FIRE PROTECTION & DETECTON

Transcription

1 Smoke Alarms - 01 Fire Sealants & Barriers - 05 Fire Extinguishers - 06 Fire Blankets - 06 CHAPTER

2 SMOKE ALARMS SMOKE ALARMS - TL SERIES SMOKE ALARMS SERIES TL series smoke alarms. Mains powered Alarms with year Rechargeable Lithium Battery. Smoke alarms. Photoelectric or Ionisation available. Mains power with battery backup. Battery type: Alkaline Technology Battery type BKSEIPFSITL Ionisation Lithium BKSEIPFSPTLH Photoelectric Lithium Technology BKSEIB141 Ionisation / 9 V BKSEIB146 Photoelectric / 9 V SMOKE ALARM RADIOLINK BASE - TL SERIES RadioLINK base for wireless interconnection - TL series. Stand-alone unit designed for use with RadioLINK bases and accessories. Visual RF transmission and power indicators. Mains powered with built-in rechargeable Lithium back-up. SMOKE ALARM RELAY BASE SERIES Mains powered relay base for 140 series. Contains a set of relay contacts that are switched on receipt of an alarm interconnect signal. Relay contacts are isolated and are rated at, 5A resistive, and can be used for signaling, turning on lights and sirens or activating door release devices, etc. BKSEIB420RF BKSEIB128 SMOKE ALARM SURFACE MOUNT RELAY BASE - TL SERIES SMOKE ALARM SURFACE MOUNT BASE SERIES Surface mount relay base for TL series. The BA158 Relay Base has an integral relay that is activated when the Smoke/Heat Alarm connected to the BA158 enters alarm mode. Surface mount base. Designed to facilitate installation of bulky wiring and conduits. Suitable for EIB141, EIB144 and EIB146 alarms. Current BKSBA158 A BKSEIB127 Base SMOKE ALARM SURFACE MOUNT BASE - TL SERIES SMOKE ALARM RADIOLINK BASE SERIES Surface mount base for TL series. Designed to facilitate installation of bulky wiring and conduits. To be used in conjunction with EIPFSITL, EIPFSPTLH, EIPFSTTL smoke and heat alarms. RadioLINK base for wireless interconnection of 140 Series alarms. Connects EIB141, EIB146 and EIB144 alarms. BKSEIB168RF BKSEIB157T Base SMOKE ALARM - 9V BATTERY POWERED SMOKE ALARM RELAY BASE SERIES The EIPFS0TY is an Ionisation Alarm that runs on a 9 Volt year lithium battery. Mains powered base with relay and battery backup. For EIB141, EIB144 and EIB146 alarms only. Technology Battery type BKSEIPFS0TY Ionisation 9 V Lithium BKSEIB128RBU NATIONAL CUSTOMER SERVICE

3 SMOKE ALARMS SERIES Smoke alarms. VIBRALARM RADIOLINK ALARM SYSTEM - STROBE LIGHT/VIBRATION PAD Vibralarm for the deaf and hard of hearing, with RadioLINK to suite smoke and heat alarm with vibrating pad. For use with RF smoke alarms or 140 series alarms fitted with BKSEIB168RF. Technology: Photoelectric Battery type BKSEIB605C 9 V Alkaline With interconnect capability BKSEIB605CRF 9 V Alkaline With RF module for interconnect BKSEIB605TYC 9 V year Lithium With wired and optional RF interconnect BKSEIB605TYCRF 9 V year Lithium Interconnect with RF module BKSEIB170RF RADIOLINK ALARM CONTROLLER SMOKE ALARM RADIOLINK WIRELESS MODULES SERIES year battery powered Smoke alarm controller. RF radiolink wireless modules. For smoke and heat alarms. Suitable for: RadioLINK enabled Fire & Carbon Monoxide (CO) Alarms Battery type BKSEIB605MRF 9 V Alkaline BKSEIB605MTYRF 9 V year lithium BKSEIB450 SMOKE ALARM CONTROLLER Test/Locate/Silence/Memory SMOKE ALARM STROBE UNIT Smoke alarm controller. The EIB171RF is a RadioLINK alarm designed to give warning to the deaf and hard of hearing. It consists of a strobe unit, and runs on 230V AC Mains power with a built in long-life sealed Lead-acid rechargeable battery. It is designed for daytime rooms as a visual indicator. Suitable for: Brooks smoke/heat alarms BKSEIB171RF BKSBAATLS Test/Locate/Silence VIBRALARM WITH RECHARGEABLE BATTERY BACK-UP SMOKE ALARMS SERIES Surface mounted smoke detectors. Vibralarm for the deaf and hard of hearing, contains control panel and vibrating pad to use with the TL series. BKSEIB173P Technology CLI755SMA Ionisation 9 V / 230 V CLI755PSMA Photoelectric 9 V / 230 V - 2 NATIONAL CUSTOMER SERVICE

4 SMOKE ALARMS FLUSH SERIES Flush mounted smoke detectors. Battery backup. SMOKE ALARM REMOTE TEST & HUSH CARDS - LIF5 SERIES Remote test and hush card/set. Compatible to LIF5 series smoke alarms except LIF800RF. Technology CLI755FM Ionisation 9 V / 230 V CLI755PFM Photoelectric 9 V / 230 V LIFLIFTHC LIFLIFTHP/C Test & hush card Test & hush plate & 1 x card SMOKE ALARMS SERIES Smoke alarms. Battery only or Mains/battery available. SMOKE ALARM - HG00 SERIES Smoke alarm, Mains power and battery backup. Technology HPMD645/2 Ionisation 9 V HPM645/3 Ionisation 9 V / 230 V Technology LIFHG00 Ionisation 240 / 9 V SMOKE ALARMS - LIF5 SERIES Surface mounted smoke detectors. SMOKE ALARM - YI SERIES Long life smoke alarm. Surface mounted with LED indicator. Technology Battery type LIFLIF5000 Ionisation 240 / 9 V Alkaline LIFLIF5800 Photoelectric 240 / 9 V Alkaline LIFLIF5800RL Photoelectric 240 / 9 V Sealed rechargeable lithium SMOKE ALARM - LIF5 FLUSH SERIES Technology Battery type LIFYI Ionisation 9 V year lithium SMOKE ALARM - LIFPE9 SERIES Surface mounted smoke detectors. The PSA Lifesaver 5800RF is a low profile AC/DC. This advanced smoke alarm has the ability to function as a stand alone unit or in an interconnected system. The PSA Lifesaver 5800RF is compatible with other PSA Lifesaver smoke alarms, heat alarm, visual strobe light and ancillary devices. Technology LIFLIFPE9M Photoelectric 9 V Technology Battery type LIF5800RF Photoelectric 240 / 9 V Sealed rechargeable lithium SMOKE ALARM MOUNTING BASE Mounting base for Lifesaver smoke detectors. White in colour. LIFLIFMB3848 Base NATIONAL CUSTOMER SERVICE

5 SMOKE ALARM ISOLATION RELAY HEAT ALARM - TL SERIES Isolation relay. Suitable for connection to auxiliary devices, security alarm panels and fire indication panels. Heat/thermal mains powered alarm - TL series. Comes with built in year rechargeable lithium cells. Temperature Min: 54 C Temperature Max: 62 C LIFLIFRKA/9 /30VDC Technology Battery type BKSEIPFSTTL Heat/thermal Lithium SMOKE ALARM STROBE LIGHT Strobe light for hearing impaired. Must be operated by a compatible 240V smoke or heat alarm. Bright 177 candela strobe light. HEAT ALARM - HA240 SERIES Surface mounted heat detector. White in colour. LIFLIFSL V Temperature Min: 58 C Temperature Max: 88 C SMOKE ALARM - SD4 SERIES LIFLIFHA V An Interconnectable Battery Back-up Smoke Alarm white in colour. Technology REPSD4 Ionisation 9 V / 230 V HEAT ALARM SURFACE MOUNTING BLOCK - HA240 SERIES Designed for surface mounting smoke alarms on concrete slabs. Multiple conduit or duct entry. Multiple fixing holes for quick installation. SMOMB1237 to suit Lifesaver Heat Alarm (LIFHA240) and Lifesaver Visual Signalling Device (LIFSL240). Compatible with lifesaver Smoke Alarms (LIF4800RL, LIF5000 series). HEAT ALARMS SERIES LIFSMOMB1237 Diameter 125 mm Heat/thermal alarms available with interconnect. HEAT ALARMS ADDRESSABLE Battery type BKSEIB603C 9 V Alkaline With Interconnect capability BKSEIB603TYC 9 V year lithium With wired and optional RF interconnect BKSEIB603TYCRF 9 V year lithium Interconnect with RF module HEAT ALARM SERIES Low profile design, Fixed temperature (63 C). 2-wire SLC connection. Low standby current. Rotary switch addressing (1-99). Dual LED for 360 viewing. Ability to be remotely tested at panel. Built-in test switch by use of an external magnet Tamper resistant. Optional relay, isolator and sounder bases available. Approved to CSIRO and AS Requires B501 base (not included with detector). Diameter LIFPSAFST851R 24 V 4 mm Rate of rise LIFPSAFST V 4 mm Fixed FIRE ALARM MULTI SENSOR Heat/thermal alarm, mains powered with battery backup. Technology BKSEIB144 Heat/thermal / 9 V Multi sensor. Photoelectric and heat sensor. Certified to AS and AS Tamper-proof battery back-up. Low power cell warning. Unique dust compensation. Battery type BKSEIB21 Lithium - 4 NATIONAL CUSTOMER SERVICE

6 CARBON MONOXIDE ALARM SMOKE ALARM TEST SPRAY Testing spray for smoke detectors. Aerosol can. Carbon monoxide mains powered alarm with year rechargeable lithium battery back-up. Battery type BKSEI261EN Lithium CARBON MONOXIDE ALARMS - EI207 SERIES Carbon monoxide alarms. Indication Battery type BKSEI207 LED 2 x AAA batteries BKSEI207D LED/LCD 2 x AAA batteries CARBON MONOXIDE ALARMS - EI208 SERIES Carbon monoxide alarms. LIFLIFLT711 FIRE SEALANTS & BARRIERS FIRE-RETARDANT & ELECTRIC ARC PROOFING TAPE 77 FIRE BARRIER WRAP/STRIP Volume 0 ml Scotch premium non-adhesive tape designed to protect most types of electrical cables when exposed to failures in an adjacent cable. Its specially formulated material expands in fire to form a thick char build up between the flame and the cable. The resulting firewall acts as a heat shield and flame barrier, thus protecting the wrapped cables and accessories. Colour Width Length Thickness 3ME7738X6.1MBK Black 38 mm 6.2 m 0.76 mm 3M Fire Barrier is one-part, organic/ inorganic, fire resistive elastomeric sheet with aluminum foil on one side. It is available in convenient strips which are quickly and easily installed. FS-195+ is designed to firestop penetrations in fire-rated walls and floor-ceiling assemblies. Indication Battery type BKSEI208DW Optional RadioLINK upgrade LED/LCD Lithium BKSEI208W Optional RadioLINK upgrade LED Lithium BKSEI208DWRF RadioLINK module fitted LED/LCD Lithium BKSEI208WRF RadioLINK module fitted LED Lithium CARBON MONOXIDE ALARM RADIOLINK MODULE Colour Width 3MSSCOFS-195 Red/brown 2 in FIRE BARRIER STRIP Intumescent wraps/strips used to firestop pipe and cable penetrations through fire-rated construction. BKSEI200RF RadioLINK modules for carbon monoxide alarms. Suitable for Ei207/Ei208 series alarms Colour Length Width Fire rating 3MSSCOGS-STRIP Silver 12 m 2 in 4 h FIRE BARRIER COLLARS CARBON MONOXIDE ALARM - LIFC09 SERIES LIFCO9 Carbon monoxide alarm.this alarm protects against the dangers of deadly carbon monoxide levels in the home and provides continuous monitoring of CO levels. It can be installed on a wall or as a tabletop unit for added convenience. The PSA Lifesaver LIFCO9 battery operated carbon monoxide alarms are easy to install units that provide reliable protection against the dangers of carbon monoxide. Suitable for all living areas. They have a 7-year sensor life, providing up to 40% longer protection than many other CO alarms currently available. Battery type 3 x AA Fire protection restricting collars. Expands when heated to seal. Colour Width 3MSSCORC-1-1 Red/brown 1 in 3MSSCORC-1-2 Red/brown 2 in NATIONAL CUSTOMER SERVICE

7 FIRE BARRIER PILLOWS FIRE BARRIER SILICONE Fire barrier pillows. 18% volume expansion when heated. Fire barrier silicone. Various types and volumes available. Expansion begins: 200 C Colour Length Width Height 3MSSCO249 Red 2 in 9 in 4 in 3MSSCO269 Red 2 in 9 in 6 in 3MSSCO369 Red 3 in 9 in 6 in FIRE BARRIER SHEET Composite sheet fire barrier. Fire rating Volume 3MSSCO2000 Silicone sealant (2000+) 4 h 300 ml 3MSSCO00 Silicone sealant (non slump) 4 h 300 ml 3MSSCOCP25WB-0.3 Silicone sealant (non slump) 4 h 3 ml 3MSSCOCP25WB-7.6 Silicone sealant (non slump) 4 h 7.6 L 3MSSCOCP25WB-19 Silicone sealant (non slump) 4 h 19 L 3MSSCO03 Silicone sealant (self leveling) 4 h 300 ml FIRE SEALANT Prevents the spread of flames, smoke and gases through walls and floors or between building compartments. Provides excellent adhesion to concrete, concrete block, plasterboard, fibre cement and brickwork. Colour Fire rating 3MSCS-195 Silver 4 h FIRE BARRIER FOAM A two-part, liquid-silicone elastomer that foams in place when mixed. Firestops and seals large and complex penetrations. Cures in 1-5 minutes to form an elastomeric compression seal. No ampacity derating of cables when used properly. Weight Colour RAMBLBRGYC 480 g Grey RAMBLBRGYS 900 g Grey FIRE EXTINGUISHERS FIRE EXTINGUISHERS Fire extinguishers Dry powder. Manufactured to Australian Standards. Fire rating 3MSSCORTVF Fire barrier RTV foam 3 h 3MSSCORTVF-AB Fire barrier parts A and B 3 h Suitable for: Class A,B,E fires Material: Steel FIRE BARRIER MORTAR Fire barrier mortar. Pumpable, self-bonding and have excellent adhesion properties. LIFLIFFX0 LIFLIF25ABE LIFLIF45ABE LIFLIF90ABE Weight 1 kg 2.5 kg 4.5 kg 9 kg 3MSSCOFB-MORTAR Weight 20 kg FIRE BLANKETS FIRE BLANKETS Fire blankets made to Australian Standard AS3504. FIRE BARRIER PUTTY Fire barrier putty for filling gaps around cables and conduits. Expands when heated (begins at 7 C) to choke and seal. Mouldable. Material: Woven glass fibre Colour Fire rating Length Width 3MSSCOMPP-4S Red 4 h 178 mm 178 mm Fire protection putty pad 3MSSCOMPS-2 Red 4 h 279 mm 41 mm Fire protection putty stick Width Length LIFLIFFB00 1 m 1 m LIFLIFFB m 1.8 m - 6 NATIONAL CUSTOMER SERVICE

8 We are more than a wholesaler we are the complete solution Our brands Three easy ways to order ONLINE BY PHONE IN PERSON Feedback? We value your opinion, if you have any comments, please us at marketing@rexelha.com.au We prepared this catalogue using literature from manufacturers, and although we have taken every care, the technical information, product illustrations, technical charts and images are non-binding. Rexel Electrical Supplies is not liable for any typographical errors, which have may occurred during the production of this catalogue. This Catalogue is printed on paper manufactured under an ISO 9001 accredited Environmental Management System and is Elemental Chlorine Free (ECF). The balance of fibres are sourced under a Chain Of Custody programme from controlled sources.

9 AUDIO VISUAL BATTERIES & TORCHES CABLE CABLE MANAGEMENT CONDUIT & DUCTING CONTROL & INDICATION DATA & COMMUNICATIONS ELECTRICAL APPLIANCES ENERGY MANAGEMENT FIRE PROTECTION & DETECTION HARDWARE HAZARDOUS AREA EQUIPMENT HEATING VENTILATION & AIR CONDITIONING LABELLING & MARKING LAMPS & TUBES LIGHT FITTINGS PERSONAL PROTECTION EQUIPMENT POWER DISTRIBUTION SECURITY & AUTOMATION SIGHT & SOUND SOLAR ENERGY SWITCHES & SOCKET OUTLETS TEST & MEASUREMENT TOOLS WIRING ACCESSORIES ISBN: INDEX Catalogue Order Code: RHACAT2