REVEALS + MOLDINGS REVEALS + MOLDINGS PRODUCT BROCHURE ENGINEERED PRODUCT SYSTEMS

Transcription

1 S + MOLDINGS S + MOLDINGS ENGINEERED PRODUCT SYSTEMS PRODUCT BROCHURE

2 ARCHITECTURAL METALS / S + MOLDINGS CONTENTS D Reveals & Moldings DA S DA.1 DA.2 DA.3 Reveal F Reveal Snap-In Reveal DD CORNERS DD.1 Stepped Outside Corner / Corner Reveal DD.2 Multiple Stepped Outside Corner DA.4 Z Reveal DD.3 Beveled Corner DA.5 Reveal Base DD.4 Curved Inside Corner DA.6 Step Trim DD.5 Curved Outside Corner DA.7 V Reveal DA.6 Bullnose DA.8 Reverse V Reveal DA.9 DA.10 DA.11 W Reveal Reveal/Picture Hanger Reveal Channel Screed/Plaster and Stucco Control Joint COLUMN COLLARS + RINGS DE.1 DE.2 DE.3 Column Collar Reveal Column Ring Wall Angle Column Ring DA.12 F Reveal DA.13 DA.14 DA.15 T Molding X Molding W Molding DF ACOUSTICAL DF.1 DF.2 DF.3 W Reveal Molding /Acoustical Reveal Acoustical Ceiling Trim DF.4 Acoustical Molding DB DB.1 Expansion Joint DF.5 DF.6 W Acoustical Reveal F Acoustical Reveal EXPANSION JOINTS DF.7 J Acoustical Trim DG DG.1 Special Sections DC TRIMS DC.1 DC.2 DC.3 DC.4 DC.5 DC.6 Corner Trim L Trim Molding Edge Trim Edge Trim Radius Corner Trim Pocket Trim SPECIAL SECTIONS DH GLAZING TRACK DG.2 Contemporary Reveal DH.1 Glazing Track / Ceiling Track DH.2 Acoustical Ceiling Tract / Acoustical Ceiling DC.7 J Molding DC.8 DC.9 DC.10 DC.11 Molding End Closure Top Track Ceiling Trim Protruding Edge DI INTEGRATED FUNCTION DI.1 Reveal Rail Chartrail Insert Hook Insert DC.12 DC / 45 Angle Trim Wall Angle DJ INSTALLATION DJ.1 DJ.2 DJ.3 Installation Guide Installation Guide Installation Guide DJ.4 Venting Information S & MOLDINGS BROCHURE 3

3 SHAPE FINDER INDEX D Moldings GUIDE SPECIFICATION Where indicated on drawings, Fry Reglet reveals and moldings, as manufactured by Fry Reglet Corporation, shall be installed. Fry Reglet aluminum reveals and moldings shall be extruded alloy 6063 T5, with chemical conversion coating, primed finish, clear anodized or other specified finish. Refer to finish section. DA.1 DA.2 DA.3 DA.4 DA.5 F SNAP-IN Z BASE DA.6 DA.7 DA.8 DA.9 DA.10 STEP TRIM V REVERSE V W / PICTURE HANGER DA.11 DA.12 DA.13 DA.14 DA.15 CHANNEL SCREED/ PLASTER AND STUCCO CONTROL JOINT F T MOLDING X MOLDING W MOLDING DB.1 DC.1 DC.2 DC.3 DC.4 DRYWALL EXPANSION JOINT CORNER TRIM L TRIM MOLDING EDGE TRIM EDGE TRIM DC.5 DC.6 DC.7 DC.8 DC.9 RADIUS CORNER TRIM POCKET TRIM J MOLDING DRYWALL MOLDING END CLOSURE TOP TRACK 4 S & MOLDINGS BROCHURE

4 ARCHITECTURAL METALS / S + MOLDINGS SHAPE FINDER INDEX D Moldings DC.10 DC.11 DC.12 DC.13 DD.1 CEILING TRIM PROTRUDING EDGE 30 / 45 ANGLE TRIM WALL ANGLE TRIM STEPPED OUTSIDE CORNER DD.2 DD.3 DD.4 DD.5 DD.6 BEVELED CORNER MULTIPLE STEPPED OUTSIDE CORNER CURVED INSIDE CORNER CURVED OUTSIDE CORNER BULLNOSE DE.1 DE.2 DE.3 DF.1 DF.2 COLUMN COLLAR COLUMN RING WALL ANGLE COLUMN RING W MOLDING DRYWALL - ACOUSTICAL DF.3 DF.4 DF.5 DF.6 DF.7 ACOUSTICAL CEILING TRIM ACOUSTICAL MOLDING W ACOUSTICAL F ACOUSTICAL F ACOUSTICAL TRIM DG.1 DG.2 DH.1 DH.2 DI.1 SPECIAL SECTIONS CONTEMPORARY GLAZING TRACK ACOUSTICAL CEILING TRACK INTEGRATED FUNCTION S & MOLDINGS BROCHURE 5

5 DA.1 DEPTH DIM. B NON-VENTED VENTED 1/ 4" 1 / 4" DRM / 2" 1 / 8" DRM / 2" 1 / 4" DRM / 2" 3 / 8" DRM / 2" 1 / 2" DRM DRM-50-V-50 1/ 2" 5 / 8" DRM DRM-50-V-625 1/ 2" 3 / 4" DRM DRM-50-V-75 1/ 2" 1" DRM DRM-50-V-100 1/ 2" 1 1 / 2" DRM DRM-50-V-150 1/ 2" 2" DRM DRM-50-V-200 1/ 2" 2 1 / 2" DRM DRM-50-V-250 1/ 2" 3" DRM DRM-50-V-300 1/ 2" 4" DRM DRM-50-V-400 5/ 8" 1 / 4" DRM / 8" 3 / 8" DRM / 8" 1 / 2" DRM DRM-625-V-50 5 /8" 5/ 8" DRM DRM-625-V-625 5/ 8" 3 /4" DRM DRM-625-V-75 5/ 8" 1" DRM DRM-625-V-100 5/ 8" 1 1 / 4" DRM DRM-625-V / 8" 1 1 / 2" DRM DRM-625-V-150 5/ 8" 2" DRM DRM-625-V /8" 2 1 / 2" DRM DRM-625-V-250 5/ 8" 3" DRM DRM-625-V-300 5/ 8" 4" DRM DRM-625-V-400 5/ 8" 6" DRM DRM-625-V S & MOLDINGS BROCHURE

6 ARCHITECTURAL METALS / S + MOLDINGS DA.2 F DEPTH DIM. B NON-VENTED VENTED 1/ 8 " DRMF / 4 " DRMF / 8 " DRMF DRMF DRMF-50-V-50 DRMF DRMF-50-V-625 Ceiling 3/ 4 " DRMF DRMF-50-V-75 1" DRMF DRMF-50-V-100 Tape & Joint Compound 3/ 8 " DRMF DRMF DRMF-625-V-50 DRMF DRMF-625-V-625 3/ 4 " DRMF DRMF-625-V-75 1" DRMF DRMF-625-V / 2" DRMF DRMF-625-V-150 2" DRMF DRMF-625-V-200 3" DRMF DRMF-625-V-300 DA.3 SNAP-IN 3/ 8 * DRM-SNAP-lN-375 1/ 2 ** DRM-SNAP-lN-50 5/ 8 *** DRM-SNAP-lN-625 *Snap-In fits following profiles: DRM-50-50, DRM , DRMF-50-50, DRMF **Snap-In fits following profiles: DRM , DRM , DRMF , DRMF ***Snap-In fits following profiles: DRM-50-75, DRM , DRMF-50-75, DRMF Snap-in Reveal INSTALLER NOTE: Trim edge of wall covering to opening of reveal, as shown. Do not wrap wall covering into opening of reveal molding. Tape & Joint Compound S & MOLDINGS BROCHURE 7

7 DA.4 Z DEPTH DIM. B NON-VENTED VENTED Door Jamb 1/ 4 " 1/ 4 " DRMZ / 8 " DRMZ / 4 " DRMZ / 8 " DRMZ "Z" Reveal DRMZ DRMZ-50-V-50 DRMZ DRMZ-50-V-625 3/ 4 " DRMZ DRMZ-50-V-75 1" DRMZ DRMZ-50-V / 2" DRMZ DRMZ-50-V-150 2" DRMZ DRMZ-50-V-200 5/ 8 1 / 4 DRMZ / 8 3 / 8 " DRMZ / 8 1 / 2" DRMZ DRMZ-625-V-50 5/ 8 5 / 8 DRMZ DRMZ-625-V-625 5/ 8 3 / 4 " DRMZ DRMZ-625-V-75 5/ 8 1 DRMZ DRMZ-625-V-100 5/ / 4" DRMZ DRMZ-625-V / 8 2" DRMZ DRMZ-625-V-200 1" 1" DRMZ DRMZ-100-V-100 Tape & Joint Compound 8 S & MOLDINGS BROCHURE

8 ARCHITECTURAL METALS / S + MOLDINGS DA.5 BASE DEPTH DIM. B HEIGHT 4" DRMB / 2 " DRMB " DRMB " DRMB " DRMB Reveal Base Tape & Joint Compound Floor DA.6 STEP TRIM STEP SIZE DMST DMST Tape & Joint Compound Step Trim S & MOLDINGS BROCHURE 9

9 DA.7 "V" DIM. B DEPTH 1/ 4" 1 / 4" DRMV-25 3/ 4" 1 / 2" DRMV-75 Tape & Joint Compound 1 " 1/ 2" DRMV-100 DA.8 REVERSE V MOLDING 1 " DRMVR-100 Tape & Joint Compound 1/2" Reverse "V" Reveal Molding 10 S & MOLDINGS BROCHURE

10 ARCHITECTURAL METALS / S + MOLDINGS DA.9 W DEPTH DIM. B 3/ 4 " DRWT / 4 " DRWT " 2" DRWT Ceiling "W" Reveal Tape & Joint Compound DA.10 / PICTURE HANGER 3/ 4 " DRMH-50 *Hanger clips (DRMH-50 insert) sold separately. Note: Maximum capacity per hanger clip is 75 pounds. Not to exceed 4 clips per 10ft. peice Reveal / Picture Hanger Tape & Joint Compound S & MOLDINGS BROCHURE 11

11 DA.11 CHANNEL SCREED/PLASTER AND STUCCO CONTROL JOINT DEPTH DIM. B DEPTH NON-VENTED VENTED DCS DCS-50-V-50 3/ 4 " DCS DCS-50-V-75 1" DCS DCS-50-V / 2 " DCS DCS-50-V-150 2" DCS DCS-50-V-200 3" DCS DCS-50-V-300 4" DCS DCS-50-V-400 1/ 2" DCS DCS-625-V-50 3/ 4 " DCS DCS-625-V-75 1" DCS DCS-625-V / 2" DCS DCS-625-V-150 2" DCS DCS-625-V / 2" DCS DCS-625-V-250 3" DCS DCS-625-V-300 4" DCS DCS-625-V-400 6" DCS DCS-625-V-600 Reveal Channel Screed DA.12 F DEPTH DIM. B NON-VENTED VENTED Ceiling 3/ 4 " FDM FDM-50-V-75 1/ 2" FDM FDM-625-V-50 3/ 4 " FDM FDM-625-V-75 "F" Reveal 1" FDM FDM-625-V / 2" FDM FDM-625-V / 2" FDM FDM-625-V-250 3" FDM FDM-625-V S & MOLDINGS BROCHURE

12 ARCHITECTURAL METALS / S + MOLDINGS DA.13 T MOLDING DEPTH DIM. B NON-VENTED VENTED TDM TDM-50-V-50 3/ 4 " TDM TDM-50-V / 8" TDM TDM-50-V / 2 " TDM TDM-50-V-150 1/ 2" TDM TDM-625-V-50 3/ 4" TDM TDM-625-V-75 DIM. B 1 1 / 8" TDM TDM-625-V-1125 DIM.A DA.14 X MOLDING DIM A. XDM XDM S & MOLDINGS BROCHURE 13

13 DA.15 W MOLDING DEPTH 3/ 4 " DIM. B DIM. C DEPTH NON-VENTED VENTED WDM / 4 " 1" WDM WDM-50-V-75 3/ 4 " 1" WDM WDM-625-V-75 3/ 4 " WRM WRM-75-V DIM.C "W" Molding DIM.B Ceiling DIM.A 3/4" DB.1 DRYWALL EXPANSION JOINT GROUND 2-PIECE 3-PIECE 1/ 4 " DRM PC DRM PC DRM PC 3/ 4 " DRM PC DRM PC 1" DRM PC 1 1 / 2 " DRM PC DRM PC 2-PIECE ONE COMPRESSION SEAL Tape & Joint Compound 3-PIECE TWO COMPRESSION SEALS Tape & Joint Compound Compression Seal 2-Piece Expansion Joint Compression Seal 3-Piece Expansion Joint 14 S & MOLDINGS BROCHURE

14 ARCHITECTURAL METALS / S + MOLDINGS DC.1 CORNER TRIM DIM A. EXPOSED CORNER 3/ 8 " DMCT / 4" DMCT-1250 Corner Trim DIM.A DC.2 L TRIM MOLDING TRIM DEPTH DRML-50 DRML-625 "L" Trim Molding 3/ 4 " DRML-75 1" DRML / 4" DRML-1250 DIM.A 1 1 / 2" DRML / 8" DRML-1625 Tape & Joint Compound 2" DRML / 2" DRML-250 3" DRML-300 S & MOLDINGS BROCHURE 15

15 DC.3 EDGE TRIM DIM A. TRIM DEPTH DMET-50 1" DMET / 2" DMET-150 Additional layer of 1 / 2 " drywall Two additional layers of 1 / 2 " drywall Three additional layers of 1 / 2 " drywall DMET-100, DMET-150 DMET /16" Edge Trim DIM.A 1/2" 1/4" Tape & Joint Compound DC.4 EDGE TRIM DIM A. TRIM DEPTH DRME-50 5/ 8" DRME / 4" DRME-1250 Additional layer of 1 / 2 " drywall Two additional layers of 5 / 8 " drywall Edge Trim DIM.A Tape & Joint Compound 16 S & MOLDINGS BROCHURE

16 ARCHITECTURAL METALS / S + MOLDINGS DC.5 RADIUS CORNER TRIM DIM A. RCT-50 1/2" RADIUS 0.625" Radius Corner Trim DIM A. DC.6 POCKET TRIM OF TILE SUPPORT 3/ 4 " DMPT-75 Ceiling Tile 3/4" 3/4" Pocket Trim Tape & Joint Compound S & MOLDINGS BROCHURE 17

17 DC.7 "J" MOLDING DIM A. DIM B. DIM C. 3/ 16 " 1 1 / 16" JDM / 4" JDM / 16 " 1 1 / 16" JDM-625 DIM B. DIM C DIM A. "J" Molding DC.8 DRYWALL MOLDING END CLOSURE * 2" DMEC / 2 DMEC / 4 DMEC / 8 DMEC / 8 DMEC / 4 DMEC-7250 DIM A. Molding End Closure Tape & Joint Compound 18 S & MOLDINGS BROCHURE

18 ARCHITECTURAL METALS / S + MOLDINGS DC.9 TOP TRACK DEPTH DRYWALL THICKNESS) STUD Screw Slot Grid 3 5 / 8 " DMTT Acoustical Ceiling Top Track 5/8" DIM A. 5 /8" Tape & Joint Compound DC.10 CEILING TRIM DIM. B DRMCT / 4 " DRMCT " DRMCT DIM.B Ceiling Trim Tape & Joint Compound DIM A. Tape & Joint Compound S & MOLDINGS BROCHURE 19

19 DC.11 PROTRUDING EDGE PROFILES DIM. B 3/ 8 " N/A DRMPET-375 DRMPET-375 1" N/A DRMPET-100 1" 3/ 4 " DRMPWR " 1" DRMPCR Tape & Joint Compound DRMPET-100 Tape & Joint Compound DRMPWR Tape & Joint Compound Tape & Joint Compound DRMPCR Tape & Joint Compound Tape & Joint Compound 20 S & MOLDINGS BROCHURE

20 ARCHITECTURAL METALS / S + MOLDINGS 30 / 45 ANGLE TRIM DC.12 DIM A DIM B / 8 " DMAT / 8 " DMAT Blocking as required Angle Trim DIM.A DIM.B 5" DC.13 CROSS SECTION / INSTALLATION DETAIL WALL ANGLE DIM A DIM B 3/4" 1" WA " 2" WA DIM A Acoustical Ceiling DIM B Wall Angle S & MOLDINGS BROCHURE 21

21 STEPPED OUTSIDE CORNER DD.1 DRYWALL CORNER NOTCH DIM. B NOTCH HEIGHT DIM.A Tape & Joint Compound DRMW / 2 " DRMW DRMW / 2 " 1 1 / 2 " DRMW Stepped Outside Corner DIM.B MULTIPLE STEPPED OUTSIDE CORNER DD.2 DMOS / 2 " DMOS-150 DIM.A DIM.A Multiple Stepped Outside Corner DIM.A Tape & Joint Compound 22 S & MOLDINGS BROCHURE

22 ARCHITECTURAL METALS / S + MOLDINGS DD.3 BEVELED CORNER BEVEL Beveled Corner 3/ 4 " DMBC-75 3/4" Tape & Joint Compound DD.4 CURVED INSIDE CORNER R RADIUS DIM A 3/ 4 " 1 1 / 4 " DRMC-IS-75 1" 1 9 / 16 " DRMC-IS / 2 " 2 5 / 16 " DRMC-IS-150 2" 2 7 / 8 " DRMC-IS-200 3" 4 1 / 4 " DRMC-IS-300 Curved Inside Corner 4" 5 5 / 8 " DRMC-IS-400 6" 8 7 / 16 " DRMC-IS-600 DIM A R 90 o S & MOLDINGS BROCHURE 23

23 DD.5 CURVED OUTSIDE CORNER R RADIUS DIM A 1 " DRMC-OS-625 3/ 4 " 1 " DRMC-OS-75 Curved Outside Corner 1" 1 3 / 8 " DRMC-OS / 2 " 2 1 / 8 " DRMC-OS-150 2" 2 3 / 4 " DRMC-OS-200 DIM A R 2 1 / 2 " 3 9 / 16 " DRMC-OS o 3" 4 3 / 16 " DRMC-OS-300 4" 5 11 / 16 " DRMC-OS-400 Tape & Joint Compound *Contact Fry Reglet for installation recommendations DD.6 BULLNOSE DRYWALL THICKNESS DIM. B STUD Bullnose 2 1 / 2 " DBN / 8 " DBN Radius DIM.A DIM.B Tape & Joint Compound 24 S & MOLDINGS BROCHURE

24 ARCHITECTURAL METALS / S + MOLDINGS DE.1 COLUMN COLLAR DRYWALL 13/ 16" 3/ 4" 3/ 4" ACOUSTICAL/DRYWALL 13/ 16" 1 1 /2" 3/ 4" 3/ 4" 1/8" PLASTER 13/ 16" 3/ 4" 3/ 4" 3/16" Column covers are manufactured to fit specific columns from 10" to 48" in diameter. usage Fry Reglet Column Collar provides a functional, attractive trim creating a reveal at column/ceiling joint. PVC spacer insures an attractive appearance and no light leaks. Fabricated to fit specific column sizes. Tightens in place with a turnbuckle and stainless steel metal band. Available with white or dark bronze PVC spacer. Finish is clear anodized, painted or finished with a chemical conversion coating for field painting. S & MOLDINGS BROCHURE 25

25 DE.2 COLUMN RING COLUMN DIAMETERS 18" TO 48" DRYWALL (DRWT) DIM. B DEPTH WDM / 4 " DRWT / 4 " WRM / 4 " 3/ 4 " DRWT Column Reveal Column Ring Tape & Joint Compound DRYWALL (DRWT) ACOUSTICAL (WDM) 1 1 / 16" DIM.A DIM.B Column Reveal Column Ring Acoustical Ceiling ACOUSTICAL (WDM)/ WRM) COLUMN RING DETAIL 5 / 8" DIM.A DIM.B 3/4" 26 S & MOLDINGS BROCHURE

26 ARCHITECTURAL METALS / S + MOLDINGS WALL ANGLE COLUMN RING DE.3 COLUMN DIAMETERS 18" TO 48" DRYWALL CROSS SECTION) TYPE Acoustical Wall Angle Wall Angle w/taping Flange Column DRYWALL ACOUSTICAL/DRYWALL 1" 1" Wall Angle Column Ring Tape & Joint Compound ACOUSTICAL/DRYWALL CROSS SECTION) 3/4" DRML -100 M1WA 120 Column Acoustical Ceiling Wall Angle Column Ring S & MOLDINGS BROCHURE 27

27 DF.1 "W" MOLDING DEPTH DIM. B DIM. C DEPTH NON-VENTED VENTED WDM WDM-50-V / 4 " 1" WDM WDM-50-V-75 3/ 4 " 1" WDM WDM-625-V-75 DIM.C 3/ 4 " 3/ 4 " WRM WRM-75-V DIM.A Acoustical Ceiling DIM.B 3/4" "W" Reveal Molding DF.2 DRYWALL / ACOUSTICAL DEPTH DRMAD / 4 " DRMAD /2" Acoustical Ceiling DIM A. 1" / Acoustical Reveal 28 S & MOLDINGS BROCHURE

28 ARCHITECTURAL METALS / S + MOLDINGS ACOUSTICAL CEILING TRIM DF.3 3/ 4 " DRAT-75 1" DRAT-100 Acoustical Ceiling DIM A. Acoustical Ceiling Trim Tape & Joint Compound ACOUSTICAL MOLDING DF.4 STEP DIM. B STEP DEPTH USAGE FDA-50 FDA-625 3/ 4 " 3/ 4 " 3/ 4 " Plaster FDA-75 DIM A. DIM B. Acoustical Ceiling Acoustical Molding 3/4" S & MOLDINGS BROCHURE 29

29 DF.5 "W" ACOUSTICAL MATERIAL POCKET NON-VENTED VENTED 7/ 8 " 3/ 4 " WARM WARM-875-V-75 1" 2 1 /4" 3/4" "W" Acoustical Reveal Acoustical Tile 1/2" DF.6 "F" ACOUSTICAL DEPTH NON-VENTED VENTED 7/ 8 " 3/ 4 " FARM FARM-875-V /4" 3/4" 15/16" "F" Acoustical Reveal Acoustical Tile 1/2" 30 S & MOLDINGS BROCHURE

30 ARCHITECTURAL METALS / S + MOLDINGS "J" ACOUSTICAL TRIM DF.7 J DEPTH 7/ 8 " JAM /8" Acoustical Tile 1/2" "J" Acoustical Reveal S & MOLDINGS BROCHURE 31

31 DG.1 S SPECIAL SECTIONS PRM MOLDING / PART NO SPECIAL MOLDING / PART NO " 2 1 /8" 3/4" 5/8" 5/8" 3/16" 5/8" MODIFIED CHANNEL MOLDING / PART NO SPECIAL MOLDING / PART NO. T PIECE 1/2" 3/8" 1 1 /2" 3/4" 2 1 /2" 3/4" SPECIAL J MOLDINGS / PART NO " 1 1 /2" 3/16" 32 S & MOLDINGS BROCHURE

32 ARCHITECTURAL METALS / S + MOLDINGS DG.1 S SPECIAL SECTIONS SPECIAL J MOLDINGS / PART NO SPECIAL J MOLDINGS / PART NO /4" 5/8" 2 1 /4" 1/2" 7/64" 5/8" 3/16" CONTEMPORARY S DG.2 DEPTH DIM. B CDRM DIM A. 3/ 4 " CDRM " CDRM /8 CDRM CDRM / 4 " CDRM " CDRM /4" DIM B. Contemporary Reveal Tape & Joint Compound S & MOLDINGS BROCHURE 33

33 DH.1 GLAZING TRACK DIM A GLAZING TRACK 3 1 / 2 " DMGT / 4 " DMGT / 8 " DMGT / 8 " DMGT / 4 " DMGT /4" DIM A 3/4" Glazing Track GLASS GASKET SIZES Glass GLASS SIZE GASKET FOR USE WITH 1 / 4 " GLASS RR 3657 FOR USE WITH 3 / 8 " GLASS RR 3654 FOR USE WITH 1 / 2 " GLASS RR 3730 Gasket DRYWALL CEILING TRACK (DRM ) 1 1 /2" 3/4" 34 S & MOLDINGS BROCHURE

34 ARCHITECTURAL METALS / S + MOLDINGS DH.2 GLAZING TRACK DRYWALL MOLDING END CLOSURE (DMEC) 3 1 / 2 " DMEC / 4 " DMEC / 8 " DMEC / 8 " DMEC 4875 DIM A DMEC ACOUSTICAL CEILING TRACK (ARM ) 1 1 /2" *STOCK IN WHITE Ceiling Tile Ceiling Tile 1 " 3/4" 1 " DRYWALL/ACOUSTICAL CEILING TRACK DRMAD ) 1 1 /2" Ceiling Tile 3/4" 1 " S & MOLDINGS BROCHURE 35

35 DI.1 INTEGRATED FUNCTION INTEGRATED FUNCTIONAL RAIL (IFR) 5/8" 2" 3 3 /4" Integrated Functional Reveal Metal 5/8" usage Fry Reglet Integrated Functional Reveal Rail creates a Horizontal reveal designed to accept a chartrail insert and hook insert. Provides an aesthetic reveal that is fully integrated into dry wall. 36 S & MOLDINGS BROCHURE

36 ARCHITECTURAL METALS / S + MOLDINGS DI.1 INTEGRATED FUNCTION 2 AND 3 CHARTRAIL INSERT (IFRCHARTRAIL) (IFR3CHARTRAIL) 5/8" Integrated Functional Reveal Chartrail Insert Rubber Gasket Metal usage Fry Reglet 2 and 3 Chartrail Insert to be inserted into the Integrated Functional Reveal Rail. Chartrail can be used to hold markers or as a stand for presentations or artwork. guide specification Where indicated on drawings, Fry Reglet Chartrail Insert shall be installed. Aluminum shall be extruded alloy 6063 T5, with chemical conversion coating, clear anodized or other specified finish. Refer to finish section. HOOK INSERT (IFRHOOKINSERT) *(Hook insert) sold separately. Note: Maximum capacity per hook insert is 75 pounds. Not to exceed 4 clips per 10ft. peice Integrated Functional Reveal 5/8" 9/16" 1" wide Hook Insert Rubber Gasket Metal usage Fry Reglet Hook Insert is designed to be inserted into the Integrated Functional Reveal Rail. Hooks can be placed anywhere on the reveal as needed, and repositioned for different sized objects like artwork, photography or presentations. guide specification Where indicated on drawings, Fry Reglet Hook Insert shall be installed. Aluminum shall be extruded alloy 6063 T5. Standard finish clear anodized. S & MOLDINGS BROCHURE 37

37 DJ.1 INSTALLATION INSTALLATION GUIDE tapeable flange shapes: 1. The moldings are installed after the gypsum board is installed. The installer can either provide space for the moldings at the time of installation or cut the board with a router. 2. The framer should provide backing so moldings may be attached with #6 drywall screws 16 o.c. for horizontal applications. 3. Prior to taping, the attachment flanges should be cleaned using a non-abrasive cleaner and soft rag. When veneer plaster is specified, the flanges must be treated with a bonding agent. 4. Make sure the tape does not overlap the edge of the reveal and an 8 wide trowel is used to apply the final skim coat. 5. Fiberglass, self-adhesive drywall tape will cut taping time and help to avoid possible cracking. non-tapeable flange shapes: 1. These types are installed prior to drywall installation and generally do not require taping or spackling. ADDING SNAP-INS 1. When the reveal molding is used with the Snap-In, use the base molding with 1/2 ground when installing 1/2 drywall, and base molding with 5/8 ground when installing 5/8 drywall. (See Right Way ) 2. Make sure base is supported to ensure that the base does not become deformed when applying Snap In. 3. NEVER use 1/2 base with 5/8 drywall when adding Snap-In. (See Wrong Way ) RIGHT WAY WRONG WAY Tape & Joint Compound Tape & Joint Compound Wall Covering Wall Covering Snap-in Reveal w/ Sheath Snap-in Reveal w/ Sheath Reveal Molding Reveal Molding Fastener Fastener correct installation: molding installed flush to framing incorrect installation: molding not installed flush to framing 38 S & MOLDINGS BROCHURE

38 ARCHITECTURAL METALS / S + MOLDINGS DJ.2 FACTORY FABRICATED INTERSECTIONS INSTALLATION GUIDE Factory fabricated intersections are available to connect horizontal and vertical joints of moldings of the same or different types. Intersections are available in T, L, and + shapes. The mitered joints are welded and the 6 legs are measured from the center point of the reveal. Corner pieces can be manufactured for both inside and outside conditions. Custom leg lengths are available. S & MOLDINGS BROCHURE 39

39 DJ.3 END CAPS INSTALLATION GUIDE End Caps are not available for all products; please consult a customer service representative. PCS END CAP WITHOUT FLANGE DRM END CAP WITHOUT FLANGE DRM END CAP WITH TAPING FLANGE DRMB WITH END CAP CUTTING + FIELD PAINTING 1. Materials can be cut with a chop saw, using a 96 tooth blade for non-ferrous metal. 2. Use a lubricant (WD-40 or grease stick) on the blade prior to cutting. Do not use an abrasive cut-off wheel. 3. Be sure to clean lubricant off trim. If field painting of clear anodized moldings is the only alternative, the following steps must be taken to improve the bonding of the paint to the metal surface: Clean and treat material with an acid etch solution e.g. mild concentration of muriatic acid), rinse thoroughly and dry. Use a primer recommended by the manufacturer of the paint to be used. Apply coating following manufacturer s specifications. However, Fry Reglet cannot accept responsibility for performance of field applied coatings over anodized finishes. 40 S & MOLDINGS BROCHURE

40 ARCHITECTURAL METALS / S + MOLDINGS DJ.4 VENTILATION VENTING INFORMATION Example of vented profile with five rows of slots shown. Venting is available in one row of slots up to five rows. Specify number of rows required on your order. usage Moldings requiring venting are provided with vents for air movement. In size charts they are identified with a V in the center of the product number. guide specification All vent slots are 1/8 wide by 1 long, spaced 11/2 on center lengthwise. Multiple rows are spaced laterally 1/2 on center. Each row of vent slots lengthwise provides approximately one square inch of vented area per lineal foot. VENTILATION INFORMATION VENT SLOT VENT AREA PER LINEAL FOOT APPROX. PERCENT OF AREA VENTED APPROX. 1 1 sq. inch 15.0% 3/ 4 " 1 1 sq. inch 12.5% 7/ 8 " 1 1 sq. inch 9.5% 1" 1 1 sq. inch 9.4% 1 1 / 8 " 1 1 sq. inch 8.3% 1 1 / 2 " 2 2 sq. inch 12.5% 2" 3 3 sq. inch 14.1% 2 1 / 2 " 3 3 sq. inch 11.3% 3" 5 5 sq. inch 14.3% 4" 5 5 sq. inch 10.4% 6" 8 8 sq. inch 12.5% S & MOLDINGS BROCHURE 41

41

42 ARCHITECTURAL METALS / S + MOLDINGS CONTENTS P Plaster + E.I.F.S Moldings PA S AND CHANNEL SCREED /CONTROL JOINTS PA.1 PA.2 PA.3 PA.4 Channel Screed/Control Joint ¼"Channel Screed/Control Joint "V" Reveal Molding/Control Joint F Reveal Molding PF PF.1 Fascia Corner Molding TRIMS PF.2 "J" Molding PA.5 PA.6 PA.7 T Reveal Molding Plaster Key Reveal Molding Reveal Molding PG CORNERS PG.1 PG.2 X Corner Molding Corner Key PB PB.1 Column Collar COLUMN PB.2 Column Collar COLLARS PH E.I.F.S. MATERIALS PH.1 PH.2 PH.3 E.I.F.S. Channel Screed E.I.F.S. Soffit Vent Clean Finish E.I.F.S. Soffit Vent PH.4 E.I.F.S. Soffit Vent Direct Applied) PC DRIP SCREEDS PC.1 PC.2 PC.3 PC.4 PC.5 PC.6 PC.7 7 / 8 " Variable Fascia Drip Screed 7 / 8 " Fascia Drip Screed 3 / 4 " Fascia Drip Screed 5 / 8 " Fascia Drip Screed 3 / 8 " Fascia Drip Screed Soffit Molding F Drip Cap PI VENEER PLASTER PH.5 PH.6 PI.1 PI.2 PI.3 PI.4 E.I.F.S. Soffit Vent Soffit Vented E.I.F.S. Veneer Plaster Reveal Veneer Plaster F Reveal Veneer Plaster Z Reveal Contemporary Reveal PC.8 Foundation Weep Screed PJ PJ.1 Ventilation Information PD PLASTER/STUCCO EXPANSION SCREED PE SOFFIT VENTS PD.1 PE.1 PE.2 PE.3 PE.4 2-Piece Plaster Expansion Screed 7 / 8 " Soffit Vent 3 / 4 " Soffit Vent 5 / 8 " Soffit Vent 7 / 8 " Variable Soffit Vent INSTALLATION PJ.2 PJ.3 PJ.4 PJ.5 PJ.6 PJ.7 PJ.8 PJ.9 PJ.10 Lathing - Vertical Installation Lathing - Horizontal Installation 2 Piece Plaster Expansion Screed Factory Fabricated Intersections Factory Fabricated Intersections Factory Fabricated Intersections Factory Fabricated Intersections Factory Fabricated Intersections Curved Moldings PE.5 Ceiling Soffit Vent PE.6 PE.7 Perimeter Soffit Molding Soffit Vent E.I.F.S. PK PK.1 Finishes FINISHES PK.2 Finishes PK.3 Finishes S & MOLDINGS BROCHURE 43

43 SHAPE FINDER INDEX P Plaster + E.I.F.S Moldings GUIDE SPECIFICATION Where indicated on drawings, Fry Reglet reveals and moldings, as manufactured by Fry Reglet Corporation, shall be installed. Fry Reglet aluminum reveals and moldings shall be extruded alloy 6063 T5, with chemical conversion coating, primed finish, clear anodized or other specified finish. Refer to finish section. PA.1 PA.2 PA.3 PA.4 PA.5 CHANNEL SCREED /CONTROL JOINT 1/4"CHANNEL SCREED /CONTROL JOINT "V" MOLDING /CONTROL JOINT F MOLDING T MOLDING PA.6 PA.7 PB.1 PB.2 PC.1 PLASTER KEY MOLDING MOLDING COLUMN COLLAR COLUMN COLLAR DRIP SCREED PC.2 PC.3 PC.4 PC.5 PC.6 STUCCO DRIP SCREED 3/4" FASCIA DRIP SCREED 5/8" FASCIA DRIP SCREED 3/8" FASCIA DRIP SCREED SOFFIT MOLDING PC.7 PC.8 PD.1 PE.1 PE.2 F DRIP CAP FOUNDATION WEEP SCREED 2-PIECE PLASTER EXPANSION SCREED SOFFIT VENT 3/4" SOFFIT VENT 44 S & MOLDINGS BROCHURE

44 ARCHITECTURAL METALS / S + MOLDINGS SHAPE FINDER INDEX P Plaster + E.I.F.S Moldings PE.3 PE.4 PE.5 PE.6 PF.1 5/8" SOFFIT VENT VARIABLE SOFFIT VENT CEILING SOFFIT VENT PERIMETER SOFFIT MOLDING FASCIA CORNER MOLDING PF.2 PG.1 PG.2 PH.1 PH.2 J MOLDING INSIDE / OUTSIDE X CORNER MOLDING CORNER KEY E.I.F.S. CHANNEL SCREED E.I.F.S. SOFFIT VENT PH.3 PH.4 PH.5 PH.6 PH.7 CLEANFINISH E.I.F.S. SOFFIT VENT E.I.F.S. SOFFIT VENT DIRECT APPLIED) E.I.F.S. SOFFIT VENT E.I.F.S. DRIP SCREED SOFFIT VENTED E.I.F.S. PI.1 PI.2 PI.3 PI.4 VENEER PLASTER MOLDING VENEER PLASTER F MOLDING VENEER PLASTER Z MOLDING CONTEMPORARY MOLDING S & MOLDINGS BROCHURE 45

45 PA.1 CHANNEL SCREED /CONTROL JOINT DIM A " DIM A. Plaster DIM B. Channel Screed 3/16" Approved Sheathing Plaster Lathing Water Resistant Barrier DEPTH DIM. B NON-VENTED VENTED 1/ 4 "* 3/ 4 " PCS PCS-25-V-75 1/ 4 "* 1 1 / 2 " PCS PCS-25-V-150 3/ 8 "* PCS PCS-375-V-50 3/ 8 "* 3/ 4 " PCS PCS-375-V-75 3/ 8 "* 1" PCS PCS-375-V-100 3/ 8 "* 1 1 / 2 " PCS PCS-375-V-150 3/ 8 " 3" PCS PCS-375-V-300 DCS DCS-50-V-50 3/ 4 " DCS DCS-50-V-75 1" DCS DCS-50-V / 2 " DCS DCS-50-V-150 2" DCS DCS-50-V-200 3" DCS DCS-50-V-300 4" DCS DCS-50-V-400 DCS DCS-625-V-50 3/ 4 " DCS DCS-625-V-75 1" DCS DCS-625-V / 2 " DCS DCS-625-V-150 * For one-coat stucco systems Weep holes available upon request W DEPTH DIM. B NON-VENTED VENTED 2" DCS DCS-625-V / 2 " DCS DCS-625-V-250 3" DCS DCS-625-V-300 4" DCS DCS-625-V-400 6" DCS DCS-625-V-600 3/ 4 " PCS PCS-75-V-50 3/ 4 " 3/ 4 " PCS PCS-75-V-75 3/ 4 " 1" PCS PCS-75-V-100 3/ 4 " 1 1 / 2 " PCS PCS-75-V-150 3/ 4 " 2" PCS PCS-75-V-200 3/ 4 " 2 1 / 2 " PCS PCS-75-V-250 3/ 4 " 3" PCS PCS-75-V-300 3/ 4 " 4" PCS PCS-75-V-400 3/ 4 " 6" PCS PCS-75-V-600 1" 3/ 4 " PCS PCS-100-V-75 1" 1" PCS PCS-100-V-100 1" 3" PCS PCS-100-V / 2" 1 1 / 2 " PCS PCS-150-V S & MOLDINGS BROCHURE

46 ARCHITECTURAL METALS / S + MOLDINGS PA.2 1/4" CHANNEL SCREED /CONTROL JOINT + DEPTH 1/ 4 " PCS-75-25/25 1/4" 3/16" Metal 1/4" Channel Screed /Control Joint 1" 1/4" 3/4" Plaster or Stucco Lathing Approved Sheathing Water Resistant Barrier S & MOLDINGS BROCHURE 47

47 PA.3 "V" MOLING /CONTROL JOINT DEPTH 3/ 4 " 1 1 / 2 " PCSV-75 5/ 16 " 3/ 4 " PCSV-75-Short 1 1/2" 90 O 3/16" Plaster or Stucco Lathing "V" Reveal Molding /Control joint Plaster or Stucco 3/4" Approved Sheathing 3 5/8" Water Resistant Barrier 3/4" 3/16" Lathing Short "V" Reveal Molding /Control joint 3/4" 90 O 5/16" Plaster or Stucco Plaster or Stucco 2 5/8" Approved Sheathing Water Resistant Barrier 48 S & MOLDINGS BROCHURE

48 ARCHITECTURAL METALS / S + MOLDINGS PA.4 F MOLDING DEPTH DIM. B NON-VENTED VENTED 3/ 8 " FPM FPM-375-V-50 3/ 4 " FDM FDM-50-V-75 Metal FDM FDM-625-V-50 3/ 4 " FDM FDM-625-V-75 Ceiling 1" FDM FDM-625-V / 2 " FDM FDM-625-V / 2 " FDM FDM-625-V-250 3" FDM FDM-625-V-300 3/ 4 " FPM FPM-75-V-50 3/ 4 " 3/ 4 " FPM FPM-75-V-75 3/ 4 " 1" FPM FPM-75-V-100 DIM. B Plaster or Stucco "F" Reveal Molding 3/16" Lathing 3/ 4 " 1 1 / 2 " FPM FPM-75-V-150 3/ 4 " 2" FPM FPM-75-V-200 3/ 4 " 3" FPM FPM-75-V-300 Weep holes available upon request Approved Sheathing Water Resistant Barrier PA.5 T MOLDING PLASTER THICKNESS DIM. B NON-VENTED VENTED Metal 3/ 4 " 3/ 4 " TRM TRM-75-V-75 Wall 3/ 4 " 1 1 / 8 " TRM TRM-75-V / 4 " 1 1 / 2 " TRM TRM-75-V-150 Approved Sheathing Saw Cut Optional Plaster or Stucco 3/4" DIM B. "T" Reveal Molding Water Resistant Barrier Lathing 3/16" S & MOLDINGS BROCHURE 49

49 PA.6 PLASTER KEY MOLDING DEPTH 3/ 4 " DIM. B NON-VENTED VENTED 7/ 8 " PRZ PRZ-75-V-75 Metal Wall or Column Metal 1" 3/ 4 " PRZ PRZ-75-V-100 1" Approved Sheathing DIM. B Plaster Key Reveal Molding 3/16" Plaster or Stucco PA.7 MOLDING PLASTER THICKNESS DIM. B NON-VENTED VENTED 3/ 4 " 3/ 4 " PRM PRM-75-V-75 For use with columns, curved sizes available to fit columns above 18" in diameter. Metal Metal 1" 3/4" Approved Sheathing Reveal Molding 3/4" Plaster or Stucco Wall or Column 50 S & MOLDINGS BROCHURE

50 ARCHITECTURAL METALS / S + MOLDINGS PB.1 COLUMN COLLAR DRYWALL ACOUSTICAL/DRYWALL 13/ 16" 13/ 16" 1 1 /2" 3/ 4" 3/ 4" 3/ 4" 3/ 4" 1/8" PLASTER 13/ 16" 3/ 4" 3/ 4" 3/16" usage Fry Reglet Column Collar provides a functional, attractive trim creating a reveal at column/ ceiling joint. PVC spacer insures an attractive appearance and no light leaks. Fabricated to fit specific column sizes. Tightens in place with a turnbuckle and stainless steel metal band. Available with white or dark bronze PVC spacer. Finish is clear anodized, painted or finished with a chemical conversion coating for field painting. S & MOLDINGS BROCHURE 51

51 PB.2 COLUMN COLLAR DRYWALL COMPONENTS ADJUSTABLE BAND ALUMINUM MOLDING PLASTER ACOUSTICAL/DRYWALL SIZES Three simple components secured by an adjustable band. Column covers are manufactured to fit specific columns from 10" to 48" in diameter. usage Patented Fry Reglet Column Collar provides a functional, attractive trim creating a reveal at column/ceiling joint. PVC spacer insures an attractive appearance and no light leaks. Fabricated to fit specific column sizes. Tightens in place with a turnbuckle and stainless steel metal band. Available with white or dark bronze PVC spacer. Finish is clear anodized, painted or finished with a chemical conversion coating for field painting. 52 S & MOLDINGS BROCHURE

52 ARCHITECTURAL METALS / S + MOLDINGS PC.1 VARIABLE FASCIA DRIP SCREED NON-VENTED VENTED DS DS-875-V-875 Plaster or Stucco Metal Approved 2 3 / 16" Sheathing Lathing Drip Screed Stucco Soffit 3/16" Water Resistant Barrier S & MOLDINGS BROCHURE 53

53 PC.2 FASCIA DRIP SCREED NON-VENTED VENTED 1 1 / 2 " DS DS-875-V-150 2" DS DS-875-V-200 3" DS DS-875-V-300 Metal Stucco Fascia Approved Sheathing Stucco Drip Screed Stucco Soffit Lathing Water Resistant Barrier DS DS DS /8" 2 3 /8" 3/16" 3/16" 3/16" 54 S & MOLDINGS BROCHURE

54 ARCHITECTURAL METALS / S + MOLDINGS PC.3 3/4" FASCIA DRIP SCREED STUCCO THICKNESS NON-VENTED VENTED 3/ 4 " 3/ 4 " DS DS-75-V-75 3/ 4 " 2" DS DS-75-V-200 3/ 4 " 3" DS DS-75-V-300 DS DS Metal 2 " Stucco Fascia Approved Sheathing 3/4" 3/4" Thin Stucco Drip Screed Stucco Soffit Lathing Water Resistant Barrier DS /300 NOT TO SCALE) DS /300 Metal 2 3/8" DIM A. 3/4" 3/4" 3/16" Stucco Fascia Thin Stucco Drip Screed Lathing Stucco Soffit Water Resistant Barrier S & MOLDINGS BROCHURE 55

55 PC.4 5/8" DRIP SCREED NON-VENTED VENTED 3" DS-875-5/8-300 DS-875-5/8-V-300 Stucco Fascia Metal 2 3 /16" Approved Sheathing Lathing 3" 5/8" Soffit 5/8" 5/8" Stucco Drip Screed 3/8" Water Resistant Barrier PC.5 3/8" FASCIA DRIP SCREED NON-VENTED VENTED 3/ 4 " DS DS-375-V-875 Lathing Metal 2 3 /16" Approved Sheathing 3/8" Plaster Fascia Drip Screed 1/2" Plaster Soffit or Less As Specified 3/8" 3/8" Water Resistant Barrier 56 S & MOLDINGS BROCHURE

56 ARCHITECTURAL METALS / S + MOLDINGS PC.6 SOFFIT MOLDING DIM. B THICKNESS DIM. C LEG NON-VENTED VENTED Fascia Metal 3" WPM WPM-50-V-300 3/ 4 " 2" 3/ 16 " V 3/ 4 " 3" 3/ 4 " 4" 3/ 16 " WPM WPM-75-V-300 3/ 16 " WPM WPM-75-V " Approved Sheathing DIM A. DIM B. Stucco Soffit Molding DIM C. Lathing Water Resistant Barrier PC.7 F DRIP CAP STUCCO DEPTH 3/ 4 " 3/ 4 " 2221 Weep holes available upon request Metal Water Resistant Barrier Lathing Approved Sheathing Stucco 3/4" 3/16" 3/4" "F" Drip Cap 3/8" Door or Window Header 3/16" 1" 1/4" S & MOLDINGS BROCHURE 57

57 PC.8 FOUNDATION WEEP SCREED SCREED LENGTH 3 3 / 8 " 3 3 / 8 " FLANGE DEPTH 3/ 4 " FWS-75A (Aluminum) 3/ 4 " FWS-75 (Vinyl) Water Resistant Barrier Sheathing Lathing 3 3 /8" FWS-75 Foundation 3/4" PD.1 2-PIECE PLASTER EXPANSION SCREED DIM. B 3/ 4 " DCS PC Metal 1 1 / 2 " DCS PC 3/ 4 " 1/ 4 " PCS PC 1 1 /4" 3/ 4 " PCS PC 3/ 4 " 3/ 4 " PCS PC 3/ 4 " 1" PCS PC 3/ 4 " 1 1 / 2 " PCS PC Sealant By Others) DIM B. 2-Piece Plaster Expansion Screed DIM A. 3/ 4 " 2" PCS PC Lathing Metal Water Resistant Barrier Approved Sheathing 58 S & MOLDINGS BROCHURE

58 ARCHITECTURAL METALS / S + MOLDINGS PE.1 SOFFIT VENT DS / 2 " DS-875-V-150 2" DS-875-V-200 Metal Metal 3" DS-875-V /8" Approved *See page PJ-1 for data on number of vents and amount of vented area/sq. ft. Stucco Fascia Soffit-Vent DIM A. Stucco Sheathing Soffit 3/16" Lathing Water Resistant Barrier 3/4" SOFFIT VENT PE.2 Metal 3/ 4 " DS-75-V-75 2" DS-75-V-200 3" DS-75-V-300 *See page PJ-1 for data on number of vents and amount of vented area/sq. ft. Stucco Fascia 2 " DIM A. Soffit-Vent Stucco Soffit Approved Sheathing 3/4" 3/4" 3/16" Lathing Water Resistant Barrier S & MOLDINGS BROCHURE 59

59 PE.3 5/8" SOFFIT VENT SOFFIT SUPPORT FLANGE Stucco Fascia Metal 3" DS-875-5/8-V-300 *See page PJ-1 for data on number of vents and amount of vented area/sq. ft. Approved Sheathing 2 3 /16" Soffit-Vent 3" Stucco Soffit 5/8" 3/8" Water Lathing Resistant Barrier PE.4 VARIABLE SOFFIT VENT Metal 7/ 8 " DS-375-V-875 *See page PJ-1 for data on number of vents and amount of vented area/sq. ft. Approved 2 3 /16" Sheathing Lathing Soffit-Vent Soffit 1/2" Fascia 3/8" 3/8" Water Resistant Barrier 60 S & MOLDINGS BROCHURE

60 ARCHITECTURAL METALS / S + MOLDINGS CEILING SOFFIT VENT PE.5 Metal DIM A. Approved Sheathing Plaster Plaster DIM B. 3/16" Lathing Soffit-Vent Water Resistant Barrier PLASTER DEPTH DIM. B PLASTER DEPTH DIM. B DCS-50-V-50 3/ 8 " PCS-375-V-50 3/ 4 " DCS-50-V-75 3/ 8 " 3/ 4 " PCS-375-V-75 1" DCS-50-V / 2 " DCS-50-V-150 2" DCS-50-V-200 3/ 8 " 1" PCS-375-V-100 3/ 8 " 1 1 / 2 " PCS-375-V-150 3/ 8 " 3" PCS-375-V-300 3" DCS-50-V-300 4" DCS-50-V-400 3/ 4 " 3/ 4 " PCS-75-V-50 3/ 4 " PCS-75-V-75 DCS-625-V-50 3/ 4 " DCS-625-V-75 3/ 4 " 1" PCS-75-V-100 3/ 4 " 1 1 / 2 " PCS-75-V-150 1" DCS-625-V / 2 " DCS-625-V-150 2" DCS-625-V / 2 " DCS-625-V-250 3" DCS-625-V-300 3/ 4 " 2" PCS-75-V-200 3/ 4 " 2 1 / 2 " PCS-75-V-250 3/ 4 " 3" PCS-75-V-300 3/ 4 " 4" PCS-75-V-400 3/ 4 " 6" PCS-75-V-600 4" DCS-625-V-400 1" 3/ 4 " PCS-100-V-75 6" DCS-625-V-600 1" 1" PCS-100-V-100 1/ 4 " 3/ 4 " PCS-25-V-75 1" 3" PCS-100-V-300 *See page PJ-1 for data on number of vents and amount of vented areas/sq. ft. 1 1 / 2" 1 1 / 2 " PCS-150-V-150 S & MOLDINGS BROCHURE 61

61 PE.6 PERIMETER SOFFIT MOLDING DIM B. STUCCO DEPTH DIM. C LEG Metal 3" WPM-50-V-300 3/ 4 " 2" 3/ 4 " 3" 3/ 16 " 1680-V 3/ 16 " WPM-75-V-300 1" Approved Sheathing 3/ 4 " 4" 3/ 16 " WPM-75-V-400 *See page PJ-1 for data on number of vents and amount of vented area/sq. ft. Exterior Building Wall DIM A. Vented Soffit Molding DIM C. 7 /8" Lathing Stucco DIM B. Water Resistant Barrier PE.7 SOFFIT VENT E.I.F.S. 8 ROWS VENT PATTERN* 6" 5 Rows VFS-600 Epoxy Gray 8 Rows VFS-600 Epoxy Gray *Specify vent pattern when ordering. Vent Slots 1 /8 wide by 1 long spaced 1 1 /2 on center lengthwise. 1 3/8" 3/8" 1" 1/8" 5 ROWS Soffit Stucco Vent E.I.F.S. Soffit 6" 1 3/8" 3/8" 1" Soffit Stucco Vent E.I.F.S. Soffit 1/8" 62 S & MOLDINGS BROCHURE

62 ARCHITECTURAL METALS / S + MOLDINGS PF.1 FASCIA CORNER MOLDING DIM. B APPLICATION Fascia 1 5 / 8 " FCM-50 DRYWALL 2 3 /8" 1 5 / 8 " 3/ 4 " FCM-75 PLASTER Lathing Water Resistant Barrier DIM A. Approved Sheathing 3/16" DIM B. Acoustical Ceiling 1 5 /8" Fascia Corner Molding PF.2 J MOLDING DIM. B DIM. C Approved Sheathing 3/ 16 " 1 1 / 8 " JDM / 4 " JDM Plaster Metal 3/ 16 " 1 1 / 8 " JDM-625 3/ 4 " 3/ 4 " 3/ 16 " 1 1 / 8 " JPM-75 3/ 16 " 3" JPM Water Resistant Barrier 1" 3/ 16 " 1 1 / 8 " JPM-100 Weep holes available upon request Lathing DIM C. DIM B. DIM A. "J" Molding S & MOLDINGS BROCHURE 63

63 PG.1 X CORNER MOLDING XCM DIM. B DEPTH 3/ 4 " 7/ 8 " XCM / 8 " XDM / 8 " XDM / 4 " 1 1 / 2 " XCM PXM 7/ 8 " PXM PIXM 3/ 4 " PIXM /16" 3/16" 3/4" 2" 3/4" 2" PG.2 CORNER KEY Corner Key DIM. 3/16" PCM / 4 " PCM / 2 " 3/4" Stucco Lathing 3/4" Metal Stucco Water Resistant Barrier Approved Sheathing 64 S & MOLDINGS BROCHURE

64 ARCHITECTURAL METALS / S + MOLDINGS PH.1 E.I.F.S. CHANNEL SCREED INSTALLATION DETAILS / Cross Section Substrate NON-VENTED VENTED 3/ 4 " PCS PCS-25-V / 2 " PCS PCS-25-V-150 Metal DIM A. 3/16" E.I.F.S. Channel Screed Finish System 1/4" PH.2 E.I.F.S. SOFFIT VENT INSTALLATION DETAILS / Cross Section PCS-75-V-50 Metal 3/ 4 " PCS-75-V-75 1" PCS-75-V / 2 " PCS-75-V-150 2" PCS-75-V / 2 " PCS-75-V-250 3" PCS-75-V-300 4" PCS-75-V-400 E.I.F.S. Soffit Vent DIM A. 3/4" 6" PCS-75-V-600 *See page PJ-1 for data on number of vents and amount of vented area/sq. ft. Mesh Finish Coat Gypsum Sheathing 3/ 16" E.I.F.S. Board Base Coat Mesh S & MOLDINGS BROCHURE 65

65 PH.3 CLEANFINISH E.I.F.S. SOFFIT VENT DIM. B UNVENTED 2" SV-50-V-200/EIFS SV /EIFS 3" SV-50-V-300/EIFS SV /EIFS 4" SV-50-V-400/EIFS SV /EIFS 3/ 4 " 3" SV-75-V-300/EIFS SV /EIFS Approved Sheathing Mesh *See page PJ-1 for data on number of vents and amount of vented area/sq. ft. DIM A. 3/4" DIM B. E.I.F.S. Finish Coat Soffit Vent Base Coat E.I.F.S. Board PH.4 E.I.F.S. SOFFIT VENT DIRECT APPLIED DIM. B DIM. B DRM-50-V-50 DRM-625-V-50 DRM-50-V-625 DRM-625-V-625 3/ 4 " DRM-50-V-75 3/ 4 " DRM-625-V-75 1" DRM-50-V / 2 " DRM-50-V-150 2" DRM-50-V / 2 " DRM-50-V-250 3" DRM-50-V-300 4" DRM-50-V-400 1" DRM-625-V / 4 " DRM-625-V / 2 " DRM-625-V-150 2" DRM-625-V / 2 " DRM-625-V-250 3" DRM-625-V-300 4" DRM-625-V-400 *See page PJ-1 for data on number of vents and amount of vented area/sq. ft. 6" DRM-625-V-600 DIM A. DIM B. 66 S & MOLDINGS BROCHURE Direct Applied E.I.F.S. Soffit Vent *Denglass Gold, Durock, or other approved DEF substrate. *Refer to EIFS manufacturer for installation requirements

66 ARCHITECTURAL METALS / S + MOLDINGS PH.5 E.I.F.S. SOFFIT VENT INSTALLATION DETAILS / Cross Section 8 ROWS VENT PATTERN* 6" 5 Rows VFS-600 Epoxy Gray 8 Rows VFS-600 Epoxy Gray *Specify vent pattern when ordering. Vent Slots 1 /8 wide by 1 long spaced 1 1 /2 on center lengthwise. 1 3/8" 5 ROWS 1/8" 3/8" 1" 6" Soffit Stucco Vent E.I.F.S. Soffit 1 3/8" 3/8" Soffit Stucco Vent E.I.F.S. Soffit 1" 1/8" PH.6 E.I.F.S. DRIP SCREED INSTALLATION DETAILS / Cross Section NON-VENTED VENTED 3/ 4 " DS DS-75-V-75 2" DS DS-75-V-200 3" DS DS-75-V-300 *See page PJ-1 for data on number of vents and amount of vented area/sq. ft. 2 " Mesh 3/4" 3/4" Fascia E.I.F.S. Drip Screed 3/4" 3/16" Finish Coat Base Coat S & MOLDINGS BROCHURE 67

67 VENEER PLASTER S VENEER PLASTER S SLEEK + SLIM. Fry Reglet offers a selection of aluminum reveals and molding specifically designed for use with veneer plaster. Taller reveal edge to provide for 1/16" to 3/32" veneer plaster thickness. Reveal edge that slopes away from the taping flange to prevent cracking at the joint. Sharper reveal edge so less metal is visible and the reveal is clean and crisp. 68 S & MOLDINGS BROCHURE

68 ARCHITECTURAL METALS / S + MOLDINGS VENEER PLASTER MOLDING PI.1 DIM. B 3/ 8 " 3/ 8 " VPR VPR / 4 " VPR / 2 " VPR Metal Veneer Plaster 3/ 8 " VPR VPR DIM B. Veneer Plaster Reveal VPR / 4 " VPR DIM A. VENEER PLASTER F PI.2 DEPTH DIM. B Ceiling 3/ 8 " 3/ 8 " VPRF VPRF DIM B. Veneer Plaster "F" Reveal 3/ 4 " VPRF / 8 " VPRF VPRF Veneer Plaster VPRF / 4 " VPRF DIM A. Metal S & MOLDINGS BROCHURE 69

69 PI.3 VENEER PLASTER Z DEPTH DIM. B 3/ 8 " 3/ 8 " VPRZ VPRZ / 4 " VPRZ / 8 " VPRZ VPRZ VPRZ Veneer Plaster DIM A. Metal 3/ 4 " VPRZ Veneer Plaster "Z" Reveal DIM B. Door Jamb, Window Frame Sill Ect. PI.4 CONTEMPORARY DEPTH DIM. B CVPR / 8" CVPR / 4 " CVPR Metal 1" CVPR CVPR CVPR /4" DIM. B Contemporary Reveal 3/ 4 " CVPR " CVPR Veneer Plaster DIM A. U.S. Patent No. 452, S & MOLDINGS BROCHURE

70 ARCHITECTURAL METALS / S + MOLDINGS PJ.1 VENTILATION INFORMATION VENT SLOT VENT AREA PER LINEAL FOOT APPROX. PERCENT OF AREA VENTED APPROX. 1 1 sq. inch 15.0% 3/ 4 " 1 1 sq. inch 12.5% 7/ 8 " 1 1 sq. inch 9.5% 1" 1 1 sq. inch 9.4% 1 1 / 8 " 1 1 sq. inch 8.3% 1 1 / 2 " 2 2 sq. inch 12.5% 2" 3 3 sq. inch 14.1% 2 1 / 2 " 3 3 sq. inch 11.3% 3" 5 5 sq. inch 14.3% 4" 5 5 sq. inch 10.4% 6" 8 8 sq. inch 12.5% Example of vented profile with five rows of slots shown. Venting is available in one row of slots up to five rows. Specify number of rows required on your order. PJ.2 LATHING VERTICAL INSTALLATION INSTALLATION lathing - vertical installation 1. Place building paper behind all moldings and shiplap a minimum of Secure moldings on 7 centers using fasteners as appropriate to substrate to meet ASTM C Install wire lath over installation flange of moldings. 4. Use vinyl or cloth tape specifically manufactured for masking anodized aluminum trim prior to plastering. For painted surfaces, use plastic tape. Cement Plaster (Stucco) Channel Screed (PCS-TYPE MOLDING) Metal Lath Building Paper (6" Shiplap) Exterior Sheathing S & MOLDINGS BROCHURE 71

71 PJ.3 INSTALLATION LATHING HORIZONTAL INSTALLATION lathing - horizontal installation 1. Place building paper behind all moldings and shiplap a minimum of Secure moldings on 16 centers using fasteners as appropriate to substrate. 3. Place building paper over upper flange of reveal, extending upward and under the above building paper overlap. 4. Place wire lath over upper installation flange on horizontal installation. 5. Install wire lath over bottom installation flange of moldings. 6. Use vinyl or cloth tape specifically manufactured for masking aluminum trim prior to plastering. For painted surfaces, use plastic tape. installation of moldings after building paper and wire lath have been installed Make sure that the 7/8 installation flanges are covered with wire lath. This will prevent cracking. Note: Uniform Building Code requires two layers of grade D paper when applied over wood base sheathing. Building Paper (6" Shiplap) Building Paper Metal Lath Channel Screed (PCS-TYPE MOLDING) Exterior Sheathing Cement Plaster (Stucco) Metal Lath 72 S & MOLDINGS BROCHURE

72 ARCHITECTURAL METALS / S + MOLDINGS PJ.4 INSTALLATION INSTALLATION 2-PIECE PLASTER EXPANSION JOINT installation - 2-piece plaster expansion joint 1. Place building paper behind all moldings and shiplap a minimum of Prior to attachment, place sealant in the movement groove along the back of the molding. note: If installation is horizontal, place movement flange on top and lap additional building paper over top flange. 3. Leave alignment clips in place while fastening moldings to framing or studs. 4. Secure moldings on 16 centers using fasteners as appropriate to substrate. 5. Place building paper and wire lath over upper movement installation flange on horizontal installation, and shiplap a minimum of 6. (See Horizontal Installation) 6. Install wire lath over bottom installation flange of moldings. 7. Use vinyl or cloth tape specifically manufactured for masking anodized aluminum trim prior to plastering. For painted surfaces, use plastic tape. note: Qualifies for use as an expansion joint for stucco and plaster applications when installed in accordance with ASTM C1063. sealant + connector clips 1. The use of sealant at all butt joints and Fry Reglet Connector Clips is recommended. 2. Use Fry Reglet Connector Clips to align molding during installation. 3. Apply sealant as indicated. S & MOLDINGS BROCHURE 73

73 PJ.5 FACTORY FABRICATED INTERSECTIONS FACTORY FABRICATED INTERSECTIONS Factory fabricated intersections and corner pieces of the same or different moldings are used to connect horizontal and vertical joints, or transitioning from plane to plane. The intersections are welded and sealed. Standard leg lengths are 6 from the center point of the reveal. Custom leg lengths are available. "T" INTERSECTION End Caps are not available for all products; please consult a customer service representative. "+" INTERSECTION 74 S & MOLDINGS BROCHURE

74 ARCHITECTURAL METALS / S + MOLDINGS PJ.6 FACTORY FABRICATED INTERSECTIONS FACTORY FABRICATED INTERSECTIONS factory fabricated intersections Presented as examples of ways Factory Fabricated Intersections can be used to speed installation and reduce costs. PCS CHANNEL L INTERSECTION FACTORY - FABRICATED INSIDE CORNER MADE FROM FRY REGLET "PCS" TYPE MOLDING - MITERED, WELDED + TAPED prefabricated and pre-assembled joints Factory fabricated intersections are available from Fry Reglet to speed installation and reduce labor cost. Intersections are available in the configurations shown below as well as custom configurations and may be made up of the same or different shapes. The joints are welded. note: Water resistant tape is factory applied to the backs of all PCS and DCS factory fabricated intersections. Intersections are furnished with 6 legs to join with straight sections of moldings. END CAP DRMB WITH END CAP Custom leg lengths are available. End Caps are not available for all products; please consult a customer service representative. S & MOLDINGS BROCHURE 75

75 PJ.7 FACTORY FABRICATED INTERSECTIONS FACTORY FABRICATED INTERSECTIONS factory fabricated intersections Presented as examples of ways Factory Fabricated Intersections can be used to speed installation and reduce costs. PCS CHANNEL INSIDE CORNER PCS CHANNEL OUTSIDE CORNER FACTORY - FABRICATED INSIDE CORNER MADE FROM FRY REGLET PCS TYPE MOLDING - MITERED, WELDED + TAPED FACTORY - FABRICATED INSIDE CORNER MADE FROM FRY REGLET PCS TYPE MOLDING - MITERED, WELDED + TAPED PCS CHANNEL + INTERSECTION PCS CHANNEL T INTERSECTION FACTORY - FABRICATED INSIDE CORNER MADE FROM FRY REGLET PCS TYPE MOLDING - MITERED, WELDED + TAPED FACTORY - FABRICATED INSIDE CORNER MADE FROM FRY REGLET PCS TYPE MOLDING - MITERED, WELDED + TAPED 76 S & MOLDINGS BROCHURE

76 ARCHITECTURAL METALS / S + MOLDINGS PJ.8 FACTORY FABRICATED INTERSECTIONS FACTORY FABRICATED INTERSECTIONS factory fabricated intersections Presented as examples of ways Factory Fabricated Intersections can be used to speed installation and reduce costs. DRM/DRMZ INTERSECTION AT DOORJAMB PCS/PCS 2-PC INTERSECTION FPM/PCS WINDOW SILL XCM/PCS CORNER/INTERSECTION FACTORY - FABRICATED INTERSECTION AT SILL MADE FROM FRY REGLET "FPM" AND "PCS" TYPE MOLDING - MITERED, WELDED + TAPED FACTORY - FABRICATED CORNER / CHANNEL SCREED INTERSECTION MADE FROM FRY REGLET "XCM" VERT) & PCS" HORIZ) MITERED, WELDED + TAPED S & MOLDINGS BROCHURE 77

77 PJ.9 FACTORY FABRICATED INTERSECTIONS FACTORY FABRICATED INTERSECTIONS factory fabricated intersections Fry Reglet's expertise at curving moldings combined with factory fabrication of intersections at virtually any angle, permits the complete assembly of decorative elements ready for installation. Two examples are shown below. The first uses curved and straight sections of the same drywall part and the second combines three plaster parts for an intriguing effect. Designers may let their imaginations soar. All that is required is a sketch together with the parts to be used. Fry Reglet will design the decorative element, quote a complete price and furnish a complete assembly, ready to install. example 1 A SINGLE MOLDING FACTORY FABRICATED example 2 VARIOUS DISSIMILAR MOLDINGS FACTORY FABRICATED PARTS USED: PCS PLASTER CHANNEL SCREED PCS PLASTER CHANNEL SCREED PART USED: DRM DRYWALL MOLDING PCS PLASTER CHANNEL SCREED description A straight and curved assembly of reveal moldings serves as the base of this intricate fabrication combining corners and intersections at various angles with straight and curved sections of moldings. description Fry Reglet Plaster Channel Screeds with three reveal widths (3/4", 11/2" and 2") are combined to produce this intricate pattern. The widest reveal frames the entire assembly while 11/2" width is curved into an attractive design element. The center pattern is assembled from the narrowest moldings. 78 S & MOLDINGS BROCHURE

78 ARCHITECTURAL METALS / S + MOLDINGS PJ.10 CURVED MOLDINGS CURVED MOLDINGS With over 20 years experience curving aluminum moldings, Fry Reglet is the leader in this technology. Fry Reglet's curving process is precise and our aluminum moldings hold their shape from the factory to the job site. Whether conforming to conditions such as archways, columns and curved ceilings; or when using Fry Reglet moldings to create a pattern within the wall, Fry Reglet's curving capability can add surprisingly dramatic effects to any project. curving fry reglet moldings Fry Reglet is able to curve virtually any shape in our assortment of drywall and plaster moldings. The only limitation to this process is the size of the curve, measured in terms of the radius. Radius is the geometric term given to the distance from the center of a circle to its outside edge. The shape of the molding, and the direction of the curve, determine the minimum curve that can be achieved. Contact your local distributor or Fry Reglet's Customer Service Department for price quotations, radius minimums for specific parts and radius order forms. Fry Reglet's curving process yields 9 usable feet of material from each 10 foot part. Provision for this 10% spoilage should be made when ordering. ordering curved moldings To assist in ordering curved moldings, Fry Reglet requests specific detailed information. By following the simple steps below, you are assured of obtaining the exact radius desired. Indicate Curve Desired Contact Fry Reglet Customer Service to obtain radius order sheets. Indicate Radius Indicate the radius desired from measuring points on radius detail. In most cases the radius measurement should be field checked. Indicate Molding + Finish Desired Indicate number of molding and finish desired (i.e. DRM clear anodized). Indicate Quantity Indicate total footage desired (add 10% for spoilage). curved terminology Measuring Radius In measuring curves, careful attention should be given to the point on the molding to which the radius is measured. Radius detail sheet indicates Point of Measurement. For additional specification and ordering information contact a customer service representative. S & MOLDINGS BROCHURE 79