Elite 64 Version 64 Zone Controller Arrowhead Alarm Products Ltd. Operating Guide. Proudly Designed and Manufactured in New Zealand
|
|
- Nickolas Cory Booth
- 5 years ago
- Views:
Transcription
1 2 Elite 64 Version 64 Zone Controller Arrowhead Alarm Products Ltd Operating Guide Proudly Designed and Manufactured in New Zealand 1
2 CONTENTS Page No. INTRODUCTION 3 About your Alarm 3 OPERATING YOUR ALARM 4 General Information 4 Arming the Alarm 4 Disarming the Alarm 4 Arming in Stay Mode 5 Disarming Stay Mode 5 Bypassing Zones 6 Manual Panic, Medical & Fire Alarms 7 Resetting Alarms 7 PROGRAMMING YOUR ALARM 8 Getting into Program Mode 8 Exiting Program Mode 8 Adding or Deleting User Codes 8 Changing Telephone Numbers 9 Programming the Time & Date 10 SPECIAL CONTROL BUTTON FUNCTIONS 10 Directly Controlling Outputs from the Keypad 10 Disable Chime Mode Alarms 11 REMOTE COMMAND CONTROL OPERATION 12 How Remote Command Control works 12 Local Command Control of outputs 14 USER FUNCTIONS 15 Quickview Mode 15 Starting Walk-test Mode 15 Answer an In-coming Call 16 MEMORY DISPLAY MODE 17 Viewing Memory Mode 17 Current System Alarms 17 OWNERS DETAILS 18 2
3 INTRODUCTION ABOUT YOUR ALARM Thank you for choosing to protect your premises with the Elite 64. In doing so you have invested in the most advanced and adaptable panel on the market. 4 Separate Alarm Panels: Your Elite 64 can operate as four totally independent alarms. These independent AREAS can be controlled from one global keypad or from multiple keypads assigned to specific areas. The Elite 64 has many incredible program options and additional accessories that can enhance the standard features of the panel offering simple Home Automation to Radio control and Voice Prompted Command Control. Please check with your installer to find out more about these powerful features. The Elite 64 can communicate with monitoring stations or call you on your mobile phone to warn of intruders. You can phone your home to check or change the status of any output using the keys on your phone provided the optional Voice or DTMF board is fitted. Arm or disarm the whole house or just one area, all with your own voice confirming your selections. Imagine turning on the spa before leaving work so it is hot when you get in the door. The under-floor heating has just automatically switched on using the on board timer and you have just opened the rollerdoor and disarmed the garage from your cell phone so the white ware repairman can work on your washer. The controller supports the LCD (liquid Crystal Display) keypad. It also has a comprehensive alarm event memory that stores all of the controller activity with the time and date. The event memory is accessible from the keypad with the time & date information also able to be displayed via the LCD keypad. 3
4 GENERAL INFORMATION OPERATING YOUR ALARM Your ELITE64 Alarm Controller has been designed with you the user in mind. Clearly named backlit keys mean you don't have to remember complicated key combinations to achieve a result. As with everything about the ELITE64 even key functions can be fine tuned to your specific needs. Please ask your installer. ARMING THE ALARM Arming the alarm will turn on all detectors in the Area or Areas being Armed. To Arm the alarm press; <ARM> Armed LED or Area A,B,C or D armed LED s will turn ON or, <CODE><ENTER> Armed LED or Area A,B,C or D armed LED s will turn ON or, <ARM><CODE><ENTER> Armed LED or Area A,B,C or D armed LED s will turn ON. The panel has three different keypad Arming modes as detailed above. The installer can advise you on how your alarm has been configured. NOTE: The AAP LCD keypad has a separate LED for each area but the Crow LCD keypad has one overall ARMED LED that turns on when any area is armed. On both keypads the LCD display will also show which areas are armed. DISARMING THE ALARM Disarming the alarm will turn off all detectors in the Area or Areas that were Armed. To Disarm the alarm press; <CODE><ENTER> Armed LED or Area A,B,C or D armed LED s will turn OFF. There is also a special feature that can be set by your installer to allow the pressing of the <ARM> button during the Exit Delay time to Disarm the alarm. This feature is to allow a quick disarm if you have forgotten to do something prior to Arming the alarm. The feature is disabled when the alarm is fully armed following expiry of the exit delay time. 4
5 ARMING IN STAY MODE Stay mode allows you to Arm a pre-selected part of the building. Stay mode can be used in a residential application to arm parts of the house that you will not need to go into at night time or in a commercial application to allow monitoring of an unattended shop front. The Stay mode alarm can be in the form of a full alarm or possibly a small buzzer (Chime) to warn of activity in the stay mode coverage area. To arm Stay mode press; <STAY> Stay LED On or Area A,B,C or D armed LED s will FLASH or <STAY><CODE><ENTER> Stay LED On or Area A,B,C or D armed LED s will FLASH. The panel has two different Stay arming modes and the methods of Arming are detailed above. The installer will advise you on how they have configured your particular alarm. NOTE: The AAP LCD keypad has a separate LED for each area but the Crow LCD keypad has one overall STAY LED that turns on when any area is armed. On both keypads the LCD display will also show which areas are armed in Stay Mode. Once Stay mode has been Armed, the normal exit delay will apply and if a zone is triggered the normal entry delays will also apply. If, however you press the <ENTER> button following Arming of Stay mode, this will cancel the exit delay so the system is armed immediately and also cancel ALL entry delay times so all zones will become Instant alarm zones. This allows you to select whether you wish the Stay Mode to Arm with or without delays every time you arm this mode. DISARMING STAY MODE Disarming Stay Mode will turn off all Stay Mode detectors in the Area or Areas that were Armed. To Disarm Stay Mode press; <STAY> Stay LED Off or Area A,B,C or D armed LED s will turn OFF or <CODE><ENTER> Stay LED Off or Area A,B,C or D armed LED s will turn OFF. The single button disarm of stay mode indicated above is a programmable option so you will need to check with your installer how your system has been configured. 5
6 BYPASSING ZONES This key allows you to temporarily bypass zones of your choice prior to arming your panel. The bypassed zones will go back to normal the next time you disarm the panel unless it is a 24 hour zone. A Bypassed 24 hour zone must be manually unbypassed. To bypass a zone (say Zone 1), follow the instructions below. To bypass zone 1, key in the following sequence: <BYPASS> The word Bypass will show on the LCD display. <01> The display will show 01. <ENTER> Bypass LED will now turn ON. While in the Bypass mode it is possible to Bypass more than one zone. The example below details how this is done. To bypass zones 1,9 & 16, key in the following sequence: <BYPASS> The word Bypass will show on the LCD display <01,09,16> The display will show <ENTER> Bypass LED will now turn ON. NOTE: Zones and keypads can be assigned to one or all of the four possible Areas available in the ELITE64. If the keypad you are using for bypassing is not assigned to the same areas as the zone you are trying to Bypass the panel will not allow you to bypass that zone. As you bypass zones the display shows the numbers as entered e.g. in the example above as you enter in the digits 01, the display will show 01, then if you enter 09, the display will show 01 & 09 on the display and finally as you enter 16 the display will show all three numbers on the screen. The LCD keypad will show up to 5 two digit numbers then if you need to bypass more zones it will alternate the display with the first 5 selections then the next 5, switching between displays at about a 2 second rate. 6
7 MANUAL PANIC, MEDICAL & FIRE ALARMS There are three special Manual Alarms that may be triggered from the keypads. These are a PANIC, FIRE, and MEDICAL alarm. The Panic alarm can be generated by either the single Panic button or by the simultaneous operation of two buttons. The Fire and Medical alarms are generated by pressing two buttons simultaneously. The special button combinations and the alarms they generate are shown in the table below; KEYPAD TYPE AAP LCD KEYPAD PANIC ALARM FIRE ALARM MEDICAL ALARM <PANIC> <1> & <3> <4> & <6> <7> & <9> CROW LCD KEYPAD <CHIME> & <CONTROL> <A> & <B> <B> & <CHIME> RESETTING ALARMS In case of an alarm condition, pressing your <CODE> then <ENTER> will reset the alarm and turn off any audible sirens. If your code does not reset the alarm it means that the alarm occurred in an Area either not assigned to the keypad you are using or your code is not allowed to reset alarms in that area. NOTE: If at any stage you make an error when entering a code all you need to do is press the <ENTER> button to reset the keypad and start again. 7
8 PROGRAMMING YOUR ALARM GETTING INTO PROGRAM MODE There are 2 levels of program mode, CLIENT mode and INSTALLER mode. Normally the installer will give you access to the CLIENT mode so you can add, delete, or change the user codes. At your request, the installer can provide you with access to the INSTALLER mode as well. In CLIENT mode you can program up to 100 individual User Codes that may be from 1-6 digits in length. Each of the 100 Users can be assigned NO access, LIMITED access or FULL access to CLIENT mode. A User with FULL access can change all access codes, change the panel time & date, change the telephone numbers, answer an in-coming call for remote PC access, print the event buffer to a serial printer and initiate Walk-test mode. All of these things can be explained in detail by your installer. To get into CLIENT mode (provided the system is NOT armed) press; <PROGRAM> <CODE> <ENTER> Program LED with turn ON If you get a single long beep at this point and the Program LED doesn t turn on, it means your code cannot access Program mode. EXITING PROGRAM MODE To exit program mode press; <PROGRAM> <ENTER> Program LED will turn Off ADDING OR DELETING A USER CODE Once in CLIENT mode, to program a User code you enter the User code address (a value from 1-100) then the new code. For example to program User # 3 with a code 2580, key in the following sequence: <PROGRAM> <3> <ENTER> <2580> <ENTER> (After entering P3E, if there is an existing code at that address it will be shown on the keypad LCD display. Entering a new code will replace any existing code and the new code will be shown on the LCD display). The panel will give 3 short beeps to indicate correct entry or 1 long tone if not accepted. 8
9 To remove or clear a user code, e.g user code 3, key in the following sequence <PROGRAM> 3 <ENTER> <CONTROL> <0> <ENTER> Address 1 = User # 1, 2 = User# 2 to 100 = User# 100. (Note: You must press and hold down the Control button first followed within 2 seconds by the 0 button) CHANGING TELEPHONE NUMBERS Your panel will accept up to 6 phone numbers with a total of 16 digits. Your panel can be can be programmed to dial all or any of these depending on the event which has occurred. (The six phone numbers are at program addresses 831 through to 836) While in CLIENT mode, key in the following sequence: <PROGRAM> <831> <ENTER> (the address for telephone number 1) The existing number will be displayed at the keypad then enter; <NEW TELEPHONE #> <ENTER> The new number will be displayed at the keypad. At any time you can enter in the address for the telephone number just to view the currently programmed value then press the <PROGRAM> button to move on to another address. Address 831 = PH # 1, 832 = PH# 2 to 836 = PH# 6. To delete a telephone number, e.g phone number 3, key in the following sequence <PROGRAM> 833 <ENTER> <CONTROL> <0> <ENTER> (Note: You must press and hold down the Control button first followed within 2 seconds by the 0 button) 9
10 PROGRAMMING THE TIME & DATE The alarm system has an internal clock that may be used to automatically Arm or Disarm the alarm, turn Outputs On or Off or inhibit the operation of User codes. It is also used to identify when events occurred in memory via the LCD keypad. Should you need to change the Time & Date it can be done from CLIENT mode. To change the Time & Date press; <PROGRAM> <818> <ENTER> <1-7> <ENTER> Where 1-7 = the current day (1=Sun, 2 = Mon to 7 = Sat) <PROGRAM> <819> <ENTER> <HHMM> <ENTER> Where HH = Hour in 24 Hour Format and MM = Minutes <PROGRAM> <820> <ENTER> <1-31> <ENTER> Where 1-31 = the current date <PROGRAM> <821> <ENTER> <1-12> <ENTER> Where 1-12 = the current month <PROGRAM> <822> <ENTER> <YY> <ENTER> Where YY = current year, e.g. 05=2005 SPECIAL CONTROL BUTTON FUNCTIONS The <CONTROL> button on the keypad has a number of uses depending on the options set by your installer. It can be used to disable Chime-zone alarms or directly control any of the outputs from the keypad. The operation of the various <CONTROL> button functions (if enabled by the installer) are detailed below; DIRECTLY CONTROLLING an OUTPUT To directly control outputs from the LCD keypad press; <CONTROL> (Note: The Control Button must be held down for 2 seconds) 10
11 The LCD display will show OUTPUTS Now by pressing any of the buttons from 1-8 the appropriate output number will be displayed at the keypad indicating that it has been turned on (your installer has to allow the outputs to be directly controlled otherwise you cannot turn them On or Off at this point). Pressing the same number again will turn the output number off indicating the output is now off. When finished, press the <ENTER> button to exit the direct output control mode. DISABLE CHIME MODE ALARMS Any detector on your Elite can be programmed to trigger a buzzer or chime at your keypad/s when movement is detected. The zones are called Chime Zones and must be programmed into the system by your installer. Your installer can also give you the ability to disable the Chime Zone monitoring via the keypad when it is not required. To Disable the Chime Zone Monitoring at an AAP LCD keypad press; <CONTROL> followed by <PROGRAM> The LCD display will show Chime Off. The Display will timeout after 20 seconds back to the normal display or you can press the <ENTER> button to go back to the normal display. To re-enable the Chime Zone monitoring press; <CONTROL> followed by <PROGRAM> The LCD display will show Chime On To Disable the Chime Zone Monitoring at a Crow LCD keypad press; <CHIME> (Hold button down for 2 seconds) The LCD display will show Chime Off. The Display will timeout after 20 seconds back to the normal display or you can press the <ENTER> button to go back to the normal display. 11
12 To re-enable the Chime Zone Monitoring press; <CHIME> (Hold button down for 2 seconds) The LCD display will show Chime On The Display will timeout after 20 seconds back to the normal display or you can press the <ENTER> button to go back to the normal display. REMOTE COMMAND CONTROL OPERATION HOW REMOTE COMMAND CONTROL WORKS Another powerful feature available from your alarm is Command Control. This feature is a remote control facility which allows valid users to access the panel via a standard touch tone telephone and check or change the Arm/Disarm status of each of the areas, operate each of the eight outputs or turn on an optional Microphone. The Command Control feature is only available on panels fitted with a Voice or DTMF board. The Voice board provides voice prompts to guide you through Command control operations whereas the DTMF board provides tones (one Long Tone for ON or three short beeps for OFF). Please talk to your installer to find out if all or any of these options are available on your alarm. To perform any of the Command Control features you must first ring the phone number which the panel is connected to. The panel may be set up to answer after a specific number of rings of it may be set-up to use a fax defeat option. Either way, when you ring the phone number and the panel answers the call, the first thing you will hear over the phone is a burst of modem tone for two seconds. After this tone has stopped you must enter the access code which is associated with the Command menu option you wish to access. Remember, the code you enter will determine which menu option you access. If you miss the pause, the panel will repeat the modem tone and then again pause for 5 seconds looking for your access code. This process will be repeated a total of 4 times before hanging up if no valid code is received. When entering codes or other information in Command Control the "#" key acts as a "Clear" button. When you have entered the required 4 digit access code the panel will reply with the status message associated with the Command Control function you have accessed. For example, if the Area A Arm/Disarm DTMF code was Once the code 2045 has been received the panel 12
13 checks the current status of Area A and replies with the pre-programmed voice message relating to that status e.g. if Area A is Armed then the Armed message will be sent, if Disarmed then the Disarmed message will be sent. If only the DTMF board is fitted, the voice message is substituted with a long beep if Area A is Armed, and three short beeps if it is disarmed. Once the status message has informed you of the actual state, you can use the "*" key to toggle Area A from Arm-Disarm or Disarm-Arm, e.g. in our example above, code 2045 accesses Area "A" arming or disarming. Assuming the status message we received was "Area A alarm is Armed" If we press the "*" key, Area "A" will be Disarmed and we would receive a status message "Area A alarm is Disarmed" (or whatever message is programmed by the installer) While you are on-line with the panel you can move between menu options by entering the code of the option you want to control. Assuming there was a code of 4321 programmed to control outputs. After having used code 2045 to control the Arm/Disarm status of Area A we first press the # button to reset all previous entries. Then we can enter the digits (that is 4321 as the code to control outputs and 5 to select output #5). The current status of output #5 will be given either by the voice message or the appropriate tone and then the status can be changed with the * button on the remote telephone (Note; For output control you must enter in the 4 digit code e.g followed by the output number you wish to control, in this case 5). At any stage, if you enter in an incorrect code you can press the # button on the remote telephone to clear all code entries and then start again. To turn on the optional Microphone (only available if the Voice Board is fitted) you must enter in the appropriate code followed by the * button. To turn the Microphone off you simply press the * button again. To end a Command Control session simply hang up the phone. The panel is monitoring the line at all times and 15 seconds after the last key press it will automatically hang up the line. This 15 second timer is active during the whole command control process so a period of 15 seconds without a key press will cause the panel to hang-up, unless the microphone is on whereby the timeout becomes 60 seconds before automatic hang-up. 13
14 LOCAL COMMAND CONTROL OF OUTPUTS If a command control code for outputs is programmed and the output/s are allowed to be locally controlled from the keypad, then entering the 4 digit code at a keypad will blank the display and the OUTPUTS screen will now indicate the output status; e.g. if output 1 is on, the display will have 1 showing. By now pressing the 1 button at the panel keypad, output 1 can be turned off provided it is allowed to be locally controlled. To leave local command control mode simply press the <ENTER> button and the keypad will return to normal operation. This feature works the same way that Directly Controlling an Output works (see page 10) only it requires a code to access the function. 14
15 USER FUNCTIONS QUICKVIEW MODE When the panel is disarmed and zones are unsealed the LCD display will show all unsealed zones by displaying them sequentially at about 1.5 second intervals. If there are a number of zones unsealed at any one time it can take a while to cycle through each zone until they are all displayed. The Quickview mode allows up to 5 zones to be displayed numerically at a time, eg if zones 1,11,25,36 & 58 are all unsealed the Quickview display will show; If more than 5 zones are unsealed the display will cycle to the next 5 unsealed zones after 2 seconds until all zones have been displayed. To access Quickview mode simply press the <ENTER> button when there are unsealed zones. Pressing the <ENTER> button again will revert back to the normal display mode or the keypad will automatically revert back to normal display after 30 seconds if the <ENTER> button is not pressed within this time. STARTING WALKTEST MODE While in CLIENT mode a User with the proper authority can start walk-test mode. This special mode latches the alarm signals from detectors at the keypad initiating the test so that one person can trigger every detector connected to the alarm then return to the keypad to verify operation. On terminating Walk-test mode the panel automatically returns to normal mode (exits client program mode) and the test results are put into the memory buffer so they can be viewed at a later time. To start Walk-test mode while in CLIENT mode press; <PROGRAM> <1096> <ENTER> The keypad buzzer will beep at 1 second intervals Next trigger every detector connected to the panel then return to the keypad and all of the zones that were triggered will be displayed at the keypad. To terminate Walk-test mode press; <ENTER> The keypad will stop beeping and automatically exit CLIENT mode. 15
16 ANSWER AN IN-COMING CALL From time to time your installer may need to access the alarm from a remote PC to make changes to your programming and for security reasons they may have configured the alarm so that an authorised person on-site is required to make the alarm system answer the in-coming call. This option is only available in CLIENT mode. To answer an In-coming Call press; <PROGRAM> <1095> <ENTER> Provided the line connected to the alarm is ringing when the above code is entered the panel will now answer the call and allow a remote PC connection. 16
17 VIEW MEMORY MODE MEMORY DISPLAY MODE The alarm panel has an event memory which stores the most recent events, (up to 255), including all alarm events, all system events such as mains failure, etc as well as arming by Area. This event memory is displayed via the keypad with the most recent event shown first and subsequent events following in descending order from newest to oldest. The LCD display will show "New Event(s)" when there is a new alarm event in memory which has not been viewed. To view the new event(s) simply press the <MEMORY> button and the events will be displayed with the most recent event shown first. Each press of the <MEMORY> button will advance the display to the next event. Note: To stop the memory display function press ENTER or if no buttons are pressed for approximately 40 seconds the keypad will automatically exit memory display mode. The New Event(s) display will be removed once the event(s) have been viewed. CURRENT SYSTEM ALARMS When viewing the memory event buffer at the keypad by pressing the <MEMORY> button, the first thing that will always be displayed are any Current System Alarms. There are 8 system alarms as shown in the chart below. A Current System alarm is one that is still present and needs to be restored to normal. Following the display of current system alarms the panel will then sequence through the 255 historical memory events starting at the most recent event. CURRENT SYSTEM ALARMS LED #1 Battery Low LED #5 Radio Pendant Battery Low LED #2 Mains or 12V Fuse Failure LED #6 Supervised Detector Failure LED #3 Telephone Line Failure LED #7 Zone Inactivity Timeout LED #4 Radio Detector Battery Low LED #8 Dialler Kiss-off Failure 17
18 OWNERS DETAILS NAME: ADDRESS: TELEPHONE NUMBER: INSTALLERS NAME: INSTALLERS CONTACT PH #: ACCESS CODES: Code 1 Code 2 Code 3 Code 4 Code 5 Code 6 Code 7 Code 8 Code 9 Code 10 Code 11 Code 12 Code 13 Code 14 Code 15 PANEL TELEPHONE NUMBERS: PH # 1 PH # 2 PH # 3 PH # 4 PH # 5 PH # 6 ZONE DESCRIPTIONS: Zone # 1 Zone # 2 Zone # 3 Zone # 4 Zone # 5 Zone # 6 Zone # 7 Zone # 8 Zone # 9 Zone # 10 Zone # 11 Zone # 12 Zone # 13 Zone # 14 Zone # 15 Zone # 16 Zone # 17 Zone # 18 Zone # 19 Zone # 20 Zone # 21 Zone # 22 18
19 Zone # 23 Zone # 24 Zone # 25 Zone # 26 Zone # 27 Zone # 28 Zone # 29 Zone # 30 Zone # 31 Zone # 32 Zone # 33 Zone # 34 Zone # 35 Zone # 36 Zone # 37 Zone # 38 Zone # 39 Zone # 40 Zone # 41 Zone # 42 Zone # 43 Zone # 44 Zone # 45 Zone # 46 Zone # 47 Zone # 48 Zone # 49 Zone # 50 Zone # 51 Zone # 52 Zone # 53 Zone # 54 Zone # 55 Zone # 56 Zone # 57 Zone # 58 Zone # 59 Zone # 60 Zone # 61 Zone # 62 Zone # 63 Zone # 64 19
20 Installer Notes: Please contact your alarm installer if you require further information. 20
Elite 16D Version 16 Zone Controller Arrowhead Alarm Products Ltd. Operating Guide. Proudly Designed and Manufactured in New Zealand
6 Elite 16D Version 16 Zone Controller Arrowhead Alarm Products Ltd Operating Guide 1 Proudly Designed and Manufactured in New Zealand CONTENTS Page No. INTRODUCTION 3 About your Alarm 3 OPERATING YOUR
More informationElite S Version 8-16 Zone Controller Arrowhead Alarm Products Ltd. Operating Guide. Proudly Designed and Manufactured in New Zealand
9 Elite S Version 8-16 Zone Controller Arrowhead Alarm Products Ltd Operating Guide Proudly Designed and Manufactured in New Zealand 1 CONTENTS Page No. INTRODUCTION About your Alarm 3 3 OPERATING YOUR
More informationPowerWave-16. Users Operating and Programming Guide Version P/N Rev. B N.A July 2002
ELECTRONIC ENGINEERING LTD. PowerWave-16 16 zone Control panel Communicator Users Operating and Programming Guide Version 6.20 P/N 7121240 Rev. B N.A July 2002 Contents Introduction...4 Meet the Crow Alarm
More informationElite 16D Version 16 Zone Controller Arrowhead Alarm Products Ltd. Operating Guide. Proudly Designed and Manufactured in New Zealand
5 Elite 16D Version 16 Zone Controller Arrowhead Alarm Products Ltd Operating Guide Proudly Designed and Manufactured in New Zealand About your Alarm Controller Thank you for choosing to protect your premises
More informationPower Wave LCD Keypads. Users Operating and Programming Guide Version 2.00
Power Wave LCD Keypads CR-16S CR-16M Users Operating and Programming Guide Version 2.00 P/N 7102265 Rev. C N.A May 2003 Contents Introduction...4 Meet the PowerWave Alarm Control System... 4 Typical Alarm
More informationVoice Board. Installation and Programming Guide. Runner 4/8,PowerWave 4/8/16 &, Elite64. Add-on Board For Storing Recorded Voice Messages
ELECTRONIC ENGINEERING LTD. Voice Board Runner 4/8,PowerWave 4/8/16 &, Elite64 Add-on Board For Storing Recorded Voice Messages And listen-in. Installation and Programming Guide. P/N 7101372 Rev. C V.K
More informationControl Panel. Operators Manual TO SUIT AS216 KEYPAD. AS216-OM-6.2. Advanced Digital Controls
Control Panel Operators Manual TO SUIT AS216 KEYPAD AS216-OM-6.2 Ultra-16 Control Panel AS216 OPERATORS MANUAL Copyright 2002 by NZ Ltd Auckland, New Zealand Document Part Number: This document is provided
More informationContents. Glossary
Contents Glossary ------------------------------------------------------------------------------------------------------ 6 1. Introduction to the IDS 1632 -------------------------------------------------------------
More informationUltra-8D. ControlPanel. Operators Manual. Advanced DigitalControls CP108-0M-V1
Ultra-8D ControlPanel Operators Manual Advanced DigitalControls CP108-0M-V1 ULTRA-8D CONTROL PANEL AS108 OPERATORS MANUAL Copyright 2001 by Advanced Digital Controls NZ Ltd Auckland, New Zealand Document
More informationIDS S E C U R I T Y IDS816. User Manual MANUAL NO B ISSUED DEC 2004 VERSION 2.00
INHEP DIGITAL IDS S E C U R I T Y IDS816 User Manual MANUAL NO. 700-283-01 B ISSUED DEC 2004 VERSION 2.00 Contents 1. Introduction to the IDS816... 4 2. Understanding the Keypad Indicators... 4 3. Programmable
More informationL900 series USER MANUAL
INTRODUCTION The BLUGUARD Control Panel is designed for simple operation yet provides the maximum protection for you. Please read this manual carefully and follow the instructions contained in this book.
More informationProudly Designed and Manufactured in New Zealand. By Arrowhead Alarm Products Ltd
Proudly Designed and Manufactured in New Zealand By Arrowhead Alarm Products Ltd ARMED = Indicates the System is Armed in Away Mode. STAY = Indicates the System is Armed in Stay Mode. BYPASS = When Flashing,
More informationIDS S E C U R I T Y IDS816. User Manual MANUAL NO C ISSUED APRIL 2005 VERSION 2.00
INHEP DIGITAL IDS S E C U R I T Y IDS816 User Manual MANUAL NO. 700-283-01C ISSUED APRIL 2005 VERSION 2.00 Contents 1. Introduction to the IDS816... 4 2. Understanding the Keypad Indicators... 4 3. Programmable
More informationIDS816 User Manual H Issued January 2009
1 Contents Glossary-------------------------------------------------------------------------------------------------------------------6 1. Introduction to the IDS 816---------------------------------------------------------------------------7
More informationWatchguard WGAP864 User Manual
Watchguard WGAP864 User Manual v1.0 Issued September 2016 1 2 Table of Contents Glossary... 5 1. Introduction to your Watchguard WGAP864... 6 2. Before Operating your Alarm System... 6 3. Understanding
More informationAlarm Control Panel WIC-16Z4P WIC-5Z2P. User Instructions
WIC-16Z4P WIC-5Z2P User Instructions Page : 2/14 INDEX # Function Page 1 Add a New User Code 11 2 Arm or Disarm All Areas or Disarm Selected Areas (Partitioned System) 8 3 Arming the System (Away Mode)
More informationRUNNER 8/64. 8/64 Zones Control Panel. Program Summary Guide
RUNNER 8/64 8/64 Zones Control Panel Program Summary Guide SOFTWARE VERSION This manual relates to RUNNER 864 control panels with software version V10.0.115 and above Special Programming Operating Procedures
More informationVersion 1.03 January-2002 USER S MANUAL
Version 1.03 January-2002 1 USER S MANUAL 2 Version 1.03 January-2002 System Details CUSTOMER:...... PHONE:... FAX:... INSTALLED BY:...... PHONE:... FAX:... MAINTENANCE & SERVICE:...... PHONE:... FAX:...
More informationDestiny Destiny Owners Manual
Destiny 4100 Destiny 4100 Owners Manual TABLE OF CONTENTS INTRODUCTION Control Panel...3 Detection Devices...3 Telephone Keypads...3 GLOSSARY... 4-5 LOCAL PHONE ACCESS Using Your Telephones As Keypads...6
More informationAlarm Control Panel WIC-16Z4P WIC-5Z2P. Installation & Operation User Manual
WIC-16Z4P WIC-5Z2P Installation & Operation User Manual Page : 1/34 INDEX # Function Page 1 Abort Current Communication and Clear Reporting Queue (*59) 13 2 Abort Current Communications (*59) 10 3 Account
More informationIDS S E C U R I T Y IDS816. User Manual. MANUAL NO A ISSUED November 2004 VERSION 1.00
INHEP DIGITAL IDS S E C U R I T Y IDS816 User Manual MANUAL NO. 700-283-02A ISSUED November 2004 VERSION 1.00 Contents 1. Introduction to the IDS816... 4 2. Understanding the Keypad Indicators... 4 3.
More informationSolution Ultima Series Operators Manual ISSUE 1.00
Solution Ultima Series Operators Manual ISSUE 1.00 Solution Ultima Series Operators Manual Copyright 1998 by, SYDNEY, AUSTRALIA Document Part Number MA488O DOCUMENT ISSUE 1.00 Printed 16 February 1999
More informationContents. Glossary Introduction to the IDS Notes Understanding the Keypad Indicators Operation of the Keypad...
2 Contents Glossary...7 1. Introduction to the IDS805...8 1.1 Notes...8 2. Understanding the Keypad Indicators...8 3. Operation of the Keypad...9 4. System Information...10 4.1 Programmed Functions...10
More informationCC880/LP880, SC8016. Operators Guide Solution-16, Solution-16 Safecom
CC880/LP880, SC8016 EN Operators Guide Solution-16, Solution-16 Safecom CC880/LP880, SC8016 Operators Guide EN 2 Copyright Notice Unless otherwise indicated, this publication is the copyright of Bosch
More informationDESTINY OWNER S MANUAL
DESTINY OWNER S MANUAL DESTINY You have made a wise decision to protect your family and property with the DESTINY Security System. The DESTINY has been designed to provide you with a maximum level of security
More informationAXI LED USER MANUAL (REV. 1.0)
Security & Home Automation System AXI LED USER MANUAL (REV. 1.0) CONTENTS PREFACE FEATURES LED KEYPAD OUTLOOK 1.0 LIGHT INDICATION 1 2 4 6 CHAPTER 1: ALARM SYSTEM CONTROL 1.0 USING LED KEYPAD 1.0.1 ARMING
More informationMaster Code Arming Auto-Bypass Option - Home-Away Arming Entry Delay Off Arming
Master Code The 4 digit Master Code is used for arming and disarming the system, for programming additional access codes, and for changing other features. The Master Code will be supplied to you by your
More informationDESTINY 6100 SERIES SECURITY SYSTEM OWNER S MANUAL V1 12/01
DESTINY 6100 SERIES SECURITY SYSTEM OWNER S MANUAL 800-6006V1 12/01 System Overview General Information Control Panel Detection Devices You have made a wise decision to protect your family and property
More informationSolution 844 Operators Manual ISSUE 1.10
Solution 844 Operators Manual ISSUE 1.10 Solution 844 Operators Manual Copyright 2001 by, SYDNEY, AUSTRALIA Document Part Number MA406O DOCUMENT ISSUE 1.10 Printed 24 April 2001 This documentation is provided
More informationSCORPION Z16040C, Z8040C and Z5120C
SCORPION Z16040C, Z8040C and Z5120C Alarm Controller User Instructions Thank you for choosing to purchase this micron security alarm controller. Micron product is manufactured to exacting quality standards.
More informationUnderstanding the Code Pad lights...4. Code Pad tones...5. Fully arming the system On MODE...6. Fully arming the system - Quick Arm MODE...
TABLE OF CONTENTS...Glossary of terms...2...code Pad Diagram...3 Understanding the Code Pad lights...4 Code Pad tones...5 Fully arming the system On MODE...6 Fully arming the system - Quick Arm MODE...6
More informationSolution Ultima 862 Operators Manual ISSUE 1.10
Solution Ultima 862 Operators Manual ISSUE 1.10 Solution Ultima 862 Operators Manual Copyright 2001 by, SYDNEY, AUSTRALIA Document Part Number MA486O DOCUMENT ISSUE 1.10 Printed 24 April 2001 This documentation
More informationUser s Guide. SUB-MA7240O-0001.OG.Solution doc. Created: 6/05/03. Last Updated: 23/09/03. MA7240AO-0001 Version 1.0
User s Guide SUB-MA7240O-0001.OG.Solution40-111.doc Created: 6/05/03 Last Updated: 23/09/03 MA7240AO-0001 Version 1.0 2 Table Of Contents User List...6 Quick Reference..7 Features...7 Keypad User's Guide...8
More information16 ( Ver: Installation & Programming Guide. Power Wave 16 Zone Control Communicator. Crow Electronic Engineering (Australia) Pty Ltd
Power Wave 16 Zone Control Communicator 16 ( Ver: 6.28 ) This Manual is Preliminary. Please refer to the Condensed manual for additional information Crow Electronic Engineering (Australia) Pty Ltd Installation
More informationInstallation & Programming Guide. ELITE S LITE Version. (8/16 Zone Control Communicator) Arrowhead Alarm Products Ltd
ELITE S LITE Version V9 (8/16 Zone Control Communicator) Arrowhead Alarm Products Ltd Installation & Programming Guide Proudly Designed and Manufactured in New Zealand Arrowhead Alarm Products Ltd PHONE:
More informationRANGER 7600 DOWNLOADABLE CONTROL COMMUNICATOR INSTALLATION MANUAL
RANGER 7600 DOWNLOADABLE CONTROL COMMUNICATOR INSTALLATION MANUAL TABLE OF CONTENTS 1. TABLE OF CONTENTS... P.1 2. GENERAL DESCRIPTION... P.2... 3. STANDARD AND OPTIONAL PARTS LIST... P.2... 4. FEATURE
More informationIDS800 USER MANUAL. Summary of Operation. + [ ] 2 IDS800 USER MANUAL NO K ISSUED APR 2003 VER 1.44
Summary of Operation A rm/ disarm [#] + [USER CODE] Quick Quick Quick Away Arm Stay Arm Stay Arm & Go H old down [ 1] for 1 second H old down [ 5] for 1 second H old down [ 6] for 1 second Panic Fire Medical
More informationUsing Your. Security System With LED Keypad S5030, S5031, S5032
Using Your Security System With LED Keypad S5030, S5031, S5032 Contents 1 Overview Your Security System... 1 How Your Security System Works... 2 Your System's Programming... 3 Getting Used to Your System...
More informationControl/Communicator Installation Manual
DAS NETWORX NX-12 Control/Communicator Installation Manual General Description...2 Ordering Information...2 Option Definitions...3 Programming the LED Code Pads...5 Programming the NX-12...9 Types of Programming
More informationNESS 5000 SERIES DIALLER
NESS 5000 SERIES DIALLER INSTALLATION MANUAL This manual is designed to provide the installation instructions on the NESS SECURITY PRODUCT'S 5000 SERIES Dialler. For complete details on the warranty or
More information2200 and 2200L ALARM CONTROL SYSTEMS
2200 and 2200L ALARM CONTROL SYSTEMS OPERATING INSTRUCTIONS MODELS: 2200 (fitted software 3.4 or later) 2200L (fitted software 3.9L or later) Castle Care-Tech Ltd. 2200/2200L Alarm System Operating Manual
More informationSeries. NX-4-EUR Control Panel. Installation manual
g GE Security NetworX TM Series NX-4-EUR Control Panel Installation manual CONTENTS CONTENTS...2 GENERAL INFORMATION...4 ORDERING INFORMATION...4 FEATURE DEFINITIONS...5 PROGRAMMING THE NX-4 KEYPADS...12
More informationNextGen Home Security. Quick Reference Guide
TM NextGen Home Security Quick Reference Guide Fire Auxiliary Panic (not active) Stay Away Chime Reset Bypass To view the full user manual, go to www.bellaliant.net/homesecurity and select Support. Arming
More information3 User s settings. 3.3 Internal clock setting
2.9 Subsystem arming In a large building a sub control panel can be enrolled to the JA-63. The subsystem reports all alarms and failures to the main system. The installer can program if the systems will
More informationJA-63 Profi User manual
JA-63 Profi User manual Contents: 1 Limited warranty... 2 2 Indicators... 3 3 Controlling the system... 4 3.1 Arming... 5 3.2 Disarming... 6 3.3 Panic Alarm... 6 3.4 To stop ALARM... 6 3.5 Home arming...
More informationMEDI-CALL UNIT INSTALLATION MANUAL. Medi-Call V2.0 - V2.7 Installation Manual
MEDI-CALL UNIT INSTALLATION MANUAL Medi-Call V2.0 - V2.7 Installation Manual Copyright SmartLink International Pty Ltd February 2006 475 Nepean Highway, Brighton VIC 3186 Australia Telephone: +61 3 9596
More informationDigiplex System V2.14 / V2.2ACC. Control Panel Programming Guide
Digiplex System V2.14 / V2.2ACC Control Panel Programming Guide Table of Contents Getting Started...2 What Do I Do First?...2 How Do I Program the Control Panel?...2 Single Digit Entry Method...2 Multiple
More informationICP-CC488 ICP-CC488 EN. Control Panel. User s Guide
ICP-CC488 EN User s Guide ICP-CC488 Control Panel ICP-CC488 User's Guide Notices EN 2 Copyright Notice Unless otherwise indicated, this publication is the copyright of Bosch Security Systems, Inc. ( Bosch
More informationDigiplex LED Keypads User s Manual
KLEDEU03.fm Page -1 Friday, May 4, 2001 11:25 AM Digiplex LED Keypads User s Manual KLEDEU03.fm Page 0 Friday, May 4, 2001 11:25 AM KLEDEU03.fm Page 1 Friday, May 4, 2001 11:25 AM TABLE OF CONTENTS 1.0
More informationALARM CONTROL PANEL AND DIALLER USER S MANUAL. Revision 4.5 A$15.00 INC GST. Ness D8 control panel User s manual
D8 ALARM CONTROL PANEL AND DIALLER USER S MANUAL A$15.00 INC GST Ness D8 control panel User s manual Revision 4.5 Ness Security Products Pty Ltd Quality Endorsed Company ISO9001 LIC.No. QEC2074 NSW Head
More informationInstallation Manual Premier 412/816/832. Issue 10
Installation Manual Premier // Issue 0 Premier // Installation Manual 5. Operating the System Introduction Before attempting to operate the alarm system ensure you have familiarised yourself with all the
More informationPower Wave Zone Alarm Panel V8.5. Installation Manual
Power Wave - 8 8 Zone Alarm Panel V8.5 Installation Manual 7 December 2001 Crow (Aust) Electronic Engineering Pty Ltd Corporate Head Office: 429 Nepean Hwy, Brighton East, Vic., 3187 Australia Phone: +61
More informationWireless Keypads LKP(E)S8M Series
Wireless Keypads LKP(E)S8M Series User manual Contents Congratulations on your purchase of this Honeywell wireless keypad. To make the best out of your equipment we advise you to read this manual carefully.
More information2000 SERIES DIAGNOSTIC ALARM CONTROL SYSTEM
2000 SERIES DIAGNOSTIC ALARM CONTROL SYSTEM OPERATING INSTRUCTIONS MODELS: 2300 2500 2700 This information is relevant to systems fitted with Issue 4.1 (or later) Master Keypad Software, also to Networked
More informationSummit 3208GLD USER MANUAL. Electronics Line
Summit 3208GLD USER MANUAL Electronics Line Table of Contents 1: Introduction... 2 2: Overview... 3 3: Keypad Functions... 4 3.1: Keypads... 4 3.2: 3108 LCD Keypad Layout... 4 4: Basic System Operation...
More informationTABLE OF CONTENTS TABLE OF CONTENTS 1
TABLE OF CONTENTS TABLE OF CONTENTS 1 FEATURES 2 Keypad Programmable... 2 EEPROM Memory... 2 Static/Lightning Protection... 2 Supervision... 2 Operation... 2 SPECIFICATIONS 2 PC1550 Control Panel... 2
More informationRANGER 8600 DOWNLOADABLE CONTROL COMMUNICATOR INSTALLATION MANUAL
RANGER 8600 DOWNLOADABLE CONTROL COMMUNICATOR INSTALLATION MANUAL TABLE OF CONTENTS GENERAL DESCRIPTION... 2 STANDARD AND OPTIONAL PARTS LIST... 2 PARTS DIAGRAM... 3 TERMINAL DRAWING AND SPECIAL NOTES...
More informationCC408. Quick Reference Guide Solution 880
CC408 EN Quick Reference Guide Solution 880 CC408 Quick Reference Guide Notices EN 2 Copyright Notice Unless otherwise indicated, this publication is the copyright of Bosch Security Systems Pty Ltd ( Bosch
More informationUSER GUIDE. PowerMaster-10 G2 Fully supervised wireless alarm control system.
USER GUIDE PowerMaster-10 G2 Fully supervised wireless alarm control system www.visonic.com PowerMaster-10/30 G2 Version 17 User's Guide Table of Contents 1. Introduction... 3 Preface... 3 Overview...
More informationU ser's Guide PC6010
User's Guide PC6010 Quick Reference Guide This manual is for Basic and Advanced users. Each of these types of user can access a different set of functions. The and symbols next to the title of each procedure
More informationNX-148 LCD CODE PAD TABLE OF CONTENTS
NX-148 LCD CODE PAD TABLE OF CONTENTS Glossary Of Terms... 4 Understanding The Lights... 5 Code Pad Functions Arming In The ON Mode... 6 Making The System Ready To Arm... 7 Using Quick Arm... 7 Arming
More informationTABLE OF CONTENTS. FOR THE RECORD 15 PROGRAMMING WORK SHEETS 16 CONTROL PANEL WIRING DIAGRAM inside back cover
TABLE OF CONTENTS FEATURES 2 SPECIFICATIONS 2 INSTALLATION 3 Mounting the Panel... 3 Mounting the Keypad... 3 Auxiliary Power Connection... 3 PGM Terminal Connections... 3 Bell/Siren Connection... 3 Keypad
More informationSolution 862 Installation Manual ISSUE 1.30
Solution 862 Installation Manual ISSUE 1.30 MA406I This page has been included for you to cut out and insert into the spine of the folder Solution 862 Installation Manual ISSUE 1.30 (61-2) 9672 1233 Solution
More information0 4 / 0 4 / 1 4. GE Concord 4 Quick User Guide. GE Concord 4 Quick User Guide Page 1
0 4 / 0 4 / 1 4 GE Concord 4 Quick User Guide GE Concord 4 Quick User Guide Page 1 Before Calling Is the keypad beeping? Press *. This will silence the beeping and let you know where the trouble is. Is
More informationUser s Information Guide R2A
Pi HSC505 Home Security Controller User s Information Guide R2A Page 1 of 15 of its development program. 1This document and product are copyrighted and all rights are reserved. Introduction Convention
More informationICP-CC408 ICP-CC408 EN. Control Panel. User s Guide
ICP-CC408 EN User s Guide ICP-CC408 Control Panel ICP-CC408 User's Guide Notices EN 2 Copyright Notice Unless otherwise indicated, this publication is the copyright of Bosch Security Systems, Inc, ( Bosch
More informationEasyLoader. End User Manual
EasyLoader End User Manual Table of Contents Table of Contents... 1 System Configuration... 3 Introduction... 4 SAFETY AND MAINTENANCE INSTRUCTIONS... 4 GLOSSARY... 4 Basic Operations... 8 ARMING YOUR
More informationWIRELESS ALARM SYSTEM WITH TELEPHONE AUTO DIALER
BAT.LOW AC WIRELESS ALARM SYSTEM WITH TELEPHONE AUTO DIALER THE SYSTEM THAT CALLS YOU! Our WIRELESS ALARM SYSTEM WITH TELEPHONE AUTO DIALER is designed to allow you to create your own security system.
More informationInstallation & Programming Guide
Alert Version 8 Zone Control Arrowhead Alarm Products Ltd Installation & Programming Guide Proudly Designed and Manufactured in New Zealand Arrowhead Alarm Products Ltd PHONE: (09) 579 7506 FAX: (09) 579
More informationHILLS Series LED Code Pad User Manual
HILLS Series LED Code Pad User Manual Not all features may be available on your system Check with your installer to find out which features are programmed Page 2 TABLE OF CONTENTS Code Pad Diagrams...2
More informationQuick Reference Guide
infinite Prime with Hybrid Connections User Manual - Version 1.00 Catalog Number: ZI0473A (1/07) All data is subject to change without prior notice. Hereby, Electronics Line 3000 Ltd. declares that this
More informationDYGIZONE GJD910 Lighting Controller & Enunciator
DYGIZONE GJD910 Lighting Controller & Enunciator MASTER WIRING IDENTIFICATION Power up to the DygiZone and you will see: All the LED s (red,yellow,green and blue buttons) will flash All the LCD icons will
More informationSolution-6 Operators Manual Page 1 Preface Congratulations on selecting the Solution-6 security control system for your installation. So that you can obtain the most from your unit, we suggest that you
More informationSolution 880 Operators Manual. Issue 1.00
Solution 880 Operators Manual Issue 1.00 Solution 880 Operators Manual Copyright 1998 by, SYDNEY, AUSTRALIA Document Part Number MA408O Document ISSUE 1.00 Printed 15 June 1998 This documentation is provided
More informationSecurity System. User s Guide for the Text Command Center
User s Guide for the Text Command Center MY ALARM COMPANY IS: CALL BEFORE TEST: THIS SECURITY SYSTEM IS CONNECTED TO TELEPHONE NUMBER: THE SECURITY CONTROL PANEL IS CONNECTED TO THE PHONE JACK LOCATED:
More informationRANGER 8980E DOWNLOADABLE CONTROL COMMUNICATOR INSTALLATION MANUAL
RANGER 8980E DOWNLOADABLE CONTROL COMMUNICATOR INSTALLATION MANUAL TABLE OF CONTENTS GENERAL DESCRIPTION...2 STANDARD AND OPTIONAL PARTS LIST...2 FEATURE DEFINITIONS...3 TERMINAL DRAWING AND SPECIAL NOTES...4
More informationSecurity System. User Guide for the LED Command Center
Security System User Guide for the LED Command Center National Security Systems Inc (800)457-1999 MY SECURITY COMPANY IS: CALL BEFORE TEST: THIS SECURITY SYSTEM IS CONNECTED TO TELEPHONE NUMBER: THE SECURITY
More informationUser Guide PowerMaster-10/ PowerMaster-30 Fully supervised wireless alarm control system
Fully pervised ireless alarm control tem Fully pervised ireless alarm control rol tem Fully pervised User Guide PowerMaster-10/ PowerMaster-30 Fully supervised wireless alarm control system PowerMaster-10
More informationControl Panel ICP-SOL2-P/ICP-SOL3-P. en User's Guide
Control Panel ICP-SOL2-P/ICP-SOL3-P en User's Guide Control Panel Table of Contents en 3 Table of contents 1 Introduction 5 2 Specifications 6 3 Codepad Introduction 7 3.1 Codepad 7 3.2 Quick Codepad
More informationControl Panel ICP-SOL2-P/ICP-SOL3-P. en User's Guide
Control Panel ICP-SOL2-P/ICP-SOL3-P en User's Guide Control Panel Table of Contents en 3 Table of contents 1 Introduction 5 2 Specifications 6 3 Codepad Introduction 7 3.1 Codepad 7 3.2 Quick Codepad
More informationFire Command Keypad. XR5 User s Guide
Fire Command Keypad XR5 User s Guide Silencing an Alarm While the fire alarm horns, strobes, or sirens are sounding use one of the following methods to silence the alarm depending on which type of keypad
More informationTABLE OF CONTENTS. General Description Standard and Optional Parts List Feature Definitions Comments about the 8600E...
5$1*(5( DOWNLOADABLE CONTROL COMMUNICATOR INSTALLATION MANUAL TABLE OF CONTENTS General Description... 2 Standard and Optional Parts List... 2 Feature Definitions... 3 Comments about the 8600E... 4 Terminal
More informationTable of Contents. Appendix A Special Characters 31
Table of Contents Introduction 2 Section 1: General System Operation 3 1.1 Getting to Know Your System... 3 1.2 How to Arm... 4 1.3 Alternate Arming Methods... 5 1.4 Disarming... 6 1.5 Alarm Memory...
More informationThe most user friendly Security Alarm System L S Section 1 Overview of System Section 2 Planning your Installation
The most user friendly Contents Section 1 Overview of System 1.1 Kit Contents 1.2 Tools Required 1.3 System Features Security Alarm System L S 4 0 0 Section 2 Planning your Installation 2.1 Location of
More informationThe Challenger Version 8 User Guide
The Challenger Version 8 User Guide CONTENTS Function included in your system Introduction...4 Glossary... 6 The Challenger Console.. Liquid Crystal Display... 9 Keypad...10 Indicator Lights...11 User
More information1. Introduction. 2. Product overview
1. Introduction The AG400011 GSM Alarm panel is a control panel that is compatible with other H-net security devices from Everspring, such as wireless sensors, remote keyfobs, tags, and keypad. With this
More information16 and 16 plus User s Guide
16 and 16 plus User s Guide GALAXY 16+ V2.XX 06.22 TUE 30 JUN 1 2 3 4 5 6 7 8 9 * 0 # A u B u ent esc Contents INTRODUCTION... v QUICK OPERATION GUIDE...vii GLOSSARY OF TERMS... ix KEYPAD INFORMATION...
More informationPower Wave. 8 Zone Control Communicator. Crow Electronic Engineering P/L. Ver:8.54. Installation & Programming Guide.
Power Wave 8 8 Zone Control Communicator Crow Electronic Engineering P/L Ver:8.54 Installation & Programming Guide 8 November 2000 Crow ( Aust ) Electronic Engineering Pty Ltd Corporate Head Office: 429
More informationABORT Light flashes during an abort delay time; is on during or after an alarm report to the central station. EMERGENCY ACTIVATION KEYS
POWER Light is on when AC power is present; flashes to indicate a low battery condition. CHIME Light is on when the chime feature is active. ABORT Light flashes during an abort delay time; is on during
More informationRef.1067/032 Ref.1067/042
DS1067-033A Mod. 1067 LBT8631 BUS CONTROL PANEL 8/32 INPUTS Ref.1067/032 Ref.1067/042 USER MANUAL TABLE OF CONTENTS 1 PREFACE... 5 2 COMMAND DEVICES... 6 2.1 1067/021 DISPLAY KEYPAD... 6 2.2 ELECTRONIC
More informationQuick Programmer s Manual
Version 2.604 (31/03/05) p1 Quick Programmer s Manual 2005. Inner Range Pty. Ltd. Part Number: 630048V2 p2 Version 2.604 (31/03/05) TABLE OF CONTENTS. 1. PROGRAMMING FLOWCHART. The following flowchart
More informationPROGRAMMING PROCEDURES (Table 3)
CONDOPLEX 2600/2600A/2700 Suite Panel User Manual Document Version 8.4 Oct 19, 1998 Condoplex 1998 PROGRAMMING PROCEDURES (Table 3) FUNCTION PRESS KEYPAD DISPLAY Delete user code or duress code. 0 (hold)
More informationUSER CODES. User Codes (1-6 digits) Access Levels + Access Levels. Time Control Address Address Address Address User 1 (Master)
User Codes (1-6 digits) Access Levels Access Levels + Time Control User 1 (Master) 1 1 2 3 25 49 73 0 User 2 2 26 50 74 0 User 3 3 27 51 75 0 User 4 4 28 52 76 0 User 5 5 29 53 77 0 User 6 6 30 54 78 0
More informationSolution 4+4 Operators Manual ISSUE 1.25
Solution 4+4 Operators Manual ISSUE 1.25 Solution 4+4 Operators Manual Copyright 1997 by, SYDNEY, AUSTRALIA Document Part Number MA400O Document ISSUE 1.25 Printed 02 August 1999 This documentation is
More informationSystem Introduction. 1.1 Specifications
System Introduction S E C T I O N 1 1.1 Specifications Downloading Software Support PC585 uses DLS-1 v6.5 and up. Flexible Zone Configuration Four fully programmable zones; system expandable to eight zones
More informationA1UL PERS. Personal Emergency Response System. For Technical Support Please Contact Your Service Provider Or Distributor
A1UL PERS Personal Emergency Response System TABLE OF CONTENTS 1. READ THIS FIRST... 1 2. SYSTEM OVERVIEW.. 1 3. COMPONENTS 2 4. UNIT OPERATION! Standby Mode.. 3! Emergency Activation. 3! Answering Incoming
More informationD1265. User's Guide. Touchscreen Keypad
D1265 EN User's Guide Touchscreen Keypad D1265 User's Guide Contents This system includes a telephone line seizure feature. The system can be programmed to communicate with a central monitoring station
More informationDS7446KP. User Guide. Keypad
DS7446KP EN User Guide Keypad DS7446KP User Guide Command Quick Reference Command Quick Reference Command Type Basic Arming Commands Advanced Arming Commands System Disarming Commands Command Turn the
More informationBENTEL SECURITY srl reserves the right to modify the technical specifications of this product without prior notice.
BENTEL SECURITY srl reserves the right to modify the technical specifications of this product without prior notice. via Florida - Z.I. Valtesino - 63013 GROTTAMMARE (AP) - ITALY USER MANUAL: Digital communicator
More informationPOWERMAX PRO USER GUIDE Quick Guide To Primary Alarm Control Operations...2 Contact list form...2 Luminous Indicator Signals...2 Siren Signals...3 Useful Hints For PowerMax Pro Users...3 1. Introduction...4
More information