M P 1 2 F G C O M P R E S S O R TECHNICAL SPECIFICATIO N

Transcription

1 M P 1 2 F G C O M P R E S S O R TECHNICAL SPECIFICATIO N ( ~50Hz & V~60Hz) REFRITZ LTD

2 1.Compressor Type Compressor model Approximate Power Rated voltage/frequency Refrigerant Application Cooling method Control device Motor type Starting Capacitor MP12FG 5/7 hp V~50Hz V~60Hz R404A 1P Low back pressure(lbp) Fan Cooling Capillary tube or Expansion valve CSIR 61μF 2.Performance Data Displ.(cm3) 12.1 Capacity(W) 95% Inp.Power(W) 115% Rated urrent(a) 110% COP(W/W) 95% voltage/freqence (V/Hz) V/50Hz V/60Hz Testing condition: Test conditions LBP ASHRAE Evaporating Temp Ambient Temp Condensing Temp Suction Temp Subcooling Temp Running Condition Ambient temp. 10~43 Evaporating temp. Voltage range -40~ V~50Hz V~60Hz Max. condensing temp. 65 Max. winding temp. 135 Max. shell temp. 95 Max. discharge temp. 125 Page 1 of 7

3 4.Compressor Mechanical Information Tc Te cooling capacity KCAL/H(50Hz) cooling capacity W (50Hz) cooling capacity W (60Hz) consumption W(60Hz) Current A(60Hz) COP W/W (60Hz) Page 2 of 7

4 Oil type Oil charged POE 400±10ml Diameter of suction tube (I.D.) Φ mm Diameter of discharge tube(i.d.) Φ mm Diameter of process tube (I.D.) Φ mm Material of suction tube, process tube and discharge tube copper tube 5.Compressor Shape 6.Wiring Diagram CSIR: Note: Each of the starting relay the thermal protector the spring tap the terminal cover and the screw assembly is separately provided by our company. Page 3 of 7

5 7.Fixing Of Mounting Bracket and Cabinet Base Page 4 of 7

6 8. Assembly of starter and protector 8.1 Starting relay Starting relay Model: QLZ-9.05A Attracting current: 9.05A Type:Starting relay Release current: 7.70A max working voltage:350 V Assembly force 98N Disassembly force 25N Flammability: Anti-flammability 8.2 Thermal protector Model: B Max.T.C Amp.(25 ) A 11.0 Thermal Protector Trip time S 7.5~16 Open temp. ±5 105 Close temp. ±9 52 Min. T.C. Amp.(70 ) A ±15% 4.31 Assembly force 88N Disassembly force 12.5N Flammability:Anti-flammability 9.Delivery State No. Name Model Quantity CODE 1. Compressor MP12FG 1pcs 2. MOUNTING ACCESSORIES 2.1. Rubber Gasket 4 pcs E Plain Washer 4 pcs CTE Mounting Sleeve 4 pcs CTE Mounting Bolt M pcs GB Page 5 of 7

7 2.5 Mounting Nut M6 4 pcs GB Washer 4 pcs GB ELECTRICAL ACCESSORIES 3.1. Assembly of starter and protector QLZ-9.05A/B pcs 3.2 Terminal Cover\cable clamp 1 pcs T D\T A 3.3 STARTing capacitor 61μF 330V 1 pcs 3.4 Screw Assembly 1 pcs E Capacitor Bracket 1 pcs Self tapping Screw 1 pcs Self tapping Screw 1 pcs Notes:1.All electrical parts and equipment assembly are supplied separately, not installed on the compressor. 2.All electrical parts and equipment assembly according to Delivery states are all provided by our company. 10.Package Storage and Transportation Package type Quantity Transportation Storage unreusable 64pcs/box and 48pcs/box By truck or train Max. 2 layers Gross Weight Kg 766/588 Net Weight Kg 716/538 Volume m /0.76 Dimension: length width height (cm) and Main components Movement Trans. test requirement Wooden supporter foam divider plastic sheet cardboard cover wrapping Keep the compressor in normal or vertical position (a short time before compressor installed in the refrigerator). No allowable compressor s damage and performance loss. Page 6 of 7

8 11.Technical Items 1. After pulling off rubber plugs from the compressor tubes, please connect the compressor to the refrigeration system within 5 minutes. It is advisable to take off the first plug from process tube. No dust or humidity in the air is permitted to enter the compressor. 2. Earth connection should be fixed permanently and reliably. 3. The compressor must be mounted horizontally without tilting an angle more than Maximum operating ambient temperature is at When the compressor starts, balance pressure inside refrigeration system must be less than 0.69Mpa (Absolute). 6. The compressor must not be restarted unless at an interval of more than 5 minutes. 7. Please keep the compressor always vertically and never upset it during transportation while avoiding any vibration and shock. 8. Please store the compressor in a dry and ventilated place and keep it away from any humidity. 9. Please follow the transportation warning marks on the package for layer limitation. Do not roll the whole packages when loading or unloading. 10.Storage expiry is 6 months from the date of production. If it expired, please check the nitrogen pressure inside compressor and recharge it when it is necessary. Page 7 of 7