Our mission. To be the best Greek company among the most developing European companies in Safety & Security Electronic Systems industry.

Size: px

Start display at page:

Download "Our mission. To be the best Greek company among the most developing European companies in Safety & Security Electronic Systems industry."

Augusta Waters
5 years ago
Views:

2 Our mission To be the best Greek company among the most developing European companies in Safety & Security Electronic Systems industry.

3 Our history Olympia Electronics was established in 1979 by Nikolaos Lakasas and Panagiotis Arvanitidis. It is one of the oldest and largest Electrical & Electronic manufacturers in Greece The company employs over than 165 people. In 1981 Olympia Electronics entered in emergency lighting manufacturing process. In 1985 Olympia Electronics entered in fire alarm manufacturing process. In 1986 became the dominant firm in Greece as concerns Electronic Safety and Security industry

4 Our history In 1989 we are starting our export activities During 1990 and 1999 the company expands its products (9 families) while is remaining the dominant firm in the market. During 1999 and 2007 the company is awarded by many institutions for its successful & innovative business activities. On February 2005 Olympia Electronics gained the EFQM (European Foundation Quality for Management) recognition In 2014 the company inducts two new product families: emergency lighting and fire detection systems for marine applications. Today Olympia Electronics manufactures six main product categories and exports in 72 countries worldwide.

Our products We produce: Emergency lighting Emergency lighting for marine applications Fire Alarm Systems (conventional & analogue addressable) Fire Alarm Systems for marine applications Gas

5 Our products We produce: Emergency lighting Emergency lighting for marine applications Fire Alarm Systems (conventional & analogue addressable) Fire Alarm Systems for marine applications Gas detection systems Security Alarm systems Nurse Call Systems Access Control (Card Switches) Movement detectors Electronic Room Thermostats Electronic Sirens Electrical fly traps (for HACCP systems) Electronic Elevator Systems (customised)

6 Quality We are certified for ISO 9001 by TUV, OHSAS 18001:2007 by Lloyd s Register, ISO 14000:2004 by Bureau Veritas Our products are certified by LLOYD S, BSI, TUV, VDS, LPCB, EVPU We have many local approvals like ELOT, ANKO, Gost, etc. We fulfil the European Norms i.e. EN , EN 54 etc. All our products have CE marking, DoC, Reach & RoHS. Since 2011 the company holds the bee bronze award of the European Business Ethics Network.

7 Our philosophy We produce high quality, state of the art and innovative products in a competitive price level. We are Easy To Do Business With company. Our orientation is a customer-centric one

8 Competitive advantage

9 SWOT analysis

10 Olympia Electronics strengths Leading position in the Greek market of emergency lighting and fire alarm systems. Complete product range. Targeting flexibility. Specific know-how for the lift industry concerning both software and electronics. OE already produces in an OEM basis for big global groups in the electronics, safety and security industry.

11 Olympia Electronics strengths Strong branding in the domestic market. - Synergies High market penetration in Greece. Increasing international orientation. Today, exports represent 70% of our sales. Strategic geographical position. Commitment to innovation and highly specialized human resources with capabilities for fast and effective new product development.

12 Our sales network (domestic) We are the dominant firm in the Greek market (more than 50% of the market share in emergency lighting and fire alarm) We have a branch office in Athens We cover all Greece with 12 well trained salesman

13 Our sales network (exports) Exports in 72 countries: European Union (71% of our exports) East European countries and Russia Middle East & Gulf countries Africa U.S.A (just started)

14 Our Sales Policy Our trading policy is a co-ordinated one. Our strategy is oriented to have a full efficiency to our distribution services. We promote our products through Electrical wholesalers, Consulting engineers, Security and fire equipment companies.

15 Project s references The vast majority of Olympic games Athens 2004 projects Athens Metro Prefecture of Vienna Expo Lisbon Portugal central building Metro Schwerin Germany Hilton & Sheraton Dubai Public Electricity Authority Dubai

Reference list Vessel Company Type Aegean Paradise African Juniper Ariadne Blue Galaxy Blue Horizon Blue Star 2 Blue Star 2 Naxos Blue Star Delos Blue Star Naxos Blue Star Paros Blue Star Patmos Blue

16 Reference list Vessel Company Type Aegean Paradise African Juniper Ariadne Blue Galaxy Blue Horizon Blue Star 2 Blue Star 2 Naxos Blue Star Delos Blue Star Naxos Blue Star Paros Blue Star Patmos Blue Star1 Crete I Crete II Decameron Diagoras Eleni K Eleytherios Venizelos Elyros Galaxy Glikofilousa Golden Iris Hellenic Spirit Horizon Kiveli KK Perintis Kydon Leo Morocco Star New Hellas Olympic Champion Prevelis Superfast II Superfast XI Superfast XII Talos V.Kornaros Hainan Cruises/Etstur Sea Vision Hellenic Seaways Blue Star Blue Star Blue Star Blue Star Blue Star Blue Star Blue Star Blue Star Blue Star Anek Lines Anek Lines - Blue Star Kaiafas shipping Anek Lines Anek Lines Blue Star Theodoropoulos Mano Maritime LTD. Anek Lines Blue Star Monford management LTD. - Anek Lines Technomar Superfast - Anek Lines Anek Lines Superfast Superfast Superfast Creta Cargo Lane Lines Cruise Ship Bulk Carrier Passenger / Vehicle RO-RO/Passenger ship RO-RO/Passenger ship RO-RO/Passenger ship RO-RO/Passenger ship RO-RO/Passenger ship RO-RO/Passenger ship RO-RO/Passenger ship RO-RO/Passenger ship RO-RO/Passenger ship RO-RO/Passenger ship RO-RO/Passenger ship Oil / Chemical tanker RO-RO/Passenger ship General Cargo RO-RO/Passenger ship Passenger / Vehicle RO-RO/Passenger ship RO-RO/Passenger ship Cruise Ship RO-RO/Passenger ship RO-RO/Passenger ship Bulk Carrrier Dredger RO-RO/Passenger ship RO-RO/Passenger ship RO-RO/Passenger ship Crude oil tanker RO-RO/Passenger ship RO-RO/Passenger ship RO-RO/Passenger ship RO-RO/Passenger ship RO-RO/Passenger ship Ro-Ro Cargo RO-RO/Passenger ship

17 Strategic point in the map A 1½ hour flight from the north of Greece takes you to: 52m 4,5m 23m 11m 9m 57m 4m 2,1m 62m 0,6m 5m 1

18 Our production Automated production facilities Use of S.M.T. (Surface Mounted Technology by SONY) Well trained and young employees

19 R&D Well educated R&D staff (16 employees) Capability of quick and effective new product development Innovation oriented Software & hardware capabilities

20 Our staff Our staff are our real strength, they are: Team oriented Professional Motivated Committed to the company s mission

21 Our expertise In-house specialists: In Electronics In Emergency Lighting In Fire alarm In CAD In Logistics

22 Our future Olympia Electronics looks forward to play a significant role in South-eastern Europe for the next decade in electrical and electronic market. We can say this with assurance of the need for the following: Quality orientation Expertise Competitiveness Product Awareness Total customer service

23 Sales per family (%)

24 Exports Structure (general)

25 Market Segments

28 Product families Fire Detection Emergency Lighting

31 Address Fire BSR-2104/MAR, BSR-2114/MAR Addressable fire detection panels 2 and 4 loops Addressable fire detection systems

Address Fire BSR-2104/MAR, BSR-2114/MAR Addressable fire detection panels 2 and 4 loops Dimensions in mm IP30 Produced in accordance with EN54-2, EN54-4. 32, 64 or 96 zone capability.

32 Address Fire BSR-2104/MAR, BSR-2114/MAR Addressable fire detection panels 2 and 4 loops Dimensions in mm IP30 Produced in accordance with EN54-2, EN , 64 or 96 zone capability V AC mains power supply. It offers 2 or 4 fully monitored siren outputs with a rating of 24V / 0,5A and 6 programmable relays as well as a built in network circuit. Incorporated power supply with a rating of 24V/100W and built-in battery charger for 24V batteries with a capacity of up-to 12Ah. The panels offer an extensive list of adjustments and characteristics for the control of the installed devices and sirens. These parameters can easily be adjusted using a PC based program. The programming of the panel can also be done using a PC. Messages can be viewed on the big LCD (320x240 pixels) whereas LEDs are used to show basic operations such as alarms, faults and isolated sections The operation is done using the built-in 16 key keypad. There is also an incorporated safety lock and a thermal printer mounting position The maximum delay for the sirens is 4 minutes. Addressable fire detection systems

Analogue addressable system connection diagram MAX 150 devices Addressable detectors, manual call points & sirens in each loop Ability to connect conventional sirens in fully monitored siren

33 Analogue addressable system connection diagram MAX 150 devices Addressable detectors, manual call points & sirens in each loop Ability to connect conventional sirens in fully monitored siren outputs Note: Besides the addressable sirens attached on the loop there is the ability to connect extra conventional sirens outputs or connect only conventional sirens Addressable fire detection systems

Address Fire BSR-2104/MAR, BSR-2114/MAR System

PC Note: Fire detection panel can be connected to a

Graphical interface CMI-1001 enables to have a visual

34 Address Fire BSR-2104/MAR, BSR-2114/MAR System programming The programming can also be done using a PC Note: Fire detection panel can be connected to a PC with BMS-485 to a free USB port. Graphical interface CMI-1001 enables to have a visual indication of fire detection installation. Addressable fire detection systems

Address Fire BSR-2100/MAR Repeater panel for BSR-2104/MAR, BSR-2114/MAR

35 Address Fire BSR-2100/MAR Repeater panel for BSR-2104/MAR, BSR-2114/MAR IP30 BSR-2000/MAR panel is a repeater panel for addressable fire detection panels BSR-21XX/MAR. This panel has all the major indications and a large LCD display to indicate the state of the master panel. The repeater panel is power supplied by mains and in a power failure by batteries. Panel reapeters connection diagramm Dimensions in mm Addressable fire detection systems

36 Detectors for addressable fire detection panels Optical smoke / heat of rise IP44 IP22 BSR-6055/A/MAR Optical smoke detector BSR-6057/A/MAR Optical smoke/heat of rise detector BSR-6060/A/MAR Heat of rise detector Dimensions in mm Addressable fire detection systems

It is power supplied by the loop and detects continuously the voltage levels and the signal's

37 Isolator base for addressable fire detection panels IP20 BSR-7071/A/MAR is a bidirectional, non addressable loop monitoring device for addressable fire detection systems. It is power supplied by the loop and detects continuously the voltage levels and the signal's integrity. It is produced in accordance with EN 54-17, IEC , IEC Dimensions in mm Addressable fire detection systems

38 Fire detection call point for addressable fire detection panels BSR-5036/A/MAR Fire detection call point IP44 Dimensions in mm Addressable fire detection systems

Addressable input-output unit IP65 BSR-8020/WP/MAR is an addressable input output unit which

The use of this device is to connect conventional devices which have a free relay contact in

conventional detectors, flow switches, electromagnetic door latches etc.

with maximum capacity 10 conventional devices (detectors, manual call point) or as a driving input

39 Addressable input-output unit IP65 BSR-8020/WP/MAR is an addressable input output unit which cooperates and is exclusively programmable from fire control panels BSR-2104/MAR and BSR-2114/MAR. The use of this device is to connect conventional devices which have a free relay contact in addressable systems such as conventional fire detection & extinguishing panels, gas detection panels, conventional detectors, flow switches, electromagnetic door latches etc. This device is also used as a driving input unit for conventional detectors to the addressable panel with maximum capacity 10 conventional devices (detectors, manual call point) or as a driving input unit with external power supply and maximum capacity 32 conventional devices as per EN54 regulations. Dimensions in mm Addressable fire detection systems

Line Isolator IP20 BSR-7070/A/MAR is a bidirectional (two way), non

40 Line Isolator IP20 BSR-7070/A/MAR is a bidirectional (two way), non addressable device which is used in addressable systems to sense and isolate short circuits on loops. It is power -supplied by the loop and detects continuously the voltage level and current flow. Its function is to isolate a part of the loop, remove the short circuit that is detected among two isolators. Dimensions in mm Addressable fire detection systems

Fire Sys BS-1638/MAR, BS-1642/MAR, BS-1646/MAR Fire Detection

operations, controls and indications 2 outputs for sirens, an

History memory Ethernet control and programming capability

42 Fire Sys BS-1638/MAR, BS-1642/MAR, BS-1646/MAR Fire Detection Panels 8, 12, and 16 Zones IP30 8, 12 & 16 zones Uniform operations, controls and indications 2 outputs for sirens, an alarm relay, a fault relay and an auxiliary relay. History memory Ethernet control and programming capability (card GR-8530) GR Network card through ETHERNET Conventional fire detection systems

43 Conventional detectors Beam smoke BS-655/MAR Optical smoke detector IP44 BS-657/MAR Smoke and heat detector BS-660/MAR Heat of rise detector with base Dimensions in mm Conventional fire detection systems

Conventional detector Heat Detector IP23 The Orbis range incorporates seven heat detector classes to suit a wide variety of operating conditions in which smoke detectors are unsuitable.

44 Conventional detector Heat Detector IP23 The Orbis range incorporates seven heat detector classes to suit a wide variety of operating conditions in which smoke detectors are unsuitable. The European standard EN54-5:2001 classifies heat detectors according to the highest ambient temperature in which they can safely be used without risk of false alarm. Dimensions in mm Heat detectors have a wide range of response characteristics and the choice of the right type for a particular application may not always seem straightforward. It is helpful to understand the way that heat detectors are classified as explained earlier and to memorise a simple rule: use the most sensitive heat detector available consistent with avoiding false alarms. If the fire detection system is being designed to comply with BS : 2002 heat detectors should be installed at heights of less than 12 metres with the exception of class A1 detectors, which can be installed at heights up to 13.5 metres. Conventional fire detection systems

45 Conventional base ORB-MB MAR Orbis Marine TimeSaver Base Diagrams Dimensions in mm Conventional fire detection systems

Conventional detector UV Flame detector Dimensions in mm The Marine Series 65 Base Mounted UV Flame Detector is designed to protect enclosed indoor areas

The detector has a fast acting response to flames up to 25m away and is equipped with a single UV sensor with a narrow spectral response in order to

46 Conventional detector UV Flame detector Dimensions in mm The Marine Series 65 Base Mounted UV Flame Detector is designed to protect enclosed indoor areas where open flaming fires may be expected. The detector has a fast acting response to flames up to 25m away and is equipped with a single UV sensor with a narrow spectral response in order to discriminate between flames and most spurious sources of radiation. Responds to stationary flames with no flicker Sensitive to UV radiation emitted by flames during combustion Compact flame detector which fits into MAR base (Fig 2) Zone-powered Conventional fire detection systems

47 Fire detection call point BS-536MAR Fire detection call point IP44 Dimensions in mm Conventional fire detection systems

Conventional manual call point IP67 WCP1A-R470SG-K013-01 is a conventional weatherproof manual call point which cooperates with every conventional fire detection system and all fire detection panels.

48 Conventional manual call point IP67 WCP1A-R470SG-K is a conventional weatherproof manual call point which cooperates with every conventional fire detection system and all fire detection panels. It is constructed in accordance with EN 54-11, IEC , IEC The installation of manual call points enables a person to activate manually the fire alarm during his departure of the building. Dimensions in mm Conventional fire detection systems

Conventional siren with beacon IP42 IP65 BS-531/1/WP/MAR is a conventional siren unit,

It cooperates with all conventional fire detection panels and it can be connected in the

The conventional siren has the capability to choose from 8 different tones and two

49 Conventional siren with beacon IP42 IP65 BS-531/1/WP/MAR is a conventional siren unit, that has a sound indicator and a beacon. It cooperates with all conventional fire detection panels and it can be connected in the output of all addressable fire detection panels. The conventional siren has the capability to choose from 8 different tones and two frequency rates. The maximum sound level is 94 db at 1m. The appropriate place for mounting is about 2-3 meters above the floor. Dimensions in mm Conventional fire detection systems

Conventional antiexplosive Optical smoke detector IP23 Optical smoke detectors have always been recognised as good detectors for general use.

In this respect Orbis IS is different from traditional optical smoke detectors which perform far better in white smoke than in black.

50 Conventional antiexplosive Optical smoke detector IP23 Optical smoke detectors have always been recognised as good detectors for general use. They are regarded as particularly suitable for smouldering fires and escape routes. The performance of Orbis IS optical detectors is good in black as well as in white smoke. In this respect Orbis IS is different from traditional optical smoke detectors which perform far better in white smoke than in black. Orbis IS optical detectors are also designed to reduce significantly the incidence of false alarms through over-sensitivity to transient phenomena. Orbis IS optical detectors are recommended for use as general purpose smoke detectors for early warning of fire in most areas. Dimensions in mm Conventional fire detection systems

Conventional antiexplosive Heat detector IP23 Heat

classes to suit a wide variety of operating

51 Conventional antiexplosive Heat detector IP23 Heat detectors are used in applications where smoke detectors are unsuitable. The Orbis IS range incorporates seven heat detector classes to suit a wide variety of operating conditions in which smoke detectors are unsuitable. Dimensions in mm Conventional fire detection systems

Conventional antiexplosive Multisensor smoke detector

enhanced smoke detector and as such will not give an

The optical sensor is identical to the one in the Orbis

Its sensitivity is, however, influenced by a heat

52 Conventional antiexplosive Multisensor smoke detector IP23 The multisensor smoke detector is a thermally enhanced smoke detector and as such will not give an alarm from heat alone. The optical sensor is identical to the one in the Orbis IS optical detector. Its sensitivity is, however, influenced by a heat sensing element which makes the detector more responsive to fastburning, flaming fires. Dimensions in mm Conventional fire detection systems

Conventional antiexplosive Base Dimensions in mm The terminals are: Positive IN Positive OUT Negative IN and OUT (common terminal) Remote LED negative connection Functional

The base is supplied with the screws unscrewed in order to avoid unnecessary work for the installer.

53 Conventional antiexplosive Base Dimensions in mm The terminals are: Positive IN Positive OUT Negative IN and OUT (common terminal) Remote LED negative connection Functional earth (screen) The terminal screws are captive screws and will not fall out of the terminals. The base is supplied with the screws unscrewed in order to avoid unnecessary work for the installer. The end-of-line resistor should be connected between the OUT+ and COM terminals. If it is required that all detectors be fitted with their LEDs facing the same direction the bases must be fitted to the ceiling observing the marking on the exterior which indicates the position of the LED. Conventional fire detection systems

Conventional manual antiexplosive Call point IP67 WCP1A-R470SG-K013-01IS is an intrinsically safe version of the conventional weatherproof manual call point which cooperates with every conventional

This call point is manufactured to protect against other hazards, as defined in paragraph 1.2.7 of annex II of the ATEX Directive 94/9/EC. It is intended for outdoor use within Intrinsically Safe (I.

54 Conventional manual antiexplosive Call point IP67 WCP1A-R470SG-K013-01IS is an intrinsically safe version of the conventional weatherproof manual call point which cooperates with every conventional fire detection system and all fire detection panels and is appropriate for installation in hazardous areas. It is constructed in accordance with EN 54-11, IEC , IEC This call point is manufactured to protect against other hazards, as defined in paragraph of annex II of the ATEX Directive 94/9/EC. It is intended for outdoor use within Intrinsically Safe (I.S.) systems using suitable I.S. barriers. The installation of manual call points enables a person to activate manually the fire alarm during his departure of the building. Dimensions in mm Conventional fire detection systems

55 Conventional antiexplosive Galvanic barrier CNP-399 Conventional Galvanic Barrier is installed in the safe area and ensures system integrity. Enables compliance with the ATEX directive Internal Systematic Diagram Conventional IS Configuration Conventional fire detection systems

57 Easy light GR-316/15L/MAR / GR-316/30L/MAR GR-308/15L/MAR / Maintained / Self-testing h Leds 15-30lm 7VA 8VA IP40 22m Mounting methods Dimensions in mm Photometric Data Emergency lighting

58 Comfort light GR-423/12L/MAR / GR-423/24L/MAR / GR-427/12L/MAR Maintained/ Self-testing h Leds lm 6,5 7VA IP42 20m Mounting methods Dimensions in mm Emergency lighting

59 Weather light GR-939/15L/MAR / GR-939/30L/MAR / GR-940/15L/MAR Maintained/ Self-testing h Leds lm 7VA 8,5VA IP65 24m Photometric Data Dimensions in mm Mounting methods Emergency lighting

60 Double easy light GR-392/L/MAR Maintained / Self-testing 3 h Leds 220lm 8VA IP40 22m Mounting methods Dimensions in mm Photometric Data Emergency lighting

61 Rect light GR-736/21L/MAR Maintained/ Self-testing 3 h Leds 150lm 7VA IP20 17m Mounting methods Dimensions in mm Emergency lighting

62 Eco light ZLD ZLD-28/34/44/EM/MAR Accessory for wall mounting (included in packaging) Maintained / Self-testing 3 h Leds lm 6,5VA 6,9VA IP m Installation methods Dimensions in mm Easy mounting Emergency lighting

63 Eco light MLD / DLD MLD-28D-34D/w/MAR Maintained 3 h Leds lm 7,5VA 8VA IP m Dimensions in mm Installation methods Emergency lighting

64 Marine photoluminescent Safety signs Emergency lighting

65 Thank you!

ORBIS PRODUCT GUIDE. Optical Detector. Multisensor Detector. Heat Detector. Mounting Bases

ORBIS PRODUCT GUIDE. Optical Detector. Multisensor Detector. Heat Detector. Mounting Bases PRODUCT GUIDE Optical Detector Multisensor Detector Heat Detector Mounting Bases 2...conventional detectors from Apollo orbis is a range of conventional detectors which has been developed and tested to