Oficiālais DSC pārstāvis Latvijā SIA «BK Latvia» Dārzciema ielā 60, Rīga

Transcription

1

2 Situation Strategy Platform Each product line is a unique platform Each platform maintained individually One common platform Speed to market Future Readiness Out of code space; feature trading Keybus completely maxed out Flexible path to upgrade chips New bus to bring speed, capacity, flexibility Wireless Unencrypted limited functionality, market specific struggles Best in-breed Flexible, powerful, secure Features Limited ability to add features Growing Remote Service and Inspection features Expanding Alarm Verification features

3 PowerSeries Neo RESIDENTIAL / SCALABLE COMMERCIAL HYBRID SOLUTION Up to 128 wireless hardwired zones // Versions: 16 / 32 / 64 / 128 zones // Up to 128 wireless zones // 8 partitions // 16 keypads // 95 users // 1000 event buffer // 4 onboard output // Alarm protocols: Contact ID, SIA // PGM Outputs matches zone count

4 PowerSeries Neo RESIDENTIAL / SCALABLE COMMERCIAL HYBRID SOLUTION WITH: // Encrypted Communications Bus 128 Bit AES Encryption // Encrypted Wireless Transmission 128 Bit AES Encryption // Extended Wireless Range // Remote PC-Link Module // Enhanced Diagnostics // Intelligent Wireless Peripherals

5 PowerSeries NEO V 1.1 EN approvals. European CE Directives (EMC, R&TTE, LVD), INCERT (Belgium), NCP (Holland), NFA2P Type 2 (France), IMQ (Italy) Livello 2, SBSC (Sweden) Larmklass 2, EN /-3/-6 Grade 2, Class II Environmental, FCC/IC, UL/ULC, F&P Class 2 Grade 2 (Denmark), FFFS Class 2 Grade 2 (Finland), FG Class 2 Grade 2 (Norway), ENV Class II, ATS Class II, CertAlarm VDS certification to be achieved during phase 2.

6 Nomenclature HSXXXX - Control Panel HS: Hybrid System X: Commercial Product Series 2 Phase 1 System (Grade 2*) 3 Phase 2 System (Grade 3*) XXX: Total zones zones zones zones zones *Grades are compliance with European standards for security systems. These standards were developed based on the level of threat a system must be able to contain. Grade 1: Intruders expected to have little knowledge and limited tools. Alarm is suitable for a low risk. Grade 2: Intruders expected to have limited knowledge and some tools. Alarm is suitable for a low to medium risk. Grade 3: Intruders expected to have knowledge and full range of tools. Alarm is suitable for medium to high risk. Grade 4: Intruders expected to have sophisticated knowledge and tools. Alarm is suitable for a high risk.

7 CORBUS Power Neo high speed communication bus Features Encryption (128 bit AES) Much higher speed (64KB/s vs. 1KB/s) Visual verification support Remote firmware upgrade Increased panel capacity & features Future upgrades Uses the same wiring methodology as COMBUS / KEYBUS RS-485 based Limitations Not backward compatible to existing hybrid panels, keypads & modules (not compatible with KEYBUS or COMBUS)

8 Specifications HS2016 HS2032 HS2064 E HS2128 E On-Board Zone Count Total Zone Count Total User Count 47 + Master 71 + Master Master Master On Board PGM Support PGM 1 = 50mA; PGM 2 = 300mA PGM 1 = 50mA; PGM 2 = 300mA PGM 1,3,4 = 50mA; PGM 2 = 300mA PGM 1,3,4 = 50mA; PGM 2 = 300mA Total PGM Count 16 x 50mA (HSM2208) 4 x 500mA (HSM x 50mA (HSM2208) 4 x 500mA (HSM2204) 64 x 50mA (HSM2208) 12x 500mA (HSM2204) 128 x 50mA (HSM2208) 16 x 500mA (HSM2204) Partitions Total Keypad Count Wireless Keys Wireless Sirens Wireless Repeaters Proximity Tags

9 Next Gen Hybrid Phase 1 Transceiver module HSM2HOST8 Input Module HSM2108 Output Module HSM2204 Keypads

10 Keypads Wire-free Hardwired LCD LCD ICON 16 LED Touch Built-in transceiver option No Yes Yes No No Prox option Yes Yes Yes No Yes Voice prompt Yes No No No No 8 Partition Support Yes Yes Yes Yes Yes Front & rear mount tamper Yes Yes Yes Yes Yes 5 Programmable function keys Yes Yes Yes Yes Yes 3 Separate panic keys Yes Yes Yes Yes Yes Multiple door chimes Yes Yes Yes Yes Yes I/O onboard Yes Yes Yes Yes Yes Global keypad functionalities No Yes No No Yes

11 Wireless

12 Wireless Powerful Frequency Hopping Spread Spectrum 2-way synchronous TDMA Extraordinary Range Smart Adaptive Transmission Power Adaptive Best Path selection Green! Batteries last longer Secure 128 Bit AES Encryption Avoids interference (frequency hopping) Sniff resistant Easy Quick enroll process Placement test indication LED on devices Auto repeater enrolment

13 PowerG Value Features ROBUST // FHSS & TDMA // Adaptive Power & Path // Long Battery Life // Adaptive Power GREEN RANGE // Long Line-of-Sight // Interference Immunity // 128-bit AES Encryption // Sniff Resistant SECURE DEVICES // Extensive catalog // Growing

14 Power G Two way wireless - FFB Feature Function Benefit Long battery life - Adapting devices wireless range to the distance to panel - Wireless devices just work when the panel is set Long wireless range No need of repeaters to obtain a good wireless range Best wireless technology for outdoor protection. Wireless devices telemetry - Check the status in real time of all the wireless devices. - Check devices programing remotely Reducing the operational cost Decreasing the cost of the installation Improving the service to the end user. Reduce the instalation time Two way wireless keypads Wireless Devices LEDS work when the panel is set Wireless devices in test mode Frequency hopping Functional two way wireless keypad with full installer programming Indicate to the installer/user a detection has been realized. Device LED indicate wireless range is Good/medium/Bad Device is able to jump 64 times per second into different channels looking for the less congested one, reducing the number of interferences and improving the wireless range Reducing operational cost. Avoiding wiring all the keypads in the system Perception of security to the end user. Reduce the installation time - Less servicing. - Longer Range - Longer Battery life.

15 Innovative Three-Layered RF Technology Frequency-Hopping Spread Spectrum Repeated frequency switching during transmission Increased robustness; Less interferences; Extended range Time Division Synchronized System Transmissions are in ordered in time slots Minimized collisions; Long battery life; More devices Full Two-Way Communication Panel gives commands to devices Easy/fast installations; Powerful diagnostic; Remote management

16 Frequency Hopping Spread Spectrum All devices jump frequencies all the time High reliability Can t be blocked by narrowband interference Does not need to switch system to a good frequency due to interference Longer distances Overcome partial interferences Frequency Secure network Data interception is extremely difficult Proven Same technology in use by Bluetooth Also used in 4G The Interference Good Hops Transmission Blocked Bad Hops Transmission range reduced Time Hopping Frequencies 8 hopping frequencies in the MHz band 4 in MHz band 50 in MHz band Dynamic Network switches frequencies 64 times a second

17 Repeaters Repeaters are not just to increase range Battery Life Redundant Comms Preventative Devices use less Tx power to talk to close repeater vs far transceiver Backup comms path for wireless If 1 repeater goes missing, still good Adaptive Best Path will prevent post-installation issues info@bklatvia.lv info@bklatvia.lv

18 Wireless Devices

19 Battery Life Up to 8 years PG8911 Outdoor Siren PG8985 Flood Detector PG8945 Contact with Aux Input PG Button Wireless Key Up to 7 years PG8924 Curtain Motion Detector PG8974 Mirror Optic Motion Detector PG8905 Temperature Sensor Significant battery life achieved by: Adaptive Transmission Power Adaptive Best Path Selection Full 2-way communication Less Collisions = Less Retries: Frequency Hopping Spread Spectrum TDMA Up to 5 years PG8926 Smoke Detector PG8923 Natural Gas Detector PG8975 Ultra Slim Contact PG8984 Dual Tech Motion Detector Shorter Battery Life Devices PG8913 CO Detector (1 year) PG8994 Outdoor Motion Detector (3 years) PG8912 Glassbreak (4 years) PG8934 Motion Detector with Camera (4 years)

20 PowerG Wireless Devices PG9938 Panic Key: Single large, easy-to-use button 2-second delay to prevent false alarms PG Button Key: Ability to arm/disarm system Press both buttons simultaneously for 3 seconds to signal an emergency situation

21 PowerG Wireless Devices PG9975 Ultra Slim Door/Window Contact: Magnetic reed switch for protection of doors & windows Slim design that once installed is discreet PG9985 Flood Detector: Probe detects the presence of water, providing advance warning of potential flooding 1.8m of wire to allow for installation of the detector away from water Supervised probe

22 List of Devices Life Safety Devices: PG9926 Smoke Detector PG9916 Smoke Detector with Heat PG9913 Carbon Monoxide Detector PG9923 Natural Gas Detector Motion Detectors: PG9904(P) PIR Motion Detector PG9934(P) PIR Motion Detector with Camera PG9924 Curtain Motion Detector PG9984(P) Dual Tech Motion Detector PG9974(P) Mirror Optic Motion Detector PG9994 Outdoor Motion Detector Sirens: PG9901 Indoor Siren PG9911 Outdoor Siren

23 List of Devices (Cont d) Door / Window Contacts: PG9945 Contact with Auxiliary Input PG9975 Ultra Slim Door/Window Contact Wireless Keys: PG button Wireless Key PG button Wireless Key PG button Key/2-button panic PG button panic key Other: PG9905 Temperature Sensor PG9935 Shock Detector PG9912 Glass Break Detector PG9985 Flood Detector PG9920 Wireless Repeater

24 Device Auto-Enroll Process Enter Installer s * [804] Enter Wireless Programming Enter Auto- Enrollment Mode [000] Press ENROLL button on device (until red LED) Assign Zone #, Zone Definition, Assign Partition Confirm Serial Number

25 Placement Local Placement Display Mode is initiated after a device tamper. Stays active for 15 minutes LED on device will display placement Long pulse for Signal Sent Followed by 3 flashes for STRONG SIGNAL 3 flashes for MODERATE SIGNAL 3 flashes for WEAK SIGNAL info@bklatvia.lv info@bklatvia.lv

26 Testing Wireless Zones Select (601) <> Test WLS Zones Zone XXX(XXX) <> {Zone XXX Label} {Zone XXX Label} Testing Zone XXX Signal Link Quality: 24 Hr = Average signal link quality for last 24 hrs Now = Signal Link Quality on the packets that were just sent Repeater Notification: Will display repeater details if the signal is received via a repeater 24Hr: Strong Now: Strong 24Hr: Good Now: Good 24Hr: Poor Now: Poor 24Hr: 1-Way Now: 1-Way 24Hr: Not Test Now: Not Test 24Hr: Early Now: Early Data Received ` From Repeater X info@bklatvia.lv info@bklatvia.lv

27 Settings Settings are contained in the panel All wireless device settings are in subsections of [804] Settings are sent to the device on enrolment, or when a setting is changed These are some examples of Wireless Device settings: Zone XXX <> Device Toggles PG9934 PIR with Camera Toggle (01) <> Alarm LED Y Toggle (02) <> Event Counter Y Toggle (03) <> Blk & Wht/Clr Y Toggle (04) <> Image Resolut Y Zone XXX <> Zone EOL Select (01) <> Disabled Zone XXX <> Device Toggles Toggle (01) <> Burglary Siren Y Select (02) <> Normally Open Toggle (02) <> Fire Siren Y PG9975 Ultra Slim Contact Select (03) <> Normally Closed Select (04) <> Single EOL PG9926 Smoke Detector Toggle (03) <> Gas/CO Siren Y Toggle (04) <> Flood Siren Y info@bklatvia.lv info@bklatvia.lv

28 Power Series Vs Power Neo Power Series Power Neo Maximum numbers of zones Maximum numbers of wireless zones Maximum numbers of partitions 8 8 Maximum numbers of PGM Event buffer Hardwired keypads 8 16 Prox keypads No 16 Wireless keypads No 16 Wireless sounders No 16 Wireless repeaters 4 (one way) 8 Proximity tags No 95 Calendar to outputs No Yes Two way wireless detection devices No Yes Wireless visual verification No 10 Pir Cams SMS reporting and control (by GPRS module) No Yes Remote Routine Inspections No Yes Integration protocol built into the communicators. No Yes Remote firmware panel and modules upgrade No Yes

29 PowerSeries Vs Power Neo Power Series Power Neo Link tags to outputs No Yes High security partition management (keyfob + code) Bank code. No Yes Quick module enrolment No Yes Status LED in the system modules No Yes Quick wireless devices enrolment No Yes Module labels for quick recognition of the module No Yes Easy way to manage the partition by a global keypad No Yes Dedicated power supply for communicators to avoid sabotage situations No Yes Remote installation of the 3G/IP module No Yes Check the 3G/GPRS range in the keypad No Yes Virtual zone input No 32 PC-links connectors 1 2 Voice prompt No Yes, wireless keypad Selection of different resistors connections per hardwires zones Zones 1-8 All the zones Android and Iphone App compatibility for keypad commands No Yes Push notification by IP & GPRS from the panel to the App No Yes DLS web SA compatibility Yes Yes

30 PowerSeries Vs Power Neo Power Series Power Neo Wireless devices LED works when the system is set Just in test mode Yes No delay in the wireless signals transmission Yes No Active Wireless placement test No LED in the device Wireless Signal indication strength per device in keypad and DLS No Yes Wireless keypad with full functionality (same functionality than the hardwired one) Wireless keyfobs 16 (one way) 32 (two way) Extended wireless range 600 Mts 2 Km Indoor & Outdoor wireless sounders No 16 Virtual keypad No Yes Label programming No Yes No Yes

31 Alternate Communicators 3 models available: Cellular (3G2080R*) Internet (TL280R*) Internet/Cellular (TL2803GR*) Supervision with 128-bit AES encryption All cellular models are 3G Utilizes HSPA network (3G) with fallback to EDGE/GPRS (2G) SIA and Contact ID format Upload/download over Cellular or Internet Full DLS support System Admin software Firmware Upgrading Visual verification over Cellular or Internet Remote panel and communicator firmware update

32 Alternate Communicators Plug and play module. No commissioning required. Full communicator programming by keypad, by RS-232, IP or GPRS Possibility to check the 3G GPRS Signal range and show in the keypad. Possible to report to 4 different IP receivers with communications priority programming Different account code for Ethernet and GPRS events. Possibility to differentiate the IP and GPRS polling fault independently. DNS compatible. Two APNs compatible. Visual verification compatible by 3G/2G or IP Visual verification transmission time less than 20 seconds.

33 Alternate Communicators Remote mounting using PCL-422 module High security device to place the backup communicator outside from the main cabinet for prevent communicator tamper In Case of panel tamper (extra power supply needed) a tamper report will sent to the central station automatically. PC link connector to avoid connecting to the panel in case of difficult access to the panel PCB Up to 50 ft extension of PC-Link Up to 1000 ft if using a power supply (12V) Pair of devices, one at each end Fits in existing cabinets (4050C, 5003C)

34 Alternate Communicators Self Monitoring Command and Control via SMS Available on Cellular models Similar to Alexor / Impassa functionality All the user actions can be done by SMS commands protected by codes Any user code can realize the SMS functionality Up to 8 telephones to report the SMS events. Push notification to The Neo GO phone APP Full event real time reporting to Power Neo App Compatible with GPRS and IP technology. Compatible with the modules; GPRS/3G communicator (3G2080R*) Ethernet communicator (TL280R*)

35 Power Series Neo Go - Compatible with IOS and Android devices. - Connectivity over 3G/2G or IP networks - Compatible with all the Power Neo range of panels. - Easy to configure by the final user. - Just inserting into the app the serial number of the Neo panel.

36 Power Series Neo Go - Plug & Play user configuration. - No router port forwarding. - Just inserting the panel serial number into the App to go. - Over GPRS or Ethernet connectivity - Event Push notification - User code protected. - Intuitive multiple partitions management - Systems labels recognition. - Remote zone bypassing - Shortcut between the events and App. Selecting the event in the phone is opening the App

37 Power Series Neo Go - Interactive Menu. - Multi language. - Work with the panel programmed labels. - Working over GPRS or IP - Management up to 8 partitions - Away - Stay - Night mode arming

38 Power Series Neo Go - Check status of the zones - Wireless - Hardwires - Remote zone bypasing - Check the system faults. - Real time push notification. - Alarms - Tamper - Faults - System events

39 PowerSeries Neo Go App Screen Descriptions My System(s) allows the user to select different systems, such as home, or office. System Management/Add System allows additional sites can be added. System Management/Manage Systems allows for the communicator information to be updated, and the user access code to be changed. Also, additional systems can be removed. More/Notifications is the history of events that have been sent out to each of the systems.

40 PowerSeries Neo Go App Screen Descriptions cont d 1. Indicates that are alarms in memory that the user should be aware of. 2. Indicates that there are troubles on the system that the user should be aware of. 3. Indicates that there is at least one partition armed, or all partitions are disarmed Disarmed Green house and button, lock is open. Armed Red house and button, lock is closed.

41 PowerSeries Neo Go App Screen Descriptions cont d The following outlines the different armed states that can be displayed on the Go App. 4. Indicates that the partition is armed in Stay mode, as indicated by the house icon. 5. Indicates that the partition is armed in Away mode, as indicated by the closed lock. 6. Indicates that the partition is armed in Night mode, as indicated by the house and moon. 7. Indicates that the partition is disarmed, as indicated by the open lock. Pressing the status icon(s) will allow the user to select a different arming state.

42 PowerSeries Neo Go App Screen Descriptions cont d Pressing the Neo logo (1), will allow the user to go to further functions of the panel. Zones will take the user to select or view zones that have been bypassed. Outputs will allow the user to change the state of command outputs. Similar to keyfob operation. Settings allow the user to set notifications and sounds for the app.

43 PowerSeries Neo Go App Screen Descriptions cont d This is the partition selection screen. It is presented when accessing zones, or PGM outputs. Users will only see partitions that are available to them. The current state of the partitions will also be displayed. If there are troubles on the system, it will show on each of the applicable partitions. Note: Alarms will not be shown per partition.

44 PowerSeries Neo Go App Screen Descriptions cont d Zones on the partition will be displayed similar to the screen as pictured. Zone labels will be displayed to give the user an accurate understanding of the zone they are viewing. Zones can be bypassed on this screen. 1. Zones that are bypassed will be displayed by having the Bypass button have a dark background. 2. Open zones will be displayed with a message and an icon that indicates open zone. 3. Zones in alarm memory will be displayed with a message and icon. Note that the alarm memory will override the zone open display

45 PowerSeries Neo Go App Screen Descriptions cont d Command Outputs on the partition will be displayed as pictured. Labels will not be provided to define what the output may be. Output states will not be displayed. Important Note: Pulsed output types will only trigger if the On button is selected. Steady State output types will follow the requested state. Your installer will review the output options that are enabled on your system with you.

46 Sur-Gard System 5 Phase 1 Less Rack Space Required 4 U in height (1/2 the height of a System III/IV) Increased IP Account Support 2,560 Visual Verification accounts (X 3 tables) 2,560 Supervised Accounts (X 3 tables) 15,360 unsupervised accounts (X 3 tables) Three tables grows with your needs Virtual Profiles Multiple Supervision Windows Lower Cost of Ownership Integrated Redundancy Multiple/backup Automation Paths Real Time System Health Status LCD Display

47 System Administrator Software Manage Monitor Control Manage Users & Schedules Real-Time Dashboard for panel status & events 1-click access to functions via Dashboard Modular Can be installed as a stand-alone application Can also be installed as an add-on to DLS 5 Fully synchronized database if add-on to DLS 5 User-Oriented Web-based client Process driven Auto-connect, Auto-detect Records Full history of panel events Can be exported to PDF or XML Integration via API

48 DLS Full Driver Pack With enhanced Remote Diagnostics capabilities Remote Routine Inspections Add-on System Admin Software Add-on

49 Remote service management Accessibility Connection from the panel to the DLS and viceversa Scheduled connections based in calendar. Automatic records of all the connections. Technical oriented Complete panel status information Arming status of the panel Last Arming time and date. Record- Oriented All the information stay in the customer account Possible to export the file to PDF and Excel Full historical of panel events

50 Remote service management - Complete panel information - Customer information - Actual troubles in the system - Partition Status - Bypass zones - New events from the last report

51 Remote service management - Zone activity - reporting zones in fault - Reporting last time the zone was active - Walk test On/OFF

52 Remote service management - Real time battery voltage check - Last month battery voltage analysis. - Possibility to export the graphic to JPG file

53 Remote service management - Real time zone resistor Value - Last month resistor Value analysis. - Possibility to export the graphic to JPG file

54 Remote service management - Add comments to the report. - Flag the report like service or approve it. - Export the complete report to PDF - Check the firmware version of all the devices connected to the panel

55 Remote service management - RSM management Screen - Check the status of all the RSM reports. - Flag as service in case of system faults or following the rules previously programmed. - Possibility to access to the account directly from this screen.

56 Remote service management Virtual keypad - Follow any keypad in the installation. - Real time of the actions realized in the keypad in the field - Visual and audio signals of the installer/user actions. - Ideal for installer guidance. - Ideal to support final user to modify user codes. - Ideal for trainings

57 Remote Support Enhancements // Reducing Total Cost of Maintenance // Better Customer Satisfaction // Faster Response Times CONNECT DIAGNOSE ABLE TO CONNECT EASILY // Shortcut for User Initiated Call up // User Initiated Call up over IP & GPRS // Firewall-friendly IP Connections COMPREHENSIVE DIAGNOSTIC DATA AVAILABLE // Hardware diagnostics // Extensive Event Buffer Filters // Real Time Status Dashboard FIX TEST CONFIGURE & CONTROL // Full programming available // Functions // Initiate Test Modes // Reset Modules // Firmware Upgrade LIVE REAL-TIME FEEDBACK // Real Time Status Dashboard // Live Event Buffer // Perform functions and initiate test modes

58 Integration

59 Advantages of integration // One GUI to control all systems - no need to change between screens // Integrated solution brings in much more than the sum of functions of each single system // Improved operator efficiency no need to go through endless list of transactions // No need for manual search of video timeframes // Video storage optimization free up NVR storage while keeping important video on external storage // Advantages of integration between Tyco brands native integration, already proven effective and faultless, no need for additional investment time & money to integrate with 3rd party products // No need for additional modules, cables, devices integration simply works

60 Questions?