OSNATHERM Areal-Heating 24V low voltage

Transcription

1 OSNATHERM Areal-Heating 24V low voltage Modern floor heating systems for comfortable living Ceiling Wall Made in Germany Floor

2 COMFORT AND HEALTH INCLUDED! Areal heating systems by OSNATHERM are highly eficient. They convert 99% of the energy needed into heat. Unlike conventional water-based heating systems, which are subject to high losses ( up to 50%) on the way to the radiator, we only use the energy where it is needed. With the corresponding accessories OSNATHERM heaters can be controlled and dimmed without any delay. This increases effectiveness and comfort and is good for your health. Due to high CO² emissions, oil and gas heating systems will soon disappear from the market. In Denmark they are already banned, others will follow to ensure the EU decreed values are achieved. Trust the heating technology of the future: energy eficient OSNATHERM heating systems. Made in Germany!

3 ADVANTAGES EXAMPLES OSNATHERM heating systems with Nano-Technologie: 10-year manufacturer warranty easy installation healthy and soothing heat very high energy eficiency no power losses antiallergic indoor climate mold prevention direct heat radiation invisible heating mm thick heating tracks Application areas: building restauration inexpensive room extension as full and/or additional heating a must for low energy houses HEATED FLOOR, WALLS OR CEILING - THE FUTURE OF MODERN HEATING TECHNOLOGY! 3

4 Above: thermal imaging of 24V-heating mat Left: Processing like a wallpaper WALL HEATING An OSNATHERM surface heating system can be used as wall, ceiling or floor heating Homogeneous heat distribution! As a 24V wall heating the OS- NATHERM surface heating is an outstanding system which is economical, safe, user-friendly, flexible and extremely comfortable. In addition, it is very discreet and disappears under the plaster, the wallpaper, the paint or under any creative plastering technique. OSNATHERM stands for the highest design standards and modern living. The heating tracks disappear invisibly into the wall! The OSNATHERM 24V surface heater allows you to heat in a completely new way. The extremely thin heating tracks (1.0 mm thickness) are placed on the wall like wallpapers. After cables have been connected in the skirting boards the wall can be plastered or wallpapered. The heating tracks disappear completely into the wall making traditional, space-consuming radiators obsolete. You can enjoy a pleasant, natural and healthy radiation of heat. Due to the highly eficient material, the energy is converted directly into heat, without line losses. This is eficiency at the highest level! The heating tracks work at 24V low voltage. This ensures a riskfree installation and operation and allows you to install pictures in predeined locations. 4

5 24V CEILING HEATING The application and function of ceiling heating is comparable to that of wall heating. The ceiling radiates a regular and pleasant radiant heat that warms the floor, the walls, all objects and the people in the room. Ceiling heaters are usually installed when there are not enough free spaces available for wall heating. The installation on ceilings or roof slopes is also very simple and highly effective and safe. The installation of the heating systems can be carried out by skilled craftsmen such as painters, upholsterers, room decorators, plasterers, dryers, etc. in just a few hours without dust and dirt. Electrical expertise is not required as the plug of the heating control can be connected directly to an existing grounded socket. We have an assembly and installation manual for every application. 5

6 FLOOR HEATING Due to the installation height of 1,0 mm the OSNATHERM 24V heating system is the ideal solution for renovations and new buildings. All living areas including the kitchen or hall will have a cosy temperature of up to 30 C. Due to its uniform and large-scale heat distribution, underfloor heating has become an extremely popular heating system in houses. In comparison the function of the OSNATHERM underfloor heating system is more superior to traditional water-based floor heating systems. Later installations of common floor heating systems are almost impossible whereas the installation of OSNATHERM 24V heating systems a lot easier and more cost-effective. All floorings, speciied by the manufacturer as suitable for floor heating, can be used. Especially suitable for this are parquet, vinyl or laminate (floating or in combination laid), tiles, cork, linoleum ect. For the best results and highest comfort, we recommend that approx. 80% of the floor space is covered with the heating system. Simply placed under tiles or laminate flooring done! 6

7 24V RELIABLE AND TRENDSETTING The energy eficiency of our 24V heating system is extremely environmentally friendly. The energy is converted directly into heat, without power losses and without producing CO2. In addition, the heating tracks are located directly behind the wall or under the flooring or ceiling, which enables a very dynamic heating behaviour with fast reaction times. This saves time and money. Operated with green electricity, the OSNATHERM heating system of today already fulils the requirements of tomorrow.. Standart values in watt per m² Passiv House 3-Liter House Low Energy House EnEV (insulated) House WLG Old House (poor insulation) The 24V low voltage is absolutely harmless and allows a risk-free, immediate placement of the heating tracks under wall, ceiling and floorings. For optimum electromagnetic compatibility, we recommend operating the heating mats with our perfectly matched OSNATHERM transformers. Rooms with poor or no floor insulation have a higher heat requirement and longer reaction times so that the heater cannot develop its full power properly. In such cases, we recommend the use of 15 W/m² 30 W/m² 40 W/m² W/m² W/m² OSNATHERM Nano heat treatment Aero-Gel for an optimum heat reflection Please see separate data sheet. for details. The heating mats can either be operated with 24 or 26V transformers. Because of the slightly higher performance, we recommend our 26V versions Artikel No. Description Output Dimension RPRs(VAT included) Floor heating mat with fleece, ca. 30 C 240W 300x63cm 174, Floor heating mat without fleece, ca. 30 C 240W 300x63cm 158, OSNATHERM Transformer 26V/160W 160W 153, OSNATHERM Transformer26V/300W 300W 201, OSNATHERM Transformer 26V/600W 600W 296, OSNATHERM Transformer 26V/1000W 1000W 462, Adjustable build-in Poti 22V - 26V for Temperature agjustment (option) 59, Cablekit (option) 19, Starterpackage I Heat to Go (ready for connection incl. 2m floor heating mat without fleece, transformer, connections, 2m cable) PLUG AND PLAY! Electromagnetic compatibility tested 160W 259,00 Made in Germany 7

8 OSNATECH GmbH Gewerbepark Bissendorf Germany Tel.: Fax: Mail: Visit us on Facebook