cultivate your atmosphere Sunline Infrared Heating Product Folder

Transcription

1 cultivate your atmosphere Sunline Infrared Heating Product Folder

2

3 NATURAL WARMTH Based on natural, physical processes and a high estimation for natural resources, DIRECTTECH stands for their systematic use with maximum efficiency. As the founder of Direkt-Erwärmungs-Technologie D.E.T. DIRECTTECH develops and produces most innovative and future-oriented product lines in the field of infrared heating systems, climate- and energy technologies. We design your optimal atmospheric environment through the harmonizing of HighTech and nature. Do not only drastically reduce your CO 2 -emissions but also save your energy costs. Responsibility for the future is our impulse. With the development of our products we are on the right way. Come with us! HEATING BASED ON THE PRINCIPLES OF DIREKT-ERWÄRMUNGS-TECHNOLOGIE D.E.T. SUNLINE products warm up any rooms, houses and industrial buildings with healthy infrared warmth similar to the sun. As a complete heating system or as an additional heating, High- Tech-Infrared-Elements with high-class heating technique are available in various designs and functions. You veritably safe 40 % of your heating costs and tons of CO 2! PRO ENVIRONMENT After examinations of Mister Dr. Dieter Achilles, Institute for Environment- and Energy Technology in Jena, an example of a 120 qm apartment shows the following average convincing numbers: The annual energy use of KWh with night storage heaters can be reduced down to % with an exchange through radiant heaters. Accordingly, it has the same effect on the running costs, of course. Additionally, there is a CO 2 -saving of 3,5-6 t annually and with the use of green electricity, you even receive a saving of t per year! Similar advantages arise from the high energy efficiency, also in comparison to other heating systems. Thereby, the change-over is easily possible for you. Present electric installations can be used in normal case. Through the low construction depth of the radiant heaters and the wide spectrum of forms and materials, there is no limit in your wishes of design.

4

5 SUNLINE STONE Top-quality marble and granite have the natural ability to convert conducted energy into long-waved infrared radiation. This ability to heat radiation was already realized in ancient times. SUNLINE STONE products combine most modern heating technique with this knowledge. This way, a comfortable indoor temperature arises. The low energy use preserves the environment and your finances. MATERIAL SUNLINE STONE elements are available in various sorts of marble and granite. They can be integrated very well in housings as well as business rooms as a decorative eye-catcher. Here, you can see a small assortment: Bianco Carrara Standard Jura Gelb Standard Multi Color Labrador Scuro Nero Assoluto Cleopatra Antik geb. DESIGN AND FUNCTION SUNLINE STONE elements are designated to be used as a wall-element. The design with insulation on the back side and the stainless steel-covering provides highest heat emission in the sphere of long-waving infrared. SUNLINE STONE elements can be very easily installed horizontal, as well as vertical. The DIRECTTECH heating technique guarantees a constant surface temperature of the elements. This leads to highest efficiency. TECHNICAL DETAILS SUNLINE STONE elements are characterized by their low construction depth. Setting your wished temperature can be easily regulated with a separate control system. An integrated temperature limiter excludes overheating of the SUNLINE STONE elements. Besides the standard sizes we produce individual formats if desired. sort nominal consumption nominal voltage nominal current rated frequency measurement weight installation depth EU Watt 230 V 3,91 A 50 Hz 1150 x 600 mm 62 Kg 55 mm EU Watt 230 V 3,04 A 50 Hz 900 x 600 mm 50 Kg 55 mm EU Watt 230 V 2,52 A 50 Hz 750 x 600 mm 40 kg 55 mm EU 3L 500 Watt 230 V 2,17 A 50 Hz 300 x 1150 mm 35 Kg 55 mm As standard you can choose between the sorts Bianco Carrara and Jura Gelb.

6

7 SUNLINE CRYSTAL Due to its natural capacity, glass possesses the excellent ability to convert conducted energy into long-waving infrared radiation. SUNLINE CRYSTAL elements are very light and offer various interesting possibilities of design. SUNLINE CRYSTAL connects comfortable indoor atmospherical environment and modern design with low energy use. A vision becomes reality. SUNLINE CRYSTAL elements are characterized by their low depth in construction. Setting your wished temperature can be easily controlled with a separate funk thermostat or with a thermostat proper to your switch program. An integrated temperature limiter excludes overheating of the SUNLINE CRYSTAL elements. SUNLINE CRYSTAL elements possess a premium insulation and a radiation protection on the back side. Glass SUNLINE CRYSTAL elements are made of heat resistant glass. They can be ordered in almost every standard RAL-colour. Up to your taste, you can easily integrate them in your surroundings. Black and white are our standard colours. FRAMES Matt-finished silver is our standard colour. DESIGN AND FUNCTION Due to their weight, SUNLINE CRYSTAL elements are proper for the various use at walls and ceilings. The installation is possible with different profiles in different colours and sizes. For the industrial area there are special elements available, for the simple installation in Odenwald ceilings.

8

9 Sunline Crystal Through its special DIRECTTECH heating technique, SUNLINE CRYSTAL achieves surface temperatures which leads to the maximum efficiency. This means that the conducted energy with the highest efficiency will be converted in long-waving infrared radiation. Even for big and high rooms SUNLINE CRYSTAL is absolutely proper. TECHNICAL DETAILS With profile Standard sort nominal consumption nominal voltage nominal current rated frequency measurement weight installation depth IP Watt 230 V 5,65 A 50 Hz 1197 x 597 mm 12 Kg 41 mm D Watt 230 V 4,35 A 50 Hz 1197 x 597 mm 12 Kg 41 mm D Watt 230 V 3,04 A 50 Hz 907 x 607 mm 9 kg 41 mm D Watt 230 V 2,17 A 50 Hz 597 x 597 mm 6 Kg 41 mm D Watt 230 V 2,17 A 50 Hz 1157 x 307 mm 6 Kg 41 mm D Watt 230 V 1,09 A 50 Hz 502 x 252 mm 2,5 Kg 41 mm With profile Flansch sort nominal consumption nominal voltage nominal current Special sizes are possible and will be produced on request. rated frequency measurement weight installation depth IP Watt 230 V 5,65 A 50 Hz 1265 x 665 mm 14 Kg 48 mm D Watt 230 V 4,35 A 50 Hz 1265 x 665 mm 14 Kg 48 mm D Watt 230 V 3,04 A 50 Hz 975 x 675 mm 10,5 kg 48 mm D Watt 230 V 2,17 A 50 Hz 665 x 665 mm 7 Kg 48 mm D Watt 230 V 2,17 A 50 Hz 1225 x 375 mm 7 Kg 48 mm D Watt 230 V 1,09 A 50 Hz 570 x 320 mm 3 Kg 48 mm The profile Flansch is available for wall- and ceiling installations. Profile Standard Profile Flansch

10

11 SUNLINE MIRROR A cool mirror with convenient heat rays which fill the whole room- this is only a contradiction at first glance. The long-waving infrared radiation creates a comfortable warmth, as the sun. SUNLINE MIRROR offers versatile variants of shape and design with highest functionality. Create your own wellness oasis in your bathroom! MATERIAL Through its heat resistant mirror glass, SUNLINE MIRROR presents highest heat efficiency in the long-waving infrared area and therefore provides your optimal comfort. Profile Standard Profile Flansch in combination with integrated illumination DESIGN AND FUNCTION SUNLINE MIRROR elements are lightweights. Therefore, they are perfectly proper for being used as wall- and ceiling elements. Various frame profiles are possible. You can easily hang them up like a picture. The profile Flansch is available for wall- and ceiling installations. TECHNICAL DETAILS SUNLINE MIRROR elements are characterized by their low depth in construction. You set your wished temperature individually with a separate remote control. Overheating is excluded through an integrated temperature limiter. All elements have a first class insulation and a radiation protection on the back side. sort nominal consumption nominal voltage nominal current rated frequency measurement As standard the SUNLINE MIRROR elements are equipped with a max surface temperature of 100 C. If desired, SUNLINE MIRROR elements can be ordered with a surface temperature of max. 130 C or 160 C. The outside measures of SUNLINE MIRROR with the profile Flansch are identic to the measures of SUNLINE CRYSTAL with the profile Flansch. weight installation depth IP1300M 1300 Watt 230 V 5,65 A 50 Hz 1197 x 597 mm 15 Kg 41 mm D1000M 1000 Watt 230 V 4,35 A 50 Hz 1197 x 597 mm 15 Kg 41 mm D700M 700 Watt 230 V 3,04 A 50 Hz 907 x 607 mm 11 kg 41 mm D500M 500 Watt 230 V 2,17 A 50 Hz 597 x 597 mm 8 Kg 41 mm D430M 500 Watt 230 V 2,17 A 50 Hz 1157 x 307 mm 8 Kg 41 mm D250M 250 Watt 230 V 1,09 A 50 Hz 502 x 252 mm 3 Kg 41 mm

12 BASIC PRINCIPLES OF SUNLINE PRODUCTS physical Principles Optimum heating SUNLINE products work with the long wave infrared or the better known Far Infrared which has the same frequency with which the sun warms our planet. Photons in this frequency (energy) charge the atoms and heat is emitted, the radiation process starts which heats up our living- and working spheres. LONG WAVE INFRARED RADIATION Even surface temperature No swirling up of Dust To enable you to understand the advantages of FAR Infrared in terms of heating efficiency we need to take into account its effect on solid substances. Contrary to short wave infrared which deeply intrudes into the masses and has to heat almost the whole mass before reflection begins, the long wave infrared only warms the surface of the substances. The heat radiation heats the surfaces of the walls, ceilings and floors. Through reflexion the heat spreads evenly over the entire room and brings a natural and pleasant warmth which is regarded as comfortable even at considerably lower temperatures, contrary to the classical air heating. This creates a healthier atmosphere and of course you will be saving energy and reducing your energy bills noticeably. Through the above mentioned sort of heating the surfaces, a basic tempering takes place and possible humidity is subducted from the existing cubic capacity and the dew-point is moving to the outside. The wall becomes a natural protective insulation which is a further savings effect. A comfortable climate arises at a room temperature of 18 0 C if all surfaces in the room reach a temperature of C. inside wall surface 23 0 C Infrared is reflected outside wall SUNLINE Product Convection heating Long-waving infrared of SUNLINE products hits the surface No Mould or fungus No Heat loss when Airing The steady heating leads to constant temperatures in the room, hereby the circulation of air, which arises from high differences in temperature between floor and ceiling, is amazingly reduced and the general usual swirling of dust drastically minimizes. This is a significant health factor besides the prevention of mould and fungal attack due to the dry material. A further advantage of heated material through infrared radiation is that there is no loss of heat while airing. This makes your savings program perfect. TEMPERATURE CONTROL All SUNLINE products can be equipped with temperature control devices. The control units can have timers and thermostat or both. It is then possible to program your desired temperature at a particular time and to optimize the economy. The application of thermostats is possible without additional installation works. SUNLINE products are only available in specialiced shops. The expert prepares an object-related calculation for your heat demand and a planning for installation.

13 The house is like the third skin of human. Is the outer skin wet and cold as a wet pullover, then you freeze, is the pullover dry, then it keeps you warm. You will feel this warming effect when warming the matter by long-wave infrared. INSTALLATION The changeover to SUNLINE products is very easy for you. Existing electric installations can be used in normal case. The installation of the panels takes place without any great effort. Due to the low construction depth of the elements and the wide spectrum of forms and materials, there are no boundaries set regarding your design wishes.

14 OUR SURVIVAL GUARANTEE From all known energy sources which the world provides for us, the energy generation of renewable resources is the only environment-friendly and affordable survival guarantee! All SUNLINE products can be combined with renewable energies. PRO ELECTRICITY Connected with renewable Energies More than a half of the energy demand in Germany is omitted to the heat market. At present, coal, natural gas and kerosene are predominantly applied as energy carriers. The burn-up of these fossil fuels produces a high CO2-emission and highly contributes to the climate change. The global outrunning supplies of fossil fuels cause rising prices and a growing dependence on suppliers. All these reasons explicitly speak for the use of current. Because current can be won out of renewable energies such as water power, wind power and solar energy only this will be ecologically justifiable and be the essential factor. The vision of autarkic energy supply will become reality. EFFICIENCY COMPARING 1 Comparison of annual total costs of different heating systems: Annual total costs ( /m 2 ) Radiant heating DIRECTTECH 2 Gascondensing boiler Oilcondensing boiler Air-waterheat pump cost of capital side costs consumption costs Comparison of annual total costs for different heating systems in an one family house (Insulation in line with EnEV2007) 1 Attachment to the report of Dr. Dieter Achilles, Institute for energy technology Jena from 9/4/ All information exclusively refers to the radiant heating of DIRECTTECH.

15 Sunline Advantages Efficiency In comparison to other heating systems SUNLINE products stand for high efficiency. low investment easy installation no maintenance charges low energy costs through high effectiveness no additional room costs because no need for a technique room VAriety SUNLINE products are flexible in application. as a complete heating system or as an additional heating, High-Tech-elements are available in different types of design and function individual controllability (thermostat) Safety SUNLINE products can be used unhesitatingly in humid and/or moist rooms and are passed by TÜV. Safety class 1, IP54 Comfort SUNLINE products create a natural, comfortable room climate with the convenience and speed of radiant heat. less heat loss when airing no dry heat air streams Pro for Allergic Persons SUNLINE products are also excellent for allergic persons: equal temperature distribution between ceiling and ground, thus no raised dust induced by convection FLEXIBLE IN APPLICATION SUNLINE products are available in individual forms and formats and are suitable for various applications, e.g. in private households and terraces as well as in the leisure area, sailing yachts or caravans in business- and office rooms, hotels, catering, also in the outside area, etc. in the social area such as schools, hospitals, nursing homes to dehumidify basements as well as to eliminate mould and gear cluster to dry out buildings

16 DIRECTTECH Global GmbH Bullermannshof 21 D Moers Fon: +49 (0)2841/ Fax: +49(0)2841/