High Speed Fine Pitch Connectors (MICTOR, MICTOR SB, Micro-Strip and STEP-Z Interconnection Systems)

Transcription

1 4 Need more information? all Technical Support at the numbers listed below. Technical Support is staffed with specialists well versed in all Tyco Electronics products. They can provide you with: Technical support atalogs Technical Documents Product Samples Tyco Electronics uthorized Distributor Locations For current tooling information, call the Tooling ssistance enter: Produced under a Quality Management System certified to ISO 9001 copy of the certificate is available upon request. Dimensioning: are in millimeters and inches unless specified otherwise. Values in brackets are equivalent U.S. customary units. Metric symbols used are: (elsius) Kg (Kilogram) N (newton) m (meter) mm (millimeter) mm 2 (square millimeter) Specifications subject to change. onsult Tyco Electronics for latest design applications. ISO 9001 ertified Table of ontents Signal Integrity Services: Taking SI to the Next Level High Speed Stacking onnectors (Parallel and Right-ngle oard-to-oard) Stacking Height Guide Introduction [.197] Receptacles [.591] Receptacles [.394] Plugs [.472] Plugs [.512] Plugs [.591] Plugs [.787] Plugs [.984] Plugs MITOR (0.64 [.025] enterline) Introduction onnector ross Section Material and Performance Specifications Stack Height ombinations Right-ngle (Straddle Mount) ombinations Vertical Plugs: 6.60 [.260] Stacking Height , Stacking Height , [.430] Stacking Height , [.495] Stacking Height , [.707] Stacking Height , [.738] Stacking Height [.788] Stacking Height , [.900] Stacking Height , 33 Right-ngle Plugs , 35 Vertical Receptacles , 37 Vertical Receptacles (Extended Height) , 39 Right-ngle Receptacles , 41 MITOR S Introduction Material and Performance Specifications Stack Height ombinations onnector ross Section [.032] enterline Receptacles [.032] enterline Plugs 5.00 [.197] Stacking Height [.315] Stacking Height [.433] Stacking Height [.551] Stacking Height [.630] Stacking Height [.748] Stacking Height [.866] Stacking Height [.984] Stacking Height [1.181] Stacking Height [.020] enterline Receptacles [.020] enterline Plugs 5.00 [.197] Stacking Height [.315] Stacking Height [.433] Stacking Height [.551] Stacking Height [.630] Stacking Height [.748] Stacking Height [.866] Stacking Height [.984] Stacking Height [1.181] Stacking Height Micro-Strip (1.27 x 2.54 [.050 x.100] enterline) Introduction Vertical Plugs: [.430] Stacking Height [.738] Stacking Height , 72 Vertical Receptacles Right-ngle Receptacles , 75 Extended Vertical Receptacles pplication Tooling for MITOR Right-ngle onnectors TION PIN Press-Fit ontacts , 79 pplication Tooling for Micro-Strip onnectors with TION PIN ontacts Technical Documents PREISION INTERONNET LUE RION oax ssemblies , 83 Part Number Index

2 Introduction to the Product Facts Excellent electrical performance for applications requiring 10+ Gb/s data rates Multipair differential cross talk less than 3% at 100 ps risetime for all stack heights Impedance specification of 100 ohms for Differential Pair configuration and 50 ohms for Single-Ended configuration Stack heights available ranging from [.590] to [1.378] High Speed position sizes ranging from to per connector SMT G attachment Dual beam signal contacts for high reliability Receptacle contacts fully protected with plastic cover Polarized housing design Packaging available for Trays or Tape & Reel High temperature housing plastic aps for use with vacuum pick & place equipment The connector is a grid array mezzanine connector specifically designed for high speed and high density applications up to 10+ gigabit per second data rates. Pin out patterns for either differential pair or single ended provide excellent isolation of high speed signals. Ground connections in close proximity to signal connections enable proper electrical coupling through the entire interconnect dramatically reducing crosstalk. The connector system maintains a 100 ohm impedance for differential applications and a 50 ohm impedance for singleended applications throughout the interconnect. all Grid rray attachment for both halves minimizes the performance degradation typically found with through hole connections and improves routing capability. Dual beam signal contacts provide for a highly reliable interface connection. The connector housing is polarized to ensure proper mating. 10 Gbps Reference Eye Pattern 20 mm Stack 10 Gbps Differential Eye Pattern 25 mm Stack 10 Gbps Differential Eye Pattern Mask mplitude was set to 25% (mv p-p) of the input signal and mask width was set to 40% (40 ps) of the input signal. 5

3 5.00 [.197] Receptacles Optional Pick-Up ap Position 1 1 ± 0.20 [.419 ±.008] 4.52 [.178] [1.126] Position T25 ontacts In These Rows re (ommoned) 24x 49x Stencil onnector Outline Onto oard Recommended P oard Layout Pos.* With Pick & Place ap SnPb Pb-free SnPb Pb-free SnPb Pb-free Tray packaged shown. ontact Tyco Electronics Engineering for Tape and Reel 6 Note: are RoHS compliant except: Indicates non-rohs compliant;

4 (ontinued) [.591] Receptacles Optional Pick-Up ap 2 ± 0.20 [.813 ±.008] [.572] Position [1.126] Position T37 ontacts In These Rows re (ommoned) 36x 73x Stencil onnector Outline Onto oard Recommended P oard Layout Pos.* With Pick & Place ap SnPb Pb-free SnPb Pb-free SnPb Pb-free Tray packaged shown. ontact Tyco Electronics Engineering for Tape and Reel Note: are RoHS compliant except: Indicates non-rohs compliant; 7

5 (ontinued) [.394] Plugs Position 1 Position T [1.126] Optional Pick-Up ap ± 0.25 [.431 ±.010] 9.65 ± 0.12 [.380 ±.005] ontacts In These Rows re (ommoned) 24x 49x Stencil onnector Outline Onto oard Recommended P oard Layout Pos.* With Pick & Place ap SnPb Pb-free SnPb Pb-free SnPb Pb-free Tray packaged shown. ontact Tyco Electronics Engineering for Tape and Reel 8 Note: are RoHS compliant except: Indicates non-rohs compliant;

6 (ontinued) 1 [.472] Plugs Position T37 Position [1.126] Optional Pick-Up ap ± 0.25 [.510 ±.010] ± 0.12 [.459 ±.005] ontacts In These Rows re (ommoned) 36x 73x Stencil onnector Outline Onto oard Recommended P oard Layout Pos.* With Pick & Place ap SnPb Pb-free SnPb Pb-free SnPb Pb-free Tray packaged shown. ontact Tyco Electronics Engineering for Tape and Reel Note: are RoHS compliant except: Indicates non-rohs compliant; 9

7 (ontinued) [.512] Plugs Position 1 Position T [1.126] Optional Pick-Up ap ± 0.25 [.549 ±.010] ± 0.12 [.498 ±.005] ontacts In These Rows re (ommoned) 24x 49x Stencil onnector Outline Onto oard Recommended P oard Layout Pos.* With Pick & Place ap SnPb Pb-free SnPb Pb-free SnPb Pb-free Tray packaged shown. ontact Tyco Electronics Engineering for Tape and Reel 10 Note: are RoHS compliant except: Indicates non-rohs compliant;

8 (ontinued) [.591] Plugs 0.42 [.017] Position T [.628] [.577] [1.126] Position 1 Ø ± 0.05 [.022 ±.002] Typ. Typ. Stencil onnector Outline Onto oard Recommended P oard Layout Pos.* With Pick & Place ap SnPb Pb-free SnPb Pb-free SnPb Pb-free Tray packaged shown. ontact Tyco Electronics Engineering for Tape and Reel Note: are RoHS compliant except: Indicates non-rohs compliant; 11

9 (ontinued) [.787] Plugs Position T37 Position [1.126] Optional Pick-Up ap ± 0.25 [.824 ±.010] ± 0.12 [.773 ±.005] ontacts In These Rows re (ommoned) 36x 73x Stencil onnector Outline Onto oard Recommended P oard Layout Pos.* With Pick & Place ap SnPb Pb-free SnPb Pb-free SnPb Pb-free Tray packaged shown. ontact Tyco Electronics Engineering for Tape and Reel 12 Note: are RoHS compliant except: Indicates non-rohs compliant;