10.6 Schedule of Accreditation

Size: px

Start display at page:

Download "10.6 Schedule of Accreditation"

Alannah Carter
5 years ago
Views:

Certification Body Accreditation is accredited by the GCC Accreditation Center () in accordance with the recognized International Standard, Conformity assessment -- Requirements for bodies certifying

1 Certification Body Accreditation is accredited by the GCC Accreditation Center () in accordance with the recognized International Standard, Conformity assessment -- Requirements for bodies certifying products, processes and services GULFTIC MIQ CERTIFICATION L.L.C. Issue No: 1 Issue Date: 12 July 2017 Address. Office No. 210, Al Nasr Plaza Building, Oud Metha, Dubai, United Arab Emirates Contact: Victorino Abejero Tel: Fax: victorino@gulftic-imq.com Web Address: Locations where certification activities covered by the above Accreditation Standard are undertaken 1- address: Office No. 210, Al Nasr Plaza Building, Oud Metha, Dubai, United Arab Emirates Version: 2 Page 1 of 40

2 For the following scope: Scope: 40 Certification Certification Certification Low Voltage Equipment Full Certification Scope details are as follows: LVE - Household and similar electrical appliances Household and similar electrical appliances Storage water heaters Electric irons Safety - Part 1: General requirements Safety - Part 2-21: Particular requirements for storage water heaters Labeling Energy Efficiency Label for Electrical Appliances Part 4: Electric Storage Water Heaters Safety - Part 2-3: Particular requirements for electric irons IEC :2010+A1:2013; UAE.S IEC IEC :2012; UAE.S IEC ; UAE.S IEC :2012+A1:2015; UAE.S IEC Version: 2 Page 2 of 40

3 Microwave ovens, including combination microwave ovens Spin extractors Washing machines Tumble dryers Washing Machines and Dryers Stationary cooking ranges, hobs, ovens and similar appliances Refrigerating appliances, icecream appliances and ice makers Safety - Part 2-25: Particular requirements for microwave ovens, including combination microwave ovens Safety - Part 2-4: Particular requirements for spin extractors Safety - Part 2-7: Particular requirements for washing machines Safety - Part 2-11: Particular requirements for tumble dryers Labeling - Energy efficiency label for electrical appliances Part 2: Washing Machines and Dryers Safety - Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances Safety - Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makers IEC :2010+A1:2014+ A2:2015; UAE.S IEC IEC :2008+A1:2012 UAE.S IEC IEC :2008+A1:2011 UAE.S IEC IEC :2008+A1:2012+A2:2015 UAE.S IEC UAE.S IEC :2014; UAE.S IEC IEC :2010+A1:2012 UAE.S IEC Version: 2 Page 3 of 40

4 Household Refrigerating Appliances Electrical heat pumps, airconditioners and dehumidifiers Household Air Conditioners Grills, toasters and similar portable cooking appliances Deep fat fryers, frying pans and similar appliances Kitchen machines Vacuum cleaners and watersuction cleaning appliances Labeling - Energy Efficiency Label for Electrical Appliances Part 3: Household Refrigerating Appliances Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers Labeling - Energy efficiency label for electrical appliances Part 1: household air conditioners Safety - Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances Safety - Part 2-13: Particular requirements for deep fat fryers, frying pans and similar appliances Safety - Part 2-14: Particular requirements for kitchen machines Safety - Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances UAE.S IEC :2013 UAE.S IEC ; UAE.S IEC :2008+A1:2012 UAE.S IEC IEC :2009 UAE.S IEC IEC :2016 UAE.S IEC IEC :2009+A1:2012; UAE.S IEC Version: 2 Page 4 of 40

5 Fans Heating liquids Walk-behind and hand-held lawn trimmers and lawn edge trimmers Scissors type grass shears Appliances for skin or hair care Shavers, hair clippers and similar appliances Dishwashers Safety - Part 2-80: Particular requirements for fans Safety - Part 2-15: Particular requirements for appliances for heating liquids Safety - Part 2-91: Particular requirements for walk-behind and hand-held lawn trimmers and lawn edge trimmers Safety - Part 2-94: Particular requirements for scissors type grass shears Safety - Part 2-23: Particular requirements for appliances for skin or hair care Safety - Part 2-8: Particular requirements for shavers, hair clippers and similar appliances Safety Part 2-5: Particular requirements for dishwashers Labeling Energy efficiency label for electrical appliances Part 6: Dishwasher IEC :2015; UAE.S IEC IEC :2012; UAE.S IEC IEC :2008 UAE.S IEC IEC :2008 UAE.S IEC IEC :2003+A1:2008+ A2:2012; UAE.S IEC IEC :2012+A1:2015 UAE.S IEC IEC :2012; UAE.S IEC UAE.S Version: 2 Page 5 of 40

6 Food waste disposers Appliances for skin exposure to optical radiation Sewing machines Battery chargers Room heaters Range hoods and other cooking fume extractors Massage appliances Instantaneous water heaters Pumps Safety - Part 2-16: Particular requirements for food waste disposers Safety - Part 2-27: Particular requirements for appliances for skin exposure to optical radiation Safety - Part 2-28: Particular requirements for sewing machines Safety - Part 2-29: Particular requirements for battery chargers Safety - Part 2-30: Particular requirements for room heaters Safety - Part 2-31: Particular requirements for range hoods and other cooking fume extractors Safety - Part 2-32: Particular requirements for massage appliances Safety - Part 2-35: Particular requirements for instantaneous water heaters Safety - Part 2-41: Particular requirements for pumps IEC :2002+A1:2008+ A2:2011; UAE.S IEC IEC :2009+A1:2012+ A2:2015 UAE.S IEC IEC :2002+A1:2008 UAE.S IEC IEC :2016 UAE.S IEC IEC :2009 UAE.S IEC IEC :201 UAE.S IEC IEC :2002+A1:2008+A2:2013 UAE.S IEC IEC :2012; UAE.S IEC IEC :2012 UAE.S IEC Version: 2 Page 6 of 40

7 Clothes dryers and towel rails Ironers Portable heating tools and similar appliances Commercial dispensing appliances and vending machines Appliances for heating liquids Storage water heaters Instantaneous water heaters Stationary circulation pumps for heating and service water installations Safety - Part 2-43: Particular requirements for clothes dryers and towel rails Safety - Part 2-44: Particular requirements for ironers Safety - Part 2-45: Particular requirements for portable heating tools and similar appliances Safety - Part 2-75: Particular requirements for commercial dispensing appliances and vending machines Safety - Part 2-15: Particular requirements for appliances for heating liquids Safety - Part 2-21: Particular requirements for storage water heaters Safety - Part 2-35: Particular requirements for instantaneous water heaters Safety - Part 2-51: Particular requirements for stationary circulation pumps for heating and service water installations IEC :2002+A1:2005+A2:2008 UAE.S IEC IEC :2002+A1:2008+A2:2011 UAE.S IEC IEC :2002+A1:2008+A2:2011 UAE.S IEC IEC :2012+A1:2015 UAE.S IEC IEC :2012 UAE.S IEC IEC :2012 UAE.S IEC IEC :2012 UAE.S IEC IEC :2002 UAE.S IEC Version: 2 Page 7 of 40

8 Oral hygiene appliances Electrical appliances use with aquariums and garden ponds Projectors and similar appliances Insect killers Thermal storage room heaters Commercial electric kitchen machines Air-cleaning appliances Portable immersion heaters Safety - Part 2-52: Particular requirements for oral hygiene appliances Safety - Part 2-55: Particular requirements for electrical appliances for use with aquariums and garden ponds Safety - Part 2-56: Particular requirements for projectors and similar appliances Safety - Part 2-59: Particular requirements for insect killers Safety - Part 2-61: Particular requirements for thermal storage room heaters Safety - Part 2-64: Particular requirements for commercial electric kitchen machines Safety - Part 2-65: Particular requirements for aircleaning appliances Safety - Part 2-74: Particular requirements for portable immersion heaters IEC :2002+A1:2008 UAE.S IEC IEC :2002+A1:2008 UAE.S IEC IEC :2002+A1:2008+A2:2014 UAE.S IEC :2002+A1:2006+A2:2009 UAE.S IEC IEC :2002+A1:2005 UAE.S IEC IEC :2002+A1:2007 UAE.S IEC IEC :2002+A1:2008+A2:2015 UAE.S IEC IEC :2002+A2:2009 UAE.S Version: 2 Page 8 of 40

9 Version: 2 Page 9 of 40 Commercial dispensing appliances and vending machines Outdoor barbecues High pressure cleaners and steam cleaners Fabric steamers Commercial microwave ovens Humidifiers Hand-held mains-operated garden blowers, vacuums and blower vacuums Gas, oil and solid-fuel burning appliances having electrical connections Safety - Part 2-75: Particular requirements for commercial dispensing appliances and vending machines Safety - Part 2-78: Particular requirements for outdoor barbecues Safety - Part 2-79: Particular requirements for high pressure cleaners and steam cleaners Safety - Part 2-85: Particular requirements for fabric steamers Safety - Part 2-90: Particular requirements for commercial microwave ovens Safety - Part 2-98: Particular requirements for Humidifiers Safety - Part 2-100: Particular requirements for hand-held mains-operated garden blowers, vacuums and blower vacuums Safety - Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections IEC :2012+A1:2015 UAE.S IEC :2002+A1:2008 UAE.S IEC :2016 UAE.S IEC IEC :2002+A1:2008 UAE.S IEC IEC :2015 UAE.S IEC IEC :2002+A1:2004 UAE.S IEC IEC :2002 UAE.S IEC IEC :2004+A2:2012 UAE.S IEC

10 Hand-held motoroperated electric tools - Safety General requirements Safety - Part 1: General requirements IEC :2006 UAE.S IEC Drills and impact drills Safety - Part 2-1: Particular requirements for drills and impact drills IEC :2003+A1:2008 UAE.S Screwdrivers and impact wrenches Safety - Part 2-2: Particular requirements for screwdrivers and impact wrenches IEC :2003+A1:2008 UAE.S Grinders, polishers and disktype sanders Sanders and polishers other than disk type Circular saws Hammers Spray guns for non-flammable liquids Shears and Nibblers Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders Safety - Part 2-4: Particular requirements for sanders and polishers other than disk type Safety - Part 2-5: Particular requirements for circular saws Safety - Part 2-6: Particular requirements for hammers Safety - Part 2: Particular requirements for spray guns for non-flammable liquids Safety - Part 2-8: Particular requirements for shears and nibblers IEC :2006+A1:2010+A2:2012 UAE.S IEC IEC :2002+A1:2008 UAE.S IEC IEC :2010; UAE.S IEC IEC :2003+A1:2006 UAE.S IEC :1989 UAE.S IEC IEC :2003+A1:2008 UAE.S IEC Version: 2 Page 10 of 40

11 Tappers Reciprocating Saws Concrete vibrators Chain Saws Planers Hedge Trimmers Tackers Routers and Trimmers Strapping Tools Safety - Part 2-9: Particular requirements for tappers Safety - Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws) Safety - Part 2-12: Particular requirements for concrete vibrators Safety - Part 2-13: Particular requirements for chain saws Safety - Part 2-14: Particular requirements for planers Safety - Part 2-15: Particular requirements for hedge trimmers Safety - Part 2-16: Particular requirements for tackers Safety - Part 2-17: Particular requirements for routers and trimmers Safety - Part 2-18: Particular requirements for strapping tools IEC :2003+A1:2008 UAE.S IEC IEC :2003+A1:2008 UAE.S IEC IEC :2003+A1:2008 UAE.S IEC IEC :2006+A1:2009 UAE.S IEC IEC :2003+A1:2006+A2:2010 UAE.S IEC IEC :2006+A1:2009 UAE.S IEC IEC :2008 UAE.S IEC IEC :2010 UAE.S IEC IEC :2003+A1:2008 UAE.S IEC Version: 2 Page 11 of 40

12 Plugs and socket-outlets for household and similar purposes Jointers Safety - Part 2-19: Particular requirements for jointers IEC :2005+A1:2010 UAE.S IEC Band Saws Safety - Part 2-20: Particular requirements for band saws IEC :2003+A1:2008 UAE.S IEC Drain Cleaners Safety - Part 2-21: Particular requirements for drain cleaners IEC :2002+A1:2008 UAE.S IEC General requirements Part 1: General requirements IEC :2002+A1:2006+A2:2013 UAE.S IEC Socket-outlets for appliances Part 2-2: Particular requirements for socketoutlets IEC :2006 for appliances UAE.S IEC Switched socket-outlets Part 2-3: Particular requirements for switched IEC :2006 without interlock for fixed socket-outlets without interlock for fixed UAE.S IEC installations installations Plugs and socket-outlets for Part 2-4: Particular requirements for plugs and IEC :2007; UAE.S IEC SELV socket-outlets for SELV Adaptors Part 2: Particular requirements for adaptors IEC :1995; UAE.S IEC Version: 2 Page 12 of 40

13 Switches for household and similar fixed electrical installation Switched socket-outlets with interlock for fixed electrical installations Cord Extension sets Part 2-6: Particular requirements for switched socket-outlets with interlock for fixed electrical installations Part 2-7: Particular requirements for cord extension sets IEC :1997 UAE.S IEC IEC :2011+A1:2013 UAE.S IEC General requirements Part 1: General requirements IEC :1998+A1:1999+A2:2006 UAE.S IEC Electronic switches Electromagnetic remotecontrol switches (RCS Time-delay switches (TDS) Isolating switches Exterior and interior signs and luminaires Part 2-1: Particular requirements - Electronic switches Part 2-2: Particular requirements - Electromagnetic remote-control switches (RCS) Part 2-3: Particular requirements - Time-delay switches (TDS) Part 2-4: Particular requirements - Isolating switches Part 2-6: Particular requirements - Fireman's switches for exterior and interior signs and luminaires IEC :2002+A1:2008 UAE.S IEC IEC :2006 UAE.S IEC IEC :2006 UAE.S IEC IEC :2004 UAE.S IEC IEC :2012 UAE.S IEC Version: 2 Page 13 of 40

14 Safety of laser products Lamp Control Gear Part 1: Equipment classification and requirements Part 1: Equipment classification and requirements IEC :2014 UAE.S GSO IEC Laser displays and shows Part3 :Guidance for laser displays and shows IEC TR :2008; GSO IEC :2012; UAE.S GSO IEC Laser guards Part 4: Laser guards IEC :2006+A1:2008+A2:2011 UAE.S GSO IEC Laser beams on humans Part 8 : Guidelines for the safe use of laser beams on humans IEC TR :2006; GSO IEC :2012; UAE.S GSO IEC General and safety Part 1: General and safety requirements IEC :2015; UAE.S IEC requirements Starting devices D.C or A.C supplied electronic step-down convertors for filament lamps A.C and/or D.C supplied electronic control gear for fluorescent lamps Part 2-1: Particular requirements for starting devices (other than glow starters) Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps Part 2-3: Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent lamps IEC :2000+A1:2005+ A2:2013; UAE.S IEC IEC :2011 UAE.S IEC IEC :2011+A1:2016 UAE.S IEC Version: 2 Page 14 of 40

15 D.C supplied electronic ballasts for general lighting Battery supplied electronic control gear for emergency lighting (self-contained) Ballasts for fluorescent lamps Electromagnetic control gear for discharge lamps (excluding fluorescent lamps) Electronic invertors and convertors for high-frequency operation of cold start tubular discharge lamps (neon tubes) Miscellaneous electronic circuits used with luminaires Part 2-4: Particular requirements for d.c. supplied electronic ballasts for general lighting Part 2-7: Particular requirements for battery supplied electronic control gear for emergency lighting (self-contained) Part 2-8: Particular requirements for ballasts for fluorescent lamps Part 2-9: Particular requirements for electromagnetic control gear for discharge lamps (excluding fluorescent lamps) Part 2-10: Particular requirements for electronic invertors and convertors for high-frequency operation of cold start tubular discharge lamps (neon tubes) Part 2-11: Particular requirements for miscellaneous electronic circuits used with luminaires UAE.S IEC IEC :2011 UAE.S IEC IEC :2000+A1:2006 UAE.S IEC IEC :2012 UAE.S IEC IEC :2000+A1:2008 UAE.S IEC IEC :2001 UAE.S IEC Version: 2 Page 15 of 40

16 Audio, video s Lighting s D.C. or A.C. supplied electronic ballasts for discharge lamps (excluding fluorescent lamps) D.C or A.C. supplied electronic control gear for LED module Audio, video and similar electronic apparatus Part 2-12: Particular requirements for d.c. or a.c. supplied electronic ballasts for discharge lamps (excluding fluorescent lamps) Part 2-13: Particular requirements for d.c. or a.c. supplied electronic control gear for LED modules Safety requirements IEC :2005+A1:2010 UAE.S IEC IEC :2014 UAE.S IEC IEC 60065:2014/COR2:2016 UAE.S IEC Tungsten filament lamps for Performance requirements IEC 60064:1993; UAE.S IEC domestic and similar general lighting purposes Double-capped fluorescent Performance specifications IEC 60081:1997; UAE. S IEC lamps Fluorescent lamps Glow-starters for fluorescent lamps IEC 60155:1963; UAE.S IEC Low-pressure sodium vapour lamps Tungsten halogen lamps (nonvehicle) Performance specifications IEC 60192:2001; UAE.S IEC Performance specifications IEC 60357:2002/A3:2011; UAE.S IEC Version: 2 Page 16 of 40

17 Lamp cap temperature rise Standard method of measurement of lamp cap temperature rise IEC 60360:1998/COR1:1999 UAE.S IEC Incandescent lamps - Safety specifications Part 1: Tungsten filament lamps for domestic and similar general lighting purposes IEC :1999+A1:2005+A2:2011 UAE.S IEC Incandescent lamps - Safety specifications Part 2: Tungsten halogen lamps for domestic and similar general lighting purposes IEC :1999+A1:2005+A2:2012 UAE.S IEC Incandescent lamps - Safety specifications Part 3: Tungsten halogen lamps (non-vehicle) IEC :2012; UAE.S IEC Incandescent lamps Maximum lamp outlines for incandescent lamps IEC 60630:1994+A7:2014 UAE.S IEC Luminaires Heat test source (H.T.S.) lamps for carrying out IEC 60634:1993; UAE.S IEC heating tests on luminaires High-pressure sodium vapour Performance specifications IEC 60662:2011; UAE.S IEC lamps Quartz-tungsten-halogen lamps Standard method of measuring the pinch temperature of quartz-tungsten-halogen lamps IEC 60682:1980/A2:1997 UAE.S IEC Starterless tubular fluorescent lamps Pre-heat requirements for starterless tubular fluorescent lamps IEC TR 60882:1986; UAE.S IEC TR Version: 2 Page 17 of 40

18 Lamps Glass bulb designation system for lamps IEC TR 60887:2010; UAE.S IEC TR Single-capped fluorescent lamps Single-capped fluorescent lamps - Performance specifications IEC 60901:1996+A1:1997+A2:2000 UAE.S IEC Self-ballasted fluorescent lamps Safety requirements IEC 60968:2015; UAE.S IEC for general lighting services Self-ballasted compact Performance requirements IEC 60969:2016; UAE.S IEC fluorescent lamps for general lighting services New lighting products Classification and interpretation of new lighting products IEC TR 60972:1989 UAE.S IEC TR Maximum lamp outlines Procedure for use in the preparation of maximum lamp outlines IEC 61126:1992/AMD2:2005 UAE.S IEC High pressure xenon short arc lamps Dimensional, electrical and photometric data and cap types IEC TR 61127:1992 UAE.S IEC TR Metal halide lamps Performance specification IEC 61167:2015; UAE.S IEC Double-capped fluorescent lamps Safety specifications IEC 61195:1999+A1:2012+A2:2014 UAE.S IEC Version: 2 Page 18 of 40

19 Single-capped fluorescent lamps Safety specifications IEC 61199:2011/A2:2014 UAE.S IEC International lamp coding system International lamp coding system (ILCOS) IEC 61231:2010+A1:2013; UAE.S IEC Reflector Lamps Method of measurement of centre beam intensity IEC TR 61341:2010; UAE.S IEC TR and beam angle(s) of reflector lamps Miscellaneous lamps Miscellaneous lamps IEC 61549:2003/A3:2012 UAE.S IEC LED modules for general lighting Safety specifications IEC 62031:2008+A1:2012+A2:2014 UAE.S IEC Discharge lamps (excluding fluorescent lamps) Safety specifications IEC 62035:2014/A1:2016 UAE.SIEC Lamps and lamp systems Photobiological safety of lamps and lamp systems IEC 62471:2006; UAE.S IEC General lighting Light emitting diode (LED) products and related equipment - Terms and definitions IEC 62504:2014; UAE.S IEC Fluorescent induction lamps Safety specifications IEC 62532:2011+A1:2016 UAE.S IEC Version: 2 Page 19 of 40

20 Mercury level in fluorescent lamps General lighting services by voltage > 50 V Self-ballasted LED lamps Sample preparation for measurement of mercury level in fluorescent lamps Self-ballasted LED-lamps for general lighting services by voltage > 50 V - Safety specifications Self-ballasted LED lamps for general lighting services with supply voltages > 50 V - Performance requirements IEC 62554:2011 UAE.S IEC IEC 62560:2011+A1:2015 UAE.S IEC IEC 62612:2013 UAE.S IEC Fluorescent induction lamps Performance specification IEC 62639:2012; UAE.S IEC Non-ballasted LED lamps Safety requirements UAE.S IEC Non-ballasted LED lamps Performance Requirements. UAE.S IEC LED-Binning Colour rendering and correlated colour temperature Part 1: General requirements and white colour grid Three-digit code for designation of colour rendering and correlated colour temperature IEC :2013; UAE.S IEC IEC TR 62732:2012 UAE.S IEC TR Unified fluorescent lamp Dimming standard calculations IEC TR 62750:2012; UAE.S IEC TR Double-capped LED lamps Double-capped LED lamps designed to retrofit IEC 62776:2014/COR1:2015 linear fluorescent lamps - Safety specifications UAE.S IEC Version: 2 Page 20 of 40

21 Assessment of blue light hazard to light sources and luminaires Ballasts for tubular fluorescent lamps Auxiliaries for lamps - Ballasts for discharge lamps (excluding tubular fluorescent lamps) Application of IEC for the assessment of blue light hazard to light sources and luminaires IEC TR 62778:2014 UAE.S IEC TR Performance requirements IEC 60921:2004; UAE.S IEC Performance requirements IEC 60923:2005+A1:2006 UAE.S IEC Auxiliaries for lamps Starting devices (other than glow starters) - Performance requirements AC and/or DC- Supplied electronic control gear for tubular fluorescent lamps Performance requirements DC or AC Supplied electronic step-down convertors for filament lamps Performance requirements Auxiliaries for lamps Capacitors for use in tubular fluorescent and other discharge lamp circuits - General and safety requirements IEC 60927:2007+A1:2013 UAE.S IEC 60927:2007+A1:2013 IEC 60929:2011+A1:2015; UAE.S IEC IEC 61047:2004 UAE.S IEC IEC 61048:2006/A1:2015 UAE.S IEC Version: 2 Page 21 of 40

22 Capacitors for use in tubular fluorescent and other discharge lamp circuits Transformers for tubular discharge lamps having a noload output voltage exceeding 1000 V (generally called neontransformers). DC or AC supplied electronic control gear for LED modules Energy performance of lamp control gear Energy performance of lamp control gear Performance requirements IEC 61049:1991 UAE.S IEC 61049:1991 General and safety requirements Performance requirements Part 1: Control gear for fluorescent lamps - Method of measurement to determine the total input power of control gear circuits and the efficiency of the control gear Part 2: Control gear for high intensity discharge lamps (excluding fluorescent lamps) - Method of measurement to determine the efficiency of the control gear IEC 61050:1991/A1:1994 UAE.S IEC IEC 62384:2006+A1:2009 UAE.S IEC IEC :2011 UAE.S IEC IEC :2014 UAE.S IEC Version: 2 Page 22 of 40

23 Energy performance of lamp control gear Equipment for general lighting purposes Miscellaneous lampholders Lamp caps Lampholders Gauges Digital addressable lighting interface Part 3: Control gear for halogen lamps and LED modules - Method of measurement to determine the efficiency of the control gear IEC :2014 UAE.S IEC EMC immunity requirements IEC 61547:2009 UAE.S IEC Part 2-2: Particular requirements - Connectors for IEC :2006+A1:2012 LED-modules UAE.S IEC Lamp caps and holders together with gauges for IEC :2005 the control of interchangeability and safety - Part IEC :1969/A55:2016 1: Lamp caps UAE.S IEC Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges Part 101: General requirements - System components IEC :1969/A51:2016 UAE.S IEC IEC :1969/A51:2015 UAE.S IEC IEC :2014 UAE.S IEC Version: 2 Page 23 of 40

24 Digital addressable lighting interface Control gear Digital addressable lighting interface Control gear - LED modules Electromagnetic compatibility (EMC) Limits for harmonic current emissions (equipment input current 16 A per phase Electromagnetic fields Part 102: General requirements - Control gear IEC :2014 UAE.S IEC Part 207: Particular requirements for control gear - LED modules (device type 6) Part 3-2: Limits - Limits for harmonic current emissions (equipment input current 16 A per phase) IEC :2009 UAE.S IEC IEC :2014 UAE.S IEC Assessment of lighting equipment related to human exposure to electromagnetic fields IEC 62493:2015 UAE.S IEC Luminaires Part 1: General requirements and tests IEC :2014; UAE.S IEC Fixed general purpose luminaires Luminaires. Part 2: Particular requirements. Section One: Fixed general purpose luminaires IEC :1979 UAE.S IEC Luminaire performance Part 1: General requirements IEC :2014; UAE.S IEC LED Luminaire performance Part 2-1: Particular requirements for LED luminaires IEC :2014 UAE.S IEC Version: 2 Page 24 of 40

25 Circuitbreakers Conduits Sound signaling devices Version: 2 Page 25 of 40 Electrical accessories - Circuitbreakers for overcurrent protection for household and similar installations Electrical accessories - Circuitbreakers for overcurrent protection for household and similar installations Electrical installations and threads for conduits and fittings Sound signaling devices for household and similar purposes Part 1: Circuit-breakers for a.c. operation IEC :2015 UAE.S IEC Part 2: Circuit-breakers for AC and DC operation IEC :2016 UAE.S IEC Conduit systems for cable management - Outside diameters of conduits for electrical installations and threads for conduits and fittings Sound signaling devices for household and similar purposes IEC 60423:2007 UAE.S IEC IEC 62080:2001/A2:2015 UAE.S IEC Electric Toys Electric Toys Electric toys - Safety IEC 62115:2003; UAE.S IEC AC and DC Low Voltage Wires and Cables Single core non-sheathed cables with thermoplastic PVC insulation Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U). Cables for general applications. Single core non-sheathed cables with thermoplastic PVC insulation BS EN :2011 UAE.S EN

26 Single core non-sheathed cables with halogen-free crosslinked insulation, and low emission of smoke Flexible cables with thermoplastic PVC insulation Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U). Flexible cables with crosslinked elastomeric insulation Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U). Cables with special fire performance. Single core nonsheathed cables with halogen-free crosslinked insulation, and low emission of smoke Low voltage energy cables of rated voltages up to and including 450/750V (U0/U). Cables for general applications. Flexible cables with thermoplastic PVC insulation Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U). General requirements Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U). Cables for general applications. Flexible cables with crosslinked elastomeric insulation BS EN :2011 UAE.S EN BS EN :2011 UAE.S EN BS EN :2011 UAE.S BS EN BS EN :2011 UAE.S EN Version: 2 Page 26 of 40

27 Oil resistant control cables with thermoplastic PVC insulation Flexible cables with halogenfree crosslinked insulation, and low emission of smoke Multicore cables with crosslinked silicone rubber insulation Armoured cables Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U). Cables for general applications. Oil resistant control cables with thermoplastic PVC insulation Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U). Cables with special fire performance. Flexible cables with halogen-free crosslinked insulation, and low emission of smoke Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U). Cables for general applications. Multicore cables with crosslinked silicone rubber insulation Thermosetting insulated, armoured cables of rated voltages of 600/1 000 V and 1 900/3 300 V for fixed installations, having low emission of smoke and corrosive gases when affected by fire. BS EN :2011 UAE.S EN BS EN :2011 UAE.S EN BS EN :2011 UAE.S EN BS 6724:2016 UAE.S BS 6724 Version: 2 Page 27 of 40

28 Version: 2 Page 28 of 40 Voltages up to and including 300/500 V, for electric power and lighting Electric power and lighting and having low emission of smoke and corrosive gases when affected by fire Rubber insulated cables - Rated voltages up to and including 450/750 V Power cables with extruded insulation and their accessories Fixed wiring in ships and on mobile and fixed offshore units Single core PVC insulated flexible cables PVC insulated and PVC sheathed cables for voltages up to and including 300/500 V, for electric power and lighting Thermosetting insulated and thermoplastic sheathed cables for voltages up to and including 450/750 V for electric power and lighting and having low emission of smoke and corrosive gases when affected by fire Part 1: General requirements Part 1: Cables for rated voltages of 1 kv (Um = 1,2 kv) and 3 kv (Um = 3,6 kv) Specification for elastomer insulated cables for fixed wiring in ships and on mobile and fixed offshore units Single core PVC insulated flexible cables of rated voltage 600/1000 V for switchgear and control gear wiring BS 6004:2012 UAE.S BS 6004 BS 7211:2012 UAE.S BS 7211 IEC :2003+A1:2007 GSO IEC :2010; UAE.S IEC IEC :2004+AMD1:2009 UAE.S IEC BS 6883:1991 UAE.S BS 6883 BS 6231:2006 UAE.S BS 6231

29 Insulated flexible cables and cords for coil leads Thermosetting insulated, armoured cables Thermosetting insulated, nonarmoured cables Thermosetting insulated, armoured, fire-resistant cables Elastomer insulated fire resistant (limited circuit integrity) cables Specification for insulated flexible cables and cords for coil leads Thermosetting insulated, armoured cables of rated voltages of 600/1 000 V and 1 900/3 300 V for fixed installations. Specification Thermosetting insulated, non-armoured cables with a voltage of 600/1 000 V, for fixed installations Thermosetting insulated, armoured, fire-resistant cables of rated voltage 600/1 000 V for fixed installations, having low emission of smoke and corrosive gases when affected by fire. Specification Elastomer insulated fire resistant (limited circuit integrity) cables for fixed wiring in ships and on mobile and fixed offshore units. Requirements and test methods BS 6195:1969 UAE.S BS 6195 BS 5467:2016 UAE.S BS 5467 BS 7889:2012 UAE.S BS 7889 BS 7846:2015 UAE.S BS 7846 BS 7917:1999 UAE.S BS 7917 Version: 2 Page 29 of 40

30 Gas Powered Ovens & Cooking Ranges Fire resistant screened cables having low emission of smoke and corrosive gases Cable reels for household and similar purposes Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V Electric cables. Specification for 300/500 V fire resistant screened cables having low emission of smoke and corrosive gases when affected by fire. Multicore and multipair cables Electrical accessories - Cable reels for household and similar purposes Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 1: General requirements BS :2008 UAE.S BS 7629 IEC 61242:1995/A1:2008 UAE.S IEC IEC :2007 UAE.S IEC Power track Systems Part 1: General requirements IEC :2011/A1:2014 UAE.S IEC Domestic cookers for use with liquefied Petroleum gases Requirements for domestic cookers for use with liquefied petroleum gases GSO 1050:2000 UAE.S 1050 Version: 2 Page 30 of 40

31 Commercial and Central Air Conditioning System Diesel (Gas Oil) Lubricating Oils Commercial and central Air conditioners Labeling - Energy efficiency label for electrical appliances - Part five: commercial and central Air conditioners UAE.S Diesel (Gas Oil) Gulf Guide of Standard Specifications for Diesel(Gas Oil) GSO 477:2011 UAE.S GSO 477 Lubricating Oils Lubricating Oils for Internal Combustion Engines GSO 1785:2013 API Classifications UAE.S GSO 1785 Energy drinks Energy drinks Requirements for handling non-alcoholic FDS 1926:2015 formulated caffeinated beverages UAE.S 1926 Bottled Bottled Drinking Water Requirements bottled drinking water fit for GSO 1025:2009 Drinking human consumption UAE.S GSO 1025 Water Bottled natural mineral water Requirements bottled natural mineral water GSO 987: 2013 offered for sale as food product UAE.S GSO 987:2013 Ice for human consumption Requirements on manufacturing of ice for human GSO 384:1994 consumption. UAE.S GSO 384:1994 Perfumes Cosmetic products Cosmetic s safety requirements GSO 1943 :2016; UAE.S GSO 1943 Version: 2 Page 31 of 40

32 Detergent Cosmetics - Packaging and labelling Quantity of in Prepackages Glass containers used for cosmetics Synthetic liquid detergents for Clothing and fabrics Coloured textiles detergent Synthetic Detergents - Detergents Powder Synthetic Detergents for Kitchen Requirements for packaging and labelling of all cosmetic products Legal metrology requirements for prepackaged also called prepackaged commodities ISO 22715:2006 UAE.S GSO ISO 22715:2008 GSO OIML R 87:2007 UAE.S GSO OIML R 87 3 Glass containers used for cosmetics. GSO 2093 :2011; UAE.S GSO 2093 Requirement of synthetic liquid detergents which GSO 2059:2010 containing active substances for used in UAE.S GSO 2059 laundering of clothing and fabrics of all types of washing machines and regular hand washing. Requirements for Chlor or its derivatives free coloured textiles detergent which acts by the effect of active atomic oxygen generated from hydrogen peroxide Requirements for household synthetic detergent powders GSO 2077:2010 UAE.S GSO 2077 GSO 151 :2007 UAE.S GSO 151 Requirements for synthetic detergents for kitchen GSO 1946:2010 UAE.S GSO 1946 Version: 2 Page 32 of 40

33 Cosmetics and Personal Care s Sodium Bicarbonate Liquid Chlorine Liquid Glass Cleaner Liquid carpet shampoos Soap Flakes Cosmetics and Personal Care s Sodium bicarbonate used in various washing and cleaning processes, with or without use of soap as conditions demand, and where a mildly alkaline material is desired. Requirements for liquid chlorine for industrial purposes. Requirements for Liquid glass cleaner ready for use for cleaning and polishing glass surfaces. General requirements and test methods for carpet shampoos Requirements for Soap flakes intended for domestic purposes. General safety requirements and parameters as well as labeling and packaging requirements for cosmetics and personal care products. GSO 1110 :2002 UAE.S GSO 1110 GSO 528 :1994 UAE.S GSO 528 GSO 884 :1997; UAE.S GSO 884 GSO 461:1994; UAE.S GSO 461 GSO 877:1997; UAE.S GSO 877 GSO 1943:2016 UAE S. GSO 1943 Version: 2 Page 33 of 40

34 Food Contact Materials Cosmetics -Packaging And Labelling Requirements for packaging and labelling of all cosmetic products as defined according to national regulations or practices intended for sale or free distribution. Requirements to be fulfilled in breast-milk substitutes. GSO ISO 22715:2008 UAE.S GSO ISO Breast milk substitutes GSO 223:2013 UAE.S GSO 223 Food packages Part 2: Plastic package - General requirements GSO 1863 :2013; UAE.S GSO 1863 Fresh fruits and vegetables boxes Tableware made from melamine plastics Wrapping Paper And Paper Bags General requirements for fresh fruits and vegetables packing boxes made from wood, carton or plastic Requirements for melamine tableware such as cups, glasses and plates of various types. General requirements for: 1.1 Kraft paper used for wrapping and packaging and in the manufacture of bags and similar articles; 1.2 Paper bags used for packing foodstuffs and other products. GSO 124:1990 UAE.S GSO 124 GSO 142:2010 UAE.S GSO 142 GSO 458:1994 UAE.S GSO 458 Version: 2 Page 34 of 40

35 Single - use rigid and semi - rigid plastic cups and containers for packaging beverages, Milk products, and allied purposes Milk paperboard containers Polyethylene bags for food packaging applications Three Piece Steel Round Cans Used For Canning Food Stuffs The Two Pieces Aluminum round cans used for canning food (beverages & stuffs) The Two-Pieces Steel Round and Used For Canning Food- Stuffs General requirements for single - use rigid and semi-rigid plastic cups, containers and closures for packaging beverages, milk products, and allied purposes Disposable pasteurized milk containers which are manufactured from two sided polyethylene coated paperboard blanks or rolls. Polyethylene bags to be used for food packaging applications Three piece round steel cans (tin coated or tin free steel) used for canning food stuffs. Hermetically sealed round Aluminum two pieces cans used for canning beverages and stuffs. Two-piece steel round cans used for canning foodstuffs GSO 462:1994 UAE.S GSO 462 GSO 1102:2002 UAE.S GSO 1102 GSO 1193:2002 UAE.S GSO 1193 GSO 1791:2007 UAE.S GSO 1791 GSO 1793:2007 UAE.S GSO 1793 GSO 1794:2007 UAE.S GSO 1794 Version: 2 Page 35 of 40

36 Version: 2 Page 36 of 40 Cook ware made from thermal glass Cold Formed Aluminum Household Utensils Tea and Herbs bags Domestic cookware coating materials Non-Returnable Glass Bottles For Carbonated Beverage Cookware - Domestic cookware for use on top of a stove, cooker or hob Ceramic cookware in contact with food Cosmetics -- Packaging and labelling Requirements for cook ware made from thermal glass. Cold formed aluminum utensils for household use but does not include pressure cookers. Different types of tea bags (black-green flavored) and with different herbs bags. Requirements for domestic cookware materials for use on top of a stove, cooker or hob Non-returnable glass bottles manufactured from soda-lime-silica glass with nominal capacity of up to and including one litre, intended for use in the packaging of carbonated beverages. Part 2: Further general requirements and specific requirements for ceramic, glass and glass ceramic cookware Release of lead and cadmium -- Part 2: Permissible limits Requirements for packaging and labelling of all cosmetic products GSO 2075:2010 UAE.S GSO 2075 GSO 1008:1998 UAE.S GSO 1008 GSO 2138:2011 UAE.S GSO 2138 GSO 2014:2010 UAE.S GSO 2014 GSO 1024:2000 UAE.S GSO 1024 GSO CEN/TS :2012 UAE.S GSO EN TS ISO :1986; GSO ISO :2013 UAE.S GSO ISO GSO ISO 22715:2008 UAE.S GSO ISO 22715

37 Water Fixture Glass hollowware in contact with food Ceramic ware in contact with food Materials and articles in contact with foodstuffs Vitreous china plumbing fixtures and hydraulic requirements for water closets and urinals Hydraulic Performance Requirements for Water Closets and Urinals Release of lead and cadmium -- Part 2: Permissible limits Release of lead and cadmium Part 2: Permissible limits Insulated containers for domestic use. Specification for insulated bags and boxes Requirements for materials, construction, performance, testing, and markings. Sanitary performance requirements and test procedures for water closets and urinals discharging into gravity waste systems in permanent buildings and structures GSO ISO :2013 UAE.S GSO ISO GSO ISO :1981 UAE.S GSO ISO GSO EN :2013 UAE.S GSO EN ASME A ANSI Z ASME A /CSA B ASME A /CSA B ASME A Water Closet Tanks Water Closet Tanks ANSI Z ; ASME A ; A /CSA B Electro Hydraulic Water Closet Electro Hydraulic Water Closet A /CSA B Version: 2 Page 37 of 40

38 Ceramic plumbing fixtures - Vitreous and non-vitreous china plumbing fixtures, including all types of water closets, lavatories, urinals, bidets, bathtubs, shower receptors, kitchen and bar sinks, service sinks, drinking fountains and institutional application fixtures Requirements for materials, construction, performance, testing, and markings. ASME A / CSA B Vitreous China Nonwater Urinals Plumbing Supply Fittings Requirements and test methods pertaining to materials, significant dimensions, and functional performance for vitreous china nonwater urinals. The sanitary performance requirements and test procedures apply to all types of nonwater urinals Plumbing supply fittings and accessories located between the supply stop and the terminal fitting. A ASME A ASME A /CSA B Version: 2 Page 38 of 40

39 Sanitary tapware. Thermostatic mixing valves (PN 10). Sanitary tapware. Shower hoses for sanitary tapware for water supply systems of type 1 and type 2 Sanitary tapware- Mechanical mixing valves (PN 10) Protection against pollution of potable water in water installations and general requirements of devices to prevent pollution by backflow Plastic plumbing fixtures Stainless Steel Plumbing Fixtures General technical specification BS EN 1111:1999 General technical specification BS EN 1113:2008+A1:2011 BS EN 1112:2008 General technical specifications BS EN 817:2008 General requirements of devices to prevent pollution by backflow Requirements for materials, construction, performance, testing, and markings. Requirements for materials, construction, performance, testing, and markings. BS EN 1717:2000 CSA B /IAPMO Z ASME A /CSA B Version: 2 Page 39 of 40

40 Sanitary tapware. Shower hoses for sanitary tapware for water supply systems of type 1 and type 2. Sanitary tapware - Single taps and combination taps for water supply systems of Type 1 and Type 2 General technical specification BS EN 1113:2015 General Technical Specification BS EN 200:2008 END GULFTIC IMQ CERTIFICATION L.L.C. recorded as issuing accredited certificates to organizations in the countries listed below. This list is current at the time of issue of this schedule. United Arab Emirates Bahrain Saudi Arabia Oman Qatar Kuwait Yemen Version: 2 Page 40 of 40

10.6 Schedule of Accreditation

10.6 Schedule of Accreditation Product Certification Body Accreditation is accredited by the GCC Accreditation Center () in accordance with the recognized International Standard, Conformity assessment -- Requirements for bodies certifying