H-MOSS Occupancy Sensors Control Units and Add-A-Relay

Transcription

1 Control Units and Add-A-Relay Control Units Hubbell CD series control units are required for use with Hubbell ATD, ATU, ATP, and PIR series ceiling and wall mount occupancy sensors. The control units provide a V DC power supply for 1 to 3 sensors or sensor/add-a-relay combinations and contain an internal relay for the control of an external lighting load. Control Unit, 1V AC, 60 Hz, for use with ATD, ATU, ATP, Control Unit, 230V AC, 0/60 Hz, for use with ATD, ATU, ATP, Control Unit, 277V AC, 60 Hz, for use with ATD, ATU, ATP, Control Unit, 347V AC, 60 Hz, for use with ATD, ATU, ATP, CU1A CU230A CU277A CU347A CU1A, CU230A CU277A, CU347A Add-A-Relay Hubbell AAR Add-A-Relay is designed for use with Hubbell CU series control units and Hubbell ATD, ATU, ATP, and PIR series ceiling and wall mount occupancy sensors. The AAR contains an internal relay for control of an external lighting load. The AAR requires a V DC power supply from the Hubbell CU series control unit. The AAR is typically used when: 1) It is desired to switch more than one circuit when occupancy is sensed. 2) The lighting load exceeds the maximum rating of the control unit. Catalog Number Add-A-Relay, for use with CU series control units. AAR AAR Note: See pages D for technical data and wiring schematics. Dimensions in Inches (mm) HUBBELL) Wiring Device-Kellems ^^V \ I Jj<^S D-11

2 Adaptive Technology Wall Switches Hubbell wall switch occupancy sensors utilize passive infrared technology to determine occupancy. These sensors require line of sight to detect body heat in motion. Wall switch occupancy sensors are best suited for small enclosed spaces such as offices, conference rooms, storage closets, small lunch rooms, and copy rooms. Hubbell's complete offering of wall switch sensors enables you to choose the right product for these various applications. Hubbell AT series wall switches incorporate Adaptive Technology for performance critical applications such as enclosed offices and conference rooms. Adaptive Technology sensors automatically adjust the time delay setting to fit the application. This prevents false-offs that result when a sensor's time delay is too short for the activity level of the occupant. Product features and benefits are provided on page D-3. AT1I, AT1W, AT277I, AT277W 1V AC, 2 to 00 watts, 10 sq. ft. coverage, with photocell. 277V AC, 2 to 00 watts, 10 sq. ft. coverage, with photocell. AT1I AT1W AT277I AT277W Hubbell ATP series Adaptive Technology wall switch sensors are dual voltage rated for use on 1V or 277V AC applications. These sensors feature a pushbutton ambient light level control that allows for quick, accurate setting of the ambient light level threshold. ATP1277I,ATP1277W ATP1277GY 1/277V AC. 800 watts at 1V AC, 10 watts at 277V AC, 10 sq. ft. coverage, with photocell. Same as above except gray. Notes: Nylon wall plate supplied with each sensor. AT and ATP series wall switch sensors are gangable. See section K for additional wall plates. See pages D-14 for technical data and wiring schematics. ATP1277I ATP1277W ATP1277GY o 0 Horizontal Coverage _, ~(3.0m) (6.1m) 14." (36.8cm) Mounting Height 42" to 4" ( cm) Vertical Coverage \2 Of See Horizontal View for Range D-4 HUBBELL Wiring Device-Kellems Dimensions in Inches (mm)

3 Adaptive Technology Ceiling Sensors Dual (Ultrasonic and ) x lli/j Vm.'///I %W» ATD00CRP, ATD00C,11'^ Hubbell ATD series sensors incorporate both ultrasonic and passive infrared detection technologies. These dual technology sensors provide the most reliable means of automatic lighting control. Common applications include open office spaces, conference rooms, classrooms, and executive offices where flawless performance is necessary. An isolated relay and photocell are included on models with "RP" suffix. A CU series control unit is required for use with ATD series sensors. ultrasonic-32 khz), 00 sq. ft. coverage, with isolated relay ultrasonic-32 khz), 00 sq. ft. coverage. ultrasonic-32 khz), 00 sq. ft. coverage, with isolated relay ultrasonic-32 khz), 00 sq.ft. coverage. ultrasonic-40 khz), 00 sq. ft. coverage, with isolated relay ultrasonic-40 khz), 00 sq. ft. coverage. ATD00CRP ATD00C ATD00CRP ATD00C ATD00CRP ATD00C Notes: A CU series control unit is required for use with ATD series ceiling sensors. See page D-11 for control units and Add-A-F!elay. ATD00CRP, ATD00C ATD00CRP, ATD00C opassive Infrare oultrasonic LJ2" ^@f ATD00CRP, ATD00C ATD00CRP, ATD00C ATD00CRP, ATD00C D-6 Wiring Device-Kellems Dimensions in Inches (mm)

4 Adaptive Technology Ceiling Sensors Ultrasonic Hubell ATU series sensors detect occupancy based on an ultrasonic signal. Since these sensors do not require line of sight to detect occupancy, they work particularly well in areas with obstructions such as restrooms and storage rooms. Another common application is hallways. An isolated relay and photocell are included on models with "RP" suffix. A CD series control unit is required for use with ATU series sensors. 00 sq. ft. coverage, with isolated relay 00 sq. ft. coverage. 00 sq. ft. coverage, with isolated relay 00 sq.ft. coverage. Adaptive Technology, ultrasonic-40 khz, 00 sq. ft. coverage, with isolated relay Adaptive Technology, ultrasonic-40 khz, 00 sq. ft. coverage. ATU00CRP ATU00C ATU00CRP ATU00C ATU00CRP ATU00C Notes: A CU series control unit is required for use with ATU series ceiling sensors. See page D-11 for control units and Add-A-Relay. / ///*i-«n» : ATU00CRP, ATU00C iin'f/^ ATU00CRP, ATU00C ATU00CRP, ATU00C Ultrasonic ATU00CRP, ATU00C e _ / o ATU00CRP, ATU00C,- a ATU00CRP, ATU00C Dimensions in Inches (mm) QJH^?^ Wi " n9 Detfice - Kellen «i D-7

5 Ceiling and Wall Mount Sensors PIR00C, PIR00C Hubbell PIR series sensors detect occupancy based on a passive infrared signal. The ceiling mount model is available with a wide view lens for large areas with multiple occupants and a high density lens for areas with a single occupant where small motion detection is desired. The wall mount model is available with wide view and hallway coverage patterns and includes a photocell for ambient light level control. A CD series control unit is required for use with PIR series sensors. Passive infrared ceiling sensor, wide view lens, 00 sq. ft. coverage. Passive infrared ceiling sensor, high density lens, 00 sq. ft. coverage. Passive infrared wall mount sensor, wide view lens, 1600 sq. ft. coverage, with photocell. Passive infrared wall mount sensor, hallway lens, 7 linear ft. coverage, with photocell. Passive infrared ceiling sensor, wide view lens, 00 sq. ft. coverage, V AC, for use with Direct Digital Control (DDC) Systems. Adapter plate for use with PIR00C, PIR00C,, or LON1C when mounting on a 4" octagonal flush steel box and concrete ring. PIR00C PIR00C PIR1600W PIR90HW1 HMCAP Notes: A CU series control unit is required for use with PIR series ceiling and wall mount sensors. See page D-11 for control units and Add-A-Relay. PIR1600W, PIR90HW PIR90HW Catalog # PIR00C A(ft.) 28 B(ft.) PIR1600W PIR00C D- HUBBELL Wiring Device-Kellems Dimensions in Inches (mm)