Supplement to ISO Focus+

Transcription

1 Update Supplement to Focus+ October 2010 International Standards in process from 25 August to 30 September 2010 Committee rafts (C) registered 1 raft International Standards (IS) circulated 2 Final draft International Standards (FIS) circulated 5 Standards published 9 Standards confirmed 16 Standards withdrawn 16 Meeting calendar 18 People and places Members 26

2 International Standards in process An International Standard is the result of an agreement between the member bodies of. A first important step towards an International Standard takes the form of a committee draft (C) - this is circulated for study within an technical committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (IS). The IS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FIS), the approval criteria remaining the same. C registered Period from 25 August to 30 September 2010 These documents are currently under consideration in the technical committee. They have been registred at the Central Secretariat. TC 8 /C /C 614 /C 1751 /C 3434 /C 3903 /C TC 20 /C TC 22 /C 4164 TC 23 /C 5718 TC 44 /C /C /C Ships and marine technology Ships and marine technology Piping and machinery Ballast water management systems Part 1: ischarge sampling apparatus Ships and marine technology Toughened safety glass panes for rectangular windows and side scuttles Punch method of nondestructive strength testing Ships and marine technology Ships'side scuttles Shipbuilding and marine structures Heated glass panes for ships' rectangular windows Ships and marine technology Ships' ordinary rectangular windows Ships and marine technology Thermally toughened safety-glass panes for windows and side scuttles Aircraft and space vehicles Space systems Observed Proton Fluences over long duration at GEO and Guideline for selection of confidence level in statistical model of Solar Proton Fluences Road vehicles Road vehicles Mopeds Engine test code Net power Tractors and machinery for agriculture and forestry Harvesting equipment Blades for agricultural rotary mowers Requirements Welding and allied processes Specification and qualification of welding procedures for metallic materials Welding procedure test Part 14: Laser-arc hybrid welding of steels, nickel and nickel alloys Soft soldering fluxes Test methods Part 10: Flux efficacy tests, solder spread method Soft soldering fluxes Test methods Part 16: Flux efficacy tests, wetting balance method TC 79 /C TC 84 /C /C /C TC 85 /C /C TC 113 /C 4377 TC 114 /C TC 138 /C TC 163 /C TC 172 /C TR TC 193 /C TC 206 /C TC 229 /TS /TS JTC 1 /IEC /C Amd 1 Light metals and their alloys Titanium and titanium alloys Titanium sponge evices for administration of medicinal products and intravascular catheters Sterile, single-use intravascular catheters Part 3: Central venous catheters Sterile, single-use intravascular catheters Part 4: Balloon dilatation catheters Sterile, single-use intravascular catheters Part 5: Over-needle peripheral catheters Nuclear energy, nuclear technologies, and radiological protection Radiation protection Performance criteria for service laboratories performing biological dosimetry by cytogenetics Nuclear criticality safety Criticality accident fission numbers estimates Hydrometry Hydrometric determinations Flow measurement in open channels using structures Flat-V weirs Horology Analogue quartz clocks Fitting dimensions of movements to hands Plastics pipes, fittings and valves for the transport of fluids Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure Specifications Thermal performance and energy use in the built environment Hygrothermal performance of building components and building elements Internal surface temperature to avoid critical surface humidity and interstitial condensation Calculation methods Optics and photonics Lasers and laser-related equipment etermination of laser-induced damage threshold of optical surfaces Part 4: Inspection, detection and measurement Natural gas Natural gas Organic components used as odorants Requirements and test methods Fine ceramics Fine ceramics (advanced ceramics, advanced technical ceramics) etermination of bulk density of ceramic powders Part 2: Untapped density Nanotechnologies Nanotechnologies Vocabulary Part 5: Nano/bio interface Nanotechnologies Vocabulary Part 7: iagnostics and therapeutics for healthcare Information technology Information technology Coding of audiovisual objects Part 16: Animation Framework extension (AFX) Amendment 1: Efficient representation of 3 meshes with multiple attributes Update, Supplement to Focus -- October

3 /IEC C /IEC C /IEC C IS circulated Information technology JPSearch Part 6: Reference software Information technology Learning, education and training Metadata for learning resources Part 6: Availability, distribution, and intellectual property elements Information technology Machine Readable Test ata for biometric testing and reporting Part 2: Test Input ata Period from 25 August to 30 September 2010 These documents have obtained substantial support within the appropriate technical committee. They have been submitted to the member bodies for voting by the date shown. * Available in English only TC :2007/ Amd :2007/ Amd 3 TC 10 /IS Ships and marine technology * Security management systems for the supply chain Guidelines for the implementation of Amendment 1: Medium and small ports * Security management systems for the supply chain Guidelines for the implementation of Amendment 3: Additional specific guidance if compliance with is a management objective Technical product documentation * Technical product documentation (TP) General principles of presentation Part 15: Presentation of shipbuilding drawings /IS * Technical product documentation (TP) Indication of dimensions and tolerances Part 4: imensioning for shipbuilding drawings TC 17 /IS TC 20 Steel Cold-reduced steel sheet of higher yield strength with improved formability (Revision of 13887:2004) Aircraft and space vehicles /IS * Aircraft ground equipment Graphical symbols /IS * Aerospace Hose assemblies in polytetrafluoroethylene (PTFE) for use up to 232 C and kpa Technical specification (Revision of 10502:1992) /IS * Space data and information transfer systems Open archival information system (OAIS) Reference model (Revision of 14721:2003) Vote terminates /IS * Space data and information transfer systems - Audit and certification of trustworthy digital repositories /IS * Space systems Programme management Information and documentation management /IS TC 22 /IS /IS /IS /IS /IS /IS /IS TC :2005/Amd 1 TC 33 Space data and information transfer systems Orbit data messages (Revision of 22644:2006) Road vehicles * Road vehicles Fuse-links Part 8: Fuse-links with bolt-in contacts (Type H and J) with rated voltage of 450 V * Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 9: Portable transmitters * Road vehicles LE lamp characteristics for bulb compatible failure detection Part 1: LE lamps used for direction indicator and stop lamps * Road vehicles iagnostic communication over Internet Protocol (oip) Part 1: General information and use case definition * Road vehicles iagnostic communication over Internet Protocol (oip) Part 2: Network and transport layer requirements and services * Road vehicles iagnostic communication over Internet Protocol (oip) Part 3: IEEE802.3 based wired vehicle interface * Road vehicles Implementation of World-Wide Harmonized On- Board iagnostics (WWH-OB) communication requirements Part 4: Connection between vehicle and test equipment (Revision of /PAS :2006) Tyres, rims and valves * Tyres (ply rating marked series) and rims for agricultural tractors and machines Part 2: Tyre load ratings Amendment 1 Refractories /IS * Chemical analysis of refractory material glass and glazes etermination of Fe2+ and Fe3+ by the spectral photometric method with 1-10 phenantroline TC 34 Food products /IS * Rice etermination of biometric characteristics of kernels /IS 8586 * Sensory analysis General guidance for the selection, training and monitoring of selected and expert assessors (Revision of :1993, :2008) Update, Supplement to Focus -- October 2010

4 TC 35 /IS /IS /IS TC :2010/Amd 1 TC 44 /IS TC 45 /IS /IS /IS /IS Paints and varnishes * Paints and varnishes etermination of resistance to liquids Part 3: Method using an absorbent medium (Revision of :2007) * Paints and varnishes rying tests Part 4: Test using a mechanical recorder * Paints and varnishes rying tests Part 5: Modified Bandow-Wolff test Acoustics * Acoustics Laboratory measurement of sound insulation of building elements Part 1: Application rules for specific products Amendment 1: Guideline for the determination of the sound reduction index of joints filled with fillers and or seals Welding and allied processes * Brazing Brazer qualification Rubber and rubber products * Rubber and plastics hoses and tubing Measurement of flexibility and stiffness Part 1: Bending tests at ambient temperature (Revision of 1746:1998, 1746:1998/Cor 1:1999) * Rubber and plastics hoses and tubing Measurement of flexibility and stiffness Part 2: Bending tests at sub-ambient temperatures (Revision of 4672:1997) * Rubber and plastics hoses and tubing Measurement of flexibility and stiffness Part 3: Bending tests at high and low temperatures * Rubber compounding ingredients Silica, precipitated, hydrated Part 3: Evaluation procedures in a mixed solution of styrene-butadiene rubber and butadiene rubber /IS 8332 * Rubber compounding ingredients Sulfur Methods of test (Revision of 8332:2006) TC 67 /IS /IS TC 68 /IS Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries Petroleum and natural gas industries Aluminium alloy pipe for use as tubing for wells Petroleum and natural gas industries Aluminium alloy drill pipe thread connection gauging Financial services * Financial services Universal financial industry message scheme Part 1: Metamodel (Revision of :2004) /IS /IS /IS /IS /IS /IS TC 86 * Financial services Universal financial industry message scheme Part 2: UML profile (Revision of :2007) * Financial services Universal financial industry message scheme Part 3: Modelling (Revision of /TS :2004) * Financial services Universal financial industry message scheme Part 4: XML Schema generation (Revision of /TS :2004) * Financial services Universal financial industry message scheme Part 5: Reverse engineering (Revision of /TS :2004) * Financial services Universal financial industry message scheme Part 7: Registration * Financial services Universal financial industry message scheme Part 8: ASN.1 generation Refrigeration and air-conditioning /IS * Refrigeration systems and heat pumps Flexible pipe elements, vibration isolators, expansion joints and non-metallic tubes Requirements and classification TC :1999/Amd 1 TC 102 Fire safety Fire-resistance tests Elements of building construction Part 1: General requirements Amendment 1 Iron ore and direct reduced iron /IS 3087 * Iron ores etermination of the moisture content of a lot (Revision of 3087:1998) TC 106 entistry /IS 6876 * entistry Root canal sealing materials (Revision of 6876:2001) TC 108 /IS /IS Mechanical vibration, shock and condition monitoring * Mechanical vibration Rotor balancing Part 14: Balance quality requirements of rigid and flexible rotors Balance errors (Revision of :1997) * Mechanical vibration Rotor balancing Part 23: Balancing machines Enclosures and other protective measures for the measuring station (Revision of 7475:2002) Update, Supplement to Focus -- October

5 TC 111 Round steel link chains, chain slings, components and accessories /IS 3076 * Round steel short link chains for general lifting purposes Medium tolerance sling chains for chain slings Grade 8 (Revision of 3076:1984) TC :2005/Amd 1 TC 135 Anaesthetic and respiratory equipment * Pressure regulators for use with medical gases Part 3: Pressure regulators integrated with cylinder valves Amendment 1 Non-destructive testing /IS * Non-destructive testing Terminology Terms used in magnetic particle testing TC 146 /IS TC 147 Air quality * Indoor air Part 26: Sampling strategy for carbon dioxide (CO2) Water quality /IS * Water quality etermination of the acute toxicity to Thamnocephalus platyurus (Crustacea, Anostraca) TC :2008/ Amd 1 TC 194 Ergonomics * Ergonomics of human-system interaction Part 410: esign criteria for physical input devices Amendment 1 Biological evaluation of medical devices /IS * Medical products containing viable human cells Application of risk management and requirements for processing practices TC 201 Surface chemical analysis /IS * Surface chemical analysis X- ray photoelectron spectroscopy Measurement of silicon oxide thickness TC 210 /IEC Guide 63 Quality management and corresponding general aspects for medical devices * Guide to the development and inclusion of safety aspects in International Standards for medical devices (Revision of /IEC Guide 63:1999) /IS * Health informatics Identification of medicinal products ata elements and structures for unique identification and exchange of regulated information on pharmaceutical dose forms, units of presentation and routes of administration /IS * Health informatics Identification of medicinal products ata elements and structures for unique identification and exchange of units of measurement /IS * Health informatics Identification of medicinal products ata elements and structures for unique identification and exchange of regulated medicinal product information /IS * Health informatics Identification of medicinal products ata elements and structures for unique identification and exchange of regulated pharmaceutical product information TC 219 /IS /IS TC 229 Floor coverings * Resilient floor coverings Specification for rubber sheet floor coverings with backing * Resilient floor coverings Specification for rubber sheet floor coverings without backing Nanotechnologies /IS * Nanomaterials Quantification of nano-object release from powders by generation of aerosols IULTCS International Union of Leather Technologists and Chemists Societies /IS 2419 * Leather Physical and mechanical tests Sample preparation and conditioning (Revision of 2419:2006) /IS /IS * Leather etermination of abrasion resistance Part 1: Taber method (Revision of 17076:2006) * Leather Physical and mechanical test method for the determination of soiling Part 1: Rubbing (Martindale) method (Revision of 26082:2007) TC 211 Geographic information/ Geomatics /IS * Geographic information Registry of representations of geographic point location TC 215 Health informatics /IS * Health Informatics Identification of medicinal products ata elements and structures for unique identification and exchange of regulated information on substances Update, Supplement to Focus -- October 2010

6 FIS circulated Period from 25 August to 30 September 2010 These Final draft International Standards have been submitted to the member bodies for formal approval by the date shown * Available in English only TC 2 Fasteners /FIS 4014 * Hexagon head bolts Product grades A and B (Revision of 4014:1999) /FIS 4016 * Hexagon head bolts Product grade C (Revision of 4016:1999) /FIS 4017 * Hexagon head screws Product grades A and B (Revision of 4017:1999) /FIS 4018 * Hexagon head screws Product grade C (Revision of 4018:1999) /FIS 7048 * Cross-recessed cheese head screws (Revision of 7048:1998) /FIS 8676 * Hexagon head screws with metric fine pitch thread Product grades A and B (Revision of 8676:1999) /FIS 8765 * Hexagon head bolts with metric fine pitch thread Product grades A and B (Revision of 8765:1999) /FIS /FIS /FIS /FIS /FIS * Tapping screw and washer assemblies with plain washers (Revision of 10510:1999) * Hexalobular socket head cap screws (Revision of 14579:2001) * Hexalobular socket cheese head screws (Revision of 14580:2001, 14580:2001/Cor 1:2004) * Hexalobular socket pan head screws (Revision of 14583:2001, 14583:2001/Cor 1:2004) * Hexalobular socket raised countersunk head screws (Revision of 14584:2001) Vote terminates TC 4 /FIS TC 6 /FIS TC 17 /FIS /FIS /FIS /FIS /FIS /FIS Rolling bearings * Rolling bearings Internal clearance Part 2: Axial internal clearance for four-point-contact ball bearings Paper, board and pulps * Tissue paper and tissue products Part 8: Water-absorption time and water-absorption capacity, basket-immersion test method (Revision of :2006) Steel * Stainless steels Chemical composition (Revision of /TS 15510:2003) * Non-destructive testing of steel tubes Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness instead of the hydrostatic test (Revision of 9302:1994) * Non-destructive testing of steel tubes Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections (Revision of 9304:1989) * Non-destructive testing of steel tubes Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and transverse imperfections (Revision of 9402:1989, 9598:1989) * Non-destructive testing of steel tubes Part 4: Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections (Revision of 12095:1994) * Non-destructive testing of steel tubes Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections (Revision of 13664:1997, 13665:1997) /FIS /FIS /FIS /FIS * Hexalobular socket pan head tapping screws (Revision of 14585:2001, 14585:2001/Cor 1:2004) * Hexalobular socket countersunk head tapping screws (Revision of 14586:2001) * Hexalobular socket raised countersunk (oval) head tapping screws (Revision of 14587:2001) * Hexagon bolts with flange Small series Product grade A (Revision of 15071:1999, 15071:1999/Cor 1:2006) /FIS /FIS /FIS * Non-destructive testing of steel tubes Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections (Revision of 12096:1996) * Non-destructive testing of steel tubes Part 7: igital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections * Non-destructive testing of steel tubes Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections Update, Supplement to Focus -- October

7 /FIS /FIS /FIS /FIS TC 21 /FIS /FIS TC 22 (Revision of 10124:1994, 11496:1993, 13663:1995) * Non-destructive testing of steel tubes Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strips/ plates used for the manufacture of welded steel tubes (Revision of 12094:1994) * Non-destructive testing of steel tubes Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and transverse imperfections (Revision of 9303:1989, 9305:1989) * Non-destructive testing of steel tubes Part 11: Automated ultrasonic testing of weld seam of welded steel tubes for the detection of longitudinal and transverse imperfections (Revision of 9764:1989, 9765:1990) * Non-destructive testing of steel tubes Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes (Revision of 10543:1993) Equipment for fire protection and fire fighting * Fire detection and alarm systems Part 3: Audible alarm devices * Smoke alarms using scattered light, transmitted light or ionization (Revision of 12239:2003) Road vehicles /FIS 7116 * Mopeds Measurement method for determining maximum speed (Revision of 7116:1995) TC 23 /FIS TC 27 /FIS TC 28 Tractors and machinery for agriculture and forestry * Agricultural machinery Safety Part 11: Pick-up balers Solid mineral fuels * Hard coal Method for the measurement of the swelling of hard coal using a dilatometer Petroleum products and lubricants /FIS 3405 * Petroleum products etermination of distillation characteristics at atmospheric pressure (Revision of 3405:2000) /FIS * Petroleum products etermination of sulfur content Oxidative microcoulometry method /FIS TC 44 /FIS /FIS /FIS TC 45 /FIS TC 46 /FIS /FIS /FIS TC 58 /FIS TC 61 * Petroleum and related products etermination of ph of fireresistant fluids within categories HFAE, HFAS and HFC (Revision of 20843:2003) Welding and allied processes * Welding consumables Wire and strip electrodes, wires and rods for fusion welding of nickel and nickel alloys Classification (Revision of 18274:2004, 18274:2004/Cor 1:2005, 18274:2004/Cor 2:2006) * Non-destructive testing of welds Ultrasonic testing of welded joints Acceptance levels * Non-destructive testing of welds Ultrasonic testing Techniques, testing levels, and assessment (Revision of 17640:2005) Rubber and rubber products * Rubber- or plastics-coated fabrics Physical and mechanical tests etermination of flex resistance by the flexometer method Information and documentation * Information and documentation igital object identifier system * Information and documentation Principles and functional requirements for records in electronic office environments Part 1: Overview and statement of principles * Information and documentation Principles and functional requirements for records in electronic office environments Part 3: Guidelines and functional requirements for records in business systems Gas cylinders * Transportable gas cylinders Compatibility of cylinder and valve materials with gas contents Part 3: Autogenous ignition test for non-metallic materials in oxygen atmosphere (Revision of :1997) Plastics /FIS 178 * Plastics etermination of flexural properties (Revision of 178:2001, 178:2001/Amd 1:2004) /FIS * Plastics Polyamides etermination of e-caprolactam and w-laurolactam by gas chromatography (Revision of 11337:2004) /FIS * Petroleum and related products etermination of emulsion stability of fire-resistant fluids Part 1: Fluids in category HFAE (Revision of :2003) /FIS 4611 * Plastics etermination of the effects of exposure to damp heat, water spray and salt mist (Revision of 4611:2008) 6 Update, Supplement to Focus -- October 2010

8 /FIS * Plastics Aromatic isocyanates for use in the production of polyurethanes etermination of the isomer ratio in toluenediisocyanate (Revision of 15064:2004) /FIS 3343 * Reinforcement yarns etermination of twist balance index (Revision of 3343:1984) /FIS /FIS * Metallic and other inorganic coatings Thermal spray coordination Tasks and responsibilities * Thermal spraying Procedures for the application of thermally sprayed coatings for engineering components (Revision of 14921:2001) /FIS 4602 * Reinforcements Woven fabrics etermination of number of yarns per unit length of warp and weft (Revision of 4602:1997) /FIS :1998/ FAmd 1 TC 67 /FIS /FIS /FIS /FIS /FIS TC 92 /FIS TC 106 /FIS TC 107 * Fibre-reinforced plastics Moulding compounds and prepregs etermination of mass per unit area (Revision of 10352:1997) * Fibre-reinforced plastic composites etermination of flexural properties Amendment 1 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries * Petroleum and natural gas industries Installation and equipment for liquefied natural gas Ship-to-shore interface and port operations * Petroleum and natural gas industries esign and operation of subsea production systems Part 4: Subsea wellhead and tree equipment (Revision of :1999) * Petroleum and natural gas industries Steel pipes for use as casing or tubing for wells (Revision of 11960:2004, 11960:2004/Cor 1:2006) * Petroleum and natural gas industries Evaluation and testing of thread compounds for use with casing, tubing, line pipe and drill stem elements (Revision of 13678:2009) * Petroleum and natural gas industries Arctic offshore structures Fire safety * Fire tests Uncertainty of measurements in fire tests entistry * entistry Brackets and tubes for use in orthodontics Metallic and other inorganic coatings /FIS 3613 * Metallic and other inorganic coatings Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys Test methods (Revision of 3613:2000) /FIS 4534 * Vitreous and porcelain enamels etermination of fluidity behaviour Fusion flow test (Revision of 4534:1980) /FIS 9717 * Metallic and other inorganic coatings Phosphate conversion coating of metals (Revision of 9717:1990) TC 110 /FIS TC 117 /FIS :2004/FAmd :2004/FAmd 1 TC 118 /FIS TC 119 Industrial trucks * Industrial trucks Verification of stability Part 14: Roughterrain variable-reach trucks (Revision of 8379:1998, 8379:1998/Amd 1:2001) Fans * Fans Efficiency classification for fans * Industrial fans etermination of fan sound power levels under standardized laboratory conditions Part 1: General overview Amendment 1 * Industrial fans etermination of fan sound power levels under standardized laboratory conditions Part 3: Enveloping surface methods Amendment 1 Compressors and pneumatic tools, machines and equipment * Hand-held portable power tools Test methods for evaluation of vibration emission Part 4: Straight grinders (Revision of :1994) Powder metallurgy /FIS 3927 * Metallic powders, excluding powders for hardmetals etermination of compressibility in uniaxial compression (Revision of 3927:2001, 3927:2001/Cor 1:2008) /FIS 3953 * Metallic powders etermination of tap density (Revision of 3953:1993) TC 122 /FIS TC 138 /FIS Packaging * Packaging Linear bar code and two-dimensional symbols for product packaging (Revision of 22742:2005) Plastics pipes, fittings and valves for the transport of fluids * Plastics pipes and fittings Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels Metric series Specifications Part 3: Fittings for mechanical jointing (including PE-X/metal transitions) (Revision of :2006) Update, Supplement to Focus -- October

9 TC :2003/ FAmd :2003/ FAmd :2003/ FAmd :2003/ FAmd 74 TC 146 /FIS TC 147 Graphical symbols * Graphical symbols Safety colours and safety signs Safety signs used in workplaces and public areas Amendment 71: Safety sign P025: o not use this incomplete scaffold * Graphical symbols Safety colours and safety signs Safety signs used in workplaces and public areas Amendment 72: Safety sign P026: o not use this device in a bathtub, shower or water-filled reservoir * Graphical symbols Safety colours and safety signs Safety signs used in workplaces and public areas Amendment 73: Safety sign P027: o not use this lift for people * Graphical symbols Safety colours and safety signs Safety signs used in workplaces and public areas Amendment 74: Safety sign P028: o not wear gloves Air quality * Air quality etermination of time-averaged mass emissions and emission factors General approach Water quality /FIS 9698 * Water quality etermination of tritium activity concentration Liquid scintillation counting method (Revision of 9698:1989) TC 157 /FIS TC 159 /FIS /FIS TC 160 /FIS TC 172 Non-systemic contraceptives and STI barrier prophylactics * Condoms etermination of nitrosamines migrating from natural rubber latex condoms Ergonomics * Ergonomics Accessible design Sound pressure levels of auditory signals for consumer products * Ergonomics Accessible design Specification of agerelated luminance contrast for coloured light Glass in building * Glass in building Glass products for structural sealant glazing Part 2: Assembly rules Optics and photonics /FIS 8624 * Ophthalmic optics Spectacle frames Measuring system and terminology (Revision of 8624:2002) TC 194 /FIS Biological evaluation of medical devices * Clinical investigation of medical devices for human subjects Good clinical practice (Revision of :2003, :2003) TC 204 /FIS /FIS TC 207 /FIS TC 210 /FIS TC 211 /FIS TC 215 /FIS TC 216 /FIS /FIS TC 229 /FIS /FIS CASCO /IEC FIS JTC 1 /IEC FISP /IEC FISP Intelligent transport systems * Electronic fee collection Systems architecture for vehiclerelated tolling (Revision of /TS 17573:2003) * Intelligent transport systems Wireless communications CALM using millimetre communications Air interface Environmental management * Environmental management systems Guidelines for the phased implementation of an environmental management system, including the use of environmental performance evaluation Quality management and corresponding general aspects for medical devices * Small-bore connectors for liquids and gases in healthcare applications Part 1: General requirements Geographic information/ Geomatics * Geographic information Web Feature Service Health informatics * Health informatics Health indicators conceptual framework (Revision of /TS 21667:2004) Footwear * Footwear Test method for slide fasteners Burst strength * Footwear Test method for slide fasteners Slider locking strength Nanotechnologies * Nanotechnologies Generation of metal nanoparticles for inhalation toxicity testing using the evaporation/condensation method * Nanotechnologies Characterization of nanoparticles in inhalation exposure chambers for inhalation toxicity testing Committee on conformity assessment * Conformity assessment Requirements for bodies providing audit and certification of management systems (Revision of /IEC 17021:2006, /IEC IS ) Information technology * Software engineering Lifecycle profiles for Very Small Entities (VSEs) Part 2: Framework and taxonomy * Software engineering Lifecycle profiles for Very Small Entities (VSEs) Part 4-1: Profile specifications: Generic profile group Update, Supplement to Focus -- October 2010

10 /IEC FIS /IEC FIS /IEC FIS /IEC :2009/FIS Amd 1 /IEC FIS /IEC FIS /IEC FIS * Information technology Identification cards On-card biometric comparison * Information technology Security techniques igital signature schemes giving message recovery Part 2: Integer factorization based mechanisms (Revision of /IEC :2002, /IEC :2002/ Amd 1:2008) * Information technology Security techniques Network security Part 3: Reference networking scenarios Threats, design techniques and control issues * Information technology Coding of audio-visual objects Part 22: Open Font Format Amendment 1: Support for many-to-one range mappings * Information technology MPEG extensible middleware (MXM) Part 4: MXM protocols (Revision of /IEC :2008) * Information technology JP- Search Part 4: File format for metadata embedded in image data (JPEG and JPEG 2000) * Information technology Conformance testing for the biometric application programming interface (BioAPI) Part 3: Test assertions for BioAPI frameworks Standards published New International Standards published between 25 August and 30 September 2010 * Available in English only ** French version of standard previously published in English only TC 2 Fasteners 225:2010 * Fasteners Bolts, screws, studs and nuts Symbols and descriptions of dimensions 12474:2010 TC :2010 TC 8 /PAS 28002:2010 Hexagon socket head cap screws with metric fine pitch thread Paper, board and pulps Paper and board etermination of grease resistance Part 3: Turpentine test for voids in glassine and greaseproof papers Ships and marine technology * Security management systems for the supply chain - evelopment of resilience in the supply chain - Requirements with guidance for use Price group U U TC :2010 TC : :2010 TC : : : : : : : : : : :2010 TC :2010 Technical product documentation * Technical product documentation Use of main documents Steel Continuously hot-rolled stainless steel Tolerances on dimensions and form Part 2: Wide strip and sheet/plate Non-destructive testing of steel tubes Automated ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for verification of hydraulic leak-tightness Aircraft and space vehicles Aerospace Nuts, anchor, self-locking, floating, self-aligning, two lug, with MJ threads, classifications: 900 MPa (at ambient temperature)/235 degrees C, 900 MPa (at ambient temperature)/315 degrees C and 900 MPa (at ambient temperature)/425 degrees C imensions * Aircraft Tubing tolerances Inch series * Space data and information transfer systems Encapsulation service * Space data and information transfer systems Tracking data message * Space data and information transfer systems XML formatted data unit (XFU) structure and construction rules * Space data and information transfer systems Reference architecture for space data systems * Space data and information transfer systems Attitude data messages * Space data and information transfer systems Space communications protocol specification (SCPS) Transport protocol (SCPS-TP) * Space data and information transfer systems Space link identifiers * Space systems General test requirements for launch vehicles * Space systems isposal of satellites operating at geosynchronous altitude Road vehicles * Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 11: Reverberation chamber 8721:2010 * Road vehicles Measurement techniques in impact tests Optical instrumentation TC : :2010 Tractors and machinery for agriculture and forestry Tractors for agriculture and forestry Safety Part 2: Narrow-track and small tractors Machinery for forestry Glazing and panel materials used in operator enclosures for protection against thrown sawteeth Test method and performance criteria B E N W V XB U XA L Q U L T C C Update, Supplement to Focus -- October

11 TC 27 Solid mineral fuels TC 45 Rubber and rubber products 29541:2010 TC : : :2010 /TS 23647:2010 TC 38 * Solid mineral fuels etermination of total carbon, hydrogen and nitrogen content Instrumental method Food products Food products etermination of the glycaemic index (GI) and recommendation for food classification * Spices Saffron (Crocus sativus L.) Part 2: Test methods Meat and meat products Enumeration of presumptive Pseudomonas spp. Vegetable fats and oils etermination of wax content by gas chromatography Textiles E J R H 6472:2010 Rubber compounding ingredients Symbols and abbreviated terms 18752:2006/ Amd 1:2010 * Rubber hoses and hose assemblies Wire- or textile-reinforced single-pressure types for hydraulic applications Specification Amendment :2010 Rubber, vulcanized or thermoplastic etermination of tear strength Part 1: Trouser, angle and crescent test pieces 48:2010 Rubber, vulcanized or thermoplastic etermination of hardness (hardness between 10 IRH and 100 IRH) 4647:2010 Rubber, vulcanized etermination of static adhesion to textile cord H-pull test J XZ G L G :2010 Textiles Assessment of the ignitability of bedding items Part 1: Ignition source: smouldering cigarette F 4649:2010 Rubber, vulcanized or thermoplastic etermination of abrasion resistance using a rotating cylindrical drum device K :2010 TC 43 Textiles Assessment of the ignitability of bedding items Part 2: Ignition source: match-flame equivalent Acoustics 3741:2010 * Acoustics etermination of sound power levels and sound energy levels of noise sources using sound pressure Precision methods for reverberation test rooms :2010 * Acoustics etermination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for small movable sources in reverberant fields Part 1: Comparison method for a hard-walled test room 3744:2010 * Acoustics etermination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially field over a reflecting plane 11201: : :2010 TC : :2010 Acoustics Noise emitted by machinery and equipment etermination of emission sound pressure levels at a work station and at other specified positions in an essentially field over a reflecting plane with negligible environmental corrections Acoustics Noise emitted by machinery and equipment etermination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections Acoustics Noise emitted by machinery and equipment etermination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections Welding and allied processes Welding consumables Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels Classification Welding consumables Solid wire electrodes, solid wires and rods for fusion welding of titanium and titanium alloys Classification F V R W Q S R K F : : : :2010 TC :2010 TC : :2010 TC 60 /TR :2009 TC : : :2010 Rubber, vulcanized etermination of temperature rise and resistance to fatigue in flexometer testing Part 1: Basic principles Rubber, vulcanized etermination of temperature rise and resistance to fatigue in flexometer testing Part 3: Compression flexometer (constantstrain type) Rubber, vulcanized or thermoplastic etermination of indentation hardness Part 1: urometer method (Shore hardness) Rubber, vulcanized or thermoplastic etermination of indentation hardness Part 2: IRH pocket meter method Gas cylinders Gas cylinders Fitting of valves to gas cylinders Buildings and civil engineering works Building construction Jointing products Part 1: etermination of extrudability of sealants Building construction Jointing products Part 2: etermination of extrudability of sealants using standardized apparatus Gears Code of inspection practice Part 6: Bevel gear measurement methods Plastics * Plastics Preparation of test specimens of thermoplastic materials using mouldless technologies Part 1: General principles, and laser sintering of test specimens Plastics Compression-moulded sheets of polyethylene (PE-UHMW, PE- H) Requirements and test methods * Plastics Epoxy resins Test methods 2558:2010 * Textile glass chopped-strand mats for reinforcement of plastics etermination of time of dissolution of the binder in styrene E H E C C R F E E B 10 Update, Supplement to Focus -- October 2010

12 TC : : :2010 TC :2010 /TS 28037:2010 TC :2010 TC : : :2010 TC :2010 TC : : : :2010 TC 92 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries * Petroleum, petrochemical and natural gas industries Materials selection and corrosion control for oil and gas production systems Petroleum and natural gas industries External coatings for buried or submerged pipelines used in pipeline transportation systems Part 5: External concrete coatings * Petroleum and natural gas industries Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock Technical delivery conditions Applications of statistical methods Guidelines for implementation of statistical process control (SPC) Part 2: Catalogue of tools and techniques * etermination and use of straight-line calibration functions Concrete, reinforced concrete and pre-stressed concrete * Testing of concrete Part 10: etermination of static modulus of elasticity in compression Transfusion, infusion and injection equipment for medical and pharmaceutical use Infusion equipment for medical use Part 4: Infusion sets for single use, gravity feed Injection equipment for medical use Part 1: Ampoules for injectables Injection equipment for medical use Part 2: One-point-cut (OPC) ampoules Light metals and their alloys Anodizing of aluminium and its alloys Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments Nuclear energy, nuclear technologies, and radiological protection Reference sources Calibration of surface contamination monitors Alpha-, beta- and photon emitters * Radiation protection Performance criteria for radiobioassay Nuclear energy Fuel technology Trunnions for packages used to transport radioactive material Nuclear technology Nuclear fuels Procedures for the measurement of elemental impurities in uraniumand plutonium-based materials by inductively coupled plasma mass spectrometry Fire safety R N X F V J E B E F S K L TC : :2010 TC : :2010 TC :2005/Amd 1: :2005/Amd 1:2010 TC : : :2010 TC :2010 TC :2007/Amd 1:2010 TC : :2010 TC :2010 entistry entistry enture adhesives entistry entifrices Requirements, test methods and marking Metallic and other inorganic coatings * Vitreous and porcelain enamels etermination of resistance to chemical corrosion Part 5: etermination of resistance to chemical corrosion in closed systems * Vitreous and porcelain enamels Glass-lined apparatus for process plants Part 4: Quality requirements for glass-lined flanged steel pipes and flanged steel fittings Mechanical vibration, shock and condition monitoring * Mechanical vibration and shock Characterization of the dynamic mechanical properties of visco-elastic materials Part 2: Resonance method Amendment 1 * Mechanical vibration and shock Characterization of the dynamic mechanical properties of visco-elastic materials Part 3: Cantilever shear beam method Amendment 1 Compressors and pneumatic tools, machines and equipment Hand-held non-electric power tools Safety requirements Part 3: rills and tappers Hand-held non-electric power tools Safety requirements Part 4: Nonrotary percussive power tools Hand-held non-electric power tools Safety requirements Part 6: Assembly power tools for threaded fasteners Powder metallurgy * Sintered metal materials etermination of the level of cleanliness of powder-metallurgy parts Anaesthetic and respiratory equipment Inhalational anaesthesia systems Part 3: Transfer and receiving systems of active anaesthetic gas scavenging systems Amendment 1 Earth-moving machinery Earth-moving machinery Performance requirements for non-metallic fuel tanks Earth-moving machinery Antitheft systems Classification and performance Fluid power systems Metallic tube connections for fluid power and general use Test methods for hydraulic fluid power connections H K F C XZ XZ N N P B XZ C C K 12863:2010 * Standard test method for assessing the ignition propensity of cigarettes K TC 104 Freight containers 17712:2010 Freight containers Mechanical seals P Update, Supplement to Focus -- October

13 TC 138 Plastics pipes, fittings and valves for the transport of fluids TC 178 Lifts, escalators and moving walks 13268: : :2010 TC :2003/ Amd 6:2010 TC :2010 TC :2010 TC :2010 TC :2007/Amd 1:2010 TC : : :2001/ Amd 1:2010 TC 173 IEC :2009/Cor 1:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage Thermoplastics shafts or risers for inspection chambers and manholes etermination of ring stiffness * Plastics pipes and fittings ecohesion test of polyethylene (PE) saddle fusion joints Evaluation of ductility of fusion joint interface by tear test * Plastics piping systems Polyolefin pipes and mechanical fitting assemblies Test method for the resistance to end load (AREL test) Graphical symbols Graphical symbols Safety colours and safety signs Safety signs used in workplaces and public areas Amendment 6 Air quality Workplace air etermination of metals and metalloids in airborne particulate matter by inductively coupled plasma mass spectrometry Water quality Water quality etermination of low-volatility lipophilic substances Gravimetric method Ergonomics Ergonomics Accessible design Auditory signals for consumer products Control and protective devices for gas and/or oil burners and appliances * Safety and control devices for gas and/ or oil burners and gas and/or oil appliances Particular requirements Part 1: Fuel/air ratio controls, electronic type Amendment 1: Addition to the specific regional requirements in Japan Optics and photonics Optics and photonics Preparation of drawings for optical elements and systems Part 8: Surface texture; roughness and waviness Optics and photonics Optical materials and components Characterization of optical materials used in the infrared spectral range from 0,78 µm to 25 µm Ophthalmic optics Contact lens care products Microbiological requirements and test methods for products and regimens for hygienic management of contact lenses Amendment 1 Assistive products for persons with disability * Medical electrical equipment Part 2-52: Particular requirements for the basic safety and essential performance of medical beds Technical Corrigendum 1 E E XZ Q XZ K F XZ /TS :2010 TC : :2010 TC :2010 /TS :2010 /TS :2010 /TS :2010 /TS :2010 /TS :2010 /TS :2010 /TS :2010 /TS :2010 /TS :2010 /TS :2010 /TS :2010 /TS :2010 * Safety requirements for lifts (elevators) Part 2: Safety parameters meeting the global essential safety requirements (GESRs) Copper, lead, zinc and nickel ores and concentrates * Copper, lead, zinc and nickel concentrates Guidelines for the inspection of mechanical sampling systems * Copper, lead, zinc and nickel concentrates Sampling of slurries Automation systems and integration integration Physical device control ata model for computerized numerical controllers Part 111: Tools for milling machines and exchange Part 439: AP239 product life cycle support and exchange Part 1001: Appearance assignment and exchange Part 1003: Curve appearance and exchange Part 1004: Elemental geometric shape and exchange Part 1005: Elemental topology and exchange Part 1006: Foundation representation and exchange Part 1007: General surface appearance and exchange Part 1009: Shape appearance layers and exchange Part 1016: Product categorization and exchange Part 1027: Contextual shape positioning and exchange Part 1032: Shape property assignment and exchange Part 1047: Activity Q K S L ZC 12 Update, Supplement to Focus -- October 2010

14 /TS :2010 and exchange Part 1050: imension tolerance /TS :2010 and exchange Part 1400: Product environment definition /TS :2010 and exchange Part 1051: Geometric tolerance /TS :2010 and exchange Part 1401: Product environment observed /TS :2010 and exchange Part 1068: Constructive solid geometry 3 /TS :2010 and exchange Part 1403: Geometric model relationship /TS :2010 and exchange Part 1115: Part collection /TS :2010 and exchange Part 1467: Risk management /TS :2010 and exchange Part 1132: Associative text /TS :2010 and exchange Part 1473: escription assignment /TS :2010 and exchange Part 1141: Requirement view definition /TS :2010 and exchange Part 1476: Analysis identification /TS :2010 and exchange Part 1164: Product as individual /TS :2010 and exchange Part 1484: System identification and version /TS :2010 /TS :2010 /TS :2010 /TS :2010 /TS :2010 /TS :2010 and exchange Part 1289: AP239 management resource information and exchange Part 1292: AP239 product definition information and exchange Part 1293: AP239 part definition information and exchange Part 1309: rawing definition and exchange Part 1310: raughting element and exchange Part 1312: raughting element specialisations /TS :2010 /TS :2010 /TS :2010 /TS :2010 /TS :2010 /TS :2010 and exchange Part 1485: System view definition and exchange Part 1488: Verification and validation and exchange Part 1514: Advanced boundary representation and exchange Part 1613: Physical unit non planar design view and exchange Part 1628: esign product data management and exchange Part 1634: Assembly component placement requirements /TS :2010 and exchange Part 1323: Basic geometric topology /TS :2010 and exchange Part 1646: Footprint definition /TS :2010 and exchange Part 1343: Product placement /TS :2010 and exchange Part 1651: Basic curve /TS :2010 and exchange Part 1345: Item definition structure /TS :2010 and exchange Part 1652: Basic geometry /TS :2010 and exchange Part 1348: Requirement management /TS :2010 and exchange Part 1654: Characteristic Update, Supplement to Focus -- October