Price List. and. Ordering Guide

Transcription

1 PRODUCTS & ACCESSORIES Price List and Ordering Guide Effective January 1, 2010

2 PRODUCTS & ACCESSORIES Concrete Products Internal, Backpack & Pole Vibrators 1-4 External Vibrators 5-6 Walk-behind Concrete Trowels 7-8 Ride-on Concrete Trowels 9 Laser Levels 10 Wet Screed 11 Rebar Treatment 12 Compaction Products Vibratory Rammers 13 Vibratory Plates 14 Reversible Vibratory Plates 15 Vibratory Rollers 16 Demolition Products Rotary/Demolition Hammers & Breakers Cut-off Saws Floor Saws Utility Products Dewatering Pumps 31 Diaphragm Pumps 32 Centrifugal Trash Pumps Submersible Pumps Portable Generators Mobile Generators Light Ballon & LightTowers Hydronic Surface Heat Hydronic Air Heat 53 Indirect Air Heat Dehumidification 57 TABLE OF CONTENTS Accessories: Accessories receive the same discount as machines. Parts programs and discounts do not apply to accessories. WACKER NEUSON defines accessories as those items included under the "Accessories" headings in this Price List & Ordering Guide. Specifications, item numbers and prices may change due to continuous product development.

3 CONCRETE PRODUCTS & ACCESSORIES #N/A INTERNAL VIBRATORS High Frequency Internal Vibrators (115V) IRFU30, 115V, 5 METER $1, IRFU38, 115V, 5 METER $1, IRFU45, 115V, 5 METER $1, IRFU57, 115V, 5 METER $2, IRFU57, 115V, 8 METER $2, IRFU57, 115V, 10 METER $2, IRFU65, 115V, 5 METER $2, IRFU65, 115V, 8 METER $2, CAP-RUBBER TIP, IRFU38 ONLY $ CAP-RUBBER TIP, IRFU45 ONLY $ High Frequency Internal Vibrators with Operating Handle (115V) IRSEFU30, 115V, 1 METER, MOLDED "D" HANDLE $1, IRSEFU38, 115V, 1 METER, MOLDED "D" HANDLE $2, IRSEFU45, 115V, 1 METER, MOLDED "D" HANDLE $2, IRSEFU57, 115V, 1 METER, MOLDED "D" HANDLE $2, Page 1

4 CONCRETE PRODUCTS & ACCESSORIES #N/A INTERNAL VIBRATOR SELECTION CHART The Internal Vibrator Selection Chart provides you with recommended component combinations for motors, heads, and shafts for optimum performance. Please refer to the guide when selecting components for your specific application needs. M - Motor Selection Chart A5000 Selection Chart Page 2

5 CONCRETE PRODUCTS & ACCESSORIES #N/A INTERNAL VIBRATORS Internal Vibrator Power Units M1000/115 MOTOR, 1.3HP, UL $ M2000/115 MOTOR, 2.3HP, UL, CUL $ M3000/115 MOTOR, 3.1HP, UL, CUL $ A5000 POWER UNIT, HONDA, 5.4HP $1, Internal Vibrator Hybrid Heads H25HA-HEAD, 1" $ H35HA-HEAD, 1 3/8" $ H45HA-HEAD, 1 3/4" $ H50HA-HEAD, 2" $ Internal Vibrator Head H65 HEAD, 2 1/2" $ Internal Vibrator Short Heads H25(S) HEAD, 1" $ H35(S) HEAD, 1 3/8" $ H45(S) HEAD, 1 3/4" $ RUBBER TIP, H35S $62.00 RUBBER TIP, H45S $62.00 Internal Vibrator Rubber Heads HR48 HEAD, 1 7/8" $ HR65 HEAD, 2 1/2" $ HR70 HEAD, 2 3/4" $ HR70(S) HEAD, 2 3/4" (SHORT) $ Internal Vibrator Shafts SM1E FLEXSHAFT, 3 FT $ SM2E FLEXSHAFT, 6.5 FT $ SM4E FLEXSHAFT, 13 FT $ SMOS FLEXSHAFT, 1.5 FT $ SM1S FLEXSHAFT, 3 FT $ SM2S FLEXSHAFT, 6.5 FT $ SM3S FLEXSHAFT, 10 FT $ SM4S FLEXSHAFT, 13 FT $ SM5S FLEXSHAFT, 16.5 FT $ SM7S FLEXSHAFT, 23 FT $ SM9S FLEXSHAFT, 30 FT $ Accessories for Internal Vibrator Sets "SS" SHAFT CONNECTOR $ CARRYING STRAP $27.00 BACKPACK, M-MOTOR $ SWITCH-GFCI $ (use with backpack # ) Note: When ordering heads and flexshafts, please refer to model and item number. Page 3

6 CONCRETE PRODUCTS & ACCESSORIES #N/A INTERNAL, BACKPACK AND POLE VIBRATORS Internal Vibrator Kits HMS KIT, M1000-SM2E-H25HA $ HMS KIT, M2000-SM2S-H35HA $1, HMS KIT, M2000-SM3S-H35HA $1, HMS KIT, M2000-SM4S-H35HA $1, HMS KIT, M2000-SM2S-H45HA $1, HMS KIT, M2000-SM3S-H45HA $1, HMS KIT, M2000-SM4S-H45HA $1, HMS KIT, M3000-SM2S-H50HA $1, HMS KIT, M3000-SM3S-H50HA $1, HMS KIT, M3000-SM4S-H50HA $1, HMS KIT, M3000-SM3S-H $1, Backpack Vibrators (Pendulum) BV 35A-P BACKPACK VIBRATOR KIT (SPM3+PH45) $2, BV 50A-P BACKPACK VIBRATOR KIT (SPM3+PH45) $2, Note: Units come equipped with a flexshaft and head. Backpack Replacement Shafts and Heads 3M FLEXSHAFT & 1¾" P-HEAD, BCKPCK VIBR $ PH45, 1¾" P-HEAD, BACKPACK & POLE VIBR $ SPM2, PENDULUM FLEXSHAFT, 6.5' $ Pole Vibrator (Pendulum) PV 35A HAND-HELD GAS VIBRATOR $1, M FLEXSHAFT & 1 ¾" P-HEAD, POLE VIBR $ PH45, 1¾" P-HEAD, BACKPACK & POLE VIBR $ FRAME-TUMBLE CAGE $ Note: Unit comes equipped with a flexshaft and head. Page 4

7 CONCRETE PRODUCTS & ACCESSORIES #N/A EXTERNAL VIBRATORS External Electric Vibrators, Fixed Frequency, 3600 RPM AR 36/3.6/115W - EXTERNAL VIBRATOR $ AR 36/3.6/240W - EXTERNAL VIBRATOR $ AR 51/3.6/460 - EXTERNAL VIBRATOR $2, AR 52/3.6/460 - EXTERNAL VIBRATOR $2, AR 54/3.6/460 - EXTERNAL VIBRATOR $1, AR 75/3.6/460/60HZ - EXTERNAL VIBRATOR $2, External Electric Vibrators, w/built-in Inverter ARFU 36/6/115/US - EXTERNAL VIBRATOR $2, External Electric Vibrators, Variable Frequency, Inverter Driven, RPM AR 36/6/042 - EXTERNAL VIBRATOR $ AR 54/6/250 - EXTERNAL VIBRATOR $1, AR 52/6/042 - EXTERNAL VIBRATOR $2, AR 54/6/042 - EXTERNAL VIBRATOR $1, AR 75/6/042 - EXTERNAL VIBRATOR $2, External Vibrators, Pneumatic PAR 6/2 - EXTERNAL VIBRATOR $ PAR 10/2 - EXTERNAL VIBRATOR $ PAR 27/2 - EXTERNAL VIBRATOR $ PAR 45/2 - EXTERNAL VIBRATOR $ Electronic Frequency and Voltage Converters, Variable FUE 6/042/200 - ELECTRONIC CONVERTER $6, FUE M/S 85A/460 - ELECTRONIC CONVERTER $11, * FUE M/S 85A/460RC - ELECTRONIC CONVERTER $15, FUE M/S 150A/460 - ELECTRONIC CONVERTER $18, * FUE M/S 150A/460RC - ELECTRONIC CONVERTER $24, * FUE M/S 300A/460RC - ELECTRONIC CONVERTER $29, * Built to order. Allow 8-10 weeks for delivery. Electronic Frequency and Voltage Converters, Fixed FUE 2/042/200Hz - INVERTER $3, KTU 2/042/200Hz - INVERTER $3, Low Noise Vibratory Tables CS TABLE, LOW NOISE ** Call for price * CS TABLE, LOW NOISE ** Call for price * Built to order. Allow 8-10 weeks for delivery. ** For pricing, please contact Customer Support at # Page 5

8 CONCRETE PRODUCTS & ACCESSORIES #N/A EXTERNAL VIBRATORS External Vibrator Accessories Item Number Price Portable Jobsite Clamps, 3 Series VISE CLAMP, SV3 (AR52, AR54) $ VISE CLAMP, SV4 (AR36, AR3/2) $ VISE CLAMP, SV4-L (AR36, AR3/2) $ VISE CLAMP, SV5 (AR36, AR3/2) $ CLAMP, SV41 (AR36) $ CLAMP, SV51 (AR36) $ CLAMP, SV54 (AR36) $ Electric and Pneumatic Saddle Clamps, 52 Series SADDLE CLAMP (AR 52) $ SADDLE CLAMP (PAR 6, PAR10) $ SADDLE CLAMP (PAR 27, PAR 45) $ Mounting Hardware, 51 Series MOUNTING BASE PLATE (AR51) $ TAPER PIN (STD-250mm) $75.00 TAPER PIN (THICK-250mm) $95.00 TAPER PIN (LONG-350mm) $ Mounting Plates for Permanent Installation MOUNTING PLATE (AR36) $50.00 MOUNTING PLATE (AR54) $60.00 MOUNTING PLATE (AR75) $65.00 External Vibrator Accessories, Miscellaneous PLUG, 32A / 42V, STANDARD $35.00 RECEPTACLE 42V $55.00 CABLE, 42V (PER METER) $12.00 PLUG, 16A / 250V $35.00 RECEPTACLE 250V $ CABLE, 250V (PER METER) $12.00 BOLT SET (4), M16x170, ZINC GRADE $45.00 (AR54, AR75) BOLT SET (4), M16x150, ZINC GRADE (AR53) $45.00 WEIGHT ADJUSTMENT TOOL (AR36) $18.02 PRECAST CONCRETE ISOLATOR PAD $60.00 (max load 2,000 lbs.) Page 6

9 CONCRETE PRODUCTS & ACCESSORIES #N/A WALK-BEHIND TROWELS Walk-behind Trowel, 24" CT24-4A TROWEL $2, SET-FINISH BLADES, 4 PER SET $51.00 BLADE-PAN, 24" $ Note: Unit comes equipped with handle, blades, pan and lift hook. Walk-behind Trowels, 36" CT36-5A TROWEL (handle not included) $2, CT36-6 TROWEL (handle not included) $2, CT36-8A TROWEL (handle not included) $2, CT36-9 TROWEL (handle not included) $2, CT36-8A-V TROWEL (handle not included) $3, CT36-9-V TROWEL (handle not included) $3, Note: All units come standard with combination blades. Handles for 36" Walk-behind Trowels TWIST PITCH $ ADJUSTABLE, TWIST PITCH $ FOLDING, TWIST PITCH $ FOLDING, ADJUSTABLE, TWIST PITCH $ ADJUSTABLE, PRO SHIFT $ FOLDING, ADJUSTABLE, PRO SHIFT $ Accessories for 36" Walk-behind Trowels FLOAT BLADE, SET OF 4, 36" $74.00 FINISH BLADE, SET OF 4, 36" $57.00 COMBO BLADE, SET OF 4, 36" $89.00 LIFTING BRACKET, 36" $92.00 LIFT KIT, 36" (for use with a 2x4) $41.00 KIT-WEIGHT $ Please refer to page 9 for 36" pan options. 36" Walk-behind Trowel Kits (includes handle) CT36-5A TROWEL, W/TWIST PITCH HANDLE $2, CT36-5A TROWEL, W/ADJ. TWIST PITCH HANDLE $2, CT36-5A TROWEL, W/ADJ. PRO SHIFT HANDLE $2, Model Nomenclature Key for Walk-behind Trowels A = Honda engine V = Variable clutch Models without engine designation specified in nomenclature are equipped with a Wacker Neuson engine Page 7

10 CONCRETE PRODUCTS & ACCESSORIES #N/A WALK-BEHIND TROWELS Walk-behind Trowels, 48" CT48-8A TROWEL (handle not included) $2, CT48-9 TROWEL (handle not included) $2, CT48-11A TROWEL (handle not included) $3, CT48-13A-V TROWEL (handle not included) $4, Note: All units come standard with combination blades. Handles for 48" Walk-behind Trowels TWIST PITCH $ ADJUSTABLE, TWIST PITCH $ FOLDING, TWIST PITCH $ FOLDING, ADJUSTABLE, TWIST PITCH $ ADJUSTABLE, PRO SHIFT $ FOLDING, ADJUSTABLE, PRO SHIFT $ Accessories for 48" Walk-behind Trowels FLOAT BLADE, SET OF 4, 48" $95.00 FINISH BLADE, SET OF 4, 48" $63.00 COMBO BLADE, SET OF 4, 48" $ LIFTING BRACKET, 48" $92.00 LIFT KIT, 48" (for use with a 2x4) $41.00 WEIGHT KIT, SET OF 2 (10 lbs each) $ Please see following page for 48" pan options. 48" Walk-behind Trowel Kits (includes handle) CT48-8A TROWEL, W/TWIST PITCH HANDLE $3, CT48-8A TROWEL, W/ADJ. TWIST PITCH HANDLE $3, CT48-8A TROWEL, W/ADJ. PRO SHIFT HANDLE $3, Model Nomenclature Key for Walk-behind Trowels A = Honda engine V = Variable clutch Models without engine designation specified in nomenclature are equipped with a Wacker Neuson engine Page 8

11 CONCRETE PRODUCTS & ACCESSORIES #N/A RIDE-ON TROWELS CRT36-24A RIDE-ON TROWEL $14, CRT36-24A RIDE-ON TROWEL, W/WHEEL KIT $15, CRT36-25 RIDE-ON TROWEL $14, CRT36-25 RIDE-ON TROWEL, W/WHEEL KIT $15, CRT48-34V RIDE-ON TROWEL $21, CRT48-35V RIDE-ON TROWEL $18, CRT48-35L RIDE-ON TROWEL $23, CRT48-35L-PS RIDE-ON TROWEL $28, TRANSPORT DOLLY WHEEL KIT $ REPLACEMENT WHEELS $ (2) for transport dolly wheel kit ( ) WEIGHT KIT, SET OF 2 (10 lbs each) $ Note: All units come standard with finish blades. Accessories for 36" Ride-on Trowels FINISH BLADES, SET OF 4, 36" $57.00 COMBO BLADES, SET OF 4, 36" $89.00 FLOAT BLADES, RH, 36" $84.00 FLOAT BLADES, LH, 36" $84.00 PAN PAK, 36", 2 PC $ PAN PALLET, 36" FLAT FLOAT, 10 PC $1, Accessories for 48" Ride-on Trowels FINISH BLADES, SET OF 4, 48" $63.00 COMBO BLADES, SET OF 4, 48" $ FLOAT BLADES, RH, 48" $95.00 FLOAT BLADES, LH, 48" $81.00 PAN PAK, 48" SUPER FLAT, 4-BLADE, 2 PC $ PAN PALLET, 48" SUPER FLAT, 4-BLADE, 10 PC $1, PAN PAK, 48" SUPER FLAT, 5-BLADE, 2 PC $ PAN PALLET, 48" SUPER FLAT, 5-BLADE, 10 PC $2, PAN PAK, 48" FLAT FLOAT, 4-BLADE, 2 PC $ PAN PALLET, 48" FLAT FLOAT, 4-BLADE, 10 PC $1, PAN PAK, 48" FLAT FLOAT, 5-BLADE, 2 PC $ PAN PALLET, 48" FLAT FLOAT, 5-BLADE, 10 PC $2, Model Nomenclature Key for Ride-on Trowels A = Honda engine V = Vanguard engine L = Lombardini diesel PS = Power Steer Models without engine designation specified in nomenclature are equipped with a Wacker Neuson engine Page 9

12 CONCRETE PRODUCTS & ACCESSORIES #N/A LASER LEVELS VAL 300 LASER LEVEL $1, Includes: instrument, detector & clamp, nicad battery pack, charger, and carrying case HAL 300 LASER LEVEL $1, Includes: instrument, detector & clamp, 6v charger, and carrying case PAL 450 LASER LEVEL $1, Includes: alkaline instrument, detector & clamp, and carrying case KIT-TRIPOD, 13' ROD, INCHES $ (includes carrying bag) KIT-TRIPOD, 13' ROD, TENTHS $ (includes carrying bag) KIT-TRIPOD, 13' ROD, METRIC $ (includes carrying bag) TRIPOD-ALUNIMUM FLAT HEAD, VALUE $ TRIPOD-HEIGHT ADJUSTABLE $ ROD-16' ALUMINUM, INCHES $66.00 ROD-16' ALUMINUM, TENTHS $66.00 ROD-COLLAPSIBLE, INCHES $80.00 (extends to 13') ROD-COLLAPSIBLE, TENTHS $80.00 (extends to 13') BATTERY-NICAD PACK, PAL $ BATTERY-NICAD PACK, PAL $ CHARGER-NICAD, PAL $48.00 BATTERY-ALKALINE PACK, PAL $69.00 CHARGER, HAL $54.00 BATTERY-ALKALINE, VAL $42.00 BATTERY-NICAD PACK, VAL $85.00 CHARGER, VAL $54.00 DETECTOR $ DETECTOR-CLAMP $26.00 CASE-CARRYING $ MOUNT-MAGNETIC COLUMN $ Nomenclature Key for Laser Levels: V AL 300 V = Value H = Heavy Duty P = Premium AL = Automatic Laser 300 Meters = 1,000' 450 Meters = 1,500' Page 10

13 CONCRETE PRODUCTS & ACCESSORIES #N/A WET SCREED Wet Screed Power Unit P35A, POWER UNIT $2, Wet Screed Blades SB 4F, SCREED BLADE (4 FT) $ SB 15M, SCREED BLADE (1.5M) $ SB 6F, SCREED BLADE (6 FT) $ SB 20M, SCREED BLADE (2.0M) $ SB 8F, SCREED BLADE (8 FT) $ SB 10F, SCREED BLADE (10 FT) $ SB 12F, SCREED BLADE (12 FT) $ SB 14F, SCREED BLADE (14 FT) $ SB 16F, SCREED BLADE (16 FT) $ Page 11

14 CONCRETE PRODUCTS & ACCESSORIES #N/A REBAR TREATMENT Economy Rebar Cutters RCE-16/120, 16MM CUTTING $1, RCE-20/120, 20MM CUTTING $1, RCE-25/120, 25MM CUTTING $2, Premium Rebar Cutters RCP-12/120, 12MM CUTTING $2, RCP-16/120, 16MM CUTTING $2, RCP-20/120, 20MM CUTTING $3, RCP-25/120, 25MM CUTTING $4, RCP-32/120, 32MM CUTTING $4, HB-20, BENDING HEAD FOR RCP $ HB-25, BENDING HEAD FOR RCP $ Automatic Rebar Tier DF 16 DRILL FIX $1, WIRE TIES, 7700 COUNT $ DEMO FRAME $69.00 Page 12

15 COMPACTION PRODUCTS & ACCESSORIES #N/A VIBRATORY RAMMERS BS50-2 RAMMER, 10" SHOE (24mm) $3, KIT-WHEEL $ KIT-SHOE, WOOD 4" (includes 12" extension) $ BS50-2i RAMMER, 11" PLASTIC SHOE $3, BS50-2i RAMMER, 10"SHOE, HI-ALTITUDE $3, BS50-4s RAMMER, 11" PLASTIC SHOE (24mm) $3, KIT-WHEEL $ KIT-SHOE, WOOD 4" (includes 12" extension) $ BS60-2i RAMMER, 11" PLASTIC SHOE $4, BS60-2i RAMMER, 11" PLASTIC SHOE, HI-ALTITUDE $4, BS60-4s RAMMER, 11" PLASTIC SHOE $4, BS60-4s RAMMER, 11" PLASTIC SHOE, HI-ALTITUDE $4, KIT-WHEEL $ BS70-2i RAMMER, 11" PLASTIC SHOE $4, BS70-2i RAMMER, 13" PLASTIC SHOE $4, KIT-WHEEL $ DS70 RAMMER, DIESEL, 11" PLASTIC SHOE, EPA $5, DS70 RAMMER, DIESEL, 13" PLASTIC SHOE, EPA $5, Page 13

16 COMPACTION PRODUCTS & ACCESSORIES #N/A VALUE & PREMIUM VIBRATORY PLATES Value Vibratory Plates VP1135A VIBROPLATE $1, VP1135AW VIBROPLATE $1, VP1340A VIBROPLATE $1, VP1340AW VIBROPLATE $2, VP1340 VIBROPLATE $1, VP1340W VIBROPLATE $2, VP1550A VIBROPLATE $1, VP1550AW VIBROPLATE $2, VP1550 VIBROPLATE $1, VP1550W VIBROPLATE $2, VP1550W VIBROPLATE, W/WHEEL KIT $2, VP2050A VIBROPLATE $2, VP2050AW VIBROPLATE $2, VP2050W VIBROPLATE $2, VP2050Y VIBROPLATE, DIESEL $4, KIT-PROTECTIVE PAD, 35/40CM $ KIT-PROTECTIVE PAD, 50CM $ KIT-WATER SYSTEM, 35/40CM $ KIT-WATER SYSTEM, 50CM $ (not for use with VP2050 Models) KIT-WHEEL, ALL SIZES $ Model Nomenclature Key for Vibratory Plates A = Honda Y = Yanmar W = Water Tank Models without engine designation in nomenclature are equipped with a Wacker Neuson engine Premium Vibratory Plates WP1540A VIBROPLATE $2, WP1540AW VIBROPLATE $2, WP1540 VIBROPLATE $2, WP1540W VIBROPLATE $2, WP1550A VIBROPLATE $2, WP1550AW VIBROPLATE $2, WP1550AW VIBROPLATE, W/WHEEL KIT $2, WP1550 VIBROPLATE $2, WP1550W VIBROPLATE $2, WP1550W VIBROPLATE, W/WHEEL KIT $2, KIT-PROTECTIVE PAD, 40CM $ KIT-PROTECTIVE PAD, 50CM $ KIT-WATER SYSTEM, WP1540-WP $ KIT-WHEEL, WP1540-WP $ Page 14

17 COMPACTION PRODUCTS & ACCESSORIES #N/A REVERSIBLE VIBRATORY PLATES BPU2540A-VIBROPLATE $5, BPU2540-VIBROPLATE $5, BPU3050A-VIBROPLATE $6, BPU3050-VIBROPLATE $6, KIT-PROTECTIVE PAD, 40CM $ KIT-PROTECTIVE PAD, 50CM $ BPU3545A-VIBROPLATE $10, BPU5045A-VIBROPLATE $11, DPU4045H-VIBROPLATE, DIESEL $14, DPU5045H-VIBROPLATE, DIESEL $16, DPU6055-VIBROPLATE, DIESEL $20, SET-EXTENSION PLATES, 6" $1, KIT-COUPLING SET, DPU $3, DPU130-VIBROPLATE, DIESEL $35, Page 15

18 COMPACTION PRODUCTS & ACCESSORIES #N/A VIBRATORY ROLLERS RD7H-ES ROLLER, DOUBLE DRUM $19, RS800A ROLLER, SINGLE DRUM $13, RSS800A ROLLER, SINGLE DRUM $14, KIT-COCO MAT $ KIT-TRANSPORT DEVICE, BKT/BOX $ KIT-ROLLER SUPPORT, RS800A ONLY $ KIT-TRAILING WHEEL $ RT56-SC2 TRENCH ROLLER $44, RT82-SC2 TRENCH ROLLER $45, KIT-NARROW DRUM $4, KIT-WIDE DRUM $4, KIT-SMOOTH DRUM $5, RD12A-90 ROLLER, DOUBLE DRUM $19, RD12A-90 ROLLER, W/FOLDABLE ROPS $20, RD12-90 ROLLER, DOUBLE DRUM $19, RD12-90 ROLLER, W/FOLDABLE ROPS $20, KIT-BACKUP ALARM $ KIT-LIGHTS, WORKING $ KIT-BEACON, STROBE $ RD16-90 ROLLER, DOUBLE DRUM $36, RD ROLLER, DOUBLE DRUM $38, KIT-LIGHTS, ROADING $1, LIGHT-BEACON, ROTATING $ RD ROLLER * Call for price RD ROLLER * Call for price KIT-SLIDING SEAT * Call for price KIT-SPARK ARRESTOR * Call for price * For pricing, please contact Customer Support at # Page 16

19 DEMOLITION PRODUCTS & ACCESSORIES #N/A ROTARY/DEMOLITION HAMMERS & BREAKERS EH6/M/115 BREAKER $ EHB7/M/115 BREAKER $1, EH9/BLM/115 BREAKER $1, EH9/BL/115 BREAKER $1, EHB11/BLM/115 BREAKER $1, EHB11/BL/115 BREAKER $1, EHB11/BLS/115 BREAKER $1, Steel Accessories (for EH9/BL, EHB11BL) MOIL POINT, 9"UC $21.00 MOIL POINT, 20"UC $28.00 CHISEL, 1" x 10-1/2",NOM.,UC $21.00 CHISEL,1" x 20"UC $28.00 CHISEL, 2" x 11"UC $35.00 CHISEL, 3" x 12" UC $38.00 CHISEL-STAR SHAPE, 3/4 HEX $39.00 * SPADE-POINTED, 3-1/8" x 13" $ * SPADE-CLAY, 4" X 11" $33.00 * DRIVER-GROUND ROD, 5/8"ID X 3/4"OD x 10" $95.00 * EXTENSION-BUSH HAMMERING, 7"UC $40.00 * HAMMER-BUSH, 5 x 5,TEETH $63.00 * HAMMER-BUSH, 7 x 7,TEETH $70.00 * DRILL,.500"DIA.x 8.5"UC,TWIST $39.00 * DRILL,.625"DIA.x 10.0"UC,TWIST $51.00 * DRILL,.750"DIA.x 12.0"UC,TWIST $64.00 * DRILL,.875"DIA.x 12.0"UC,TWIST $74.00 * DRILL, 1"DIA.x 13-1/2",NOM,UC $84.00 * DRILL 1"DIA. X 24"UC,TWIST $89.00 * DRILL, 1.125"DIA.x 12"UC,TWIST $99.00 * DRILL, 1.25"DIA. x 13-1/2",NOM,UC $ * DRILL, 1.250"DIA. X 24"UC,TWIST $ * DRILL, 1.375"DIA. X 12"UC,TWIST $ * DRILL, 1-1/2"DIA. X 13-1/2",NOM,UC $ * DRILL, 2"DIA. X 13-1/2",NOM,UC $ * DRILL, 2"DIA.x 24"UC,TWIST $ * ADAPTER-"B"TAPER $65.00 ** DEMOLITION DISPLAY STAND ** Call for price * Discontinued item. Available while supplies last. For availability, please contact Customer Support at # ** For pricing, please contact Customer Support at # Page 17

20 DEMOLITION PRODUCTS & ACCESSORIES STEEL ACCESSORIES Spline Round Shank Chisels (for EHB11/BLS) MOIL POINT, 12" $12.00 MOIL POINT, 18" $17.00 CHISEL, 1" x 12" $12.00 CHISEL, 1" x 18" $17.00 * CHISEL-MORTAR, 1-1/8" x 12" $28.00 * SPADE-CLAY, 4" x 17" $67.00 * SCALER, 1-1/4" x 12" $17.00 SCALER, 2" x 12" $23.00 SCALER, 3" x 12" $25.00 * SCRAPER, 2" x 12" $28.00 DRIVER-GROUND ROD, 5/8"ID X 3/4"OD X 10" $74.00 * HAMMER-1 PC BUSH, 1-3/4" X 10" $59.00 * SHANK-BUSH, 12" $21.00 SDS-Max Chisels (for EH6/M, EHB7/M, EH9/BLM, EHB11/BLM) CHISEL, 1" x 12" $15.00 CHISEL, 1" x 18" $19.00 * CHISEL-MORTAR, 1-1/8" x 12" $18.00 CHISEL-STAR SHAPE $44.00 CHISEL-GOUGE, 1" x 12" $50.00 MOIL POINT, 12" $15.00 MOIL POINT, 18" $19.00 * SCALER, 1-1/4" x 12" $18.00 SCALER, 2" x 12" $24.00 SCALER, 3-1/8" x 12" $28.00 * SLOTTER, 1-1/4" x 12" $30.00 SCRAPER, 2" x 12" $29.00 SCRAPER-FLOOR, 6" x 25" $ (replacement blade is listed below) BLADE-REPLACEMENT, 6"W $37.00 (includes hardware) PLATE-HOLD DOWN $21.00 DRIVER-GROUND ROD, 5/8"ID x 3/4"OD x 10" $74.00 HAMMER-1 PC BUSH, 1-3/4" x 10" $59.00 * HAMMER-BUSH, 5x5 TEETH $32.00 * SHANK-BUSH, 10" $28.00 ASPHALT CUTTER, 4-3/8" x 16" $87.00 SPADE-CLAY, 4-1/2" x 17" $67.00 * Discontinued item. Available while supplies last. For availability, please contact Customer Support at # Page 18

21 DEMOLITION PRODUCTS & ACCESSORIES STEEL ACCESSORIES Spline Quadro X Head Hammer Drill Bits (for EHB11/BLS) DRILL-SPLINE, 5/8 X 11-4C $45.00 * DRILL-SPLINE, 5/8 X 16-4C $50.00 * DRILL-SPLINE, 5/8 X 23-4C $62.00 * DRILL-SPLINE, 5/8 X 27-4C $74.00 DRILL-SPLINE, 5/8 X 36-4C $ * DRILL-SPLINE, 3/4 X 11-4C $51.00 DRILL-SPLINE, 3/4 X 16-4C $56.00 DRILL-SPLINE, 3/4 X 23-4C $62.00 * DRILL-SPLINE, 3/4 X 27-4C $80.00 DRILL-SPLINE, 3/4 X 36-4C $ * DRILL-SPLINE, 7/8 X 16-4C $56.00 * DRILL-SPLINE, 7/8 X 23-4C $64.00 DRILL-SPLINE, 1 X 16-4C $64.00 * DRILL-SPLINE, 1 X 23-4C $70.00 DRILL-SPLINE, 1 X 36-4C $ * DRILL-SPLINE, 1-1/8 X 16-4C $80.00 DRILL-SPLINE, 1-1/8 X 23-4C $91.00 * DRILL-SPLINE, 1-1/4 X 16-4C $87.00 DRILL-SPLINE, 1-1/4 X 23-4C $98.00 * DRILL-SPLINE, 1-1/4 X 36-4C $ * DRILL-SPLINE, 1-3/8 X 16-4C $ DRILL-SPLINE, 1-3/8 X 23-4C $ DRILL-SPLINE, 1-1/2 X 23-4C $ DRILL-SPLINE, 1-3/4 X 23-4C $ DRILL-SPLINE, 2 X 23-4C $ * Discontinued item. Available while supplies last. For availability, please contact Customer Support at # Page 19

22 DEMOLITION PRODUCTS & ACCESSORIES STEEL ACCESSORIES Spline Standard Head Hammer Drill Bits (EHB11/BLS) * DRILL-SPLINE, 3/8 X 8-2C $25.00 * DRILL-SPLINE, 3/8 X 11-2C $25.00 * DRILL-SPLINE, 3/8 X 13-2C $34.00 DRILL-SPLINE, 3/8 X 16-2C $35.00 * DRILL-SPLINE, 7/16 X 13-2C $30.00 * DRILL-SPLINE, 1/2 X 11-2C $25.00 DRILL-SPLINE, 1/2 X 16-2C $32.00 * DRILL-SPLINE, 1/2 X 23-2C $38.00 * DRILL-SPLINE, 1/2 X 27-2C $42.00 * DRILL-SPLINE, 1/2 X 13-2C $35.00 * DRILL-SPLINE, 9/16 X 11-2C $30.00 DRILL-SPLINE, 9/16 X 16-2C $37.00 * DRILL-SPLINE, 9/16 X 13-2C $39.00 * DRILL-SPLINE, 9/16 X 23-2C $45.00 * DRILL-SPLINE, 5/8 X 11-2C $30.00 DRILL-SPLINE, 5/8 X 16-2C $39.00 * DRILL-SPLINE, 5/8 X 27-2C $57.00 * DRILL-SPLINE, 5/8 X 36-2C $81.00 * DRILL-SPLINE, 5/8 X 13-2C $39.00 * DRILL-SPLINE, 5/8 X 23-2C $46.00 * DRILL-SPLINE, 11/16 X 16-2C $56.00 * DRILL-SPLINE, 11/16 X 13-2C $39.00 * DRILL-SPLINE, 3/4 X 11-2C $34.00 DRILL-SPLINE, 3/4 X 16-2C $40.00 *DRILL-SPLINE, 3/4 X 23-2C $45.00 * DRILL-SPLINE, 3/4 X 27-2C $62.00 * DRILL-SPLINE, 3/4 X 36-2C $84.00 * DRILL-SPLINE, 3/4 X 13-2C $45.00 * DRILL-SPLINE, 27/32 X 16-2C $62.00 DRILL-SPLINE, 7/8 X 16-2C $50.00 * DRILL-SPLINE, 7/8 X 23-2C $56.00 * DRILL-SPLINE, 7/8 X 36-2C $84.00 DRILL-SPLINE, 1 X 16-2C $56.00 DRILL-SPLINE, 1 X 23-2C $62.00 * DRILL-SPLINE, 1 X 36-2C $87.00 * DRILL-SPLINE, 1-1/8 X 16-2C $67.00 DRILL-SPLINE, 1-1/8 X 23-2C $74.00 * DRILL-SPLINE, 1-1/4 X 36-2C $ DRILL-SPLINE, 1-1/4 X 16-2C $70.00 * DRILL-SPLINE, 1-1/4 X 23-2C $79.00 DRILL-SPLINE, 1-3/8 X 16-2C $92.00 * DRILL-SPLINE, 1-3/8 X 23-2C $ DRILL-SPLINE, 1-1/2 X 16-2C $91.00 * DRILL-SPLINE, 1-1/2 X 23-2C $ DRILL-SPLINE, 1-3/4 X 23-2C $ DRILL-SPLINE, 2 X 23-2C $ * Discontinued item. Available while supplies last. For availability, please contact Customer Support at # Page 20

23 DEMOLITION PRODUCTS & ACCESSORIES STEEL ACCESSORIES SDS-Max Hammer Drill Bits (for EH6/M, EHB7/M, EHB11/BLM) DRILL-SCS-MAX, 1/2 X 13-2C $39.00 DRILL-SDS-MAX, 1/2 X 21-2C $51.00 DRILL-SDS-MAX, 9/16 X 13-2C $40.00 * DRILL-SDS-MAX, 9/16 X 21-2C $59.00 DRILL-SDS-MAX, 1-3/4 X 23-2C $ DRILL-SDS-MAX, 2 X 23-2C $ DRILL-SDS-MAX, 5/8 X 13-4C $47.00 * DRILL-SDS-MAX, 5/8 X 21-4C $62.00 * DRILL-SDS-MAX, 11/16 X 21-4C $76.00 DRILL-SDS-MAX, 3/4 X 13-4C $50.00 DRILL-SDS-MAX, 3/4 X 21-4C $67.00 * DRILL-SDS-MAX, 3/4 X 36-4C $ * DRILL-SDS-MAX, 27/32 X 13-4C $62.00 DRILL-SDS-MAX, 7/8 X 13-4C $56.00 * DRILL-SDS-MAX, 7/8 X 21-4C $70.00 DRILL-SDS-MAX, 1 X 13-4C $63.00 DRILL-SDS-MAX, 1 X 21-4C $69.00 * DRILL-SDS-MAX, 1 X 36-4C $ * DRILL-SDS-MAX, 1-1/16 X 23-4C $99.00 DRILL-SDS-MAX, 1-1/8 X 15-4C $ * DRILL-SDS-MAX, 1-1/8 X 23-4C $99.00 DRILL-SDS-MAX, 1-1/4 X 15-4C $95.00 * DRILL-SDS-MAX, 1-1/4 X 23-4C $ * DRILL-SDS-MAX, 1-5/16 X 23-4C $ * DRILL-SDS-MAX, 1-3/8 X 23-4C $ * DRILL-SDS-MAX, 1-1/3 X 17-4C $ DRILL-SDS-MAX, 1-1/2 X 23-4C $ DRILL-SDS-MAX, 1-3/4 X 23-4C $ * Discontinued item. Available while supplies last. For availability, please contact Customer Support at # Page 21

24 DEMOLITION PRODUCTS & ACCESSORIES STEEL ACCESSORIES SDS-Max One Piece Core Bits (for EH6/M, EHB7/M, EHB11/BLM) DRILL-CORE SDS-MAX, 1-1/2 X $ * DRILL-CORE SDS-MAX, 1-1/2 X $ DRILL-CORE SDS-MAX, 2 X $ * DRILL-CORE SDS-MAX, 2 X $ DRILL-CORE SDS-MAX, 2-1/2 X $ * DRILL-CORE SDS-MAX, 2-1/2 X $ DRILL-CORE SDS-MAX, 3 X $ * DRILL-CORE SDS-MAX, 3 X $ * DRILL-CORE SDS-MAX, 3-1/2 X $ * DRILL-CORE SDS-MAX, 3-1/2 X $ KEY EJECTOR $7.00 DRILL-CENTER BIT $11.00 SDS-Max One Piece Core Bits (for EHB11/BLM) DRILL-CORE SDS-MAX, 4 X $ * DRILL-CORE SDS-MAX, 5 X $ DRILL-CORE SDS-MAX, 5 X $ DRILL-CORE SDS-MAX, 6 X $ Spline One Piece Core Bits (for EHB11/BLS) DRILL-CORE SPLINE, 1-1/2 X $ * DRILL-CORE SPLINE, 1-1/2 X $ DRILL-CORE SPLINE, 2 X $ * DRILL-CORE SPLINE, 2 X $ DRILL-CORE SPLINE, 2-1/2 X $ * DRILL-CORE SPLINE, 2-1/2 X $ DRILL-CORE SPLINE, 3 X $ * DRILL-CORE SPLINE, 3 X $ * DRILL-CORE SPLINE, 3-1/2 X $ * DRILL-CORE SPLINE, 3-1/2 X $ DRILL-CORE SPLINE, 4 X $ * DRILL-CORE SPLINE, 4 X $ * DRILL-CORE SPLINE, 5 X $ DRILL-CORE SPLINE, 5 X $ KEY EJECTOR $7.00 DRILL-CENTER BIT $11.00 * Discontinued item. Available while supplies last. For availability, please contact Customer Support at # Page 22

25 DEMOLITION PRODUCTS & ACCESSORIES STEEL ACCESSORIES Two Piece Core Bits (for EH6/M, EHB7/M, EHB11/BLS, EHB11/BLM) * DRILL-CORE BODY, 1-3/4 X $ * DRILL-CORE BODY, 2 X $ * DRILL-CORE BODY, 2-5/8 X $ * DRILL-CORE BODY, 3-1/4 X $ * DRILL-CORE BODY, 3-1/2 X $ * ADAPTER-SDS MAX-18"L $95.00 * ADAPTER-SDS MAX-8"L $76.00 * ADAPTER-SPLINE-18"L $95.00 * ADAPTER-SPLINE-8"L $76.00 * DRILL-CNTR BIT,DRIFT PIN $15.00 Two Piece Core Bits (for EHB11/BLS, EHB11/BLM) * DRILL-CORE BODY, 4 X $ * DRILL-CORE BODY, 5 X $ * DRILL-CORE BODY, 6 X $ Ratio Adapter (for EH6/M, EHB7/M, EHB11/BL, EHB11/BLS, EHB11/BLM) * ADAPTER-SPLINE,RATIO & CORE $50.00 * ADAPTER-SDS MAX,RATIO & CORE $56.00 * ADAPTER 3/4" HEX,RATIO & CORE $74.00 Select the appropriate adapter for your drill and the bits listed on the following page will fit. Bits are interchangeable with different adapters. Ratio Drill Bits * DRILL-BIT,CARBIDE 1/2' X 9" $29.00 * DRILL-BIT,CARBIDE 9/16" X 9" $36.00 * DRILL-BIT,CARBIDE 5/8" X 13" $56.00 * DRILL-BIT,CARBIDE 5/8" X 19" $75.00 * DRILL-BIT,CARBIDE 11/16" X 13" $56.00 * DRILL-BIT,CARBIDE 3/4" X 13" $62.00 * DRILL-BIT,CARBIDE 3/4" X 19" $81.00 * DRILL-BIT,CARBIDE 7/8" X 13" $84.00 * DRILL-BIT,CARBIDE 1" X 13" $95.00 * DRILL-BIT,CARBIDE 1" X 19" $ * DRILL-BIT,CARBIDE 1-1/8" X 20" $ * DRILL-BIT,CARBIDE 1-1/4" X 20" $ * DRILL-BIT,CARBIDE 1-3/8" X 20" $ * DRILL-BIT,CARBIDE 1-1/2" X 20" $ * Discontinued item. Available while supplies last. For availability, please contact Customer Support at # Page 23

26 DEMOLITION PRODUCTS & ACCESSORIES STEEL ACCESSORIES Ratio Cruciform Drill Bits (for EH6/M, EHB7/M, EHB11/BL, EHB11/BLS, EHB11/BLM) * DRILL-BIT,CRUCIFORM,1-1/2" $ * DRILL-BIT,CRUCIFORM,1-3/4" $ * DRILL-BIT,CRUCIFORM,2" $ * DRILL-BIT,CRUCIFORM,2-5/8" $ * DRILL-BIT,CRUCIFORM,3-1/2" $ CRUCIFORM $ CRUCIFORM $ Ratio Cruciform Drill Bits (for EHB11/BL, EHB11/BLS, EHB11/BLM) * DRILL-BIT,CRUCIFORM,4" $ * DRILL-BIT,CRUCIFORM,5" $ * DRILL-BIT,CRUCIFORM,6" $ Ratio Core Bits (for EH6/M, EHB7/M, EHB11/BL, EHB11/BLS, EHB11/BLM) * DRILL-CORE BIT, 1-1/2" X 3" $ * DRILL-CORE BIT, 2" X 3" $ * DRILL-CORE BIT, 2-1/2" X 3" $ * DRILL-CORE BIT, 3" X 3" $ * DRILL-CORE BIT, 3-1/2" X 3" $ Ratio Core Bits (for EHB11/BL, EHB11/BLS, EHB11/BLM) * DRILL-CORE BIT, 4" X 3" $ * DRILL-CORE BIT, 5" X 3" $ * DRILL-CORE BIT, 6" X 3" $ Ratio Pilot Bits (for EH6/M, EHB7/M, EHB11/BL, EHB11/BLS, EHB11/BLM) * DRILL-PILOT BIT,SHORT CRUCIFORM $32.00 * DRILL-PILOT BIT,LONG CRUCIFORM $34.00 * DRILL-PILOT BIT,1/2" X 6" CORE BIT $34.00 * DRILL-BIT,RATIO THREADED COUPLER $15.00 (replacement for extensions only) * Discontinued item. Available while supplies last. For availability, please contact Customer Support at # Page 24

27 DEMOLITION PRODUCTS & ACCESSORIES ROTARY/DEMOLITION HAMMERS & BREAKERS EH27/120-ELECTRIC BREAKER, LOW VIB (1 1/8 x 6 hex) $1, EH27/120-BREAKER KIT (w/cart Point & Chisel) $2, BH24-GAS BREAKER (1 1/8 x 6 hex) $4, BH24-GAS BREAKER KIT (w/cart, Point & Chisel) $4, CART-HAND, STANDARD TIRES $ MOIL POINT $23.00 CHISEL, 1" $23.00 CHISEL, 3" $35.00 CHISEL-DIGGING, 3" $89.00 * CHISEL, 3" X 24" $62.00 CHISEL-STAR SHAPE, 1-1/8" X 6" $67.00 CUTTER 5", ASPHALT $80.00 DRIVER-PIN $ DRIVER-PIN, 2"ID X 1-1/2"DEEP (1 piece) $ DRIVER-PIN, 2-1/2"ID X 1-1/2"DEEP $ (2 piece - cup and shank) DRIVER-PIPE, 2"ODx1-3/8"ID, 2pcs $ EXTENSION-TAPER, 9"UC $80.00 DRIVER-POST,CAP/U-CHANNEL $ DRIVER-POST, W/SHANK, 2" SQ, (2 piece) $ DRIVER-POST, W/SHANK, 2 1/4" SQ, (2 piece) $ PLATE-TAMPING, 6" $ SHANK-TAMPING, 9 1/2" $58.00 * WEDGE-FROST $ SPADE-CLAY $95.00 TAMPER-TIE, 3"WIDE $ ** DEMOLITION DISPLAY STAND ** Call for price * Discontinued item. Available while supplies last. For availability, please contact Customer Support at # ** For pricing, please contact Customer Support at # Page 25

28 DEMOLITION PRODUCTS & ACCESSORIES CUT-OFF SAWS BTS 930 L3 SAW $1, BTS 935 L3 SAW $1, BTS 1030 L3 SAW $1, BTS 1035 L3 SAW $1, BTS1035 L3 SAW (w/advantage Blade) $1, BTS1035 L3 SAW (w/5-advantage Blades) $1, CART-GUIDE W/SPRINKLER SYSTEM $ KIT-WATER ATTACHMENT $46.00 TANK-WATER PRESSURE $ ** DEMOLITION DISPLAY STAND ** Call for price Nomenclature Key for Blades: DB GP U 125 Blade Type D - Diamond A - Abrasive Blade Diameter (Inches) Arbor Diameter 20 mm or 1 inch Application GP - General Purpose HA - High Speed Asphalt/ Green Concrete CC - Cured Concrete AG - Asphalt/Green Concrete BB - Brick & Block HB - Hard Brick BL - Block Quality/Cutting U - Ultra H - Heavy Duty A - Advantage Blade Thickness (in.001 inches) Abrasive Blades (10 Blades per Box) BLADE-ABRASIVE AB1220-ST, 10pk $64.00 BLADE-ABRASIVE AB1220-DI, 10pk $64.00 BLADE-ABRASIVE AB1220-CC, 10pk $64.00 * BLADE-ABRASIVE AB1220-AG, 10pk $64.00 BLADE-ABRASIVE AB1201-ST, 10pk $64.00 BLADE-ABRASIVE AB1201-DI, 10pk $64.00 BLADE-ABRASIVE AB1201-CC, 10pk $64.00 BLADE-ABRASIVE AB1201-AG, 10pk $64.00 BLADE-ABRASIVE AB1420-ST, 10pk $ BLADE-ABRASIVE AB1420-DI, 10pk $ BLADE-ABRASIVE AB1420-CC, 10pk $ BLADE-ABRASIVE AB1420-AG, 10pk $ BLADE-ABRASIVE AB1401-ST, 10pk $ BLADE-ABRASIVE AB1401-DI, 10pk $ BLADE-ABRASIVE AB1401-CC, 10pk $ BLADE-ABRASIVE AB1401-AG, 10pk $ * Discontinued item. Available while supplies last. For availability, please contact Customer Support at # ** For pricing, please contact Customer Support at # Page 26

29 DEMOLITION PRODUCTS & ACCESSORIES CUT-OFF SAW ACCESSORIES Diamond Blades (High Speed Wet/Dry Cutting - General Purpose) BLADE, DB1220-GPHD $ BLADE, DB1420-GPHD $ BLADE, DB1620-GPHD $ BLADE, DB1220-GPUD $ BLADE, DB1420-GPUD $ BLADE, DB1220-GPAD $ BLADE, DB1420-GPAD $ BLADE, DB1620-GPAD $ Diamond Blades (High Speed Wet/Dry Cutting - Split Segment - General Purpose) BLADE, DB1220-GPUD $ BLADE, DB1420-GPUD $ Diamond Blades (High Speed Wet/Dry Cutting - Asphalt/Green Concrete) BLADE, DB1201-HAHD $ BLADE, DB1401-HAHD $ Diamond Blades (High Speed Wet/Dry Cutting - Ductile Iron) BLADE-DB1420-HDHD $ BLADE-DB1420-HDAD $ Page 27

30 DEMOLITION PRODUCTS & ACCESSORIES FLOOR SAWS & ACCESSORIES BFS614-SAW $1, BFS614A-SAW $1, WATER TANK $ BRAKE COMPLETE $50.00 KIT-LIFTCAGE ASSEMBLY $90.00 BFS914-SAW $2, BFS914A-SAW $2, BFS1318A-SAW $3, WATER TANK (includes fittings) $ BRAKE COMPLETE $ BFS1318AS-SAW $4, BFS2020AS-SAW $6, WATER TANK $ WATER PUMP $ BFS1350AL-SAW $4, (w/cutmatic & water tank) BFS1350ALS-SAW $5, (w/cutmatic, auto pilot & water tank) Nomenclature Key for Floor Saws: B FS 9 14 A S Gas Floor Saw Engine HP 9HP 13HP 20HP Blade Guard 14" 18" 20" 50mm = 20" Engine A = Honda No designation = Wacker Neuson S = Self propelled No designation = Push Abrasive Blades (10 blades per box) * BLADE-ABRASIVE,PH1201-AG, 10pk $84.00 * BLADE-ABRASIVE,PH1201-CC, 10pk $84.00 BLADE-ABRASIVE,PH1401-AG, 10pk $ BLADE-ABRASIVE,PH1401-CC, 10pk $ BLADE-ABRASIVE,PH1401-AG, 10pk $ BLADE-ABRASIVE,PH1401-CC, 10pk $ * BLADE-ABRASIVE,PH1601-AG, 10pk $ * BLADE-ABRASIVE,PH1601-CC, 10pk $ * Discontinued item. Available while supplies last. For availability, please contact Customer Support at # Page 28

31 DEMOLITION PRODUCTS & ACCESSORIES FLOOR SAW ACCESSORIES Diamond Blades (Wet Cutting Cured Concrete, Heavy Duty) * BLADE, DB1201-CCHW $ BLADE, DB1201-CCHW $ * BLADE, DB1401-CCHW $ BLADE, DB1401-CCHW $ BLADE, DB1601-CCHD $ BLADE, DB1801-CCHW $ BLADE, DB2001-CCHD $ BLADE, DB2401-CCHW $1, * BLADE, DB3001-CCHD $2, * BLADE, DB3601-CCHD $2, Diamond Blades (Wet Cutting Cured Concrete, Ultra) * BLADE, DB1401-CCUW $ BLADE, DB1801-CCUW $1, * BLADE, DB2401-CCUW $1, * BLADE, DB2601-CCUW $2, * BLADE, DB3001-CCUW $2, * BLADE, DB3601-CCUW $3, Diamond Blades (Cured Concrete - Dry) BLADE, DB1201-CCHD $ BLADE, DB1401-CCHD $ Diamond Blades (Wet Cutting Asphalt, Heavy Duty) * BLADE, DB1401-AGHW $ BLADE, DB1401-AGHW $ BLADE, DB1801-AGHW $1, BLADE, DB2401-AGHW $1, * BLADE, DB2601-AGHW $1, Diamond Blades (Asphalt Cutting - Dry) BLADE, DB1201-AGHD $ BLADE, DB1401-AGHD $ Diamond Blades (Wet Cutting Asphalt Over Concrete, Heavy Duty) BLADE, DB1401-ACHW $ BLADE, DB1801-ACHW $1, * BLADE, DB2401-ACHW $1, Diamond Blades (Wet Cutting Green Concrete) BLADE, DB1201-AGHD $ BLADE, DB1401-AGHD $ BLADE, DB1801-AGHD $1, * BLADE, DB1201-AGUD $ * BLADE, DB1401-AGUD $ * BLADE, DB08 7/8-6/8-AGUD $ * Discontinued item. Available while supplies last. For availability, please contact Customer Support at # Page 29

32 DEMOLITION PRODUCTS & ACCESSORIES FLOOR SAW ACCESSORIES Diamond Blades (Masonry Wet/Dry Hard Brick Cutting) * BLADE, DB1401-HBUD $ * BLADE, DB2001-HBUD $ Diamond Blades (Masonry Wet/Dry Cutting-General Purpose) BLADE, DB1401-BBUD $ BLADE, DB2001-BBUD $1, Diamond Blades (Masonry Wet/Dry Block Cutting) * BLADE, DB1401-BLUD $ * BLADE, DB2001-BLUD $1, * Discontinued item. Available while supplies last. For availability, please contact Customer Support at # Page 30

33 UTILITY PRODUCTS & ACCESSORIES DEWATERING PUMPS PG2-PUMP $ PG2A-PUMP $ PG3-PUMP $ PG3A-PUMP $ Models without engine designation specified in nomenclature are equipped with a Wacker Neuson engine. Accessories for Dewatering Pumps STRAINER-SUCTION 2",PLASTIC $27.00 STRAINER-SUCTION 3",PLASTIC $30.00 STRAINER-PG $19.00 STRAINER-PG $25.00 CLAMP 2-3/8 NOM,T-BOLT $5.00 CLAMP 3-7/16 NOM,T-BOLT $6.00 COUPLING 2",HOSE SHANK,EXT.THD $8.00 COUPLING 2",HOSE SHANK,INT.THD $12.00 COUPLING 2",PLUG,INT.THD,Q.D $9.00 COUPLING 2",SOCKET,Q.D $21.00 COUPLING 2",HOSE ADAPTOR,Q.D $16.00 COUPLING 3",HOSE SHANK,EXT.THD $18.00 COUPLING 3",HOSE SHANK,INT.THD $23.00 COUPLING 3",PLUG,INT.THD,Q.D $20.00 COUPLING 3",SOCKET,Q.D $37.00 COUPLING 3",HOSE ADAPTOR,Q.D $23.00 HOSE 2"DISCHRGE,BULK,PER METER $6.00 HOSE 2"X 20',SUCTION $ HOSE 3"DISCHRGE,BULK,PER METER $8.00 HOSE 3"X 20',SUCTION $ * 15 Meters = 50 Feet Standard 2" QD Components (2) Pump Side Couplings (2) Hose Side Couplings (1) Suction Hose Coupling (strainer) (4) T-Bolt Clamps Standard 3" QD Components (2) Pump Side Couplings (2) Hose Side Couplings (1) Suction Hose Coupling (strainer) (4) T-Bolt Clamps Note: Components listed are the typical combination. (Not included with purchase, must be ordered separately.) Page 31

34 UTILITY PRODUCTS & ACCESSORIES DIAPHRAGM PUMPS PDT2-PUMP,DIAPHRAGM $2, PDT2A-PUMP,DIAPHRAGM $2, * PDI2A-PUMP,DIAPHRAGM $2, PDT3-PUMP,DIAPHRAGM $2, PDT3A-PUMP,DIAPHRAGM $2, PDI3A-PUMP,DIAPHRAGM $2, Models without engine designation specified in nomenclature are equipped with a Wacker Neuson engine. * Discontinued item. Available while supplies last. For availability, please contact Customer Support at # Accessories for Diaphragm Pumps STRAINER 2",FEMALE THD $15.00 STRAINER 3",FEMALE THD $23.00 CLAMP 2-3/8 NOM,T-BOLT $5.00 CLAMP 3-7/16 NOM,T-BOLT $6.00 COUPLING 2",HOSE SHANK,EXT.THD $8.00 COUPLING 2",HOSE SHANK,INT.THD $12.00 COUPLING 2",PLUG,INT.THD,Q.D $9.00 COUPLING 2",SOCKET,Q.D $21.00 COUPLING 2",HOSE ADAPTOR,Q.D $16.00 COUPLING 3",HOSE SHANK,EXT.THD $18.00 COUPLING 3",HOSE SHANK,INT.THD $23.00 COUPLING 3",PLUG,INT.THD,Q.D $20.00 COUPLING 3",SOCKET,Q.D $37.00 COUPLING 3",HOSE ADAPTOR,Q.D $23.00 ** HOSE 2"DISCHRGE,BULK,PER METER $6.00 HOSE 2"X 20',SUCTION $ ** HOSE 3"DISCHRGE,BULK,PER METER $8.00 HOSE 3"X 20',SUCTION $ ** 15 Meters = 50 Feet Standard 2" QD Components (2) Pump Side Couplings (2) Hose Side Couplings (1) Suction Hose Coupling (strainer) (4) T-Bolt Clamps Standard 3" QD Components (2) Pump Side Couplings (2) Hose Side Couplings (1) Suction Hose Coupling (strainer) (4) T-Bolt Clamps Note: Components listed are the typical combination. (Not included with purchase, must be ordered separately.) Page 32

35 UTILITY PRODUCTS & ACCESSORIES CENTRIFUGAL TRASH PUMPS PT2-PUMP $1, PT2A-PUMP $1, PT2H-PUMP $3, PT3-PUMP $1, PT3A-PUMP $1, PT3H-PUMP $3, PTS4V-PUMP $4, PT6LT PUMP, w/2" BALL HITCH (KIT) $19, PT6LT PUMP, w/2-5/16" BALL HITCH (KIT) $19, PT6LT PUMP, w/pintle HOOK ASSY (KIT) $19, PT6LS-PUMP, w/skid $18, Please call for availability. Nomenclature Key for Trash Pumps A = Honda H = Hatz V = Vanguard L = Lombardini Models without engine designation in nomenclature are equipped with a Wacker Neuson engine Accessories for Centrifugal Trash Pumps BATTERY-DRY,22NF2, PTS4V $ KIT-TRANSPORT WHEEL,PT2/A PUMPS $ KIT-TRANSPORT WHEEL,PT2H $ KIT-TRANSPORT WHEEL, ALL PT3 PUMPS $ CLAMP 2-3/8 NOM,T-BOLT $5.00 CLAMP 3-7/16 NOM,T-BOLT $6.00 CLAMP 4-1/2 NOM,T-BOLT $6.00 CLAMP 6-1/2"NOM,T-BOLT $6.00 COUPLING 2",HOSE SHANK,EXT.THD $8.00 COUPLING 2",HOSE SHANK,INT.THD $12.00 COUPLING 2",PLUG,INT.THD,Q.D $9.00 COUPLING 2",SOCKET,Q.D $21.00 COUPLING 2",HOSE ADAPTOR,Q.D $16.00 COUPLING 3",HOSE SHANK,EXT.THD $18.00 COUPLING 3",HOSE SHANK,INT.THD $23.00 COUPLING 3",PLUG,INT.THD,Q.D $20.00 COUPLING 3",SOCKET,Q.D $37.00 COUPLING 3",HOSE ADAPTOR,Q.D $23.00 COUPLING 4",HOSE SHANK,EXT.THD $29.00 COUPLING 4",HOSE SHANK,INT.THD $42.00 COUPLING 4",PLUG,INT.THD,Q.D $32.00 COUPLING 4",SOCKET,Q.D $51.00 COUPLING 4",HOSE ADAPTOR,Q.D $56.00 COUPLING 6",SOCKET,Q.D $ COUPLING 6",PLUG,INT.THD,Q.D $58.00 COUPLING 6",HOSE SHANK,Q.D $96.00 COUPLING 6",HOSE SHANK,EXT.THD $53.00 COUPLING 6",HOSE SHANK,INT.THD $51.00 Page 33

36 UTILITY PRODUCTS & ACCESSORIES CENTRIFUGAL TRASH PUMP ACCESSORIES Accessories for Centrifugal Trash Pumps (cont'd) * HOSE 2"DISCHRGE,BULK,PER METER $6.00 HOSE 2"X 20',SUCTION $ * HOSE 3"DISCHRGE,BULK,PER METER $8.00 HOSE 3"X 20',SUCTION $ * HOSE 4"DISCHRGE,BULK PER METER $11.00 HOSE 4"X 20',SUCTION $ * HOSE 6"DISCHRGE,BULK PER METER $17.00 HOSE 6"X 20',SUCTION $ STRAINER 2", STEEL, PLATED $19.00 STRAINER 2",FEMALE THD $15.00 STRAINER 3", STEEL, PLATED $25.00 STRAINER 3",FEMALE THD $23.00 STRAINER 6",FEMALE THD $ * 15 Meters = 50 Feet Standard 2" QD Components (2) Pump Side Couplings (2) Hose Side Couplings (1) Suction Hose Coupling (strainer) (4) T-Bolt Clamps Standard 3" QD Components (2) Pump Side Couplings (2) Hose Side Couplings (1) Suction Hose Coupling (strainer) (4) T-Bolt Clamps Standard 4" QD Components (2) Pump Side Couplings (2) Hose Side Couplings (1) Suction Hose Coupling (strainer) (4) T-Bolt Clamps Standard 6" QD Components (2) Pump Side Couplings (2) Hose Side Couplings (1) Suction Hose Coupling (strainer) (4) T-Bolt Clamps Note: Components listed are the typical combination. (Not included with purchase, must be ordered separately.) Page 34

37 UTILITY PRODUCTS & ACCESSORIES SUBMERSIBLE PUMPS (Single Phase) PST2 400 SUB. PUMP - 110V/60HZ, 1/2HP, 20' CORD $ PSTF2 400 SUB. PUMP - 110V/60HZ, 1/2HP, 20' CORD $ PS2 500 SUB. PUMP - 110V/60HZ, 2/3HP, 32' CORD $ PS2 500 SUB. PUMP - 220V/60HZ, 2/3HP, 32' CORD $ PSA2 500 SUB. PUMP - 110V/60HZ, 2/3HP, 32' CORD $ PS2 800 SUB. PUMP - 110V/60HZ, 1HP, 49' CORD $ PS2 800 SUB. PUMP - 220V/60HZ, 1HP, 49' CORD $ PSA2 800 SUB. PUMP- 220V/60HZ, 1HP, 49' CORD $ PSR1 500 SUB. PUMP - 110V/60HZ, 2/3HP, 32' CORD $ PSG2 500 SUB. PUMP - 110V/60HZ, 2/3HP, 32' CORD $ PST3 750 SUB. PUMP - 110V/60HZ, 1HP, 33' CORD $ PST3 750 SUB. PUMP - 220V/60HZ, 1HP, 33' CORD $ PSTF3 750 SUB. PUMP - 110V/60HZ, 1HP, 33' CORD $ PSTF3 750 SUB. PUMP - 220V/60HZ, 1HP, 33' CORD $ PS SUB. PUMP - 110V/60HZ, 2HP, 32' CORD $1, PS SUB. PUMP - 220V/60HZ, 2HP, 32' CORD $1, PSW SUB. PUMP - 110V/60HZ, 2HP, 32' CORD $1, PSW SUB. PUMP - 220V/60HZ, 2HP, 32' CORD $1, PS SUB. PUMP - 220V/60HZ, 3HP, 32' CORD $2, Plugs 110V = NEMA 5-15P 220V = No plug 2HP/3HP = No plug Accessories for Single Phase Submersible Pumps Standard FLOAT-110V, 13AMP RUN, 30' $ " QD Components (Item No & ) (1) Pump Side Couplings FLOAT-110V, 13AMP RUN, 30' $84.00 (1) Hose Side Couplings (Item No , , , ) FLOAT-220V, 15AMP RUN, 30' $89.00 (1) T-Bolt Clamps (Item No , , , , )) KIT-SAND, STIR EXTENSION $ Standard (Item No , , ) 3" QD Components KIT-RESIDUE, FLOOR SUCKER $53.00 (1) Pump Side Couplings (Item No only) CLAMP 2-3/8 NOM,T-BOLT $5.00 (1) Hose Side Couplings (1) T-Bolt Clamps CLAMP 3-7/16 NOM,T-BOLT $6.00 COUPLING 2",HOSE SHANK,EXT.THD $8.00 Components listed are the typical COUPLING 2",HOSE SHANK,INT.THD $12.00 combination. (Must be purchased COUPLING 2",PLUG,INT.THD,Q.D $9.00 separately.) COUPLING 2",SOCKET,Q.D $21.00 COUPLING 2",HOSE ADAPTOR,Q.D $16.00 COUPLING 3",HOSE SHANK,EXT.THD $18.00 COUPLING 3",HOSE SHANK,INT.THD $23.00 COUPLING 3",PLUG,INT.THD,Q.D $20.00 COUPLING 3",SOCKET,Q.D $37.00 COUPLING 3",HOSE ADAPTOR,Q.D $23.00 COUPLING 2", NPT MALE $24.00 (Item No only) * HOSE 2"DISCHRGE,BULK,PER METER $6.00 * HOSE 3"DISCHRGE,BULK,PER METER $8.00 * 15 Meters = 50 Feet Page 35

38 UTILITY PRODUCTS & ACCESSORIES SUBMERSIBLE PUMPS (Three Phase) PS SUB. PUMP - 220V/60HZ, 2HP $1, PS SUB. PUMP - 440V/60HZ, 2HP $1, PS SUB. PUMP - 220V/60HZ, 3HP $2, PS SUB. PUMP - 440V/60HZ, 3HP $2, PS SUB. PUMP - 220V/60HZ, 5HP $2, PS SUB. PUMP - 440V/60HZ, 5HP $2, PS SUB. PUMP - 220V/60HZ, 7.5HP $3, PS SUB. PUMP - 440V/60HZ, 7.5HP $3, PS SUB. PUMP - 220V/60HZ, 7.5HP $3, PS SUB. PUMP - 440V/60HZ, 7.5HP $3, PS4 7503HH SUB. PUMP - 220V/60HZ, 10HP $4, PS4 7503HH SUB. PUMP - 440V/60HZ, 10HP $4, PS HH SUB. PUMP - 220V/60HZ, 15HP $5, PS HH SUB. PUMP - 440V/60HZ, 15HP $5, FLOAT 125/250V,3-PHASE CONTROL $59.00 (2 required per control box) All 3 phase submersible pump models have a 50' cord and no plugs. 3 Phase Control Panels, Automatic BOX-CONTROL 230V (Item , 9129, 9135) $1, BOX-CONTROL 230V (Item , 9144) $1, BOX-CONTROL 230V (Item , 9153) $1, BOX-CONTROL 460V $1, (Item No , , , , , ) BOX-CONTROL 460V (Item ) $1, Phase Control Panels, Manual CONTROL PANEL, 3 PHASE MANUAL AMP $ (Item No , , ) CONTROL PANEL, 3 PHASE MANUAL 9-14 AMP $ (Item No , , , ) CONTROL PANEL, 3 PHASE MANUAL AMP $ (Item No , , ) Performance Conversion Kits, 3 Phase Models KIT-HIGH FLOW $ (For use on model PS2 1503) KIT-HIGH HEAD $ (For use on model PS3 2203) KIT-HIGH HEAD $ (For use on model PS3 3703) KIT-HIGH FLOW $ (For use on model PS3 3703) KIT-HIGH FLOW $ (For use on model PS4 7503HH) KIT-HIGH FLOW $ (For use on model PS HH) High Flow Kits Include: Smaller diameter & longer vane impeller, new wear plate, shim, gasket & discharge fitting. High Head Kits Include: Larger diameter & shorter vane impeller, new wear plate, shim, gasket & discharge fitting. Page 36

39 UTILITY PRODUCTS & ACCESSORIES SUBMERSIBLE PUMP (Three Phase) - ACCESSORIES Accessories for All Three Phase Submersible Pumps CLAMP 2-3/8 NOM,T-BOLT $5.00 CLAMP 3-7/16 NOM,T-BOLT $6.00 CLAMP 4-1/2 NOM,T-BOLT $6.00 COUPLING 2",HOSE SHANK,EXT.THD $8.00 COUPLING 2",HOSE SHANK,INT.THD $12.00 COUPLING 2",PLUG,INT.THD,Q.D $9.00 COUPLING 2",SOCKET,Q.D $21.00 COUPLING 2",HOSE ADAPTOR,Q.D $16.00 COUPLING 3",HOSE SHANK,EXT.THD $18.00 COUPLING 3",HOSE SHANK,INT.THD $23.00 COUPLING 3",PLUG,INT.THD,Q.D $20.00 COUPLING 3",SOCKET,Q.D $37.00 COUPLING 3",HOSE ADAPTOR,Q.D $23.00 COUPLING 4",HOSE SHANK,EXT.THD $29.00 COUPLING 4",HOSE SHANK,INT.THD $42.00 COUPLING 4",PLUG,INT.THD,Q.D $32.00 COUPLING 4",SOCKET,Q.D $51.00 COUPLING 4",HOSE ADAPTOR,Q.D $56.00 * HOSE 2"DISCHARGE,BULK,PER METER $6.00 * HOSE 3"DISCHARGE,BULK,PER METER $8.00 * HOSE 4"DISCHARGE,BULK PER METER $11.00 * 15 Meters = 50 Feet PS & PS Models Available for Conversion to 6" Discharge FITTING-DISCHARGE 6", PS $ FITTING-DISCHARGE 6", PS $ Accessories for 6" Discharge CLAMP 6-1/2"NOM,T-BOLT $6.00 COUPLING 6",SOCKET,Q.D $ COUPLING 6",PLUG,INT.THD,Q.D $58.00 COUPLING 6",HOSE SHANK,Q.D $96.00 COUPLING 6",HOSE SHANK,EXT.THD $53.00 COUPLING 6",HOSE SHANK,INT.THD $51.00 * HOSE 6"DISCHARGE,BULK PER METER $17.00 * 15 Meters = 50 Feet Standard 2" QD Components (1) Pump Side Coupling (1) Hose Side Coupling (1) T-Bolt Clamp Standard 3" QD Components (1) Pump Side Coupling (1) Hose Side Coupling (1) T-Bolt Clamp Standard 4" QD Components (1) Pump Side Coupling (1) Hose Side Coupling (1) T-Bolt Clamp Standard 6" QD Components (1) Pump Side Coupling (1) Hose Side Coupling (1) T-Bolt Clamp Note: Components listed are the typical combination. (Not included with purchase, must be ordered separately.) Page 37

40 UTILITY PRODUCTS & ACCESSORIES VALUE PORTABLE GENERATORS Value Portable Generators (Not for sale in CA) GV2500A VALUE GENERATOR $1, GV3800A VALUE GENERATOR $1, GV5600A VALUE GENERATOR $2, GV6600A VALUE GENERATOR $2, Value Portable Generators, CARB (For sale in CA) GV3800A VALUE GENERATOR, CARB $1, GV5600A VALUE GENERATOR, CARB $2, GV6600A VALUE GENERATOR, CARB $2, Accessories for Value Portable Generators KIT-TRANSPORT, WHEEL W/LIFT BAIL $ SPARK ARRESTOR, GV2500A $18.00 SPARK ARRESTOR, GV3800A-GV6600A $20.00 PORTABLE GENERATOR DISPLAY STAND * Call for price * For pricing, please contact Customer Support at # Page 38

41 UTILITY PRODUCTS & ACCESSORIES PREMIUM PORTABLE GENERATORS Premium Portable Generators (Not for sale in CA) GP2500A GENERATOR, 120V DUPLEX GFI $1, GP2600 GENERATOR, 120V DUPLEX GFI $1, GP3800A GENERATOR $2, GP3800A GENERATOR, W/WHEEL KIT $2, GP4000 GENERATOR $2, GP5600A GENERATOR $2, GP5600A GENERATOR, W/WHEEL KIT $2, GPS5600A GENERATOR $2, GP6600A GENERATOR $2, GP6600A GENERATOR, W/WHEEL KIT $3, GPS6600A GENERATOR $3, GPS9700V GENERATOR, 120V DUPLEX GFI $4, All units come standard with central GFI, unless otherwise indicated. Model Nomenclature Key for Portable Generators A = Honda V = Vanguard Models without engine designation in nomenclature are equipped with a Wacker Neuson engine Premium Portable Generators, CARB (For sale in CA) GP2600 GENERATOR, CARB, 120V DUPLEX GFI $1, GP3800A GENERATOR, CARB $2, GP3800A GENERATOR, CARB, W/WHEEL KIT $2, GP5600A GENERATOR, CARB $2, GP5600A GENERATOR, CARB, W/WHEEL KIT $2, GPS5600A GENERATOR, CARB $3, GP6600A GENERATOR, CARB $3, GP6600A GENERATOR, CARB, W/WHEEL KIT $3, GPS6600A GENERATOR, CARB $3, All units come standard with central GFI, unless otherwise indicated. Accessories for Premium Portable Generators KIT-TRANSPORT $ (GP3800A, GP4000, GP/S5600A & GP/S6600A models) KIT-TRANSPORT $ (GPS9700V only) PORTABLE GENERATOR DISPLAY STAND * Call for price * For pricing, please contact Customer Support at # Page 39

42 UTILITY PRODUCTS & ACCESSORIES PREMIUM INVERTER PORTABLE GENERATORS Premium Inverter Portable Generators (Not for sale in CA) GPi1700 GENERATOR, INVERTER $1, GPi3200 GENERATOR, INVERTER $2, GPi3200QS GENERATOR, INVERTER $2, GPi4300 GENERATOR, INVERTER $3, GPi4300QS GENERATOR, INVERTER $3, Page 40

43 UTILITY PRODUCTS & ACCESSORIES MOBILE GENERATORS Standard Mobile Generator Models G14 GENERATOR, SKID BASE $16, (13.5kW prime (single phase), Kubota Tier IVi, 21g tank, 63dBA) MGT TRAILER, 2" BALL HITCH $1, G25 GENERATOR, SKID BASE $20, (20kW/25kVA prime, Isuzu Tier IVi, 60g tank, 65dBA) MGT1 TRAILER, 3500LB AXLE, 2" BALL HITCH $1, MGT1S TRAILER, 3500LB AXLE, 2" BALL HITCH $2, MGT1E TRAILER, 3500LB AXLE, 2" BALL HITCH $2, MGT1 TRAILER, PINTLE HITCH $1, MGT1E TRAILER, PINTLE HITCH $2, G50 GENERATOR, SKID BASE $29, (38kW/50kVA prime, Deere Tier II (EPA flex exemption), 89g tank, 66dBA) G70 GENERATOR, SKID BASE $34, (58kW/72kVA prime, Deere Tier III, 89g tank, 66dBA) MGT2S TRAILER, 6000LB AXLE $3, MGT2E TRAILER, 6000LB AXLE $3, MGT2SD TRAILER, DUAL AXLE, 3500LB EA $4, MGT2ED TRAILER, DUAL AXLE, 3500LB EA $4, MGT2SD TRAILER, W/ALUMINUM FENDERS $5, MGT2ED TRAILER, W/ALUMINUM FENDERS $5, G100 GENERATOR, SKID BASE $46, (80kW/100kVA prime, Deere Tier III, 209g tank, 68dBA) G120 GENERATOR, SKID BASE $49, (96kW/120kVA prime, Deere Tier III, 209g tank, 70.6dBA) MGT3.1S TRAILER, DUAL AXLE, 5200LB EA $6, MGT3.1E TRAILER, DUAL AXLE, 5200LB EA $6, G150 GENERATOR, SKID BASE $59, (120kW/150kVA prime, Deere Tier III, 300g tank, 68dBA) G180 GENERATOR, SKID BASE $72, (143kW/180kVA prime, Deere Tier III, 300g tank, 70dBA) G240 GENERATOR, SKID BASE $90, (191kW/240kVA prime, Deere Tier III, 400g tank, 72dBA) MGT4S TRAILER, DUAL AXLE, 6000LB EA $8, MGT4E TRAILER, DUAL AXLE, 6000LB EA $8, All trailers come equipped with a 3" pintle hitch, unless otherwise specified. All Wacker Neuson Mobile Generators are 2010 EPA emissions compliant. Page 41

44 UTILITY PRODUCTS & ACCESSORIES MOBILE GENERATORS - ERT MODELS Extended Run Tank Mobile Generator Models G25 GENERATOR, EXTENDED RUN TANK, SKID $21, (135 gallon, 115% fluid containment) MGT2S TRAILER, 6000LB AXLE $3, MGT2E TRAILER, 6000LB AXLE $3, MGT2SD TRAILER, DUAL AXLE, 3500LB EA $4, MGT2ED TRAILER, DUAL AXLE, 3500LB EA $4, MGT2SD TRAILER, W/ALUMINUM FENDERS $5, MGT2ED TRAILER, W/ALUMINUM FENDERS $5, G50 GENERATOR, EXTENDED RUN TANK, SKID $32, (331 gallon, 115% fluid containment) G70 GENERATOR, EXTENDED RUN TANK, SKID $37, (331 gallon, 115% fluid containment) MGT3.1S TRAILER, DUAL AXLE, 5200LB EA $6, MGT3.1E TRAILER, DUAL AXLE, 5200LB EA $6, Accessories / Dealer Installed Options (for all standard and extended run tank models) BATTERY CHARGER, 2AMP, 3 STAGE, SM/MED $ (G25 - G70) BATTERY CHARGER, 2AMP, 3 STAGE, MED/LG $ (G100 - G120) BATTERY CHARGER, 2AMP, 3 STAGE, LG $ (G150 - G240) ELECTRONIC GOVERNOR, SML $ (G25 Tier 4i model only) ELECTRONIC GOVERNOR, MED $ (G50 only) ENGINE BLOCK HEATER $83.00 (Isuzu, G25, non-thermostat, 400 watt) ENGINE BLOCK HEATER $ (John Deere, G50-G240, non-thermostat, 1000 watt) COUPLING,PINTLE EYE, 3" $65.00 (For MGT1S trailers; standard on MGT2 trailers) HITCH 3" PINTLE ASSY, W/ADJ HEIGHT CHANNEL $ (MGT1 and MGT1E trailers) HITCH-2" BALL $ (MGT1S & all MGT2 trailers) HITCH 2-5/16" BALL $ (MGT1S & all MGT2 trailers) Above options must be ordered separately and are not installed at the factory. Page 42

45 UTILITY PRODUCTS & ACCESSORIES MOBILE GENERATOR FACTORY INSTALLED OPTION SELECTION GUIDE Wacker Neuson is pleased to offer a custom line of mobile generators manufactured to your specific requirements with factory installed options. All installed options are fully warranted for 2 years. When ordering a WACKER NEUSON CUSTOM MOBILE GENERATOR, please select and order one of the "Custom Mobile Generator" models. Then select from the "Factory Installed Options" list to custom design the mobile generator that meets your specific needs. PLEASE NOTE: CUSTOM MOBILE GENERATORS ARE SUBJECT TO A MINIMUM 25% CANCELLATION CHARGE. Page 43

46 UTILITY PRODUCTS & ACCESSORIES MOBILE GENERATORS - CUSTOM MODELS Custom Mobile Generator Models G25-GENERATOR, SKID BASE, CUSTOM $20, G50-GENERATOR, SKID BASE, CUSTOM $29, G70-GENERATOR, SKID BASE, CUSTOM $34, G100-GENERATOR, SKID BASE, CUSTOM $46, G120-GENERATOR, SKID BASE, CUSTOM $49, G150-GENERATOR, SKID BASE, CUSTOM $59, G180-GENERATOR, SKID BASE, CUSTOM $72, G240-GENERATOR, SKID BASE, CUSTOM $90, Factory Installed Options, G25 BATTERY CHARGER, 2AMP, 3 STAGE $ BATTERY DISCONNECT $ CAM LOCK, SML (1 set of 5, 400amp lugs) $1, CONTAINMENT SKID (115%), SML $ EXTENDED RUN TANK, 135 GALLON $1, ELECTRONIC GOVERNOR, SML $ ENGINE BLOCK HEATER, 400 WATT, SML $ LCD STRIP HEATER, SML $ LOW COOLANT SHUTDOWN, SML $ RADIATOR SHUTTER, SML $2, Factory Installed Options, G50 BATTERY CHARGER, 2AMP, 3 STAGE $ BATTERY DISCONNECT $ CAM LOCK, MED (1 set of 5, 400amp lugs) $1, CONTAINMENT SKID (115%), MED $ EXTENDED RUN TANK, 331 GALLON $2, ELECTRONIC GOVERNOR, MED $ ENGINE BLOCK HEATER, 1000 WATT $ LCD STRIP HEATER, MED $ LOW COOLANT SHUTDOWN, MED $ LUBE LEVEL MAINTAINER, MED $ RADIATOR SHUTTER, MED $2, Factory Installed Options, G70 BATTERY CHARGER, 2AMP, 3 STAGE $ BATTERY DISCONNECT $ CAM LOCK, MED (1 set of 5, 400amp lugs) $1, CONTAINMENT SKID (115%), MED $ EXTENDED RUN TANK, 331 GALLON $2, ENGINE BLOCK HEATER, 1000 WATT $ LCD STRIP HEATER, MED $ LOW COOLANT SHUTDOWN, MED $ LUBE LEVEL MAINTAINER, MED $ RADIATOR SHUTTER, MED $2, Page 44

47 UTILITY PRODUCTS & ACCESSORIES MOBILE GENERATORS - CUSTOM FACTORY INSTALLED OPTIONS Factory Installed Options, G100 BATTERY CHARGER, 2AMP, 3 STAGE $ BATTERY DISCONNECT $ ENGINE BLOCK HEATER, 1000 WATT $ CCV HEATER $ LCD STRIP HEATER, LRG $ LOW COOLANT SHUTDOWN, LRG $ LUBE LEVEL MAINTAINER, MED/LRG $ RADIATOR SHUTTER, MED/LRG $2, Factory Installed Options, G120 BATTERY CHARGER, 2AMP, 3 STAGE $ BATTERY DISCONNECT $ CCV HEATER $ ENGINE BLOCK HEATER, 1000 WATT $ LCD STRIP HEATER, LRG $ LOW COOLANT SHUTDOWN, LRG $ LUBE LEVEL MAINTAINER, MED/LRG $ RADIATOR SHUTTER, MED/LRG $2, Factory Installed Options, G150 BATTERY CHARGER, 2AMP, 3 STAGE $ BATTERY DISCONNECT $ CCV HEATER $ ENGINE BLOCK HEATER, 1000 WATT $ LCD STRIP HEATER, LRG $ LOW COOLANT SHUTDOWN, LRG $ LUBE LEVEL MAINTAINER, LRG $ RADIATOR SHUTTER, LRG $3, Factory Installed Options, G180 BATTERY CHARGER, 2AMP, 3 STAGE $ BATTERY DISCONNECT $ CCV HEATER $ ENGINE BLOCK HEATER, 1000 WATT $ LCD STRIP HEATER, LRG $ LOW COOLANT SHUTDOWN, LRG $ LUBE LEVEL MAINTAINER, LRG $ RADIATOR SHUTTER, LRG $3, Factory Installed Options, G240 BATTERY CHARGER, 2AMP, 3 STAGE $ BATTERY DISCONNECT $ CCV HEATER $ ENGINE BLOCK HEATER, 1000 WATT $ LCD STRIP HEATER, LRG $ LOW COOLANT SHUTDOWN, LRG $ LUBE LEVEL MAINTAINER, LRG $ RADIATOR SHUTTER, XLRG $3, To calculate the total price for your Custom Mobile Generator, add the List Price of the Custom Generator model, plus all Factory Installed Options and apply your appropriate discount. Page 45

48 UTILITY PRODUCTS & ACCESSORIES MOBILE GENERATORS - COLD WEATHER MODELS Cold Weather Mobile Generator Models G25 GENERATOR, COLD WEATHER $24, G50 GENERATOR, COLD WEATHER $34, G70 GENERATOR, COLD WEATHER $39, G100 GENERATOR, COLD WEATHER $51, G120 GENERATOR, COLD WEATHER $53, G150 GENERATOR, COLD WEATHER $65, G180 GENERATOR, COLD WEATHER $79, G240 GENERATOR, COLD WEATHER $98, Cold Weather package includes the following factory installed options: * Temperature Activated Shutters * Electronic Governor * LCD Strip Heater * Lube Level Maintainer with Low Oil Shutdown (not available on G25) * Low Coolant Shutdown, Solid State * Block Heater * 115% Fluid Containment * Lockable Battery Disconnect * 1000 CCA Battery Page 46

49 UTILITY PRODUCTS & ACCESSORIES LIGHT BALLOONS & LIGHT TOWERS Light Balloons LB1 LIGHT BALLOON, 120V $3, Includes: ballast, balloon, and tripod LBA1 LIGHT BALLOON, 120V $2, Includes: ballast and balloon only TRIPOD $1, Light Towers, Narrow Body LTN6L LIGHT TOWER, 60HZ, LOMBARDINI TIER IV $11, LTN6L LIGHT TOWER, W/ 120/240V OUTLET $11, LTN6L-P LIGHT TOWER, W/ POWER WINCH $12, LTN6C LIGHT TOWER, 60HZ, CATERPILLAR TIER IV $13, LTN6C LIGHT TOWER, W/ 120/240V OUTLET $13, LTN6C-P LIGHT TOWER, W/ POWER WINCH $14, Racked units are available for container shipments. For details, please contact Customer Support at # Accessories / Dealer Installed Options KIT-HITCH, 2.5" PINTLE ASSEMBLY $68.00 KIT-HITCH, COMBINATION 2.5" PINTLE/2" BALL $ KIT-HITCH, 3" PINTLE, HEIGHT ADJUSTABLE $ Factory Installed Options PAINT-CUSTOM ** Call for price ** For pricing and availability, please contact Customer Support at # Light Towers, Wide Body LTW6K LIGHT TOWER, 60HZ, KUBOTA TIER IV $16, LTW8K LIGHT TOWER, 60HZ, KUBOTA TIER IV $17, LTW20Z-1 LIGHT TOWER, 60HZ, ISUZU TIER IVi $24, * See following page for Custom Wide Body Light Towers. Page 47

50 UTILITY PRODUCTS & ACCESSORIES LIGHT TOWER FACTORY INSTALLED OPTION SELECTION GUIDE Wacker Neuson is pleased to offer a custom line of wide body light towers manufactured to your specific requirements with factory installed options. All installed options are fully warranted for 2 years. When ordering a WACKER NEUSON CUSTOM LIGHT TOWER, please select and order one of the "Custom Wide Body Light Tower" models. Then select from the "Factory Installed Options" list to custom design the light tower that meets your specific needs. PLEASE NOTE: CUSTOM LIGHT TOWERS ARE SUBJECT TO A MINIMUM 25% CANCELLATION CHARGE. Page 48