10 CFR 430 Uniform test method for measuring the energy consumption of freezers (appendix B to Subpart B)

Transcription

1 IAS Accreditation Number TL-395 Company Name LTD., Guangzhou Branch Address Block E, No.7-2 Guang Dong Software Science Park Caipin Road, Guangzhou Science City Getdd, Guangzhou People s Republic of China Contact Name Ms. Celia Chen, Quality Manager Telephone Effective Date of Scope July 19, 2015 Accreditation Standard ISO/IEC 17025:2005 Electrical 10 CFR 430 Uniform test method for measuring the energy consumption of refrigerators, refrigerator-freezers, and miscellaneous refrigeration products (appendix A to subpart B) 10 CFR 430 Uniform test method for measuring the energy consumption of freezers (appendix B to Subpart B) 10 CFR 430 Uniform test method for measuring the energy consumption of battery chargers (appendix Y to subpart B) 10 CFR 430 Uniform test method for measuring the energy consumption of ceiling fans (appendix U to subpart B) 10 CFR 431 Commercial refrigerators, freezers and refrigeratorfreezers - energy conservation standards and their effective dates (subpart C 10 CFR part (d)) AHAM AC1:2013 AHAM HRF AHRI 1200:2010 Test method for performance of portable household electric room air cleaners Energy and internal volume of refrigerating appliances Performance rating of commercial refrigerated display merchandisers and storage cabinets ANSI/AHAM HRF Energy, performance and capacity of household refrigerators, refrigerator-freezers and freezers International Accreditation Service, Inc Saturn Street, Suite 100, Brea, California U.S.A Telephone IASInfo@iasonline.org Page 1 of 28

2 ANSI/ASHRAE 72:2014 Method of testing open and closed commercial refrigerators and freezers ASHRAE AS :2003 AS :2003 AS :2003 AS :2003 AS :2003 AS :2003 Method of testing for rating residential water heaters (ANSI approved) Refrigerated display cabinets - terms and definitions Refrigerated display cabinets - general mechanical and physical requirements Refrigerated display cabinets - linear dimensions, areas and volumes Refrigerated display cabinets - general test conditions Refrigerated display cabinets - temperature test Refrigerated display cabinets - classification according to temperatures AS :2003 Refrigerated display cabinets - electrical energy consumption test AS :2003 AS :2003 Refrigerated display cabinets - measurement of the heat extraction rate of the cabinets when the condensing unit is remote from the cabinet Refrigerated display cabinets - test report AS/NZS :2007+A1:2008+A2:2011 Performance of household electrical appliances - refrigerating appliances - part 1: energy consumption and performance AS/NZS :2009+A1:2011 Performance of household electrical appliances refrigerating appliances part 2: energy labelling and minimum energy performance standard requirements AS/NZS Electric water heaters - energy consumption, performance and general requirements (appendix C) AS/NZS :2005+A1:2011 Electric water heaters - energy consumption, performance and general requirements: amendment 1 AS/NZS :2005+A1:2011+A2:2014 Electric water heaters - energy consumption, performance and general requirements: amendment 2 TL-395 Page 2 of 28

3 AS/NZS :2005 Electric water heaters part 2: minimum energy performance standard (MEPS) requirements and energy labelling - Australian government AS/NZS Heat pump water heaters - performance assessment - air source heat pump water heaters AS/NZS :2011 Household and similar electrical appliances - safety - general requirements (IEC Ed 5, MOD) AS/NZS :2011+A1:2012 Household and similar electrical appliances - safety - general requirements (IEC Ed 5, MOD)- amendment 1 AS/NZS :2011+A1:2012+A2:2014 AS/NZS :2002+A1:2003+A2:2003+A3:2009 Household and similar electrical appliances - safety general requirements (IEC Ed 5, MOD) amendment 2 Household and similar electrical appliances-safety-part 2.21: Particular requirements for storage water heaters AS/NZS :2013 Household and similar electrical appliances - safety - particular requirements for storage water heaters (IEC Ed 6, MOD) AS/NZS :2003+A1:2005+A2:2007+A3:2008 Household and similar electrical appliances-safety Part 2.24: Particular requirements for refrigerating appliances, ice-cream appliances and ice-makers AS/NZS :2010 Household and similar electrical appliances - safety - particular requirements for refrigerating appliances, icecream appliances and ice-makers (IEC Ed 7, MOD) AS/NZS :2010+A1:2013 Household and similar electrical appliances-safety Part 2.24: Particular requirements for refrigerating appliances, ice-cream appliances and ice-makers AS/NZS :2010 Household and similar electrical appliances - safety -- part 2-27: particular requirements for appliances for skin exposure to ultraviolet and infrared radiation AS/NZS :2010+A1:2014 TL-395 Page 3 of 28

4 Household and similar electrical appliances-safety Part 2.27: Particular requirements for appliances for skin exposure to optical radiation AS/NZS :2016 Household and similar electrical appliances safety part 2.27: particular requirements for appliances for skin exposure to optical radiation AS/NZS :2004+A1:2005+A2:2005+A3:2007+A4:2007+A5:2008 Household and similar electrical appliances -Safety Part 2.30: Particular requirements for room heaters AS/NZS :2009 Household and similar electrical appliances - safety - particular requirements for room heaters (IEC Ed 4.2, MOD) AS/NZS :2009+A1:2010 AS/NZS :2009+A1:2010+A2:2014 Household and similar electrical appliances - safety - particular requirements for room heaters (IEC Ed 4.2, MOD) Household and similar electrical appliances - safety - particular requirements for room heaters (IEC Ed 4.2, MOD) AS/NZS :2009 Household and similar electrical appliances - safety - particular requirements for room heaters (IEC Ed 4.2, MOD) AS/NZS :2009+A1:2010 AS/NZS :2009+A1:2010+A2:2014 Household and similar electrical appliances - safety - particular requirements for room heaters (IEC Ed 4.2, MOD) Household and similar electrical appliances - safety - particular requirements for room heaters (IEC Ed 4.2, MOD) AS/NZS :2004+A1:2006+A2:2007+A3:2009+A4:2010 Household and similar Electrical appliances -Safety - Part 2.31: Particular requirements for range hoods AS/NZS :2013 Household and similar electrical appliances - safety - particular requirements for range hoods and other cooking fume extractors (IEC Ed 5, MOD) TL-395 Page 4 of 28

5 AS/NZS :2003+A1:2005+A2:2009 Household and similar electrical appliances -Safety Part 2.34: Particular requirements for motor-compressors AS/NZS :2013 Household and similar electrical appliances - safety - particular requirements for motor-compressors AS/NZS :2016 Household and similar electrical appliances safety part 2.34: particular requirements for motor-compressors AS/NZS :2006 Household and similar electrical appliances - safety - particular requirements for electrical heat pumps, airconditioners and dehumidifiers (IEC Ed 4.2, IDT) AS/NZS :2006+A1:2009 AS/NZS :2004+A1:2009 Household and similar electrical appliances-safety Part 2.65: Particular requirements for air-cleaning appliances Household and similar Electrical Appliances - Safety - Part 2.80: Particular requirements for fans AS/NZS :2016 Household and similar electrical appliances safety part 2.80: particular requirements for fans AS/NZS :2012 Household and similar electrical appliances - safety - particular requirements for foot warmers and heating mats AS/NZS :2002+A1:2003+A2:2005+A3:2007 Household and similar electrical appliances-safety Part 2.89: Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant condensing unit or compressor AS/NZS :2010 Household and similar electrical appliances - safety - particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant condensing unit or compressor (IEC Ed 2, MOD) AS/NZS :2010+ A1:2013+A2:2016 Household and similar electrical appliances safety part 2.89: particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant condensing unit or compressor TL-395 Page 5 of 28

6 AS/NZS :2010+ A1:2013 AS/NZS :2007+A1:2009 AS/NZS :2005+A1:2009 AS/NZS :2005+A1:2009+A2:2014 Household and similar electrical appliances safety particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant condensing unit or compressor: amendment 1 Household and similar electrical appliances -Safety Part 2.97:Particular requirements for drives for rolling shutters, awnings, blinds and similar equipment Household and similar electrical appliances -Safety - Part 2.98: Particular requirements for humidifiers Please Provide Title Household and similar electrical appliances -Safety - Part 2.98: Particular requirements for humidifiers AS/NZS :2011 Household and similar electrical appliances - safety - particular requirements for drives for gates, doors and windows BS EN BS EN BS EN 50564:2011 Air conditioners, liquid chilling packages and heat pumps, with electrically driven compressors, for space heating and cooling- testing and rating at part load conditions and calculation of seasonal performance Heat pumps with electrically driven compressors- testing and requirements for marking of domestic hot water units Electrical and electronic household and office equipmentmeasurement of low power consumption BS EN :2010 Household and similar electrical appliances - safety particular requirements for appliances for skin exposure to ultraviolet and infrared radiation BS EN :2013 Household and similar electrical appliances - safety -- part 2-27: particular requirements for appliances for skin exposure to ultraviolet and infrared radiation BS EN :2009+ A11:2012 Household and similar electrical appliances - safety particular requirements for room heaters TL-395 Page 6 of 28

7 BS EN :2014 BS EN :2013 BS EN :2002 Household and similar electrical appliances- safetyparticular requirements for range hoods and other cooking fume extractors Household and similar electrical appliances - safetyparticular requirements for motor-compressors Specification for safety of household and similar electrical appliances - particular requirements - particular requirements for humidifiers intended for use with heating, ventilation, or air-conditioning systems CAN/CSA-C Energy performance and capacity of household refrigerators, refrigerator-freezers, freezers, and wine chillers CSA-C ERRATA-2016 Energy performance and capacity of household refrigerators, refrigerator-freezers, freezers, and wine chillers CAN/CSA-C358:2003 Energy consumption test methods for household electric ranges EN :2016 Safety of machinery electrical equipment of machines part 1: general requirements EN :2002+A11:2004+A1:2004+A12:2006+A2:2006+A13:2008 1: general requirements EN :2002+A11:2004+A1:2004+A12:2006+A2:2006+A13:2008+A14:2010 1: general requirements EN603351:2002+A11:2004+A1:2004+A12:2006+A2:2006+A13:2008+A14:2010+A15: 1: general requirements EN :2012 EN :2012+A11:2014 1: general requirements Household and similar electrical appliances- safetygeneral requirements EN :2003+A1:2005+A2:2008 Household and similar electrical appliances - safety -part 2-21: particular requirements for storage water heaters EN :2003+A11:2004+A1:2005+A2:2007+A12:2009 TL-395 Page 7 of 28

8 2-24: particular requirements for refrigerating appliances, ice-cream appliances and ice-makers EN : : particular requirements for refrigerating appliances, ice-cream appliances and ice makers EN :2003+A1:2008+A2:2008 EN :2003+A1:2004+A2:2007 Household and similar electrical appliances - Safety - Part 2-27: Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation Household and similar electrical appliances - Safety - Part 2-30: Particular requirements for room heaters EN :2009 Household and similar electrical appliances -Safety -Part 2-30 :Particular requirements for room heaters EN :2003+A1:2006+A2:2009 EN :2002+A11:2004+A1:2005+A2:2009 Household and similar electrical appliances-part 2-31: Particular requirements for range hoods Household and similar electrical appliances -Safety - Part 2-34: Particular requirements for motor-compressors EN :2003+A11:2004+A12:2005+A1:2006+A2:2009+A13:2012 EN :2003+A1:2008+A11:2012 EN :2003+A1:2004+A2:2009 EN :2003+A1:2007+A2:2012 Household and similar electrical appliances - Safety - Part 2-40:Particular requirements for electrical heat pumps,air-conditioners and dehumidifiers Household and similar electrical appliances - Safety - Part 2-65:Particular requirements for air-cleaning appliances Household and similar electrical appliances - Safety - Part 2-80:Particular requirements for fans Household and similar electrical appliances - Safety - Part 2-81:Particular requirements for foot warmers and heating mats TL-395 Page 8 of 28

9 EN :2002+A11:2004+A1:2005+A2:2007 Household and similar electrical appliances-safety-part 2-89:Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant condensing unit or compressor EN : : particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant unit or compressor EN :2006+A11:2008+A2:2010 EN :2003+A1:2005+A2:2008 Household and similar electrical appliances-safety Part 2-97: Particular requirements for drives for rolling shutters, awnings, blinds and similar equipment Household and similar electrical appliances - Safety - Part 2-98: Particular requirements for humidifiers EN 62552:2013 Household refrigerating appliances - characteristics and test methods EVS-EN :2003/ A11:2009 Household and similar electrical appliances - safety part-103: particular requirements for drives for gates, doors and windows GS IEC 62552:2008 Household refrigerating appliances - Characteristics and test methods IEC :2001+ A1:2004+A2:2006 1: general requirements IEC :2010 IEC :2010+A1:2013 1: general requirements 1: general requirements IEC :2002+ A1:2004+A2:2008 Household and similar electrical appliances - safety part 2-21: particular requirements for storage water heaters IEC : : particular requirements for storage water heaters TL-395 Page 9 of 28

10 IEC :2002+A1:2005+A2:2007 Household and similar electrical appliances - Safety - Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice-makers IEC :2010 IEC :2010+A1: : particular requirements for refrigerating appliances, ice-cream appliances and ice makers 2-24: particular requirements for refrigerating appliances, ice-cream appliances and ice makers IEC :2002+A1:2004+A2:2007 Household and similar electrical appliances - Safety - Part 2-27: Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation IEC :2009 IEC :2009+A1: : particular requirements for appliances for skin exposure to ultraviolet and infrared radiation 2-27: particular requirements for appliances for skin exposure to ultraviolet and infrared radiation IEC :2002+A1:2004+A2:2007 Household and similar electrical appliances - Safety - Part 2-30: Particular requirements for room heaters IEC :2009 Household and similar electrical appliances - safety -part 2-30: particular requirements for room heaters IEC :2002+A1:2006+A2:2008 Household and similar electrical appliances - Safety - Part 2-31: Particular requirements for range hoods IEC : : particular requirements for range hoods and other cooking fume extractors IEC :2002+A1:2004+A2: : particular requirements for motor-compressors IEC : : particular requirements for motor-compressors TL-395 Page 10 of 28

11 IEC :2002+A1:2005+A2: : particular requirements for electrical heat pumps, air conditioners and dehumidifiers IEC :2013 IEC :2002+A1: : particular requirements for electrical heat pumps, air-conditioners and dehumidifiers 2-65: particular requirements for air-cleaning appliances IEC :2002+A1:2004+A2: : particular requirements for fans IEC : : particular requirements for fans IEC :2002+ A1:2007+A2:2011 Household and similar electrical appliances - safety part 2-81: particular requirements for foot warmers and heating mats IEC : : particular requirements for humidifiers intended for use with heating, ventilation, or air-conditioning systems IEC :2002+A1:2005+A2: : particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant condensing unit or compressor IEC :2010 IEC :2010+A1: : particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant unit or compressor 2-89: particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant unit or compressor IEC :2002+ A1:2004+A2:2008 Household and similar electrical appliances safety part 2-97: particular requirements for drives for rolling shutters, awnings, blinds and similar equipment TL-395 Page 11 of 28

12 IEC :2002+A1:2004+A2:2008 IEC :2006+ A1: : particular requirements for humidifiers Household and similar electrical appliances - safety part 2-103: particular requirements for drives for gates, doors and windows IEC 62552:2007 IEC :2015 IEC :2015 IEC :2015 IS 2082:1993 Household refrigerating appliances - characteristics and test methods Household refrigerating appliances - characteristics and test methods - part 1: general requirements Household refrigerating appliances - characteristics and test methods - part 2: performance requirements Household refrigerating appliances - characteristics and test methods - part 3: energy consumption and volume Stationary storage type electric water heaters IS 15750:2006 (R2012) Household frost-free refrigerating appliances - refrigerators cooled by internal forced air circulation - characteristics and test methods - specification ISO 15502:2005 ISO :2005 ISO :2005 JIS C 9801:2006 MS IEC 62552:2011 NOM-015-ENER: 2012 NOM-022-ENER-SCFI: 2008 PREN 16825: 2015 Household refrigerating appliances -- characteristics and test methods Refrigerated display cabinets -- part 1: vocabulary Refrigerated display cabinets -- part 2: classification, requirements and test conditions Household refrigerating appliances - characteristics and test methods Household refrigerating appliances characteristics and test methods Energy efficiency for household refrigerators and freezers - specifications and test methods Energy efficiency and user safety requirements for selfcontained commercial refrigeration appliances - boundaries, testing and labeling methods Commercial service refrigerated cabinets and counters intended for use in commercial kitchens - definition of performance characteristics and energy consumption TL-395 Page 12 of 28

13 SANS 62552:2008+A1:2010+A2:2015 Household refrigerating appliances-characteristics and test methods SANS 1691:2015 SASO 2663:2014 Household refrigerating appliances - characteristics and test methods Energy labelling and minimum energy performance requirements for air-conditioners SASO 2664:2013 Energy performance and capacity of household refrigerators, refrigerator freezers, and freezers UAE.S IEC 62552:2013 UL SUBJECT 2272:2016 Ed.1 Household refrigerating appliances characteristics and test methods Outline of investigation for electrical systems for selfbalancing scooters UL SUBJECT 2272:2016 Ed.2 Outline of investigation for electrical systems for sdlfbalancing scooters Electrical/Electronics Energy Star Program requirements product specification for audio/video version 3.0 ENERGY STAR test method for audio/video, ENERGY STAR program requirements product specification for audio/video, rev. Aug-2010 Test method for calculating the energy efficiency of single voltage external Ac-Dc and Ac Ac power supplies, Aug. 11, 2004 Product specification for telephony version 2.2 ENERGY STAR test method for telephony, ENERGY STAR program requirements for telephony, rev. Aug 2010, section 4, page 9 IEC Standard 62301: household electrical appliances - measurement of standby power Product specification for computers version 5.2 ENERGY STAR computer test method, ENERGY STAR program requirements product specification for computers, version 5.2 page 23 EPRI generalized test protocol for calculating the energy efficiency of internal AC-D and DC- DC power supplies IEC Standard 62301: household electrical appliances - measurement of standby power Product specification for displays version 6.0 ENERGY STAR test method for displays, ENERGY STAR program requirements product specification for displays, page 11 VESA FPDM Standard TL-395 Page 13 of 28

14 IEC Standard 62301, Ed. 1.0: household electrical appliances measurement of standby Power IEC Standard 62087, Ed. 2.0: methods of measurement for the power consumption of audio, video and related equipment Product specification for imaging equipment version 1.2 & 2.0 Imaging equipment test method, versions 1.2, product specification for imaging equipment, page 20 IEC Standard 62301, Ed 1.0: household electrical appliances measurement of standby Power EPRI generalized test protocol for calculating the energy efficiency of internal AC-DC and DC-DC power supplies Test method for calculating the energy efficiency of single-voltage external AC-DC and AC- AC power supplies For Set-Top Boxes, Version 3.0 Test method for set-top boxes version 2.0, section 4, page 11 Cable, satellite, and telecom service providers CEA: procedure for DAM testing Product specification for residential refrigerators and freezers version 5.0 and 10 CFR 430, subpart B, appendix A Product specification for residential refrigerators and freezers version 5.0, 10 CFR 430, subpart B, appendix B Product specification for water coolers version 1.3 and 2.0 Test method for water coolers (rev. May-2013) Product specification for room air conditioners version 4.0 and 10 CFR 430, subpart B, appendix F ASHRAE Standard (RA 2009) method of testing for rating room air conditioners AHAM RAC : room air conditioners Product specification for refrigerated beverage vending machines version CFR 431, subpart Q: energy efficiency program for certain commercial and industrial equipment 10 CFR : uniform test method for the measurement of energy consumption of TL-395 Page 14 of 28

15 refrigerated bottled or canned beverage vending machines ASHRAE Standard : methods of testing for rating vending machines for bottled, canned, and other sealed beverages Product specification for commercial refrigerators and freezers version CFR Part 431, subpart C: energy efficiency program for certain commercial and industrial Equipment 10 CFR Part : Uniform test method for the measurement of energy consumption of commercial refrigerators, freezers, and refrigerator-freezers 10 CFR Part (d): energy conservation standards and their effective dates ANSI/ASHRAE Standard : method of testing commercial refrigerators and freezers ANSI/AHAM Standard HRF : American national standard energy, performance and capacity of household refrigerators, refrigerator - freezers and freezers ANSI/AHAM Standard HRF : energy, performance and capacity of household refrigerators, refrigerator-freezers and freezer ENERGY STAR program requirements for commercial refrigerators and freezers version CFR Part 431 Subpart C, 10 CFR Part : uniform test method for the measurement of energy consumption of commercial refrigerators, freezers, and refrigerators-freezers Product specification for automatic commercial ice makers version CFR Part 431, subpart H with the guidance included in Section 4.1 ARI Standard : performance rating of automatic commercial ice makers Product specification for air source heat pump (ASHP) and central air conditioner equipment version 4.1 & CFR part 430, subpart B, appendix M: energy conservation program for consumer Products ANSI/AHRI Standards 210/ : performance rating of unitary air-conditioning & air source heat pump equipment AHRI 210/ : performance rating of unitary air-conditioning & air-source heat pump Equipment ARI Standard 210/240: operating condition A: 95 F outdoor air temperature, 80 F dry bulb/67 F wet bulb indoor coil air entering conditions TL-395 Page 15 of 28

16 ENERGY STAR program requirements product specification for residential water heaters version CFR part 430, subpart B appendix E, 10 CFR 431, subpart G: (electronic code of federal regulations), solar rating and certification corporation (SRCC) OG-300 ANSI Z /CSA : gas water heaters, volume I, storage water heaters with input ratings of 75,000 btu per hour or less ANSI Z /CSA : gas-fired water heaters, volume III, storage water heaters with input ratings above 75,000 btu per hour, circulating and instantaneous ENERGY STAR program requirements product specification for residential water heaters version 3.0 ( for gas water heater) 10 CFR 430, Subpart B, Appendix E: uniform test method for measuring the energy consumption of water heaters ENERGY STAR program requirements product specification for dehumidifiers eligibility criteria version CFR Part 430, appendix X, subpart B: energy conservation program for consumer Products ANSI/AHAM DH : energy and internal volume of refrigerating appliances CAN/CSA StandardC (Reaffirmed 2000): performance of dehumidifiers ENERGY STAR program requirements product specification for room air cleaners eligibility criteria version 1.2 ANSI/AHAM AC : test method for performance of portable household electric room air cleaners UL 867 Ed. 5.0: standard for electrostatic air cleaners IEC Ed. 1.0: household electrical appliances - measurement of standby power Geothermal Heat Pumps, Version 4.1 & 5.0 ANSI/AHRI Standards 210/240: performance rating of unitary air-conditioning & air-source ARI Standards 210/240: operating condition A: 95 F outdoor air temperature, 80 F dry bulb/67 F wet bulb indoor coil air entering conditions Program Requirements Product Specification for Residential Water Heaters Version 3.0 Environmental TL-395 Page 16 of 28

17 ASTM B117 ASTM E96/E96M ASTM G154 Standard practice for operating salt spray (fog) apparatus Standard test methods for water vapor transmission of materials Standard practice for operating fluorescent ultraviolet (UV) lamp apparatus for exposure of nonmetallic materials Heating/Cooling AHRI Forced-circulation air-cooling and air-heating coils (including addenda 1, 2 and 3) ANSI/AHRI ANSI/AHRI Central station air handling units Performance rating of room fan-coils ANSI/ASHRAE Standard Methods of testing for rating electrically driven unitary air-conditioning and heat pump equipment ANSI/ASHRAE Standard Performance rating of single package vertical airconditioners and heat pumps ASTM E1509:2004 Standard specification for room heaters, pellet fuelburning type ISO 13253:2011 Ducted air-conditioners and air-to-air heat pumps -- testing and rating for performance ISO 5151:2010 ISO 9806:2013 SASO 2681:2013 SASO 2682:2013 SRCC SRCC OG SRCC TM Non-ducted air conditioners and heat pumps -- testing and rating for performance Solar energy -- solar thermal collectors -- test methods Air Conditioners and heat pumps to be mounted without air ducts testing and performance assessment methods Ducted air conditioners and heat pumps: testing and rating performance Minimum standards for solar water heating systems Certification & listing programs- solar system certification programs Solar domestic water heating component test and analysis protocol Physical AATC 127 Water resistance: hydrostatic pressure test TL-395 Page 17 of 28

18 ANSI Z97.1 Standard - safety glazing materials used in buildings - safety performance specifications and methods of test (sections 4 (except 4.7.2) and 5 (except and )) AS/NZS 2208 AS/NZS 4020:2005 AS AS ASTM C67 ASTM C473 ASTM C666/C666M ASTM C794 ASTM D226/D226M Safety glazing materials in buildings Testing of products for use in contact with drinking water Windows - methods of test - air infiltration test Windows - methods of test - water penetration resistance test Standard test methods for sampling and testing brick and structural clay tile Standard test methods for physical testing of gypsum panel products Standard test method for resistance of concrete to rapid freezing and thawing Standard test method for adhesion-in-peel of elastomeric joint sealants Standard specification for asphalt-saturated organic felt used in roofing and waterproofing (table 1 physical requirements only) ASTM D256 Standard test methods for determining the Izod pendulum impact resistance of plastics ASTM D412 ASTM D434 ASTM D570 ASTM D618 ASTM D751 ASTM D756 ASTM D779 Standard test methods for vulcanized rubber and thermoplastic elastomers tension Standard test method for resistance to slippage of yarns in woven fabrics using a standard seam (except standard G155) Standard test method for water absorption of plastics Standard practice for conditioning plastics for testing Standard test methods for coated fabrics Practice for determination of weight and shape changes of plastics under accelerated service conditions Standard test method for determining the water vapor resistance of sheet materials in contact with liquid water by the dry indicator method TL-395 Page 18 of 28

19 ASTM D790 Standard test methods for flexural properties of unreinforced and reinforced plastics and electrical insulating materials ASTM D828 ASTM D882 ASTM D903 ASTM D1004 ASTM D1037 ASTM D1204 ASTM D1761 ASTM D1970/D1970M Standard test method for tensile properties of paper and paperboard using constant-rate-of-elongation apparatus Standard test method for tensile properties of thin plastic sheeting Standard test method for peel or stripping strength of adhesive bonds Standard test method for tear resistance (graves tear) of plastic film and sheeting Standard test methods for evaluating properties of woodbase fiber and particle panel materials (sections 14, 15, and 21 only) Standard test method for linear dimensional changes of non-rigid thermoplastic sheeting or film at elevated temperature Standard test methods for mechanical fasteners in wood Standard specification for self-adhering polymer modified bituminous sheet materials used as steep roofing underlayment for ice dam protection ASTM D2136 Standard test method for coated fabrics lowtemperature bend test ASTM D2299 ASTM D2394 ASTM D2395 ASTM D2523 ASTM D2990 ASTM D3045 ASTM D3746/D3746M Recommended practice for determining relative stain resistance of plastics Standard test methods for simulated service testing of wood and wood-base finish flooring Standard test methods for density and specific gravity (relative density) of wood and wood-based materials Standard practice for testing load-strain properties of roofing membranes Standard test methods for tensile, compressive, and flexural creep and creep-rupture of plastics Standard practice for heat aging of plastics without load Standard test method for impact resistance of bituminous roofing systems TL-395 Page 19 of 28

20 ASTM D4442 ASTM D4869/D4869M ASTM D4933 Standard test methods for direct moisture content measurement of wood and wood-based materials Standard specification for asphalt-saturated organic felt underlayment used in steep slope roofing Standard guide for moisture conditioning of wood and wood-base materials ASTM D5034 Standard test method for breaking strength and elongation of textile fabrics (grab test) ASTM D5602/D5602M ASTM D5635/D5635M ASTM D5892 Standard test method for static puncture resistance of roofing membrane specimens Standard test method for dynamic puncture resistance of roofing membrane specimens Standard specification for type IV polymer-modified asphalt cement for use in pavement construction ASTM D7032 Standard specification for establishing performance ratings for wood-plastic composite and plastic lumber deck boards, stair treads, guards, and handrails (sections 4 (except biodeterioration and fire tests), 5 (except flexural performance) and 6 ASTM E (R2009) ASTM E783-02(R2010) ASTM F1033 ASTM F1066 Test method for water penetration of exterior windows, skylights, doors and curtain walls by uniform static air pressure difference Standard test method for field measurement of air leakage through installed exterior windows and doors Standard test method for comparing lift-off correction media Standard specification for vinyl composition floor tile ASTM F1306 Standard test method for slow rate penetration resistance of flexible barrier films and laminates ASTM F1344 ASTM F1700 ASTM F1859 ASTM F1861 ASTM F1913 Standard specification for rubber floor tile Standard specification for solid vinyl floor tile Standard specification for rubber sheet floor covering without backing Standard specification for resilient wall base Standard specification for vinyl sheet floor covering without backing TL-395 Page 20 of 28

21 ASTM F2169 ASTM G21 BS 6206 BS :2014 BS :2014 BS A3:2014 BS A1:2014 BS A BS :2000+A1:2014 BS A1:2014 BS A2:2014 Standard specification for resilient stair treads Standard practice for determining resistance of synthetic polymeric materials to fungi Specification for impact performance requirements for flat safety glass and safety plastics for use in building Suitability of non-metallic materials and products for use in contact with water intended for human consumption with regard to their effect on the quality of the waterspecification Suitability of non-metallic materials and products for use in contact with water intended for human consumption with regard to their effect on the quality of the watermethods of test- samples for testing Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water- methods of testodour and flavour of water- general method of test Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water- methods of testodour and flavour of water- method of testing odours and flavours imparted to water by multi-layered hoses and pipes Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of water- methods of testodour and flavour of water. method of testing tastes imparted to water by hoses for conveying water for food and drink preparation Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water- methods of testappearance of water Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of water- methods of testgrowth of aquatic micro-organisms test Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water- methods of testthe extraction of substances that may be of concern to public health TL-395 Page 21 of 28

22 BS A CAN/CGSB-12.1-M90 Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water- methods of testthe extraction of metals Tempered or laminated safety glass CPSC 16 CFR 1201 Safety standard for architectural glazing materials (except simulated weathering) EN EN EN EN EN Glass in buildings thermally toughened soda lime silicate safety glass Glass in building- thermally toughened soda lime silicate safety glass- evaluation of conformity/product standard Glass in building - thermally toughened soda lime silicate safety glass - part 2: evaluation of conformity/product standard Glass in building- heat-soaked thermally-toughened soda lime silicate safety glass- definition and description Glass in building- heat-soaked thermally-toughened soda lime silicate safety glass- evaluation of conformity/product standard ICC ES AC07 Test methods referenced in sections 3.3.1, 3.3.9, , , , 3.4.2, 3.4.6, 3.4.7, 3.4.8, , , , , 4.4, 4.5, 4.7, 4.8, 4.9 and 4.11 ICC ES AC39 ICC ES AC48 ICC ES AC75 ICC ES AC109 Test methods referenced in section 4.0 (except sections 4.3, 4.6 and 4.14) Test methods referenced in sections 3.0 and 4.0 (except sections and 4.6) Test methods referenced in section 4.0 (except sections 4.1 and 4.4) Test methods referenced under sections 4 (except flexural, biodeterioration and fire tests), 5 (except flexural performance) and 6 test methods referenced in sections 4.1, 4.2, 4.4 (UV Exposure only), 4.5, 4.6 and 4.7 ICC ES AC148 Test methods referenced in sections 4.1, 4.2, 4.3, 4.4, 4.5, 4.6, 4.7 and 4.8 ICC ES AC160 Test methods referenced in section 4.0 ICC ES AC165 Test methods referenced in tables 1 and 2 TL-395 Page 22 of 28

23 ICC ES AC174 Test methods referenced under sections 3.0 (except sections 3.4, 3.9 and 3.10) ICC ES AC180 Test methods referenced in sections 3.0 and 4.0 ICC ES AC188 ICC ES AC207 ICC ES AC273 TAS 201 Test methods referenced in table 1 (except cycling and elongation) Test methods referenced in sections 3.8 and 4.0 (except sections 4.5 and 4.8) Test methods referenced under section 4.0 (except section 4.2.8) Impact test procedures Plumbing AS Valves primarily for use in heated water systems - protection valves ASME A / CSA B125.1 ASME A / CSA B45.1 AS/NZS 2492:2007 AS/NZS :2011 AS/NZS :2008 AS/NZS 4158:2003/ AMDT 1:2005 Plumbing supply fittings Ceramic plumbing fixtures Cross-linked polyethylene (PE-X) pipes for pressure applications Mechanical jointing fittings for use with crosslinked polyethylene (PE-X) for pressure applications - plastics piping systems for hot and cold water installations - crosslinked polyethylene (PE-X) - Fittings (ISO :2003, MOD) Polybutylene (PB) plumbing pipe systems - mechanical jointing fittings for use with polybutylene (PB) pipes for hot and cold water applications Thermal-bonded polymeric coatings on valves and fittings for water industry purposes ATS Technical specification for plumbing and drainage products - jointing materials ATS Technical specification for plumbing and drainage products - appliances (low hazard rating) EN 1213:1999 EN :2014 Building valves - copper alloy stopvalves for potable water supply in buildings - tests and requirements Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure- TL-395 Page 23 of 28

24 unplasticized poly(vinyl chloride) (PVC-U)- specifications for pipes, fittings and the system NSF 14:2015 NSF/ANSI 61 NSF/ANSI 372 Plastics piping system components and related materials Drinking water system components health effects by most governmental agencies that regulate drinking water supplies Drinking water system components - lead content WaterSense specification for showerheads WaterSense specification for high-efficiency lavatory faucet WaterSense specification for tank-type toilets WaterSense specification for flushing urinals WRAS-TAD TCS no.: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,1212.6, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,, , , TL-395 Page 24 of 28

25 4001.3, , , , , , , , , , , , , , , , , and Structural AAMA Methods of test for exterior walls AAMA/WDMA/CSA 101/I.S.2/A Specification for windows, doors, and skylights AS AS AS AS ASTM C271/C271M ASTM C273/C273M ASTM E (R2012) ASTM C297/C297M ASTM E330/E330M-2014 ASTM C365/C365M ASTM C393/C393M ASTM E (R2008) ASTM C1178/C1178M Windows - methods of test - deflection test Windows - methods of test - operating force test Windows - methods of test - ultimate strength test Windows and external glazed doors in buildings Standard test method for density of sandwich core materials Standard test method for shear properties of sandwich core materials Determining the rate of air leakage through exterior windows, curtain walls, and doors under specified pressure differences across the specimen Standard test method for flatwise tensile strength of sandwich constructions Standard test method for structural performance of exterior windows, doors, skylights and curtain walls by uniform static air pressure difference Standard test method for flatwise compressive properties of sandwich cores Standard test method for core shear properties of sandwich constructions by beam flexure Standard test method for field determination of water penetration of installed exterior windows, skylights, doors, and curtain walls, by uniform or cyclic static air pressure difference Standard specification for coated glass mat waterresistant gypsum backing panel (except fire tests) TL-395 Page 25 of 28

26 ASTM C1185 Standard test methods for sampling and testing nonasbestos fiber-cement flat sheet, roofing and siding shingles, and clapboards ASTM C1186 Standard specification for flat fiber-cement sheets (except fire tests) ASTM C1278/C1278M ASTM C1396/C1396M ASTM D648 ASTM D905 ASTM D1002 ASTM D1781 ASTM D1784 ASTM D2915 ASTM E72 ASTM E1233/E1233M ASTM E1886 Standard specification for fiber-reinforced gypsum panel (except fire tests) Standard specification for gypsum board (except fire tests) Standard test method for deflection temperature of plastics under flexural load in the edgewise position Standard test method for strength properties of adhesive bonds in shear by compression loading Standard test method for apparent shear strength of single-lap-joint adhesively bonded metal specimens by tension loading (metal-to-metal) Standard test method for climbing drum peel for adhesives Standard specification for rigid poly (vinyl chloride) (PVC) compounds and chlorinated poly (vinyl chloride) (CPVC) compounds Practice for sampling and data-analysis for structural wood and wood-based products Standard test methods of conducting strength tests of panels for building construction Standard test method for structural performance of exterior windows, doors, skylights, and curtain walls by cyclic air pressure differential Standard test method for performance of exterior windows, curtain walls, doors, and impact protective systems impacted by missile(s) and exposed to cyclic pressure differentials ASTM E1996 Standard specification for performance of exterior windows, curtain walls, doors, and impact protective systems impacted by windborne debris in hurricanes EN Glass in building - insulating glass units - part 4: methods of test for the physical attributes of edge seals (clause 5.1) TL-395 Page 26 of 28

27 ICC ES AC04 Sandwich panels (test methods referenced in sections 4 and 5) ICC ES AC05 ICC ES AC37 ICC ES AC38 ICC ES AC51 Sandwich panel adhesives (test methods referenced in sections 4 and 5) Test methods referenced in section 3.0 (except and 3.3) Test methods referenced in sections 3.1, 3.3, 4.0 and 5.2) Precast stone veneer ICC ES AC120 Test methods referenced in section 4.0 ICC ES AC151 Test methods referenced in section 3.0 (except and 3.1.2) ICC ES AC161 Test methods referenced in section 3.0 and 4.0 ICC ES AC175 Test methods referenced in section 3.0 (except 3.1, 3.1.1, 3.1.2, 3.1.3, 3.1 and 3.2.2) ICC ES AC300 Test methods referenced in section 3.0 and 4.0 ICC ES AC386 TAS 202 TAS 203 Test methods referenced in section 3.1 (except sections and ) Criteria for testing impact and non-impact resistant building envelope components using uniform static air pressure loading Criteria for testing products subject to cyclic wind pressure loading Thermal ASTM C1029 BS :2000 ICC ES AC02 ICC ES AC12 Standard specification for spray-applied rigid cellular polyurethane thermal insulation Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water. High temperature tests Test methods referenced in section 3.0 (except Sections 3.3; 3.3.2; 3.5 and 3.6.1) Test methods referenced in section 3.0 and 4.0 (except 3.1,3.2;3.3, 3.4.1,3.4.2,3.6, 4.1, 4.2, 4.3, 4.4, 4.5.1, , , , 4.5.2, 4.5.3, 4.5.4, 4.5.5, TL-395 Page 27 of 28

28 and thermal conductivity, hot surface performance, oxygen index (ASTM standard C871)) ICC ES AC220 Test methods referenced in section 3.0 (except 3.1,3.2 and 3.4) AATCC- American Association of Textile Chemists and Colorists AHAM- Association of Home Appliance Manufacturers AHRI- The Air-condition, Heating, and Refrigeration Institute ARI- The Air-conditioning and Refrigeration Institute ASHRAE- American Society of Heating, Refrigerating and Air-conditioning Engineers ATS- Acceptance Testing Specifications CEA- Canadian Electricity Association CSA- Canadian Standards Association EVS- Estonian Centre for Standardisation IEC- International Electrotechnical Commission JIS- Japanese Industrial Standards NSF- National Sanitation Foundation SASO- Saudi Arabian Standards Organization SRCC- Solar Rating & Certification Corporation VESA- The Video and Electronics Standards Association FPDM- Flat Panel Display Measurement WRAS-TAD- Water Regulations Advisory Scheme- Test and Acceptance Document TL-395 Page 28 of 28