ENVIRONMENT

2 DEFLGRTION FLME RRESTERS // PGE Groth Corporation Groth Corporation, formerly Groth Equipment Corporation, was founded by Edward Groth on ugust 1, 1960 and incorporated on September 7th that same year. Groth began as a manufacturers representative, distributor, and re-manufacturer of pressure relief valves sold to the refining and petrochemical industries. In 1999, Groth Corporation joined Continental Disc Corporation and moved to its current Stafford, Texas manufacturing site in 00. These two events strengthened Groth s position as a global leader in low pressure safety solutions. Today, Groth is a global leader in low pressure safety equipment with representatives around the world, providing engineered solutions with uncompromising commitment to customer satisfaction. Groth industrial products are comprised of independent product lines, classified as: Pressure/Vacuum Relief Valves, lanket Gas Regulators and Flame rresters. OUR EXPERTISE & DEVOTION When choosing a solution from Groth Corporation, you can be assured that our expertise and devotion to quality will translate into efficiency and safety, and that our every effort will demonstrate our commitment to provide innovative solutions, quality products, and comprehensive service. We pride ourselves in providing expertise to the following industries: iogas Processing Chemical Equipment Food & everage OEM Oil & Gas Pharmaceutical Transportation Utilities Wastewater as well as many others. SMRT RELIEF...SFE SOLUTIONS

3 DEFLGRTION FLME RRESTERS // PGE 3 Flame rrester Overview Deflagration Flame rresters are fire safety devices used to protect stored or process media from deflagrations. deflagration flame arrester can be used on the top of a tank or as an in-line safety device where combustible gases are transported through low pressure pipe lines. Flame arresters are designed to inhibit flame propagation in gas piping systems and to protect low pressure tanks containing flammable liquids. rresters protect low flash point liquids from external sources of heat and ignition, increasing fire protection and safety. End-of-Line and In-Line Explanation elow is an explanation of the differences between End-of-Line and In-Line Flame rrester products. ISO 168 section 3.1 End-of-Line Flame rrester Flame arrester that is fitted with one pipe connection only ISO 168 section 3. In-Line Flame rrester Flame arrester that is fitted with two pipe connections, one on each side of the flame arrester SMRT RELIEF...SFE SOLUTIONS

4 DEFLGRTION FLME RRESTERS // PGE 4 TEX Flame rrester pplication Questionnaire elow is an example of the information required in order for us to help you choose the appropriate flame arrester model for your application. The illustration shows how to use the charts and graphs on the following pages to locate that information. Find the number icon on this page and its corresponding number on page. PROCESS Gas Group (choose one): NEC q METHNE q D q C Pressure Temperature Maximum Pressure Drop Required Flow IEC Xq II1 q II 1.0 bara 0 C 8 mbar 300 Nm 3 /H ir L INSTLLTION Run-Up Length (L) 1. m 80 mm Flange Size (D) 0 mm Run-Up Length Ratio (L/D) 6 80 mm = 18.7 Orientation (choose one): 7 q Vertical q Horizontal X Mounting (choose one): 8 q In-Line q End-of-Line X Refer to ISO 168, Section 7.4 Limits for use, for more information on the application limits of flame arresters. Definitions: Run-Up Length (L): Run-Up Length Ratio (L/D): pipe length on the unprotected side of the flame arrester (see diagram - tested with straight pipe) run-up length divided by pipe diameter blank downloadable version of this TEX Flame rrester pplication Questionnaire is available for your use at grothcorp.com. SMRT RELIEF...SFE SOLUTIONS

5 DEFLGRTION FLME RRESTERS // PGE How to Use the Charts & Graphs on the Following Pages Nominal Size Width Model 788 (In-Line//Vertical) SPECIFICTIONS Height 6 1 pprox. pprox. 3 * Gas (luminum (Carbon or Run Up Group ody) SS ody) Pressure Temperature Range in in psia (L/D) Lbs Lbs F (mm) (mm) (bara) (kg) (kg) ( C) " 8 3/4" 14" to II1 DN 0 () (36) (1.08) (8) (18) ( 0 to 60) 3" 9 1/" 16" to II1 DN 80 (41) (406) (1.08) (1) (7) ( 0 to 60) 4" 11 1/" 18 1/4" to 140 DN 0 (9) (464) (1.08) (19) (41) ( 0 to 60) 6" 16 1/" 1" to 140 DN (419) (33) (1.08) (4) (83) ( 0 to 60) 8" 1" " to 140 DN 00 (33) (63) (1.08) (66) (140) ( 0 to 60) " 4 3/4" 30" to 140 DN 0 (69) (76) (1.08) (8) (6) ( 0 to 60 ) 1" 8 /8" 3 1/" to 140 DN 300 (77) (86) (1.08) (139) (314) ( 0 to 60) 8 7 * urn Time t T minutes * Testing parameters based on ISO Model 788 FLOW CPCITY 4 60 Pressure Dro op [mbar] Flow Rate [Nm 3 /H ir] pplication nalysis Model 788 specifications satisfy requirements: 1,, 3, 6, 7, and 8 The pressure drop and flow requirements are checked on the Flow Capacity graph and confirm the 80mm size will satisfy the requirements SMRT RELIEF...SFE SOLUTIONS

6 PGE 6 Model 788 IEC II1 F L M E R R E S T E R PRODUCT TYPE IN-LINE VERTICL DEFLGRTION RRESTERS INDUSTRIES Oil & Gas Chemical Liquid Storage Food & everage Wastewater FETURES & ENEFITS Flame arrester element geometry maximizes flame quenching capability while minimizing pressure drop Proven spiral-wound, crimped ribbon, flame element provides reliable flame protection Modular design allows easy and costeffective flame bank maintenance Drains and instrument ports available upon request Thermocouple is required for TEX Exterior painting or coating available DIN or SME/NSI drilling available TECHNICL DETILS Sizes " through 1" Housing standard material: carbon steel (WC/CS), stainless steel (CF8M/316), aluminum (36/6061) Flame element standard material: 316L stainless steel Other materials available upon request Good for IEC gas group II1 (MESG > 1.14 mm) Certified to TEX Directive 94/9/EC in compliance with EN ISO 168:0 Certificate #: IExU1TEX018 X

7 PGE 7 0 Nominal Size Model 788 (In-Line//Vertical) SPECIFICTIONS Width Height Pressure Run Up * Gas pprox. (luminum ody) pprox. (Carbon or SS ody) Temperature Range Group (L/D) in in psia Lbs Lbs F (mm) (mm) (bara) (kg) (kg) ( C) " 8 3/4" 14" to II1 DN 0 () (36) (1.08) (8) (18) ( 0 to 60) 3" 9 1/" 16" to II1 DN 80 (41) (406) (1.08) (1) (7) ( 0 to 60) 4" 11 1/" 18 1/4" to 140 DN 0 (9) (464) (1.08) (19) (41) ( 0 to 60) 6" 16 1/" 1" to 140 DN (419) (33) (1.08) (4) (83) ( 0 to 60) 8" 1" " to 140 DN 00 (33) (63) (1.08) (66) (140) ( 0 to 60) " 4 3/4" 30" to 140 DN 0 (69) (76) (1.08) (8) (6) ( 0 to 60 ) 1" 8 /8" 3 1/" to 140 DN 300 (77) (86) (1.08) (139) (314) ( 0 to 60) * urn Time t T minutes * Testing parameters based on ISO 168 Model 788 FLOW CPCITY 60 Pressure Dro op [mbar] Flow Rate [Nm 3 /H ir] SMRT RELIEF...SFE SOLUTIONS

8 PGE 8 Model 798 IEC II1 F L M E R R E S T E R PRODUCT TYPE IN-LINE HORIZONTL DEFLGRTION RRESTERS INDUSTRIES Oil & Gas Chemical Liquid Storage Food & everage Wastewater FETURES & ENEFITS TECHNICL DETILS Flame arrester element geometry maximizes flame quenching capability while minimizing pressure drop Proven spiral-wound, crimped ribbon, flame element provides reliable flame protection Modular design allows easy and costeffective flame bank maintenance Drains and instrument ports available upon request Thermocouple is required for TEX Exterior painting or coating available DIN or SME/NSI drilling available Eccentric design allows for horizontal installation by preventing liquid accumulation Sizes " through 1" Housing standard material: carbon steel (WC/CS), stainless steel (CF8M/316), aluminum (36/6061) Flame element standard material: 316L stainless steel Other materials available upon request Good for IEC gas group II1 (MESG > 1.14 mm) Certified to TEX Directive 94/9/EC in compliance with EN ISO 168:0 Certificate #: IExU1TEX017 X

9 PGE 9 0 Model 798 (In-Line//Horizontal) SPECIFICTIONS Nominal Size Width Height Pressure Run Up * Gas pprox. (luminum ody) pprox. (Carbon or SS ody) Temperature Range Group (L/D) in in psia Lbs Lbs F (mm) (mm) (bara) (kg) (kg) ( C) " 13 3/4" 9 1/" to II1 DN 0 (349) (41) (1.08) (14) (31) ( 0 to 60) 3" 1 3/4" 11" to II1 DN 80 (400) (79) (1.08) (18) (38) ( 0 to 60) 4" 18" 1 1/" to 140 DN 0 (47) (318) (1.08) (4) (1) ( 0 to 60) 6" 1" 16 1/" to 140 DN (33) (419) (1.08) (0) (98) ( 0 to 60) 8" " 0 1/" to 140 DN 00 (63) (1) (1.08) (97) (187) ( 0 to 60) " /" to 140 DN 0 (76) (6) (1.08) (139) (8) ( 0 to 60 ) 1" 3 1/" 8 1/" to 140 DN 300 (86) (74) (1.08) (171) (314) ( 0 to 60) * urn Time t T minutes * Testing parameters based on ISO 168 Model 798 FLOW CPCITY 60 Pressure Dro op [mbar] Flow Rate [Nm 3 /H ir] SMRT RELIEF...SFE SOLUTIONS

10 PGE Model 7688 IEC II F L M E R R E S T E R PRODUCT TYPE IN-LINE VERTICL DEFLGRTION RRESTERS INDUSTRIES Oil & Gas Chemical Liquid Storage Food & everage Wastewater FETURES & ENEFITS Flame arrester element geometry maximizes flame quenching capability while minimizing pressure drop Proven spiral-wound, crimped ribbon, flame element provides reliable flame protection Modular design allows easy and costeffective flame bank maintenance Drains and instrument ports available upon request Thermocouple is required for TEX Exterior painting or coating available DIN or SME/NSI drilling available TECHNICL DETILS Sizes " through 1" Housing standard material: carbon steel (WC/CS), stainless steel (CF8M/316), aluminum (36/6061) Flame element standard material: 316L stainless steel Other materials available upon request Good for IEC gas group II (MESG > 0.90 mm) Certified to TEX Directive 94/9/EC in compliance with EN ISO 168:0 Certificate #: IExU1TEX016 X

11 PGE 11 0 Nominal Size Model 7688 (In-Line//Vertical) SPECIFICTIONS Width Height Pressure Run Up * Gas pprox. (luminum ody) pprox. (Carbon or SS ody) Temperature Range Group (L/D) in in psia Lbs Lbs F (mm) (mm) (bara) (kg) (kg) ( C) " 8 3/4" 14" to II DN 0 () (36) (1.60) (9) (18) ( 0 to 60) 3" 9 1/" 16" to II DN 80 (41) (406) (1.60) (13) (8) ( 0 to 60) 4" 11 1/" 18 1/4" to II DN 0 (9) (464) (1.0) (0) (4) ( 0 to 60) 6" 16 1/" 1" to II DN (419) (33) (1.0) (44) (86) ( 0 to 60) 8" 1" " to II DN 00 (33) (63) (1.0) (70) (144) ( 0 to 60) " 4 3/4" 30" to 140 DN 0 (69) (76) (1.0) 0 II (113) (3) ( 0 to 60 ) 1" 8 /8" 3 1/" to II DN 300 (77) (86) (1.0) (147) (33) ( 0 to 60) * urn Time t T minutes * Testing parameters based on ISO 168 Model 7688 FLOW CPCITY 60 Pressure Dro op [mbar] Flow Rate [Nm 3 /H ir] SMRT RELIEF...SFE SOLUTIONS

12 PGE 1 Model 7698 IEC II F L M E R R E S T E R PRODUCT TYPE IN-LINE HORIZONTL DEFLGRTION RRESTERS INDUSTRIES Oil & Gas Chemical Liquid Storage Food & everage Wastewater FETURES & ENEFITS Flame arrester element geometry maximizes flame quenching capability while minimizing pressure drop Proven spiral-wound, crimped ribbon, flame element provides reliable flame protection Modular design allows easy and costeffective flame bank maintenance Drains and instrument ports available upon request Thermocouple is required for TEX Exterior painting or coating available DIN or SME/NSI drilling available Eccentric design allows for horizontal installation by preventing liquid accumulation TECHNICL DETILS Sizes " through 1" Housing standard material: carbon steel (WC/CS), stainless steel (CF8M/316), aluminum (36/6061) Flame element standard material: 316L stainless steel Other materials available upon request Good for IEC gas group II (MESG > 0.90 mm) Certified to TEX Directive 94/9/EC in compliance with EN ISO 168:0 Certificate #: IExU1TEX01 X

13 PGE 13 0 Model 7698 (In-Line//Horizontal) SPECIFICTIONS Nominal Size Width Height Pressure Run Up * Gas pprox. (luminum ody) pprox. (Carbon or SS ody) Temperature Range Group (L/D) in in psia Lbs Lbs F (mm) (mm) (bara) (kg) (kg) ( C) " 13 3/4" 9 1/" to II DN 0 (349) (41) (1.60) (14) (3) ( 0 to 60) 3" 1 3/4" 11" to II DN 80 (400) (79) (1.60) (19) (39) ( 0 to 60) 4" 18" 1 1/" to II DN 0 (47) (318) (1.0) () () ( 0 to 60) 6" 1" 16 1/" to II DN (33) (419) (1.0) (3) (1) ( 0 to 60) 8" " 0 1/" to II DN 00 (63) (1) (1.0) (0) (191) ( 0 to 60) " /" to II DN 0 (76) (6) (1.0) (14) (88) ( 0 to 60 ) 1" 3 1/" 8 1/" to II DN 300 (86) (74) (1.0) (180) (379) ( 0 to 60) * urn Time t T minutes * Testing parameters based on ISO 168 Model 7698 FLOW CPCITY 60 Pressure Dro op [mbar] Flow Rate [Nm 3 /H ir] SMRT RELIEF...SFE SOLUTIONS

14 PGE 14 Model 7678 IEC II F L M E R R E S T E R PRODUCT TYPE END-OF-LINE VERTICL DEFLGRTION RRESTERS INDUSTRIES Oil & Gas Chemical Liquid Storage Food & everage Wastewater FETURES & ENEFITS Flame arrester element geometry maximizes flame quenching capability while minimizing pressure drop Proven spiral-wound, crimped ribbon, flame element provides reliable flame protection Modular design allows easy and costeffective flame bank maintenance Drains and instrument ports available upon request Thermocouple is required for TEX Exterior painting or coating available DIN or SME/NSI drilling available TECHNICL DETILS Sizes " through 1" Housing standard material: carbon steel (WC/CS), stainless steel (CF8M/316), aluminum (36/6061) Flame element standard material: 316L stainless steel Other materials available upon request Good for IEC gas group II (MESG > 0.90 mm) Certified to TEX Directive 94/9/EC in compliance with EN ISO 168:0 Certificate #: IExU1TEX019 X

15 PGE 1 0 Model 7678 (End-Of-Line//Vertical) SPECIFICTIONS Nominal Size Width Height * Gas pprox. (luminum ody) pprox. (Carbon or SS ody) Temperature Range Group in in Lbs Lbs F (mm) (mm) (kg) (kg) ( C) " to 140 II DN 0 (.90) (8.16) () (17) ( 0 to 60) 3" to 140 II DN 80 (6.80) (7.3) (16) (9) ( 0 to 60) 4" to 140 II DN 0 (8.8) (9.6) () (41) ( 0 to 60) 6" to 140 II DN (.7) (11) (48) (76) ( 0 to 60) 8" to 140 II DN 00 (1.8) (14.) (73) (17) ( 0 to 60) " to 140 II DN 0 (13.6) (1.4) (111) (189) ( 0 to 60 ) * urn Time t T minutes 1" to 140 II DN 300 (18.1) (17.) (14) (7) ( 0 to 60) * Testing parameters based on ISO 168 Model 7678 FLOW CPCITY 60 re [mbar] Tank Pressu Flow Rate [Nm 3 /H ir] SMRT RELIEF...SFE SOLUTIONS

16 S M R T R E L I E F... S F E S O L U T I O N S GROTH CORPORTION 1360 N. Promenade lvd. Stafford, TX Ph (81) Fax (81) sales@grothcorp.com grothcorp.com THE NETHERLNDS Energieweg 0 38 NJ Zoeterwoude-Rijndijk The Netherlands Ph +(31) Fax +(31) cdcnl@contdisc.com CHIN Room 9, Tower, COFCO Plaza No. 8 JianGuoMenNei venue eijing (000), P.R. China Ph +(86) 488 Fax +(86) 6 88 cdcchina@contdisc.com INDI 43/P/1, Mahagujarat Industrial Estate, Moraiya, Sarkhej-avla Road, hmedabad (GJ) 3813 INDI Ph +(91) Fax +(86) 6 88 gcmpl@contdisc.com Continental Disc Corporation reserves the right to alter the information in this publication without notice. // 01 Groth Corporation Reproduction without written permission is prohibited. PRINTED IN U.S.. TCH0993 VS // 081