MOBILE HOT AIR HEATING SYSTEMS

Transcription

1 MOBILE HOT AIR HEATING SYSTEMS Issue 2012 Mobile hot air heating systems Mobile Heaters Heating Centers Quality with systems

2 RAPID HEAT ADAPTED TO YOUR NEEDS Hot air heating systems for air, to feel good, surprisingly easy, but highly effective No matter whether used for workshops, production halls, sales rooms, exhibition halls, sport centres, greenhouses: REMKO stationary hot-air heating systems make sure people feel good. We can guarantee the following: Immediate heat without preheating Fully automatic controls optional High operating safety in constant operation Immediate heat with hot air heating systems can be generated in fresh-air, mixed-air, and circulating-air operation. Fresh air operations The air to be heated is taken directly from the outside air. In case of corresponding outside conditions, this method guarantees clean, unused air. Fresh air is brought into the room from outside (only ventilation, no heating) during fresh-air operation in the summer. Mixed-air operation According to the setting, more or less fresh air is mixed together with the room air. This method reduces heating costs because previously heated air from the heated room is used on the one hand and covers the necessary fresh-air requirement on the other. Circulating-air operation The air is taken from the room being heated and blown into the same room again after heating. This method causes the lowest operating costs because only the previously heated room air is reheated and circulated. Low-noise REMKO hot water heaters for which hot water is the heating medium. Hot water as a heating medium is no problem with REMKO hot-water heaters. Without great expense, the units can be quickly mounted to the wall or ceiling. Extensive accessory programme We offer tailor-made, complete solutions. For this purpose, we provide a specific need assortment of accessory parts such as control units, chimneys, exhaust accessories, air intake accessories, duct systems, ceiling fans, and many other products. For rooms in which the comfort of the people in it determines the solution Sales rooms Exhibition halls Sports centres For workrooms and storage areas Production halls Warehouses Assembly plants Greenhouses 4

3 Technical data Moisture-proof thermostat Series ATK 25 Max. nominal heating capacity kw 25 Nominal heat capacity kw 22,5 Air volume m³/h Fuel EL heating oil/diesel Max. fuel consumption l/h 2,4 Tank capacity Litres 40 Tank heating built-in Power supply V/Hz 230/1~/50 Length mm Width mm 470 Height mm 685 Exhaust pipe adapter Ø mm 150 Weight kg Multi-function air distributor head Ref. No Special accessories Moisture-proof thermostat, Type RT-5, ready to plug in, low differential gap, protection class IP 54, incl. 10 m moisture-proof cable, plug connector and protective device made in steel sheet design Special exhaust gas hose with integrated rain hood, overall length 870 mm m flexible exhaust gas line made of special heat-resistant hose Multi-function air distributor head, 2 outlets with 200 mm Ø Hose connection piece for warm air hose 305 mm Ø REMKO warm air hose, 7.6 m long, 203 mm Ø, incl. fastening strap REMKO warm air hose, 7.6 m long, 305 mm Ø, incl. fastening strap Tube fastening ring, adjustable

4 OIL/GAS HEATERS CLK series with separate burner REMKO CLK 50 REMKO CLK 50 REMKO CLK Versatile application possibilities for construction site heating In case of sudden cold or undelayable, scheduled work, the heaters of the CLK Series bring the necessary heat to wherever it is desired. This makes construction independent of the weather because construction on a deadline means that work may be performed during the cold season. Structures, materials, and workstations must then be protected. Ideal for heating workshops, exhibition rooms, and halls The mobile units must be in place only during the desired operating time to provide immediate heat when needed without preheating time. Oil burner, brand as we choose, can be exchanged within minutes Extremely low exhaust gas loses and thus higher combustion-technical efficiency and optimum efficiency Plug connection for control of room thermostat Electrical oil preheating Automatic fan direction of rotation control (CLK 170-RV) Fork lift support rails (optional) Closed combustion chamber housing For a flourishing and blossoming garden No other heating system can be used so optimally in glass or plastic film greenhouses as our heaters. This applies on the one hand for the exact determination of the appropriate unit which in regards to the size of the greenhouse the heat capacity and for the desired operating time on the other. If required, the equipment creates heat without preheating time as in the case of conventional hot water heating systems or other heating plants. This means a reduction in the energy requirement and thus considerable cost savings. Also ideal for party and exhibition tents Whenever mobile, efficient heating power is needed: to guarantee a good mood at parties, trade fair tents that are happily visited, or provisory storage tents remaining in a temperature controlled environment. Numerous possibilities of hot air distribution with mobile power driver The CLK equipment Series can be called a true power driver without exaggeration. These units are the most efficient mobile REMKO heaters with specially optimised sickle fans. Efficient with high delivery pressure for the connection of hot air tubes. 14

5 Technical data Series CLK 30 CLK 50 CLK 70 CLK 120 CLK 150 CLK 170-RV Max. nominal heat capacity kw Nominal heat capacity kw 26, Air volume m³/h Fuel EL heating oil according to DIN or diesel fuel Max. fuel consumption l/h 2,8 4,5 6,6 11,8 14,0 15,5 Max. exhaust gas loss % Power supply V/Hz 230/1~/50 230/1~/50 230/1~/50 230/1~/50 230/1~/50 400/3~N/50 Max. nominal current A 1,8 2,0 4,0 6,0 8,8 8,4 Max. power consumption W Air outlet Ø mm Exhaust gas connection Ø mm Total length mm Total width mm Total height mm Weight with burner kg Closed burner hosing Service friendly oil burner Switch and control panel in a user friendly arrangement Efficient, especially optimised sickle fans CLK 170-RV with radial fan as standard 15

6 OIL/GAS HEATERS CLK series with separate burner Technical data Series CLK 30 CLK 50 CLK 70 CLK 120 CLK 150 CLK 170-RV Max. nominal heat capacity kw Nominal Nominal heat capacity kw 26, Air volume m³/h Heaters with oil burner 1) Oil preheating and oil-reservoir fitting Heaters with propane gas burner 1) 2) Heaters without burner ) Brand product of our choice 2) The gas connection must be performed by a licenced installer. Other accessories Moistureproof room thermostat, Type RT-5, ready for plug assembly, Type of protection IP Oil-reservoir fitting with oil filter and oil pipe (included in price of oil burner at delivery) Multiflex oil preheating retrofitting set (without oil burner at delivery) Retrofitting set for the single line set with antisyphoning valve and automatic deculator (flow control) Surcharge for single line oil connection set incl. automatic deculator (flow control) Oil tank, 60 litres, with tank heater and chassis Multifunctional air distributor head 2 capacitys Multifunctional air distributor head 3 capacitys à 200 mm à 200 mm à 300 mm à 200 mm REMKO hot air tube, 7.6 m long, 203 mm Ø, incl. tube fastening strap à 400 mm à 300 mm à 400 mm à 300 mm à 400 mm à 300 mm REMKO hot air tube, 7.6 m long, 305 mm Ø, incl. tube fastening strap REMKO hot air tube, 7.6 m long, 405 mm Ø, incl. tube fastening strap REMKO hot air tube, 7.6 m long, 505 mm Ø, incl. tube fastening strap Tube fastening strap, 203 mm Ø Tube fastening strap, 305 mm Ø Tube fastening strap, 405 mm Ø Tube fastening strap, 505 mm Ø Tube extension for hot air tube incl. 2 tube fastening straps (coupling piece) 5 running metres of flexible exhaust gas pipe made of highly heat-resistant special tubing (only applicable for short-term use) FAL exhaust pipe accessories (hot-dip-aluminised sheet steel) 3) , , , mm Ø /180 Ø mm Ø /180 Ø mm Ø /180 Ø mm Ø Ø mm Ø Ø mm Ø Ø Exhaust pipe, running metres bend T-bend Rain hood Roof bushing ) Attention: Cannot be used as a permanent exhaust gas plant! 16

7 ACCESSORIES Moistureproof room thermostat, Type RT-5, ready for plug assembly low switching difference, Type of protection IP 54, incl. 10 m moistureproof room cable, connecting plug, and protective unit of lacquered sheet steel For model ELT PGT DZH/DZ ATK/CLK HTK/HTL Oil tank, 60 litres, with tank heater and chassis For model CLK Multi-cylinder set for the connection of 2-3 gas cylinders For model PGM/PGT Multifunctional air distributor heads, 2 capacities Multifunctional air distributor heads, 3 capacities Hot air tubes, 7.6 m long, incl. tube fastening strap 203 mm Ø For model ELT 18 S CLK capacities with 200 mm Ø each for unit Type ELT 18 S, ATK, CLK 30/ capacities 300 mm Ø each each for unit Type CLK capacities 400 mm Ø each for unit Type CLK 120/150 / CLK 170-RV HTL 200/ capacities 200 mm Ø each for unit Type CLK capacities 300 mm Ø each for unit Type CLK 120/150 / CLK 170-RV HTL 200/ mm Ø For model ELT 18 S CLK HTL mm Ø For model CLK HTL mm Ø For model CLK HTL mm Ø For model HTL

8 REMKO INTERNATIONAL and somewhere near you! Take advantage of our experience and consulting services REMKO GmbH & Co. KG Air Conditioning and Heating Technology Im Seelenkamp 12 D Lage PO Box 1827 D Lage Phone: Fax: Internet: Your REMKO Dealer Hotline National +49 (0) International +49 (0) GS/PD/1/3.12 Subject to technical changes!