HOTSPOT. Industrial-suited parametrizable Infrared heat detectors with integrated signal processing and evaluation

Transcription

1 HOTSPOT-16 HOTSPOT-64 HOTSPOT-256(T) HOTSPOT-1000 HOTSPOT Industrial-suited parametrizable Infrared heat detectors with integrated signal processing and evaluation haracteristics Sturdy design with aluminium diecast housing xtensive tolerance towards humidity and dust etection of smoldering fires Fast reaction time djustable alarm thresholds for each pixel etection not effected by airflow Fast and easy installation due to pre-wired cable for power-supply and data-signals Zentrale atenerfassung und Visualisierung über P-Software entral data archiving and visualization with service P Interface-modules for common fire alarm systems such as OSH LSNi and SIMNS FNet Suitable for process monitoring pplications Open or enclosed belt conveyors for dust-explosive bulk materials Storage facilities and bunkers for spontaneously inflammable material rives, shredders, dryers, coolers, chutes and funnels Silos and mills IOS HOTSPOTs are intelligent thermographic cameras of the dvanced iscovery System ( IOS ), which was specifically created to provide reliable early fire detection in industrial surroundings. HOTSPOTs are parametrizable compact infrared camera systems with integrated signal processing and evaluation. Their sturdy design protects them against surrounding dust and humidity, which enables them to operate in rough industrial surroundings. Typical applications for HOTSPOTs are for example the detection of overheating drives or bearings of conveyor systems and the monitoring of spontaneously inflammable bulk materials on conveyor belts or in storage facilities. Power-supply and data communication for the detectors are provided over the IOS M-us. simple wiring concept with prewired IOS system cables and specially designed connection boxes keeps installation simple and fast. service P with the IOS Manager connected to an IOS M-usmaster or the IOS fire alarm panel MZ-30 can address each detector individually for advanced data-logging and parametrization features. In this way alarm thresholds can be adapted perfectly to the atmosphere around each detector. isplaying and analysing temperature curves is also a key feature of the software. V2.0-07/2015 Page 1 / 5

2 HOTSPOT - Specification Mechanical dimensions 40 20, ,5 ll dimensions in mm ,5 92, ,5 100 onnection cable Ø11 Mechanical characteristics nclosure oated aluminium diecast (corrosion-resistant) Weight 0,6 kg (without connection cable) Protection class IP 64 Thermal characteristics Relative humidity Temperature range % (non-condensing) In case of continual condensation, use internal heating lectrical characteristics Supply voltage Power consumption (without internal heating) Power consumption (with internal heating) Internal fusing M-us max. line length M-us max. line capacity M-us baudrate Limit contact alarm relay Limit contact error relay (rror-status at 2 or less) 1 V 1 2 x 375 m 2 km 200 nf 4800 baud 680 Ω, 20 m max. (larm N/O relay) 0 Ω, 4 / 20 m max. (rror N/ relay) Technical changes reserved! V2.0-07/2015 Page 2 / 5 GT Industrieelektronik GmbH Helmholtzstr. 21, Viersen, GRMNY +49(0)2162 / info@adicos.com

3 HOTSPOT-X22 - Specifications etector characteristics HOTSPOT-16/- HOTSPOT-64 HOTSPOT-256 HOTSPOT-256T HOTSPOT-1000 Sensor resolution 4 x 4 16 x 4 16 x x x 31 pixels Optical angle 41 x x x x x 53 Reaction time 1200 ms Temporal resolution 100 ms / 1000 ms (depends on configuration) IOS topology concept IOS MZ-30 xternal power-supply IOS NT V40-3 (optional) IOS- IOS M-US Further detectors IOS Service-P IOS-etectors lectrical connection ONNTION OX NT xt. Module X7 (St) X6aus (l) X6ein (l) X7 (St) X6aus (l) X6ein (l) able occupation HOTSPOT FS MZ30 / M-M LOOP LOOP M-us M-us LOOP LOOP M-us M-us olor red black red/blue Signal Supply voltage (non-polar) M-us (non-polar) pink/grey grey Fnet (+) LSN a out PM in/out a violet Fnet- ( ) LSN b2 out V Pre-alarm N/O Pre-alarm m WS out b blue Fnet (+) LSN a in PM in/out a pink Fnet- ( ) m LSN b1 in PM in b Pre-alarm N/ yellow Relay output X6 e - larm N/O white Relay output X6 a - larm N/O brown Relay output X7 a - rror N/ green Relay output X7 e - rror N/ NT / USV P P M-us M-us X6e X7e X6a X7a MZ-Module R 1 R 2 R 3 R 4 LGN: NT xt. Modul e M MZ30 / M-M NT / USV : xternal power supply : onnection-module for Fnet or LSNi : Non-IOS fire alarm panel (e.g. OSH, SIMNS) : IOS fire alarm panel MZ30 oder IOS M-usmaster N/XF : xternal power supply / uninterruptible power supply larm relay rror relay Standard Standard R1 = 680 Ω R2 = R3 = 0 Ω R4 = HOTSPOT Technical changes reserved! N2.0-02/2016 Page 3 / 5 GT Industrieelektronik GmbH Helmholtzstr. 21, Viersen, GRMNY +49(0)2162 / info@adicos.com

4 HOTSPOT- pplication Planning notes for IOS-etectors TTNTION! Planning of fire detection system for industrial surroundings requires special expertise. Placement and alignment of IOS-etectors has to be done by specialist planners! pplication example HOTSPOT with purge-air connection and HOTSPOT mounting bracket with ball joint for monitoring of a chute next to a conveyor belt HOTSPOT mounting bracket with ball joint purge-air connection 8,5 50 max Mounting bracket with ball joint Release to adjust tilt Projekt: ateityp: ateiname der Zeichnung: Technical changes Projekt: reserved! ateityp: ateiname der Zeichnung: IOS HOTSPOT 256/1000 SSM HOTSPOT _PURG_MRKT N2.0-02/2016 Page 4 / 5 IOS HOTSPOT 256/1000 SSM HOTSPOT _PURG_MRKT GT Industrieelektronik GmbH GT Helmholtzstr. 21 GmbH Tolerierung Oberflaeche Maßstab 1:2 / 3:10 Gew.: kggt Industrieelektronik GmbH ISO 8015 IN ISO 1302 Tolerierung Oberflaeche Maßstab 7:10 Gew.: kg Viersen llg. Toleranz Werkst.-Kanten Werkstoff: Helmholtzstr. 21 ISO 8015 IN ISO 1302 Helmholtzstr. Tel.: , IN ISO Viersen, 2768 m-k IN GRMNY ISO Halbzeug: +49(0)2162 / info@adicos.com Viersen llg. Toleranz Werkst.-Kanten Werkstoff: IN ISO 2768 m-k IN ISO Tel.: Halbzeug: atum Name enennung: atum Name ear. enennung: Pfeiffer HOTSPOT 256/100 with purge-air connection ear Pfeiffer Gepr. HOTSPOT 256/100 with purge-air connection

5 Order information etector escription Order-No. IOS HOTSPOT-16 Standard version with M-us module & limit value output IOS HOTSPOT-256 Standard version with 256 pixels, M-us module & limit value output IOS HOTSPOT-256 T Standard version with telephoto lens, M-us module & limit value output IOS HOTSPOT-1000 Standard version with 100 pixels, M-us module & limit value output etector for -Zone 22 escription Order-No. IOS HOTSPOT-X22 HOTSPOT-1000 for TX-Zone 22, prewired connection cable etector accessories escription Order-No. HOTSPOT purge-air connection onnections for 2 compressed air plastic tubes Ø IOS pre-alarm module Internal extension module with pre-alarm relay IOS MZ-Module LSNi Internal extension module for OSH LSNi support IOS MZ-Module Fnet Internal extension module for SIMNS Fnet support Mounting accessories escription Order-No. HOTSPOT mounting bracket Mounting bracket with ball joint for easy and stepless tilting of HOTPOTs IOS onnection and branching box for all detector types IOS mounting plate luminium sheet with mounting holes for all detector types IOS connection cable 5 m Pre-assembled with IOS bayonet-plug for all detector types (except x) IOS connection cable 10 m Pre-assembled with IOS bayonet-plug for all detector types (except x) IOS connection cable 15 m Pre-assembled with IOS bayonet-plug for all detector types (except x) IOS connection cable 20 m Pre-assembled with IOS bayonet-plug for all detector types (except x) IOS connection cable 25 m Pre-assembled with IOS bayonet-plug for all detector types (except x) IOS connection cable 30 m Pre-assembled with IOS bayonet-plug for all detector types (except x) IOS connection cable 35 m Pre-assembled with IOS bayonet-plug for all detector types (except x) IOS connection cable 40 m Pre-assembled with IOS bayonet-plug for all detector types (except x) System components escription Order-No. IOS MZ-30 ompact fire alarm panel for administration of IOS detectors IOS MZ-30 relay module 8 Internal extension module with 8 configurable output relays IOS MZ-30 relay module 24 Internal extension module with 24 configurable output relays IOS ethernet module Internal extension module for LN support for MZ-30 and M-usmaster XF IOS M-usmaster XF Master unit for IOS M-us and P connection // M-us Repeater IOS M-usmaster N Master unit for IOS M-us and P connection // M-us Repeater IOS NT-V40 3 xternal power supply with System software escription Order-No. IOS central software Software for parameterization and data-logging, for up to 5 detectors IOS central software Software for parameterization and data-logging, for up to 20 detectors IOS central software Software for parameterization and data-logging, for up to 50 detectors IOS central software Software for parameterization and data-logging, for up to 100 detectors IOS central software Software for parameterization and data-logging, unlimited detector support Maintenance accessories escription Order-No. HOTSPOT-Tester HTL100 Portable device with regulated 100 heat-plate for IOS HOTSPOTs IOS M-usmaster 3 ompact, portable M-usmaster with RS-232 interface for maintenance Technical changes reserved! N2.0-02/2016 Page 5 / 5 GT Industrieelektronik GmbH Helmholtzstr. 21, Viersen, GRMNY +49(0)2162 / info@adicos.com