circo PLUS wall-mounted

Transcription

1 circo PLUS wall-mounted Distinctively elegant vertical radiators

2 Circo Plus all-mounted Dimensions Product code: CIP C D E G1/2" air vent G 1/8 76 C H D E G1/2" Connections 4 5 Standard connection MM Top end connection 45 or 54 (1 number > flow) hen ordering a top end connection, no insert pipe should be ordered. Air vents should be positioned on the central heating pipes. Order code: Specify code 45 or 54 instead of MM - There is no extra charge. To guarantee the output of the Circo Plus and to limit the pressure drop, Jaga recommends the use of tube diameters 16/2, 18/1 or 18/2. M M All dimensions are shown in millimetres

3 Outputs Outputs in watts at 75/65/20 C & 55/45/20 C, in accordance with EN442 code height width colour connection Order code: CIP /MM (Example order code shown is for a 10mm high radiator, 270mm wide) Height idth > Supplied as Standard 10 75/65/ /45/ /65/ /45/ /65/ /45/ /65/ /45/ /65/ H Colours: 001 Sandblast grey metallic or 333 traffic white Circo Plus wall model with central connection MM underneath 2 chrome-plated air vents G 1/8 Side panel 55/45/ Pressure drop eight & water content Pressure drop mk mce ms mc bar kpa eight in kg Height ater flow in kg/h ater content in litre Height All dimensions are shown in millimetres

4 H hen ordering a top end connection, veneer no insert pipe should Standard delivery : Table in beech - Circo all mounted model with be ordered. Air vents should be central connection MM underneath CODE positioned on the Type central heating - wall fixing - 2 chrome-plated air M Mvents G 1/8 Table in beech pipes. Standard delivery : veneer Options Circo ø Circo all mounted model with Standard colours: central connection MM underneath Circo ø 310 sandblast grey metallic CODE Circo Type - wall fixing ø 340 white 301(RAL 9010 satin) - 2 chrome-plated Table Table in air beech vents G 1/8 white 333(RAL 9016 satin) veneerlarge shelf in beech veneer Circo ø 270 Large Table shelf in beech veneer Standard colours: Circo ø sandblast grey metallic M M CODE Type 170 Option: Circo ø guard white 301(RAL 9010 satin) min. 100 mm - white 333(RAL 9016 satin) ith guard 230 mm Large shelf in beech veneer Circo ø 270 D ø D Circo ø 310 Large shelf CODE Circo Type ø 340 Large shelf Table ø Diameter Ø 278mm Small 313mm shelf in beech mm code height length colour conn. veneer Circo ø 270 Diameter Ø 278mm mm mm Ø Ø Order 278 code: Order code: Order code: Circo ø 310 Ø Order code: Order code: Order code: CODE:CIR XXX /MM CODE Circo Type ø Position 730 flow 0 and return pipe D Circo ø 270 D code height D length 500 colour550 conn. 600 Small shelf in beech veneer 46 CODE:CIR Table Small shelf Circo ø 310 Large 270 shelf XXX /MM Small shelf E CODE Circo E Type ø Towel rail chrome-plated Circo aluminium ø Circo ø CODE Type D D Circo ø 340 D /2" Small shelf in beech veneer G1/2" Towel rail chrome-plated aluminium Large Towel rail Circo ø 270 Small shelf Towel rail chrome-plated aluminium Towel rail shelf G1/2" Circo ø ion sets Ø 278 ith connection sets CODE Circo ith Type ø 340 connection sets Note: flow and return can be reordered Hat rack chrome-plated aluminium Circo ø D Circo ø 310 D D CODE Type " Circo ø Small Towel Hat shelf rack Hat rack Diameter rail 278mm Hat 313mm rack chrome-plated 348mm Circo aluminium ø 270 Diameter 278mm 313mm 348mm Ø Ø Ø Order code: Order 348 sets code: 100Order code: Circo ø 310 Ø Order code: Order code: Order code: CODE Circo Type ø D Connection set with guard Circo ø (colour 270 to match radiator) D D Circo ø Towel CODE Ø TO PIPE Hat rack rail colour Circo ø fill in sleeve coupling sets Ø Connection COIG.28L.D.3... set with guard (colour to match radiator) D COIG.28L.DC Guard DC TO PIPE COIG.31L.D.3... CODE colour Ø fill in sleeve coupling D Hat rack chrome-plated 253 COIG.31L.DC.3... aluminium match radiator) COIG.28L.D D Hat rack COIG.34L.D COIG.28L.DC TO PIPE COIG.34L.DC Guard DC Thermostatic Ø 278 head COIG.31L.D Remark: COIG.31L.DC.3... For flow right (set 44), R instead of L. match radiator) D Ex. COIG.34L.D.3... COIG.28R.D Guard DC D TO 221 PIPE COIG.34L.DC Remark: For flow right (set 44), R instead of L. match radiator) D Diameter 278mm Ex. 313mm COIG.28R.D mm... Flow left Flow right Guard Ø DC TO Order PIPE code: Order code: Order code: Thermostatic head Price incl. thermostatic valve, lockshield and sleeve couplings of L. D 427 For 427 connection to the 493 wall: order 2 curves. Flow left Flow right Guard DC ATTENTION: floorboards need to be removed for the guard Price incl. thermostatic valve, lockshield and sleeve couplings. of L. Flow left Flow right For connection to the wall: order 2 curves. 43 d and sleeve couplings. of L. es. Flow left oved for the guard. d and sleeve couplings. 43 es. Flow left 44 Flow right 44 Flow right ATTENTION: floorboards need to be removed for the guard. oved for the guard. d and sleeve couplings. es. oved for the guard. All dimensions are shown in millimetres

5 Connection Sets The order code of the connection set will be completed with the sleeve coupling code Set 31 For connection to the wall CODE.M2.M.1... white CODE.M2.MC.1... chrome CODE.M2.MB.1... black Set 32 For connection to the floor Deco angled lockshield Deco straight lockshield Deco angled manual valve Thermostatic heads D Chrome/ hite DC CODE.MF2.M.1... CODE.MF2.MC.1... white chrome Deco straight manual valve Chrome CODE.MF2.MB.1... black Set 33 For connection to the wall Deco angled lockshield CODE.J2.D.1... CODE.J2.DC.1... Deco angled thermostatic valve Thermostatic head Set 34 For connection to the floor Deco straight lockshield Deco straight thermostatic valve CODE.JF2.D.1... CODE.JF2.DC.1... Set 35 For connection to the wall CODE.JH2.D.1... CODE.JH2.DC.1... Double angled lockshield Double angled thermostatic valve

6 Set 41 For connection to the wall CODE.P3.D.1... CODE.P3.DC.1... Deco-Pro angled valve 50 Thermostatic head Set 42 For connection to the floor CODE.PF3.D.1... CODE.PF3.DC.1... Deco-Pro straight valve 50 Thermostatic head Sleeve Couplings Included in the price of the connection sets For Jaga valve - M24 For flexible steel or copper tube For synthetic tube Tube Ø / / / / / /1 Deco Single point valve angled For tube 15/1 only Deco Single point valve straight For tube 18/1 only Thermostatic Tube Ø 212 head 12/ / / / / /2 For RPE/ALU tube Tube Ø /2 Thermostatic head Steel tube for CH Tube Ø / / / /2 Complete ordering code with sleeve couplings according to the material used and diameter of the tube. The correct type of sleeve coupling is determined by the ordering code of the connection set Example: CODE. P2.D. 32. (insert relevant code from above) All dimensions are shown in millimetres

7 Correction factors Average correction factors according to EN442-75/65/20 C TV TL TR_ KEY Tv = flow temperature Tr = return temperature Tl = desired air temperature The indicated outputs with T 50 c and T 30 c are the exact outputs. T 50 c outputs are measured in accordance with EN442 and T 30 c outputs are calculated according to EN442. An average correction factor is given in this table for outputs at other T and is applicable for all dimensions. How to choose the right radiator? Rapid estimation of heat losses Calculate the volume of the room (L x x H) and multiply this by the atts/m³ figure given in the table below. Choose according to the level of insulation and the desired room temperature. Insulation excellent good average poor Required output in atts/m³ Example Use the table to determine the relevant correction factor with a water temperature of /60 c with a room temperature of 24 C. The correction factor = 0.90 Required output 1000 watts : 1000 divided by 0.90 = 1111 watts therefore search in this leaflet s standard output table for a product with an output of at least 1111 watts. Alternatively use the Radiator Finder search function on to identify all Jaga heating products with this required output. Output calculated in accordance with EN442, at a water temperature of 75/65 C and a room temperature of 20 C (ΔT=50).

8 Product description Circo Plus - wall-mounted Material Consists of vertical triangular steel radiation pipes, welded on steel positioning brackets. The radiation pipes are hydraulically connected using steel bends. Suitable for central heating. Finish The radiators are sandblasted, degreased, phosphated, electrostatically lacquered with epoxy-polyester powder and finally stove enamelled at 200 C. This high quality finish offers an optimal scratch resistance and is very easy to maintain. Thickness of the lacquer: min μ Pressure test: 9 bar orking pressure: 6 bar Colour The radiator is lacquered in the colour sandblast grey metallic 001 / white (RAL 9010) / white (RAL 9016) / other (see colour chart) How to install The building services engineer chooses the heating elements considering the following conditions: A heat output calculation according to the standard. Tables of heat outputs and dimensions for Iguana Circo Plus wall-mounted radiators according to EN 442. The radiators will be mounted to the wall with accessory brackets. The specially designed thermostatic connection sets / thermostatic Jaga Deco / Jaga Deco Pro valves / manual Jaga Deco valves can be connected to plastic central heating service pipes / RPE/ALU. tube / copper tube/ steel pipe. Jaga thermostatic heads / Jaga Deco thermostatic heads chrome / Jaga Deco thermostatic heads chrome/ white / Jaga Comap thermostatic heads silver / not to be / to be fitted. The Iguana Circo Plus wall-mounted model consists of triangular vertical radiation pipes welded on steel positioning brackets. The radiation pipes are hydraulically connected using steel bends, placed next to each other in half a circle. Side panels fitted to encase the rear of the Iguana and thus increase natural convection from the rear. Supplied with wall brackets and 2 air vents G 1/8. Central connection, standard for 2 pipe. Options All options have the same radius as the radiator. They can also be ordered and fitted afterwards. Towel rail and fixings in chrome-plated aluminium. Hat rack and fixings in chrome-plated aluminium- Including 5 coat hooks. Small shelf in beech veneer with chrome-plated fixings. Shelf width: 100mm. Large shelf in beech veneer with chrome-plated fixings. Shelf width: 170mm. Deco connection sets and valves 2 pipe. Table in beech veneer with supports and fixings in chromeplated aluminium. Deco Pro connection sets and valves 2 pipe. Guard with thermostatic valve, return valve for invisible connection to the wall or to the floor. Floorboards need to be removed for the guard.

9 Jaga colours For Circo Plus - all-mounted Standard colours COMPLETE YOUR COLOUR CODE Add 2 or 3 to the front of the selected colour code below to specify the finish RAL Gloss finish 3.. Satin Matt finish Traffic hite Sandblast Grey Metallic Premium colours RAL hite Pergamon Natural.12 RAL RAL Bahama arm brown Off-white RAL RAL Traffic yellow Orange Flaming Red RAL RAL Ruby Red Agais Green yellow RAL Green Calypso English Green.39 RAL RAL Heaven blue Ocean blue Sapphire Blue RAL RAL Night blue Rose Magenta RAL Violet Violet Classic hite RAL Light Grey RAL Dark Grey RAL 7016 RAL Anthracite Grey.04 As it s impossible to reproduce colours with 100% accuracy, this colour chart is intended as a guide only. Colour swatches are available on request. Black

10 Special colours For Circo Plus - all-mounted Smooth metallics RAL Aluminium Silver Grey anodised Grey Metallic Anthracite Golden yellow 050 Old gold Metallics fine texture Silvergrey arm grey Concrete grey pearl black Cream Grey brown 038 Cappuccino 042 Chocolate 017 pearl brown Fine texture Pure white Aluminium grey Platinum grey 028 granite grey Graphite grey Copper 044 As it s impossible to reproduce colours with 100% accuracy, this colour chart is intended as a guide only. Colour swatches are available on request. Cinnamon brown Khaki Navy bleu

11 Jaga Guarantee Information 1 The guarantee is valid only if the equipment is properly and correctly used, by its first owner and if installed in accordance with the norms and instructions as detailed in the instruction leaflet and current industry standard practices. 2 The guarantee only applies to the equipment and the spare parts supplied by Jaga. Jaga has the choice between repair and replacement of the equipment or the spare parts. If any modifications have been made by Jaga to the standard product design, Jaga reserves the right to replace the guaranteed equipment with equivalent products or spare parts. 3 The period of guarantee is mentioned in this certificate. The guarantee decreases every year on a straight line basis by an equal percentage in order to reach a zero guarantee at the end of the guarantee period (e.g. for a period of 10 years the annual decrease of the guarantees 10% of the invoiced value). Repaired or replaced product is guaranteed through to the end of the original guarantee period. 4 The guarantee is valid only on products displaying the appropriate identification information concerning product type and series. No guarantee is granted on equipment or spare parts lacking this information, on equipment where this information has been removed or altered, or on equipment that has been repaired or modified by persons not authorised by Jaga to carry out this work. 5 The customer is responsible for any damage caused as a result of errors in installation or use of incorrect fittings, or for any damage caused by electrical connections, faulty or damaged electrical installations or appliances, erroneous voltage or hydraulic pressure and all other errors not directly related to the product delivered by Jaga. The guarantee is also revoked when unsuitable parts or components are used. The guarantee for our heat exchangers is not valid if they are regularly drained, or if they are heated by means of industrial water, steam or water saturated by excessive quantities of oxygen. The quality of the system ater has to be in accordance with the VDI directives. The guarantee is also not applicable if the heat exchangers are placed in unsuitable atmospheric surroundings, such as but not exclusively ammonia, caustic substances etc. 6 This guarantee excludes damage due to incorrect handling and/or use of the equipment, or due to formation of lime deposits, incorrect use of the safety valve, or to all equipment that is incorporated into the building in a way that means it cannot be accessed normally. 7 Any work undertaken or product supplied as a result of a guarantee claim that proves not to be valid will be charged for. Product supplied will be invoiced at the customer s standard purchasing terms, and labour will be charged at 50 per hour with a minimum labour charge of The guarantee period starts from the date of the invoice for supply of the products covered by the guarantee. If the invoice is not available, the date of production will be used based on the product ID number/series. 9 Only the courts of judicial district Hasselt (Belgium) are authorised to deal with disputes arising from this guarantee. It will apply Belgian law even when sales involved are subjects of EU member states as well as non-eu member countries. Radiator Valves