Job Name th Street-Controls Denver CO. Bid Date Feb 22, Submittal Date Feb 26, 2008

Transcription

1 Date: Feb 27, 2008 MH Lighting and Controls 1044 Speer lvd Denver Co Phone: (303) Fax: (303) Job Name Denver CO id Date Feb 22, 2008 Submittal Date Feb 26, 2008 Architect: David Owen Tryba 1620 Logan St. Denver CO Engineer: Hadji & Associates 1825 Lawrence Ste 200 Denver CO 80202

2

3 Date: Feb 27, 2008 Page 1/1 Transmittal MH Lighting and Controls 1044 Speer lvd Denver Co Phone: (303) From: Crystal Powell Project Location To Denver CO Dynalectric Co. 345 Sheridan lvd. Lakewood CO Contact: Martin St. Peter ATTACHED E AE SENDING OU 11 COPIES OF THE FOLLOING ITEMS: Drawings Specifications Other: Prints Plans X Submittals THESE AE TANSMITTED FO: Prior Approval esubmittal for Approval ecord X Approval Corrections ids due on: Approval as Submitted our Use Other: Approval as Noted eview and Comment Type MFG Part GLC-1 att Stopper LC-100 GLC-1 TS Panel Division HDLS8SS-7 LLC-1 TS Panel Division LIN24-G1-115 LLC-1 TS Panel Division LCV24S LLC-1 TS Panel Division LTU24 LLC-1 TS Panel Division HPSM115/277 LLC-1 TS Panel Division CHSTD250 LLC-1 TS Panel Division HLINKCC LLC-1 TS Panel Division HDLS8SS-*** Item Note: *- Specify Color LLC-1 TS Panel Division HDL4P LLC-1 TS Panel Division HDPS1CC LLC-1 TS Panel Division HPSA LLC-1 TS Panel Division HPSA-I att Stopper LS-101 att Stopper Z-100 att Stopper DT-355 CA-1 att Stopper DT-305 att Stopper P-100* Item Note: *- Specify Color att Stopper TS * att Stopper PI att Stopper E * Item Note: *- Specify Color att Stopper T-2255 Please review the attached submittals for approval. Please return one set of signed approvals back to my office with your orders. Feel free to call with any questions. Thank ou. FF00009 Page 1/1

4

5 Feb 27, 2008 Martin St. Peter Dynalectric Co. 345 Sheridan lvd. Lakewood CO E: Denver CO Dear Martin Type MFG Part GLC-1 att Stopper LC-100 GLC-1 TS Panel Division HDLS8SS-7 LLC-1 TS Panel Division LIN24-G1-115 LLC-1 TS Panel Division LCV24S LLC-1 TS Panel Division LTU24 LLC-1 TS Panel Division HPSM115/277 LLC-1 TS Panel Division CHSTD250 LLC-1 TS Panel Division HLINKCC LLC-1 TS Panel Division HDLS8SS-*** Item Note: *- Specify Color LLC-1 TS Panel Division HDL4P LLC-1 TS Panel Division HDPS1CC LLC-1 TS Panel Division HPSA LLC-1 TS Panel Division HPSA-I att Stopper LS-101 att Stopper Z-100 att Stopper DT-355 CA-1 att Stopper DT-305 att Stopper P-100* Item Note: *- Specify Color att Stopper TS * att Stopper PI att Stopper E * Item Note: *- Specify Color att Stopper T-2255 Please review the attached submittals for approval. Please return one set of signed approvals back to my office with your orders. Feel free to call with any questions. Thank ou. FF00010 Page 1/1

6

7 LC-100 GLC-1 P o w e r P a c k s LC-100 Intelligent Power Pack Two-relay output power pack that accepts signals from multiple control devices Dimming convenience with 0-10V ballasts Daylighting control with photosensor Load shed dimming or ON/OFF switching Dual voltage 120/277 VAC Tunes maximum light level output for greater energy savings potential POJECT LOCATION/TPE Product Overview Description The LC-100 is a power pack with two relay outputs and two dimming channels delivering both switching and 0-10V dimming control to lighting loads. Signal inputs offer integrated operation with a range of control devices. Operation A dual voltage device capable of operating at either 120 or 277V, the LC-100 installs as a standard power pack, connecting to junction boxes in a ceiling or a location close to controlled loads. ith 24VDC at 150mA available, it provides power to occupancy sensors, photocells, and other devices. Low voltage switch inputs give occupants ON/OFF switching and up/down dimming control of two independent lighting loads. Separate signaling inputs for occupancy sensors, time clocks and photocells allow shut-off and daylighting control while providing convenient scenarios (i.e., blink warning, manual on or auto on, hold on, on only) to meet control needs. Dimming Control hen used with 0-10V controllable ballasts, the LC-100 provides dimming and ON/OFF control of up to 100 ballasts per dimming channel. Occupants can conveniently dim up/down and turn lighting ON/OFF using momentary low voltage switches. The load shed feature dims lighting to preset levels during peak demand periods to reduce energy consumption. Lighting maximum levels can also be set for greater energy savings. Applications The LC-100 integrates control of other devices to meet room-specific lighting control needs. It is ideal for compliance with bi-level switching, daylighting and lighting shut off energy code provisions. here load shedding is needed, the LC-100 can switch off non-critical lighting while leaving other lighting on. Or with controllable ballasts, it can dim lighting down to preset load shed levels. Features Single package with relay outputs, dimming channels, power supply, and device inputs for simpler installation Two switch inputs accept three-wire momentary, two-wire momentary pushbutton, or maintained low voltage switches Hold-ON feature keeps lighting on during scheduled time, reverts to occupancy sensor control after hours urn in timer prevents lamps from dimming for initial 100 hours for extended lamp life Pilot light output for status annunciation at switches link warning five minutes prior to shutoff Isolated relay contact for each relay output provides status Manual ON/Auto ON settings for convenience and energy savings After hour override settable to 30 minutes, 1 hour, 2 hour or 4 hour orks with the LS-301 dimming photosensor to provide closed loop dimming control

8 Type 1 enclosure For operation within a Maximum Ambient of 60 C Acceptable for use in plenum Industrial Control Equipment 83AJ Designed and Manufactured in USA Configuration Switches Load Output ating 120/277VAC, 60Hz, 1hp 20Amp Tungsten or allast Auxiliary Output ating 1Amp, 24VDC LK Power HT Neutral GN Ground ED Output V allast ED Load & Line L Output 2 L Load & Line Shed Max Level Level Occupancy Sensor 24VDC Violet Gray Com 24VDC Sensor ON OFF 24VDC Shed Signal Shed Photocell Daylight Time Clock Unoccupied 24VDC LC-100 GLC-1 P o w e r P a c k s Specifications LC-100 Technical 120/277 VAC voltage input, 50/60 Hz Two relay outputs rated 20 Amp 120V tungsten and ballast, 20 Amp 277V ballast Two isolated NO/NC relays rated 1 24VDC NEMA 1 enclosure, Acceptable for use in plenum spaces Output power 24VDC with automatic overload protection Dual voltage input 120 or 14 atts maximum Switch wiring distances up to 1000 feet with 18 gauge wire Dimensions: 6.63" x 6.13" x 2.13" (168.4mm x 155.7mm x 54.1mm) with a 1/2 inch snap-in nipple UL and CUL listed; Five year warranty iring & Installation LC-100 iring Connections, Inputs, and to Dimming allasts LK Power HT Neutral OCC SNS GN Ground +24VDC ED Output 1 ED Load & Line COMMON L Output 2 L Load & Line LC-100 Terminals Sensor Input LUE ED LACK Photocell Input Junction box LC-100 line voltage wiring DALT +24VDC COMMON LUE ED LACK LC-100 Terminals LS-100 Model #: LC-100 Intelligent Power Pack 01627r1 1 link Disable 2 ON Only when occupied 3 Automatic ON 4 Dimming 5 Daylighting Enable 6 Time Override #1 7 Time Override # Hour urn In low voltage wiring Time Scheduled Occupancy Low voltage wiring low voltage wiring 0-10V ballast +24VDC UNOCC LC-100 Terminals Closed contacts signal nonoccupancy. Open contacts signal occupancy. low voltage switches LC-100 iring Connections O N OPEN OPEN Max light level and shed light level settings Configuration switches Switch Input 1 Switch Input 2 Status LEDs +24VDC SHED LC-100 Terminals Load Shed Load Shedding System Closed contacts signal load shed. Open contacts restore from load shed mode. Connection terminals switch inputs and channel outputs (typical of 2) Connection terminals for occupancy sensors, time clocks, etc Ordering Load atings Catalog No. Input Voltage allast (A) Incan (A) Motor (HP) Output LC /277 VAC; 50/60 Hz * 24 VDC; 150 ma** * 1 Hp rated at 120/250 VAC. ** Output is 150 ma with relays connected. Installation Notes att Stopper/Legrand Pub. No All att Stopper power packs should be installed in accordance with state, local, and national electrical codes and requirements. 2. Power packs are designed to attach to existing or new electrical enclosures with 1/2 inch knockouts. (Check electrical codes in your area.) 3. Low-voltage wiring should use stranded, AG, properly rated cable. Do not run low voltage Class 2 wiring with high voltage wiring. For plenum return ceilings use UL listed plenum-approved cables.

9 HDLS8SS-7 GLC-1 Smartwired Dataline Switch Smartwired control for single relays, groups of relays, and/or channels in SS control systems 1-, 2-, 4-button configuration in single-gang box, 8-button control in double-gang box acklit locator for visibility in darkened rooms User-friendly design with matching screwless wallplate and removable lens caps for labelling Durable Lexan plastic construction available in four colors FCC approved for commercial/industrial applications One year warranty Component Operation & Features Applications Designed for use with The att Stopper Smartwired Switching System (SS), the Dataline Switch (HDLSxSS-x) offers flexible and user-friendly lighting control via 1-, 2-, 4-, or 8-button units. The switch connects to a panel via the SS dataline. Each switch button may be individually programmed ( smartwired ) to control a single relay, group of relays, any channel within a single panel, or the same channel among a network of panels. Easy installation and efficient, simple control in an architecturally pleasing design makes the switch ideal for any building space. Users can install Dataline Switches into standard wall boxes and daisy chain switches together on the system dataline, eliminating the need for costly home run wiring. Each switch unit contains one master button as well as up to eight individual switch buttons. The master button can be programmed with a choice of functions including ESTOE/All OFF (the default setting), or All OFF, All ON/All OFF, or disabled options. Adjacent to each of the individual buttons is a bi-color status LED. Users program the individual switch buttons by lifting the switch cover and performing an easy sequence of steps (the master button is programmed via DIP switches on the back of the switch). Dataline Switches offer an array of user-friendly features, including matching screwless wallplates and removable lens caps for ease in labelling individual switch buttons. SS Dataline Switches offer flexibility to building owners by accommodating the needs of specific occupants while facilitating efficient, area-wide automated lighting control. In addition to the control scenarios available with the SS system, users can take advantage of the Dataline Switch s cleaning scenario that enables maintenance crews servicing building areas to control the necessary lighting without interfering with the lighting needs of workers staying after hours. Since the switches are easy to configure, building owners and operators can reconfigure lighting control functions as the use of a particular area changes without costly retrofits, the need for a PC, or additional wiring. Dataline Switches are ideal for use in commercial office buildings and any building space where individual occupant lighting control needs are paramount.

10 HDLS8SS-7 GLC-1 Dataline Switch Technical Specifications Ordering Units in 1-,2-,4-, or 8-button configurations Standard wallbox mounting (1-gang for 1-, 2-, or 4-button switches, 2-gang for 8-button switch) 24 VAC from panel or accessory box orks with SS panels and systems Optional cleaning control scenario emovable lens caps for each switch button accommodating 3/8 (9 mm) laminated tape i-color status LEDs for each button (red= All ON, green= mixed state, no color = All OFF) Locator LED Optional key lock version Master button with programmable optional configurations Dimensions: 2 3/4 x 4 1/2 H x 1 13/16 D for 1-,2-, and 4-button switch. 4 1/2 x 4 1/2 H x 1 13/16 D for 8-button switch One year warranty Catalog No. Description Size HDLS1SS Single Dataline Switch Single-gang HDLS2SS Dual Dataline Switch (two individual buttons plus Master button) Single-gang HDLS4SS Quad Dataline Switch (four individual buttons plus Master button) Single-gang HDLS8SS Octal Dataline Switch (eight individual buttons plus Master button) Double-gang Add to the end of catalog no.: - 2 for Ivory, - 4 for Almond, - 7 for hite, - 9 for Grey. Add -K after catalog no. for keyed switch. Switch Layout & iring SS System with Dataline Switches Global dataline Dataline Switch iring SS Panel 01 SS SS Panel Panel ed lack hite lue Communication 24VAC Local dataline 4-wire dataline (18 AG unshielded copper conductors in 2 independent twisted pairs) Switch Programming Programming Dataline Switches Press Smartwire tab once 1 Smartwire LED flashes once All switch button LEDs begin flashing 2 Press switch button to be programmed Selected button LED continues to flash Other LEDs stop flashing 3 Press relay control button to add or delete from group Press Smartwire tab again 4 All LEDs stop flashing Flashing LED elay control button Smartwire tab Smartwire LED The att Stopper, Inc. Pub. No

11 LIN24-G1-115 LLC-1 Lighting Integrator Panel Interiors LIGHTING CONTOL PANELS System & Enclosures Universal power supply with international options DIN rail mounting for automation modules or other Class 2 devices Product Overview Features Description att Stopper/Legrand s Lighting Integrator (LI) Panel Interiors provide mounting for the systems single pole relays, power supply and control cards. The interior is shipped as a separate assembly from the panel tub and cover to facilitate project rough-in requirements. Interiors are configured as 8, 24 or 48 relay capacity with the quantity of relays installed as called for on the order. The interior field mounts into an appropriate enclosure supplied separately. Operation The relays are driven into a latched on or off state through a 24 volt DC pulse generated by the relay driver cards. A momentary pushbutton is provided for each relay driver circuit that will manually force the relay to toggle it s state with each press of the button. An isolated set of contacts in the relays provide a positive status feedback to the relay driver circuits which is annunciated by an LED associated with each relay. emovable terminal blocks associated with each relay driver circuit Separate enclosure and panel interior facilitate rough-in and installation Panel interior provides complete isolation between line and Class 2 voltages Individual plug-in, latching style single pole relays with isolated pilot contacts Factory configured for any quantity of relays up to 48 max Power supply options for 115/277 volts, 115/347 volts and 220 volts 50Hz POJECT LOCATION/TPE Operation cont d. Applications Individual plug-in latching relays with isolated pilot status contacts and mechanical override Group switch card for unique Smartwire pushbutton programming allow connection of direct wired low voltage switches or other devices for remote control of the relays. Switch inputs can be wired to accommodate either momentary three wire, momentary two wire (toggle) or maintained contact switches as well as occupancy sensors. The switch input circuits are auto sensing and will automatically configure appropriately when att Stopper occupancy sensors are connected to the inputs. Lighting Integrator panel interiors can be supplied configured to suite a wide range of lighting control applications. Interiors are compatible with enclosure options for surface or flush mounted interior applications, as well as, NEMA 3 and 4 exterior applications. Lighting integrator is suitable for both new construction and retrofit applications. Push button override, pilot light signal and status LED provided for each relay Panel provides low voltage power source for occupancy sensors and daylighting controls DIN rail(s) provided for mounting Class 2 modules and accessories Two slots provided for factory installed automation, networking and integration control cards

12 LIN24-G1-115 LLC-1 Specifications Panel Interior Dimensions Interiors available as 8, 24 or 48 relay capacity elays are factory installed and tested in user selectable quantity per interior elay driver circuit cards provide support for 4 relays and includes manual pushbutton override, LED relay status indicator and removable switch input terminal block per relay Group switching card provides Smartwire (pushbutton programming) capability for assigning relays to groups or patterns Eight channels provided per group switch card, includes override/programming pushbuttons, pattern button and status LED per channel All relay and channel switch inputs are configurable for three wire momentary, two wire momentary, maintained contact or occupancy sensor input Group switching card Interior frame an voltage barrier Plug-in relays Dataline power supply card position Line voltage transformer assembly Class 2 power supply card Interior supports one or two factory installed control/automation cards DIN rails supplied in Class 2 section of interior for mounting optional automation modules or other devices Accessory power available: - 8 relay interior, VAC or VDC - 24 and 48 relay interior, VAC or 800 Pilot light output, 24 V rectified or 24 VAC, other voltages configurable with external power supply UL listed, One year warranty sensor input Mechanical override switch on relay elay driver cards DIN ail for mounting modules Networking card positions LIGHTING CONTOL PANELS Panel Interior Configurations Mounting holes; typical 4x System & Enclosures Ordering Pub. No Catalog No. Description Shipping eight LIN8-G1-115 LIN8-G1-347 LIN8-G1-240 LIN24-G1-115 LIN24-G1-347 LIN24-G1-240 Panel interior, max 8 relays, 115/277 VAC 60Hz power supply Panel interior, max 8 relays, 115/347 VAC 60Hz power supply Panel interior, max 8 relays, 240 VAC 50Hz power supply Panel interior, max 24 relays, 115/277 VAC 60Hz power supply Panel interior, max 24 relays, 115/347 VAC 60Hz power supply Panel interior, max 24 relays, 240 VAC 50Hz power supply 13 Lbs. 13 Lbs. 13 Lbs. 31 Lbs. 31 Lbs. 31 Lbs. LIN48-G1-115 Panel interior, max 48 relays, 115/277 VAC 60Hz power supply 44 Lbs. LIN48-G1-347 Panel interior, max 48 relays, 115/347 VAC 60Hz power supply 44 Lbs. LIN48-G1-240 Panel interior, max 48 relays, 240 VAC 50Hz power supply 44 Lbs.

13 LCV24S LLC-1 L i g h t i n g C o n t r o l P a n e l s Lighting Integrator Enclosures and Covers Three sizes of enclosures available ecessed latch with lockable, removable hinged cover NEMA 1, NEMA 3 or NEMA 4 ratings Surface or flush mounting, screw cover DIN rail available on 24, 48 capacity enclosures UL and CUL listed POJECT LOCATION/TPE Product Overview Specifications Description Enclosures (LTU) and covers (LCV) are designed to enclose att Stopper/Legrand Lighting Integrator lighting (LI) control panels. Enclosures hold the panel interior assembly. Hinged, latching, lockable covers are available for either surface or flush mount applications. The 24 and 48 relay capacity enclosures are available with DIN rail for mounting contactors and other accessory components. Sizes Enclosures and covers come in three sizes for Lighting Integrator. These are 8-, 24-, and 48-relay capacity. The larger sized enclosures (24- and 48- relay) with optional DIN rail for mounting up to six 4-pole contactors. NEMA 3 and 4 enclosures are surface mount with integral covers (not separately orderable). NEMA 1 enclosures and covers are ordered separately. Enclosure size must match cover size. Although ordinarily included as part of an LI panel order, enclosures and covers may be ordered separately by catalog number. 16 gauge all steel enclosures with galvineal finish (NEMA 1), painted finishes (NEMA 3, 4) Surface or flush mount, with back mounting holes and threaded holes for cover mounting screws ecessed latch with lockable, removable hinged cover Modularity Lighting Integrator s modularity enables the enclosure to be mounted in the early stages of construction, facilitating conduit installation and rough-in wiring. Later, the interior assembly containing the relays, electronics, power supply and termination blocks simply slides into the enclosure. At that point, lighting circuits and low voltage control wiring can be terminated and the enclosure cover installed. NEMA atings Enclosures and covers are available in three NEMA ratings. NEMA 1 rated is suitable for dry indoor locations (i.e., electrical rooms or closets). NEMA 3 rated enclosures are intended for outdoor use, and provide a degree of protection against falling rain and sleet, as well as withstanding ice that may form on the enclosure. NEMA 4 rated enclosures are intended for indoor or outdoor use primarily to provide a degree of protection against windblown dust and rain, splashing water, and hose-directed water, as well as withstanding ice that may form on the enclosure. DIN rail for six contactors standard on 24 and 48 relay capacity enclosures Covers are ANSI 61 gray painted finish NEMA 1, NEMA 3, or NEMA 4 ratings UL and CUL listed One year warranty

14 LCV24S LLC-1 L i g h t i n g C o n t r o l P a n e l s Enclosure Dimensions Enclosures/Covers Technical LTU8 16.5" 4.82" 11.68" 4.94" LTU " 14" 4.94" Line voltage section Low voltage 15.08" section 13.58" 14.5" Line voltage section Low voltage section Line voltage section 26" LTU " 8.04" 16" 4.94" 14" 4.94" 35.8" Line voltage section Low voltage section Line voltage section 40.5" 8.08" 16" Ordering Catalog No. Description Dimensions (HxxD) eight LTU8y Enclosure, LI panel 8 relay capacity x 16.5 x lbs LTU24y Enclosure, LI panel 24 relay capacity x x lbs LTU48y Enclosure, LI panel 48 relay capacity x x lbs LCV8S NEMA 1 surface cover, LI panel 8 relay capacity x x.75 7 lbs LCV8F NEMA 1 flush cover, LI panel 8 relay capacity x lbs LCV24S NEMA 1 surface cover, LI panel 24 relay capacity x x lbs LCV24F NEMA 1 flush cover, LI panel 24 relay capacity x lbs LCV48S NEMA 1 surface cover, LI panel 48 relay capacity x x lbs LCV48F NEMA 1 flush cover, LI panel 48 relay capacity x lbs x = S (surface mount), F (flush mount) y = blank (NEMA 1 (default)), S3 (NEMA 3, S4 (NEMA 4) NOTE: Photos and dimensions given for NEMA1 enclosures only. att Stopper/Legrand Pub. No

15 LTU24 LLC-1 L i g h t i n g C o n t r o l P a n e l s Lighting Integrator Enclosures and Covers Three sizes of enclosures available ecessed latch with lockable, removable hinged cover NEMA 1, NEMA 3 or NEMA 4 ratings Surface or flush mounting, screw cover DIN rail available on 24, 48 capacity enclosures UL and CUL listed POJECT LOCATION/TPE Product Overview Specifications Description Enclosures (LTU) and covers (LCV) are designed to enclose att Stopper/Legrand Lighting Integrator lighting (LI) control panels. Enclosures hold the panel interior assembly. Hinged, latching, lockable covers are available for either surface or flush mount applications. The 24 and 48 relay capacity enclosures are available with DIN rail for mounting contactors and other accessory components. Sizes Enclosures and covers come in three sizes for Lighting Integrator. These are 8-, 24-, and 48-relay capacity. The larger sized enclosures (24- and 48- relay) with optional DIN rail for mounting up to six 4-pole contactors. NEMA 3 and 4 enclosures are surface mount with integral covers (not separately orderable). NEMA 1 enclosures and covers are ordered separately. Enclosure size must match cover size. Although ordinarily included as part of an LI panel order, enclosures and covers may be ordered separately by catalog number. 16 gauge all steel enclosures with galvineal finish (NEMA 1), painted finishes (NEMA 3, 4) Surface or flush mount, with back mounting holes and threaded holes for cover mounting screws ecessed latch with lockable, removable hinged cover Modularity Lighting Integrator s modularity enables the enclosure to be mounted in the early stages of construction, facilitating conduit installation and rough-in wiring. Later, the interior assembly containing the relays, electronics, power supply and termination blocks simply slides into the enclosure. At that point, lighting circuits and low voltage control wiring can be terminated and the enclosure cover installed. NEMA atings Enclosures and covers are available in three NEMA ratings. NEMA 1 rated is suitable for dry indoor locations (i.e., electrical rooms or closets). NEMA 3 rated enclosures are intended for outdoor use, and provide a degree of protection against falling rain and sleet, as well as withstanding ice that may form on the enclosure. NEMA 4 rated enclosures are intended for indoor or outdoor use primarily to provide a degree of protection against windblown dust and rain, splashing water, and hose-directed water, as well as withstanding ice that may form on the enclosure. DIN rail for six contactors standard on 24 and 48 relay capacity enclosures Covers are ANSI 61 gray painted finish NEMA 1, NEMA 3, or NEMA 4 ratings UL and CUL listed One year warranty

16 LTU24 LLC-1 L i g h t i n g C o n t r o l P a n e l s Enclosure Dimensions Enclosures/Covers Technical LTU8 16.5" 4.82" 11.68" 4.94" LTU " 14" 4.94" Line voltage section Low voltage 15.08" section 13.58" 14.5" Line voltage section Low voltage section Line voltage section 26" LTU " 8.04" 16" 4.94" 14" 4.94" 35.8" Line voltage section Low voltage section Line voltage section 40.5" 8.08" 16" Ordering Catalog No. Description Dimensions (HxxD) eight LTU8y Enclosure, LI panel 8 relay capacity x 16.5 x lbs LTU24y Enclosure, LI panel 24 relay capacity x x lbs LTU48y Enclosure, LI panel 48 relay capacity x x lbs LCV8S NEMA 1 surface cover, LI panel 8 relay capacity x x.75 7 lbs LCV8F NEMA 1 flush cover, LI panel 8 relay capacity x lbs LCV24S NEMA 1 surface cover, LI panel 24 relay capacity x x lbs LCV24F NEMA 1 flush cover, LI panel 24 relay capacity x lbs LCV48S NEMA 1 surface cover, LI panel 48 relay capacity x x lbs LCV48F NEMA 1 flush cover, LI panel 48 relay capacity x lbs x = S (surface mount), F (flush mount) y = blank (NEMA 1 (default)), S3 (NEMA 3, S4 (NEMA 4) NOTE: Photos and dimensions given for NEMA1 enclosures only. att Stopper/Legrand Pub. No

17 GND NEU HPSM115/277 LLC-1 Power Supply Provides 24 VAC to system panels and components Single unit for either 115 and 277 input voltages Functions with either 50 or 60 Hz Internal overcurrent protection Voltage spike protection Two separate Class 2 40 VA transformers UL listed, one year warranty Component Operation & Features The HPSM115/277 is the power supply unit for The att Stopper relay panels. Installed in a relay panel interior, it provides 24 VAC operating voltage to system components such as electronics, relays, and accessories. It operates with either 115 or 277 voltages and will function with either 50 or 60 Hz. The Power Supply contains two 40 VA transformers to provide a stable power source for the panel, ensuring an adequate supply for relays and any user-installed accessories that draw power from the panel. In addition, these transformers feature internal overcurrent protection so that they will automatically shut off if overloading occurs. The Power Supply features voltage spike protection of all downstream electronics via Metal Oxide Varistors (MOV). Ordering Catalog No. Description Voltage HPSM115/277 Power Supply 115 or 277 Add -A after catalog number for ACP-Net panels iring & Installation Power Supply Unit for elay Panels Dual transformers Installing the Power Supply GND NEU ack view Front view The Power Supply includes dual transformers for a stable power source. The Power Supply easily installs into the line voltage section of any relay panel interior. Pub. No

18

19 CHSTD250 LLC-1 L i g h t i n g C o n t r o l P a n e l s incontrol Software for Lighting Integrator indows-based control and automation for Lighting Integrator panels System management and administration Panel programming off- or on-line Design, layout and document lighting control projects Activity logs and reports Simulator function for testing programming POJECT LOCATION/TPE Product Overview Features Description incontrol software provides PC-based automation and control for att Stopper Lighting Integrator (LI) panels equipped with Communication cards. It includes a design program, incontrol Designer, to layout and document lighting control projects and produce CAD-ready diagrams in DXF format. Operation incontrol provides a user interface for programming, monitoring and control functions for LI panel networks. Administrators can use the software to program control schedules off-line, and then execute updates with a simple command. Once programmed using incontrol, the panels execute control scenarios, including scheduled OFF with blink warning, time delay overrides with blink warning, or automatic daylight switching with occupant interlock/ override. Administrators can configure password-protected security settings to specify users with authority to change programming, documentation, and execute control functions. Online operation enables users to control individual relays or make immediate changes to scheduled operation. Explorer-like view of all system components emote operation capabilities via modem, network, or TCP/IP connection Design export to DXF format with output including single line riser diagram, panel schedules, and specification summary User programmable override and time delays System eports and Analysis incontrol provides comprehensive monitoring and reporting capabilities, including reports for documenting control system devices and schedules. In addition, incontrol generates activity logs, exception reports and runtime graphs that can be used for trend analysis, or to track actual lighting usage (down to the individual relay level, if desired) and evaluate energy costs. The software can also be used to verify that the system is operating as intended, or to identify and diagnose potential concerns. Applications Facilities with multiple LI panels, such as office building campuses, convention centers, airports, arenas, and large commercial facilities are ideal settings for lighting control management via incontrol. Capable of automating and controlling all types of interior and exterior lighting applications, incontrol is also adept at administration down to the relay level. Operators can tailor lighting control to building and occupant activities on a daily or weekly basis with programmable holiday and exception schedule handling. eekly scheduling with holidays and astronomic control Compatible with eblink for use on an IP network Designer wizard for creating lighting control project layouts Optional incontrol Graphics offers customized, graphical control capabilities

20 CHSTD250 LLC-1 L i g h t i n g C o n t r o l P a n e l s Specifications incontrol Technical Compatible with indows 2000, XP Professional PC required with 256 M AM, CD-OM, 100 M free hard disk space Monitor with 16-bit color, minimum 800x600 resolution Data Communications Link (HLINKCC) required to connect PC to LI panel network Sample incontrol Screens and eports Users can select reports from a browserlike screen. Users set up weekly schedules, modify daily events, and specify actions for weekends and holidays on this scheduling screen. eal time load report graph provides administrator with a snapshot of lighting system usage. Monitoring and trend analysis are enabled by reports such as these runtime and runtime exception reports. Documenting, programming and controlling panel relays is simplified with point and click screens and drop down menus. Ordering Catalog No. Description CHSTD-xxx incontrol software (standard package) xxx at end of catalog no. = number of relays in system (i.e., 250, 500, 750 or UL for unlimited number of relays). att Stopper/Legrand Pub. No Additional networking components: HLINKCC Data Communications Link (required for PC connection to LI dataline) Optional software packages include: CHG incontrol Graphics Software

21 HLINKCC LLC-1 L i g h t i n g C o n t r o l P a n e l s Lighting Integrator Data Communications Link PC connection to a Lighting Integrator panel network Industry standard S 232 connection Alarm contacts Clock synchronization LED status indicators POJECT LOCATION/TPE Product Overview Description The Data Communications Link (HLINKCC) provides the connection between a PC and a Lighting Integrator (LI) network outfitted with Communication cards. It enables PCs running incontrol software to communicate to multiple panels linked together. Operation The Data Communications Link interfaces PCs with the panel network. It connects at any point on the shielded, twisted pair communications wire. The device enables all the lighting control panels in a LI system to be programmed and monitored from a computer using incontrol software. It also provides notification of failed field devices or relays, including a failure in the Data Communications Link itself via an LED and a set of relay contacts. The Data Communications Link is connected to a PC using the cable (HCALE-C). Networking The Data Communication Link enables PC control and automation of networked LI panels. Multiple units can be used on an LI panel network to provide multiple operator stations or as portals to other building control systems. Administrators may select from additional networking options. For remote access via telephone lines, the LI modem option (HMODEM) may be selected, which connects to the Data Communications Link. For single user access to the Data Communications Link via a local area network using a standard Ethernet connection, the TCP/IP Connectivity Module (HLANCC) is available. If multi-user access to the panel network is desired via TCP/IP or the internet, the eblink appliance (L-ASE) can be added. Features System synchronization clock with automatic daylight savings and leap year adjustment Alarm contacts and LEDs to annunciate failed devices LED status indicators for power, online, and data activity Terminals for connection to global dataline

22 HLINKCC LLC-1 L i g h t i n g C o n t r o l P a n e l s Specifications Data Link Technical S232 serial communications port 300/1200/2400/4800/9600/19200 auto baud Alarm contacts rated at 28 VDC and 2 ma maximum 115 VAC plug-in transformer power supply Shipping weight: 3 lbs. (1.36 kg.) UL and CUL listed One year warranty System Layout Networked System Layout S 232 HCALE-C Cable Communication Card Communication Card Data Communications Link Lighting Integrator Panel (01) First Floor Lighting Integrator Panel (02) Second Floor Other panels Shielded single twisted pair data communications wire (HDL2) LI panel network using communication card with PC connection via Data Communications Link Other panels Networking Options Data Communication Link Applications S 232 HCALE-C Cable Data Communications Link To panels Shielded single twisted pair data communications wire (HDL2) Communications components for single-user connections. Ethernet L-ASE eblink option S 232 HCALE-C Cable Data Communications Link To panels Shielded single twisted pair data communications wire (HDL2) Communications components for multi-user LAN, AN or internet connections Ordering Catalog No. Description HLINKCC Data Communications Link with 115V power supply Additional networking components and options: HMODEM LI Modem HCALE-M S 232 Modem Connection Cable HLANCC TCP/IP Connectivity Module L-ASE eblink Appliance HDL2 Shielded single twisted pair data communications wire CHSTD-xxx incontrol software att Stopper/Legrand Pub. No

23 HDLS8SS-*** *- Specify Color LLC-1 Smartwired Dataline Switch Smartwired control for single relays, groups of relays, and/or channels in SS control systems 1-, 2-, 4-button configuration in single-gang box, 8-button control in double-gang box acklit locator for visibility in darkened rooms User-friendly design with matching screwless wallplate and removable lens caps for labelling Durable Lexan plastic construction available in four colors FCC approved for commercial/industrial applications One year warranty Component Operation & Features Applications Designed for use with The att Stopper Smartwired Switching System (SS), the Dataline Switch (HDLSxSS-x) offers flexible and user-friendly lighting control via 1-, 2-, 4-, or 8-button units. The switch connects to a panel via the SS dataline. Each switch button may be individually programmed ( smartwired ) to control a single relay, group of relays, any channel within a single panel, or the same channel among a network of panels. Easy installation and efficient, simple control in an architecturally pleasing design makes the switch ideal for any building space. Users can install Dataline Switches into standard wall boxes and daisy chain switches together on the system dataline, eliminating the need for costly home run wiring. Each switch unit contains one master button as well as up to eight individual switch buttons. The master button can be programmed with a choice of functions including ESTOE/All OFF (the default setting), or All OFF, All ON/All OFF, or disabled options. Adjacent to each of the individual buttons is a bi-color status LED. Users program the individual switch buttons by lifting the switch cover and performing an easy sequence of steps (the master button is programmed via DIP switches on the back of the switch). Dataline Switches offer an array of user-friendly features, including matching screwless wallplates and removable lens caps for ease in labelling individual switch buttons. SS Dataline Switches offer flexibility to building owners by accommodating the needs of specific occupants while facilitating efficient, area-wide automated lighting control. In addition to the control scenarios available with the SS system, users can take advantage of the Dataline Switch s cleaning scenario that enables maintenance crews servicing building areas to control the necessary lighting without interfering with the lighting needs of workers staying after hours. Since the switches are easy to configure, building owners and operators can reconfigure lighting control functions as the use of a particular area changes without costly retrofits, the need for a PC, or additional wiring. Dataline Switches are ideal for use in commercial office buildings and any building space where individual occupant lighting control needs are paramount.

24 HDLS8SS-*** *- Specify Color LLC-1 Dataline Switch Technical Specifications Ordering Units in 1-,2-,4-, or 8-button configurations Standard wallbox mounting (1-gang for 1-, 2-, or 4-button switches, 2-gang for 8-button switch) 24 VAC from panel or accessory box orks with SS panels and systems Optional cleaning control scenario emovable lens caps for each switch button accommodating 3/8 (9 mm) laminated tape i-color status LEDs for each button (red= All ON, green= mixed state, no color = All OFF) Locator LED Optional key lock version Master button with programmable optional configurations Dimensions: 2 3/4 x 4 1/2 H x 1 13/16 D for 1-,2-, and 4-button switch. 4 1/2 x 4 1/2 H x 1 13/16 D for 8-button switch One year warranty Catalog No. Description Size HDLS1SS Single Dataline Switch Single-gang HDLS2SS Dual Dataline Switch (two individual buttons plus Master button) Single-gang HDLS4SS Quad Dataline Switch (four individual buttons plus Master button) Single-gang HDLS8SS Octal Dataline Switch (eight individual buttons plus Master button) Double-gang Add to the end of catalog no.: - 2 for Ivory, - 4 for Almond, - 7 for hite, - 9 for Grey. Add -K after catalog no. for keyed switch. ***- Specify Color Switch Layout & iring SS System with Dataline Switches Global dataline Dataline Switch iring SS Panel 01 SS SS Panel Panel ed lack hite lue Communication 24VAC Local dataline 4-wire dataline (18 AG unshielded copper conductors in 2 independent twisted pairs) Switch Programming Programming Dataline Switches Press Smartwire tab once 1 Smartwire LED flashes once All switch button LEDs begin flashing 2 Press switch button to be programmed Selected button LED continues to flash Other LEDs stop flashing 3 Press relay control button to add or delete from group Press Smartwire tab again 4 All LEDs stop flashing Flashing LED elay control button Smartwire tab Smartwire LED The att Stopper, Inc. Pub. No

25 HDL4P LLC-1 Smartwired Dataline Two twisted pairs of 18 AG, copper stranded wires Color: red/black pair (data); blue/white pair (power); blue/white outer jacket Pairs: 1 twist per 2 inches (2 inch lay); cable: 1 twist per 6 inches (6 inch lay) Capacitance: 30 pf/foot max Jacketed, class II wire Total dataline length is 1500 feet; additional length available by using N-100 repeater ire marked in one foot increments UL and CUL listed, one year warranty ATT STOPPE CMP/CL3P 18 AG 2 PS UNSHIELDED (UL) Component asic Operation iring Guidelines ecommended Use Ordering Smartwired dataline wire is the communication wire used by The att Stopper s Smartwired lighting control panel system. Dataline quality is critical to ensuring trouble-free start-up and operation of the Smartwired lighting control system. Using proper dataline wire and following recommended installation practices ensures reliable communication and operation. The Smartwired dataline wire provides the communication pathway between individual panels and Dataline Switches (the local dataline) or between panels in a networked system of panels (the global dataline). The dataline can support up to 64 intelligent devices in a single network. Maximum dataline length for both local and global combined cannot exceed 1500 feet. Use Network epeater (N-100) if longer distances are needed or more devices are required. hen installing the dataline, the following practices must be observed: Dataline may be run in series, parallel, loop or star topology. Dataline wire must not be placed in conduit with conductors carrying high voltage. Mixing high and low voltage wiring is a violation of the National Electrical Code. It is recommended that the Smartwired dataline be run separately. unning the dataline with other equipment signal wiring may cause interference with other equipment. Smartwired dataline wire provides the best performance for Smartwired system communication. The att Stopper recommends use of Smartwired dataline wire to avoid communication problems that can be expensive and time consuming to diagnose and correct. Smartwired dataline wire is color coded to match the Smartwired lighting control system termination markings. Use of an alternate wire must be in strict accordance with Smartwired dataline wire specifications and wiring guidelines. Catalog No. Description Color Code Max. Diameter HDL4* SS Dataline ire ed/lack (data); lue/hite (power) *Add -P after catalog number on HDL4 for plenum rated cable; order in single foot increments. Global (Panel-To-Panel) Dataline Dataline Switches Local Dataline SS Panel SS Panel SS Panel Pub. No

26

27 HDPS1CC LLC-1 L i g h t i n g C o n t r o l P a n e l s Lighting Integrator Dataline Power Supply Powers up to 4000 feet of dataline and up to 500 Lighting Integrator panels Slots for up to three networking option cards Surface mounted, hinged cover with locking latch POJECT LOCATION/TPE Product Overview Description The Dataline Power Supply & Network Options Module (HDPS1CC) is designed for use with Lighting Integrator (LI) panels equipped with communication cards. Also referred to as the Dataline Power Supply, it powers the LI system dataline and provides an options panel for further enhancements. Specifications Pre-assembled in tub and cover 115 VAC power supply Dimensions: 12 H x 17.5 x 5.25 D (304.8mm x 444.5mm x 133.4mm) One year warranty UL and CUL listed Operation Using a 115 volt power supply for system power, the module provides power for up to 4,000 feet of system dataline (without dataline repeater) and can support up to 500 LI panels. Containing slots for networking options cards, each module can accommodate up to two Global Switch Annunciator cards and one Telephone Override card. hile only a single module is required for a networked system of LI panels, multiple modules can be included in a system to provide for the desired number of networking options cards. System Layout Lighting Integrator System with Dataline Power Supply Dataline Power Supply and Network Options Module To Lighting Integrator panels Ordering 115 VAC Dataline wire Dataline repeater Dataline Link Catalog No. Description Cable HDPS1CC Dataline Power Supply Module Pub. No

28

29 HPSA LLC-1 Lighting Integrator Analog Photocell LIGHTING CONTOL PANELS System & Enclosures Color-coded Class 2 connection to panel Product Overview All adjustments made from incontrol software Description Analog series photocells provide ambient light level measurements to Lighting Integrator Complete Control (LICC) panels, enabling flexible, multi-setpoint control of lighting. The outdoor model, HPSA, is completely weatherproof and equipped with a hooded lens to help protect against snow and glare. Indoor models include the HPSA-S for mounting in skylights, clearstories and atriums, and the HPSA-I, which is ideal for daylight shed applications and is mounted on the ceiling or wall. Applications Outdoor model HPSA is typically mounted on the building roof facing north. The HPSA provides exterior ambient light level information to the LICC panel where one or more setpoints have been appointed to control exterior lighting. The skylight model HPSA-S is designed to be compatible with the high light levels encountered near the glass in skylights, atriums and clearstories. Typically, the HPSA-S will provide light level information to the panel and be used to hold off/shed unnecessary interior lighting during bright daylight hours. The HPSA-I is also used to shed interior lighting in response to daylight, but is designed to operate in the relatively low ambient light levels present at the ceiling in interior rooms. POJECT LOCATION/TPE California Title 24 Compliant Calibration is remote from the sensor Three application-specific models for easy selection Operation Analog series photocells are powered by Class 2 DC voltage supplied from any input terminal on a Group Switching card installed in an LICC panel. The photocells return a DC signal to the panel in proportion to the amount of light striking the photocell lens. No adjustments are needed at the photocell head. Powerful incontrol software normalizes the photocell signal and provides an easy user interface, permitting set-up of lighting control scenarios based on footcandle level setpoints. Two modes allow for basic applications where default settings produce the desired control. An advanced mode allows the setpoints, time delays and deadband to be fine-tuned for more sophisticated application requirements. Typical Advanced Mode incontrol Software Screen Features Exterior and skylight models provide flexible mounting options via ½ threaded conduit fitting No calibration or adjustments required at the photocell location; all set-up done in software Interior model mounts simply, without tools, using the provided peel and stick adhesive Color-coded flying leads and matching colorcoded terminals in panel simplify installation

30 HPSA LLC-1 Specifications Application Diagrams Calibration: none (controlled by system software) Input Voltage: 12VDC Sensor Output: VDC Peak Current: 4.5 ma maximum Slew ate: One minute full scale response time ire Color Code: ed: +12VDC lack: 0-4.4VDC signal to panel hite: DC common HPSA Outdoor iring Sensor Hood HPSA Sensor North #20 AG up to 250 feet #18 AG up to 1000 feet Class 2 wiring HPSA-I Indoor iring Group Switching Card inside LI Panel iring Terminals atertight J ox A C D E F G H indow Ceiling HPSA-I Sensor Located half way between window and first row of lights Operating Tempature: -40 F-140 F (-40 C- 60 C) Mounting: HPSA and HPSA-S: ½ NPT x.69 stem HPSA-I : 0.5 x.64 stem with 3M adhesive pad Housing: UV stabilized plastic Dimensions: HPSA: 2.25 x 1.28 diameter HPSA-I: 1.23 x 2.00 diameter HPSA-S: 2.25 x 1.28 diameter HPSA-S Skylight iring Light Fixture #20 AG up to 250 feet Class 2 wiring HPSA-S Sensor Skylight ell Group Switching Card inside LI Panel iring Terminals Group Switching Card inside LI Panel iring Terminals A C D E F G H Vertical Orientation Option A C D E F G H #20 AG up to 250 feet Class 2 wiring LIGHTING CONTOL PANELS System & Enclosures Ordering Catalog No. Description Application ange HPSA HPSA-I HPSA-S Outdoor analog photocell sensor, white housing Indoor analog photocell sensor, white housing Skylight analog photocell sensor, white housing FC FC FC NOTE: May be ordered with custom calibration by adding suffix "X" and stating desired range. Pub. No

31 HPSA-I LLC-1 Lighting Integrator Analog Photocell LIGHTING CONTOL PANELS System & Enclosures Color-coded Class 2 connection to panel Product Overview All adjustments made from incontrol software Description Analog series photocells provide ambient light level measurements to Lighting Integrator Complete Control (LICC) panels, enabling flexible, multi-setpoint control of lighting. The outdoor model, HPSA, is completely weatherproof and equipped with a hooded lens to help protect against snow and glare. Indoor models include the HPSA-S for mounting in skylights, clearstories and atriums, and the HPSA-I, which is ideal for daylight shed applications and is mounted on the ceiling or wall. Applications Outdoor model HPSA is typically mounted on the building roof facing north. The HPSA provides exterior ambient light level information to the LICC panel where one or more setpoints have been appointed to control exterior lighting. The skylight model HPSA-S is designed to be compatible with the high light levels encountered near the glass in skylights, atriums and clearstories. Typically, the HPSA-S will provide light level information to the panel and be used to hold off/shed unnecessary interior lighting during bright daylight hours. The HPSA-I is also used to shed interior lighting in response to daylight, but is designed to operate in the relatively low ambient light levels present at the ceiling in interior rooms. POJECT LOCATION/TPE California Title 24 Compliant Calibration is remote from the sensor Three application-specific models for easy selection Operation Analog series photocells are powered by Class 2 DC voltage supplied from any input terminal on a Group Switching card installed in an LICC panel. The photocells return a DC signal to the panel in proportion to the amount of light striking the photocell lens. No adjustments are needed at the photocell head. Powerful incontrol software normalizes the photocell signal and provides an easy user interface, permitting set-up of lighting control scenarios based on footcandle level setpoints. Two modes allow for basic applications where default settings produce the desired control. An advanced mode allows the setpoints, time delays and deadband to be fine-tuned for more sophisticated application requirements. Typical Advanced Mode incontrol Software Screen Features Exterior and skylight models provide flexible mounting options via ½ threaded conduit fitting No calibration or adjustments required at the photocell location; all set-up done in software Interior model mounts simply, without tools, using the provided peel and stick adhesive Color-coded flying leads and matching colorcoded terminals in panel simplify installation

32 HPSA-I LLC-1 Specifications Application Diagrams Calibration: none (controlled by system software) Input Voltage: 12VDC Sensor Output: VDC Peak Current: 4.5 ma maximum Slew ate: One minute full scale response time ire Color Code: ed: +12VDC lack: 0-4.4VDC signal to panel hite: DC common HPSA Outdoor iring Sensor Hood HPSA Sensor North #20 AG up to 250 feet #18 AG up to 1000 feet Class 2 wiring HPSA-I Indoor iring Group Switching Card inside LI Panel iring Terminals atertight J ox A C D E F G H indow Ceiling HPSA-I Sensor Located half way between window and first row of lights Operating Tempature: -40 F-140 F (-40 C- 60 C) Mounting: HPSA and HPSA-S: ½ NPT x.69 stem HPSA-I : 0.5 x.64 stem with 3M adhesive pad Housing: UV stabilized plastic Dimensions: HPSA: 2.25 x 1.28 diameter HPSA-I: 1.23 x 2.00 diameter HPSA-S: 2.25 x 1.28 diameter HPSA-S Skylight iring Light Fixture #20 AG up to 250 feet Class 2 wiring HPSA-S Sensor Skylight ell Group Switching Card inside LI Panel iring Terminals Group Switching Card inside LI Panel iring Terminals A C D E F G H Vertical Orientation Option A C D E F G H #20 AG up to 250 feet Class 2 wiring LIGHTING CONTOL PANELS System & Enclosures Ordering Catalog No. Description Application ange HPSA HPSA-I HPSA-S Outdoor analog photocell sensor, white housing Indoor analog photocell sensor, white housing Skylight analog photocell sensor, white housing FC FC FC NOTE: May be ordered with custom calibration by adding suffix "X" and stating desired range. Pub. No

33 LS-101 LightSaver LS-101 Daylighting Controller DALIGHTING CONTOLS Product Overview LCD Display Menu utton LED Status Indicator Description The LS-101 Daylighting Controller is a single zone, ON/OFF device which can be installed in an open or closed loop application to turns lights off automatically when sufficient natural daylight is present. It consists of an advanced digital multiband photosensor that measures light similar to the way the human eye perceives it, an on-board microcontroller, and an LCD display. This photosensor is positioned behind a 100Þ cone that cuts off unwanted light, preventing false triggering. Operation The LS-101 is a self-contained 24 VDC device with an extended range of fc that only requires a low voltage power pack to operate. y adjusting the setpoints, it will turn lighting systems off when the ambient light levels exceed the OFF setpoint, and will turn lighting systems back on when natural light levels have fallen far enough to warrant it. ecause of its factory presets, many set-up applications require little or no adjustment of the settings. The LS-101 is expandable with a low voltage wall switch to enable manual override or with a occupancy sensor to enable its Hold On hile Occupied feature. POJECT 100º Cone LOCATION/TPE Select utton On, Off & Deadband Settings Applications Digital Multi-and Photosensor emovable Cover The LS-101 features adjustable settings for ON setpoint, OFF setpoint and time delay, should adjustment be required. Adjusting the ON setpoint will automatically calculate your OFF setpoint to a predetermined deadband setting. The deadband can be adjusted to a value of 25%, 50%, 75% or 100% above the ON setpoint. hen the sensed light level drops below the ON setpoint for 20 seconds, the output signal will switch on. And when the sensed light level exceeds the OFF setpoint for the length of the time delay, the output signal will switch OFF. The time delay can be adjusted to 3, 10, 20 or 30 minutes. The LS-101 Daylighting Controller can be used to control any type of lighting: incandescent, fluorescent, compact fluorescent (CFL) and HID. The sensors work in peripheral offices, skylit areas, cafeterias, warehouses and any other indoor areas with natural light access. E17 Features Easy-to-read LCD Display prompts installer through set-up and accurately reflects the current control mode and light level. Four user-adjustable parameters: ON Setpoint, OFF Setpoint, OFF Setpoint Time Delay, and Hold On hile Occupied Mode (if wired with an occupancy sensor) Test Mode overrides the programmed Time Delay to allow installer to check if settings are correct. Control load status verification allows testing and confirmation that the wiring is correct by pressing the select button Manual Override for one hour (if wired with a low voltage, push-button wall switch) Meets Section 119 s requirement for daylighting in California s Title 24 Lighting Code. LED status indicator identifies if the LS-101 is in Override or Test Mode, or if the device has switched the lights on or off. Two mounting options for either top-lit or side-lit applications Low voltage leads are color coded to match wire colors on the power pack. Shape and design developed to prevent mis-alignments. Can be programmed in most daylight conditions

34 LS-101 Specifications Digital Multi-and Photosensor ange: foot candles ON Setpoint ange: foot candles Status Indicator: Multi-function green LED Power equirements: 12/24 VDC; 7 ma typical Output Signal: 24VDC; maximum 120 ma iring & Installation Location iring Diagram Neut. Hot hite lack Any 24VDC Occupancy Sensor Optional Power Pack lue Common Control Out +24VDC in lack LVS-1 Switch Optional ed ed ed Control Out +24VDC in Common Occupancy Input ellow +24VDC in Lighting Load lue ed lack hite For other wiring diagrams, please visit the CAD esource Center at LS-101 Location: Suitable for dry interior locations Environment: 32 to 120ºF, less than 90% rh Dimensions: 2.4 diameter x 0.7 deep (61mm x 17mm) Five-year warranty UL listed Mounting Installation etaining Nut Plastic asher Ceiling DALIGHTING CONTOLS Side Lighting Application Top Lighting Application Skylight LS-101 LS-101 Light Fixture indow Light Fixture Peak Sensitivity 100 Typical Daylit Zone, about 12' (3.6m) 100 Deadband Level Chart Footcandle Daylight Electric Light OFF Setpoint ON Setpoint Deadband Energy Savings Opportunity 8am 9am 10am 11am 12pm 1pm 2pm 3pm 4pm 5pm 6pm 7pm 8pm Time If the LS-101 s photosensor lighting level drops below the ON setpoint, the lights will remain on. If the sensor s lighting level rises above the OFF setpoint, the LS-101 will automatically turn the lights off. If the sensor s lighting level remains in the predetermined deadband range (25%, 50%, 75% or 100%) the lighting will be passive until the sensor s level reaches the high or low setpoints. Ordering Catalog No. Voltage Current Photosensor ange Deadband Adjustment ange LS VDC 7 ma Typical foot candles 25%, 50%, 75% & 100% above the ON setpoint Pub. No E18

35 Z-100 P o w e r P a c k s Z-100 Dual Voltage Power Pack Fully self-contained transformer and relay Dual 120/277 VAC Zero crossing for reliability and increased life Overcurrent protection (low voltage) Plenum rated Hold ON and Hold OFF inputs Product Overview Features Description The Z-100 is a full-featured power pack, providing 24 VDC operating voltage to The att Stopper s low voltage occupancy sensors. In addition, the Z enables special hold-on, hold-off and load shed applications when used with lighting control panels or building management systems. Operation The Z consists of a transformer and a high-current relay. The transformer has a primary high voltage input of 120 or 277 VAC. The secondary output, which provides the operating power for att Stopper occupancy sensors, is 24 VDC, 150 ma. This 150 ma output is available with the power pack s relay connected. The power packs receive input from occupancy sensors or light level sensors and switch lighting on and off. For example, when an occupancy sensor detects motion, it electrically closes an internal circuit which sends 24 VDC to the power pack. This closes the power pack relay and turns the lights on. Self-contained transformer relay system Primary high voltage input of 120 or 277 VAC LED indicates status of relay or if there is an overcurrent Hold-ON and hold-off inputs integrate with lighting control panels, MS and other building systems Hold-OFF input can provide load shedding function Plenum rated The Z is UL 2043 plenum rated with teflon coated low voltage leads and plenum rated plastic. This means that the power packs do not need to be installed in the junction box, but can be installed in the plenum. They are housed in AS, UL-rated 94V-0 plastic enclosures. Applications Z power packs can control lighting circuits, selfcontained air conditioners, pumps, fans, motors, VAV systems, motorized damper controls and setback thermostats. The hold-off input can be used to perform load shedding. During a power alert or during peak demand, a signal from a MS or utility meter triggers the Z to shed non-critical lighting loads. The hold-off function also works with a security system to hold some lights off during a security walk-through. The hold-on input is ideal for retail and commercial facilities that want to hold certain lighting ON during normal business hours. After-hours, a time clock signals the Z to no longer hold lights ON, allowing occupancy sensors to resume control. Hold-ON input enables method to override occupancy sensor and hold lighting ON Zero crossing circuitry for reliability and increased product life UL 2043 plenum rated plastic Can be installed directly in plenum for cost-effective installation 1/2 inch snap-in nipple attaches to standard electrical enclosures through 1/2 inch knockouts

36 Z-100 P o w e r P a c k s Specifications iring & Installation Z Technical 120/277 VAC voltage input Secondary voltage of 24 VDC Secondary output of 150 ma (with relay connected) Low voltage leads are rated for 300 volts Hold-ON and hold-off inputs for integration with lighting control panels, MS, and other building systems (5-24 VDC) UL-rated 94V-0 plastic enclosure; units are grey UL 2043 plenum rated plastic and wiring Dimensions: 1.6" x 2.75" x 1.6" (41mm x 70mm x 41mm) with a 1/2 inch snap-in nipple UL and CUL listed; Five year warranty Installation Diagram Power Pack iring with Occupancy Sensor Neut. hite lack 120VAC Hot rown 277VAC Power Pack ed Switch ed Lighting Load High voltage connection made inside J-box 5-24VDC In Hold On 5-24VDC In Hold Off ellow rown lue lack ed +24VDC Common Control Output Any 3-ire 24VDC Sensor Hold-OFF & Hold-ON Applications Load Shed (Hold-OFF) Application for Open Office Spaces Z Occupancy Sensor Z-100 Power Pack Low Voltage Line Voltage Z1 Z2 Z1 Z2 Hold-ON etail Application Hold-OFF Signal The occupancy sensor, connected to each Z, keeps all lights on when the space is occupied. Hold-OFF Signal hen the load shed command is given (by utility meter, MS, etc.), lights connected to the Z2 are held off. emaining lights, (Z1) are controlled by occupancy sensor. Occupancy Sensor Z1 Z2 Z1 Z2 Z Z-100 Power Pack Low Voltage Line Voltage Z3 Z4 Z3 Z4 Hold-ON Signal During store hours, a signal from a time clock to the Z holds lights on, regardless of occupancy. Hold-ON Signal After hours, the clock schedule cancels the hold on and occupancy sensor control takes over. Ordering Installation Notes The att Stopper, Inc. Pub. No Input Load atings Catalog No. Description/Type Voltage allast (A) Incan (A) Motor (HP) Output Z-100 Power Pack 120/277 VAC; 60 Hz * * 1 Hp rated at 120/250 VAC. ** Output is 150 ma with relay connected. 24 VDC; 150 ma** 1.All att Stopper power packs should be installed in accordance with state, local, and national electrical codes and requirements. 2.Power packs are designed to attach to existing or new electrical enclosures with 1/2 inch knockouts. (Check electrical codes in your area.) 3.Most applications require UL listed, AG, 3-conductor, Class 2 cable for low voltage wiring. For plenum return ceilings use UL listed plenum-approved cables.

37 DT-355 CA-1 DT-355 Dual Technology Line Voltage Ceiling Sensor Ceiling Mount Sensors OCCUPANC SENSOS Architecturally appealing low profile appearance SmartSet automatically selects optimal settings for each space Ultrasonic diffusers give more comprehensive coverage Product Overview Features Description att Stopper/Legrand s low profile DT-355 dual technology occupancy sensor combines the benefits of passive infrared (PI) and ultrasonic technologies. The sensor mounts on the ceiling with a flat, unobtrusive appearance and provides 360 degrees of coverage. Operation The DT-355 is line voltage and operates at 120, 230, 277 or 347 VAC. The sensor turns lighting on when both PI and ultrasonic technologies detect occupancy. PI technology senses the difference between infrared energy from a human body in motion and the background space. Ultrasonic technology uses the Doppler Principle and high frequency (40KHz) ultrasound to sense motion within the space. Once lighting is on, detection by either technology holds lighting on. hen no occupancy is detected for the length of the time delay, lighting turns off. The DT-355 can also be set so that only one technology is needed to trigger or both technologies are needed to hold lighting on. Advanced control logic based on ISC microcontroller provides: Detection Signature Processing eliminates false triggers and provides immunity to FI and EMI SmartSet automatically adjusts sensitivity and time delay settings to fit occupant patterns alk-through mode turns lights off 3 minutes after the area is initially occupied ideal for brief visits such as mail delivery POJECT LOCATION/TPE SmartSet Using SmartSet technology, the DT-355 requires no adjustment at installation. SmartSet continuously monitors the controlled space to identify usage patterns. Using this information, it automatically adjusts the time delay and sensitivity settings for optimal performance and energy efficiency. The sensor assigns short delays (as low as 5 minutes) for times when the space is usually vacant, and longer delays (up to 30 minutes) for busier times. Application Operates at 120, 230, 277 or 347 VAC, 50/60 Hz Terminal wiring for quick and easy installation alk-through mode increases savings potential att Stopper s patented dual technology has the flexibility to work in a variety of applications, where one technology alone could encounter false triggers. Ideal applications include classrooms, open office spaces, large offices, and computer rooms. In addition, because the DT-355 can be mounted onto a variety of junction boxes, the sensor has the flexibility to be used in a wide range of spaces. The sensors eliminate the need for a power pack by using line voltage wiring. uilt-in light level sensor featuring simple, one-step setup Ultrasonic diffusion technology spreads coverage to a wider area (patent pending) DIP switch simplifies sensor adjustments LEDs indicate occupancy detection Uses existing line voltage wiring and doesn t require a power pack 6 occupancy logic options give users the ability to customize control to meet application needs

38 ON ECE DT-355 CA-1 Specifications iring & Mounting Controls & Settings Coverage 120/230/277/347 VAC, 50/60 Hz Ultrasonic frequency of 40kHz Time delays: SmartSet (automatic), fixed (5, 10, 15, 20, or 30 minutes), walk-through, test-mode Sensitivity adjustment: SmartSet (automatic) or reduced sensitivity (for PI sensitivity); ultrasonic sensitivity is variable with trimpot uilt-in light level sensor works from 10 to 300 footcandles (107.6 to 3,229.2 lux) DT-355 iring Diagram Load Load Ground (Optional) Product Controls Ultrasonic sensitivity trimpot DIP switches Ultrasonic transducer cones Ultrasonic activity LED (Green) 40 ft x 40 ft (12.2m x 12.2m) Light level pushbutton Neutral Hot Neutral Keyhole slots (for mounting to 4" octagonal box) Double gang mudring mounting holes PI Activity LED (ed) PI lens 44 ft (13.4m) Multi-level, 360 Fresnel lens for superior occupancy detection Mounting options: 4 square junction box with double gang mudring; 4 inch octagonal junction box Dimensions: 4.50" diameter x 1.45 deep (114.3mm x 25.9mm) UL and CUL listed; Five year warranty Ceiling Mounting DIP Switch Settings = ON = OFF Occupancy Switch# Logic Standard Option 1 Option 2 Option 3 Option 4 Option 5 Option 6 Option 7 Time Delay sec/smartset 5 minutes 10 min. 10 minutes 15 min. 15 minutes 20 minutes 30 min. = walk-through mode 4" Square, 2.25" Deep* Junction ox with Double Gang Mudring attached CA-1 Adapter ear Housing Sensor Flange Screws Front Cover Drop Ceiling PI Sensitivity Minimum Max./SmartSet The technology control (occupancy logic) options are adjustable by user. The standard setting (recommended for most applications) is both technologies to trigger on, either to hold on. Coverage shown is maximum and represents half-step walking motion. Under ideal conditions, coverage for half-step walking motion can reach up to 1000 ft 2 (92.9 m 2 ). Occupancy Logic Initial Occupancy Maintain Occupancy e-trigger (seconds duration) Trigger Standard oth Either Option 1 Either Either Option 2 PI Either Option 3 oth oth Option 4 PI PI Option 5 Ultra Ultra Option 6 Man. Either Option 7 Man. oth LEDs 7 Disabled Enabled 8 Either(5) Either(5) Either(5) oth(5) PI(5) Ultra(5) Either(30) oth(30) OCCUPANC SENSOS Ceiling Mount Sensors Ordering Catalog No. Voltage Load equirement Coverage DT VAC, 50/60 Hz 230/277 VAC, 50/60 Hz 347 VAC, 50/60 Hz allast/tungsten allast allast up to 1000 ft 2, (92.9 m 2 ) Pub. No CA-1 Sensors are white. Cosmetic adapter for ceiling installations with 4 square j-box or iremold #V5752 box

39 DT-305 O c c u p a n c y S e n s o r s DT-300 Low Voltage 360 Dual Tech Sensor Architecturally appealing low profile appearance Accepts low voltage switch input for manual-on operation SmartSet automatically selects optimal settings for each space Depluggable terminal wiring for quick and easy installation Ultrasonic diffusers give more comprehensive coverage alk-through mode increases savings potential Product Overview Features Description The att Stopper s low profile DT-300 dual technology occupancy sensor combines the benefits of passive infrared (PI) and ultrasonic technologies. The sensor mounts on the ceiling with a flat, unobtrusive appearance and provides 360 degrees of coverage. Operation The DT-300 turns lighting on when both PI and ultrasonic technologies detect occupancy. It can also work with a low voltage switch for manual-on operation. PI technology senses the difference between infrared energy from a human body in motion and the background space. Ultrasonic technology uses the Doppler Principle and high frequency (40KHz) ultrasound to sense motion within the space. Once lighting is on, detection by either technology holds lighting on. hen no occupancy is detected for the length of the time delay, lighting turns off. The DT- 300 can also be set so that only one technology is needed to trigger or both technologies are needed to hold lighting on. The sensors are low voltage and utilize a att Stopper power pack. Advanced control logic based on ISC microcontroller provides: Detection Signature Processing eliminates false triggers and provides immunity to FI and EMI SmartSet automatically adjusts sensitivity and time delay settings to fit occupant patterns alk-through mode turns lights off 3 minutes after the area is initially occupied ideal for brief visits such as mail delivery Available with built-in light level sensor featuring simple, one-step setup SmartSet Using SmartSet technology, the DT-300 requires no adjustment at installation. SmartSet continuously monitors the controlled space to identify usage patterns. Using this information, it automatically adjusts the time delay and sensitivity settings for optimal performance and energy efficiency. The sensor assigns short delays (as low as 5 minutes) for times when the space is usually vacant, and longer delays (up to 30 minutes) for busier times. Applications The att Stopper s patented dual technology has the flexibility to work in a variety of applications, where one technology alone could encounter false triggers. Ideal applications include classrooms, open office spaces, large offices, and computer rooms. In addition, because the DT-300 mounting system makes it easy to install in ceiling tiles or to junction boxes, the sensor has the flexibility to be used in a wide range of spaces. The DT-300 works with low voltage momentary switches to provide manual control Ultrasonic diffusion technology spreads coverage to a wider area (patent pending) LEDs indicate occupancy detection Uses depluggable, terminal wiring system for quick and easy installation 8 occupancy logic options give users the ability to customize control to meet application needs Available with isolated relay for integration with AS or HVAC

40 ON ECE DT-305 O c c u p a n c y S e n s o r s Specifications DT-300 Technical 24 VDC/VAC and halfwave rectified AC Ultrasonic frequency of 40kHz Time delays: SmartSet (automatic), fixed (5, 10, 15, 20, or 30 minutes), walk-through, test-mode Sensitivity adjustment: SmartSet (automatic) or reduced sensitivity (for PI sensitivity); ultrasonic sensitivity is variable with trimpot uilt-in light level sensor (DT-300) works from 10 to 300 footcandles Low voltage, momentary switch input for manual operation DT-300 contains an isolated relay with N/O and N/C outputs; rated for 1 30 VDC/VAC Multi-level, 360 Fresnel lens for superior occupancy detection Units per power pack: DT-300: up to 2 (), up to 3 (Z); DT-305: up to 3 (), up to 4 (Z) Dimensions: 4.50" diameter x 1.02 deep (114.3mm x 25.91mm) UL and CUL listed; Five year warranty iring & Mounting DT-300 iring Diagram hite (Neutral) Ceiling Mounting ed (Line) N Hot hite lack Power Pack ed (Load) Switch Lighting load Ceiling Hot N Auxiliary elay Pack lue lack OFF switch ed (load) ed lack lue Light level lighting load Isolated elay Outputs Common Normally Open Contact Normally Closed Contact Momentary Switch elay Common N.O. N.C. Light Level (24VDC Out) Control (24VDC) Out Man. Switch +24V (In) Common DT-300 Terminals iring diagram includes bi-level control and manual-on option with momentary switch Depluggable terminal Spring clips (2) ear housing Front cover DT-300 Product Controls DIP Switch Settings Coverage Ultrasonic sensitivity trimpot DIP switches Ultrasonic transducer cones Ultrasonic activity LED (Green) Light level pushbutton Keyhole slots (for mounting to 4" octagonal box) Double gang mudring mounting holes PI Activity LED (ed) PI lens = Factory Setting Switch# = ON = OFF Logic Standard Option 1 Option 2 Option 3 Option 4 Option 5 Option 6 Option 7 Occupancy Time Delay sec/smartset 5 minutes 10 min. 10 minutes 15 min. 15 minutes 20 minutes 30 min. = walk-through mode Occupancy Logic Initial Occupancy Maintain Occupancy e-trigger (seconds duration) Trigger Standard oth Either Either(5) Option 1 Either Either Either(5) Option 2 PI Either Either(5) Option 3 oth oth oth(5) Option 4 PI PI PI(5) Option 5 Ultra Ultra Ultra(5) Option 6 Man. Either Either(30) Option 7 Man. oth oth(30) LEDs 7 Disabled Enabled PI Sensitivity Minimum Max./SmartSet 8 38 ft 40 ft The technology control (occupancy logic) options are adjustable by user. The standard setting (recommended for most applications) is both technologies to trigger on, either to hold on. Coverage shown is maximum and represents half-step walking motion. Under ideal conditions, coverage for half-step walking motion can reach up to 1000 sq ft. Ordering The att Stopper, Inc. Pub. No Catalog No. Description Voltage Current Coverage DT-300 DT-305 Dual technology sensor, 360 w/light level & isolated relay Dual technology sensor, VDC/VAC 24 VDC/VAC 43 ma 35 ma up to 1000 sq ft up to 1000 sq ft Sensors are white and use att Stopper power packs. Current consumption can be slightly higher when only one sensor per power pack is used.

41 P-100* *- Specify Color P-100 Passive Infrared all Switch Sensor all Switches OCCUPANC SENSOS High sensitivity and dense coverage for exceptional performance Color-matched lens and low profile for appealing design Product Overview Description The P-100 passive infrared (PI) wall switch sensor turns lights ON and OFF based on occupancy. It is characterized by high sensitivity to small and large movements, appealing aesthetics, and variety of features. Operation The P-100 replaces existing wall switches and fits in a single gang junction box. It uses advanced PI technology to detect occupancy and turns lighting ON. Once the space is vacated and the time delay elapses, lights automatically turn OFF. DIP switch settings allow for a variety of control options such as Auto-ON or Manual-ON operation, walk-through, and test modes. POJECT LOCATION/TPE Multiple features such as selectable walk-through, test and presentation modes SmartSet technology for increased energy savings Part of a new comprehensive line of PI, Ultrasonic and Dual Technology wall switch sensors SmartSet Using SmartSet technology, the P-100 continuously monitors the controlled space to identify usage patterns and automatically adjust the time delay for optimal energy efficiency. The sensor assigns short delays (as low as seven minutes) for times when the space is usually vacant, and longer delays (up to 30 minutes) for busier times. SmartSet is also able to differentiate electrical noise from human motion for greater performance. Applications The P-100 sensor is well suited for small, enclosed spaces with clear line of sight of the occupant. Common applications include small office, small conference room and lunch/break rooms. Features Detection Signature Processing eliminates false triggers and provides immunity to FI and EMI Zero-crossing for long relay life Vandal resistant lens combines precise coverage with durability Choice of Auto-ON or Manual-ON operation Selectable SmartSet automatically adjusts time delay for maximum savings Selectable walk-through mode turns lights off three minutes after the room is initially occupied if no motion is detected after the first 30 seconds Selectable test mode allows quick and easy adjustments Selectable audible and/or visual alerts for impending shutoff In automatic mode, sensor returns automatically to Auto-ON after lights are turned off manually; ideal for presentations LED indicates occupancy detection Features built-in light level sensing with simple, one-step setup Override mode allows sensor to operate as a service switch in the unlikely event of a failure NEMA D 7 guideline utilized for coverage testing

42 P-100* *- Specify Color Specifications Controls & Settings Coverage & iring Ordering DELA ALK PI 50 % TIGGE ALETS L 1 MAN L 2 MAN Coverage Pattern Major motion Minor motion PI Coverage 35 (10.6m) 20 (6.1m) 4 (1.2m) 0 15 (4.5m) 7.5 (2.2m) 20 (6.1m) 35 (10.6m) ON/OFF utton DIP Switches Detection LED PI Lens Coverage: Major motion 35 x 30 Minor motion 20 x 15 Sensitivity adjustment: PI (high/low) Dimensions: 2.73" x 1.76" x 1.83" (69.3mm x 44.7mm x 46.5mm) L x x D UL and CUL listed; five year warranty DIP Switch Settings Time Delay Auto/Test 5 minutes 10 minutes 15 minutes 20 minutes 25 minutes 30 minutes override alk-through 4 Disabled Enabled ypass occupancy & light level functions. Loads are manually controlled with P-200 buttons. P-100/347 Single Level Lighting Neutral Line Ground Ground * For best performance, att Stopper/Legrand recommends using this sensor in spaces no larger than 15 x 12 *- Specify Color Catalog No. Color Voltage Load ating P-100: 120/230/277 VAC; 50/ VAC, ballast or tungsten,1/6 230/277 VAC, ballast P : 347 VAC; 50/60Hz, ballast Time delays: SmartSet (automatic), fixed (5, 10, 15, 20, 25 or 30 minutes), walk-through, testmode Product Controls P-100- P-100-LA P-100-I P-100-G P-100- P P LA P I P G P hite Lt. Almond Ivory Grey lack hite Lt. Almond Ivory Grey lack 120/230/277 VAC; 50/60 Hz 347 VAC; 50/60 Hz att allast lack Green/ellow Green ON Time Delay elay 1 Mode Visible Not Used Alerts 7 8 alk-through Audible Alerts PI Sensitivity PI Sensitivity 5 High Low, 50% Visible Alert Disabled 120 VAC, ballast or tungsten,1/6 230/277 VAC, ballast 6 9 Audible Alert Disabled Enabled elay 1 Mode Auto On Manual On =ON =OFF =Factory Setting One ASP-211 single-gang cover plate included. Order ASP-422 for blank 2-gang cover plate, ASP-432 for 2-gang cover plate with switch option (specify color). ed Load 7 8 OCCUPANC SENSOS all Switches Pub. No

43 TS * T i m e a n d A u t o m a t i c S w i t c h e s TS-400, TS Digital Time Switch Automatically turns lights off after preset time Terminal style wiring for simplified installation right electroluminescent LCD shows timer s countdown Optional audible or visual alerts before lights turn off Digital operation and simple pushbutton set-up Time scroll features allows timer to adjust up or down POJECT LOCATION/TPE Product Overview Description The InteliSwitch TS-400 series digital time switches automatically turn lights off after a preset time. The simple pushbutton operation provides users with convenient time out lighting control without the nuisance of twist timers. Operation The TS replaces an existing wall switch. The TS- 400 operates between 100 and 300 volts and for low voltage applications, the TS operates at 24 VDC/ VAC. Pressing the TS s on/off button turns lights on. The lights will remain on for the duration of the time-out setting which is adjustable from 5 minutes to 12 hours. Lights can be turned off before the time-out setting expires by pressing the on/off button. Also, the unit can be reset at any time by holding down the on/off button for 2 seconds. This will bring the timer back to its original time out setting and restart the countdown. Time Scroll Overrides The time scroll option allows users to temporarily override the time out setting without adjusting the settings. Time scroll is selected with the calibration button. ith time scroll programmed to UP, lights can be held on longer than the time out period. ith time scroll programmed to down DN, lights can be turned off sooner than the time out period. Pressing the on/off switch for more than 4 seconds causes the timer to scroll in the set direction throughout the possible time out settings. Applications The TS is an ideal lighting control choice in equipment rooms, storage areas, and closets. The switch can also be used as an HVAC override or to control heat lamps in hotel guest rooms. The low voltage TS can switch loads that exceed the ratings of standard wall switches and can be used in locations where high voltage wiring in walls is prohibited. Also, when used with a att Stopper power pack, the TS can control lighting and motor loads. Features Time-out settings range from 5 minutes to 12 hours for flexibility in fitting many applications Optional flash and beep warnings allow time to reset the switch if someone is present Time scroll option provides temporary override of the preset time out period Simple reset feature for returning the switch to its original preset time-out setting Electroluminescent back-lit LCD shows timer countdown Terminal style wiring simplifies installation Zero crossing reduces stress on the relay and increases product longevity Pushbutton programming gives the TS an easy set up process Setting the time-out for 2 hours and time scroll to down allows Title 24 compliance for using override switches

44 ON 1 +24V IN COMM. N.C. L COMM. N.O. PULSE ON PULSE OFF ON 1 ON 1 ON 1 ON 1 ON 1 TS * T i m e a n d A u t o m a t i c S w i t c h e s Specifications Controls & Installation TS-400, TS Technical TS-400: Universal 120/230/277 VAC; 50/60 Hz TS : 24 VAC/VDC/VAC half-wave rectified input; current draw is 12 ma DC, 41 ma AC Time-out adjustments range from 5 minutes to 12 hours (5 minute increments to 1 hour, then 15 minute increments to 12 hours) Optional visual warning: flashes lights at 5 minutes and 1 minute prior to time-out Optional audible warning: beeps every 5 seconds at 1 minute prior to time-out Product Controls Electroluminescent LCD TS contains single-pole, double-throw isolated relay rated for 30 VDC No minimum load requirement Compatible with all electronic ballasts and motor loads Dimensions: 2.66" x 1.79" x 1.76 (67.5mm x 45.5mm x 44.7mm) UL and CUL listed; Five year warranty Installation Calibration button ON/OFF pushbutton TS-400 TS iring TS-400 Single Level Lighting Hot Neutral Load TS ay Lighting Neutral Load Hot Line Load Ground Line Load Ground Line Load Ground TS with Lighting Control Panel TS with Power Pack hite (Neutral) InteliSwitch Digital Time Switch TS V IN (LU) COMM. (HT) PULSE OFF (LK) PULSE ON (ED) #20/4 To Panel 1000' MAX. To circuit On Off Comm 24Vect ed lack hite lue hite Neut lack Hot L COMM COMM N.O. +24V IN ed (Line) Power Pack lue lack ed Lighting Load ed (Load) Local OFF Switch For optimal performance, use att Stopper power packs. Ordering *- Specify Color att Stopper/Legrand Pub. No Catalog No. Color Voltage Load equirement TS-400- TS-400-I TS-400-A TS-400- TS-400-G hite Ivory Lt. Almond lack Grey 120 VAC; 50/60 Hz or 230/277 VAC; 50/60 Hz att ballast att ballast or TS TS I TS A TS TS G hite Ivory Lt. Almond lack Grey 24 VAC/VDC/VAC rect. Current: 12 ma; DC / 41 ma AC One ASP-211 single-gang cover plate included. Order ASP-422 for blank 2-gang cover plate, ASP-432 for 2-gang cover plate with switch option (specify color). The TS works with att Stopper power packs.

45 PI O c c u p a n c y S e n s o r s PI Passive Infrared Occupancy Sensor PI occupancy sensor turns lights on and off based on occupancy ASIC technology reduces components and provides greater reliability User-adjustable time delay of 30 sec to 30 min 30 segment multi-element Fresnel lens Product Overview Description The att Stopper PI is a versatile ceiling mount passive infrared occupancy sensor that turns lights on and off based on occupancy. The PI controls lighting in a wide variety of applications, but is especially adept at controlling small spaces with well defined coverage. Operation hen the PI sensor detects a change in the infrared heat radiated within the controlled area, lighting (or HVAC) systems are switched ON through a att Stopper power pack. The 24 VDC sensor controls the power pack through low voltage wiring. hen occupants leave the area, lighting is switched OFF after the user-adjustable time delay elapses. Fresnel Lens and Coverage The PI is equipped with a multi-element Fresnel lens that allows the sensor to efficiently collect infrared energy and provides optical gain over a defined field of view. The profile of each groove facet is determined by computer simulation to produce the sharpest images possible from a distant object. The use of a 30 segment lens allows overlapping coverage within the defined field of view. The coverage is partially determined by the view available to the sensor. Mounted to a wall, the PI will produce a completely different viewing pattern. Zone 4 and 5 (see diagram on back) are then capable of sensing up to 45 feet. Applications The PI can effectively cover small offices, utility areas, or computer rooms. Additional applications include racquetball courts, garage areas, library aisle ways, and storage rooms. Features ASIC technology enhances reliability; provides immunity to FI & EMI Uses passive infrared (PI) technology to reliably control lighting in a variety of applications User-adjustable time delay of 30 seconds to 30 minutes A daylight filter ensures that the device will be insensitive to short-wavelength infrared waves such as those emitted by the sun A multi-element Fresnel lens allows the sensor to efficiently collect infrared energy and provides optical gain over a defined field of view Alternate viewing patterns depending on mounting choice Optional ON override through logic key/on bypass LED indicates occupancy detection

46 PI O c c u p a n c y S e n s o r s Specifications PI Technical Dual-element, temperature compensated pyroelectric sensor Time delay adjustment from 30 seconds to 30 minutes Poly I4 lens, optical filter material Control output 100mA maximum Units per power pack: up to 8 (); up to 10 (Z) Dimensions: 2.5" x 2.5" x 1.14" (64mm x 64mm x 29mm) ( x L x D) UL and CUL listed; five year warranty iring & Controls iring Diagram Neutral hite Hot lack Power Pack ed ed Load Load Product Controls LED Indicator Time Delay Adjustment SENSE TIME Sensitivity Adjustment Override Mounting Holes ed lack lue Switch Sensor indow PI Sensor Factory settings: 30 min. time delay, maximum sensitivity Coverage & Placement Coverage Typical Office Placement Horizontal Pattern for Ceiling Mount Zone 1 Zone 2 Zone 3 Zone 4 Zone 5 Sensor Vertical Pattern for Ceiling Mount For an enclosed office, the PI should be placed in the corner of the room so that it will detect occupants as they enter the room. For the aisle way between bookstacks, the PI should be placed at the end of each bookstack to detect occupancy upon entrance to the aisle way from either direction. For longer bookstacks, 2 or more PIs can be used Ordering The att Stopper, Inc. Pub. No Ceiling Height 8' 10' 12' 15' 20' 25' *8' Catalog No. Description Voltage Current Coverage PI Zone Zone Detection Zones Zone Zone Passive infrared ceiling sensor Zone * all mounted Horizontally All units are white and use att Stopper power packs. Aisleway Library ookstack Placement PI Sensor ookstack Fixture 24 VDC 14 ma 300 sq ft

47 E * *- Specify Color O c c u p a n c y S e n s o r s E Low Voltage Outdoor Motion Sensor 24 VDC operation Adjustable light level and time delay settings ated for use in temperature range of -40 to 130 F 270 or 180 degree field of view orks with DM-105-P for high/low control of outdoor HID lighting eatherproof and raintight for reliable performance POJECT LOCATION/TPE Product Overview Description att Stopper/Legrand s E outdoor motion sensors provide occupancy based control of outdoor lighting. aintight and rated for -40 F to 130 F, E sensors perform reliably in all weather conditions. Operation E sensors operate at 24 VDC and are mounted onto a standard, outdoor junction box. Utilizing advanced PI technology, the sensors detect the difference between infrared energy in motion and the background space to turn lighting on when a person or vehicle enters the coverage area. After the area is vacated and the time delay elapses, lighting automatically turns off. The E s dual PI detectors and three level lens increase the detection density as well as the accuracy of motion detection. Applications The low voltage E sensors are ideal to use in conjunction with att Stopper DM-105-P outdoor HID control module. Here, the E allows the outdoor HID lighting to switch between high and low based on motion detection. Applications include walkways, parking lots, dock lighting and warehouses. hen used with a power pack, the low voltage E also provides an outdoor lighting control solution for areas where line voltage is not available or where the load is too large for a single line voltage sensor to handle. Features Sensors can be mounted on walls, eaves, or ceilings for installation convenience 180 or 270 coverage patterns Front rotates for easy coverage adjustment Precision, double-shot tooling with internal silicon gaskets prevents water and dust contamination Optional override-on to turn lights on remotely for the length of the time delay User-adjustable time delay from 12 seconds to 16 minutes Adjustable light level setting allows users to set the level at which lighting will turn on upon occupancy ASIC enhances reliability and helps to eliminate false triggers Pulse Count Processing eliminates false triggers and provide FI and EMI immunity Includes hardware for mounting sensor to standard 4 round outdoor junction box

48 E * *- Specify Color O c c u p a n c y S e n s o r s Specifications E Technical Operating temperature range -40 F to +130 F UL 773A rated raintight 24 VDC operation E-205: 270 coverage; E-105: 180 coverage Adjustable light level of 0.5 to 200 footcandles (5.4-2,152.8 lux) 1/2 threaded nipple fits standard NEMA weatherproof fixture fitting Sensor dimensions: 6.7" x 3.2" x 2.2" (170mm x 80mm x 55mm) Five year warranty iring & Installation Installation & Positioning Mounting Diagrams all or pole mounting Ceiling/eave mounting E iring with DM-105-P HID Control E and Power Pack iring E Sensor 24VDC Control Output from Sensor Common (eturn) from Sensor +24 VDC Out to Sensor ed lack lue N Hot hite lack ed (Line) Power Pack hite (Neutral) ed (Load) Switch Lighting Load ed lack allast lue CAP CAP H/LUE LACK HITE H/OG DM-105-P Control Output 24VDC (LU) Control eturn (LK) +24VDC (ED) E Sensor Coverage E-205 Coverage (270 ) E-105 Coverage (180 ) 90 8ft (2.4m) 9.5ft (3m) 25ft (8m) 52.5ft (16m) 8ft (2.4m) 9.5ft (3m) 25ft (8m) 52.5ft (16m) Ordering *- Specify Color Catalog No. Color Voltage Current Coverage E E G E E G Arctic white Arch. grey Arctic white Arch. grey 24 VDC 24 VDC 24 VDC 24 VDC 8 ma 8 ma 8 ma 8 ma att Stopper/Legrand Pub. No

49 T-2255 O c c u p a n c y S e n s o r s T Ultrasonic Occupancy Sensor Ultrasonic technology with 32 KHz frequency User-adjustable DIP switch time delay and sensitivity settings Utilizes advanced, omni-directional, Doppler technology 600, 1100, 2200 sq ft and hallway coverages available Advanced Signal Processing automatically adjusts detection threshold Isolated relay allows sensor to interface with building control systems Product Overview Description The att Stopper T sensors are advanced ultrasonic occupancy sensors with a 32 KHz frequency. The sensors are available in several models to control lighting in a wide variety of applications. Operation The 24 VDC ultrasonic sensors utilize advanced, omni-directional, Doppler technology. hen an ultrasonic sensor detects movement in a controlled area, it switches lighting on through a att Stopper power or auxiliary pack. The sensor controls the power pack through low voltage wiring. Once the area is vacated and the time delay has elapsed, lighting systems automatically switch off. Advanced Signal Processing The sensors use The att Stopper s Advanced Signal Processing (ASP). ASP filters out moving air noise by checking for small cyclical changes found in turbulent air. This helps to eliminate false ON problems found in sensors without ASP. Applications T sensors offer excellent control of lighting for many areas of a building. The sensors are designed to effectively control offices, restrooms, storage areas, and open office areas and can control large partitioned office spaces when configured in zone patterns. The T can be used with att Stopper AS-100 Automatic Control Switches to achieve manual-on/auto-off function when auto-on is not desired. The T sensors superior performance and ease of installation will provide fast paybacks and many years of energy savings. Features Advanced Signal Processing Circuitry helps to eliminate false ONs Utilizes advanced, omni-directional, Doppler technology for reliable occupancy detection Angled transmitter and receiver pairs help optimize sensitivity while eliminating unwanted detection from ceiling air movement Coverage ranges from 600 to 2200 square feet and 90 linear feet (for hallways) Isolated relay can interface with HVAC, EMS, or with an additional lighting load DIP switch adjustable time delay and sensitivity LED indicates occupancy detection