CERTIFICATE OF APPROVAL No CF 5236 EMVER PAINTS INDUSTRIES LLC

Transcription

1 CERTIFICATE OF APPROVAL No CF 5236 This is to certify that, in accordance with TS00 General Requirements for Certification of Fire Protection Products The undermentioned products of Jebel Ali Industrial Area 2, Dubai, UAE Have been assessed against the requirements of the Technical Schedule(s) denoted below and are approved for use subject to the conditions appended hereto: CERTIFIED PRODUCT Ritver flame retardant grade polyurethane EVI flame retardant grade polyurethane paint system applied to beech wood substrate TECHNICAL SCHEDULE TS19 Class 0 / Class 1 (BS) See annex 1 for further product information Signed and sealed for and on behalf of CERTIFIRE Sir Ken Knight Chairman WCL Impartiality Committee Paul Duggan Certification Manager Warrington Certification Ltd Page 1 of 5

2 1. This approval relates to the use of the above construction product. The product has shown a fire performance of Class 1 (BS) in accordance with the requirements of Technical Schedule This approval does not cover other features such as durability, impact resistance, water absorption etc 3. The construction product is approved on the basis of: i) Initial type testing ii) Audit testing at the frequency as specified in Clause 11 TS 19. iii) Inspection and surveillance of factory production control iv) Certification under ISO 9001; This approval is applicable to the following product family: RITVER FLAME RETARDANT GRADE PU PAINT SYSTEM/EVI FLAME RETARDANT GRADE PU PAINT SYSTEM APPLIED TO BEECH WOOD SUBSTRATE 5. The construction product shall be mounted and fixed in accordance with manufacturers instructions. 6. Markings to the CERTIFIRE design referencing Emver Paints Industries LLC, CERTIFIRE and CERTIFIRE Ref. No. CF5236 shall be affixed to each construction product in the prescribed position. 7. This approval relates to ongoing production. The product and/or its immediate packaging is identified with the manufacturer s name, the product name or number, the CERTIFIRE name or name and mark, together with the CERTIFIRE certificate number and application where appropriate. 8. This approval has been prepared from test data summarised below and derived from the test reports referenced below. Full details of the product, justification for the conclusions given, along with validity statements are given in those reports. Page 2 of 5 Signed

3 Test Evidence BS 476: Part 7 test results Formal test data WF SPECIMEN No Maximum distance travelled at 1.5 minutes (mm) Distance (mm) Time to travel to indicated distance (minutes : seconds) 75 8:42 The product has been appraised as having a Class 1 performance when fire tested and assessed by Exova Warringtonfire to BS 476: Part 7: 1997 'Surface spread of flame test for materials'. Certification is awarded on the basis of initial type testing to BS 476: Part 7, as appropriate, initial inspection and ongoing surveillance of factory production control, and ongoing compliance with the scheme requirements including labelling of the product as specified. The currency of the certification may be verified at Page 3 of 5 Signed

4 Annex 1 The description of the specimens given below has been prepared from information provided by the sponsor of the test. All values quoted are nominal, unless tolerances are given. General description Flame retardant grade polyurethane (PU paint system applied to a beech wood substrate of composite Ritver flame retardant grade polyurethane (PU)/EVI flame retardant grade polyurethane Name of manufacturer of composite Thickness of coated product mm (determined by Exova Warringtonfire) Density of composite kg/m 3 Polyurethane based coating Ritver/EVI flame retardant grade polyurethane Name of manufacturer Colour reference Clear Transparent Final coating Number of coats Two product (test Application rate per coat 150 g/m 2 face) Specific gravity 1.26 g/cm 3 Application method Spray coating Trade name of flame retardant EVI & Ritver of flame retardant Amount of flame retardant 58% Curing process per coat Natural air dry Polyurethane based coating Ritver/EVI flame retardant grade polyurethane Name of manufacturer Colour reference Clear Transparent First coating product Number of coats Four Application rate per coat 150 g/m 2 Specific gravity 1.26 g/cm 3 Application method Spray coating Trade name of flame retardant EVI & Ritver of flame retardant Amount of flame retardant 58% Curing process per coat Natural air dry Page 4 of 5 Signed

5 Beech Beech Timber Timber species Fagus Sylvatica Thickness 16 mm, or more Density / weight per unit area Around 680 kg/m 3 Flame retardant details See Note 2 below Brief description of manufacturing process Note 1 - The sponsor was unwilling to provide this information. Note 2 - The sponsor of the test has confirmed that no flame retardant additives were utilised in the production of the component. Page 5 of 5 Signed