Safety & Security Systems CATALOGUE 2016 / 17

Transcription

1 Safety & Security Systems ATALOGUE 2016 / 17

2

3 Established in THE OMPANY Innovative electronic safety and security systems 165 employees, with 10% in R & D dept Strong presence in over 72 countries worldwide Purely Greek company ertified products according to the European standards. 1010a 1010a 1.ΚΜ ΚΜ BS BS EN EN ΚΜ ΚΜ BS BS EN EN

4 1010a 1010a 1.ΚΜ BS EN ΚΜ BS EN Dedication to QUALITY OLYMPIA ELETRONIS S.A. aiming in the quality, has adopted in the last years, production and inspection procedures that have supplied the market with products that are totally in accordance with European construction prototypes (ΕΝ). For the production, the company applies advanced systems world class manufacturing such as lean systems, TPM, 5S which give it competitive advantages. Its products allocate certificates from various laboratories such as: LPB, VdS, LLOYD S, H.E.E.Q.A., EVPU, BSI, BUREAU VERITAS e.t.c. The company applies a complete management system IQMS "oly q" which include quality management systems, as well as environmental, hygiene and personnel safety management systems. Olympia Electronics S.A. has been certified according to ISO9001, OHSAS 18001, ISO and for the second time (first time in 2005) has been accredited the European enterprise distinction in the scope of EFQM Levels of Excellence. Also since 2011 the company holds the bee bronze award of the European Business Ethics Network. Our PRODUTS Emergency lighting Fire detection systems ) Gas detection systems Burglar alarm and security systems Access control systems (ard Switches) Motion detectors Electronic room thermostats Electronic sirens Electronic insect traps (HAP standards) Electronic elevator systems (customised) Emergency lighting & fire detection systems for marine applications

5 Some of our PROJETS AIRPORTS VARIOUS INSTALLATIONS SHOPPING MALLS Arlanda Airport / Sweden Frescati university library / Sweden Armada shopping center / UK Landvetter Airport / Sweden Happel Stadium / Vienna, Austria Solaris shopping center / Esthonia Macedonia Airport / Greece Schwerin metro / Germany Bergvik shopping center / Sweden Lisbon Airport / Portugal Better Life Appliances for ayan Tower/ Dubai, Dubai Mall / Dubai New Delhi Airport / India Hushagsgymnasiet school / Sweden Beirut ity entre / Lebanon El. Venizelos Sportsarena Änglagården / Sweden El orte Inglés / Spain Frankfurt Airport / Germany Olympic village / Greece Shopping center Mitt I city / Sweden. Oslo Airport / Norway Twin Tower / Lebanon Doha International airport / Qatar. HOTELS Kadrah Grid Station / Oman ARGO OFFIES / Prague, zech Republic Prioritet Serneke Arena / Sweden Asplund Hotel / Sweden Press center of the Olympic games / Rio, Brazil. Movenpick / Petra, Jordan Hilton, Athens / Greece Le Royal Hotel / Dbayeh, Lebanon King George, Athens / Greece Desert Night amp / Oman. EXPORTS We export to 72 countries of Abroad European Union Eastern European countries & Russia Middle East and countries of Gulf Africa U.S.A. Iceland

6 GENERAL ONTENTS EMERGENY ING EMERGENY ING WITH LEDs EMERGENY ING WITH FLUORESENT LAMPS SPEIAL ATEGORIES FIRE DETETION SYSTEMS ONVENTIONAL FIRE DETETION SYSTEMS ADDRESSABLE FIRE DETETION SYSTEMS FIRE DETETION PERIPHERALS GAS DETETION SYSTEMS BURGLAR ALARM SYSTEMS ONTROL WARNING UNITS DEVIES FOR GENERAL USE, ONTROL/WARNING UNITS, LED ALERT HOTEL AESS RFID ARD SWITHES ELETRONI ROOM THERMOSTATS Olytherm ELETRI INSET TRAPS VARIOUS MARKING SIGNS REPLAEMENTS AESSORIES INDEX / EXPORT TERMS OF SALES / ONTAT

7

8 EMERGENY ING EMERGENY ING WITH LEDS EMERGENY ING WITH FLUORESENT LAMPS SPEIAL ATEGORIES

9 EMERGENY ING GENERAL GUIDES GENERAL EMERGENY LUMINAIRE ATEGORIES NON MAINTAINED EMERGENY LUMINAIRES. These luminaires operate only during an interruption of the mains power supply. They consist of a charging circuit, rechargeable batteries(usually Nid), a control circuit and a lamp ignition circuit, if the luminaire contains a fluorescent tube. MAINTAINED EMERGENY LUMINAIRES. Luminaires of this type operate either from the mains power supply and during the interruption of the mains power supply. The same lamp is used for both instances. They consist of a lamp operation circuit from the mains power supply (usually and electronic ballast), a charging circuit, rechargeable batteries (usually Ni d), a control circuit and an inverter for the lamp, if the luminaire contains a fluorescent tube. SUSTAINED EMERGENY LUMINAIRES. This type of emergency luminaires is identical in operation with the maintained type with the only difference that two lamps are used, one for emergency operation and the other for operation with the mains power supply. SLAVE EMERGENY LUMINAIRES. These luminaires do not contain battery for their operation but depend on external power sources (central battery systems). The slave luminaires are categorized according to their operation voltage. There are models for 12, 24 V A/D and 230V A/D. NEW TEHNOLOGY EMERGENY LUMINAIRES SELFTESTING «INTELLIGENT» EMERGENY difficult but offers many advantages and LUMINAIRES. capabilities compared to a system with common This special category incorporates high technology emergency luminaires. microprocessors monitor basic operation parameters. The intelligent luminaires of olympia electronics ENTRALLY SUPPLIED ADDRESSABLE monitor and test for: EMERGENY LUMINAIRES. orrect charging, internal circuitry operation and They operate with the same philosophy as the the correct battery installation on a continuous basis. addressable emergency luminaires with the orrect lamp operation every 15 days. difference that they do not have batteries but are Autonomous duration by fully discharging every 6 powered and simultaneously monitored by a months central control panel. The installations of this type, They have three LEDs by which they show their apart from other things, have very few operational state. This permits maintenance maintenance requirements because the batteries personnel with a glance, to know exactly which and all control circuitry are located in the central luminaires require maintenance and what type of control panel. maintenance is required. The intelligent luminaires are also available in nonmaintained, maintained and sustained types. ADDRESSABLE EMERGENY LUMINAIRES. These types of luminaires operate with the same philosophy as the intelligent type with the main difference that the tests are conducted by commands that are issued by a central control panel, which is programmed by the user as to the type of test and when it will be conducted. The results of every test is stored into the panel s memory and can be seen on the panel s screen or can be printed. The installation and commissioning of such a system is surely more 08

10 GENERAL GUIDES INSTALLATION OF EMERGENY LUMINAIRES The guidelines below will attempt to give simple and understandable instruction and guides to installers that design, install and commission emergency luminaire systems. These guidelines were based on European requirements. Emergency luminaires must be mounted in crucial points such as: Near corridor crossings. lose to corridor ending where a change of direction is required. Near Hazard exits. In stairwells to supply sufficient illumination to each step. Near each floor level variation. 09

11 EMERGENY ING GENERAL GUIDES Near every call point. Externally or near every final exit. On predetermined escape routes. Escape routes must be illuminated with a minimum o 1 lux along the central line of the corridor and 0,5 lux after the central line with a width of 1 meter. The spots between the common luminaires must be filled with emergency luminaires in order for the maximum installation distances that are proposed by the manufacturer are not exceeded. Near fireextiguishing gear (e. i. Fire hoses). In open or antipanic areas. In these areas, the illumination must be 0,5 lux in any point as suggested by European regulations. Other areas that are not considered escape routes but are required to have emergency luminaires are the following: Elevators. Rest rooms for the public and people with special needs. ontrol rooms DURATION OF AUTONOMOUS OPERATION. The autonomous duration of the emergency luminaires should be such as to permit the safe evacuation of the building in the event of an emergency. The minimum requirement set by Greek regulations is 90 minutes. Health and social welfare buildings (hospitals, clinics, health centers e.t.c) require a minimum of 3hours. (The duration of autonomous operation, according to Greek regulations is 90 minutes. In other European countries such as Germany, England and Arabic countries the minimum autonomous duration is ours.) Near first aid stations. 10

12 GENERAL GUIDES DESIGNING When designing an emergency luminaire system, the following must be accounted for: Goal It is for escape routing or for standby illumination (emergency lighting) In the case of escape routing illumination we can simply follow the regulations rules, whereas in the case of emergency lighting we must take into account the real illumination requirement needed by a specific area (e.i The security office of a building) Regulations The regulations that must be adhered to are specific for each country. In many instances it is seen that regulations regarding even basic emergency luminaires systems are not adhered to. In these cases an installer must think of the probability the he may have to redesign and reinstall the whole system upon demand from local or European fire safety committees. Design requirements In order for escape routes to become obvious, indication signs are used where required. Upto know, signs had words written on then, for example EXIT. In modern days the signs must contain pictograms according to Euro norm 92/58/. Pictograms are used so that they are understandable by people that do not know the local language. The signs must comply to Euro Norms ΕΝ 1838 where color, size and maximum legible distance are specified signs that are illuminated from an external light source, the legible distance must be 100 times the height of the sign. Signs that are selfilluminated or are part of an emergency luminaire must have a legible distance that is 200 time the height of the sign. Height of edge illumination sign Viewing distance For example: In a corridor with a length of 20 meters we must install and indication sign with a height of at least 10cm at one end in order for it to be clearly visible in the other end. Types of signs according to 105/1995 standards 11

13 EMERGENY ING GENERAL GUIDES EXAMPLE OF INSTALLATION OF EMERGENY AND INDIATION LUMINAIRES 4 Direction indicating luminaire 3 Escape route emergency luminaire 2 Emergency luminaire with direction indicating legend 5 Water proof emergency luminaire installed in external areas 1 Emergency luminaire with direction indicating legend over a door OF EMERGENY LUMINAIRES On the following pages, there are many emergency luminaires that use LEDs as light source. In order to becomes comprehensible the equivalence between them and the ordinary luminaires that use lamps, bellow is a list with the light output of emergency luminaires with fluorescent lamps. The stated light output is the light output produced during emergency operation. TYPE Emergency luminaire with lamp 1x6W (T5) Emergency luminaire with 9 LEDs Emergency luminaire with lamp 1x8W (T5) Emergency luminaire with 12 LEDs Emergency luminaire with lamp 2x8W (T5) Emergency luminaire with 24 LEDs Emergency luminaire with lamp 1x11W (FL) Emergency luminaire with 21 LEDs Emergency luminaire with lamp 2x20W (Iodine) Emergency luminaire with 2x42 LEDs Emergency luminaire with lamp 2x55W (Iodine) Emergency luminaire with 2x6 Power Leds 50 lumen 75 lumen 85 lumen 100 lumen 170 lumen 200 lumen 150 lumen 175 lumen 580 lumen 790 lumen 2050 lumen 3200 lumen POWER FROM BATTERY 1,9W 0,65W 1,7W 0,9W 3,5W 2W 3,9W 1,75W 28W 7,5W 74W 28W 12 Technical specification are subject to change after the catalog has been published. For any clarifications please come in contact with our technical department

14

15 Slim LEDs light 18m IP40 The packaging contains: 12 pcs. Packaging dimensions (LxWxH): 315x265x205 After order the set of right/left screw hiding cups for GR2000 at white: at bronze: SELFTESTING MAINTAINED / NONMAINTAINED LED EMERGENY LUMINAIRE V A TYPE PITURE ODE BATTERY DURATION ONSUMPTION GR ,6V/1Ah Nid 27 h 3,8W/8,2VA 125/125 lm 420 gr. ΤΙΜΗ 55,00 AESSORIES TYPE ODE OLOUR DESRIPTION ΤΙΜΗ 2000/W White Set of right / left screw hiding cup for GR2000, white colour 1, /B Gold Set of right / left screw hiding cup for GR2000, bronze colour 3,50 Legends Selfadhesive legends below can be provided after order Photometric data GR2000, GR2000/BS S2000/ S65L S 2000/ S 2000/ S65R S65D Dimensions in mm For accessories turn to page

16 IP20 22m Slim LEDs light The packaging contains: 12 pcs. Packaging dimensions (LxWxH): 355x300x235 MAINTAINED (OR NONMAINTAINED) LED EMERGENY LUMINAIRE V A TYPE PITURE DIFFUSER ODE BATTERY DURATION ONSUMPTION ΤΙΜΗ GR2100 clear ,6V/600mAh Nid 3W / 2,7VA 40/100 lm 29,00 GR2100/OPAL Β opal ,6V/600mAh Nid 3W / 2,7VA 38/100 lm 29,00 GR2110 clear ,6V/1Ah Nid 3,5W / 3VA 40/100 lm 35,00 GR2110/OPAL Β opal ,6V/1Ah Nid 3,5W / 3VA 38/100 lm 35,00 WOODEN BASE TYPE ODE OLOUR ΤΙΜΗ WB2100/H herry 25,00 WB2100/N Natural cherry 25,00 WB2100/WN Walnut 25,00 Photometric data GR2100 Dimensions in mm Legends Selfadhesive legends below can be provided after order S21000/S65L S21000/S65R ,5 S21000/S65D For accessories turn to page

17 Slim & lassic Light 13m IP42 18m IP20 The packaging contains: 20pcs.(A) 16 pcs.(b) 16 pcs.() Packaging dimensions (LxWxH): 375x270x255mm ( & ) 315x265x205mm (Β) Accessories 235 A1012 Easy Base A1015 A3008 Opening required for suspended ceiling mounting 95 Base included in packaging for easy luminaire mounting Base for recessed mounting on suspended wall or ceiling (lassic Light) Base for recessed mounting on suspended ceiling (Slim Light) Legends Selfadhesive legends below can be provided after order Photometric data GR8/leds, GR9/leds S00801/S65L S00801/S65R S00801/S65D Slim S00800/S65L S00800/S65R S00800/S65D lassic Slim LEDs S10800/S65L S10800/S65R S10800/S65D 16

18 EMERGENY LUMINAIRES MAINTAINED / NONMAINTAINED LED EMERGENY LUMINAIRES V A TYPE PITURE ODE BATTERY DURATION ONSUMPTION GR8/leds GR9/leds A A ,6V/600mAh 2,4V/1,5AhNid 3,6V/1Ah 2,4V/3Ah Nid 1,5 2 h 4 3VA/2,7W 3,5VA/3W 65 40/100 lm lm 65 38/100 lm lm ΤΙΜΗ gr. 25, gr. 28,00 MAINTAINED / NONMAINTAINED LED EMERGENY LUMINAIRE V A WITH REMOTE ONTROL TYPE PITURE ODE BATTERY DURATION ONSUMPTION ΤΙΜΗ GR8/leds/R ,6V/600mAh Nid 3VA/2,7W 40/100 lm 390 gr. 28,00 MAINTAINED LED EMERGENY LUMINAIRE 42V A FOR ELEVATORS ΤΙΜΗ 3,6V/1,5Ah Nid 4,5VA 150/300 lm 680 gr. 68,00 TYPE PITURE ODE BATTERY DURATION ONSUMPTION GR119/6L/42V B MAINTAINED & NON MAINTAINED LED EMERGENY LUMINAIRES V A TYPE PITURE ODE BATTERY DURATION ONSUMPTION GR1513/L* B GR108/12L/90 B GR109/12L/180 B *Suitable for installation on ships 3,6V/1Ah Nid 3,6V/600mAh Nid 3,6V/1Ah Nid 3W/4 VA 2,5W/3VA 3W/3,5VA 30/75 lm 40/100 lm 38/100 lm ΤΙΜΗ 670 gr. 55, gr. 33, gr. 35,00 NONMAINTAINED EMERGENY LUMINAIRE V A WITH FLUORESENT LAMP TYPE PITURE ODE BATTERY DURATION ONSUMPTION WATT ΤΙΜΗ GR ,4V/1,5Ah Nid 3VA 6W 50 lm 465 gr. 29,00 AESSORIES TYPE PITURE ODE DESRIPTION ΤΙΜΗ 3008 B B Base for recessed mounting on suspended ceiling (Slim Light) Base for recessed mounting on suspended wall or ceiling (lassic Light) 6,00 7,60 Dimensions in mm Opening required for suspended ceiling mounting A1015 Base for recessed mounting on suspended wall or ceiling For accessories turn to page

19 Easy Light 22m IP40 B The packaging contains: 16 pcs. (), 15 pcs. (Β), Packaging dimensions (LxWxH): 430x375x275mm Mounting methods Dimensions in mm eiling mounting with SP116 marking sign (SP114 for the GR310) eiling or wall mounting 3018 mounting springs Opening required for suspended ceiling mounting 124 SP116 marking sign A3018 Suspended ceiling mounting springs A Recessed mounting on suspended ceiling with A3018 base and SP116 marking sign (SP114 for the GR310) Recessed mounting on suspended ceiling 3016 Recessed mounting base Legends Selfadhesive legends below can be provided after order Wall mounting with SP116 marking sign (SP114 for the GR310) Recessed mounting on wall S31101/ S65L S31101/ S65R S31101/ S65D Photometric data Easy Light/6P Easy Light/4P Easy Light/15L/30L o 90 0/180 90/ d o 90 0/180 90/270 o d 90 o 0/180 90/270 o d 90 o o 60 o 60 o 60 o 60 o 60 o o 30 o 0 o 30 o 30 o 0 o 30 o 30 o 0 o 30

20 EMERGENY LUMINAIRES MAINTAINED / NON MAINTAINED (internal selection without L1) LED EMERGENY LUMINAIRES V A 50/60 Hz TYPE PITURE ODE BATTERY DURATION ONSUMPTION ΤΙΜΗ GR310/12L/180/ ,6V/1Ah Nid 2,9W/3,2VA 38/100lm 780 gr. 34,00 GR310/12L/90/ ,6V/600mAh Nid 2,9W/3,2VA 40/100lm 765 gr. 31,50 GR310/15L/* ,6V/600mAh Nid 2,9W/3,2VA 40/100lm 765 gr. 31,50 GR312/15L/* ,6V/1,5Ah Nid 3,3VA 30/105 lm 700 gr. 40,00 GR310/30L/* ,6V/1,5Ah Nid 3,6VA 30/105 lm 780 gr. 48,00 GR312/30L/* ,6V/3Ah Nid 3,5VA 30/210 lm 780 gr. 53,00 GR309/15L/ ,6V/3Ah Nid 8 h 4,8VA 30/210 lm 880 gr. 55,00 SELFTESTING MAINTAINED LED EMERGENY LUMINAIRES V A 50/60 Hz TYPE PITURE ODE BATTERY DURATION ONSUMPTION GR315/15L/* GR316/15L/* GR315/30L/* GR316/30L/* GR308/15L/ GR315/4P/ GR315/6P/ GR316/4P/ GR316/6P/ A A A A A A A A A ,6V/600mAh Nid 3,6V/1,5Ah Nid 3,6V/1,5Ah Nid 3,6V/3Ah Nid 3,6V/3Ah Nid 4,8V/1,5Ah Nid 4,8V/3Ah Nid 4,8V/3Ah Nid 4,8V/4Ah NiΜΗ 8 h 7VA 7VA 7,5VA 8VA 7VA 11,5VA 14,5VA 13,5VA 15VA 105/105 lm 105/105 lm 210/210 lm 210/210 lm 125/125lm 150/300 lm 225/450 lm 150/300 lm 225/415 lm ΤΙΜΗ 740 gr. 50, gr. 57, gr. 59, gr. 67, gr. 67, gr. 70, gr. 85, gr. 80, gr. 105,00 NONMAINTAINED LED EMERGENY LUMINAIRES V A 50/60 Hz TYPE PITURE ODE BATTERY DURATION ONSUMPTION GR310/4P/ GR310/6P/ GR312/4P/ GR312/6P/ A A A A ,8V/1,5Ah Nid 4,8V/3Ah Nid 4,8V/3Ah Nid 4,8V/4Ah NiΜΗ 4VA 5VA 5VA 6VA 300 lm 450 lm 300 lm 415 lm ΤΙΜΗ 840 gr. 67, gr. 80, gr. 70, gr. 95,00 NONMAINTAINED EMERGENY LUMINAIRE V A 50/60Hz WITH FLUORESENT LAMP TYPE PITURE ODE BATTERY DURATION WATT ONSUMPTION ΤΙΜΗ GR310 Β ,4V/1,5Ah Nid 8W 2,5W/3VA 85 lm 845 gr. 36,00 AESSORIES TYPE PITURE ODE A3016 A DESRIPTION Recess mounting base Suspended ceiling mounting springs ΤΙΜΗ 200 gr. 9,00 10 gr. 2,00 * ΚΜ BS EN For accessories turn to page

21 omfort Light 20m IP42 The packaging contains: 15 pcs. Packaging dimensions (LxWxH): 385x285x295mm Mounting methods Dimensions in mm eiling mounting with SP115 marking sign eiling or wall mounting Opening required for suspended ceiling mounting 110 SP115 marking sign A mounting springs Suspended ceiling mounting springs A Photometric data GR421/3L, GR423/3L, GR408/3L, GR409/3L, GR414/3L, GR414/3L/24V GR421/6L, GR423/6L, GR408/6L, GR409/6L, GR414/6L, GR414/6L/24V Recessed mounting on suspended ceiling with A3018 base and SP115 marking sign Recessed mounting on suspended ceiling SP115 marking sign Wall mounting with SP115 marking sign Define the direction during the order of the sign: left, right or down GR421/12L, GR423/12L, GR427/12L, GR408/12L, GR409/12L, GR440/12L, GR414/12L, GR414/12L/24V Legends Selfadhesive legends below can be provided after order 20 S10800/ S65L S10800/ S65R S10800/ S65D

22 EMERGENY LUMINAIRES SELFTESTING MAINTAINED LED EMERGENY LUMINAIRES V A TYPE PITURE ODE BATTERY DURATION ONSUMPTION GR421/3L GR421/6L GR423/3L GR423/6L GR421/12L GR421/24L GR423/12L GR423/24L GR427/12L ,6V/1Ah Nid 3,6V/1,5Ah Nid 3,6V/1,5Ah Nid 3,6V/3Ah Nid 3,6V/600mAh Nid 3,6V/1Ah Nid 3,6V/1Ah Nid 3,6V/2Ah NiΜΗ 3,6V/3Ah Nid 8 h 7VA 7VA 7,5VA 7,5VA 6,5VA 7VA 6,5VA 7VA 7VA 150/150 lm 150/300 lm 150/150 lm 150/300 lm 100/100 lm 200/200 lm 100/100 lm 200/200 lm 100/100 lm ΤΙΜΗ 565 gr. 640 gr. 635 gr. 705 gr. 560 gr. 570 gr. 570 gr. 650 gr. 690 gr. 52,00 62,00 58,00 68,00 48,00 55,00 52,00 62,00 61,00 NONMAINTAINED LED EMERGENY LUMINAIRES V A TYPE PITURE ODE BATTERY DURATION ONSUMPTION GR408/3L GR408/6L GR409/3L GR409/6L GR408/12L** GR409/12L** GR440/12L A ,6V/1Ah Nid 3,6V/1,5Ah Nid 3,6V/1,5Ah Nid 3,6V/3Ah Nid 3,6V/600mAh Nid 3,6V/1Ah Nid 3,6V/3Ah Nid ** Maintained / Non maintained operation (internal selection without L1) 8 h 3VA 4VA 4VA 4,5VA 3VA 3,5VA 4,3VA 150 lm 300 lm 150 lm 300 lm 100 lm 100 lm 100 lm ΤΙΜΗ 615 gr. 690 gr. 690 gr. 755 gr. 590 gr. 600 gr. 770 gr. 41,00 50,00 51,00 65,00 30,00 32,00 52,00 AESSORIES TYPE PITURE ODE A DESRIPTION ΤΙΜΗ Suspended ceiling mounting springs 10 gr. 2,00 For accessories turn to page

23 Weather Light Waterproof emergency luminaires 24m IP65 The packaging contains: 12 pcs. Packaging dimensions (LxWxH): 500x375x315mm Mounting methods Legends Selfadhesive legends below can be provided on request Wall mounting S93593/ S65L ( ) S93593/ S65R ( ) S93593/ S65D ( ) Dimensions in mm 145 Photometric data GR938/30L, GR939/30L,, GR935/30L, GR936/30L, GR926/30L, GR 926/30L/24V, GR938/30L,GR935/30L, GR939/30L, GR926/30L, GR936/30L, GR926/30L/24V GR938/4P, GR939/4P, GR935/4P, GR936/4P, GR938/4P/60,GR 938/4P,GR939/4P, GR945/4P, GR936/4P GR938/6P, GR939/6P, GR935/6P, GR936/6P, GR938/6P,GR312/6P, GR945/6P, GR939/6P, GR936/6P, 22 A1017 All GR9xx series codes are also produced with aluminum profile with order code: GR9xx/AL All GR9xx series codes can also be provided with plastic double sided diffuser with order code: GR9xx/A1017.

24 WATERPROOF IP65 EMERGENY LUMINAIRES WATERPROOF IP65, SELFTESTING MAINTAINED LED EMERGENY LUMINAIRES V A TYPE PITURE ODE BATTERY DURATION ONSUMPTION GR938/15L GR938/30L GR939/15L GR939/30L GR938/4P GR938/6P GR939/4P GR939/6P GR940/15L ,6V/600mAh Nid 3,6V/1,5Ah Nid 3,6V/1,5Ah Nid 3,6V/3Ah Nid 4,8V/1,5Ah Nid 4,8V/3Ah Nid 4,8V/3Ah Nid 4,8V/4Ah NiMh 3,6V/3Ah Nid 8 h 7,5VA 8,5VA 6,8VA 8,2VA 8,10VA 8,4VA 7,7VA 8,5VA 7VA 125/125 lm 250/250 lm 125/125 lm 250/250 lm 150/300 lm 225/450 lm 150/300 lm 225/415 lm 125/125 lm 980 gr gr gr gr gr gr gr gr gr. ΤΙΜΗ 65,00 73,00 72,00 80,00 94,00 110,00 104,00 130,00 83,00 WATERPROOF IP65, NONMAINTAINED LED EMERGENY LUMINAIRES V A TYPE PITURE ODE BATTERY DURATION ONSUMPTION GR935/15L GR935/30L GR936/15L GR936/30L GR935/4P GR935/6P GR936/4P GR936/6P GR941/15L ,6V/600mAh Nid 3,6V/1,5Ah Nid 3,6V/1,5Ah Nid 3,6V/3Ah Nid 4,8V/1,5Ah Nid 4,8V/3Ah Nid 4,8V/3Ah Nid 4,8V/4Ah NiMh 3,6V/3Ah Nid 8 h 3VA 3VA 3VA 4,3VA 4VA 4,8VA 4,8VA 5,5VA 4VA 125 lm 250 lm 125 lm 250 lm 300 lm 450 lm 300 lm 415 lm 125 lm 1010 gr gr gr gr gr gr gr gr gr. ΤΙΜΗ 50,00 60,00 55,00 65,00 85,00 91,00 92,00 115,00 75,00 WATERPROOF IP65, NONMAINTAINED EMERGENY LUMINAIRE V A 50/60Hz WITH FLUORESENT LAMP TYPE PITURE ODE BATTERY DURATION ONSUMPTION ΙΣΧΥΣ ΛΜΠΣ ΤΙΜΗ GR ,4V/1,5Ah Nid 3VA 8W 85 lm 1060 gr. 51,00 Ο WATERPROOF IP65, SELFTESTING, LOW TEMPERATURE OPERATING (20 ) MAINTAINED LED EMERGENY LUMINAIRES V A (IDEAL FOR REFRIGERATORS & OLD ROOMS) TYPE PITURE ODE BATTERY DURATION ONSUMPTION GR938/30L/LT GR939/30L/LT ,6V/2Ah NiMH 3,6V/4Ah NiMH 33VA/31W 35VA/32W 250/250 lm 250/240 lm 1110 gr gr. ΤΙΜΗ 110,00 125,00 PLASTI DOUBLE SIDED DIFFUSER TYPE PITURE ODE DESRIPTION ΤΙΜΗ 1017 Β Plastic double sided diffuser 1060 gr. 14,00 EILLING BRAKET TYPE PITURE ODE DESRIPTION ΤΙΜΗ eilling Bracket for GR9xx/xxL 1060 gr. 25,00 For accessories turn to page

25 Weather Light Supercapacitor waterproof emergency luminaire 24m IP65 The packaging contains: 12 pcs. Packaging dimensions (LxWxH): 500x375x315mm innovation no use of batteries years guarantee Specifications for the new supercapacitor selftesting luminaire The GR900/30L/S has a power pack consisting of super capacitors and not conventional batteries. It has a total guarantee of 10 years. It is selftesting with advanced circuits for charging and discharging the capacitors. It has low consumption and a high Power Factor Mounting methods Legends Selfadhesive legends below can be provided on request Wall mounting S93593/ S65L ( ) S93593/ S65R ( ) S93593/ S65D ( ) Dimensions in mm Photometric data GR900/30L/S

26 SUPERAPAITOR WATERPROOF EMERGENY LUMINAIRE SUPERAPAITOR, WATERPROOF IP65, SELFTESTING, MAINTAINED LED EMERGENY LUMINAIRE V A TYPE PITURE ODE BATTERY DURATION ONSUMPTION ΤΙΜΗ GR900/30L/S Supercapacitor 1 h 7W/7,5VA 250 / 95 lm 1250 gr. 260,00 Using supercapacitors as energy storage media in place of conventional batteries is the most modern and sophisticated solution in emergency luminaires. Designed for, at least, 10 years of reliable function with much higher number of charging / discharging cycles. It can with stand much extreme temperature o o like 40 and 65 without serious degradation of it s specifications. omparing table Designed for Number of charging / discharging cycles Working temperature range Supercapacitor >10 years > o o 40 to 65 Nid battery 4 years o 0 55 NiMH battery 4 years o 5 55 GR900/30L/S has advanced microprocessor based circuits for all functioning blocks and sophisticated charging/discharging method that's targeting supercapacitor's longer life. A1017 All GR9xx series codes are also produced with aluminum profile with order code: GR9xx/AL All GR9xx series codes can also be provided with plastic double sided diffuser with order code: GR9xx/A

27 Double Easy & Rect light 1522m IP20 IP40 The packaging contains: 9 pcs. (A) 13 pcs. (Β) Packaging dimensions (LxWxH): 500x375x315mm (A) 545x395x345mm (B) Mounting methods Dimensions in mm Test Wall mounting eiling mounting 60 Special accessory used for mounting and installation purposes. This accessory is included in the package. It is fastened on the suitable notches and has space for the connection terminal and cable Wall or ceiling mounting Rect Light luminaires can be mounted on wall or ceiling surface. Special mounting accessories are included in packaging. 127 Legends Photometric data Selfadhesive legends below can be provided after order 0/180 d/1000lm o o o Double Easy S31100/ S65L S31100/ S65R S31100/ S65D (x2) o 120 o 90 o o 120 o 90 o 60 Included in packaging (x2) o 30 o 0 o 30 GR390/L, GR391/L, GR392/L, GR393/L 26 Rect

28 EMERGENY LUMINAIRES NONMAINTAINED LED EMERGENY LUMINAIRES V A TYPE PITURE ODE BATTERY DURATION ONSUMPTION GR391/L GR393/L ,6V/1,5Ah Nid 3,6V/3Ah Nid 3VA 4,3VA 270 lm 270 lm 1160 gr gr. ΤΙΜΗ 60,00 70,00 SELFTESTING, MAINTAINED LED EMERGENY LUMINAIRES V A TYPE PITURE ODE BATTERY DURATION ONSUMPTION GR390/L GR392/L GR736/21L Β GR736/6L Β ,6V/1,5Ah Nid 3,6V/3Ah Nid 3,6V/1,5Ah Nid 3,6V/3Ah Nid 7,5VA 8VA 7VA 7,5VA 270/270 lm 270/270 lm 175/175 lm 150/300 lm 1165 gr gr. 870 gr. 920 gr. ΤΙΜΗ 72,00 82,00 62,00 72,00 For accessories turn to page

29 Eco Light 15m 29m 37m MLD/ZLD28 MLD/ZLD34 MLD/ZLD44 Accessory for wall mounting (included in packaging) Β IP40 IP42 IP40 IP40 The packaging contains: 20 pcs. (MLD28, DLD28) 15 pcs. (MLD34, DLD34) Single package (ZLDxx) 2 click eiling mounting Mounting methods eiling mounting eiling mounting with extension rod 0,25 1m Easy mounting with special base for ZLD types Wall mounting ZLD28xx & ZL34xx A1130 (1m) A1131 (0,5m) A1132 (0,25m) A1133 After order Legends left or right down SW28/R (SLD, MLD & ZLD28) SW28/D SW34/R (SLD, MLD & ZLD34) SW34/D SW44/R (SLD, MLD & ZLD44) W44/D Accessories for MLD luminaires 1018/PL Recess mounting base for MLD/ZLD /PL Recess mounting base for MLD/ZLD /PL/ST Recess mounting base for selftesting MLD/ZLD /PL/ST Recess mounting base for selftesting MLD/ZLD34 Accessories contained in the package. Suitable for wall or ceiling mounting. Dimensions in mm Eco MLD28, DLD28: 283x130x25 MLD34, DLD34: 343x200x25 MLD44, DLD44: 443x250x Eco ZLD28, ZLD28/BS 290 x 152 x 38 ZLD34, ZLD34/BS: 350 x 220 x 38 ZLD44, ZLD44/BS: 450 x 272 x 38

30 EDGE ILLUMINATION SIGNS MAINTAINED LED EDGE ILLUMINATION SIGNS V A TYPE PITURE ODE BATTERY DURATION ONSUMPTION MLD28D/w* MLD34D/w* MLD44D/w* Β Β Β ,6V/1Ah Nid 3,6V/1Ah Nid 3,6V/1Ah Nid 3W/7,5VA 3W/8VA 3W/8VA 85/85 lm 105/85 lm 105/85lm 710 gr gr gr. ΤΙΜΗ 55,00 65,00 85,00 LED SIGNS FOR GENERAL USE V A TYPE PITURE ODE BATTERY DURATION ONSUMPTION MLD28S/g MLD34S/g MLD44S/g ,6V/1Ah Nid 3,6V/1Ah Nid 3,6V/1Ah Nid 3W/ 7,5VA 3W/8VA 3W/8VA 18/18 lm 22/18 lm 22/18 lm 670 gr gr gr. ΤΙΜΗ 57,00 67,00 87,00 SELFTESTING, MAINTAINED, LED EDGE ILLUMINATION SIGNS V A TYPE PITURE ODE BATTERY DURATION ONSUMPTION ZLD28/EM* ZLD34/EM* ZLD44/EM ,6V/1,5Ah ΝiMh 3,6V/1,5Ah ΝiMh 3,6V/1,5Ah ΝiMh 3,8W/6,5VA 4W/6,7VA 4,3W/6,9VA 125/125 lm 145/125 lm 200/150 lm 1075 gr gr gr. ΤΙΜΗ 80,00 95,00 115,00 AESSORIES TYPE ODE DESRIPTION ΤΙΜΗ 1018/PL Recess mounting base for MLD/ZLD gr. 10, /PL Recess mounting base for MLD/ZLD gr. 12, /PL/ST Recess mounting base for selftesting MLD/ZLD gr. 14, /PL/ST Recess mounting base for selftesting MLD/ZLD gr. 16,00 In June of 2012, EN adopted the international standard ISO 7010 regarding graphical symbols and safety signs. Since all safety signs are to be designed based on this standard, we will be able to recognize a safety exit in any European country. In our catalog you can find a wide variety of luminaires with safety signage based on the EN ISO 7010 standard. The signage used on products MLD28S/g, MLD34S/g and MLD44S/g does not comply with the latest European legislation and so can only be used as General Purpose Luminaires and not Emergency Escape Luminaires. All MLD, SLD and MLD types (except BS) can be converted in nonmaintained luminaires after pressing the TEST button. * ΚΜ BS EN For accessories turn to page

31 Lounge Light 15m 29m 37m SLD28 SLD34 SLD44 B IP30 IP30 Single package Mounting methods Legends left or right down SW28/R (SLD28) SW28/D SW34/R (SLD34) SW34/D SW44/R (SLD,44) W44/D eiling mounting Mounting springs 3018 Wall mounting Recessed mounting on suspended ceiling Opening required for suspended ceiling mounting A3018 Dimensions in mm Lounge SLD28/SP, SLD28/BS/SP: 289 x 180 x 34 SLD34/SP, SLD34/BS/SP: 343 x 250 x 34 SLD44/SP, SLD44/BS/SP: 443 x 300 x

32 EDGE ILLUMINATION SIGNS SELFTESTING, MAINTAINED, LED EDGE ILLUMINATION SIGNS V A TYPE PITURE ODE BATTERY DURATION ONSUMPTION SLD28/SP SLD34/SP SLD44/SP SLD28/DZ SLD34/DZ SLD44/DZ A A A B B B ,6V/1,5Ah ΝiMh 3,6V/1,5Ah ΝiMh 3,6V/1,5Ah ΝiMh 3,6V/1,5Ah ΝiMh 3,6V/1,5Ah ΝiMh 3,6V/1,5Ah ΝiMh 9VA 9,5VA 9,5VA 9VA 9,5VA 9,5VA 100/100 lm 125/125 lm 125/125 lm 100/100 lm 125/125 lm 125/125 lm 1050 gr gr gr. 980 gr gr gr. ΤΙΜΗ 85,00 95,00 105,00 85,00 98,00 105,00 In June of 2012, EN adopted the international standard ISO 7010 regarding graphical symbols and safety signs. Since all safety signs are to be designed based on this standard, we will be able to recognize a safety exit in any European country. In our catalog you can find a wide variety of luminaires with safety signage based on the EN ISO 7010 standard. The signage used on products MLD28S/g, MLD34S/g and MLD44S/g does not comply with the latest European legislation and so can only be used as General Purpose Luminaires and not Emergency Escape Luminaires. For accessories turn to page

33 Professional & Double Light 16 28m IP20 The packaging contains: 7 pcs. () 12 pcs. (Β) Packaging dimensions (LxWxH): 545x395x345mm (A) 445x350x295mm (Β) Accessories Dimensions in mm 205 A1012 Easy Base Base included in packaging for easy mounting 1013 Recessed mounting base for wall or ceiling mounting A1014 Double sided plastic diffuser (Double Light) 360 Opening required for suspended ceiling mounting Legends Selfadhesive legends below can be provided after order A1013 Suspended ceiling mounting base S11100/ S65L S11100/ S65R S11100/ S65D

34 EMERGENY LUMINAIRES SELFTESTING, MAINTAINED, LED EMERGENY LUMINAIRES V A TYPE PITURE ODE BATTERY DURATION ONSUMPTION GR515/15L GR516/15L GR115/15L GR116/15L B B ,6V/600mAh Nid 3,6V/1,5Ah Nid 3,6V/600mAh Nid 3,6V/1,5Ah Nid 7VA 7VA 7VA 7VA 125 lm/125 lm 125 lm/125 lm 125 lm/125 lm 125 lm/125 lm 1030 gr gr. 770 gr. 850 gr. ΤΙΜΗ 59,00 62,00 53,00 56,00 NONMAINTAINED / MAINTAINED LED EMERGENY LUMINAIRES (Internal selection Without L1) V A TYPE PITURE ODE BATTERY DURATION ONSUMPTION GR110/15L GR112/15L GR511/15L GR512/15L B B A A ,6V/600mAh Nid 3,6V/1,5Ah Nid 3,6V/1Ah Nid 3,6V/1,5Ah Nid 3VA 3VA 3,5VA 3,5VA 40/125 lm 38/125 lm 40/125 lm 38/125 lm 690 gr. 770 gr. 105 gr gr. ΤΙΜΗ 38,00 41,00 44,00 47,00 33

35 Project Light 1864m IP42 NEW Special base for easy mounting eiling mounting Single package Mounting methods Vertical wall mounting Parallel wall mounting eiling mounting with extension rod Special base for easy mounting eiling mounting Parallel wall mounting Vertical wall mounting only for GRL822/GRL824 eiling mounting with extension rod Accessories A1130 (1m) A1131 (0,5m) A1132 (0,25m) A1133 After order Accessory for wall mounting (included in packaging) 34

36 EMERGENY INDIATION LUMINAIRES SELFTESTING, MAINTAINED, LED EMERGENY INDIATION LUMINAIRES V A/5060Hz TYPE PITURE ODE BATTERY DURATION ONSUMPTION GRL822/EM GRL824/EM GRL832/EM GRL834/EM GRL842/EM GRL844/EM A A A A A A ,6V/1,5Ah Nid 4,8V/1,5Ah Nid 4,8V/1,5Ah Nid 4,8V/3Ah Nid 4,8V/1,5Ah Nid 4,8V/3Ah Nid 9,5VA 10VA 11VA 12,5VA 13,5VA 14VA 510/255 lm 510/255 lm 680/340 lm 680/340 lm 850/425 lm 850/425 lm 1680 gr gr gr gr gr gr. ΤΙΜΗ 120,00 124,00 140,00 148,00 160,00 180,00 GRXXX/O All the above models can be manufactured as one sided luminaires with sheet metal at the back of the luminaire Dimensions in mm Legends (GRL880, 84x) (GRL870, 83x) (GRL860, 82x) 40 S65L S65R S65U S65D For accessories turn to page

37 Light Box 1864m IP42 NEW Special base for easy mounting eiling mounting Single package Mounting methods Vertical wall mounting Parallel wall mounting eiling mounting Special base for easy mounting eiling mounting Parallel wall mounting Accessories A1130 (1m) A1131 (0,5m) A1132 (0,25m) A1133 After order Accessory for wall mounting (included in packaging) 36

38 EMERGENY INDIATION LUMINAIRES SELFTESTING, MAINTAINED, LED EMERGENY INDIATION LUMINAIRES V A/5060Hz TYPE PITURE ODE BATTERY DURATION ONSUMPTION GRL514/EM GRL522/EM A A GRL526/EM GRL532/EM A A GRL534/EM GRL542/EM A A GRL544/EM ,6V/1,5Ah Nid 3,6V/1,5Ah Nid 4,8V/1,5Ah Nid 4,8V/1,5Ah Nid 4,8V/3Ah Nid 4,8V/1,5Ah Nid 4,8V/3Ah Nid 8,5VA 9,5VA 10VA 11VA 12,5VA 13,5VA 14VA 250/125 lm 510/255 lm 510/255 lm 680/340 lm 680/340 lm 850/425 lm 850/425 lm 1420 gr gr gr gr gr gr gr. ΤΙΜΗ 105,00 130,00 135,00 165,00 170,00 180,00 190,00 GRXXX/O All the above models can be manufactured as one sided luminaires with sheet metal at the back of the luminaire Dimensions in mm Legends S65L S65R (GRL580, GRL542, GRL544) (GRL570,GRL532,GRL534) (GRL560,GRL522,GRL526) S65U S65D For accessories turn to page

39 3D & Tunnel Light 30m IP m IP65 c Single package GR415/4P, GR416/4P Mounting methods on ceiling for 3D Light Dimensions in mm Remove the screws Mounting base Side view Plan 34 cm 32 cm 30 cm 31 cm 27 cm 25.5 cm Step 1 ο Step 2 ο 31 cm 25.5 cm 27 cm 31 cm c m 75m GR577/L/15/ST/WP GR577/L/18/ST/WP

40 EMERGENY INDIATION LUMINAIRES WATERPROOF IP65, SELFTESTING, MAINTAINED LED EMERGENY INDIATION LUMINAIRES V A (FOR TUNNELS) TYPE PITURE ODE BATTERY DURATION ONSUMPTION GR577/L/15/ST/WP GR577/L/15/ST/WP/O GR577/L/18/ST/WP GR577/L/18/ST/WP/O GR578/L/15/ST/WP GR578/L/15/ST/WP/O GR578/L/18/ST/WP GR578/L/18/ST/WP/O B B B B B B B B ,8V/1,5Ah Nid 4,8V/1,5Ah Nid 4,8V/1,5Ah Nid 4,8V/1,5Ah Nid 4,8V/3Ah Nid 4,8V/3Ah Nid 4,8V/3Ah Nid 4,8V/3Ah Nid 11VA 11VA 13,5VA 13,5VA 12,5VA 12,5VA 14,5VA 14,5VA 680lm/340lm 680lm/340lm 850lm/425lm 850lm/425lm 680lm/390lm 680lm/390lm 700lm/350lm 700lm/350lm ΤΙΜΗ 7590 gr. 650,00 650,00 770,00 770,00 690,00 690,00 830,00 830,00 MAINTAINED, SELFTESTING, LED EMERGENY INDIATION LUMINAIRES V A/5060Hz TYPE PITURE ODE BATTERY DURATION ONSUMPTION GR415/4P GR416/4P A A ,8V/1,5Ah Nid 4,8V/3Ah Nid 11VA 14VA 460/460lm 460/460lm ΤΙΜΗ 3370 gr. 210, gr. 220,00 WATERPROOF IP65, SELFTESTING, MAINTAINED LED EMERGENY INDIATION LUMINAIRES (FOR TUNNELS) ο V A & 60 INDIATION ANGLE TYPE PITURE ODE BATTERY DURATION ONSUMPTION GR579/L/90/WP GR579/L/180/WP x4,8V/1,5Ah Nid 2x4,8V/3Ah Nid 22 VA 25VA 1360/680 lm 1360/680 lm ΤΙΜΗ 1.110, ,00 TYPE DESRIPTION ΤΙΜΗ GR57X/XW/WP/B All the above models can be manufactured with xenon beacon on top Κ/Π All the above luminaires are also manufactured as Maintained with fluorescent lamp and in a variety of dimensions according to the customer needs. Single sided luminaires are marked with /Ο at the end of product type. 39

41 ING GR21 2x21W Test charge Onoff power ING GR21 2x21W Test charge Onoff power Power Light A B IP65 IP42 D Ε Single package Mounting methods Dimensions, Β, D & Ε Wall mounting EMERGENY EMERGENY Legends Selfadhesive legends below can be provided after order (only for GRL22) S10800/ S65L S10800/ S65R S10800/ S65D Photometric data GRL29, GRL29/WP, GRL39, GRL39/WP GRL21/H/90, GRL21/H/180, GRL21/H/90/WP, GRL21/H/180/WP, GRL37/90, GRL37/180, GRL37/90/WP, GRL37/180/WP 40

42 HIGH POWER EMERGENY LUMINAIRES WITH LEAD BATTERY NONMAINTAINED LED EMERGENY LUMINAIRES TYPE PITURE ODE BATTERY DURATION ONSUMPTION GRL21 GRL29 GRL22 GRL21/H/90 GRL21/H/180 A A B B V/4Ah Pb 12V/7Ah Pb 12V/7Ah Pb 12V/7Ah Pb 2x12V/7Ah Pb 10 h 10VA 16VA 16VA 16VA 16VA SOURE 2x42 Leds 2x84 Leds 84 Leds 2x6P Leds 2x6P Leds 790 lm 1620 lm 710 lm 3200 lm 3200 lm ΤΙΜΗ 2205 gr. 105, gr. 160, gr. 125, gr. 210, gr. 270,00 WATERPROOF IP65, NONMAINTAINED LED EMERGENY LUMINAIRES TYPE PITURE ODE BATTERY DURATION ONSUMPTION SOURE GRL21/ H/90/WP D V/7Ah Pb 16VA 2x6P Leds 3200 lm GRL21/H/180/WP GRL29/WP D Ε x12V/7Ah Pb 12V/7Ah Pb 16VA 16VA 2x6P Leds 2X84 Leds 3200 lm 1620 lm ΤΙΜΗ 4510 gr. 240, gr. 290, gr. 178,00 SELFTESTING, NONMAINTAINED LED EMERGENY LUMINAIRES TYPE PITURE ODE BATTERY DURATION ONSUMPTION GRL37/90 GRL37/180 GRL39 B B A V/7Ah Pb 2x12V/7Ah Pb 12V/7Ah Pb 16VA 16VA 16VA SOURE 2x6P Leds 2x6P Leds 2X84 Leds 3200 lm 3200 lm 1620 lm ΤΙΜΗ 4360 gr. 220, gr. 268, gr. 178,00 WATERPROOF IP65, SELFTESTING, NONMAINTAINED LED EMERGENY LUMINAIRES TYPE PITURE ODE BATTERY DURATION ONSUMPTION SOURE GRL37/90/ WP D V/7Ah Pb 16VA 2x6P Leds 3200 lm GRL37/180/WP GRL39/WP D Ε x12V/7Ah Pb 12V/7Ah Pb 16VA 16VA 2x6P Leds 2X84 Leds 3200 lm 1620 lm ΤΙΜΗ 4520 gr. 250, gr. 280, gr. 195,00 41

43 ING GR21 2x21W Test charge Onoff power EMERGENY ING Test LAMP FAULT BATT FAULT POWER HARGE A Power Light B IP65 IP42 Ε D Single package Mounting methods Dimensions in mm Β &. & D. Ε Wall mounting EMERGENY Photometric data GR21, GR29, GR30, GR31, GR36, GR36/WP GR32, GR37, GR37/WP GR21/H 42

44 HIGH POWER EMERGENY LUMINAIRES WITH LEAD BATTERY NONMAINTAINED EMERGENY LUMINAIRES WITH INANDESENT LAMPS TYPE GR21 GR21/H GR29 PITURE A ODE BATTERY DURATION ONSUMPTION V/7Ah Pb 2x12V/7Ah Pb 2x12V/7Ah Pb 1 h 14VA 24VA 24VA 580 lm 1620 lm 580 lm LAMPS 2x20W 2x55W 2x20W 3870 gr gr gr. ΤΙΜΗ 105,00 220,00 160,00 WATERPROOF IP65, NONMAINTAINED EMERGENY LUMINAIRES WITH INANDESENT LAMPS TYPE GR30 GR31 GR32 GR21/H3* PITURE Ε ODE BATTERY DURATION ONSUMPTION V/7Ah Pb 2x12V/7Ah Pb 2x12V/9Ah Pb 4x12V/7Ah Pb 1 h *The GR21/Has a test button & a charge indication LED. 14VA 13VA 24VA 47VA 580 lm 580 lm 2050 lm 1380 lm LAMPS 2x20W 2x20W 2x55W 2x55W ΤΙΜΗ 3300 gr. 148, gr. 195, gr. 270, gr. 498,00 SELFTESTING, NONMAINTAINED EMERGENY LUMINAIRES WITH INANDESENT LAMPS TYPE GR36 GR37 GR39 PITURE ODE BATTERY DURATION ONSUMPTION V/7Ah Pb 2x12V/9Ah Pb 2x12V/9Ah Pb 1 h 14VA 24VA 24VA 580 lm 2050 lm 730 lm LAMPS 2x20W 2x55W 2x20W ΤΙΜΗ 3905 gr. 134, gr. 270, gr. 200,00 WATERPROOF ΙP65, SELFTESTING, NONMAINTAINED EMERGENY LUMINAIRES WITH INANDESENT LAMPS TYPE GR36/ WP GR37/WP GR39/WP PITURE Β D Β ODE BATTERY DURATION ONSUMPTION V/7Ah Pb 2x12V/9Ah Pb 1 h 2x12V/9Ah Pb 14VA 24VA 24VA 580 lm 2050 lm 730 lm LAMPS 2x20W 2x55W 2x20W ΤΙΜΗ 4050 gr. 160, gr. 270, gr. 270,00 43

45 Antiexplosive Light Ex d IIB T6 Gb Ex t III T85º Db IP67 Single packaging Description > Designed for installation in explosive atmospheres > ertified according to the norms EN , EN , EN > The main body is constructed of aluminum (painted yellow, RAL1003) and the diffuser from polycarbonate with UV protection or with special durable glass. > The luminaires that contain batteries have a charge indicator and connector for installing a remote test button. General characteristics > Nid batteries > High power illumination > Suitable for explosive gas atmospheres and explosive dust atmospheres > ΙΡ67 / ΙΚ 05 degrees of cover protection > harge indication LED > Produced in accordance with ΕΝ , ΕΝ , ΕΝ 55015, ΕΝ 61547, ΕΝ > onstruction material: Aluminum and Polycarbonate or Aluminum and glass (IFA3236). ο ο ο ο > Operation temperature range: 0 up to 40 the emergency luminaires, 20 up to 40 for the BS luminaires > omplying with the ΤΕΧ 94/9/E > Humidity: upto 95% relative humidity 44

46 ANTIEXPLOSIVE EMERGENY LUMINAIRES NONMAINTAINED EMERGENY LUMINAIRES WITH FLUORESENT LAMPS V A * TYPE PITURE ODE BATTERY DURATION LAMP DIFFUSER ONSUMPTION *FSA8202B *FSA8352B *FSA8203B A A A ,6V/1,5Ah 3,6V/4Ah 4,8V/4Ah 1 h 1 h 8 W 8 W 8 W 5mm glass 5mm glass 5mm glass 4,5VA 8,05VA 8,05VA 150 lm 280 lm 150 lm ΤΙΜΗ 595,00 640,00 630,00 SUSTAINED EMERGENY LUMINAIRES WITH FLUORESENT LAMPS V A * TYPE PITURE ODE BATTERY DURATION LAMP DIFFUSER ONSUMPTION *FSP2218 B ,8V/4Ah 1 h 18 W 9mm glass 8,05VA 500 lm *FSP3236P A ,8V/4Ah 1 h 36 W polycarbonate 53VA 1000 lm ΤΙΜΗ 730,00 815,00 EMERGENY LUMINAIRES FOR BS 230V WITH FLUORESENT LAMPS * TYPE PITURE ODE BATTERY DURATION LAMP DIFFUSER ONSUMPTION ΤΙΜΗ *IFA3236P A x36W polycarbonate 41,5VA 1215 lm 730,00 *IFA3236 A x36 W 9mm glass 74VA 3015 lm 12, ,00 gr. *IFA2218 B x18 W 9mm glass 41,5VA 1215 lm 835,00 *IFA2218P B x18 W polycarbonate 41,5VA 1215 lm 650,00 LED EMERGENY LUMINAIRES FOR BS 230V * TYPE PITURE ODE BATTERY DURATION LAMP DIFFUSER ONSUMPTION *IFA2218LB *IFA2118L B B x11W 1x11W 5mm glass 9mm glass 20,25VA 10,12VA 1476 lm 882 lm ΤΙΜΗ 985, ,00 SEALING GROMMET TYPE ODE DESRIPTION ΤΙΜΗ *NPT Sealing grommet 25,00 MOUNTING BASE TYPE ODE DESRIPTION ΤΙΜΗ *AFSA Mounting base 15,00 Dimensions in mm 115 D Legends Selfadhesive legends below can be provided on request S93593/ S65L ( ) S93593/ S65R ( ) S93593/ S65D ( ) 157 L IFA2218, IFA2218P, IFA2218LB, IFA2118L, FSP2118B: D=640, L=750. IFA3236, IFA3236P, FSP3236P: D=1250, L=1360. FSA8202B, FSA8352B, FSA8203B: D=375, L=485 * Trade product 45

47 Spot Light Β Suitable for installation in open areas IP42 Suitable for installation in escape routes IP42 D IP20 The packaging contains: 26 pcs. (, Β, ), 16 pcs. (D) Packaging dimensions (LxWxH): 430x375x275mm Mounting methods GR298 The specific luminaire has 2 rim options with perimeter dimensions. Bend the two springs so that they can pass through the suspended ceiling hole We push the spot luminaire upwards We keep on pushing until the luminaire fits into the hole The packaging contains: 16 pcs. for the: ΚΙΤ77/84 Packaging dimensions (LxWxH): 315x265x205 for the: ΚΙΤ77/84 Dimensions in mm A, B &. D Photometric data GR280, GR280/24V, GR290 GR298/30L/180 GR298/60L/90 46

48 EILING MOUNTED EMERGENY LUMINAIRES SELFTESTING, NON MAINTAINED, EILING MOUNTED LED EMERGENY LUMINAIRES TYPE PITURE ODE BATTERY DURATION ONSUMPTION GR290 GR291 GR292 GR293 Β Β ,8V/1,2Ah NiMh 4,8V/1,2Ah NiMh 4,8V/1,2Ah NiMh 4,8V/1,2Ah NiMh 3,5VA 3,5VA 3,5VA 3,5VA 270 lm 270 lm 160 lm 160 lm INSTALLATION Escape routes Open areas Escape routes Open areas ΤΙΜΗ 450 gr. 63, gr. 62, gr. 75, gr. 75,00 SET ELETRONI BALLAST GR77 WITH GR84 NONMAINTAINED WITH LED 1WATT TYPE PITURE ODE BATTERY DURATION ONSUMPTION ΤΙΜΗ ΚΙΤ77/84 D ,8V/1,2Ah NiMh up to 6VA 150 lm 310 gr.49,00 MAINTAINED, EILING MOUNTED LED EMERGENY LUMINAIRE When powered with 230VA the 60 LEDs/250 lm are illuminated whereas during emergency mode the 11LEDs/80lm are illuminated. TYPE PITURE ODE BATTERY DURATION ONSUMPTION ΤΙΜΗ MAINS/EMERG GR297/60L/ ,8V/1,2Ah NiMh 3,5VA 350/110 lm 533 gr. 70,00 SELFTESTING, NON MAINTAINED, EILING MOUNTED LED EMERGENY LUMINAIRES TYPE PITURE ODE BATTERY DURATION ONSUMPTION GR298/30L/180 GR298/60L/ ,8V/1,2Ah NiMh 4,8V/1,2Ah NiMh 3,5VA 3,5VA 170 lm 340 lm ΤΙΜΗ 530 gr. 78, gr. 70,00 47

49 onverters IP20 D Packaging: 16 pcs. (Β.) Paper box dimensions (LxWxH): 430x375x275 Dimensions in mm. Β, GR61: 200 x 27 x 26mm GR64: 275 x 37 x 36mm GR65: 163 x 27 x 26mm GR67: 215 x 37 x 36mm GR62: 205 x 27 x 49mm GR66: 160 x 27 x 49mm D TYPE GR4/UN/A966 GR4/UN/65 GR4/UN/66 GR4/UN/67 GR6/UN/61 GR6/UN/62 GR6/UN/64 18W (T8) 36W (T8) 58W (T8) 18W (OMPAT) 90 min. 180 min. 240 min. 70 min. 60 min. 90 min. 140 min. 120 min. 180 min. 180 min. 160 min. 240 min. 80 min. 60 min. 50 min. 80 min. 160 min. 120 min. 100 min. 160 min. 220 min. 160 min. 140 min. 220 min. 38W (2D/4PIN) 70 min. 140 min. 180 min. 60 min. 130 min. 170 min. 36W (OMPAT) 70 min. 140 min. 180 min. 70 min. 130 min. 180 min. 79W FL 60 min. LAMPS TYPE BATTERY 6W (Τ5) 8W (Τ5) 11W (FL) 13W (FL) 14W (T5) 18W (FL) 21W (T5) 24W (T5) 24W (FL) 28W (T5) 32W(IR) 32W (FL) 35W(T5) 36W(T8) 36W (FL) 49W(T5) 54W(T5) 55W(FL) 58W(T8) 80W(T5) DURATION GR1004A/61 4,8V 1,5Ah 90 GR1004 B/62 4,8V 3Ah GR1004 /71 8,4V 1,5Ah 90 GR1004 D/72 8,4V 3Ah 48 GR1004 E/ 81 GR1004 F/ 82 6V 1,5Ah 6V 3Ah 90

50 ONVERTERS ONVERTERS OMMON TO EMERGENY LUMINAIRES V A / 5060Hz (Τ5, Τ8, PL) TYPE PITURE ODE BATTERY DURATION ONSUMPTION GR4/UN/65 Β GR4/UN/66 Β GR4/UN/67 Β GR6/UN/61 Β GR6/UN/62 Β GR6/UN/64 Β GR4/UN/127/230/67 Β ,6V/1,5Ah Nid 3,6V/3Ah Nid 3,6V/4Ah Nid 4,8V/1,5Ah Nid 4,8V/3Ah Nid 4,8V/4Ah Nid 3,6V/4Ah Nid Packaging contains: 16 pcs. Paper box dimensions (LxWxH): 315x265x205mm see table see table see table see table see table see table see table 4VA 4VA 4VA 4VA 4VA 4VA 4VA 395 gr. 525 gr. 605 gr. 445 gr. 540 gr. 580 gr. 605 gr. ΤΙΜΗ 30,00 35,00 42,00 34,00 42,00 52,00 45,00 PROGRAMMABLE OMMON TO EMERGENY LED LUMINAIRE ONVERTER V A/ 5060Hz (LED volt output 2,535V with capability to connect 4,8V/1,5Ah or 3h battery) TYPE PITURE ODE BATTERY DURATION ONSUMPTION ΤΙΜΗ GR1104/40V/Β941/ΗΤ ,8V / 3Ah 1,5 or 3,5W/7VA 365 gr. 70,00 GR1104/40V/ Β973/HT ,8V / 1,5Ah 1,5 or 3,5W/7VA 365 gr. 62,00 PROGRAMMABLE OMMON LED LUMINAIRE TO EMERGENY LED LUMINAIRE ONVERTER 4,8V 1,5Ah/3Ah (LED volt output 1258V D) TYPE PITURE ODE BATTERY DURATION ONSUMPTION ΤΙΜΗ GR1107/60V D ,8V / 1,5 / 3Ah 1,5 or 4,75W/5VA 53,00 PROGRAMMABLE OMMON TO EMERGENY LED LUMINAIRE ONVERTER V A/ 5060Hz (LED volt output with capability to connect 4,8V/1,5Ah or 3h battery) TYPE PITURE ODE BATTERY DURATION ONSUMPTION ΤΙΜΗ GR1107/60V/B973/HT D ,8V / 1,5Ah 1,5 or 4,75W/5VA 400 gr. 65,00 GR1107/60V/B941/HT D ,8V / 3Ah 1,5 or 4,75W/5VA 480 gr. 75,00 PROGRAMMABLE OMMON TO EMERGENY LUMINAIRE ONVERTER FOR FLUORESENT LAMPS Τ5/Τ8 680W V A / 5060Hz (without battery) TYPE PITURE ODE BATTERY DURATION ONSUMPTION GR ,8 8,4 V / 1,5 4 Ah Packaging contains: 56 pcs. Paper box dimensions (LxWxH): 430x280x335mm 1 13VA 180 gr. ΤΙΜΗ 62,00 NON PROGRAMMABLE ONVERTERS FOR FLUORESENT LAMPS Τ5/Τ8 680W V A / 5060Hz TYPE PITURE ODE BATTERY DURATION ONSUMPTION GR1004A/61 GR1004B/62 GR1004/71 GR1004D/72 GR1004E/81 GR1004F/ ,8V/1,5Ah 4,8V/3Ah 8,4V/1,5Ah 8,4V/3Ah 6V/1,5Ah 6V/3Ah 13VA 13VA 13VA 13VA 13VA 13VA 425 gr. 510 gr. 520 gr. 695 gr. 240 gr. 360 gr. ΤΙΜΗ 65,00 75,00 80,00 95,00 70,00 80,00 49

51 Weather Spot Light Β IP40 IP40 IP65 D The packaging contains: 100 pcs. for the: GR83, 80/W, 80/W/S Packaging dimensions (LxWxH): 430x280x335 for the: GR83, 80/W, 80/W/S IP40 IP65 REHARGEABLE, NON MAINTAINED LED LUMINAIRES TYPE PITURE ODE BATTERY DURATION ONSUMPTION ΤΙΜΗ GR ,6V/120mAh NiMh 2VA 21 lm 100 gr. 11,00 REHARGEABLE, MAINTAINED LED LUMINAIRES TYPE PITURE ODE BATTERY DURATION ONSUMPTION GR82/230V GR82/230V/SQ GR82/WP/230V GR82/WP/230V/SQ B D B ,6V/120mAh NiMh 3,6V/120mAh NiMh 3,6V/120mAh NiMh 3,6V/120mAh NiMh 4VA 4VA 4VA 4VA 1 lm / 22 lm 1 lm / 22 lm 1 lm / 22 lm 1 lm / 22 lm ΤΙΜΗ 100 gr. 13, gr. 13, gr. 16, gr. 16,00 REHARGEABLE, WATERPROOF, WALL MOUNTED LED LUMINAIRES TYPE PITURE ODE BATTERY DURATION ONSUMPTION GR80/W A GR80/W/SL** A ** GR80/W/SL Silver case 6VA 6VA 30 lm 30 lm ΤΙΜΗ 100 gr. 12, gr. 28,00 Dimensions in mm GR82/230V/SQ, GR82/WP/230V/SQ GR83, GR80, GR80/SL GR82/230V GR82/WP/230V 50

52 IP20 Home Light The packaging contains: 20 pcs. (), 10 pcs. (Β) Packaging dimensions (LxWxH): 430x280x335 (), 495x190x90 (Β) REHARGEABLE, MAINTAINED LED LUMINAIRE V A TYPE PITURE ODE BATTERY DURATION ONSUMPTION GR11 B ,6V/120mAh NiMH 3VA 28 lm 85 gr. ΤΙΜΗ 11,00 PORTABLE, REHARGEABLE, MAINTAINED LED LUMINAIRE (BAKUP ING) TYPE PITURE ODE BATTERY DURATION ONSUMPTION GR60 A ,6V/1Ah Nid 4 14 h 2,5W/3VA up to 95 lm 565 gr. ΤΙΜΗ 32,00 Dimensions in mm

53 Addressable Light Addressable panel, addressable emergency luminaires & peripherals IP40 IP20 D Β Single packaging Description of GR6500 addressable panel > Up to 250 addressable emergency luminaires > Inhibit function for all luminaires > 16 zones > apability for connecting several panels on an ethernet network > The programming, control and testing of the system can be done using a web browser (Internet Explorer, Mozilla Firefox, hrome) HUB emergency luminaire 01 emergency luminaire 02 emergency luminaire 250 emergency luminaire 01 emergency luminaire 02 emergency luminaire 250 Dimensions in mm. D

54 ADDRESSABLE EMERGENY LUMINAIRES ADDRESSABLE LUMINAIRES ONTROL PANEL V / 5060Hz TYPE PITURE ODE BATTERY DURATION ONSUMPTION GR6500** V/7Ah >3h 25W/35VA 2000 gr. AESSORY FOR THE GR6500 PANEL TYPE PITURE ODE DESRIPTION GR8530 B Network card through ETHERNET AESSORY FOR THE GR6500 PANEL TYPE PITURE ODE DESRIPTION GR Addressable device for GR1004 ONSUMPTION <1mA ADDRESSABLE, SELF TESTING, MAINTAINED LED EMERGENY LUMINAIRES V / 5060Hz, EASY TYPE PITURE ODE BATTERY DURATION ONSUMPTION GR315/15L/ADR/* GR316/15L/ADR/* GR315/30L/ADR/* GR316/30L/ADR/* GR308/15L/ADR/ GR315/4P/ADR/ GR315/6P/ADR/ GR316/4P/ADR/ GR316/6P/ADR/ D D D D D D D D D ,6V/600mAh Nid 3,6V/1,5Ah Nid 3,6V/1,5Ah Nid 3,6V/3Ah Nid 3,6V/3Ah Nid 4,8V/1,5Ah Nid 4,8V/3Ah Nid 4,8V/3Ah Nid 4,8V/4Ah Nid 8 h 7VA 7VA 7,5VA 8VA 7VA 11,5VA 14,5VA 13,5VA 15VA 105/105 lm 105/105 lm 210/210 lm 210/210 lm 125/125lm 150/300 lm 225/450 lm 150/300 lm 225/415 lm 740 gr. 810 gr. 810 gr. 890 gr. 870 gr. 825 gr. 955 gr. 950 gr. 995 gr. ADDRESSABLE, NON MAINTAINED LED EMERGENY LUMINAIRES V / 5060Hz, EASY TYPE PITURE ODE BATTERY DURATION ONSUMPTION GR310/30L/ADR/ GR312/30L/ADR/ GR310/4P/ADR/ GR310/6P/ADR/ GR312/4P/ADR/ GR312/6P/ADR/ GR309/15L/ADR/ D D D D D D D ,6V/1,5Ah Nid 3,6V/3Ah Nid 4,8V/1,5Ah Nid 4,8V/3Ah Nid 4,8V/3Ah Nid 4,8V/4Ah Nid 3,6V/3Ah Nid 8 h 3VA 4VA 4VA 5VA 5VA 6VA 4,5VA 250 lm 250 lm 300 lm 450 lm 300 lm 415 lm 125 lm 855 gr. 945 gr. 840 gr. 925 gr. 925 gr. 975 gr. 950 gr. * ** ΚΜ BS EN KM BS EN

55 Addressable Light Addressable emergency luminaires IP65 Β Dimensions in mm. Β. Test

56 ADDRESSABLE EMERGENY LUMINAIRES ADDRESSABLE, WATERPROOF IP65, SELF TESTING, MAINTAINED LED EMERGENY LUMINAIRES, WEATHER TYPE PITURE ODE BATTERY DURATION ONSUMPTION GR938/15L/ADR GR938/30L/ADR GR939/15L/ADR GR939/30L/ADR GR938/4P/ADR GR938/6P/ADR GR939/4P/ADR GR939/6P/ADR GR940/15L/ADR ,6V/600mAh Nid 3,6V/1,5Ah? Nid 3,6V/1,5Ah Nid 3,6V/3Ah Nid 4,8V/1,5Ah Nid 4,8V/3Ah Nid 4,8V/3Ah Nid 4,8V/4Ah NiMh 3,6V/3Ah Nid 8 h 7,5VA 8,5VA 6,8VA 8,2VA 8,10VA 8,4VA 7,7VA 8,5VA 7VA 105/105 lm 210/210 lm 105/105 lm 210/210 lm 150/300 lm 225/450 lm 150/300 lm 225/415 lm 125/125 lm 980 gr gr gr gr gr gr gr gr gr. ADDRESSABLE, WATERPROOF IP65, NON MAINTAINED LED EMERGENY LUMINAIRES, WEATHER TYPE PITURE ODE BATTERY DURATION ONSUMPTION GR935/15L/ADR GR935/30L/ADR GR936/15L/ADR GR936/30L/ADR GR935/4P/ADR GR935/6P/ADR GR936/4P/ADR GR936/6P/ADR GR941/15L/ADR ,6V/600mAh Nid 3,6V/1,5Ah Nid 3,6V/1,5Ah Nid 3,6V/3Ah Nid 4,8V/1,5Ah Nid 4,8V/3Ah Nid 4,8V/3Ah Nid 4,8V/4Ah NiMh 3,6V/3Ah Nid 8 h 3VA 3VA 3VA 4,3VA 4VA 4,8VA 4,8VA 5,5VA 4VA 125 lm 250 lm 125 lm 250 lm 300 lm 450 lm 300 lm 415 lm 125 lm 1010 gr gr gr gr gr gr gr gr gr. ADDRESSABLE, SELF TESTING, MAINTAINED LED EMERGENY LUMINAIRES V A TYPE PITURE ODE BATTERY DURATION ONSUMPTION GR390/L/ADR Β GR392/L/ADR Β GR736/21L/ADR GR736/6L/ADR ,6V/1,5Ah Nid 3,6V/3Ah Nid 3,6V/1,5Ah Nid 3,6V/3Ah Nid 7,5VA 8VA 7VA 7,5VA 270/270 lm 270/270 lm 175/175 lm 150/300 lm 1165 gr gr. 870 gr. 920 gr. ΤΙΜΗ 55

57 Test charge Onoff power Addressable Light Addressable emergency luminaires IP65 IP42 IP30 Β D Ε F G H Ι Single packaging Dimensions in mm Eco ZLD28, ZLD28/BS 290 x 152 x 38 ZLD34, ZLD34/BS: 350 x 220 x 38 ZLD44, ZLD44/BS: 450 x 272 x 38 D & Ε Β & Lounge SLD28/SP, SLD28/BS/SP: 289 x 180 x 34 SLD34/SP, SLD34/BS/SP: 343 x 250 x 34 SLD44/SP, SLD44/BS/SP: 443 x 300 x 34 F, G, H & Ι EMERGENY ING GR21 2x21W 56

58 ADDRESSABLE EMERGENY LUMINAIRES ADDRESSABLE, SELF TESTING, MAINTAINED LED EDGE ILLUMINATION SIGNS V A TYPE PITURE ODE BATTERY DURATION ONSUMPTION ZLD28/EM/ADR* ZLD34/EM/ADR* ZLD44/EM/ADR ,6V/1,5Ah ΝiMh 3,6V/1,5Ah ΝiMh 3,6V/1,5Ah ΝiMh 6,5VA 6,7VA 6,9VA 125/125 lm 145/125 lm 200/150 lm 1075 gr. 102, gr. 117, gr. 137,00 ADDRESSABLE, SELF TESTING, MAINTAINED LED EDGE ILLUMINATION SIGNS V A TYPE PITURE ODE BATTERY DURATION ONSUMPTION SLD28/SP/ADR SLD34/SP/ADR SLD44/SP/ADR SLD28/DZ/ADR SLD34/DZ/ADR SLD44/DZ/ADR Β Β Β ,6V/1,5Ah ΝiMh 3,6V/1,5Ah ΝiMh 3,6V/1,5Ah ΝiMh 3,6V/1,5Ah ΝiMh 3,6V/1,5Ah ΝiMh 3,6V/1,5Ah ΝiMh 9VA 9,5VA 9,5VA 9VA 9,5VA 9,5VA 100/100 lm 125/125 lm 125/125 lm 100/100 lm 125/125 lm 125/125 lm 1050 gr gr gr. 980 gr gr gr. ADDRESSABLE, SELF TESTING, NON MAINTAINED HIGH POWER LED EMERGENY LUMINAIRES TYPE PITURE ODE BATTERY DURATION ONSUMPTION GRL37/90/ADR GRL37/180/ADR GRL39/ADR Ι Ι H V/7Ah Pb 2x12V/7Ah Pb 12V/7Ah Pb 16VA 16VA 16VA SOURE 2x6P Leds 2x6P Leds 2X84 Leds 3200 lm 3200 lm 1620 lm 4360 gr gr gr. ADDRESSABLE, WATERPROOF IP65, SELF TESTING, NON MAINTAINED HIGH POWER LED EMERGENY LUMINAIRES TYPE PITURE ODE BATTERY DURATION ONSUMPTION GRL37/90/ WP/ADR GRL37/180/WP/ADR GRL39/WP/ADR G G F V/7Ah Pb 2x12V/7Ah Pb 12V/7Ah Pb 16VA 16VA 16VA SOURE 2x6P Leds 2x6P Leds 2X84 Leds 3200 lm 3200 lm 1620 lm 4520 gr gr gr. ADDRESSABLE, SELF TESTING, NON MAINTAINED, EILING MOUNTED LED EMERGENY LUMINAIRES TYPE PITURE ODE BATTERY DURATION ONSUMPTION GR290/ADR GR291/ADR GR292/ADR GR293/ADR Ε D Ε D ,8V/1,2Ah NiMh 4,8V/1,2Ah NiMh 4,8V/1,2Ah NiMh 4,8V/1,2Ah NiMh 3,5VA 3,5VA 3,5VA 3,5VA 270 lm 270 lm 150 lm 150 lm INSTALLATION Escape routes Open areas Escape routes Open areas 450 gr. 450 gr. 450 gr. 450 gr. * ΚΜ BS EN

59 DALI Light Addressable DALI self testing emergency luminaires IP65 IP20 Β Ε F G D H Ι J Single package Description Dali (Digital Addressable Lighting Interface) is a luminaire communication protocol that can be used to monitor and control a luminaire network. It can monitor or control single or multiple luminaires and can be used to adjust various parameters such as light intensity, maximum light intensity as well as monitor the good operation of the luminaires. Via other Dali products, tests can be conducted by using Android cell phones, via Ethernet or via buttons. Advantages: Monitor and control luminaire networks via computer through USB or Ethernet. Monitor and control luminaires via Android cell phones. ontrol luminaires via a button. apability to convert common luminaires to Dali luminaires via programmable relays. apability to expand the DALI network via an already installed 230V mains grid.. Dimensions in mm Β

60 DALI EMERGENY LUMINAIRES DALI LED EMERGENY LUMINAIRES ONTROL UNITS TYPE PITURE ODE DESRIPTION ΤΙΜΗ Dali input unit Dali / USB Bridge DeeBridge BlueBridge Dali PL In Dali 4 x Relay Dali PL Dali power supply D J Ε F G H Ι Dali module with programmable inputs Dali to USB converter Ethernet to Dali converter Bluetooth to Dali converter Dali power line communication input module Dali module with 4 programmable relays Power line communication module Dali power supply 90,00 110,00 195,00 93,00 145,00 250,00 195,00 160,00 DALI ADDRESSABLE, SELF TESTING, MAINTAINED LED EMERGENY LUMINAIRES TYPE PITURE ODE BATTERY DURATION ONSUMPTION GR315/15L/DALI/ GR316/15L/DALI/ GR315/30L/DALI/ GR316/30L/DALI/ GR315/4P/DALI/ GR315/6P/DALI/ GR316/4P/DALI/ GR316/6P/DALI/ Β Β Β Β Β Β Β Β ,6V/600mAh Nid 3,6V/1,5Ah Nid 3,6V/1,5Ah Nid 3,6V/3Ah Nid 4,8V/1,5Ah Nid 4,8V/3Ah Nid 4,8V/3Ah Nid 4,8V/4Ah Nid 7VA 7,4VA 7,8VA 8,2VA 8,10VA 8,4VA 7,5VA 8,5VA 125/125 lm 125/125 lm 250/250 lm 250/250 lm 150/300 lm 225/450 lm 150/300 lm 225/415 lm 740 gr. 810 gr. 810 gr. 890 gr. 825 gr. 955 gr. 950 gr. 995 gr. ΤΙΜΗ 72,00 79,00 81,00 89,00 92,00 107,00 102,00 127,00 DALI ADDRESSABLE, WATERPROOF IP65, SELF TESTING, MAINTAINED LED EMERGENY LUMINAIRES TYPE PITURE ODE BATTERY DURATION ONSUMPTION GR938/15L/DALI GR938/30L/DALI GR939/15L/DALI GR939/30L/DALI GR938/4P/DALI GR938/6P/DALI GR939/4P/DALI GR939/6P/DALI GR940/15L/DALI ,6V/600mAh Nid 3,6V/1,5Ah Nid 3,6V/1,5Ah Nid 3,6V/3Ah Nid 4,8V/1,5Ah Nid 4,8V/3Ah Nid 4,8V/3Ah Nid 4,8V/4Ah NiMh 3,6V/3Ah Nid 8 h 7,5VA 8,5VA 6,8VA 8,2VA 8,10VA 8,4VA 7,7VA 8,5VA 7VA 125/125 lm 250/250 lm 125/125 lm 250/250 lm 150/300 lm 225/450 lm 150/300 lm 225/415 lm 125/125 lm 980 gr gr gr gr gr gr gr gr gr. ΤΙΜΗ 87,00 95,00 94,00 102,00 116,00 132,00 126,00 152,00 105,00 59

61 Test charge Onoff power DALI Light Addressable DALI self testing emergency luminaires 24100m IP65 IP42 D Ε F G Single packaging Dimensions in mm A Eco ZLD28, ZLD28/BS 290 x 152 x 38 ZLD34, ZLD34/BS: 350 x 220 x 38 ZLD44, ZLD44/BS: 450 x 272 x 38 D & Ε Γ. Β F & G Test EMERGENY ING GR21 2x21W

62 DALI EMERGENY LUMINAIRES DALI ADDRESSABLE, SELF TESTING, MAINTAINED LED EDGE ILLUMINATION SIGNS V A TYPE PITURE ODE BATTERY DURATION ONSUMPTION ZLD28/EM/DALI ,6V/1,5Ah ΝiMh ZLD34/EM/DALI ,6V/1,5Ah ΝiMh ZLD44/EM/DALI ,6V/1,5Ah ΝiMh 6,5VA 6,7VA 6,9VA 150/150 lm 175/150 lm 200/150 lm ΤΙΜΗ 1075 gr. 102, gr. 117, gr. 137,00 DALI ADDRESSABLE, SELF TESTING, MAINTAINED LED EMERGENY LUMINAIRES V A TYPE PITURE ODE BATTERY DURATION ONSUMPTION GR390/L/DALI GR392/L/DALI GR736/21L/DALI Β GR736/6L/DALI Β ,6V/1,5Ah Nid 3,6V/3Ah Nid 3,6V/1,5Ah Nid 3,6V/3Ah Nid 7,5VA 8VA 7VA 7,5VA 270/270 lm 270/270 lm 175/175 lm 150/300 lm ΤΙΜΗ 1165 gr. 94, ,00 gr. 870 gr. 84, gr. 94,00 DALI ADDRESSABLE, SELF TESTING, NON MAINTAINED EILING MOUNTED LED EMERGENY LUMINAIRES TYPE PITURE ODE BATTERY DURATION ONSUMPTION GR290/DALI GR291/DALI GR292/DALI GR293/DALI Ε D Ε D ,8V/1,2Ah NiMh 4,8V/1,2Ah NiMh 4,8V/1,2Ah NiMh 4,8V/1,2Ah NiMh 3,5VA 3,5VA 3,5VA 3,5VA 270 lm 270 lm 150 lm 150 lm INSTALLATION Escape routes Open areas Escape routes Open areas ΤΙΜΗ 450 gr. 85, gr. 84, gr. 97, gr. 97,00 DALI ADDRESSABLE, WATERPROOF IP65, SELF TESTING, NON MAINTAINED, HIGH POWER LED EMERGENY LUMINAIRES TYPE PITURE ODE BATTERY DURATION ONSUMPTION GRL37/90/ WP/DALI GRL37/180/WP/DALI GRL39/WP/DALI G G F V/7Ah Pb 2x12V/7Ah Pb 12V/7Ah Pb 16VA 16VA 16VA SOURE 2x6P Leds 2x6P Leds 2X84 Leds 3200 lm 3200 lm 1620 lm ΤΙΜΗ 4520 gr. 272, gr. 302, gr. 217,00 61

63 24V D Addressable central battery system > Output: 24V D > 300W 600W panels > 4 8 zones Β > apability for connecting several panels on an ethernet network > The programming, control and testing of the system can be done using a web browser (Internet Explorer, Mozilla Firefox, hrome) > Independent program for each zone for maintained or nonmaintained operation. HUB emergency luminaire emergency luminaire emergency luminaire emergency luminaire emergency luminaire emergency luminaire 300W / 24V D PANELS TYPE GR8600/300/4 GR8600/300/8 PITURE ODE DESRIPTION 300 Watt panel with 4 lighting circuits. Requires 2 bateries 12V/33Ah 300 Watt panel with 8 lighting circuits. Requires 2 bateries12v/33ah 600W / 24V D PANELS TYPE PITURE GR8600/600/8 ODE DESRIPTION 600 Watt panel with 8 lighting circuits. Requires 2 bateries 12V/55Ah PERIPHERALS 62 TYPE PITURE ODE DESRIPTION GR zone lighting circuit extension card for addressable luminaires BS 24V / 300 Watt GR8530 Β Network card through ETHERNET

64 24V D ADDRESSABLE ENTRAL BATTERY SYSTEM ADDRESSABLE LED EMERGENY LUMINAIRES 24V D EASY TYPE PITURE ODE DESRIPTION ONSUMPTION GR325/6P/24V/ADR/A GR324/15L/24V/ADR/A GR324/30L/24V/ADR/A Emergency Emergency Emergency 5,5W 1,1W 2,1W 580lm 125lm 250lm ADDRESSABLE LED EMERGENY LUMINAIRES 24V D EO TYPE PITURE ODE DESRIPTION ONSUMPTION DLD28/w/24V/ADR DLD34/w/ 24V/ADR DLD44/w/ 24V/ADR Emergency, indication 0,85W 100lm Emergency, indication 1,1W 125lm Emergency, indication 1,1W 125lm ADDRESSABLE LED EMERGENY LUMINAIRES 24V D EO TYPE PITURE ODE DESRIPTION ONSUMPTION ZLD28/24V/ADR/EM ZLD34/24V/ADR/EM ZLD44/24V/ADR/EM B B B Emergency, indication 1,3W 150lm Emergency, indication 1,5W 175lm Emergency, indication 1,6W 200lm ADDRESSABLE LED EMERGENY LUMINAIRES 24V D SPOT TYPE PITURE ODE DESRIPTION ONSUMPTION GR280/24V/ADR GR281/24V/ADR GR296/30L/BS/24V/ADR GR296/60L/BS/24V/ADR E D F F Emergency, ceiling mounted Emergency, ceiling mounted Emergency, ceiling mounted Emergency, ceiling mounted 2,2W 2,2W 2,7W 4,6W 270lm 270lm 250lm 500lm B A D Ε F 63

65 BS 24V D entral battery system Β > Output: 24V D In the mains and in emergency > W zones > 416 zones > apability for connecting several panels on an ethernet network > The programming, control and testing of the system can be done using a web browser (Internet Explorer, Mozilla Firefox, hrome) > Independent program for each zone for maintained or nonmaintained operation. HUB emergency luminaire emergency luminaire emergency luminaire emergency luminaire emergency luminaire emergency luminaire 300W / 24V D PANELS TYPE GR8500/300/4 GR8500/300/8 GR8500/300/12 GR8500/300/16 PITURE ODE DESRIPTION 300W panel with 4 lighting circuits. Requires 2 bateries 12V/33Ah 300W panel with 8 lighting circuits. Requires 2 bateries 12V/33Ah 300W panel with 12 lighting circuits. Requires 2 bateries 12V/33Ah 300W panel with 16 lighting circuits. Requires 2 bateries 12V/33Ah 600W / 24V D PANELS TYPE GR8500/600/8 GR8500/600/16 PITURE ODE DESRIPTION 600W panel with 8 lighting circuits. Requires 2 bateries 12V/55Ah 600W panel with 16 lighting circuits. Requires 2 bateries 12V/55Ah PERIPHERALS TYPE PITURE ODE DESRIPTION 64 GR8510 GR8530 Β zone lighting circuit extension card 24V / 300 Watt Network card through ETHERNET

66 BS 24V D LUMINAIRES LED EMERGENY LUMINAIRES 24V D EASY TYPE PITURE ODE DESRIPTION ONSUMPTION GR325/6P/24V D/A GR324/15L/24V D/A GR324/30L/24V D/A Emergency Emergency Emergency 5,4W 1,05W 2,05W 580 lm 125 lm 250 lm 700 gr. 700 gr. WATERPROOF IP65 LED EMERGENY LUMINAIRES 24V D WEATHER TYPE PITURE ODE DESRIPTION ONSUMPTION GR926/15L/24V D GR926/30L/24V D Β Β Emergency, IP65 Emergency, IP65 1,05W 2,05W 125 lm 250 lm 830 gr. 830 gr. LED EMERGENY LUMINAIRES 24V D RET TYPE PITURE ODE DESRIPTION ONSUMPTION GR736/21L/24V D Emergency 1,5W 175 lm 680 gr. LED EDGE ILLUMINATION SIGNS 24V D EO TYPE PITURE ODE DESRIPTION ONSUMPTION DLD28/BS/w/24V D DLD34/BS/w/24V D DLD44/BS/w/24V D D D D ZLD28/BS/24V D/EM ZLD34/BS/24V D/EM ZLD44/BS/24V D/EM Ε Ε Ε Emergency, indication Emergency, indication Emergency, indication Emergency, indication Emergency, indication Emergency, indication 0,8W 1,05W 1,05W 1,25W 1,45W 1,55W 100 lm 125 lm 150 lm 175 lm 200 lm 610 gr. 960 gr. 945 gr gr gr. LED EDGE ILLUMINATION SIGNS 24V D LOUNGE TYPE PITURE ODE DESRIPTION ONSUMPTION SLD28/BS/SP/24V D SLD34/BS/SP/24V D SLD44/BS/SP/24V D SLD28/BS/DZ/24V D SLD34/BS/DZ/24V D SLD44/BS/DZ/24V D F F F G G G Emergency, indication Emergency, indication Emergency, indication Emergency, indication Emergency, indication Emergency, indication 0,8W 1,05W 1,05W 0,8W 1,05W 1,05W 100 lm 125 lm 125 lm 100 lm 125 lm 125 lm 910 gr gr gr. 880 gr gr gr. EILING MOUNTED LED EMERGENY LUMINAIRES 24V D SPOT TYPE PITURE ODE DESRIPTION ONSUMPTION GR296/30L/BS/24V D J GR296/60L/BS/24V D J GR280/24V D Ι GR281/24V D H Emergency, ceiling mounted Emergency, ceiling mounted Emergency, ceiling mounted Emergency, ceiling mounted 2,7W 4,6W 2,1W 2,1W 250 lm 500 lm 270 lm 270 lm 320 gr. 320 gr. 320 gr. 320 gr. A B D F G Ε H Ι J 65

67 BS 24V AD LUMINAIRES D Β Ε F G H Ι J Dimensions in mm Ε Β F G. 145 & D H, Ι & J

68 BS 24V AD LUMINAIRES LED EMERGENY LUMINAIRES 24V AD EASY TYPE PITURE ODE DESRIPTION ONSUMPTION GR325/6P/24V AD/A GR324/15L/24V AD/A GR324/30L/24V AD/A F F F Emergency Emergency Emergency 5,9W/6,3VA 1,25W/1,4VA 2,6W/2,8VA 580 lm 125 lm 250 lm 700 gr. 700 gr. WATERPROOF IP65 LED EMERGENY LUMINAIRES 24V AD WEATHER TYPE PITURE ODE DESRIPTION ONSUMPTION GR926/15L/24V AD GR926/30L/24V AD G G Emergency IP65 Emergency IP65 1,5W/1,8VA 2,5W/2,8VA 125 lm 250 lm 830 gr. 830 gr. LED EMERGENY LUMINAIRES 24V AD RET TYPE PITURE ODE DESRIPTION ONSUMPTION GR736/21L/24V AD Ε Emergency 2,2W/2,5VA 175 lm 680 gr. LED EDGE ILLUMINATION SIGNS 24V AD EO TYPE PITURE ODE DESRIPTION ONSUMPTION DLD28/BS/w/24V AD DLD34/BS/w/24V AD DLD44/BS/w/24V AD ZLD28/BS/24V AD/EM ZLD34/BS/24V AD/EM ZLD44/BS/24V AD/EM Β Β Β Emergency, indication Emergency, indication Emergency, indication Emergency, indication Emergency, indication Emergency, indication 1,2W/1,5VA 1,5W/1,8VA 1,5W/1,8VA 1,4W/1,55VA 1,6W/1,75VA 1,85W/2,05VA 100 lm 125 lm 125 lm 150 lm 175 lm 200 lm 610 gr. 960 gr. 945 gr gr gr. LED EDGE ILLUMINATION SIGNS 24V AD LOUNGE TYPE PITURE ODE DESRIPTION ONSUMPTION SLD28/BS/SP/24V AD SLD34/BS/SP/24V AD SLD44/BS/SP/24V AD SLD28/BS/DZ/24V AD SLD34/BS/DZ/24V AD SLD44/BS/DZ/24V AD D D D Emergency, indication Emergency, indication Emergency, indication Emergency, indication Emergency, indication Emergency, indication 1,2W/1,5VA 1,5W/1,8VA 1,5W/1,8VA 1,2W/1,5VA 1,5W/1,8VA 1,5W/1,8VA 100 lm 125 lm 125 lm 100 lm 125 lm 125 lm 910 gr gr. 880 gr. EILING MOUNTED LED EMERGENY LUMINAIRES 24V AD SPOT TYPE PITURE ODE DESRIPTION ONSUMPTION GR296/30L/BS/24V AD J GR296/60L/BS/24V AD J GR280/24V AD Ι GR281/24V AD H Emergency, ceiling mounted Emergency, ceiling mounted Emergency, ceiling mounted Emergency, ceiling mounted 2,7W/3VA 4,6W/5,1VA 2,1W/2,3VA 2,1W/2,3VA 250 lm 500 lm 270 lm 270 lm 320 gr. 320 gr. 320 gr. 320 gr. 67

69 BS 230V A entral battery system > Output: 230V A In the mains and in emergency > VA panels > 48 zones Β > apability for connecting several panels on an ethernet network > The programming, control and testing of the system can be done using a web browser (Internet Explorer, Mozilla Firefox, hrome) > Independent program for each zone for maintained or nonmaintained operation. HUB emergency luminaire emergency luminaire emergency luminaire emergency luminaire emergency luminaire emergency luminaire 300VA/1h or 100VA/3h / 230V A PANELS TYPE PITURE ODE DESRIPTION GR9500/300/4 GR9500/300/ lighting circuits panel. Requires 2 bateries 12V/33Ah 8 lighting circuits panel. Requires 2 bateries 12V/33Ah 600VA/1h or 200VA/3h / 230V A PANELS TYPE PITURE ODE DESRIPTION GR9500/600/ lighting circuits panel. Requires 2 bateries 12V/55Ah PERIPHERALS TYPE PITURE ODE DESRIPTION GR9510 GR8530 Β zone lighting circuit extension card 230V / 300 Watt Network card through ETHERNET 68

70 BS 230V A LUMINAIRES LED EMERGENY LUMINAIRES 230V AD SLIM LEDs TYPE PITURE ODE DESRIPTION ONSUMPTION GR2000/BS Emergency 1,55W/1,78VA 125 lm 350 gr. LED EMERGENY LUMINAIRES 230V AD EASY TYPE PITURE ODE DESRIPTION ONSUMPTION GR324/4P/ GR325/6P/ GR324/15L/ GR324/30L/ Emergency Emergency Emergency Emergency 5,8W/6,9VA 6,5W/6,9VA 1,75W/2VA 2,9W/3,2VA 460 lm 580 lm 125 lm 250 lm 660 gr. 660 gr. 660 gr. 660 gr. WATERPROOF IP65 LED EMERGENY LUMINAIRES 230V AD WEATHER TYPE PITURE ODE DESRIPTION ONSUMPTION GR926/15L GR926/30L Β Β Emergency IP65 Emergency IP65 1,75W/2VA 2,9W/3,2VA 125 lm 250 lm 880 gr. 880 gr. LED EDGE ILLUMINATION SIGNS 230V AD EO TYPE PITURE ODE DESRIPTION ONSUMPTION ZLD28/BS/EM ZLD34/BS/EM ZLD44/BS/EM DLD28/BS/w DLD34/BS/w DLD44/BS/w Ε Ε Ε D D D Emergency, indication Emergency, indication Emergency, indication Emergency, indication Emergency, indication Emergency, indication 1,9W/2,1VA 2,2W/2,42VA 2,6W/2,86VA 1,5W/4,5VA 1,5W/4,5VA 1,5W/4,5VA 150 lm 175 lm 200 lm 100 lm 125 lm 125 lm 985 gr gr gr. 650 gr gr. 1620gr. LED EDGE ILLUMINATION SIGNS 230V AD LOUNGE TYPE PITURE ODE DESRIPTION ONSUMPTION SLD28/BS/SP SLD34/BS/SP SLD44/BS/SP SLD28/BS/DZ SLD34/BS/DZ SLD44/BS/DZ F F F G G G Emergency, indication Emergency, indication Emergency, indication Emergency, indication Emergency, indication Emergency, indication 1,35W/ 1,65VA 1,60W/ 1,9VA 1,60W/1,9VA 1,35W/1,65VA 1,60W/1,9VA 1,60W/1,9VA 100 lm 125 lm 125 lm 100 lm 125 lm 125 lm 930 gr gr gr. 930 gr gr gr. BS SYSTEM, WITH EXTERNAL LUMINAIRE TYPE ODE DESRIPTION KIT75/ Mains electronic converter GR75 with GR84 1W spot LED A B D Ε F G 69

71 BS 230V A LUMINAIRES Β D Ε F G Dimensions in mm Β, & D Ε. Πλάγια όψη Κάτοψη F cm 32 cm 30 cm 31 cm 27 cm 25.5 cm cm 25.5 cm 27 cm 31 cm GR57X/15W/WP GR57X/18W/WP G m 75m

72 BS 230V A LUMINAIRES LED EMERGENY INDIATION LUMINAIRES 230V AD 3D & TUNNEL TYPE PITURE ODE DESRIPTION ONSUMPTION GR424/4P GR576/L/15/WP GR576/L/15/WP/O GR576/L/18/WP GR576/L/18/WP/O GR575/L/WP E F F F F G Emergency, indication Emergency, indication Emergency, indication Emergency, indication Emergency, indication Emergency, indication 5,8W/6,1VA 7,2W/7,6VA 7,2W/7,6VA 8,8W/9,3VA 8,8W/9,3VA 14,4W/15,2VA 460lm 680lm 680lm 850lm 850lm 1360lm 3170 gr gr. EILING MOUNTED LED EMERGENY LUMINAIRES 230V AD SPOT TYPE PITURE ODE DESRIPTION ONSUMPTION GR296/30L/BS GR296/60L/BS D D Emergency, ceiling mounted Emergency, ceiling mounted 2,9W/3,15VA 4,9W/5,3VA GR Emergency, ceiling mounted 2,6W/3VA GR281 Β Emergency, ceiling mounted 2,6W/3VA 255lm 510 lm 270 lm 270 lm 250 gr. 250 gr. 250 gr. 250 gr. LED EMERGENY LUMINAIRES 230V AD RET TYPE PITURE ODE DESRIPTION ONSUMPTION GR736/6L/BS GR736/21L/BS A A Emergency Emergency 4,75W/5,05VA 340 lm 715 gr. 4,6W/4,9VA 175 lm 715 gr. 71

73

74 FIRE DETETION ONVENTIONAL SYSTEMS ADDRESSABLE SYSTEMS PERIPHERALS

75 FIRE DETETION GENERAL GUIDES DEFENITIONS Fire detection system. Is a group of devices that are used to detect fire hot spots and to give an alarm signal by audible, visual or other means. onventional fire detection systems. Are fire detection systems where the detectors and call points are divided into detection zones. The indications on the control panels, refer to detections zones and not individual devices. Analog addressable fire detection systems. Are fire detection systems where the sensors give analog signals for the phenomenon that they detect. The panel recognizes the exact point (address) of every device. Optical smoke sensor. Is a device that senses smoke using an optical method. (With an IR transmitter and receiver). This optical method does not use radioactive elements. Ionization detector. Is a device that detects smoke by current variations which run through the ionization smoke chamber. The detector s operation depends on the radioactive element (Am241). Beam detectors. These smoke detectors emit an Infrared beam inside the protected area. They consist of at least two parts which are placed at different locations and are used to cover large areas. Heat of rise detectors. Are devices that sense rapid temperature fluctuation Thermal detectors. Are devices that are activated when the temperature exceeds a predetermined level. Explosive gas detectors. Are devices that have a special sensor that is capable of detecting a specific category of explosive or toxic gases. There are several types of explosive gas detectors according to the type of gas that they detect Manual fire detection call points. Are devices that activate manually the central control panel. Siren/beacon. Is a device that is activated by the control panel and is used to warn with a strong audible and visual signal for the presence of a fire. Public address system. Is a device that is activated by the control panel and has the capability to transmit the siren s sound as well as verbal commands which can be heard in the covered areas. Electromagnetic door latches. Are devices that retain the fire doors open but release them in the event of a fire condition Remote sensor LED. Is a device that can be connected to one or more sensors and lights when one of them is activated in order to indicate the signal externally from the covered area. SYSTEM SELETION The selection of a suitable fire detection system In very large areas, where it is required that the panel essentially begins from the selection of the panel. shows information of the exact location of the sensors Without any general rules to adhere to, the total size of the that are activated, we must select an addressable system area, its usage, the construction material and certain special with one or more loops depending on the total covered requirements are factors that influence the size and the area. Each loop has specific capacity (191 or 240 devices, type of the panel. depending on the system) and can theoretically cover If we select a conventional system we begin by dividing approximately 5000 sqm. All the devices of the loop are the area into zones and taking care that: connected on a 2wire hook up arrangement by which they are powered and communicate with the panel. In Each zone does not have an area greater than 2000 sqm. order to prevent a fault from disrupting the operation of Each zone contains a clearly defined area (e.g. A floor the whole loop, line isolators are placed periodically level). between the detectors and the call points. The total electrical capability of the zone is not exceeded. The point of the fire can be easily located by someone that is in the vicinity of the zone. If the required zones do not exceed 6 and there is no need for future expansion of the system then we can select on the BS1632, BS1634 or BS636 panels. 74

76 GENERAL GUIDES INSTALLATION OF DEVIES Manual call points The selection of suitable installation points in general can be done by following these guides: No point in the covered area must be at a greater distance of 30m from a manual call point. They must be installed on the escape routes, in points that lead to stairs and near every exit that leads to external areas. The call points can be connected on the same zone as the sensors but care must be taken to avoid misoperation if a sensor is removed. If this is not possible due to the configuration of the zones, then they must be installed in a separate zone. They are installed at a height of about 1,2 to 1,5 meters and in clearly visible areas. Each call point must be adequately illuminated by the emergency illumination system. Selecting sensors Start by selecting the suitable type of sensor for each area. are must be taken to select the type of detector that will issue an alarm in the shortest time period from the time that the fire starts while simultaneously avoiding false alarms in normal operation. It is significant to find the golden mean between these two requirements in order to design a successful and reliable system. In most cases we can use as a guide the table found on page 52. Installing smoke, heat of rise and thermal detectors. The greatest quantity of smoke heat during a fire, will be concentrated in the highest points of the closed area. It is in these points that we must install the smoke and heat detectors. ertain areas & suitable detectors Area orridors Stair wells Elevators Offices general purpose areas onvention areas Reception areas Lobbies Halls Malls Theaters cinemas Storage areas Schools linics Surgeries Laboratories Machine shops Factories Repair shops hurches Telephone booths Kitchens electric ovens Boiler rooms Garages Gas kitchens Beverage preperation areas The most suitable Acceptable Smoke ** ** ** ** ** ** ** ** * ** ** ** ** ** ** Beam ** ** Detector Heat of rise When the ceiling of the area is level without interruptions from constructional beams then the mounting positions of the detectors can be calculated from the guides mentioned below: The area covered by a sensor must not be greater than 50 sqm. Τhe distance from an adjacent wall must not be more that 3.5 meters. The distance between two consecutive detectors must not exceed 12.5 meters. If the ceiling is interrupted by construction beams then each divided area must be designed separately from the others by adhering the prementioned rules. If the ceiling is inclined then we must surely install one line of detectors on the highest point. Installing gas detectors The concentration area of a particular explosive or toxic gas depends on its molecular weight. The heavy gases, those that have a molecular weight greater than 29, are concentrated near the ground. The lighter gases, those that have a molecular weight less than 29, concentrate near the ceiling. Gas detectors can be connected to the same zone with other types of detectors and manual call points. Due to the nature of the electrical installation (requires two more wires) and the different coping probably required by an alarm caused by gases, it is advisable from the beginning to install these detectors on zones that are independent from detectors and sensors of other types. The table below shows the most common explosives gases, their chemical formula and their molecular weight. Thermal ** * Explosive gas ** ** Explosive & toxic gases hemical Name formula Butane Propane Methane Hydrogen arbon monoxide Benzol Ethyl Alcohol Ammonia Hydrocloride arbon dioxide hloride dioxide Sulphur dioxide Hydro sulphor 4 H 10 3 H 8 H 4 H 2 Ο 6 H 6 2H5ΟΗ ΝH 3 HL O 2 LO 2 SO 2 H 2 S Molecular weight If we are called upon to sense heavy gases then the detectors must be placed approximately 30 centimeters from the ground and at a distance of no more than 4 meter in a horizontal direction from the probable leakage point. No obstacles, that interfere with the movement of the air, must be placed between the detector and the probable leakage point. To detect light gases, the detectors must be placed approximately 30 centimeters below the ceiling. No construction beams must exist between the detector and the probable leak point. Also care must be taken so the detector is not mounted: In areas with excessive humidity. In areas where it can come in contact with water. 75

77 FIRE DETETION GENERAL GUIDES Fire alarm indication and warning equipment. With this general title we mean all those devices which have a purpose of warning and indicating a fire alarm condition to the public. Such devices are sirens, beacons, bells, automatic telephone dialers and other special devices. Special care must be taken for the selection and the installation of the sirens. This device,,equal in value with the detectors of the system, is the peripheral that will warn the people responsible in order to intervene and the public to evacuate the premises. The number of sirens and the mounting positions can be calculated if we take into account the following: In a multistorey building at least one siren must be installed in each floor. The sound pressure level of the alarm system must be higher then the normal sound pressure usually found in each area. The sirens must be divided into two independant circuits. In this way, if one circuit fails there will always be a backup circuit to warn the public. The sirens must have a similar sound that must be different from other audible devices that operate in the building. If the alarm must wake sleeping people the sound pressure level must be 75dB at the height of the bed. In all siren installations it is advisable to install beacons as well. OTHER GUIDES Special attention should be given to the battery of the system. The battery type normally used is sealed lead acid (Pb). It s maximum life span is about 4 years, but depends on the discharge cycle. Normally after this time period it must be replaced. The panel has a special circuit that warns us about the battery condition. The battery should have a suitable capacity in order to permit the system to operate for 36 hours during a power failure and 30 minutes during an alarm condition. ables. onventional fire detection system do not have any special requirements concerning the types of cables that they use for connecting their devices. In general, a flexible cable with a cross section of 0,75mm2 is suitable for connecting the zones. For connecting the sirens where the power requirements are greater, it is required that the cable s cross section is 1,5mm2. In analog addressable systems, where loops are used, the cable must contain and external shield (e.g. LiYY) that is connected to the mains power supply ground terminal. The diagram shows an example of installing and connecting a typical fire detection system Siren group 1 Siren group 2 Zone 1 Zone 2 Zone 3 76

78 GENERAL GUIDES INSPETION AND SYSTEM MAINTENANE By the proper installation of all devices on a fire detection system we ensure it s proper first time operation. In order for the system to be reliable it must be inspected and maintained regularly. The central panel has indications of all faults in the system that can degrade it s effectiveness. When a fault indication is observed, certain precautionary measures should be taken to restore the good operation of the system. Battery fault indication. This means that the battery is either disconnected or does not charge correctly. In this fault condition, the system will not operate or will have a very limited duration. Every alarm signal that is not caused by a fire condition must be investigated and the causes that produced the alarm must be found in order to prevent false alarms. The most common faults and their consequences in a conventional The correct operation of the system must be verified once a fire detection system are: week by activating the system using a different manual call Zone fault indication. This means a short or open circuit of the cables point each time. that belong to the zone. It can also mean that a detector was removed Each time the area is rearranged, the system s devices must be from it s base. The area that is covered by this specific zone in reality is checked for good operation. not monitored or in the best cases it is not fully monitored. Finally, once a year the system must be inspected by activating Siren fault indication. This means an open or short circuit of the it from each sensor or call point position. cables that power the sirens. All or some of the sirens may not be able to operate when there is an alarm condition. In this case the alarm may not be heard in some areas. FIRE DETETION SYSTEM MAINTENANE ROUTINE Generally Initially there must be an agreement between the user and/or owner and the manufacturer, supplier or other competent body for supervision, maintenance and repair of the system. The agreement must provide access to the installations and specify the length of time allowed for the restoration of the equipment function after fault. The name and the telephone number of the maintenance organization must be fixed next to the central panel. A sufficient maintenance procedure includes daily, monthly, quarterly and yearly checks performed by the user or the special maintenance person as described below. Daily checks The user and/or owner must ensure that the following daily checks are performed: a.that the panel indicates that it is in idle mode or that every change of the idle mode has been registered in the event table and a report was made where necessary to the competent body. b.that the necessary attention was paid to every alarm registered until the previous working day. c.that, where necessary, every flawed operation of the system was repaired. Every fault must be registered in the event table and the necessary corrective actions must be taken the soonest possible. Monthly checks At least once a month the user and/or owner must ensure that: a.every standby generator, required according to the regulation, works and the fuel levels have been checked, and where necessary, have been refilled. b.stationery and supplies in ink or band for each printer are sufficient. c.the indications (LEDS, Display) of all the indicators work properly or that every deficient/defective function was registered. Any deficiency/fault noticed must be registered in the event table and the necessary corrective action must be taken the soonest possible. Quarterly checks At least once every three months the user and/or owner must ensure that someone trained: a.hecks all the entries in the event table and takes the necessary actions so that the system works properly. b.activates at least one detector or one button in every zone and checks whether the control and indication system receives and produces the right signal, the alarm sounds and every other warning or assisting device works. NOTE. A procedure must be adopted to secure that harmful functions (like the automatic extinguishment) are not performed when there is a quarterly check. c.looks for connection faults with all the control and indication devices (e.g. repetitive and mimic panels, answering machines). d.hecks the correct function and indication of the fire security door retaining and releasing devices. e.if permitted, operates every fire brigade or other signal receiving centre calling system. f.also performs all the extra checks, if they are foreseen by the system's installer, supplier or manufacturer. g.is informed if there have been building changes or installations that affect the requirements of the place in button, detectors or sirens. If there have been such changes, a visual inspection is performed. Any lack, fault, requirement for position changes or equipment addition observed must be registered in the event table and the necessary corrective action must be taken the soonest possible. Yearly checks At least once a year, the user and/or owner must ensure that someone trained: a.hecks if the required daily, monthly and quarterly checks have taken place. b.hecks one by one all the detectors to see if they work properly (using smoke spray, hot air or other means the manufacturer proposes). NOTE. Alternatively, a 25% of the detectors (different every time) may be checked in every quarterly check, so that all detectors have been checked at least once a year. c.hecks if the control and indication devices can perform any assisting function. NOTE. A procedure must be adopted to guarantee that harmful functions (like the automatic extinguishment) are not performed when there is a yearly check. d.performs a visual check of all the cables and the rest of the equipment to ensure they are in good condition and adequately protected. e.hecks, by site inspection, for building changes or installations that affect the function of the button, the detectors and the sirens. The site inspection must certify that there is clear space of at least 0.5 metres towards every direction for each detector and that the buttons are in good condition, visible and easily accessible. f.hecks all the batteries. Any lack, fault, requirement for position changes or equipment addition noticed must be registered in the event table and the necessary corrective actions must be taken the soonest possible. Special care must be taken so that all devices are reinstalled properly after every check. 77

79 Fire Sys onventional fire detection systems IP30 Description > BS1632, BS1634, BS1636, BS636. Fire detection panels with 2, 4 and 6 zones respectively. They have uniform operations, controls and indications. They all have 2 siren outputs, alarm relay, programmable telephone dialer output. BS636 panel is certified by Dimensions in mm BS1632, BS1634, BS1636, BS636 Recess mounting box

80 ΣΥΜΒΤΙΚA ONVENTIONAL ΣΥΣΤHΜΤ ΠΥΡΝIΧΝΕΥΣΗΣ FIRE DETETION SYSTEMS FIRE DETETION PANELS WITH 2, 4 & 6 ZONES TYPE PITURE ODE BS1632 B BS1634 B BS1636 B DESRIPTION 2 zone fire detection panel 4 zone fire detection panel 6 zone fire detection panel TEHNIAL SPEIFIATIONS FOR 2, 4 & 6 ZONES FIRE DETETION PANELS TYPE ODE DESRIPTION OPERATION VOLTAGE ONSUMPTION BATTERY HARGING IRUIT DURATION ZONE IRUITS ALARM IRUITS S RELAYS OPERATION TEMPERATURE HUMIDITY (without battery) PROD. IN AORDANE WITH BS zone fire detection panel 2 circuits monitored for short and open circuit conditions (max. current 35mA) BS1634 BS zone fire detection panel 6 zone fire detection panel VA/50Hz 50 VA Two 12V Lead acid sealed 2.6Ah Stabilized power supply 27.6V / max. 400mA 72 hours (Maximum connected detectors 72 and no load at output 24VM and 24VP) 4 circuits monitored for short and open circuit conditions (max. current 35mA) Two 24V circuits that are monitored for open and short circuit conditions (maximum current 300mA each). Each output is protected with a selfreseting electronic fuse. Three relays contacts are rated at 30VD and 5A maximum each. Under no circumstances should voltages or currents outside limits be connected. All relays output must be protected with a fuse of the same rating. Ο 0 up to 50 Up to 95% relative humidity 2040gr (4030gr with battery) EN 542, EN circuits monitored for short and open circuit conditions (max. current 35mA) ONVENTIONAL FIRE DETETION PANEL WITH 6 ZONES TYPE PITURE ODE DESRIPTION BS636 A zone fire detection panel TEHNIAL SPEIFIATIONS FOR FIRE DETETION PANEL WITH 6 ZONES TYPE ODE DESRIPTION OPERATION VOLTAGE ONSUMPTION BATTERY HARGING IRUIT DURATION ZONE IRUITS ALARM IRUITS S RELAYS OPERATION TEMPERATURE HUMIDITY (without battery) PROD. IN AORDANE WITH BS636 BS zones fire detection panel VA/50Hz 48 VA 12V/7Ah 13.8V / 400mA 36 hours (without using the outputs 24V_M and 24V_P) 6 zones Two 24V circuits that are monitored for open and short circuit conditions 1 Alarm relay, 1 relay per zone, 24V permanent 24V reset interrupted Ο 0 up to 50 Up to 95% relative humidity 2040gr (4030gr with battery) EN 542, EN 544 PERIPHERAL DEVIES TYPE A632* ODE DESRIPTION Recess wall mounting base for BS1632/1634/1636/636 * Trade products 79

81 Fire Sys onventional fire detection systems IP20 IP30 Description > Fire Detection Panels 8, 12, and 16 Zones > 8, 12 and 16 zone fire detection panels with identical operation and indications. > Programming and monitoring is done using a graphical display. > Fully programmable depending on the requirements of each installation, providing detailed event information. > They also have an events history memory. > All panels incorporate 2 outputs for sirens, an alarm relay, a fault relay and an auxiliary relay. > Ethernet control and programming capability (card GR8530). BS1619 FIRE DETETION SET D > This set contains all the devices required for installing a small fire detection system in limited areas (small shops, houses). The BS1619 set contains: > BS1632 conventional fire detection control panel > x2 A920 batteries 12V/2.6Ah for the panel > BS655 smoke detector > BS660 heat of rise detector > BS536 manual call point > BS531 siren with beacon. 80

82 ONVENTIONAL FIRE DETETION SYSTEMS FIRE DETETION PANELS WITH 8,12 & 16 ZONES TYPE PITURE ODE DESRIPTION BS zone fire detection panel with display BS zone fire detection panel with display BS zone fire detection panel with display TEHNIAL SPEIFIATIONS FOR FIRE DETETION PANELS WITH 8,12 & 16 ZONES TYPE ODE DESRIPTION OPERATION VOLTAGE ONSUMPTION BATTERY HARGING IRUIT DURATION ZONE IRUITS ALARM IRUITS TOTAL POWER OPERATION TEMPERATURE HUMIDITY (without battery) PROD. IN AORDANE WITH BS circuits that monitor open and shortcircuit conditions (maximum current 35mA) BS1642 BS fire detection panel VA/50Hz 100 VA 2 sealed lead acid batteries 12V / 7Ah Stabilized power supply 27,6V / 350mA 72 hours (Maximum number of connected detectors 220 and 16 zones, no loads connected to the 24V M and 24VP outputs) with two 12V/7Ah batteries. 12 circuits that monitor open and shortcircuit conditions (maximum current 35mA) The total output power (zone circuits, siren circuits, outputs 24P and 24M) must not exceed 1A. Ο 0 up to 50 Up to 95% relative humidity 16 circuits that monitor open and shortcircuit conditions (maximum current 35mA) Two 24V circuits that are monitored for open and shortcircuit conditions (The maximum current for each circuit is 300mA ). Each output is protected by a resetable electronic fuse gr gr gr. EN 542, EN 544 EXTENSION ARDS TYPE PITURE ODE DESRIPTION BS BS zones extension card for BS zones extension card for BS1642 PERIPHERAL DEVIES TYPE PITURE ODE DESRIPTION GR8530 Β Network card through ETHERNET ARD WITH 4ZONE RELAYS TYPE PITURE ODE DESRIPTION BS ard with 4zone relays for BS1638, BS1642, BS1646 BS1619 FIRE DETETION SET FIRE DETETION SET TYPE PITURE ODE BS1619 D DESRIPTION Fire detection accessories set * Trade products 81

83 Fire extinguishing panels & accessories Β D E IP40 IP20 IP65 Description > BS627. Fire extinguishing panel, 1 command with 4 zones > The panel has: > One fire extinguish output monitored for open and short circuit. The output can operate with actuators or electro valves > Two cross zones for fire detectors > One zone for a manual call point to start the extinguish procedure > One zone for a manual call point to cancel the extinguish procedure > Three modes of operation > The panel has two independent siren outputs > One contact relay for fault status > Two fully programable relay contacts > Terminals to communicate with conventional fire detection panels > The battery A986 (12V/7Ah) is required for the operation of the panel. > Devices that can be used by a person to signify a fire alarm. They are required in every fire alarm system. In every fire alarm system a call point is located beside the main fire alarm panel and the rest near stair and exits in well distinct points that are easily accessible be people abandoning the area. > BS533. A call point used for activating fire extinguishing units and is suitable for interior use. > BS534. A call point used for activating fire extinguishing units and is suitable for interior use. It has an isolation lock. If the lock s key is placed in the OFF position, the call point event if it is activated, does not activate the fire extinguishing unit. 82

84 FIRE EXTINGUISHING PANELS & AESSORIES FIRE EXTINGUISHING PANEL TYPE PITURE ODE DESRIPTION BS Fire extinguish panel, 1 command with 4 zones TEHNIAL SPEIFIATIONS FOR BS627 FIRE EXTINGUISHING PANEL TYPE ODE DESRIPTION OPERATION VOLTAGE ONSUMPTION BATTERY HARGING IRUIT DURATION ZONE IRUITS ALARM IRUITS OPERATION TEMPERATURE HUMIDITY PROD. IN AORDANE WITH BS Fire extinguish panel, 1 command with 4 zones V A 50/60Hz 30VA One or two 12V Lead acid sealed 7Ah maximum Stabilized power supply 13,8V/400mA 48 hours with 1 battery / 72 hours with 1 batteries 4 zones Two 24V circuits that are monitored for open and short circuit conditions ο 0 up to 50 up to 95% 4680 gr. ΕΝ FIRE EXTINGUISHING AESSORIES TYPE PITURE ODE DESRIPTION BS533 D Extinguishing call point BS533/WP E Waterproof IP65 extinguishing call point BS Extinguishing call point with isolation lock ΒΟΧ534 Β Panic button waterproofing case Packaging contains: 54 pcs. (BS533, BS534) Paper box dimensions (LxWxH): 430x280x335mm (BS533, BS534) Dimensions in mm BS533, BS BS

85 onventional fire alarm call points & detectors IP20 IP40 D J Ε F G H Desription > BS536. This call point is used to activate the system manually. When it is pressed, the clear protective cover gives way and the fire detection system is triggered. A special key can be used to reset the cover to its original position. The device contains all symbols that are required by the European norm EN54 and is suitable for interior use and is certificated by EVPU. > BS536/WP. Waterproof IP 65. It has the same operation as BS536. > BS655. The optical smoke sensor (or smoke particle detector) is activated when the obscuration rate caused by the smoke exceeds 3% per meter. > BS657. Double technology sensor. It can be used to monitor an area of about 2530 sqm. ο > BS668. The heat detector is activated when the temperature of the monitored area exceeds 60. It can be used to monitor an area of about 50 sqm. > Base6024.This special base has an incorporated relay which is activated when the detector issues an alarm. It can be used to control devices (i.e. Sirens, Beacons) which must be activated in the event of an alarm condition. Dimensions in mm BS536/WP BS655,BS660,BS668

86 1010a 1010a ONVENTIONAL DETETORS & ALL POINTS ONVENTIONAL ALL POINTS TYPE PITURE ODE DESRIPTION ONSUMPTION BS536 F Manual call point with TESTRESET key BS536/WP Ε Waterproof IP 65, fire extinguishing call point Packaging contains: 54 pcs. Paper box dimentions (LxWxH): 430x280x335mm ONVENTIONAL DETETORS TYPE PITURE ODE DESRIPTION ONSUMPTION BS Optical smoke detector BS Smoke and heat detector BS Heat of rise detector with base BS661 D Heat of rise detector, IP 65 18V30V D 50μA 50μA 50μA 28mA with LED 18mA without AESSORY TYPE PITURE ODE DESRIPTION BASE6024** Base with relay 24V for BS655 etc. Packaging contains: 54 pcs. Paper box dimentions (LxWxH): 430x280x335mm SIRENS AND SIRENS WITH BEAONS FOR FIRE ALARM PANELS TYPE PITURE ODE DESRIPTION OPERATION VOLTAGE BS530/1 H Siren, 88dB, IP V D BS531 G BS530/1/WP H BS531/1 H BS531/1/WP H Siren, 88dB, IP 42 Waterproof IP65 siren, 88dB Siren with beacon, IP42 Waterproof IP65 siren Packaging contains: 16pcs. Paper box dimentions (LxWxH): 430x280x V D 2128V D 2128V D 2128V D ONSUMPTION 40mA 40mA 40mA 40mA 40mA 300 gr. 310 gr. 300 gr. 300 gr. 310 gr. AUTONOMOUS FIRE DETETION DEVIE * TYPE PITURE ODE DESRIPTION OPERATION VOLTAGE ONSUMPTION GS506 Β Autonomous optical smoke detector with 9V battery WALL SOUNDER & VISUAL ALARM AORDING TO ΕΝ 5423 * OPERATION TYPE PITURE ODE DESRIPTION VOLTAGE ONSUMPTION *WS 100AV Ι Wall sounder & visual alarm device 24V, 100dB WATERPROOFING BOX FOR FIRE ALARM SENSOR BASE TYPE PITURE ODE DESRIPTION OPERATION VOLTAGE ONSUMPTION BASE196* J Waterproofing box for fire alarm sensor base AESSORIES TYPE ODE DESRIPTION Recess wall mounting base Protective diffuser for BS536 * Trade product 85

87 Beam smoke detectors IP20 Description > BS230, BS232, BS240, BS242. New remoteadjusted beam detectors 850m and 8100m > Up to 4 detections devices per control unit > Alignment and focus of the detection heads from the control unit (manual or automatic) > The BS230, BS240 are state of the art in the field of beam detectors. They consist of the controller, the detector and the mirror (1 or 4). The controller can manage up to 4 detectors thus making the installation more economical > The detectors (detection heads) have a motor for the movement on the horizontal and vertical axis and a laser transceiver. With these parts they can be adjusted manually or automatically from a distance during the installation phase. > In case of a fire, the smoke absorbs part of the I.R emission. When the quantity of the IR beam drops below a predetermined level for more than 8 to 10 seconds the detector issues an alarm signal > BS meter beam smoke detector. onsists of 2 pieces. One piece contains an IR transmitter, receiver and a connectioncontrol unit. The second piece is a special mirror which is mounted directly opposite from the main detector. 86

88 BEAM SMOKE DETETORS REMOTEADJUSTED BEAM DETETORS * TYPE PITURE ODE DESRIPTION ONSUMPTION BS230 BS232 BS240 BS m beam detector with controller, detection head and 1 mirror Detection head and 1 mirror 100m beam detector with controller, detection head and 1 mirror Detection head and 4 mirrors 10mA 2mA 10mA 2mA SENSIBILITY 25, 35, 50% Obscuration 25, 35, 50% Obscuration 25, 35, 50% Obscuration 25, 35, 50% Obscuration BEAM SMOKE DETETORS * TYPE PITURE ODE DESRIPTION ONSUMPTION BS211 BS250 Β Β m Beam smoke detector (with mirror) 5 50m Beam smoke detector (with mirror) 8,5mA 8,5mA SENSIBILITY 25, 35, 50% Obscuration 25, 35, 50% Obscuration IR BEAM SMOKE DETETORS * TYPE PITURE ODE DESRIPTION ONSUMPTION FIRERAY m Beam smoke detector 13mA SENSIBILITY 25, 35, 50% Obscuration * Trade product 87

89 Address Fire Analog Addressable Fire Detection System 1010a IP30 D Μodern addressable fire alarm panel with 32, 64 or 96 zones Suitable for large installation such as malls, hotels, factories. 2 or 4 loops (150 points per loop). > Produced in accordance with EN542, EN544. > 32, 64 or 96 zone capability. > V A mains power supply. > It offers 2 or 4 fully monitored siren outputs with a rating of 24V / 0,5A and 6 programmable relays as well as a built in network circuit. > Incorporated power supply with a rating of 24V/100W and builtin battery charger for 24V batteries with a capacity of upto 12Ah. > The panels offer an extensive list of adjustments and characteristics for the control of the installed devices and sirens. These parameters can easily be adjusted using a P based program. > The programming of the panel can also be done using a P. > Messages can be viewed on the big LD (320x240 pixels) whereas LEDs are used to show basic operations such as alarms, faults and isolated sections > The operation is done using the builtin 16 key keypad. > There is also an incorporated safety lock and a thermal printer mounting position > The maximum delay for the sirens is 4 minutes. 88 EXPANSION UNITS > apabilities of connecting unit per panel, thus configuring panels with upto 8 loops. > Each expansion unit contains 2 or 4 loops with 150 points per loop. > 2 or 4 siren outputs. > Incorporated battery charger for 24V batteries with a capacity of upto 12Ah. > V A/5060Hz mains power supply.

90 ANALOG ADDRESSABLE FIRE DETETION SYSTEM ANALOG ADDRESSABLE FIRE DETETION ONTROL PANELS 1 TO 8 LOOP 1010a TYPE PITURE ODE BSR2104 BSR2114 A A DESRIPTION Addressable fire detection panel 2 loops/ 96 zones Addressable fire detection panel 4 loops/ 96 zones TEHNIAL SPEIFIATIONS FOR ANALOG ADDRESSABLE FIRE DETETION ONTROL PANELS 1 TO 8 LOOP TYPE ODE DESRIPTION OPERATION VOLTAGE ONSUMPTION BATTERY HARGING IRUIT LOOP IRUIT SIRENS IRUITS V OUT S RELAY4, RELAY5, RELAY6 RELAY1, RELAY2, RELAY3 FAULT ALARM A1, A2 & 3 INPUTS MAX. URRENT LOAD ONNETION ABLES DEGR. OF OVER PROT. OPER. TEMPERATURE RELATIVE HUMIDITY ONSTR. MATERIAL DIMENSIONS PROD. AORD. WITH BSR2104 BSR Addressable fire detection panel 2 loops/ 96 zones V A/5060Hz 100 VA 2x12V/7Ah to 2x12V/12Ah μολύβδου Stabilized power supply 27.6V / 600mA Addressable fire detection panel 4 loops/ 96 zones 24V/200mA(quiscent). Each loop can accept upto 150 points. Each loop is protected by a selfresettable fuse. The total number of points that can be installed on one panel is 512 according to ΕΝ542 paragraph circuits 24V/500mA, monitored for opens and short circuits. Each output is protected by a selfresettable fuse. 24VD (+ 3VD) continious outputs with a max. current of 0,5. Each output is protected by a selfresettable fuse. General purpose Relay (250VA 5A). Relay outputs monitored for open and short circuits. Each output is protected by a selfresettable fuse. Open collector output (maximum rating 30VD/6mA) Open collector output (maximum rating 30VD/6mA) 3 General purpose inputs (maximum input voltage 30VD) The maximum current drawn by the loops, sirens, outputs VOUT and relays must not exceed 2. The connection cables must be approved for fire detection installation such as FIP200, MI, PYROFIL. The cables use for data transfers must be of the twisted pair types and must be insulated 7 Kgr (2 loops ) IP 30 o 0 up to 40 Up to 95% Electrostatically painted steel 480 x 410 x 154 mm EN 542, EN Kgr (4 loops) ADDRESSABLE FIRE DETETION PERIPHERAL DEVIES FOR PANELS BSR21xx TYPE PITURE ODE DESRIPTION BSR2142 BSR2000 Β Thermal printer for BSR2xxx Repeat panel for BSR2xxx A2100 ** Software for BSR21xx & USB cable BOX2100/WP * D Waterproof metal box for BSR2xxx panels ** Download for free the A2100 software for BSR21xx panel at * Trade product 89

91 Address Fire Fire Detection management software > an use all standard graphic formats(bmp, jpg, e.t.c.) > Easy and fast programming of the main application (without the need to write special scripts). > Flexible lient/server architecture (using the widespread TP/IP socket), > Wide variety of event and history logs, > Use of standardized data bases. > Multi event screens, calculations with spreadsheets, filters > Open logic code that permits access to its libraries via other windows based programs (including VB and java script). > Web operation capability with no workstation restrictions. > HotStandby optional capability operation with the use of 2 computers, > NO RESTRITION TO THE NUMBER OF PANELS! Exhibitions, e.t.c. MI SUITE INSTALLATION EXAMPLE TYPIAL ONNETION OF A BSR21XX PANEL TO A BMS M& I REMOTE ETHERNET Modbus IP OP lient BAnet IP M& I SUITE M& I VIEWERS BSR21XX > The M&I Suite is a powerful graphical environment that can simultaneously communicate with open or private networks. > Τhe M&I Suite permits the management and the control of the fire detection equipment from one computer and offers great capabilities. > The M&I Suite permits a bidirectional communication of the fire detection equipment with other equipment via certified protocols (BAnet, Modbus, OP). > The BMS1001 is a powerful multiprotocol converter and communications processor which is used for the communication between of one or more fire detections installations and one or more terminals of other applications. > The BMS1001 can translate data from all supported protocols. > Supports all certified industrial protocols. (BAnet, Modbus, OP) > Without restrictions as too the number of work stations! 90

92 ANALOG ADDRESSABLE FIRE DETETION SYSTEMS SOFTWARE FOR ONNETING FIRE DETETION PANELS TO B.M.S. TYPE ODE DESRIPTION BMS Basic software for connection BSR2xxx with Gateway BMS Software for connection BSR21xx with BAnet protocol BMS Software for connection BSR21xx with Modbus protocol BMS Software for connection BSR21xx with OP protocol > Τhe BMS series consists of the required programs for the system to function via a building management system (B.M.S). > The BMS1001 is a basic translation software that permits the communication between the panels and a computer. > Depending on the requirements, one or more protocols must be added to communicate with the respective devices. onnecting a panel with a BMS485 using a shielded cable 2x1mm² Distance between panel and unit upto 400 meters onnect the BMS485 to a free USB port on the computer BSR21xx panel or the master panel in a network of panels omputer that runs the BMS1001 software GRAPHIAL ENVIRONMENT SOFTWARE FOR FIRE DETETION SYSTEM MANAGEMENT TYPE ODE DESRIPTION MI1001 MI1202 MI1203 MI1204 BMS Visual software monitor BSR21xx Modbus protocol for MI1001 OP protocol for MI1001 BAnet protocol for MI1001 Device for connection BSR21xx with a P > The MI contains programs for the autonomous operation of the system and can support individual panels or panels in a network. > The MI1001 is the basic software which can be used to manage the fire detection system. It runs in a Windows environment on any personal computer. > To the basic software you can add any of the protocol packages thus giving the capability to the system to exchange data with other systems that use one of the protocols.the MI contains programs for the autonomous operation of the system and can support individual panels or panels in a network. onnecting a panel with a BMS485 using a shielded cable 2x1mm² Distance between panel and unit upto 400 meters BSR21xx panel or the master panel in a network of panels onnecting the BMS485 to a free USB port on the computer omputer that runs the MI1001 software 91

93 Address Fire Peripheral Devices for Addressable Fire Detection Panels D IP20 IP20 K F IP65 Ε Ι IP20 G IP20 H J L IP20 IP42 Description > BSR6055/A. Addressable optical smoke sensor. It has > BSR8019/. Addressable input unit with auxiliary an internal «smart» chamber with a special transmitter relay. It is used for connected gas detectors (e.g. BSand receiver. The sensor continuously sends digital 685 and BS686) on the loop. It has an input which is information to the panel regarding quantity of the monitored for open and short circuit conditions and a smoke. The panel, using special algorithms, decides relay (1A/30V) activated after a panel reset. when to issue the alarm. The sensor has a special > BSR7070/. Line isolator. It is placed between other connection base and microswitches that are used to addressable units and isolates any short circuits that set the address. might happen on the loop cables. Upto 32 such > BSR6057/. Addressable optical smoke / heat of rise devices can be connected on the loop. detector. (The same base as BSR6055/A) > ΒSR6060/. Addressable heat of rise sensor. It has a special temperature sensor that gives an output depending on the temperature of the monitored area. The builtin microprocessor calculates the rise rate of the temperature and sends the digital information to the panel. The sensor has a special connection base and microswitches that are used to set the address. 92

94 PERIPHERAL DEVIES FOR ADDRESSABLE FIRE DETETION PANELS PERIPHERAL DEVIES for fire detection panels BSR2104 & BSR2114 TYPE PITURE ODE DESRIPTION OPERATION VOLTAGE ONSUMPTION BSR8017 D Addressable I/O unit 1428V D 1mA BSR8019/A D Addressable unit input with relay 1428V D 1mA BSR8020 D Addressable unit input with relay 2128V D 0,7mA BSR8020/WP A Addressable unit input with relay (IP65) 2128V D 0,7mA 485* H Signal amplifier for RS gr. 165 gr. 165 gr. 230 gr. SIREN WITH BEAON for fire detection panels BSR2104 & BSR2114 TYPE PITURE ODE DESRIPTION BSR5032 J Siren, 88dB, IP 42 OPERATION VOLTAGE ONSUMPTION 1430V D 20mA 300 gr. Packaging contains: 16 pcs. Paper box dimensions (LxWxH): 430x280x335mm FIRE DETETION ALL POINT TYPE PITURE ODE BSR5036/A B BSR5036/A/WP DESRIPTION Fire detection call point Waterproof IP64, fire detection call point Packaging contains: 54 pcs. Paper box dimensions (LxWxH): 430x280x335mm OPERATION VOLTAGE 1428V D 1428V D ONSUMPTION 1mA 1mA 225 gr. 225 gr. PERIPHERAL DEVIES TYPE PITURE ODE BSR6055/A BSR6057/A BSR6060/A Ε Ε Ε BSR5072 G BSR2143 K BSR7070/A Ι BSR7071/A F DESRIPTION Optical smoke detector Optical smoke/heat of rise detector Heat of rise detector Remote detector LED Programming & testing unit Line isolator Line isolator with base OPERATION VOLTAGE 1428V D 1428V D 1428V D ONSUMPTION 1mA 1mA 1mA 1428V D 1mA 2x9V Battery 60mA 1430V D 1,2mA 1430V D 400μA 200 gr. 190 gr. 180 gr. 70 gr. 600 gr. 80 gr. Packaging contains: 54 pcs. (BSR6055/A, BSR6057/A, BSR6060/A, BSR6024/SB) Paper box (LxWxH): 430x280x335mm (BSR6055/A, BSR6057/A, BSR6060/A, BSR6024/SB) WATERPROOFING BOX FOR FIRE ALARM SENSOR BASE TYPE PITURE ODE DESRIPTION OPERATION VOLTAGE ONSUMPTION BASE196* J Waterproofing box for fire alarm sensor base * Trade product 93

95 Fire detection peripheral devices IP65 IP42 Description > BS510/24. An electromagnetic door latch with a latching capability of 50 Kg. It is used in cooperation with fire safety doors, in order to prevent the expansion of the fire when required. The package contains the electromagnet that is placed on the wall and is powered, and the magnet placed on the door along with all the required mounting accessories. The magnet can either be permanently or swivel mounted. > BS Vdc, 6bar, ½" manually reset electrovalve. > BS Vac, 6bar, ½" manually reset electrovalve > BS Vdc, 6bar, ½" manually reset electrovalve. > The electrovalves are placed in the exterior of the protected area, and with the arrow engraved on the body, towards the direction of the gas. 94

96 FIRE DETETION PERIPHERAL DEVIES FIRE DETETION DEVIES FOR SPEIAL USE* TYPE PITURE ODE DESRIPTION VOLTAGE ONSUMPTION BS510/24* Electromagnetic door latch (24V) 24V D 80mA 430 gr. FIRE DETETION DEVIES FOR SPEIAL USE* TYPE PITURE ODE DESRIPTION VOLTAGE ONSUMPTION BS680* BS682* BS684* Electrovalve 24VD Electrovalve 230VA Electrovalve 12VD 24V D 230V A 12V D 4VA 4VA 6VA 610 gr. 610 gr. 610 gr. Packaging contains: 20 pcs. AESSORIES FOR SMOKE, HEAT & GAS DETETORS TYPE PITURE ODE DESRIPTION BOX3016* Β Base for installing detectors in airducts A752* Spray for testing smoke detectors (150ml) RSTESTKIT* Smoke capsule for TESTKIT AESSORIES FOR TESTING SMOKE & HEAT DETETORS* TYPE ODE DESRIPTION TESTKIT Accessories set for testing smoke & heat detectors TESTKIT TESTKIT TESTKIT * Trade products 95

97

98 GAS DETETION GAS DETETION SYSTEMS

99 GAS DETETION GENERAL GUIDES The more and more extensive gas use (liquid gas or natural gas) for domestic purposes as well as the industrial use of flammable or toxic gases demand the detection of possible leaks. In this short guide, we will describe the behaviour and basic characteristics of the main gases so that someone can design a proper installation to detect them. Gas properties In the science of physics, gases are substances with no particular volume and without a defined shape. Gases are one of the three states of matter. The particles (atoms, molecules, ions) that compose gases are thinly distributed in space in relation to those of the liquids, let alone those of the solids. The tractive forces between them are too weak to hold them in fixed positions and as a result they move towards all directions. This is the reason gases have no defined shape and volume but tend to cover all the available space. Explosive gases When the gas we want to detect is explosive, the main characteristic we are interested in is the Lower Explosion Limit (L.E.L). It is the concentration of the gas in the gas air mixture above which the mixture becomes flammableexplosive. If the gas reaches and overcomes this limit, any flame, spark, electrostatic discharge or even thermal body can cause ignitionexplosion. Each gas has a different L.E.L. The following chart shows the most usual explosive gases and their Lower Explosion Limit. Molecular weight or relative molecular mass is the mass of a molecule compared to the mass of the atom of the isotope anthrax 12 (12), and in particular the number that shows how many times bigger than 1/12 of the mass of 12 the molecule mass is. To find the molecular weight, we add the atomic weights of the atoms that take part in the chemical formula of a compound or element. For example, the chemical formula of methane is H4. The molecular weight of anthrax is 12 and hydrogen 1, therefore the molecular weight of methane is 12+(1x4)=16. The molecular weight of air (which is a mixture of different gases in specific contents) is considered to be 29. A chart follows with different gases and their molecular weight. The quantity of gas in the air is measured in percentage per volume and the unit percent (%vol) is used for big concentrations or the parts per million (ppm) for small concentrations. Gas categories We separate the gases we are usually called to detect in two general categories, explosive and toxic. Explosive gases are the gases that, beyond a certain concentration point, create an explosive mixture with air. Toxic gases are the gases that, when leaked, can cause damage to living organisms. Generally, toxic gases are more dangerous and must be detected in much smaller concentrations than explosive gases. For security reasons, as proposed in EN 50194, the gas must be detected in the part between 3% and 20% of the L.E.L (the usual figure is 10%).20% του L.E.L. We need molecular weight to see if the gas is lighter or heavier than air. Generally, lighter gases (molecular weight less than 29) tend to concentrate high, while heavier gases (molecular weight more than 29) tend to concentrate low, meaning of course the initial concentration, because with the passing of a certain amount of time, all leaking gases end up with uniform density throughout the available space. hemical type and molecular weight of gases Name Butane Propane Methane Hydrogen arbon monoxide Benzol Ethyl alcohol Ammonia Hydrocloride arbon dioxide hloride dioxide Sulphur dioxide Hydro sulphor hemical type 4 H 10 3 H 8 H 4 H 2 Ο 6 H 6 2H5ΟΗ ΝH 3 HL O 2 LO 2 SO 2 H 2 S Molecular weight Low limit of explosiveness of gases Name Butane Propane Methane Hydrogen Ethylene Benzol Ethyl alcohol hemical type 4 H 10 3 H 8 H 4 H 2 2 H 4 6 H 6 2H5ΟΗ L.E.L For safety reasons, as suggested by EN50194 the detection of gas must be done in the range from 3% to 20% of the L.E.L (the most common value is 10% of the L.E.L) 98

100 GENERAL GUIDES Toxic gases When the gas we want to detect is toxic, we need to take into account various parameters that have to do with the toxicity and hazard of the gases to be detected. These have to do with the gas itself as well as with the period of time people can be exposed to it (depending on the use of space and the permanent or occasional presence of people there). The main characteristics of toxic gases are: T.W.A. It is the maximum average gas content during eight hours (48 hours per week). S.T.E.L. It is the maximum gas content in the air a person can be exposed to for a small period of time (maximum 15 minutes) without serious and permanent health damage. The two notions above are expressed in ppm or mg/l (micrograms per air litre) or mg/m3 (micrograms per cubic air metre). The chart below shows the main toxic gases and the T.W.A and S.T.E.L numbers for each. Toxic Gases Name arbon monoxide arbon dioxide Ammonia Hydro sulphur Sulphur dioxide hloride dioxide Hydrocyanic Hydrocloride Monoxide of nitrogen Dioxide of nitrogen hemical formula Ο O 2 ΝH 3 H 2 s SO 2 LO 2 HN HL ΝΟ ΝO 2 T.W.A Apart from these general limits, each toxic gas causes different sideeffects to the human organism, which always depend on its concentration and the time of exposure to it. Next, we are going to examine the sideeffects of carbon monoxide, a toxic gas that can be emitted in places where most people can find themselves. arbon Monoxide (O) is created when the combustion is imperfect. It is a very dangerous gas as it is invisible and odourless, therefore, undetectable through the physical senses of the human organism. It is nearly as light as air, with almost the same density (0.97), so it spreads in space homogeneously. O belongs to the category of chemical gases that cause asphyxia. When O is inhaled, it is absorbed by blood and progressively reduces the ability of blood to transfer oxygen to the tissues. A prolonged stay in a polluted environment with high concentrations can be fatal S.T.E.L More specifically, some of its sideeffects in conjunction with the time of exposure are: 50ppm concentration for 8 hours: Maximum allowable limit of exposure, no serious sideeffect. 200ppm concentration for ours: Feeling of mild sickness accompanied with a light headache. 600ppm concentration for 1 hour: Severe headache. 1500ppm concentration for 1 hour: Severe headache, feeling of nausea, discomfort. 2000ppm concentration for more than 30 minutes: Severe headache, feeling of nausea, discomfort, loss of balance. 2500ppm concentration for more than 30 minutes: Loss of the senses. 4000ppm concentration for more than an hour: Death. nthrax monoxide detection systems are enforced by order in many European countries, in medium and big size underground parking spaces (over 350 square metres) intended for public use. DETETOR TYPES We divide detectors into categories depending on the type of their output, the type of the sensor and the environment where they were intended to work. Autonomous detectors and those that work with conventional fire detection panels have a relay contact as output, which is activated in a preset gas concentration. Those used in industrial installations have analogue output (420mA) and only work with special panels that have equivalent inputs. The types of sensors used by gas detectors are: atalytic This type of sensor is mainly used to detect explosive gases (in concentrations measured in L.E.L.). Their life span is usually 5 years. They gradually lose in sensitivity (with a rate of about 5% per year) and this is why they need periodic recalibration 1 to 2 times per year. Electrochemical This type of sensors is usually used to detect toxic gases in small concentrations (concentrations measured in ppm). Their life span is 2 to 3 years. Their sensitivity is affected by humidity and low temperature and this is the reason they need periodic recalibration 1 to 2 times per year. Infrared This type of sensors is usually used to detect gases other detectors cannot detect (carbon dioxide). They are more expensive but have many advantages compared to the other two types. The main ones are: They are not affected by humidity and environmental temperature. They can be used to measure a very small or big concentration of the same gas. Their sensitivity is not affected if they are suddenly found in a very big concentration of the gas. They cannot be 'poisoned' by gases that cause permanent damage to the other two types. They can be used to measure more than one gas at the same time. 99

101 Analog Gas Detection systems IP30 D F Ε General characteristics > BS380, BS381, BS382, BS383. Gas detectors which are suitable for laboratories, industries, car parking stations e.t.c. They have a 420m analog output and are suitable for panels and peripherals (pg. 55). These gas detectors are mounted in a vertical position with the detection nozzle pointing downwards. If the detected gas is considered light (its molecular weight is smaller that 29) then the detectors are place above the probable leakage points. If the detected gas is considered heavy (its molecular weight is above 29) then the detectors are placed below the probable leakage points. > BS390, BS391, BS393. The antiexplosive type gas detectors are detectors that are suitable for hazardous environments. They are certified for environments: II 2G Eex d II T6. They have a 420m analog output and are suitable for panels and peripherals (pg. 55). > These gas detectors are mounted in a vertical position with the detection nozzle pointing downwards. If the detected gas is considered light (its molecular weight is smaller that 29) then the detectors are placed above the probable leakage points. If the detected gas is considered heavy (its molecular weight is above 29) then the detectors are placed below the probable leakage points The connection with the panel is done using 3 cables. A shielded cable with a rating of 3 x 1.5mm2 is required for a distance upto 300 meters and 3 x 2.5mm2 for distances upto meters. > BS316. Expandable gas detection panel with a microprocessor, 16 inputs for connection with gas detectors 420 ma, programmable outputs (opened relay contacts). ooperates with detectors 420 ma that are connected with 2 or 3 cables to the panel. Dimensions in mm BS304, BS308, BS312, BS316 BS390 BS

102 ANALOG GAS DETETION ANALOG GAS DETETION PANELS TYPE PITURE ODE DESRIPTION BS304 BS308 BS312 BS inputs 420mA 8 inputs 420mA 12 inputs 420mA 16 inputs 420mA TEHNIAL SPEIFIATIONS FOR ANALOG GAS DETETION PANELS TYPE ODE DESRIPTION OPERATION VOLTAGE WATTAGE BATTERY S OPERATION TEMPERATURE PROD. IN AORDANE WITH BS304 BS308 BS312 BS inputs 4 inputs 12 inputs 16 inputs 420mA 420mA 420mA 420mA V A / 5060Hz 60VA 12V7Ah Pb o gr. ΕΝ 50057, ΕΝ 60335, ΕΝ , ΕΝ EXPANSION UNIT TYPE ODE DESRIPTION Expansion card for BS304,BS308,BS312 panels WATERPROOF IP65 ANALOG GAS DETETORS 420mA* TYPE PITURE ODE DESRIPTION VOLTAGE BS380 BS381 BS382 BS383 Β Β Β Β LPG gas detector Natural gas detector arbon monoxide detector Ammonia detector 1224V D 1224V D 1224V D 1224V D SENSOR TYPE atalytic atalytic Electrochemical Electrochemical ANALOG, ANTI EXPLOSIVE TYPE GAS SENSORS 420mA* TYPE PITURE ODE DESRIPTION VOLTAGE BS LPG gas sensor 1224V D BS Natural gas sensor 1224V D BS Ammonia sensor 1224V D T100N/LPG D Exd Analogue Gas Detector T100N/NG D Exd Analogue Natural Gas Detector TS293PX Anti explosive gas sensor for various gases TS293PXH Anti explosive gas sensor for various gases TS293EO Anti explosive oxygen gas sensor TS293ES Anti explosive sulfur dioxide gas sensor TS293KI Anti explosive hydrogen gas sensor SENSOR TYPE atalytic atalytic Electrochemical atalytic atalytic atalytic atalytic Electrochemical Electrochemical atalytic * (Hexane, ethyl acetone, ethyl alcohol, xylene, toluene, sulfur dioxide, acetylene, methanol). * Trade products PERIPHERAL DEVIES TYPE PITURE ODE DESRIPTION VOLTAGE ONSUMPTION BS527 BS527/WP Ε F Indication slave luminaire with buzzer Waterproof IP 65 indic. slave luminaire with buzzer 1224V D 1224V D 85mA 85mA 101

103 Autonomous gas detection devices D IP40 IP40 IP40 IP20 Ε F G H IP20 IP42 Description > BS690. Autonomous LPG detector with fire detection zone. It is activated when the gas contents in the monitored area exceed 515% of the L.E.L. (Lower Explosive Level) onventional fire detection sensors, remote gas sensors and different kinds of electrovalves, can be installed on the special input. It has a builtin sounder, a 5A/230V relay and a good operation test button. > BS691. Autonomous natural gas detector with fire detection zone. This detector has the same characteristics as the BS690 but is suitable for sensing natural gas leaks or alcohol vapors. > BS687. Waterproof autonomous LPG detector (IP 42). It is activated when the gas (propane, butane) concentration level reach 515% of the L.E.L. (Lower explosive level. It has a 220V/5A relay and can monitor an area of 2530 sq.m. > BS688. Waterproof autonomous natural gas detector (IP 42). It has the same characteristics as the BS687 but is suitable for detecting natural gas and alcohol vapors. > BS673. Autonomous natural gas detector with battery backup. This detector has a suitable output capable of driving an electrovalve. The builtin battery enables the electrovalve activation even when the mains power supply fails. It can monitor an area of 2530 sq.m. > BS674. Autonomous LPG detector with battery backup. It has the same characteristics as the BS673 but is suitable for detecting propanebutane gases. > BS685. Waterproof (IP 65) LPG detector with relay. It is activated when the gas content (propane or butane) in the monitored area exceeds 515% of the lower explosive level (L.E.L). The incorporated LED lights when the detector is activated. The command towards that panel is given with a voltage free relay contact. > BS686. Waterproof (IP 65) natural gas detector with relay. It is activated when the methane or alcohol content in the monitored area exceeds 515% of the lower explosive level (L.E.L) The incorporated LED lights when the detector is activated. The command towards that panel is given with a voltage free relay contact. > BS658. With a highquality electrochemical gas sensor and excellent craft work, it has the advantages of good repeatability, Resistant against temperature and humidity, long lifespan and easy operation. It can convert the gas concentration in the air to a digital signal output with a range of 420mA. It is suitable for gas detection in car parkings or industrial environment where toxic gas leaks. 102

104 AUTONOMOUS GAS DETETION DEVIES AUTONOMOUS GAS DETETION DEVIES (230V) TYPE PITURE ODE DESRIPTION VOLTAGE ONSUMPTION BS690 BS691 BS692 BS693 BS694 BS695 BS696 BS697 D D Ε Ε D D LPG detector with beacon & fire detection zone with output relay Natural gas detector with beacon & fire detection zone External LPG sensor for connecting with BS690, BS691 External natural gas sensor for connecting with BS690, BS691 LPG detector with output relay Natural gas detector with output relay LPG detector with beacon & output for electrovalve 12V / 19W NO Natural gas detector with beacon & output for electrovalve 12V / 19W NO V A V A 5V D 5V D V A V A 230VA / 24VD 230VA / 24VD Packaging contains: 54 pcs. (BS692 & ΒS pcs.) Paper box dimensons (LxWxH): 430x280x335mm 32VA 32VA 0,5W 0,5W 4VA 4VA 4VA 4VA AUTONOMOUS GAS DETETION DEVIES (230V) TYPE PITURE ODE DESRIPTION VOLTAGE ONSUMPTION BS687 BS688 Β Β Autonomous LPG detector with relay & buzzer, IP42 Autonomous natural gas detector with relay & buzzer, IP42 BS673 BS Autonomous natural gas detector with battery for 12V electrovalve Autonomous LPG detector with battery BS6721* F Autonomous carbon monoxide detector with relay 230V V A V A V A V A V A Packaging contains: 54 pcs. (BS687, BS688), 24 pcs. (BS673, BS674) Paper box dimensions (LxWxH): 430x280x335mm 3VA 3VA 3VA 3VA 5VA WATERPROOF GAS DETETION DEVIES (IP65) 1030V D TYPE PITURE ODE DESRIPTION ONSUMPTION BS685 H LPG detector with relay, 10V30D, IP 65 BS686 H Natural gas detector with relay, 10V30D, IP 65 BS658* G arbon monoxide detector (IP 66) * Trade product 0,5W 0,5W 2W/channel Dimensions in mm BS690, BS691, BS696, BS697 BS692, BS693 BS6721 BS687, BS688 BS673, BS * Trade product 103

105 Exports Exports to SAFE HOME FROM DISTANE! Burglar alarm system BS458 Panel Siren Keypad ΝΕW colour anthracite Easy installation Programming through P Smart home capability, lighting control, heating etc. onnecting to GSM autonomatic dialer Android & ios application* iolympia application for

106 BURGLAR ALARM SYSTEMS BURGLAR ALARM SYSTEMS

107 BURGLAR ALARM SYSTEMS GENERAL GUIDES IN GENERAL A burglar alarm system is a group of accessories and its purpose is to protect a specific area from intrusion. It consists of the central control panel, the operating controls, the external siren and the alarm sensors. In some cases, it can include an internal siren or devices to notify people via telephone (e.g. answering machine). The burglar alarm systems for personal use (houses, small shops) can include fire detection or flood detection using special detectors connected to independent zones. Diagram of correct placement of IR detectors in a building ENTRAL PANEL It is the 'heart' of the system. All the sensors send the signal to it and all alarm orders start from it. It supplies all the devices with 12 VD voltage and has got rechargeable battery so that it works in case of power failure. OPERATING ONTROLS Small sized panels (e.g. BS468) usually have an operating control through which the programming and operating of the system is done. Medium or big sized panels require external operating controls for their programming and function. Up to 4 operating controls can be connected to each panel and 4 cables are required for their connection. Panel BS468 can also work with a wireless operating control (RF). In this case, a plate (RF receiver) is placed in a special socket in the panel and one or more RF transmitters operate it. ALARM SENSORS Magnetic contact. It is consists of a contact that works with the help of a magnet. In particular, the contact is closed when it is close to the magnet and it is open when it is away from it. It can be placed on doors, windows or shutters and protect them from opening. Depending on the type of frames, external placement or builtin placement magnetic contacts can be used. There are also robust type magnetic contacts, suitable for use in industrial shutters. Their connection to the panel requires 2 cables for the alarm order. Infrared movement detector (PIR). It detects a moving source of infrared radiation (heat). It is considered to be the more suitable sensor for internal spaces and it is what is mostly used. If placed correctly, they can fully cover all the internal spaces. They are either surface mounted placement or suitable for roof placement. 6 cables, 2 for supply with 12 VD voltages, 2 for the alarm order and 2 for the auto protection switch (TAMPER) are required for connecting to the panel. There is a movement detector placement example in the following chart. Infrared movement detector and microwave detector (PIR+MW). It combines the infrared detector circuits with very low power microwave transmitter and receiver. It is Wall mounted IR detector programmed by the user to work in two states. With OR logic (any one of the two technologies detects movement, there is an alarm) it can cover spaces that require high security. With AND logic (there is an alarm when both technologies detect movement at the same time) it can cover spaces that regularly produce false alarms, if we are using a simple infrared detector. 6 cables are required for connecting to the panel, like with common infrared detectors. Breaking detector. It is an audio frequency selective detector with adjustable sensitivity, suitable for detecting the sound of breaking windows. The frequency above which it detects is adjusted from 2 up to 10 KHz. It is placed near the areas it protects and with direction towards the window surfaces. In order to have good acoustics, there must be no objects between the detector and the surface it protects. 6 cables are required for connecting to the panel, 2 for its supply with 12VD voltage, 2 for the alarm order and 2 for the auto protection switch (TAMPER). Infrared beam detector. It consists of two accessories, a transmitter of two or more infrared beams and an equivalent receiver. It is usually used in external spaces for perimetric covering. The transmitter's beams focus on the receiver and if one or more beams (depending on the adjustment) are interrupted, an alarm signal is produced. 106

108 GENERAL GUIDES There are several models depending on the maximum EXTERNAL SIREN distance between transmitterreceiver. The following are It is placed high in order to be visible from far away and required for connecting to the panel: on a spot difficult to access. It has got a powerful 6 cables for the transmitters, 2 to supply it with 12 VD loudspeaker (at least 120DB) and a powerful light to be voltage, 2 for the alarm order and 2 for the autoprotection visible during the day, too. It works with incorporated, switch (TAMPER). rechargeable battery voltage. Fire detectors. One of the panel's zones can be used to detect fire. Special smoke and heat detectors (like the fire detectors but in 12 VD version) can be connected to this zone. 2 cables are required for the detectors' connection to the panel, which has got a specially programmable zone. 4 cables are required for bigger panels and every detector must be accompanied with a special base BASE6012. Infrared movement detector and microwave detector (PIR+MW) for open space use. Special detector in which microwaves function with a dooppler system and which produces alarm signal only when both technologies detect movement, thus, securing remarkable reliability. Its cover is sealed (IP65). 6 cables are required to connect it, like with common infrared detectors. Panic button. It includes a simple contact. When pressed, it sends an alarm signal to the panel. It can be placed in different places (under the desk, over the bed, near the entrance) depending on the use of the system. It internally contains auto protection switch. 4 cables are required to connect it, 2 for the alarm order and 2 for the auto protection switch (TAMPER). The panel charges and sustains its battery. It has got a double covering (to protect it from urethane foam) and an auto protection switch. 5 cables are required for connecting it, 2 for its supply with 13.8VD voltage, 1 for the alarm order and 2 for the auto protection switch (TAMPER). INTERNAL SIREN It is placed inside the covered space in order to notify the occupants of the intrusion. It cannot replace the external siren and it is always used as its supplement. 2 cables for its supply with voltage are required for connecting it. ANSWERING MAHINE In case of alarm, it receives an activating order from the panel, calls the programmable telephone numbers and transmits a message recorded by the user. There are devices that work via wired telephone network and others that use the mobile telephone networks. TYPIAL ONNETION OF BS468/KEYPAD PANEL 230 VA BS468/KEYPAD PANEL BS466 keypad Up to 8 keypads BS413 siren with beacon Æ1 Æ3 Æ5 Æ6 Siren for interior use BS441 Æ2 Æ4 BS405 BS655/12 +Base6012 Magnetic trap BS429 BS405 BS360 BS409 BS

109 BURGLAR ALARM SYSTEM IP20 Description > Easy installation > Programming through P > Smart home capability, lighting control, heating etc. > onnecting to GSM autonomatic dialer > Android & ios application iolympia application General characteristics > The BS458 is a 4 zone burglar alarm panel. > apability to connect an automatic telephone dialer > The programming can be done using the keyboard or via a GSM for remote control and operation. USB connection to a P using special software. > «Smart Home» capability. Lighting control, heating e.t.c. > There is also an expansion port used for automatic > 250 event logging capability. telephone dialers. > 20 different users. > 4 zones where we can connect 5 motion detectors per > 3 separate areas A, B,. Each area operates zone and infinite magnetic traps(bs429/x). independently. Instant one key arming. > Also, 3 freely programmable outputs and 1 relay output. > Primeter arming and full arming functions. > 1 output for connecting an autonomous external siren such as the BS413. > 1 output for connecting to a simple siren such as BS

110 BURGLAR ALARM SYSTEMS 4 ZONE BURGLAR ALARM PANEL WITH SIREN AND EMBEDDED KEYPAD TYPE PITURE ODE DESRIPTION BS458 BS458/GSM A Burglar alarm panel with embedded BS466 keypad Burglar alarm panel with embedded BS466 keypad & GSM card TEHNIAL SPEIFIATIONS 4 ZONE BURGLAR ALARM PANEL WITH SIREN AND EMBEDDED KEYPAD TYPE ODE DESRIPTION OPERATION VOLTAGE ONSUMPTION BATTERY HARGING IRUIT SIREN IRUIT AS S P1, P2 12V ZONES MAXIMUM LOAD DURATION HUMIDITY ONSTRUTION MATERIALS DIMENSIONS PROD. IN AORDANE WITH GUARANTEE BS Burglar alarm panel with embedded BS466 keypad V A / 5060Hz 15VA Sealed lead acid 12V/1,3Ah Stabilized power supply 13,8V/50mA The AS output powers the external sirens and is used to charge the battery of the siren with a rating of 13,8V 200mA. This output continuously provides power. General outputs with a 13,8V 150mA rating. Activated depending on the panel settings. General power output for devices (13,8V 250mA) 4 independent zone inputs. Terminal resistor 5,6kOhm The maximum load connected to the panel must not exceed 450mA 12 with external load not over 80mA up to 95% ABS polycarbonate 222x146x54 mm 460 gr. EN _Grade 2_lass II & ΕΝ _Type A 2 years PERIPHERALS FOR BS458 BURGLAR ALARM PANEL TYPE ODE DESRIPTION VOLTAGE BS454 P468 BS413 BS413/B GSM Dialer Installation program Autonomous siren with beacon & battery Autonomous siren with beacon & battery (anthracite) from the panel OLYMPIA ALARM MOBILE APPLIATION (iolympia) > iolympia application gives access to user's burglar alarm system, using smartphone's SMS. It is published in Android OS (Google) and ios (Apple) as well. It is able to handle many locations simultaneously (home, office etc). The android version can operate in tablets, that carry a SIM holder. > The access capabilities to a location are the same with the GSM's, but the application is taking actions with the press of a single button. The user can give commands from the application to arm or disarm the system, to receive SIM credit information, to send codes, panic alarm and silent alarm, as well as driving the outputs of the panel (connected to illuminators, extra sirens, or other devices). The android version offers sound and visual notification from the smartphone in case of alarm (the smartphone is notified via incoming SMS). Recording of SMS delivery reports is also offered. The application comes out with a detailed help menu, explaining all the above capabilities, together with the application menu. 109

111 BURGLAR ALARM SYSTEM D Ε IP34 IP20 IP30 IP20 98 Description > The BS468 is an 8 zone burglar alarm panel. By using the BS469 expansion module in can be expanded to 16 zones. > To control the panel, at least 1 BS466 keyboard is needed. The panel can accept up to 8 keyboards. > The alarm panel has a slot that can accept a remote control receiver BS424. There is also a connector on to which we can install an automatic telephone operator. iolympia application General haracteristics > 5 motion detectors per zone and infinite magnetic > «Smart Home» capability. Lighting control, heating traps(bs429/x). e.t.c. > 3 freely programmable outputs and 1 relay output. > 250 event logging capability. > 1 output for connecting an autonomous external > 50 different users. siren such as the BS413. > 3 separate areas A, B,. Each area operates > 1 output for connecting to a simple siren such as Up independently. Instant one key arming. to 8 BS466 or BS463 keyboard connection capability. > Perimeter arming and full arming functions. > Device for connecting shatter glass contacts. > apability to connect an automatic telephone dialer PSTN, GSM for remote control and operation 110

112 BURGLAR ALARM SYSTEMS BURGLAR ALARM PANEL WITH BS466 KEYPAD TYPE PITURE ODE DESRIPTION BS468/KEYPAD & D Burglar alarm panel with BS466 keypad TEHNIAL SPEIFIATIONS FOR BS468 BURGLAR ALARM PANEL WITH BS466 KEYPAD TYPE ODE DESRIPTION OPERATION VOLTAGE ONSUMPTION BATTERY HARGING IRUIT AS SIREN IRUIT ES SIREN IRUIT S P1, P2, P3 RELAY 12V ZONES MAXIMUM LOAD OPERATION TEMPERATURE HUMIDITY ONSTRUTION MATERIALS DIMENTIONS PROD. IN AORDANE WITH GUARANTEE BS468/KEYPAD BS468 Burglar alarm system with BS466 keypad V A / 5060Hz 25VA Sealed lead acid 12V/7Ah Stabilized power supply 13,8V / 400mA The AS output powers the external sirens and is used to charge the battery of the siren with a rating of 13,8V 500mA. This output continuously provides power. The ES output is used to power the internal siren and provides13,8v up to 500mA. It is activated during an alarm and is deactivated when the alarm is finished. General outputs with a 13,8V 200mA rating. Activated depending on the panel settings A relay output with voltfree contacts (N,,NO). The contact has 1A & up to 30VD rating General power output for devices (13,8V 500mA) 8 to 24 independent zone inputs. Terminal resistor 5,6kOhm The max. load connected to the panel (Outputs P1,P2,P3,BS466,12V) must not exceed 1 ο 040 up to 95% ABS polycarbonate 322x241x97 mm 1300 gr. EN _Grade 2_lass II & ΕΝ _Type A 2 years PERIPHERALS FOR BS468/KEYPAD BURGLAR ALARM PANEL TYPE PITURE ODE DESRIPTION VOLTAGE ONSUMPTION BS466 BS463 BS413 BS413/B BS465 BS464 BS469 P468 RF467* RF468 Ε B A Keypad with LD display Keypad without display Autonomus siren with battery Autonomus siren with battery (anthracite) PSTN Dialer card GSM Dialer card 8 zone expansion card Installation programm Remote control transmitter 433MHz Wireless remote control receiver 433MHz from the panel from the panel from the panel from the panel from the panel from the panel from the panel 50mA 40mA 140mA // 20mA / 50mA 30mA / 120mA 40mA BS464 BS469 BS465 RF468 RF467 Please turn to page 109 for information about Olympia Alarm Mobile Application (iolympia) * Trade product 111

113 BS458/ΚΙΤ Single packaging BS468/ΚΙΤ 112 Single packaging

114 BURGLAR ALARM SYSTEMS BS458/KIT BURGLAR ALARM SET TYPE ODE DESRIPTION BS458/KIT Burglarm alarm set THE BS458/KIT ONTAINS: TYPE PS. ODE DESRIPTION VOLTAGE ONSUMPTION BS458 BS413 BS405/A BS429/W* A989* zone burglar alarm panel with embedded keyboard Aut. siren & beacon with 989 battery 12V/1.3Ah IR movement detector for burglar alarm system Magnetic trap (white) Battery 12V/1.3Ah V A 816V D 15VA 8mA BS468/KIT BURGLAR ALARM SET TYPE ODE DESRIPTION BS468/KIT Burglarm alarm set THE BS468/KIT ONTAINS: TYPE PS. ODE DESRIPTION VOLTAGE ONSUMPTION BS468/KEYPAD BS466** BS413 BS405/A BS429/W* A986* P ** ontained in the BS468/keypad Burglar alarm panel BS 468 with keypad Keypad with LD display Siren beacon with battery V 1.3Ah IR movement detector for burglar alarm system Magnetic contact (white) N Lead battery 12V/7A Software for BS468 & mini usb cable for P V A 25VA * Trade products 113

115 BURGLAR ALARM SYSTEMS Peripheral devices D Ε F G H Ι J K L IP40 114

116 BURGLAR ALARM SYSTEMS DETETORS TYPE PITURE ODE DESRIPTION VOLTAGE ONSUMPTION BS405/A BS409 BASE401* BS360* BS4000* BS272* BS660/12 BS655/12 BASE6012 BS427* LD12 * J J L F D G G H Ι K IR movement detector for burglar alarm system ombined (microwaveir) detector Base for detectors BS405, BS ο ceiling mounted IR detector Detector for external use (2xPIR & DIRFE) IP54 urtain detector up to 12m. TESEO Heat of rise detector 12VD Optical smoke detector 12VD Base with relay for BS655/12, BS660/12 Shatter glass detector for alarm panel Flood detector Packaging contains: 54 τεμ. (BS665/12, BASE6012) Paper box dimensions (LxWxH): 430x280x335 (BS665/12, BASE6012) 8,216V D 8,216V D 8,216V D 816V D 9,616V D 9,616V D 1115V D 1113V D 1016V D 12V D 8mA 10mA 25,5mA 16,5mA 21mA/24mA 21mA/24mA 50mA/2030mA 50mA/2030mA 13mA 15mA 133 gr. 180 gr. 210 gr. 125 gr. 80 gr. OUTDOOR BEAM DETETORS* TYPE PITURE ODE DESRIPTION ALABI30764 ALBI AΒΤ40A AΒΤ100 AΒΕ150 AΒΗ250 Ε Ε Β Β beam, wired type, outdoor detecting distance, 30m 8beam, wired type, outdoor detecting distance, 30m 2beam, wired type, outdoor detecting distance, 40m 2beam, wired type, outdoor detecting distance, 100m 3beam, wired type, outdoor detecting distance, 150m 4beam, wired type, outdoor detecting distance, 250m * Trade products 115

117 BURGLAR ALARM SYSTEMS Peripheral devices D IP20 Ε F G H Ι J K L M 116

118 BURGLAR ALARM SYSTEMS SIRENS SIRENS WITH BEAONS TYPE PITURE ODE DESRIPTION VOLTAGE ONSUMPTION BS413 BS413/DM BS413/B BS441* Β D Siren with beacon & battery 13,614,8V D External siren cover Siren with beacon & battery (anthracite) Ιnterior siren for alarm panel 914V D 6mA 200mA 1875 gr. 980 gr gr. 150 gr. Packaging contains: 7 pcs. Paper box dimensions (LxWxH): 545x395x345mm AUTOMATI TELEPHONE DIALER TYPE PITURE ODE DESRIPTION VOLTAGE ONSUMPTION BS Automatic telephone dialer 1030V D 25/70mA 145 gr. MAGNETI TRAPS* TYPE PITURE ODE DESRIPTION BS429/B BS429/W BS439 BS449/B BS449/W BS459 BS490 J K G M M Ε L Magnetic trap for burglar alarm panel (brown) Magnetic trap for burglar alarm panel (white) Magnetic trap for doors (plastic, white) Magnetic trap (brown) low profile Magnetic trap (white) low profile Heavyduty metallic magnetic trap N & NO Magnetic trap ONTROLS FOR PANELS TYPE PITURE ODE DESRIPTION RF467* RF468 ND 100GLT H Ι F Remote control transmitter 433MHz Wireless remote control receiver 433MHz Manual panic button * Trade products 117

119 BURGLAR ALARM SYSTEMS Wireless Burglar alarm set N D Ε F G H Ι J K L M DESRIPTION Oasis is a professional electronic security system that adjusts exactly to the requirements of your house or apartment. You have an overview of everything that is happening in your household or company via your mobile phone. You already have the essential part of the security system your mobile phone. Events from the guarded area can be also reported to a security services agency that in the case of burglary or possible fire emergency ensures immediate professional intervention on the spot. Your possessions are consequently taken care of despite that fact that you are on holiday or have your phone switched off. General haracteristics The burglar alarm panel can: > up to 50 proximity user cards > up to 50 PIN codes (codes and cards can be combined for higher security) > remote control by mobile phone > be operated remotely by phone > report selected events by SMS to your phone > report all details to a Signal Receiving entre WIRELESS BURGLAR ALARM SYSTEMS > JA82K Offers 4 hard wired zones, up to 50 user codes (cards). Builtin ready BSW451 radio module provides up to 50 addresses for wireless peripherals. Allows 2 level partial setting (or 2 partitions splitting). Records 255 events in the internal memory. Provides audible warning and 2 programmable outputs. Remote access and reporting can be done via GSM, PSTN optional communicators. > JA81F Allows system control and programming.has a builtin RFID card reader. > JA81M Magnetic sensor senses door (or window) opening. Provides an input for external wired magnetic sensors. > JA80L Mains powered siren to sound alarms, exit and entrance warnings, door bell signals and smoke detector triggered chimes. Signals a tamper if disconnected (by A operation voltage). > JA80A Wirefree siren in a robust housing. Its lithium battery lifetime is from 3 to 5 years (depends on alarm rate). 118

120 BURGLAR ALARM SYSTEMS WIRELESS BURGLAR ALARM PANEL WITH 50 ADDRESSES TYPE PITURE ODE DESRIPTION BSW Wireless burglar alarm panel with 50 addresses WIRELESS BURGLAR ALARM PANEL BSW450 (50 ADDRESSES) TYPE ODE DESRIPTION OPERATION VOLTAGE BATTERY S DIMENSIONS PRODUED IN AORDANE WITH BSW Wireless burglar alarm panel with 50 addresses V A / 5060Hz Lead battery Pb 12V/ 1.3Ah PEX, PGX, max. 0,1 258x214x77 EN _Grade 2_lass II & ΕΝ _Type A WIRELESS BURGLAR ALARM SET* TYPE PITURE ODE DESRIPTION JK84 N Wireless burglar alarm KIT (BSW464)** ** It contains: 1xBSW450, 1xA992 Lead battery 12V/2Ah(included in the price), 1xJA80L, 1xJA83P, 1xJA83M, 1xR86K (Batteries of the peripheral devices are included) WIRELESS BURGLAR ALARM SYSTEM* TYPE PITURE ODE DESRIPTION VOLTAGE ONSUMPTION BATTERY JA81F JA81M JA83M JA80L JA80A Keypad with LD screen (BSW453) Door detector (BSW460) Wireless door detector Internal siren (BSW452) Outdoor siren (BSW461) DETETORS * (Batteries are not included in the price) JA80P JA83P JA84P JA85B JA80PB JA85ST JA88P Motion detector (BSW454) Wireless motion detector Motion detectorwith camera & flash (BSW466) Glass break detector (BSW459) ombined detector (BSW455) Wireless optical smoke & heat detector (BSW456) Outdoor motion detector (BSW463) AESSORIES * (Batteries are not included in the price) JA82Y R86K JA80X JA80Q R89 AN81 D M Β Ε F L J H K G Ι GSM module (BSW457) Activation & deactivation keyfob (BSW458) Voice module (BSW462) Photo transmission module (BSW465) Wireless doorbell button (BSW467) External ANTENNA for signal support (BSW468) 230 V 12V D 5V D 1 W 35mA 2mA 2 x Lith. (3,0V) Lith. (3,6V AA) Lith. (3V R123A) Lith. BAT 80 TYPE PITURE ODE DESRIPTION VOLTAGE ONSUMPTION BATTERY Lith. (3,6V AA) Lith. (3V R123A) Lith. (3,6V AA) Lith. (3,6V ½AA) Lith. (3,6V AA) Lith. (3,6V AA) Lith. (3,6V AA) TYPE ODE DESRIPTION VOLTAGE ONSUMPTION BATTERY lcaline (6,0V) lcaline (6,0V) JA80Y *Trade product JA80Χ JA80Q R86K R89 Ν81 119

121

122 OTHER ATEGORIES GENERAL PURPOSE DEVIES ONTROL WARNING UNITS

123 GENERAL PURPOSE DEVIES D IP42 H Ε F G IP20 IP30 Ι M J K L IP20 IP30 IP20 IP40 N Ο P Q R 122 IP40 IP20 IP42

124 GENERAL PURPOSE DEVIES GENERAL PURPOSE DEVIES TYPE PITURE ODE DESRIPTION VOLTAGE ONSUMPTION BS542 Ι Siren with beacon 100dB, (BS690, BS691) 12V D 0,3W 1030 gr. BS576/L K Beacon with incandescent LED lamp 1224V D 25mA 170 gr. BS520 P Siren, 100dB, (Nid) V A 4VA 420 gr. BS521 P Siren with beacon, 100dB, (Nid) V A 4VA 425 gr. BS520/WP P Siren, 100dB, IP 65 (Nid) V A 4VA 430 gr. BS521/WP P Siren with beacon,100db, IP 65 (Nid) V A 4VA 435 gr. BS580 K Beacon with ΧΕΝΟΝ lamp 3VA 175 gr. BS590* L Fire alarm bell V A 51VA 1330 gr. BS537* BS595* J ancel call point extinguishing Electronic alarm bell V A 15mA 145 gr. 500 gr. BS620 H Public address unit 24V D 3A/12V D 350 gr. BS554 Q Megaphone, siren and beacon for BS mA 410 gr. BS50* D Microphone for the BS V D 200 gr. BS572 R Remote detector LED (red) 10mA 70 gr. BS531/WP P Siren with beacon 100dB, IP V D 40mA 300 gr. Packaging contains: 24 pcs. (BS554, BS595) 36 pcs. (BS576, BS528, BS579) Paper box dimensions (LxWxH):430x280x pcs. (BS520, BS521, BS520/WP, BS521/WP, BS580), 36pcs. (BS577), 5pcs. (BS590) Paper box dimensions (LxWxH): 430x280x335 (BS520, BS521, BS520/WP, BS521/WP, BS580), 430x375x275 (BS590) FIRE ALARM INDIATION LUMINAIRES & SIGN TYPE PITURE ODE DESRIPTION VOLTAGE ONSUMPTION BS528 G BS527 F BS527/WP Ε Message indication sign 1224V D Indication slave luminaire with buzzer 1224V D Waterproof IP65 indic. slave lum. with buzzer 1224V D 140mA 85mA 85mA 1030 gr. 410 gr. 830 gr. Packaging contains: 24 pcs. (BS527), 12 pcs. (BS527/WP) Paper box dimensions (LxWxH): 430x280x335 (BS527), 500x375x315 (BS527/WP) AUTOMATI TELEPHONE DIALER TYPE PITURE ODE DESRIPTION VOLTAGE ONSUMPTION BS489 Β Automatic telephone dialer 1030V D 25/70mA 145 gr. AUTONOMOUS GENERAL PURPOSE DEVIES TYPE PITURE ODE DESRIPTION VOLTAGE ONS. BS3001 M Siren with beacon, fire ext. call point and backup light (230V) V A BS3002 N Siren with beacon & fire extinguishing call point, battery (3xAA) 4,5V D 3VA Packaging contains: 22 pcs. Paper box dimensions (LxWxH): 500x375x315 GENERAL PURPOSE DEVIES 85265V A/5060Hz TYPE PITURE ODE DESRIPTION ONSUMPTION GR24/121 GR24/241 A A Stabilized power supply 12V D, 4 output Stabilized power supply 24V D, 2 output 163VA 163VA 5400 gr gr. SPEIAL PURPOSE DEVIES TYPE PITURE ODE DESRIPTION VOLTAGE ONSUMPTION BS162 Ο BS164 Ο V module for electrovalve unit 24V module for electrovalve unit 1115V D 15mA 1115V D 30mA 180 gr. 190 gr. Packaging contains: 48 pcs. Paper box dimensions (LxWxH): 430x280x335mm * Trade product 123

125 ONTROL DEVIES WARNING UNITS Motion detectors & General purpose sirens IP42 IP20 D Ε IP55 Dimensions in mm GR BS BS500, BS540, BS

126 ONTROL DEVIES WARNING UNITS IR MOTION DETETOR TYPE PITURE ODE DESRIPTION VOLTAGE ONSUMPTION GR55 D IR Motion detector, 1 KW/0,1 hp V A 6VA GENERAL PURPOSE SIRENS TYPE PITURE ODE DESRIPTION VOLTAGE ONSUMPTION BS500 BS540 BS545 Β Β Β Telephone siren with dimmer, 40105dB General purpose siren, 0100dB General purpose siren, 0100dB Packaging contains: 36 pcs. Paper box dimensions (LxWxH): 430x280x335mm VA 1224V D VA 6VA 150mA/4W 6VA GENERAL PURPOSE SIRENS WITH BEAON TYPE PITURE ODE DESRIPTION VOLTAGE ONSUMPTION BS505 BS546 BS505/WP Telephone siren, 105dB General purpose siren, 100dB Telephone siren, waterproof IP65, 105dB Packaging contains: 16 pcs. (BS505, BS505/WP) Paper box dimensions (LxWxH): 430x280x335mm V A V A V A 4,5VA 6VA 4,5VA ONTROL DEVIES WARNING UNITS TYPE PITURE ODE DESRIPTION VOLTAGE ONSUMPTION WiDA2 AN100* Ε Device control with SMS Antenna 2,5m. for WiDA2 230V or 915V D 100mA * Trade product 125

127 ALL ALM RESET NUMERATORS LED ALERT IP20 IP30 IP20 Paper box dimentions (LxWxH): 205x80x250 mm (BS748), 160x115x35 mm (BS746), 210x105x70 mm (BS716) General characteristics > ontrolled via a remote BS746 keyboard (mounted in the reception area). > Room number programming and display indication Network capability with upto 5 BS748 panels (240 rooms in total) > Presence indication mode displayed on the BS746 keyboard > Degrees of cover protection: IP 20. > Produced in accordance with European norms: ΕΝ Numerator panels are suitable for hotel & rented room installations. Their purpose is to inform us of any call coming from the monitored area. The numerator series consists of the following units: > The BS716 is a 6 zone panel. It can monitor upto 16 different areas with a numeration capability. > The BS748 is a 48 zone connection panel. It can be used to monitor upto 48 different areas and requires the BS746 keyboard to operate. > The panel informs us by using audible and visual means. The call towards the panel is implemented by pressing a common push or pullcord button. > The BS746 keyboard cooperates with the BS748 connection panel and is used for displaying information concerning incoming call and for controlling and programming the system. Dimensions in mm

128 LED ALERT NUMERATORS LED ALERT TYPE PITURE ODE BS716 BS746 BS748 Β DESRIPTION OPERATION VOLTAGE ONSUPTION 16 zone numerator panel (non expandable) VA/5060Hz 6VA Keyboard for BS748 num. panel 30mA 48 up to 240 zones expandable numerator panel VA/5060Hz 6VA A connection diagram between 5 BS748 panels and 5 BS746 keyboards for implementing a 240 room numerator system. N 230V A L Button Νο 1 Button Νο 49 Button Νο 97 Button Νο 2 Button Νο 50 Button Νο 98 Button Νο 48 Button Νο 96 Button Νο 144 Network cable Power supply cable 127

129

130 HOTEL AESS RFID ARDSWITHES

131 HOTEL AESS ARD SWITHES RFID IP20 D Ε F G H Ι OLYMPIA ELETRONIS DOOR LOK AESS, ING & AIRONDITIONING ONTROL IRUITS WITH RFID TEHNOLOGY > A selfcontained system that does not require a network connection with all the hotel. > Easy installation & High security protection. > Easy and fast programming. > Modern design low profile. > apability to program upto 20 customer cards with lighting only or lighting & airconditioner access. > apability to program upto 20 personnel card with access to all rooms. > The RF52/A card switch is waterproof with IP 65 cover protection. > RF50/T card with laser printing (hotels logos and room numbers). > The RF54/A control unit has 2 relays 230V A/25A and 1 output for electric door locks 12V A/D0,5A. an be mounted on conventional electrical box rail mounts. > The RF52/A/D card switch incorporates a 4digit room number display ING & AIRONDITIONING ONTROL UNITS WITH RFID TEHNOLOGY > The cards used for accessing the lighting and airconditioning of a room are not programmed by the user. During the order use the respective code depending on the type of card that is required. For lighting only access order code (RF51/), and for lighting and airconditioning access order code (RF51/Β). > Respectively you can order cards with laser printed logos and room numbers by using the order codes RF51//Τ & RF 51/Β/Τ. > The RF57/A control unit has 2 relay outputs 230V A/25A. > The A/ circuit is active only if the windows are closed. This is accomplished only if the magnetic window contacts are used. Dimensions in mm & Β. D. Ε. F & G

132 HOTEL AESS RFID DOOR LOK, ING AND AIRONDITIONING ONTROL IRUITS WITH RFID TEHNOLOGY TYPE PITURE ODE DESRIPTION VOLTAGE ONS. RF50 RF50/Τ RF52/A RF52/A/D RF53/A RF54/A A42 Ε Ε Β A D F Access card for RF52/A, RF52/A/D, RF53/A Lazer printed access card for RF52/A, RF52/A/D, RF53/A IP 65, RFID card switch for RF54/A from the RF54/A IP 65, RFID card switch for RF54/A with display from the RF54/A RFID card switch for RF54/ from the RF54/ Door lock, lighting & A/ control unit (2x25A) V A Recess mounting base 60mA 85mA 60mA 25VA 10 gr. 10 gr. 135 gr. 155 gr. 95 gr. 265 gr. 90 gr. Packaging contains: 26 pcs. (RF52/A) 56pcs.Paper box dimensions (LxWxH): 270x230x230mm (RF52) 430x280x335 (RF56) ING & AIRONDITIONING ONTROL UNITS WITH RFID TEHNOLOGY TYPE PITURE ODE DESRIPTION VOLTAGE ONS. RF42 RF43 RF51/A RF51/A/Τ RF51/B RF51/B/Τ RF57/ A42 B D Ι Ι Ι Ι G RFID card switch for RF57/A RFID card switch for RF57/A Access card for lighting for RF42, RF43 Laser printed access card for lighting Access card for lighting & A/ Laser printed access card for lighting & A/ ontrol unit for lighting and airconditioning Recess mounting base from the RF57/A from the RF57/A V 50mA 50mA 5VA 95 gr. 10 gr. 10 gr. 10 gr. 10 gr. 215 gr. Packaging contains: 100 pcs. (RF43) 56 pcs. (RF57/A) Paper box dimensions (LxWxH): 430x280x335 MAGNETI TRAPS TYPE PITURE ODE DESRIPTION BS429/B* BS429/W* H H Magnetic trap for burglar alarm panel (brown) Magnetic trap for burglar alarm panel (white) * Trade products 131

133 HOTEL AESS ARD SWITHES IP20 D Ε F SIMPLE OR MAGNETI ARD SYSTEMS > Single color room number card printing capability > Suitable for Hotels and rented rooms > Relay output contact protection. BIOLOR PRESENE INDIATORS RF58 and RF58/T > Suitable for Hotels and rented rooms > Room number on card, Laser printing capability > Suitable for installation in common electrical boxes > Modern design, slim profile Dimensions in mm & Β.. D Ε. F

134 HOTEL AESS MAGNETI ARD SWITHES TYPE PITURE ODE DESRIPTION VOLTAGE ONSUMPTION GR43 D Magnetic card switch for GR45/, GR46/,GR47/, GR57/ 12V D 8mA 110 gr. GR50 D Magnetic card switch for relay connection V A 1VA 100 gr. GR Magnetic card for GR43 & GR50 20 gr. GR44/Τ Laser printed magnetic card for GR43 & GR50 laser 20 gr. Packaging contains: 54 pcs. (GR43, GR50) Paper box dimensions (LxWxH): 430x280x335 ONTROL UNITS TYPE PITURE ODE DESRIPTION VOLTAGE ONSUMPTION GR45/A Ε Airconditioner controller (1x16A) V A 4VA 185 gr. GR46/A Ε Room lighting controller (1x16A) V A 4VA 230 gr. GR47/A Ε A/ and lighting controller (2x16A) V A 4,5VA 250 gr. GR47//NODELAY Ε A/ and light. contr., no time delay(2x16a) V A 4,5VA 250 gr. GR56/A Ε Room lighting controller (25) V A 4,5VA GR57/ Ε Room lighting & A/ controller (2x30) V A 5VA 305 gr. Packaging contains: 100 pcs. (GR45/A, GR46/A, GR47/A) 56 pcs. (GR56/A, GR57/A) Paper box dimensions (LxWxH): 430x280x335 OMMON ARD SWITHES TYPE PITURE ODE DESRIPTION VOLTAGE ONSUMPTION GR48 GR49 GR49/T D Power supply card switch ard for GR48 Laser printed ard for GR48 Packaging contains: 54 pcs. (GR48) Paper box dimensions (LxWxH): 430x280x V A 1VA INDIATORS TYPE PITURE ODE DESRIPTION VOLTAGE ONSUMPTION GR52 RF58 RF58/T F Β Presence LED indicator Presence LED indicator (red & green LED) Laser printed presence LED indicator (red & green LED) V A V A V A 6VA 7VA 7VA AESSORIES Rosettes for RF58 & RF58/T TYPE ODE OLOUR TYPE ODE OLOUR ROUNDED A82/G A82/SL A82/Ni Gold Silverpink pearlescent Nickel SQUARE A82/G/SQ A82/SL/SQ A82/W/SQ Gold Silverpink pearlescent White G SL Ni *In the price of RF58 & RF58/T included one of the rosettes above. G SL W Please define during the order the type you require using the codes. 133

135 25% economy* Energy saving compared with the bimetallic thermostats New room thermostat BS812 with batteries High aesthetics / Low profile 27mm. / User friendly / 3 operation modes: manual, daily, weekly / Easy operation via 8 keys / Easy programming / Multi function LD with backlight / lock, calendar / Keyboard lock / Upper and lower limit settings / Manual temperature selection / Heating and cooling function

136 ELETRONI THERMOSTATS

137 ELETRONI THERMOSTATS IP20 G D Ε F BS812, BS813, BS > 3 operation modes: manual, daily, weekly > Easy operation via 8 keys > Easy programming > Multi function LD with backlight > lock, calendar > Keyboard lock > Upper and lower limit settings > Manual temperature selection > Boiler option (BS813) > Heating and cooling function. 2. B844/2 A Dimensions in mm. Β / ,8 D. Ε

138 ENERGY FIREPLAE THERMOSTAT WITH SPEED ADJUSTMENT V A/4555Hz TYPE PITURE ODE DESRIPTION ONSUMPTION BS840 BS841 Β D Programmable Recessed programmable max. 3VA/2,5W max. 3VA/2,5W Adj. up to 200W Adj. up to 200W 300 gr. 310 gr. Packaging contains: 12 pcs. Paper box dimensions (LxWxH): 315x265x205mm PROGRAMMABLE THERMOSTAT FOR WOODURNER V A/4555Hz TYPE PITURE ODE DESRIPTION ONSUMPTION BS844 BS844/2 Ε Ε Recessed thermostat for woodburner Recessed (2 sensor ability) max. 3VA/2,5W max. 3VA/2,5W Up to 200W/230V0,65A Up to 200W/230V12A 300 gr. 300 gr. Packaging contains: 12 pcs. Paper box dimensions (LxWxH): 315x265x205mm ELETRI SOKET THERMOSTAT FOR HEATERS AND INFRARED PANELS TYPE PITURE ODE DESRIPTION ONSUMPTION BS Electric socket thermostat 0,5VA Relay 250V16A 200 gr. Packaging contains: 28 pcs. Paper box dimensions (LxWxH): 315x265x205mm PROGRAMMABLE ELETRONI ROOM THERMOSTATS V A/5060Hz WITH 2 BATTERIES TYPE PITURE ODE DESRIPTION BS812 BS813 BS814 A A A Programmable electronic thermostat with battery Programmable electronic thermostat with battery & boiler Programmable electronic thermostat with relay for heating elements 5/250V 2x5A/250V 12A/250V 180 gr. 190 gr. 190 gr. Packaging contains: 34 pcs. Paper box dimensions (LxWxH): 315x265x205mm WIRELESS PROGRAMMABLE ELETRONI ROOM THERMOSTATS V A/5060Hz WITH 2 BATTERIES TYPE PITURE ODE DESRIPTION BS818 BS819 A & G A & G Battery operated wireless programmable room thermostat Battery operated wireless program. room thermostat with boiler output 5/250V 2x5A/250V 180 gr. 190 gr. ELETROMEHANIAL ROOM THERMOSTATS V A/5060Hz TYPE PITURE ODE DESRIPTION ONSUMPTION BS900* BS901* F F Room thermostat Room thermostat with boiler output ontact 230V/8A ontact 230V/2x10A 120 gr. 120 gr. AESSORIES FOR THE WIRELESS THERMOSTATS TYPE PITURE ODE DESRIPTION BS818/T BS819/T BS818/R BS819/R A A G G Battery operated wireless transmitter for programmable room thermostat BS818 Battery operated wireless transmitter for program. room thermostat with boiler command BS819 Wireless receiver for programmable room thermostat BS818 Wireless receiver for programmable room thermostat with boiler output BS819 AESSORIES TYPE PITURE ODE DESRIPTION 844/2 A840 B844/ Type J temperature sensor 450 for BS844/2 Temperature sensor for BS Temperature sensor for BS844/2 The digital programmable thermostats are new advanced products in the room thermostat field. The intelligent concept, elegant design and high quality construction renders them suitable for installation in any area and can meet any requirement. 137

139

140 ELETRI INSET TRAPS

141 ELETRI INSET TRAPS High voltage grid IP20 D E Single box Packaging dimensions (LxWxH): 330 x 110 x 340 mm ( RT11) & 500 x 165 x 425 ( RT12) General haracteristics > Elegant appearance > All models operate using special Black Light (BL) tubes > Easy installation > UV resistant plastic parts > Two portable models (RT11, RT12) > onstruction material: Fire retardant ABS, electrostaticpainted > A full range of professional models for large areas aluminum > Special models with mirror for wall mounting installations (RT14/6, RT14/7, RT15/6, RT15/7). > Produced in accordance with: ΕΝ > Easy to clean insect collecting drawer > Research proven, UV insect attracting lighting Dimensions in mm RT11 RT12 RT14, RT (RT14, RT14/2, RT14/7) (RT15)

142 ELETRI INSET TRAPS ELETRI INSET TRAP WITH HIGH VOLTAGE GRID V A TYPE PITURE ODE LAMPS ONSUMPTION RT11 A BL 2 x 8W 30VA OVERING AREA 2 40 m gr. ELETRI INSET TRAP WITH HIGH VOLTAGE GRID V A TYPE PITURE ODE RT Β LAMPS ONSUMPTION BL 2 x15w 100VA Transparent protective grid for RT12 OVERING AREA 2 80 m gr. ELETRI INSET TRAPS WITH HIGH VOLTAGE GRID (SUITABLE FOR PROFESSIONAL USE) V A TYPE PITURE ODE RT LAMPS BL 3 x 20W ONSUMPTION 170VA OVERING AREA m gr. ELETRI INSET TRAPS WITH HIGH VOLTAGE GRID V A OVERING TYPE PITURE ODE LAMPS ONSUMPTION AREA 2 RT114 E BL 3 x 20W 170VA 160 m gr. ELETRI INSET TRAP WITH HIGH VOLTAGE GRID V A TYPE PITURE ODE LAMPS ONSUMPTION RT15 D BL 3 x 40W 270VA OVERING AREA m gr. 141

143 ELETRI INSET TRAPS Special glue IP20 Ε F G D General characteristics > Environmental friendly. > Research proven insect attracting UV lighting. > onstructed according to HAP regulations. > Table mounted installation capability (special accessory) > Glue trap, resistant to UV rays and high temperature. > onstructional material: Fire retardant ABS, electrostatically painted aluminum. > Produced in accordance with: ΕΝ In the food and beverage industry it is mandatory to adhere to HAP regulation, according to which it is prohibited to use chemicals and high voltage grids in the construction of electric insect traps. In replacement to the high voltage grid, a special factory inspected glue trap is used. The respective legislative regulation are ΤL/195/97 E93/43 and 96/3 of European council on the 14th of June This specific legislation is mandatory for the whole of the food industry as well as the food service industry (restaurants, candy shops, bakeries, meat and super markets e.t.c). The new product RT1 combines the use as a portable insect trap and as a night light. It s blue light has a special frequency which attracts insects and offers a special replaceable trap sheet. The coverage area is approximately one room. Dimensions in mm RT22 RT24 RT22/HAP RT24/HAP 400 RT50/HAP, RT60/HAP RT50: 660 RT60 : RT52: 660 RT62: RT52/HAP, RT62/HAP RT30,RT36, RT30/HAP 200

144 ELETRI INSET TRAPS WITH GLUE from the DELUXE FLYTRAP series V A TYPE PITURE ODE LAMPS ONSUMPTION RT30 RT30/SL RT30/HAP RT30/HAP/SL RT36 RT36/SL Β Β Β Β Β Β BL 2x8W BL 2x8W 2x8W BL/HAP 2x8W BL/HAP PL 26W BL PL 26W BL 35VA 35VA 35VA 35VA 70VA 70VA OVERING AREA 2 40 m 2 40 m 2 40 m 2 40 m 2 60 m 2 60 m 1000 gr gr gr gr gr gr. REPLAEMENTS from the DELUXE FLYTRAP series TYPE ODE DESRIPTION A1030 A Protective bird grid (in case of external use) Glue board for Deluxe Fly (12 pieces) ELETRI INSET TRAPS WITH GLUE from the FOODY`S FLYTRAP series V A TYPE PITURE ODE LAMPS ONSUMPTION RT20 RT22 RT22/HAP RT24 RT24/HAP Ε BL 2x8W BL 2x15W 2x15W BL/HAP BL 4x15W 4x15W BL/HAP 92VA 92VA 180VA 180VA OVERING AREA 2 40 m 2 80 m 2 80 m m m 4200 gr gr gr gr. REPLAEMENTS from the FOODY`S FLYTRAP series TYPE ODE DESRIPTION A1050 A A Glue board for RT22 (single sided) Glue board for RT24 (double sided) Protective grid (transparent) for RT22 & RT24 Replacement tab for RT20 ELETRI INSET TRAPS WITH GLUE from the PROFESSIONAL DELUXE FLYTRAP series V A TYPE PITURE ODE LAMPS ONSUMPTION RT50/HAP RT52/HAP RT60/HAP RT62/HAP D D BL 1x20W BL 2x20W BL 1x40W BL 2x40W 87VA 179VA 93VA 192VA OVERING AREA 2 80 m m m m 2750 gr gr gr gr. REPLAEMENTS from the PROFESSIONAL DELUXE FLYTRAP series TYPE ODE DESRIPTION A Glue board for Deluxe Fly (12 pieces) ELETRI INSET TRAPS WITH GLUE V A TYPE PITURE ODE RT70 RT70/HAP RT72 RT72/HAP RT74 RT74/HAP F F G G F F LAMPS BL 2x15W HAP 2x15W BL 2x15W (2sided) HAP 2x15W (2sided) BL 4x15W (2sided) HAP 4x15W (2sided) ONSUMPTION 51W/100VA 51W/100VA 51W/100VA 51W/100VA 100W/200VA 100W/200VA OVERING AREA 2 80 m 2 80 m m m m m REPLAEMENTS FOR RT70, RT70/HAP TYPE ODE DESRIPTION A Glue board (10 pieces) 143

145

146 MARKING SIGNS REPLAEMENTS AESSORIES

147 MARKING SIGNS They are installed in areas where it is vital to guide and inform the public without the need of emergency illumination. SP214/S229 SP214/S228 SP214/S232 SP215/S65R SP216/S65R * Please mention the type of the sign with extension of the required marking diagram. i.e. SP314/S229 Additional cost for drawings out of catalog. MARKING SIGNS PV from the SAFETY PANEL series TYPE SP210/Ph SP214 SP214/Ph/S229 SP214/Ph/S252 SP214/Ph/S228 SP215 SP215/Ph SP216 ODE DESRIPTION Marking sign from PV with 0.75mm thickness (10x10cm ) fosforize Marking sign from PV with 0.75mm thickness (21x21cm ) Marking sign from PV with 0.75mm thickness (21x21cm )fosforize Marking sign from PV with 0.75mm thickness (21x21cm ) fosforize Marking sign from PV with 0.75mm thickness (21x21cm ) fosforize Marking sign from PV with 0.75mm thickness (13.5x 31.5cm ) Marking sign from PV with 0.75mm thickness (13.5x 31.5cm ) fosforize Marking sign from PV with 0.75mm thickness (21 x 42.5cm ) EXIT EXIT EXIT S60L S60R S60D S65L S65R S65D Please mention the type of the sign followed by the type of the marking e.g. S00800/S65L LEGENDS / MARKING SIGNS TYPE ODE DESRIPTION S Exit sticker 215x65 mm for the Slim Light luminaires S Exit sticker 195x90mm for the lassic Light & omfort Light luminaires S Exit sticker 240x95mm for the GR1006/9L/, GR1006 luminaires S Exit sticker 240x100mm for the GR1009/L luminaires S Exit sticker 260x80mm for the Professional Light luminaires S Exit sticker 280x110mm for the Easy Light luminaires S Exit sticker 242x131mm for the Easy Light luminaires S Exit sticker 310x140mm for the Double Light luminaires S Exit sticker 260x120mm for the Global Light luminaires S /17/18 Exit sticker 260x120mm (waterproof) for the Weather Light luminaires SP Double sided PV 6mm marking panel PV 6mm for the Easy Light GR310 luminaires SP Double sided PV 6mm marking panel PV 6mm for the omfort Light luminaires SP Double sided PV 6mm marking panel PV 6mm for the Easy Light GR3xx/A luminaires LEGENDS / MARKING OVERLAY (MLD, SLD, ZLD) 146 TYPE ODE DESRIPTION SW28/L SW28/R SW28/DR SW28/DL SW28/UL SW28/UR SW34/R SW34/L SW34/DR SW34/DL SW34/UR SW34/UL SW44/L SW44/DR SW44/DL SW44/R SW44/UR SW44/UL Marking overlay, left indication (GRxLD28) Marking overlay, right indication (GRxLD28) Marking overlay, down right indication (GRxLD28) Marking overlay, down left indication (GRxLD28) Marking overlay, up left indication (GRxLD28) Marking overlay, up right indication (GRxLD28) Marking overlay, right indication (GRxLD34) Marking overlay, left indication (GRxLD34) Marking overlay, down right indication (SLD34) Marking overlay, down left indication (SLD34) Marking overlay, up right indication (SLD34) Marking overlay, up left indication (SLD34) Marking overlay, left indication (SLD44) Marking overlay, down right indication (SLD44) Marking overlay, down left indication (SLD44) Marking overlay right indication (GRxLD44) Marking overlay, up right indication (GRxLD44) Marking overlay, up left indication (GRxLD44)

148 They are installed in areas where it is vital to guide and inform the public without the need of emergency illumination. MARKING SIGNS The symbols below are according to European Norms. SAFE ONDITION SIGNS Ε001 Emergency exit (left hand) Ε013 Stretcher Ε002 Emergency exit (right hand) Ε016 Emergency window with escape ladder Ε003 First aid Ε017 Rescue window Ε004 Emergency telephone Ε018 Turn anticlockwise to open Ε005 Direction, arrow (90 increments), safe condition Ε019 Turn clockwise to open Ε006 Direction, 45 arrow (90 increments), safe condition Ε007 Evacuation assembly point Ε008 Break to obtain access Ε009 Doctor Ε010 Automated external heart defibrillator Ε011 Eyewash station Ε012 Safety shower FIRE EQUIPMENT SIGNS F001 Fire extinguisher F002 Fire hose reel F003 Fire ladder F004 ollection of firefighting equipment F005 Fire alarm call point F006 Fire emergency telephone MANDATORY ATION SIGNS Μ001 General mandatory action sign Μ014 Wear head protection Μ002 Refer to instruction manual/booklet Μ015 Wear highvisibility clothing Μ003 Wear ear protection Μ016 Wear a mask Μ004 Wear eye protection Μ017 Wear respiratory protection Μ005 onnect an earth terminal to the ground Μ018 Wear a safety harness Μ006 Disconnect mains plug from electrical outlet Μ019 Wear a welding mask Μ007 Opaque eye protection must be worn Μ020 Wear safety belts Μ008 Wear safety footwear Μ021 Disconnect before carrying out maintenance or repair Μ009 Wear protective gloves Μ022 Use barrier cream Μ010 Wear protective clothing Μ023 Use footbridge Μ011 Wash your hands Μ024 Use this walkway Μ012 Use handrail Μ025 Protect infants eyes with opaque eye protection Μ013 Wear a face shield Μ026 Use protective apron PROHIBITION SIGNS P001 General prohibition sign P002 No smoking P003 No open flame; Fire, open ignition source and smoking prohibited P004 No thoroughfare P005 Not drinking water P006 No access for forklift trucks & other industrial vehicles P007 No access for people with active implanted cardiac devices P008 No metallic articles or watches P010 Do not touch P011 Do not extinguish with water P012 No heavy load P013 No activated mobile phones P014 No access for people with metallic implants P015 No reaching in P017 No pushing P018 No sitting P019 No stepping on surface P020 Do not use lift in the event of fire P021 No dogs P022 No eating or drinking P023 Do not obstruct P024 Do not walk or stand here P025 Do not use this incomplete scaffold P026 Do not use this device in a bathtub, shower, or waterfilled reservoir P027 Do not use this lift for people P028 Do not wear gloves WARNING SIGNS W001 General warning sign W002 Warning; Explosive material W003 Warning; Radioactive material or ionizing radiation W004 Warning; Laser beam W005 Warning; Nonionizing radiation W006 Warning; Magnetic field W007 Warning; Floorlevel obstacle W008 Warning; Drop (fall) W009 Warning; Biological hazard W010 Warning; Low temperature/ freezing conditions W011 Warning; Slippery surface W012 Warning; Electricity W013 Warning; Guard dog W014 Warning; Forklift trucks and other industrial vehicles W015 Warning; Overhead load W016 Warning; Toxic material W017 Warning; Hot surface W018 Warning; Automatic startup W019 Warning; rushing W020 Warning; Overhead obstacle W021 Warning; Flammable material W022 Warning; Sharp element W023 Warning; orrosive substance W024 Warning; rushing of hands W025 Warning; ounterrotating rollers W026 Warning; Battery charging 147

149 PHOTO LUMINESENT MARKING SIGNS FOR SHIPS The symbols below are according to European Norms. IMO101 IMO111 IMO203 IMO213 IMO223 IMO233 IMO243 IMO406 IMO417 IMO102 IMO112 IMO204 IMO214 IMO224 IMO234 IMO244 IMO408 IMO418 IMO103 IMO113 IMO205 IMO215 IMO225 IMO235 IMO301 IMO409 IMO419 IMO104 IMO114 IMO206 IMO216 IMO226 IMO236 IMO302 IMO410 IMO420 IMO105 IMO115 IMO207 IMO217 IMO227 IMO237 IMO401 IMO411 IMO421 IMO106 IMO116 IMO208 IMO218 IMO228 IMO238 IMO402 IMO412 IMO422 IMO107 IMO117 IMO209 IMO219 IMO229 IMO239 IMO403 IMO413 IMO423 IMO108 IMO118 IMO210 IMO220 IMO230 IMO240 IMO404 IMO414 IMO424 IMO109 IMO201 IMO211 IMO221 IMO231 IMO241 IMO405 IMO415 IMO425 IMO110 IMO202 IMO212 IMO222 IMO232 IMO242 IMO406 IMO416 IMO426 IMO427 IMO428 IMO

150 AESSORIES / REPLAEMENTS LAMPS (1 year guarantee ) TYPE ODE DESRIPTION Fluorescent lamp 15W /HAP Fluorescent lamp 15W(Black light)uv for RT12,RT22,RT24 Unbreakable fluorescent lamp 15W(Black light)uv for RT22, RT24 Fluorescent lamp 8W(Black light)uv for RT11,RT30 983/HAP Unbreakable fluorescent lamp 8W(Black light)uv for RT30/HAP /HAP Fluorescent lamp 20W(Black light)uv for RT14,RT50,RT52 Unbreakable fluorescent lamp 20W(Black light)uv for RT50, RT52 Fluorescent lamp 40W (Black light)uv for RT15,RT60,RT62 985/HAP Unbreakable fluorescent lamp 40W(Black light)uv for RT60,RT62 Lamp PL 26W(Black light)uv for RT Fluorescent lamp 6W /D Fluorescent lamp 8W /D Fluorescent lamp 18W Fluorescent lamp 11W PL or Dulux S/E BATTERIES (1 year guarantee ) TYPE ODE DESRIPTION B936/ΗΤ60S Battery NiMH 4.8V/ 4Ah B970/ΗΤ B971/ΗΤ B972/ΗΤ B973/ΗΤ B974/HT Battery pack Nid 2.4V/ 1.5 Ah Battery pack Nid 2.4V/ 3 Ah Battery packnid 3.6V/ 1.5 Ah Battery pack Nid 4.8V/ 1.5 Ah Battery packnid 3.6V/ 4Ah Battery 12V/2,6Ah Battery Nid 3,6V/600mAh Battery Nid 1.2V/ 1.5Ah Sealed lead acid battery Pb 12V/ 7Ah Lead acid battery 6V/ 4Ah Lead acid battery Pb 12V/ 1.3Ah Lead acid battery Pb 24V/ 2Ah Lead acid battery Pb 12V/ 2Ah A925/HT A931/HT Battery 3.6V/600mAh NiMH HT (halogen free) Battery Nid 3,6V/1Ah ΗΤ with cable & connector (halogen free) A965/HT Battery 3.6V/1,5Ah NiMH HT (1200) (halogen free) A Lead acid battery 12V/ 33Ah A Lead acid battery 12V/ 55Ah B952/HT Battery 3,6V/2Ah NiMH HT (halogen free) B949/HT Battery Nid 3,6V/3Ah HT (halogen free) B974/HT Battery Nid 3,6V/4Ah HT (halogen free) 930/HT Battery 4,8V/1,2Ah NiMH (halogen free cable) AWG16 B954HT Battery 4,8V/2Ah NiMH ΗΤ (halogen free) B941/HT Battery Nid 4,8V/3Ah HT (halogen free) B979/HT Battery Nid 4,8V/4 h HT (halogen free) A Lead acid battery 12V/9Ah (halogen free) 149

151 AESSORIES / REPLAEMENTS AESSORIES / REPLAEMENTS 150 TYPE ODE DESRIPTION A82/Ni External decorative lag, nickel case A82/G/SQ A82/SL/SQ A External decorative lag, silverpink pearlescent case External decorative lag, gold case 40 cm Extension rod for Double Easy Light A Recess wall mounting base for fire alarm call points A632 A Recess mounting base Spray for testing the smoke detectors High voltage transformer for RT14, RT15 A1013 A1014 A Recess mounting base for Professional Light Double sided conversion diffuser for GR5XX (Double light) Recess mounting base for lassic Light A Double sided diffuser Weather Light A1018/PL A1020/PL A Recess mounting base for MLD28, DLD28 Recess mounting base for MLD34, DLD34 Recess mounting base for MLD44, DLD44 A Set for ceiling installation 20 cm for MLD / DLD A1025 A1026 A Set for ceiling installation 40 cm for MLD / DLD Set for ceiling installation 60 cm for MLD / DLD Set for ceil. instal. with chain up to 50 cm for Eco Light A1030 A Protective grid for RT3X for external use Glue board (12 pieces) for RT3X A Glue board(single sided) for RT22 (1 piece) A Glue board (double sided) for RT24 (1 piece) A Glue board 10 pcs. A Glue board(12 pieces) or Professional Deluxe A cm Ext. rod for Project LightLounge LightBox Light A A A cm Extension rod with ceiling eyelet for ProjectLounge 20 cm Extension rod for ProjectLounge Light 40 cm Extension rod for ProjectLounge Light onnection tie for ProjectLounge Light Plastic base for flag mounting (silver) for Project Light Plastic base for ceiling mounting (device terminal) A1083 A1084/SL A1085/SL A Metallic ceiling mounting rosette (device terminal) A1087/SL Plastic base for wall mounting (silver) for Project A Set accessories for installation for Project Light A Software for BSR1116 & USB cable A Accessory set used for hanging the Light Box on a ceiling A Software for BSR1156/N & USB cable 2000/W Set of right / left screw hiding cup for GR2000, white colour 2000/B Set of right / left screw hiding cup for GR2000, bronze colour A Software for BSR21xx & USB cable A Recess mounting base for Easy Light A Suspended ceiling mounting springs for Easy Light, SLD A eilling Bracket for GR9xx/xxL A Plastic double sided diffuser Weather Light GR19xx A9100/ST Plastic double sided diffuser for selftesting Weather Light GR19xx A Set of accessories for ceiling mounting (1m) (ZLD128134) A Set of accessories for ceiling mounting (0,5m) (ZLD128134) A Set of accessories for ceiling mounting 0,25m) (ZLD128134) A Accessory for vertical wall maunting (ZLD128134) AN Antenna 2.5m for WiDac2 Βase Base for movement detectors BS405 & BS409 ΒΟΧ Base for installing detectors in airducts BS818/T BS819/T BS818/R BS819/R GLASS Wireless transmitter for programmable room thermostat with batteries 2xAA Wireless transmitter for programmable room thermostat boiler with batteries 2xAA Wireless receiver for programmable room thermostat with batteries 2xAA Wireless receiver for programmable room thermostat boiler with batteries 2xAA Protective metallic grid for Professional Light Protective metallic grid for Global Light Protective metallic grid for lassic LIght Glass for BS7000

152