Mechanical properties of fasteners made of carbon steel and alloy steel Part 3: Flat washers with specified property classes

Transcription

1 Standards published New International Standards published between 01 May and 31 May 2018 * vailable in nglish only ** rench version of standard previously published in nglish only Price group T 2 ISO 898-3:2018 asteners Mechanical properties of fasteners made of carbon steel and alloy steel Part 3: lat washers with specified property classes ISO :2018 * asteners Vocabulary Part 4: ontrol, inspection, delivery, acceptance and quality T 6 ISO 20494:2017 Paper, board and pulps Paper Requirements for stability for general graphic applications T 8 Ships and marine technology ISO * Ships and marine technology Servicing of inflatable life-saving appliances Part 1: eneral ISO :2018 * Ships and marine technology Servicing of inflatable life-saving appliances Part 2: Inflatable life rafts ISO :2018 * Ships and marine technology Servicing of inflatable life-saving appliances Part 3: Inflatable lifejackets ISO :2018 * Ships and marine technology Servicing of inflatable life-saving appliances Part 4: Marine evacuation systems ISO :2018 * Ships and marine technology Servicing of inflatable life-saving appliances Part 5: Inflated rescue boats T 10 Technical product documentation ISO :2018 * Industrial systems, installations and equipment and industrial products Structuring principles and reference designations Part 12: onstruction works and building services T 17 Steel

2 ISO 9443:2018 Surface quality classes for hot-rolled bars and wire rod ISO 17832:2018 * Non-parallel steel wire and cords for tyre reinforcement ISO 19203:2018 * Hot-dip galvanized and zinc-aluminium coated high tensile steel wire for bridge cables Specifications T 20 ircraft and space vehicles ISO 10794:2018 * Space systems Programme management Material, mechanical parts and processes T 21 quipment for fire protection and fire fighting ISO :2018 * ire detection and fire alarm systems Part 5: Point type heat detectors ISO :2018 * ire detection and alarm systems Part 7: Point-type smoke detectors using scattered light, transmitted light or ionization ISO :2018 * ire detection and alarm systems Part 27: Point type fire detectors using a smoke sensor in combination with a carbon monoxide sensor and, optionally, one or more heat sensors T 22 Road vehicles ISO :2018 * Road vehicles Vehicle to grid communication interface Part 5: Physical layer and data link layer conformance test H ISO :2018 * Road vehicles Standardized access to automotive repair and maintenance information (RMI) Part 6: L-ategory vehicle specific RMI use cases and requirements H ISO * Road vehicles onnectors for the electrical connection of towing and towed vehicles Part 1: onnectors for braking systems and running gear of vehicles with 24 V nominal supply voltage ISO :2018 * Road vehicles onnectors for the electrical connection of towing and towed vehicles Part 2: onnectors for braking systems and running gear of vehicles with 12 V nominal supply voltage ISO :2018 Road vehicles Information for first and second responders Part 4: Propulsion energy identification * Road vehicles hild seat presence and orientation detection system (PO) Part 1: Specifications and test methods :2018 * Road vehicles hild seat presence and orientation detection system (PO) Part 2: Resonator specification T 23 ISO 5687:2018 Tractors and machinery for agriculture and forestry quipment for harvesting ombine harvesters etermination and designation of grain tank capacity and unloading device performance ISO 7714:2018 * gricultural irrigation equipment Volumetric valves eneral requirements and test methods

3 T 24 Particle characterization including sieving ISO :2018 * etermination of particle size distribution Single particle light interaction methods Part 4: Light scattering airborne particle counter for clean spaces T 25 ast irons and pig irons ISO 1083:2018 * Spheroidal graphite cast irons lassification T :2017 Small tools utting tool data representation and exchange Part 80: reation and exchange of 3 models Overview and principles :2014 utting tool data representation and exchange Part 201: reation and exchange of 3 models Regular inserts :2015 utting tool data representation and exchange Part 202: reation and exchange of 3 models Irregular inserts ISO 3315:2018 ssembly tools for screws and nuts riving parts for hand-operated square drive socket wrenches imensions and tests ISO 3316:2018 ssembly tools for screws and nuts ttachments for hand-operated square drive socket wrenches imensions and tests T 34 ISO 5496:2006/md ood products Sensory analysis Methodology Initiation and training of assessors in the detection and recognition of odours mendment 1 XZ T Paints and varnishes * Paints and varnishes oating systems for wind-turbine rotor blades Part 1: Minimum requirements and weathering :2018 * Paints and varnishes oating systems for wind-turbine rotor blades Part 2: etermination and evaluation of resistance to rain erosion using rotating arm :2018 * Paints and varnishes oating systems for wind-turbine rotor blades Part 3: etermination and evaluation of resistance to rain erosion using water jet T 37 ISO 1884 Language and terminology Interpreting services eneral requirements and recommendations T 39 ISO/TR Machine tools Test code for machine tools Part 11: Measuring instruments suitable for machine tool geometry tests H T 41 ISO 7590:2018 Pulleys and belts (including veebelts) Steel cord conveyor belts Methods for the determination of total thickness and cover thickness

4 T 42 Photography ISO 18944:2018 * Imaging materials Reflection colour photographic prints Test print construction and measurement :2017 * Photography rchiving systems Image quality analysis Part 1: Reflective originals T 43 coustics ISO :2018 coustics ield measurement of sound insulation in buildings and of building elements Part 2: Impact sound insulation T 44 ISO 13918:2017 Welding and allied processes Welding Studs and ceramic ferrules for arc stud welding T :2017 Rubber and rubber products Rubber process fumes components Quantitative test methods T 54 ISO 4730:2017/md ssential oils * ssential oil of Melaleuca, terpinen-4-ol type (Tea Tree oil) mendment 1: nantiomeric distribution XZ T 58 as cylinders ISO 18119:2018 as cylinders Seamless steel and seamless aluminium-alloy gas cylinders and tubes Periodic inspection and testing T 61 ISO 2555:2018 Plastics Plastics Resins in the liquid state or as emulsions or dispersions etermination of apparent viscosity using a single cylinder type rotational viscometer method ISO :2018 Plastics Poly(phenylene ether) (PP) moulding and extrusion materials Part 2: Preparation of test specimen and determination of properties ISO * Plastics Poly(phenylene sulfide) (PPS) moulding and extrusion materials Part 1: esignation system and basis for specifications ISO :2018 * Plastics Poly(phenylene sulfide) (PPS) moulding and extrusion materials Part 2: Preparation of test specimen and determination of properties ISO 29862:2018 Self adhesive tapes etermination of peel adhesion properties ISO 29863:2018 Self adhesive tapes Measurement of static shear adhesion ISO 29864:2018 Self adhesive tapes Measurement of breaking strength and elongation at break ISO 30012:2016/md * arbon-fibre-reinforced plastics etermination of the size and aspect ratio of crushed

5 objects mendment 1 XZ T 67 ISO 3183:2012/md 1:2017 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries Petroleum and natural gas industries Steel pipe for pipeline transportation systems mendment 1 XZ ISO * Offshore containers and associated lifting sets Part 1: esign, manufacture and marking of offshore containers ISO :2018 * Offshore containers and associated lifting sets Part 2: esign, manufacture and marking of lifting sets ISO :2018 * Offshore containers and associated lifting sets Part 3: Periodic inspection, examination and testing ISO :2016 Petroleum and natural gas industries Specific requirements for offshore structures Part 4: eotechnical and foundation design considerations H 35105:2018 Petroleum and natural gas industries rctic operations Material requirements for arctic operations T 69 ISO 3951 pplications of statistical methods Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation) T 71 oncrete, reinforced concrete and pre-stressed concrete ISO :2018 * Testing methods for pervious concrete Part 2: ensity and void content ISO 18407:2018 * Simplified design of prestressed concrete tanks for potable water H T 82 Mining ISO * Mining and earth-moving machinery Rock drill rigs and rock reinforcement rigs Part 1: Vocabulary ISO :2018 * Mining and earth-moving machinery Rock drill rigs and rock reinforcement rigs Part 2: Safety requirements ISO * Structures for mine shafts Part 1: Vocabulary ISO :2018 * Structures for mine shafts Part 2: Headframe structures ISO :2018 * Structures for mine shafts Part 3: Sinking stages ISO :2018 * Structures for mine shafts Part 4: onveyances

6 ISO :2018 * Structures for mine shafts Part 5: Shaft system structures T 83 ISO 11088:2018 Sports and other recreational facilities and equipment lpine ski/binding/boot (S--) system ssembly, adjustment and inspection T 85 Nuclear energy, nuclear technologies, and radiological protection ISO 19443:2018 * Quality management systems Specific requirements for the application of ISO 9001:2015 by organizations in the supply chain of the nuclear energy sector supplying products and services important to nuclear safety (ITNS) ISO 19226:2017 Nuclear energy etermination of neutron fluence and displacement per atom (dpa) in reactor vessel and internals T 92 ISO 1716:2018 ire safety Reaction to fire tests for products etermination of the gross heat of combustion (calorific value) 1902 * Test method for determination of gas concentrations in ISO using ourier transform infrared spectroscopy T 94 Personal safety -- Personal protective equipment ISO * Protective clothing for firefighters Physiological impact Part 1: Measurement of coupled heat and moisture transfer with the sweating torso ISO :2018 * Protective clothing for firefighters Physiological impact Part 2: etermination of physiological heat load caused by protective clothing worn by firefighters T 106 ISO 10637:2018 entistry entistry entral suction source equipment ISO 18618:2018 entistry Interoperability of /M systems T 107 ISO :2017 Metallic and other inorganic coatings Thermal spraying Zinc, aluminium and their alloys Part 2: xecution of corrosion protection systems T 112 Vacuum technology 20175:2018 * Vacuum technology Vacuum gauges haracterization of quadrupole mass spectrometers for partial pressure measurement T 119 Powder metallurgy ISO * Metallic powders etermination of apparent density Part 1: unnel method T 121 ISO naesthetic and respiratory equipment Medical suction equipment Part 1: lectrically powered suction equipment mendment

7 :2015/md T 131 1: hanges to requirements for operating at extremes of temperature XZ luid power systems ISO 6164:2018 Hydraulic fluid power our-screw, one-piece square flange connections for use at pressures of 42 MPa, N 25 to 80 ISO 11943:2018 * Hydraulic fluid power Online automatic particle-counting systems for liquids Methods of calibration and validation T 135 ISO 19835:2018 Non-destructive testing Non-destructive testing coustic emission testing Steel structures of overhead travelling cranes and portal bridge cranes T 138 Plastics pipes, fittings and valves for the transport of fluids ISO 10467:2018 * Plastics piping systems for pressure and non-pressure drainage and sewerage lass-reinforced thermosetting plastics (RP) systems based on unsaturated polyester (UP) resin ISO 10468:2018 * lass-reinforced thermosetting plastics (RP) pipes etermination of the ring creep properties under wet or dry conditions ISO 1047 * lass-reinforced thermosetting plastics (RP) pipes etermination of the long-term ultimate bending strain and the long-term ultimate relative ring deflection under wet conditions T 147 Water quality ISO * Water quality etermination of available weak and dissociable (W) cyanide Part 1: Method using ligand exchange, flow injection analysis (I), gas-diffusion and amperometric detection ISO :2018 Water quality Sampling Part 3: Preservation and handling of water samples T 150 Implants for surgery ISO 5910:2018 * ardiovascular implants and extracorporeal systems ardiac valve repair devices H ISO :2018 Implants for surgery Wear of total hip-joint prostheses Part 4: Testing hip prostheses under variations in component positioning which results in direct edge loading T 156 ISO 1615 orrosion of metals and alloys orrosion of metals and alloys ccelerated cyclic test with exposure to acidified salt spray, dry and wet conditions T 163 Thermal performance and energy use in the built environment ISO 17749:2018 * Thermal insulation products Sheep wool mat and board Specification ISO 20310:2018 * Thermal insulation for building equipment and industrial installations luminosilicate wool products Specification T 172 Optics and photonics

8 ISO 19740:2018 * Optics and photonics Optical materials and components Test method for homogeneity of infrared optical materials ISO 1974 * Optics and photonics Optical materials and components Test method for striae in infrared optical materials ISO 19742:2018 * Optics and photonics Optical materials and components Test method for bubbles and inclusions in infrared optical materials ISO 17915:2018 * Optics and photonics Measurement method of semiconductor lasers for sensing T 176 ISO 10006:2017 Quality management and quality assurance Quality management uidelines for quality management in projects T 182 eotechnics ISO :2016 eotechnical investigation and testing eotechnical monitoring by field instrumentation Part 2: Measurement of displacements along a line: xtensometers T 184 ISO :2017/md T 188 ISO 16147:2018 utomation systems and integration * ata quality Part 2: Vocabulary mendment 1 Small craft Small craft Inboard diesel engines ngine-mounted fuel, oil and electrical components XZ T 190 ISO 11260:2018 Soil quality Soil quality etermination of effective cation exchange capacity and base saturation level using barium chloride solution ISO Soil quality Sampling of soil invertebrates Part 1: Hand-sorting and extraction of earthworms T 192 ISO 10494:2018 as turbines Turbines and turbine sets Measurement of emitted airborne noise ngineering/survey method T 204 Intelligent transport systems ISO :2018 * Intelligent transport systems Vehicle interface for provisioning and support of ITS Services Part 3: Unified vehicle interface protocol (UVIP) server and client PI specification ISO 17419:2018 * Intelligent transport systems ooperative systems lobally unique identification ISO 17423:2018 * Intelligent transport systems ooperative systems pplication requirements and objectives ISO 18750:2018 * Intelligent transport systems o-operative ITS Local dynamic map

9 ISO 21215:2018 * Intelligent transport systems Localized communications ITS-M5 ISO 21218:2018 * Intelligent transport systems Hybrid communications ccess technology support ISO 22418:2018 * Intelligent transport systems ast service announcement protocol (SP) ISO :2018 * Intelligent transport systems ommunications access for land mobiles (LM) ITS station management Part 6: Path and flow management T 207 ISO 14026:2017 nvironmental management nvironmental labels and declarations Principles, requirements and guidelines for communication of footprint information T 211 ISO :2018 eographic information/eomatics eographic information Reference model Part 2: Imagery ISO 19146:2018 * eographic information ross-domain vocabularies :2018 * eographic information alibration and validation of remote sensing imagery sensors and data Part 3: SR/InSR T 213 ISO 5458:2018 imensional and geometrical product specifications and verification eometrical product specifications (PS) eometrical tolerancing Pattern and combined geometrical specification ISO/TR 23605:2018 * Technical product specification (TPS) pplication guidance International model for national implementation T 215 Health informatics 20405:2018 * Health informatics ramework of event data and reporting definitions for the safety of health software T 218 ISO 19474:2018 Timber Round timber Visual characteristics Methods of determination T 219 ISO 10582:2017 loor coverings Resilient floor coverings Heterogeneous poly(vinyl chloride) floor covering Specifications T 221 ISO :2015/md eosynthetics eosynthetics Part 1: Terms and definitions mendment 1 XZ

10 ISO :2015/md T 224 eosynthetics Part 2: Symbols and pictograms mendment 1 Service activities relating to drinking water supply wastewater and stormwater systems XZ ISO/TR 24514:2018 * ctivities relating to drinking water and wastewater services xamples of the use of performance indicators using ISO 24510, ISO and ISO and related methodologies T 226 Materials for the production of primary aluminium ISO * arbonaceous materials used in the production of aluminium aked anodes and cathode blocks Part 1: etermination of apparent density using a dimensions method ISO :2018 * arbonaceous materials used in the production of aluminium aked anodes and cathode blocks Part 2: etermination of apparent density and of open porosity using a hydrostatic method T 229 Nanotechnologies 21362:2018 * Nanotechnologies nalysis of nano-objects using asymmetrical-flow and centrifugal field-flow fractionation T 244 ISO 13578:2017 Industrial furnaces and associated processing equipment Industrial furnaces and associated processing equipment Safety requirements for machinery and equipment for production of steel by electric arc furnaces T 255 ISO 20675:2018 iogas iogas iogas production, conditioning, upgrading and utilization Terms, definitions and classification scheme T 258 ISO 2151 Project, programme and portfolio management Work breakdown structures for project and programme management T 282 ISO 20426:2018 Water reuse uidelines for health risk assessment and management for non-potable water reuse T 292 Security and resilience 22330:2018 * Security and resilience usiness continuity management systems uidelines for people aspects of business continuity T 299 ISO/TR :2017 Robotics * Robotics Safety design for industrial robot systems Part 2: Manual load/unload stations IULTS ISO 4045:2018 International Union of Leather Technologists and hemists Societies Leather hemical tests etermination of ph and difference figure

11 ISO 10195:2018 Leather hemical determination of chromium(vi) content in leather Thermal pre-ageing of leather and determination of hexavalent chromium JT 1 Information technology ISO/I 22275:2018 * Information technology Programming languages, their environments, and system software interfaces MScript Specification Suite ISO/I/I ISO/I :2015/or ISO/I :2015/or ISO/I :2016/md ISO/I TS 21544:2018 * Information technology Telecommunications and information exchange between systems Local and metropolitan area networks Specific requirements Part 11: Wireless LN medium access control (M) and physical layer (PHY) specifications * Information technology bstract Syntax Notation One (SN.1): onstraint specification Part 3: Technical orrigendum 1 * Information technology SN.1 encoding rules: XML ncoding Rules (XR) Part 4: Technical orrigendum 1 * Identification cards Integrated circuit cards Part 15: ryptographic information application mendment 1 * Programming languages xtensions to ++ for modules H free free XZ ISO/I TS 20540:2018 * Information technology Security techniques Testing cryptographic modules in their operational environment ISO/I :2018 * Information technology pplication security Part 3: pplication security management process ISO/I :2018 * Information technology pplication security Part 7: ssurance prediction framework ISO/I TS * Information technology pplication security Part 5-1: Protocols and application security controls data structure, XML schemas ISO/I /md ISO/I :2010/md ISO/I :2018 * Information technology eneric coding of moving pictures and associated audio information Part 1: Systems mendment 1: Ultra-low latency and 4k and higher resolution support for transport of JP 2000 video * Information technology Multimedia framework (MP-21) Part 19: Media Value hain Ontology mendment 1: xtensions on time-segments and multi-track audio * Information technology Multimedia application formats (MP-) Part 18: Media linking application format XZ ISO/I * Information technology Multimedia service platform technologies Part 1: rchitecture ISO/I TR 29196:2018 * Information technology uidance for biometric enrolment ISO/I TR :2018 * Information technology overnance of IT overnance of data Part 2: Implications of ISO/I for data management

12 Standards confirmed The following International Standards are confimred for a five year period: T 8 Ships and marine technology ISO 30006:2010 ISO :2012 ISO 16329:2003 ISO 3434:2012 ISO 20858:2007 ISO :2013 T 21 quipment for fire protection and fire fighting ISO :2010 T 22 ISO 3803:1984 ISO 4929:1978 ISO 8720:1991 ISO 11012:2009 ISO 14791:2000 Road vehicles ISO 21750:2006 ISO :1996 ISO 16850: :2014 ISO :2012 ISO :2012 ISO :2012 ISO :2012 ISO :2012 ISO :2012 T 28 ISO 2137:2007 ISO 2176:1995 Petroleum and related products, fuels and lubricants from natural or synthetic sources

13 ISO 3448:1992 ISO 4256:1996 ISO 6245:2001 ISO 6614:1994 ISO 6618:1997 ISO 6619:1988 ISO 9038:2013 ISO 9120:1997 ISO 11007:1997 ISO 11009:2000 ISO 13032:2012 ISO 13736:2013 ISO 13757:1996 ISO 13758:1996 ISO 13759:1996 T 31 Tyres, rims and valves ISO 15222:2011 ISO 18164:2005 T 33 Refractories ISO :2012 ISO :2012 ISO :2012 ISO :2012 ISO :2012 ISO :2012 ISO :2012 ISO :2012 T :2006 ood products ISO/TR 12591:2013 ISO :2008 ISO :2008 ISO 3972:2011 ISO 5495:2005 T 45 Rubber and rubber products ISO :2010

14 ISO :2012 ISO 19004:2004 T 46 ISO 1086:1991 ISO 5123:1984 ISO 6357:1985 ISO 15924:2004 T 54 ISO 17412:2007 T 67 ISO :2000 ISO :2001 ISO :2001 Information and documentation ssential oils Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries ISO 20312:2011 ISO 21457:2010 ISO :2005 ISO :2005 T 71 oncrete, reinforced concrete and pre-stressed concrete ISO :2012 ISO :2012 ISO :2012 ISO 16204:2012 T 85 ISO :1991 ISO 14152:2001 Nuclear energy, nuclear technologies, and radiological protection ISO 29661:2012 ISO 7476:2003 ISO 8298:2000 ISO 9006:1994 ISO 9279:1992 ISO 9889:1994 ISO 9891:1994 ISO 9892:1992 ISO 9894:1996 ISO 11311:2011 ISO 11320:2011

15 ISO 11932:1996 ISO 16424:2012 ISO :2007 ISO :2007 ISO :2007 ISO 27468:2011 T 92 ire safety ISO/TR :2013 ISO/TR :2013 ISO/TR :2013 ISO/TR :2013 T 94 Personal safety -- Personal protective equipment ISO 6529:2013 ISO :2004 ISO :2004 ISO :2012 ISO :2012 ISO :2008 ISO :2013 ISO 20471:2013 T 107 ISO 28763:2008 T 115 ISO 16330:2003 T 120 Metallic and other inorganic coatings Pumps Leather ISO 11396:2012 ISO 11398:2012 T 121 ISO :2008 ISO :2008 T 122 ISO 8768:1987 T 126 naesthetic and respiratory equipment Packaging Tobacco and tobacco products :2015 T 130 raphic technology ISO 5776:2016

16 ISO :1993 T 136 ISO :1987 T 147 ISO :1997 T 148 ISO 8239:1987 T 164 ISO :2008 ISO :2008 T 172 ISO :1999 ISO :2005 urniture Water quality Sewing machines Mechanical testing of metals Optics and photonics ISO :2012 ISO 12870:2016 ISO 14889:2013 ISO 16034:2002 ISO 24157:2008 T 173 ssistive products ISO 17966:2016 ISO :2012 ISO :2008 ISO :2008 ISO :1989 ISO :2012 ISO :2012 ISO :2012 T 178 Lifts, escalators and moving walks 18870:2014 T 180 ISO :1993 ISO :1995 T 193 Solar energy Natural gas ISO :2012 ISO :2012 T 212 linical laboratory testing and in vitro diagnostic test systems

17 ISO 23640:2011 T 221 eosynthetics ISO 10772:2012 ISO 10776:2012 T 228 Tourism and related services ISO 13293:2012 T 238 Solid biofuels ISO 16994:2016 JT 1 Information technology ISO/I 21481:2012 ISO/I :2012 ISO/I :2012 ISO/I :2012 ISO/I TR :2004 Standards withdrawn Period from 01 May to 31 May 2018 T 2 asteners ISO 10484:1997 (replaced by ) T 17 Steel ISO :1980 (replaced by ) T 20 ircraft and space vehicles ISO 1749:1973 (replaced by ) T 34 ood products ISO 6651:2001 (replaced by ) T 43 coustics ISO :1992 (replaced by ) T 45 Rubber and rubber products ISO :1992 (replaced by ) T 58 as cylinders

18 ISO 6406:2005 (replaced by ISO 18119:2018) ISO 10461:2005 (replaced by ISO 18119:2018) ISO 10461:2005/md 1:2006 (replaced by ISO 18119:2018) T 61 Plastics ISO :2007 (replaced by ISO :2018) ISO :2009 (replaced by ISO ) ISO :2009 (replaced by ISO :2018) T 69 pplications of statistical methods ISO 8423:2008 (replaced by ISO 3951) T 172 Optics and photonics 17915:2013 (replaced by ISO 17915:2018) T 204 Intelligent transport systems 17419:2014 (replaced by ISO 17419:2018) 17423:2014 (replaced by ISO 17423:2018) 18750:2015 (replaced by ISO 18750:2018) ISO :2013 (replaced by ISO 22418:2018) T 211 eographic information/eomatics :2008 (replaced by ISO :2018) JT 1 Information technology ISO/I 16262:2011 (replaced by ISO/I 22275:2018) Meeting calendar The meeting calendar is available at