Fluorescent Lamps - Guide for Electrical Measurements

Transcription

1 IAS Accreditation Number TL-471 Company Name UL-CCIC Company Limited Address No. 2, Chengwan Road Suzhou Industrial Park Suzhou People s Republic of China Contact Name Antonio Zhang, Laboratory Manager Telephone x Effective Date of Scope August 14, 2018 Accreditation Standard ISO/IEC 17025:2005 Electrical ANSI C Fluorescent Lamps - Guide for Electrical Measurements ANSI C Electric Lamps - Specifications for the Chromaticity of Solid-state Lighting Products ANSI C ANSI C82.6 CIE 13.3 CIE 15 CIE 18.2 CIE 63 CIE 84 Electric Lamps, High Intensity Discharge, Methods of Measuring Characteristics Lamps Ballasts - Ballast For High Intensity Discharge Lamps - Methods of Measurement Method of Measuring and Specifying Color Rendering of Light Sources Colorimetry Standard Basis of Physical Photometry (E) The Spectroradiometric Measurement of Light Sources (E) The Measurement of Luminous Flux EU 2015/1428, EC 244/2009 COMMISSION REGULATION implementing Directive 2005/32/EC of the European Parliament and of the Council with regard to ecodesign requirements for non- directional household lamps - Text with EEA relevance. Annexes I, II, III, VI AND VII work instruction 10-ICW0856, ISSUE 4/24/03/2017. EC 874 REGULATIONS COMMISSION DELEGATED REGULATION supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to energy labelling of electrical lamps and luminaires - Text with EEA relevance. Annexes I, II, III, VI AND VII work instruction 10-ICW0856, International Accreditation Service, Inc Saturn Street, Suite 100, Brea, California U.S.A Telephone IASInfo@iasonline.org Page 1 of 12

2 ISSUE 4/24/03/2017. EU 2015/1428, EC245/2009 COMMISSION REGULATION implementing Directive 2005/32/EC of the European Parliament and of the Council with regard to ecodesign requirements for fluorescent lamps without integrated ballast, for high intensity discharge lamps, and for ballasts and luminaires able to operate such lamps, and repealing Directive 2000/55/EC of the European Parliament and of the Council - Text with EEA relevance EN 1194 REGULATIONS COMMISSION implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to ecodesign requirements for directional lamps, light emitting diode lamps and related equipment - Text with EEA relevance (Restricted to ANEX III) EN A1 Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 1: Measurement and file format IEC Rotating electrical machines - part 1: rating and performance IEC IEC IEC IEC Rotating electrical machines - Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles) Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) Classification Rotating electrical machines Part 11: Thermal protection Rotating electrical machines - Part 30-1: Efficiency classes of line operated AC motors (IE code) IEC/EN Household and similar electrical appliances - safety - part 1: general requirements IEC/EN Safety of household and similar electrical appliances, part 2: particular requirements for refrigerating appliances, icecream appliances and ice-makers IEC/EN Safety of household and similar electrical appliances, part 2-40: particular requirements for electrical heat pumps, airconditioners and dehumidifiers IEC/EN Household and similar electrical appliances - safety part 2-89: particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant unit or TL-471 Page 2 of 12

3 compressor IEC/EN Hand-held motor-operated electric tools safety part 1: general requirements IEC/EN Hand-held motor-operated electric tools safety part 2-1: particular requirements for drills and impact drills IEC/EN Hand-held motor-operated electric tools safety part 2-2: particular requirements for screwdrivers and impact wrenches IEC/EN Hand-held motor-operated electric tools safety part 2-3: particular requirements for grinders, polishers and disk-type sanders IEC/EN Hand-held motor-operated electric tools safety part 2-4: particular requirements for grinders, polishers and disk-type sanders IEC/EN Hand-held motor-operated electric tools safety part 2-5: particular requirements for circular saws IEC/EN Hand-held motor-operated electric tools safety part 2-6: particular requirements for hammer IEC/EN Hand-held motor-operated electric tools safety part 2-8: particular requirements for shears and nibblers IEC/EN Hand-held motor-operated electric tools safety part 2-9: particular requirements for tappers IEC/EN Hand-held motor-operated electric tools safety part 2-11: particular requirements for reciprocating saws IEC/EN Hand-held motor-operated electric tools safety part 2-12: particular requirements for concrete vibrators IEC/EN Hand-held motor-operated electric tools safety part 2-14: particular requirements for planers IEC/EN Hand-held motor-operated electric tools safety part 2-15: particular requirements for hedge trimmers IEC/EN Hand-held motor-operated electric tools safety part 2-16: particular requirements for tackers IEC/EN Hand-held motor-operated electric tools safety part 2-17: particular requirements for routers and trimmers IEC/EN IEC/EN Particular requirements for strapping tools Particular requirements for jointers TL-471 Page 3 of 12

4 IEC/EN IEC/EN Particular requirements for band saws Particular requirements for drain cleaners IEC/EN Hand-held motor-operated electric tools - safety - part 2-22: particular requirements for cut-off machines IEC/EN IEC/TR IEC/EN IEC/EN IEC IEC/EN IEC IEC/TR IEC/EN IEC/EN IEC/EN IEC/EN IEC/EN IEC/EN Particular requirements for die grinders and small rotary Tools Method of measurement of centre beam intensity and beam angle(s) of reflector lamps Photobiological safety of lamps and lamp systems Self-ballasted LED lamps for general lighting services with supply voltages > 50 V - Performance requirements LED modules for general lighting Performance requirements Luminaire performance - Part 1: General requirements Luminaire performance Part 2-1: Particular requirements for LED luminaires Application of IEC for the assessment of blue light hazard to light sources and luminaires And Lawn And Garden Machinery - Safety - Part 1: General Requirements And Lawn And Garden Machinery - Safety - Part 2-1: Particular Requirements For Hand-Held Drills and Impact Drills And Lawn And Garden Machinery - Safety Part 2-2: Particular Requirements For Screwdrivers And Impact Wrenches And Lawn And Garden Machinery - Safety Part 2-4: Particular Requirements For Hand-Held Sanders And Polishers Other Than Disc Type And Lawn And Garden Machinery - Safety Part 2-5: Particular Requirements For Hand-Held Circular Saws And Lawn And Garden Machinery - Safety Part 2-8: Particular Requirements For Hand-Held Shears and Nibblers TL-471 Page 4 of 12

5 IEC/EN IEC/EN IEC/EN IEC/EN IEC/EN IEC/EN IEC/EN IEC/EN IEC/EN IES LM-16 And Lawn And Garden Machinery - Safety Part 2-9: Particular Requirements For Hand- Held Tappers And Threaders And Lawn And Garden Machinery - Safety Part 2-10: Particular Requirements For Hand-Held Mixers And Lawn And Garden Machinery - Safety Part 2-11 Particular Requirements for Hand-Held Reciprocating Saws And Lawn And Garden Machinery - Safety Part 2-14: Particular Requirements For Hand-Held Planers And Lawn And Garden Machinery - Safety Part 3-1: Particular Requirements For Transportable Table Saws And Lawn And Garden Machinery - Safety Part 3-4: Particular Requirements for Transportable Bench Grinders And Lawn And Garden Machinery Safety - Part 3-6:Transportable Diamond Drills with Liquid System And Lawn And Garden Machinery - Safety Part 3-9: Particular Requirements For Transportable Mitre Saws And Lawn And Garden Machinery - Safety Part 3-10: Particular requirements for Transportable Cut-Off Machines Practical Guide to Colorimetry of Light Sources IES LM-79 Approved Method for Electrical and Photometric Measurements of Solid-State Lighting Products IES TM-30 INMETRO Regulation 389 INMETRO-Ordinance No. 143 INMETRO-Ordinance No. 144 IES Method for Evaluating Light Source Color Rendition LED Lamps with integrated control device, Consists of a single non-detachable unit, operating on AC power distribution network of 60Hz, for nominal voltage of 127 V and/or 220V Amendment on technical regulation for LED lamps (lightemitting diode) with integrated device to the base Conformity assessment requirements for LED lamps with integrated device to the base TL-471 Page 5 of 12

6 INMETRO-Ordinance No. 20 IS (PART 2) Quality Technical Regulation applicable to Luminaires for Public Road Illumination Self-Ballasted LED Lamps For General Lighting Services NOM-030-ENER Luminous Efficacy Of Integral Light Emitting Diode (LED) Lamps For General Lighting Limits and Test Methods NOM-031-ENER SASO 2870 US DOE 10 CFR 429 US DOE 10 CFR 429 US DOE 10 CFR 429 US DOE 10 CFR 430 US DOE 10 CFR 429 and 430 Energy Efficiency For Luminaires With Light Emitting Diodes (LED) For Roadways and Outdoor Public Areas. Energy Efficiency, Functionality and Labeling Requirements For Lighting Products Part 1 Certification, Compliance, and Enforcement for Consumer Products and Commercial and Industrial Equipment (restricted to Compact Fluorescent Lamps) Certification, Compliance, and Enforcement for Consumer Products and Commercial and Industrial Equipment (restricted to Fluorescent Ballasts) Certification, Compliance, and Enforcement for Consumer Products and Commercial and Industrial Equipment (restricted to Metal Halide Ballasts and Fixtures) Appendix W to Subpart B Energy Conservation Program For Consumer Products (Restricted to Compact Fluorescent Lamps) Energy Conservation Program: Test Procedures for Integrated Light Emitting Diode Lamps UAE.S :2013 Labeling Energy efficiency label for electrical appliances part 2: Washing Machines and Dryers SASO 2883:2017 Electrical Clothes Dryers-Energy Performance Requirements and Labelling IEC/EN Household and similar electrical appliances Safety Part 2-34: Particular requirements for motor-compressor SASO 2885:2018 Electrical clothes washing machine--energy and water performance requirements and labelling IEC (washer & dryer) Tumble dryers for household use Methods for measuring the performance IEC/EN Self-ballasted compact fluorescent lamps for general lighting services - Performance requirements 10 CFR 430, subpart B, Appendix BB: Uniform Test Method for Measuring the Input Power, Lumen Output, Lamp Efficacy, Correlated Color Temperature (CCT), Color Rendering Index (CRI), Power Factor, Time to TL-471 Page 6 of 12

7 Failure, and Standby Mode Power of Integrated Light-Emitting Diode (LED) Lamps Electronics DIN/EN/ISO Ergonomics of human-system interaction part 307: analysis and compliance test methods for electronic visual displays (clause 5.2) EK1-ITB2000 Bases for GS-mark tests of IT equipment in combination with visual display units (visual display units within the meaning of the ordinance for work with visual display units) EN Sound system equipment: headphones and earphones associated with personal music players maximum sound pressure level measurement methodology part 2: matching of sets with headphones if either or both are offered separately, or are offered as one package equipment but with standardized connectors between the two allowing to combine components of different manufacturers or different design (clause 5) IEC/EN Information technology equipment safety part 1: general requirements IEC/EN Audio/video, information and communication technology equipment - Part 1: Safety requirements Performance Rating 10 CFR 430, subpart B, appendix B and appendix B1: Uniform Test Method for Measuring the Energy Consumption of Freezers 10 CFR 430, subpart B, appendix A and appendix A1: Uniform Test Method for Measuring the Energy Consumption of Refrigerators, Refrigerator-Freezers, and Miscellaneous Refrigeration Products 10 CFR 430, subpart B, appendix M: Uniform Test Method for Measuring the Energy Consumption of Central Air Conditioners and Heat Pumps 10 CFR Part 431 Subpart C: Commercial Refrigerators, Freezers and Refrigerators-Freezers 10 CFR 430, subpart B, appendix D1: Uniform Test Method for Measuring the Energy Consumption of Clothes Dryers 10 CFR 430, subpart B, appendix D2: Uniform Test Method for Measuring the Energy Consumption of Clothes Dryers 10 CFR 430, subpart B, appendix J1: Uniform Test Method for Measuring the Energy Consumption of Automatic and Semi-automatic Clothes Washers TL-471 Page 7 of 12

8 10 CFR 430, subpart B, appendix J2: Uniform Test Method for Measuring the Energy Consumption of Automatic and Semi-automatic Clothes Washers 10 CFR 430, subpart B, appendix C1: Uniform Test Method for Measuring the Energy Consumption of Dishwashers 10 CFR Part : Uniform Test Method for the measurement of Energy Consumption of Commercial Refrigerators, Freezers and Refrigerators-Freezers 10 CFR Part (d) 10 CFR Part (e) (2) 10 CFR 430, subpart B, appendix X: Uniform Test Method for Measuring the Energy Consumption of Dehumidifiers (Electronic Code of Federal Regulations) ANSI/AHRI 210/ ANSI/AHRI 340/ AHRI Standard AHRI Performance Rating of Unitary Air-Conditioning & Air- Source Heat Pump Equipment Performance rating of commercial and industrial unitary air conditioning and heat pump equipment Performance rating of automatic commercial ice makers Performance rating of variable refrigerant flow (VRF) multi-split air conditioning and heat pump equipment ASHRAE Testing for Rating Residential Water Heaters (excluding gas/oil type water heaters) CAN/CSA-C360 CAN/CSA-C361 CAN/CSA-C373 CEA-2037 Energy performance, water consumption, and capacity of household clothes washers Energy performance and drum volume of household electric clothes dryers Energy performance and water consumption of household dishwashers Determination of television average power consumption EPRI generalized test protocol for calculating the energy efficiency of internal AC-DC and DC-DC power supplies EN Electrical and electronic household and office equipment - Measurement of low power consumption IEC EN MS IEC 60456:2012 (Malaysia) Tumble dryers for household use Methods for measuring the performance Tumble dryers for household use Methods for measuring the performance Clothes washing machines for household use Methods for TL-471 Page 8 of 12

9 measuring the performance BS EN 60456:2005 (Singapore) UAE.S.IEC 60456:2010 IEC EN IEC IEC IEC IEC IEC Clothes washing machines for household use Methods for measuring the performance Clothes washing machines for household use Methods for measuring the performance Part 1: Clothes washing machines for household use Methods for measuring the performance Part 1: Clothes washing machines for household use Methods for measuring the performance Secondary cells and batteries containing alkaline or other non- acid electrolytes portable sealed rechargeable single cells part 1: nickel-cadmium Secondary cells and batteries containing alkaline or other non- acid electrolytes portable sealed rechargeable single cells part 2: nickel-metal hydride Secondary cells and batteries containing alkaline or other non- acid electrolytes secondary lithium cells and batteries for portable applications Methods of measurement for the power consumption of audio, video and related equipment Household electrical appliances measurement of standby power ENERGY STAR Televisions ENERGY STAR Program Requirements Product Specification for Televisions CEA-2037 IEC IEC Determination of Television Average Power Consumption Methods of Measurement for the Power Consumption of Audio, Video and Related Equipment Household Electrical Appliances Measurement of Standby Power CEA: Procedure for DAM Testing Displays ENERGY STAR Program Requirements Product Specification for Displays IEC Methods of Measurement for the Power Consumption of Audio, Video and Related Equipment TL-471 Page 9 of 12

10 IEC Household Electrical Appliances Measurement of Standby Power Computers ENERGY STAR Program Requirements Product Specification for Computers IEC Household Electrical Appliances Measurement of Standby Power EPRI Generalized Test Protocol for Calculating the Energy Efficiency of Internal AC-DC and DC-DC Power Supplies Battery Chargers ENERGY STAR Program Requirements Product Specification for Battery Charging Systems ENERGY STAR Program Requirements Product Specification for Residential Refrigerators and Freezers ENERGY STAR Program Requirements Product Specification for Commercial Refrigerators and Freezers ENERGY STAR Program Requirements Product Specification for Laboratory Grade Refrigerators and Freezers ENERGY STAR Program Requirements Product Specification for Light Commercial HVAC ENERGY STAR Program Requirements Product Specification for Commercial Ice Machines ENERGY STAR Program Requirements Product Specification for Residential Water Heaters ENERGY STAR Program Requirements Product Specification for water coolers ENERGY STAR Program Requirements Product Specification for Dehumidifiers ENERGY STAR Program Requirements Product Specification for Air Source Heat Pump (ASHP) and Central Air Conditioner Equipment Clothes Dryer ENERGY STAR Program Requirements Product Specification for Clothes Dryers Washing Machine ENERGY STAR Program Requirements Product Specification for Clothes Washers Dish Washer ENERGY STAR Program Requirements Product Specification for Residential Dishwashers Heating/Cooling AS1731 Refrigerated display cabinets TL-471 Page 10 of 12

11 EN EN ISO EN/IEC GSO ISO 5151 Air conditioners, liquid chilling packages and heat pumps, with electrically driven compressors, for space heating and cooling- testing and rating at part load conditions and calculation of seasonal performance Refrigerated display cabinets Household refrigerating appliances - characteristics and test methods Non-ducted air conditioners and heat pumps - testing and rating for performance IS 1476 Performance of Household Refrigerating Appliance Refrigerators With or Without Low Temperature Compartment IS IS ISO 5151 ISO ISO MS IEC NOM-022-ENER/SCFI NTE INEN 2206 NTE INEN 2495 SANS Household frost-free refrigerating appliances Refrigerators cooled by internal forced air circulation Characteristics and test methods Photobiological Safety of Lamps and Lamp Systems Non-ducted air conditioners and heat pumps testing and rating for performance Ducted air-conditioners and air-to-air heat pumps -- testing and rating for performance Multiple split-system air-conditioners and air-to-air heat pumps testing and rating for Performance Household refrigerating appliances - characteristics and test methods Energy efficiency and user safety requirements for selfcontained commercial refrigerating appliances. Limits, test methods and labeling. Household refrigerating appliances with or without frost refrigerators with or without low temperature compartment - inspection requirements Energy efficiency ductless air conditioners Household refrigerating appliances - characteristics and test methods SASO 2663:2014 Energy labeling and minimum energy performance requirements for air-conditioners SASO 2681:2013 Non-ducted air conditioners and heat pumps testing and rating performance TL-471 Page 11 of 12

12 SASO 2682:2013 Ducted air-conditioners and air-to-air heat pumps testing and rating for performance Appendix CC to Subpart B of Part 430 Uniform Test Method for Measuring the Energy Consumption of Portable Air Conditioners AHRI: The Air-conditioning, Heating, and Refrigerating Institute ARI: Air-conditioning and Refrigeration Institute ASHRAE: American Society of Heating, Refrigerating and Air-conditioning Engineers CEA: Canadian Electricity Association CFR: Code of Federal Regulations DIN: German Institute for Standardization EK1: Energy kinetics EPRI: Electric Power Research Institute IEC: International Electrotechnical Commission INMETRO: National Institute of Metrology, Quality and Technology MS: Malaysian Standards INEN: Instituto Ecuatoriano de Normalización (Ecuadorian Institute of Standardization) SANS: South African National Standards SASO: Saudi Arabian Standards Organization TL-471 Page 12 of 12