Auger Monster. Features & Benefits Dual Shafted Grinder. Modular Headworks System. The Only One That s All-in-One.

Transcription

1 M-07 The Only One That s ll-in-one uger Monster Modular Headworks System Overview The uger Monster is a robust and affordable wastewater and life is easier for operators and managers. - or Channel Monster grinder shreds clumps of rags and long stringy material. Next, solids are captured by a perforated plate screen and removed by a rotating auger. s solids are removed, dual wash water zones clean-off fecal material. The rotating auger then conveys solids to the discharge point where the integrated compactor (optional) squeezes out water before depositing the cleaned and dried material into a dumpster. The cleaner, more compact discharge keeps odors to a minimum and lowers disposal costs, as less water and fecal material are sent to the ith the uger Monster, wastewater screening couldn t get any easier it s the only one that s all-inone! uger pivots and swivels out of the channel a JC xclusive! Features & Benefits ual Shafted Grinder Spiral Lifting Screw into the channel through a perforated screen Cleaner Screenings ischarge fecal material for cleaner discharge and reduced odors Modular Headworks System dewatering technology asy ccess, Pivoted uger servicing or removal brush and auger conveyor to deck level for inspection utomated PLC Monitoring and Controls solids removal and operating life even if electronics are disabled

2 Operation 1) Solids and trash suspended and conveyed in the flow enter the Channel Monster section. 4 2) Solids are captured on the rotating drums (if included) and moved into the central cutter stack for size reduction. ven small solids, such as paper and cotton products, are captured and macerated. 3) Ground solids enter the perforated screening zone and are lifted out by the inclined auger. High-pressure wash water cleans the solids and removes the soft organics, flushing them back into the flow. 3 4) ashed screenings are conveyed to deck level, then compacted (optional), dewatered and deposited into a dumpster or a bagging system (optional). 2 1 Cleaner, More Compact ischarge uger Monster discharge is cleaner, drier and more compact. The uger Monster has become a favorite among wastewater operators and managers since it makes the headworks area cleaner, less time consuming and less expensive to operate. Materials of Construction Replaceable auger brush keeps perforated screen clean and helps transport solids. Channel Frame: Standard 304 stainless steel Cutters and Spacers: 4130 heat treated alloy steel, surface ground for uniformity and throughhardened to a minimum Rockwell C Shafts: 4140 heat treated hexagonal steel nd Housings and Covers: Cast from STM uctile Iron Seal Faces: Tungsten Carbide / Tungsten Carbide lastomers: Buna-N uger System: 304 Stainless steel casings with alloy steel screw

3 uger Monster 1.5 k TFC auger motor. Iersible and other electric type motors are optional. Minimum channel depth from 660 and up - based on frame height. Shown with optional Screenings asher Monster. Model L 1596 ischarge B C Pivot Lift Point Spray ash System Inlet 25 NPT Ultrasonic Level Pivot Support 35º Ultrasonic Level Influent Model - Min. Channel idth - Flow Capacity m 3 /h L L L L L L Measurements based on 480 unit. 170 and 285 options also available The System That s MBR Friendly F vailable Transport Lengths G vailable Pivot Locations Measurements apply to L, C and G models

4 uger Monster 1.5 k TFC auger motor. Iersible and other electric type motors are optional. 3.7 k grinder motor k drum motor. Minimum channel depth from 660 and up - based on frame height. 480 unit shown. 170 and 285 options also available. Flow based on optimum channel conditions. Please consult factory for final analysis of application and flow rate. Model C 1596 Height ischarge Pivot Support 35º F G Pivot Lift Point Spray ash System Inlet 25 NPT Ultrasonic Level C B Ultrasonic Level Influent 130 Min. Channel idth - Flow Capacity m 3 /h Model B C C C C C C C ith frame as shown. 610 min. channel width available using grinder-only frame. uger discharge Two auger conveyors converge uger Monsters and cross conveyor

5 uger Monster 1.5 k TFC auger motor. Iersible and other electric type motors are optional. 3.7 k grinder motor. Minimum channel depth from 660 and up - based on frame height. 285 unit shown. 170 and 480 options also available. Flow based on optimum channel conditions. Please consult factory for final analysis of application and flow rate. Model G 1596 Height ischarge Pivot Support 35º F G Pivot Lift Point Spray ash System Inlet 25 NPT Ultrasonic Level C B Ultrasonic Level Influent 105 Min. Channel idth* - Model B C G G G G G G *ith frame as shown. 406 min. channel width available using grinder-only frame and 285 auger. 305 min. channel width available using grinder-only frame and 170 auger. Max Flow m 3 /h ischarge into bag uger Monsters discharging into a horizontal conveyor Flow from grinder to auger

6 M-07 uger Monster Options Screen Sizes Conveyor Options Compaction zone on transport and disposal fees Conveyor ual Shafted Grinder requirements Grinder Option Grinder Option Compaction zone Channel Monster Option lectric motor JC exclusive: high-efficiency iersible motor Motors xtended Motor Shaft increments. Overflow Bar Screens prevent solids from passing during an High-tech Controllers steel; NM-4x 316 stainless; NM-7 explosion proof operation of the cutter stack and drum ischarge Bagger discharge chute the ring and ties it off Cold eather System prevent freezing climates building or covering Hydraulic motor xtended shaft Bagger Blanket Headquarters 290 Paularino ve. Costa Mesa, C US Phone: Fax: jwce@jwce.com JC nvironmental. United States patents may apply: 4,919,346; 5,060,872; 5,320,286; 5,333,801; 5,354,004; 5,478,020; 5,505,388; 5,593,100; 6,176,443; 6,332,984; 7,073,433; 7,080,650; 7,081,171; 7,086,405; R37,349; R37,550. dditional and foreign patents are pending (M-07-4)