8501 E. Pleasant Valley Rd. Cleveland, OH 44131

Transcription

1 IAS Accreditation Number Company Name Address Contact Name TL E. Pleasant Valley Rd. Cleveland, OH Benjamin Barker Manager, Accreditations Telephone (416) Effective Date of Scope April 11, 2016 Accreditation Standard ISO/IEC 17025:2005 Energy Star 10 CFR 430, Subpart B, Appendix A, A1: uniform test method for measuring the energy consumption of electric refrigerators and electric refrigerator-freezers 10 CFR 430, Subpart B, Appendix B, B1: uniform test method for measuring the energy consumption of freezers 10 CFR 430, Subpart B, Appendix E: uniform test method for measuring the energy consumption of water heaters 10 CFR 430, Appendix N (Electronic Code of Federal Regulations): uniform test method for measuring the energy consumption of furnaces and boilers AHRI-BTS-2000: Method to Determine Efficiency of Commercial Space Heating Boilers ANSI/AHAM HRF-1: energy and internal volume of refrigerating appliances ANSI/AHAM Standard DH-1, Clauses 4, 5, and 7: dehumidifiers ANSI/ASHRAE 124: methods of testing for rating combination space-heating and water-heating appliances ANSI/ASHRAE Standard 72: method of testing commercial refrigerators and freezers ASHRAE 118.2, Section 11.24: method of testing for rating residential water heaters ASHRAE Standard 32.1: methods of testing for rating vending machines for bottled, canned, and other sealed beverages CAN/CSA-C749: performance of dehumidifiers CSA Standard C814: energy performance of ceiling fans ENERGY STAR program requirements for commercial ice machines International Accreditation Service, Inc Saturn Street, Suite 100, Brea, California U.S.A Telephone IASInfo@iasonline.org Page 1 of 22

2 ENERGY STAR program requirements for furnaces partner commitments ENERGY STAR program requirements for residential ceiling fans ENERGY STAR program requirements product specification for boilers ENERGY STAR program requirements product specification for commercial refrigerators and freezers ENERGY STAR program requirements product specification for dehumidifiers eligibility criteria ENERGY STAR program requirements product specification for refrigerated beverage vending machines ENERGY STAR program requirements product specification for residential refrigerators and freezers, version 4.1 ENERGY STAR program requirements product specification for residential water heaters Solar Rating and Certification Corporation (SRCC) OG-300 certification Electrical ANSI/NEMA C18.1M, Part 1 ANSI/NEMA C18.1M, Part 2 Standard for portable primary cells and batteries with aqueous electrolyte general and specifications Standard for portable primary cells and batteries with aqueous electrolyte safety standard ANSI/NEMA C18.2M, Part 1 Standard for portable rechargeable cells and batteries general specifications ANSI/NEMA C18.2M, Part 2 Standard for portable rechargeable cells and batteries safety standard ANSI/NEMA C18.3M, Part 1 ANSI/NEMA C18.3M, Part 2 CAN/CSA E62133 CSA C22.2 NO. 61 CSA C22.2 NO. 100 CSA C22.2 NO. 139 CSA C22.2 NO. 250 Standard for portable lithium primary cells and batteries general and specifications Standard for portable lithium primary cells and batteries safety standard Secondary cells and batteries containing alkaline or other non-acid electrolytes - safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications Household cooking ranges Motors and generators Electrically operated valves Luminaires (tri-national standard, with UL 1598 and NMX-J-307/1-ANCE) TL-266 Page 2 of 22

3 CSA/UL Information technology equipment - safety - part 1: general requirement CSA/UL Safety requirements for electrical equipment for measurement, control, and laboratory use - part 1: general requirements CSA/UL S (ANSI) EN/IEC EN/IEC EN/IEC EN/IEC EN/IEC EN/IEC EN/IEC EN/IEC EN/IEC EN/IEC EN/IEC IEC UL 174 UL 372 UL 412 Electric and electronic test, measuring, controlling, and related equipment: general requirement Primary batteries - part 1: general Primary batteries - part 2: physical and electrical specifications Primary batteries - part 3: watch batteries Primary batteries - part 4: safety of lithium batteries Primary batteries - part 5: safety of batteries with aqueous electrolyte Secondary cells and batteries containing alkaline or other non-acid electrolytes - portable sealed rechargeable single cells - part 1: nickel-cadmium Secondary cells and batteries containing alkaline or other non-acid electrolytes - portable sealed rechargeable single cells - part 2: nickel-metal hydride Secondary cells and batteries containing alkaline or other non-acid electrolytes - safety requirements for portable sealed secondary cells and for batteries made from them, for use in portable applications Safety of primary and secondary lithium cells and batteries during transport Secondary lithium-ion cells for the propulsion of electric road vehicles - part 1: performance testing Secondary lithium-ion cells for the propulsion of electric road vehicles - part 2: reliability and abuse testing Ballasts for tubular fluorescent lamps - general and safety requirements Household electric storage-tank water heaters Primary safety controls for gas- and oil-fired appliances Refrigeration unit coolers TL-266 Page 3 of 22

4 UL 429 UL 465 UL 467 UL 484 UL 559 UL 574 Electrically operated valves Standard for safety central cooling air conditioners Electrical grounding and bonding equipment Room air conditioners Standard for safety heat pumps Electric oil heater UL 642 UL 732 UL 834 UL 858 Oil-fired water heaters Heating, water supply, and power boilers -- electric Household electric ranges UL 873 Electrical temperature-indicating and - regulating equipment UL 921 UL 991 UL 1004 UL 1020 UL 1042 UL 1054 UL 1081 UL 1096 UL 1240 UL 1261 UL 1278 UL 1453 UL 1556 UL 1598 Commercial electric dishwashers Tests for safety-related controls employing solid-state devices Electric motors Thermal cutoffs for use in electrical appliances and components Electric baseboard heating equipment Special-use switches Electric swimming pool pumps, filters and chlorinators Standard for safety electric central air heating equipment Electric commercial clothes-drying equipment Electric water heaters for pools and tubs Movable and wall -- or ceiling-hung electric room Electric booster and commercial storage tank water heaters Standard for safety electric coin-operated clothes-drying equipment Luminaires TL-266 Page 4 of 22

5 UL 1698 Standard for safety technical panel for personal emergency response equipment UL 1973 UL 1989 UL 1995 UL 2021 UL 2054 UL 2575 UL Standard for batteries for use in light electric rail (LER) applications and stationary applications Standard for standby batteries Heating and cooling equipment Standard for fixed and location-dedicated electric room heaters Standard for household and commercial batteries Standard for safety lithium ion battery systems for use in electric power tool and motor operated, heating and lighting appliances Standard for safety for secondary cells and batteries containing alkaline or other non-acid electrolytes - safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications EPA WaterSense EPA WaterSense commercial pre rinse spray valves ASSE 1018, 1061 and 1071 EPA WaterSense specification for flushing urinals EPA WaterSense specification for high efficiency lavatory faucet specification EPA WaterSense specifications for showerheads EPA WaterSense specification for tank type high efficiency toilet specification Hazardous Locations ANSI/IEC ANSI/ISA ANSI/ISA ANSI/ISA ( ) ANSI/ISA ( ) Degrees of protection provided by enclosures (IP code) Nonincendive electrical equipment for use in class I and II, division 2 and class III, divisions 1 and 2 hazardous (classified) locations Requirements for process sealing between electrical systems and flammable or combustible process fluids Explosive atmospheres - part 0: equipment - general requirements Explosive atmospheres - part 1: equipment protection by flameproof enclosures "d" TL-266 Page 5 of 22

6 ANSI/ISA ( ) ANSI/ISA ( ) ANSI/ISA ( ) ANSI/ISA ( ) ANSI/ISA ( ) ANSI/ISA ( ) ANSI/ISA ( ) ANSI/ISA ( ) ANSI/ISA ( ) ANSI/ISA ( ) ANSI/ISA ( ) ANSI/ISA ( ) ANSI/ISA ( ) Explosive atmospheres - part 2: equipment protection by pressurized enclosures "p" Explosive atmospheres part 5: equipment protection by powder filling q Explosive atmospheres - part 6: equipment protection by oil immersion o Explosive atmospheres - part 7: equipment protection by increased safety "e" Explosive atmospheres - part 11: equipment protection by intrinsic safety "i" Explosive atmospheres - part 15: equipment protection by type of protection "n" Explosive atmospheres part 18: equipment protection by encapsulation m Explosive atmospheres - part 25: intrinsically safe electrical systems Explosive atmospheres - part 26: equipment for use in class I, zone 0 hazardous (classified) locations Fieldbus intrinsically safe concept (FISCO) and Fieldbus non-incendive concept (FNICO) Explosive atmospheres - part 31: equipment dust ignition protection by enclosure "t" Electrical apparatus for use in zone 20, zone 21 and zone 22 hazardous (classified) locations general requirements Electrical apparatus for use in zone 20, zone 21 and zone 22 hazardous (classified) locations protection by enclosures td ANSI/ISA ( ) Electrical apparatus for use in zone 21 and zone 22 hazardous (classified) locations - protection by pressurization "pd" ANSI/ISA ( ) ANSI/ISA ( ) Electrical apparatus for use in zone 20, zone 21 and zone 22 hazardous (classified) locations protection by intrinsic safety id Electrical apparatus for use in zone 20, zone 21 and zone 22 hazardous (classified) locations protection by encapsulation md TL-266 Page 6 of 22

7 ANSI/UL 674 ANSI/UL 823 ANSI/UL 844 ANSI/UL 913 ANSI/UL 1203 ANSI/UL ANSI/UL ANSI/UL ANSI/UL ANSI/UL ANSI/UL ANSI/UL ANSI/UL CAN/CSA C22.2 NO CAN/CSA C22.2 NO CAN/CSA C22.2 NO CAN/CSA C22.2 NO Electric motors and generators for use in hazardous (classified) locations Standard for electric heaters for use in hazardous (classified) locations Standard for luminaires for use in hazardous (classified) locations Standard for intrinsically safe apparatus and associated apparatus for use in class I, II, III, division 1, hazardous (classified) locations Standard for explosion-proof and dust-ignition-proof electrical equipment for use in hazardous (classified) locations Explosive atmospheres - part 0: equipment - general requirements Standard for explosive atmospheres - part 1: equipment protection by flameproof enclosures d Standard for explosive atmospheres - part 5: equipment protection by powder filling q Standard for explosive atmospheres - part 6: equipment protection by liquid immersion 'o' Explosive atmospheres - part 7: equipment protection by increased safety 'e' Explosive atmospheres - part 11: equipment protection by intrinsic safety 'i' Explosive atmospheres - part 15: equipment protection by type of protection 'n' Standard for explosive atmospheres - part 18: equipment protection by encapsulation 'm' Explosive atmospheres - part 0: equipment - general requirements Explosive atmospheres - part 1: equipment protection by flameproof enclosures "d" Explosive atmospheres - part 2: equipment protection by pressurized enclosure "p" Explosive atmospheres - part 5: equipment protection by powder filling "q" TL-266 Page 7 of 22

8 CAN/CSA C22.2 NO CAN/CSA C22.2 NO CAN/CSA C22.2 NO CAN/CSA C22.2 NO CAN/CSA C22.2 NO CAN/CSA C22.2 NO CAN/CSA C22.2 NO Explosive atmospheres - part 6: equipment protection by oil immersion "o" Explosive atmospheres - part 7: equipment protection by increased safety "e" Explosive atmospheres - part 11: equipment protection by intrinsic safety "i" Explosive atmospheres part 15: equipment protection by type of protection "n Explosive atmospheres - part 18: equipment protection by encapsulation "m" Explosive atmospheres - part 31: equipment dust ignition protection by enclosure "t" Degrees of protection provided by enclosures (IP code) CAN/CSA C22.2 NO Electrical apparatus for use in the presence of combustible dust - part 4: type of protection "pd" CAN/CSA C22.2 NO CAN/CSA C22.2 NO Explosive atmospheres - part 30-1: electrical resistance trace heating - general and testing requirements CAN/CSA C22.2 NO CAN/CSA C22.2 NO CAN/CSA C22.2 NO CAN/CSA C22.2 NO CAN/CSA C22.2 NO CAN/CSA C22.2 NO CAN/CSA C22.2 NO IEC Requirements for electrical resistance trace heating and heating device sets Electric luminaires for use in hazardous locations Electric motors and generators for use in hazardous (classified) locations Intrinsically safe and non-incendive equipment for use in hazardous locations Attachment plugs, receptacles and similar wiring devices for use in hazardous locations: class I, groups A, B, C and D; class II, group G, in coal or coke dust, and in gaseous mines Cables and cable glands for use in hazardous locations Nonincendive electrical equipment for use in class I and ii, division 2 and class III, divisions 1 and 2 hazardous (classified) locations Explosive atmospheres - part 0: equipment - general requirements TL-266 Page 8 of 22

9 IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC Explosive atmospheres - part 1: equipment protection by flameproof enclosures "d" Explosive atmospheres - part 2: equipment protection by pressurized enclosure "p" Explosive atmospheres - part 5: equipment protection by powder filling "q" Explosive atmospheres - part 6: equipment protection by liquid immersion "o" Explosive atmospheres - part 7: equipment protection by increased safety "e" Explosive atmospheres - part 11: equipment protection by intrinsic safety "i" Explosive atmospheres - part 15: equipment protection by type of protection "n" Explosive atmospheres - part 18: equipment protection by encapsulation m Explosive atmospheres - part 25: intrinsically safe electrical systems Explosive atmospheres - part 26: equipment with equipment protection level (EPL) Ga Explosive atmospheres - part 31: equipment dust ignition protection by enclosure "t" Degrees of protection provided by enclosures (IP code) IEC Electrical apparatus for use in the presence of combustible dust - part 0: general requirements IEC Electrical apparatus for use in the presence of combustible dust - part 1: protection by enclosures "td" IEC Electrical apparatus for use in the presence of combustible dust - part 4: type of protection "pd" IEC Electrical apparatus for use in the presence of combustible dust - part 11: protection by intrinsic safety 'id' IEC Electrical apparatus for use in the presence of combustible dust - part 18: protection by encapsulation 'md' TL-266 Page 9 of 22

10 FMRC 3600 FMRC 3610 FMRC 3611 Electrical equipment for use in hazardous (classified) locations general requirements Intrinsically safe apparatus and associated apparatus for use in class I, II, & III, division 1 hazardous locations Electrical equipment for use in class I, division 2; class II, division 2; and class III, division 1 and 2 hazardous locations FMRC 3615 Explosion proof electrical equipment, general requirements FMRC 3616 Approval standard for dust-ignitionproof electrical equipment general requirements FMRC 3620 Purged and pressurized electrical equipment for hazardous (classified) locations NFPA 496 Standard for purged and pressurized enclosures for electrical equipment Heating/Cooling ANSI/ASME B16.33 ANSI/ASME B16.38 ANSI/ASME B16.40 ANSI/ASME B16.44 ANSI/CSA America PRD 1 ANSI/CSA America FC 3 ANSI/CSA LC3 ANSI/CSA NGV 1 ANSI/CSA NGV 2 Manually operated metallic gas valves for use in gas piping systems up to 125 psi (sizes NPS 1/2 - NPS 2) Large metallic valves for gas distribution manually operated, Nps 2[1/2] (dn 65) To Nps 12 (dn 300), 125 Psig (8.6 Bar) maximum Manually operated thermoplastic gas shutoffs and valves in gas distribution systems Manually operated metallic gas valves for use in above ground piping systems up to 5 psi Pressure relief devices for natural gas vehicle (NGV) fuel containers Portable fuel cell power systems Manually operated electric gas ignition systems and components Compressed natural gas vehicle (NGV) fueling connection devices Compressed natural gas vehicle fuel containers ANSI/CSA/AGA NGV 3.1/CGA 12.3 Fuel system components for natural gas powered vehicles TL-266 Page 10 of 22

11 ANSI/IAS LC2 ANSI/IAS NGV 4.1/CSA 12.5 ANSI/IAS NGV 4.2/CSA ANSI/IAS NGV 4.4/CSA ANSI/IAS NGV 4.6/CSA Agricultural heaters NGV dispensing systems Hoses for natural gas dispensing systems Breakaway devices for natural gas dispensing hoses and system Manually operated valves for natural gas dispensing systems ANSI NGV 4.8/CSA Natural gas vehicle fueling station reciprocating compressor guidelines ANSI LC 1/CSA 6.26 ANSI LC 4/CSA 6.32 ANSI LC 6 ANSI/UL 44 ANSI/UL 252 ANSI/UL 429 ANSI/UL 536 ANSI/UL 1002 ANSI/UL 1054 ANSI Z21.1 ANSI Z21.5.1/CSA 7.1 ANSI Z21.5.2/CSA 7.2 ANSI Z /CSA 4.1 ANSI Z /CSA 4.3 ANSI Z ANSI Z21.12 Fuel gas piping systems using corrugated stainless steel tubing Press-connect metallic fittings for use in fuel gas distribution systems Natural gas operated diaphragm pumps Thermoset-insulated wires and cables Standard for compressed gas regulators Standard for electrically operated valves Standard for flexible metallic hose Standard for safety electrically operated valves for use in hazardous (classified) locations Standard for special-use switches Household cooking gas appliances Gas clothes dryers, volume I, type I clothes dryers Gas clothes dryers, volume II, type 2 clothes dryers Gas water heaters, volume I, storage water heaters with input ratings of 75,000 Btu per hour or less Gas-fired water heaters, volume III, storage water heaters with input ratings above 75,000 Btu per hour, circulating and instantaneous Gas-fired room heaters, volume II, unvented room heaters Draft hoods TL-266 Page 11 of 22

12 ANSI Z21.13/CSA 4.9 ANSI Z21.15/CSA 9.1 ANSI Z21.17/CSA 2.7 ANSI Z21.18/CSA 6.3 ANSI Z21.19/CSA 1.4 Gas-fired low pressure steam and hot water boilers Manually operated gas valves for appliances, appliance connector valves and hose end valves Domestic gas conversion burners Gas appliance pressure regulators Refrigerators using gas fuel ANSI Z21.20/CSA C22.2 No. 199/UL 372 ANSI Z21.23 ANSI Z21.42 ANSI Z21.57 ANSI Z21.21/CSA 6.5 ANSI Z21.22/CSA 4.4 ANSI Z21.24/CSA 6.10 ANSI Z21.35/CSA 6.8 ANSI Z /CGA 2.91 ANSI Z /CGA 2.92 Gas appliance thermostats Gas-fired illuminating appliances Recreational vehicle cooking gas appliances Automatic valves for gas appliances Relief valves for hot water supply systems Connectors for gas appliances Pilot gas filters Gas-fired, heat activated air conditioning and heat pump appliances Gas-fired, work activated air-conditioning and heat pump appliances (internal combustion) ANSI Z /CGA 2.94 Performance testing and rating of gas-fired, air conditioning and heat pump appliances ANSI Z21.41/CSA 6.9 ANSI Z21.47/CSA 2.3 ANSI Z21.50/CSA 2.22 ANSI Z21.54/CSA 8.4 ANSI Z21.56/CSA 4.7 ANSI Z21.58/CSA 1.6 ANSI Z21.60/CSA 2.26 ANSI Z21.61 ANSI Z21.63/CSA 11.3 Quick disconnect devices for use with gas fuel appliances Gas-fired central furnaces Vented decorative gas appliances Gas hose connectors for portable outdoor gas-fired appliances Gas-fired pool heaters Outdoor cooking gas appliances Decorative gas appliances for installation in solid-fuel burning fireplaces Gas-fired toilets Portable type gas camp heaters TL-266 Page 12 of 22

13 ANSI Z21.66/CGA.6.14 ANSI Z21.69/CSA 6.16 ANSI Z21.71 ANSI Z21.72/CSA 11.2 ANSI Z21.73/CSA 11.1 ANSI Z21.74 ANSI Z21.75/CSA 6.27 ANSI Z21.76 ANSI Z21.77/CSA 6.23 ANSI Z21.78/CSA 6.20 ANSI Z21.79/CGA 6.21 ANSI Z21.80/CSA 6.22 ANSI Z21.81/CSA 6.25 ANSI Z21.83 ANSI Z21.84 ANSI Z21.86/CSA 2.32 ANSI Z21.87/CSA 4.6 ANSI Z21.88/CSA 2.33 ANSI Z21.89/CSA 1.18 ANSI Z21.90/CSA 6.24 Automatic vent damper devices for use with gas-fired appliances Connectors for moveable gas appliances Automatic intermittent pilot ignition systems for field installation Gas-fired room heaters, volume II, unvented room heaters Portable type gas camp lights Portable refrigerators for use with HD-5 propane gas Connectors for outdoor gas appliances and manufactured homes Gas-fired unvented catalytic room heaters for use with propane gas Manually operated piezo-electric spark gas ignition systems and components Combination gas controls for gas appliances Gas appliance sediment traps Line pressure regulators Cylinder connection devices Gas appliance thermostats Standard for manually lighted, natural gas, decorative gas appliances for installation in solid-fuel burning fireplaces Vented gas-fired space heating appliances Automatic gas shutoff devices for hot water supply systems Vented gas fireplace heaters Outdoor cooking specialty gas appliances Gas convenience outlets and optional enclosures ANSI Z21.91 Ventless firebox enclosures for gas-fired unvented decorative room heaters ANSI Z21.92/CSA 6.29 Manually operated electric gas ignition systems and components TL-266 Page 13 of 22

14 ANSI Z21.101/CSA 8.5 ANSI Z83.4/CSA 3.7 ANSI Z83.7/CSA 2.14 ANSI Z83.8/CSA 2.6 ANSI Z83.11/CSA 1.8 ANSI Z83.18 ANSI Z83.19/CSA 2.35 ANSI Z83.20/CSA 2.34 Gas hose connectors for portable and moveable gas appliances Non-recirculating direct gas-fired industrial air heaters Gas-fired construction heaters Gas unit heaters, gas packaged heaters, gas utility heaters, and gas-fired duct furnaces Gas food service equipment Recirculating direct gas-fired industrial air heaters Gas-fired high-intensity infrared heaters Gas-fired tubular and low-intensity infrared heaters ANSI Z83.21/CSA C22.2 No. 236/UL 921 ANSI Z83.26/CSA 2.37 Gas-fired outdoor infrared patio heaters AS 4551 Domestic gas cooking appliances (amendments 1 and 2) AS 4554 Gas laundry dryers AS 4557 Domestic outdoor gas barbecues (amendments 1 and 2) AS 4563 ASCE 25 CAN 6.19 CAN1-1.1 CAN CAN CAN1-3.1 CAN1-8.1 CAN/CGA 8.3 CGA 1.3 CGA 2.29 CGA 3.2 CGA 3.3 Commercial catering gas equipment Earthquake-actuated automatic gas shutoff devices Residential carbon monoxide alarming devices Domestic gas ranges Gas-fired brooders Gas-fired portable infra-red heaters Industrial and commercial gas-fired package boilers Elastomeric hose and hose couplings for conducting propane and natural gas Safe practices for storage and handling of nitrous oxide Domestic hot plates and laundry stoves Hand-held torches for fuel gases Industrial and commercial gas-fired package furnaces Industrial and commercial gas-designed atmosphericallyfired vertical flue boilers & hot water supply heaters TL-266 Page 14 of 22

15 CGA 3.4 Industrial and commercial gas-fired conversion burners CR CSA 1.95 CSA 1.99 US CSA 2.03 US Automatic vent devices for use outdoors on fireplace chimneys CSA 2.94 US CSA 3.8 Gas-fired equipment for drying farm crops CSA 4.01 US CSA 4.96 US CSA 4.98 US Gas-fired portable heaters for recreational and commercial use CSA 5.01 US CSA 7.89 US CSA 8.94 US CSA 8.96 US CSA 9.96 US CSA US CSA B CSA B140.4 CSA B140.7 CSA B140.8 CSA B Unit heaters for residential installation Atomizing-type oil burners Oil-fired warm air furnaces Oil-burning equipment: steam and hot-water boilers Portable industrial oil-fired heaters Portable kerosine-fired heaters CSA B Oil-burning equipment: service water heaters for domestic hot water, space heating, and swimming pools IAS 1-89 IAS 1-91 IAS 1-94 IAS 2-87 TL-266 Page 15 of 22

16 IAS 2-90 IAS 2-93 IAS 3-90 IAS 3-91 IAS 3-92 IAS 3-93 IAS 4-90 IAS 5-94 IAS 6-90 IAS 6-96 IAS SAE 100R Series SAE J343 SAE J517 UL 125 UL 132 UL 197 UL 244A UL 296 Test and test procedures for SAE 100R series hydraulic hose and hose assemblies Hydraulic hose specification Standard for flow control valves for anhydrous ammonia and LP-gas Standard for safety relief valves for anhydrous ammonia and LP-gas Standard for commercial electric cooking appliances standard for solid-state controls for appliances Standard for oil burners UL 307B Standard for gas-burning heating appliances for manufactured homes and recreational vehicles UL 353 UL 378 Standard for limit controls Standard for draft equipment UL 396 UL 427 UL 441 Standard for refrigerating units Standard for gas vents TL-266 Page 16 of 22

17 UL 462 UL 495 UL 567 UL 569 UL 726 UL 727 UL 729 UL 730 UL 731 UL 732 UL 733 Standard for heat reclaimers for gas-, oil-, or solid fuelfired appliances Standard for power-operated dispensing devices for LPgas Standard for emergency breakaway fittings, swivel connectors and pipe-connection fittings for petroleum products and LP-gas Standard for pigtails and flexible hose connectors for LPgas Standard for oil-fired boiler assemblies Standard for oil-fired central furnaces Standard for oil-fired floor furnaces Standard for oil-fired wall furnaces Standard for oil-fired unit heaters Standard for oil-fired storage tank water heaters Standard for oil-fired air heaters and direct-fired heaters UL 795 Standard for commercial-industrial gas heating equipment UL 969 UL 1075 Standard for marking and labeling systems Standard for safety gas-fired cooking appliances for recreational vehicles UL 1584 UL 2034 Standard for single and multiple station carbon monoxide alarms Plumbing ANSI/UL Standard 969 ASME A /CSA B125.1 ASME A /CSA B125.2 Standard for marking and labeling systems Plumbing supply fittings Plumbing waste fittings ASME A Performance requirements for backflow protection devices and systems in plumbing fixture fittings ASME A ASME A /CSA B Porcelain enameled formed steel plumbing fixtures Anti-siphon fill valves for water closet tanks TL-266 Page 17 of 22

18 ASME A119.1/CSA B45.2 ASME A119.2/CSA B45.1 ASME A119.3/CSA B45.4 ASSE 1001 ASSE 1002 ASSE 1003 ASSE 1005 ASSE 1010 ASSE 1011 ASSE 1012 ASSE 1013 Enameled cast iron and enameled steel plumbing fixtures Ceramic plumbing fixtures Stainless steel plumbing fixtures Performance requirements for atmospheric type vacuum breakers Anti-siphon fill valves for water closet tanks Performance requirements for water pressure reducing valves for domestic water distribution systems Performance requirements for water heater drain valves 3/4 inch size Performance requirements for water hammer arresters Performance requirements for hose connection vacuum breakers Performance requirements for backflow preventers with an intermediate atmospheric vent Performance requirements for reduced pressure principle backflow preventers and reduced pressure principle fire protection backflow preventers ASSE 1014 Performance requirements for backflow prevention devices for hand-held showers ASSE 1015 ASSE 1016 ASSE 1017 Performance requirements for double check backflow prevention assemblies and double check fire protection backflow prevention assemblies Automatic compensating valves for individual showers and tub/shower combinations Performance requirements for temperature actuated mixing valves for hot water distribution systems ASSE 1018 Performance requirements for trap seal primer valves - potable water supplied ASSE 1019 ASSE 1020 ASSE 1022 Performance requirements for vacuum breaker wall hydrants, freeze resistant, automatic draining type Performance requirements for pressure vacuum breaker assembly Backflow preventer TL-266 Page 18 of 22

19 ASSE 1024 ASSE 1025 ASSE 1035 Performance requirements for dual check backflow preventers Performance requirements for diverters for plumbing faucets with hose spray, anti-siphon type, residential applications Performance requirements for laboratory faucet backflow preventers ASSE 1037 Performance requirements for pressurized flushing devices for plumbing fixtures ASSE 1044 ASSE 1047 ASSE 1048 ASSE 1051 ASSE 1052 ASSE 1053 ASSE 1056 ASSE 1061 ASSE 1062 Performance requirements for trap seal primer - drainage types and electric design types Performance requirements for reduced pressure detector fire protection backflow prevention assemblies Performance requirements for double check detector fire protection backflow prevention assemblies Performance requirements for individual and branch type air admittance valves for sanitary drainage systems Performance requirements for hose connection backflow preventers Performance requirements for dual check backflow preventer wall hydrants - freeze resistant type Performance requirements for spill resistant vacuum breaker assemblies Performance requirements for push-fit fittings Performance requirements for temperature actuated, flow reduction (TAFR) valves for individual supply fittings ASSE 1066 Performance requirements for individual pressure balancing in-line valves for individual fixture fittings ASSE 1069 ASSE 1070 ASSE 1071 ASTM C1173 Automatic temperature control mixing valves Water temperature limiting devices Performance requirements for temperature actuated mixing valves for plumbed emergency equipment Standard specification for flexible transition couplings for underground piping systems TL-266 Page 19 of 22

20 ASTM F1807 CSA B45.0 CSA B45.1 CSA B45.2 CSA B45.3 CSA B45.4 CSA B45.5 CSA B45.6 CSA B45.7 CSA B45.8 CSA B45.9 CSA B45.10 CSA B45.11 CSA B64.0 CSA B CSA B CSA B64.2 CSA B CSA B CSA B CSA B64.3 CSA B Standard specification for metal insert fittings utilizing a copper crimp ring for SDR9 cross-linked polyethylene (PEX) tubing and SDR9 polyethylene of raised temperature (PE-RT) tubing General requirements for plumbing fixtures Ceramic plumbing fixtures Enameled cast iron and enameled steel plumbing fixtures Porcelain-enameled formed steel plumbing fixtures Stainless steel plumbing fixtures Plastic plumbing fixtures Non-recirculating toilets, vacuum toilets, and wasteholding tanks for use in recreational vehicles Self-contained, recirculating, chemically controlled toilets for use in recreational vehicles Terrazzo, concrete, and natural stone plumbing fixtures Plumbing fixtures with pumped waste and macerating toilet systems Hydromassage bathtub systems Glass plumbing fixtures General requirements and test methods for vacuum breakers and backflow preventers Atmospheric vacuum breakers (AVB) Pressure vacuum breakers (PVB) Hose connection vacuum breakers (HCVB) Hose connection vacuum breakers (HCVB) with manual drainage feature Hose connection dual check vacuum breakers (HDCVB) Hose connection vacuum breakers (HCVB) with automatic drainage feature Dual check valve backflow preventers with atmospheric port (DCAP) Dual check valve backflow preventers with atmospheric port for carbonators (DCAPC) TL-266 Page 20 of 22

21 CSA B64.4 CSA B Reduced pressure principle (RP) backflow preventers Reduced pressure principle backflow preventers for fire protection systems CSA B CSA B CSA B64.6 CSA B CSA B64.7 CSA B64.8 CSA B64.9 CSA B70 CSA B125.1 CSA B125.2 CSA B125.3 CSA B137.0 CSA B137.1 Dual check valve (DuC) backflow preventers Dual check valve backflow preventers for fire protection systems (DuCF) Laboratory faucet vacuum breakers (LFVB) Dual check valve backflow preventers with intermediate vent (DuCV) Single check valve backflow preventers for fire protection systems (SCVAF) Cast iron soil pipe, fittings, and means of joining Plumbing supply fittings Plumbing waste fittings Plumbing fittings Definitions, general requirements, and methods of testing for thermoplastic pressure piping Polyethylene (PE) pipe, tubing, and fittings for cold-water pressure services CSA B137.2 Polyvinylchloride (PVC) injection-moulded gasketed fittings for pressure applications CSA B137.3 Rigid polyvinylchloride (PVC) pipe and fittings for pressure applications CSA B137.4 CSA B Polyethylene (PE) piping systems for gas services Electrofusion-type polyethylene (PE) fittings for gas services CSA B137.5 Crosslinked polyethylene (PEX) tubing systems for pressure applications CSA B137.6 Chlorinated polyvinylchloride (CPVC) pipe, tubing, and fittings for hot and cold-water distribution systems TL-266 Page 21 of 22

22 CSA B137.8 Polybutylene (PB) piping systems for pressure applications CSA B137.9 Polyethylene/aluminum/polyethylene (PE-AL-PE) composite pressure-pipe systems CSA B Crosslinked polyethylene/aluminum/crosslinked polyethylene (PEX-AL-PEX) composite pressure-pipe systems CSA B CSA B CSA B356 CSA B602 CSA C22.2 NO PDI-WH 201 Polypropylene (PR-R) pipe and fittings for pressure applications Polyamide (PA) piping systems for gas services Water pressure reducing valves for domestic water supply systems Mechanical couplings for drain, waste, and vent pipe and sewer pipe Adhesive labels Water Hammer Arresters AHAM: Association of Home Appliance Manufacturers AHRI: The Air-condition, Heating, and Refrigeration Institute ASCE: American Society of Civil Engineers ASHRAE: American Society of Heating, Refrigerating and Air-conditioning Engineers ASSE: American Society of Safety Engineers CFR: Code of Federal Regulations CGA: Compressed Gas Association FMRC: Factory Mutual Research Corporation IEC: International Electrotechnical Commission ISA: International Society of Automation NEMA: National Electrical Manufacturers Association NFPA: National Fire Protection Association PDI: Plumbing and Drainage Institute SAE: Society of Automotive Engineers UL: Underwriters Laboratories TL-266 Page 22 of 22