F A B G L A S S A N D M I R R O R

Transcription

1 Frameless Panel MSD1 FAB GLASS AND MIRROR Call: Office Timing: 8:30-18:00 EST Fax: (614)

2 INSTALLATION INSTRUCTION SHOWER ENCLOSURE MSD1 Please carefully read the installation instructions before installing. Check to make sure all of the accessories are in the package and you have the tools needed. It may be necessary to consult your tile supplier about the correct method for drilling tiles. In the unlikely event that there are any missing or damaged parts, please contact Fab Glass and Mirror directly at CAUTION: Risk of injury or product damage. During installation tempered glass should not come in direct contact with metal parts or it may shatter. Gaskets must always be used between glass and metal. Do not touch the edges of tempered glass with tools. Do not attempt to cut tempered glass as it will shatter. NOTE: Tempered safety glass is stronger than normal glass but is not unbreakable. A scratch on the glass or contact with a hard surface (such as a screw head) can cause it to break. If it does break, it loudly explodes into thousands of small pieces

3 1 Accessory list 1 Rubber Gasket (short) pc 1 5 Screw pc 2 2 Fixed Corner pc 1 6 KW-A038 Profile pc 1 3 Rubber Gasket (length) pc 1 7 Wall Plug pc 2 4 Fixed glass panel pc 1 1

4 2 Tools for installation 2

5 15mm 15mm 15mm 3

6 4

7 15mm 15mm 5

8 15mm 15mm 7

9 8

10 9

11 10

12 11

13 12

14 13

15 14

16 Use the glue to seal the slit between the wall and the profile,the fixed glass door and the tray to avoid the water leaks. 24h 15

17 Maintenance of Shower Enclosure 1.Cleaning: Use a soft, dry cloth to clean the shower enclosure and shower tray. If there is minor dirt, use a soft cloth or sponge dampened with a mild detergent to clean. To remove stubborn Dirt, use alcohol. When cleaning with a bathroom cleanser, follow the label instructions and use correctly. Do not use following items to clean: Acidic or alkaline solvents, hydrochloric acid, acetone thinners or scouring powder. 2.Usage and maintenance of shower door rollers. 1)Avoid striking the movable door, which may cause it to come loose. 2)Clean rails, wheels, sliders regularly and add lubricant (oil or lubricating wax) 3)Adjust the screws of sliders on a regular basis to ensure the sliders operate smoothly. 3. Maintenance of Tempered Glass 1).Do not use sharp objects against the surface to avoid damage. 2).Do not wipe the glass surface with corrosive liquids to avoid damaging the glossy surface. 3).Do not wipe the surface with an abrasive material to avoid scratches. 4.Maintenance of Aluminum Frame 1) Do not wipe with corrosive liquids or materials. 2) Do not use abrasive material (including toothpaste) for surface cleaning. 3) Do not scratch the surface with sharp objects.

18 INSTALLATION INSTRUCTION SHOWER ENCLOSURE MSD1 Please carefully read the installation instructions before installing. Check to make sure all of the accessories are in the package and you have the tools needed. It may be necessary to consult your tile supplier about the correct method for drilling tiles. In the unlikely event that there are any missing or damaged parts, please contact Fab Glass and Mirror directly at CAUTION: Risk of injury or product damage. During installation tempered glass should not come in direct contact with metal parts or it may shatter. Gaskets must always be used between glass and metal. Do not touch the edges of tempered glass with tools. Do not attempt to cut tempered glass as it will shatter. NOTE: Tempered safety glass is stronger than normal glass but is not unbreakable. A scratch on the glass or contact with a hard surface (such as a screw head) can cause it to break. If it does break, it loudly explodes into thousands of small pieces

19 1 Accessory list 1 Rubber Gasket (short) pc 1 5 Screw pc 2 2 Fixed Corner pc 1 6 KW-A038 Profile pc 1 3 Rubber Gasket (length) pc 1 7 Wall Plug pc 2 4 Fixed glass panel pc 1 1

20 2 Tools for installation 2

21 15mm 15mm 15mm 3

22 4

23 15mm 15mm 5

24 15mm 15mm 7

25 8

26 9

27 10

28 11

29 12

30 13

31 14

32 Use the glue to seal the slit between the wall and the profile,the fixed glass door and the tray to avoid the water leaks. 24h 15

33 Maintenance of Shower Enclosure 1.Cleaning: Use a soft, dry cloth to clean the shower enclosure and shower tray. If there is minor dirt, use a soft cloth or sponge dampened with a mild detergent to clean. To remove stubborn Dirt, use alcohol. When cleaning with a bathroom cleanser, follow the label instructions and use correctly. Do not use following items to clean: Acidic or alkaline solvents, hydrochloric acid, acetone thinners or scouring powder. 2.Usage and maintenance of shower door rollers. 1)Avoid striking the movable door, which may cause it to come loose. 2)Clean rails, wheels, sliders regularly and add lubricant (oil or lubricating wax) 3)Adjust the screws of sliders on a regular basis to ensure the sliders operate smoothly. 3. Maintenance of Tempered Glass 1).Do not use sharp objects against the surface to avoid damage. 2).Do not wipe the glass surface with corrosive liquids to avoid damaging the glossy surface. 3).Do not wipe the surface with an abrasive material to avoid scratches. 4.Maintenance of Aluminum Frame 1) Do not wipe with corrosive liquids or materials. 2) Do not use abrasive material (including toothpaste) for surface cleaning. 3) Do not scratch the surface with sharp objects.

34 1 Accessory list 1 Rubber Gasket (short) pc 1 2 Fixed Corner pc 1 3 Rubber Gasket (length) pc 1 5 Screw pc 2 6 KW-A038 Profile pc 1 7 Wall Plug pc 2 4 Fixed glass panel pc 1 1

35 2 Tools for installation 2

36 15mm 15mm 15mm 3

37 4

38 15mm 15mm 5

39 6

40 15mm 15mm 7

41 8

42 9

43 10

44 11

45 12

46 13

47 14

48 Use the glue to seal the slit between the wall and the profile,the fixed glass door and the tray to avoid the water leaks. 24h 15

49 Maintenance of Shower Enclosure 1.Cleaning: Use a soft, dry cloth to clean the shower enclosure and shower tray. If there is minor dirt, use a soft cloth or sponge dampened with a mild detergent to clean. To remove stubborn Dirt, use alcohol. When cleaning with a bathroom cleanser, follow the label instructions and use correctly. Do not use following items to clean: Acidic or alkaline solvents, hydrochloric acid, acetone thinners or scouring powder. 2.Usage and maintenance of shower door rollers. 1)Avoid striking the movable door, which may cause it to come loose. 2)Clean rails, wheels, sliders regularly and add lubricant (oil or lubricating wax) 3)Adjust the screws of sliders on a regular basis to ensure the sliders operate smoothly. 3. Maintenance of Tempered Glass 1).Do not use sharp objects against the surface to avoid damage. 2).Do not wipe the glass surface with corrosive liquids to avoid damaging the glossy surface. 3).Do not wipe the surface with an abrasive material to avoid scratches. 4.Maintenance of Aluminum Frame 1) Do not wipe with corrosive liquids or materials. 2) Do not use abrasive material (including toothpaste) for surface cleaning. 3) Do not scratch the surface with sharp objects.