SMARTPACK is the high efficiency packaged roof top air conditioning unit designed to provide make-up air and the energy recovery in the served zone.

Transcription

1 Technical Bulletin BT09N004GB-08 SMARTPACK PACKAGED AIR CONDITIONER ROOF TOP DIRECT EXPANSION HIGH EFFICIENCY CKN-XHE SERIES AIR-AIR HEAT PUMP Airflow from 2200 to 9600 m³/h SMARTPACK is the high efficiency packaged roof top air conditioning unit designed to provide make-up air and the energy recovery in the served zone. Easy to position thanks to its compact dimensions, SMARTPACK simplifies system installation and increases its reliability. It contains In fact all the functions that, in traditional systems, are entrusted to separate products and components that must be first carefully selected and then assembled on site. The automatic on-board control makes it possible to be used by non-specialised personnel, guaranteeing considerable savings in operating costs thanks, also to its high efficiency. SMARTPACK is therefore the ideal decentralised solution for the air-conditioning of shops, showrooms, outlet villages, bar and restaurants, service stations, small and medium service rooms and productive areas.

2 The data contained in this document are binding and may be changed by the manufacturer without obligation of prior notice. Reproduction, even is part, is FORBIDDEN Copyright - CLIVET S.p.A. - Feltre (BL) - Italia

3 Table of contents Features and benefits...4 Unit technical features Version: unit at constant capacity (Clivet abbreviation SHC) Version: unit at variable capacity (Clivet abbreviation CHC) Pressure drops of optional components Handling electric fan performance - Standard airflow Handling electric fan performance - Reduced airflow Handling electric fan performance - High airflow Exhaust electric fan performance Accessories Accessories separately supplied Option compatibility Dimensional drawings BT09N004GB-08 SMARTPACK 3

4 For many businesses, success depends on the right comfort of the users A correct air-conditioning is an essential component in the management of various sales areas. Optimum temperature and humidity, air purification and correct ventilation are primary factors that guarantee to users and operators to remain in these spaces independently of outdoor conditions. This is what happens in single shops as well as in outlet villages, automobile showrooms and in modern service stations. Make-up air becomes even more a determining factor in restaurants, to control odours and vapours. Ventilation and air conditioning are also fundamental in service rooms for the proper operation of the equipment they contain. Rooftop units are often the best solution for air conditioning the environments located in a single area Despite their apparently low costs, split and multisplit direct expansion systems have a lot of limits in these applications. For example, they require a separate system for the treatment of the primary air. The pipes that contain the refrigerant cross the served rooms and therefore they are subject to restrictions and use limitations. From a technical point of view they cannot operate in FREE- COOLING mode, which is very efficient and convenient thanks to the generated energy savings. On the other hand, the hydronic systems are certainly more complete and versatile. They make it possible to adopt various types of terminals in the served environment, from fan coil units exposed or integrated in the furnishings, up to radiant or induction systems. The cost for medium and small installations is often higher as they are more complex and require more labour for installation, startup and adjustment. In this context, many rooftop solutions available on the market help to simplify the installation as they reduce the quantity and quality of operations performed at the worksite. On the other hand, these units are often not very versatile and rather noisy, with limited functions, mediocre energy performance and a not very long lifetime. Rooftop units are often the best solution for air conditioning the environments located in a single area With more than twenty years of technological evolution, Clivet rooftop units represent the state of the art in climate control for large commercial and industrial environments. The specialised ranges for applications with medium to high occupancy are widely used in buildings such as hypermarkets, shopping centres, multiplex cinemas and restaurants. Their success is based on their high energy efficiency, their compact size and operation and maintenance simplicity as well as the great flexibility in selecting best suited the model for the specific installation. 4 SMARTPACK BT09N004GB-08

5 CLIVETPack series for medium attendance applications SMARTPACK CKT/N-XHE cooling only / reversible heat pump Nominal airflow: m3/h Cooling capacity: kw Configurations: CAK single fan section for full recirculation CBK single fan section for recirculation and fresh air CCK double fan section for recirculation, fresh air, exhaust, thermodynamic recovery CLIVETPack² CSRT/N-XHE cooling only / reversible heat pump Nominal airflow: m3/h Cooling capacity: kw Configurations: CAK single fan section for full recirculation CBK single fan section for recirculation and fresh air CCK double fan section for recirculation, fresh air, exhaust, thermodynamic recovery CCKP double fan section with fresh air and THOR thermodynamic recovery CLIVETPack² CSRT/N-XHE HSE cooling only / reversible heat pump Nominal airflow: m3/h Cooling capacity: kw Configurations: CAK single fan section for full recirculation CBK single fan section for recirculation and fresh air CCK double fan section for recirculation, fresh air, exhaust, thermodynamic recovery CCKP double fan section with fresh air and THOR thermodynamic recovery CLIVETPack² CSRT/N-XHE cooling only / reversible heat pump Nominal airflow: m3/h Cooling capacity: kw Configurations: CAK single fan section for full recirculation CBK single fan section for recirculation and fresh air CCK double fan section for recirculation, fresh air, exhaust, thermodynamic recovery CCKP double fan section with fresh air and THOR thermodynamic recovery CLIVETPack² CRH-XHE reversible heat pump Nominal airflow: m3/h Cooling capacity: kw Configurations: CAK single fan section for full recirculation CBK single fan section for recirculation and fresh air CCK double fan section for recirculation, fresh air, exhaust and FREE-COOLING CCKP double fan section with fresh air, exhaust and THOR thermodynamic recovery Clivet series for high attendance applications CLIVETPack² CSNX-XHE reversible heat pump Nominal airflow: m3/h Fresh airflow up to 80% Cooling capacity: kw Configurations: CCK double fan section for recirculation, fresh air, exhaust, thermodynamic recovery CCKP double fan section with fresh air and THOR thermodynamic recovery Clivet series for full fresh air application ClivetPACK² FFA CSRT/N-XHE2 FFA cooling only / reversible heat pump Nominal airflow: m3/h Cooling capacity: kw Configurations: CBFFA Configuration for fresh air inlet CCFFA Configuration for fresh air inlet with outlet BT09N004GB-08 SMARTPACK 5

6 SMARTPACK implements Clivet s technological evolution in small and medium sized commercial applications High efficiency Scroll compressors, electronically controlled fans, automatic renewal air management and air quality control through an integrated CO2 probe, FREE-COOLING, thermodynamical energy recovery, variable capacity versions: these are just some of the technologies available with SMARTPACK, a range of models that are ideal for air conditioning small and medium sized commercial and industrial rooms. The particular compactness and the resistance to atmospheric agents allows for the external installation of the served area: this is how maximum integration with the furniture is obtained and simplifies the periodical maintenance that can be fully carried out without accessing the ambient. Advantages SMARTPACK simplifies the system Thanks to its packaged design, the system components are already enclosed and installed inside the unit. The heating or cooling energy generated by the unit is transferred directly to the served environment. This eliminates all internal units, pipes, cables and technical spaces for their connection, and therefore also their related purchase and installation costs. SMARTPACK frees up precious space Its very compact design, even in comparison to rooftop units of the same size available on the market, makes it quick and easy to position it on a flat roof, in an attic or on the ground. All of the features are provided by Clivet already assembled and tested onboard, differently then other manufacturers who make numerous additional components available to be installed on site. SMARTPACK reduces consumption and management costs The high efficiency of the adopted technological solutions considerably reduces the energy required for their proper operation. This results in lower operating costs and CO2 emissions, to the benefit of the environment. The constructive rationality also simplifies the maintenance operations, resulting in a farther reduction in annual expenses for the user. 6 SMARTPACK BT09N004GB-08

7 The system is included into a single unit CLIVETPACK contains all the necessary components for its correct operation. In the standard configuration (Clivet reference key CAK), the return air is filtered and treated by the direct expansion cooling circuit and then introduced again into the area to be air conditioned. The configuration with the outdoor air damper (Clivet reference key CBK) allows to introduce a predetermined quantity of renewal air. The automatic control with a microprocessor is based on the conditions detected by the sensor installed in the served area and on those of the outdoor air. If the application is not suited for the installation of sensors in the served area, the optional on-board temperature and humidity probes are available. R. Air return S. Treated air supply FA. Outdoor air EX. Exhaust A. Supply fan and air filter Electronic control, which returns the air to the setting after having taken it in, strained it with G4 efficiency and treated it B. Internal exchanger Thermal energy releases (cool or heat) the inlet air C. External exchanger It exchanges energy (heating or cooling) with the outdoor air D. External fan Axial fan, allows the efficient energy exchange with the outdoor air E. Direct expansion circuit It produces cooling energy (or heating energy on reversible models) to be introduced in the served area F. User interface Easy to use, with automatic control sensors on-board. MAIN OPTIONS 1. High-efficiency filtration Electronic, second stage (equivalent efficiency H10) 2. Electric / hot water heating It integrates and/or replaces the direct expansion circuit operation. 3. Hot gas post-heating It recovers condensation energy in the summer humidity control 4. Humidification Immersed electrodes steam type 5. Fresh air Shutter (CBK/CCK configuration) It allows to introduce renewed air in the served area. The fresh air damper is manual in the CB construction configuration (optional on off motorized ) and modulating motorised version in the CC construction configuration. It is not present in the CA constructive configuration (100% recirculation). MODEL WITH EXTRACTION AND EXHAUST (configuration CCK) 6a. Extraction and exhaust fan Electronically controlled, it extracts the unhealthy air from the served area and it exhausts it outside after the thermodynamic energy recovery. It allows automatic FREE-COOLING operating. 6b. Overpressure damper It prevents the air inlet in the environment from the extraction/exhaust section with fan stopped 6c. Ambient pressure controller It calibrates the fresh air damper opening and to balance the ambient pressure. SMARTPACK is also available in the optional configuration equipped with air extraction and exhaust system (Clivet reference key CCK). This functionality is implemented with an extraction fan, which draws a part of the return air and ejects it on the outdoor finned coil exchanger, performing the thermodynamic energy recovery. This increases the seasonal efficiency of the direct expansion circuit, avoiding the large pressure drops typical of traditional static or rotary recovery units. This version also includes the automatic control of the modulating fresh air dumper and the FREE-COOLING function, which allows the cooling of the served area without activating the compressors. BT09N004GB-08 SMARTPACK 7

8 Versatile, efficient, encreases the value of your real estate investment Great system simplification and increase in reliability SMARTPACK significantly reduces the initial system costs in comparison to traditional solutions based on hydronic systems with separate production, for example with chillers and boilers, or on direct expansion systems with renewal of air. Most of the normal engineering activities are in fact created by Clivet inside the unit Component selection and dimensioning Water and mechanical connections Electric and control wiring Functional test The user simply has to connect the air distribution ducts and power the unit. Made for comfort and business The numerous options and accessories that are available make it possible to always select the best solution, based on the following factors: Outdoor climate, thanks to configurations for hot, temperate, severe or extremely severe climates; Building type and layout of the technical spaces, with possible positioning on the roof, in the attic or on the ground; Typical application and operating profile thanks to the version with 100% recirculation, with fresh air intake and also with integrated exhaust system; Required comfort level, with high efficiency filtration, air quality control, devices for humidity control; Importance of the energy savings for the user, thanks to functions such as FREE- COOLING, energy recovery, modulation of the renewal air. High/extremely high energy efficiency SMARTPACK is available in two versions that differ in the technology used for the direct expansion circuit: CONSTANT POWER UNIT also equipped with automatic regulation of the output power for maximum energy efficiency all year long. VARIABLE POWER UNIT also equipped with automatic regulation of the output power for maximum energy efficiency all year long. Increasing the value of the building and reducing operating costs The numerous technical solutions used in SMARTPACK s cooling circuit and ventilating sections makes it possible to obtain very high overall efficiency levels. This also reduces seasonal consumption up to 50% in comparison to traditional solutions. As a result, this also reduces operating costs and the environmental impact of the system, thanks to the lower amount of primary energy needed for its function. The reduction in the overall requirement for primary energy, in comparison to traditional solutions, improves the building s energy performance and therefore its market value. 8 SMARTPACK BT09N004GB-08

9 Refrigerant circuit optimized for energy saving and reliability Unit at constant capacity Using a simple and robust geometry composed by of a single constant power compressor in combination with a high efficiency cooling circuit, the unit delivers the adequate cooling capacity to the system. This is made possible thanks to the regulating logic which sequentially activates the compressors in order to reach the required comfort and keep the ambient temperature constant. High reliability scroll technology The entire range uses high efficiency orbiting spiral Scroll compressors. The advantages are: Compressors manufactured in large numbers on an industrial scale, with strict quality checks and highest reliability thanks to the high scale mass production volumes. High energy efficiency Stable and reliable operating The electronic expansion valve (EEV) adapts rapidly and precisely to the actual load required for usage, allowing stable and reliable adjustment in comparison with mechanical thermostatic valves (TEV). This results also in a further increase in efficiency and longer compressor life. Unit at variable capacity Besides taking advantage of the technical features adopted for the constant power units, the variable power unit favours the production energy efficiency. This is made possible thanks to the partialisation of the compressor capacity and the regulating system which provides the system only with the capacity that is actually required. In this case, the conditions of the introduced air vary constantly for maximum user comfort. The adopted solution uses Digital ScrollTM technology or different sized compressors on the same cooling circuit depending on the unit size. BT09N004GB-08 SMARTPACK 9

10 The technologies adopted for the continuous modulation of the yield power The need to adapt the delivered power to the required load becomes a compulsory condition in order to control energy consumption. The variable capacity unit satisfies this request. Digital Scroll TM Thecnology Unit size from 41 to 71 The operation of the Digital Scroll TM compressor, which is very simple and reliable, consists in alternating compression phases and refrigerant discharge phases by moving the spirals in the compression chamber nearer or further away. Changing automatically the two phases, it is possible to obtain a capacity modulation from 30% to 100%. This continuous modulation guarantees as plus the maintenance of the unit supply temperature at a value almost constant. A. Orbiting spiral B. Fixed spiral C. Refrigerant drain D. Modulation chamber E. Piston F. Solenoid valve G. Spring H. Refrigerant return I. Electrical motor OPERATION: CONTINUOUS MODULATION OF THE SUPPLIED CAPACITY USEFUL EFFECT: MAINTAINING THE REQUIRED TEMPERATURE Scroll compressors connected in tandem Unit size from 91 to 151 As maximum power is only required for short periods of time, it is very important to achieve maximum efficiency in partial load conditions. By using only one of the two compressors, efficiency is increased by more than 40%, thanks to the larger heat exchange surfaces. In addition, the selection of different sized compressors makes it possible to obtain more control steps, providing only the effectively necessary energy for use. By continuously adapting itself to the inlet air conditions in the environment, this solution also improves comfortable conditions for the users and operators. THE USE OF DIFFERENT SIZED COMPRESSORS OPTIMALLY COMPENSATES FOR THE AMBIENT LOAD THE SEQUENTIAL DEACTIVATION OF THE COMPRESSORS INCREASES EFFICIENCY Example referred to CKN-XHE 151. EER e COP referred to nominal temperature 10 SMARTPACK BT09N004GB-08

11 Configured for intelligent resource management and for user comfort Advanced standard electronic control SMARTPACK is also equipped with everything that is required for the automatic control of ambient temperature and humidity and, through their comparison with the outdoor air conditions: selects the operating mode (heating or cooling); decides which and how many resources to activate basing on the distance from the determined set-point; manages the renewal air and the FREE-COOLING activation to maintain the comfort conditions. Simple and intuitive user interface An innovative graphic interface prepared for wall-installation (with 230V power supply and wiring at the customer s care) is supplied as standard, with the option to be removed from the support and connected on-board for maintenance operations. Its main functions include: temperature and humidity survey through its internal probes; daily/weekly programming for switching the unit on and off; manual changing of the operating mode (heating or cooling) and/or the set-point; alarm and unit status display; management of the operating parameters. Prompt feedback in case of fire The unit logic manages the signal from a fire detection unit, implementing one of the actions shown in the table which can be set as a parameter. If there is an alarm signal and according to the set logic, the compressors are always shut off. The roof-top units may not be used as smoke extractors. COMPLETE UNIT SHUTDOWN AMBIENT IN HIGH PRESSURE AMBIENT IN NEGATIVE PRESSURE Standard in all configurations Only with units in CBK or CCK constructive configuration, thus provided with outdoor air dampers. Only with units in CCK constructive configuration thus provided with extraction fans. If the unit is connected to a supervision system by serial, the fire alarm on free contact is however prioritary. The ventilation stop is immediate. BT09N004GB-08 SMARTPACK 11

12 Advanced heat pump Coils protected against the formation of ice The particular heat pump technology developed for CLIVET PACK guarantees its continuous and reliable operation. The ICE PROTECTION SYSTEM device prevents icing on the base of the external exchanger during winter operation, thanks to a special subcooling circuit. This prevents damages caused by freezing. Smart management of defrosts The automatic defrosting cycles on surfaces of the external exchanger are managed by SMARTPACK in a predictive manner, which reduces both the frequency and the duration. The on-board electronic regulation analyses not only the external conditions but also the changes of the evaporating pressure in the exchanger. The standard defrosting cycle management involves the stop of the ventilation. This reduces the time required for defrosting and prevents the introduction of too cold air in the served area, maintaining comfortable conditions for the users. 12 SMARTPACK BT09N004GB-08

13 Efficient and reliable air conditioner also in severe climates High efficiency heating solutions The reversible heat pump version of SMARTPACK is also able to operate with particularly severe outdoor temperatures. In many areas these conditions only occur for short periods effective use of the system. The use of electric heaters (I) makes it possible to maintain the advantages of the packaged solution, both in terms of design simplicity and installation rationality. The electric heaters can turn on automatically as auxiliary elements to preheat the external air before being treated by the heat pump. Alternatively, the optional hot water coil (II) extends the operating range of the units in even colder climates. It also integrates the heating capacity by preheating the external air before being treated by the heat pump. It can also take automatically the function of main heating source below an outdoor temperature selected by the user. This can be done, for example, after evaluating the costs associated with the energy sources in the specific cases. The hot water coil is activated automatically in emergency mode in the case of a heat pump failure. The other available solution is the fuel-operated heating module (III). This is the solution often used in very cold climates. Like the water coil, it serves as a thermal integration on the heat pump s operating range. It can automatically become the only heat source below an outdoor temperature value chosen by the user and is automatically activated in emergency mode. Unlike systems powered with a central heating plant, it does not require the distribution of hot water outside the building: this simplifies the system, eliminates pumping costs and means there is no need to use antifreeze devices and controls. The Electric panel antifreeze protection option is necessary in very cold climates. BT09N004GB-08 SMARTPACK 13

14 Fuel-operated heating modules The following kinds of modules are available with different heating capacities: gas-operated condensation module with modulating control: extremely efficient solution that, thanks to the condensation and accurate control, always allows for top comfort levels. It is the best choice for the overall cost reduction throughout the lifespan of the system gas heating module with 2-stage control: both an efficient and cost-effective solution for its low initial investment costs. Criteria to determine the size of the fuel-operated heat generator The heating capacity that needs to be installed is determined based on the conditions the unit will work under, such as the outdoor air temperature, internal loads and losses of the building. The size of the heat generator is based on one of the modes below: hybrid, as an integration for the heat pump to maintain the heating capacity supplied as the outdoor temperature drops. bivalent, to fully replace the heat pump when the outdoor temperature drops below the operating limits or the latter is not available. In hybrid mode, the heating capacity required is met by the heat pump and the additional resource, whose capacity may be smaller than the capacity provided by the heat pump. In bivalent mode, as well as serving as an additional resource, the thermal resource must fully replace the heat pump. Therefore, the chosen heating capacity must be higher or identical to the one provided by the heat pump.. The unit logic manages the operation of the thermal resource by giving priority to the heat pump, which also carries out the exhaust air thermodynamic recovery whenever required (configuration with exhaust air energy recovery). The load that needs to be met increases as the outdoor temperature drops. Ex: CKN-XHE 131 condensing gas heating with mudulating control 35 kw (hybrid function) condensing gas heating with mudulating control 54 kw (bivalent function) 1. Bivalent function 2. Hybrid function 3. Heat pump 4. Thermal load line 14 SMARTPACK BT09N004GB-08

15 Sandwich panels with improved thermal insulation and accessibility The use of sandwich panels reduces the thermal dispersions and then the energy consumptions. The panels have dual walls in steel sheet metal with polyurethane insulation and feature seal gaskets along the diameter. The door used to access to the air handling area, manufactured with this technology, is moreover characterized with seal gaskets, handles, for a safe use, and adjustable locks, simplifying the access to the unit for the maintenance. Additional benefits of units with extraction and exhaust system Units equipped with an extraction and exhaust section (Clivet reference CCK) have unique advantages that make SMARTPACK the ideal tool for maximizing energy savings. FREE-COOLING As soon as the external conditions allow it, the unit is capable of automatically activating the FREE-COOLING mode, which, keeping the compressors off and drawing in suitably filtered fresh air allows to cool the served room.. This operating mode is especially useful in spring and autumn or in case of high ambient loads. It allows substantial reduction of the unit energy consumption and compressors. Active energy recovery of expelled air The energy contained in the exhaust air is recovered by forcing the airflow to pass through the external packaged finned heat exchanger. This makes it possible to reduce the electrical energy absorbed by the compressors, to increase the overall efficiency of the unit and to extend its operating ranges. This thermodynamic recovery system does not increase electrical energy consumption for ventilation, as instead happens for recovery with crossed or rotating flows. Greater use of electricity, caused by the enormous pressure drops on the air side in recovery systems with crossed or rotating flows, often nullifies the amount of energy recovered and even exceeds it in some cases. When operating in heat pump mode, the exhaustion of pre-treated air on the external exchanger reduces the possibility of ice formation and consequently the number of defrosting cycles thanks to the external and hot exhaust air mix. The result is a smoother continuous operation and overall unit efficiency improvement. Device for ambient pressure adjustment The ambient pressure control device, which compares the intake air pressure with the external air pressure, detects if the pressure is too high, too low or if it is balanced whether the served room is in over-pression or under-pression conditions. During the fresh air phase, operating on the fresh air damper, the unit can compensate the pressures and keep the ambient at the desired pressure. The pressure is regulated basing on the unit settings defined at the start-up. BT09N004GB-08 SMARTPACK 15

16 High efficiency ventilation with electronically controlled fans How to improve ventilation whilst reducing prime (electric) energy consumption A significant portion of the running costs of the fresh air systems is due to the consumption for ventilation. To this there should be added the charge for the study of the correct operating conditions, and for the required long and precise calibrations at the worksite. The SMARTPAK ventilation technique allows both of these operational costs to be greatly minimised. Versatility of reversed blades rotor This particular type of rotor offers a wider field of operation compared with a traditional forward curved blade fan. When necessary, this can supply high static pressures simply by varying the number of revolutions. The accurate balancing and the self-lubricating bearings ensure its rotating stability over time. The efficiency of the electronic controlled motor The external rotor electric motor is driven by the continuous magnetic switching of the stator. The advantages are: The lack of brushes and the particular power supply increase efficiency by 70%; Even the life cycle increases, thanks to the elimination of the brushes natural abrasive erosion effects; The electronic control also includes a soft start solution, which drastically reduces the starting current of the fan and limits even more the system s electrical commitment. Advantages of direct coupling (plug fan) The motor s rotation is transmitted directly to the rotor, without the use of transmissions (belts and pulleys): the transmissions inefficiencies are eliminated; the transmissions wear and maintenance is eliminated. Efficiency of the ventilation system increases by 30% The comprehensive ventilation system, made up of rotor and motor, is therefore very versatile and efficient. Consumption is 30% lower than a ventilation system of the same capacity used by traditional units available on the market. The right airflow for every type of system Electrical power absorbed by electric motor, data constructor - Example, referred to flow of m3/h with 500 Pa external static pressure. By controlling the fan speed, the airflow rate can be varied and the static pressure capacity can be adapted to the system pressure drop, making the unit start-up particularly simple. The setting or modification of the transmission is no longer required as the ventilation system will adapt itself to the system. The possibility to modify the fan start-up ramp makes this unit suitable for most applications with textile air distribution ducting. High efficiency and low sound emission external fans The external axial fans are equipped with the innovative Winglet airfoil-vane with integrated baffle, able to increase the aerodynamic efficiency. It results in a consumption reduction of the 10% and a medium sound emission lower of 6 db than the traditional fans. 16 SMARTPACK BT09N004GB-08

17 High air filtration efficiency Air quality always under control Air filtering is an essential function for ensure proper well-being and hygiene conditions are maintained in the areas served. This is why it is subject to special regulations based on specific applications. The units are fitted as standard with large G4 filters with low pressure drops on the treatment area. How to increase the filtration efficiency whilst minimising its operational costs High efficiency filters (F7 category) of a traditional system increase the energy spent on ventilation, because of greater loss of pressure. These also require more frequent maintenance, with a significant cost at the end of each year to replace the filters. The electronic filters available for SMARTPAK make outdoor air filtering even more efficient and at the same time they reduce costs for ventilation and maintenance compared with traditional systems. Very high filtration efficiency The efficiency of electronic filters on SMARTPACK is equivalent to classification H10 used in traditional filters, that is the category indicated as absolute filter. These are effective even against smoke, fine dust, particulates PM10, PM2,5, PM1, bacteria, germs and viruses. The ventilation energy is reduced The highest filtration efficiency is obtained with practically no pressure drops. This depends on the metal pre-filter that is found upstream of the plate and withholds the coarse particles, distributes the airflow and contributes to the containment of the magnetic field generated during operation. Return on investment (roi)achieved in second year of operation The reduction of ventilation consumption is the first item of saving for electronic filters. Savings on maintenance are even more evident, because electronic filters are washable and do not need to be replaced at regularly as traditional filters. Taking as reference the price of a standard unit, the total yearly running cost is reduced from over 20% for the version with traditional-bag filters to less than 8% thanks to the electronic filters. The deriving payback is usually less than one and a half years. BT09N004GB-08 SMARTPACK 17

18 Unit technical features VERSION AT CONSTANT AND VARIABLE CAPACITY Compressor Hermetic orbiting scroll compressor complete with motor over-temperature and over-current devices and protection against excessive gas discharge temperature. Fitted on rubber antivibration mounts and complete with oil charge. The oil heater is automatically activated to prevent the oil from being diluted by the refrigerant when the compressor stops. Structure The support base is assembled with a painted galvanized steel frame. The internal structure is made of ALUZINK bent galvanized steel. The alloy that protects the Aluzink allow an excellent corrosion proofing thanks to the galvanic protection typical of the combination aluminium-zinc. Panelling Panels of the compressor panel in steel sheet metal, painted using polyester powders, colour RAL 9001 and covered on the inside with ashlared soundabsorbent material. Sandwich panels in the air treatment section with dual walls in steel sheet metal with polyurethane insulation (40 kg/m3), thickness of outer sheet metal 6/10 mm galvanized and painted using polyester powders colour RAL 9001, polyurethane thickness 30mm with thermal conductivity coefficient 0.022W/ mk, thickness of internal sheet metal 5/10 mm hot galvanized. The panel is also provided with a PVC profile for thermal insulation and a EPDM rubber gasket that ensures the hermetic seal. All panelling can easily be removed to allow complete accessibility to internal components. Internal exchanger Direct expansion finned coil exchanger made with copper pipes placed on staggered rows mechanically expanded to better adhere to the fin collar. The fins are made from aluminium with a corrugated surface and adequately distanced to ensure the maximum heat exchange efficiency. External exchanger Direct expansion finned coil exchanger made with copper pipes placed on staggered rows mechanically expanded to better adhere to the fin collar. The fins are made from aluminium with a corrugated surface and adequately distanced to ensure the maximum heat exchange efficiency. A correct power supply to the expansion valve is ensured by the subcooling circuit; this circuit also prevents the formation of ice at the base of the heat exchanger during winter operation. Fan Internal section Plug fans without scroll with reverse blades driven by electronically-controlled brushless dc motors with direct coupling. No transmission sizing is needed. External section Helical fans with shaped aluminium blades coupled directly to a three phase electric motor with thermal protection incorporated in version IP 54. Housed in aerodynamically shaped nozzles to increase efficiency and minimise noise levels. They are fitted with protective safety guard grilles. Refrigeration circuit Refrigeration circuit with: refrigerant charge sight glass with moisture and liquid indicator high pressure safety pressure switch low pressure safety switch filter dryer electronic expansion valve non-return valve 4-way reverse cycle valve liquid receiver liquid separator high pressure safety valve low pressure safety valve 18 SMARTPACK BT09N004GB-08

19 Filtration Pleated filter for greater filtering surface, made of a galvanized sheet frame with a galvanized and electric-welded protective mesh, and regenerable filtering media made from polyester fibre sized with synthetic resins. G4 efficiency according to CEN-EN 779 standard (Eurovent classification EU4/5 - separation average 90.1% ASHRAE Atm). Self-extinguishing type (flame resistant class 1 - DIN 53438). Tray Internal section Condense collection tray made of 1050 H24 aluminium alloy with anti-condensation insulation, welded and equipped with siphon drain tube. External section Drain pan made of thermoformed, equipped with drain sleeves. Electrical panel The electrical panel is positioned inside the units, with access through a swing door that is opened by a special key. The capacity section includes: main door lock isolator switch compressor circuit breaker compressor power supply remote control switch fan motor thermal protections of internal and external section circuit breaker to protect auxiliary circuit The microprocessor control section includes: treated air temperature control Switch on and off daily and weekly programmer and set point compressor overload protection and timer failure self-diagnosis system potential free contacts for remote ON-OFF, cumulative alarm, fire alarm inlet, fan status, compressor status, summer/winter mode Wall room electronic control including: intuitive graphical interface retro lighted temperature and humidity measurement through its internal probes modification of the temperature and humidity set point unit On/Off and overload reset manual changing of the operating mode (hot or cold) setting of ventilation only operation display of operating status display of alarms and failure code management of the operating parameters. Variable capacity version This has the same technical specifications as with the constant capacity version, plus: For sizes between 41 and 71 -> Hermetic orbiting spiral DigitalScroll compressor complete with motor protection against over temperatures, over currents and against excessive outlet gas temperatures. It is installed on antivibration rubbers and comes complete with an oil charge. The oil heater is automatically activated to prevent the oil from being diluted by the refrigerant when the compressor stops. For sizes between 91 and 151 -> Hermetic Scroll compressors parallel connected (TANDEM) on a single cooling circuit have two-phased oil balancing and are provided with shut-off valves. Complete with motor protection against over temperatures, over currents and against excessive outlet gas temperatures. They are installed on antivibration rubbers and come complete with an oil charge. The oil heater is automatically activated to prevent the oil from being diluted by the refrigerant when the compressor stops. Configuration with extraction and exhaust (CCK) Technical features as the standard version, except: exhaust fan Plug fans without scroll with reverse blades driven by electronically-controlled brushless dc motors with direct coupling. No transmission sizing is needed. BT09N004GB-08 SMARTPACK 19

20 Accessories Unit at variable capacity 2 rows hot water coil Modulating three-way valve Hot gas re-heat coil Immersed electrodes steam humidifier Electric heaters Outdoor air motorized on/off damper (only for CBK configuration) Modulating motorized outdoor air damper (only for CBK configuration) Heating gas module Air quality sensor for CO2 p.p.m. control Air quality sensor for CO2 and VOC p.p.m. control Electronic filters Differential pressure switch for dirty air filters Serial port RS485 with Modbus protocol LonWorks serial communication module Temperature control with on-board probe Temperature and humidity ambient control by on board probes Constant supply airflow-rate Variable airflow (only for version at variable capacity) Phase monitor Power factor correction capacitors (cosfi > 0.95) Electrical panel anti-freeze protection Enthalpic FREE-COOLING (only for CCK configuration) Device for reducing consumption of the outdoor section variable speed fans (phase-cut) High and low pressure gauges Finned coil protection grill Spring antivibration mounts (accessory separately supplied) Clivet Master System (accessory separately supplied) All the handling coils can be covered with aluminium - Fin Guard - copper/copper Test Unit manufactured to ISO 9001 standard and commissioned upon production completion. 20 SMARTPACK BT09N004GB-08

21 Version: unit at constant capacity (Clivet abbreviation SHC) General technical data Standard airflow Size Cooling Cooling capacity 1 kw Sensible capacity 1 kw Compressor power input 1 kw EER Heating Heating capacity 2 kw Compressor power input 2 kw COP Compressor Type of compressors 3 Scroll Scroll Scroll Scroll Scroll Scroll Scroll Scroll No. of compressors No Std Capacity control steps No Refrigerant charge (C1) kg Refrigeration circuits No Air Handling Section Fans (Supply) Type of supply fan 4 RAD RAD RAD RAD RAD RAD RAD RAD Number of supply fans No Fan diameter mm Type of motor 5 CC CC CC CC CC CC CC CC Supply airflow l/s Supply airflow m 3 /h Installed unit power kw Max. static pressure supply fan 6 Pa Fans (Exhaust) Type of exhaust fan 7 RAD RAD RAD RAD RAD RAD RAD RAD Number of exhaust fans 7 No Fan diameter 7 mm Type of motor 7 CC CC CC CC CC CC CC CC Installed unit power 7 kw External Section Fans Type of fans 8 AX AX AX AX AX AX AX AX Number of fans No Fan diameter mm Fan RPM rpm Standard airflow l/s Installed unit power kw Power supply Standard power supply V 400/3~/50 400/3~/50 400/3~/50 400/3~/50 400/3~/50 400/3~/50 400/3~/50 400/3~/50 Performance data are referred to operation with 30% of fresh air intake and same amount of air exhaust. (configuration CCK) 1. Ambient air at 27 C/19 C W.B.. external exchanger entering air temperature 35 C. EER referred only to compressors 2. Ambient air 20 C D.B. Outdoor air 7 C D.B./6 C W.B.. COP referred only to compressors 3. SCROLL = scroll compressor 4. RAD = radial fan 5. EC Electronic switching motor 6. Net outside static pressure to win the outlet and intake onboard pressure drops 7. Configuration for fresh air supply with exhaust and extraction 8. AX = axial fan BT09N004GB-08 SMARTPACK 21

22 Electrical data Full re-circulation (CAK) / Recirculation and renewal air (CBK) Size F.L.A. - Full load current at max admissible conditions F.L.A. - Compressor 1 A F.L.A. - Compressor 2 A F.L.A. - Single External Fan A F.L.A. - Single supply fan A F.L.A. - Total 1 A L.R.A. - Locked rotor amperes L.R.A. - Compressor 1 A L.R.A. - Compressor 2 A F.L.I. - Full load power input at max admissible conditions F.L.I. - Compressor 1 kw F.L.I. - Compressor 2 kw F.L.I. - Single External Fan kw F.L.I. - Single supply fan kw F.L.I. - Total 2 kw M.I.C. Maximum inrush current M.I.C. - Value A Data refer to standard units. power supply: 400/3/50 Hz +/-6% Voltage unbalance: max 2 % Configuration: recirculation, renewal and exhaust air (CCK) 1. Values not including the accessories. To obtain the value of F.L.A. including accessories, add to the total F.L.A. value that of any accessories (see electrical data of accessories) 2. Values not including the accessories. To obtain the value of F.L.I. including accessories, add to the total F.L.I. value that of any accessories (see electrical data of accessories) Size F.L.A. - Full load current at max admissible conditions F.L.A. - Compressor 1 A F.L.A. - Compressor 2 A F.L.A. - Single External Fan A F.L.A. - Single supply fan A F.L.A. - Single exhaust air fan A F.L.A. - Total 1 A L.R.A. - Locked rotor amperes L.R.A. - Compressor 1 A L.R.A. - Compressor 2 A F.L.I. - Full load power input at max admissible conditions F.L.I. - Compressor 1 kw F.L.I. - Compressor 2 kw F.L.I. - Single External Fan kw F.L.I. - Single supply fan kw F.L.I. Single exhaust air fan kw F.L.I. - Total 2 kw M.I.C. Maximum inrush current M.I.C. - Value A Data refer to standard units. Power supply: 400/3/50 Hz +/-6% Voltage unbalance: max 2 % 1. Values not including the accessories. To obtain the value of F.L.A. including accessories, add to the total F.L.A. value that of any accessories (see electrical data of accessories) 2. Values not including the accessories. To obtain the value of F.L.I. including accessories, add to the total F.L.I. value that of any accessories (see electrical data of accessories) 22 SMARTPACK BT09N004GB-08

23 Electrical input of optional components To obtain the electrical input of the unit including accessories, add the standard data in Electrical Data table to those for the selected accessories. SIZES F.L.A. ABSORBED CURRENT F.L.A. EH09-4,5 kw electric elements A F.L.A. EH10-6 kw electric elements A F.L.A. EH12-9 kw electric elements A F.L.A. EH14-12 kw electric elements A F.L.A. EH17-18 kw electric elements A F.L.A. EH20-24 kw electric elements A F.L.A. HSE3 - Immersed electrodes steam humidifier of 3 kg/h A F.L.A. HSE5 - Immersed electrodes steam humidifier of 5 kg/h A F.L.A. HSE8 - Immersed electrodes steam humidifier of 8 kg/h A F.L.A. FES - Electronic filters A F.L.A. AGQ - Electrical panel anti-freeze protection A F.L.I. POWER INPUT F.L.I. EH09 - Electric elements of 4,5 kw kw F.L.I. EH10 - Electric elements of 6 kw kw F.L.I. EH12 - Electric elements of 9 kw kw F.L.I. EH14 - Electric elements of 12 kw kw F.L.I. EH17 - Electric elements of 18 kw kw F.L.I. EH20 - Electric elements of 24 kw kw F.L.I. HSE3 - Immersed electrodes steam humidifier of 3 kg/h kw F.L.I. HSE5 - Immersed electrodes steam humidifier of 5 kg/h kw F.L.I. HSE8 - Immersed electrodes steam humidifier of 8 kg/h kw F.L.I. FES - Electronic filters kw F.L.I. AGQ - Electrical panel anti-freeze protection kw The FES - Electronic filters option doesn t imply any change of the unit standard electrical data. Sound levels Sound power level (db) Sound Sound Size Octave band (Hz) power level pressure level db(a) db(a) The sound levels are referred to unit operating at full load in nominal conditions. The sound pressure level is referred at a distance of 1 m. from the ducted unit surface operating in free field conditions. External static pressure 50 Pa. (standard UNI EN ISO ) Please note that when the unit is installed in conditions different from nominal test conditions (e.g. near walls or obstacles in general), the sound levels may undergo substantial variations. BT09N004GB-08 SMARTPACK 23

24 Standard airflow SIZES Airflow l/s Airflow m³/h Max external static pressure Pa Performance in cooling (Standard airflow) Size Ta ( C) DB/ WB OUTDOOR AIR TEMPERATURE C D.B. (RELATIVE HUMIDITY AT 50%) kwf kwe kws EER kwf kwe kws EER kwf kwe kws EER kwf kwe kws EER kwf kwe kws EER kwf kwe kws EER 22 / 16 12,1 1,9 9,7 6,25 12,1 2,2 9,4 5,56 12,0 2,4 9,2 4,97 12,1 2,7 8,9 4,47 12,1 3,0 8,6 4,05 12,2 3,2 8,4 3,75 24 / 17 12,2 2,0 10,4 6,23 12,3 2,2 10,2 5,58 12,3 2,4 10,0 5,00 12,2 2,7 9,7 4,49 12,2 3,0 9,5 4,04 12,2 3,3 9,3 3,72 26 / 18 12,4 2,0 11,2 6,27 12,5 2,2 10,9 5,63 12,5 2,5 10,7 5,05 12,4 2,7 10,5 4,53 12,4 3,1 10,2 4,06 12,3 3,3 10,0 3,71 27 / 19 12,7 2,0 11,1 6,35 12,7 2,2 10,9 5,71 12,7 2,5 10,6 5,12 12,7 2,8 10,4 4,57 12,6 3,1 10,2 4, / 20 13,0 2,0 11,1 6,48 13,0 2,2 10,8 5,81 13,0 2,5 10,6 5,19 12,9 2,8 10,3 4, / 22 13,8 2,0 10,9 6,90 13,7 2,2 10,6 6,10 13,5 2,5 10,3 5,40 13,4 2,8 10,0 4, / 16 14,6 2,8 11,7 5,23 14,7 3,1 11,4 4,69 14,8 3,5 11,1 4,23 14,9 3,9 10,7 3,85 14,9 4,2 10,4 3,51 14,9 4,6 10,1 3,28 24 / 17 14,9 2,8 12,5 5,27 15,0 3,2 12,1 4,72 15,1 3,5 11,8 4,25 15,1 3,9 11,5 3,86 15,1 4,3 11,1 3,51 15,0 4,6 10,8 3,27 26 / 18 15,2 2,9 13,2 5,31 15,3 3,2 12,8 4,75 15,3 3,6 12,5 4,28 15,3 3,9 12,1 3,87 15,2 4,3 11,8 3,53 15,2 4,6 11,5 3,28 27 / 19 15,5 2,9 13,0 5,33 15,5 3,3 12,7 4,77 15,5 3,6 12,4 4,30 15,5 4,0 12,0 3,90 15,4 4,3 11,7 3,56 15,4 4,6 11,4 3,32 28 / 20 15,8 3,0 12,9 5,35 15,7 3,3 12,6 4,79 15,7 3,6 12,3 4,32 15,7 4,0 12,0 3,93 15,7 4,4 11,7 3, / 22 16,4 3,1 12,9 5,36 16,1 3,4 12,6 4,81 16,0 3,7 12,4 4,37 16,1 4,0 12,1 4,02 16,3 4,4 11,9 3, / 16 20,1 3,3 15,7 6,09 20,2 3,7 15,3 5,46 20,3 4,1 14,9 4,93 20,4 4,5 14,5 4,48 20,5 5,0 14,1 4,09 20,6 5,4 13,8 3,82 24 / 17 20,5 3,3 16,8 6,13 20,5 3,7 16,4 5,49 20,6 4,2 16,0 4,95 20,7 4,6 15,6 4,50 20,8 5,0 15,3 4,13 21,0 5,4 15,0 3,87 26 / 18 20,9 3,4 17,9 6,19 20,9 3,8 17,5 5,53 20,9 4,2 17,1 4,99 21,0 4,6 16,8 4,54 21,1 5,1 16,4 4,16 21,3 5,5 16,1 3,90 27 / 19 21,3 3,4 17,8 6,25 21,3 3,8 17,4 5,59 21,3 4,2 17,1 5,04 21,4 4,7 16,7 4,58 21,5 5,1 16,3 4,19 21,6 5,5 16,1 3,91 28 / 20 21,8 3,4 17,7 6,33 21,8 3,8 17,3 5,67 21,7 4,3 16,9 5,11 21,7 4,7 16,5 4,63 21,7 5,2 16,2 4,21 21,8 5,6 15,9 3,92 30 / 22 22,7 3,5 17,1 6,53 22,8 3,9 16,7 5,90 22,7 4,3 16,2 5,31 22,6 4,7 15,8 4,76 22,3 5,2 15,3 4, / 16 22,3 4,0 17,8 5,63 22,3 4,4 17,4 5,03 22,4 4,9 16,9 4,57 22,8 5,4 16,4 4,20 23,3 5,9 15,9 3,92 23,8 6,4 15,6 3,73 24 / 17 22,9 4,0 18,8 5,75 22,9 4,4 18,4 5,16 23,0 4,9 17,9 4,66 23,2 5,5 17,4 4,24 23,4 6,0 17,0 3,88 23,6 6,5 16,6 3,64 26 / 18 23,4 4,0 19,7 5,85 23,5 4,5 19,3 5,25 23,5 5,0 18,8 4,73 23,6 5,5 18,3 4,27 23,6 6,1 17,9 3,87 23,6 6,6 17,5 3,58 27 / 19 24,0 4,0 19,5 5,92 24,0 4,5 19,1 5,33 24,0 5,0 18,6 4,79 24,0 5,6 18,2 4,31 23,9 6,2 17,7 3,87 23,7 6,7 17,4 3,56 28 / 20 24,4 4,1 19,5 5,97 24,5 4,6 19,0 5,38 24,5 5,1 18,6 4,83 24,4 5,6 18,1 4,34 24,2 6,2 17,7 3, / 22 25,4 4,2 19,9 6,00 25,3 4,7 19,5 5,40 25,3 5,2 19,1 4,87 25,2 5,7 18,7 4,41 25,1 6,3 18,3 4, / 16 28,5 4,9 22,6 5,81 28,5 5,4 22,0 5,24 28,6 6,0 21,4 4,75 28,8 6,7 20,8 4,33 29,1 7,3 20,2 3,97 29,4 7,9 19,7 3,72 24 / 17 29,0 5,0 24,1 5,86 29,0 5,5 23,5 5,29 29,1 6,1 23,0 4,79 29,3 6,7 22,4 4,36 29,6 7,4 21,8 3,99 29,9 8,0 21,4 3,72 26 / 18 29,6 5,0 25,6 5,90 29,5 5,5 25,0 5,34 29,6 6,1 24,5 4,83 29,8 6,8 23,9 4,39 30,1 7,5 23,4 4,01 30,5 8,2 22,9 3,74 27 / 19 30,2 5,1 25,4 5,96 30,1 5,6 24,9 5,39 30,1 6,2 24,3 4,88 30,3 6,8 23,8 4,42 30,6 7,6 23,2 4,03 31,0 8,3 22,8 3,75 28 / 20 30,9 5,1 25,2 6,01 30,7 5,6 24,7 5,44 30,7 6,2 24,1 4,92 30,8 6,9 23,6 4,46 31,1 7,7 23,1 4,05 31,5 8,4 22,6 3,76 30 / 22 32,1 5,2 24,7 6,14 31,9 5,8 24,2 5,55 31,8 6,4 23,7 5,01 31,9 7,1 23,1 4,52 32,2 7,8 22,6 4,10 32,5 8,5 22,2 3,80 22 / 16 32,6 6,0 25,8 5,40 32,7 6,7 25,1 4,91 32,7 7,4 24,4 4,45 32,8 8,1 23,7 4,02 32,8 9,0 23,0 3,63 32,8 9,8 22,4 3,35 24 / 17 33,1 6,1 27,4 5,46 33,2 6,7 26,7 4,96 33,2 7,4 25,9 4,49 33,2 8,2 25,2 4,06 33,2 9,0 24,5 3,67 33,1 9,8 23,9 3,38 26 / 18 33,7 6,1 28,8 5,52 33,7 6,7 28,1 5,01 33,8 7,4 27,4 4,53 33,7 8,2 26,7 4,10 33,6 9,1 25,9 3,70 33,4 9,8 25,4 3,41 27 / 19 34,3 6,1 28,7 5,58 34,3 6,8 27,9 5,06 34,3 7,5 27,2 4,57 34,2 8,3 26,5 4,13 34,0 9,1 25,8 3,73 33,8 9,8 25,2 3,43 28 / 20 34,9 6,2 28,6 5,64 34,9 6,8 27,9 5,10 34,9 7,6 27,2 4,61 34,7 8,3 26,5 4,16 34,5 9,2 25,8 3,76 34,2 9,9 25,2 3,46 30 / 22 36,3 6,3 29,4 5,75 36,3 7,0 28,7 5,19 36,1 7,7 28,0 4,68 35,9 8,5 27,4 4,23 35,6 9,3 26,7 3,82 35,3 10,0 26,2 3,52 22 / 16 42,1 7,3 33,8 5,81 42,5 8,0 33,1 5,33 42,9 8,8 32,3 4,87 43,2 9,7 31,5 4,45 43,6 10,7 30,7 4,07 43,9 11,6 30,1 3,79 24 / 17 43,0 7,3 36,0 5,90 43,4 8,0 35,2 5,39 43,7 8,9 34,5 4,92 44,0 9,8 33,8 4,49 44,3 10,8 33,0 4,09 44,5 11,7 32,5 3,80 26 / 18 43,9 7,4 37,9 5,96 44,2 8,1 37,2 5,45 44,5 9,0 36,5 4,97 44,8 9,9 35,8 4,52 45,0 10,9 35,1 4,12 45,2 11,8 34,6 3,82 27 / 19 44,8 7,5 37,6 6,01 45,1 8,2 37,0 5,50 45,3 9,0 36,3 5,01 45,6 10,0 35,6 4,56 45,8 11,0 34,9 4,15 45,9 11,9 34,4 3,85 28 / 20 45,7 7,6 37,6 6,03 45,9 8,3 36,9 5,53 46,1 9,1 36,2 5,05 46,3 10,1 35,5 4,61 46,6 11,1 34,8 4,19 46,8 12,0 34,2 3,89 30 / 22 47,4 7,9 38,4 6,01 47,5 8,5 37,6 5,58 47,7 9,3 36,8 5,13 47,9 10,2 36,1 4,70 48,3 11,2 35,3 4, / 16 48,6 8,6 38,7 5,62 49,0 9,5 37,8 5,13 49,3 10,5 36,9 4,68 49,6 11,6 36,0 4,27 49,8 12,8 35,1 3,90 50,0 13,8 34,4 3,63 24 / 17 49,6 8,7 41,3 5,67 50,0 9,7 40,4 5,18 50,3 10,6 39,6 4,72 50,5 11,7 38,8 4,30 50,6 12,9 37,9 3,92 50,5 13,9 37,2 3,63 26 / 18 50,6 8,8 44,0 5,72 51,0 9,7 43,2 5,24 51,3 10,7 42,3 4,77 51,4 11,8 41,5 4,34 51,3 13,0 40,7 3,94 51,1 14,0 40,1 3,64 27 / 19 51,6 8,9 43,8 5,78 52,1 9,8 43,0 5,29 52,3 10,8 42,2 4,82 52,3 11,9 41,4 4,38 52,1 13,1 40,6 3,97 51,7 14,1 39,9 3,67 28 / 20 52,7 9,0 43,5 5,84 53,1 9,9 42,7 5,34 53,3 10,9 41,9 4,87 53,2 12,0 41,1 4,43 52,9 13,2 40,3 4,01 52,4 14,2 39,6 3,70 30 / 22 54,8 9,2 42,4 5,97 55,1 10,1 41,5 5,45 55,2 11,1 40,6 4,97 55,0 12,2 39,8 4,53 54,6 13,3 38,9 4,11 54,1 14,2 38,2 3,81 Performance data are referred to operation with 30% of fresh air intake and same amount of air exhaust. (configuration CCK) EER referred only to compressors Ta = Indoor air temperature D.B/W.B DB = dry bulb WB = wet bulb kwf = Cooling capacity in kw kwe = Compressor power input in kw kws = sensible cooling capacity (kw) Not all cooling yields take into account the heat dissipated by the fan motors 24 SMARTPACK BT09N004GB-08

25 Integrated heating capacities Air temperature external exchanger inlet C (D.B. / W.B.) -5 / / / 3.9 Others Heating capacity multiplication coefficient 0,89 0,88 0,94 1 The integrated heating capacity represents the real heating capacity considering the defrost cycles too. To obtain the integrated heating capacity multiply the heating performance value in kwt (shown in the heating performance tables) by the coefficients indicated in the table. DB = dry bulb WB = wet bulb In case of below zero external air temperature with a long period of heat pump operating mode it is necessary to help the evacuation of the water produced during the defrost cycle; this to avoid the formation of ice in the unit basement. Pay attention that the evacuation will not create inconveniences to things or persons. Standard airflow SIZES Airflow l/s Airflow m³/h Max external static pressure Pa Performance in Heating SIZES OUTDOOR AIR TEMPERATURE ( C) D.B./W.B. Ta ( C) DB -7 / -8-5 / -6 0 / -1 2 / 1 7 / 6 12 / 11 kwt kwe COP kwt kwe COP kwt kwe COP kwt kwe COP kwt kwe COP kwt kwe COP ,3 1,5 6,38 10,4 1,5 6,77 10,8 1,6 6,92 12,2 1,7 7,24 13,7 1,8 7, ,1 1,5 5,94 9,5 1,6 6,05 10,5 1,7 6,31 10,9 1,7 6,42 12,2 1,8 6,65 13,6 2,0 6, ,2 1,6 5,73 9,5 1,6 5,82 10,5 1,7 6,04 11,0 1,8 6,13 12,2 1,9 6,32 13,6 2,1 6, ,2 1,6 5,58 9,5 1,7 5,66 10,6 1,8 5,87 11,0 1,9 5,94 12,2 2,0 6,12 13,6 2,2 6, ,2 1,7 5,50 9,5 1,7 5,58 10,6 1,8 5,78 11,0 1,9 5,85 12,2 2,0 6,02 13,6 2,2 6, ,1 1,8 5,17 9,5 1,8 5,25 10,6 2,0 5,43 11,1 2,0 5,50 12,3 2,2 5,64 13,6 2,4 5, ,2 2,0 5,66 11,6 2,0 5,81 12,9 2,1 6,15 13,5 2,1 6,27 15,0 2,3 6,53 16,9 2,5 6, ,5 2,1 5,47 11,9 2,1 5,57 13,1 2,3 5,79 13,6 2,3 5,86 15,2 2,5 6,02 16,9 2,8 6, ,6 2,2 5,32 12,0 2,2 5,40 13,2 2,4 5,55 13,8 2,5 5,61 15,2 2,7 5,72 16,9 2,9 5, ,8 2,3 5,21 12,2 2,3 5,27 13,3 2,5 5,40 13,8 2,5 5,44 15,3 2,8 5,53 16,9 3,0 5, ,8 2,3 5,16 12,2 2,3 5,21 13,4 2,5 5,32 13,9 2,6 5,36 15,3 2,8 5,44 16,9 3,1 5, ,1 2,5 4,92 12,5 2,5 4,94 13,5 2,7 5,00 14,0 2,8 5,03 15,4 3,0 5,08 17,0 3,3 5, ,7 2,7 6,50 18,5 2,8 6,60 20,8 3,1 6,80 23,4 3,4 6, ,9 2,7 5,85 17,8 2,9 6,05 18,6 3,0 6,13 20,8 3,3 6,28 23,3 3,6 6, ,3 2,8 5,53 16,0 2,9 5,61 17,9 3,1 5,79 18,7 3,2 5,85 20,9 3,5 5,99 23,3 3,8 6, ,3 2,8 5,37 16,0 2,9 5,45 17,9 3,2 5,62 18,7 3,3 5,68 20,9 3,6 5,80 23,3 3,9 5, ,3 2,9 5,29 16,0 3,0 5,36 17,9 3,2 5,53 18,7 3,4 5,59 20,9 3,7 5,71 23,3 4,0 5, ,2 3,1 4,96 15,9 3,2 5,04 17,9 3,4 5,20 18,8 3,6 5,25 21,0 3,9 5,36 23,3 4,3 5, ,1 3,1 6,57 20,9 3,2 6,63 23,4 3,5 6,75 26,1 3,8 6, ,0 3,0 5,92 20,1 3,3 6,07 21,0 3,4 6,12 23,4 3,8 6,20 26,1 4,2 6, ,4 3,1 5,61 18,1 3,2 5,67 20,2 3,5 5,79 21,1 3,6 5,83 23,5 4,0 5,90 26,1 4,4 5, ,5 3,2 5,46 18,2 3,3 5,51 20,3 3,6 5,61 21,1 3,7 5,65 23,5 4,1 5,71 26,1 4,5 5, ,5 3,3 5,39 18,3 3,4 5,44 20,3 3,7 5,53 21,2 3,8 5,56 23,5 4,2 5,62 26,1 4,6 5, ,0 3,5 5,14 18,7 3,6 5,16 20,6 4,0 5,21 21,4 4,1 5,23 23,7 4,5 5,27 26,2 4,9 5, ,4 4,0 6,38 26,5 4,1 6,53 29,7 4,4 6,80 33,2 4,8 6, ,6 4,0 5,64 25,4 4,3 5,98 26,6 4,4 6,08 29,8 4,7 6,27 33,1 5,2 6, ,6 4,0 5,35 22,7 4,1 5,48 25,6 4,4 5,75 26,8 4,6 5,83 29,8 5,0 5,98 33,1 5,5 6, ,7 4,1 5,26 22,8 4,3 5,37 25,7 4,6 5,59 26,8 4,7 5,66 29,9 5,2 5,80 33,1 5,6 5, ,8 4,2 5,21 22,9 4,3 5,31 25,7 4,7 5,52 26,9 4,8 5,58 29,9 5,2 5,71 33,1 5,7 5, ,4 4,5 5,03 23,4 4,6 5,10 26,0 5,0 5,23 27,1 5,1 5,28 30,1 5,6 5,37 33,1 6,1 5, ,7 4,5 6,34 30,1 4,7 6,45 33,8 5,1 6,66 37,6 5,5 6, ,4 4,5 5,66 26,5 4,6 5,75 29,4 4,9 5,96 30,6 5,1 6,02 34,0 5,5 6,15 37,7 6,0 6, ,9 4,7 5,50 26,9 4,8 5,57 29,7 5,2 5,72 30,9 5,4 5,77 34,1 5,8 5,87 37,8 6,4 5, ,1 4,9 5,37 27,1 5,0 5,43 29,8 5,4 5,56 31,0 5,5 5,60 34,3 6,0 5,69 37,8 6,6 5, ,1 4,9 5,30 27,2 5,1 5,36 29,9 5,5 5,48 31,1 5,6 5,52 34,3 6,1 5,60 37,8 6,7 5, ,1 5,2 4,99 27,2 5,4 5,04 30,1 5,8 5,15 31,4 6,0 5,19 34,5 6,6 5,26 37,9 7,1 5, ,1 5,7 6,48 39,0 5,9 6,60 43,5 6,4 6,81 47,8 6,9 6, ,8 5,8 5,86 37,7 6,2 6,09 39,3 6,4 6,17 43,7 6,9 6,34 48,5 7,5 6, ,0 5,9 5,61 34,3 6,0 5,68 37,9 6,5 5,86 39,6 6,7 5,92 43,9 7,2 6,07 48,8 7,9 6, ,2 6,1 5,48 34,5 6,2 5,55 38,1 6,7 5,70 39,7 6,9 5,76 44,1 7,5 5,90 49,0 8,1 6, ,3 6,1 5,41 34,6 6,3 5,48 38,2 6,8 5,63 39,8 7,0 5,69 44,1 7,6 5,82 49,0 8,3 5, ,1 6,5 5,10 34,5 6,7 5,17 38,4 7,2 5,33 40,1 7,4 5,39 44,4 8,1 5,51 49,1 8,8 5,60 BT09N004GB-08 SMARTPACK 25

26 SIZES 151 Ta ( C) DB OUTDOOR AIR TEMPERATURE ( C) D.B./W.B. -7 / -8-5 / -6 0 / -1 2 / 1 7 / 6 12 / 11 kwt kwe COP kwt kwe COP kwt kwe COP kwt kwe COP kwt kwe COP kwt kwe COP ,3 6,9 6,27 45,3 7,1 6,38 50,8 7,7 6,60 57,1 8,4 6, ,8 6,9 5,61 43,5 7,4 5,88 45,6 7,6 5,97 50,9 8,3 6,16 56,7 9,0 6, ,3 7,0 5,30 39,1 7,2 5,42 43,8 7,7 5,66 45,8 8,0 5,74 51,0 8,7 5,90 56,7 9,4 6, ,7 7,3 5,20 39,4 7,4 5,30 44,0 8,0 5,51 45,9 8,2 5,58 51,2 8,9 5,73 56,9 9,7 5, ,0 7,4 5,15 39,6 7,6 5,24 44,1 8,1 5,44 46,0 8,3 5,51 51,2 9,1 5,65 57,0 9,9 5, ,3 7,9 4,98 40,6 8,1 5,04 44,5 8,6 5,17 46,3 8,9 5,22 51,6 9,7 5,34 57,8 10,6 5,44 Performance data are referred to operation with 30% of fresh air intake and same amount of air exhaust. (configuration CCK) COP referred only to compressors Ta = indoor air temperature D.B. (50% of relative humidity) DB = dry bulb WB = wet bulb kwt = Provided heating capacity (kw) with coils free of ice kwe = Compressor power input in kw Not all thermal yields take into account the heat dissipated by the fan motors 26 SMARTPACK BT09N004GB-08

27 Reduced airflow SIZES Airflow l/s Airflow m³/h Max external static pressure Pa Performance in cooling (Reduced airflow) Size Ta ( C) DB/ WB OUTDOOR AIR TEMPERATURE C D.B. (RELATIVE HUMIDITY AT 50%) kwf kwe kws EER kwf kwe kws EER kwf kwe kws EER kwf kwe kws EER kwf kwe kws EER kwf kwe kws EER 24 / 17 11,9 2,0 9,6 6,06 11,9 2,2 9,3 5,49 11,9 2,4 9,1 4,92 11,9 2,7 8,8 4,37 11,9 3,1 8,6 3,87 11,9 3,4 8,4 3,50 26 / 18 12,1 2,0 10,2 6,14 12,1 2,2 9,9 5,51 12,1 2,5 9,7 4,95 12,1 2,7 9,4 4,44 12,2 3,0 9,2 3,99 12,2 3,3 9,0 3,68 27 / 19 12,4 2,0 10,1 6,23 12,3 2,2 9,8 5,55 12,3 2,5 9,6 4,98 12,4 2,7 9,4 4,51 12,4 3,0 9,1 4,10 12,5 3,3 8,9 3,82 28 / 20 12,6 2,0 10,0 6,32 12,6 2,2 9,8 5,60 12,6 2,5 9,5 5,03 12,6 2,8 9,3 4,57 12,7 3,0 9,1 4, / 22 13,2 2,0 9,8 6,50 13,1 2,3 9,5 5,75 13,1 2,5 9,3 5,16 13,1 2,8 9,1 4,68 13,1 3,1 8,8 4, / 24 13,7 2,1 9,4 6,70 13,7 2,3 9,1 5,96 13,6 2,6 8,9 5,32 13,6 2,8 8,7 4, / 17 14,6 2,8 11,4 5,21 14,6 3,2 11,1 4,62 14,6 3,5 10,9 4,14 14,6 3,9 10,6 3,75 14,7 4,3 10,3 3,41 14,8 4,6 10,0 3,19 26 / 18 14,9 2,8 12,1 5,24 14,8 3,2 11,8 4,64 14,8 3,6 11,5 4,15 14,8 3,9 11,2 3,76 14,9 4,3 10,9 3,43 14,9 4,6 10,7 3,21 27 / 19 15,1 2,9 12,0 5,27 15,1 3,2 11,7 4,66 15,1 3,6 11,4 4,17 15,1 4,0 11,2 3,78 15,1 4,4 10,9 3,46 15,1 4,7 10,6 3,24 28 / 20 15,4 2,9 11,9 5,31 15,4 3,3 11,7 4,68 15,4 3,7 11,4 4,20 15,3 4,0 11,1 3,81 15,3 4,4 10,8 3,49 15,3 4,7 10,6 3,28 30 / 22 16,0 3,0 11,8 5,40 16,0 3,4 11,5 4,76 15,9 3,7 11,2 4,28 15,9 4,1 10,9 3,90 15,8 4,4 10,6 3, / 24 16,7 3,0 11,5 5,51 16,6 3,4 11,1 4,86 16,5 3,8 10,8 4,38 16,4 4,1 10,5 4, / 17 19,9 3,3 15,5 6,03 19,8 3,7 15,1 5,38 19,9 4,1 14,7 4,83 20,0 4,6 14,2 4,36 20,2 5,1 13,8 3,97 20,4 5,5 13,5 3,70 26 / 18 20,3 3,3 16,3 6,08 20,3 3,7 15,9 5,46 20,3 4,1 15,5 4,91 20,4 4,6 15,0 4,43 20,5 5,1 14,6 4,02 20,7 5,5 14,3 3,73 27 / 19 20,7 3,4 16,3 6,15 20,7 3,7 15,9 5,53 20,7 4,2 15,4 4,98 20,8 4,6 15,0 4,49 20,9 5,1 14,6 4,06 21,0 5,6 14,2 3,76 28 / 20 21,2 3,4 16,2 6,22 21,2 3,8 15,8 5,61 21,2 4,2 15,4 5,05 21,2 4,7 15,0 4,55 21,2 5,2 14,6 4,11 21,2 5,6 14,3 3,79 30 / 22 22,1 3,5 16,2 6,38 22,1 3,8 15,8 5,76 22,1 4,3 15,4 5,18 22,0 4,7 15,1 4,67 21,9 5,2 14,7 4, / 24 23,0 3,5 16,3 6,56 23,0 3,9 16,0 5,90 23,0 4,3 15,7 5,30 22,8 4,8 15,4 4,76 22,6 5,3 15,1 4, / 17 22,2 3,9 17,5 5,66 22,4 4,4 17,0 5,08 22,5 4,9 16,6 4,57 22,5 5,5 16,2 4,12 22,5 6,1 15,7 3,72 22,5 6,6 15,4 3,43 26 / 18 22,8 4,0 18,4 5,74 22,8 4,4 18,0 5,13 22,8 5,0 17,5 4,60 22,9 5,5 17,1 4,15 22,9 6,1 16,7 3,76 23,0 6,6 16,4 3,48 27 / 19 23,3 4,0 18,3 5,81 23,2 4,5 17,9 5,17 23,2 5,0 17,5 4,64 23,2 5,6 17,1 4,18 23,3 6,1 16,6 3,80 23,4 6,6 16,3 3,54 28 / 20 23,8 4,1 18,3 5,87 23,7 4,5 17,9 5,22 23,6 5,1 17,4 4,67 23,6 5,6 17,0 4,22 23,7 6,2 16,6 3,84 23,9 6,7 16,3 3,58 30 / 22 24,8 4,1 18,3 5,98 24,6 4,6 17,8 5,31 24,5 5,1 17,4 4,76 24,5 5,7 17,0 4,31 24,5 6,3 16,5 3, / 24 25,7 4,2 18,4 6,05 25,6 4,7 18,0 5,41 25,5 5,2 17,5 4,87 25,4 5,8 17,1 4,40 25,4 6,3 16,6 4, / 17 28,2 4,9 22,2 5,77 28,1 5,4 21,6 5,19 28,3 6,0 21,1 4,69 28,5 6,7 20,6 4,26 28,8 7,4 20,1 3,89 29,2 8,0 19,7 3,64 26 / 18 28,8 4,9 23,4 5,85 28,7 5,5 22,9 5,24 28,7 6,1 22,4 4,72 28,9 6,8 21,9 4,28 29,2 7,5 21,4 3,90 29,6 8,1 21,0 3,65 27 / 19 29,5 5,0 23,3 5,92 29,2 5,5 22,9 5,29 29,2 6,1 22,4 4,75 29,3 6,8 21,9 4,30 29,6 7,6 21,4 3,92 30,1 8,2 21,0 3,66 28 / 20 30,1 5,0 23,3 5,99 29,8 5,6 22,8 5,34 29,7 6,2 22,3 4,79 29,8 6,9 21,8 4,33 30,1 7,6 21,3 3,94 30,5 8,3 20,9 3,68 30 / 22 31,3 5,1 23,0 6,10 30,9 5,7 22,4 5,45 30,8 6,3 21,9 4,89 30,9 7,0 21,4 4,41 31,2 7,8 20,9 4,00 31,6 8,5 20,4 3,72 32 / 24 32,5 5,2 22,5 6,20 32,2 5,8 21,8 5,57 32,1 6,4 21,2 5,01 32,1 7,1 20,6 4,51 32,4 7,9 20,0 4,07 32,7 8,7 19,6 3,77 24 / 17 31,9 5,9 25,6 5,41 32,0 6,6 24,9 4,85 32,0 7,3 24,1 4,37 32,1 8,1 23,3 3,95 32,1 9,0 22,5 3,58 32,1 9,7 21,9 3,32 26 / 18 32,5 6,0 27,0 5,46 32,6 6,6 26,2 4,90 32,6 7,4 25,5 4,41 32,6 8,2 24,7 3,99 32,6 9,0 23,9 3,61 32,6 9,7 23,2 3,35 27 / 19 33,2 6,0 26,9 5,51 33,2 6,7 26,1 4,95 33,2 7,5 25,4 4,45 33,2 8,3 24,6 4,02 33,2 9,1 23,8 3,64 33,1 9,8 23,2 3,37 28 / 20 33,8 6,1 26,7 5,57 33,9 6,8 26,0 5,00 33,8 7,5 25,3 4,50 33,8 8,3 24,5 4,06 33,7 9,2 23,8 3,67 33,6 9,9 23,2 3,40 30 / 22 35,3 6,2 26,4 5,69 35,2 6,9 25,8 5,10 35,1 7,7 25,2 4,59 35,0 8,5 24,6 4,14 34,8 9,3 24,0 3,74 34,6 10,0 23,6 3,45 32 / 24 36,8 6,3 26,1 5,82 36,6 7,0 25,7 5,22 36,4 7,8 25,4 4,69 36,2 8,6 25,0 4,22 35,9 9,5 24,7 3,80 35,7 10,2 24,4 3,50 24 / 17 41,7 7,3 33,3 5,73 42,0 8,0 32,6 5,21 42,3 8,9 31,9 4,76 42,7 9,8 31,1 4,36 43,1 10,8 30,4 4,00 43,5 11,6 29,8 3,75 26 / 18 42,5 7,3 35,3 5,79 42,8 8,1 34,6 5,27 43,1 9,0 33,9 4,81 43,4 9,9 33,1 4,39 43,8 10,9 32,4 4,03 44,1 11,7 31,8 3,76 27 / 19 43,4 7,4 35,2 5,86 43,7 8,2 34,5 5,35 44,0 9,0 33,7 4,87 44,2 10,0 33,0 4,44 44,5 11,0 32,3 4,05 44,7 11,9 31,7 3,77 28 / 20 44,3 7,5 35,0 5,94 44,6 8,2 34,3 5,43 44,9 9,1 33,5 4,95 45,1 10,0 32,8 4,49 45,2 11,1 32,0 4,07 45,3 12,0 31,4 3,77 30 / 22 46,3 7,6 34,2 6,11 46,7 8,3 33,5 5,64 46,9 9,1 32,7 5,13 47,0 10,2 31,9 4,62 46,9 11,4 31,1 4, / 24 48,3 7,6 32,6 6,32 48,9 8,3 31,7 5,91 49,1 9,2 30,9 5, / 17 48,4 8,8 38,0 5,48 48,8 9,6 37,2 5,10 49,1 10,5 36,3 4,67 49,1 11,7 35,5 4,21 49,0 13,0 34,6 3,76 48,8 14,3 33,9 3,41 26 / 18 49,3 8,8 39,9 5,58 49,6 9,7 39,1 5,13 49,7 10,6 38,2 4,68 49,9 11,8 37,4 4,24 49,9 13,1 36,5 3,82 49,9 14,2 35,8 3,51 27 / 19 50,2 8,9 39,7 5,67 50,3 9,7 38,9 5,17 50,5 10,7 38,0 4,70 50,7 11,9 37,2 4,27 50,8 13,1 36,3 3,87 51,0 14,2 35,6 3,59 28 / 20 51,1 8,9 39,5 5,75 51,2 9,8 38,7 5,21 51,3 10,9 37,8 4,73 51,5 12,0 37,0 4,30 51,7 13,2 36,2 3,93 51,9 14,2 35,5 3,66 30 / 22 52,8 9,0 39,3 5,89 53,1 10,0 38,5 5,31 53,3 11,0 37,6 4,82 53,4 12,1 36,8 4,40 53,4 13,3 36,0 4,03 53,4 14,2 35,3 3,76 32 / 24 54,6 9,1 39,3 5,99 55,2 10,2 38,5 5,44 55,5 11,2 37,6 4,95 55,4 12,3 36,8 4,51 55,0 13,4 36,0 4,11 54,4 14,2 35,4 3,82 Performance data are referred to operation with 30% of fresh air intake and same amount of air exhaust. (configuration CCK) EER referred only to compressors Ta = Indoor air temperature D.B/W.B DB = dry bulb WB = wet bulb kwf = Cooling capacity in kw kwe = Compressor power input in kw kws = sensible cooling capacity (kw) Not all cooling yields take into account the heat dissipated by the fan motors BT09N004GB-08 SMARTPACK 27

28 Integrated heating capacities Air temperature external exchanger inlet C (D.B. / W.B.) -5 / / / 3.9 Others Heating capacity multiplication coefficient 0,89 0,88 0,94 1 The integrated heating capacity represents the real heating capacity considering the defrost cycles too. To obtain the integrated heating capacity multiply the heating performance value in kwt (shown in the heating performance tables) by the coefficients indicated in the table. DB = dry bulb WB = wet bulb In case of below zero external air temperature with a long period of heat pump operating mode it is necessary to help the evacuation of the water produced during the defrost cycle; this to avoid the formation of ice in the unit basement. Pay attention that the evacuation will not create inconveniences to things or persons. Reduced airflow SIZES Airflow l/s Airflow m³/h Max external static pressure Pa Performance in Heating SIZES Ta ( C) DB OUTDOOR AIR TEMPERATURE (D.B./W.B.) C -7 / -8-5 / -6 0 / -1 2 / 1 7 / 6 12 / kwt kwe COP kwt kwe COP kwt kwe COP kwt kwe COP kwt kwe COP kwt kwe COP 10 8,8 1,5 5,84 9,3 1,5 5,99 10,4 1,6 6,31 10,8 1,7 6,41 12,0 1,8 6,60 13,2 2,0 6, ,8 1,6 5,44 9,2 1,6 5,55 10,2 1,8 5,79 10,7 1,8 5,87 12,0 2,0 6,05 13,4 2,2 6, ,8 1,7 5,22 9,1 1,7 5,31 10,2 1,9 5,51 10,7 1,9 5,58 12,0 2,1 5,74 13,4 2,3 5, ,8 1,7 5,07 9,2 1,8 5,15 10,2 1,9 5,34 10,7 2,0 5,41 12,0 2,2 5,56 13,5 2,4 5, ,8 1,8 5,00 9,2 1,8 5,08 10,2 1,9 5,26 10,7 2,0 5,32 12,0 2,2 5,46 13,5 2,4 5, ,9 1,9 4,74 9,3 1,9 4,80 10,4 2,1 4,95 10,8 2,2 5,01 12,1 2,4 5,13 13,6 2,6 5, ,1 2,0 5,45 11,7 2,1 5,62 13,1 2,2 5,93 13,7 2,3 6,02 15,1 2,5 6,14 16,5 2,7 6, ,3 2,2 5,20 11,8 2,2 5,31 13,2 2,4 5,51 13,8 2,5 5,56 15,2 2,7 5,62 16,6 3,0 5, ,4 2,3 5,01 11,9 2,3 5,10 13,3 2,5 5,25 13,9 2,6 5,29 15,3 2,9 5,33 16,7 3,1 5, ,4 2,3 4,88 12,0 2,4 4,96 13,4 2,6 5,08 13,9 2,7 5,11 15,3 3,0 5,15 16,7 3,3 5, ,5 2,4 4,82 12,0 2,5 4,89 13,4 2,7 5,00 13,9 2,8 5,03 15,3 3,0 5,06 16,7 3,3 5, ,6 2,6 4,54 12,2 2,6 4,60 13,5 2,9 4,68 14,1 3,0 4,70 15,4 3,3 4,72 16,8 3,6 4, ,7 2,9 6,18 18,5 3,0 6,24 20,9 3,3 6,37 23,6 3,6 6, ,1 2,7 5,48 15,8 2,8 5,56 17,7 3,1 5,71 18,6 3,2 5,76 20,7 3,5 5,86 23,1 3,9 5, ,1 2,9 5,24 15,8 3,0 5,31 17,7 3,3 5,45 18,6 3,4 5,49 20,7 3,7 5,57 23,0 4,1 5, ,1 3,0 5,08 15,8 3,1 5,15 17,8 3,4 5,28 18,6 3,5 5,32 20,7 3,8 5,40 23,0 4,2 5, ,1 3,0 5,00 15,8 3,1 5,07 17,8 3,4 5,20 18,6 3,5 5,24 20,7 3,9 5,31 23,0 4,3 5, ,1 3,2 4,71 15,8 3,3 4,76 17,7 3,6 4,88 18,6 3,8 4,91 20,8 4,2 4,99 23,2 4,6 5, ,9 3,2 6,23 20,7 3,3 6,25 23,4 3,7 6,31 26,7 4,2 6, ,4 3,1 5,61 18,1 3,2 5,66 20,0 3,5 5,74 20,9 3,6 5,76 23,2 4,0 5,78 25,8 4,5 5, ,3 3,2 5,33 18,0 3,4 5,38 20,1 3,7 5,46 20,9 3,8 5,48 23,2 4,2 5,49 25,6 4,7 5, ,2 3,3 5,16 18,0 3,5 5,21 20,1 3,8 5,28 21,0 4,0 5,30 23,2 4,4 5,31 25,6 4,8 5, ,2 3,4 5,08 18,0 3,5 5,12 20,1 3,9 5,20 21,0 4,0 5,21 23,2 4,4 5,22 25,6 4,9 5, ,3 3,6 4,78 18,1 3,8 4,81 20,2 4,1 4,86 21,0 4,3 4,88 23,4 4,8 4,90 25,9 5,3 4, ,1 4,1 6,10 26,4 4,2 6,23 29,6 4,6 6,42 33,0 5,1 6, ,3 4,0 5,26 22,4 4,1 5,41 25,3 4,4 5,69 26,5 4,6 5,76 29,6 5,0 5,89 32,8 5,5 5, ,4 4,2 5,13 22,5 4,3 5,24 25,3 4,7 5,44 26,5 4,8 5,50 29,6 5,3 5,60 32,8 5,8 5, ,6 4,3 5,03 22,6 4,4 5,11 25,4 4,8 5,28 26,6 5,0 5,33 29,6 5,5 5,42 32,7 6,0 5, ,6 4,3 4,97 22,7 4,5 5,05 25,4 4,9 5,21 26,6 5,1 5,25 29,6 5,5 5,34 32,7 6,1 5, ,8 4,6 4,72 22,8 4,8 4,78 25,6 5,2 4,90 26,7 5,4 4,94 29,6 5,9 5,01 32,6 6,5 5, ,0 4,9 5,96 30,2 5,0 6,02 33,6 5,5 6,14 37,5 6,0 6, ,0 4,7 5,28 26,1 4,9 5,36 29,1 5,3 5,52 30,4 5,5 5,57 33,8 6,0 5,65 37,5 6,6 5, ,1 5,0 5,07 26,2 5,1 5,13 29,2 5,5 5,27 30,5 5,7 5,31 33,8 6,3 5,38 37,4 6,9 5, ,2 5,1 4,93 26,3 5,3 4,99 29,3 5,7 5,10 30,6 5,9 5,14 33,9 6,5 5,20 37,4 7,1 5, ,3 5,2 4,86 26,4 5,4 4,92 29,4 5,8 5,03 30,6 6,0 5,06 33,9 6,6 5,12 37,4 7,3 5, ,7 5,6 4,61 26,7 5,7 4,65 29,6 6,3 4,73 30,8 6,5 4,75 34,0 7,1 4,79 37,4 7,8 4,82 28 SMARTPACK BT09N004GB-08

29 SIZES Ta ( C) DB OUTDOOR AIR TEMPERATURE (D.B./W.B.) C -7 / -8-5 / -6 0 / -1 2 / 1 7 / 6 12 / 11 kwt kwe COP kwt kwe COP kwt kwe COP kwt kwe COP kwt kwe COP kwt kwe COP ,2 6,0 6,20 39,2 6,2 6,31 44,0 6,8 6,49 48,5 7,4 6, ,6 5,8 5,47 33,3 6,0 5,59 37,7 6,5 5,82 39,5 6,7 5,89 44,0 7,3 6,01 48,5 8,0 6, ,2 6,1 5,31 33,8 6,3 5,40 37,9 6,8 5,59 39,6 7,0 5,64 44,0 7,7 5,74 48,5 8,4 5, ,4 6,2 5,18 34,0 6,4 5,27 38,0 7,0 5,43 39,7 7,2 5,48 44,0 7,9 5,58 48,5 8,6 5, ,4 6,3 5,11 34,0 6,5 5,19 38,1 7,1 5,35 39,8 7,4 5,40 44,0 8,0 5,49 48,5 8,7 5, ,2 6,7 4,79 33,9 6,9 4,88 38,1 7,5 5,05 39,8 7,8 5,10 44,1 8,5 5,18 48,5 9,3 5, ,1 7,2 5,99 45,3 7,4 6,08 50,5 8,1 6,26 55,8 8,7 6, ,9 7,0 5,31 38,5 7,1 5,39 43,0 7,7 5,58 45,0 8,0 5,65 50,4 8,7 5,80 56,5 9,5 5, ,4 7,3 5,13 38,9 7,5 5,20 43,1 8,1 5,36 45,1 8,3 5,41 50,4 9,1 5,54 56,6 10,0 5, ,7 7,5 5,01 39,1 7,7 5,07 43,3 8,3 5,21 45,2 8,6 5,26 50,5 9,4 5,38 56,6 10,3 5, ,8 7,6 4,95 39,2 7,8 5,01 43,4 8,4 5,14 45,3 8,7 5,19 50,5 9,5 5,30 56,5 10,5 5, ,0 8,1 4,70 39,6 8,3 4,76 44,0 9,0 4,89 45,9 9,3 4,93 50,8 10,2 4,99 56,1 11,2 5,02 Performance data are referred to operation with 30% of fresh air intake and same amount of air exhaust. (configuration CCK) COP referred only to compressors Ta = Indoor air temperature D.B. (50% of relative humidity) DB = dry bulb WB = wet bulb kwt = Provided heating capacity (kw) with coils free of ice kwe = Compressor power input in kw Not all thermal yields take into account the heat dissipated by the fan motors BT09N004GB-08 SMARTPACK 29

30 High airflow SIZES Airflow l/s Airflow m³/h Max external static pressure Pa Performance in cooling (High airflow) Size Ta ( C) DB/ WB OUTDOOR AIR TEMPERATURE C D.B. (RELATIVE HUMIDITY AT 50%) kwf kwe kws EER kwf kwe kws EER kwf kwe kws EER kwf kwe kws EER kwf kwe kws EER kwf kwe kws EER 18 / 13 11,6 1,9 9,6 6,10 11,7 2,1 9,3 5,51 11,7 2,4 9,1 4,99 11,8 2,6 8,8 4,53 11,9 2,9 8,5 4,13 11,9 3,1 8,3 3,84 20 / 14 11,8 1,9 10,4 6,17 11,9 2,1 10,1 5,56 11,9 2,4 9,9 5,02 12,0 2,6 9,6 4,55 12,0 2,9 9,3 4,13 12,1 3,2 9,1 3,84 24 / 17 12,6 2,0 11,1 6,35 12,5 2,2 10,9 5,70 12,5 2,4 10,6 5,13 12,6 2,7 10,4 4,64 12,6 3,0 10,1 4,20 12,6 3,2 9,9 3,90 26 / 18 12,8 2,0 11,9 6,41 12,8 2,2 11,7 5,74 12,8 2,5 11,4 5,16 12,8 2,7 11,2 4,67 12,8 3,0 10,9 4, / 19 13,0 2,0 11,8 6,47 13,0 2,3 11,6 5,77 13,0 2,5 11,4 5,20 13,0 2,8 11,1 4, / 20 13,3 2,0 11,7 6,52 13,2 2,3 11,5 5,80 13,2 2,5 11,3 5,22 13,2 2,8 11,1 4, / 13 14,1 2,7 11,2 5,22 14,2 3,0 10,8 4,69 14,3 3,4 10,5 4,25 14,4 3,7 10,1 3,88 14,5 4,1 9,7 3,56 14,5 4,4 9,4 3,33 20 / 14 14,4 2,7 12,2 5,28 14,5 3,1 11,9 4,72 14,5 3,4 11,5 4,26 14,6 3,8 11,1 3,88 14,7 4,1 10,8 3,55 14,7 4,4 10,5 3,33 24 / 17 15,2 2,8 13,1 5,36 15,2 3,2 12,8 4,78 15,2 3,5 12,5 4,30 15,3 3,9 12,1 3,91 15,3 4,3 11,8 3,59 15,4 4,6 11,6 3,36 26 / 18 15,5 2,9 14,0 5,36 15,5 3,2 13,7 4,79 15,5 3,6 13,3 4,32 15,5 3,9 13,0 3,94 15,6 4,3 12,7 3,61 15,7 4,6 12,5 3,39 27 / 19 15,8 3,0 13,9 5,34 15,7 3,3 13,6 4,80 15,7 3,6 13,2 4,35 15,8 4,0 12,9 3,97 15,9 4,4 12,6 3,65 16,0 4,7 12,4 3,42 28 / 20 16,1 3,0 13,7 5,32 16,0 3,3 13,4 4,81 16,0 3,7 13,1 4,38 16,1 4,0 12,8 4, / 13 19,4 3,2 16,1 5,97 19,6 3,6 15,6 5,45 19,8 4,0 15,0 4,96 19,9 4,4 14,5 4,51 20,0 4,9 14,0 4,10 20,1 5,3 13,6 3,80 20 / 14 19,8 3,3 17,3 6,07 20,0 3,6 16,8 5,51 20,1 4,0 16,4 5,00 20,2 4,4 15,9 4,54 20,3 4,9 15,5 4,12 20,4 5,3 15,1 3,82 24 / 17 21,1 3,4 18,1 6,25 21,1 3,7 17,8 5,64 21,1 4,1 17,5 5,10 21,1 4,6 17,2 4,62 21,2 5,0 16,8 4,20 21,2 5,4 16,6 3,89 26 / 18 21,4 3,4 19,2 6,29 21,4 3,8 18,9 5,67 21,5 4,2 18,6 5,13 21,5 4,6 18,3 4,65 21,5 5,1 17,9 4,22 21,5 5,5 17,7 3,92 27 / 19 21,8 3,5 18,8 6,30 21,8 3,8 18,5 5,70 21,8 4,2 18,2 5,16 21,8 4,7 17,9 4,68 21,8 5,1 17,5 4,25 21,8 5,5 17,3 3,95 28 / 20 22,1 3,5 18,3 6,31 22,2 3,9 18,0 5,71 22,2 4,3 17,6 5,18 22,2 4,7 17,3 4, / 13 21,5 3,8 17,3 5,66 21,6 4,3 16,7 5,08 21,7 4,7 16,2 4,58 21,9 5,3 15,6 4,17 22,2 5,8 15,1 3,82 22,5 6,3 14,7 3,58 20 / 14 21,9 3,8 18,6 5,71 22,1 4,3 18,1 5,14 22,2 4,8 17,5 4,65 22,4 5,3 17,0 4,22 22,6 5,9 16,4 3,86 22,8 6,3 16,0 3,60 24 / 17 23,2 4,0 19,1 5,82 23,4 4,4 18,6 5,26 23,6 4,9 18,1 4,77 23,7 5,5 17,6 4,33 23,7 6,0 17,1 3,94 23,7 6,5 16,7 3,65 26 / 18 23,7 4,0 20,2 5,86 23,8 4,5 19,7 5,29 23,9 5,0 19,2 4,79 24,0 5,5 18,8 4,35 24,0 6,1 18,3 3,95 24,0 6,6 18,0 3,67 27 / 19 24,2 4,1 20,4 5,89 24,2 4,6 20,0 5,31 24,3 5,1 19,6 4,80 24,3 5,6 19,2 4,35 24,3 6,1 18,7 3,96 24,3 6,6 18,4 3,69 28 / 20 24,7 4,2 21,0 5,93 24,6 4,6 20,7 5,32 24,6 5,1 20,3 4,80 24,6 5,6 19,9 4,35 24,6 6,2 19,6 3,97 24,6 6,7 19,3 3,70 18 / 13 27,4 4,8 22,5 5,73 27,6 5,3 21,9 5,23 27,9 5,8 21,4 4,78 28,2 6,4 20,9 4,39 28,6 7,1 20,4 4,04 29,0 7,6 20,0 3,79 20 / 14 28,0 4,8 24,2 5,82 28,1 5,3 23,7 5,26 28,3 5,9 23,2 4,79 28,6 6,5 22,7 4,38 28,9 7,2 22,2 4,03 29,3 7,7 21,8 3,79 24 / 17 29,7 5,0 25,7 5,98 29,6 5,5 25,2 5,37 29,6 6,1 24,7 4,86 29,8 6,7 24,1 4,43 30,2 7,4 23,6 4,07 30,6 8,0 23,2 3,82 26 / 18 30,3 5,1 27,3 6,00 30,2 5,6 26,8 5,41 30,2 6,2 26,2 4,90 30,3 6,8 25,6 4,46 30,7 7,5 25,0 4,09 31,0 8,1 24,6 3,84 27 / 19 30,8 5,1 27,0 6,01 30,7 5,6 26,3 5,44 30,8 6,2 25,7 4,94 30,9 6,9 25,1 4,51 31,2 7,6 24,4 4,12 31,5 8,2 23,9 3,86 28 / 20 31,4 5,2 26,4 6,00 31,3 5,7 25,7 5,48 31,4 6,3 25,0 5,00 31,5 6,9 24,3 4,56 31,8 7,6 23,6 4,16 32,0 8,3 23,0 3,88 18 / 13 31,1 5,7 25,2 5,45 31,3 6,3 24,3 4,95 31,5 7,0 23,5 4,49 31,6 7,8 22,6 4,07 31,7 8,6 21,7 3,70 31,7 9,2 21,0 3,43 20 / 14 31,7 5,8 26,9 5,46 31,8 6,4 26,2 4,95 31,9 7,1 25,4 4,49 32,1 7,8 24,7 4,09 32,2 8,6 23,9 3,73 32,2 9,3 23,4 3,47 24 / 17 33,4 6,0 27,9 5,55 33,4 6,7 27,3 5,01 33,5 7,4 26,7 4,54 33,5 8,1 26,1 4,14 33,5 8,9 25,5 3,78 33,6 9,5 25,0 3,53 26 / 18 34,0 6,1 29,6 5,59 34,0 6,7 29,0 5,04 34,0 7,4 28,4 4,57 34,0 8,2 27,7 4,15 34,0 9,0 27,1 3,79 34,0 9,6 26,6 3,53 27 / 19 34,7 6,2 29,7 5,63 34,6 6,8 29,0 5,09 34,6 7,5 28,3 4,60 34,5 8,3 27,6 4,17 34,4 9,1 26,8 3,79 34,3 9,8 26,3 3,51 28 / 20 35,3 6,2 30,0 5,68 35,3 6,9 29,1 5,14 35,2 7,6 28,3 4,64 35,0 8,3 27,5 4,19 34,8 9,2 26,6 3,78 34,6 9,9 26,0 3,49 18 / 13 40,7 7,1 33,4 5,74 41,0 7,8 32,3 5,27 41,4 8,6 31,3 4,84 42,0 9,4 30,3 4,46 42,7 10,3 29,3 4,13 43,3 11,1 28,4 3,89 20 / 14 41,6 7,1 35,6 5,82 41,8 7,9 34,7 5,31 42,2 8,7 33,8 4,87 42,7 9,5 32,8 4,49 43,3 10,4 31,9 4,15 44,0 11,2 31,2 3,92 24 / 17 44,1 7,4 38,6 5,97 44,2 8,1 37,9 5,45 44,4 8,9 37,1 4,98 44,8 9,8 36,4 4,57 45,3 10,8 35,7 4,21 45,7 11,6 35,1 3,95 26 / 18 44,8 7,5 41,0 6,00 45,0 8,2 40,3 5,49 45,3 9,0 39,6 5,02 45,5 9,9 38,9 4,60 45,9 10,9 38,2 4,22 46,2 11,7 37,6 3,94 27 / 19 45,5 7,6 40,2 6,02 45,8 8,3 39,5 5,53 46,1 9,1 38,8 5,07 46,3 10,0 38,1 4,63 46,5 11,0 37,4 4,22 46,6 11,9 36,8 3,93 28 / 20 46,2 7,7 38,8 6,03 46,7 8,4 38,0 5,57 46,9 9,2 37,3 5,11 47,1 10,1 36,6 4,66 47,1 11,1 35,8 4, / 13 46,0 8,4 36,6 5,49 46,5 9,3 36,0 5,02 47,1 10,2 35,4 4,60 47,7 11,3 34,8 4,22 48,3 12,4 34,1 3,88 48,9 13,4 33,6 3,64 20 / 14 46,7 8,5 39,7 5,52 47,4 9,4 38,8 5,07 48,0 10,3 37,9 4,65 48,6 11,4 37,0 4,26 49,1 12,5 36,1 3,92 49,5 13,5 35,4 3,66 24 / 17 49,5 8,8 42,9 5,66 50,3 9,7 41,7 5,21 50,8 10,6 40,5 4,78 51,2 11,7 39,3 4,38 51,4 12,8 38,2 4,00 51,4 13,8 37,2 3,73 26 / 18 50,7 8,9 45,0 5,72 51,3 9,8 43,9 5,26 51,7 10,7 42,8 4,82 52,0 11,8 41,7 4,41 52,1 12,9 40,6 4,03 52,1 13,9 39,7 3,75 27 / 19 51,9 9,0 43,8 5,79 52,3 9,9 42,9 5,31 52,6 10,8 41,9 4,86 52,8 11,9 41,0 4,44 52,8 13,0 40,0 4,06 52,7 14,0 39,3 3,77 28 / 20 53,3 9,1 41,9 5,87 53,4 9,9 41,2 5,37 53,4 10,9 40,5 4,90 53,5 12,0 39,8 4,47 53,5 13,1 39,1 4,08 53,5 14,1 38,6 3,80 Performance data are referred to operation with 30% of fresh air intake and same amount of air exhaust. (configuration CCK) EER referred only to compressors Ta = Indoor air temperature D.B/W.B DB = dry bulb WB = wet bulb kwf = Cooling capacity in kw kwe = Compressor power input in kw kws = sensible cooling capacity (kw) Not all cooling yields take into account the heat dissipated by the fan motors 30 SMARTPACK BT09N004GB-08

31 Integrated heating capacities Air temperature external exchanger inlet C (D.B. / W.B.) -5 / / / 3.9 Others Heating capacity multiplication coefficient 0,89 0,88 0,94 1 The integrated heating capacity represents the real heating capacity considering the defrost cycles too. To obtain the integrated heating capacity multiply the heating performance value in kwt (shown in the heating performance tables) by the coefficients indicated in the table. DB = dry bulb WB = wet bulb In case of below zero external air temperature with a long period of heat pump operating mode it is necessary to help the evacuation of the water produced during the defrost cycle; this to avoid the formation of ice in the unit basement. Pay attention that the evacuation will not create inconveniences to things or persons. High airflow rate SIZES Airflow l/s Airflow m³/h Max external static pressure Pa Performance in Heating SIZES Ta ( C) DB OUTDOOR AIR TEMPERATURE C D.B./W.B. -7 / -8-5 / -6 0 / -1 2 / 1 7 / 6 12 / 11 kwt kwe COP kwt kwe COP kwt kwe COP kwt kwe COP kwt kwe COP kwt kwe COP ,6 1,5 7,10 11,1 1,5 7,28 12,3 1,6 7,63 13,5 1,7 7, ,1 1,5 6,08 9,5 1,5 6,26 10,7 1,6 6,63 11,2 1,7 6,76 12,3 1,8 7,01 13,5 1,9 7, ,2 1,6 5,93 9,7 1,6 6,07 10,7 1,7 6,36 11,2 1,7 6,46 12,4 1,9 6,67 13,6 2,0 6, ,3 1,6 5,82 9,7 1,6 5,93 10,8 1,7 6,18 11,2 1,8 6,27 12,4 1,9 6,45 13,6 2,1 6, ,4 1,6 5,75 9,8 1,7 5,86 10,8 1,8 6,09 11,3 1,8 6,17 12,4 2,0 6,35 13,6 2,1 6, ,5 1,7 5,47 9,9 1,8 5,56 10,9 1,9 5,75 11,4 2,0 5,82 12,5 2,1 5,96 13,7 2,3 6, ,6 2,0-13,2 2,1 6,42 13,9 2,1 6,57 15,4 2,2 6,86 16,9 2,4 7, ,6 2,1 5,60 12,0 2,1 5,73 13,3 2,2 6,02 13,9 2,3 6,12 15,4 2,4 6,30 17,0 2,7 6, ,8 2,2 5,49 12,3 2,2 5,59 13,5 2,3 5,79 14,0 2,4 5,85 15,5 2,6 5,99 17,1 2,8 6, ,0 2,2 5,40 12,4 2,3 5,48 13,6 2,4 5,63 14,1 2,5 5,69 15,5 2,7 5,79 17,1 2,9 5, ,0 2,2 5,35 12,4 2,3 5,42 13,6 2,5 5,56 14,2 2,5 5,60 15,6 2,7 5,70 17,2 3,0 5, ,2 2,4 5,11 12,7 2,5 5,16 13,9 2,6 5,26 14,5 2,7 5,30 15,9 3,0 5,36 17,3 3,2 5, ,4 2,7-17,0 2,9 5,76 17,7 3,0 5,81 19,8 3,3 5,90 22,2 3,7 5, ,0 2,9 5,22 15,5 3,0 5,27 17,2 3,2 5,36 17,9 3,3 5,39 19,9 3,6 5,46 22,1 4,0 5, ,0 3,0 5,01 15,6 3,1 5,05 17,3 3,4 5,13 18,0 3,5 5,16 20,0 3,8 5,20 22,1 4,2 5, ,1 3,1 4,87 15,7 3,2 4,91 17,4 3,5 4,98 18,1 3,6 5,00 20,0 4,0 5,04 22,1 4,4 5, ,1 3,1 4,80 15,7 3,3 4,84 17,4 3,5 4,91 18,1 3,7 4,93 20,0 4,0 4,97 22,1 4,4 4, ,3 3,4 4,54 15,9 3,5 4,57 17,5 3,8 4,62 18,2 3,9 4,63 20,1 4,3 4,66 22,1 4,7 4, ,8 3,1 6,80 23,4 3,4 6,96 25,8 3,7 6, ,0 3,0-20,1 3,2 6,23 21,0 3,3 6,29 23,5 3,7 6,40 26,1 4,0 6, ,7 3,1 5,79 18,4 3,1 5,84 20,3 3,4 5,96 21,2 3,5 6,00 23,5 3,9 6,09 26,2 4,3 6, ,9 3,2 5,66 18,5 3,3 5,70 20,4 3,5 5,79 21,3 3,7 5,82 23,6 4,0 5,89 26,3 4,4 5, ,9 3,2 5,59 18,6 3,3 5,62 20,5 3,6 5,70 21,3 3,7 5,73 23,7 4,1 5,80 26,3 4,5 5, ,9 3,4 5,24 18,6 3,5 5,28 20,7 3,9 5,36 21,5 4,0 5,39 23,8 4,4 5,45 26,4 4,8 5, ,3 3,9 6,91 30,4 4,2 7,21 33,3 4,6 7, ,6 4,1 6,23 26,7 4,2 6,35 29,8 4,5 6,57 33,4 5,0 6, ,6 4,0 5,65 23,3 4,1 5,75 25,6 4,3 5,98 26,7 4,4 6,07 29,8 4,8 6,25 33,4 5,2 6, ,7 4,1 5,55 23,5 4,2 5,63 25,8 4,4 5,83 26,9 4,5 5,90 29,9 4,9 6,06 33,4 5,4 6, ,7 4,1 5,49 23,5 4,2 5,57 25,9 4,5 5,76 27,0 4,6 5,83 30,0 5,0 5,98 33,5 5,5 6, ,6 4,3 5,21 23,7 4,5 5,31 26,6 4,8 5,52 27,8 5,0 5,58 30,7 5,4 5,69 33,5 5,8 5, ,7 4,5 6,57 30,9 4,6 6,66 34,2 5,0 6,84 37,8 5,4 6, ,0 4,5 5,82 26,8 4,6 5,89 29,3 4,8 6,06 30,5 5,0 6,12 33,8 5,4 6,27 37,8 5,9 6, ,1 4,7 5,61 26,9 4,8 5,66 29,4 5,1 5,80 30,6 5,2 5,85 33,9 5,7 5,98 37,9 6,2 6, ,3 4,8 5,48 27,1 4,9 5,53 29,7 5,3 5,64 30,8 5,4 5,69 34,1 5,9 5,80 38,0 6,4 5, ,5 4,9 5,35 27,4 5,1 5,40 30,0 5,5 5,51 31,2 5,6 5,55 34,4 6,1 5,64 38,0 6,7 5, ,8 5,2 5,16 27,9 5,4 5,22 30,8 5,8 5,33 32,0 6,0 5,37 35,1 6,5 5,43 38,2 7,0 5, ,6 6,2 7,05 48,8 6,7 7, ,6 6,0 6,27 39,3 6,2 6,36 43,8 6,7 6,58 49,0 7,2 6, ,4 5,8 5,81 34,6 5,9 5,88 38,0 6,3 6,05 39,6 6,5 6,13 44,0 7,0 6,31 49,1 7,6 6, ,8 5,9 5,70 34,9 6,1 5,76 38,3 6,5 5,91 39,8 6,7 5,97 44,1 7,2 6,14 49,1 7,8 6, ,9 6,0 5,64 35,1 6,2 5,69 38,4 6,6 5,84 40,0 6,8 5,90 44,2 7,3 6,05 49,2 7,9 6, ,3 6,4 5,38 35,5 6,5 5,43 38,9 7,0 5,56 40,4 7,2 5,61 44,6 7,8 5,73 49,3 8,4 5,86 BT09N004GB-08 SMARTPACK 31

32 SIZES 151 Ta ( C) DB OUTDOOR AIR TEMPERATURE C D.B./W.B. -7 / -8-5 / -6 0 / -1 2 / 1 7 / 6 12 / 11 kwt kwe COP kwt kwe COP kwt kwe COP kwt kwe COP kwt kwe COP kwt kwe COP ,5 6,8 6,38 45,8 7,0 6,51 51,4 7,6 6,76 56,8 8,2 6, ,3 6,8-44,0 7,3 6,01 46,0 7,5 6,10 51,2 8,1 6,29 56,8 8,8 6, ,4 7,0 5,48 39,9 7,2 5,57 44,3 7,6 5,79 46,1 7,9 5,86 51,2 8,5 6,02 56,9 9,2 6, ,7 7,2 5,37 40,2 7,4 5,46 44,5 7,9 5,64 46,3 8,1 5,71 51,3 8,8 5,86 57,0 9,5 5, ,8 7,3 5,31 40,4 7,5 5,39 44,6 8,0 5,57 46,4 8,2 5,64 51,4 8,9 5,77 57,0 9,7 5, ,8 7,7 5,04 40,5 7,9 5,12 44,9 8,5 5,29 46,8 8,8 5,35 51,9 9,5 5,46 57,3 10,3 5,55 Performance data are referred to operation with 30% of fresh air intake and same amount of air exhaust. (configuration CCK) COP referred only to compressors Ta = indoor air temperature D.B. (50% of relative humidity) DB = dry bulb WB = wet bulb kwt = Provided heating capacity (kw) with coils free of ice kwe = Compressor power input in kw Not all thermal yields take into account the heat dissipated by the fan motors 32 SMARTPACK BT09N004GB-08

33 Version: unit at variable capacity (Clivet abbreviation CHC) General technical data Standard airflow Size Cooling Cooling capacity 1 kw Sensible capacity 1 kw Compressor power input 1 kw EER Heating Heating capacity 2 kw Compressor power input 2 kw COP Compressor Type of compressors 3 D-Scroll D-Scroll D-Scroll D-Scroll Scroll Scroll Scroll Scroll No. of compressors No Std Capacity control steps No Refrigerant charge (C1) kg Refrigeration circuits No Air Handling Section Fans (Supply) Type of supply fan 4 RAD RAD RAD RAD RAD RAD RAD RAD Number of supply fans No Fan diameter mm Type of motor 5 CC CC CC CC CC CC CC CC Supply airflow l/s Supply airflow m 3 /h Installed unit power kw Max. static pressure supply fan 6 Pa Fans (Exhaust) Type of exhaust fan 7 RAD RAD RAD RAD RAD RAD RAD RAD Number of exhaust fans 7 No Fan diameter 7 mm Type of motor 7 CC CC CC CC CC CC CC CC Installed unit power 7 kw External Section Fans Type of fans 8 AX AX AX AX AX AX AX AX Number of fans No Fan diameter mm Standard airflow l/s Installed unit power kw Power supply Standard power supply V 400/3~/50 400/3~/50 400/3~/50 400/3~/50 400/3~/50 400/3~/50 400/3~/50 400/3~/50 Performance data are referred to operation with 30% of fresh air intake and same amount of air exhaust. (configuration CCK) 1. Ambient air at 27 C/19 C W.B.. external exchanger entering air temperature 35 C. EER referred only to compressors 2. Ambient air 20 C D.B. Outdoor air 7 C D.B./6 C W.B.. COP referred only to compressors 3. D-SCROLL = compressor at variable capacity;. SCROLL = scroll compressor 4. RAD = radial fan 5. EC Electronic switching motor 6. Net outside static pressure to win the outlet and intake onboard pressure drops 7. Configuration for fresh air supply with exhaust and extraction 8. AX = axial fan BT09N004GB-08 SMARTPACK 33

34 Electrical data Full re-circulation (CAK) / Recirculation and renewal air (CBK) Size F.L.A. - Full load current at max admissible conditions F.L.A. - Compressor 1 A F.L.A. - Compressor 2 A F.L.A. - Single External Fan A F.L.A. - Single supply fan A F.L.A. - Total 1 A L.R.A. - Locked rotor amperes L.R.A. - Compressor 1 A L.R.A. - Compressor 2 A F.L.I. - Full load power input at max admissible conditions F.L.I. - Compressor 1 kw F.L.I. - Compressor 2 kw F.L.I. - Single External Fan kw F.L.I. - Single supply fan kw F.L.I. - Total 2 kw M.I.C. Maximum inrush current M.I.C. - Value A Data refer to standard units. Power supply: 400/3/50 Hz +/-6% Voltage unbalance: max 2 % 1. Values not including the accessories. To obtain the value of F.L.A. including accessories, add to the total F.L.A. value that of any accessories (see electrical data of accessories) 2. Values not including the accessories. To obtain the value of F.L.I. including accessories, add to the total F.L.I. value that of any accessories (see electrical data of accessories) Configuration: recirculation, renewal and exhaust air (CCK) Size F.L.A. - Full load current at max admissible conditions F.L.A. - Compressor 1 A F.L.A. - Compressor 2 A F.L.A. - Single External Fan A F.L.A. - Single supply fan A F.L.A. - Single exhaust air fan A F.L.A. - Total 1 A L.R.A. - Locked rotor amperes L.R.A. - Compressor 1 A L.R.A. - Compressor 2 A F.L.I. - Full load power input at max admissible conditions F.L.I. - Compressor 1 kw F.L.I. - Compressor 2 kw F.L.I. - Single External Fan kw F.L.I. - Single supply fan kw F.L.I. Single exhaust air fan kw F.L.I. - Total 2 kw M.I.C. Maximum inrush current M.I.C. - Value A Data refer to standard units. Power supply: 400/3/50 Hz +/-6% Voltage unbalance: max 2 % 1. Values not including the accessories. To obtain the value of F.L.A. including accessories, add to the total F.L.A. value that of any accessories (see electrical data of accessories) 2. Values not including the accessories. To obtain the value of F.L.I. including accessories, add to the total F.L.I. value that of any accessories (see electrical data of accessories) 34 SMARTPACK BT09N004GB-08

35 Electrical input of optional components To obtain the electrical input of the unit including accessories, add the standard data in Electrical Data table to those for the selected accessories. SIZES F.L.A. ABSORBED CURRENT F.L.A. EH09-4,5 kw electric elements A F.L.A. EH10-6 kw electric elements A F.L.A. EH12-9 kw electric elements A F.L.A. EH14-12 kw electric elements A F.L.A. EH17-18 kw electric elements A F.L.A. EH20-24 kw electric elements A F.L.A. HSE3 - Immersed electrodes steam humidifier of 3 kg/h A F.L.A. HSE5 - Immersed electrodes steam humidifier of 5 kg/h A F.L.A. HSE8 - Immersed electrodes steam humidifier of 8 kg/h A F.L.A. FES - Electronic filters A F.L.A. AGQ - Electrical panel anti-freeze protection A F.L.I. POWER INPUT F.L.I. EH09 - Electric elements of 4,5 kw kw F.L.I. EH10 - Electric elements of 6 kw kw F.L.I. EH12 - Electric elements of 9 kw kw F.L.I. EH14 - Electric elements of 12 kw kw F.L.I. EH17 - Electric elements of 18 kw kw F.L.I. EH20 - Electric elements of 24 kw kw F.L.I. HSE3 - Immersed electrodes steam humidifier of 3 kg/h kw F.L.I. HSE5 - Immersed electrodes steam humidifier of 5 kg/h kw F.L.I. HSE8 - Immersed electrodes steam humidifier of 8 kg/h kw F.L.I. FES - Electronic filters kw F.L.I. AGQ - Electrical panel anti-freeze protection kw The FES - Electronic filters option doesn t imply any change of the unit standard electrical data. Sound levels Sound power level (db) Sound Sound pressure Size Octave band (Hz) power level level db(a) db(a) The sound levels are referred to unit operating at full load in nominal conditions. The sound pressure level is referred at a distance of 1 m. from the ducted unit surface operating in free field conditions. External static pressure 50 Pa. (standard UNI EN ISO ) Please note that when the unit is installed in conditions different from nominal test conditions (e.g. near walls or obstacles in general), the sound levels may undergo substantial variations. BT09N004GB-08 SMARTPACK 35

36 Operating range (Cooling) The limits are meant as an indication and they have been calculated by considering: - general and non specific sizes, - standard airflow, - non-critical positioning of the unit and correct operating and maintenance of the unit, - operating at full load To verify the operation field of the operating units with percentages of external air, always calculate the Tm mixing temperature at the internal heat exchanger input. TM = INTERNAL EXCHANGER ENTERING AIR TEMPERATURE temperature measured with wet bulb (W.B.=WET BULB) TEXT = INLET AIR TEMPERATURE IN THE EXTERNAL EXCHANGER dry bulb measured temperature (D.B.=DRY BULB) 1. Standard operating range 2. Operation field of the unit in FREE-COOLING mode or with automatic distribution of the outdoor ventilation WET BULB TEMPERATURE - EXAMPLE Operating range (Heating) The limits are meant as an indication and they have been calculated by considering: - general and non specific sizes, - standard airflow, - non-critical positioning of the unit and correct operating and maintenance of the unit, - operating at full load To verify the operation field of the operating units with percentages of external air, always calculate the Tm mixing temperature at the internal heat exchanger input. TM = INTERNAL EXCHANGER ENTERING AIR TEMPERATURE dry bulb measured temperature (D.B.=DRY BULB) TEXT = INLET AIR TEMPERATURE IN THE EXTERNAL EXCHANGER temperature measured with wet bulb (W.B.=WET BULB) 1. Operation at full load 2. Field in which the unit operation is allowed only for a limited period (max 1 hour) In extended operating mode, in heat pump operation with an outside air temperature of less than 6 C, the unit performs defrosts by reversing the cycle, so as to eliminate the ice that forms on the surfaces of the outside exchanger; in addition, in the event of negative temperatures, the water resulting from the defrosts must be drained so as to avoid the accumulation of ice near the base of the unit. Make sure that this does not constitute a danger for people or things. With an outdoor air temperature between 10 c and 20 c install the following options: 2 rows hot water coil Combustion module Electrical panel anti-freeze protection 36 SMARTPACK BT09N004GB-08

37 Standard airflow SIZES Airflow l/s Airflow m³/h Max external static pressure Pa Performance in cooling (Standard airflow) SIZES TA ( C) DB/ WB 22 / / / / / / / / / / / / 22 % OF PARTIAL LOAD OUTDOOR AIR TEMPERATURE C D.B. (RELATIVE HUMIDITY AT 50%) kwf kwe kws EER kwf kwe kws EER kwf kwe kws EER kwf kwe kws EER kwf kwe kws EER kwf kwe kws EER 25 4,3 0,5 4,1 8,11 4,3 0,6 4,1 7, ,3 1,0 6,6 7,64 7,3 1,1 6,7 6,83 7,3 1,2 6,6 6,11 7,3 1,3 6,4 5, ,9 1,4 7,8 7,14 9,9 1,6 7,7 6,34 9,9 1,7 7,6 5,72 9,9 1,9 7,4 5,13 10,0 2,1 7,0 4,67 10,0 2,3 6,6 4, ,1 1,9 9,7 6,25 12,1 2,2 9,4 5,56 12,0 2,4 9,2 4,97 12,1 2,7 8,9 4,47 12,1 3,0 8,6 4,05 12,2 3,2 8,4 3, ,5 0,5 4,2 8, ,5 1,0 7,0 7,78 7,5 1,1 7,0 6,93 7,5 1,2 7,0 6,21 7,4 1,3 6,9 5, ,1 1,4 8,2 7,19 10,1 1,6 8,1 6,42 10,1 1,8 8,0 5,77 10,1 2,0 7,8 5,18 10,1 2,2 7,5 4, ,2 2,0 10,4 6,23 12,3 2,2 10,2 5,58 12,3 2,4 10,0 5,00 12,2 2,7 9,7 4,49 12,4 3,1 10,2 4,06 12,2 3,3 9,3 3, ,6 0,5 4,4 8, ,6 1,0 7,2 7,90 7,6 1,1 7,2 7,03 7,6 1,2 7,2 6,25 7,6 1,4 7,2 5, ,3 1,4 8,5 7,30 10,3 1,6 8,5 6,50 10,3 1,8 8,5 5,81 10,3 2,0 8,3 5,25 10,3 2,2 8,0 4, ,4 2,0 11,2 6,27 12,5 2,2 10,9 5,63 12,5 2,5 10,7 5,05 12,4 2,7 10,5 4,53 12,3 3,3 10,0 3,71 12,3 3,3 10,0 3, ,8 1,0 7,3 8,02 7,7 1,1 7,4 7,11 7,7 1,2 7,3 6, ,5 1,4 8,5 7,41 10,5 1,6 8,5 6,55 10,5 1,8 8,5 5,89 10,5 2,0 8,3 5, ,7 2,0 11,1 6,35 12,7 2,2 10,9 5,71 12,7 2,5 10,6 5,12 12,7 2,8 10,4 4, ,9 1,0 7,3 8,14 7,9 1,1 7,4 7,22 7,9 1,2 7,4 6, ,7 1,4 8,4 7,51 10,7 1,6 8,5 6,68 10,7 1,8 8,4 5,96 10,6 2,0 8,4 5, ,0 2,0 11,1 6,48 13,0 2,2 10,8 5,81 13,0 2,5 10,6 5,19 12,9 2,8 10,3 4, ,2 1,0 7,2 8,35 8,2 1,1 7,3 7, ,2 1,4 8,3 7,72 11,1 1,6 8,4 6,86 11,0 1,8 8,4 6, ,8 2,0 10,9 6,90 13,7 2,2 10,6 6,10 13,5 2,5 10,3 5,40 13,4 2,8 10,0 4, ,4 0,7 5,2 7,32 5,4 0,8 5,2 6,45 5,4 0,9 5,1 5, ,1 1,3 7,9 6,80 9,1 1,5 8,0 6,07 9,1 1,7 7,9 5,38 9,1 1,9 7,7 4,87 9,2 2,1 7,3 4, ,2 2,0 9,3 6,20 12,2 2,2 9,3 5,51 12,2 2,8 8,9 4,44 12,3 3,0 8,4 4,09 12,3 3,2 8,0 3,83 12,4 3,2 8,0 3, ,6 2,8 11,7 5,23 14,7 3,1 11,4 4,69 14,8 3,5 11,1 4,23 14,9 3,9 10,7 3,85 14,9 4,2 10,4 3,51 14,9 4,6 10,1 3, ,5 0,7 5,3 7,47 5,6 0,8 5,4 6, ,2 1,4 8,5 6,83 9,3 1,5 8,5 6,11 9,3 1,7 8,4 5,44 9,3 1,9 8,2 4, ,4 2,0 9,8 6,24 12,4 2,2 9,8 5,53 12,5 2,8 9,4 4,52 12,5 3,0 9,0 4,10 12,5 3,3 8,5 3,84 12,5 3,3 8,7 3, ,9 2,8 12,5 5,27 15,0 3,2 12,1 4,72 15,1 3,5 11,8 4,25 15,1 3,9 11,5 3,86 15,1 4,3 11,1 3,51 15,0 4,6 10,8 3, ,7 0,8 5,5 7, ,4 1,4 8,8 6,87 9,5 1,5 8,9 6,13 9,5 1,7 8,9 5,46 9,4 1,9 8,7 4, ,6 2,0 10,2 6,27 12,7 2,3 10,2 5,59 12,6 2,8 9,9 4,51 12,6 3,1 9,5 4, ,2 2,9 13,2 5,31 15,3 3,2 12,8 4,75 15,3 3,6 12,5 4,28 15,3 3,9 12,1 3,87 15,2 4,3 11,8 3,53 15,2 4,6 11,5 3, ,8 0,8 5,6 7, ,6 1,4 8,8 6,95 9,6 1,6 8,9 6,19 9,6 1,7 8,9 5,50 9,6 1,9 8,8 4, ,9 2,0 10,1 6,33 12,8 2,3 10,2 5,60 12,9 2,8 9,9 4,58 12,8 3,1 9,6 4, ,5 2,9 13,0 5,33 15,5 3,3 12,7 4,77 15,5 3,6 12,4 4,30 15,5 4,0 12,0 3,90 15,4 4,3 11,7 3,56 15,4 4,6 11,4 3, ,8 1,4 8,7 7,05 9,8 1,6 8,9 6,23 9,8 1,8 8,9 5, ,2 2,1 10,0 6,41 13,1 2,3 10,1 5,66 13,1 2,8 9,9 4,61 13,0 3,1 9,6 4, ,8 3,0 12,9 5,35 15,7 3,3 12,6 4,79 15,7 3,6 12,3 4,32 15,7 4,0 12,0 3,93 15,7 4,4 11,7 3, ,2 1,4 8,6 7,19 10,2 1,6 8,8 6,34 10,1 1,8 8,8 5, ,6 2,1 9,9 6,45 13,6 2,4 10,0 5,78 13,4 2,9 9,9 4, ,4 3,1 12,9 5,36 16,1 3,4 12,6 4,81 16,0 3,7 12,4 4,37 16,1 4,0 12,1 4,02 16,3 4,4 11,9 3, BT09N004GB-08 SMARTPACK 37

38 SIZES TA ( C) DB/ WB 22 / / / / / / / / / / / / 22 % OF PARTIAL LOAD OUTDOOR AIR TEMPERATURE C D.B. (RELATIVE HUMIDITY AT 50%) kwf kwe kws EER kwf kwe kws EER kwf kwe kws EER kwf kwe kws EER kwf kwe kws EER kwf kwe kws EER 25 7,2 1,0 6,7 6,93 7,2 1,1 6,8 6,38 7,2 1,2 6,8 5, ,2 1,7 10,6 7,10 12,3 1,9 10,6 6,45 12,3 2,1 10,5 5,85 12,3 2,3 10,2 5,32 12,4 2,6 9,7 4, ,5 2,4 12,5 6,82 16,6 2,7 12,5 6,19 16,6 3,0 12,3 5,61 16,7 3,3 11,9 5,08 16,8 3,6 11,2 4,61 16,9 3,9 10,7 4, ,1 3,3 15,7 6,09 20,2 3,7 15,3 5,46 20,3 4,1 14,9 4,93 20,4 4,5 14,5 4,48 20,5 5,0 14,1 4,09 20,6 5,4 13,8 3, ,4 1,0 7,0 7,09 7,5 1,1 7,1 6, ,5 1,7 11,2 7,19 12,5 1,9 11,3 6,54 12,5 2,1 11,2 5,94 12,6 2,3 10,9 5,38 12,5 2,6 10,5 4, ,9 2,4 13,1 6,90 16,9 2,7 13,1 6,26 16,9 3,0 13,0 5,66 17,0 3,3 12,5 5,12 17,0 3,7 12,1 4,62 16,9 3,9 11,7 4, ,5 3,3 16,8 6,13 20,5 3,7 16,4 5,49 20,6 4,2 16,0 4,95 20,7 4,6 15,6 4,50 20,8 5,0 15,3 4,13 21,0 5,4 15,0 3, ,6 1,1 7,3 7, ,8 1,8 11,7 7,27 12,8 1,9 11,8 6,62 12,8 2,1 11,8 6,00 12,8 2,4 11,6 5, ,2 2,5 13,7 6,98 17,3 2,7 13,8 6,33 17,3 3,0 13,6 5,72 17,4 3,4 13,2 5,17 17,3 3,7 12,7 4, ,9 3,4 17,9 6,19 20,9 3,8 17,5 5,53 20,9 4,2 17,1 4,99 21,0 4,6 16,8 4,54 21,1 5,1 16,4 4,16 21,3 5,5 16,1 3, ,8 1,1 7,4 7, ,0 1,8 11,7 7,37 13,0 1,9 11,8 6,71 13,0 2,1 11,8 6,08 13,0 2,4 11,6 5, ,6 2,5 13,6 7,11 17,6 2,7 13,7 6,40 17,6 3,0 13,6 5,77 17,7 3,4 13,2 5,24 17,5 3,7 12,9 4, ,3 3,4 17,8 6,25 21,3 3,8 17,4 5,59 21,3 4,2 17,1 5,04 21,4 4,7 16,7 4,58 21,5 5,1 16,3 4,19 21,6 5,5 16,1 3, ,3 1,8 11,6 7,47 13,3 2,0 11,8 6,81 13,3 2,2 11,8 6, ,0 2,5 13,5 7,20 18,0 2,8 13,6 6,48 17,9 3,1 13,6 5,86 17,9 3,4 13,3 5,28 17,8 3,7 12,9 4, ,8 3,4 17,7 6,33 21,8 3,8 17,3 5,67 21,7 4,3 16,9 5,11 21,7 4,7 16,5 4,63 21,7 5,2 16,2 4,21 21,8 5,6 15,9 3, ,9 1,8 11,4 7,68 13,8 2,0 11,7 6,99 13,8 2,2 11,8 6, ,7 2,6 13,3 7,31 18,7 2,8 13,5 6,66 18,6 3,1 13,5 6,01 18,5 3,4 13,3 5, ,7 3,5 17,1 6,53 22,8 3,9 16,7 5,90 22,7 4,3 16,2 5,31 22,6 4,7 15,8 4,76 22,3 5,2 15,3 4, ,1 1,2 7,8 6,64 8,1 1,3 7,9 6,09 8,2 1,5 7,8 5, ,8 2,0 12,0 6,81 13,8 2,2 12,1 6,17 13,9 2,5 11,9 5,60 14,0 2,8 11,6 5,07 14,1 3,0 11,1 4, ,5 2,9 14,1 6,46 18,7 3,2 14,0 5,91 18,8 3,5 13,9 5,31 18,9 3,9 13,5 4,82 18,9 4,3 12,9 4,36 18,9 4,7 12,4 4, ,3 4,0 17,8 5,63 22,3 4,4 17,4 5,03 22,4 4,9 16,9 4,57 22,8 5,4 16,4 4,20 23,3 5,9 15,9 3,92 23,8 6,4 15,6 3, ,3 1,2 8,0 6,75 8,4 1,4 8,1 6, ,1 2,0 12,7 6,88 14,1 2,3 12,8 6,23 14,2 2,5 12,7 5,65 14,2 2,8 12,4 5,13 14,3 3,1 12,0 4, ,0 2,9 14,7 6,57 19,1 3,2 14,7 5,95 19,1 3,6 14,6 5,35 19,2 4,0 14,3 4,85 19,3 4,4 13,7 4,40 19,3 4,7 13,1 4, ,9 4,0 18,8 5,75 22,9 4,4 18,4 5,16 23,0 4,9 17,9 4,66 23,2 5,5 17,4 4,24 23,4 6,0 17,0 3,88 23,6 6,5 16,6 3, ,6 1,3 8,2 6, ,4 2,1 13,3 6,93 14,4 2,3 13,4 6,25 14,5 2,5 13,4 5,70 14,5 2,8 13,2 5, ,4 2,9 15,4 6,63 19,4 3,2 15,5 5,99 19,4 3,6 15,3 5,38 19,5 4,0 15,1 4,88 19,6 4,4 14,5 4, ,4 4,0 19,7 5,85 23,5 4,5 19,3 5,25 23,5 5,0 18,8 4,73 23,6 5,5 18,3 4,27 23,6 6,1 17,9 3,87 23,6 6,6 17,5 3, ,7 1,3 8,4 6, ,7 2,1 13,2 7,01 14,7 2,3 13,4 6,35 14,7 2,6 13,4 5,77 14,7 2,8 13,3 5, ,8 3,0 15,3 6,69 19,8 3,3 15,4 6,05 19,8 3,6 15,4 5,43 19,8 4,0 15,1 4,93 19,9 4,4 14,6 4, ,0 4,0 19,5 5,92 24,0 4,5 19,1 5,33 24,0 5,0 18,6 4,79 24,0 5,6 18,2 4,31 23,9 6,2 17,7 3,87 23,7 6,7 17,4 3, ,8 1,3 8,5 6, ,9 2,1 13,2 7,07 15,0 2,3 13,4 6,43 15,0 2,6 13,4 5,83 15,0 2,8 13,3 5, ,1 3,0 15,4 6,72 20,2 3,3 15,4 6,10 20,2 3,7 15,3 5,49 20,2 4,1 15,1 4,97 20,2 4,5 14,6 4, ,4 4,1 19,5 5,97 24,5 4,6 19,0 5,38 24,5 5,1 18,6 4,83 24,4 5,6 18,1 4,34 24,2 6,2 17,7 3, ,6 2,2 12,9 7,23 15,6 2,4 13,2 6,55 15,5 2,6 13,4 5, ,0 3,0 15,0 6,90 20,9 3,4 15,3 6,17 21,0 3,7 15,2 5,64 20,9 4,1 15,1 5, ,4 4,2 19,9 6,00 25,3 4,7 19,5 5,40 25,3 5,2 19,1 4,87 25,2 5,7 18,7 4,41 25,1 6,3 18,3 4, PARTIAL LOAD PERCENTAGE = SUPPLIED POWER / FULL LOAD CAPACITY, REFERRED TO THE SAME CONDITIONS Performance data are referred to operation with 30% of fresh air intake and same amount of air exhaust. (configuration CCK) Ta = Indoor air temperature D.B/W.B DB = dry bulb WB = wet bulb EER referred only to compressors kwf = Cooling capacity in kw kwe = Compressor power input in kw kws = sensible cooling capacity (kw) Not all cooling yields take into account the heat dissipated by the fan motors 38 SMARTPACK BT09N004GB-08

39 Standard airflow SIZES Airflow l/s Airflow m³/h Max external static pressure Pa SIZES TA ( C) DB/ WB 22 / / / / / / / / / / / / / / / / / / 22 CAPACITY STEPS OUTDOOR AIR TEMPERATURE C D.B. (RELATIVE HUMIDITY AT 50%) kwf kwe kws EER kwf kwe kws EER kwf kwe kws EER kwf kwe kws EER kwf kwe kws EER kwf kwe kws EER C1 18,0 2,2 15,5 8,04 18,1 2,5 15,6 7,13 18,1 2,9 15,4 6,34 18,1 3,2 14,9 5,65 18,1 3,6 14,1 5, C2 19,8 2,8 16,3 7,11 19,9 3,1 16,3 6,47 19,9 3,4 16,1 5,85 20,0 3,8 15,6 5,32 19,9 4,1 14,8 4,83 19,9 4,4 14,2 4,50 C1+C2 30,6 5,9 23,7 5,18 30,6 6,7 23,0 4,56 30,6 7,5 22,3 4,09 30,7 8,3 21,7 3,71 30,8 9,1 21,0 3,40 30,9 9,7 20,5 3,19 C1 18,4 2,3 16,4 8,14 18,4 2,6 16,5 7,19 18,4 2,9 16,4 6,40 18,4 3,2 16,1 5,67 18,4 3,6 15,3 5, C2 20,2 2,8 17,1 7,16 20,3 3,1 17,3 6,53 20,3 3,4 17,1 5,89 20,3 3,8 16,7 5,37 20,2 4,2 15,9 4,87 20,2 4,4 15,4 4,53 C1+C2 31,1 6,0 25,1 5,20 31,2 6,7 24,4 4,62 31,2 7,5 23,8 4,14 31,2 8,3 23,1 3,74 31,2 9,2 22,4 3,41 31,2 9,8 21,9 3,18 C1 18,8 2,3 17,3 8,28 18,8 2,6 17,4 7,26 18,8 2,9 17,3 6,46 18,8 3,3 17,0 5, C2 20,7 2,8 18,0 7,27 20,6 3,1 18,3 6,58 20,6 3,5 18,0 5,95 20,7 3,8 17,7 5, C1+C2 31,7 6,0 26,5 5,24 31,7 6,8 25,9 4,67 31,8 7,6 25,2 4,19 31,7 8,4 24,5 3,78 31,6 9,2 23,8 3,43 31,5 9,9 23,3 3,18 C1 19,2 2,3 17,2 8,33 19,2 2,6 17,3 7,38 19,1 2,9 17,3 6,52 19,0 3,3 17,1 5, C2 21,1 2,9 17,9 7,38 21,1 3,2 18,1 6,69 21,0 3,5 18,0 6,03 21,0 3,8 17,7 5, C1+C2 32,3 6,1 26,4 5,29 32,4 6,9 25,8 4,71 32,3 7,7 25,1 4,23 32,3 8,5 24,4 3,81 32,1 9,3 23,8 3,46 31,9 10,0 23,2 3,20 C1 19,5 2,3 17,0 8,43 19,5 2,6 17,3 7,42 19,5 3,0 17,3 6,59 19,3 3,3 17,1 5, C2 21,6 2,9 17,8 7,48 21,5 3,2 18,0 6,80 21,4 3,5 18,0 6,11 21,3 3,8 17,8 5, C1+C2 33,0 6,2 26,3 5,35 33,0 6,9 25,6 4,75 32,9 7,7 25,0 4,26 32,8 8,5 24,3 3,84 32,6 9,3 23,7 3,49 32,4 10,0 23,2 3,24 C1 20,4 2,3 16,8 8,75 20,2 2,7 17,1 7,61 20,1 3,0 17,2 6, C2 22,4 2,9 17,5 7,68 22,4 3,2 17,8 6,99 22,2 3,5 18,0 6,29 21,3 3,8 17,8 5, C1+C2 34,5 6,3 25,9 5,51 34,3 7,1 25,3 4,82 34,1 7,9 24,7 4,30 33,9 8,7 24,1 3,90 33,7 9,4 23,5 3, C1 18,3 2,3 16,9 8,11 18,3 2,5 16,9 7,22 18,4 2,8 16,7 6,45 18,4 3,2 16,2 5,79 18,5 3,5 15,6 5, C2 24,9 3,7 19,7 6,67 25,0 4,1 19,7 6,02 25,0 4,6 19,5 5,45 25,1 5,1 19,0 4,95 25,4 5,6 18,0 4,54 25,6 6,0 17,2 4,27 C1+C2 34,5 7,1 27,0 4,86 34,7 8,0 26,2 4,36 35,0 8,9 25,4 3,94 35,2 9,8 24,6 3,59 35,3 10,8 23,9 3,28 35,4 11,6 23,3 3,06 C1 18,7 2,3 17,7 8,21 18,7 2,6 17,8 7,28 18,7 2,9 17,7 6,49 18,7 3,2 17,4 5,82 18,7 3,6 16,8 5, C2 25,4 3,8 20,6 6,71 25,4 4,2 20,8 6,05 25,5 4,7 20,6 5,48 25,6 5,1 20,1 4,98 25,7 5,6 19,3 4,56 25,9 6,0 18,6 4,28 C1+C2 35,3 7,2 28,5 4,92 35,4 8,1 27,8 4,39 35,5 9,0 27,0 3,96 35,6 9,9 26,2 3,59 35,7 10,9 25,4 3,28 35,8 11,7 24,8 3,06 C1 19,2 2,3 18,3 8,31 19,2 2,6 18,3 7,39 19,2 2,9 18,2 6,57 19,1 3,3 18,2 5, C2 25,8 3,8 21,9 6,73 26,0 4,3 21,8 6,12 25,9 4,7 21,7 5,49 26,1 5,2 21,2 5,05 26,1 5,7 20,5 4, C1+C2 36,1 7,3 30,0 4,96 36,1 8,2 29,2 4,42 36,1 9,1 28,4 3,98 36,1 10,0 27,7 3,60 36,1 11,0 26,9 3,29 36,2 11,8 26,2 3,07 C1 19,5 2,3 18,5 8,37 19,5 2,6 18,6 7,43 19,5 2,9 18,5 6,61 19,4 3,3 18,5 5, C2 26,5 3,9 21,5 6,83 26,4 4,3 21,7 6,15 26,4 4,8 21,7 5,56 26,4 5,3 21,4 5,03 26,5 5,8 20,6 4, C1+C2 36,9 7,4 29,8 5,00 36,8 8,3 29,0 4,46 36,8 9,2 28,2 4,00 36,7 10,1 27,4 3,62 36,7 11,1 26,6 3,30 36,6 11,9 26,0 3,08 C1 19,9 2,3 18,4 8,48 19,8 2,6 18,7 7,48 19,7 3,0 18,7 6, C2 27,0 3,9 21,3 6,91 27,0 4,3 21,5 6,23 26,9 4,8 21,7 5,61 26,9 5,3 21,4 5,08 26,9 5,8 20,7 4, C1+C2 37,5 7,4 29,6 5,04 37,5 8,4 28,9 4,49 37,5 9,3 28,1 4,04 37,4 10,2 27,3 3,65 37,3 11,2 26,5 3,33 37,1 12,0 25,9 3,10 C1 20,6 2,4 18,3 8,65 20,5 2,7 18,6 7,63 20,4 3,0 18,8 6, C2 28,0 4,0 21,1 6,98 28,1 4,4 21,3 6,36 28,0 4,9 21,5 5,73 27,8 5,4 21,3 5, C1+C2 38,5 7,6 29,9 5,09 39,0 8,6 29,1 4,56 39,2 9,5 28,4 4,12 39,1 10,5 27,6 3, C1 27,3 3,5 23,7 7,75 27,4 3,9 23,9 7,03 27,6 4,3 23,5 6,39 27,7 4,8 22,9 5,80 27,8 5,3 21,8 5, C2 27,3 3,5 23,7 7,75 27,4 3,9 23,9 7,03 27,6 4,3 23,5 6,39 27,7 4,8 22,9 5,80 27,8 5,3 21,8 5, C1+C2 44,5 8,0 35,2 5,56 44,7 8,9 34,2 5,00 45,0 10,0 33,2 4,52 45,3 11,0 32,2 4,11 45,6 12,1 31,2 3,76 45,9 13,0 30,4 3,52 C1 27,8 3,6 25,1 7,81 27,9 3,9 25,2 7,09 28,1 4,4 25,1 6,43 28,2 4,8 24,6 5,85 28,3 5,3 23,5 5, C2 27,8 3,6 25,1 7,81 27,9 3,9 25,2 7,09 28,1 4,4 25,1 6,43 28,2 4,8 24,6 5,85 28,3 5,3 23,5 5, C1+C2 45,6 8,1 37,3 5,62 45,7 9,0 36,4 5,06 45,9 10,0 35,4 4,57 46,0 11,1 34,5 4,14 46,2 12,2 33,5 3,77 46,3 13,2 32,8 3,51 C1 28,4 3,6 26,3 7,88 28,6 4,0 26,5 7,15 28,6 4,4 26,5 6,49 28,7 4,9 26,0 5, C2 28,4 3,6 26,3 7,88 28,6 4,0 26,5 7,15 28,6 4,4 26,5 6,49 28,7 4,9 26,0 5, C1+C2 46,6 8,2 39,4 5,68 46,7 9,1 38,5 5,11 46,8 10,1 37,6 4,61 46,8 11,2 36,7 4,17 46,8 12,4 35,7 3,78 46,8 13,3 35,0 3,51 C1 29,0 3,6 26,2 7,96 29,1 4,0 26,5 7,23 29,1 4,4 26,5 6,55 29,2 4,9 26,2 5, C2 29,0 3,6 26,2 7,96 29,1 4,0 26,5 7,23 29,1 4,4 26,5 6,55 29,2 4,9 26,2 5, C1+C2 47,6 8,3 39,1 5,73 47,7 9,2 38,2 5,16 47,6 10,3 37,3 4,65 47,6 11,3 36,4 4,20 47,5 12,5 35,6 3,80 47,4 13,5 34,9 3,52 C1 29,7 3,7 25,8 8,06 29,6 4,1 26,4 7,30 29,7 4,5 26,5 6,62 29,7 4,9 26,3 6, C2 29,7 3,7 25,8 8,06 29,6 4,1 26,4 7,30 29,7 4,5 26,5 6,62 29,7 4,9 26,3 6, C1+C2 49,6 8,5 36,4 5,83 49,5 9,5 35,6 5,23 49,3 10,5 34,8 4,70 49,2 11,6 34,0 4,25 49,0 12,7 33,2 3, C1 30,8 3,7 25,6 8,21 30,8 4,1 26,2 7,45 30,9 4,6 26,3 6, C2 30,8 3,7 25,6 8,21 30,8 4,1 26,2 7,45 30,9 4,6 26,3 6, C1+C2 50,6 8,6 38,9 5,88 50,3 9,6 38,1 5,25 50,2 10,6 37,3 4,72 50,0 11,7 36,6 4,28 49,9 12,8 35,8 3, BT09N004GB-08 SMARTPACK 39

40 SIZES 151 TA ( C) DB/ WB 22 / / / / / / 22 CAPACITY STEPS OUTDOOR AIR TEMPERATURE C D.B. (RELATIVE HUMIDITY AT 50%) kwf kwe kws EER kwf kwe kws EER kwf kwe kws EER kwf kwe kws EER kwf kwe kws EER kwf kwe kws EER C1 29,6 3,8 26,2 7,73 29,8 4,2 26,3 7,06 30,0 4,7 26,2 6,42 30,1 5,2 25,5 5,84 30,2 5,7 24,4 5, C2 33,4 4,4 27,8 7,51 33,4 4,9 27,9 6,79 33,3 5,4 27,5 6,15 33,4 6,0 26,7 5,59 33,6 6,6 25,4 5,09 33,7 7,1 24,4 4,75 C1+C2 51,1 9,5 40,0 5,40 51,4 10,5 38,9 4,88 51,7 11,7 37,8 4,42 52,0 12,9 36,7 4,02 52,2 14,2 35,6 3,67 52,3 15,3 34,8 3,41 C1 30,2 3,9 27,7 7,80 30,4 4,3 28,0 7,11 30,5 4,7 27,7 6,46 30,7 5,2 27,3 5,88 30,7 5,7 26,3 5, C2 34,0 4,5 29,4 7,57 33,9 5,0 29,6 6,83 33,9 5,5 29,2 6,19 34,0 6,0 28,5 5,62 34,2 6,7 27,3 5,12 34,4 7,2 26,3 4,78 C1+C2 52,1 9,6 42,4 5,44 52,3 10,7 41,4 4,91 52,5 11,8 40,3 4,44 52,7 13,1 39,3 4,04 52,9 14,4 38,3 3,68 53,0 15,5 37,4 3,42 C1 30,8 3,9 29,0 7,88 31,0 4,3 29,3 7,18 31,1 4,8 29,3 6,52 31,2 5,3 28,8 5,92 31,1 5,8 28,1 5, C2 34,7 4,5 30,9 7,63 34,6 5,0 31,0 6,88 34,5 5,5 30,8 6,22 34,5 6,1 30,3 5,65 34,6 6,7 29,3 5,13 34,8 7,3 28,5 4,79 C1+C2 53,2 9,7 44,8 5,48 53,3 10,8 43,8 4,94 53,3 11,9 42,8 4,47 53,5 13,2 41,8 4,05 53,6 14,5 40,7 3,69 53,7 15,6 39,9 3,44 C1 31,4 3,9 28,9 7,95 31,6 4,4 29,3 7,25 31,7 4,8 29,4 6,59 31,7 5,3 29,1 5,98 31,6 5,8 28,2 5, C2 35,4 4,6 30,7 7,71 35,2 5,1 30,9 6,96 35,1 5,6 30,8 6,29 35,1 6,2 30,4 5,70 35,3 6,8 29,3 5,17 35,4 7,3 28,4 4,82 C1+C2 54,3 9,8 44,5 5,53 54,2 10,9 43,5 4,98 54,2 12,1 42,5 4,50 54,3 13,3 41,4 4,08 54,3 14,6 40,4 3,71 54,4 15,8 39,6 3,45 C1 32,0 4,0 28,8 8,04 32,2 4,4 29,0 7,33 32,2 4,8 29,5 6,65 32,2 5,3 29,1 6,04 32,1 5,8 28,4 5, C2 36,1 4,6 30,5 7,79 35,9 5,1 30,8 7,03 35,7 5,6 30,8 6,35 35,6 6,2 30,4 5,75 35,8 6,9 29,5 5,21 35,9 7,4 28,7 4,85 C1+C2 55,4 9,9 44,4 5,58 55,3 11,0 43,3 5,02 55,2 12,2 42,2 4,53 55,2 13,4 41,1 4,11 55,2 14,8 40,0 3,74 55,2 15,9 39,1 3,47 C1 33,4 4,1 28,2 8,22 33,5 4,5 28,9 7,48 33,4 4,9 29,4 6,79 33,4 5,4 29,2 6,17 33,1 5,9 28,6 5, C2 37,5 4,7 30,0 7,95 37,3 5,2 30,5 7,18 37,0 5,7 30,7 6,47 36,9 6,3 30,3 5,85 36,9 7,0 29,7 5, C1+C2 57,7 10,1 44,3 5,69 57,5 11,2 43,0 5,12 57,3 12,4 41,6 4,62 57,1 13,7 40,3 4,18 56,9 15,0 38,9 3,79 56,8 16,2 37,8 3,52 Performance data are referred to operation with 30% of fresh air intake and same amount of air exhaust. (configuration CCK) Ta = Indoor air temperature D.B/W.B DB = dry bulb WB = wet bulb kwf = Cooling capacity in kw kwe = Compressor power input in kw kws = sensible cooling capacity (kw) Not all cooling yields take into account the heat dissipated by the fan motors 40 SMARTPACK BT09N004GB-08

41 Integrated heating capacities Standard airflow Air temperature external exchanger inlet C (D.B. / W.B.) -5 / / / 3.9 Others Heating capacity multiplication coefficient 0,89 0,88 0,94 1 The integrated heating capacity represents the real heating capacity considering the defrost cycles too. To obtain the integrated heating capacity multiply the heating performance value in kwt (shown in the heating performance tables) by the coefficients indicated in the table. DB = dry bulb WB = wet bulb In case of below zero external air temperature with a long period of heat pump operating mode it is necessary to help the evacuation of the water produced during the defrost cycle; this to avoid the formation of ice in the unit basement. Pay attention that the evacuation will not create inconveniences to things or persons. Performance in Heating SIZES TA ( C) DB OUTDOOR AIR TEMPERATURE ( C) D.B./W.B. PARTIAL LOAD % -7 / -8-5 / -6 0 / -1 2 / 1 7 / 6 12 / 11 kwt kwe COP kwt kwe COP kwt kwe COP kwt kwe COP kwt kwe COP kwt kwe COP ,0 0,8 8,68 7,8 0,8 9, ,3 1,1 7,42 8,7 1,1 7,63 9,7 1,2 8,09 10,8 1,3 8, ,3 1,5 6,38 10,4 1,5 6,77 10,8 1,6 6,92 12,2 1,7 7,24 13,7 1,8 7, ,3 0,8 7,48 7,0 0,9 7,97 7,8 0,9 8, ,1 1,1 6,27 7,4 1,1 6,47 8,3 1,2 6,92 8,7 1,2 7,07 9,7 1,3 7,43 10,8 1,4 7, ,1 1,5 5,94 9,5 1,6 6,05 10,5 1,7 6,31 10,9 1,7 6,42 12,2 1,8 6,65 13,6 2,0 6, ,8 0,5 7,62 4,3 0,5 8, ,0 0,9 6,96 6,3 0,9 7,15 7,0 0,9 7,57 7,8 1,0 8, ,1 1,2 6,07 7,5 1,2 6,23 8,4 1,3 6,61 8,7 1,3 6,75 9,7 1,4 7,05 10,8 1,5 7, ,2 1,6 5,73 9,5 1,6 5,82 10,5 1,7 6,04 11,0 1,8 6,13 12,2 1,9 6,32 13,6 2,1 6, ,8 0,5 7,36 4,3 0,5 7, ,1 0,8 6,11 5,4 0,9 6,31 6,0 0,9 6,76 6,3 0,9 6,93 7,0 1,0 7,32 7,8 1,0 7, ,2 1,2 5,92 7,5 1,2 6,07 8,4 1,3 6,42 8,7 1,3 6,54 9,7 1,4 6,82 10,8 1,5 7, ,2 1,6 5,58 9,5 1,7 5,66 10,6 1,8 5,87 11,0 1,9 5,94 12,2 2,0 6,12 13,6 2,2 6, ,9 0,5 7,11 4,3 0,6 7, ,1 0,9 5,96 5,4 0,9 6,15 6,0 0,9 6,57 6,3 0,9 6,72 7,0 1,0 7,06 7,8 1,0 7, ,2 1,2 5,77 7,5 1,3 5,90 8,4 1,3 6,22 8,8 1,4 6,33 9,7 1,5 6,59 10,8 1,6 6, ,1 1,7 5,41 9,5 1,7 5,49 10,6 1,9 5,68 11,0 1,9 5,75 12,3 2,1 5,92 13,6 2,2 6, ,9 0,6 6,77 4,3 0,6 7, ,2 0,9 5,75 5,4 0,9 5,92 6,0 1,0 6,31 6,3 1,0 6,44 7,0 1,0 6,72 7,8 1,1 7, ,2 1,3 5,56 7,5 1,3 5,68 8,4 1,4 5,95 8,8 1,5 6,04 9,7 1,6 6,27 10,8 1,7 6, ,1 1,8 5,17 9,5 1,8 5,25 10,6 2,0 5,43 11,1 2,0 5,50 12,3 2,2 5,64 13,6 2,4 5, ,9 1,1 8,04 9,9 1,1 8, ,0 1,6 7,00 12,1 1,6 7,38 13,5 1,8 7, ,2 2,0 5,66 11,6 2,0 5,81 12,9 2,1 6,15 13,5 2,1 6,27 15,0 2,3 6,53 16,9 2,5 6, ,0 0,7 7,66 5,5 0,7 8, ,7 1,1 6,84 8,1 1,1 7,05 8,9 1,2 7,49 9,9 1,3 7, ,1 1,6 5,88 9,6 1,6 6,08 10,6 1,6 6,46 11,1 1,7 6,60 12,2 1,8 6,82 13,5 1,9 6, ,5 2,1 5,47 11,9 2,1 5,57 13,1 2,3 5,79 13,6 2,3 5,86 15,2 2,5 6,02 16,9 2,8 6, ,5 0,7 6,74 5,0 0,7 7,35 5,5 0,7 7, ,7 1,1 5,94 7,0 1,1 6,15 7,8 1,2 6,63 8,1 1,2 6,80 9,0 1,3 7,16 9,9 1,3 7, ,2 1,6 5,77 9,7 1,6 5,92 10,7 1,7 6,22 11,1 1,8 6,32 12,3 1,9 6,57 13,6 2,0 6, ,6 2,2 5,32 12,0 2,2 5,40 13,2 2,4 5,55 13,8 2,5 5,61 15,2 2,7 5,72 16,9 2,9 5, ,3 0,7 6,36 4,5 0,7 6,60 5,0 0,7 7,14 5,6 0,7 7, ,7 1,1 5,88 7,0 1,2 6,07 7,8 1,2 6,48 8,1 1,2 6,62 9,0 1,3 6,94 10,0 1,4 7, ,3 1,6 5,66 9,7 1,7 5,79 10,8 1,8 6,06 11,2 1,8 6,15 12,3 2,0 6,29 13,6 2,1 6, ,8 2,3 5,21 12,2 2,3 5,27 13,3 2,5 5,40 13,8 2,5 5,44 15,3 2,8 5,53 16,9 3,0 5, ,3 0,7 6,22 4,5-6,43 5,0 0,7 6,91 5,6 0,8 7, ,8 1,2 5,79 7,1 1,2 5,96 7,9 1,2 6,31 8,2 1,3 6,44 9,0 1,3 6,72 10,0 1,4 6, ,4 1,7 5,55 9,8 1,7 5,66 10,9 1,8 5,90 11,3 1,9 5,97 12,4 2,0 6,09 13,7 2,2 6, ,9 2,3 5,09 12,3 2,4 5,13 13,4 2,6 5,23 13,9 2,6 5,27 15,3 2,9 5,34 17,0 3,1 5, ,4 0,7 6,01 4,6 0,7 6,20 5,1 0,8 6,61 5,6 0,8 6, ,9 1,2 5,66 7,2 1,2 5,80 7,9 1,3 6,07 8,2 1,3 6,18 9,1 1,4 6,41 10,0 1,5 6, ,6 1,8 5,40 9,9 1,8 5,48 11,0 1,9 5,67 11,4 2,0 5,72 12,5 2,1 5,82 13,8 2,3 5, ,1 2,5 4,92 12,5 2,5 4,94 13,5 2,7 5,00 14,0 2,8 5,03 15,4 3,0 5,08 17,0 3,3 5,13 BT09N004GB-08 SMARTPACK 41

42 SIZES TA ( C) DB PARTIAL LOAD % OUTDOOR AIR TEMPERATURE ( C) D.B./W.B. -7 / -8-5 / -6 0 / -1 2 / 1 7 / 6 12 / 11 kwt kwe COP kwt kwe COP kwt kwe COP kwt kwe COP kwt kwe COP kwt kwe COP ,7 2,2 7,57 18,7 2,4 7, ,7 2,7 6,50 18,5 2,8 6,60 20,8 3,1 6,80 23,4 3,4 6, ,0 1,6 7,42 13,5 1,7 7, ,2 2,1 6,65 14,9 2,2 6,76 16,6 2,4 7,01 18,6 2,6 7, ,9 2,7 5,85 17,8 2,9 6,05 18,6 3,0 6,13 20,8 3,3 6,28 23,3 3,6 6, ,7 1,6 6,78 12,0 1,7 7,09 13,4 1,8 7, ,2 2,2 6,37 14,9 2,3 6,46 16,6 2,5 6,69 18,6 2,7 6, ,3 2,8 5,53 16,0 2,9 5,61 17,9 3,1 5,79 18,7 3,2 5,85 20,9 3,5 5,99 23,3 3,8 6, ,2 1,6 6,46 10,7 1,6 6,59 12,0 1,7 6,88 13,4 1,9 7, ,7 2,1 5,92 14,3 2,3 6,18 14,9 2,4 6,27 16,6 2,6 6,48 18,6 2,8 6, ,3 2,8 5,37 16,0 2,9 5,45 17,9 3,2 5,62 18,7 3,3 5,68 20,9 3,6 5,80 23,3 3,9 5, ,2 1,6 6,27 10,7 1,7 6,40 12,0 1,8 6,68 13,4 1,9 6, ,8 2,2 5,76 14,3 2,4 6,00 14,9 2,5 6,08 16,6 2,7 6,27 18,6 2,9 6, ,3 2,9 5,20 16,0 3,0 5,28 17,9 3,3 5,44 18,7 3,4 5,50 20,9 3,7 5,62 23,3 4,1 5, ,1 1,6 5,72 10,3 1,7 6,02 10,7 1,8 6,12 12,0 1,9 6,39 13,4 2,0 6, ,2 2,3 5,43 12,8 2,3 5,52 14,3 2,5 5,74 15,0 2,6 5,82 16,7 2,8 5,99 18,5 3,0 6, ,2 3,1 4,96 15,9 3,2 5,04 17,9 3,4 5,20 18,8 3,6 5,25 21,0 3,9 5,36 23,3 4,3 5, ,7 2,5 7,53 20,8 2,7 7, ,1 3,1 6,57 20,9 3,2 6,63 23,4 3,5 6,75 26,1 3,8 6, ,6 1,8 7,42 15,2 2,0 7, ,1 2,4 6,71 16,8 2,5 6,79 18,7 2,7 6,94 20,9 3,0 7, ,0 3,0 5,92 20,1 3,3 6,07 21,0 3,4 6,12 23,4 3,8 6,20 26,1 4,2 6, ,2 1,8 6,86 13,6 1,9 7,08 15,2 2,1 7, ,5 2,3 6,20 16,2 2,5 6,41 16,9 2,6 6,48 18,8 2,8 6,61 21,0 3,1 6, ,4 3,1 5,61 18,1 3,2 5,67 20,2 3,5 5,79 21,1 3,6 5,83 23,5 4,0 5,90 26,1 4,4 5, ,7 1,8 6,56 12,2 1,8 6,64 13,6 2,0 6,88 15,2 2,2 7, ,9 2,3 5,94 14,5 2,4 6,03 16,2 2,6 6,22 16,9 2,7 6,28 18,8 2,9 6,40 21,0 3,2 6, ,5 3,2 5,46 18,2 3,3 5,51 20,3 3,6 5,61 21,1 3,7 5,65 23,5 4,1 5,71 26,1 4,5 5, ,7 1,8 6,37 12,2 1,9 6,44 13,7 2,1 6,65 15,2 2,2 6, ,0 2,4 5,77 14,6 2,5 5,85 16,2 2,7 6,02 16,9 2,8 6,08 18,8 3,0 6,19 21,0 3,3 6, ,7 3,3 5,33 18,4 3,4 5,37 20,4 3,7 5,44 21,3 3,9 5,47 23,6 4,3 5,52 26,1 4,7 5, ,1 1,7 5,77 10,5 1,8 5,91 11,8 1,9 6,11 12,3 2,0 6,18 13,7 2,2 6,33 15,2 2,3 6, ,0 2,5 5,54 14,7 2,6 5,61 16,3 2,8 5,76 17,0 2,9 5,80 18,9 3,2 5,90 21,0 3,5 6, ,0 3,5 5,14 18,7 3,6 5,16 20,6 4,0 5,21 21,4 4,1 5,23 23,7 4,5 5,27 26,2 4,9 5,30 PARTIAL LOAD PERCENTAGE = SUPPLIED POWER / FULL LOAD CAPACITY, REFERRED TO THE SAME CONDITIONS Performance data are referred to operation with 30% of fresh air intake and same amount of air exhaust. (configuration CCK) Ta = indoor air temperature D.B. (50% of relative humidity) DB = dry bulb WB = wet bulb COP referred only to compressors kwt = Provided heating capacity (kw) with coils free of ice kwe = Compressor power input in kw Not all thermal yields take into account the heat dissipated by the fan motors 42 SMARTPACK BT09N004GB-08

43 Integrated heating capacities Air temperature external exchanger inlet C (D.B. / W.B.) -5 / / / 3.9 Others Heating capacity multiplication coefficient 0,89 0,88 0,94 1 The integrated heating capacity represents the real heating capacity considering the defrost cycles too. To obtain the integrated heating capacity multiply the heating performance value in kwt (shown in the heating performance tables) by the coefficients indicated in the table. DB = dry bulb WB = wet bulb In case of below zero external air temperature with a long period of heat pump operating mode it is necessary to help the evacuation of the water produced during the defrost cycle; this to avoid the formation of ice in the unit basement. Pay attention that the evacuation will not create inconveniences to things or persons. Performance in Heating SIZES TA ( C) D.B. CAPAC- ITY STEPS OUTDOOR AIR TEMPERATURE ( C) D.B./W.B. -7 / -8-5 / -6 0 / -1 2 / 1 7 / 6 12 / 11 kwt kwe COP kwt kwe COP kwt kwe COP kwt kwe COP kwt kwe COP kwt kwe COP 10 C1+C ,1 4,6 6,13 29,3 4,8 6,13 32,7 5,3 6,14 36,5 5,9 6,18 C ,5 2,1 8,35 19,5 2,2 8,76 15 C ,6 2,6 7,61 21,8 2,8 7,76 C1+C2 24,0 4,3 5,62 25,2 4,5 5,62 28,2 5,0 5,63 29,5 5,2 5,63 32,9 5,8 5,64 36,6 6,5 5,65 C ,7 2,1 7,52 17,6 2,2 7,95 19,5 2,4 8,28 18 C ,6 2,4 7,07 17,4 2,5 7,10 19,6 2,7 7,23 21,9 2,9 7,46 C1+C2 24,0 4,5 5,31 25,2 4,7 5,32 28,4 5,3 5,35 29,7 5,5 5,35 33,1 6,2 5,36 36,6 6,8 5,36 C ,1 2,1 7,14 15,8 2,2 7,32 17,6 2,3 7,68 19,5 2,4 7,98 20 C ,7 2,4 6,84 17,5 2,5 6,87 19,6 2,8 7,01 21,9 3,0 7,23 C1+C2 24,2 4,7 5,13 25,4 4,9 5,14 28,5 5,5 5,17 29,8 5,8 5,18 33,2 6,4 5,18 36,6 7,1 5,18 C ,1 2,2 6,95 15,8 2,2 7,09 17,6 2,4 7,42 19,5 2,5 7,68 22 C ,7 2,5 6,61 17,5 2,6 6,65 19,6 2,9 6,79 21,9 3,1 7,01 C1+C2 24,4 4,9 4,97 25,6 5,1 4,98 28,7 5,7 5,00 29,9 6,0 5,00 33,2 6,6 5,00 36,7 7,3 5,00 C1 13,0 2,1 6,12 13,6 2,2 6,30 15,2 2,3 6,67 15,9 2,3 6,78 17,6 2,5 7,05 19,5 2,7 7,27 25 C2 14,2 2,3 6,31 15,0 2,4 6,29 16,8 2,7 6,29 17,6 2,8 6,35 19,6 3,0 6,49 21,9 3,3 6,70 C1+C2 24,8 5,2 4,75 25,9 5,5 4,76 28,9 6,1 4,77 30,2 6,3 4,77 33,3 7,0 4,76 36,7 7,7 4,75 10 C ,7 3,1 7,93 27,7 3,4 8,17 C1+C ,0 5,5 5,77 33,4 5,7 5,84 37,3 6,3 5,94 41,4 6,9 5,97 C ,7 2,0 8,65 19,6 2,2 8,96 15 C ,9 3,4 7,33 27,7 3,7 7,52 C1+C2 27,8 5,4 5,14 29,1 5,6 5,21 32,5 6,1 5,36 33,9 6,3 5,40 37,7 6,9 5,45 41,7 7,6 5,46 C ,7 2,1 8,25 19,7 2,3 8,61 18 C ,5 3,2 6,74 22,5 3,3 6,81 24,9 3,6 6,98 27,8 3,9 7,16 C1+C2 28,2 5,7 4,95 29,4 5,9 5,01 32,8 6,4 5,12 34,2 6,6 5,14 37,9 7,3 5,18 41,8 8,1 5,19 C ,4 2,1 7,39 16,0 2,1 7,60 17,8 2,2 7,99 19,7 2,4 8,31 20 C ,6 3,1 6,39 21,6 3,3 6,55 22,6 3,4 6,66 25,0 3,7 6,76 27,9 4,0 6,93 C1+C2 28,3 5,9 4,82 29,6 6,1 4,87 32,9 6,6 4,96 34,3 6,9 4,98 38,0 7,6 5,01 41,9 8,4 5,02 C ,4 2,1 7,21 16,1 2,2 7,38 17,8 2,3 7,72 19,7 2,5 8,01 22 C ,7 3,2 6,22 21,7 3,4 6,36 22,7 3,5 6,43 25,1 3,8 6,55 27,9 4,2 6,70 C1+C2 28,5 6,1 4,68 29,7 6,3 4,72 33,1 6,9 4,79 34,5 7,2 4,81 38,1 7,9 4,85 42,0 8,7 4,85 C ,0 2,1 6,58 15,5 2,2 6,96 16,2 2,3 7,08 17,9 2,4 7,36 19,8 2,6 7,60 25 C2 19,0 3,2 5,92 19,8 3,3 5,99 21,9 3,6 6,09 22,7 3,7 6,12 25,2 4,0 6,25 28,0 4,4 6,39 C1+C2 28,7 6,4 4,48 29,9 6,6 4,51 33,3 7,3 4,57 34,7 7,6 4,59 38,3 8,3 4,62 42,2 9,1 4,63 10 C1+C ,1 6,2 6,49 42,5 6,4 6,61 47,7 7,1 6,74 52,0 7,8 6,70 C ,4 3,2 8,32 29,6 3,4 8,69 15 C ,4 3,2 8,32 29,6 3,4 8,69 C1+C2 33,7 5,9 5,68 35,7 6,1 5,80 40,6 6,7 6,02 42,5 7,0 6,08 47,3 7,7 6,15 52,1 8,5 6,14 C ,8 3,1 7,74 26,5 3,3 7,96 29,5 3,6 8,19 18 C ,8 3,1 7,74 26,5 3,3 7,96 29,5 3,6 8,19 C1+C2 34,9 6,3 5,55 36,5 6,5 5,62 40,8 7,1 5,75 42,6 7,4 5,78 47,2 8,1 5,83 52,1 8,9 5,84 C ,8 3,1 7,39 23,8 3,2 7,50 26,5 3,4 7,72 29,5 3,7 7,94 20 C ,8 3,1 7,39 23,8 3,2 7,50 26,5 3,4 7,72 29,5 3,7 7,94 C1+C2 35,3 6,5 5,44 36,9 6,7 5,48 40,9 7,4 5,57 42,7 7,6 5,59 47,2 8,4 5,64 52,1 9,2 5,65 C ,9 3,2 7,19 23,8 3,3 7,27 26,6 3,6 7,48 29,6 3,8 7,68 22 C ,9 3,2 7,19 23,8 3,3 7,27 26,6 3,6 7,48 29,6 3,8 7,68 C1+C2 35,4 6,7 5,27 37,0 7,0 5,31 41,1 7,6 5,39 42,8 7,9 5,41 47,3 8,7 5,45 52,2 9,5 5,47 C1 19,7 3,0 6,52 20,5 3,1 6,63 23,0 3,3 6,90 23,9 3,4 6,94 26,6 3,7 7,14 29,6 4,0 7,33 25 C2 19,7 3,0 6,52 20,5 3,1 6,63 23,0 3,3 6,90 23,9 3,4 6,94 26,6 3,7 7,14 29,6 4,0 7,33 C1+C2 35,5 7,1 5,04 37,1 7,3 5,07 41,3 8,0 5,14 43,0 8,3 5,16 47,5 9,1 5,20 52,3 10,0 5,21 BT09N004GB-08 SMARTPACK 43

44 SIZES 151 TA ( C) D.B. CAPAC- ITY STEPS OUTDOOR AIR TEMPERATURE ( C) D.B./W.B. -7 / -8-5 / -6 0 / -1 2 / 1 7 / 6 12 / 11 kwt kwe COP kwt kwe COP kwt kwe COP kwt kwe COP kwt kwe COP kwt kwe COP 10 C1+C ,4 7,6 6,14 48,5 7,8 6,24 54,1 8,4 6,41 60,2 9,3 6, C ,8 3,6 8,03 32,1 3,9 8,16 C ,6 4,2 7,72 36,3 4,7 7,81 C1+C2 39,4 7,4 5,32 41,5 7,6 5,45 46,7 8,2 5,71 48,9 8,4 5,79 54,4 9,2 5,92 60,2 10,1 5,97 C ,0 3,5 7,39 28,9 3,8 7,69 32,1 4,1 7,80 C ,9 4,0 6,94 29,2 4,1 7,10 32,6 4,5 7,33 36,4 4,9 7,51 C1+C2 39,6 7,7 5,14 41,7 7,9 5,25 46,9 8,6 5,47 49,1 8,9 5,53 54,6 9,7 5,64 60,2 10,6 5,68 C ,0 3,5 7,09 26,0 3,6 7,19 29,0 3,9 7,47 32,1 4,2 7,57 C ,0 4,1 6,77 29,3 4,2 6,91 32,7 4,6 7,11 36,4 5,0 7,27 C1+C2 39,9 7,9 5,03 41,9 8,2 5,12 47,1 8,9 5,31 49,3 9,2 5,37 54,7 10,0 5,46 60,2 11,0 5,50 C ,0 3,6 6,88 26,1 3,7 6,98 29,0 4,0 7,25 32,2 4,4 7,37 C ,1 4,3 6,60 29,4 4,4 6,72 32,7 4,7 6,90 36,4 5,2 7,04 C1+C2 40,4 8,2 4,92 42,4 8,5 5,00 47,4 9,2 5,16 49,4 9,5 5,20 54,8 10,4 5,28 60,3 11,3 5,32 C1 21,5 3,5 6,08 22,5 3,6 6,20 25,1 3,8 6,59 26,2 3,9 6,70 29,1 4,2 6,94 32,3 4,6 7,08 C2 24,1 4,1 5,84 25,3 4,2 6,02 28,3 4,5 6,36 29,5 4,6 6,44 32,8 5,0 6,59 36,4 5,4 6,73 C1+C2 41,2 8,6 4,78 43,0 8,9 4,83 47,7 9,7 4,94 49,7 10,0 4,97 54,9 10,9 5,04 60,3 11,9 5,08 Performance data are referred to operation with 30% of fresh air intake and same amount of air exhaust. (configuration CCK) Ta = Indoor air temperature D.B/W.B DB = dry bulb WB = wet bulb kwf = Cooling capacity in kw kwe = Compressor power input in kw kws = sensible cooling capacity (kw) Not all cooling yields take into account the heat dissipated by the fan motors 44 SMARTPACK BT09N004GB-08

45 Pressure drops of optional components The value of static pressure available on the supply and return duct is obtained by subtracting from the available net maximum pressure (see general table of technical data) the pressure drops of any accessories. SIZES CHW2 - Two-row hot water coil Pa CPHG - Hot gas post-heating coil Pa FES - Electronic filters Pa GD11 - Gas heating module with 2-stage control 35kW Pa GD12 - Gas heating module with 2-stage control 44kW Pa GD13 - Gas heating module with 2-stage control 53kW Pa GD14 - Gas heating module with 2-stage control 74kW GD15 - Gas heating module with 2-stage control 100kW GC01 - Condensing gas heating module with modulating control 35kW GC08 - Condensing gas heating module with modulating control 44kW Pa GC09 - Condensing gas heating module with modulating control 65kW Pa GC10 - Condensing gas heating module with modulating control 82kW Pa The values shown are to be considered approximate for units operating power in normal use with standard airflow rate. Handling electric fan performance - Standard airflow EXTERNAL STATIC PRESSURE (Pa) Standard airflow m3/h Standard airflow l/s Fan RPM rpm Total input kw 0,25 0,26 0,27 0,30 0,33 0,36 0,37 0,40 0,43 0,46 0,49 0,52 0,55 0,58 0,61 Standard airflow m3/h Standard airflow l/s Fan RPM rpm Total input kw 0,34 0,35 0,37 0,40 0,43 0,46 0,50 0,52 0,55 0,59 0,62 0,66 0,70 0,73 - Standard airflow m3/h Standard airflow l/s Fan RPM rpm Total input kw 0,39 0,40 0,43 0,47 0,52 0,56 0,61 0,64 0,69 0,74 0,79 0,84 0,90 0,96 - Standard airflow m3/h Standard airflow l/s Fan RPM rpm Total input kw 0,54 0,55 0,59 0,64 0,69 0,73 0,78 0,82 0,88 0,94 1, Standard airflow m3/h Standard airflow l/s Fan RPM rpm Total input kw 0,63 0,65 0,69 0,76 0,83 0,89 0,96 1,00 1,08 1,15 1,22 1,29 1,36 1,43 1,59 Standard airflow m3/h Standard airflow l/s Fan RPM rpm Total input kw 0,95 0,97 1,02 1,10 1,17 1,26 1,33 1,38 1,46 1,54 1,63 1,71 1,80 1,89 2,07 Standard airflow m3/h Standard airflow l/s Fan RPM rpm Total input kw 1,23 1,26 1,31 1,38 1,46 1,53 1,59 1,65 1,74 1,83 1,93 2,02 2,12 2,22 2,43 Standard airflow m3/h Standard airflow l/s Fan RPM rpm Total input kw 1,47 1,51 1,57 1,67 1,77 1,88 2,00 2,06 2,16 2,26 2,36 2,46 2,57 2,68 - The performance takes into account the pressure drops in the unit (pressure drops in handling coil, standard filters, etc.).. To determine the performance required of the fans, you must add to the usable static pressure desired the pressure drops of any accessories. BT09N004GB-08 SMARTPACK 45

46 Handling electric fan performance - Reduced airflow EXTERNAL STATIC PRESSURE (Pa) Standard airflow m3/h Standard airflow l/s Fan RPM rpm Total input kw 0,18 0,19 0,20 0,23 0,25 0,28 0,30 0,32 0,34 0,37 0,39 0,42 0,44 0,47 0,53 Standard airflow m3/h Standard airflow l/s Fan RPM rpm Total input kw 0,24 0,25 0,27 0,30 0,33 0,35 0,38 0,40 0,43 0,46 0,49 0,52 0,54 0,57 0,64 Standard airflow m3/h Standard airflow l/s Fan RPM rpm Total input kw 0,28 0,29 0,31 0,35 0,39 0,43 0,47 0,50 0,54 0,59 0,63 0,67 0,72 0,77 0,87 Standard airflow m3/h Standard airflow l/s Fan RPM rpm Total input kw 0,37 0,38 0,41 0,45 0,50 0,55 0,59 0,62 0,67 0,72 0,77 0,82 0,88 0,94 - Standard airflow m3/h Standard airflow l/s Fan RPM rpm Total input kw 0,43 0,44 0,48 0,54 0,60 0,65 0,71 0,75 0,81 0,87 0,93 1,00 1,06 1,13 1,26 Standard airflow m3/h Standard airflow l/s Fan RPM rpm Total input kw 0,62 0,64 0,68 0,75 0,81 0,88 0,95 1,00 1,07 1,14 1,20 1,28 1,35 1,42 1,58 Standard airflow m3/h Standard airflow l/s Fan RPM rpm Total input kw 0,74 0,76 0,80 0,86 0,93 1,00 1,08 1,30 1,21 1,29 1,37 1,45 1,53 1,62 1,79 Standard airflow m3/h Standard airflow l/s Fan RPM rpm Total input kw 0,91 0,94 1,00 1,09 1,17 1,25 1,33 1,38 1,47 1,56 1,65 1,75 1,85 1,95 2,17 The performance takes into account the pressure drops in the unit (pressure drops in handling coil, standard filters, etc.). To determine the performance required of the fans, you must add to the usable static pressure desired the pressure drops of any accessories. 46 SMARTPACK BT09N004GB-08

47 Handling electric fan performance - High airflow EXTERNAL STATIC PRESSURE (Pa) Standard airflow m3/h Standard airflow l/s Fan RPM rpm Total input kw 0,33 0,34 0,36 0,38 0,41 0,44 0,47 0,50 0,54 0,57 0,61 0,64 Standard airflow m3/h Standard airflow l/s Fan RPM rpm Total input kw 0,43 0,44 0,47 0,49 0,52 0,56 0,60 0,63 0,67 0,71 0,75 0,79 Standard airflow m3/h Standard airflow l/s Fan RPM rpm Total input kw 0,52 0,54 0,57 0,62 0,65 0,71 0,76 0,81 0,87 0,93 0,99 - Standard airflow m3/h Standard airflow l/s Fan RPM rpm Total input kw 0,67 0,69 0,73 0,78 0,84 0,88 1, Standard airflow m3/h Standard airflow l/s Fan RPM rpm Total input kw 0,89 0,92 0,97 1,04 1,12 1,17 1,25 1,33 1,41 1,49 1,57 1,66 Standard airflow m3/h Standard airflow l/s Fan RPM rpm Total input kw 1,15 1,18 1,23 1,32 1,40 1,45 1,54 1,63 1,72 1,81 1,90 1,99 Standard airflow m3/h Standard airflow l/s Fan RPM rpm Total input kw 1,89 1,92 2,00 2,08 2,17 2, Standard airflow m3/h Standard airflow l/s Fan RPM rpm Total input kw 1,82 1,85 1,92 2,03 2,14 2,25 2,33 2,45 2,58 2, The performance takes into account the pressure drops in the unit (pressure drops in handling coil, standard filters, etc.). To determine the performance required of the fans, you must add to the usable static pressure desired the pressure drops of any accessories. BT09N004GB-08 SMARTPACK 47

48 Exhaust electric fan performance Static pressure (return)(pa) 150 % of exhaust air 10% 20% 30% 40% 50% Standard airflow m3/h Standard airflow l/s Fan RPM rpm Total input kw 0,04 0,05 0,07 0,09 0,11 Standard airflow m3/h Standard airflow l/s Fan RPM rpm Total input kw 0,04 0,06 0,08 0,11 0,14 Standard airflow m3/h Standard airflow l/s Fan RPM rpm Total input kw 0,06 0,08 0,09 0,12 0,15 Standard airflow m3/h Standard airflow l/s Fan RPM rpm Total input kw 0,06 0,08 0,11 0,14 0,19 Standard airflow m3/h Standard airflow l/s Fan RPM rpm Total input kw 0,07 0,10 0,13 0,19 0,27 Standard airflow m3/h Standard airflow l/s Fan RPM rpm Total input kw 0,07 0,11 0,17 0,27 0,40 Standard airflow m3/h Standard airflow l/s Fan RPM rpm Total input kw 0,09 0,13 0,18 0,25 0,35 Standard airflow m3/h Standard airflow l/s Fan RPM rpm Total input kw 0,10 0,15 0,22 0,32 0,48 The percentage of exhaust air refers to the unit rated flow. Exhaust electric fans collect from the environment only the quantity of air that will be exhausted. The data refer to the return static pressure of 150 Pa, which usually occurs in the systems. 48 SMARTPACK BT09N004GB-08

49 Accessories EH - Electric elements This option is suggested for cold climates, allows the integration of heating capacity from the heat pump. The electrical heaters are placed before the treatment coil and perform the air preheating function, extending the operating range of the unit and helping quickly to reach the comfort in the room. Ideal for climate areas in applications with low outside temperature where it is required to active the heaters only for short time in the year. In these cases the resulting system simplification (no water supply) compensates the energy costs. The fins are made of aluminum, of suitable dimension to ensure high efficiency and maintain low power density on the surfaces to limit overheating. The low temperature of the heating elements increases the lifespan and limits the effect of air ionization. The electrical heating elements are managed by the controller with two power steps. Matching of the electric elements Size ,5 kw kw kw kw kw kW This option involves variation of the main electrical data of the unit. Water heating coil, electric heaters and fuel-operated heating module can not be installed at the some time. Operation field extension with electric heaters The minimum work temperature of the heat pump with electric heater change and depends on the series and the power of the electric heater. The minimum temperature is easily to reckon subtrahend the DT value (table following below) to the air temperature inlet on exchanger TM(D.M.) for standard unit, at the desired conditions. SIZES Airflow [m3/h] POWER ELECTRIC HEATERS / DELTA T [ C] 4,5 kw 6 kw 9 kw 12 kw 18 kw 24 kw ,1 8,1 12, ,9 6,6 9, ,2 7,8 10, ,3 6,5 8, ,1 6,8 10, ,2 5,6 8, ,4 6,7 8, ,7 5,6 7,4 The limits are meant as an indication and they have been calculated by considering: - general and non specific sizes, - standard airflow, - non-critical positioning of the unit and correct operating and maintenance of the unit, - operating at full load To verify the operation field of the operating units with percentages of external air, always calculate the Tm mixing temperature at the internal heat exchanger input. TM = INTERNAL EXCHANGER ENTERING AIR TEMPERATURE dry bulb measured temperature (D.B.=DRY BULB) TEXT = INLET AIR TEMPERATURE IN THE EXTERNAL EXCHANGER temperature measured with wet bulb (W.B.=WET BULB) 1. Operation at full load 2. Operation field of the unit equipped with electric elements With an outdoor air temperature between 10 C and 20 C install the following options: 2 rows hot water coil Combustion module Electrical panel anti-freeze protection BT09N004GB-08 SMARTPACK 49

50 CHW2 - Two-row hot water coil Option indicated for very cold climates, as it allows to heat up the area served. The exchanger comes with a thermostat for the antifreeze function, which is always active even when the unit is in stand-by, as long as it is operated electrically. If required, force the opening of the valve to the maximum value allowed to allow the air to pass through the exchanger and prevent frost from forming. The hot water coil allows the integration of the heat pump capacity, as being placed before the handling coil, it pre-heats the air, extending the operation limits of the unit. As alternative, it may operate in complete substitution of the heating capacity provided by the compressors. This is possible by setting a turning point, i.e. a temperature limit of the outdoor air below which use of the compressors is blocked, and the water coil is used as the sole resource. If the water coil provides pre-heating of the air, the control logic reduces its power to a preset value, which keeps the compressors from operating with condensation temperatures that are too high. If instead the water coil is used as the main resource (e.g. because the compressors are not available), the maximum power will be provided. Hot water coil pressure drop: AIR side The air side pressure drops are relative to the medium air temperature of 20 C and are to be added to the pressure drops due to ducts, terminal devices and any other component that causes a drop in working discharge head. QA [m3/h] = airflow Dp = pressure drop (Pa) Hot water coil pressure drop: WATER side Pressure drops on the water side are calculated considering an average water temperature of 65 C Qw [l/s] = water flow-rate Dp = pressure drop (Pa) The water flow rate must be calculated with the following formula Qw [l/s] =P / (4.186 x DT) P = Water coil heating capacity in KW DT = Temperature difference between inlet / outlet water This option reduces the available static pressure (supply air side). The component requires connection to the hot water plumbing system (to be provided for by the client). Water heating coil, electric heaters and fuel-operated heating module can not be installed at the some time. 50 SMARTPACK BT09N004GB-08

51 Performances of hot water coil (2 rows) Ti/To ( C) Size 80/65 70/55 60/40 80/65 70/55 60/40 80/65 70/55 60/ TM ( C) TM ( C) TM ( C) TM ( C) TM ( C) TM ( C) TM ( C) TM ( C) kwt kwt kwt kwt kwt kwt kwt kwt kwt Qo (m³/h) ,4 19,7 14,8 27,2 22,9 17,2 30,7 25,9 19, ,4 17,8 12,9 24,9 20,7 15,0 28,1 23,3 16, ,8 16,2 11,4 23,1 18,9 13,2 26,1 21,3 14, ,1 15,5 10,7 22,2 18,0 12,4 25,1 20,3 13, ,3 14,8 9,9 21,3 17,2 11,5 24,1 19,4 12, ,6 14,0 9,2 20,5 16,3 10,7 23,1 18,4 12,0 Qo (m³/h) ,9 22,6 17,0 31,2 26,3 19,6 34,1 28,7 21, ,6 20,4 14,8 28,6 23,7 17,1 31,2 25,9 18, ,8 18,7 13,1 26,5 21,6 15,1 29,0 23,7 16, ,9 17,8 12,2 25,5 20,6 14,1 27,9 22,6 15, ,1 16,9 11,4 24,5 19,7 13,1 26,8 21,5 14, ,2 16,1 10,5 23,4 18,6 12,1 25,7 20,4 13,2 Qo (m³/h) ,9 29,5 22,2 40,6 34,2 25,7 45,8 38,6 28, ,0 26,6 19,4 37,2 30,9 22,4 41,9 34,8 25, ,7 24,3 17,1 34,5 28,2 19,8 38,9 31,8 22, ,5 23,2 16,0 33,2 26,9 18,5 37,4 30,3 20, ,4 22,1 14,9 31,9 25,6 17,3 35,9 28,9 19, ,3 21,0 13,8 30,5 24,4 16,0 34,4 27,4 17,9 Qo (m³/h) ,6 33,4 25,1 45,9 38,7 29,0 49,4 41,6 31, ,3 30,1 21,9 42,1 34,9 25,3 45,3 37,6 27, ,7 27,6 19,4 39,0 31,9 22,4 42,0 34,4 24, ,4 26,3 18,1 37,5 30,4 20,9 40,4 32,8 22, ,1 25,0 16,9 36,0 28,9 19,4 38,8 31,2 20, ,8 23,8 15,6 34,6 27,5 18,0 37,2 29,6 19,3 Qo (m³/h) ,8 44,5 33,4 61,3 51,6 38,6 69,0 58,1 43, ,3 40,1 29,1 56,1 46,5 33,7 63,2 52,4 37, ,8 36,7 25,7 52,1 42,5 29,7 58,7 47,9 33, ,1 35,0 24,1 50,1 40,6 27,8 56,4 45,7 31, ,4 33,3 22,4 48,1 38,6 25,8 54,1 43,5 29, ,7 31,6 20,7 46,1 36,7 23,9 51,9 41,3 26,8 Qo (m³/h) ,7 51,1 38,3 70,2 59,1 44,0 74,3 62,5 46, ,6 46,1 33,3 64,3 53,3 38,4 68,1 56,4 40, ,5 42,1 29,4 59,6 48,7 33,9 63,1 51,6 35, ,5 40,2 27,5 57,3 46,4 31,7 60,7 49,2 33, ,6 38,2 25,6 55,0 44,2 29,4 58,3 46,7 31, ,6 36,3 23,7 52,8 42,0 27,2 55,9 44,4 28,7 Qo (m³/h) ,4 68,6 51,6 94,6 79,7 59,7 106,5 89,7 67, ,6 61,9 45,0 86,6 71,8 52,0 97,6 80,9 58, ,2 56,6 39,8 80,3 65,7 46,0 90,5 74,0 51, ,4 53,9 37,2 77,2 62,6 43,0 87,0 70,5 48, ,8 51,4 34,6 74,2 59,6 40,0 83,6 67,1 44, ,2 48,8 32,0 71,1 56,6 37,0 80,1 63,7 41,4 Qo (m³/h) ,0 77,5 58,2 106,5 89,7 67,0 112,8 95,0 70, ,3 69,9 50,7 97,6 80,9 58,4 103,3 85,7 61, ,2 63,9 44,8 90,5 74,0 51,6 95,9 78,3 54, ,2 61,0 41,9 87,0 70,5 48,2 92,2 74,7 50, ,2 58,0 38,9 83,6 67,1 44,8 88,5 71,0 47, ,2 55,1 36,0 80,1 63,7 41,4 84,9 67,5 43,8 TM = air inlet temperature of water coil ( C) Ti/To = water temperature inlet/outlet ( C) Qo = airflow (l/s) kwt = Provided heating capacity (kw) Thermal yields referred to the max. water coil capacity. The thermo regulator coke the 3-way modulating valve limiting the inlet air temperature at desired values. BT09N004GB-08 SMARTPACK 51

52 3WVM - Modulating 3-way valve To be combined with hot water coil (optional). It is managed by the built-in microprocessor via a 0-10V signal and allows the fully automatic control of the water coil. The valve with modulating actuator is provided already assembled and wired built-in the unit. Valve pressure drops Q [l/s] = water flow rate Dp = pressure drop This accessoriy has to be combined to the CHW2 - Two row hot water coil. Fuel-operated heating module (for size from 61 to 151) Option recommended for very cold weather, heats the air that needs to be introduced into the room. The energy modules described below are all made with welded sheet steel and tested in line with European standards. They can be easily inspected for normal cleaning and maintenance. The modules consist of an AISI 430 stainless steel combustion chamber and an AISI 304L stainless steel exchanger on the air line: these are both important materials suitable to operate across a wide operating range in terms of condensation and low temperatures. The combustion chamber is cylindrical with inverted flame technology. It has wide heat exchange surfaces and allows for low thermal loads. Thanks to these specific features the module can be used with very low input air temperatures and can be combined with burners with a very variable heating capacity. It is possible to use burners that employ various fuels: natural gas or LPG. All the chambers are designed to ensure top efficiency in terms of thermal exchange with the air and maximum duration Water heating coil, electric heaters and fuel-operated heating module can not be installed at the some time. 52 SMARTPACK BT09N004GB-08

53 GC - Condensing gas heating module and modulating control Option consisting of a combustion chamber and condensation burner with modulating control. It is available in various capacities and heats the environment served. The module can be chosen to integrate the heat pump or as an alternative to it. In this case, its heating capacity must be at least equal to the capacity envisioned in the project. Thanks to the condensation technology with pre-mix and extremely efficient modulation (up to 105% depending on the lower heat value), consumption is very contained and considerably reduced during operation at partial load. The burner has low polluting emissions (NOx lower than 80mg/kWh) in accordance with Class 5 of European standard EN 676. The module is supplied ready for use and is an essential part of the unit. The gas module presence needs the horizontal supply. The heating module includes: hot air generator with condensation and integrated modulating adjustment, powered with methane gas kit for transformation of power with liquefied petroleum gas (LPG) kit of steel chimney for exhaust fumes All the control and safety devices Gas connection diagram 1. GAS COCK 2. GAS FILTER (LARGE SECTION) 3. ANTI-VIBRATION JOINT 4. GAS FILTER (SMALL SECTION) 5. SAFET GAS SOLENOID VALVE 6. PRESSURE STABILISER 7. MAIN GAS BURNER SOLENOID VALVE 8. PILOT BURNER GAS SOLENOID VALVE Gas use features 35kW 44kW 65kW 82kW NOx class Val 5 min max min max min max min max Nominal heating capacity kw Efficiency Hi (P.C.I.) % Efficiency Hs (P.C.S.) % Max produced condensation l/h Carbon monoxide CO (0% di O 2 ) ppm <5 <5 <5 <5 Nitrogen oxide - NOx (0% di O 2 ) 41 mg / k Wh 23 ppm 35 mg / k Wh 20 ppm 40 mg / k Wh 23 ppm Chimney available pressure Pa mg / k Wh 19 ppm Gas connection diameter GAS UNI ISO 7/1-3/4 UNI ISO 7/1-3/4 UNI ISO 7/1-3/4 UNI ISO 7/1-1 Fume chimney diameter mm Matching of the condensing gas heating module Size GC01 35 kw - - GC08 44 kw - - GC09 65 kw GC10 82 kw This option reduces the available static pressure (supply air side). The component requires gas supply (gas connections to be made by the Customer). The location of the unit and the fume drain mode mode must comply with laws and standards in force in the Country of use. The assembly of the chimney kit must be performed on site by the Customer. According to specific requirements of installation, the chimney length can be increased by means of appropriate joints and fittings (not supplied by Clivet). The maximum length of the chimney is 16 m, in case of fully straight development of the ducts. For further details, refer to the Installation, use and maintenance manual. BT09N004GB-08 SMARTPACK 53

54 GD - Gas heating module with 2-stage control Option consisting of a combustion chamber and burner with 2-stage control. It is available in various capacities and heats the environment served. The module can be chosen to integrate the heat pump or as an alternative to it. In this case, its heating capacity must be at least equal to the capacity envisioned in the project. The burner has low polluting emissions (NOx lower than 80mg/kWh) in accordance with Class 5 of European standard EN 676. The unit logic controls the module and comunicates with the microprocessor control integrated in the burner. The module is supplied ready for use and is an essential part of the unit. The gas module presence needs the horizontal supply. The heating module with burner includes: hot air generator with two capacity step control powered with methane gas kit for transformation of power with liquefied petroleum gas (LPG) kit of steel chimney for exhaust fumes All the control and safety devices Gas connection diagram 1. GAS COCK 2. GAS FILTER (LARGE SECTION) 3. ANTI-VIBRATION JOINT 4. GAS FILTER (SMALL SECTION) 5. SAFET GAS SOLENOID VALVE 6. PRESSURE STABILISER 7. MAIN GAS BURNER SOLENOID VALVE 8. PILOT BURNER GAS SOLENOID VALVE Gas use features 35kW 44kW 53kW 74kW 100kW NOx class Val 5 min max min max min max min max min max Rated thermal input kw 27,5 34,8 35,5 44,0 42,4 52,2 60,0 73,5 81,8 100,0 Efficiency Hi (P.C.I.) % 93,7 91,8 93,2 91,3 93,2 91,3 93,7 91,8 93,9 92,3 Efficiency Hs (P.C.S.) % 84,3 82,6 83,8 82,2 84,7 83,0 84,3 82,6 84,5 83,1 Available flue pressure Pa Gas connection diameter GAS UNI ISO 228/1-G 3/4 UNI ISO 228/1-G 3/4 UNI ISO 228/1-G 3/4 UNI ISO 228/1-G 3/4 UNI ISO 228/1-G 3/4 Exhaust pipe diameter mm Matching of the condensing gas heating module with 2-stage control Capacity GD11 35 kw - - GD12 44 kw - - GD13 53 kw - - GD14 74 kw GD kw This option reduces the available static pressure (supply air side). The component requires gas supply (gas connections to be made by the Customer). The location of the unit and the fume drain mode must comply with laws and standards in force in the Country of use. The assembly of the chimney kit must be performed on site by the Customer. According to specific requirements of installation, the chimney length can be increased by means of appropriate joints and fittings (not supplied by Clivet). For further details, refer to the Installation, use and maintenance manual. Electric elements, 2-row hot water coil, Combustion heating module and Energy recovery from food refrigeration cannot be assembled simultaneously. 54 SMARTPACK BT09N004GB-08

55 CTEM - Temperature control with built-in probes This option makes it possible to measure the ambient temperature directly on the airflow entering the unit. The automatic thermal regulation is done using the on-board probes, whereas the probes on the remote control are inhibited. CSOND - Humidity and temperature control with built-in probes This option makes it possible to measure the temperature and humidity ambient directly on the airflow entering the unit. The automatic thermal regulation is done using the on-board probes, whereas the probes on the remote control are inhibited. CPHG - Hot gas post-heating coil This option is recommended during the summer when the intakr air dehumidification is required. The airflow to enter the room may contain a higher level of humidity than desired. The dehumidification process is used to reduce it. The airflow is first cooled in the handling coil with separation of condensation. It is then freely re-heated to maintain the desired condition of comfort in the served room. The re-heat coil is located behind the handling coil and is activated by diverting a flow of hot refrigerant gas downstream from the compressors through the action of a dedicated solenoid valve. The process starts operating based on the humidity set-point established by the user. With respect to traditional devices, such as electrical electric elements or hot water coils, use of the re-heat coil does not consume any extra energy. It also lowers refrigerant condensation temperature, which provides two positive effects: power absorbed by the compressors is considerably reduced, and at the same time, cooling capacity is increased, resulting in greater efficiency (EER). The measurement of the ambient humidity is done using the electronic ambient control wall unit with a humidity probe (supplied standard with the unit). This option reduces the available static pressure (supply air side). 1 Outdoor air and humidity / temperature probe 2 Chilled and dehumidified air in the internal exchanger (evaporator) 3 Automatic hot gas pump valve 4 Air treated by the post-heating exchanger 5 External exchanger (condenser) Indicative scheme - not in scale BT09N004GB-08 SMARTPACK 55

56 Performances of post-heating coil hot gas re-heating OUTDOOR AIR TEMPERATURE ( C) kwt kwt kwt kwt kwt kwt kwt kwt kwt kwt kwt kwt kwt kwt kwt Qo (m³/h) ,5 5,9 6,5 7,0 7,6 6,0 6,4 7,1 7,6 8,3 6,4 6,9 7,6 8,1 8,9 12 5,1 5,5 6,1 6,5 7,2 5,5 6,0 6,7 7,1 7,8 5,9 6,4 7,1 7,6 8,4 14 4,6 5,1 5,7 6,1 6,8 5,0 5,5 6,2 6,7 7,4 5,4 5,9 6,6 7,1 7,9 Ta ( C) 16 4,2 4,6 5,3 5,7 6,3 4,6 5,0 5,7 6,2 6,9 4,9 5,4 6,1 6,6 7,4 18 3,8 4,2 4,9 5,3 5,9 4,1 4,6 5,3 5,7 6,4 4,4 4,9 5,6 6,1 6,9 20 3,4 3,8 4,4 4,9 5,5 3,7 4,1 4,8 5,3 6,0 3,9 4,4 5,1 5,6 6,4 Qo (m³/h) ,9 6,4 7,1 7,5 8,2 6,4 6,9 7,7 8,2 8,9 6,7 7,3 8,0 8,6 9,4 12 5,5 5,9 6,6 7,1 7,8 5,9 6,4 7,2 7,7 8,4 6,2 6,7 7,5 8,0 8,8 14 5,0 5,5 6,1 6,6 7,3 5,4 5,9 6,7 7,2 7,9 5,7 6,2 7,0 7,5 8,3 Ta ( C) 16 4,6 5,0 5,7 6,2 6,8 4,9 5,4 6,2 6,7 7,4 5,2 5,7 6,5 7,0 7,8 18 4,1 4,6 5,2 5,7 6,4 4,4 4,9 5,7 6,2 6,9 4,7 5,2 6,0 6,5 7,3 20 3,7 4,1 4,8 5,2 5,9 4,0 4,4 5,2 5,7 6,4 4,1 4,7 5,4 6,0 6,7 Qo (m³/h) ,8 8,4 9,3 9,9 10,8 8,4 9,1 10,1 10,8 11,8 9,0 9,7 10,8 11,5 12,6 12 7,2 7,8 8,7 9,3 10,2 7,8 8,4 9,4 10,1 11,1 8,3 9,0 10,1 10,8 11,8 14 6,6 7,2 8,1 8,7 9,6 7,1 7,8 8,8 9,4 10,4 7,6 8,3 9,3 10,1 11,1 Ta ( C) 16 6,0 6,6 7,5 8,1 9,0 6,5 7,1 8,1 8,8 9,8 6,9 7,6 8,6 9,4 10,4 18 5,4 6,0 6,9 7,5 8,4 5,8 6,5 7,4 8,1 9,1 6,2 6,9 7,9 8,6 9,7 20 4,8 5,4 6,3 6,9 7,8 5,2 5,8 6,8 7,5 8,4 5,5 6,2 7,2 7,9 9,0 Qo (m³/h) ,3 9,0 10,0 10,6 11,6 9,0 9,7 10,8 11,5 12,6 9,4 10,1 11,2 12,0 13,1 12 7,7 8,3 9,3 10,0 11,0 8,3 9,0 10,1 10,8 11,9 8,6 9,4 10,5 11,2 12,3 14 7,0 7,7 8,7 9,3 10,3 7,6 8,3 9,4 10,1 11,1 7,9 8,6 9,7 10,5 11,6 Ta ( C) 16 6,4 7,0 8,0 8,7 9,6 6,9 7,6 8,7 9,4 10,4 7,2 7,9 9,0 9,7 10,8 18 5,7 6,4 7,4 8,0 9,0 6,2 6,9 8,0 8,7 9,7 6,4 7,2 8,3 9,0 10,1 20 5,1 5,7 6,7 7,4 8,3 5,5 6,2 7,2 8,0 9,0 5,7 6,4 7,5 8,3 9,4 Qo (m³/h) ,7 14,7 16,2 17,3 18,9 14,9 16,0 17,7 18,8 20,5 15,8 17,1 18,9 20,1 21, ,7 13,7 15,2 16,3 17,8 13,8 14,9 16,6 17,7 19,4 14,7 15,9 17,7 18,9 20, ,6 12,7 14,2 15,3 16,8 12,7 13,8 15,4 16,6 18,3 13,5 14,7 16,5 17,7 19,5 Ta ( C) 16 10,6 11,7 13,2 14,2 15,8 11,6 12,7 14,3 15,5 17,2 12,3 13,5 15,3 16,5 18,4 18 9,6 10,7 12,2 13,2 14,8 10,5 11,6 13,2 14,4 16,1 11,2 12,4 14,1 15,4 17,2 20 8,6 9,7 11,2 12,2 13,8 9,4 10,5 12,1 13,3 15,0 10,0 11,2 13,0 14,2 16,0 Qo (m³/h) ,8 15,9 17,6 18,7 20,4 16,0 17,2 19,0 20,3 22,1 16,5 17,7 19,6 20,9 22, ,7 14,8 16,5 17,6 19,3 14,8 16,0 17,8 19,1 20,9 15,3 16,5 18,4 19,7 21, ,6 13,7 15,4 16,5 18,2 13,6 14,8 16,6 17,9 19,7 14,0 15,3 17,2 18,4 20,3 Ta ( C) 16 11,5 12,6 14,3 15,4 17,1 12,4 13,6 15,4 16,7 18,5 12,8 14,1 15,9 17,2 19, ,4 11,5 13,2 14,3 16,0 11,3 12,5 14,3 15,5 17,3 11,6 12,9 14,7 16,0 17,9 20 9,3 10,4 12,1 13,2 14,9 10,1 11,3 13,1 14,3 16,1 10,4 11,6 13,5 14,7 16,6 Qo (m³/h) ,2 20,6 22,8 24,3 26,5 20,8 22,4 24,8 26,4 28,8 22,2 23,9 26,4 28,1 30, ,8 19,2 21,4 22,8 25,1 19,3 20,8 23,2 24,8 27,2 20,5 22,2 24,7 26,4 29, ,3 17,8 19,9 21,4 23,6 17,7 19,3 21,6 23,2 25,6 18,9 20,6 23,1 24,8 27,3 Ta ( C) 16 14,9 16,3 18,5 20,0 22,2 16,2 17,7 20,1 21,7 24,1 17,2 18,9 21,4 23,1 25, ,5 14,9 17,1 18,5 20,7 14,6 16,2 18,5 20,1 22,5 15,6 17,2 19,8 21,4 24, ,1 13,5 15,6 17,1 19,3 13,1 14,6 17,0 18,5 20,9 13,9 15,6 18,1 19,8 22,3 Qo (m³/h) ,5 22,1 24,4 26,0 28,4 22,2 23,9 26,4 28,1 30,7 22,9 24,6 27,2 29,0 31, ,0 20,5 22,9 24,4 26,8 20,5 22,2 24,7 26,4 29,0 21,2 22,9 25,5 27,3 29, ,5 19,0 21,3 22,9 25,3 18,9 20,6 23,1 24,8 27,3 19,5 21,2 23,8 25,5 28,2 Ta ( C) 16 15,9 17,5 19,8 21,4 23,7 17,2 18,9 21,4 23,1 25,7 17,7 19,5 22,1 23,8 26, ,4 15,9 18,2 19,8 22,2 15,6 17,2 19,8 21,4 24,0 16,0 17,8 20,4 22,1 24, ,9 14,4 16,7 18,3 20,6 13,9 15,6 18,1 19,8 22,3 14,4 16,1 18,7 20,4 23,0 Ta = leaving air temperature from the handling coil and entering the post-heating coil Qo = airflow (l/s) kwt = Heating capacity (kw) The post-heating coil is powered by the hot gas, drawn by the supply pipe. As the condensation hot gas temperature is linked to the outdoor air temperature, the indicative potentials of the post-heating coil are expressed according to the outside air temperature. The performances of the hot gas post-heating coil refer to the cooling operation of the unit at full load. 56 SMARTPACK BT09N004GB-08

57 HSE - Immersed electrodes steam humidifier This device is suitable for winter operation when humidity is required for the ambient without cooling the airflow. The automatic modulating control allows you to adjust the steam production and its relative management costs to the actual requirements. Available in different capacities, the device is suitable for using soften water having medium conductivity and is equipped with: water load solenoid valve, disposable cylinder, water drainage solenoid valve, distribution nozzle, control electronic board to verify the water level, conductivity, anti-foam device, water drainage manual forcing. To ensure maximum hygiene, the cylinder can automatically empty after a determined period of stand-by. The device is equipped with anti-freeze function with automatic activation. The accessory is installed inside the unit and is connected to the electrical panel of the machine. The measurement of the ambient humidity is done using the electronic ambient control wall unit with a humidity probe (supplied standard with the unit). Matching of the immersed electrode and steam humidification module Size kg/h 5 kg/h kg/h This option involves variation of the main electrical data of the unit. This accessory requires connection to a water supply network and discharge water circuit with adeguate frost protection. Requires its own power supply and have to be connected to the unit. Installation and wiring to customer care. PCOS - Supply constant airflow The original technology used eliminates the need for on-site calibration of traditional fans, as well as the time that would be required and the associated costs. The required flow rate is set on the display and maintained automatically by the unit, which controls the speed of the ventilating sections. During the installation and start-up phase, the unit controls to the effective pressure drop in the air distribution and diffusion system. Furthermore, during its entire operating life, the progressive fouling of the air filters is automatically compensated for thanks to this system. PVAR - Variable airflow Option that enables the automatic variation of the treated airflow, according to the effective load. This allows great energy saving, thanks to the reduction of ventilation electrical consumptions. The minimum flow value equal to 60% of the nominal one occurs during the partial load and satisfied set-point operation. As a result, the supply temperature remains unchanged either during full load operation or partial load operation. The device also includes the functions of configuration of the nominal flow directly on the unit display and its automatic control to compensate the dirtying of the air filters. This option already includes the device for controlling the airflow, called PCOS - Supply constant airflow, which must not be selected When sizing the distribution and diffusion of the air, keep into consideration that the airflow varies from the nominal value (at full load, in FREE-COOLING mode and during the defrosting phases) to the minimum value, equal to 60% of the nominal flow (at partial load) This option can not be matched to the unit in constant capacity version BT09N004GB-08 SMARTPACK 57

58 FCE - Enthalpic FREE-COOLING This option is used to reduce energy consumption and compressor wear by using the outdoor air as an energy source to lower the thermal loads and ambient humidity. The temperature control compares the temperature and the humidity between the outdoor environment and the served environment and decides the amount of renewal air needed to guarantee the correct temperature and humidity set-points in the environment, keeping the compressors shut off The measurement of the ambient temperature and humidity is done using the electronic ambient control wall unit with a humidity probe (supplied standard with the unit). CREFP - Fan consumption reduction device of external section at variable speed (phase cutting). The device makes it possible to control the external axial fans, adjusting their speed of rotation based on the condensation pressure. When outdoor air temperature is low, a minimum airflow rate is required to hold down the condensation pressure. Therefore, at low fresh air temperatures, fan rotation speed is reduced, resulting in reduced energy consumption (low temperature device). In certain applications where the external temperature is low and it is not possible to draw in fresh air to cool the served room (FREE-COOLING), the phase cut device allow the unit to operate correctly. In heat pump mode, this device reduces the speed of rotation of the fans when external air temperatures are high (high temperature device). PSAF - Clogged filter differential pressure switch air side It allows to detect and signal (by an appropriate warning) the reaching of the max. level of air filter clogging. The unit handler receives an indication when to perform the necessary maintenance of the filters. The detecting device is installed in the unit and it is already connected to the unit electrical panel and pre-calibrated in the factory. The calibration can be modified by the qualified assistance centre during the start-up. FES - H10 high efficiency electrostatic air filter Class H10 high-efficiency filters are additional filtering components with an active electrostatic system. Solid or liquid particles contained in the airflow are trapped by an electrical field. The airflow through the filter is affected in two main phases: release of an electrical charge to the particles (ionization), and capture of the particles by electrostatic deposit (captivation). Periodically the filters must be cleaned to remove the captured particles (washing). The filters are able of trapping fine dusts, some types of viruses and micro-organisms (anti-bacterial action) with very modest pressure drops. The range of use normally includes fine powders that measure less than 1 µm. Typical pollutants are cigarette smoke ( µm), oily vapours (1 0.2 µm), PM10 (particles < 10 µm), PM2.5 (particles < 2.5µm), PM1 (particles < 1µm), etc. The clogging of the electric filter is signalled by a sensor that allows to schedule the periodic maintenance, which can be easily performed by washing in water with a special non-aggressive detergent for aluminium. The greater initial cost, as compared to a traditional pocket filter, is recovered quickly since the electrostatic filters last for the entire life of the unit, whereas pocket filters require periodic replacement. This option reduces the available static pressure (supply air side). The electronic filters are not suited to filter water steams also in low concentration, oily vapours, large amounts of dust, shavings, powdered iron filings and residues generally, gas. The electronic filters have to absolutely avoid all the following substances: powdered metals also fine, smoke produced by combustion of organic materials and not, flour dusts, dusts and vapours of explosive environments. 58 SMARTPACK BT09N004GB-08

59 PAQC - Air quality probe for the CO2 rate check This option is recommended for areas with highly variable crowding. The probe measure the amount of CO2 in the environment and initiates a 0/10V proportional signal. Based on the received signal, the controller regulates amount of outdoor air necessary for IAQ ventilation and thus minimises energy used for treatment. The probe is installed and wired built-in the unit and is located in the return air duct of the unit. PAQCV - Air quality probe for the CO2 and VOC rate check The option is recommended in areas with tobacco smoke, formaldehyde (from solvents, deodorants, glues, paints, detergents, food preparation, etc. The probe measures the rate of CO2 and VOC (volatile organic compounds) in the environment and initiates a 0/10V proportional signal. Based on the received signal, the controller regulates amount of outdoor air necessary for IAQ ventilation and thus minimises energy used for treatment. The probe is installed and wired built-in the unit and is located in the return air duct of the unit. AGQ - Electrical panel anti-freeze protection This option is necessary for very cold climates, where the outdoor air temperature can be between -10 C and -20 C. It includes self-regulating temperature maintaining resistances which are able to protect the electrical panel against frost guaranteeing that it functions correctly. This option involves variation of the main electrical data of the unit. This accessory operates even when the unit is switched off provided that the power supply is maintained active and the unit continues to be connected. It is necessary to make precautions against build up of snow and ice in front of the exhaust and outdoor air inlet locations. PFCC - Power factor correction capacitors (cosfi > 0.95) The component is necessary to lower the phase difference between current and voltage in the electromagnetic components of the machine, such as asynchronous motors. By re-phasing it is possible to reduce the intensity of the line current by reducing a part of the power of the mains (reactive power). This leads to an economic benefit which the energy provider grants to the final user. The component makes it possible to bring the cosfi power factor to values which on average are greater than The device is installed and wired built-in the unit. MOB - RS485 Serial port with Modbus protocol. It allows the serial connection to supervision systems, using Modbus as the communication protocol. It allows the access to the complete list of operating variables, controls and alarms. The device is installed and wired built-in the unit. The total length of each serial line do not exceed 1000 meters and the line must be connected in bus typology (in/out) LONW - LonWorks serial communication module It allows the serial connection to supervision systems, using LonWorks as the communication protocol. It allows access to a list of operating variables, control and alarms compliant with the Echelon standard. The device is installed and wired built-in the unit. The total length of each serial line do not exceed 1000 meters and the line must be connected in bus typology (in/out) BT09N004GB-08 SMARTPACK 59

60 PM - Phase monitor The phase monitor allows verifying the proper phase connection and their unbalance in the units, which are powered by a three-phase system. The monitor communicates with the control circuit and orders the switch-off of the unit, should one of the following cases occur: improper phase connection, the limit value referring to the unbalance between the phases is exceeded, over/undervoltage for a certain amount of time. Once the line conditions are restored, the unit is reactivated manually. The device is installed and wired built-in the unit. MHP - High and low pressure gauges Allows the pressure measurement of the refrigerant to the compressor intake and supply, making the inspection of these parameters easier for the technicians involved in the management of the unit. The two liquid pressure gauges and corresponding pressure sockets are installed on the machine in an easily accessible location. PGFC - Finned coil protection grilles This accessory is used to protect the external coil from the accidental contact with external things or people. Ideal for installation in places where persons can pass from, such as car parks, terraces, etc. The device is installed and wired built-in the unit. CCCA - Copper / aluminium coil with acrylic lining Coils with copper pipes and aluminium fins with acrylic lacquering. Can be used in settings with moderately low aggressive low saline concentrations and other chemical agents. Attention! - Cooling capacity variation -2.7% - variation in compressor power input +4.2% - operating range reduction -2.1 C CCCA1 - Copper/aluminum coil with Fin Guard (Silver) treatment A treatment which offers an optimal thermal exchange and guarantees and protects the finned coil exchangers from corrosion over time. Can be used in settings with very aggressive saline concentrations and other chemical agents in the air thus maintaining the performance of the coils over time. CCCC - Copper / copper coil Coils with copper pipes, copper fins and brass structure. Can be used in settings with moderately aggressive saline concentrations and other chemical agents. The options are available for: external coil internal coil hot water coil re-heating coil This option is not suitable for application in sulphuric environments Option available on request 60 SMARTPACK BT09N004GB-08

61 Accessories separately supplied CLMX - Clivet Master System CLIVET MASTER SYSTEM is the ideal system for the remote and centralised control of the CLIVETPack and SMARTPack climate control units. It can manage up to eight units connected with a serial connection. It includes a box for wall installation, as well as the electronic power supply and serial communication devices, a controller with a touch-screen display and a USB port at the front used to export the alarm log. The device allows to easily and intuitively access all the information on the status of the system and the climate control units. It also provides: auto-detection of units connected, setting all unit parameters, setting of the zone set-point unit stata display, control and management of the alarms and creation of an alarm log, hourly operation scheduling (ON / OFF / ECO), rotation of the units even for individual areas, temperature, humidity and air quality trends automatic language management (English, Italian, French, Spanish and German) The component must be combined with the RS485 serial port option with Modbus protocol built-in of each rooftop Operating temperature from 0 C to 50 C with relative humidity lower than 90% without condensate P-MATIC - Clivet supervisory system Clivet P-MATIC is a Clivet supervision system that allow to schedule and manage all the installed Clivet conditioning units, optimizing their functional operating and the others systems in order to reduce the energy consumption. The software navigation is easy and intuitive, thanks to the tridimensional graphic interface. It is so possible to change complex activities of system operating into simple and reliable activities made by the Customer. Clivet P-MATIC let to visualize the maintenance status of the conditioning units, valuate and manage the alarms. The user operates on the system, through the supervision Workstation or the user interface display on the PLC (Programmable Logic Controller), according to the controller installation component. The data Exchange between the Workstation, the units and the remote control electronic devices is performed by serial/bus network on RS485 standard communication protocol, or by LAN network (Local Area Network) Ethernet TCP/IP. The integrated remote monitoring software allows accessing to the Clivet on-line technical assistance services. For further information refer to the technical documentation. AMRX - Rubber anti-vibrating dampers The rubber antivibration mounts must be fixed to designated housings on the support stringers and are used to dampen vibrations produced by the unit, thereby reducing the noise transmitted to the support structures. They are flexible bodies able to dampen axial and tangential stresses and maintain the mechanical properties almost constant over time thanks to high resistance materials of which they are made. Alternatively, rubberized neoprene anti-vibration strips may be used on the unit longitudinal support members (not supplied by Clivet) BT09N004GB-08 SMARTPACK 61