Meditec M700 Series Patient Monitors

Transcription

1 Meditec M700 Series Patient Monitors

2 Advanced Monitoring Parameters ECGCardioTecTM 1lead ECG Analysis 1lead ECG to analyze I, II,III,aVR, avl, avf, V1V6 and display these waveforms on the same screen Two separate ECG cable to get accurate1lead ECG analysis 1lead ECG waveform display SpO The first signal processing and sensor technology capable of accurately monitoring physiology during motion artifact and low perfusion Gold Standard of SpO Identifies the venous blood and other noise, isolates them, and using proprietary techniques, etracts the arterial signal Mainstream CO & Sidestream CO CAPNOSTAT 5 Mainstream CO & LoFlo Sidestream CO Nomoline Sampling line Adult/Pediatric and Infant airway adapters Single use & Reusable Adapters for all kinds of patient

3 Advanced PlugIn Modules MultiGAS Masimo Sidestream & Mainstream Paramagnetic O sensors Long life cycle Saving ongoing hospital cost Support 4Channel IBP measurement Electroencephalography EEG measurement Provides realtime waveform from 4 channels / 8 channels / 16 channels EEG module is designed for continuous, realtime monitoring of adult, paediatric and neonatal patients in anaesthesia and intermediate/critical care environments. Abbott / Edwards/ BD / Utah IBP accessories can be selected to monitoring ABP, PAP, CVP, ICP etc ICG US BIoz Noninvasive Hemodynamic Impedance cardiograph for noninvasive continuous hemodynamic monitoring Microsignal transmission through disposable electrode Measurement and display of ICG Blood volume and Blood Flow Velocity varies with heartbeat. DISQ technology processes impedance signal variation Variation of impedance applies to noninvasive Z MARC algorithm for acquiring SV, CO, SVR, Contractility and TFC etc. M797 & M757 modular monitors with option of transport monitor and separate modules for all vital signs Calculation Screens for Clinical use Module Epansion Rack (M797, M757) Drug Oygenation Ventilation Kidney Hemodynamic

4 Feature M797 M777 M Modular Upgradable Modular Anaesthetic Gas Module (CO, N O, HAL, ISO, ENF, DES, SEV, MAC) Paramagnetic Oygen Monitoring Cardiac Output Depth of Anaesthesia / BIS Respiratory Mechanics (RM) SVO ICG Impedance Cardiography Neuromuscular Transmission (NMT) EEG Up to 1 Up to 1 Up to 1 Waveform Recall Function Drug Calculator 10 hrs 10 hrs 10 hrs Defibrillation Interface & Cautery Protection Pacemaker Detection hrs 4 hrs hrs 4 USB & SD Card USB & SD Card 4 USB & SD Card TFT Screen Size Touch Screen Operation Type ECG Leads 1 Lead ECG Monitoring & Analysis ECG Review Arrhythmia & ST Segment Analysis SpO Temp Channels IBP EtCO Oy CRG Waveforms Graphics & Tabular Trends Builtin Liion Battery Backup Data Storage and Review HL7 Compliant Nurse Call Compatible 11 Kg 4.8 Kg 6 Kg Module Epansion Rack Wall Mount Standard Mobile Trolley Bed Rail Mount Connectivity with Central Monitoring System Inbuilt Thermal Printer Alarm System (Audible & Visual) Net Weight Option for Transport Monitor W

5 M757 M75 M751 M747 M Modular Modular Upgradable Upgradable PreConfigured Up to (optional) Up to (optional) Any One Up to 1 Up to 8 Up to 1 Up to 1 Up to 10 hrs 10 hrs 10 hrs 10 hrs 48 hrs 4 hrs 4 hrs 4 hrs 5 hrs 8 hrs 4 USB & SD Card USB USB & SD Card 1 USB 5.9 Kg 3.4 Kg 4.8 Kg 3 Kg Light Weight 1. Kg

6 Technical Specifications Standard Parameters Display NIBP General Parameters Method Oscillometric Mode Manual, Auto, Continuous Measuring Interval in AUTO mode 1//3/4/5/10/15/30/60/90/ 10/40/480 Min Continuous 5min, interval 5s Measuring Type Systolic Pressure, Diastolic Pressure, Mean Pressure Cuff Pressure measuring Range mmhg Pressure 1 mmhg Mean error 3 mmhg Maimum Standard deviation 3 mmhg Over pressure protection Dual Over pressure protection Suitable Bedside monitors for Adult/Paediatric & neonatal patients User selectable priority alarms Red, Yellow, Orange color coded 6.5mm/s, 1.5mm/s, 5mm/s, 50mm/s Sweep Speed Various working Standard Monitoring Display, Large Font Intensive interface selectable Care Display, Trend Graph/ Monitoring CoDisplay, Bed to Bed view Display (optional), OyCRG Dynamic View Display, Drug Dose Calculation Interface Tabular & Graphical trends Trends Events ECG, SpO, NIBP with waveform & review ECG Measured unit mmhg/kpa selectable Lead Mode Measurement types Systolic, Diastolic, Mean Systolic : mmhg Diastolic : 1015 mmhg Mean : 035 mmhg Pressure range for Paediatrics Systolic : 035 mmhg Diastolic : mmhg Mean : 0165 mmhg Pressure range for Neonates Systolic : 1035 mmhg Diastolic : mmhg Mean : 0110 mmhg 3 Leads (I, II, III), 5 Leads (I, II, III, avr, avl, avf, V) 1 Leads ((I, II, III, avr, avl, avf, V1 V6) Waveform Up to1 waveforms display on screen 4 selectable plus 0.5, 0.5, 1, cm/mv PACE Detection Automatic Defibrillation energy distributary Input voltage range ±8mV, polarized voltage: ±500mV CMRR Diagnosis >100 db (no 50Hz/60Hz software wave trap) Monitor >110 db (has 50Hz/60Hz software wave trap) Surgery >100dB (50Hz/60Hz software wave trap) System noise <30µV pp (RTI) HR Measuring and Alarm Range Adult/Paed Neo Accuracy Sensitivity Differential Input Impedance Electrode offset potential Patient leakage current ECG Signal Range ST Segment Monitoring Range Measure and Alarm 15 bpm 300bpm 15 bpm 350bpm ±1% or ±1bpm, which great 1 bpm > 00 μv PP 5 MΩ 300mVd.c. 600mVd.c. < 10 ua 6 mv (Vpp) mv Respiration SpO Method Measuring Range Alarm Range Accuracy with Adult / Paediatric with Lowperfusion Self / Nellcor / Masimo 1 100% 1 100% 1% Neonate 1 digit (70% 100% SpO) Undefined (0 70% SpO) 1 digit (70% 100% SpO) Undefined (0 70% SpO) Pulse Rate Measuring and Alarm Range 0 300bpm Temp Channel Sensor type Accuracy Measuring Range 0 50 C YSI (B Series) and CFFI 0.1 C 0.1 C (5 C 45 C), 0. C (0 5 C, C) Method Impedance between RF (RALL), RL (RALA) Respiration Rate Measuring and Alarm Range: Adult 0 rpm 10 rpm Neo/Ped 0 rpm 180 rpm 1 rpm Accuracy rpm Gain Selection 0.5,0.5, 1,, 3, 4, 5 Technical Specifications Optional Parameters IBP CO Channel Up to 4 channel Label ART, PA, CVP, RAP, LAP, ICP, P1, P Static Pressure Measuring Range () mmhg (up to 350 mmhg) Static Pressure Accuracy ±% or ±1mmHg whichever is higher Dynamic Pressure Measuring Range () mmhg Dynamic Pressure Accuracy % or 1mmHg which bigger Measuring and Alarm Range ART (mmhg) PA 6 10 (mmhg) CVP/RAP/LAP/ICP ()10 40 (mmhg) P1/P () (mmhg) 1 (mmhg) Zero range 00 mmhg Channel Measuring Mode Measuring Range CO mmhg Unit mmhg, %, Kpa CO 1mmHg Accuracy AwRR ±1 rpm Infrared Absorption Technique Sidestream or Mainstream AwRR InCO 150 rpm 1 mmhg, 0.1%, 0.1Kpa 1mmHg Accuracy CO mmhg, 0 40 mmhg Reading 5%, mmhg Alarm Delayed AwRR Response time seconds <3 seconds, includes transport time, risetime 1%

7 Technical Specifications Optional Parameters Depth of Anaesthesia/ BIS Cardiac Output (CO) Method Measuring range CO TB CO Accuracy CO TI Output parameters Alarm range Thermodilution Technique L/min 3 43 C TI 0.1 L/min TB, TI 5% or 0. L/min TB 0.1 C CO, Hemodynamic Calculation 3 43 C ()1 7 C 0.1 C 0.1 C Neuromuscular Transmission (NMT) Microprocessorcontrolled Stimulator Mode Surface Electrodes Needle Electrodes TOF, TOFS, PTC, 1Hz Twitch, 0.1Hz Twitch, DBS 3.3 and 3. (double burst), Tetanic Stimulation (burst), 5s50Hz or 100Hz Builtin, direct thermal piel array recorder up to 3 channel printing Output (accuracy±5% of full scale value) 1,, 3 channel selectable Constant current, 060mA(01/18µC) up to 5Kohm, Monophasic, 00µs or 300µs pulse width Print speed 5mm/s, 50mm/s Paper width 50mm Constant current, 06mA (00.4µC) up to 5KOhm. Monophasic, 40µs pulse width Power Supply Acceleration Transducer Accuracy±5% of full scale value Temp. Sensor Range C (accuracy ±5 C) Gas Measuring range CO NO Halothane Enflurane Desflurane Other Recorder Input Voltage Input Frequency AC 100V 40V 50/60Hz Environmental Conditions Multigas (AG) Technology Bispectral Inde (BIS) Electromyographic Strength (EMG) db (where 1µV = 40dB) Signal Quality Inde (SQI) 0 100% Suppression Ratio (SR) 0 100% Spectral Edge Frequency (SEF) Hz Total Power dB (where 1µV = 40dB) Burst Count 0 30 (with an Etend Sensor only) EEG (Continuous, two channel, realtime EEG waveform) Noise (EEG Waveform) < 0.3 µv RMS (.0 µv peaktopeak) : 0.5 Hz 50 Hz EEG Bandwidth 0.5 Hz 100 Hz (3 db) ± 10% Side Stream or Main Stream Storage CO, NO, Des, Iso, Hal, Sevo, Enf, O Operational 0 10% O 0 100% 0 100% AwRR 100 rpm 0 5% Isoflurane 0 5% 0 5% Sevoflurane 0 8% 0 18% Up to 3 waveforms display, Agent miture detection MAC value display Temp () 10 C 40 C Humidity 15% 80% Temp 0 C 40 C Humidity 15% 80% Atmospheric Pressure 700kPa 1060kPa Technical Specifications Central Monitoring System Standard Configuration Processor Display Print Data Dual Core 17"/19"/1" TFT screen HP printer 70hour full disclosure waveform review 140hour trend graphic review 10,000 alarm record review 50,000 historical patient records English ECG, RESP, SpO, NIBP, EtCO, etc. HR, RR, ST, SpO, PR, NIBP, TEMP, etc. Recorder Features Language Waveform Parameter Alarm Alarms Eternal thermal array Realtime recording, review recording and historical Reports recording Connection Mode High and low limits alarm Arrhythmia alarm Audible and visual alarm Bedside Monitors Support maimum 18 bedside monitors Display maimum 3 patient's information Key monitoring interface, display 6 waveforms Intellectualized Bidirectional Communication Complete solution for LAN, wireless LAN, and miture networking Power Supply Input Voltage Input Frequency AC 100V 40V 50Hz ± 1Hz

8 Central Monitoring System Bidirectional communication with Meditec Central Monitoring Station by wired or wireless connection 64 Beds display Large font display Wave review and print preview Standard Network Interface: TCP/IP central monitoring system, be able to observe full vital signs information of the patient Full Disclosure Waveform Observation: Large screen display, be able to observe 16 bedside monitors waveforms simultaneously. Selectable Dualscreen display. Bidirectional Communication: Unique Bidirectional communication function realize the mutual control of central monitor and bedside monitors Large Storage Capacity: 70hour full disclosure waveform review, 140hour trend graph review, 1000 alarm records review. 50,000 patient historical data. All the information can be stored in disk. Data File Review: Large storage capacity of full monitoring information for easy review, analysis and statistics Dual Screen: Support various data display methods and various windows layout. It can display the waveform and numeric information of ECG, SpO, RESP, NIBP, IBP, CO, etc. The key bedside monitoring function provides more detail information to the doctor. Operating System: Userfriendly central monitoring software built on Windows platform. Advanced information integration technology to realize the concentration management of all parameters. Full digital transmission to ensure the communication accurate and reliable. Stable Internet Connection: Standard configuration for 8 bedside monitors, support maimum 18 units 8, Pinner View, Harrow, Midd, HA1 4QA, United Kingdom Tel: sales@meditecengland.co.uk Website : *In view of continued product improvement Meditec International England Limited reserves the right to make changes in the equipment which may affect the information contained in this leaflet without giving any prior notice. Pictures are representative, accessories are optional and may vary at the time of supply. # R Dt Meditec International England Limited