CHAPTER 14 REFERENCED STANDARDS TABLE REFERENCED STANDARDS PRE-PRINT. STANDARD NumBER STANDARD TiTLE APPLiCATioN

Transcription

1 CHAPTER 14 STANDARDS Note: Referenced sections will be updated before publishing General Standards. The standards listed in Table are intended for use in the design, testing, and installation of materials, devices, appliances, and equipment regulated by this code. AHAM DW * Household Electric Dishwashers Appliances 401.1, 404.4, , AHAM FWD * Food Waste Disposers Appliances 401.1, 404.4, APSP * Public Swimming Pools Swimming Pools, USPSHTC Spas, and Hot Tubs ASCE * Earthquake-Actuated Automatic Gas Shutoff Devices Fuel Gas ASHRAE Energy Standard for Buildings Except Low-Rise Residential Miscellaneous * Buildings ASME A * Scheme for the Identification of Piping Systems Piping ASME A * ASME A (R2005) (R2010)* ASME A * ASME A (R2004)* Air Gaps in Plumbing Systems (For Plumbing Fixtures and Water-Connected Receptors) Fittings 603.1, , Table 603.1, Table Air Gap Fittings for Use with Plumbing Fixtures, Appliances, Fittings 603.1, 801.1, 806.0, and Appurtenances 807.4, Table 603.1, Table Stainless Steel Drainage Systems for Sanitary DWV, Storm, Piping, Ferrous 701.1, 701.2, 707.1, and Vacuum Applications, Above- and Below Ground (Notes Table and 7) Macerating Toilet Systems and Related Components Fixtures ASME A * Water Heater Relief Valve Drain Tubes Appliances ASME A * Water Closet Personal Hygiene Devices Fixtures ASME A (R2004) (R2010)* ASME A (R2010) ASME A M-1997 (R2008) ASME A (R2004) (R2010)* ASME A (R2007)* ASME A (R2008)* ASME A (R2007)* 2011 ASME A (R2010)* TABLE STANDARDS Plastic Fittings for Connecting Water Closets to the Sanitary Drainage System Fittings Manually Operated, Quarter-Turn Shutoff Valves for Use in Valves, Metallic ball Plumbing Systems Floor-Affixed Supports for Off-the-Floor Plumbing Fixtures Fixtures 402.3, for Public Use Framing-Affixed Supports for Off-the-Floor Water Closets Fixtures 402.6, with Concealed Tanks Floor and Trench Drains DWV Components Roof, Deck, and Balcony Drains DWV Components Enameled and Epoxy Coated Cast Iron and PVC Plastic Sanitary Fixtures 401.1, Table Floor Sinks Siphonic Roof Drains DWV Components 301.2,

2 STANDARDS ASME A Backwater Valves Valves (R2008)* ASME A (R2004)* Grease Interceptors Fixtures , , ASME A Grease Removal Devices Fixtures , (R2007)* ASME A FOG (Fats, Oils, and Greases) Disposal Systems Fixtures * ASME A /CSA B Plumbing Supply Fittings Fittings 418.0, , ASME A Plumbing Waste Fittings Fittings 404.3, 701.0, /CSA B * ASME A Performance Requirements for Backflow Protection Devices Backflow Protection , (R2008)* and Systems in Plumbing Fixtures Fittings ASME A Flexible Water Connectors Piping 604.4, 2, /CSA B * ASME A (R2004)* Deck Mounted Bath/Shower Transfer Valves with Integral Backflow Protection Valves , ASME A /CSA B * ASME A /CSA B * ASME A /CSA B * Enamelled Cast Iron and Enamelled Steel Plumbing Fixtures Fixtures 401.1, 403.1, 410.0, 411.5, 411.6, 411.7, 414.0, Ceramic Plumbing Fixtures Fixtures 401.1, 402.1, 402.2, 402.3, 410.0, 414.1, 414.2, 414.3, 414.4, Stainless Steel Plumbing Fixtures Fixtures 401.1, 403.1, 403.2, 403.3, 411.5, 414.0, ASME A * Trim for Water-Closet Bowls, Tanks, and Urinals Fixtures ASME A * Hydromassage Bathtub Appliances Fixtures 401.1, ASME A a-2008* b-2009* ASME A (R2008) * ASME A (R2011)* ASME A (R2011)* ASME A (R2010)* ASME A (R2011)* ASME A * Suction Fittings for Use in Swimming Pools, Wading Pools, Swimming Pools, Spas, and Hot Tubs Spas, and Hot Tubs Dual Flush Devices for Water Closets Fixtures Wall Mounted, Pedestal Mounted, Adjustable, Elevating, Tilting, and Pivoting Lavatory, Sink, and Shampoo Bowl Carrier Systems and Drainage Waste Systems Fixtures 401.1, Six-Liter Water Closets Equipped with a Dual Flushing Fixtures 401.1, Device Bathtubs/Whirlpool Bathtubs with Pressure Sealed Doors Fixtures Vitreous China Nonwater Urinals Fixtures 401.1, Qualification of Installers of Firestop Systems and Devices for Piping Systems Certification ASME A M-1985 (R2007)* ASME A M-1991 (R2008)* ASME B (R2006)* Hydrants for Utility and Maintenance Use (Note 1) Valves Cleanouts (Note 1) DWV Components 707.0, Pipe Threads, General Purpose, Inch Joints , (A) 224

3 STANDARDS Dryseal Pipe Threads, Inch Joints ASME B (R2008)* ASME B * Gray Iron Pipe Flanges and Flanged Fittings: Classes 25, 125, and 250 Fittings, 604.5, , (5), ASME B * Malleable Iron Threaded Fittings: Classes 150 and 300 Fittings 311.8,, 604.6, 701.2, , , (2), Table, Table ASME B * Gray Iron Threaded Fittings: (Classes 125 and 250) (Includes Revision Services) ASME B * Pipe Flanges and Flanged Fittings: NPS 1/2 through NPS 24 Metric/Inch Fittings 311.8,, 604.5, (2), Table Fittings ASME B * Cast Iron Threaded Drainage Fittings (Note 1) Fittings 311.8, 701.2, Table ASME B * Cast Copper Alloy Threaded Fittings: Classes 125 and 250 Fittings 311.8, ,, Table ASME B (R2005)* Cast Copper Alloy Solder Joint Pressure Fittings (Note 1) Fittings ,, Table ASME B * Metallic Gaskets For Pipe Flanges: Ring-Joint, Spiral- Joints Wound, and Jacketed ASME B * Nonmetallic Flat Gaskets for Pipe Flanges Joints ASME B (R2005) (R2010)* ASME B (R2006)* ASME B * Wrought Copper and Copper Alloy Solder Joint Pressure Fittings Fittings ,, , Table Cast Copper Alloy Solder Joint Drainage Fittings: DWV Fittings , 701.2, , Table Cast Copper Alloy Pipe Flanges and Flanged Fittings: Fittings, , Classes 150, 300, 600, 900, 1500 and ASME B * Cast Copper Alloy Fittings for Flared Copper Tubes Fittings ,, , Table ASME B * Wrought Copper and Wrought Copper Alloy Solder- Joint Drainage Fittings DWV (Note 1) Fittings , 701.2, , Table ASME B Manually Operated Metallic Gas Valves for use in Gas Piping Valves , (R2007)* Systems up to 125 psi (Sizes NPS 1/2 - NPS 2) ASME B * Valves-Flanged, Threaded, and Welding End Valves 301.0, ASME B * Malleable Iron Threaded Pipe Unions: Classes 150, 250 and 300 (Includes Revision Services) ASME B * Manually Operated Thermoplastic Gas Shutoffs and Valves in Gas Distribution Systems ASME B * Large Diameter Steel Flanges: NPS 26 through NPS 60 Metric/Inch ASME B Wrought Copper and Copper Alloy Braze-Joint Pressure (R2008)* Fittings Fittings 301.0, , Valves , Fittings 301.0, (5) Fittings 301.0, ASME B31.1b * Power Piping Piping 301.0, Appendix F ASME B * Process Piping Piping Appendix F ASME B36.10M-2004 (R2010)* ASME B36.19M-2004 (R2010)* Welded and Seamless Wrought Steel Pipe Piping, Ferrous Stainless Steel Pipe Piping, Ferrous 301.0, 301.2, Table 225

4 STANDARDS ASME BPVC Section IV * Rules for Construction of Heating Boilers Miscellaneous 301.0, 301.2, Table ASME BPVC Section Rules for Construction of Pressure Vessels Division 1 Miscellaneous (2), VIII * ASME BPVC Section IX- Welding and Brazing Qualifications Certification , * ASSE * Atmospheric Type Vacuum Breakers Backflow Protection 603.1, , , , , , , , Table ASSE * Anti-Siphon Fill Valves (Ballcocks) for Gravity Water Closet Flush Tanks Backflow Protection 410.1, 603.1, , Table ASSE * Water Pressure Reducing Valves for Domestic Water Distribution Valves 608.2, Systems ASSE * Backflow Prevention Requirements for Commercial Dishwashing Machines Backflow Protection , , ASSE * Home Laundry Equipment Appliances , ASSE * Plumbing Aspects of Residential Food Waste Disposer Units Appliances , , ASSE * Water Hammer Arresters Water Supply Component , ASSE * Hose Connection Vacuum Breakers Backflow Protection 603.1, ASSE * Backflow Preventers with an Intermediate Atmospheric Vent Backflow Protection ASSE * Reduced Pressure Principle Backflow Preventers and Reduced Pressure Principle Fire Protection Backflow Preventers Backflow Protection 603.1, , , , , , , , , , , Table ASSE * Backflow Prevention Devices for Hand-Held Showers Backflow Protection ASSE * Double Check Backflow Prevention Assemblies and Double Check Fire Protection Backflow Prevention Assemblies Backflow Protection 603.1, , , Table Valves ASSE * Automatic Compensating Valves for Individual Showers and Tub/Shower Combinations ASSE * Temperature Actuated Mixing Valves for Hot Water Distribution Valves Systems ASSE * Trap Seal Primer Valves-Potable Water Supplied Valves ASSE * Vacuum Breaker Wall Hydrants, Freeze Resistant, Automatic Backflow Protection , Table Draining Type ASSE * Pressure Vacuum Breaker Assembly Backflow Protection , , , , , , Table ASSE Drains Air Gaps for Domestic Dishwasher Applications Backflow Protection ASSE * Backflow Preventer for Beverage Dispensing Equipment Backflow Protection , Table ASSE Hot Water Dispensers Household Storage Type-Electrical Appliances

5 STANDARDS ASSE * Dual Check Backflow Preventers Backflow Protection ASSE Dual Check Valve Type Backflow Preventers for Carbonated Backflow Protection 603.1, Beverage Dispensers, Post Mix Types ASSE * Laboratory Faucet Backflow Preventers Backflow Protection ASSE Pressurized Flushing Devices (Flushometers) for Plumbing Backflow Protection 410.1, Fixtures ASSE * Trap Seal Primer Devices-Drainage Types and Electronic DWV Components Design Types ASSE * Reduced Pressure Detector Fire Protection Backflow Prevention Assemblies Backflow Protection , , , , , Table ASSE * Double Check Detector Fire Protection Backflow Prevention Assemblies Backflow Protection , Table ASSE * Hose Connection Backflow Preventers Backflow Protection ASSE Dual Check Backflow Preventer Wall Hydrants Freeze Resistant Type Backflow Protection , 603.1, , 608.5, Table ASSE * Chemical Dispensing Systems Backflow Protection ASSE * Spill Resistant Vacuum Breaker Backflow Protection , , , , Table ASSE Freeze Resistant Sanitary Yard Hydrant with Backflow Protection Backflow Protection , , Table ASSE * Outdoor Enclosures for Fluid Conveying Components Miscellaneous ASSE * Push-Fit Fittings Fittings ASSE * Temperature Actuated Flow Reduction (TAFR) Valves for Valves Individual Fixture Fittings ASSE Individual Pressure Balancing In-Line Valves for Individual Valves Fixture Fittings (Note 6) ASSE * Automatic Temperature Control Mixing Valves Valves ASSE * Water Temperature Limiting Devices Valves 413.1, 414.5, ASSE Temperature Actuated Mixing Valves for Plumbed Emergency Valves Equipment ASSE Barrier Type Floor Drain Trap Seal Protection Devices DWV Components , ASSE Dielectric Pipe Unions Joints 301.0, (3) ASSE Series * Cross-Connection Control Professional Qualifications Certification 603.1, ASSE Series * Professional Qualifications Standard for Medical Gas Certification , Systems Personnel ASTM A (R2009) Ferritic Malleable Iron Castings Piping, Ferrous ASTM A (R2008) Gray Iron Castings Piping, Ferrous ASTM A 53/A 53M Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded, and Seamless Piping, Ferrous, (2), Table, Table

6 STANDARDS ASTM A Cast Iron Soil Pipe and Fittings (Notes 1 and 7) Piping, Ferrous 701.1, 701.2, 807.3, 903.1, , , ,, , Table ASTM A 106/A 106M- Seamless Carbon Steel Pipe for High-Temperature Service Piping, Ferrous ASTM A Gray Iron Castings for Valves, Flanges, and Pipe Fittings Piping, Ferrous (R2009) ASTM A Cupola Malleable Iron Piping, Ferrous (R2006) ASTM A (R2007) Copper-Brazed Steel Tubing Piping, Ferrous , Appendix E ASTM A ASTM A Seamless and Welded Austenitic Stainless Steel Tubing for General Service Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes Piping, Ferrous 301.0, 1, Appendix F, Table Piping, Ferrous, Table ASTM A Ductile-Iron Pressure Pipe Piping, Ferrous (R2008) e1 ASTM A 479/A 479M- Stainless Steel Bars and Shapes for Use in Boilers and Other Piping, Ferrous a Pressure Vessels ASTM A Corrosion-Resistant High-Silicon Iron Castings Piping, Ferrous 301.0, Appendix F (R2008) ASTM A Ductile Iron Castings Piping, Ferrous 301.0, Appendix F (R2009) ASTM A 653/A 653M- 2009a 2010 Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy- Coated (Galvannealed) by the Hot-Dip Process Piping, Ferrous 313.8, , , ASTM A (R2009) e1* ASTM A (R2008) ASTM A Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples Piping, Ferrous High-Silicon Iron Pipe and Fittings (Note 1) Piping, Ferrous Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications (Note 7) Piping, Ferrous 701.1, 701.2, 807.3, 903.1, , , , , Table Piping, Plastic 407.0, ASTM A Flexible Poly (Vinyl Chloride) (PVC) Gaskets used in Connection of Water Closets to Sanitary Drainage ASTM A Cast Iron Couplings used for Joining Hubless Cast Iron Soil Piping, Ferrous 316.3, Pipe and Fittings ASTM B (R2009) Refined Lead Joints 313.8, , 401.2, 411.8, 701.3, , 906.6, ASTM B Solder Metal (Note 2) Joints , , ASTM B e Seamless Copper Pipe, Standard Sizes Piping, Copper Alloy, , , Table ASTM B Seamless Red Brass Pipe, Standard Sizes Piping, Copper Alloy, 701.1, , Table, Table ASTM B (R2010) Seamless Copper Tube (Note 7) Piping, Copper Alloy, 701.1, , , , Table, Table

7 STANDARDS ASTM B Seamless Copper Water Tube Piping, Copper Alloy, , , , , , , Appendix E, Table ASTM B a 2010 Seamless Brass Tube Piping, Copper Alloy 301.2,, Table ASTM B Copper Sheet, Strip, Plate, and Rolled Bar Miscellaneous ASTM B Copper, Bus Bar, Rod, and Shapes and General Purpose Miscellaneous Rod, Bar, and Shapes ASTM B Aluminum and Aluminum-Alloy Drawn Seamless Tubes Piping, Ferrous ASTM B 241/B 241M ASTM B e Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube General Requirements for Wrought Seamless Copper and Copper-Alloy Tube (Note 7) Piping, Ferrous , Piping, Copper Alloy, 701.1, , , Table, Table Piping, Copper Alloy , , , Appendix E ASTM B Seamless Copper Tube for Air Conditioning and Refrigeration Field Service ASTM B Threadless Copper Pipe, Standard Sizes (Note 7) Piping, Copper Alloy, 701.1, Table, Table ASTM B Copper Drainage Tube (DWV) (Note 7) Piping, Copper Alloy 701.1, , Table ASTM B Copper Sheet and Strip for Building Construction Miscellaneous ASTM B Welded Copper Tube Piping, Copper Alloy 301.0,, Table ASTM B a Copper Alloy Sand Castings for General Applications (Note 3) Piping, Copper Alloy , , ASTM B Welded Brass Tube Piping, Copper Alloy ASTM B Brass, Copper, and Chromium-Plated Pipe Nipples Piping, Copper Alloy (R2005) e1 ASTM B Liquid and Paste Fluxes for Soldering of Copper and Copper Joints (R2009) 2010 Alloy Tube ASTM B Seamless Copper Tube for Medical Gas Systems Piping, Copper Alloy , (R2006) ASTM B Making Capillary Joints by Soldering of Copper and Copper Joints , (R2010) Alloy Tube and Fittings ASTM C (R2009) Clay Drain Tile and Perforated Clay Drain Tile Piping, Non-Metallic Table ASTM C ASTM C (R2004) e1 (R2009) Nonreinforced Concrete Sewer, Storm Drain, and Culvert Piping, Non-Metallic 701.1, , Table Pipe (Note 7) Asbestos-Cement Pressure Pipe Piping, Non-Metallic, Table ASTM C a Concrete Drain Tile Piping, Non-Metallic , ASTM C (R2009) ASTM C Asbestos-Cement Nonpressure Sewer Pipe (Notes 4 and, 5 (R2006) and 7) ASTM C a e Joints for Concrete Pipe and Manholes, Using Rubber Gaskets Compression Joints for Vitrified Clay Pipe and Fittings Joints Piping, Non-Metallic 701.1, , 715.0, , Table Joints ,

8 STANDARDS ASTM C (R2009) Perforated Concrete Pipe Piping, Non-Metallic Table ASTM C Precast Reinforced Concrete Manhole Sections Miscellaneous ASTM C Asbestos-Cement Underdrain Pipe Piping, Non-Metallic Table (R2009) e1 ASTM C a Rubber Gaskets for Cast Iron Soil Pipe and Fittings Joints , ASTM C Vitrified Clay Pipe, Extra Strength, Standard Strength, and Perforated (Note 7) Piping, Non-Metallic 701.1, 701.2, , Table ASTM C (R2008) Installing Asbestos-Cement Nonpressure Pipe Piping, Non-Metallic Table ASTM C Borosilicate Glass Pipe and Fittings for Drain, Waste, and Piping, Non-Metallic (R2005) (R2010) Vent (DWV) Applications (Note 1) ASTM C Flexible Transition Couplings for Underground Piping Joints , Systems ASTM C Precast Concrete Septic Tanks DWV Components Appendix KH 5.0 ASTM C a ASTM C ASTM C ASTM C ASTM C a ASTM D (R2005)* ASTM D Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings Joints , Thermoplastic Elastomeric (TPE) Gasket Materials for Drain, Joints , , Waste, and Vent (DWV), Sewer, Sanitary and Storm Plumbing Systems Shielded Transition Couplings for Use With Dissimilar DWV Joints , Pipe and Fittings Above Ground Mechanical Couplings Using Thermoplastic Elastomeric Joints , , (TPE) Gaskets for Joining Drain, Waste, and Vent (DWV), , , Sewer, Sanitary, and Storm Plumbing Systems for Above and Below Ground Use Heavy Duty Shielded Couplings Joining Hubless Cast Iron Joints , Soil Pipe and Fittings Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe, Schedules 40 and 80 (Note 7) Rigid Poly (Vinyl Chloride) (PVC) Compounds and Chlorinated Poly (Vinyl Chloride) (CPVC) Compounds ASTM D * Poly (Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120 ASTM D (R2005) e1 (R2010) Piping, Plastic 701.1, , , Table Piping, Plastic Piping, Plastic, 701.1, 903.1, , , , Table 312.1, Table, Table Rubber Rings for Asbestos-Cement Pipe Joints ASTM D * Polyethylene (PE) Plastic Pipe, Schedule 40 (Discontinued) Piping, Plastic ASTM D (R2011)* ASTM D * ASTM D * Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings Polyethylene (PE) Plastic Pipe, (SDR-PR) Based on Controlled Inside Diameter Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series) ASTM D * Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications (Note 7) ASTM D * Polyethylene (PE) Plastic Pipe, Schedules 40 and 80, Based on Outside Diameter (Discontinued) ASTM D * Threaded Poly (Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80 (Note 1) Joints Piping, Plastic, Table Piping, Plastic, Table Piping, Plastic Piping, Plastic Fittings, Table 230

9 STANDARDS ASTM D * Poly (Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40 (Note 1) Fittings, Table ASTM D * Poly (Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule Fittings, Table 80 (Note 1) ASTM D a 2011* Thermoplastic Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings (Note 1) Piping, Plastic , , , (B), (B), Appendix E ASTM D * Reinforced Epoxy Resin Gas Pressure Pipe and Fittings Piping, Plastic 301.0, Appendix E Solvent Cements for Poly (Vinyl Chloride) (PVC) Plastic ASTM D Joints e1 (R2009) * Piping Systems ASTM D Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe Fittings, Table (R2008)* (Note 1) ASTM D * Heat Fusion Joining of Polyolefin Pipe and Fittings (Note 1) Joints ASTM D * ASTM D * Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings (Notes 1 and 7) Poly (Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings (Note 7) Piping, Plastic 701.1, 701.2, 707.1, 903.1, , , Table Piping, Plastic 701.1, 701.2, 707.1, 903.1, , , Table ASTM D a Joints for IPS PVC Pipe Using Solvent Cement Joints (R2009)* ASTM D (R2009)* Acrylonitrile-Butadiene-Styrene (ABS) and Poly (Vinyl Chloride) (PVC) Composite Sewer Piping (Note 7) Piping, Plastic 701.1, , Table ASTM D * Socket-Type Polyethylene Fittings for Outside Diameter- Fittings, Table Controlled Polyethylene Pipe and Tubing ASTM D * Poly (Vinyl Chloride) (PVC) Sewer Pipe and Fittings (Notes 1 and 7) Piping, Plastic , ASTM D * Polyethylene (PE) Plastic Tubing Piping, Plastic, Table ASTM D * Acrylonitrile-Butadiene-Styrene (ABS) Sewer Pipe and Fittings (Notes 1 and 7) Piping, Plastic , ASTM D * Underground Installation of Thermoplastic Pressure Piping Piping, Plastic ASTM D b* Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Hot- and Piping, Plastic, Table Cold-Water Distribution Systems ASTM D Making Solvent-Cemented Joints with Poly(Vinyl Chloride) Joints (R200210)* (PVC) Pipe and Fittings ASTM D Filament-Wound Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Piping, Plastic (R2007) e1 * Pipe ASTM D * Type PSM Poly (Vinyl Chloride) (PVC) Sewer Pipe and Piping, Plastic Fittings (Note 7) ASTM D * Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter Piping, Plastic, , Table ASTM D Solvent Cements for Styrene-Rubber (SR) Plastic Pipe and Joints (R2009)* Fittings ASTM D (R2011)* Solvent Cements for Transition Joints Between Acrylonitrile- Butadiene-Styrene (ABS) and Poly (Vinyl Chloride) (PVC) Non-Pressure Piping Components Joints ASTM D (R200511)* Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals Joints

10 STANDARDS ASTM D * Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Joints Seals ASTM D a* Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing Fittings, Table ASTM D a* Drain, Waste, and Vent (DWV) Plastic Fittings Patterns (Note Fittings ) ASTM D * Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Piping, Plastic 701.1, 701.2, Pipe and Fittings ASTM D * Chlorinated Polyethylene (CPE) Sheeting for Concealed Water-Containment Membrane Miscellaneous ASTM D a Polypropylene Injection and Extrusion Materials Miscellaneous ASTM D (R2008) e1 * ASTM D (R2003) Poly(Vinyl Chloride) (PVC) Plastic Flexible Concealed Water-Containment Membrane Miscellaneous Determining the Performance of Oil/Water Separators Miscellaneous , Subjected to Surface Run-Off ASTM E c2010b* Surface Burning Characteristics of Building Materials Miscellaneous , , ASTM E c 2010b* Fire Tests of Building Construction and Materials Miscellaneous , ASTM E * Fire Tests of Penetration Firestop Systems Miscellaneous 313.7, , , , , , ASTM F * Safe Handling of Solvent Cements, Primers, and Cleaners Joints Used for Joining Thermoplastic Pipe and Fittings ASTM F * Corrugated Polyethylene (PE) Pipe and Fittings Piping, Plastic ASTM F (R2008)* ASTM F * ASTM F * ASTM F * ASTM F * ASTM F * ASTM F (R2009) ASTM F b e1 * ASTM F * ASTM F * ASTM F * Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings (Note 1) Piping, Plastic Threaded Chlorinated Poly (Vinyl Chloride)(CPVC) Plastic Fittings, Table Pipe Fittings, Schedule 80 Socket-Type Chlorinated Poly (Vinyl Chloride) (CPVC) Fittings, Table Plastic Pipe Fittings, Schedule 40 Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Table Fittings, Schedule 80 Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe, Piping, Plastic, Table Schedules 40 and 80 Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Piping, Plastic, Table (SDR-PR) Grab Bars and Accessories Installed in the Bathing Area Miscellaneous Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), Schedule 40 and Schedule 80 Solvent Cements for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe and Fittings Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe with a Cellular Core (Notes 1 and 7) Primers for Use in Solvent Cement Joints of Poly (Vinyl Chloride) (PVC) Plastic Pipe and Fittings Piping, Plastic Joints Piping, Plastic 701.1, 701.2, 903.1, , Table Joints ASTM F * Large Diameter Corrugated Polyethylene Pipe and Fittings Piping, Plastic

11 STANDARDS ASTM F * Polyethylene (PE) Plastic Pipe (SDR-PR) Based on Outside Piping, Plastic Diameter ASTM F (R2009)* ASTM F * Poly (Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter (Note 7) Smoothwall Polyethylene (PE) Pipe for Use in Drainage and Waste Disposal Absorption Fields Piping, Plastic 701.1, 701.2, 715.0, , Table Piping, Plastic ASTM F * Crosslinked Polyethylene (PEX) Tubing Piping, Plastic, 1, Table ASTM F * Crosslinked Polyethylene (PEX) Plastic Hot- and Cold-Water Distribution Systems Piping, Plastic, 1, Table ASTM F * Coextruded Poly (Vinyl Chloride) (PVC) Plastic Pipe with a Cellular Core (Note 7) Piping, Plastic 701.1, 903.1, , Table ASTM F * Polyethylene (PE) Large Diameter Profile Wall Sewer and Piping, Plastic Drain Pipe (Note 7) ASTM F * Poly (Vinyl Chloride) (PVC) Corrugated Sewer Pipe with a Piping, Plastic Smooth Interior and Fittings (Note 7) ASTM F (R2006)* Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene Pipe and Tubing Fittings 301.2,, Table ASTM F * Rehabilitation of Existing Pipelines and Conduits by the Piping, Plastic Inversion and Curing of a Resin-Impregnated Tube ASTM F * Crosslinked Polyethylene/Aluminum/ Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe Piping, Plastic, 3, Table ASTM F * Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe Piping, Plastic, 3, Table ASTM F * Pressure-Rated Composite Pipe and Fittings for Elevated Piping, Plastic Temperature Service ASTM F * Poly (Vinyl Chloride) (PVC) Gasketed Sewer Fittings Fittings ASTM F * Polyolefin Pipe and Fittings for Corrosive Waste Drainage Piping, Plastic Systems ASTM F * Performance of Gasketed Mechanical Couplings for Use in Joints Piping Applications ASTM F e1 * Coextruded Composite Pipe (Note 7) Piping, Plastic 701.1, Table ASTM F (R2008)* ASTM F (R2009)2010* ASTM F * ASTM F (R2005) ASTM F e1 * ASTM F * ASTM F (R2011)* ASTM F (R2011)* ASTM F * Coextruded Composite Drain, Waste, and Vent Pipe (DWV) Piping, Plastic Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems Piping, Plastic Rehabilitation of Existing Pipelines and Conduits by Pulledin-Place Piping, Plastic Installation of Cured-in-Place Thermosetting Resin Pipe (CIPP) Coextruded Poly (Vinyl Chloride) (PVC) Non-Pressure Piping, Plastic 701.1, 903.1, , Plastic Pipe Having Reprocessed-Recycled Content , Table Metal Insert Fittings Utilizing a Copper Crimp Ring for Joints Fittings, 1.1, Table SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage Fittings 701.1, 701.2, 903.1, and DWV Fabricated Fittings , Table Plastic Mechanical Fittings for Use on Outside Diameter Fittings Controlled Polyethylene Gas Distribution Pipe and Tubing Metallic Mechanical Fittings for Use on Outside Diameter Fittings Controlled Thermoplastic Gas Distribution Pipe and Tubing Cold Expansion Fittings with PEX Reinforcing Rings for Use Fittings, 1.1, Table with Cross-linked Polyethylene (PEX) Tubing 233

12 STANDARDS ASTM F a 2009* ASTM F * ASTM F * ASTM F * Metal Mechanical Cold Flare Compression Fittings with Disc Spring for Crosslinked Polyethylene (PEX) Tubing Special Engineered Fittings, Appurtenances or Valves for Use in Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems Factory Assembled Anodeless Risers and Tran sition Fittings in Polyethylene (PE) and Polyamide 11 (PA11) and Polyamide 12 (PA12) Fuel Gas Distribution Systems Metal Insert Fittings for Polyethylene/ Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-Water Systems Fittings, 1.1, Table Piping, Plastic, Table Fuel Gas Joints Fittings , (B), 3.1, Table ASTM F (R2006)* Fittings 301.0, ASTM F * Cold-Expansion Fittings With Metal Compression-Sleeves Fittings, 1.1, Table for Crosslinked Polyethylene (PEX) Pipe ASTM F * Stainless Steel Clamps for Securing SDR9 Cross-linked Joints 1.1 Polyethylene (PEX) Tubing to Metal Insert and Plastic Insert Fittings ASTM F * Plastic Insert Fittings Utilizing a Copper Crimp Ring for Joints, 1.1, Table SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing ASTM F Flexible Pre-Insulated Piping Piping, Plastic (R2008)* ASTM F * Fabricated Fittings of Butt-Fused Polyethylene (PE) Plastic DWV Components Table Pipe, Fittings, Sheet Stock, Plate Stock, or Block Stock ASTM F * Crosslinked Polyethylene/Aluminum/ Crosslinked Polyethylene Piping, Plastic, 3, Table Tubing OD Controlled SDR9 ASTM F Specification for 12 to 60 in. [300 to 1500 mm] Annular Piping, Plastic , , Table Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings , Table for Gravity-Flow Storm Sewer and Subsurface Drainage Applications ASTM F e Pressure-Rated Polypropylene (PP) Piping Systems Piping, plastic 5, Table ASTM F * ASTM F * ASTM F a Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Cross-linked Polyethylene/Aluminum/Cross-linked Polyethylene (PEX-AL-PEX) Tubing Field-Assembled Anodeless Riser Kits for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing Plastic Insert Fittings for SDR9 Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing Polyethylene of Raised Temperature (PE-RT) Plastic Hot and Cold Water Tubing and Distribution Systems Joints Fittings Fuel Gas Fittings ASTM F Piping and Fittings, Plastic AWS A * Filler Metals for Brazing and Braze Welding Joints AWS A * Bare Stainless Steel Welding Electrodes and Rods Joints , 3.1, Table , (B), 1.1, Table, 5, Table AWS B * Brazing Procedure and Performance Qualification Certification , AWS B * Welding Procedure and Performance Qualification for Thermoplastics Joints, Certification , (B) AWWA C * Ductile-Iron and Gray-Iron Fittings Fittings, Table 234

13 STANDARDS AWWA C * Rubber-Gasket Joints for Ductile-Iron Pressure Pipe and Joints Fittings (same as ANSI A 21.11) AWWA C * Ductile-Iron Pipe, Centrifugally Cast Piping, Ferrous, Table AWWA C * Ductile-Iron Compact Fittings for Water Service Fittings, Table AWWA C * Coal-Tar Protective Coatings and Linings for Steel Water Miscellaneous Pipelines - Enamel and Tape Hot Applied AWWA C * Liquid-Epoxy Coating Systems for the Interior and Exterior Miscellaneous of Steel Water Pipelines AWWA C * Fusion-Bonded Epoxy Coating for the Interior and Exterior Miscellaneous of Steel Water Pipelines AWWA C * Extruded Polyolefin Coatings for the Exterior of Steel Water Miscellaneous Pipelines AWWA C * Asbestos-Cement Pressure Pipe, 4 in. through 16 in. (100 Piping, Non-Metallic, Table mm through 400 mm) for Water Distribution Systems (Discontinued) AWWA C * Metal-Seated Gate Valves for Water Supply Service Valves AWWA C * Rubber Seated Butterfly Valves, 3 in. (75 mm) through 72 in. (1800 mm) Valves AWWA C * Ball Valves, 6 in. through 48 in. (150 mm through 1200 mm) Valves AWWA C * Double Check Valve Backflow Prevention Assembly Backflow Protection 603.1, , , , Table AWWA C * Reduced-Pressure Principle Backflow Prevention Assembly Backflow Protection 603.1, , , , , , , , , , , Table AWWA C * Grooved and Shouldered Joints Joints AWWA C * Polyvinyl Chloride (PVC) Pressure Pipe and Fabricated Piping, Plastic, Table Fittings, 4 in. through 12 in. (100 mm through 300 mm), for Water Transmission and Distribution AWWA C * Polyethylene (PE) Pressure Pipe and Tubing, 1/2 in. (13 mm) Piping, Plastic, Table through 3 in. (76 mm), for Water Service AWWA C * Cross-Linked Polyethylene (PEX) Pressure Pipes, 1/2 in. (12 Piping, Plastic 301.0, 1 mm) through 3 in. (76 mm), for Water Service AWWA C * Injection-Molded Polyvinyl Chloride (PVC) Pressure Fittings Fittings, 4 in. through 12 in. (100 mm through 300 mm), for Water Distribution CGA C (R2008) Standard Color Marking of Compressed Gas Containers for Miscellaneous Medical Use CGA G Cleaning Equipment for Oxygen Service Miscellaneous , , CGA S Pressure Relief Device Standards-Part 3-Stationary Storage Fuel Gas Containers for Compressed Gases CGA V Compressed Gas Cylinder Valve Outlet and Inlet Connections Valves Chapter 13 CISPI Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications (Notes 1 and 7) Piping, Ferrous 701.1, 701.2, , Table

14 STANDARDS CISPI Couplings for Use in Connection with Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications Joints , , CSA A Concrete Pipe and Manhole Sections Piping 301.0, CSA B (R2008) General Requirements for Plumbing Fixtures Fixtures 401.1, 402.1, 402.2, 402.3, 411.5, 411.6, 411.7, 411.8, CSA B (R2008) Plastic Plumbing Fixtures Fixtures 401.1, 401.2, 402.2, 402.3, 414.0, CSA B (R2008) Macerating Systems and Related Components DWV Components CSA B (R2006) Hydromassage Bathtubs Fixtures 401.1, CSA B Glass Lavatories Fixtures CSA B Backflow Preventers and Vacuum Breakers Backflow Protection 603.1, 603.2, Table CSA B Atmospheric Vacuum Breakers (AVB) Backflow Protection 603.1, , Table CSA B Pressure Vacuum Breakers (PVB) Backflow Protection 603.1, , Table CSA B Hose Connection Vacuum Breakers (HCVB) Backflow Protection 603.1, , Table CSA B Hose Connection Dual Check Vacuum Breakers (HCDVB) Backflow Protection 603.1, , Table CSA B Reduced Pressure Principle (RP) Backflow Preventers Backflow Protection 603.1, , , , , , , , , , Table CSA B Reduced Pressure Principle Backflow Preventers for Fire Protection Systems (RPF) Backflow Protection 603.1, , , , , , , , , , Table CSA B Double Check Valve (DVCA) Backflow Preventers Backflow Protection 603.1, , , , Table CSA B Double Check Valve Backflow Preventers for Fire Protection Systems (DVCAF) Backflow Protection 603.1, , , , Table CSA B Laboratory Faucet Vacuum Breakers (LFVB) Backflow Protection 603.1, CSA B Design, Material, and Manufacturing Requirements for DWV Components 714.3, 721.0, 722.2, Prefabricated Septic Tanks and Sewage Holding Tanks Appendix K CSA B Commercial and Residential Drains and Cleanouts DWV Components 401.1, 411.0, CSA B Plumbing Fittings Fittings 402.4, 407.7, 410.0, 413.1, 414.5, 416.3, Table CSA B /B Design and Installation of Non-Potable Water Systems/Maintenance and Field Testing of Non-Potable Water Systems (Note 1) Miscellaneous 301.0, ,

15 STANDARDS CSA B Polyethylene (PE) Pipe, Tubing, and Fittings for Cold-Water Piping, Plastic, Table Pressure Services CSA B CSA B CSA B Crosslinked Polyethylene (PEX) Tubing Systems for Pressure Applications Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure-Pipe Systems Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Composite Pressure-Pipe Systems Piping, Plastic, 1, 1.1, 1.2, Table Piping, Plastic, 3, 3.1, 3.2, Table Piping, Plastic, 3, 3.1, 3.2, Table Piping, Plastic 5, Table CSA B Polypropylene (PP-R) Pipe and Fittings for Pressure Applications CSA B Polyolefin and Polyvinylidene Fluoride (PVDF) Laboratory Piping, Plastic Drainage Systems CSA B Groove- and Shoulder-Type Mechanical Pipe Couplings Fittings CSA B (R2005) Water Pressure Reducing Valves for Domestic Water Supply Valves 608.2, Systems CSA B Grease Interceptors DWV Components , , Table CSA G Corrugated Steel Pipe Products Piping, Ferrous CSA LC1a Fuel Gas Piping Systems Using Corrugated Stainless Steel Fuel Gas Tubing (CSST) (same as CSA 6.26a) CSA LC (R2005)* Appliance Stands and Drain Pans Miscellaneous CSA LC Press-Connect Copper and Copper Alloy Fittings for Use in Fuel Gas Fuel Gas Distribution Systems (same as CSA 6.32) CSA Z a-2009* Gas Water Heaters Volume I, Storage Water Heaters with Fuel Gas, Appliances Input Ratings of Btu Per Hour or Less (same as CSA 4.1a) CSA Z b-2008 Gas Water Heaters Volume III, Storage Water Heaters with Fuel Gas, Appliances (R2010)* Input Ratings Above Btu Per Hour, Circulating and Instantaneous (same as CSA 4.3b) CSA Z21.12b-1994 Draft Hoods Fuel Gas, Appliances (R2000) (R2010)* CSA Z21.13b-2007 a- Gas-Fired Low Pressure Steam and Hot Water Boilers (same Fuel Gas, Appliances * as CSA 4.9ba) CSA Z * Manually Operated Gas Valves for Appliances, Appliance Fuel Gas , Connector Valves, and Hose End Valves (same as CSA 9.1) CSA Z21.22b-2001 (R2008)* Relief Valves for Hot Water Supply Systems (same as CSA 4.4b) Valves 608.4, 608.5, 608.6, CSA Z21.24a-2009* Connectors for Gas Appliances (same as CSA 6.10a) Fuel Gas , CSA Z a-1997 Gas-Fired, Heat Activated Air Conditioning and Heat Pump Fuel Gas, Appliances (R200207)* Appliances (same as CSA 2.91a) CSA Z21.41a-2005 b- Quick-Disconnect Devices for Use with Gas Fuel Appliances Fuel Gas * (same as CSA 6.9ab) CSA Z21.47b-2008* Gas-Fired Central Furnaces (same as CSA 2.3b) Fuel Gas, Appliances 501.0, Table , UMC CSA Z21.54b-2009* Gas Hose Connectors for Portable Outdoor Gas-Fired Appliances (same as CSA 8.4b) Fuel Gas

16 STANDARDS CSA Z21.56a-2008* Gas-Fired Pool Heaters (same as CSA 4.7a) Fuel Gas, Swimming Pools, Spas, and Hot Tubs USPSHTC CSA Z * Connectors for Movable Gas Appliances (same as CSA 6.16) Fuel Gas , CSA Z21.80a-2005 (R2008) b-2010* CSA Z21.81a-2007 (R2010)* CSA Z * Line Pressure Regulators (same as CSA 6.22ab) Fuel Gas , , (A,1) Cylinder Connection Devices (same as CSA 6.25a) Fuel Gas Vented Gas-Fired Space Heating Appliances (same as CSA 2.32) Fuel Gas, Appliances 501.0, (6), (4), Table , UMC CSA Z83.11b-2009* Gas Food Service Equipment (same as CSA 1.8b) Fuel Gas, Appliances 501.0, Table CSA Z * Special Requirements for Plumbing Installations in Health Miscellaneous Care Facilities IAPMO IGC Tub/Shower Enclosures and Shower Panel Assemblies Fixtures 401.1, IAPMO IGC a Ball Valves Valves 301.0, 605.1, IAPMO IGC Glass Lavatories, Sinks and Counter Tops Fixtures IAPMO IGC Safety Plates, and Plate Straps, Notched Plates and Safety Miscellaneous 301.0, Collars IAPMO IGC a Copper Alloy or Aluminum Alloy Sinks and Lavatories Fixtures IAPMO IGC Metallic Bathtubs, Shower Pans and Whirlpool Bathtubs Fixtures 401.1, IAPMO IGC a Drinking Water Fountains With or Without Chiller or Heater Fixtures IAPMO PS a Dishwasher Drain Airgaps Backflow Protection 603.1, , 807.4, Table IAPMO PS Metallic Fittings for Joining Polyethylene Pipe for Water Joints Service and Yard Piping IAPMO PS d Flexible PVC Hose for Pools, Hot Tubs, Spas and Jetted Swimming Pools, 414.3, USPSHTC 2010c Bathtub Spas, and Hot Tubs IAPMO PS Polyethylene Encasement Sleeve for Potable Water Pipe and Piping Tubing IAPMO PS Lead Free Sealing Compounds for Threaded Joints Joints , IAPMO PS Black Plastic PVC or PE Pressure-Sensitive Corrosion Miscellaneous 313.5, , Preventive Tape IAPMO PS Pipe Alignment & Secondary Support Systems Miscellaneous 314.2, IAPMO PS Cushioned Bathtubs and Whirlpool Bathtub Appliances Fixtures 401.1, IAPMO PS c Field-Fabricated Tiling Kits Miscellaneous 411.5, Table IAPMO PS Flush Valves with Dual Flush Device For Water Closets or Fixtures 410.1, Water Closet Tank with an Integral Flush Valves with a Dual Flush Device IAPMO PS Plastic and Metallic Expansion Joints Joints , , IAPMO PS Pump/Dose, Sumps and Sewage Ejector Tanks with or DWV Components 710.8, without a Pump IAPMO PS Grooved Mechanical Pipe Couplings and Grooved End Fittings Joints

17 STANDARDS IAPMO PS Metallic and Plastic Utility Boxes Miscellaneous IAPMO PS Bathwaste Strainer Drains Fixtures IAPMO PS PVC Hydraulically Actuated Diaphragm Type Water Control Valves Valves IAPMO PS Septic Effluent and Waste Water Diverter Valves or Diversion DWV Components System IAPMO PS Sewage Holding Tank Containing Sewage Ejector Pump for DWV Components Direct Mounted Water Closet IAPMO PS Plastic Leaching Chambers DWV Components IAPMO PS a Pipe Flashings Miscellaneous 313.8, IAPMO PS Airgap Units for Water Conditioning Equipment Installation Backflow Protection 603.1, IAPMO PS Dielectric Waterway Fittings Fittings IAPMO PS Early-Closure Replacement Flappers or Early-Closure Fixtures Replacement Flapper with Mechanical Assemblies IAPMO PS Bathwaste and Overflow Assemblies with Tub Filler Spout DWV Components IAPMO PS Valves with Atmospheric Vacuum Breakers Valves IAPMO PS Dental Vacuum Pumps Miscellaneous IAPMO PS Ballcock or Flushometer Valve Tailpiece Trap Primers and DWV Components Trap Primer Receptors/Adapters IAPMO PS Multiport Electronic Trap Primer DWV Components IAPMO PS Clarifiers DWV Components IAPMO PS Precast Concrete Seepage Pit Liners and Covers DWV Components IAPMO PS Fiberglass (Glass Fiber Reinforced Thermosetting Resin) Fittings Fittings IAPMO PS Tools for Mechanically Formed Tee Connections in Copper Miscellaneous Tubing IAPMO PS Rainwater Diverter Valve for Non-Roofed Area Slabs DWV Components 301.0, IAPMO PS Diverter and Shutoff Valves for Pool/Spas Valves, Swimming USPSHTC Pools, Spas, and Hot Tubs IAPMO PS Pre-Pressurized Potable Water or Expansion Tanks Miscellaneous 301.0, 608.6, 608.7, IAPMO PS Soaking and Hydrotherapy (Whirlpool) Bathtubs with Fixtures Hydraulic Seatlift IAPMO PS Elastomeric Test Caps/Cleanout Caps DWV Components IAPMO PS a Plastic Stabilizers for Use with Plastic Closet Bends DWV Components IAPMO PS a 2010 Heat Exchangers and Indirect Water Heaters Miscellaneous , , Appendix L 3.0 IAPMO PS P-Trap, Supply Stop and Riser Insulated Protector Miscellaneous IAPMO PS Drain, Waste, and Vent Hangers and Plastic Pipe Support Hooks DWV Components

18 STANDARDS IAPMO PS Passive Direct Solar Water Heaters Appliances USEC IAPMO PS Prefabricated Fiberglass Church Baptisteries Fixtures IAPMO PS Terrazzo, Marble, Concrete, Granite, and Slate Plumbing Fixtures Fixtures IAPMO PS Porous Filter Protector for Sub-drain Weep Holes DWV Components IAPMO PS Suction Relief Valves Valves IAPMO PS Pressure Relief Connection for Dispensing Equipment Valves IAPMO PS Polyethylene Distribution Boxes DWV Components Appendix K IAPMO PS Pre-fabricated, Tileable Shower Receptors Fixtures 411.5, 411.6, IAPMO PS Aramid Reinforced Rubber Hose for Use in Non-Potable Miscellaneous UMC Water Radiant Heating and Snowmelting IAPMO PS Grease Restaurant Fire Suppression Systems Miscellaneous IAPMO PS a PVC Cold Water Compression Fittings Fittings IAPMO PS PVC Cold Water Gripper Fittings Fittings IAPMO PS PVC Plastic Valves for Cold Water Distribution Systems Outside a Building and CPVC Plastic Valves for Hot and Cold Water Distribution Systems Valves IAPMO PS Hydraulically Powered Household Food Waste Disposers Appliances 301.0, 404.4, , IAPMO PS e1 Remote Floor Box Industrial Water Supply, Air Supply, Miscellaneous Drainage IAPMO PS Hot Water On-Demand or Automatic Activated Hot Water Miscellaneous Pumping Systems IAPMO PS Hot Water Circulating Devices Which Do Not Use a Pump Miscellaneous IAPMO PS Copper and Copper Alloy Tubing System Incorporating Fittings Press-Type or Nail-Type Connections IAPMO PS Water Energized Sump Pump Miscellaneous IAPMO Z * Plastic Bathtub & and Shower Units Fixtures 401.1, IAPMO Z * Plastic Lavatories Fixtures IAPMO Z * Plastic Water Closet Bowls and Tanks Fixtures IAPMO Z * Plastic Toilet (Water Closet) Seats Fixtures IAPMO Z * Plastic Sinks Fixtures IAPMO Z * Prefabricated Plastic Spa Shells Fixtures, Swimming Pools, Spas, and Hot 401.1, 414.0, USPSHTC Tubs IAPMO Z * Plastic Bathtub Liners Fixtures 401.1, IAPMO Z * Plastic Urinal Fixtures (Note 1) Fixtures IAPMO Z * Prefabricated Septic Tanks DWV Components Appendix K 240